staging: rtl8192e: Remove unused variable SifsTime

SifsTime is written and then never evaluated. Remove resulting dead code.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/40234d0b1ab1eff23c71d96e8b0f1f0085e2bbac.1674071236.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PHYRegDef, CurrentChannelBW and CustomerID

Rename variable PHYRegDef to phy_reg_def, CurrentChannelBW to
current_chnl_bw and CustomerID to customer_id to avoid CamelCase which is
not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/d609d1edfaa500a9512c2e3c950efc2e2a266a70.1674071236.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename LastRxDescTSF, LoopbackMode and pFirmware

Rename variable LastRxDescTSF to last_rx_desc_tsf, LoopbackMode to
loopback_mode and pFirmware to fw_info to avoid CamelCase which is not
accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/d6c77644d5602ad6e5b4889336a1a4700401321d.1674071236.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename LongRetryL.., ShortRetryL.. and ReceiveConfig

Rename variable LongRetryLimit to long_retry_limit, ShortRetryLimit to
short_retry_limit and ReceiveConfig to receive_config to avoid CamelCase
which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/6e3920f3353ebc6dd1d039f54688fa1966cc431b.1674071236.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Remove unused code

Following structs are defined but never used. Remove such dead code.
hfa384x_pdr_pcb_partnum
hfa384x_pdr_pcb_tracenum
hfa384x_pdr_nic_serial
hfa384x_pdr_mkk_measurements
hfa384x_pdr_nic_ramsize
hfa384x_pdr_refdac_measurements
hfa384x_pdr_vgdac_measurements
hfa384x_pdr_level_comp_measurements
hfa384x_pdr_mac_address
hfa384x_pdr_mkk_callname
hfa384x_pdr_regdomain
hfa384x_pdr_allowed_channel
hfa384x_pdr_default_channel
hfa384x_pdr_privacy_option
hfa384x_pdr_temptype
hfa384x_pdr_refdac_setup
hfa384x_pdr_vgdac_setup
hfa384x_pdr_level_comp_setup
hfa384x_pdr_trimdac_setup
hfa384x_pdr_ifr_setting
hfa384x_pdr_rfr_setting
hfa384x_pdr_hfa3861_baseline
hfa384x_pdr_hfa3861_shadow
hfa384x_pdr_hfa3861_ifrf
hfa384x_pdr_hfa3861_chcalsp
hfa384x_pdr_hfa3861_chcali
hfa384x_pdr_hfa3861_nic_config
hfa384x_pdr_hfo_delay
hfa384x_pdr_hfa3861_manf_testsp
hfa384x_pdr_hfa3861_manf_testi
hfa384x_pdr_end_of_pda

Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y8d3IOQ8fry2xmz4@ubun2204.myguest.virtualbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Add checks for dma_alloc_coherent()

As the dma_alloc_coherent may return NULL, the return value needs to be
checked to avoid NULL poineter dereference.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Link: https://lore.kernel.org/r/20230119083119.16956-1-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert PHY_BBConfig8188E() to common error logic

Convert the function PHY_BBConfig8188E() away from returning _FAIL or
_SUCCESS which uses inverted error logic. Use the common error logic
instead. Return 0 for success and negative values for failure.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert phy_BB8188E_Config_ParaFile() to common error logic

Convert the fubction phy_BB8188E_Config_ParaFile() away from returning
_FAIL or _SUCCESS which uses inverted error logic. Use the common error
logic instead. Return 0 for success and negative values for failure.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert phy_RF6052_Config_ParaFile() to common error logic

Convert the function phy_RF6052_Config_ParaFile() away from returning
_FAIL or _SUCCESS which uses inverted error logic. Use the common error
logic instead. Return 0 for success and negative values for failure.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert PHY_MACConfig8188E() to common error logic

Convert the function PHY_MACConfig8188E() away from returning _FAIL or
_SUCCESS which uses inverted error logic. Use the common error logic
instead. Return 0 for success and negative values for failure.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230115210734.18610-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: pass struct adapter to usb_read

The usb_read function takes a struct intf_hdl only to extract the struct
adapter from it. We can pass struct adapter directly.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-18-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove usb buffer macros

Remove two unused macros that allocate and free usb buffers.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-17-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove struct io_req

struct io_req is not needed in the r8188eu driver. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-16-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove IO defines

Remove a couple of IO related defines which are not used in the r8188eu
driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-15-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove readmem and writemem prototypes

Remove the prototypes for the unused _rtw_read_mem and _rtw_write_mem
functions.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-14-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove interface handler prototypes

Remove prototypes for interface handler functions. They are not used by
the r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove struct reg_protocol_wt

Remove struct reg_protocol_wt. It's not used in the r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove struct reg_protocol_rd

Remove struct reg_protocol_rd. It's not used in the r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove dev_power_down function prototype

The dev_power_down function is not present in the r8188eu driver. Remove
its prototype.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_write_scsi function prototype

The rtw_write_scsi function is not present in the r8188eu driver. Remove
its prototype.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove attrib function prototypes

Remove the prototypes for attrib read and write functions which are not
present in the r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove struct io_queue

struct io_queue is not used in the r8188eu driver. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove async write function prototypes

Remove some prototypes for async write functions which are not present in
the r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove async read function prototypes

Remove some prototypes for async read functions which are not present in
the r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove ioreq function prototypes

Remove some prototypes for ioreq functions which are not present in the
r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove io function prototypes

Remove some prototypes for io functions which are not present in the
r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove struct io_priv

struct io_priv has only one member (and a pointer to the enclosing struct
adapter). We can remove struct io_priv and move its member directly into
struct adapter.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111195640.306748-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove NULL check for usb_kill_urb

usb_kill_urb handles a NULL parameter. There's no need for NULL checks
before we call usb_kill_urb.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230111100201.251905-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: always process urb status

Remove the if clause in usb_write_port_complete and process the urb
status regardless of bSurpriseRemoved, bDriverStopped and
bWritePortCancel.

The only possible results of urb status processing are updates to
bSurpriseRemoved and bDriverStopped. All of the three status variable are
set to true only if the whole USB processing has to be stopped (when the
driver is unloaded or when the system goes to sleep).

It's no problem if one of the "stop everything" variables is already set
and the urb status processing sets another one.

This patch removes the last goto in usb_write_port_complete. It's also
part of the ongoing effort to limit the use of the "stop everything"
variables.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused function parameter

The regs parameter of the usb_write_port_complete function is not used. We
can remove it.

We can also remove the macro to hide the regs parameter when
usb_write_port_complete is used as callback function for an urb transfer.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: reformat usb_write_port_complete

This trivial patch reformats the usb_write_port_complete function.
Hopefully, this makes the code a bit easier to read.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: refactor status handling in usb_write_port_complete

Refactor the satus handling in usb_write_port_complete. Make it clearer
what happens for each status and avoid all the goto statements.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230110205626.183516-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: xmit_priv's vcs_setting is not used

vcs_setting in struct xmit_priv is not used any more. We can remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: xmit_priv's vcs is not used

The vcs component in struct xmit_priv is set but not used. We can remove
vcs and the rtw_update_protection function, whose only job is to set vcs.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: xmit_priv's vcs_type is not used

The vcs_type component of struct xmit_priv is not used. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused QSLT defines

Remove unused defines for Queue Select Value in TxDesc.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: txirp_cnt is write-only

txirp_cnt in struct xmit_priv is initialised but never read. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused hal_xmit_handler define

hal_xmit_handler is not used by the r8188eu driver. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: dir_dev is unused

dir_dev in struct adapter is not used by the r8188eu driver. It can be
removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: replace switch with if

The switch statement in usb_write_port_complete has only one single case.
Replace it with an if statement.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: voq_cnt is write-only

voq_cnt in struct xmit_priv is initialised, incremented and decremented
but never read. Remove voq_cnt and resulting dead code.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: viq_cnt is write-only

viq_cnt in struct xmit_priv is initialised, incremented and decremented
but never read. Remove viq_cnt and resulting dead code.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: bkq_cnt is write-only

bkq_cnt in struct xmit_priv is initialised, incremented and decremented
but never read. Remove bkq_cnt and resulting dead code.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: beq_cnt is write-only

beq_cnt in struct xmit_priv is initialised, incremented and decremented
but never read. Remove beq_cnt and resulting dead code.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230109212852.75612-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert rtw_writeN() to common error logic

Convert the function rtw_writeN() away from returning _FAIL or
_SUCCESS which uses inverted error logic. Use the common error logic
instead. Return 0 for success and negative values for failure.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230108123804.3754-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rtw_init_hwxmits is not needed

The _rtw_init_xmit_priv function calls rtw_alloc_hwxmits to allocate
memory for pxmitpriv->hwxmits (this is an array of struct hw_xmit). This
allocation uses kzalloc, the allocated memory is initialised with 0.

After the allocation, _rtw_init_xmit_priv calls rtw_init_hwxmits to set an
element of each hw_xmit to 0. This is not necessary, we can remove the
rtw_init_hwxmits call and the now unused function rtw_init_hwxmits.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-20-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: phwxmit parameter is unused

Remove the unused function parameter phwxmit from function
dequeue_one_xmitframe.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-19-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unnecessary rtw_free_xmitframe call

There's no need to call rtw_free_xmitframe before we dequeue the first
frame. pxmitframe is always NULL at this point, rtw_free_xmitframe will do
nothing in this case.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-18-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: tx_retevt semaphore is not used

Remove tx_retevt from struct xmit_priv. This semaphore is initialised but
not used.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-17-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: terminate_xmitthread_sema is not used

Remove terminate_xmitthread_sema from struct xmit_priv. This semaphore is
initialised but not used.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-16-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: bm_pending is not used

The bm_pending queue in struct xmit_priv is initialised but not used. It
can be removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-15-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused dma_transfer_addr

The dma_transfer_addr component in struct xmit_buf is initialised but not
used. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-14-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused bpending array

The bpending array in struct xmit_buf is unused. Remove it.

(struct xmit_buf is not part of the interface between the kernel driver and
the device's firmware. It's safe to remove components from this struct.)

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: clean up qos_option setting

The qos_option variable in function rtw_make_wlanhdr should be a boolean
as it's set to true or false. We can directly set it to
pqospriv->qos_option instead of using a default value and if statements.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: simplify rtw_make_wlanhdr's error handling

Simplify the error handling in rtw_make_wlanhdr. Exit immediately instead
of jumping to the end of the function. We don't have to do any clean-up.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: simplify frame type check

Reorder the code in rtw_make_wlanhdr to make the function simpler.
There's a large if statement to check that we process only data frames.
Revert the condition and exit for non-data frames.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove duplicate psta check

We do not need the psta check in the while loop of rtw_xmitframe_coalesce.
psta is already checked near the start of the function and is not modified
afterwards.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtl8188eu_init_xmit_priv

rtl8188eu_init_xmit_priv's only jobs is to initialise the xmit tasklet.

Remove rtl8188eu_init_xmit_priv and initialise the xmit tasklet in
_rtw_init_xmit_priv. Yet again, this makes the code a tiny bit smaller.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: simplify rtl8188eu_xmit_tasklet

Simplify the rtl8188eu_xmit_tasklet function. Remove an unnecessary
temporary variable and reformat the code.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused parameter

All callers of rtl8188eu_xmitframe_complete set the pxmitbuf parameter to
NULL, in which case rtl8188eu_xmitframe_complete allocates another
xmit_buf internally.

Remove the pxmitbuf parameter and resulting dead code.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: return immediately if we're not meant to encrypt

In function xmitframe_swencrypt, we can return immediately if our packet
needs no encryption. This is simpler than wrapping all the code into a
large if statement.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: cmd_seq is write-only

The cmd_seq component of struct cmd_priv is set and incremented but never
read. It can be removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove some unused CAM defines

Remove some CAM-related defines which are not used in the r8188eu driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: make xmitframe_swencrypt a void function

xmitframe_swencrypt always returns _SUCCESS and the caller does not check
the return value. We can remove the return value and make
xmitframe_swencrypt a void function.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230180646.91008-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove intermediate token variable

Remove the token variable in on_action_public and use frame_body[2] as
function parameter. This saves another few lines of code.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230175326.90617-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove intermediate pframe pointer

The pframe pointer in on_action_public is used only in the definition of
frame_body, which points to the payload of an incoming action frame.

We can use mgmt to locate the action payload and remove the pframe
pointer.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230175326.90617-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: merge on_action_public_default into its only caller

Merge on_action_public_default into on_action_public, which is the only
caller. Yet again, this makes the code a tiny bit smaller.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230175326.90617-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: merge on_action_public_vendor into its caller

Apart from declaring variables, on_action_public_vendor is only an if
statement. Merge this function into its only caller. This makes the code a
tiny bit smaller.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20221230175326.90617-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: use strscpy() to instead of strncpy()

The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.

Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202212261905476729002@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Prefer kcalloc over kzalloc

Fixed following checkpatch.pl warning:
 * WARNING: Prefer kcalloc over kzalloc with multiply

Instead of specifying (number of bytes) * (size) as arugment
in kzalloc, prefer kcalloc.

Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20221216223942.334221-1-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename EEPROMTxPower.., AutoloadF.. and SilentReset..

Rename variable SilentResetRxSlotIndex to silent_reset_rx_slot_index,
IC_Cut to ic_cut and Rf_Mode to rf_mode to avoid CamelCase which is not
accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/60c1fb2861143c8736f061cf85e737b78c210a09.1673812850.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename EEPROMTxPower.., AutoloadF.. and SilentReset..

Rename variable EEPROMTxPowerLevelCCK to eeprom_tx_pwr_level_cck,
AutoloadFailFlag to autoload_fail_flag and SilentResetRxStuckEvent to
silent_reset_rx_stuck_event to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/328bdd5fd16ba000d2083473e16e89ce2e2521ee.1673812850.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename EEPROMTherma.., EEPROMAntPw.. and EEPROMTxPow..

Rename variable EEPROMThermalMeter to eeprom_thermal_meter,
EEPROMAntPwDiff to eeprom_ant_pwr_diff and EEPROMTxPowerLevelOFDM24G to
eeprom_tx_pwr_level_ofdm24g to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/f708533cc24af1e08f34b681b9e8e8c01dc7b8f5.1673812850.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CrystalCap, EEPROMLegacyHTT.. and EEPROMCrys..

Rename variable CrystalCap to crystal_cap, EEPROMLegacyHTTxPowerDiff to
eeprom_legacy_ht_tx_pwr_diff and EEPROMCrystalCap to eeprom_crystal_cap
to avoid CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/16337153218e9d1e25f90ca17774d1246086f1a7.1673812849.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename SetBWModeIn.., SwChnlInPro.. and ThermalMet..

Rename variable SetBWModeInProgress to set_bw_mode_in_progress,
SwChnlInProgress to sw_chnl_in_progress and ThermalMeter to thermal_meter
to avoid CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/fc8bffbef60dba7aeb3bdfeab031c4e02e551c82.1673812849.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename bResetInPro.., framesyncMo.. and nCur40MhzPri..

Rename variable bResetInProgress to reset_in_progress, framesyncMonitor to
frame_sync_monitor and nCur40MhzPrimeSC to n_cur_40mhz_prime_sc to avoid
CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/dc9a6353e2342f524d8cbf0de6a6340990dc913b.1673812849.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rateCountDi.., ContinueDif.. and TxCounter

Rename variable rateCountDiffRecord to rate_count_diff_rec,
ContinueDiffCount to continue_diff_count and TxCounter to tx_counter to
avoid CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/c1e168e60a987ae64b64490c04ad79fd0f2f7583.1673812849.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename Record_CCK_2.., Record_CCK_4.. and DefaultIn..

Rename variable Record_CCK_20Mindex to rec_cck_20m_idx,
Record_CCK_40Mindex to rec_cck_40m_idx and DefaultInitialGain to
def_initial_gain to avoid CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2963e704afae2382bb7fded0453adbc4a8d48db3.1673812849.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename bLastDTPFlag_Low, OFDM_index and CCK_index

Rename variable bLastDTPFlag_Low to last_dtp_flag_low, OFDM_index to
ofdm_index and CCK_index to cck_index to avoid CamelCase which is not
accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/1058b8be954b634f5c2cd9d4a46c33dbbe9459c5.1673812849.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename bDynamicTxHig.., bDynamicTxL.. and bLastDTPF..

Rename variable bDynamicTxHighPower to dynamic_tx_high_pwr,
bDynamicTxLowPower to dynamic_tx_low_pwr and bLastDTPFlag_High to
last_dtp_flag_high to avoid CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/585a76cf4d2c805eada805c18c18ef207b9a4ea4.1673812849.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename SetRFPowerSta.., RfReg0Value and bTXPowerDa..

Rename variable SetRFPowerStateInProgress to set_rf_pwr_state_in_progress,
RfReg0Value to rf_reg_0value and bTXPowerDataReadFromEEPORM to
tx_pwr_data_read_from_eeprom to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/01ff54a2c135ba6e3d06255102679d496fd2aef1.1673290428.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename MCSTxPowerL.., LegacyHTTxPowe.. and AntennaTx..

Rename variable MCSTxPowerLevelOriginalOffset to
mcs_tx_pwr_level_org_offset, LegacyHTTxPowerDiff to legacy_ht_tx_pwr_diff
and AntennaTxPwDiff to antenna_tx_pwr_diff to avoid CamelCase which is not
accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/271b3a9e1c23593e9ead925eb8415a584058fb56.1673290428.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename TxPowerLevelOFDM24G...

Rename variable TxPowerLevelOFDM24G to tx_pwr_level_ofdm_24g,
TxPowerLevelOFDM24G_A to tx_pwr_level_ofdm_24g_a and TxPowerLevelOFDM24G_C
to tx_pwr_level_ofdm_24g_c to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/6bb354bd6f6387a26378de3b154d975b826a1a88.1673290428.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename TxPowerLevelCCK...

Rename variable TxPowerLevelCCK to tx_pwr_level_cck, TxPowerLevelCCK_A to
tx_pwr_level_cck_a and TxPowerLevelCCK_C to tx_pwr_level_cck_c to avoid
CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/c18af327debcf85f3498be9c7a1492d501748669.1673290428.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CCKPresentAtt...

Rename variable CCKPresentAttentuation_20Mdefault to
cck_present_attn_20m_def, CCKPresentAttentuation_40Mdefault to
cck_present_attn_40m_def and CCKPresentAttentuation_difference to
cck_present_attn_diff to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/1254f23aefd25075ef3e16719eed79b461f41e4c.1673290428.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename TSSI_13dBm, Pwr_Track and NumTotalRFPath

Rename variable TSSI_13dBm to tssi_13dBm, Pwr_Track to pwr_track and
NumTotalRFPath to num_total_rf_path to avoid CamelCase which is not
accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/d3bb45535b7babd1cb8df437ca238eb0ce93c9fe.1673290428.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename ChannelPlan, eeprom_ChannelPlan and CckPwEnl

Rename variable ChannelPlan to chnl_plan, eeprom_ChannelPlan to
eeprom_chnl_plan and CckPwEnl to cck_pwr_enl to avoid CamelCase which is
not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/aee78a6adf41a2096898e0c0c5ef45e9f7e1659b.1673290428.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Fix codespell-reported spelling mistakes

They are appear to be spelling mistakes,
Initially identified in a codespell report and never been addressed so far.

drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:656: regsiters ==> registers
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:1696: beacause ==> because
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:2092: Checl ==> Check
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:2513: checksume ==> checksum
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:2726: sequense ==> sequence
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:2780: vlaue ==> value
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:3409: equall ==> equal, equally

Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Link: https://lore.kernel.org/r/Y61y+flJp9/jEicc@local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces

Remove extra spaces before statements to fix
following indentation warnings reported by checkpatch.pl.

WARNING: Statements should start on a tabstop
+  struct delayed_work start_ibss_wq;

Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Link: https://lore.kernel.org/r/Y6215u/jtmcgO6TY@local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: use strscpy() to instead of strncpy()

The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.

Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/202212261903245548969@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: vchiq: Drop custom return values from TODO

The custom return values (enum vchiq_status) has been dropped.
Remove the TODO entry for the same.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221223122404.170585-8-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Drop enum vchiq_status remnants

Drop all references to enum vchiq_status as they are no longer in
use.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221223122404.170585-7-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: vchiq_arm: Drop VCHIQ_RETRY usage on disconnect

Drop the usage of VCHIQ_RETRY when the vchiq has connection status
VCHIQ_CONNSTATE_DISCONNECTED. Disconnected status will not be valid to
carry on a retry, hence replace the VCHIQ_RETRY with -ENOTCONN.

This patch removes the usage of vCHIQ_RETRY completely and act as
intermediatory to address the TODO item:
* Get rid of custom function return values
for vc04_services/interface.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221223122404.170585-6-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Drop VCHIQ_RETRY usage

Drop the usage of VCHIQ_RETRY vchiq_status enum type in most of the
places and replace it with -EAGAIN. The exception to this replacement
is vchiq_send_remote_use() and vchiq_send_remote_use_active() which will
be addressed in the subsequent commit.

This patch acts as intermediatory to address the TODO item:
    * Get rid of custom function return values
for vc04_services/interface.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221223122404.170585-5-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Drop VCHIQ_ERROR usage

Drop the usage of VCHIQ_ERROR vchiq_status enum type. Replace it with
-EINVAL to report the error in most cases, -ENOMEM for out-of-memory
errors and -EHOSTDOWN for service shutdown.

This patch acts as intermediatory to address the TODO item:
    * Get rid of custom function return values
for vc04_services/interface.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221223122404.170585-4-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Drop VCHIQ_SUCCESS usage

Drop the usage of VCHIQ_SUCCESS vchiq_status enum type. Replace it with
0 to report the success status.

This patch acts as intermediatory to address the TODO item:
* Get rid of custom function return values
for vc04_services/interface.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221223122404.170585-3-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Replace vchiq_status return type to int

Modify the functions' signature using enum vchiq_status to return int.
Currently, this patch only touches the function signatures and
in subsequent patches each vchiq_status enumerated value will be
replaced by a integer value.

This patch acts as an initial point to address the TODO item:
* Get rid of custom function return values
for vc04_services/interface.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221223122404.170585-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_core: Add comments to remote event parts

struct remote_event and the related functions remote_event_*() provides
a higher function between ARM core and VPU. It's very helpful for a
reviewer to have explaining comments about these parts.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20221222141553.138563-1-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: gpio: Replace macro irq_data_to_gpio_chip with function

Replace the macro irq_data_to_gpio_chip with a static inline function to comply
with Linux coding style standards.

Signed-off-by: Brent Pappas <bpappas@pappasbrent.com>
Link: https://lore.kernel.org/r/20230117152857.22141-1-bpappas@pappasbrent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme_user: Replace the "<<" with BIT macro

Replace the "<<" operator with BIT macro, in accordance to the
checkpatch.pl script and Linux kernel coding-style guidelines.

Signed-off-by: Abhirup Deb <abhirupdeb@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/Y8O5DN9ehby8K487@li-27defe4c-32e1-11b2-a85c-e202e9981075.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>