review.tizen.org Git - platform/kernel/linux-starfive.git/log

Merge tag 'sched_urgent_for_v6.5_rc2' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

- Remove a cgroup from under a polling process properly

- Fix the idle sibling selection

* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: use kernfs polling functions for PSI trigger polling
sched/fair: Use recent_used_cpu to test p->cpus_ptr

Merge tag 'pinctrl-v6.5-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"I'm mostly on vacation but what would vacation be without a few
  critical fixes so people can use their gaming laptops when hiding away
  from the sun (or rain)?

   - Fix a really annoying interrupt storm in the AMD driver affecting
     Asus TUF gaming notebooks

   - Fix device tree parsing in the Renesas driver"

* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Unify debounce handling into amd_pinconf_set()
  pinctrl: amd: Drop pull up select configuration
  pinctrl: amd: Use amd_pinconf_set() for all config options
  pinctrl: amd: Only use special debounce behavior for GPIO 0
  pinctrl: renesas: rzg2l: Handle non-unique subnode names
  pinctrl: renesas: rzv2m: Handle non-unique subnode names

Merge tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- Two reconnect fixes: important fix to address inFlight count to leak
   (which can leak credits), and fix for better handling a deleted share

- DFS fix

- SMB1 cleanup fix

- deferred close fix

* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix mid leak during reconnection after timeout threshold
  cifs: is_network_name_deleted should return a bool
  smb: client: fix missed ses refcounting
  smb: client: Fix -Wstringop-overflow issues
  cifs: if deferred close is disabled then close files immediately

Merge tag 'powerpc-6.5-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix Speculation_Store_Bypass reporting in /proc/self/status on
   Power10

- Fix HPT with 4K pages since recent changes by implementing pmd_same()

- Fix 64-bit native_hpte_remove() to be irq-safe

Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.

* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
  powerpc/64e: Fix obtool warnings in exceptions-64e.S
  powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
  powerpc/64s: Fix native_hpte_remove() to be irq-safe

Merge tag 'hardening-v6.5-rc2' of git://git./linux/kernel/git/kees/linux

Pull hardening fixes from Kees Cook:

- Remove LTO-only suffixes from promoted global function symbols
   (Yonghong Song)

- Remove unused .text..refcount section from vmlinux.lds.h (Petr Pavlu)

- Add missing __always_inline to sparc __arch_xchg() (Arnd Bergmann)

- Claim maintainership of string routines

* tag 'hardening-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  sparc: mark __arch_xchg() as __always_inline
  MAINTAINERS: Foolishly claim maintainership of string routines
  kallsyms: strip LTO-only suffixes from promoted global functions
  vmlinux.lds.h: Remove a reference to no longer used sections .text..refcount

Merge tag 'probes-fixes-v6.5-rc1-2' of git://git./linux/kernel/git/trace/linux-trace

Pull probe fixes from Masami Hiramatsu:

- fprobe: Add a comment why fprobe will be skipped if another kprobe is
   running in fprobe_kprobe_handler().

- probe-events: Fix some issues related to fetch-arguments:

    - Fix double counting of the string length for user-string and
      symstr. This will require longer buffer in the array case.

    - Fix not to count error code (minus value) for the total used
      length in array argument. This makes the total used length
      shorter.

    - Fix to update dynamic used data size counter only if fetcharg uses
      the dynamic size data. This may mis-count the used dynamic data
      size and corrupt data.

    - Revert "tracing: Add "(fault)" name injection to kernel probes"
      because that did not work correctly with a bug, and we agreed the
      current '(fault)' output (instead of '"(fault)"' like a string)
      explains what happened more clearly.

    - Fix to record 0-length (means fault access) data_loc data in fetch
      function itself, instead of store_trace_args(). If we record an
      array of string, this will fix to save fault access data on each
      entry of the array correctly.

* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
  Revert "tracing: Add "(fault)" name injection to kernel probes"
  tracing/probes: Fix to update dynamic data counter if fetcharg uses it
  tracing/probes: Fix not to count error code to total length
  tracing/probes: Fix to avoid double count of the string length on the array
  fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running

Merge tag 'spi-fix-v6.5-rc1' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A couple of fairly minor driver specific fixes here, plus a bunch of
  maintainership and admin updates. Nothing too remarkable"

* tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  mailmap: add entry for Jonas Gorski
  MAINTAINERS: add myself for spi-bcm63xx
  spi: s3c64xx: clear loopback bit after loopback test
  spi: bcm63xx: fix max prepend length
  MAINTAINERS: Add myself as a maintainer for Microchip SPI

Merge tag 'regmap-fix-v6.5-rc1' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"One fix for an out of bounds access in the interupt code here"

* tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Fix out-of-bounds access when allocating config buffers

Merge tag 'iommu-fixes-v6.5-rc1' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Fix a regression causing a crash on sysfs access of iommu-group
   specific files

- Fix signedness bug in SVA code

* tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid()
  iommu: Fix crash during syfs iommu_groups/N/type

Merge tag 'x86_urgent_for_6.5_rc2' of git://git./linux/kernel/git/tip/tip

Pull x86 CFI fixes from Peter Zijlstra:
"Fix kCFI/FineIBT weaknesses

  The primary bug Alyssa noticed was that with FineIBT enabled function
  prologues have a spurious ENDBR instruction:

    __cfi_foo:
endbr64
subl $hash, %r10d
jz 1f
ud2
nop
    1:
    foo:
endbr64 <--- *sadface*

  This means that any indirect call that fails to target the __cfi
  symbol and instead targets (the regular old) foo+0, will succeed due
  to that second ENDBR.

  Fixing this led to the discovery of a single indirect call that was
  still doing this: ret_from_fork(). Since that's an assembly stub the
  compiler would not generate the proper kCFI indirect call magic and it
  would not get patched.

  Brian came up with the most comprehensive fix -- convert the thing to
  C with only a very thin asm wrapper. This ensures the kernel thread
  boostrap is a proper kCFI call.

  While discussing all this, Kees noted that kCFI hashes could/should be
  poisoned to seal all functions whose address is never taken, further
  limiting the valid kCFI targets -- much like we already do for IBT.

  So what was a 'simple' observation and fix cascaded into a bunch of
  inter-related CFI infrastructure fixes"

* tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
  x86/fineibt: Poison ENDBR at +0
  x86: Rewrite ret_from_fork() in C
  x86/32: Remove schedule_tail_wrapper()
  x86/cfi: Extend ENDBR sealing to kCFI
  x86/alternative: Rename apply_ibt_endbr()
  x86/cfi: Extend {JMP,CAKK}_NOSPEC comment

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"This is a bunch of small driver fixes and a larger rework of zone disk
  handling (which reaches into blk and nvme).

  The aacraid array-bounds fix is now critical since the security people
  turned on -Werror for some build tests, which now fail without it"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Handle SRB status value 0x30
  scsi: block: Improve checks in blk_revalidate_disk_zones()
  scsi: block: virtio_blk: Set zone limits before revalidating zones
  scsi: block: nullblk: Set zone limits before revalidating zones
  scsi: nvme: zns: Set zone limits before revalidating zones
  scsi: sd_zbc: Set zone limits before revalidating zones
  scsi: ufs: core: Add support for qTimestamp attribute
  scsi: aacraid: Avoid -Warray-bounds warning
  scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
  scsi: ufs: core: Update contact email for monitor sysfs nodes
  scsi: scsi_debug: Remove dead code
  scsi: qla2xxx: Use vmalloc_array() and vcalloc()
  scsi: fnic: Use vmalloc_array() and vcalloc()
  scsi: qla2xxx: Fix error code in qla2x00_start_sp()
  scsi: qla2xxx: Silence a static checker warning
  scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()

Merge tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- NVMe pull request via Keith:
      - Don't require quirk to use duplicate namespace identifiers
        (Christoph, Sagi)
      - One more BOGUS_NID quirk (Pankaj)
      - IO timeout and error hanlding fixes for PCI (Keith)
      - Enhanced metadata format mask fix (Ankit)
      - Association race condition fix for fibre channel (Michael)
      - Correct debugfs error checks (Minjie)
      - Use PAGE_SECTORS_SHIFT where needed (Damien)
      - Reduce kernel logs for legacy nguid attribute (Keith)
      - Use correct dma direction when unmapping metadata (Ming)

- Fix for a flush handling regression in this release (Christoph)

- Fix for batched request time stamping (Chengming)

- Fix for a regression in the mq-deadline position calculation (Bart)

- Lockdep fix for blk-crypto (Eric)

- Fix for a regression in the Amiga partition handling changes
   (Michael)

* tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux:
  block: queue data commands from the flush state machine at the head
  blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq
  nvme-pci: fix DMA direction of unmapping integrity data
  nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
  block/mq-deadline: Fix a bug in deadline_from_pos()
  nvme: ensure disabling pairs with unquiesce
  nvme-fc: fix race between error recovery and creating association
  nvme-fc: return non-zero status code when fails to create association
  nvme: fix parameter check in nvme_fault_inject_init()
  nvme: warn only once for legacy uuid attribute
  block: remove dead struc request->completion_data field
  nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
  nvmet: use PAGE_SECTORS_SHIFT
  nvme: add BOGUS_NID quirk for Samsung SM953
  blk-crypto: use dynamic lock class for blk_crypto_profile::lock
  block/partition: fix signedness issue for Amiga partitions

Merge tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux

Pull io_uring fix from Jens Axboe:
"Just a single tweak for the wait logic in io_uring"

* tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux:
io_uring: Use io_schedule* in cqring wait

Merge tag 'riscv-for-linus-6.5-rc2' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- fix a formatting error in the hwprobe documentation

- fix a spurious warning in the RISC-V PMU driver

- fix memory detection on rv32 (problem does not manifest on any known
   system)

- avoid parsing legacy parsing of I in ACPI ISA strings

* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Don't include Zicsr or Zifencei in I from ACPI
  riscv: mm: fix truncation warning on RV32
  perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
  Documentation: RISC-V: hwprobe: Fix a formatting error

Merge tag 'pm-6.5-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix hibernation (after recent changes), frequency QoS and the
  sparc cpufreq driver.

  Specifics:

   - Unbreak the /sys/power/resume interface after recent changes (Azat
     Khuzhin).

   - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
     Yang).

   - Remove __init from cpufreq callbacks in the sparc driver, because
     they may be called after initialization too (Viresh Kumar)"

* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: sparc: Don't mark cpufreq callbacks with __init
  PM: QoS: Restore support for default value on frequency QoS
  PM: hibernate: Fix writing maj:min to /sys/power/resume

Merge branches 'pm-sleep' and 'pm-qos'

Merge a PM QoS fix and a hibernation fix for 6.5-rc2.

- Unbreak the /sys/power/resume interface after recent changes (Azat
   Khuzhin).

- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
   Yang).

* pm-sleep:
  PM: hibernate: Fix writing maj:min to /sys/power/resume

* pm-qos:
  PM: QoS: Restore support for default value on frequency QoS

cifs: fix mid leak during reconnection after timeout threshold

When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.

This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.

This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.

Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.

Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.

Fixes: 8e670f77c4a5 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: is_network_name_deleted should return a bool

Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.

Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"There were a bunch of fixes lined up for 2 weeks, so we have quite a
  few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and
  nouveau makes an appearance.

  So a bit busier than usual for rc2, but nothing seems out of the
  ordinary.

  fbdev:
   - dma: Fix documented default preferred_bpp value

  ttm:
   - fix warning that we shouldn't mix && and ||
   - never consider pinned BOs for eviction&swap
   - Don't leak a resource on eviction error
   - Don't leak a resource on swapout move error
   - fix bulk_move corruption when adding a entry

  client:
   - Send hotplug event after registering a client

  dma-buf:
   - keep the signaling time of merged fences v3
   - fix an error pointer vs NULL bug

  sched:
   - wait for all deps in kill jobs
   - call set fence parent from scheduled

  i915:
   - Don't preserve dpll_hw_state for slave crtc in Bigjoiner
   - Consider OA buffer boundary when zeroing out reports
   - Remove dead code from gen8_pte_encode
   - Fix one wrong caching mode enum usage

  amdgpu:
   - SMU i2c locking fix
   - Fix a possible deadlock in process restoration for ROCm apps
   - Disable PCIe lane/speed switching on Intel platforms (the platforms
     don't support it)

  nouveau:
   - disp: fix HDMI on gt215+
   - disp/g94: enable HDMI
   - acr: Abort loading ACR if no firmware was found
   - bring back blit subchannel for pre nv50 GPUs
   - Fix drm_dp_remove_payload() invocation

  ivpu:
   - Fix VPU register access in irq disable
   - Clear specific interrupt status bits on C0

  bridge:
   - dw_hdmi: fix connector access for scdc
   - ti-sn65dsi86: Fix auxiliary bus lifetime

  panel:
   - simple: Add connector_type for innolux_at043tn24
   - simple: Add Powertip PH800480T013 drm_display_mode flags"

* tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  drm/nouveau: bring back blit subchannel for pre nv50 GPUs
  drm/nouveau/acr: Abort loading ACR if no firmware was found
  drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
  drm/amd: Move helper for dynamic speed switch check out of smu13
  drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13
  drm/amd/pm: share the code around SMU13 pcie parameters update
  drm/amdgpu: avoid restore process run into dead loop.
  drm/amd/pm: fix smu i2c data read risk
  drm/nouveau/disp/g94: enable HDMI
  drm/nouveau/disp: fix HDMI on gt215+
  drm/client: Send hotplug event after registering a client
  drm/i915: Fix one wrong caching mode enum usage
  drm/i915: Remove dead code from gen8_pte_encode
  drm/i915/perf: Consider OA buffer boundary when zeroing out reports
  drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
  drm/ttm: never consider pinned BOs for eviction&swap
  drm/fbdev-dma: Fix documented default preferred_bpp value
  dma-buf: fix an error pointer vs NULL bug
  accel/ivpu: Clear specific interrupt status bits on C0
  accel/ivpu: Fix VPU register access in irq disable
  ...

Merge tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
"A fix to prevent a potential buffer overrun in the messenger, marked
for stable"

* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
libceph: harden msgr2.1 frame segment length checks

block: queue data commands from the flush state machine at the head

We used to insert the data commands following a pre-flush to the head
of the queue until commit 1e82fadfc6b ("blk-mq: do not do head insertions
post-pre-flush commands"). Not doing this seems to cause hangs of
such commands on NFS workloads when exported from file systems with
SATA SSDs. I have no idea why this would starve these workloads,
but doing a semantic revert of this patch (which looks quite different
due to various other changes) fixes the hangs.

Fixes: 1e82fadfc6b ("blk-mq: do not do head insertions post-pre-flush commands")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230714143014.11879-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid()

The ida_alloc_range() function returns negative error codes on error.
On success it returns values in the min to max range (inclusive). It
never returns more then INT_MAX even if "max" is higher. It never
returns values in the 0 to (min - 1) range.

The bug is that "min" is an unsigned int so negative error codes will
be promoted to high positive values errors treated as success.

Fixes: 1a14bf0fc7ed ("iommu/sva: Use GFP_KERNEL for pasid allocation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/6b32095d-7491-4ebb-a850-12e96209eaaf@kili.mountain
Signed-off-by: Joerg Roedel <jroedel@suse.de>

iommu: Fix crash during syfs iommu_groups/N/type

The err_restore_domain flow was accidently inserted into the success path
in commit 1000dccd5d13 ("iommu: Allow IOMMU_RESV_DIRECT to work on
ARM"). It should only happen if iommu_create_device_direct_mappings()
fails. This caused the domains the be wrongly changed and freed whenever
the sysfs is used, resulting in an oops:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 1 PID: 3417 Comm: avocado Not tainted 6.4.0-rc4-next-20230602 #3
  Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021
  RIP: 0010:__iommu_attach_device+0xc/0xa0
  Code: c0 c3 cc cc cc cc 48 89 f0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 48 8b 47 08 <48> 8b 00 48 85 c0 74 74 48 89 f5 e8 64 12 49 00 41 89 c4 85 c0 74
  RSP: 0018:ffffabae0220bd48 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff9ac04f70e410 RCX: 0000000000000001
  RDX: ffff9ac044db20c0 RSI: ffff9ac044fa50d0 RDI: ffff9ac04f70e410
  RBP: ffff9ac044fa50d0 R08: 1000000100209001 R09: 00000000000002dc
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff9ac043d54700
  R13: ffff9ac043d54700 R14: 0000000000000001 R15: 0000000000000001
  FS:  00007f02e30ae000(0000) GS:ffff9afeb2440000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 000000012afca006 CR4: 0000000000770ee0
  PKRU: 55555554
  Call Trace:
   <TASK>
   ? __die+0x24/0x70
   ? page_fault_oops+0x82/0x150
   ? __iommu_queue_command_sync+0x80/0xc0
   ? exc_page_fault+0x69/0x150
   ? asm_exc_page_fault+0x26/0x30
   ? __iommu_attach_device+0xc/0xa0
   ? __iommu_attach_device+0x1c/0xa0
   __iommu_device_set_domain+0x42/0x80
   __iommu_group_set_domain_internal+0x5d/0x160
   iommu_setup_default_domain+0x318/0x400
   iommu_group_store_type+0xb1/0x200
   kernfs_fop_write_iter+0x12f/0x1c0
   vfs_write+0x2a2/0x3b0
   ksys_write+0x63/0xe0
   do_syscall_64+0x3f/0x90
   entry_SYSCALL_64_after_hwframe+0x6e/0xd8
  RIP: 0033:0x7f02e2f14a6f

Reorganize the error flow so that the success branch and error branches
are clearer.

Fixes: 1000dccd5d13 ("iommu: Allow IOMMU_RESV_DIRECT to work on ARM")
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-5bd8cc969d9e+1f1-iommu_set_def_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>

tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails

Fix to record 0-length data to data_loc in fetch_store_string*() if it fails
to get the string data.
Currently those expect that the data_loc is updated by store_trace_args() if
it returns the error code. However, that does not work correctly if the
argument is an array of strings. In that case, store_trace_args() only clears
the first entry of the array (which may have no error) and leaves other
entries. So it should be cleared by fetch_store_string*() itself.
Also, 'dyndata' and 'maxlen' in store_trace_args() should be updated
only if it is used (ret > 0 and argument is a dynamic data.)

Link: https://lore.kernel.org/all/168908496683.123124.4761206188794205601.stgit@devnote2/
Fixes: 40b53b771806 ("tracing: probeevent: Add array type support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Merge tag 'amd-drm-fixes-6.5-2023-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.5-2023-07-12:

amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy)
- Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa)
- Remove dead code from gen8_pte_encode (Tvrtko Ursulin)
- Fix one wrong caching mode enum usage (Tvrtko Ursulin)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk

Merge tag 'drm-misc-fixes-2023-07-13' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

A couple of nouveau patches addressing improving HDMI support and
firmware handling, a fix for TTM to skip pinned BO when evicting, and a
fix for the fbdev documentation.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/nq3ke75juephbex5acfyi5t6bxv22nhmfcpfhru55haj2nv3us@gehrlmjbqgjk

Merge tag 'erofs-for-6.5-rc2-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
"Three patches address regressions related to post-EOF unexpected
  behaviors and fsdax unavailability of chunk-based regular files.

  The other two patches mainly get rid of kmap_atomic() and simplify
  z_erofs_transform_plain().

   - Fix two unexpected loop cases when reading beyond EOF

   - Fix fsdax unavailability for chunk-based regular files

   - Get rid of the remaining kmap_atomic()

   - Minor cleanups"

* tag 'erofs-for-6.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix fsdax unavailability for chunk-based regular files
  erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF
  erofs: avoid useless loops in z_erofs_pcluster_readmore() when reading beyond EOF
  erofs: simplify z_erofs_transform_plain()
  erofs: get rid of the remaining kmap_atomic()

Merge tag 'net-6.5-rc2' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.

  Current release - regressions:

   - netfilter: conntrack: gre: don't set assured flag for clash entries

   - wifi: iwlwifi: remove 'use_tfh' config to fix crash

  Previous releases - regressions:

   - ipv6: fix a potential refcount underflow for idev

   - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
     icmp6_dev()

   - bpf: fix max stack depth check for async callbacks

   - eth: mlx5e:
      - check for NOT_READY flag state after locking
      - fix page_pool page fragment tracking for XDP

   - eth: igc:
      - fix tx hang issue when QBV gate is closed
      - fix corner cases for TSN offload

   - eth: octeontx2-af: Move validation of ptp pointer before its usage

   - eth: ena: fix shift-out-of-bounds in exponential backoff

  Previous releases - always broken:

   - core: prevent skb corruption on frag list segmentation

   - sched:
      - cls_fw: fix improper refcount update leads to use-after-free
      - sch_qfq: account for stab overhead in qfq_enqueue

   - netfilter:
      - report use refcount overflow
      - prevent OOB access in nft_byteorder_eval

   - wifi: mt7921e: fix init command fail with enabled device

   - eth: ocelot: fix oversize frame dropping for preemptible TCs

   - eth: fec: recycle pages for transmitted XDP frames"

* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  selftests: tc-testing: add test for qfq with stab overhead
  net/sched: sch_qfq: account for stab overhead in qfq_enqueue
  selftests: tc-testing: add tests for qfq mtu sanity check
  net/sched: sch_qfq: reintroduce lmax bound check for MTU
  wifi: cfg80211: fix receiving mesh packets without RFC1042 header
  wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
  net: txgbe: fix eeprom calculation error
  net/sched: make psched_mtu() RTNL-less safe
  net: ena: fix shift-out-of-bounds in exponential backoff
  netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
  net/sched: flower: Ensure both minimum and maximum ports are specified
  MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
  docs: netdev: update the URL of the status page
  wifi: iwlwifi: remove 'use_tfh' config to fix crash
  xdp: use trusted arguments in XDP hints kfuncs
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  wifi: airo: avoid uninitialized warning in airo_get_rate()
  octeontx2-pf: Add additional check for MCAM rules
  net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
  net: fec: use netdev_err_once() instead of netdev_err()
  ...

Merge tag 'trace-v6.5-rc1-3' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix some missing-prototype warnings

- Fix user events struct args (did not include size of struct)

   When creating a user event, the "struct" keyword is to denote that
   the size of the field will be passed in. But the parsing failed to
   handle this case.

- Add selftest to struct sizes for user events

- Fix sample code for direct trampolines.

   The sample code for direct trampolines attached to handle_mm_fault().
   But the prototype changed and the direct trampoline sample code was
   not updated. Direct trampolines needs to have the arguments correct
   otherwise it can fail or crash the system.

- Remove unused ftrace_regs_caller_ret() prototype.

- Quiet false positive of FORTIFY_SOURCE

   Due to backward compatibility, the structure used to save stack
   traces in the kernel had a fixed size of 8. This structure is
   exported to user space via the tracing format file. A change was made
   to allow more than 8 functions to be recorded, and user space now
   uses the size field to know how many functions are actually in the
   stack.

   But the structure still has size of 8 (even though it points into the
   ring buffer that has the required amount allocated to hold a full
   stack.

   This was fine until the fortifier noticed that the
   memcpy(&entry->caller, stack, size) was greater than the 8 functions
   and would complain at runtime about it.

   Hide this by using a pointer to the stack location on the ring buffer
   instead of using the address of the entry structure caller field.

- Fix a deadloop in reading trace_pipe that was caused by a mismatch
   between ring_buffer_empty() returning false which then asked to read
   the data, but the read code uses rb_num_of_entries() that returned
   zero, and causing a infinite "retry".

- Fix a warning caused by not using all pages allocated to store ftrace
   functions, where this can happen if the linker inserts a bunch of
   "NULL" entries, causing the accounting of how many pages needed to be
   off.

- Fix histogram synthetic event crashing when the start event is
   removed and the end event is still using a variable from it

- Fix memory leak in freeing iter->temp in tracing_release_pipe()

* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix memory leak of iter->temp when reading trace_pipe
  tracing/histograms: Add histograms to hist_vars if they have referenced variables
  tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
  ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
  ring-buffer: Fix deadloop issue on reading trace_pipe
  tracing: arm64: Avoid missing-prototype warnings
  selftests/user_events: Test struct size match cases
  tracing/user_events: Fix struct arg size match check
  x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
  arm64: ftrace: Add direct call trampoline samples support
  samples: ftrace: Save required argument registers in sample trampolines

Merge tag 'for-linus-6.5-rc2-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- a cleanup of the Xen related ELF-notes

- a fix for virtio handling in Xen dom0 when running Xen in a VM

* tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent
x86/Xen: tidy xen-head.S

Merge tag 'sh-for-v6.5-tag2' of git://git./linux/kernel/git/glaubitz/sh-linux

Pull sh fixes from John Paul Adrian Glaubitz:
"The sh updates introduced multiple regressions.

  In particular, the change a8ac2961148e ("sh: Avoid using IRQ0 on SH3
  and SH4") causes several boards to hang during boot due to incorrect
  IRQ numbers.

  Geert Uytterhoeven has contributed patches that handle the virq offset
  in the IRQ code for the dreamcast, highlander and r2d boards while
  Artur Rojek has contributed a patch which handles the virq offset for
  the hd64461 companion chip"

* tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
  sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
  sh: mach-highlander: Handle virq offset in cascaded IRL demux
  sh: mach-r2d: Handle virq offset in cascaded IRL demux

Merge tag 'nvme-6.5-2023-07-13' of git://git.infradead.org/nvme into block-6.5

Pull NVMe fixes from Keith:

"nvme fixes for Linux 6.5

- Don't require quirk to use duplicate namespace identifiers
   (Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)"

* tag 'nvme-6.5-2023-07-13' of git://git.infradead.org/nvme:
  nvme-pci: fix DMA direction of unmapping integrity data
  nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
  nvme: ensure disabling pairs with unquiesce
  nvme-fc: fix race between error recovery and creating association
  nvme-fc: return non-zero status code when fails to create association
  nvme: fix parameter check in nvme_fault_inject_init()
  nvme: warn only once for legacy uuid attribute
  nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
  nvmet: use PAGE_SECTORS_SHIFT
  nvme: add BOGUS_NID quirk for Samsung SM953

blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq

The iocost rely on rq start_time_ns and alloc_time_ns to tell saturation
state of the block device. Most of the time request is allocated after
rq_qos_throttle() and its alloc_time_ns or start_time_ns won't be affected.

But for plug batched allocation introduced by the commit 47c122e35d7e
("block: pre-allocate requests if plug is started and is a batch"), we can
rq_qos_throttle() after the allocation of the request. This is what the
blk_mq_get_cached_request() does.

In this case, the cached request alloc_time_ns or start_time_ns is much
ahead if blocked in any qos ->throttle().

Fix it by setting alloc_time_ns and start_time_ns to now when the allocated
request is actually used.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230710105516.2053478-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sparc: mark __arch_xchg() as __always_inline

An otherwise correct change to the atomic operations uncovered an
existing bug in the sparc __arch_xchg() function, which is calls
__xchg_called_with_bad_pointer() when its arguments are unknown at
compile time:

ERROR: modpost: "__xchg_called_with_bad_pointer" [lib/atomic64_test.ko] undefined!

This now happens because gcc determines that it's better to not inline the
function. Avoid this by just marking the function as __always_inline
to force the compiler to do the right thing here.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/c525adc9-6623-4660-8718-e0c9311563b8@roeck-us.net/
Fixes: d12157efc8e08 ("locking/atomic: make atomic*_{cmp,}xchg optional")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230628094938.2318171-1-arnd@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

MAINTAINERS: Foolishly claim maintainership of string routines

Since the string API is tightly coupled with FORTIFY_SOURCE, I am
offering myself up as maintainer for it. Thankfully Andy is already a
reviewer and can keep me on the straight and narrow.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230712194625.never.252-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

Revert "tracing: Add "(fault)" name injection to kernel probes"

This reverts commit 2e9906f84fc7c99388bb7123ade167250d50f1c0.

It was turned out that commit 2e9906f84fc7 ("tracing: Add "(fault)"
name injection to kernel probes") did not work correctly and probe
events still show just '(fault)' (instead of '"(fault)"'). Also,
current '(fault)' is more explicit that it faulted.

This also moves FAULT_STRING macro to trace.h so that synthetic
event can keep using it, and uses it in trace_probe.c too.

Link: https://lore.kernel.org/all/168908495772.123124.1250788051922100079.stgit@devnote2/
Link: https://lore.kernel.org/all/20230706230642.3793a593@rorschach.local.home/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/probes: Fix to update dynamic data counter if fetcharg uses it

Fix to update dynamic data counter ('dyndata') and max length ('maxlen')
only if the fetcharg uses the dynamic data. Also get out arg->dynamic
from unlikely(). This makes dynamic data address wrong if
process_fetch_insn() returns error on !arg->dynamic case.

Link: https://lore.kernel.org/all/168908494781.123124.8160245359962103684.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20230710233400.5aaf024e@gandalf.local.home/
Fixes: 9178412ddf5a ("tracing: probeevent: Return consumed bytes of dynamic area")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/probes: Fix not to count error code to total length

Fix not to count the error code (which is minus value) to the total
used length of array, because it can mess up the return code of
process_fetch_insn_bottom(). Also clear the 'ret' value because it
will be used for calculating next data_loc entry.

Link: https://lore.kernel.org/all/168908493827.123124.2175257289106364229.stgit@devnote2/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/8819b154-2ba1-43c3-98a2-cbde20892023@moroto.mountain/
Fixes: 9b960a38835f ("tracing: probeevent: Unify fetch_insn processing common part")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/probes: Fix to avoid double count of the string length on the array

If an array is specified with the ustring or symstr, the length of the
strings are accumlated on both of 'ret' and 'total', which means the
length is double counted.
Just set the length to the 'ret' value for avoiding double counting.

Link: https://lore.kernel.org/all/168908492917.123124.15076463491122036025.stgit@devnote2/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/8819b154-2ba1-43c3-98a2-cbde20892023@moroto.mountain/
Fixes: 88903c464321 ("tracing/probe: Add ustring type for user-space string")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running

Add a comment the reason why fprobe_kprobe_handler() exits if any other
kprobe is running.

Link: https://lore.kernel.org/all/168874788299.159442.2485957441413653858.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20230706120916.3c6abf15@gandalf.local.home/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

nvme-pci: fix DMA direction of unmapping integrity data

DMA direction should be taken in dma_unmap_page() for unmapping integrity
data.

Fix this DMA direction, and reported in Guangwu's test.

Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 4aedb705437f ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices

While duplicate IDs are still very harmful, including the potential to easily
see changing devices in /dev/disk/by-id, it turn out they are extremely
common for cheap end user NVMe devices.

Relax our check for them for so that it doesn't reject the probe on
single-ported PCIe devices, but prints a big warning instead. In doubt
we'd still like to see quirk entries to disable the potential for
changing supposed stable device identifier links, but this will at least
allow users how have two (or more) of these devices to use them without
having to manually add a new PCI ID entry with the quirk through sysfs or
by patching the kernel.

Fixes: 2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique")
Cc: stable@vger.kernel.org # 6.0+
Co-developed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

tracing: Fix memory leak of iter->temp when reading trace_pipe

kmemleak reports:
  unreferenced object 0xffff88814d14e200 (size 256):
    comm "cat", pid 336, jiffies 4294871818 (age 779.490s)
    hex dump (first 32 bytes):
      04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00  ................
      0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff  .........Z......
    backtrace:
      [<ffffffff9bdff18f>] __kmalloc+0x4f/0x140
      [<ffffffff9bc9238b>] trace_find_next_entry+0xbb/0x1d0
      [<ffffffff9bc9caef>] trace_print_lat_context+0xaf/0x4e0
      [<ffffffff9bc94490>] print_trace_line+0x3e0/0x950
      [<ffffffff9bc95499>] tracing_read_pipe+0x2d9/0x5a0
      [<ffffffff9bf03a43>] vfs_read+0x143/0x520
      [<ffffffff9bf04c2d>] ksys_read+0xbd/0x160
      [<ffffffff9d0f0edf>] do_syscall_64+0x3f/0x90
      [<ffffffff9d2000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8

when reading file 'trace_pipe', 'iter->temp' is allocated or relocated
in trace_find_next_entry() but not freed before 'trace_pipe' is closed.

To fix it, free 'iter->temp' in tracing_release_pipe().

Link: https://lore.kernel.org/linux-trace-kernel/20230713141435.1133021-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: ff895103a84ab ("tracing: Save off entry when peeking at next entry")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

libceph: harden msgr2.1 frame segment length checks

ceph_frame_desc::fd_lens is an int array. decode_preamble() thus
effectively casts u32 -> int but the checks for segment lengths are
written as if on unsigned values. While reading in HELLO or one of the
AUTH frames (before authentication is completed), arithmetic in
head_onwire_len() can get duped by negative ctrl_len and produce
head_len which is less than CEPH_PREAMBLE_LEN but still positive.
This would lead to a buffer overrun in prepare_read_control() as the
preamble gets copied to the newly allocated buffer of size head_len.

Cc: stable@vger.kernel.org
Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Thelford Williams <thelford@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>

Merge branch 'net-sched-fixes-for-sch_qfq'

Pedro Tammela says:

====================
net/sched: fixes for sch_qfq

Patch 1 fixes a regression introduced in 6.4 where the MTU size could be
bigger than 'lmax'.

Patch 3 fixes an issue where the code doesn't account for qdisc_pkt_len()
returning a size bigger then 'lmax'.

Patches 2 and 4 are selftests for the issues above.
====================

Link: https://lore.kernel.org/r/20230711210103.597831-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: tc-testing: add test for qfq with stab overhead

A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped
by the QFQ qdisc as it can't handle such lengths.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_qfq: account for stab overhead in qfq_enqueue

Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.

Consider the following code in net/sched/sch_qfq.c:

static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
                struct sk_buff **to_free)
{
     unsigned int len = qdisc_pkt_len(skb), gso_segs;

    // ...

     if (unlikely(cl->agg->lmax < len)) {
         pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
              cl->agg->lmax, len, cl->common.classid);
         err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
         if (err) {
             cl->qstats.drops++;
             return qdisc_drop(skb, sch, to_free);
         }

    // ...

     }

Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.

This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.

A user may choose virtually any size using such a table.

As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------

We can create the issue with the following commands:

tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2

This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.

Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: tc-testing: add tests for qfq mtu sanity check

QFQ only supports a certain bound of MTU size so make sure
we check for this requirement in the tests.

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_qfq: reintroduce lmax bound check for MTU

25369891fcef deletes a check for the case where no 'lmax' is
specified which 3037933448f6 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.

Fixes: 25369891fcef ("net/sched: sch_qfq: refactor parsing of netlink parameters")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ

A recent change to start counting SuperH IRQ #s from 16 breaks support
for the Hitachi HD64461 companion chip.

Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
accommodate for the new virq numbering rules.

Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux

Take into account the virq offset when translating cascaded interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/7d0cb246c9f1cd24bb1f637ec5cb67e799a4c3b8.1688908227.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-highlander: Handle virq offset in cascaded IRL demux

Take into account the virq offset when translating cascaded IRL
interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4fcb0d08a2b372431c41e04312742dc9e41e1be4.1688908186.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-r2d: Handle virq offset in cascaded IRL demux

When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to
an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL
interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon
Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does
not take into account the new virq offset, the interrupt is no longer
translated, leading to an unhandled interrupt.

Fix this by taking into account the virq offset when translating
cascaded IRL interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

smb: client: fix missed ses refcounting

Use new cifs_smb_ses_inc_refcount() helper to get an active reference
of @ses and @ses->dfs_root_ses (if set). This will prevent
@ses->dfs_root_ses of being put in the next call to cifs_put_smb_ses()
and thus potentially causing an use-after-free bug.

Fixes: 8e3554150d6c ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb: client: Fix -Wstringop-overflow issues

pSMB->hdr.Protocol is an array of size 4 bytes, hence when the compiler
analyzes this line of code

parm_data = ((char *) &pSMB->hdr.Protocol) + offset;

it legitimately complains about the fact that offset points outside the
bounds of the array. Notice that the compiler gives priority to the object
as an array, rather than merely the address of one more byte in a structure
to wich offset should be added (which seems to be the actual intention of
the original implementation).

Fix this by explicitly instructing the compiler to treat the code as a
sequence of bytes in struct smb_com_transaction2_spi_req, and not as an
array accessed through pointer notation.

Notice that ((char *)pSMB) + sizeof(pSMB->hdr.smb_buf_length) points to
the same address as ((char *) &pSMB->hdr.Protocol), therefore this results
in no differences in binary output.

Fixes the following -Wstringop-overflow warnings when built s390
architecture with defconfig (GCC 13):
  CC [M]  fs/smb/client/cifssmb.o
In function 'cifs_init_ace',
    inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
    inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2987:31: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2987 |         cifs_ace->cifs_e_perm = local_ace->e_perm;
      |         ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
In file included from fs/smb/client/cifssmb.c:27:
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [7, 11] into destination object 'Protocol' of size 4
  384 |         __u8 Protocol[4];
      |              ^~~~~~~~
In function 'cifs_init_ace',
    inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
    inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2988:30: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2988 |         cifs_ace->cifs_e_tag =  local_ace->e_tag;
      |         ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [6, 10] into destination object 'Protocol' of size 4
  384 |         __u8 Protocol[4];
      |              ^~~~~~~~

This helps with the ongoing efforts to globally enable
-Wstringop-overflow.

Link: https://github.com/KSPP/linux/issues/310
Fixes: dc1af4c4b472 ("cifs: implement set acl method")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2023-07-12

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 7 files changed, 93 insertions(+), 28 deletions(-).

The main changes are:

1) Fix max stack depth check for async callbacks, from Kumar.

2) Fix inconsistent JIT image generation, from Björn.

3) Use trusted arguments in XDP hints kfuncs, from Larysa.

4) Fix memory leak in cpu_map_update_elem, from Pu.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  xdp: use trusted arguments in XDP hints kfuncs
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  riscv, bpf: Fix inconsistent JIT image generation
  selftests/bpf: Add selftest for check_stack_max_depth bug
  bpf: Fix max stack depth check for async callbacks
====================

Link: https://lore.kernel.org/r/20230712223045.40182-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: cfg80211: fix receiving mesh packets without RFC1042 header

Fix ethernet header length field after stripping the mesh header

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CT5GNZSK28AI.2K6M69OXM9RW5@syracuse/
Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Reported-and-tested-by: Nicolas Escande <nico.escande@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230711115052.68430-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()

If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c
should return negative error code instead of a positive value count.
Fix this bug by returning correct error code.

Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/tencent_AD09A61BC4DA92AD1EB0790F5C850E544D07@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: txgbe: fix eeprom calculation error

For some device types like TXGBE_ID_XAUI, *checksum computed in
txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the
limit on the size of *checksum.

Fixes: 049fe5365324 ("net: txgbe: Add operations to interact with firmware")
Fixes: 5e2ea7801fac ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-linus' of https://github.com/openrisc/linux

Pull OpenRISC fix from Stafford Horne:

- During the 6.4 cycle my fpu support work broke ABI compatibility in
   the sigcontext struct. This was noticed by musl libc developers after
   the release. This fix restores the ABI.

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI

tracing/histograms: Add histograms to hist_vars if they have referenced variables

Hist triggers can have referenced variables without having direct
variables fields. This can be the case if referenced variables are added
for trigger actions. In this case the newly added references will not
have field variables. Not taking such referenced variables into
consideration can result in a bug where it would be possible to remove
hist trigger with variables being refenced. This will result in a bug
that is easily reproducable like so

$ cd /sys/kernel/tracing
$ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events
$ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger
$ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger
$ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger

[  100.263533] ==================================================================
[  100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180
[  100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439
[  100.266320]
[  100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4
[  100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[  100.268561] Call Trace:
[  100.268902]  <TASK>
[  100.269189]  dump_stack_lvl+0x4c/0x70
[  100.269680]  print_report+0xc5/0x600
[  100.270165]  ? resolve_var_refs+0xc7/0x180
[  100.270697]  ? kasan_complete_mode_report_info+0x80/0x1f0
[  100.271389]  ? resolve_var_refs+0xc7/0x180
[  100.271913]  kasan_report+0xbd/0x100
[  100.272380]  ? resolve_var_refs+0xc7/0x180
[  100.272920]  __asan_load8+0x71/0xa0
[  100.273377]  resolve_var_refs+0xc7/0x180
[  100.273888]  event_hist_trigger+0x749/0x860
[  100.274505]  ? kasan_save_stack+0x2a/0x50
[  100.275024]  ? kasan_set_track+0x29/0x40
[  100.275536]  ? __pfx_event_hist_trigger+0x10/0x10
[  100.276138]  ? ksys_write+0xd1/0x170
[  100.276607]  ? do_syscall_64+0x3c/0x90
[  100.277099]  ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  100.277771]  ? destroy_hist_data+0x446/0x470
[  100.278324]  ? event_hist_trigger_parse+0xa6c/0x3860
[  100.278962]  ? __pfx_event_hist_trigger_parse+0x10/0x10
[  100.279627]  ? __kasan_check_write+0x18/0x20
[  100.280177]  ? mutex_unlock+0x85/0xd0
[  100.280660]  ? __pfx_mutex_unlock+0x10/0x10
[  100.281200]  ? kfree+0x7b/0x120
[  100.281619]  ? ____kasan_slab_free+0x15d/0x1d0
[  100.282197]  ? event_trigger_write+0xac/0x100
[  100.282764]  ? __kasan_slab_free+0x16/0x20
[  100.283293]  ? __kmem_cache_free+0x153/0x2f0
[  100.283844]  ? sched_mm_cid_remote_clear+0xb1/0x250
[  100.284550]  ? __pfx_sched_mm_cid_remote_clear+0x10/0x10
[  100.285221]  ? event_trigger_write+0xbc/0x100
[  100.285781]  ? __kasan_check_read+0x15/0x20
[  100.286321]  ? __bitmap_weight+0x66/0xa0
[  100.286833]  ? _find_next_bit+0x46/0xe0
[  100.287334]  ? task_mm_cid_work+0x37f/0x450
[  100.287872]  event_triggers_call+0x84/0x150
[  100.288408]  trace_event_buffer_commit+0x339/0x430
[  100.289073]  ? ring_buffer_event_data+0x3f/0x60
[  100.292189]  trace_event_raw_event_sys_enter+0x8b/0xe0
[  100.295434]  syscall_trace_enter.constprop.0+0x18f/0x1b0
[  100.298653]  syscall_enter_from_user_mode+0x32/0x40
[  100.301808]  do_syscall_64+0x1a/0x90
[  100.304748]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  100.307775] RIP: 0033:0x7f686c75c1cb
[  100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48
[  100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021
[  100.321200] RAX: ffffffffffffffda RBX: 000055f566469ea0 RCX: 00007f686c75c1cb
[  100.324631] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 000000000000000a
[  100.328104] RBP: 00007ffc60137ac0 R08: 00007f686c818460 R09: 000000000000000a
[  100.331509] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009
[  100.334992] R13: 0000000000000007 R14: 000000000000000a R15: 0000000000000007
[  100.338381]  </TASK>

We hit the bug because when second hist trigger has was created
has_hist_vars() returned false because hist trigger did not have
variables. As a result of that save_hist_vars() was not called to add
the trigger to trace_array->hist_vars. Later on when we attempted to
remove the first histogram find_any_var_ref() failed to detect it is
being used because it did not find the second trigger in hist_vars list.

With this change we wait until trigger actions are created so we can take
into consideration if hist trigger has variable references. Also, now we
check the return value of save_hist_vars() and fail trigger creation if
save_hist_vars() fails.

Link: https://lore.kernel.org/linux-trace-kernel/20230712223021.636335-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

net/sched: make psched_mtu() RTNL-less safe

Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------

Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.

[1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/

v1 -> v2: Fix commit message

Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: fix shift-out-of-bounds in exponential backoff

The ENA adapters on our instances occasionally reset.  Once recently
logged a UBSAN failure to console in the process:

  UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13
  shift exponent 32 is too large for 32-bit type 'unsigned int'
  CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117
  Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017
  Workqueue: ena ena_fw_reset_device [ena]
  Call Trace:
  <TASK>
  dump_stack_lvl+0x4a/0x63
  dump_stack+0x10/0x16
  ubsan_epilogue+0x9/0x36
  __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
  ? __const_udelay+0x43/0x50
  ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena]
  wait_for_reset_state+0x54/0xa0 [ena]
  ena_com_dev_reset+0xc8/0x110 [ena]
  ena_down+0x3fe/0x480 [ena]
  ena_destroy_device+0xeb/0xf0 [ena]
  ena_fw_reset_device+0x30/0x50 [ena]
  process_one_work+0x22b/0x3d0
  worker_thread+0x4d/0x3f0
  ? process_one_work+0x3d0/0x3d0
  kthread+0x12a/0x150
  ? set_kthread_struct+0x50/0x50
  ret_from_fork+0x22/0x30
  </TASK>

Apparently, the reset delays are getting so large they can trigger a
UBSAN panic.

Looking at the code, the current timeout is capped at 5000us.  Using a
base value of 100us, the current code will overflow after (1<<29).  Even
at values before 32, this function wraps around, perhaps
unintentionally.

Cap the value of the exponent used for this backoff at (1<<16) which is
larger than currently necessary, but large enough to support bigger
values in the future.

Cc: stable@vger.kernel.org
Fixes: 4bb7f4cf60e3 ("net: ena: reduce driver load time")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20230711013621.GE1926@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

kallsyms: strip LTO-only suffixes from promoted global functions

Commit 6eb4bd92c1ce ("kallsyms: strip LTO suffixes from static functions")
stripped all function/variable suffixes started with '.' regardless
of whether those suffixes are generated at LTO mode or not. In fact,
as far as I know, in LTO mode, when a static function/variable is
promoted to the global scope, '.llvm.<...>' suffix is added.

The existing mechanism breaks live patch for a LTO kernel even if
no <symbol>.llvm.<...> symbols are involved. For example, for the following
kernel symbols:
  $ grep bpf_verifier_vlog /proc/kallsyms
  ffffffff81549f60 t bpf_verifier_vlog
  ffffffff8268b430 d bpf_verifier_vlog._entry
  ffffffff8282a958 d bpf_verifier_vlog._entry_ptr
  ffffffff82e12a1f d bpf_verifier_vlog.__already_done
'bpf_verifier_vlog' is a static function. '_entry', '_entry_ptr' and
'__already_done' are static variables used inside 'bpf_verifier_vlog',
so llvm promotes them to file-level static with prefix 'bpf_verifier_vlog.'.
Note that the func-level to file-level static function promotion also
happens without LTO.

Given a symbol name 'bpf_verifier_vlog', with LTO kernel, current mechanism will
return 4 symbols to live patch subsystem which current live patching
subsystem cannot handle it. With non-LTO kernel, only one symbol
is returned.

In [1], we have a lengthy discussion, the suggestion is to separate two
cases:
  (1). new symbols with suffix which are generated regardless of whether
       LTO is enabled or not, and
  (2). new symbols with suffix generated only when LTO is enabled.

The cleanup_symbol_name() should only remove suffixes for case (2).
Case (1) should not be changed so it can work uniformly with or without LTO.

This patch removed LTO-only suffix '.llvm.<...>' so live patching and
tracing should work the same way for non-LTO kernel.
The cleanup_symbol_name() in scripts/kallsyms.c is also changed to have the same
filtering pattern so both kernel and kallsyms tool have the same
expectation on the order of symbols.

[1] https://lore.kernel.org/live-patching/20230615170048.2382735-1-song@kernel.org/T/#u

Fixes: 6eb4bd92c1ce ("kallsyms: strip LTO suffixes from static functions")
Reported-by: Song Liu <song@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628181926.4102448-1-yhs@fb.com
Signed-off-by: Kees Cook <keescook@chromium.org>

Merge tag 'renesas-pinctrl-fixes-for-v6.5-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into fixes

pinctrl: renesas: Fixes for v6.5

- Fix handling of non-unique pin control configuration subnode names
on the RZ/V2M and RZ/G2L SoC families.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Unify debounce handling into amd_pinconf_set()

Debounce handling is done in two different entry points in the driver.
Unify this to make sure that it's always handled the same.

Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-5-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Drop pull up select configuration

pinctrl-amd currently tries to program bit 19 of all GPIOs to select
either a 4kΩ or 8hΩ pull up, but this isn't what bit 19 does. Bit
19 is marked as reserved, even in the latest platforms documentation.

Drop this programming functionality.

Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-4-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Use amd_pinconf_set() for all config options

On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm. This issue doesn't happen on
Windows.

Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.

```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0007
}
```

On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.

To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.

Reported-by: Nik P <npliashechnikov@gmail.com>
Reported-by: Nathan Schulte <nmschulte@gmail.com>
Reported-by: Friedrich Vock <friedrich.vock@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Only use special debounce behavior for GPIO 0

It's uncommon to use debounce on any other pin, but technically
we should only set debounce to 0 when working off GPIO0.

Cc: stable@vger.kernel.org
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 968ab9261627 ("pinctrl: amd: Detect internal GPIO0 debounce handling")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

tracing: Stop FORTIFY_SOURCE complaining about stack trace caller

The stack_trace event is an event created by the tracing subsystem to
store stack traces. It originally just contained a hard coded array of 8
words to hold the stack, and a "size" to know how many entries are there.
This is exported to user space as:

name: kernel_stack
ID: 4
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;

field:int size; offset:8; size:4; signed:1;
field:unsigned long caller[8]; offset:16; size:64; signed:0;

print fmt: "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n",i
(void *)REC->caller[0], (void *)REC->caller[1], (void *)REC->caller[2],
(void *)REC->caller[3], (void *)REC->caller[4], (void *)REC->caller[5],
(void *)REC->caller[6], (void *)REC->caller[7]

Where the user space tracers could parse the stack. The library was
updated for this specific event to only look at the size, and not the
array. But some older users still look at the array (note, the older code
still checks to make sure the array fits inside the event that it read.
That is, if only 4 words were saved, the parser would not read the fifth
word because it will see that it was outside of the event size).

This event was changed a while ago to be more dynamic, and would save a
full stack even if it was greater than 8 words. It does this by simply
allocating more ring buffer to hold the extra words. Then it copies in the
stack via:

memcpy(&entry->caller, fstack->calls, size);

As the entry is struct stack_entry, that is created by a macro to both
create the structure and export this to user space, it still had the caller
field of entry defined as: unsigned long caller[8].

When the stack is greater than 8, the FORTIFY_SOURCE code notices that the
amount being copied is greater than the source array and complains about
it. It has no idea that the source is pointing to the ring buffer with the
required allocation.

To hide this from the FORTIFY_SOURCE logic, pointer arithmetic is used:

ptr = ring_buffer_event_data(event);
entry = ptr;
ptr += offsetof(typeof(*entry), caller);
memcpy(ptr, fstack->calls, size);

Link: https://lore.kernel.org/all/20230612160748.4082850-1-svens@linux.ibm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230712105235.5fc441aa@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()

As comments in ftrace_process_locs(), there may be NULL pointers in
mcount_loc section:
> Some architecture linkers will pad between
> the different mcount_loc sections of different
> object files to satisfy alignments.
> Skip any NULL pointers.

After commit 20e5227e9f55 ("ftrace: allow NULL pointers in mcount_loc"),
NULL pointers will be accounted when allocating ftrace pages but skipped
before adding into ftrace pages, this may result in some pages not being
used. Then after commit 706c81f87f84 ("ftrace: Remove extra helper
functions"), warning may occur at:
WARN_ON(pg->next);

To fix it, only warn for case that no pointers skipped but pages not used
up, then free those unused pages after releasing ftrace_lock.

Link: https://lore.kernel.org/linux-trace-kernel/20230712060452.3175675-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 706c81f87f84 ("ftrace: Remove extra helper functions")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

drm/nouveau: bring back blit subchannel for pre nv50 GPUs

1ba6113a90a0 removed a lot of the kernel GPU channel, but method 0x128
was important as otherwise the GPU spams us with `CACHE_ERROR` messages.

We use the blit subchannel inside our vblank handling, so we should keep
at least this part.

v2: Only do it for NV11+ GPUs

Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/201
Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526091052.2169044-1-kherbst@redhat.com

drm/nouveau/acr: Abort loading ACR if no firmware was found

This fixes a NULL pointer access inside nvkm_acr_oneinit in case necessary
firmware files couldn't be loaded.

Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/212
Fixes: 4b569ded09fd ("drm/nouveau/acr/ga102: initial support")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230522201838.1496622-1-kherbst@redhat.com

netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()

The simple_write_to_buffer() function is designed to handle partial
writes.  It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied.  This code doesn't check the
return properly.  We only know that the first byte is written, the rest
of the buffer might be uninitialized.

There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function.  Just use memdup_user() and copy the whole
buffer.

Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'platform-drivers-x86-v6.5-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"

* tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
  platform/x86: dell-ddv: Fix mangled list in documentation
  platform/x86: dell-ddv: Improve error handling
  platform/x86/amd: pmf: Add new ACPI ID AMDI0103
  platform/x86/amd: pmc: Add new ACPI ID AMDI000A
  platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
  platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
  platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
  platform/x86/intel/tpmi: Prevent overflow for cap_offset
  platform/x86: wmi: Replace open coded guid_parse_and_compare()
  platform/x86: wmi: Break possible infinite loop when parsing GUID

Merge tag 'probes-fixes-v6.5-rc1' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

- Fix fprobe's rethook release issues:

     - Release rethook after ftrace_ops is unregistered so that the
       rethook is not accessed after free.

     - Stop rethook before ftrace_ops is unregistered so that the
       rethook is NOT used after exiting unregister_fprobe()

- Fix eprobe cleanup logic. If it attaches to multiple events and
   failes to enable one of them, rollback all enabled events correctly.

- Fix fprobe to unlock ftrace recursion lock correctly when it missed
   by another running kprobe.

- Cleanup kprobe to remove unnecessary NULL.

- Cleanup kprobe to remove unnecessary 0 initializations.

* tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free()
  kernel: kprobes: Remove unnecessary ‘0’ values
  kprobes: Remove unnecessary ‘NULL’ values from correct_ret_addr
  fprobe: add unlock to match a succeeded ftrace_test_recursion_trylock
  kernel/trace: Fix cleanup logic of enable_trace_eprobe
  fprobe: Release rethook after the ftrace_ops is unregistered

Merge tag 'for-linus-2023071101' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

- AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)

- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
   Bergmann)

- a quick HID kselftests script fix for our CI to be happy (Benjamin
   Tissoires)

- various fixes and additions of device IDs

* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: amd_sfh: Fix for shift-out-of-bounds
  HID: amd_sfh: Rename the float32 variable
  HID: input: fix mapping for camera access keys
  HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
  HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
  HID: hyperv: avoid struct memcpy overrun warning
  selftests: hid: fix vmtests.sh not running make headers

block/mq-deadline: Fix a bug in deadline_from_pos()

A bug was introduced in deadline_from_pos() while implementing the
suggestion to use round_down() in the following code:

pos -= bdev_offset_from_zone_start(rq->q->disk->part0, pos);

This patch makes deadline_from_pos() use round_down() such that 'pos' is
rounded down.

Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/5zthzi3lppvcdp4nemum6qck4gpqbdhvgy4k3qwguhgzxc4quj@amulvgycq67h/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes: 0effb390c4ba ("block: mq-deadline: Handle requeued requests correctly")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230712173344.2994513-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

RISC-V: Don't include Zicsr or Zifencei in I from ACPI

ACPI ISA strings are based on a specification after Zicsr and Zifencei
were split out of I, so we shouldn't be treating them as part of I. We
haven't release an ACPI-based kernel yet, so we don't need to worry
about compatibility with the old ISA strings.

Fixes: 07edc32779e3 ("RISC-V: always report presence of extensions formerly part of the base ISA")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230711224600.10879-1-palmer@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

nvme: ensure disabling pairs with unquiesce

If any error handling that disables the controller fails to queue the
reset work, like if the state changed to disconnected inbetween, then
the failed teardown needs to unquiesce the queues since it's no longer
paired with reset_work. Just make sure that the controller can be put
into a resetting state prior to starting the disable so that no other
handling can change the queue states while recovery is happening.

Reported-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme-fc: fix race between error recovery and creating association

There is a small race window between nvme-fc association creation and error
recovery. Fix this race condition by protecting accessing to controller
state and ASSOC_FAILED flag under nvme-fc controller lock.

Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme-fc: return non-zero status code when fails to create association

Return non-zero status code(-EIO) when needed, so re-connecting or
deleting controller will be triggered properly.

Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13

SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced80479 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

ring-buffer: Fix deadloop issue on reading trace_pipe

Soft lockup occurs when reading file 'trace_pipe':

  watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488]
  [...]
  RIP: 0010:ring_buffer_empty_cpu+0xed/0x170
  RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246
  RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb
  RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218
  RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f
  R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901
  R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000
  [...]
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   __find_next_entry+0x1a8/0x4b0
   ? peek_next_entry+0x250/0x250
   ? down_write+0xa5/0x120
   ? down_write_killable+0x130/0x130
   trace_find_next_entry_inc+0x3b/0x1d0
   tracing_read_pipe+0x423/0xae0
   ? tracing_splice_read_pipe+0xcb0/0xcb0
   vfs_read+0x16b/0x490
   ksys_read+0x105/0x210
   ? __ia32_sys_pwrite64+0x200/0x200
   ? switch_fpu_return+0x108/0x220
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x61/0xc6

Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:

  tracing_read_pipe() {
    ... ...
    waitagain:
      tracing_wait_pipe() // 1. find non-empty buffer here
      trace_find_next_entry_inc()  // 2. loop here try to find an entry
        __find_next_entry()
          ring_buffer_empty_cpu();  // 3. find non-empty buffer
          peek_next_entry()  // 4. but peek always return NULL
            ring_buffer_peek()
              rb_buffer_peek()
                rb_get_reader_page()
                  // 5. because rb_num_of_entries() == 0 always true here
                  //    then return NULL
      // 6. user buffer not been filled so goto 'waitgain'
      //    and eventually leads to an deadloop in kernel!!!
  }

By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.

To fix it, we need to clear every pages in rb_reset_cpu().

Link: https://lore.kernel.org/linux-trace-kernel/20230708225144.3785600-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: a5fb833172eca ("ring-buffer: Fix uninitialized read_stamp")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

drm/amd: Move helper for dynamic speed switch check out of smu13

This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13

Intel platforms such as Sapphire Rapids and Raptor Lake don't support
dynamic pcie lane or speed switching.

This limitation seems to carry over from one generation to another.
To be safer, disable dynamic pcie lane width and speed switching when
running on an Intel platform.

Link: https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/005/pci-express-support/
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2663
Co-developed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amd/pm: share the code around SMU13 pcie parameters update

So that SMU13.0.0 and SMU13.0.7 do not need to have one copy each.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amdgpu: avoid restore process run into dead loop.

In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.

Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: fix smu i2c data read risk

the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).

it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

tracing: arm64: Avoid missing-prototype warnings

These are all tracing W=1 warnings in arm64 allmodconfig about missing
prototypes:

kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro
totypes]
kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes]
arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes]

Move the declarations to an appropriate header where they can be seen
by the caller and callee, and make sure the headers are included where
needed.

Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
[ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

selftests/user_events: Test struct size match cases

The self tests for user_events currently does not ensure that the edge
case for struct types work properly with size differences.

Add cases for mis-matching struct names and sizes to ensure they work
properly.

Link: https://lkml.kernel.org/r/20230629235049.581-3-beaub@linux.microsoft.com
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

nvme: fix parameter check in nvme_fault_inject_init()

Make IS_ERR() judge the debugfs_create_dir() function return.

Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme: warn only once for legacy uuid attribute

Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.

Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

drm/nouveau/disp/g94: enable HDMI

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630160645.3984596-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>

drm/nouveau/disp: fix HDMI on gt215+

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628212248.3798605-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>

riscv: mm: fix truncation warning on RV32

lkp reports below sparse warning when building for RV32:
arch/riscv/mm/init.c:1204:48: sparse: warning: cast truncates bits from
constant value (100000000 becomes 0)

IMO, the reason we didn't see this truncates bug in real world is "0"
means MEMBLOCK_ALLOC_ACCESSIBLE in memblock and there's no RV32 HW
with more than 4GB memory.

Fix it anyway to make sparse happy.

Fixes: decf89f86ecd ("riscv: try to allocate crashkern region from 32bit addressible memory")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306080034.SLiCiOMn-lkp@intel.com/
Link: https://lore.kernel.org/r/20230709171036.1906-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()

Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the
perf_sample_event_took() function was added to report time spent in
overflow interrupts. If the interrupt takes too long, the perf framework
will lower the sysctl_perf_event_sample_rate and max_samples_per_tick.
When hwc->interrupts is larger than max_samples_per_tick, the
hwc->interrupts will be set to MAX_INTERRUPTS, and events will be
throttled within the __perf_event_account_interrupt() function.

However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the
PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()
function to avoid throttling. When the perf framework unthrottled the event
in the timer interrupt handler, it triggers riscv_pmu_start() function
and causes a WARN_ON_ONCE() warning, as shown below:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e
Modules linked in:
CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1
Hardware name: SiFive (DT)
epc : riscv_pmu_start+0x7c/0x8e
  ra : riscv_pmu_start+0x28/0x8e
epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0
  gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0
  t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720
  s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000
  a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000
  a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030
  s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00
  s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000
  s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340
  s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796
  t5 : 0000000700000000 t6 : ffffaf8005269870
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e
[<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174
[<ffffffff80188642>] perf_event_task_tick+0x88/0x9c
[<ffffffff800626a8>] scheduler_tick+0xfe/0x27c
[<ffffffff800b5640>] update_process_times+0x9a/0xba
[<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66
[<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0
[<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4
[<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe
[<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42
[<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2
[<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36

After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,
they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag
after perf_event_overflow() function nor do they add PERF_HES_STOPPED
flag checking in *_pmu_start() which don't cause this warning.

Thus, it's recommended to remove this unnecessary check in
riscv_pmu_start() function to prevent this warning.

Signed-off-by: Eric Lin <eric.lin@sifive.com>
Link: https://lore.kernel.org/r/20230710154328.19574-1-eric.lin@sifive.com
Fixes: 096b52fd2bb4 ("perf: RISC-V: throttle perf events")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

mailmap: add entry for Jonas Gorski

The openwrt.org email address is long defunct, but still pop ups from
time to time when asking get_maintainer.pl. So add an entry to my
currently used address.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20230708195309.72767-2-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS: add myself for spi-bcm63xx

I noticed the driver is unclaimed. Since I was the last one doing
substantial work on it, add me as the maintainer.

As it is only found in legacy products, mark it as "Odd Fixes"
instead of "Maintained".

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230708195309.72767-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>