summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
David Herrmann [Fri, 30 Dec 2011 17:01:00 +0000 (18:01 +0100)]
terminal: add dummy terminal implementation
vte: This adds a dummy VTE subsystem. It will be used to emulate a vt100
terminal based on our console subsystem.
terminal: This ties together several subsystems including the output-, the
console- and the vte-subsystem.
The test_terminal test application can be used to test the terminal. It is
supposed to provide a full vt100 implementation which is displayed on all
available screens.
Most of the functionality here is not implemented yet and only a dummy function.
These will be added in later commits.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 30 Dec 2011 16:13:15 +0000 (17:13 +0100)]
output: add debug and error messages
Print useful debug and error messages to the global log file.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 30 Dec 2011 16:08:01 +0000 (17:08 +0100)]
console: fix debug messages for buffer objects
It doesn't make sense to print the size of new buffer objects as the resize
function does the same. We also currently access uninitialized memory here so it
is useless anyway.
Also move the message of the unref function to be consistent with other objects.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 30 Dec 2011 15:48:20 +0000 (16:48 +0100)]
test_console: fix call to kmscon_comp*_use
We should activate the GL context on initialization to allow other subsystems to
create GL objects.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 30 Dec 2011 15:44:28 +0000 (16:44 +0100)]
test_output: handle kmscon_comp*_use failure
Move the call before the wakeup and also check its return code.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 30 Dec 2011 15:40:49 +0000 (16:40 +0100)]
output: allow kmscon_compositor_use to be called when asleep
There is no reason to prohibit a compositor from activating its GL context while
being asleep. It is even recommended to activate the GL context when being
asleep as there is no other way to initialize other subsystems without an GL
context.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 30 Dec 2011 15:36:48 +0000 (16:36 +0100)]
output: fix dropping master priviledges on wakeup
If wakeup fails we should drop master priviledges again, otherwise we might
break other applications.
Also remove the SetMaster call on compositor initialization. It is redundant and
not needed by us.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 30 Dec 2011 12:47:36 +0000 (13:47 +0100)]
vt: fix race-condition in signal handling
Currently, we set up our VT with SIGUSR1/2 signals and after that the user may
connect the signal handlers to the eloop. However, if we receive a signal in
between, the signal gets lost.
Therefore, this simply merges the kmscon_vt_connect_eloop function into
kmscon_vt_open as there is no obvious reason to split them.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 20:30:37 +0000 (21:30 +0100)]
output: add helper to check whether output is awake
If we have only an output but not the related compositor we currently cannot
figure out whether this output is awake. This adds such a helper function.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 13:46:22 +0000 (14:46 +0100)]
test_console: fix console deinitialization bug
We must not destroy the compositor object if there is still a console using the
GL context. Otherwise we get a SEGFAULT when calling any gl* function.
In future we may need propoper dependencies here. We use reference counts so
this should be easy to implement.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 13:27:03 +0000 (14:27 +0100)]
test_console: copy stdin to console output
Add new fd to eloop that copies stdin to console output.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 13:24:31 +0000 (14:24 +0100)]
console: add newline function
kmscon_console_newline() can be used to produce a newline. Writing \n doesn't
work as this would write \n as character into the cell and not produce a
newline.
The console does not perform any parsing so we provide a separate function.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 12:59:50 +0000 (13:59 +0100)]
Update TODO
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 11:48:36 +0000 (12:48 +0100)]
console: remove +1 font width
This was to avoid rounding errors but seems to be useless now so remove it.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 11:45:54 +0000 (12:45 +0100)]
console: calculate width by font
Remove the *_set_res() function entirely. Instead, the *_resize() function now
accepts a height argument which is used as quality hint. Internally, we compute
the texture width by the selected font plus the given height. This simplifies
the API and the internal handling and improves output on non-standard
resolutions or with non-standard fonts.
Until now it was only optimized for my 16x9 output but 5x4 output was quite
garbled.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Mon, 26 Dec 2011 11:15:48 +0000 (12:15 +0100)]
console: do not resize buffer if size doesn't change
We shouldn't do anything if buffer_resize is called with the same size. This
also suppresses useless "buffer resized to XxY" debug messages.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 24 Dec 2011 11:46:56 +0000 (12:46 +0100)]
console: measure font width
When creating a new font we automatically measure the average width of a
character. This allows us to draw fonts even on weird resolutions.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 24 Dec 2011 11:30:42 +0000 (12:30 +0100)]
console: do not return NULL in kmscon_char_get_u8
A kmscon_char has always a valid buffer so we can always return a valid pointer.
The user shouldn't use it if length is 0 but it's not our job to prohibit that.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Wed, 21 Dec 2011 15:39:51 +0000 (16:39 +0100)]
console: allow resizing the console
Forward resizing requests to the buffer but correctly update our size cache and
the cursor position.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Wed, 21 Dec 2011 15:30:06 +0000 (16:30 +0100)]
console: support writing to console
Add kmscon_console_write() to write a character to the current position of the
cursor. The cursor is automatically moved to the next cell.
Also extend the test_console example to use this new function.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Wed, 21 Dec 2011 15:07:40 +0000 (16:07 +0100)]
console: correctly resize lines
When resizing lines we shouldn't drop all information. Instead we only
initialize new cells.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Wed, 21 Dec 2011 14:44:24 +0000 (15:44 +0100)]
test_buffer: add buffer playground
This test app is used to stress test the buffer implementation and finding bugs
of the scrollback-buffer rotations etc.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Wed, 21 Dec 2011 13:19:52 +0000 (14:19 +0100)]
console: rewrite buffer implementation
We now use a proper cache for the current screen and a linked list for the
scrollback buffer. This allows fast rotations and fast access.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Tue, 20 Dec 2011 20:40:35 +0000 (21:40 +0100)]
console: remove cairo from header
There is no reason to make all tests/* apps need cairo dependencies. We pass
this parameter internally so we can safely use void*.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 18 Dec 2011 12:49:03 +0000 (13:49 +0100)]
console: correctly set current position in buffer
Our scrollback buffer needs to adjust the current position when being resized or
when a new line is pushed.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 18 Dec 2011 11:58:47 +0000 (12:58 +0100)]
console: use new buffer implementation
Use the new kmscon_buffer in the console subsystem.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 18 Dec 2011 11:23:14 +0000 (12:23 +0100)]
console: remove buffer cache
Unless we benchmark the buffer implementation we shouldn't implement
speedup-hacks. Therefore, remove the buffer-cache and look how it works out.
This simplifies buffer handling alot.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 18 Dec 2011 10:46:08 +0000 (11:46 +0100)]
console: allow resetting of kmscon_char's
Resetting a char should never fail so we provide a separate function that sets a
char to its default value.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Wed, 14 Dec 2011 17:09:03 +0000 (18:09 +0100)]
Add config.h.in~ to gitignore
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Ran Benita [Mon, 12 Dec 2011 20:37:07 +0000 (22:37 +0200)]
build: set in NDEBUG instead of DEBUG in configure
Signed-off-by: Ran Benita <ran234@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Ran Benita [Sat, 10 Dec 2011 23:56:48 +0000 (01:56 +0200)]
vt: add support for automatic VT switching
Add two functions to enter/leave our VT object. This allows to
implement to expected behavior of automatically switching to the kmscon
when it is running on a new tty, and switching back to the tty we came
from when the program finishes. Presumably this behavior will be
controlled by a config variable or command line argument later on (like
Xorg's -novtswitch).
There's a bit of a subtlety in this because of VT_PROCESS. We need
permission from ourselves to switch in/out of out VT; this is done when
processing SIGUSR[12] in the eloop. We therefore must dispatch the loop
at least once after switching out. The usual case is demonstrated in
test_vt.c.
Signed-off-by: Ran Benita <ran234@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Wed, 14 Dec 2011 14:38:26 +0000 (15:38 +0100)]
Add K_OFF to vt-TODO
See https://github.com/dvdhrm/kmscon/pull/3 for a discussion of K_OFF in the VT
subsystem. We cannot apply it now but we have to reconsider it when the input
subsystem has been written.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Ran Benita [Fri, 2 Dec 2011 12:01:12 +0000 (14:01 +0200)]
build: a few fixes to configure script
- Use C99 and gnu extensions.
- Explicitly link against libdrm (more strict linkers like gold would
complain).
- Consistently use *_CPPFLAGS where due.
- Clear the default CFLAGS.
Signed-off-by: Ran Benita <ran234@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 4 Dec 2011 16:56:43 +0000 (17:56 +0100)]
Console: Add buffer object
The buffer object manages the cells and scrollback buffer. It is optimized for
speed: fast rotations, fast resize, etc.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 17:09:41 +0000 (18:09 +0100)]
Console: Simplify character handling
We add a new helper to initialize a new character directly to avoid two
allocations. This also refactors the character code and simplifies it alot.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 15:49:44 +0000 (16:49 +0100)]
test_console: Use new eloop and VT subsystem
The test_console application now supports VT-switching and monitor-hotplug. New
monitors are detected when switching VTs. Full hotplug-support will be added
later.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 15:39:06 +0000 (16:39 +0100)]
Output: Correctly acquire/release DRM master
If we switch VT, we must release DRM master to allow other applications to
access the DRM. When waking up the compositor we try to acquire the master again
to access the DRM.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 15:38:14 +0000 (16:38 +0100)]
Eloop: Fix function name typo
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 14:14:38 +0000 (15:14 +0100)]
Fix gitignore
We currently ignore all test sources. Restrict the filter to the root directory
so only the binaries are affected.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 14:14:18 +0000 (15:14 +0100)]
Add VT test
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 14:09:10 +0000 (15:09 +0100)]
Eloop: Add debug statements
Add some more debug statements to allow easier eloop monitoring.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 14:08:18 +0000 (15:08 +0100)]
Add VT handling
As long as we are run in a VT we need to correctly handle VT-switches to avoid
blocking the crtc/input.
This is copied from wayland-compositor demos and modified to fit to our needs.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 11:22:36 +0000 (12:22 +0100)]
Eloop: Pass mask argument to fd callbacks
fd-callbacks are pretty useless if we do not pass a mask argument with the
current flags.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 11:04:29 +0000 (12:04 +0100)]
Eloop: Add idle-event support
Idle events are dispatched everytime kmscon_eloop_dispatch() is called. To allow
the callbacks to add/remove/modify all current idle events (including themself),
we need to keep a pointer to the currently dispatched event.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 3 Dec 2011 10:42:41 +0000 (11:42 +0100)]
Add event loop
Add event loop implementation with support for fd's and signal's through
signalfd.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 14:33:52 +0000 (15:33 +0100)]
test_output: Use log API
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 14:27:01 +0000 (15:27 +0100)]
Output: Choose sane default mode
We currently use the first mode in the list if no mode is explicitely specified
by the caller. However, this is most often the lowest available resolution
reported by the kernel.
This patch adds a new pointer to every output which remembers a sane default.
This is currently the first mode reported by the kernel but may later be
optimized to choose a better default mode.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 14:16:14 +0000 (15:16 +0100)]
test_output: Use new log API
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 14:15:05 +0000 (15:15 +0100)]
Add log API
We simply forward all log messages to stderr. We use syslog/prink-like severity
prefixes. Use systemd or alike to forward stderr to syslog, kernel-log or
similar.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 14:10:07 +0000 (15:10 +0100)]
test_output: Catch SIGINT and SIGTERM
Correctly handle SIGINT and SIGTERM. This will also reset the crtc so it won't
stay black if the application is killed.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 13:35:33 +0000 (14:35 +0100)]
test_console: React on SIGINT
Correctly terminate the application on SIGINT so the CRTC gets reset.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 12:31:12 +0000 (13:31 +0100)]
Update documentation about autotools
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Fri, 2 Dec 2011 12:23:22 +0000 (13:23 +0100)]
Change license to MIT license
Further commits will need a Signed-off-by line, otherwise I cannot accept them.
MIT license is compatible with GPL so we still can switch to GPL in the future
if we want.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Thu, 1 Dec 2011 17:33:49 +0000 (18:33 +0100)]
Console: Fix cell-selection when drawing glyphs
We didn't calculate the correct cell number when drawing a cell. Fix that.
Reported-by: Ran Benita <ran234@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Thu, 1 Dec 2011 17:20:54 +0000 (18:20 +0100)]
Update TODO
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Ran Benita [Mon, 28 Nov 2011 22:27:30 +0000 (00:27 +0200)]
output: save and restore crtc upon (de)activation
The crtc is saved from kmscon_output_activate, and restored from
kmscon_output_deactivate.
This means that when the program exits, the screen is back to what it
was - we don't need to switch back VTs if we started the program from an
fbcon, etc.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Ran Benita [Sun, 27 Nov 2011 17:09:26 +0000 (19:09 +0200)]
Output: Fix warning -Wall complains about
Signed-off-by: Ran Benita <ran234@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Ran Benita [Sun, 27 Nov 2011 17:08:36 +0000 (19:08 +0200)]
gitignore: add all the build stuff
Signed-off-by: Ran Benita <ran234@gmail.com>
Ran Benita [Sun, 27 Nov 2011 16:54:53 +0000 (18:54 +0200)]
build: use gnu autotools
This commit adds basic autoconf + automake files to build the project.
It also adds a main.c stub in order to simulate the main binary.
The configure script uses pkg-config to find the libraries. The usual
stuff should work. The only additional option right now is:
./configure --enable-debug [To enable debugging symbols]
The Makefile should also support the standard stuff:
make [To build the kmscon binary]
make check [To build the test_* binaries]
make dist [To create a tarball]
make clean
make install
etc.
To start from a clean tree (e.g. git clean -dfx), do something like the
following:
./autogen.sh
./configure --enable-debug CFLAGS=-O0
make
It all should work well enough for now.
Signed-off-by: Ran Benita <ran234@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 27 Nov 2011 18:31:26 +0000 (19:31 +0100)]
Add kmscon_console_write() function
This function can be used to change the content of the current cell. It
automatically moves the cursor to the next cell.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 27 Nov 2011 15:10:11 +0000 (16:10 +0100)]
Add kmscon_char_set() helper
This helper allows to copy one char into another.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 27 Nov 2011 14:50:59 +0000 (15:50 +0100)]
Add cursor movement helpers
Add functions to move the cursor of a console.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 16:59:49 +0000 (17:59 +0100)]
Update TODO
Similar to libvte we could speed up font-drawing by using cairo_scaled_font_t to
bypass pango entirely if a glyph is already in the hash-table.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 16:54:56 +0000 (17:54 +0100)]
Support glyph string caching
To avoid redrawing the whole layout every time, we now support caching a single
glyph-string if it consists of only one run.
This should speed up drawing considerably. We still support drawing the whole
layout as fall-back method.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 16:53:45 +0000 (17:53 +0100)]
Fix glyph caching
We need to use memcmp() not memcpy() to compare two kmscon_char's.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 16:12:17 +0000 (17:12 +0100)]
Calculate font size properly
We set the font size to the absolute size we have per cell instead of using a
fixed font-size.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 16:04:52 +0000 (17:04 +0100)]
Set console resolution to 800x600 by default
This sets the console resolution to 800x600 on startup. We no longer have a
console with an invalid resolution after startup so we now can start calculating
font sizes properly.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 15:55:25 +0000 (16:55 +0100)]
Fix test_console
Correctly set locale on startup and sleep for one second after each redraw to
reduce CPU consumption.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 15:54:40 +0000 (16:54 +0100)]
Draw console
Properly draw all cells of a console on redraw.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 15:48:59 +0000 (16:48 +0100)]
Reset cairo surface when drawing console
We must use SOURCE operator to reset the surface. Otherwise, we end up doing
nothing here because our alpha value is 0.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 15:47:50 +0000 (16:47 +0100)]
Set each cell to '?' for testing purposes
Each cell of a console is initialized to '?' to allow testing the glyph
operations.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 15:46:44 +0000 (16:46 +0100)]
Refresh texture when redrawing console
We need to refresh the GL texture data when redrawing the console. Otherwise, we
always end up with the first frame mapped onto the GL quad object.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 15:43:17 +0000 (16:43 +0100)]
Create font when resizing console
When resizing a kmscon_console object we automatically create a new font because
all cached objects get invalid now.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 15:33:06 +0000 (16:33 +0100)]
Add kmscon_font type
A kmscon_font object is used to store the current font information. It allows to
draw any kind of UTF-8 string to the screen. Internally, it uses kmscon_glyph to
store glyph information for every character that has been drawn so redrawing it
is much faster.
Currently, we only support GLYPH_LAYOUT as caching method which is quite slow.
However, it supports any kind of input and always works. Better and faster
caching algorithms like cairo_scaled_font_t will be added later.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 14:29:39 +0000 (15:29 +0100)]
Add pango dependency
We use pango to draw fonts. This requires glib and cairo support, too.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 26 Nov 2011 14:27:10 +0000 (15:27 +0100)]
Add kmscon_char_dup()
Add helper function to duplicate a kmscon_char object.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 17:27:44 +0000 (18:27 +0100)]
Add gitignore file
Ignore swap files and binaries.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 17:25:59 +0000 (18:25 +0100)]
Set default console size to 80x24
Create for every new console a default cell-size of 80x24.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 17:21:41 +0000 (18:21 +0100)]
Add cells to console objects
A console has a fixed line and column count. Each entry is represented by a
kmscon_cell object. The console can be resized on the fly.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 17:18:22 +0000 (18:18 +0100)]
Compile all sources into tests
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 17:02:28 +0000 (18:02 +0100)]
Update TODO list with console subsystem
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 16:58:32 +0000 (17:58 +0100)]
Add console subsystem to README
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 16:55:57 +0000 (17:55 +0100)]
Add console test
This test application prints a console on all connected outputs. It does not
emulate any terminal but instead just prints the test-console.
It can be used to test the console subsystem in connection with the DRM/KMS
output subsystem.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 16:49:21 +0000 (17:49 +0100)]
Add console drawing-logic
A console may be displayed on multiple outputs. We allow different screen
resolutions on these outputs so we need a way to map the console image onto
different outputs.
We simply render the console image into a cairo surface with a user-given
resolution. This should be set to the highest resultion of the used outputs. The
application can now map this image onto the different framebuffers. This will
scale the image if the target framebuffer is smaller than the cairo surface.
We also do not clear the framebuffer. This should be done by the user. This
allows us to draw with alpha values and blend the console on top of the current
framebuffer. We do not have to care for background images and the application
has full control of where the console is shown.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 14:47:23 +0000 (15:47 +0100)]
Fix kmscon_console_unref name
The name of the unref function was wrong. Fix this from kmscon_con_unref to
kmscon_console_unref.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 14:46:22 +0000 (15:46 +0100)]
Avoid refreshing twice in output test
Waking up the compositor automatically refreshed the output list. Therefore,
avoid refreshing it manually again.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sun, 20 Nov 2011 13:44:39 +0000 (14:44 +0100)]
Add kmscon_char type
Every cell of the console contains one single printable character. We want to be
Unicode compatible so we must support combined characters. Hence, each cell
consists of a UTF-8 string that can be drawn by pango as a single glyph.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 19 Nov 2011 23:41:15 +0000 (00:41 +0100)]
Add console subsystem dummy
Add dummy files for the console subsystem. This subsystem will be used to draw a
console to a framebuffer. It uses pango and cairo for text-rendering and will
provide all required modification functions that the terminal emulation will
require.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 19 Nov 2011 23:28:53 +0000 (00:28 +0100)]
Add TODO list
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 19 Nov 2011 23:21:49 +0000 (00:21 +0100)]
Add temporary Makefile
This makefile can be used to build kmscon and the test suite. It is quite rough
and will later or sooner be replaced by a proper build-tool like autotools.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 19 Nov 2011 23:16:27 +0000 (00:16 +0100)]
Add output test-script
The test_output application is an example how to use the output subsystem. It
lists all connected monitors/DRM-outputs and draws with OpenGL on the selected
framebuffers.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 19 Nov 2011 23:09:39 +0000 (00:09 +0100)]
Add output subsystem
The output subsystem manages the connected monitors, provides framebuffers and
OpenGL contexts and handles all DRM/DRI/KMS related functionality.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
David Herrmann [Sat, 19 Nov 2011 22:05:38 +0000 (23:05 +0100)]
New kmscon project
The kmscon application is a terminal emulator which runs on a native linux DRI
device. It uses linux KMS and DRI to get a working OpenGL context without the
need of an X-Server, Wayland or similar.
It is an attempt to replace the in-kernel VT emulator with a full userspace
console.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>