drm/vc4: Correct interrupt masking bit assignment for HVS5

HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

drm/vc4: SCALER_DISPBKGND_AUTOHS is only valid on HVS4

The bit used for SCALER_DISPBKGND_AUTOHS in SCALER_DISPBKGNDX
has been repurposed on HVS5 to configure whether a display can
win back-to-back arbitration wins for the COB.

This is not desirable, therefore only select this bit on HVS4,
and explicitly clear it on HVS5.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

drm/vc4: Set AXI panic modes for the HVS

The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.

With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

drm/vc4: Configure the HVS COB allocations

The HVS Composite Output Buffer (COB) is the memory used to
generate the output pixel data.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.

In testing triple screen support it has been noted that only
1 line was being assigned to HVS channel 2. Whilst that is fine
for the transposer (TXP), and indeed needed as only some pixels
have an alpha channel, it is insufficient to run a live display.

Split the COB more evenly between the 3 HVS channels.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Revert vc4_regs change

hwmon: (lm75) Add Atmel AT30TS74 support

commit c851b715d38de0c262a63de16ad954ed39b47aca upstream.

Atmel (now Microchip) AT30TS74 is an LM75 compatible sensor. Add it.

Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/9494dfbc-f506-3e94-501d-6760c487c93d@axentia.se
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

overlays: Add a pull (up/down) parameter to pps-gpio

Square wave output from RTCs such as the DS3231 requires a pullup
resistor. This commit allows the pin's internal pull resistors to be
used by specifying "pull=up" or "pull=down" as necessary.

configs: Add LAN7430 driver on BCM2711

See: https://github.com/raspberrypi/linux/issues/4117

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

media: i2c: arducam-pivariety: Add custom controls

Add support for strobe_shift, strobe_width and mode custom controls.

Signed-off-by: Lee Jackson <info@arducam.com>

defconfigs: Add CONFIG_MUX_GPIO.

This config was missed from
06ccedb39414 ("defconfigs: Add VIDEO_MUX to all defconfigs")
so we had the mux framework, but not the control of GPIOs.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Revert "usbnet: smsc95xx: Don't clear read-only PHY interrupt"

This reverts commit 04887243887630f2478a330730d13d87a079b6c8.

See: https://github.com/raspberrypi/linux/issues/5145

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Revert "usbnet: smsc95xx: Avoid link settings race on interrupt reception"

This reverts commit 09201006dac9bf11a8e6755a11c74d5bccd54e7c.

See: https://github.com/raspberrypi/linux/issues/5145

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Revert "usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"

This reverts commit eaf3a094d8924ecb0baacf6df62ae1c6a96083cf.

See: https://github.com/raspberrypi/linux/issues/5145

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Revert "usbnet: smsc95xx: Fix deadlock on runtime resume"

This reverts commit b574d1e3e9a2432b5acd9c4a9dc8d70b6a37aaf1.

See: https://github.com/raspberrypi/linux/issues/5145

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

drm/vc4: Add async update support for cursor planes

Now that cursors are implemented as regular planes, all cursor
movements result in atomic updates. As the firmware-kms driver
doesn't support asynchronous updates, these are synchronous, which
limits the update rate to the screen refresh rate. Xorg seems unaware
of this (or at least of the effect of this), because if the mouse is
configured with a higher update rate than the screen then continuous
mouse movement results in an increasing backlog of mouse events -
cue extreme lag.

Add minimal support for asynchronous updates - limited to cursor
planes - to eliminate the lag.

See: https://github.com/raspberrypi/linux/pull/4971
     https://github.com/raspberrypi/linux/issues/4988

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

 rpi-simple-soundcard: limits sample rate of Merus Amp board

Adding a dedicated hw_params function to limit the maximum sample
rate of the IFX/Merus board to 48000ksps.

Thanks to Ariel Muszkat for the support.

Signed-off-by: Joerg Schambacher <joerg@hifiberry.com>

mmc: block: Don't do single-sector reads during recovery

See https://github.com/raspberrypi/linux/issues/5019

If an SD card has degraded performance such that IO operations time out
then the MMC block layer will leak SG DMA mappings in the swiotlb during
recovery. It retries the same SG and this causes the leak, as it is
mapped twice - once in sdhci_pre_req() and again during single-block
reads in sdhci_prepare_data().

Resetting the card (including power-cycling if a regulator for vmmc is
present) ought to be enough to recover a stuck state, so for now don't
try single-block reads in the recovery path.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>

net: phy: lan87xx: Decrease phy polling rate

Polling at 100Hz for 1.5s consumes quite a bit of kworker time with no
obvious benefit. Reduce that polling rate to ~6Hz.

To further save CPU and power, defer the next poll if no energy is
detected.

See: https://github.com/raspberrypi/linux/issues/4780

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Merge tag 'v5.15.61' into rpi-5.15.y

This is the 5.15.61 stable release

Revert "net: phy: lan87xx: Decrease phy polling rate"

This reverts commit 0792bca64303bfd73f98e9fd00eb5bc1ed6d2b75.

Revert "mmc: block: Don't do single-sector reads during recovery"

This reverts commit dff79e31c3b05a50f725442c1fc19a6194491523.

Merge tag 'v5.15.60' into rpi-5.15.y

This is the 5.15.60 stable release

Merge tag 'v5.15.59' into rpi-5.15.y

This is the 5.15.59 stable release

Merge tag 'v5.15.58' into rpi-5.15.y

This is the 5.15.58 stable release

Merge tag 'v5.15.57' into rpi-5.15.y

This is the 5.15.57 stable release

overlays: merus-amp: Set GPIO 8 as input np

Set GPIO 8 as input np for proper msel configuration at boot up.

configs: Enable DACBERRY400

Signed-off-by: Ashish Vara <ashishhvara@gmail.com>

overlays: Add dacberry400

Added overlay file for dacberry400 audio card.

Signed-off-by: Ashish Vara <ashishhvara@gmail.com>

sound: soc: bcm: Added Sound card driver for Dacberry400 Audio card for Raspberry Pi 400

Added Sound card driver for DACberry400 Audio card.

Signed-off-by: Ashish Vara <ashishhvara@gmail.com>

overlays: gpio-fan: Document the hyst parameter

See: https://forums.raspberrypi.com/viewtopic.php?t=339143

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

overlays: gpio-fan: Add hyst (hysteresis) param

See: https://forums.raspberrypi.com/viewtopic.php?t=339143

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Linux 5.15.61

Link: https://lore.kernel.org/r/20220815180337.130757997@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220816124544.577833376@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Resolve some cleanup issues following SLI path refactoring

commit e27f05147bff21408c1b8410ad8e90cd286e7952 upstream.

Following refactoring and consolidation in SLI processing, fix up some
minor issues related to SLI path:

 - Correct the setting of LPFC_EXCHANGE_BUSY flag in response IOCB.

 - Fix some typographical errors.

 - Fix duplicate log messages.

Link: https://lore.kernel.org/r/20220603174329.63777-4-jsmart2021@gmail.com
Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4")
Cc: <stable@vger.kernel.org> # v5.18
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix element offset in __lpfc_sli_release_iocbq_s4()

commit 84c6f99e39074d45f75986e42ca28e27c140fd0d upstream.

The prior commit that moved from iocb elements to explicit wqe elements
missed a name change.

Correct __lpfc_sli_release_iocbq_s4() to reference wqe rather than iocb.

Link: https://lore.kernel.org/r/20220506035519.50908-2-jsmart2021@gmail.com
Fixes: a680a9298e7b ("scsi: lpfc: SLI path split: Refactor lpfc_iocbq")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix locking for lpfc_sli_iocbq_lookup()

commit c26bd6602e1d348bfa754dc55e5608c922dd2801 upstream.

The rules changed for lpfc_sli_iocbq_lookup() vs locking. Prior, the
routine properly took out the lock. In newly refactored code, the locks
must be held when calling the routine.

Fix lpfc_sli_process_sol_iocb() to take the locks before calling the
routine.

Fix lpfc_sli_handle_fast_ring_event() to not release the locks to call the
routine.

Link: https://lore.kernel.org/r/20220323205545.81814-3-jsmart2021@gmail.com
Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4")
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: Move devm_drm_of_get_bridge to bridge/panel.c

commit d4ae66f10c8b9959dce1766d9a87070e567236eb upstream.

By depending on devm_drm_panel_bridge_add(), devm_drm_of_get_bridge()
introduces a circular dependency between the modules drm (where
devm_drm_of_get_bridge() ends up) and drm_kms_helper (where
devm_drm_panel_bridge_add() is).

Fix this by moving devm_drm_of_get_bridge() to bridge/panel.c and thus
drm_kms_helper.

Fixes: 87ea95808d53 ("drm/bridge: Add a function to abstract away panels")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917180925.2602266-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression

commit 332f1795ca202489c665a75e62e18ff6284de077 upstream.

The patch d0be8347c623: "Bluetooth: L2CAP: Fix use-after-free caused
by l2cap_chan_put" from Jul 21, 2022, leads to the following Smatch
static checker warning:

        net/bluetooth/l2cap_core.c:1977 l2cap_global_chan_by_psm()
        error: we previously assumed 'c' could be null (see line 1996)

Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP"

commit 6fd2c17fb6e02a8c0ab51df1cfec82ce96b8e83d upstream.

This reverts commit 36a15e1cb134c0395261ba1940762703f778438c.

The usage of FLAG_SEND_ZLP causes problems to other firmware/hardware
versions that have no issues.

The FLAG_SEND_ZLP is not safe to use in this context.
See:
https://patchwork.ozlabs.org/project/netdev/patch/1270599787.8900.8.camel@Linuxdev4-laptop/#118378
The original problem needs another way to solve.

Fixes: 36a15e1cb134 ("net: usb: ax88179_178a needs FLAG_SEND_ZLP")
Cc: stable@vger.kernel.org
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216327
Link: https://bugs.archlinux.org/task/75491
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: mem-account pbuf buckets

commit cc18cc5e82033d406f54144ad6f8092206004684 upstream.

Potentially, someone may create as many pbuf bucket as there are indexes
in an xarray without any other restrictions bounding our memory usage,
put memory needed for the buckets under memory accounting.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d34c452e45793e978d26e2606211ec9070d329ea.1659622312.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: Fix refcount leak in meson_encoder_hdmi_init

commit 7381076809586528e2a812a709e2758916318a99 upstream.

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() in error path to avoid refcount
leak.

Fixes: 0af5e0b41110 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511054052.51981-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: Fix dirtyfb refcounting

commit 9225b337072a10bf9b09df8bf281437488dd8a26 upstream.

refcount_t complains about 0->1 transitions, which isn't *quite* what we
wanted.  So use dirtyfb==1 to mean that the fb is not connected to any
output that requires dirtyfb flushing, so that we can keep the underflow
and overflow checking.

Fixes: 9e4dde28e9cd ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304202146.845566-1-robdclark@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/perf: Avoid -Warray-bounds warning for __rel_loc macro

commit c6d777acdf8f62d4ebaef0e5c6cd8fedbd6e8546 upstream.

As done for trace_events.h, also fix the __rel_loc macro in perf.h,
which silences the -Warray-bounds warning:

In file included from ./include/linux/string.h:253,
                 from ./include/linux/bitmap.h:11,
                 from ./include/linux/cpumask.h:12,
                 from ./include/linux/mm_types_task.h:14,
                 from ./include/linux/mm_types.h:5,
                 from ./include/linux/buildid.h:5,
                 from ./include/linux/module.h:14,
                 from samples/trace_events/trace-events-sample.c:2:
In function '__fortify_strcpy',
    inlined from 'perf_trace_foo_rel_loc' at samples/trace_events/./trace-events-sample.h:519:1:
./include/linux/fortify-string.h:47:33: warning: '__builtin_strcpy' offset 12 is out of the bounds [
0, 4] [-Warray-bounds]
   47 | #define __underlying_strcpy     __builtin_strcpy
      |                                 ^
./include/linux/fortify-string.h:445:24: note: in expansion of macro '__underlying_strcpy'
  445 |                 return __underlying_strcpy(p, q);
      |                        ^~~~~~~~~~~~~~~~~~~

Also make __data struct member a proper flexible array to avoid future
problems.

Link: https://lkml.kernel.org/r/20220125220037.2738923-1-keescook@chromium.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 55de2c0b5610c ("tracing: Add '__rel_loc' using trace event macros")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: change vc4_dma_range_matches from a global to static

commit 63569d90863ff26c8b10c8971d1271c17a45224b upstream.

sparse reports
drivers/gpu/drm/vc4/vc4_drv.c:270:27: warning: symbol 'vc4_dma_range_matches' was not declared. Should it be static?

vc4_dma_range_matches is only used in vc4_drv.c, so it's storage class specifier
should be static.

Fixes: da8e393e23ef ("drm/vc4: drv: Adopt the dma configuration from the HVS or V3D component")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629200101.498138-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode

commit 2642cc6c3bbe0900ba15bab078fd15ad8baccbc5 upstream.

Simon reports that if two LAN9514 USB adapters are directly connected
without an intermediate switch, the link fails to come up and link LEDs
remain dark.  The issue was introduced by commit 1ce8b37241ed ("usbnet:
smsc95xx: Forward PHY interrupts to PHY driver to avoid polling").

The PHY suffers from a known erratum wherein link detection becomes
unreliable if Energy Detect Power-Down is used.  In poll mode, the
driver works around the erratum by briefly disabling EDPD for 640 msec
to detect a neighbor, then re-enabling it to save power.

In interrupt mode, no interrupt is signaled if EDPD is used by both link
partners, so it must not be enabled at all.

We'll recoup the power savings by enabling SUSPEND1 mode on affected
LAN95xx chips in a forthcoming commit.

Fixes: 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling")
Reported-by: Simon Han <z.han@kunbus.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: tc358767: Fix (e)DP bridge endpoint parsing in dedicated function

commit 9030a9e571b3ba250d3d450a98310e3c74ecaff4 upstream.

Per toshiba,tc358767.yaml DT binding document, port@2 the output (e)DP
port is optional. In case this port is not described in DT, the bridge
driver operates in DPI-to-DP mode. The drm_of_find_panel_or_bridge()
call in tc_probe_edp_bridge_endpoint() returns -ENODEV in case port@2
is not present in DT and this specific return value is incorrectly
propagated outside of tc_probe_edp_bridge_endpoint() function. All
other error values must be propagated and are propagated correctly.

Return 0 in case the port@2 is missing instead, that reinstates the
original behavior before the commit this patch fixes.

Fixes: 8478095a8c4b ("drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into dedicated function")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428213132.447890-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "s390/smp: enforce lowcore protection on CPU restart"

commit 953503751a426413ea8aee2299ae3ee971b70d9b upstream.

This reverts commit 6f5c672d17f583b081e283927f5040f726c54598.

This breaks normal crash dump when CPU0 is offline.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv"

commit 5f8954e099b8ae96e7de1bb95950e00c85bedd40 upstream.

This reverts commit a52ed4866d2b90dd5e4ae9dabd453f3ed8fa3cbc as it
causes build problems in linux-next.  It needs to be reintroduced in a
way that can allow the api to evolve and not require a "flag day" to
catch all users.

Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au
Cc: Duoming Zhou <duoming@zju.edu.cn>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: lib/blake2s - reduce stack frame usage in self test

commit d6c14da474bf260d73953fbf7992c98d9112aec7 upstream.

Using 3 blocks here doesn't give us much more than using 2, and it
causes a stack frame size warning on certain compiler/config/arch
combinations:

   lib/crypto/blake2s-selftest.c: In function 'blake2s_selftest':
>> lib/crypto/blake2s-selftest.c:632:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=]
     632 | }
         | ^

So this patch just reduces the block from 3 to 2, which makes the
warning go away.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-crypto/202206200851.gE3MHCgd-lkp@intel.com
Fixes: 2d16803c562e ("crypto: blake2s - remove shash module")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix over estimation in sk_forced_mem_schedule()

commit c4ee118561a0f74442439b7b5b486db1ac1ddfeb upstream.

sk_forced_mem_schedule() has a bug similar to ones fixed
in commit 7c80b038d23e ("net: fix sk_wmem_schedule() and
sk_rmem_schedule() errors")

While this bug has little chance to trigger in old kernels,
we need to fix it before the following patch.

Fixes: d83769a580f1 ("tcp: fix possible deadlock in tcp_send_fin()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix a memory leak where sta_info is not freed

commit 8f9dcc29566626f683843ccac6113a12208315ca upstream.

The following is from a system that went OOM due to a memory leak:

wlan0: Allocated STA 74:83:c2:64:0b:87
wlan0: Allocated STA 74:83:c2:64:0b:87
wlan0: IBSS finish 74:83:c2:64:0b:87 (---from ieee80211_ibss_add_sta)
wlan0: Adding new IBSS station 74:83:c2:64:0b:87
wlan0: moving STA 74:83:c2:64:0b:87 to state 2
wlan0: moving STA 74:83:c2:64:0b:87 to state 3
wlan0: Inserted STA 74:83:c2:64:0b:87
wlan0: IBSS finish 74:83:c2:64:0b:87 (---from ieee80211_ibss_work)
wlan0: Adding new IBSS station 74:83:c2:64:0b:87
wlan0: moving STA 74:83:c2:64:0b:87 to state 2
wlan0: moving STA 74:83:c2:64:0b:87 to state 3
.
.
wlan0: expiring inactive not authorized STA 74:83:c2:64:0b:87
wlan0: moving STA 74:83:c2:64:0b:87 to state 2
wlan0: moving STA 74:83:c2:64:0b:87 to state 1
wlan0: Removed STA 74:83:c2:64:0b:87
wlan0: Destroyed STA 74:83:c2:64:0b:87

The ieee80211_ibss_finish_sta() is called twice on the same STA from 2
different locations. On the second attempt, the allocated STA is not
destroyed creating a kernel memory leak.

This is happening because sta_info_insert_finish() does not call
sta_info_free() the second time when the STA already exists (returns
-EEXIST). Note that the caller sta_info_insert_rcu() assumes STA is
destroyed upon errors.

Same fix is applied to -ENOMEM.

Signed-off-by: Ahmed Zaki <anzaki@gmail.com>
Link: https://lore.kernel.org/r/20211002145329.3125293-1-anzaki@gmail.com
[change the error path label to use the existing code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Viacheslav Sablin <sablin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: cls_route: remove from list when handle is 0

commit 9ad36309e2719a884f946678e0296be10f0bb4c1 upstream.

When a route filter is replaced and the old filter has a 0 handle, the old
one won't be removed from the hashtable, while it will still be freed.

The test was there since before commit 1109c00547fc ("net: sched: RCU
cls_route"), when a new filter was not allocated when there was an old one.
The old filter was reused and the reinserting would only be necessary if an
old filter was replaced. That was still wrong for the same case where the
old handle was 0.

Remove the old filter from the list independently from its handle value.

This fixes CVE-2022-2588, also reported as ZDI-CAN-17440.

Reported-by: Zhenpeng Lin <zplin@u.northwestern.edu>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Kamal Mostafa <kamal@canonical.com>
Cc: <stable@vger.kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220809170518.164662-1-cascardo@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Use a struct alignof to determine trace event field alignment

commit 4c3d2f9388d36eb28640a220a6f908328442d873 upstream.

alignof() gives an alignment of types as they would be as standalone
variables. But alignment in structures might be different, and when
building the fields of events, the alignment must be the actual
alignment otherwise the field offsets may not match what they actually
are.

This caused trace-cmd to crash, as libtraceevent did not check if the
field offset was bigger than the event. The write_msr and read_msr
events on 32 bit had their fields incorrect, because it had a u64 field
between two ints. alignof(u64) would give 8, but the u64 field was at a
4 byte alignment.

Define a macro as:

   ALIGN_STRUCTFIELD(type) ((int)(offsetof(struct {char a; type b;}, b)))

which gives the actual alignment of types in a structure.

Link: https://lkml.kernel.org/r/20220731015928.7ab3a154@rorschach.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix eh field when calling lwarx on PPC32

commit 18db466a9a306406dab3b134014d9f6ed642471c upstream.

Commit 9401f4e46cf6 ("powerpc: Use lwarx/ldarx directly instead of
PPC_LWARX/LDARX macros") properly handled the eh field of lwarx
in asm/bitops.h but failed to clear it for PPC32 in
asm/simple_spinlock.h

So, do as in arch_atomic_try_cmpxchg_lock(), set it to 1 if PPC64
but set it to 0 if PPC32. For that use IS_ENABLED(CONFIG_PPC64) which
returns 1 when CONFIG_PPC64 is set and 0 otherwise.

Fixes: 9401f4e46cf6 ("powerpc: Use lwarx/ldarx directly instead of PPC_LWARX/LDARX macros")
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Use symbolic names, use 'n' constraint per Segher]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a1176e19e627dd6a1b8d24c6c457a8ab874b7d12.1659430931.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: Apply 'feature_persistent' parameter when connect

commit 402c43ea6b34a1b371ffeed9adf907402569eaf5 upstream.

In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect.  In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.

However, commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.

Similar behavioral change has made on 'blkfront' by commit 74a852479c68
("xen-blkfront: add a parameter for disabling of persistent grants").
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous behavior of 'blkfront' can be
restored.

[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/

Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: Apply 'feature_persistent' parameter when connect

commit e94c6101e151b019b8babc518ac2a6ada644a5a1 upstream.

In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect.  In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.

However, commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.

This commit changes the behavior of the parameter to make effect for
every connect, so that the previous workflow can work again as expected.

[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/

Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com>
Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: fix persistent grants negotiation

commit fc9be616bb8f3ed9cf560308f86904f5c06be205 upstream.

Persistent grants feature can be used only when both backend and the
frontend supports the feature.  The feature was always supported by
'blkback', but commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has introduced a parameter for
disabling it runtime.

To avoid the parameter be updated while being used by 'blkback', the
commit caches the parameter into 'vbd->feature_gnt_persistent' in
'xen_vbd_create()', and then check if the guest also supports the
feature and finally updates the field in 'connect_ring()'.

However, 'connect_ring()' could be called before 'xen_vbd_create()', so
later execution of 'xen_vbd_create()' can wrongly overwrite 'true' to
'vbd->feature_gnt_persistent'.  As a result, 'blkback' could try to use
'persistent grants' feature even if the guest doesn't support the
feature.

This commit fixes the issue by moving the parameter value caching to
'xen_blkif_alloc()', which allocates the 'blkif'.  Because the struct
embeds 'vbd' object, which will be used by 'connect_ring()' later, this
should be called before 'connect_ring()' and therefore this should be
the right and safe place to do the caching.

Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: eventlog: Fix section mismatch for DEBUG_SECTION_MISMATCH

[ Upstream commit bed4593645366ad7362a3aa7bc0d100d8d8236a8 ]

If DEBUG_SECTION_MISMATCH enabled, __calc_tpm2_event_size() will not be
inlined, this cause section mismatch like this:

WARNING: modpost: vmlinux.o(.text.unlikely+0xe30c): Section mismatch in reference from the variable L0 to the function .init.text:early_ioremap()
The function L0() references
the function __init early_memremap().
This is often because L0 lacks a __init
annotation or the annotation of early_ioremap is wrong.

Fix it by using __always_inline instead of inline for the called-once
function __calc_tpm2_event_size().

Fixes: 44038bc514a2 ("tpm: Abstract crypto agile event size calculations")
Cc: stable@vger.kernel.org # v5.3
Reported-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KEYS: asymmetric: enforce SM2 signature use pkey algo

[ Upstream commit 0815291a8fd66cdcf7db1445d4d99b0d16065829 ]

The signature verification of SM2 needs to add the Za value and
recalculate sig->digest, which requires the detection of the pkey_algo
in public_key_verify_signature(). As Eric Biggers said, the pkey_algo
field in sig is attacker-controlled and should be use pkey->pkey_algo
instead of sig->pkey_algo, and secondly, if sig->pkey_algo is NULL, it
will also cause signature verification failure.

The software_key_determine_akcipher() already forces the algorithms
are matched, so the SM3 algorithm is enforced in the SM2 signature,
although this has been checked, we still avoid using any algorithm
information in the signature as input.

Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix race when reusing xattr blocks

[ Upstream commit 65f8b80053a1b2fd602daa6814e62d6fa90e5e9b ]

When ext4_xattr_block_set() decides to remove xattr block the following
race can happen:

CPU1                                    CPU2
ext4_xattr_block_set()                  ext4_xattr_release_block()
  new_bh = ext4_xattr_block_cache_find()

                                          lock_buffer(bh);
                                          ref = le32_to_cpu(BHDR(bh)->h_refcount);
                                          if (ref == 1) {
                                            ...
                                            mb_cache_entry_delete();
                                            unlock_buffer(bh);
                                            ext4_free_blocks();
                                              ...
                                              ext4_forget(..., bh, ...);
                                                jbd2_journal_revoke(..., bh);

  ext4_journal_get_write_access(..., new_bh, ...)
    do_get_write_access()
      jbd2_journal_cancel_revoke(..., new_bh);

Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.

Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.

Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com>
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: unindent codeblock in ext4_xattr_block_set()

[ Upstream commit fd48e9acdf26d0cbd80051de07d4a735d05d29b2 ]

Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.

CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: use kmemdup() to replace kmalloc + memcpy

[ Upstream commit 4efd9f0d120c55b08852ee5605dbb02a77089a5d ]

Replace kmalloc + memcpy with kmemdup()

Signed-off-by: Shuqi Zhang <zhangshuqi3@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525030120.803330-1-zhangshuqi3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: remove EA inode entry from mbcache on inode eviction

[ Upstream commit 6bc0d63dad7f9f54d381925ee855b402f652fa39 ]

Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.

CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: make sure ext4_append() always allocates new block

[ Upstream commit b8a04fe77ef1360fbf73c80fddbdfeaa9407ed1b ]

ext4_append() must always allocate a new block, otherwise we run the
risk of overwriting existing directory block corrupting the directory
tree in the process resulting in all manner of problems later on.

Add a sanity check to see if the logical block is already allocated and
error out if it is.

Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: check if directory block is within i_size

[ Upstream commit 65f8ea4cd57dbd46ea13b41dc8bac03176b04233 ]

Currently ext4 directory handling code implicitly assumes that the
directory blocks are always within the i_size. In fact ext4_append()
will attempt to allocate next directory block based solely on i_size and
the i_size is then appropriately increased after a successful
allocation.

However, for this to work it requires i_size to be correct. If, for any
reason, the directory inode i_size is corrupted in a way that the
directory tree refers to a valid directory block past i_size, we could
end up corrupting parts of the directory tree structure by overwriting
already used directory blocks when modifying the directory.

Fix it by catching the corruption early in __ext4_read_dirblock().

Addresses Red-Hat-Bugzilla: #2070205
CVE: CVE-2022-1184
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix warning in ext4_iomap_begin as race between bmap and write

[ Upstream commit 51ae846cff568c8c29921b1b28eb2dfbcd4ac12d ]

We got issue as follows:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 9310 at fs/ext4/inode.c:3441 ext4_iomap_begin+0x182/0x5d0
RIP: 0010:ext4_iomap_begin+0x182/0x5d0
RSP: 0018:ffff88812460fa08 EFLAGS: 00010293
RAX: ffff88811f168000 RBX: 0000000000000000 RCX: ffffffff97793c12
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff88812c669160 R08: ffff88811f168000 R09: ffffed10258cd20f
R10: ffff88812c669077 R11: ffffed10258cd20e R12: 0000000000000001
R13: 00000000000000a4 R14: 000000000000000c R15: ffff88812c6691ee
FS:  00007fd0d6ff3740(0000) GS:ffff8883af180000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd0d6dda290 CR3: 0000000104a62000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 iomap_apply+0x119/0x570
 iomap_bmap+0x124/0x150
 ext4_bmap+0x14f/0x250
 bmap+0x55/0x80
 do_vfs_ioctl+0x952/0xbd0
 __x64_sys_ioctl+0xc6/0x170
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Above issue may happen as follows:
          bmap                    write
bmap
  ext4_bmap
    iomap_bmap
      ext4_iomap_begin
                            ext4_file_write_iter
      ext4_buffered_write_iter
        generic_perform_write
  ext4_da_write_begin
    ext4_da_write_inline_data_begin
      ext4_prepare_inline_data
        ext4_create_inline_data
  ext4_set_inode_flag(inode,
EXT4_INODE_INLINE_DATA);
      if (WARN_ON_ONCE(ext4_has_inline_data(inode))) ->trigger bug_on

To solved above issue hold inode lock in ext4_bamp.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220617013935.397596-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: correct the misjudgment in ext4_iget_extra_inode

[ Upstream commit fd7e672ea98b95b9d4c9dae316639f03c16a749d ]

Use the EXT4_INODE_HAS_XATTR_SPACE macro to more accurately
determine whether the inode have xattr space.

Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: correct max_inline_xattr_value_size computing

[ Upstream commit c9fd167d57133c5b748d16913c4eabc55e531c73 ]

If the ext4 inode does not have xattr space, 0 is returned in the
get_max_inline_xattr_value_size function. Otherwise, the function returns
a negative value when the inode does not contain EXT4_STATE_XATTR.

Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix use-after-free in ext4_xattr_set_entry

[ Upstream commit 67d7d8ad99beccd9fe92d585b87f1760dc9018e3 ]

Hulk Robot reported a issue:
==================================================================
BUG: KASAN: use-after-free in ext4_xattr_set_entry+0x18ab/0x3500
Write of size 4105 at addr ffff8881675ef5f4 by task syz-executor.0/7092

CPU: 1 PID: 7092 Comm: syz-executor.0 Not tainted 4.19.90-dirty #17
Call Trace:
[...]
 memcpy+0x34/0x50 mm/kasan/kasan.c:303
 ext4_xattr_set_entry+0x18ab/0x3500 fs/ext4/xattr.c:1747
 ext4_xattr_ibody_inline_set+0x86/0x2a0 fs/ext4/xattr.c:2205
 ext4_xattr_set_handle+0x940/0x1300 fs/ext4/xattr.c:2386
 ext4_xattr_set+0x1da/0x300 fs/ext4/xattr.c:2498
 __vfs_setxattr+0x112/0x170 fs/xattr.c:149
 __vfs_setxattr_noperm+0x11b/0x2a0 fs/xattr.c:180
 __vfs_setxattr_locked+0x17b/0x250 fs/xattr.c:238
 vfs_setxattr+0xed/0x270 fs/xattr.c:255
 setxattr+0x235/0x330 fs/xattr.c:520
 path_setxattr+0x176/0x190 fs/xattr.c:539
 __do_sys_lsetxattr fs/xattr.c:561 [inline]
 __se_sys_lsetxattr fs/xattr.c:557 [inline]
 __x64_sys_lsetxattr+0xc2/0x160 fs/xattr.c:557
 do_syscall_64+0xdf/0x530 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x459fe9
RSP: 002b:00007fa5e54b4c08 EFLAGS: 00000246 ORIG_RAX: 00000000000000bd
RAX: ffffffffffffffda RBX: 000000000051bf60 RCX: 0000000000459fe9
RDX: 00000000200003c0 RSI: 0000000020000180 RDI: 0000000020000140
RBP: 000000000051bf60 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000001009 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc73c93fc0 R14: 000000000051bf60 R15: 00007fa5e54b4d80
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
ext4_xattr_set
  ext4_xattr_set_handle
    ext4_xattr_ibody_find
      >> s->end < s->base
      >> no EXT4_STATE_XATTR
      >> xattr_check_inode is not executed
    ext4_xattr_ibody_set
      ext4_xattr_set_entry
       >> size_t min_offs = s->end - s->base
       >> UAF in memcpy

we can easily reproduce this problem with the following commands:
    mkfs.ext4 -F /dev/sda
    mount -o debug_want_extra_isize=128 /dev/sda /mnt
    touch /mnt/file
    setfattr -n user.cat -v `seq -s z 4096|tr -d '[:digit:]'` /mnt/file

In ext4_xattr_ibody_find, we have the following assignment logic:
  header = IHDR(inode, raw_inode)
         = raw_inode + EXT4_GOOD_OLD_INODE_SIZE + i_extra_isize
  is->s.base = IFIRST(header)
             = header + sizeof(struct ext4_xattr_ibody_header)
  is->s.end = raw_inode + s_inode_size

In ext4_xattr_set_entry
  min_offs = s->end - s->base
           = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize -
     sizeof(struct ext4_xattr_ibody_header)
  last = s->first
  free = min_offs - ((void *)last - s->base) - sizeof(__u32)
       = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize -
         sizeof(struct ext4_xattr_ibody_header) - sizeof(__u32)

In the calculation formula, all values except s_inode_size and
i_extra_size are fixed values. When i_extra_size is the maximum value
s_inode_size - EXT4_GOOD_OLD_INODE_SIZE, min_offs is -4 and free is -8.
The value overflows. As a result, the preceding issue is triggered when
memcpy is executed.

Therefore, when finding xattr or setting xattr, check whether
there is space for storing xattr in the inode to resolve this issue.

Cc: stable@kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: add EXT4_INODE_HAS_XATTR_SPACE macro in xattr.h

[ Upstream commit 179b14152dcb6a24c3415200603aebca70ff13af ]

When adding an xattr to an inode, we must ensure that the inode_size is
not less than EXT4_GOOD_OLD_INODE_SIZE + extra_isize + pad. Otherwise,
the end position may be greater than the start position, resulting in UAF.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220616021358.2504451-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix extent status tree race in writeback error recovery path

[ Upstream commit 7f0d8e1d607c1a4fa9a27362a108921d82230874 ]

A race can occur in the unlikely event ext4 is unable to allocate a
physical cluster for a delayed allocation in a bigalloc file system
during writeback.  Failure to allocate a cluster forces error recovery
that includes a call to mpage_release_unused_pages().  That function
removes any corresponding delayed allocated blocks from the extent
status tree.  If a new delayed write is in progress on the same cluster
simultaneously, resulting in the addition of an new extent containing
one or more blocks in that cluster to the extent status tree, delayed
block accounting can be thrown off if that delayed write then encounters
a similar cluster allocation failure during future writeback.

Write lock the i_data_sem in mpage_release_unused_pages() to fix this
problem.  Ext4's block/cluster accounting code for bigalloc relies on
i_data_sem for mutual exclusion, as is found in the delayed write path,
and the locking in mpage_release_unused_pages() is missing.

Cc: stable@kernel.org
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220615160530.1928801-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: update s_overhead_clusters in the superblock during an on-line resize

[ Upstream commit de394a86658ffe4e89e5328fd4993abfe41b7435 ]

When doing an online resize, the on-disk superblock on-disk wasn't
updated.  This means that when the file system is unmounted and
remounted, and the on-disk overhead value is non-zero, this would
result in the results of statfs(2) to be incorrect.

This was partially fixed by Commits 10b01ee92df5 ("ext4: fix overhead
calculation to account for the reserved gdt blocks"), 85d825dbf489
("ext4: force overhead calculation if the s_overhead_cluster makes no
sense"), and eb7054212eac ("ext4: update the cached overhead value in
the superblock").

However, since it was too expensive to forcibly recalculate the
overhead for bigalloc file systems at every mount, this didn't fix the
problem for bigalloc file systems.  This commit should address the
problem when resizing file systems with the bigalloc feature enabled.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Avoid -Warray-bounds warning for __rel_loc macro

[ Upstream commit 58c5724ec2cdd72b22107ec5de00d90cc4797796 ]

Since -Warray-bounds checks the destination size from the type of given
pointer, __assign_rel_str() macro gets warned because it passes the
pointer to the 'u32' field instead of 'trace_event_raw_*' data structure.
Pass the data address calculated from the 'trace_event_raw_*' instead of
'u32' __rel_loc field.

Link: https://lkml.kernel.org/r/20220125233154.dac280ed36944c0c2fe6f3ac@kernel.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ This did not fix the warning, but is still a nice clean up ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Add '__rel_loc' using trace event macros

[ Upstream commit 55de2c0b5610cba5a5a93c0788031133c457e689 ]

Add '__rel_loc' using trace event macros. These macros are usually
not used in the kernel, except for testing purpose.
This also add "rel_" variant of macros for dynamic_array string,
and bitmask.

Link: https://lkml.kernel.org/r/163757342119.510314.816029622439099016.stgit@devnote2
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm raid: fix address sanitizer warning in raid_resume

[ Upstream commit 7dad24db59d2d2803576f2e3645728866a056dab ]

There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm raid: fix address sanitizer warning in raid_status

[ Upstream commit 1fbeea217d8f297fe0e0956a1516d14ba97d0396 ]

There is this warning when using a kernel with the address sanitizer
and running this testsuite:
https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid

==================================================================
BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid]
Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319
CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 <TASK>
 dump_stack_lvl+0x6a/0x9c
 print_address_description.constprop.0+0x1f/0x1e0
 print_report.cold+0x55/0x244
 kasan_report+0xc9/0x100
 raid_status+0x1747/0x2820 [dm_raid]
 dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod]
 table_load+0x35c/0x630 [dm_mod]
 ctl_ioctl+0x411/0x630 [dm_mod]
 dm_ctl_ioctl+0xa/0x10 [dm_mod]
 __x64_sys_ioctl+0x12a/0x1a0
 do_syscall_64+0x5b/0x80

The warning is caused by reading conf->max_nr_stripes in raid_status. The
code in raid_status reads mddev->private, casts it to struct r5conf and
reads the entry max_nr_stripes.

However, if we have different raid type than 4/5/6, mddev->private
doesn't point to struct r5conf; it may point to struct r0conf, struct
r1conf, struct r10conf or struct mpconf. If we cast a pointer to one
of these structs to struct r5conf, we will be reading invalid memory
and KASAN warns about it.

Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: Attempt to load PERF_GLOBAL_CTRL on nVMX xfer iff it exists

[ Upstream commit 4496a6f9b45e8cd83343ad86a3984d614e22cf54 ]

Attempt to load PERF_GLOBAL_CTRL during nested VM-Enter/VM-Exit if and
only if the MSR exists (according to the guest vCPU model).  KVM has very
misguided handling of VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL and
attempts to force the nVMX MSR settings to match the vPMU model, i.e. to
hide/expose the control based on whether or not the MSR exists from the
guest's perspective.

KVM's modifications fail to handle the scenario where the vPMU is hidden
from the guest _after_ being exposed to the guest, e.g. by userspace
doing multiple KVM_SET_CPUID2 calls, which is allowed if done before any
KVM_RUN.  nested_vmx_pmu_refresh() is called if and only if there's a
recognized vPMU, i.e. KVM will leave the bits in the allow state and then
ultimately reject the MSR load and WARN.

KVM should not force the VMX MSRs in the first place.  KVM taking control
of the MSRs was a misguided attempt at mimicking what commit 5f76f6f5ff96
("KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled",
2018-10-01) did for MPX.  However, the MPX commit was a workaround for
another KVM bug and not something that should be imitated (and it should
never been done in the first place).

In other words, KVM's ABI _should_ be that userspace has full control
over the MSRs, at which point triggering the WARN that loading the MSR
must not fail is trivial.

The intent of the WARN is still valid; KVM has consistency checks to
ensure that vmcs12->{guest,host}_ia32_perf_global_ctrl is valid.  The
problem is that '0' must be considered a valid value at all times, and so
the simple/obvious solution is to just not actually load the MSR when it
does not exist.  It is userspace's responsibility to provide a sane vCPU
model, i.e. KVM is well within its ABI and Intel's VMX architecture to
skip the loads if the MSR does not exist.

Fixes: 03a8871add95 ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL VM-{Entry,Exit} control")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220722224409.1336532-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Add helper to check if the guest PMU has PERF_GLOBAL_CTRL

[ Upstream commit b663f0b5f3d665c261256d1f76e98f077c6e56af ]

Add a helper to check of the guest PMU has PERF_GLOBAL_CTRL, which is
unintuitive _and_ diverges from Intel's architecturally defined behavior.
Even worse, KVM currently implements the check using two different (but
equivalent) checks, _and_ there has been at least one attempt to add a
_third_ flavor.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220722224409.1336532-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/pmu: Ignore pmu->global_ctrl check if vPMU doesn't support global_ctrl

[ Upstream commit 98defd2e17803263f49548fea930cfc974d505aa ]

MSR_CORE_PERF_GLOBAL_CTRL is introduced as part of Architecture PMU V2,
as indicated by Intel SDM 19.2.2 and the intel_is_valid_msr() function.

So in the absence of global_ctrl support, all PMCs are enabled as AMD does.

Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220509102204.62389-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Mark all PERF_GLOBAL_(OVF)_CTRL bits reserved if there's no vPMU

[ Upstream commit 93255bf92939d948bc86d81c6bb70bb0fecc5db1 ]

Mark all MSR_CORE_PERF_GLOBAL_CTRL and MSR_CORE_PERF_GLOBAL_OVF_CTRL bits
as reserved if there is no guest vPMU.  The nVMX VM-Entry consistency
checks do not check for a valid vPMU prior to consuming the masks via
kvm_valid_perf_global_ctrl(), i.e. may incorrectly allow a non-zero mask
to be loaded via VM-Enter or VM-Exit (well, attempted to be loaded, the
actual MSR load will be rejected by intel_is_valid_msr()).

Fixes: f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220722224409.1336532-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/pmu: Introduce the ctrl_mask value for fixed counter

[ Upstream commit 2c985527dd8d283e786ad7a67e532ef7f6f00fac ]

The mask value of fixed counter control register should be dynamic
adjusted with the number of fixed counters. This patch introduces a
variable that includes the reserved bits of fixed counter control
registers. This is a generic code refactoring.

Co-developed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-6-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv/kvm: Use darn for H_RANDOM on Power9

[ Upstream commit 7ef3d06f1bc4a5e62273726f3dc2bd258ae1c71f ]

The existing logic in KVM to support guests calling H_RANDOM only works
on Power8, because it looks for an RNG in the device tree, but on Power9
we just use darn.

In addition the existing code needs to work in real mode, so we have the
special cased powernv_get_random_real_mode() to deal with that.

Instead just have KVM call ppc_md.get_random_seed(), and do the real
mode check inside of there, that way we use whatever RNG is available,
including darn on Power9.

Fixes: e928e9cb3601 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Rebase on previous commit, update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: CPPC: Do not prevent CPPC from working in the future

[ Upstream commit 4f4179fcf420873002035cf1941d844c9e0e7cb3 ]

There is a problem with the current revision checks in
is_cppc_supported() that they essentially prevent the CPPC support
from working if a new _CPC package format revision being a proper
superset of the v3 and only causing _CPC to return a package with more
entries (while retaining the types and meaning of the entries defined by
the v3) is introduced in the future and used by the platform firmware.

In that case, as long as the number of entries in the _CPC return
package is at least CPPC_V3_NUM_ENT, it should be perfectly fine to
use the v3 support code and disregard the additional package entries
added by the new package format revision.

For this reason, drop is_cppc_supported() altogether, put the revision
checks directly into acpi_cppc_processor_probe() so they are easier to
follow and rework them to take the case mentioned above into account.

Fixes: 4773e77cdc9b ("ACPI / CPPC: Add support for CPPC v3")
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: properly flag filesystem with BTRFS_FEATURE_INCOMPAT_BIG_METADATA

[ Upstream commit e26b04c4c91925dba57324db177a24e18e2d0013 ]

Commit 6f93e834fa7c seemingly inadvertently moved the code responsible
for flagging the filesystem as having BIG_METADATA to a place where
setting the flag was essentially lost. This means that
filesystems created with kernels containing this bug (starting with 5.15)
can potentially be mounted by older (pre-3.4) kernels. In reality
chances for this happening are low because there are other incompat
flags introduced in the mean time. Still the correct behavior is to set
INCOMPAT_BIG_METADATA flag and persist this in the superblock.

Fixes: 6f93e834fa7c ("btrfs: fix upper limit for max_inline for page size 64K")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: reset block group chunk force if we have to wait

[ Upstream commit 1314ca78b2c35d3e7d0f097268a2ee6dc0d369ef ]

If you try to force a chunk allocation, but you race with another chunk
allocation, you will end up waiting on the chunk allocation that just
occurred and then allocate another chunk.  If you have many threads all
doing this at once you can way over-allocate chunks.

Fix this by resetting force to NO_FORCE, that way if we think we need to
allocate we can, otherwise we don't force another chunk allocation if
one is already happening.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: ensure pages are unlocked on cow_file_range() failure

[ Upstream commit 9ce7466f372d83054c7494f6b3e4b9abaf3f0355 ]

There is a hung_task report on zoned btrfs like below.

https://github.com/naota/linux/issues/59

  [726.328648] INFO: task rocksdb:high0:11085 blocked for more than 241 seconds.
  [726.329839]       Not tainted 5.16.0-rc1+ #1
  [726.330484] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [726.331603] task:rocksdb:high0   state:D stack:    0 pid:11085 ppid: 11082 flags:0x00000000
  [726.331608] Call Trace:
  [726.331611]  <TASK>
  [726.331614]  __schedule+0x2e5/0x9d0
  [726.331622]  schedule+0x58/0xd0
  [726.331626]  io_schedule+0x3f/0x70
  [726.331629]  __folio_lock+0x125/0x200
  [726.331634]  ? find_get_entries+0x1bc/0x240
  [726.331638]  ? filemap_invalidate_unlock_two+0x40/0x40
  [726.331642]  truncate_inode_pages_range+0x5b2/0x770
  [726.331649]  truncate_inode_pages_final+0x44/0x50
  [726.331653]  btrfs_evict_inode+0x67/0x480
  [726.331658]  evict+0xd0/0x180
  [726.331661]  iput+0x13f/0x200
  [726.331664]  do_unlinkat+0x1c0/0x2b0
  [726.331668]  __x64_sys_unlink+0x23/0x30
  [726.331670]  do_syscall_64+0x3b/0xc0
  [726.331674]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [726.331677] RIP: 0033:0x7fb9490a171b
  [726.331681] RSP: 002b:00007fb943ffac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
  [726.331684] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9490a171b
  [726.331686] RDX: 00007fb943ffb040 RSI: 000055a6bbe6ec20 RDI: 00007fb94400d300
  [726.331687] RBP: 00007fb943ffad00 R08: 0000000000000000 R09: 0000000000000000
  [726.331688] R10: 0000000000000031 R11: 0000000000000246 R12: 00007fb943ffb000
  [726.331690] R13: 00007fb943ffb040 R14: 0000000000000000 R15: 00007fb943ffd260
  [726.331693]  </TASK>

While we debug the issue, we found running fstests generic/551 on 5GB
non-zoned null_blk device in the emulated zoned mode also had a
similar hung issue.

Also, we can reproduce the same symptom with an error injected
cow_file_range() setup.

The hang occurs when cow_file_range() fails in the middle of
allocation. cow_file_range() called from do_allocation_zoned() can
split the give region ([start, end]) for allocation depending on
current block group usages. When btrfs can allocate bytes for one part
of the split regions but fails for the other region (e.g. because of
-ENOSPC), we return the error leaving the pages in the succeeded regions
locked. Technically, this occurs only when @unlock == 0. Otherwise, we
unlock the pages in an allocated region after creating an ordered
extent.

Considering the callers of cow_file_range(unlock=0) won't write out
the pages, we can unlock the pages on error exit from
cow_file_range(). So, we can ensure all the pages except @locked_page
are unlocked on error case.

In summary, cow_file_range now behaves like this:

- page_started == 1 (return value)
  - All the pages are unlocked. IO is started.
- unlock == 1
  - All the pages except @locked_page are unlocked in any case
- unlock == 0
  - On success, all the pages are locked for writing out them
  - On failure, all the pages except @locked_page are unlocked

Fixes: 42c011000963 ("btrfs: zoned: introduce dedicated data write path for zoned filesystems")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: don't allow the same type rq_qos add more than once

[ Upstream commit 14a6e2eb7df5c7897c15b109cba29ab0c4a791b6 ]

In our test of iocost, we encountered some list add/del corruptions of
inner_walk list in ioc_timer_fn.

The reason can be described as follows:

cpu 0 cpu 1
ioc_qos_write ioc_qos_write

ioc = q_to_ioc(queue);
if (!ioc) {
        ioc = kzalloc();
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
...
rq_qos_add(q, rqos);
}
        ...
        rq_qos_add(q, rqos);
        ...
}

When the io.cost.qos file is written by two cpus concurrently, rq_qos may
be added to one disk twice. In that case, there will be two iocs enabled
and running on one disk. They own different iocgs on their active list. In
the ioc_timer_fn function, because of the iocgs from two iocs have the
same root iocg, the root iocg's walk_list may be overwritten by each other
and this leads to list add/del corruptions in building or destroying the
inner_walk list.

And so far, the blk-rq-qos framework works in case that one instance for
one type rq_qos per queue by default. This patch make this explicit and
also fix the crash above.

Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220720093616.70584-1-hanjinke.666@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: remove the struct blk_queue_ctx forward declaration

[ Upstream commit 9778ac77c2027827ffdbb33d3e936b3a0ae9f0f9 ]

This type doesn't exist at all, so no need to forward declare it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/csd_lock: Change csdlock_debug from early_param to __setup

[ Upstream commit 9c9b26b0df270d4f9246e483a44686fca951a29c ]

The csdlock_debug kernel-boot parameter is parsed by the
early_param() function csdlock_debug().  If set, csdlock_debug()
invokes static_branch_enable() to enable csd_lock_wait feature, which
triggers a panic on arm64 for kernels built with CONFIG_SPARSEMEM=y and
CONFIG_SPARSEMEM_VMEMMAP=n.

With CONFIG_SPARSEMEM_VMEMMAP=n, __nr_to_section is called in
static_key_enable() and returns NULL, resulting in a NULL dereference
because mem_section is initialized only later in sparse_init().

This is also a problem for powerpc because early_param() functions
are invoked earlier than jump_label_init(), also resulting in
static_key_enable() failures.  These failures cause the warning "static
key 'xxx' used before call to jump_label_init()".

Thus, early_param is too early for csd_lock_wait to run
static_branch_enable(), so changes it to __setup to fix these.

Fixes: 8d0968cc6b8f ("locking/csd_lock: Add boot parameter for controlling CSD lock debugging")
Cc: stable@vger.kernel.org
Reported-by: Chen jingwen <chenjingwen6@huawei.com>
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

timekeeping: contribute wall clock to rng on time change

[ Upstream commit b8ac29b40183a6038919768b5d189c9bd91ce9b4 ]

The rng's random_init() function contributes the real time to the rng at
boot time, so that events can at least start in relation to something
particular in the real world. But this clock might not yet be set that
point in boot, so nothing is contributed. In addition, the relation
between minor clock changes from, say, NTP, and the cycle counter is
potentially useful entropic data.

This commit addresses this by mixing in a time stamp on calls to
settimeofday and adjtimex. No entropy is credited in doing so, so it
doesn't make initialization faster, but it is still useful input to
have.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: remove some dead code

[ Upstream commit 08572cd41955166e387d9b4984294d37f8f7526c ]

This code appears to be no longer used so let's get rid of it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/9p: Initialize the iounit field during fid creation

[ Upstream commit aa7aeee169480e98cf41d83c01290a37e569be6d ]

Ensure that the fid's iounit field is set to zero when a new fid is
created. Certain 9P operations, such as OPEN and CREATE, allow the
server to reply with an iounit size which the client code assigns to the
p9_fid struct shortly after the fid is created by p9_fid_create(). On
the other hand, an XATTRWALK operation doesn't allow for the server to
specify an iounit value. The iounit field of the newly allocated p9_fid
struct remained uninitialized in that case. Depending on allocation
patterns, the iounit value could have been something reasonable that was
carried over from previously freed fids or, in the worst case, could
have been arbitrary values from non-fid related usages of the memory
location.

The bug was detected in the Windows Subsystem for Linux 2 (WSL2) kernel
after the uninitialized iounit field resulted in the typical sequence of
two getxattr(2) syscalls, one to get the size of an xattr and another
after allocating a sufficiently sized buffer to fit the xattr value, to
hit an unexpected ERANGE error in the second call to getxattr(2). An
uninitialized iounit field would sometimes force rsize to be smaller
than the xattr value size in p9_client_read_once() and the 9P server in
WSL refused to chunk up the READ on the attr_fid and, instead, returned
ERANGE to the client. The virtfs server in QEMU seems happy to chunk up
the READ and this problem goes undetected there.

Link: https://lkml.kernel.org/r/20220710141402.803295-1-tyhicks@linux.microsoft.com
Fixes: ebf46264a004 ("fs/9p: Add support user. xattr")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm thin: fix use-after-free crash in dm_sm_register_threshold_callback

[ Upstream commit 3534e5a5ed2997ca1b00f44a0378a075bd05e8a3 ]

Fault inject on pool metadata device reports:
  BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
  Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950

  CPU: 7 PID: 950 Comm: dmsetup Tainted: G        W         5.19.0-rc6 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   print_address_description.constprop.0.cold+0xeb/0x3f4
   kasan_report.cold+0xe6/0x147
   dm_pool_register_metadata_threshold+0x40/0x80
   pool_ctr+0xa0a/0x1150
   dm_table_add_target+0x2c8/0x640
   table_load+0x1fd/0x430
   ctl_ioctl+0x2c4/0x5a0
   dm_ctl_ioctl+0xa/0x10
   __x64_sys_ioctl+0xb3/0xd0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

This can be easily reproduced using:
  echo offline > /sys/block/sda/device/state
  dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
  dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"

If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).

Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".

Fixes: ac8c3f3df65e4 ("dm thin: generate event when metadata threshold passed")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification

[ Upstream commit 0828c4a39be57768b8788e8cbd0d84683ea757e5 ]

commit e23a8020ce4e ("s390/kexec_file: Signature verification prototype")
adds support for KEXEC_SIG verification with keys from platform keyring
but the built-in keys and secondary keyring are not used.

Add support for the built-in keys and secondary keyring as x86 does.

Fixes: e23a8020ce4e ("s390/kexec_file: Signature verification prototype")
Cc: stable@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.ibm.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm writecache: set a default MAX_WRITEBACK_JOBS

[ Upstream commit ca7dc242e358e46d963b32f9d9dd829785a9e957 ]

dm-writecache has the capability to limit the number of writeback jobs
in progress. However, this feature was off by default. As such there
were some out-of-memory crashes observed when lowering the low
watermark while the cache is full.

This commit enables writeback limit by default. It is set to 256MiB or
1/16 of total system memory, whichever is smaller.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: 8250: Add support for Brainboxes PX cards.

[ Upstream commit ef5a03a26c87a760bc3d86b5af7b773e82f8b1b7 ]

Add support for some of the Brainboxes PCIe (PX) range of
serial cards, including the PX-101, PX-235/PX-246,
PX-203/PX-257, PX-260/PX-701, PX-310, PX-313,
PX-320/PX-324/PX-376/PX-387, PX-335/PX-346, PX-368, PX-420,
PX-803 and PX-846.

Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/AM5PR0202MB2564669252BDC59BF55A6E87C4879@AM5PR0202MB2564.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: Add proper clock handling for OxSemi PCIe devices

[ Upstream commit 366f6c955d4d1a5125ffcd6875ead26a3c7a2a1c ]

Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven
by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.

We currently drive the device using its default oversampling rate of 16
and the clock prescaler disabled, consequently yielding the baud base of
3906250.  This base is inadequate for some of the high-speed baud rates
such as 460800bps, for which the closest rate possible can be obtained
by dividing the baud base by 8, yielding the baud rate of 488281.25bps,
which is off by 5.9638%.  This is enough for data communication to break
with the remote end talking actual 460800bps, where missed stop bits
have been observed.

We can do better however, by taking advantage of a reduced oversampling
rate, which can be set to any integer value from 4 to 16 inclusive by
programming the TCR register, and by using the clock prescaler, which
can be set to any value from 1 to 63.875 in increments of 0.125 in the
CPR/CPR2 register pair.  The prescaler has to be explicitly enabled
though by setting bit 7 in the MCR or otherwise it is bypassed (in the
enhanced mode that we enable) as if the value of 1 was used.

Make use of these features then as follows:

- Set the baud base to 15625000, reflecting the minimum oversampling
  rate of 4 with the clock prescaler and divisor both set to 1.

- Override the `set_mctrl' and set the MCR shadow there so as to have
  MCR[7] always set and have the 8250 core propagate these settings.

- Override the `get_divisor' handler and determine a good combination of
  parameters by using a lookup table with predetermined value pairs of
  the oversampling rate and the clock prescaler and finding a pair that
  divides the input clock such that the quotient, when rounded to the
  nearest integer, deviates the least from the exact result.  Calculate
  the clock divisor accordingly.

  Scale the resulting oversampling rate (only by powers of two) if
  possible so as to maximise it, reducing the divisor accordingly, and
  avoid a divisor overflow for very low baud rates by scaling the
  oversampling rate and/or the prescaler even if that causes some
  accuracy loss.

  Also handle the historic spd_cust feature so as to allow one to set
  all the three parameters manually to arbitrary values, by keeping the
  low 16 bits for the divisor and then putting TCR in bits 19:16 and
  CPR/CPR2 in bits 28:20, sanitising the bit pattern supplied such as
  to clamp CPR/CPR2 values between 0.000 and 0.875 inclusive to 33.875.
  This preserves compatibility with any existing setups, that is where
  requesting a custom divisor that only has any bits set among the low
  16 the oversampling rate of 16 and the clock prescaler of 33.875 will
  be used as with the original 8250.

  Finally abuse the `frac' argument to store the determined bit patterns
  for the TCR, CPR and CPR2 registers.

- Override the `set_divisor' handler so as to set the TCR, CPR and CPR2
  registers from the `frac' value supplied.  Set the divisor as usual.

With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX
limitation imposed by `serial8250_get_baud_rate' standard baud rates
below 300bps become unavailable in the regular way, e.g. the rate of
200bps requires the baud base to be divided by 78125 and that is beyond
the unsigned 16-bit range.  The historic spd_cust feature can still be
used to obtain such rates if so required.

See Documentation/tty/device_drivers/oxsemi-tornado.rst for more details.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181519450.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: Fold EndRun device support into OxSemi Tornado code

[ Upstream commit 1f32c65bad24b9787d3e52843de375430e3df822 ]

The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and uses the same sequence to determine the
number of ports available.  Despite that we have duplicate code
specific to the EndRun device.

Remove redundant code then and factor out OxSemi Tornado device
detection.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181516220.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_pci: Replace dev_*() by pci_*() macros

[ Upstream commit 1177384179416c7136e1348f07609e0da1ae6b91 ]

PCI subsystem provides convenient shortcut macros for message printing.
Use those macros instead of dev_*().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiri Slaby <jslaby@kernel.org>
Link: https://lore.kernel.org/r/20211022135147.70965-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_pci: Refactor the loop in pci_ite887x_init()

[ Upstream commit 35b4f17231923e2f64521bdf7a2793ce2c3c74a6 ]

The loop can be refactored by using ARRAY_SIZE() instead of NULL terminator.
This reduces code base and makes it easier to read and understand.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiri Slaby <jslaby@kernel.org>
Link: https://lore.kernel.org/r/20211022135147.70965-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom: Power on PHY before IPQ8074 DBI register accesses

[ Upstream commit a0e43bb9973b06ce5c666f0901e104e2037c1b34 ]

Currently the Gen2 port in IPQ8074 will cause the system to hang as it
accesses DBI registers in qcom_pcie_init_2_3_3(), and those are only
accesible after phy_power_on().

Move the DBI read/writes to a new qcom_pcie_post_init_2_3_3(), which is
executed after phy_power_on().

Link: https://lore.kernel.org/r/20220623155004.688090-1-robimarko@gmail.com
Fixes: a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/AER: Iterate over error counters instead of error strings

[ Upstream commit 5e6ae050955b566484f3cc6a66e3925eae87a0ed ]

Previously we iterated over AER stat *names*, e.g.,
aer_correctable_error_string[32], but the actual stat *counters* may not be
that large, e.g., pdev->aer_stats->dev_cor_errs[16], which means that we
printed junk in the sysfs stats files.

Iterate over the stat counter arrays instead of the names to avoid this
junk.

Also, added a build time check to make sure all
counters have entries in strings array.

Fixes: 0678e3109a3c ("PCI/AER: Simplify __aer_print_error()")
Link: https://lore.kernel.org/r/20220509181441.31884-1-mkhalfella@purestorage.com
Reported-by: Meeta Saggi <msaggi@purestorage.com>
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Meeta Saggi <msaggi@purestorage.com>
Reviewed-by: Eric Badger <ebadger@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>