iio: light: tsl2772: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

While at it, reuse temporary device pointer in the same function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413181402.19582-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: ping: Replace OF specific code by device_get_match_data()

Instead of calling the OF specific API, use device_get_match_data().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413183421.20427-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: magnetometer: ak8974: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413184502.20998-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: cm3605: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413184627.21125-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: max31856: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add missing mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413185044.21588-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: dmard06: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413190327.30054-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: afe: rescale: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413190117.29814-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: dpot: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413190632.30365-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: lpc18xx: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413190819.38206-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: vf610: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220413191611.46204-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: bmi160: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

While at it, reuse temporary device pointer in the same function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220414131804.25227-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl355: use fwnode_irq_get_byname()

Use the generic fwnode_irq_get_byname() in place of of_irq_get_byname()
to get the IRQ number from the interrupt pin.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20211109200840.135019-3-puranjay12@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhx device bindings

Add device bindings for asm330lhhx IMU sensor.
Use lsm6dsr as fallback device for asm330lhhx since it implements all
the features currently supported by asm330lhhx.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/2e5304b7e11085d4e701b4b591fd79cc54f01301.1649100168.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add support to ASM330LHHX

Add support to STM ASM330LHHX (acc + gyro) automotive Mems sensor.
The ASM330LHHX sensor can use LSM6DSR as fallback device since it
implements all the ASM330LHHX features currently implemented in
st_lsm6dsx.

Datasheet: https://www.st.com/resource/en/datasheet/asm330lhhx.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/04e2644772a6761a25c36bb9679979567fdebda3.1649100168.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: add ad3552r

Add an entry for the ad3552r DAC driver.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220404085000.249423-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: dac: change ad3552r maintainer

As the maintainer email no longer exists, change it to myself.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220404085000.249423-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7266: convert probe to full device-managed

Convert probe functions to device-managed variants, with exception of
the regulator, which required a devm_add_action_or_reset() hook
registration.

Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/20220407115621.10781-1-maira.canal@usp.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Replace strtobool() with kstrtobool()

strtobool() is deprecated and just a wrapper around kstrtobool().Replace
it with kstrtobool() so the deprecated function can be removed eventually.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Clarify the modes

As part of a previous discussion with Jonathan Cameron [1], it appeared
necessary to clarify the meaning of each mode so that new developers
could understand better what they should use or not use and when.

The idea of renaming these modes as been let aside because naming is a
big deal and requires a lot of thinking. So for now let's focus on
correctly explaining what each mode implies.

[1] https://lore.kernel.org/linux-iio/20210930165510.2295e6c4@jic23-huawei/

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-14-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Simplify the registration of kfifo buffers

Among all the users of the kfifo buffers, no one uses the
INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and
simplify a little bit the internals - overall the documentation - by
eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by
default with kfifo buffers, which will basically mimic what all the "non
direct" modes do.

Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jyoti Bhayana <jbhayana@google.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Move the currentmode entry to the opaque structure

This entry should, under no situation, be modified by device
drivers. Now that we have limited its read access to device drivers
really needing it and did so through a dedicated helper, we can
easily move this variable to the opaque structure in order to
prevent any further modification from non-authorized code (out of the
core, basically).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20220207143840.707510-12-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Hide read accesses to iio_dev->currentmode

In order to later move this variable within the opaque structure, let's
create a helper for accessing it in read-only mode. This helper will be
exposed to device drivers and kept accessible for the few that could need
it. The write access to this variable however should be fully reserved to
the core so in a second step we will hide this variable into the opaque
structure.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-11-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Un-inline iio_buffer_enabled()

As we are going to hide the currentmode inside the opaque structure,
this helper would soon need to call a non-inline function which would
simply drop the benefit of having the helper defined inline in a header.

One alternative is to move this helper in the core as there is no more
interest in defining it inline in a header. We will pay the minor cost
either way.

Let's do like the iio_device_id() helper which also refers to the opaque
structure and gets defined in the core.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-10-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevant

The st_sensors_core driver hardcodes the content of the
iio_device_claim_direct_mode() and iio_device_release_direct_mode()
helpers. Let's get rid of this handcrafted implementation and use the
proper core helpers instead. Additionally, this lowers the tab level
(which is always good) and prevents the use of the ->currentmode
variable which is not supposed to be used like this anyway.

Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-9-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: st_sensors: Stop abusing mlock to ensure internal coherency

An odr_lock has been introduced to protect local accesses to the odr
internal cache and ensure the cached value always reflected the actual
value. Using the mlock() for this purpose is no longer needed, so let's
drop these extra mutex_lock/unlock() calls.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-8-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: st_sensors: Add a local lock for protecting odr

Right now the (framework) mlock lock is (ab)used for multiple purposes:
1- protecting concurrent accesses over the odr local cache
2- avoid changing samplig frequency whilst buffer is running

Let's start by handling situation #1 with a local lock.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: st_sensors: Drop the protection on _avail functions

The use of a lock there seems pointless. Besides preventing to read
these information from userspace while buffers are enabled (which is not
supposed to happen), it only protect read accesses over static const
values, which are never supposed to be written anyway.

Drop these lock calls.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-6-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: st_sensors: Return as early as possible from the _write_raw() callbacks

As there is no cleanup to do, let's return as early as possible in the
various ST sensor drivers _write_raw() callback functions.

There is no functional change.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-5-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode

This is an internal variable of the core, let's use the
iio_buffer_enabled() helper which is exported for the following purpose:
telling if the current mode is a buffered mode, which is precisely what
this driver looks for.

Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220207143840.707510-4-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: magnetometer: rm3100: Stop abusing the ->currentmode

This is an internal variable for the core, here it is set to a "default"
value by the driver in order to later be able to perform checks against
it. None of this is needed because this check actually cares about the
buffers being enabled or not. So it is an unproper side-channel access
to the information "are the buffers enabled?", returned officially by
the iio_buffer_enabled() helper. Use this helper instead.

Cc: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-3-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Enhance the kernel doc of modes and currentmodes iio_dev entries

Let's provide more details about these two variables because their
understanding may not be straightforward for someone not used to the IIO
subsystem internal logic. The different modes will soon be also be more
documented for the same reason.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220207143840.707510-2-miquel.raynal@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Switch to read_avail

Replace sysfs attributes with read_avail() callback. This also permits
removal of ads1115_info, since the scale attribute tables are now part
of chip data.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20220328194725.149150-10-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Replace data_rate with chip data struct ads1015_data

Instead of storing only data_rate in private data, store pointer to the
whole chip data and use the data_rate from chip data throughout the driver.
No functional change. This is done in preparation for switching to
read_avail().

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-9-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Convert to OF match data

Replace chip type enumeration in match data with pointer to static constant
structure which contains all the different chip properties in one place, and
then replace handling of chip type in probe() with simple copy of fields in
the new match data structure into struct iio_dev.

This reduces code and increases static data.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-8-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Add static assert to test if shifted realbits fit into storagebits

Add compile-time static_assert wrapper to verify that shifted realbits
fit into storagebits. The macro is implemented in a more generic way so
it can be used to verify other values if required.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-7-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Add TLA2024 support

Add support for TI TLA2024 ADC. This chip is compatible with ADS1015
except it has no comparator in it, hence the comparator configuration
bits are missing in Configuration Register and the Hi_Thresh/Lo_Thresh
registers are missing as well and so is event support.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-6-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Make channel event_spec optional

Pass event_spec and num_event_specs to ADS1015_V_CHAN and ADS1015_V_DIFF_CHAN
macros, to make it possible to pass no event_spec at all for chips which have
no comparator and thus no events. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-5-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Deduplicate channel macros

These macros differ only in the number of valid bits of each ADC sample
and the shift of those bits, i.e. ADS1015 is 12bit ADC shifted by 4 left,
ADS1115 is 16bit ADC shifted by 0. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-4-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ti-ads1015: Switch to static const writeable ranges table

Switch the driver from code implementing test whether a regmap register
is writeable to static const tables describing the test. No functional
change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220328194725.149150-3-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: ti,ads1015: Add TLA2024 compatible string

Add ti,tla2024 compatible string. This device is compatible with
ADS1015 except it has no on-chip comparator.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220328194725.149150-2-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: ti,ads1015: Add missing ADS1115 compatible string

Add missing ti,ads1115 compatible string. This compatible string is
supported by the Linux kernel driver and the ads1015 is a 12bit ADC
while ads1115 is 16bit ADC. Add the missing compatible string.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20220328194725.149150-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Print error and fail iio_device_register() in case sample bits do not fit storage bits

Add runtime check to verify whether storagebits are at least as big
as shifted realbits. This should help spot broken drivers which may
set realbits + shift above storagebits.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20220328195307.154422-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: kxsd9-spi: changed leading spaces to tabs

Changed the leading spaces to tabs, in accordance with kernel coding
conventions, and removed trailing comma.
Found with checkpatch.

Signed-off-by: Paul Lemmermann <thepaulodoom@thepaulodoom.com>
Link: https://lore.kernel.org/r/YkInN6SL7pP2f5Sf@hp-amd-paul
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: dmard09: fixed code styling issues

Cleaning up code. Found with checkpatch.

Signed-off-by: Paul Lemmermann <thepaulodoom@thepaulodoom.com>
Link: https://lore.kernel.org/r/YkItIE5sp3P4sZdY@hp-amd-paul
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: sysfs-trigger: replace usage of found with dedicated list iterator variable

To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.

To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].

This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220331230632.957634-3-jakobkoschel@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: ssp_sensors: replace usage of found with dedicated list iterator variable

To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.

To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].

This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220331230632.957634-2-jakobkoschel@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: remove usage of list iterator variable for list_for_each_entry_continue_reverse()

In preparation to limit the scope of the list iterator variable to the
list traversal loop, use a dedicated pointer to iterate through the
list [1].

Since that variable should not be used past the loop iteration, a
separate variable is used to 'remember the current location within the
loop'.

To either continue iterating from that position or start a new
iteration (if the previous iteration was complete) list_prepare_entry()
is used.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220331230632.957634-1-jakobkoschel@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: palmas: shut up warning about calibration mismatch (due to noise)

Although technically checking for ADC values below 0 is correct,
because they are outside of the calibration values, there is usually
noise which spuriously fills the console log with error messages if
calculated input voltage gets close to 0V.

Ignore small negative calculated values, but clamp them to 0.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/1cee45bfc3fa2ab59dcc17242fb52468035360a1.1646743982.git.hns@goldelico.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7192: add sequencer support

Add sequencer support for AD7192.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-7-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7124: add sequencer support

Add sequencer support for AD7124.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-6-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad_sigma_delta: Add sequencer support

Some sigma-delta chips support sampling of multiple
channels in continuous mode.

When the operating with more than one channel enabled,
the channel sequencer cycles through the enabled channels
in sequential order, from first channel to the last one.
If a channel is disabled, it is skipped by the sequencer.

If more than one channel is used in continuous mode,
instruct the device to append the status to the SPI transfer
(1 extra byte) every time we receive a sample.
All sigma-delta chips possessing a sampling sequencer have
this ability. Inside the status register there will be
the number of the converted channel. In this way, even
if the CPU won't keep up with the sampling rate, it won't
send to userspace wrong channel samples.

When multiple channels are enabled in continuous mode,
the device needs to perform a measurement on all slots
before we can push to userspace the sample.

If, during sequencing and data reading, a channel measurement
is lost, a desync occurred. In this case, ad_sigma_delta drops
the incomplete sample and waits for the device to send the
measurement on the first active slot.

Co-developed-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20220322105029.86389-5-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7192: Add update_scan_mode

The callback .set_channel cannot be used to enable multiple
channels at once, only one is allowed simultaneously.

By adding an update_scan_mode callback, every time the
continuous mode is activated, channels will be enabled/disabled
accordingly.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-4-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7124: Add update_scan_mode

The callback .set_channel cannot be used to enable and
disable multiple channels at once as they are presented
in the active_scan_mask.

By adding an update_scan_mode callback, every time the
continuous mode is activated, channels will be
enabled/disabled accordingly.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-3-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7124: Remove shift from scan_type

The 24 bits data is stored in 32 bits in BE. There
is no need to shift it. This confuses user-space apps.

Fixes: b3af341bbd966 ("iio: adc: Add ad7124 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-2-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: Add support for ICM-20608-D

The difference between the ICM-20608-D and the other ICM-20608
variants is the addition of a DMP (Digital Motion Processor) core.
This difference is deemed substantial enough to change the WHOAMI
register value.
Since this driver doesn't currently acknowledge the exisence of
something like a DMP core, simply copy ICM-20608 except for the
aforementioned WHOAMI register.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220323121550.16096-3-michael.srba@seznam.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: mpu6050: Document invensense,icm20608d

ICM-20608-D differs from the other ICM-20608 variants by having
a DMP (Digital Motion Processor) core tacked on.
Despite having a different WHOAMI register, this variant is
completely interchangeable with the other ICM-20608 variants
by simply pretending the DMP core doesn't exist.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220323121550.16096-2-michael.srba@seznam.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: updated Lorenzo's email address

Using my kernel.org email for iio devices.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c75f0e1c683b6ad0333d5504fb00c6f1b14dd1bf.1648114531.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: ltc2983: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

The conversion slightly changes the logic behind property reading for
the configuration values. Original code allocates just as much memory
as needed. Then for each separate 32- or 64-bit value it reads it from
the property and converts to a raw one which will be fed to the sensor.
In the new code we allocate the amount of memory needed to retrieve all
values at once from the property and then convert them as required.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220307203606.87258-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: ltc2983: Use single error path to put OF node

There are several, possibly copied'n'pasted, places in the functions,
where OF node is put and error returned directly, while the common
exit point exists. Unify all these cases to use a single error path.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220307203606.87258-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: ltc2983: Don't hard code defined constants in messages

In a couple of messages the constants, which have their definitions,
are hard coded into the message text. Unhardcode them.

While at it, add a trailing \n where it's currently missing.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220307203606.87258-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dummy: iio_simple_dummy: check the return value of kstrdup()

kstrdup() is also a memory allocation-related function, it returns NULL
when some memory errors happen. So it is better to check the return
value of it so to catch the memory error in time. Besides, there should
have a kfree() to clear up the allocation if we get a failure later in
this function to prevent memory leak.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C920CFCC33B9CC1C63141FE1334A39FF8508@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: multiplexer: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20220302160025.54348-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ltc2688: Use temporary variable for struct device

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220302153142.52743-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: add support for LIS302DL variant

Add support for STMicroelectronics LIS302DL accelerometer to the st_accel
framework.

Datasheet: https://www.st.com/resource/en/datasheet/lis302dl.pdf

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220307132502.73854-4-absicsz@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: Remove unused enum in st_accel

The st_accel_type enum is not used anywhere else in the code, and can be
removed

Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220307132502.73854-3-absicsz@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: st,st-sensors add LIS302DL

Update st,st-sensors bindings for STMicroelectronics LIS302DL variant

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220307132502.73854-2-absicsz@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: fix a few code style issues

* Fix indent in else statement
* Remove unnecessary 'else' after 'break'
* Remove space in '* attr'

Signed-off-by: Alexander Vorwerk <alexander.vorwerk@stud.uni-goettingen.de>
Link: https://lore.kernel.org/r/20220312180343.8935-1-alexander.vorwerk@stud.uni-goettingen.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Linux 5.18-rc1

Merge tag 'trace-v5.18-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"

Merge tag 'x86-urgent-2022-04-03' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and updates:

   - Make the prctl() for enabling dynamic XSTATE components correct so
     it adds the newly requested feature to the permission bitmap
     instead of overwriting it. Add a selftest which validates that.

   - Unroll string MMIO for encrypted SEV guests as the hypervisor
     cannot emulate it.

   - Handle supervisor states correctly in the FPU/XSTATE code so it
     takes the feature set of the fpstate buffer into account. The
     feature sets can differ between host and guest buffers. Guest
     buffers do not contain supervisor states. So far this was not an
     issue, but with enabling PASID it needs to be handled in the buffer
     offset calculation and in the permission bitmaps.

   - Avoid a gazillion of repeated CPUID invocations in by caching the
     values early in the FPU/XSTATE code.

   - Enable CONFIG_WERROR in x86 defconfig.

   - Make the X86 defconfigs more useful by adapting them to Y2022
     reality"

* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Consolidate size calculations
  x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  x86/fpu: Cache xfeature flags from CPUID
  x86/fpu/xsave: Initialize offset/size cache early
  x86/fpu: Remove unused supervisor only offsets
  x86/fpu: Remove redundant XCOMP_BV initialization
  x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  x86/config: Make the x86 defconfigs a bit more usable
  x86/defconfig: Enable WERROR
  selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Merge tag 'core-urgent-2022-04-03' of git://git./linux/kernel/git/tip/tip

Pull RT signal fix from Thomas Gleixner:
 "Revert the RT related signal changes. They need to be reworked and
  generalized"

* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"

Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping

Pull more dma-mapping updates from Christoph Hellwig:

 - fix a regression in dma remap handling vs AMD memory encryption (me)

 - finally kill off the legacy PCI DMA API (Christophe JAILLET)

* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move pgprot_decrypted out of dma_pgprot
  PCI/doc: cleanup references to the legacy PCI DMA API
  PCI: Remove the deprecated "pci-dma-compat.h" API

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - avoid unnecessary rebuilds for library objects

 - fix return value of __setup handlers

 - fix invalid input check for "crashkernel=" kernel option

 - silence KASAN warnings in unwind_frame

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
  ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
  ARM: 9187/1: JIVE: fix return value of __setup handler
  ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects

Revert "clk: Drop the rate range on clk_put()"

This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org

Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Avoid SEGV if core.cpus isn't set in 'perf stat'.

 - Stop depending on .git files for building PERF-VERSION-FILE, used in
   'perf --version', fixing some perf tools build scenarios.

 - Convert tracepoint.py example to python3.

 - Update UAPI header copies from the kernel sources: socket,
   mman-common, msr-index, KVM, i915 and cpufeatures.

 - Update copy of libbpf's hashmap.c.

 - Directly return instead of using local ret variable in
   evlist__create_syswide_maps(), found by coccinelle.

* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf python: Convert tracepoint.py example to python3
  perf evlist: Directly return instead of using local ret variable
  perf cpumap: More cpu map reuse by merge.
  perf cpumap: Add is_subset function
  perf evlist: Rename cpus to user_requested_cpus
  perf tools: Stop depending on .git files for building PERF-VERSION-FILE
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools kvm headers arm64: Update KVM headers from the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf tools: Update copy of libbpf's hashmap.c
  perf stat: Avoid SEGV if core.cpus isn't set

Merge tag 'kbuild-fixes-v5.18' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix empty $(PYTHON) expansion.

 - Fix UML, which got broken by the attempt to suppress Clang warnings.

 - Fix warning message in modpost.

* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: restore the warning message for missing symbol versions
  Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
  kbuild: Remove '-mno-global-merge'
  kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
  kconfig: remove stale comment about removed kconfig_print_symbol()

Merge tag 'mips_5.18_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - build fix for gpio

 - fix crc32 build problems

 - check for failed memory allocations

* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: crypto: Fix CRC32 code
  MIPS: rb532: move GPIOD definition into C-files
  MIPS: lantiq: check the return value of kzalloc()
  mips: sgi-ip22: add a check for the return of kzalloc()

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:

 - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

 - Documentation improvements

 - Prevent module exit until all VMs are freed

 - PMU Virtualization fixes

 - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences

 - Other miscellaneous bugfixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: fix sending PV IPI
  KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
  KVM: x86: Remove redundant vm_entry_controls_clearbit() call
  KVM: x86: cleanup enter_rmode()
  KVM: x86: SVM: fix tsc scaling when the host doesn't support it
  kvm: x86: SVM: remove unused defines
  KVM: x86: SVM: move tsc ratio definitions to svm.h
  KVM: x86: SVM: fix avic spec based definitions again
  KVM: MIPS: remove reference to trap&emulate virtualization
  KVM: x86: document limitations of MSR filtering
  KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
  KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
  KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
  KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
  KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
  KVM: x86: Trace all APICv inhibit changes and capture overall status
  KVM: x86: Add wrappers for setting/clearing APICv inhibits
  KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
  KVM: X86: Handle implicit supervisor access with SMAP
  KVM: X86: Rename variable smap to not_smap in permission_fault()
  ...

modpost: restore the warning message for missing symbol versions

This log message was accidentally chopped off.

I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].

I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.

[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/

Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block

Pull block driver fix from Jens Axboe:
 "Got two reports on nbd spewing warnings on load now, which is a
  regression from a commit that went into your tree yesterday.

  Revert the problematic change for now"

* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
  Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"

Merge tag 'pci-v5.18-changes-2' of git://git./linux/kernel/git/helgaas/pci

Pull pci fix from Bjorn Helgaas:

 - Fix Hyper-V "defined but not used" build issue added during merge
   window (YueHaibing)

* tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: hv: Remove unused hv_set_msi_entry_from_desc()

Merge tag 'tag-chrome-platform-for-v5.18' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "cros_ec_typec:

   - Check for EC device - Fix a crash when using the cros_ec_typec
     driver on older hardware not capable of typec commands

   - Make try power role optional

   - Mux configuration reorganization series from Prashant

  cros_ec_debugfs:

   - Fix use after free. Thanks Tzung-bi

  sensorhub:

   - cros_ec_sensorhub fixup - Split trace include file

  misc:

   - Add new mailing list for chrome-platform development:

chrome-platform@lists.linux.dev

     Now with patchwork!"

* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_debugfs: detach log reader wq from devm
  platform: chrome: Split trace include file
  platform/chrome: cros_ec_typec: Update mux flags during partner removal
  platform/chrome: cros_ec_typec: Configure muxes at start of port update
  platform/chrome: cros_ec_typec: Get mux state inside configure_mux
  platform/chrome: cros_ec_typec: Move mux flag checks
  platform/chrome: cros_ec_typec: Check for EC device
  platform/chrome: cros_ec_typec: Make try power role optional
  MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list

Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"

This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54.

Both Gabriel and Borislav report that this commit casues a regression
with nbd:

sysfs: cannot create duplicate filename '/dev/block/43:0'

Revert it before 5.18-rc1 and we'll investigage this separately in
due time.

Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/
Reported-by: Gabriel L. Somlo <somlo@cmu.edu>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

watch_queue: Free the page array when watch_queue is dismantled

Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the
watch_queue is torn down") took care of the bitmap, but not the page
array.

  BUG: memory leak
  unreferenced object 0xffff88810d9bc140 (size 32):
  comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s)
  hex dump (first 32 bytes):
    40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00  @.@.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
     kmalloc_array include/linux/slab.h:621 [inline]
     kcalloc include/linux/slab.h:652 [inline]
     watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251
     pipe_ioctl+0x82/0x140 fs/pipe.c:632
     vfs_ioctl fs/ioctl.c:51 [inline]
     __do_sys_ioctl fs/ioctl.c:874 [inline]
     __se_sys_ioctl fs/ioctl.c:860 [inline]
     __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
     do_syscall_x64 arch/x86/entry/common.c:50 [inline]

Reported-by: syzbot+25ea042ae28f3888727a@syzkaller.appspotmail.com
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20220322004654.618274-1-eric.dumazet@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tracing: mark user_events as BROKEN

After being merged, user_events become more visible to a wider audience
that have concerns with the current API.

It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config).  Then we can work finding a better API.  If that fails,
then it will need to be completely reverted.

To not have the code silently bitrot, still allow building it with
COMPILE_TEST.

And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.

Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile.  This is a good way to remind us to move the header
back.

Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tracing: Move user_events.h temporarily out of include/uapi

While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.

Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.

Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Make ftrace_graph_is_dead() a static branch

ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.

For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().

While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.

Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.

The performance improvement is noticeable.

Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Set user_events to BROKEN

After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.

Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/
Link: https://lkml.kernel.org/r/20220330155835.5e1f6669@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/user_events: Remove eBPF interfaces

Remove eBPF interfaces within user_events to ensure they are fully
reviewed.

Link: https://lore.kernel.org/all/20220329165718.GA10381@kbox/
Link: https://lkml.kernel.org/r/20220329173051.10087-1-beaub@linux.microsoft.com
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing/user_events: Hold event_mutex during dyn_event_add

Make sure the event_mutex is properly held during dyn_event_add call.
This is required when adding dynamic events.

Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

proc: bootconfig: Add null pointer check

kzalloc is a memory allocation function which can return NULL when some
internal memory errors happen. It is safer to add null pointer check.

Link: https://lkml.kernel.org/r/20220329104004.2376879-1-lv.ruyi@zte.com.cn
Cc: stable@vger.kernel.org
Fixes: c1a3c36017d4 ("proc: bootconfig: Add /proc/bootconfig to show boot config list")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

tracing: Rename the staging files for trace_events

When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

KVM: x86: fix sending PV IPI

If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask.  In this case __send_ipi_mask
should send the IPI.

This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.

Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: do compare-and-exchange of gPTE via the user address

FNAME(cmpxchg_gpte) is an inefficient mess.  It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.

The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap().  To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c.  But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address.  That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly.  Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for.  But at least it is an efficient mess.

(Thanks to Linus for suggesting improvement on the inline assembly).

Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Remove redundant vm_entry_controls_clearbit() call

When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer().  This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly.  In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.

Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: cleanup enter_rmode()

vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer().  uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.

Opportunistically use "vmx" directly instead of redoing to_vmx().

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: SVM: fix tsc scaling when the host doesn't support it

It was decided that when TSC scaling is not supported,
the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0'
value.

However in this case kvm_max_tsc_scaling_ratio is not set,
which breaks various assumptions.

Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of
host support.  For consistency, do the same for VMX.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: x86: SVM: remove unused defines

Remove some unused #defines from svm.c

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: SVM: move tsc ratio definitions to svm.h

Another piece of SVM spec which should be in the header file

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>