watchdog: sprd: remove watchdog disable from resume fail path

[ Upstream commit f61a59acb462840bebcc192f754fe71b6a16ff99 ]

sprd_wdt_start() would return fail if the loading operation is not completed
in a certain time, disabling watchdog for that case would probably cause
the kernel crash when kick watchdog later, that's too bad, so remove the
watchdog disable operation for the fail case to make sure other parts in
the kernel can run normally.

[ chunyan: Massaged changelog ]

Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver")
Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201029023933.24548-2-zhang.lyra@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: sirfsoc: Add missing dependency on HAS_IOMEM

[ Upstream commit 8ae2511112d2e18bc7d324b77f965d34083a25a2 ]

If HAS_IOMEM is not defined and SIRFSOC_WATCHDOG is enabled,
the build fails with the following error.

drivers/watchdog/sirfsoc_wdt.o: in function `sirfsoc_wdt_probe':
sirfsoc_wdt.c:(.text+0x112):
undefined reference to `devm_platform_ioremap_resource'

Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Link: https://lore.kernel.org/r/20201108162550.27660-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: armada_37xx: Add missing dependency on HAS_IOMEM

[ Upstream commit 7f6f1dfb2dcbe5d2bfa213f2df5d74c147cd5954 ]

The following kbuild warning is seen on a system without HAS_IOMEM.

WARNING: unmet direct dependencies detected for MFD_SYSCON
  Depends on [n]: HAS_IOMEM [=n]
  Selected by [y]:
  - ARMADA_37XX_WATCHDOG [=y] && WATCHDOG [=y] && (ARCH_MVEBU || COMPILE_TEST

This results in a subsequent compile error.

drivers/watchdog/armada_37xx_wdt.o: in function `armada_37xx_wdt_probe':
armada_37xx_wdt.c:(.text+0xdc): undefined reference to `devm_ioremap'

Add the missing dependency.

Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: 54e3d9b518c8 ("watchdog: Add support for Armada 37xx CPU watchdog")
Link: https://lore.kernel.org/r/20201108162550.27660-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling

[ Upstream commit 2f5fbc4305d07725bfebaedb09e57271315691ef ]

We have a problem if we use gpio-keys and configure wakeups such that
we only want one edge to wake us up.  AKA:
  wakeup-event-action = <EV_ACT_DEASSERTED>;
  wakeup-source;

Specifically we end up with a phantom interrupt that blocks suspend if
the line was already high and we want wakeups on rising edges (AKA we
want the GPIO to go low and then high again before we wake up).  The
opposite is also problematic.

Specifically, here's what's happening today:
1. Normally, gpio-keys configures to look for both edges.  Due to the
   current workaround introduced in commit c3c0c2e18d94 ("pinctrl:
   qcom: Handle broken/missing PDC dual edge IRQs on sc7180"), if the
   line was high we'd configure for falling edges.
2. At suspend time, we change to look for rising edges.
3. After qcom_pdc_gic_set_type() runs, we get a phantom interrupt.

We can solve this by just clearing the phantom interrupt.

NOTE: it is possible that this could cause problems for a client with
very specific needs, but there's not much we can do with this
hardware.  As an example, let's say the interrupt signal is currently
high and the client is looking for falling edges.  The client now
changes to look for rising edges.  The client could possibly expect
that if the line has a short pulse low (and back high) that it would
always be detected.  Specifically no matter when the pulse happened,
it should either have tripped the (old) falling edge trigger or the
(new) rising edge trigger.  We will simply not trip it.  We could
narrow down the race a bit by polling our parent before changing
types, but no matter what we do there will still be a period of time
where we can't tell the difference between a real transition (or more
than one transition) and the phantom.

Fixes: f55c73aef890 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201211141514.v4.1.I2702919afc253e2a451bebc3b701b462b2d22344@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Fix incorrect tlvs in scan start command

[ Upstream commit f57ad6a9885e8399897daee3249cabccf9c972f8 ]

Currently 6G specific tlvs have duplicate entries which is causing
scan failures. Fix this by removing the duplicate entries of the same
tlv. This also fixes out-of-bound memory writes caused due to
adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1

Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint")
Reported-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607609124-17250-7-git-send-email-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask

[ Upstream commit 9d5522199505c761575c8ea31dcfd9a2a8d73614 ]

irqchip shared with multiple gpiochips, leads to recursive call of
gpiochip_irq_mask/gpiochip_irq_unmask which was assigned to
rqchip->irq_mask/irqchip->irq_unmask, these happens becouse of
only irqchip->irq_enable == gpiochip_irq_enable is checked.

Let's add an additional check to make sure shared irqchip is detected
even if irqchip->irq_enable wasn't defined.

Fixes: a8173820f441 ("gpio: gpiolib: Allow GPIO IRQs to lazy disable")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Link: https://lore.kernel.org/r/20201210070514.13238-1-nikita.shubin@maquefel.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Do shift on traffic class when using RoCEv2

[ Upstream commit 603bee935f38080a3674c763c50787751e387779 ]

The high 6 bits of traffic class in GRH is DSCP (Differentiated Services
Codepoint), the driver should shift it before the hardware gets it when
using RoCEv2.

Fixes: 606bf89e98ef ("RDMA/hns: Refactor for hns_roce_v2_modify_qp function")
Fixes: fba429fcf9a5 ("RDMA/hns: Fix missing fields in address vector")
Link: https://lore.kernel.org/r/1607650657-35992-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Normalization the judgment of some features

[ Upstream commit 4ddeacf68a3dd05f346b63f4507e1032a15cc3cc ]

Whether to enable the these features should better depend on the enable
flags, not the value of related fields.

Fixes: 5c1f167af112 ("RDMA/hns: Init SRQ table for hip08")
Fixes: 3cb2c996c9dc ("RDMA/hns: Add support for SCCC in size of 64 Bytes")
Link: https://lore.kernel.org/r/1607650657-35992-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Limit the length of data copied between kernel and userspace

[ Upstream commit 1c0ca9cd1741687f529498ddb899805fc2c51caa ]

For ib_copy_from_user(), the length of udata may not be the same as that
of cmd. For ib_copy_to_user(), the length of udata may not be the same as
that of resp. So limit the length to prevent out-of-bounds read and write
operations from ib_copy_from_user() and ib_copy_to_user().

Fixes: de77503a5940 ("RDMA/hns: RDMA/hns: Assign rq head pointer when enable rq record db")
Fixes: 633fb4d9fdaa ("RDMA/hns: Use structs to describe the uABI instead of opencoding")
Fixes: ae85bf92effc ("RDMA/hns: Optimize qp param setup flow")
Fixes: 6fd610c5733d ("RDMA/hns: Support 0 hop addressing for SRQ buffer")
Fixes: 9d9d4ff78884 ("RDMA/hns: Update the kernel header file of hns")
Link: https://lore.kernel.org/r/1607650657-35992-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-udma: Correct normal channel offset when uchan_cnt is not 0

[ Upstream commit e2de925bbfe321ba0588c99f577c59386ab1f428 ]

According to different sections of the TRM, the hchan_cnt of CAP3 includes
the number of uchan in UDMA, thus the start offset of the normal channels
are hchan_cnt.

Fixes: daf4ad0499aa4 ("dmaengine: ti: k3-udma: Query throughput level information from hardware")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201208090440.31792-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/ti-sci-intr: Fix freeing of irqs

[ Upstream commit fc6c7cd3878641fd43189f15697e7ad0871f5c1a ]

ti_sci_intr_irq_domain_free() assumes that out_irq of intr is stored in
data->chip_data and uses it for calling ti_sci irq_free() and then
mark the out_irq as available resource. But ti_sci_intr_irq_domain_alloc()
is storing p_hwirq(parent's hardware irq) which is translated from out_irq.
This is causing resource leakage and eventually out_irq resources might
be exhausted. Fix ti_sci_intr_irq_domain_alloc() by storing the out_irq
in data->chip_data.

Fixes: a5b659bd4bc7 ("irqchip/ti-sci-intr: Add support for INTR being a parent to INTR")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120631.11165-1-lokeshvutla@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/ti-sci-inta: Fix printing of inta id on probe success

[ Upstream commit b10d5fd489b0c67f59cbdd28d95f4bd9f76a62f2 ]

On a successful probe, the driver tries to print a success message with
INTA device id. It uses pdev->id for printing the id but id is stored in
inta->ti_sci_id. Fix it by correcting the dev_info parameter.

Fixes: 5c4b585d2910 ("irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120614.11109-1-lokeshvutla@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/alpine-msi: Fix freeing of interrupts on allocation error path

[ Upstream commit 3841245e8498a789c65dedd7ffa8fb2fee2c0684 ]

The alpine-msi driver has an interesting allocation error handling,
where it frees the same interrupts repeatedly. Hilarity follows.

This code is probably never executed, but let's fix it nonetheless.

Fixes: e6b78f2c3e14 ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201129135525.396671-1-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()

[ Upstream commit 85a7555575a0e48f9b73db310d0d762a08a46d63 ]

The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free.  Remove it from the list
before returning.

Fixes: 2323736dca72 ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix a mistake check for rx_stats update

[ Upstream commit f879ac8ed6c83ce05fcb53815a8ea83c5b6099a1 ]

It should be !is_multicast_ether_addr() in ieee80211_rx_h_sta_process()
for the rx_stats update, below commit remove the !, this patch is to
change it back.

It lead the rx rate "iw wlan0 station dump" become invalid for some
scenario when IEEE80211_HW_USES_RSS is set.

Fixes: 09a740ce352e ("mac80211: receive and process S1G beacons")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1607483189-3891-1-git-send-email-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: don't set set TDLS STA bandwidth wider than possible

[ Upstream commit f65607cdbc6b0da356ef5a22552ddd9313cf87a0 ]

When we set up a TDLS station, we set sta->sta.bandwidth solely based
on the capabilities, because the "what's the current bandwidth" check
is bypassed and only applied for other types of stations.

This leads to the unfortunate scenario that the sta->sta.bandwidth is
160 MHz if both stations support it, but we never actually configure
this bandwidth unless the AP is already using 160 MHz; even for wider
bandwidth support we only go up to 80 MHz (at least right now.)

For iwlwifi, this can also lead to firmware asserts, telling us that
we've configured the TX rates for a higher bandwidth than is actually
available due to the PHY configuration.

For non-TDLS, we check against the interface's requested bandwidth,
but we explicitly skip this check for TDLS to cope with the wider BW
case. Change this to
 (a) still limit to the TDLS peer's own chandef, which gets factored
     into the overall PHY configuration we request from the driver,
     and
 (b) limit it to when the TDLS peer is authorized, because it's only
     factored into the channel context in this case.

Fixes: 504871e602d9 ("mac80211: fix bandwidth computation for TDLS peers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201206145305.fcc7d29c4590.I11f77e9e25ddf871a3c8d5604650c763e2c5887a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: atmel-i2c - select CONFIG_BITREVERSE

[ Upstream commit d33a23b0532d5d1b5b700e8641661261e7dbef61 ]

The bitreverse helper is almost always built into the kernel,
but in a rare randconfig build it is possible to hit a case
in which it is a loadable module while the atmel-i2c driver
is built-in:

arm-linux-gnueabi-ld: drivers/crypto/atmel-i2c.o: in function `atmel_i2c_checksum':
atmel-i2c.c:(.text+0xa0): undefined reference to `byte_rev_table'

Add one more 'select' statement to prevent this.

Fixes: 11105693fa05 ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: max77693: Fix modalias string

[ Upstream commit e1efdb604f5c9903a5d92ef42244009d3c04880f ]

The platform device driver name is "max77693-muic", so advertise it
properly in the modalias string. This fixes automated module loading when
this driver is compiled as a module.

Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()

[ Upstream commit 88149082bb8ef31b289673669e080ec6a00c2e59 ]

If generic_drop_inode() returns true, it means iput_final() can evict
this inode regardless of whether it is dirty or not. If we check
I_DONTCACHE in generic_drop_inode(), any inode with this bit set will be
evicted unconditionally. This is not the desired behavior because
I_DONTCACHE only means the inode shouldn't be cached on the LRU list.
As for whether we need to evict this inode, this is what
generic_drop_inode() should do. This patch corrects the usage of
I_DONTCACHE.

This patch was proposed in [1].

[1]: https://lore.kernel.org/linux-fsdevel/20200831003407.GE12096@dread.disaster.area/

Fixes: dae2f8ed7992 ("fs: Lift XFS_IDONTCACHE to the VFS layer")
Signed-off-by: Hao Li <lihao2018.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: Fix possible hang in xdpsock with multiple threads

[ Upstream commit 092fde0f863b72b67c4d6dc03844f5658fc00a35 ]

Fix a possible hang in xdpsock that can occur when using multiple
threads. In this case, one or more of the threads might get stuck in
the while-loop in tx_only after the user has signaled the main thread
to stop execution. In this case, no more Tx packets will be sent, so a
thread might get stuck in the aforementioned while-loop. Fix this by
introducing a test inside the while-loop to check if the benchmark has
been terminated. If so, return from the function.

Fixes: cd9e72b6f210 ("samples/bpf: xdpsock: Add option to specify batch size")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201210163407.22066-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: gpmi: Fix the random DMA timeout issue

[ Upstream commit 7671edeb193910482a9b0c22cd32176e7de7b2ed ]

To get better performance, current gpmi driver collected and chained all
small DMA transfers in gpmi_nfc_exec_op, the whole chain triggered and
wait for complete at the end.

But some random DMA timeout found in this new driver, with the help of
ftrace, we found the root cause is as follows:

Take gpmi_ecc_read_page() as an example, gpmi_nfc_exec_op collected 6
DMA transfers and the DMA chain triggered at the end. It waits for bch
completion and check jiffies if it's timeout. The typical function graph
shown below,

   63.216351 |   1)               |  gpmi_ecc_read_page() {
   63.216352 |   1)   0.750 us    |    gpmi_bch_layout_std();
   63.216354 |   1)               |    gpmi_nfc_exec_op() {
   63.216355 |   1)               |      gpmi_chain_command() {
   63.216356 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216357 |   1)               |          /* mxs chan ccw idx: 0 */
   63.216358 |   1)   1.750 us    |        }
   63.216359 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216360 |   1)               |          /* mxs chan ccw idx: 1 */
   63.216361 |   1)   2.000 us    |        }
   63.216361 |   1)   6.500 us    |      }
   63.216362 |   1)               |      gpmi_chain_command() {
   63.216363 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216364 |   1)               |          /* mxs chan ccw idx: 2 */
   63.216365 |   1)   1.750 us    |        }
   63.216366 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216367 |   1)               |          /* mxs chan ccw idx: 3 */
   63.216367 |   1)   1.750 us    |        }
   63.216368 |   1)   5.875 us    |      }
   63.216369 |   1)               |      /* gpmi_chain_wait_ready */
   63.216370 |   1)               |      mxs_dma_prep_slave_sg() {
   63.216372 |   1)               |        /* mxs chan ccw idx: 4 */
   63.216373 |   1)   3.000 us    |      }
   63.216374 |   1)               |      /* gpmi_chain_data_read */
   63.216376 |   1)               |      mxs_dma_prep_slave_sg() {
   63.216377 |   1)               |        /* mxs chan ccw idx: 5 */
   63.216378 |   1)   2.000 us    |      }
   63.216379 |   1)   1.125 us    |      mxs_dma_tx_submit();
   63.216381 |   1)   1.000 us    |      mxs_dma_enable_chan();
   63.216712 |   0)   2.625 us    |  mxs_dma_int_handler();
   63.216717 |   0)   4.250 us    |  bch_irq();
   63.216723 |   0)   1.250 us    |  mxs_dma_tasklet();
   63.216723 |   1)               |      /* jiffies left 250 */
   63.216725 |   1) ! 372.000 us  |    }
   63.216726 |   1)   2.625 us    |    gpmi_count_bitflips();
   63.216730 |   1) ! 379.125 us  |  }

but it's not gurantee that bch irq handled always after dma irq handled,
sometimes bch_irq comes first and gpmi_nfc_exec_op won't wait anymore,
another gpmi_nfc_exec_op may get invoked before last DMA chain IRQ
handled, this messed up the next DMA chain and causes DMA timeout. Check
the trace log when issue happened.

   63.218923 |   1)               |  gpmi_ecc_read_page() {
   63.218924 |   1)   0.625 us    |    gpmi_bch_layout_std();
   63.218926 |   1)               |    gpmi_nfc_exec_op() {
   63.218927 |   1)               |      gpmi_chain_command() {
   63.218928 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218929 |   1)               |          /* mxs chan ccw idx: 0 */
   63.218929 |   1)   1.625 us    |        }
   63.218931 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218931 |   1)               |          /* mxs chan ccw idx: 1 */
   63.218932 |   1)   1.750 us    |        }
   63.218933 |   1)   5.875 us    |      }
   63.218934 |   1)               |      gpmi_chain_command() {
   63.218934 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218935 |   1)               |          /* mxs chan ccw idx: 2 */
   63.218936 |   1)   1.875 us    |        }
   63.218937 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218938 |   1)               |          /* mxs chan ccw idx: 3 */
   63.218939 |   1)   1.625 us    |        }
   63.218939 |   1)   5.875 us    |      }
   63.218940 |   1)               |      /* gpmi_chain_wait_ready */
   63.218941 |   1)               |      mxs_dma_prep_slave_sg() {
   63.218942 |   1)               |        /* mxs chan ccw idx: 4 */
   63.218942 |   1)   1.625 us    |      }
   63.218943 |   1)               |      /* gpmi_chain_data_read */
   63.218944 |   1)               |      mxs_dma_prep_slave_sg() {
   63.218945 |   1)               |        /* mxs chan ccw idx: 5 */
   63.218947 |   1)   2.375 us    |      }
   63.218948 |   1)   0.625 us    |      mxs_dma_tx_submit();
   63.218949 |   1)   1.000 us    |      mxs_dma_enable_chan();
   63.219276 |   0)   5.125 us    |  bch_irq();                  <----
   63.219283 |   1)               |      /* jiffies left 250 */
   63.219285 |   1) ! 358.625 us  |    }
   63.219286 |   1)   2.750 us    |    gpmi_count_bitflips();
   63.219289 |   1) ! 366.000 us  |  }
   63.219290 |   1)               |  gpmi_ecc_read_page() {
   63.219291 |   1)   0.750 us    |    gpmi_bch_layout_std();
   63.219293 |   1)               |    gpmi_nfc_exec_op() {
   63.219294 |   1)               |      gpmi_chain_command() {
   63.219295 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219295 |   0)   1.875 us    |  mxs_dma_int_handler();      <----
   63.219296 |   1)               |          /* mxs chan ccw idx: 6 */
   63.219297 |   1)   2.250 us    |        }
   63.219298 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219298 |   0)   1.000 us    |  mxs_dma_tasklet();
   63.219299 |   1)               |          /* mxs chan ccw idx: 0 */
   63.219300 |   1)   1.625 us    |        }
   63.219300 |   1)   6.375 us    |      }
   63.219301 |   1)               |      gpmi_chain_command() {
   63.219302 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219303 |   1)               |          /* mxs chan ccw idx: 1 */
   63.219304 |   1)   1.625 us    |        }
   63.219305 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219306 |   1)               |          /* mxs chan ccw idx: 2 */
   63.219306 |   1)   1.875 us    |        }
   63.219307 |   1)   6.000 us    |      }
   63.219308 |   1)               |      /* gpmi_chain_wait_ready */
   63.219308 |   1)               |      mxs_dma_prep_slave_sg() {
   63.219309 |   1)               |        /* mxs chan ccw idx: 3 */
   63.219310 |   1)   2.000 us    |      }
   63.219311 |   1)               |      /* gpmi_chain_data_read */
   63.219312 |   1)               |      mxs_dma_prep_slave_sg() {
   63.219313 |   1)               |        /* mxs chan ccw idx: 4 */
   63.219314 |   1)   1.750 us    |      }
   63.219315 |   1)   0.625 us    |      mxs_dma_tx_submit();
   63.219316 |   1)   0.875 us    |      mxs_dma_enable_chan();
   64.224227 |   1)               |      /* jiffies left 0 */

In the first gpmi_nfc_exec_op, bch_irq comes first and gpmi_nfc_exec_op
exits, but DMA IRQ still not happened yet until the middle of following
gpmi_nfc_exec_op, the first DMA transfer index get messed and DMA get
timeout.

To fix the issue, when there is bch ops in DMA chain, the
gpmi_nfc_exec_op should wait for both completions rather than bch
completion only.

Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op")
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201209035104.22679-3-han.xu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: meson: Fix a resource leak in init

[ Upstream commit ad8566d3555c4731e6b48823b92d3929b0394c14 ]

Call clk_disable_unprepare(nfc->phase_rx) if the clk_set_rate() function
fails to avoid a resource leak.

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/X8ikVCnUsfTpffFB@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: gpmi: fix reference count leak in gpmi ops

[ Upstream commit 1b391c7f2e863985668d705f525af3ceb55bc800 ]

pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. If runtime of the device has
error or device is in inaccessible state(or other error state),
resume operation will fail. If we do not call put operation to
decrease the reference, it will result in reference leak in
the two functions(gpmi_init and gpmi_nfc_exec_op). Moreover,
this device cannot enter the idle state and always stay busy or
other non-idle state later. So we fixed it through adding
pm_runtime_put_noidle.

Fixes: 5bc6bb603b4d0 ("mtd: rawnand: gpmi: Fix suspend/resume problem")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201107110552.1568742-1-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra: Fix duplicated SE clock entry

[ Upstream commit 5bf5861d6ea6c3f4b38fc8fda2062b2dc44ac63d ]

The periph_clks[] array contains duplicated entry for Security Engine
clock which was meant to be defined for T210, but it wasn't added
properly. This patch corrects the T210 SE entry and fixes the following
error message on T114/T124: "Tegra clk 127: register failed with -17".

Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210")
Tested-by Nicolas Chauvet <kwizart@gmail.com>
Reported-by Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc7180: Use floor ops for sdcc clks

[ Upstream commit 6d37a8d192830267e6b10a6d57ae28d2e89097e7 ]

I would repeat the same commit message that was in commit 5e4b7e82d497
("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems
silly to do so when you could just go read that commit.

NOTE: this is actually extra terrible because we're missing the 50 MHz
rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add
50 MHz clock rate for SDC2")).  That means then when you run an older
SD card it'll try to clock it at 100 MHz when it's only specced to run
at 50 MHz max.  As you can probably guess that doesn't work super
well.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc/mediatek: unprepare clk if scp_before_load fails

[ Upstream commit 22c3df6f5574c8d401ea431c7ce24e7c5c5e7ef3 ]

Fixes the error handling to unprepare clk if scp_before_load fails.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: fd0b6c1ff85a ("remoteproc/mediatek: Add support for mt8192 SCP")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201203155914.3844426-1-tzungbi@google.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom: Fix potential NULL dereference in adsp_init_mmio()

[ Upstream commit c3d4e5b12672bbdf63f4cc933e3169bc6bbec8da ]

platform_get_resource() may fail and in this case a NULL dereference
will occur.

Fix it to use devm_platform_ioremap_resource() instead of calling
platform_get_resource() and devm_ioremap().

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t,
n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607392460-20516-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: k3-dsp: Fix return value check in k3_dsp_rproc_of_get_memories()

[ Upstream commit 6dfdf6e4e7096fead7755d47d91d72e896bb4804 ]

In case of error, the function devm_ioremap_wc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 6edbe024ba17 ("remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200905122503.17352-1-yuehaibing@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom: pas: fix error handling in adsp_pds_enable

[ Upstream commit c0a6e5ee1ecfe4c3a5799cfd30820748eff5dfab ]

If the pm_runtime_get_sync failed in adsp_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:

  1) pm_runtime_get_sync will increment pm usage counter even it
     failed. Forgetting to pm_runtime_put_noidle will result in
     reference leak.

  2) Have not reset pds[i] performance state.

Then we fix it.

Fixes: 17ee2fb4e8567 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143554.144707-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom: fix reference leak in adsp_start

[ Upstream commit aa37448f597c09844942da87d042fc6793f989c2 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in adsp_start, so we should fix it.

Fixes: dc160e4491222 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143534.144484-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: q6v5-mss: fix error handling in q6v5_pds_enable

[ Upstream commit a24723050037303e4008b37f1f8dcc99c58901aa ]

If the pm_runtime_get_sync failed in q6v5_pds_enable when
loop (i), The unroll_pd_votes will start from (i - 1), and
it will resulted in following problems:

  1) pm_runtime_get_sync will increment pm usage counter even it
     failed. Forgetting to pm_runtime_put_noidle will result in
     reference leak.

  2) Have not reset pds[i] performance state.

Then we fix it.

Fixes: 4760a896be88e ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102143433.143996-1-zhangqilong3@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc/mtk_scp: surround DT device IDs with CONFIG_OF

[ Upstream commit e59aef4edc45133ccb10b8e962cb74dcf1e3240b ]

Now that this driver can be compiled with COMPILE_TEST, we have no
guarantee that CONFIG_OF will also be defined. When that happens, a
warning about mtk_scp_of_match being defined but unused will be reported
so make sure this variable is only defined if of_match_ptr() actually
uses it.

Fixes: cbd2dca74926c0e4610c40923cc786b732c9e8ef remoteproc: scp: add COMPILE_TEST dependency
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Link: https://lore.kernel.org/r/20201102074007.299222-1-acourbot@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc/mediatek: change MT8192 CFG register base

[ Upstream commit 0a441514bc2b8a48ebe23c2dcb9feee6351d45b6 ]

The correct MT8192 CFG register base is 0x20000 off.  Changes the
registers accordingly.

Fixes: fd0b6c1ff85a ("remoteproc/mediatek: Add support for mt8192 SCP")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201210054109.587795-1-tzungbi@google.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/uverbs: Fix incorrect variable type

[ Upstream commit e0da68994d16b46384cce7b86eb645f1ef7c51ef ]

Fix incorrect type of max_entries in UVERBS_METHOD_QUERY_GID_TABLE -
max_entries is of type size_t although it can take negative values.

The following static check revealed it:

drivers/infiniband/core/uverbs_std_types_device.c:338 ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE() warn: 'max_entries' unsigned <= 0

Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/20201208073545.9723-4-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Do not indicate device ready when device enablement fails

[ Upstream commit 779e0bf47632c609c59f527f9711ecd3214dccb0 ]

In procedure ib_register_device, procedure kobject_uevent is called
(advertising that the device is ready for userspace usage) even when
device_enable_and_get() returned an error.

As a result, various RDMA modules attempted to register for the device
even while the device driver was preparing to unregister the device.

Fix this by advertising the device availability only after enabling the
device succeeds.

Fixes: e7a5b4aafd82 ("RDMA/device: Don't fire uevent before device is fully initialized")
Link: https://lore.kernel.org/r/20201208073545.9723-3-leon@kernel.org
Suggested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/hdmi: fix silent stream for first playback to DP

[ Upstream commit b1a5039759cb7bfcb2157f28604dbda0bca58598 ]

A problem exists in enabling silent stream when connection type is
DisplayPort. Silent stream programming is completed when a new DP
receiver is connected, but infoframe transmission does not actually
start until PCM is opened for the first time. This can result in audible
gap of multiple seconds. This only affects the first PCM open.

Fix the issue by properly assigning a converter to the silent stream,
and modifying the required stream ID programming sequence.

This change only affects Intel display audio codecs.

BugLink: https://github.com/thesofproject/linux/issues/2468
Fixes: 951894cf30f4 ("ALSA: hda/hdmi: Add Intel silent stream support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201210174445.3134104-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()

[ Upstream commit 428bb001143cf5bfb65aa4ae90d4ebc95f82d007 ]

platform_get_resource_byname() may fail and in this case a NULL
dereference will occur.

Fix it to use devm_platform_ioremap_resource_byname() instead of calling
platform_get_resource_byname() and devm_ioremap().

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t,
n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Fixes: ad7fcbc308b0 ("slimbus: qcom: Add Qualcomm Slimbus controller driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607392473-20610-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/sstep: Cover new VSX instructions under CONFIG_VSX

[ Upstream commit 1817de2f141c718f1a0ae59927ec003e9b144349 ]

Recently added Power10 prefixed VSX instruction are included
unconditionally in the kernel. If they are executed on a
machine without VSX support, it might create issues. Fix that.
Also fix one mnemonics spelling mistake in comment.

Fixes: 50b80a12e4cc ("powerpc sstep: Add support for prefixed load/stores")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201011050908.72173-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/sstep: Emulate prefixed instructions only when CPU_FTR_ARCH_31 is set

[ Upstream commit ef6879f8c8053cc3b493f400a06d452d7fb13650 ]

Unconditional emulation of prefixed instructions will allow
emulation of them on Power10 predecessors which might cause
issues. Restrict that.

Fixes: 3920742b92f5 ("powerpc sstep: Add support for prefixed fixed-point arithmetic")
Fixes: 50b80a12e4cc ("powerpc sstep: Add support for prefixed load/stores")
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201011050908.72173-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: m_can: m_can_config_endisable(): remove double clearing of clock stop request bit

[ Upstream commit c9f4cad6cdfe350ce2637e57f7f2aa7ff326bcc6 ]

The CSR bit is already cleared when arriving here so remove this section of
duplicate code.

The registers set in m_can_config_endisable() is set to same exact values as
before this patch.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Sriram Dash <sriram.dash@samsung.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191211063227.84259-1-sean@geanix.com
Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r8a779a0: Fix R and OSC clocks

[ Upstream commit 14653942de7f63e21ece32e3901f09a248598a43 ]

The R-Car V3U clock driver defines the R and OSC clocks using R-Car Gen3
clock types.  However, The R-Car V3U clock driver does not use the R-Car
Gen3 clock driver core, hence registering the R and OSC clocks fails:

    renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock osc: -22
    renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock r: -22

Fix this by introducing clock definition macros specific to R-Car V3U.
Note that rcar_r8a779a0_cpg_clk_register() already handled the related
clock types.  Drop the now unneeded include of rcar-gen3-cpg.h.

Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201109152614.2465483-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: avoid using generic_block_bmap

[ Upstream commit d8b3df8b1048405e73558b88cba2adf29490d468 ]

Surprisingly, `block' in sector_t indicates the number of
i_blkbits-sized blocks rather than sectors for bmap.

In addition, considering buffer_head limits mapped size to 32-bits,
should avoid using generic_block_bmap.

Link: https://lore.kernel.org/r/20201209115740.18802-1-huangjianan@oppo.com
Fixes: 9da681e017a3 ("staging: erofs: support bmap")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Guo Weichao <guoweichao@oppo.com>
[ Gao Xiang: slightly update the commit message description. ]
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: hook up missing RX handlers

[ Upstream commit 8a59d39033c35bb484f6bd91891db86ebe07fdc2 ]

The RX handlers for probe response data and channel switch weren't
hooked up properly, fix that.

Fixes: 86e177d80ff7 ("iwlwifi: mvm: add NOA and CSA to a probe response")
Fixes: d3a108a48dc6 ("iwlwifi: mvm: Support CSA countdown offloading")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2d07dcee0d35.I07a61b5d734478db57d9434ff303e4c90bf6c32b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: dbg-tlv: fix old length in is_trig_data_contained()

[ Upstream commit 58a1c9f9a9b6b9092ae10b84f6b571a06596e296 ]

There's a bug in the lengths - the 'old length' needs to be calculated
using the 'old' pointer, of course, likely a copy/paste mistake. Fix
this.

Reported-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: cf29c5b66b9f ("iwlwifi: dbg_ini: implement time point handling")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c0105ddffa74.I1ddb243053ff763c91b663748b6a593ecc3b5634@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: fix use-after-free in ccw_device_destroy_console

[ Upstream commit 14d4c4fa46eeaa3922e8e1c4aa727eb0a1412804 ]

Use of sch->dev reference after the put_device() call could trigger
the use-after-free bugs.

Fix this by simply adjusting the position of put_device.

Fixes: 37db8985b211 ("s390/cio: add basic protected virtualization support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
[vneethv@linux.ibm.com: Slight modification in the commit-message]
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsi: Aspeed: Add mutex to protect HW access

[ Upstream commit dfd7f2c1c532efaeff6084970bb60ec2f2e44191 ]

There is nothing to prevent multiple commands being executed
simultaneously. Add a mutex to prevent this.

Fixes: 606397d67f41 ("fsi: Add ast2600 master driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201120004929.185239-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: fsl-mc: fix error return code in fsl_mc_object_allocate()

[ Upstream commit 3d70fb03711c37bc64e8e9aea5830f498835f6bf ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 197f4d6a4a00 ("staging: fsl-mc: fsl-mc object allocator driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607068967-31991-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: fsl-mc: add back accidentally dropped error check

[ Upstream commit 61243c03dde238170001093a29716c2369e8358f ]

A previous patch accidentally dropped an error check, so add it back.

Fixes: aef85b56c3c1 ("bus: fsl-mc: MC control registers are not always available")
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20201105153050.19662-1-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: pci_endpoint_test: fix return value of error branch

[ Upstream commit 1749c90489f2afa6b59dbf3ab59d58a9014c84a1 ]

We return 'err' in the error branch, but this variable may be set as
zero before. Fix it by setting 'err' as a negative value before we
goto the error label.

Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/1605790158-6780-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_spi: Don't overwrite spi::mode

[ Upstream commit 74639cbf51d7c0304342544a83dfda354a6bd208 ]

There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.

Fixes: a17d94f0b6e1 ("mfd: Add ChromeOS EC SPI driver")
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix N2N and NVMe connect retry failure

[ Upstream commit 07a5f69248e3486e387c40af64793466371c7d91 ]

FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N
(Direct Attach) config, where the driver was stuck on FCP PRLI mode and
failed to retry with NVMe PRLI.

Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com
Fixes: 84ed362ac40c ("scsi: qla2xxx: Dual FCP-NVMe target port support”)
Fixes: 983f127603fa ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”)
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix FW initialization error on big endian machines

[ Upstream commit 8a78dd6ed1af06bfa7b4ade81328ff7ea11b6947 ]

Some fields are not correctly byte swapped causing failure during
initialization. As probe() returns failure, HBAs will not be claimed when
this happens.

qla2xxx [0007:01:00.0]-ffff:3: Secure Flash Update in FW: Supported
qla2xxx [0007:01:00.0]-ffff:3: SCM in FW: Supported
qla2xxx [0007:01:00.0]-00d2:3: Init Firmware **** FAILED ****.
qla2xxx [0007:01:00.0]-00d6:3: Failed to initialize adapter - Adapter flags 2.
qla2xxx 0007:01:00.1: enabling device (0140 -> 0142)
qla2xxx [0007:01:00.1]-011c: : MSI-X vector count: 128.
qla2xxx [0007:01:00.1]-001d: : Found an ISP2289 irq 18 iobase 0xd000080080004000.
qla2xxx 0007:01:00.1: Using 64-bit direct DMA at offset 800000000000000
BUG: Bad page state in process insmod  pfn:67118 page:f00000000168bd40
count:-1 mapcount:0 mapping: (null) index:0x0
page flags: 0x3ffff800000000() page dumped because: nonzero _count
Modules linked in: qla2xxx(OE+) nvme_fc nvme_fabrics
nvme_core scsi_transport_fc scsi_tgt nls_utf8 isofs ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set
nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle
ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle
iptable_security iptable_raw ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter nx_crypto ses enclosure scsi_transport_sas
pseries_rng sg ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif
crct10dif_generic crct10dif_common usb_storage ipr libata tg3 ptp
pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 32 PID: 8560 Comm: insmod Kdump: loaded Tainted: G
OE  ------------   3.10.0-957.el7.ppc64 #1
Call Trace:
[c0000006dd7caa70] [c00000000001cca8] .show_stack+0x88/0x330 (unreliable)
[c0000006dd7cab30] [c000000000ac3d88] .dump_stack+0x28/0x3c
[c0000006dd7caba0] [c00000000029e48c] .bad_page+0x15c/0x1c0
[c0000006dd7cac40] [c00000000029f938] .get_page_from_freelist+0x11e8/0x1ea0
[c0000006dd7caf40] [c0000000002a1d30] .__alloc_pages_nodemask+0x1c0/0xc70
[c0000006dd7cb140] [c00000000002ba0c] .__dma_direct_alloc_coherent+0x8c/0x170
[c0000006dd7cb1e0] [d000000010a94688] .qla2x00_mem_alloc+0x10f8/0x1370 [qla2xxx]
[c0000006dd7cb2d0] [d000000010a9c790] .qla2x00_probe_one+0xb60/0x22e0 [qla2xxx]
[c0000006dd7cb540] [c0000000005de764] .pci_device_probe+0x204/0x300
[c0000006dd7cb600] [c0000000006ca61c] .driver_probe_device+0x2cc/0x6f0
[c0000006dd7cb6b0] [c0000000006cabec] .__driver_attach+0x10c/0x110
[c0000006dd7cb740] [c0000000006c5f04] .bus_for_each_dev+0x94/0x100
[c0000006dd7cb7e0] [c0000000006c94f4] .driver_attach+0x34/0x50
[c0000006dd7cb860] [c0000000006c8f58] .bus_add_driver+0x298/0x3b0
[c0000006dd7cb900] [c0000000006cb6e0] .driver_register+0xb0/0x1a0
[c0000006dd7cb980] [c0000000005dc474] .__pci_register_driver+0xc4/0xf0
[c0000006dd7cba10] [d000000010b94e20] .qla2x00_module_init+0x2a8/0x328 [qla2xxx]
[c0000006dd7cbaa0] [c00000000000c130] .do_one_initcall+0x130/0x2e0
[c0000006dd7cbb50] [c0000000001b2e8c] .load_module+0x1afc/0x2340
[c0000006dd7cbd40] [c0000000001b3920] .SyS_finit_module+0xd0/0x130
[c0000006dd7cbe30] [c00000000000a284]  system_call+0x38/0xfc

Link: https://lore.kernel.org/r/20201202132312.19966-9-njavali@marvell.com
Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Fixes: cf3c54fb49a4 ("scsi: qla2xxx: Add SLER and PI control support”)
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/kprobes: Restore BTF if the single-stepping is cancelled

[ Upstream commit 78ff2733ff352175eb7f4418a34654346e1b6cd2 ]

Fix to restore BTF if single-stepping causes a page fault and
it is cancelled.

Usually the BTF flag was restored when the single stepping is done
(in resume_execution()). However, if a page fault happens on the
single stepping instruction, the fault handler is invoked and
the single stepping is cancelled. Thus, the BTF flag is not
restored.

Fixes: 1ecc798c6764 ("x86: debugctlmsr kprobes")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/160389546985.106936.12727996109376240993.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs_common: need lock during iterate through the list

[ Upstream commit 4a9d81caf841cd2c0ae36abec9c2963bf21d0284 ]

If the elem is deleted during be iterated on it, the iteration
process will fall into an endless loop.

kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137]

PID: 17137  TASK: ffff8818d93c0000  CPU: 4   COMMAND: "nfsd"
    [exception RIP: __state_in_grace+76]
    RIP: ffffffffc00e817c  RSP: ffff8818d3aefc98  RFLAGS: 00000246
    RAX: ffff881dc0c38298  RBX: ffffffff81b03580  RCX: ffff881dc02c9f50
    RDX: ffff881e3fce8500  RSI: 0000000000000001  RDI: ffffffff81b03580
    RBP: ffff8818d3aefca0   R8: 0000000000000020   R9: ffff8818d3aefd40
    R10: ffff88017fc03800  R11: ffff8818e83933c0  R12: ffff8818d3aefd40
    R13: 0000000000000000  R14: ffff8818e8391068  R15: ffff8818fa6e4000
    CS: 0010  SS: 0018
 #0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace]
 #1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd]
 #2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd]
 #3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd]
 #4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd]
 #5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc]
 #6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc]
 #7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd]
 #8 [ffff8818d3aefec8] kthread at ffffffff810b88c1
 #9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607

The troublemake elem:
crash> lock_manager ffff881dc0c38298
struct lock_manager {
  list = {
    next = 0xffff881dc0c38298,
    prev = 0xffff881dc0c38298
  },
  block_opens = false
}

Fixes: c87fb4a378f9 ("lockd: NLM grace period shouldn't block NFSv4 opens")
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Fix 5 seconds delay when doing inter server copy

[ Upstream commit ca9364dde50daba93eff711b4b945fd08beafcc2 ]

Since commit b4868b44c5628 ("NFSv4: Wait for stateid updates after
CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5
seconds delay regardless of the size of the copy. The delay is from
nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential
fails because the seqid in both nfs4_state and nfs4_stateid are 0.

Fix by modifying nfs4_init_cp_state to return the stateid with seqid 1
instead of 0. This is also to conform with section 4.8 of RFC 7862.

Here is the relevant paragraph from section 4.8 of RFC 7862:

   A copy offload stateid's seqid MUST NOT be zero.  In the context of a
   copy offload operation, it is inappropriate to indicate "the most
   recent copy offload operation" using a stateid with a seqid of zero
   (see Section 8.2.2 of [RFC5661]).  It is inappropriate because the
   stateid refers to internal state in the server and there may be
   several asynchronous COPY operations being performed in parallel on
   the same file by the server.  Therefore, a copy offload stateid with
   a seqid of zero MUST be considered invalid.

Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Fix message level for normal termination

[ Upstream commit 4420440c57892779f265108f46f83832a88ca795 ]

The warning message from nfsd terminating normally
can confuse system adminstrators or monitoring software.

Though it's not exactly fair to pin-point a commit where it
originated, the current form in the current place started
to appear in:

Fixes: e096bbc6488d ("knfsd: remove special handling for SIGHUP")
Signed-off-by: kazuo ito <kzpn200@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

speakup: fix uninitialized flush_lock

[ Upstream commit d1b928ee1cfa965a3327bbaa59bfa005d97fa0fe ]

The flush_lock is uninitialized, use DEFINE_SPINLOCK
to define and initialize flush_lock.

Fixes: c6e3fd22cd53 ("Staging: add speakup to the staging directory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20201117012229.3395186-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: oxu210hp-hcd: Fix memory leak in oxu_create

[ Upstream commit e5548b05631ec3e6bfdaef1cad28c799545b791b ]

usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when adding fails to prevent
memory leak.

Fixes: b92a78e582b1a ("usb host: Oxford OXU210HP HCD driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123145809.1456541-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe

[ Upstream commit d6ff32478d7e95d6ca199b5c852710d6964d5811 ]

The pm_runtime_enable will decrement the power disable depth. Imbalance
depth will resulted in enabling runtime PM of device fails later.  Thus
a pairing decrement must be needed on the error handling path to keep it
balanced.

Fixes: 6c984b066d84b ("ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123145719.1455849-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm: sanity_check_fault() should work for all, not only BOOK3S

[ Upstream commit 7ceb40027e19567a0a066e3b380cc034cdd9a124 ]

The verification and message introduced by commit 374f3f5979f9
("powerpc/mm/hash: Handle user access of kernel address gracefully")
applies to all platforms, it should not be limited to BOOK3S.

Make the BOOK3S version of sanity_check_fault() the one for all,
and bail out earlier if not BOOK3S.

Fixes: 374f3f5979f9 ("powerpc/mm/hash: Handle user access of kernel address gracefully")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fe199d5af3578d3bf80035d203a94d742a7a28af.1607491748.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: max98390: Fix error codes in max98390_dsm_init()

[ Upstream commit 3cea33b6f2d7782d1be17c71509986f33ee93541 ]

These error paths return success but they should return -EINVAL.

Fixes: 97ed3e509ee6 ("ASoC: max98390: Fix potential crash during param fw loading")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: remove broken __exit annotations

[ Upstream commit 45fe7befe0db5e61cd3c846315f0ac48541e8445 ]

Functions that are annotated __exit are discarded for built-in drivers,
but the .remove callback in a device driver must still be kept around
to allow bind/unbind operations.

There is now a linker warning for the discarded symbol references:

`tmc_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tmc-core.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tmc-core.o
`tpiu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpiu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpiu.o
`etb_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-etb10.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-etb10.o
`static_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`dynamic_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`static_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`dynamic_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`catu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-catu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-catu.o

Remove all those annotations.

Fixes: 8b0cf82677d1 ("coresight: stm: Allow to build coresight-stm as a module")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: change clk_get() to devm_clk_get() and add missed checks

[ Upstream commit 95d3befbc5e1ee39fc8a78713924cf7ed2b3cabe ]

cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.

Fixes: bb24a31ed584 ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: avoid dereferencing a null hdmi_phy on an error message

[ Upstream commit b097efba9580d1f7cbc80cda84e768983e3de541 ]

Currently there is a null pointer check for hdmi_phy that implies it
may be null, however a dev_err messages dereferences this potential null
pointer.  Avoid a null pointer dereference by only emitting the dev_err
message if hdmi_phy is non-null.  It is a moot point if the error message
needs to be printed at all, but since this is a relatively new piece of
code it may be useful to keep the message in for the moment in case there
are unforseen errors that need to be reported.

Fixes: be28b6507c46 ("drm/mediatek: separate hdmi phy to different file")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference after null check")
Link: https://lore.kernel.org/r/20201207150937.170435-1-colin.king@canonical.com
[vkoul: fix indent of return call]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powermac: Fix low_sleep_handler with CONFIG_VMAP_STACK

[ Upstream commit db972a3787d12b1ce9ba7a31ec376d8a79e04c47 ]

low_sleep_handler() can't restore the context from standard
stack because the stack can hardly be accessed with MMU OFF.

Store everything in a global storage area instead of storing
a pointer to the stack in that global storage area.

To avoid a complete churn of the function, still use r1 as
the pointer to the storage area during restore.

Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Reported-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e3e0d8042a3ba75cb4a9546c19c408b5b5b28994.1607404931.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/hibernation: remove redundant cacheinfo update

[ Upstream commit b866459489fe8ef0e92cde3cbd6bbb1af6c4e99b ]

Partitions with cache nodes in the device tree can encounter the
following warning on resume:

CPU 0 already accounted in PowerPC,POWER9@0(Data)
WARNING: CPU: 0 PID: 3177 at arch/powerpc/kernel/cacheinfo.c:197 cacheinfo_cpu_online+0x640/0x820

These calls to cacheinfo_cpu_offline/online have been redundant since
commit e610a466d16a ("powerpc/pseries/mobility: rebuild cacheinfo
hierarchy post-migration").

Fixes: e610a466d16a ("powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-25-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/hibernation: drop pseries_suspend_begin() from suspend ops

[ Upstream commit 52719fce3f4c7a8ac9eaa191e8d75a697f9fbcbc ]

There are three ways pseries_suspend_begin() can be reached:

1. When "mem" is written to /sys/power/state:

kobj_attr_store()
-> state_store()
  -> pm_suspend()
    -> suspend_devices_and_enter()
      -> pseries_suspend_begin()

This never works because there is no way to supply a valid stream id
using this interface, and H_VASI_STATE is called with a stream id of
zero. So this call path is useless at best.

2. When a stream id is written to /sys/devices/system/power/hibernate.
pseries_suspend_begin() is polled directly from store_hibernate()
until the stream is in the "Suspending" state (i.e. the platform is
ready for the OS to suspend execution):

dev_attr_store()
-> store_hibernate()
  -> pseries_suspend_begin()

3. When a stream id is written to /sys/devices/system/power/hibernate
(continued). After #2, pseries_suspend_begin() is called once again
from the pm core:

dev_attr_store()
-> store_hibernate()
  -> pm_suspend()
    -> suspend_devices_and_enter()
      -> pseries_suspend_begin()

This is redundant because the VASI suspend state is already known to
be Suspending.

The begin() callback of platform_suspend_ops is optional, so we can
simply remove that assignment with no loss of function.

Fixes: 32d8ad4e621d ("powerpc/pseries: Partition hibernation support")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-18-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode

[ Upstream commit f77ac2e378be9dd61eb88728f0840642f045d9d1 ]

There are a couple of problems with the exception entry code that deals
with FP exceptions (which are reported as UND exceptions) when building
the kernel in Thumb2 mode:
- the conditional branch to vfp_kmode_exception in vfp_support_entry()
  may be out of range for its target, depending on how the linker decides
  to arrange the sections;
- when the UND exception is taken in kernel mode, the emulation handling
  logic is entered via the 'call_fpe' label, which means we end up using
  the wrong value/mask pairs to match and detect the NEON opcodes.

Since UND exceptions in kernel mode are unlikely to occur on a hot path
(as opposed to the user mode version which is invoked for VFP support
code and lazy restore), we can use the existing undef hook machinery for
any kernel mode instruction emulation that is needed, including calling
the existing vfp_kmode_exception() routine for unexpected cases. So drop
the call to call_fpe, and instead, install an undef hook that will get
called for NEON and VFP instructions that trigger an UND exception in
kernel mode.

While at it, make sure that the PC correction is accurate for the
execution mode where the exception was taken, by checking the PSR
Thumb bit.

Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Fixes: eff8728fe698 ("vmlinux.lds.h: Add PGO and AutoFDO input sections")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system

[ Upstream commit cf791774a16caf87b0e4c0c55b82979bad0b6c01 ]

Fix array names to match assignments for data items and data items
counter in 'mlxplat_mlxcpld_comex_items' structure for:
.data = mlxplat_mlxcpld_default_pwr_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
and
.data = mlxplat_mlxcpld_default_fan_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_fan),

Replace:
- 'mlxplat_mlxcpld_pwr' by 'mlxplat_mlxcpld_default_pwr_items_data' for
   ARRAY_SIZE() calculation.
- 'mlxplat_mlxcpld_fan' by 'mlxplat_mlxcpld_default_fan_items_data'
   for ARRAY_SIZE() calculation.

Fixes: bdd6e155e0d6 ("platform/x86: mlx-platform: Add support for new system type")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201207174745.22889-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems

[ Upstream commit ba4939f1dd46dde08c2f9b9d7ac86ed3ea7ead86 ]

Fix array names to match assignments for data items and data items
counter in 'mlxplat_mlxcpld_default_items' structure for:
.data = mlxplat_mlxcpld_default_pwr_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
and
.data = mlxplat_mlxcpld_default_fan_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_fan),

Replace:
- 'mlxplat_mlxcpld_pwr' by 'mlxplat_mlxcpld_default_pwr_items_data' for
   ARRAY_SIZE() calculation.
- 'mlxplat_mlxcpld_fan' by 'mlxplat_mlxcpld_default_fan_items_data'
   for ARRAY_SIZE() calculation.

Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201207174745.22889-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fnic: Fix error return code in fnic_probe()

[ Upstream commit d4fc94fe65578738ded138e9fce043db6bfc3241 ]

Return a negative error code from the error handling case instead of 0 as
done elsewhere in this function.

Link: https://lore.kernel.org/r/1607068060-31203-1-git-send-email-zhangchangzhong@huawei.com
Fixes: 5df6d737dd4b ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

seq_buf: Avoid type mismatch for seq_buf_init

[ Upstream commit d9a9280a0d0ae51dc1d4142138b99242b7ec8ac6 ]

Building with W=2 prints a number of warnings for one function that
has a pointer type mismatch:

linux/seq_buf.h: In function 'seq_buf_init':
linux/seq_buf.h:35:12: warning: pointer targets in assignment from 'unsigned char *' to 'char *' differ in signedness [-Wpointer-sign]

Change the type in the function prototype according to the type in
the structure.

Link: https://lkml.kernel.org/r/20201026161108.3707783-1-arnd@kernel.org
Fixes: 9a7777935c34 ("tracing: Convert seq_buf fields to be like seq_file fields")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Fix inappropriate use of put_device()

[ Upstream commit 6dc1c7ab6f047f45b62986ffebc5324e86ed5f5a ]

kfree(conn) is called inside put_device(&conn->dev) which could lead to
use-after-free. In addition, device_unregister() should be used here rather
than put_deviceO().

Link: https://lore.kernel.org/r/20201120074852.31658-1-miaoqinglang@huawei.com
Fixes: f3c893e3dbb5 ("scsi: iscsi: Fail session and connection on transport registration failure")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix error return in pm8001_pci_probe()

[ Upstream commit 97031ccffa4f62728602bfea8439dd045cd3aeb2 ]

The driver did not return an error in the case where
pm8001_configure_phy_settings() failed.

Use rc to store the return value of pm8001_configure_phy_settings().

Link: https://lore.kernel.org/r/20201205115551.2079471-1-zhangqilong3@huawei.com
Fixes: 279094079a44 ("[SCSI] pm80xx: Phy settings support for motherboard controller.")
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Fix missing destroy_workqueue() on error in __qedi_probe

[ Upstream commit 62eebd5247c4e4ce08826ad5995cf4dd7ce919dd ]

Add the missing destroy_workqueue() before return from __qedi_probe in the
error handling case when fails to create workqueue qedi->offload_thread.

Link: https://lore.kernel.org/r/20201109091518.55941-1-miaoqinglang@huawei.com
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fsl-sai: fix memory leak

[ Upstream commit e81bed419f032824e7ddf8b5630153be6637e480 ]

If the device is removed we don't unregister the composite clock. Fix
that.

Fixes: 9cd10205227c ("clk: fsl-sai: new driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20201105192746.19564-2-michael@walle.cc
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements

[ Upstream commit 9e454e37dc7c0ee9e108d70b983e7a71332aedff ]

According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
egisters. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.

Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/46298e66572784c44f873f1b71cc4ab3d8fc5aa6.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements

[ Upstream commit 3d07c3b3a886fefd583c1b485b5e4e3c4e2da493 ]

According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.

Fixes: ed5e8f689154 ("arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/12506964ca5d5f936579a280ad0a7e7f9a0a2d4c.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: meson: fix PHY deassert timing requirements

[ Upstream commit 656ab1bdcd2b755dc161a9774201100d5bf74b8d ]

According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.

Fixes: a2c6e82e5341 ("ARM: dts: meson: switch to the generic Ethernet PHY reset bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # on Odroid-C1+
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/ff78772b306411e145769c46d4090554344db41e.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: fix PHY deassert timing requirements

[ Upstream commit c183c406c4321002fe85b345b51bc1a3a04b6d33 ]

According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue seen on ODROID-C2 where the Ethernet
link doesn't come up when using ip link set down/up:
  [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down
  [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
  [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
  [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
  [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed

Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements

[ Upstream commit 1c7412530d5d0e0a0b27f1642f5c13c8b9f36f05 ]

According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue where the Ethernet link doesn't come up
when using ip link set down/up:
  [   29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
  [   34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
  [   34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
  [   34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
  [   34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed

Fixes: 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/df3f5c4fc6e43c55429fd3662a636036a21eed49.1607363522.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: atmel: fix unlock_all() for AT25FS010/040

[ Upstream commit 8c174d1511d235ed6c049dcb2b704777ad0df7a5 ]

These flashes have some weird BP bits mapping which aren't supported in
the current locking code. Just add a simple unlock op to unprotect the
entire flash array which is needed for legacy behavior.

Fixes: 3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-7-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: atmel: remove global protection flag

[ Upstream commit e6204d4620276398ed7317d64c369813a1f96615 ]

This is considered bad for the following reasons:
 (1) We only support the block protection with BPn bits for write
     protection. Not all Atmel parts support this.
 (2) Newly added flash chip will automatically inherit the "has
     locking" support and thus needs to explicitly tested. Better
     be opt-in instead of opt-out.
 (3) There are already supported flashes which doesn't support
     the locking scheme. So I assume this wasn't properly tested
     before adding that chip; which enforces my previous argument
     that locking support should be an opt-in.

Remove the global flag and add individual flags to all flashes which
supports BP locking. In particular the following flashes don't support
the BP scheme:
 - AT26F004
 - AT25SL321
 - AT45DB081D

Please note, that some flashes which are marked as SPI_NOR_HAS_LOCK just
support Global Protection, i.e. not our supported block protection
locking scheme. This is to keep backwards compatibility with the
current "unlock all at boot" mechanism. In particular the following
flashes doesn't have BP bits:
 - AT25DF041A
 - AT25DF321
 - AT25DF321A
 - AT25DF641
 - AT26DF081A
 - AT26DF161A
 - AT26DF321

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-4-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: ignore errors in spi_nor_unlock_all()

[ Upstream commit bdb1a75e4b9df6861ec6a6e3e3997820d3cebabe ]

Just try to unlock the whole SPI-NOR flash array. Don't abort the
probing in case of an error. Justifications:
 (1) For some boards, this just works because
     spi_nor_write_16bit_sr_and_check() is broken and just checks the
     second half of the 16bit. Once that will be fixed, SPI probe will
     fail for boards which has hardware-write protected SPI-NOR flashes.
 (2) Until now, hardware write-protection was the only viable solution
     to use the block protection bits. This is because this very
     function spi_nor_unlock_all() will be called unconditionally on
     every linux boot. Therefore, this bits only makes sense in
     combination with the hardware write-protection. If we would fail
     the SPI probe on an error in spi_nor_unlock_all() we'd break
     virtually all users of the block protection bits.
 (3) We should try hard to keep the MTD working even if the flash might
     not be writable/erasable.

Fixes: 3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-3-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: sst: fix BPn bits for the SST25VF064C

[ Upstream commit 989d4b72bae3b05c1564d38e71e18f65b12734fb ]

This flash part actually has 4 block protection bits.

Please note, that this patch is just based on information of the
datasheet of the datasheet and wasn't tested.

Fixes: 3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Reported-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201203162959.29589-2-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

adm8211: fix error return code in adm8211_probe()

[ Upstream commit 05c2a61d69ea306e891884a86486e1ef37c4b78d ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: cc0b88cf5ecf ("[PATCH] Add adm8211 802.11b wireless driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607071638-33619-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models

[ Upstream commit a4327979a19e8734ddefbd8bcbb73bd9905b69cd ]

Some HP x360 models have an ACPI VGBS method which sets bit 4 instead of
bit 6 when NOT in tablet mode at boot. Inspecting all the DSDTs in my DSDT
collection shows only one other model, the Medion E1239T ever setting bit 4
and it always sets this together with bit 6.

So lets treat bit 4 as a second bit which when set indicates the device not
being in tablet-mode, as we already do for bit 6.

While at it also prefix all VGBS constant defines with "VGBS_".

Note this wrokaround was first added to the kernel as
commit d823346876a9 ("platform/x86: intel-vbtn: Fix SW_TABLET_MODE always
reporting 1 on the HP Pavilion 11 x360").
After commit 8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an
allow-list for SW_TABLET_MODE reporting") got added to the kernel this
was reverted, because with the new allow-list approach the workaround
was no longer necessary for the model on which the issue was first
reported.

But it turns out that the workaround is still necessary because some
affected models report a chassis-type of 31 which is on the allow-list.

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894017
Fixes: 21d64817c724 ("platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360"")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134

[ Upstream commit d74e0ae7e03032b47b8631cc1e52a7ae1ce988c0 ]

Commit cde1a8a99287 ("Bluetooth: btusb: Fix and detect most of the
Chinese Bluetooth controllers") made the detection of fake controllers
more generic fixing it for much of the newer fakes / clones.

But this does not work for a fake CSR controller with a bcdDevice
value of 0x0134, which was correctly identified as fake before
this change.

Add an extra check for this special case, checking for a combination
of a bcdDevice value of 0x0134, together with a lmp_subver of 0x0c5c
and a hci_ver of BLUETOOTH_VER_2_0.

The chip inside this fake dongle is marked as with "clockwise cw6629d".

Fixes: cde1a8a99287 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/rnbd: fix a null pointer dereference on dev->blk_symlink_name

[ Upstream commit 733c15bd3a944b8eeaacdddf061759b6a83dd3f4 ]

Currently in the case where dev->blk_symlink_name fails to be allocates
the error return path attempts to set an end-of-string character to
the unallocated dev->blk_symlink_name causing a null pointer dereference
error. Fix this by returning with an explicity ENOMEM error (which also
is missing in the original code as was not initialized).

Fixes: 1eb54f8f5dd8 ("block/rnbd: client: sysfs interface functions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference after null check")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name

[ Upstream commit 64e8a6ece1a5b1fa21316918053d068baeac84af ]

For every rnbd_clt_dev, we alloc the pathname and blk_symlink_name
statically to NAME_MAX which is 255 bytes. In most of the cases we only
need less than 10 bytes, so 500 bytes per block device are wasted.

This commit dynamically allocates memory buffer for pathname and
blk_symlink_name.

Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: sco: Fix crash when using BT_SNDMTU/BT_RCVMTU option

[ Upstream commit f6b8c6b5543983e9de29dc14716bfa4eb3f157c4 ]

This commit add the invalid check for connected socket, without it will
causes the following crash due to sco_pi(sk)->conn being NULL:

KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
CPU: 3 PID: 4284 Comm: test_sco Not tainted 5.10.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:sco_sock_getsockopt+0x45d/0x8e0
Code: 48 c1 ea 03 80 3c 02 00 0f 85 ca 03 00 00 49 8b 9d f8 04 00 00 48 b8 00
      00 00 00 00 fc ff df 48 8d 7b 50 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84
      c0 74 08 3c 03 0f 8e b5 03 00 00 8b 43 50 48 8b 0c
RSP: 0018:ffff88801bb17d88 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83a4ecdf
RDX: 000000000000000a RSI: ffffc90002fce000 RDI: 0000000000000050
RBP: 1ffff11003762fb4 R08: 0000000000000001 R09: ffff88810e1008c0
R10: ffffffffbd695dcf R11: fffffbfff7ad2bb9 R12: 0000000000000000
R13: ffff888018ff1000 R14: dffffc0000000000 R15: 000000000000000d
FS:  00007fb4f76c1700(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555e3b7a938 CR3: 00000001117be001 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 ? sco_skb_put_cmsg+0x80/0x80
 ? sco_skb_put_cmsg+0x80/0x80
 __sys_getsockopt+0x12a/0x220
 ? __ia32_sys_setsockopt+0x150/0x150
 ? syscall_enter_from_user_mode+0x18/0x50
 ? rcu_read_lock_bh_held+0xb0/0xb0
 __x64_sys_getsockopt+0xba/0x150
 ? syscall_enter_from_user_mode+0x1d/0x50
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 0fc1a726f897 ("Bluetooth: sco: new getsockopt options BT_SNDMTU/BT_RCVMTU")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btmtksdio: Add the missed release_firmware() in mtk_setup_firmware()

[ Upstream commit b73b5781a85c03113476f62346c390f0277baa4b ]

mtk_setup_firmware() misses to call release_firmware() in an error
path. Jump to free_fw to fix it.

Fixes: 737cd06072a7 ("Bluetooth: btmtksdio: fix up firmware download sequence")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add the missed release_firmware() in btusb_mtk_setup_firmware()

[ Upstream commit d1e9d232e1e60fa63df1b836ec3ecba5abd3fa9d ]

btusb_mtk_setup_firmware() misses to call release_firmware() in an error
path. Jump to err_release_fw to fix it.

Fixes: f645125711c8 ("Bluetooth: btusb: fix up firmware download sequence")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Fix error return code in dw_spi_bt1_probe()

[ Upstream commit e748edd9841306908b4e02dddd0afd1aa1f8b973 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/1607071357-33378-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: greybus: audio: Fix possible leak free widgets in gbaudio_dapm_free_controls

[ Upstream commit e77b259f67ab99f1e22ce895b9b1c637fd5f2d4c ]

In gbaudio_dapm_free_controls(), if one of the widgets is not found, an error
will be returned directly, which will cause the rest to be unable to be freed,
resulting in leak.

This patch fixes the bug. If if one of them is not found, just skip and free the others.

Fixes: 510e340efe0c ("staging: greybus: audio: Add helper APIs for dynamic audio module")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201205103827.31244-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: bcm2835: fix vchiq_mmal dependencies

[ Upstream commit 6c91799f59ed491a2b5bf5ef7c6d60306cda4e09 ]

When the MMAL code is built-in but the vchiq core config is
set to =m, the mmal code never gets built, which in turn can
lead to link errors:

ERROR: modpost: "vchiq_mmal_port_set_format" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_disable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_parameter_set" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_finalise" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_connect_tunnel" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_enable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_finalise" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_init" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_component_disable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "mmal_vchi_buffer_init" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_enable" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_version" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_submit_buffer" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_init" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "mmal_vchi_buffer_cleanup" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!
ERROR: modpost: "vchiq_mmal_port_parameter_get" [drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko] undefined!

Change the Kconfig to depend on BCM2835_VCHIQ like the other drivers,
and remove the now redundant dependencies.

Fixes: b18ee53ad297 ("staging: bcm2835: Break MMAL support out from camera")
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203223836.1362313-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh/adb-iop: Send correct poll command

[ Upstream commit 10199e90ee20e68859f8128331ec8d85b036d349 ]

The behaviour of the IOP firmware is not well documented but we do know
that IOP message reply data can be used to issue new ADB commands.
Use the message reply to better control autopoll behaviour by sending
a Talk Register 0 command after every ADB response, not unlike the
algorithm in the via-macii driver. This poll command is addressed to
that device which last received a Talk command (explicit or otherwise).

Cc: Joshua Thompson <funaho@jurai.org>
Fixes: 32226e817043 ("macintosh/adb-iop: Implement idle -> sending state transition")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/58bba4310da4c29b068345a4b36af8a531397ff7.1605847196.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh/adb-iop: Always wait for reply message from IOP

[ Upstream commit 2c9cfbadfa234b03473f1ef54e6f4772cc07a371 ]

A recent patch incorrectly altered the adb-iop state machine behaviour
and introduced a regression that can appear intermittently as a
malfunctioning ADB input device. This seems to be caused when reply
packets from different ADB commands become mixed up, especially during
the adb bus scan. Fix this by unconditionally entering the awaiting_reply
state after sending an explicit command, even when the ADB command won't
generate a reply from the ADB device.

It turns out that the IOP always generates reply messages, even when the
ADB command does not produce a reply packet (e.g. ADB Listen command).
So it's not really the ADB reply packets that are being mixed up, it's the
IOP messages that enclose them. The bug goes like this:

  1. CPU sends a message to the IOP, expecting no response because this
     message contains an ADB Listen command. The ADB command is now
     considered complete.

  2. CPU sends a second message to the IOP, this time expecting a
     response because this message contains an ADB Talk command. This
     ADB command needs a reply before it can be completed.

  3. adb-iop driver receives an IOP message and assumes that it relates
     to the Talk command. It's actually an empty one (with flags ==
     ADB_IOP_EXPLICIT|ADB_IOP_TIMEOUT) for the previous command. The
     Talk command is now considered complete but it gets the wrong reply
     data.

  4. adb-iop driver gets another IOP response message, which contains
     the actual reply data for the Talk command, but this is dropped
     (the driver is no longer in awaiting_reply state).

Cc: Joshua Thompson <funaho@jurai.org>
Fixes: e2954e5f727f ("macintosh/adb-iop: Implement sending -> idle state transition")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/0f0a25855391e7eaa53a50f651aea0124e8525dd.1605847196.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: imx: fix NVMEM_IMX_OCOTP dependency

[ Upstream commit fc928b901dc68481ba3e524860a641fe13e25dfe ]

A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:

WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
  Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
  Selected by [y]:
  - ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]

Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.

Fixes: 2782ef34ed23 ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: vexpress-spc: Add missing MODULE_ALIAS

[ Upstream commit d15183991c2d53d7cecf27a1555c91b702cef1ea ]

This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 47ac9aa165540 ("cpufreq: arm_big_little: add vexpress SPC interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>