net: Write lock dev_base_lock without disabling bottom halves.

[ Upstream commit fd888e85fe6b661e78044dddfec0be5271afa626 ]

The writer acquires dev_base_lock with disabled bottom halves.
The reader can acquire dev_base_lock without disabling bottom halves
because there is no writer in softirq context.

On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves (as in write_lock_bh()) and somewhere else with
enabled bottom halves (as by read_lock() in netstat_show()) followed by
disabling bottom halves (cxgb_get_stats() -> t4_wr_mbox_meat_timeout()
-> spin_lock_bh()). This is the reverse locking order.

All read_lock() invocation are from sysfs callback which are not invoked
from softirq context. Therefore there is no need to disable bottom
halves while acquiring a write lock.

Acquire the write lock of dev_base_lock without disabling bottom halves.

Reported-by: Pei Zhang <pezhang@redhat.com>
Reported-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Prevent kmemleak from accessing pKVM memory

[ Upstream commit 56961c6331463cce2d84d0f973177a517fb33a82 ]

Commit a7259df76702 ("memblock: make memblock_find_in_range method
private") changed the API using which memory is reserved for the pKVM
hypervisor. However, memblock_phys_alloc() differs from the original API in
terms of kmemleak semantics -- the old one didn't report the reserved
regions to kmemleak while the new one does. Unfortunately, when protected
KVM is enabled, all kernel accesses to pKVM-private memory result in a
fatal exception, which can now happen because of kmemleak scans:

$ echo scan > /sys/kernel/debug/kmemleak
[   34.991354] kvm [304]: nVHE hyp BUG at: [<ffff800008fa3750>] __kvm_nvhe_handle_host_mem_abort+0x270/0x290!
[   34.991580] kvm [304]: Hyp Offset: 0xfffe8be807e00000
[   34.991813] Kernel panic - not syncing: HYP panic:
[   34.991813] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800
[   34.991813] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000
[   34.991813] VCPU:0000000000000000
[   34.993660] CPU: 0 PID: 304 Comm: bash Not tainted 5.19.0-rc2 #102
[   34.994059] Hardware name: linux,dummy-virt (DT)
[   34.994452] Call trace:
[   34.994641]  dump_backtrace.part.0+0xcc/0xe0
[   34.994932]  show_stack+0x18/0x6c
[   34.995094]  dump_stack_lvl+0x68/0x84
[   34.995276]  dump_stack+0x18/0x34
[   34.995484]  panic+0x16c/0x354
[   34.995673]  __hyp_pgtable_total_pages+0x0/0x60
[   34.995933]  scan_block+0x74/0x12c
[   34.996129]  scan_gray_list+0xd8/0x19c
[   34.996332]  kmemleak_scan+0x2c8/0x580
[   34.996535]  kmemleak_write+0x340/0x4a0
[   34.996744]  full_proxy_write+0x60/0xbc
[   34.996967]  vfs_write+0xc4/0x2b0
[   34.997136]  ksys_write+0x68/0xf4
[   34.997311]  __arm64_sys_write+0x20/0x2c
[   34.997532]  invoke_syscall+0x48/0x114
[   34.997779]  el0_svc_common.constprop.0+0x44/0xec
[   34.998029]  do_el0_svc+0x2c/0xc0
[   34.998205]  el0_svc+0x2c/0x84
[   34.998421]  el0t_64_sync_handler+0xf4/0x100
[   34.998653]  el0t_64_sync+0x18c/0x190
[   34.999252] SMP: stopping secondary CPUs
[   35.000034] Kernel Offset: disabled
[   35.000261] CPU features: 0x800,00007831,00001086
[   35.000642] Memory Limit: none
[   35.001329] ---[ end Kernel panic - not syncing: HYP panic:
[   35.001329] PS:600003c9 PC:0000f418011a3750 ESR:00000000f2000800
[   35.001329] FAR:ffff000439200000 HPFAR:0000000004792000 PAR:0000000000000000
[   35.001329] VCPU:0000000000000000 ]---

Fix this by explicitly excluding the hypervisor's memory pool from
kmemleak like we already do for the hyp BSS.

Cc: Mike Rapoport <rppt@kernel.org>
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220616161135.3997786-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: aquantia: Fix AN when higher speeds than 1G are not advertised

[ Upstream commit 9b7fd1670a94a57d974795acebde843a5c1a354e ]

Even when the eth port is resticted to work with speeds not higher than 1G,
and so the eth driver is requesting the phy (via phylink) to advertise up
to 1000BASET support, the aquantia phy device is still advertising for 2.5G
and 5G speeds.
Clear these advertising defaults when requested.

Cc: Ondrej Spacek <ondrej.spacek@nxp.com>
Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: storvsc: Correct reporting of Hyper-V I/O size limits

[ Upstream commit 1d3e0980782fbafaf93285779fd3905e4f866802 ]

Current code is based on the idea that the max number of SGL entries
also determines the max size of an I/O request.  While this idea was
true in older versions of the storvsc driver when SGL entry length
was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable
scatterlist entry lengths > 4Kbytes") removed that limitation. It's
now theoretically possible for the block layer to send requests that
exceed the maximum size supported by Hyper-V. This problem doesn't
currently happen in practice because the block layer defaults to a
512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes.
But some future configuration of Hyper-V could have a smaller max I/O
size, and the block layer could exceed that max.

Fix this by correctly setting max_sectors as well as sg_tablesize to
reflect the maximum I/O size that Hyper-V reports. While allowing
I/O sizes larger than the block layer default of 512 Kbytes doesn’t
provide any noticeable performance benefit in the tests we ran, it's
still appropriate to report the correct underlying Hyper-V capabilities
to the Linux block layer.

Also tweak the virt_boundary_mask to reflect that the required
alignment derives from Hyper-V communication using a 4 Kbyte page size,
and not on the guest page size, which might be bigger (eg. ARM64).

Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, x86: Fix tail call count offset calculation on bpf2bpf call

[ Upstream commit ff672c67ee7635ca1e28fb13729e8ef0d1f08ce5 ]

On x86-64 the tail call count is passed from one BPF function to another
through %rax. Additionally, on function entry, the tail call count value
is stored on stack right after the BPF program stack, due to register
shortage.

The stored count is later loaded from stack either when performing a tail
call - to check if we have not reached the tail call limit - or before
calling another BPF function call in order to pass it via %rax.

In the latter case, we miscalculate the offset at which the tail call count
was stored on function entry. The JIT does not take into account that the
allocated BPF program stack is always a multiple of 8 on x86, while the
actual stack depth does not have to be.

This leads to a load from an offset that belongs to the BPF stack, as shown
in the example below:

SEC("tc")
int entry(struct __sk_buff *skb)
{
/* Have data on stack which size is not a multiple of 8 */
volatile char arr[1] = {};
return subprog_tail(skb);
}

int entry(struct __sk_buff * skb):
   0: (b4) w2 = 0
   1: (73) *(u8 *)(r10 -1) = r2
   2: (85) call pc+1#bpf_prog_ce2f79bb5f3e06dd_F
   3: (95) exit

int entry(struct __sk_buff * skb):
   0xffffffffa0201788:  nop    DWORD PTR [rax+rax*1+0x0]
   0xffffffffa020178d:  xor    eax,eax
   0xffffffffa020178f:  push   rbp
   0xffffffffa0201790:  mov    rbp,rsp
   0xffffffffa0201793:  sub    rsp,0x8
   0xffffffffa020179a:  push   rax
   0xffffffffa020179b:  xor    esi,esi
   0xffffffffa020179d:  mov    BYTE PTR [rbp-0x1],sil
   0xffffffffa02017a1:  mov    rax,QWORD PTR [rbp-0x9] !!! tail call count
   0xffffffffa02017a8:  call   0xffffffffa02017d8       !!! is at rbp-0x10
   0xffffffffa02017ad:  leave
   0xffffffffa02017ae:  ret

Fix it by rounding up the BPF stack depth to a multiple of 8, when
calculating the tail call count offset on stack.

Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220616162037.535469-2-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: Fix crash during suspend after component bind failure

[ Upstream commit 1342b5b23da9559a1578978eaff7f797d8a87d91 ]

If the component driver fails to bind, or is unbound, the driver data
for the top-level platform device points to a freed drm_device. If the
system is then suspended, the driver passes this dangling pointer to
drm_mode_config_helper_suspend(), which crashes.

Fix this by only setting the driver data while the platform driver holds
a reference to the drm_device.

Fixes: 624b4b48d9d8 ("drm: sun4i: Add support for suspending the display driver")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615054254.16352-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix request_sock leak in sk lookup helpers

[ Upstream commit 3046a827316c0e55fc563b4fb78c93b9ca5c7c37 ]

A customer reported a request_socket leak in a Calico cloud environment. We
found that a BPF program was doing a socket lookup with takes a refcnt on
the socket and that it was finding the request_socket but returning the parent
LISTEN socket via sk_to_full_sk() without decrementing the child request socket
1st, resulting in request_sock slab object leak. This patch retains the
existing behaviour of returning full socks to the caller but it also decrements
the child request_socket if one is present before doing so to prevent the leak.

Thanks to Curtis Taylor for all the help in diagnosing and testing this. And
thanks to Antoine Tenart for the reproducer and patch input.

v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to
validate RCU flags on the listen socket so that it balances with bpf_sk_release()
and update comments as per Martin KaFai Lau's suggestion. One small change to
Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra
instruction.

Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()")
Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper")
Co-developed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Curtis Taylor <cutaylor-pub@yahoo.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/56d6f898-bde0-bb25-3427-12a330b29fb8@iogearbox.net
Link: https://lore.kernel.org/bpf/20220615011540.813025-1-jmaxwell37@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: use for_each_sgtable_sg to iterate over scatterlist

[ Upstream commit 62b5e322fb6cc5a5a91fdeba0e4e57e75d9f4387 ]

The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents
with 1, so msm_iommu_pagetable_map maps only the first physical segment.

To fix this problem use for_each_sgtable_sg(), which uses orig_nents.

Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: Fix generic transmit when completion queue reservation fails

[ Upstream commit a6e944f25cdbe6b82275402b8bc9a55ad7aac10b ]

Two points of potential failure in the generic transmit function are:

  1. completion queue (cq) reservation failure.
  2. skb allocation failure

Originally the cq reservation was performed first, followed by the skb
allocation. Commit 675716400da6 ("xdp: fix possible cq entry leak")
reversed the order because at the time there was no mechanism available
to undo the cq reservation which could have led to possible cq entry leaks
in the event of skb allocation failure. However if the skb allocation is
performed first and the cq reservation then fails, the xsk skb destructor
is called which blindly adds the skb address to the already full cq leading
to undefined behavior.

This commit restores the original order (cq reservation followed by skb
allocation) and uses the xskq_prod_cancel helper to undo the cq reserve
in event of skb allocation failure.

Fixes: 675716400da6 ("xdp: fix possible cq entry leak")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220614070746.8871-1-ciara.loftus@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Exclude zero from the endpoint ID range

[ Upstream commit f6eed15f3ea76596ccc689331e1cc850b999133b ]

The kernel returns an endpoint ID as r.ep_connect_ret.handle in the
iscsi_uevent. The iscsid validates a received endpoint ID and treats zero
as an error. The commit referenced in the fixes line changed the endpoint
ID range, and zero is always assigned to the first endpoint ID.  So, the
first attempt to create a new iSER connection always fails.

Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com
Fixes: 3c6ae371b8a1 ("scsi: iscsi: Release endpoint ID when its freed")
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Switch ordering of runpm put vs devfreq_idle

[ Upstream commit 49e477610087a02c3604061b8f3ee3a25a493987 ]

In msm_devfreq_suspend() we cancel idle_work synchronously so that it
doesn't run after we power of the hw or in the resume path.  But this
means that we want to ensure that idle_work is not scheduled *after* we
no longer hold a runpm ref.  So switch the ordering of pm_runtime_put()
vs msm_devfreq_idle().

v2. Only move the runpm _put_autosuspend, and not the _mark_last_busy()

Fixes: 9bc95570175a ("drm/msm: Devfreq tuning")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927152928.831245-1-robdclark@gmail.com
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220608161334.2140611-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix zone transition to full condition

[ Upstream commit 566d3c57eb526f32951af15866086e236ce1fc8a ]

When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.

Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.

Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: use get_random_u32 instead of prandom

[ Upstream commit b1fd94e704571f98b21027340eecf821b2bdffba ]

bh might occur while updating per-cpu rnd_state from user context,
ie. local_out path.

BUG: using smp_processor_id() in preemptible [00000000] code: nginx/2725
caller is nft_ng_random_eval+0x24/0x54 [nft_numgen]
Call Trace:
 check_preemption_disabled+0xde/0xe0
 nft_ng_random_eval+0x24/0x54 [nft_numgen]

Use the random driver instead, this also avoids need for local prandom
state. Moreover, prandom now uses the random driver since d4150779e60f
("random32: use real rng for non-deterministic randomness").

Based on earlier patch from Pablo Neira.

Fixes: 6b2faee0ca91 ("netfilter: nft_meta: place prandom handling in a helper")
Fixes: 978d8f9055c3 ("netfilter: nft_numgen: add map lookups for numgen random operations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix double pm_runtime_disable() call

[ Upstream commit ce0db505bc0c51ef5e9ba446c660de7e26f78f29 ]

Following commit 17e822f7591f ("drm/msm: fix unbalanced
pm_runtime_enable in adreno_gpu_{init, cleanup}"), any call to
adreno_unbind() will disable runtime PM twice, as indicated by the call
trees below:

  adreno_unbind()
   -> pm_runtime_force_suspend()
   -> pm_runtime_disable()

  adreno_unbind()
   -> gpu->funcs->destroy() [= aNxx_destroy()]
   -> adreno_gpu_cleanup()
   -> pm_runtime_disable()

Note that pm_runtime_force_suspend() is called right before
gpu->funcs->destroy() and both functions are called unconditionally.

With recent addition of the eDP AUX bus code, this problem manifests
itself when the eDP panel cannot be found yet and probing is deferred.
On the first probe attempt, we disable runtime PM twice as described
above. This then causes any later probe attempt to fail with

  [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13

preventing the driver from loading.

As there seem to be scenarios where the aNxx_destroy() functions are not
called from adreno_unbind(), simply removing pm_runtime_disable() from
inside adreno_unbind() does not seem to be the proper fix. This is what
commit 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in
adreno_gpu_{init, cleanup}") intended to fix. Therefore, instead check
whether runtime PM is still enabled, and only disable it in that case.

Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20220606211305.189585-1-luzmaximilian@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Ensure mmap offset is initialized

[ Upstream commit 036d20726c30267724416e966c9f92db07de8081 ]

If a GEM object is allocated, and then exported as a dma-buf fd which is
mmap'd before or without the GEM buffer being directly mmap'd, the
vma_node could be unitialized.  This leads to a situation where the CPU
mapping is not correctly torn down in drm_vma_node_unmap().

Fixes: e5516553999f ("drm: call drm_gem_object_funcs.mmap with fake offset")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220531200857.136547-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: option: add Quectel RM500K module support

commit 15b694e96c31807d8515aacfa687a1e8a4fbbadc upstream.

Add usb product id of the Quectel RM500K module.

RM500K provides 2 mandatory interfaces to Linux host after enumeration.
 - /dev/ttyUSB5: this is a serial interface for control path. User needs
   to write AT commands to this device node to query status, set APN,
   set PIN code, and enable/disable the data connection to 5G network.
 - ethX: this is the data path provided as a RNDIS devices. After the
   data connection has been established, Linux host can access 5G data
   network via this interface.

"RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs

usb-devices output for 0x7001:
T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=7001 Rev=00.01
S:  Manufacturer=MediaTek Inc.
S:  Product=USB DATA CARD
S:  SerialNumber=869206050009672
C:  #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Co-developed-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Quectel EM05-G modem

commit 33b29dbb39bcbd0a96e440646396bbf670b914fa upstream.

The EM05-G modem has 2 USB configurations that are configurable via the AT
command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
the following interfaces, respectively:

"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM" : MBIM + AT + DIAG + NMEA + Modem

The detailed description of the USB configuration for each mode as follows:

RMNET Mode
--------------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030a Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MBIM Mode
--------------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030a Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Telit LE910Cx 0x1250 composition

commit 342fc0c3b345525da21112bd0478a0dc741598ea upstream.

Add support for the following Telit LE910Cx composition:

0x1250: rmnet, tty, tty, tty, tty

Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: pl2303: add support for more HXN (G) types

commit ae60aac59a9ad8ab64a4b07de509a534a75b6bac upstream.

Add support for further HXN (G) type devices (GT variant, GL variant, GS
variant and GR) and document the bcdDevice mapping.

Note that the TA and TB types use the same bcdDevice as some GT and GE
variants, respectively, but that the HX status request can be used to
determine which is which.

Also note that we currently do not distinguish between the various HXN
(G) types in the driver but that this may change eventually (e.g. when
adding GPIO support).

Reported-by: Charles Yeh <charlesyeh522@gmail.com>
Link: https://lore.kernel.org/r/YrF77b9DdeumUAee@hovoldconsulting.com
Cc: stable@vger.kernel.org # 5.13
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Implement w/a 22010492432 for adl-s

commit 13bd259b64bb58ae130923ada42ebc19bf3f2fa2 upstream.

adl-s needs the combo PLL DCO fraction w/a as well.
Gets us slightly more accurate clock out of the PLL.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613201439.23341-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d36bdd77b9e6aa7f5cb7b0f11ebbab8e5febf10b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher()

commit cc72b72073ac982a954d3b43519ca1c28f03c27c upstream.

There is a small chance that get_kretprobe(ri) returns NULL in
kretprobe_dispatcher() when another CPU unregisters the kretprobe
right after __kretprobe_trampoline_handler().

To avoid this issue, kretprobe_dispatcher() checks the get_kretprobe()
return value again. And if it is NULL, it returns soon because that
kretprobe is under unregistering process.

This issue has been introduced when the kretprobe is decoupled
from the struct kretprobe_instance by commit d741bf41d7c7
("kprobes: Remove kretprobe hash"). Before that commit, the
struct kretprob_instance::rp directly points the kretprobe
and it is never be NULL.

Link: https://lkml.kernel.org/r/165366693881.797669.16926184644089588731.stgit@devnote2
Reported-by: Yonghong Song <yhs@fb.com>
Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kernel Team <kernel-team@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm mirror log: clear log bits up to BITS_PER_LONG boundary

commit 90736eb3232d208ee048493f371075e4272e0944 upstream.

Commit 85e123c27d5c ("dm mirror log: round up region bitmap size to
BITS_PER_LONG") introduced a regression on 64-bit architectures in the
lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation.

If the device is shrunk, we need to clear log bits beyond the end of the
device. The code clears bits up to a 32-bit boundary and then calculates
lc->sync_count by summing set bits up to a 64-bit boundary (the commit
changed that; previously, this boundary was 32-bit too). So, it was using
some non-zeroed bits in the calculation and this caused misbehavior.

Fix this regression by clearing bits up to BITS_PER_LONG boundary.

Fixes: 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG")
Cc: stable@vger.kernel.org
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm era: commit metadata in postsuspend after worker stops

commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream.

During postsuspend dm-era does the following:

1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
   current era
3. Stops the worker

Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.

As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.

In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:

1. Load a new table, e.g. a snapshot-origin table, to a device with a
   dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
   writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
   metadata, which don't include the extra writes done by the worker
   after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
    destroys the dm-bufio client, which results in flushing the cached
    writes to disk
11. These writes might overwrite the writes done by the new dm-era
    instance, hence corrupting its metadata.

Fix this by committing the metadata after the worker stops running.

stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.

This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.

Use drain_workqueue instead, which waits until the work and all
re-queued works finish.

Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libata: add qc->flags in ata_qc_complete_template tracepoint

commit 540a92bfe6dab7310b9df2e488ba247d784d0163 upstream.

Add flags value to check the result of ata completion

Fixes: 255c03d15a29 ("libata: Add tracepoints")
Cc: stable@vger.kernel.org
Signed-off-by: Edward Wu <edwardwu@realtek.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: gpmi: Fix setting busy timeout setting

commit 06781a5026350cde699d2d10c9914a25c1524f45 upstream.

The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as:

| Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY
| mode. This value is the number of GPMI_CLK cycles multiplied by 4096.

So instead of multiplying the value in cycles with 4096, we have to
divide it by that value. Use DIV_ROUND_UP to make sure we are on the
safe side, especially when the calculated value in cycles is smaller
than 4096 as typically the case.

This bug likely never triggered because any timeout != 0 usually will
do. In my case the busy timeout in cycles was originally calculated as
2408, which multiplied with 4096 is 0x968000. The lower 16 bits were
taken for the 16 bit wide register field, so the register value was
0x8000. With 2970bf5a32f0 ("mtd: rawnand: gpmi: fix controller timings
setting") however the value in cycles became 2384, which multiplied
with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an
intermediate timeout when reading from NAND.

Fixes: b1206122069aa ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: Add new IOMMU development mailing list

commit c242507c1b895646b4a25060df13b6214805759f upstream.

The IOMMU mailing list will move from lists.linux-foundation.org to
lists.linux.dev. The hard switch of the archive will happen on July
5th, but add the new list now already so that people start using the
list when sending patches. After July 5th the old list will disappear.

Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220624125139.412-1-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gntdev: Avoid blocking in unmap_grant_pages()

commit dbe97cff7dd9f0f75c524afdd55ad46be3d15295 upstream.

unmap_grant_pages() currently waits for the pages to no longer be used.
In https://github.com/QubesOS/qubes-issues/issues/7481, this lead to a
deadlock against i915: i915 was waiting for gntdev's MMU notifier to
finish, while gntdev was waiting for i915 to free its pages.  I also
believe this is responsible for various deadlocks I have experienced in
the past.

Avoid these problems by making unmap_grant_pages async.  This requires
making it return void, as any errors will not be available when the
function returns.  Fortunately, the only use of the return value is a
WARN_ON(), which can be replaced by a WARN_ON when the error is
detected.  Additionally, a failed call will not prevent further calls
from being made, but this is harmless.

Because unmap_grant_pages is now async, the grant handle will be sent to
INVALID_GRANT_HANDLE too late to prevent multiple unmaps of the same
handle.  Instead, a separate bool array is allocated for this purpose.
This wastes memory, but stuffing this information in padding bytes is
too fragile.  Furthermore, it is necessary to grab a reference to the
map before making the asynchronous call, and release the reference when
the call returns.

It is also necessary to guard against reentrancy in gntdev_map_put(),
and to handle the case where userspace tries to map a mapping whose
contents have not all been freed yet.

Fixes: 745282256c75 ("xen/gntdev: safely unmap grants in case they are still in use")
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220622022726.2538-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mediatek: wait dma stop bit reset to 0

commit 89bcd9a64b849380ef57e3032b307574e48db524 upstream.

MediaTek IP requires that after dma stop, it need to wait this dma stop
bit auto-reset to 0. When bus is in high loading state, it will take a
while for the dma stop complete. If there is no waiting operation here,
when program runs to clear fifo and reset, bus will hang.

In addition, there should be no return in msdc_data_xfer_next() if
there is data need be transferred, because no matter what error occurs
here, it should continue to excute to the following mmc_request_done.
Otherwise the core layer may wait complete forever.

Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220609112239.18911-1-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing

commit e591fcf6b4e39335c9b128b17738fcd2fdd278ae upstream.

The result from ->get_cd() may be incorrect as the card detect debouncing
isn't managed correctly. Let's fix it.

Signed-off-by: Chevron Li<chevron.li@bayhubtech.com>
Fixes: 7d44061704dd ("mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220602132543.596-1-chevron.li@bayhubtech.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvfc: Allocate/free queue resource only during probe/remove

commit 72ea7fe0db73d65c7d977208842d8ade9b823de9 upstream.

Currently, the sub-queues and event pool resources are allocated/freed for
every CRQ connection event such as reset and LPM. This exposes the driver
to a couple issues. First the inefficiency of freeing and reallocating
memory that can simply be resued after being sanitized. Further, a system
under memory pressue runs the risk of allocation failures that could result
in a crippled driver. Finally, there is a race window where command
submission/compeletion can try to pull/return elements from/to an event
pool that is being deleted or already has been deleted due to the lack of
host state around freeing/allocating resources. The following is an example
of list corruption following a live partition migration (LPM):

Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1
NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10
REGS: c00000025c10b760 TRAP: 0700  Not tainted (5.14.0-70.9.1.el9_0.ppc64le)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f
CFAR: c0000000001f55bc IRQMASK: 0
        GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e
        GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027
        GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000
        GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0
        GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
        GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300
        GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000
        GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300
NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100
LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100
Call Trace:
[c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable)
[c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc]
[c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc]
[c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc]
[c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc]
[c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc]
[c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0
[c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78
3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640
---[ end trace 11a2b65a92f8b66c ]---
ibmvfc 30000003: Send warning. Receive queue closed, will retry.

Add registration/deregistration helpers that are called instead during
connection resets to sanitize and reconfigure the queues.

Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvfc: Store vhost pointer during subcrq allocation

commit aeaadcde1a60138bceb65de3cdaeec78170b4459 upstream.

Currently the back pointer from a queue to the vhost adapter isn't set
until after subcrq interrupt registration. The value is available when a
queue is first allocated and can/should be also set for primary and async
queues as well as subcrqs.

This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS
interrupt controller where a pending subcrq interrupt from the previous
kernel can be replayed immediately upon IRQ registration resulting in
dereference of a garbage backpointer in ibmvfc_interrupt_scsi().

Kernel attempted to read user page (58) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000058
Faulting instruction address: 0xc008000003216a08
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc]
LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
Call Trace:
[c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable)
[c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
[c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188
[c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310
[c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80
[c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0
[c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130
[c000000014622f60] [0000000020000000] 0x20000000
[c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0
[c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0
[c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170
[c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0
[c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0
[c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230
[c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc]
[c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc]
[c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc]
[c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc]
[c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: add error messages to all unrecognized mount options

commit e3a4167c880cf889f66887a152799df4d609dd21 upstream.

Almost none of the errors stemming from a valid mount option but wrong
value prints a descriptive message which would help to identify why
mount failed. Like in the linked report:

  $ uname -r
  v4.19
  $ mount -o compress=zstd /dev/sdb /mnt
  mount: /mnt: wrong fs type, bad option, bad superblock on
  /dev/sdb, missing codepage or helper program, or other error.
  $ dmesg
  ...
  BTRFS error (device sdb): open_ctree failed

Errors caused by memory allocation failures are left out as it's not a
user error so reporting that would be confusing.

Link: https://lore.kernel.org/linux-btrfs/9c3fec36-fc61-3a33-4977-a7e207c3fa4e@gmx.de/
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: prevent remounting to v1 space cache for subpage mount

commit 0591f04036218d572d54349ea8c7914ad9c82b2b upstream.

Upstream commit 9f73f1aef98b ("btrfs: force v2 space cache usage for
subpage mount") forces subpage mount to use v2 cache, to avoid
deprecated v1 cache which doesn't support subpage properly.

But there is a loophole that user can still remount to v1 cache.

The existing check will only give users a warning, but does not really
prevent to do the remount.

Although remounting to v1 will not cause any problems since the v1 cache
will always be marked invalid when mounted with a different page size,
it's still better to prevent v1 cache at all for subpage mounts.

Fixes: 9f73f1aef98b ("btrfs: force v2 space cache usage for subpage mount")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix hang during unmount when block group reclaim task is running

commit 31e70e527806c546a72262f2fc3d982ee23c42d3 upstream.

When we start an unmount, at close_ctree(), if we have the reclaim task
running and in the middle of a data block group relocation, we can trigger
a deadlock when stopping an async reclaim task, producing a trace like the
following:

[629724.498185] task:kworker/u16:7   state:D stack:    0 pid:681170 ppid:     2 flags:0x00004000
[629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
[629724.501267] Call Trace:
[629724.501759]  <TASK>
[629724.502174]  __schedule+0x3cb/0xed0
[629724.502842]  schedule+0x4e/0xb0
[629724.503447]  btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs]
[629724.504534]  ? prepare_to_wait_exclusive+0xc0/0xc0
[629724.505442]  flush_space+0x423/0x630 [btrfs]
[629724.506296]  ? rcu_read_unlock_trace_special+0x20/0x50
[629724.507259]  ? lock_release+0x220/0x4a0
[629724.507932]  ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs]
[629724.508940]  ? do_raw_spin_unlock+0x4b/0xa0
[629724.509688]  btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs]
[629724.510922]  process_one_work+0x252/0x5a0
[629724.511694]  ? process_one_work+0x5a0/0x5a0
[629724.512508]  worker_thread+0x52/0x3b0
[629724.513220]  ? process_one_work+0x5a0/0x5a0
[629724.514021]  kthread+0xf2/0x120
[629724.514627]  ? kthread_complete_and_exit+0x20/0x20
[629724.515526]  ret_from_fork+0x22/0x30
[629724.516236]  </TASK>
[629724.516694] task:umount          state:D stack:    0 pid:719055 ppid:695412 flags:0x00004000
[629724.518269] Call Trace:
[629724.518746]  <TASK>
[629724.519160]  __schedule+0x3cb/0xed0
[629724.519835]  schedule+0x4e/0xb0
[629724.520467]  schedule_timeout+0xed/0x130
[629724.521221]  ? lock_release+0x220/0x4a0
[629724.521946]  ? lock_acquired+0x19c/0x420
[629724.522662]  ? trace_hardirqs_on+0x1b/0xe0
[629724.523411]  __wait_for_common+0xaf/0x1f0
[629724.524189]  ? usleep_range_state+0xb0/0xb0
[629724.524997]  __flush_work+0x26d/0x530
[629724.525698]  ? flush_workqueue_prep_pwqs+0x140/0x140
[629724.526580]  ? lock_acquire+0x1a0/0x310
[629724.527324]  __cancel_work_timer+0x137/0x1c0
[629724.528190]  close_ctree+0xfd/0x531 [btrfs]
[629724.529000]  ? evict_inodes+0x166/0x1c0
[629724.529510]  generic_shutdown_super+0x74/0x120
[629724.530103]  kill_anon_super+0x14/0x30
[629724.530611]  btrfs_kill_super+0x12/0x20 [btrfs]
[629724.531246]  deactivate_locked_super+0x31/0xa0
[629724.531817]  cleanup_mnt+0x147/0x1c0
[629724.532319]  task_work_run+0x5c/0xa0
[629724.532984]  exit_to_user_mode_prepare+0x1a6/0x1b0
[629724.533598]  syscall_exit_to_user_mode+0x16/0x40
[629724.534200]  do_syscall_64+0x48/0x90
[629724.534667]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[629724.535318] RIP: 0033:0x7fa2b90437a7
[629724.535804] RSP: 002b:00007ffe0b7e4458 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[629724.536912] RAX: 0000000000000000 RBX: 00007fa2b9182264 RCX: 00007fa2b90437a7
[629724.538156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000555d6cf20dd0
[629724.539053] RBP: 0000555d6cf20ba0 R08: 0000000000000000 R09: 00007ffe0b7e3200
[629724.539956] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[629724.540883] R13: 0000555d6cf20dd0 R14: 0000555d6cf20cb0 R15: 0000000000000000
[629724.541796]  </TASK>

This happens because:

1) Before entering close_ctree() we have the async block group reclaim
   task running and relocating a data block group;

2) There's an async metadata (or data) space reclaim task running;

3) We enter close_ctree() and park the cleaner kthread;

4) The async space reclaim task is at flush_space() and runs all the
   existing delayed iputs;

5) Before the async space reclaim task calls
   btrfs_wait_on_delayed_iputs(), the block group reclaim task which is
   doing the data block group relocation, creates a delayed iput at
   replace_file_extents() (called when COWing leaves that have file extent
   items pointing to relocated data extents, during the merging phase
   of relocation roots);

6) The async reclaim space reclaim task blocks at
   btrfs_wait_on_delayed_iputs(), since we have a new delayed iput;

7) The task at close_ctree() then calls cancel_work_sync() to stop the
   async space reclaim task, but it blocks since that task is waiting for
   the delayed iput to be run;

8) The delayed iput is never run because the cleaner kthread is parked,
   and no one else runs delayed iputs, resulting in a hang.

So fix this by stopping the async block group reclaim task before we
park the cleaner kthread.

Fixes: 18bb8bbf13c183 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: fix fid refcount leak in v9fs_vfs_get_link

commit e5690f263208c5abce7451370b7786eb25b405eb upstream.

we check for protocol version later than required, after a fid has
been obtained. Just move the version check earlier.

Link: https://lkml.kernel.org/r/20220612085330.1451496-3-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl

commit beca774fc51a9ba8abbc869cf0c3d965ff17cd24 upstream.

We need to release directory fid if we fail halfway through open

This fixes fid leaking with xfstests generic 531

Link: https://lkml.kernel.org/r/20220612085330.1451496-2-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reported-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: Fix refcounting during full path walks for fid lookups

commit 2a3dcbccd64ba35c045fac92272ff981c4cbef44 upstream.

Decrement the refcount of the parent dentry's fid after walking
each path component during a full path walk for a lookup. Failure to do
so can lead to fids that are not clunked until the filesystem is
unmounted, as indicated by this warning:

 9pnet: found fid 3 not clunked

The improper refcounting after walking resulted in open(2) returning
-EIO on any directories underneath the mount point when using the virtio
transport. When using the fd transport, there's no apparent issue until
the filesytem is unmounted and the warning above is emitted to the logs.

In some cases, the user may not yet be attached to the filesystem and a
new root fid, associated with the user, is created and attached to the
root dentry before the full path walk is performed. Increment the new
root fid's refcount to two in that situation so that it can be safely
decremented to one after it is used for the walk operation. The new fid
will still be attached to the root dentry when
v9fs_fid_lookup_with_uid() returns so a final refcount of one is
correct/expected.

Link: https://lkml.kernel.org/r/20220527000003.355812-2-tyhicks@linux.microsoft.com
Link: https://lkml.kernel.org/r/20220612085330.1451496-4-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: fix clunking fid multiple times discussed in second link]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: openvswitch: fix parsing of nw_proto for IPv6 fragments

commit 12378a5a75e33f34f8586706eb61cca9e6d4690c upstream.

When a packet enters the OVS datapath and does not match any existing
flows installed in the kernel flow cache, the packet will be sent to
userspace to be parsed, and a new flow will be created. The kernel and
OVS rely on each other to parse packet fields in the same way so that
packets will be handled properly.

As per the design document linked below, OVS expects all later IPv6
fragments to have nw_proto=44 in the flow key, so they can be correctly
matched on OpenFlow rules. OpenFlow controllers create pipelines based
on this design.

This behavior was changed by the commit in the Fixes tag so that
nw_proto equals the next_header field of the last extension header.
However, there is no counterpart for this change in OVS userspace,
meaning that this field is parsed differently between OVS and the
kernel. This is a problem because OVS creates actions based on what is
parsed in userspace, but the kernel-provided flow key is used as a match
criteria, as described in Documentation/networking/openvswitch.rst. This
leads to issues such as packets incorrectly matching on a flow and thus
the wrong list of actions being applied to the packet. Such changes in
packet parsing cannot be implemented without breaking the userspace.

The offending commit is partially reverted to restore the expected
behavior.

The change technically made sense and there is a good reason that it was
implemented, but it does not comply with the original design of OVS.
If in the future someone wants to implement such a change, then it must
be user-configurable and disabled by default to preserve backwards
compatibility with existing OVS versions.

Cc: stable@vger.kernel.org
Fixes: fa642f08839b ("openvswitch: Derive IP protocol number for IPv6 later frags")
Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments
Signed-off-by: Rosemarie O'Riorden <roriorden@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo NS50PU

commit 627ce0d68eb4b53e995b08089fa9da1e513ec5ba upstream.

Fixes headset detection on Clevo NS50PU.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220622150017.9897-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo PD70PNT

commit d49951219b0249d3eff49e4f02e0de82357bc8a0 upstream.

Fixes speaker output and headset detection on Clevo PD70PNT.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220617133028.50568-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly

commit 56ec3e755bd1041d35bdec020a99b327697ee470 upstream.

It turned out that Lenovo shipped two completely different products
with the very same PCI SSID, where both require different quirks;
namely, Lenovo C940 has already the fixup for its speaker
(ALC298_FIXUP_LENOVO_SPK_VOLUME) with the PCI SSID 17aa:3818, while
Yoga Duet 7 has also the very same PCI SSID but requires a different
quirk, ALC287_FIXUP_YOGA7_14TIL_SPEAKERS.

Fortunately, both are with different codecs (C940 with ALC298 and Duet
7 with ALC287), hence we can apply different fixes by checking the
codec ID.  This patch implements that special fixup function.

For easier handling, the internal function for applying a specific
fixup entry is exported as __snd_hda_apply_fixup(), so that it can be
called from the codec driver.  The rest is simply calling it with a
different fixup ID depending on the codec ID.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: nikitashvets@flyium.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5ca147d1-3a2d-60c6-c491-8aa844183222@redhat.com
Link: https://lore.kernel.org/r/20220614054831.14648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - ALC897 headset MIC no sound

commit fe6900bd8156467365bd5b976df64928fdebfeb0 upstream.

There is not have Headset Mic verb table in BIOS default.
So, it will have recording issue from headset MIC.
Add the verb table value without jack detect. It will turn on Headset Mic.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop

commit b2e6b3d9bbb0a59ba7c710cc06e44cc548301f5f upstream.

The HP Omen 15 laptop needs a quirk to toggle the mute LED. It already is implemented for a different variant of the HP Omen laptop so a fixup entry is needed for this variant.

Signed-off-by: Soham Sen <contact@sohamsen.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220609181919.45535-1-contact@sohamsen.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/conexant: Fix missing beep setup

commit 5faa0bc69102f3a4c605581564c367be5eb94dfa upstream.

Currently the Conexant codec driver sets up the beep NID after calling
snd_hda_gen_parse_auto_config().  It turned out that this results in
the insufficient setup for the beep control, as the generic parser
handles the fake path in snd_hda_gen_parse_auto_config() only if the
beep_nid is set up beforehand.

For dealing with the beep widget properly, call cx_auto_parse_beep()
before snd_hda_gen_parse_auto_config() call.

Fixes: 51e19ca5f755 ("ALSA: hda/conexant - Clean up beep code")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/via: Fix missing beep setup

commit c7807b27d510e5aa53c8a120cfc02c33c24ebb5f upstream.

Like the previous fix for Conexant codec, the beep_nid has to be set
up before calling snd_hda_gen_parse_auto_config(); otherwise it'd miss
the path setup.

Fix the call order for addressing the missing beep setup.

Fixes: 0e8f9862493a ("ALSA: hda/via - Simplify control management")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: quiet urandom warning ratelimit suppression message

commit c01d4d0a82b71857be7449380338bc53dde2da92 upstream.

random.c ratelimits how much it warns about uninitialized urandom reads
using __ratelimit(). When the RNG is finally initialized, it prints the
number of missed messages due to ratelimiting.

It has been this way since that functionality was introduced back in
2018. Recently, cc1e127bfa95 ("random: remove ratelimiting for in-kernel
unseeded randomness") put a bit more stress on the urandom ratelimiting,
which teased out a bug in the implementation.

Specifically, when under pressure, __ratelimit() will print its own
message and reset the count back to 0, making the final message at the
end less useful. Secondly, it does so as a pr_warn(), which apparently
is undesirable for people's CI.

Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly
for this purpose, so we set the flag.

Fixes: 4e00b339e264 ("random: rate limit unseeded randomness warnings")
Cc: stable@vger.kernel.org
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Ron Economos <re@w6rz.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: schedule mix_interrupt_randomness() less often

commit 534d2eaf1970274150596fdd2bf552721e65d6b2 upstream.

It used to be that mix_interrupt_randomness() would credit 1 bit each
time it ran, and so add_interrupt_randomness() would schedule mix() to
run every 64 interrupts, a fairly arbitrary number, but nonetheless
considered to be a decent enough conservative estimate.

Since e3e33fc2ea7f ("random: do not use input pool from hard IRQs"),
mix() is now able to credit multiple bits, depending on the number of
calls to add(). This was done for reasons separate from this commit, but
it has the nice side effect of enabling this patch to schedule mix()
less often.

Currently the rules are:
a) Credit 1 bit for every 64 calls to add().
b) Schedule mix() once a second that add() is called.
c) Schedule mix() once every 64 calls to add().

Rules (a) and (c) no longer need to be coupled. It's still important to
have _some_ value in (c), so that we don't "over-saturate" the fast
pool, but the once per second we get from rule (b) is a plenty enough
baseline. So, by increasing the 64 in rule (c) to something larger, we
avoid calling queue_work_on() as frequently during irq storms.

This commit changes that 64 in rule (c) to be 1024, which means we
schedule mix() 16 times less often. And it does *not* need to change the
64 in rule (a).

Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Cc: stable@vger.kernel.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.50

Link: https://lore.kernel.org/r/20220623164322.288837280@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transfer

commit c50f11c6196f45c92ca48b16a5071615d4ae0572 upstream.

Invalidating the buffer memory in arch_sync_dma_for_device() for
FROM_DEVICE transfers

When using the streaming DMA API to map a buffer prior to inbound
non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU
cachelines so that they will not be written back during the transfer and
corrupt the buffer contents written by the DMA. This, however, poses two
potential problems:

  (1) If the DMA transfer does not write to every byte in the buffer,
      then the unwritten bytes will contain stale data once the transfer
      has completed.

  (2) If the buffer has a virtual alias in userspace, then stale data
      may be visible via this alias during the period between performing
      the cache invalidation and the DMA writes landing in memory.

Address both of these issues by cleaning (aka writing-back) the dirty
lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding
them using invalidation.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606152150.GA31568@willie-the-truck
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220610151228.4562-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: core: Initialize rs485 RTS polarity already on probe

commit 2dd8a74fddd21b95dcc60a2d3c9eaec993419d69 upstream.

RTS polarity of rs485-enabled ports is currently initialized on uart
open via:

tty_port_open()
  tty_port_block_til_ready()
    tty_port_raise_dtr_rts()  # if (C_BAUD(tty))
      uart_dtr_rts()
        uart_port_dtr_rts()

There's at least three problems here:

First, if no baud rate is set, RTS polarity is not initialized.
That's the right thing to do for rs232, but not for rs485, which
requires that RTS is deasserted unconditionally.

Second, if the DeviceTree property "linux,rs485-enabled-at-boot-time" is
present, RTS should be deasserted as early as possible, i.e. on probe.
Otherwise it may remain asserted until first open.

Third, even though RTS is deasserted on open and close, it may
subsequently be asserted by uart_throttle(), uart_unthrottle() or
uart_set_termios() because those functions aren't rs485-aware.
(Only uart_tiocmset() is.)

To address these issues, move RTS initialization from uart_port_dtr_rts()
to uart_configure_port().  Prevent subsequent modification of RTS
polarity by moving the existing rs485 check from uart_tiocmget() to
uart_update_mctrl().

That way, RTS is initialized on probe and then remains unmodified unless
the uart transmits data.  If rs485 is enabled at runtime (instead of at
boot) through a TIOCSRS485 ioctl(), RTS is initialized by the uart
driver's ->rs485_config() callback and then likewise remains unmodified.

The PL011 driver initializes RTS on uart open and prevents subsequent
modification in its ->set_mctrl() callback.  That code is obsoleted by
the present commit, so drop it.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/2d2acaf3a69e89b7bf687c912022b11fd29dfa1e.1642909284.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Add selftest for calling global functions from freplace

commit 2cf7b7ffdae519b284f1406012b52e2282fa36bf upstream.

Add a selftest that calls a global function with a context object parameter
from an freplace function to check that the program context type is
correctly converted to the freplace target when fetching the context type
from the kernel BTF.

v2:
- Trim includes
- Get rid of global function
- Use __noinline

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ backport: fix conflict because tests were not serialised ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs

commit f858c2b2ca04fc7ead291821a793638ae120c11d upstream.

The verifier allows programs to call global functions as long as their
argument types match, using BTF to check the function arguments. One of the
allowed argument types to such global functions is PTR_TO_CTX; however the
check for this fails on BPF_PROG_TYPE_EXT functions because the verifier
uses the wrong type to fetch the vmlinux BTF ID for the program context
type. This failure is seen when an XDP program is loaded using
libxdp (which loads it as BPF_PROG_TYPE_EXT and attaches it to a global XDP
type program).

Fix the issue by passing in the target program type instead of the
BPF_PROG_TYPE_EXT type to bpf_prog_get_ctx() when checking function
argument compatibility.

The first Fixes tag refers to the latest commit that touched the code in
question, while the second one points to the code that first introduced
the global function call verification.

v2:
- Use resolve_prog_type()

Fixes: 3363bd0cfbb8 ("bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support")
Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
Reported-by: Simon Sundberg <simon.sundberg@kau.se>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ backport: open-code missing resolve_prog_type() helper, resolve context diff ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_ether: fix regression in setting fixed MAC address

commit b337af3a4d6147000b7ca6b3438bf5c820849b37 upstream.

In systemd systems setting a fixed MAC address through
the "dev_addr" module argument fails systematically.
When checking the MAC address after the interface is created
it always has the same but different MAC address to the one
supplied as argument.

This is partially caused by systemd which by default will
set an internally generated permanent MAC address for interfaces
that are marked as having a randomly generated address.

Commit 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in
setting MAC address in setup phase") didn't take into account
the fact that the interface must be marked as having a set
MAC address when it's set as module argument.

Fixed by marking the interface with NET_ADDR_SET when
the "dev_addr" module argument is supplied.

Fixes: 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in setting MAC address in setup phase")
Cc: stable@vger.kernel.org
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20220603153459.32722-1-posteuca@mutex.one
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zonefs: fix zonefs_iomap_begin() for reads

commit c1c1204c0d0c1dccc1310b9277fb2bd8b663d8fe upstream.

If a readahead is issued to a sequential zone file with an offset
exactly equal to the current file size, the iomap type is set to
IOMAP_UNWRITTEN, which will prevent an IO, but the iomap length is
calculated as 0. This causes a WARN_ON() in iomap_iter():

[17309.548939] WARNING: CPU: 3 PID: 2137 at fs/iomap/iter.c:34 iomap_iter+0x9cf/0xe80
[...]
[17309.650907] RIP: 0010:iomap_iter+0x9cf/0xe80
[...]
[17309.754560] Call Trace:
[17309.757078]  <TASK>
[17309.759240]  ? lock_is_held_type+0xd8/0x130
[17309.763531]  iomap_readahead+0x1a8/0x870
[17309.767550]  ? iomap_read_folio+0x4c0/0x4c0
[17309.771817]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[17309.778848]  ? lock_release+0x370/0x750
[17309.784462]  ? folio_add_lru+0x217/0x3f0
[17309.790220]  ? reacquire_held_locks+0x4e0/0x4e0
[17309.796543]  read_pages+0x17d/0xb60
[17309.801854]  ? folio_add_lru+0x238/0x3f0
[17309.807573]  ? readahead_expand+0x5f0/0x5f0
[17309.813554]  ? policy_node+0xb5/0x140
[17309.819018]  page_cache_ra_unbounded+0x27d/0x450
[17309.825439]  filemap_get_pages+0x500/0x1450
[17309.831444]  ? filemap_add_folio+0x140/0x140
[17309.837519]  ? lock_is_held_type+0xd8/0x130
[17309.843509]  filemap_read+0x28c/0x9f0
[17309.848953]  ? zonefs_file_read_iter+0x1ea/0x4d0 [zonefs]
[17309.856162]  ? trace_contention_end+0xd6/0x130
[17309.862416]  ? __mutex_lock+0x221/0x1480
[17309.868151]  ? zonefs_file_read_iter+0x166/0x4d0 [zonefs]
[17309.875364]  ? filemap_get_pages+0x1450/0x1450
[17309.881647]  ? __mutex_unlock_slowpath+0x15e/0x620
[17309.888248]  ? wait_for_completion_io_timeout+0x20/0x20
[17309.895231]  ? lock_is_held_type+0xd8/0x130
[17309.901115]  ? lock_is_held_type+0xd8/0x130
[17309.906934]  zonefs_file_read_iter+0x356/0x4d0 [zonefs]
[17309.913750]  new_sync_read+0x2d8/0x520
[17309.919035]  ? __x64_sys_lseek+0x1d0/0x1d0

Furthermore, this causes iomap_readahead() to loop forever as
iomap_readahead_iter() always returns 0, making no progress.

Fix this by treating reads after the file size as access to holes,
setting the iomap type to IOMAP_HOLE, the iomap addr to IOMAP_NULL_ADDR
and using the length argument as is for the iomap length. To simplify
the code with this change, zonefs_iomap_begin() is split into the read
variant, zonefs_read_iomap_begin() and zonefs_read_iomap_ops, and the
write variant, zonefs_write_iomap_begin() and zonefs_write_iomap_ops.

Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mana: Add handling of CQE_RX_TRUNCATED

commit e4b7621982d29f26ff4d39af389e5e675a4ffed4 upstream.

The proper way to drop this kind of CQE is advancing rxq tail
without indicating the packet to the upper network layer.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Don't reinitialize DMCUB on s0ix resume

commit 79d6b9351f086e0f914a26915d96ab52286ec46c upstream.

[Why]
PSP will suspend and resume DMCUB. Driver should just wait for DMCUB to
finish the auto load before continuining instead of placing it into
reset, wiping its firmware state and reinitializing.

If we don't let DMCUB fully finish initializing for S0ix then some state
will be lost and screen corruption can occur due to incorrect address
translation.

[How]
Use dmub_srv callbacks to determine in DMCUB is running and wait for
auto-load to complete before continuining.

In S0ix DMCUB will be running and DAL fw so initialize will skip.

In S3 DMCUB will not be running and we will do a full hardware init.

In S3 DMCUB will be running but will not be DAL fw so we will also do
a full hardware init.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: use non-quiescing sske for KVM switch to keyed guest

commit 3ae11dbcfac906a8c3a480e98660a823130dc16a upstream.

The switch to a keyed guest does not require a classic sske as the other
guest CPUs are not accessing the key before the switch is complete.
By using the NQ SSKE things are faster especially with multiple guests.

Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Suggested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220530092706.11637-3-borntraeger@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.49

Link: https://lore.kernel.org/r/20220620124724.380838401@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx8mp: fix usb_root_clk parent

commit cf7f3f4fa9e57b8e9f594823e77e6cbb0ce2b254 upstream.

According to reference mannual CCGR77(usb) sources from hsio_axi, fix
it.

Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220507125430.793287-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/book3e: get rid of #include <generated/compile.h>

commit 7ad4bd887d27c6b6ffbef216f19c19f8fe2b8f52 upstream.

You cannot include <generated/compile.h> here because it is generated
in init/Makefile but there is no guarantee that it happens before
arch/powerpc/mm/nohash/kaslr_booke.c is compiled for parallel builds.

The places where you can reliably include <generated/compile.h> are:

  - init/          (because init/Makefile can specify the dependency)
  - arch/*/boot/   (because it is compiled after vmlinux)

Commit f231e4333312 ("hexagon: get rid of #include <generated/compile.h>")
fixed the last breakage at that time, but powerpc re-added this.

<generated/compile.h> was unneeded because 'build_str' is almost the
same as 'linux_banner' defined in init/version.c

Let's copy the solution from MIPS.
(get_random_boot() in arch/mips/kernel/relocate.c)

Fixes: 6a38ea1d7b94 ("powerpc/fsl_booke/32: randomize the kernel image offset")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220604085050.4078927-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-pci: Remove wrong address verification in vp_del_vqs()

commit 7e415282b41bf0d15c6e0fe268f822d9b083f2f7 upstream.

GCC 12 enhanced -Waddress when comparing array address to null [0],
which warns:

    drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’:
    drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress]
      257 |                         if (vp_dev->msix_affinity_masks[i])
          |                             ^~~~~~

In fact, the verification is comparing the result of a pointer
arithmetic, the address "msix_affinity_masks + i", which will always
evaluate to true.

Under the hood, free_cpumask_var() calls kfree(), which is safe to pass
NULL, not requiring non-null verification.  So remove the verification
to make compiler happy (happy compiler, happy life).

[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103

Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine

commit 024a7ad9eb4df626ca8c77fef4f67fd0ebd559d2 upstream.

The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220513121648.28584-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Don't read a HW interrupt pending state in user context

commit 2cdea19a34c2340b3aa69508804efe4e3750fcec upstream.

Since 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state
from the HW"), we're able to source the pending bit for an interrupt
that is stored either on the physical distributor or on a device.

However, this state is only available when the vcpu is loaded,
and is not intended to be accessed from userspace. Unfortunately,
the GICv2 emulation doesn't provide specific userspace accessors,
and we fallback with the ones that are intended for the guest,
with fatal consequences.

Add a new vgic_uaccess_read_pending() accessor for userspace
to use, build on top of the existing vgic_mmio_read_pending().

Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW")
Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add reserved GDT blocks check

commit b55c3cd102a6f48b90e61c44f7f3dda8c290c694 upstream.

We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.

 mkfs.ext4 /dev/sda 3G
 tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
 mount /dev/sda /mnt
 resize2fs /dev/sda 8G

 ========
 BUG: kernel NULL pointer dereference, address: 0000000000000028
 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
 ...
 RIP: 0010:ext4_flex_group_add+0xe08/0x2570
 ...
 Call Trace:
  <TASK>
  ext4_resize_fs+0xbec/0x1660
  __ext4_ioctl+0x1749/0x24e0
  ext4_ioctl+0x12/0x20
  __x64_sys_ioctl+0xa6/0x110
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f2dd739617b
 ========

The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make variable "count" signed

commit bc75a6eb856cb1507fa907bf6c1eda91b3fef52f upstream.

Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().

Fixes: 46c116b920eb ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix bug_on ext4_mb_use_inode_pa

commit a08f789d2ab5242c07e716baf9a835725046be89 upstream.

Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
 ext4_mb_new_blocks+0x9df/0x5d30
 ext4_ext_map_blocks+0x1803/0x4d80
 ext4_map_blocks+0x3a4/0x1a10
 ext4_writepages+0x126d/0x2c30
 do_writepages+0x7f/0x1b0
 __filemap_fdatawrite_range+0x285/0x3b0
 file_write_and_wait_range+0xb1/0x140
 ext4_sync_file+0x1aa/0xca0
 vfs_fsync_range+0xfb/0x260
 do_fsync+0x48/0xa0
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
do_fsync
 vfs_fsync_range
  ext4_sync_file
   file_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      ext4_writepages
       mpage_map_and_submit_extent
        mpage_map_one_extent
         ext4_map_blocks
          ext4_mb_new_blocks
           ext4_mb_normalize_request
            >>> start + size <= ac->ac_o_ex.fe_logical
           ext4_mb_regular_allocator
            ext4_mb_simple_scan_group
             ext4_mb_use_best_found
              ext4_mb_new_preallocation
               ext4_mb_new_inode_pa
                ext4_mb_use_inode_pa
                 >>> set ac->ac_b_ex.fe_len <= 0
           ext4_mb_mark_diskspace_used
            >>> BUG_ON(ac->ac_b_ex.fe_len <= 0);

we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`

The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.

Cc: stable@kernel.org
Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix super block checksum incorrect after mount

commit 9b6641dd95a0c441b277dd72ba22fed8d61f76ad upstream.

We got issue as follows:
[home]# mount  /dev/sda  test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock!  Retrying...

Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.

To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle

commit 57cd6d157eb479f0a8e820fd36b7240845c8a937 upstream.

RCU_NONIDLE usage during __cfi_slowpath_diag can result in an invalid
RCU state in the cpuidle code path:

  WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:613 rcu_eqs_enter+0xe4/0x138
  ...
  Call trace:
    rcu_eqs_enter+0xe4/0x138
    rcu_idle_enter+0xa8/0x100
    cpuidle_enter_state+0x154/0x3a8
    cpuidle_enter+0x3c/0x58
    do_idle.llvm.6590768638138871020+0x1f4/0x2ec
    cpu_startup_entry+0x28/0x2c
    secondary_start_kernel+0x1b8/0x220
    __secondary_switched+0x94/0x98

Instead, call rcu_irq_enter/exit to wake up RCU only when needed and
disable interrupts for the entire CFI shadow/module check when we do.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20220531175910.890307-1-samitolvanen@google.com
Fixes: cf68fffb66d6 ("add support for Clang CFI")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Cap OLED brightness per max frame-average luminance

commit 4fd17f2ac0aa4e48823ac2ede5b050fb70300bf4 upstream.

[Why]
For OLED eDP the Display Manager uses max_cll value as a limit
for brightness control.
max_cll defines the content light luminance for individual pixel.
Whereas max_fall defines frame-average level luminance.
The user may not observe the difference in brightness in between
max_fall and max_cll.
That negatively impacts the user experience.

[How]
Use max_fall value instead of max_cll as a limit for brightness control.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm mirror log: round up region bitmap size to BITS_PER_LONG

commit 85e123c27d5cbc22cfdc01de1e2ca1d9003a02d0 upstream.

The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.

Fix this bug by rounding up bitset_size to BITS_PER_LONG.

This bug was found by running the lvm2 testsuite with kasan.

Fixes: 29121bd0b00e ("[PATCH] dm mirror log: bitset_size fix")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()

commit 928ea98252ad75118950941683893cf904541da9 upstream.

In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to
fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in
fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io
triggers KASAN use-after-free. To avoid the use-after-free, keep the
reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to
fsl_destroy_mc_io().

This patch needs rework to apply to kernels older than v5.15.

Fixes: f93627146f0e ("staging: fsl-mc: fix asymmetry in destroy of mc_io")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220601105159.87752-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Store to lsr_save_flags after lsr read

commit be03b0651ffd8bab69dfd574c6818b446c0753ce upstream.

Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.

This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.

Re-add the lsr_save_flags fix and properly mark it's a fix.

Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc
Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Cc: stable <stable@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: n_gsm: Debug output allocation must use GFP_ATOMIC

commit e74024b2eccbb784824a0f9feaeaaa3b47514b79 upstream.

Dan Carpenter <dan.carpenter@oracle.com> reported the following Smatch
warning:

drivers/tty/n_gsm.c:720 gsm_data_kick()
warn: sleeping in atomic context

This is because gsm_control_message() is holding a spin lock so
gsm_hex_dump_bytes() needs to use GFP_ATOMIC instead of GFP_KERNEL.

Fixes: 925ea0fa5277 ("tty: n_gsm: Fix packet data hex dump output")
Cc: stable <stable@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220523155052.57129-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: change ep->ep safe in ffs_epfile_io()

commit 0698f0209d8032e8869525aeb68f65ee7fde12ad upstream.

In ffs_epfile_io(), when read/write data in blocking mode, it will wait
the completion in interruptible mode, if task receive a signal, it will
terminate the wait, at same time, if function unbind occurs,
ffs_func_unbind() will kfree all eps, ffs_epfile_io() still try to
dequeue request by dereferencing ep which may become invalid.

Fix it by add ep spinlock and will not dereference ep if it is not valid.

Cc: <stable@vger.kernel.org> # 5.15
Reported-by: Michael Wu <michael@allwinnertech.com>
Tested-by: Michael Wu <michael@allwinnertech.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1654863478-26228-3-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: change ep->status safe in ffs_epfile_io()

commit fb1f16d74e263baa4ad11e31e28b68f144aa55ed upstream.

If a task read/write data in blocking mode, it will wait the completion
in ffs_epfile_io(), if function unbind occurs, ffs_func_unbind() will
kfree ffs ep, once the task wake up, it still dereference the ffs ep to
obtain the request status.

Fix it by moving the request status to io_data which is stack-safe.

Cc: <stable@vger.kernel.org> # 5.15
Reported-by: Michael Wu <michael@allwinnertech.com>
Tested-by: Michael Wu <michael@allwinnertech.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1654863478-26228-2-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe

commit 4757c9ade34178b351580133771f510b5ffcf9c8 upstream.

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.

Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdnsp: Fixed setting last_trb incorrectly

commit 5c7578c39c3fffe85b7d15ca1cf8cf7ac38ec0c1 upstream.

When ZLP occurs in bulk transmission, currently cdnsp will set last_trb
for the last two TRBs, it will trigger an error "ERROR Transfer event TRB
DMA ptr not part of current TD ...".

Fixes: e913aada0683 ("usb: cdnsp: Fixed issue with ZLP")
Cc: stable <stable@kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Jing Leng <jleng@ambarella.com>
Link: https://lore.kernel.org/r/20220609021134.1606-1-3090101217@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix memory leak in dwc2_hcd_init

commit 3755278f078460b021cd0384562977bf2039a57a upstream.

usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this.

Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()")
Cc: stable <stable@kernel.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_ti: add Agilent E5805A support

commit 908e698f2149c3d6a67d9ae15c75545a3f392559 upstream.

Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti.

Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Cinterion MV31 with new baseline

commit 158f7585bfcea4aae0ad4128d032a80fec550df1 upstream.

Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.

Below is test evidence:
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b8 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B8 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b9 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B9 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

For PID 00b8, interface 3 is GNSS port which don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com
[ johan: rename defines using a "2" infix ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: memneq - move into lib/

commit abfed87e2a12bd246047d78c01d81eb9529f1d06 upstream.

This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.

This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:

  lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
  curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'

Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi: vmk80xx: fix expression for tx buffer size

commit 242439f7e279d86b3f73b5de724bc67b2f8aeb07 upstream.

The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`).  Fix it.

Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow")
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 4.9+
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add raptor lake point S DID

commit 3ed8c7d39cfef831fe508fc1308f146912fa72e6 upstream.

Add Raptor (Point) Lake S device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220606144225.282375-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hbm: drop capability response on early shutdown

commit 68553650bc9c57c7e530c84e5b2945e9dfe1a560 upstream.

Drop HBM responses also in the early shutdown phase where
the usual traffic is allowed.
Extend the rule that drop HBM responses received during the shutdown
phase by also in MEI_DEV_POWERING_DOWN state.
This resolves the stall if the driver is stopping in the middle
of the link initialization or link reset.

Drop the capabilities response on early shutdown.

Fixes: 6d7163f2c49f ("mei: hbm: drop hbm responses on early shutdown")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220606144225.282375-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: Use standard optional ref clock implementation

[ Upstream commit 27071b5cbca59d8e8f8750c199a6cbf8c9799963 ]

Even though the DW I2C controller reference clock source is requested by
the method devm_clk_get() with non-optional clock requirement the way the
clock handler is used afterwards has a pure optional clock semantic
(though in some circumstances we can get a warning about the clock missing
printed in the system console). There is no point in reimplementing that
functionality seeing the kernel clock framework already supports the
optional interface from scratch. Thus let's convert the platform driver to
using it.

Note by providing this commit we get to fix two problems. The first one
was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for
an interface clock"). It causes not having the interface clock (pclk)
enabled/disabled in case if the reference clock isn't provided. The second
problem was first introduced in commit b33af11de236 ("i2c: designware: Do
not require clock when SSCN and FFCN are provided"). Since that
modification the deferred probe procedure has been unsupported in case if
the interface clock isn't ready.

Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock")
Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Fix balance_push() vs __sched_setscheduler()

[ Upstream commit 04193d590b390ec7a0592630f46d559ec6564ba1 ]

The purpose of balance_push() is to act as a filter on task selection
in the case of CPU hotplug, specifically when taking the CPU out.

It does this by (ab)using the balance callback infrastructure, with
the express purpose of keeping all the unlikely/odd cases in a single
place.

In order to serve its purpose, the balance_push_callback needs to be
(exclusively) on the callback list at all times (noting that the
callback always places itself back on the list the moment it runs,
also noting that when the CPU goes down, regular balancing concerns
are moot, so ignoring them is fine).

And here-in lies the problem, __sched_setscheduler()'s use of
splice_balance_callbacks() takes the callbacks off the list across a
lock-break, making it possible for, an interleaving, __schedule() to
see an empty list and not get filtered.

Fixes: ae7927023243 ("sched: Optimize finish_lock_switch()")
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Link: https://lkml.kernel.org/r/20220519134706.GH2578@worktop.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/realtek-rtl: Fix refcount leak in map_interrupts

[ Upstream commit eff4780f83d0ae3e5b6c02ff5d999dc4c1c5c8ce ]

of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function doesn't call of_node_put() in error path.
Call of_node_put() directly after of_property_read_u32() to cover
both normal path and error path.

Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-7-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions

[ Upstream commit fa1ad9d4cc47ca2470cd904ad4519f05d7e43a2b ]

of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions

[ Upstream commit ec8401a429ffee34ccf38cebf3443f8d5ae6cb0d ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
When kcalloc fails, it missing of_node_put() and results in refcount
leak. Fix this by goto out_put_node label.

Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic/realview: Fix refcount leak in realview_gic_of_init

[ Upstream commit f4b98e314888cc51486421bcf6d52852452ea48b ]

of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 82b0a434b436 ("irqchip/gic/realview: Support more RealView DCC variants")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: npcm7xx: Add check for platform_driver_register

[ Upstream commit 6ba12b56b9b844b83ed54fb7ed59fb0eb41e4045 ]

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

faddr2line: Fix overlapping text section failures, the sequel

[ Upstream commit dcea997beed694cbd8705100ca1a6eb0d886de69 ]

If a function lives in a section other than .text, but .text also exists
in the object, faddr2line may wrongly assume .text.  This can result in
comically wrong output.  For example:

  $ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c
  enter_from_user_mode+0x1c/0x30:
  find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40
  (inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504

Fix it by passing the section name to addr2line, unless the object file
is vmlinux, in which case the symbol table uses absolute addresses.

Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/7d25bc1408bd3a750ac26e60d2f2815a5f4a8363.1654130536.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Fix handling of offline queues in blk_mq_alloc_request_hctx()

[ Upstream commit 14dc7a18abbe4176f5626c13c333670da8e06aa1 ]

This patch prevents that test nvme/004 triggers the following:

UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
 show_stack+0x52/0x58
 dump_stack_lvl+0x49/0x5e
 dump_stack+0x10/0x12
 ubsan_epilogue+0x9/0x3b
 __ubsan_handle_out_of_bounds.cold+0x44/0x49
 blk_mq_alloc_request_hctx+0x304/0x310
 __nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
 nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
 nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
 nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
 nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
 nvmf_dev_write+0xae/0x111 [nvme_fabrics]
 vfs_write+0x144/0x560
 ksys_write+0xb7/0x140
 __x64_sys_write+0x42/0x50
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 20e4d8139319 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

init: Initialize noop_backing_dev_info early

[ Upstream commit 4bca7e80b6455772b4bf3f536dcbc19aac424d6a ]

noop_backing_dev_info is used by superblocks of various
pseudofilesystems such as kdevtmpfs. After commit 10e14073107d
("writeback: Fix inode->i_io_list not be protected by inode->i_lock
error") this broke because __mark_inode_dirty() started to access more
fields from noop_backing_dev_info and this led to crashes inside
locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty().
Fix the problem by initializing noop_backing_dev_info before the
filesystems get mounted.

Fixes: 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error")
Reported-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-and-tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

certs/blacklist_hashes.c: fix const confusion in certs blacklist

[ Upstream commit 6a1c3767d82ed8233de1263aa7da81595e176087 ]

This file fails to compile as follows:

  CC      certs/blacklist_hashes.o
certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes]
    4 | const char __initdata *const blacklist_hashes[] = {
      | ^~~~~
In file included from certs/blacklist_hashes.c:2:
certs/blacklist.h:5:38: note: previous declaration here
    5 | extern const char __initconst *const blacklist_hashes[];
      |                                      ^~~~~~~~~~~~~~~~

Apply the same fix as commit 2be04df5668d ("certs/blacklist_nohashes.c:
fix const confusion in certs blacklist").

Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: ftrace: consistently handle PLTs.

[ Upstream commit a6253579977e4c6f7818eeb05bf2bc65678a7187 ]

Sometimes it is necessary to use a PLT entry to call an ftrace
trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(),
with each having *almost* identical logic, but this is not handled by
ftrace_modify_call() since its introduction in commit:

  3b23e4991fb66f6d ("arm64: implement ftrace with regs")

Due to this, if we ever were to call ftrace_modify_call() for a callsite
which requires a PLT entry for a trampoline, then either:

a) If the old addr requires a trampoline, ftrace_modify_call() will use
   an out-of-range address to generate the 'old' branch instruction.
   This will result in warnings from aarch64_insn_gen_branch_imm() and
   ftrace_modify_code(), and no instructions will be modified. As
   ftrace_modify_call() will return an error, this will result in
   subsequent internal ftrace errors.

b) If the old addr does not require a trampoline, but the new addr does,
   ftrace_modify_call() will use an out-of-range address to generate the
   'new' branch instruction. This will result in warnings from
   aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace
   the 'old' branch with a BRK. This will result in a kernel panic when
   this BRK is later executed.

Practically speaking, case (a) is vastly more likely than case (b), and
typically this will result in internal ftrace errors that don't
necessarily affect the rest of the system. This can be demonstrated with
an out-of-tree test module which triggers ftrace_modify_call(), e.g.

| # insmod test_ftrace.ko
| test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024
| branch_imm_common: offset out of range
| branch_imm_common: offset out of range
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace]
|  actual:   1d:00:00:94
| Updating ftrace call site to call a different ftrace function
| ftrace record flags: e0000002
|  (2) R
|  expected tramp: ffffb374ae42ed54
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0
| Modules linked in: test_ftrace(+)
| CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13
| Hardware name: linux,dummy-virt (DT)
| pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x280/0x2b0
| lr : ftrace_bug+0x280/0x2b0
| sp : ffff80000839ba00
| x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0
| x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000
| x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8
| x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff
| x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4
| x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8
| x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167
| x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022
| Call trace:
|  ftrace_bug+0x280/0x2b0
|  ftrace_replace_code+0x98/0xa0
|  ftrace_modify_all_code+0xe0/0x144
|  arch_ftrace_update_code+0x14/0x20
|  ftrace_startup+0xf8/0x1b0
|  register_ftrace_function+0x38/0x90
|  test_ftrace_init+0xd0/0x1000 [test_ftrace]
|  do_one_initcall+0x50/0x2b0
|  do_init_module+0x50/0x1f0
|  load_module+0x17c8/0x1d64
|  __do_sys_finit_module+0xa8/0x100
|  __arm64_sys_finit_module+0x2c/0x3c
|  invoke_syscall+0x50/0x120
|  el0_svc_common.constprop.0+0xdc/0x100
|  do_el0_svc+0x3c/0xd0
|  el0_svc+0x34/0xb0
|  el0t_64_sync_handler+0xbc/0x140
|  el0t_64_sync+0x18c/0x190
| ---[ end trace 0000000000000000 ]---

We can solve this by consistently determining whether to use a PLT entry
for an address.

Note that since (the earlier) commit:

  f1a54ae9af0da4d7 ("arm64: module/ftrace: intialize PLT at load time")

... we can consistently determine the PLT address that a given callsite
will use, and therefore ftrace_make_nop() does not need to skip
validation when a PLT is in use.

This patch factors the existing logic out of ftrace_make_call() and
ftrace_make_nop() into a common ftrace_find_callable_addr() helper
function, which is used by ftrace_make_call(), ftrace_make_nop(), and
ftrace_modify_call(). In ftrace_make_nop() the patching is consistently
validated by ftrace_modify_code() as we can always determine what the
old instruction should have been.

Fixes: 3b23e4991fb6 ("arm64: implement ftrace with regs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: ftrace: fix branch range checks

[ Upstream commit 3eefdf9d1e406f3da47470b2854347009ffcb6fa ]

The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.

This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.

If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.

If an in-range branch were erroeously rejected, then:

* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
  use of a PLT entry, which is benign.

  Note that this is the common case, as this is selected by
  CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
  which distributions typically seelct. This is also selected by
  CONFIG_ARM64_ERRATUM_843419.

* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
  internal ftrace failures.

* For core kernel text, this would result in internal ftrace failues.

  Note that for this to happen, the kernel text would need to be at
  least 128M bytes in size, and typical configurations are smaller tha
  this.

Fix this by calculating the offset *from* the branch *to* the target in
both functions.

Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg

[ Upstream commit 219b51a6f040fa5367adadd7d58c4dda0896a01d ]

The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock
and block until it receives a packet from the remote. If the client
doesn`t connect to server and calls read() directly, it will not
receive any packets forever. As a result, the deadlock will happen.

The fail log caused by deadlock is shown below:

[  369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds.
[  369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  369.613058] Call Trace:
[  369.613315]  <TASK>
[  369.614072]  __schedule+0x2f9/0xb20
[  369.615029]  schedule+0x49/0xb0
[  369.615734]  __lock_sock+0x92/0x100
[  369.616763]  ? destroy_sched_domains_rcu+0x20/0x20
[  369.617941]  lock_sock_nested+0x6e/0x70
[  369.618809]  ax25_bind+0xaa/0x210
[  369.619736]  __sys_bind+0xca/0xf0
[  369.620039]  ? do_futex+0xae/0x1b0
[  369.620387]  ? __x64_sys_futex+0x7c/0x1c0
[  369.620601]  ? fpregs_assert_state_consistent+0x19/0x40
[  369.620613]  __x64_sys_bind+0x11/0x20
[  369.621791]  do_syscall_64+0x3b/0x90
[  369.622423]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  369.623319] RIP: 0033:0x7f43c8aa8af7
[  369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[  369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7
[  369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005
[  369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700
[  369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe
[  369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700

This patch replaces skb_recv_datagram() with an open-coded variant of it
releasing the socket lock before the __skb_wait_for_more_packets() call
and re-acquiring it after such call in order that other functions that
need socket lock could be executed.

what's more, the socket lock will be released only when recvmsg() will
block and that should produce nicer overall behavior.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reported-by: Thomas Habets <thomas@@habets.se>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bgmac: Fix an erroneous kfree() in bgmac_remove()

[ Upstream commit d7dd6eccfbc95ac47a12396f84e7e1b361db654b ]

'bgmac' is part of a managed resource allocated with bgmac_alloc(). It
should not be freed explicitly.

Remove the erroneous kfree() from the .remove() function.

Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum_cnt: Reorder counter pools

[ Upstream commit 4b7a632ac4e7101ceefee8484d5c2ca505d347b3 ]

Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.

In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)

Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.

Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>