Recognize and skip 64-bit PowerPC Linux linkage functions.
* ppc-linux-tdep.c (insn_d, insn_ds, insn_xfx, read_insn, struct
insn_pattern, insns_match_pattern, d_field, ds_field): New
functions, macros, and types for working with PPC instructions.
(ppc64_standard_linkage, PPC64_STANDARD_LINKAGE_LEN,
ppc64_in_solib_call_trampoline, ppc64_standard_linkage_target,
ppc64_skip_trampoline_code): New functions, variables, and macros
for recognizing and skipping linkage functions.
(ppc_linux_init_abi): Use ppc64_in_solib_call_trampoline and
ppc64_skip_trampoline_code for the 64-bit PowerPC Linux ABI.

* ppc-linux-nat.c (ppc_register_u_addr): Correctly compute u-area
register offsets for both the 32- and 64-bit interfaces.

*** empty log message ***

daily update

Actually finish the job started by my change of 2003-05-29.
* config/powerpc/tm-linux.h (SKIP_TRAMPOLINE_CODE): Remove the
other #definition of this.
(ppc_linux_skip_trampoline_code): Remove declaration.
* ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Make this
static.
(ppc_linux_init_abi): Register it as the skip_trampoline_code
method for GDBARCH.

* config/powerpc/nm-ppc64-linux.h (PTRACE_XFER_TYPE): This is
'long' on ppc64-*-linux*.

* ppc-linux-nat.c (ppc_register_u_addr, fill_gregset): If PT_MQ
isn't #defined, assume the register doesn't exist: act as if
tdep->ppc_mq_regnum were -1.

* configure.host, configure.tgt: Add entries for
powerpc64-*-linux, selecting powerpc/ppc64-linux.mh and
powerpc/linux.mt.
* config/powerpc/ppc64-linux.mh, config/powerpc/nm-ppc64-linux.mh:
New files.

* arch-utils.c (always_use_struct_convention): New function.
* arch-utils.h (always_use_struct_convention): New prototype.
* alpha-tdep.c (alpha_use_struct_convention): Delete.
(alpha_gdbarch_init): Register always_use_struct_convention,
instead of alpha_use_struct_convention.
* cris-tdep.c (cris_use_struct_convention): Delete.
(cris_gdbarch_init): Register always_use_struct_convention,
instead of cris_use_struct_convention.
* frv-tdep.c (frv_use_struct_convention): Delete.
(frv_gdbarch_init): Register always_use_struct_convention,
instead of frv_use_struct_convention.
* h8300-tdep.c (h8300_use_struct_convention): Delete.
(h8300_gdbarch_init): Register always_use_struct_convention,
instead of h8300_use_struct_convention.
* mips_o32-tdep.c (mips_o32_use_struct_convention): Delete.
(mips_o32_gdbarch_init): Register always_use_struct_convention,
instead of mips_o32_use_struct_convention.

2003-06-12  Andrew Cagney  <cagney@redhat.com>

* wince.c: Include "mips-tdep.h".
* mips-tdep.h (mips_next_pc): Declare.
* mcore-tdep.c: Make more local functions static.
* Makefile.in (wince.o): Update dependencies.

2003-06-12  Jeff Johnston  <jjohnstn@redhat.com>

        * gdb.base/float.exp: Add ia64 support.

* ld-mips-elf/elf-rel-got-n64-linux.d: New file.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: New file.
* ld-mips-elf/mips-elf.exp: Use the new files for Linux.

* MAINTAINERS: Add myself as MIPS co-maintainer.

Merge these:
2003-06-11  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

* configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
* configure. Regenerate.

2003-06-10  Nathanael Nerode  <neroden@gcc.gnu.org>

* configure.in: Disable serial configure by default.
* configure: Regenerate.
* Makefile.tpl: Abolish .NOTPARALLEL.
* Makefile.in: Regenerate.

2003-06-12  David Carlton  <carlton@kealia.com>

* symtab.c (lookup_symbol_aux_minsyms): Replace
DEPRECATED_SYMBOL_NAME by SYMBOL_LINKAGE_NAME.
(find_pc_sect_line, search_symbols, rbreak_command): Ditto.
(COMPLETION_LIST_ADD_SYMBOL): Rewrite in terms of
SYMBOL_NATURAL_NAME.

* Makefile.in (tuiDisassem.o): Update dependencies.

tui:
* tuiSource.c (tuiVerticalSourceScroll): Use get_frame_pc.
* tuiSourceWin.c (tuiHorizontalSourceScroll): Likewise.
* tuiStack.c (tui_get_function_from_frame): Likewise.
(tuiShowFrameInfo): Likewise.
* tuiWin.c (_makeVisibleWithNewHeight): Likewise.
* tui-hooks.c (tui_selected_frame_level_changed_hook): Likewise.
* tuiDisassem.c (tuiVerticalDisassemScroll): Likewise.
Include "disasm.h".

2003-06-12  David Carlton  <carlton@bactrian.org>

* symtab.h: Delete declaration of make_symbol_overload_list.
Add declaration of lookup_partial_symbol.
* symtab.c (remove_params): Move to cp-support.c.
(overload_list_add_symbol, make_symbol_overload_list)
(sym_return_val_size, sym_return_val_index): Ditto.
(lookup_partial_symbol): Make extern.
* cp-support.h: Add declaration of make_symbol_overload_list.
* cp-support.c: Include dictionary.h, objfiles.h, frame.h,
symtab.h, and block.h.
(remove_params): Move here from symtab.c.
(overload_list_add_symbol, make_symbol_overload_list)
(sym_return_val_size, sym_return_val_index): Ditto.
* valops.c: Include cp-support.h.
* Makefile.in (cp-support.o): Depend on dictionary_h, objfiles_h,
frame_h, and block_h.
(valops.o): Depend on cp_support_h.

2003-06-12  H.J. Lu <hongjiu.lu@intel.com>

* config.guess: Update to 2003-06-06 version.
* config.sub: Update to 2003-06-06 version.

* doc/as.texinfo (Comm): Added @node.  Moved before CFI
directives node.

* h8300-tdep.c: Add H8SX registers. Drop E_NUM_REGS entirely,
substitute by NUM_REGS throughout.
(h8300_register_name): Only care for H8/300 and H8/300H registers.
(h8300s_register_name): New function for H8S registers.
(h8300sx_register_name): Ditto for H8SX registers.
(h8300_print_register): Revise register printing, avoid depending
on 32 bit long.
(h8300_register_byte); Only care for H8/300 registers.
(h8300h_register_byte): New function for any other architecture.
(h8300_register_raw_size): Remove.
(h8300_register_virtual_type): Revise to return actually useful
type.
(h8300_extract_struct_value_address): Only care for H8/300 registers.
(h8300h_extract_struct_value_address): New function for any other
architecture.
(h8300_gdbarch_init): Add h8300sxn.  Call set_gdbarch_num_regs,
set_gdbarch_register_name, set_gdbarch_register_byte,
set_gdbarch_ptr_bit and set_gdbarch_addr_bit architecture dependent.
Remove calls to set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_bytes, set_gdbarch_register_raw_size,
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_register_virtual_size and
set_gdbarch_deprecated_max_register_virtual_size entirely.
Call set_gdbarch_long_long_bit, set_gdbarch_double_bit and
set_gdbarch_long_double_bit.

* gdb.base/fileio.exp: Run only on remote targets.

Add new switch to objcopy: --add-gnu-debuglink=<file>
Allows packages to be shipped in two forms, a stripped executable and debug
info file.

(i[3-7]86-*-openbsd[0-2].* | i[3-7]86-*-openbsd3.[0-3]): New target (was i[3-7]86-*-openbsd* before).
(i[3-7]86-*-openbsd*): Change to use bfd_elf32_i386_vec.
(vax-*-openbsd*): New target.

* configure.tgt (mips*-sgi-irix6*): Add the o32 and n64 emulations
to $targ_extra_libpath.

* config/tc-mips.c (append_insn): In a compound relocation, take the
field width from the final (outermost) operator.

daily update

*** empty log message ***

2003-06-11  Jeff Johnston  <jjohnstn@redhat.com>

        * doublest.c (convert_doublest_to_floatformat): When dealing
        with the implied integer bit, only alter mant_bits if we are
        processing a full 32 bits of mantissa.

2003-06-11  David Carlton  <carlton@bactrian.org>

* dictionary.h: New.
* dictionary.c: New.
* block.h: Add opaque declaration for struct dictionary.
(struct block): Add 'dict' member; delete 'hashtable', 'nsyms',
'sym' members.
(BLOCK_DICT): New macro.
Delete macros BLOCK_HASHTABLE, BLOCK_NSYMS, BLOCK_SYM,
BLOCK_BUCKETS, BLOCK_BUCKET, BLOCK_HASHTABLE_SIZE,
BLOCK_SHOULD_SORT.
(ALL_BLOCK_SYMBOLS): Update definition.
* Makefile.in (SFILES): Add dictionary.c.
(dictionary_h): New.
(COMMON_OBS): Add dictionary.o.
(dictionary.o): New.
(ada-lang.o): Depend on dictionary_h.
(buildsym.o, coffread.o, jv-lang.o, mdebugread.o, objfiles.o)
(stack.o, symmisc.o, symtab.o, tracepoint.o, valops.o)
(mi-cmd-stack.o): Ditto.
(gdbtk-cmds.o): Update dependencies.
(gdbtk-stack.o): Ditto.
* ada-lang.c: Include dictionary.h.
(symtab_for_sym): Update uses of ALL_BLOCK_SYMBOLS.
(fill_in_ada_prototype, debug_print_block): Ditto.
(ada_add_block_symbols): Update uses of ALL_BLOCK_SYMBOLS; replace
explicit iteration by use of ALL_BLOCK_SYMBOLS.  Delete variable
'is_sorted'.
* mdebugread.c: Include dictionary.h.
(struct parse_stack): Delete 'maxsyms' member.
(parse_symbol): Update calls to new_block.  Delete calls to
shrink_block.  Use dictionary methods.
(psymtab_to_symtab_1): Delete calls to sort_symtab_syms.
Update calls to new_symtab.  Don't maintain maxsyms data.
(mylookup_symbol): Update use of ALL_BLOCK_SYMBOLS.
(add_symbol): Just call dict_add_symbol.
(new_symtab): Delete 'maxsyms' argument.
(new_symtab): Update calls to new_block.
(new_block): Delete 'maxsyms' argument; add 'function' argument.
(shrink_block): Delete function.
(fixup_sigtramp): Update call to new_block.  Add symbol via
dict_add_symbol.
* jv-lang.c: Include dictionary.h.
(get_java_class_symtab): Set the BLOCK_DICT of the blocks
appropriately.  Set class_symtab->free_func.  Make sure the
blockvector is big enough to hold two blocks.
(add_class_symtab_symbol): Use dictionary methods.
(free_class_block): New function.
(type_from_class): Replace explicit iteration by
ALL_BLOCK_SYMBOLS.
* symtab.h (struct symtab): Replace 'free_ptr' method by
'free_func'.
* dwarf2read.c (psymtab_to_symtab_1): Delete call to
sort_symtab_syms.
* dwarfread.c (psymtab_to_symtab_1): Delete call to
sort_symtab_syms.
* coffread.c (coff_symfile_read): Delete call to sort_symtab_syms.
Include dictionary.h.
(patch_opaque_types): Update use of ALL_BLOCK_SYMBOLS.
* dbxread.c (dbx_psymtab_to_symtab_1): Delete call to
sort_symtab_syms.
* objfiles.c: Include dictionary.h.
(objfile_relocate): Update use of ALL_BLOCK_SYMBOLS.
* buildsym.c: Include dictionary.h.
(finish_block): Use dictionary methods.
(end_symtab): Set free_func to NULL, not free_ptr.
* tracepoint.c: Include dictionary.h.
(add_local_symbols): Update use of ALL_BLOCK_SYMBOLS.
(scope_info): Ditto.
* stack.c: Include dictionary.h.
(print_block_frame_locals): Update use of ALL_BLOCK_SYMBOLS.
(print_block_frame_labels, print_frame_arg_vars)
(print_frame_args): Ditto.
* symmisc.c (free_symtab_block): Use dictionary methods.
(dump_symtab): Ditto.
(free_symtab): Replace use of 'free_ptr' by 'free_func'.
Include dictionary.h.
* symfile.h: Delete declarations of sort_block_syms,
sort_symtab_syms.
* symfile.c (sort_block_syms): Delete.
(sort_symtab_syms): Delete.
* symtab.c: Include dictionary.h.
(lookup_block_symbol): Use dictionary iterators.
(find_pc_sect_symtab): Update use of ALL_BLOCK_SYMBOLS.
(search_symbols, make_symbol_completion_list): Ditto.
(make_symbol_overload_list): Ditto.
* valops.c (value_of_local): Use dict_empty.
Include dictionary.h.

2003-06-11  David Carlton  <carlton@bactrian.org>

* generic/gdbtk-stack.c: Include dictionary.h.
(gdb_block_vars): Update use of ALL_BLOCK_SYMBOLS.
(gdb_get_blocks, gdb_get_vars_command): Ditto.
* generic/gdbtk-cmds.c: Include dictionary.h.
(gdb_listfuncs): Update use of ALL_BLOCK_SYMBOLS.

2003-06-11  David Carlton  <carlton@bactrian.org>

* mi-cmd-stack.c: Include dictionary.h.
(list_args_or_locals): Update use of ALL_BLOCK_SYMBOLS.

    * dw2gencfi.c (struct cfi_escape_data): New.
        (cfi_add_CFA_nop): Remove.
        (CFI_escape, dot_cfi_escape): New.
        (dot_cfi): Remove nop.
        (cfi_pseudo_table): Remove nop; add escape.
        (output_cfi_insn): Likewise.
        (select_cie_for_fde): Stop on escape.
        * dw2gencfi.h (cfi_add_CFA_nop): Remove.
        * read.c, read.h (do_parse_cons_expression): New.
        * doc/as.texinfo (.cfi_escape): New.

        * gas/cfi/cfi-common-3.[ds]: New.
        * gas/cfi/cfi.exp: Run it.

* ld-mips-elf/relax-jalr.s: Fix testsuite breakage.
* ld-mips-elf/relax-jalr-n32.d: Likewise.
* ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* ld-mips-elf/relax-jalr-n64.d: Likewise.
* ld-mips-elf/relax-jalr-n64-shared.d: Likewise.

    * win32-nat.c (solib_symbols_add): Fix a small compilation error.

2003-06-11  David Carlton  <carlton@bactrian.org>

* block.h (BLOCK_SHOULD_SORT): Delete.
* symtab.c (lookup_block_symbol): Don't worry about sorted linear
blocks.
* ada-lang.c (ada_add_block_symbols): Ditto.
* symfile.c (sort_block_syms): Delete.
(sort_symtab_syms): Ditto.
* symfile.h: Delete sort_symtabs_syms and sort_block_syms
declarations.
* coffread.c (coff_symfile_read): Don't call sort_symtab_syms.
* dbxread.c (dbx_psymtab_to_symtab_1): Ditto.
* dwarf2read.c (psymtab_to_symtab_1): Ditto.
* dwarfread.c (psymtab_to_symtab_1): Ditto.
* hpread.c (hpread_psymtab_to_symtab_1): Ditto.
* mdebugread.c (psymtab_to_symtab_1): Ditto.
* xcoffread.c (xcoff_psymtab_to_symtab_1): Ditto.

2003-06-11  Jeff Johnston  <jjohnstn@redhat.com>

        * ia64-tdep.c (ia64_gdbarch_init): Set number of long double
        bits to 128.

* elfxx-mips.c (MIPS_ELF_OPTIONS_SECTION_NAME): Use .MIPS.options
for n32, too.
(MIPS_ELF_STUB_SECTION_NAME): Use .MIPS.stubs for n32, too.
(mips_elf_rel_dyn_section): Use appropriate section alignment.
(mips_elf_create_got_section): Likewise.
(_bfd_mips_elf_create_dynamic_sections): Likewise.
* ld-mips-elf/multi-got-1.d: Adjust addresses.
* ld-mips-elf/rel32-n32.d: Likewise.

* config/tc-mips.c (s_cpsetup): Use mips_frame_reg instead of SP.
(s_cprestore): Likewise.
(s_cpreturn): Likewise.

* config/tc-mips.c (tc_gen_reloc): Initialize retval amd reloc
with zeros.

2003-06-11  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (DEPRECATED_REGISTER_CONVERTIBLE): Deprecate
REGISTER_CONVERTIBLE.
(DEPRECATED_REGISTER_CONVERT_TO_VIRTUAL): Same.
(DEPRECATED_REGISTER_CONVERT_TO_RAW): Same, make "from" constant.
* gdbarch.h, gdbarch.c: Re-generate.
* arch-utils.h (deprecated_register_convertible_not): Rename
generic_register_convertible_not.
* arch-utils.c (deprecated_register_convertible_not): Rename
generic_register_convertible.
(legacy_convert_register_p, legacy_register_to_value): Update.
* sh-tdep.c (sh64_push_arguments): Update.
* m68klinux-tdep.c (m68k_linux_extract_return_value): Update.
* config/m68k/tm-delta68.h (DEPRECATED_EXTRACT_RETURN_VALUE): Update.
* m68klinux-tdep.c (m68k_linux_store_return_value): Update.
* config/m68k/tm-delta68.h (DEPRECATED_STORE_RETURN_VALUE): Update.
* arch-utils.c (legacy_value_to_register): Update.
* rs6000-tdep.c (rs6000_gdbarch_init): Update.
(rs6000_register_convert_to_raw): Make parameter "from" const.
* mips-tdep.c (mips_gdbarch_init): Update.
(mips_register_convert_to_raw): Make  parameter"virt_buf" const.
* infcmd.c (default_print_registers_info): Update.
* ia64-tdep.c (ia64_gdbarch_init): Update.
(ia64_register_convert_to_raw): Make parameter "from" const.
* i386-tdep.c (i386_gdbarch_init): Update.
(i386_register_convert_to_raw): Update.

* elf32-mips.c (mips_elf_generic_reloc): New Function.
(elf_mips_howto_table_rel): Use it.
(gprel32_with_gp): Move prototype.
(mips_elf_hi16_reloc): Check for ! BSF_LOCAL instead of zero addend.
Use mips_elf_generic_reloc.
(mips_elf_got16_reloc): Check for ! BSF_LOCAL instead of zero addend.
Code cleanup.
(_bfd_mips_elf32_gprel16_reloc): Check for ! BSF_LOCAL instead of
zero addend.
(mips_elf_gprel32_reloc): Likewise. Use the same GP assignment logic
as in the other *_gprel*_reloc functions.
(gprel32_with_gp): Handle partial_inplace properly.
(mips32_64bit_reloc): Use mips_elf_generic_reloc.
(mips16_gprel_reloc): Check for ! BSF_LOCAL instead of zero addend.
Do addend handling directly instead of calling
_bfd_mips_elf_gprel16_with_gp. Handle partial_inplace properly.
* elf64-mips.c (mips_elf64_hi16_reloc): Check for ! BSF_LOCAL instead
of zero addend. Handle partial_inplace properly.
(mips_elf64_got16_reloc): Check for ! BSF_LOCAL instead of zero
addend.
(mips_elf64_gprel16_reloc): Likewise.
(mips_elf64_literal_reloc): Likewise.
(mips_elf64_gprel32_reloc): Likewise. Use the same GP assignment
logic as in the other *_gprel*_reloc functions. Handle
partial_inplace properly.
(mips_elf64_shift6_reloc): Check for ! BSF_LOCAL instead of zero
addend. Handle partial_inplace properly.
(mips16_gprel_reloc): Likewise. Do addend handling directly instead
of calling _bfd_mips_elf_gprel16_with_gp.
* elfn32-mips.c (mips_elf_got16_reloc): Check for BSF_LOCAL.
(mips_elf_gprel32_reloc): Check for ! BSF_LOCAL instead
of zero addend.
(mips_elf_shift6_reloc): Handle partial_inplace properly.
(mips16_gprel_reloc): Likewise. Do addend handling directly instead
of calling _bfd_mips_elf_gprel16_with_gp.
* elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Handle
partial_inplace properly. Fix wrong addend handling. Fix overflow
check.
(_bfd_mips_elf_sign_extend): Renamed from mips_elf_sign_extend and
exported.
(mips_elf_calculate_relocation): Use _bfd_mips_elf_sign_extend.
(_bfd_mips_elf_relocate_section): Likewise.
(mips_elf_create_dynamic_relocation): Update sec_info_type access.
* elfxx-mips.h (_bfd_mips_relax_section): Fix prototype declaration.
(_bfd_mips_elf_sign_extend): New prototype.
* config/tc-mips.c (md_pcrel_from): Return actual pcrel address.
(md_apply_fix3): Ignore non-special relocations. Remove superfluous
exceptions from size assert. Remove most of the addend fixup
specialcasing. Remove value, use valP directly. simplify fx_addnumber
handling. Remove zero addend specialcases.
(tc_gen_reloc): Use appropriate value for reloc2 addend. Remove
the addend fixup specialcase.
* config/tc-mips.h (MD_APPLY_SYM_VALUE): Define as 0.

2003-06-11  Andrew Cagney  <cagney@redhat.com>

* remote-fileio.c: Include "remote-fileio.h".
* Makefile.in (remote-fileio.o): Update dependencies.
(remote_fileio_h): Fix typo.

* configure.in (vax-*-openbsd*): Set COREFILE to netbsd-core.lo.
* configure: Regenerate.

* config.bfd (sparc-*-openbsd[0-2].* | sparc-*-openbsd3.[0-1]): New target
  (was sparc-*-openbsd* before).
  (sparc-*-openbsd*): Change to use bfd_elf32_sparc_vec.

2003-06-11  Andrew Cagney  <cagney@redhat.com>

* xstormy16-tdep.c (xstormy16_push_return_address): Make static.
(xstormy16_save_dummy_frame_tos): Make static.
(_initialize_xstormy16_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* v850-tdep.c: Make local functions static.
(_initialize_v850_tdep): Add declaration.
* sparc-tdep.c: Make local functions static.
(_initialize_sparc_tdep): Add declaration.
* sh-tdep.c: Make local functions static.
(_initialize_sh_tdep): Add declaration.
* sh3-rom.c (_initialize_sh3_rom): Add declaration.
* s390-tdep.c: Make local functions static.
(_initialize_s390_tdep): Add declaration.
* dbxread.c (find_stab_function_addr): Make static.
* ppc-bdm.c (_initialize_bdm_ppc): Add declaration.
* ocd.c (_initialize_remote_ocd): Add declaration.
* dink32-rom.c (_initialize_dink32_rom): Add declaration.
* ppcbug-rom.c (_initialize_ppcbug_rom): Add declaration.
* ns32k-tdep.c (_initialize_ns32k_tdep): Add declaration.
* ns32knbsd-tdep.c (_initialize_ns32knbsd_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* remote-array.c (_initialize_array): Add declaration.
(_initialize_remote_monitors): Add declaration.
* remote-mips.c: Make local functions static.
(_initialize_remote_mips): Add declaration.
* mcore-tdep.c: Make all local functions static.
(_initialize_mcore_tdep): Add declaration.
* dbug-rom.c (_initialize_dbug_rom): Add declaration.
* abug-rom.c (_initialize_abug_rom): Add declaration.
* rom68k-rom.c (_initialize_rom68k): Add declaration.
* cpu32bug-rom.c (_initialize_cpu32bug_rom): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* remote-est.c (_initialize_est): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
(m68hc11_call_dummy_address): Make static.
* ia64-tdep.c: Make local functions static.
(_initialize_ia64_tdep): Add declaration.
* solib-legacy.c (_initialize_svr4_lm): Add declaration.
* monitor.c (monitor_wait_filter): Make static.
(_initialize_remote_monitors): Add declaration.
* remote-hms.c (_initialize_remote_hms): Add declaration.
* remote-e7000.c (fetch_regs_from_dump): Make static.
(expect_n): Make static.
(_initialize_remote_e7000): Add declaration.
* ser-e7kpc.c: Always include "defs.h".
(_initialize_ser_e7000pc): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* cris-tdep.c: Make all but one function static.
(_initialize_cris_tdep): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib.c (update_solib_list): Make static.
(_initialize_solib): Add declaration.
* avr-tdep.c (avr_breakpoint_from_pc): Make static.
(_initialize_avr_tdep): Add declaration.
* remote-rdi.c (voiddummy): Make static.
(_initialize_remote_rdi): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* remote-rdp.c (send_rdp): Make static.
(_initialize_remote_rdp): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.

* write.c (write_relocs): Use xcalloc. Fix relocs initialization
in the RELOC_EXPANSION_POSSIBLE case.

* remote-fileio.c: Make ari happy.

* ld-srec/srec.exp (run_srec_test): Remove powerpc64 xfails, and
xfail for hppa duplicated elsewhere.

* config/tc-i960.c (line_comment_chars): Add '#'.
* config/tc-mn10200.c (tc_gen_reloc): Don't ignore fx_subsy.

* gas/macros/app1.d: Ignore section symbols.
* gas/macros/app2.d: Likewise.
* gas/macros/app3.d: Likewise.
* gas/macros/app4.d: Likewise.

bfd/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

binutils/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

gas/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

gprof/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

ld/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

opcodes/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

*** empty log message ***

daily update

* bfd/Makefile.am (config.status): Depend on version.h.
Run "make dep-am" in bfd/ and elsewhere, and regen files.

* Makefile.am (ALL_EMULATIONS): Add em32relf.o.
* Makefile.in: Regenerate.

* Makefile.tpl: Replace {build,host,target}_canonical by
{build,host,target}.
* Makefile.in: Regenerate.

opcodes:
* cgen-asm.in (@arch@_cgen_assemble_insn): CGEN_INSN_RELAX renamed to
CGEN_INSN_RELAXED.
* fr30-asm.c,fr30-desc.c,fr30-desc.h: Regenerate.
* frv-asm.c,frv-desc.c,frv-desc.h: Regenerate.
* ip2k-asm.c,ip2k-desc.c,ip2k-desc.h: Regenerate.
* iq2000-asm.c,iq2000-desc.c,iq2000-desc.h: Regenerate.
* m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-opc.c: Regenerate.
* openrisc-asm.c,openrisc-desc.c,openrisc-desc.h: Regenerate.
* xstormy16-asm.c,xstormy16-desc.c,xstormy16-desc.h: Regenerate.
gas:
* cgen.c (gas_cgen_finish_insn): CGEN_INSN_RELAX renamed to
CGEN_INSN_RELAXED.
* config/tc-fr30.c (md_estimate_size_before_relax): Ditto.
* config/tc-m32r.c (md_estimate_size_before_relax): Ditto.
* config/tc-openrisc.c (md_estimate_size_before_relax): Ditto.

* frv.cpu: Add IDOC attribute.

    * rs6000-nat.c (child_xfer_memory): Compute the right address when
        fetching the trailing bytes of the buffer we are about to write.

* gas/mips/mips.exp: Fix typo.
* gas/mips/elempic.d: Force o64 ABI.
* gas/mips/telempic.d: Likewise.
* ld-mips-elf/rel32-n32.d: Force big endian assembly.
* ld-mips-elf/rel32-o32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.

Merge the separate remote-fileio changelogs so that they reflect reality.

2003-06-10  Andrew Cagney  <cagney@redhat.com>

* remote-fileio.h (REMOTE_FILEIO_H): Replace FILEIO_H.
* Makefile.in (remote-fileio.o): Update dependencies.
* remote-fileio.c: Include "gdb_wait.h" and "gdb_stat.h".  Do not
include <setjmp.h>, or <sys/types.h> conditional on USG.
(remote_fio_jmp_buf): Delete global variable.

* gdb.base/fileio.c: New file, testing File-I/O.
* gdb.base/fileio.exp: Ditto.

* Makefile.in: Add dependencies for remote-fileio.o.
* remote-fileio.c: New file implementing the remote File-I/O protocol.
* remote-fileio.h: New header file defining remote File-I/O interface.
* remote.c (remote_write_bytes, remote_read_bytes): Remove
static storage class.
(remote_wait, remote_async_wait): Call remote_fileio_request() on
'F' packet.
(_initialize_remote): Call initialize_remote_fileio().
* remote.h: Declare remote_write_bytes() and remote_read_bytes().

* Makefile.in (REMOTE_OBS): Add remote-fileio.o
(SFILES): Add remote-fileio.c.
Add dependencies for building remote-fileio.o.  Add remote-fileio.h to
dependencies for building remote.o.
* defs.h: Declare gdb_stdin, gdb_stdtargerr and gdb_stdtargin.
* main.c: New ui_file gdb_stdin, gdb_stdtargerr and gdb_stdtargin.
(captured_main): Initialize new ui_files.
* ui-file.c: Add read and fgets input functions.
(ui_file_new): set ui_file_fputs and ui_file_read to null functions.
(null_file_read): New function.
(ui_file_read): New function.
(set_ui_file_read): New function.
(stdio_file_read): New function.
* ui-file.h: New type ui_file_read_ftype.
(set_ui_file_read): Declare.
(ui_file_read): Declare.

* gdb/fileio.h: New file.

* Makefile.tpl: Fix stupid pasto.
* Makefile.in: Regenerate.

* gas/cfi/cfi.exp: Use here.  Only run tests when ELF.
* gas/macros/and.s: Avoid .set so we don't break mips.

* gas/macros/and.s: Avoid .set so we don't break mips.

* gas/macros/and.s: New.
* gas/macros/macros.exp: Assemble it.

* scripttempl/h8300sxn.sc: New file.

Add "attn", "lq" and "stq" power4 insns.

include/opcode/
* h8300.h (IMM4_NS, IMM8_NS): New.
(h8_opcodes): Replace IMM4 with IMM4_NS in mov.b and mov.w entries.
Likewise IMM8 for mov.w and mov.l.  Likewise IMM16U for mov.l.

gas/testsuite
* gas/h8300/h8sx_mov_imm.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

opcodes/
* h8300-dis.c (bfd_h8_disassemble): Don't print brackets round
rts/l and rte/l register lists.

gas/
* config/tc-h8300.c (get_rtsl_operands): Accept unbracketed register
lists.  Allow single-register ranges.

testsuite/
* gas/h8300/h8sx_rtsl.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

* gas/h8300/h8sx_disp2.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

Fix last changelog.

include/elf/
* h8.h (E_H8_MACH_H8300SXN): New flag.

bfd/
* archures.c (bfd_mach_h8300sxn): New architecture.
* bfd-in2.h: Regenerate.
* cpu-h8300.c (h8300_scan): Check for 'sxn'.
(h8300sxn_info_struct): New.
(h8300sx_info_struct): Link to it.
* elf32-h8300.c (elf32_h8_mach): Add h8300sxn case.
(elf32_h8_final_write_processing): Likewise.

gas/
* config/tc-h8300.c (h8300sxnmode): New.
(md_pseudo_table): Add .h8300sxn entry.  Sync others with FSF version.

ld/
* configure.tgt (h8300*): Add h8300sxn emulations.
* Makefile.am (ALL_EMULATIONS): Add eh8300sxn.o and eh8300sxnelf.o.
(eh8300sxn.c, eh8300sxnelf.c): New rules.
* Makefile.in: Regenerate.
* emulparams/h8300sxnelf.sh, emulparams/h8300sxn.sh: New files.

2003-06-09  H.J. Lu <hongjiu.lu@intel.com>

* NEWS: Updated for the new -n option for the i386 assembler.

* config/tc-i386.c (optimize_align_code): New.
(md_shortopts): Add 'n'.
(md_parse_option): Handle 'n'.
(md_show_usage): Add '-n'.

* config/tc-i386.h (optimize_align_code): Declared.
(md_do_align): Optimize code alignment only if optimize_align_code
is not 0.

* doc/as.texinfo: Add the new -n option.

* doc/c-i386.texi: Document the new -n option.

* ld-elfvsb/elfvsb.exp: Run for powerpc64 too.
* ld-powerpc/tls.t: Update.
* ld-powerpc/tlsexe.d: Update.
* ld-powerpc/tlsexe.r: Update.
* ld-powerpc/tlsexetoc.d: Update.
* ld-powerpc/tlsexetoc.r: Update.
* ld-powerpc/tlsexetoc.t: Update.
* ld-powerpc/tlsso.d: Update.
* ld-powerpc/tlsso.g: Update.
* ld-powerpc/tlsso.r: Update.
* ld-powerpc/tlsso.t: Update.
* ld-powerpc/tlstocso.d: Update.
* ld-powerpc/tlstocso.g: Update.
* ld-powerpc/tlstocso.r: Update.
* ld-powerpc/tlstocso.t: Update.

* emulparams/elf64ppc.sh (EXECUTABLE_SYMBOLS, OTHER_BSS_END_SYMBOLS,
CTOR_START, CTOR_END, DTOR_START, DTOR_END): Don't define.

* Makefile.tpl: Remove bogus conditional.
* Makefile.in: Regenerate.

*** empty log message ***

daily update

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* frame.h (deprecated_unwind_get_saved_register): Rename
generic_unwind_get_saved_register, update comments.
* mips-tdep.c (mips_get_saved_register): Update.
* frame.c (deprecated_unwind_get_saved_register): Update.

Shared-object relocation tests

* gdb.texinfo (Separate Debug Files): Remove extra semicolon.

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* vax-tdep.c (vax_frame_locals_address): Delete function.
(vax_gdbarch_init): Do not set frame_locals_address.
* m68hc11-tdep.c (m68hc11_frame_locals_address): Delete function.
(m68hc11_gdbarch_init): Do not set frame_locals_address.
* s390-tdep.c (s390_frame_args_address): Delete function.
(s390_gdbarch_init): Do not set frame_args_address or
frame_locals_address.
* ns32k-tdep.c (ns32k_frame_locals_address): Delete.
(ns32k_gdbarch_init): Do not set frame_locals_address.
* hppa-tdep.c (hppa_frame_args_address): Delete function.
(hppa_frame_locals_address): Delete function.
(hppa_gdbarch_init): Do not set frame_args_address, or
frame_locals_address.
* arm-tdep.c (arm_frame_args_address): Delete.
(arm_frame_locals_address): Delete.
(arm_gdbarch_init): Do not set frame_args_address, or
frame_locals_address.

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (FRAME_NUM_ARGS): Change to function with predicate.
* gdbarch.h, gdbarch.c: Re-generate.
* arch-utils.h (frame_num_args_unknown): Delete both declarations.
* arch-utils.c (frame_num_args_unknown): Delete function.
* stack.c (print_args_stub): Use FRAME_NUM_ARGS_P.
(frame_info): Use FRAME_NUM_ARGS_P.
* arm-tdep.c (arm_frame_num_args): Delete function.
(arm_gdbarch_init): Do not set frame_num_args.
* config/pa/tm-hppa64.h (FRAME_NUM_ARGS): Delete.
* hppa-tdep.c (hppa_frame_num_args): Delete function.
(hppa_gdbarch_init): Do not set frame_num_args.
* config/sparc/tm-sparc.h (FRAME_NUM_ARGS): Delete.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Do not set
frame_num_args to default frame_num_args_unknown.
* v850-tdep.c (v850_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* s390-tdep.c (s390_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mips-tdep.c (mips_gdbarch_init): Ditto.
* mcore-tdep.c (mcore_gdbarch_init): Ditto.
* m68k-tdep.c (m68k_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* i386-tdep.c (i386_gdbarch_init): Ditto.
* h8300-tdep.c (h8300_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* d10v-tdep.c (d10v_gdbarch_init): Ditto.
* cris-tdep.c (cris_gdbarch_init): Ditto.
* avr-tdep.c (avr_gdbarch_init): Ditto.
* alpha-tdep.c (alpha_gdbarch_init): Ditto.

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* printcmd.c (print_frame_nameless_args): Moved to "stack.c".
(print_frame_args): Moved to "stack.c".
* stack.c: Include "gdb_assert.h".
(print_frame_nameless_args): Moved from "printcmd.c", made static.
(print_frame_args): Moved from "printcmd.c".
* frame.h (print_frame_args): Delete declaration.
* Makefile.in (stack.o): Update dependencies.

Really delete frame_args_address from
* vax-tdep.c (vax_frame_args_address_correct): Delete.
(vax_frame_args_address): Merge in vax_frame_args_address_correct.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* frame.c (get_prev_frame): Remove reference to
frame_args_address_correct in comments.
* frame-base.c (default_frame_args_address): Delete code
conditional on FRAME_ARGS_ADDRESS_CORRECT.
* vax-tdep.c (vax_frame_args_address_correct): Delete.
(vax_frame_args_address): Merge in vax_frame_args_address_correct.
* config/vax/tm-vax.h (FRAME_ARGS_ADDRESS_CORRECT): Delete
(vax_frame_args_address_correct): Delete declaration.

Index: doc/ChangeLog
2003-06-08  Andrew Cagney  <cagney@redhat.com>

* gdbint.texinfo (Target Architecture Definition): Delete
documentation on FRAME_ARGS_ADDRESS_CORRECT.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (UNWIND_SP): Add.
* gdbarch.h, gdbarch.c: Re-generate.
* frame.c (frame_sp_unwind): New function.
(get_frame_sp): New function.
* frame.h (get_frame_sp, frame_sp_unwind): Declare.
* regcache.c (read_sp): Rewrite, try each of TARGET_READ_SP,
gdbarch_unwind_sp and SP_REGNUM when looking for the SP register
value.
* d10v-tdep.c (d10v_unwind_sp): Replace d10v_read_sp.
(d10v_gdbarch_init): Set unwind_sp instead of read_sp.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* gdbint.texinfo (Target Architecture Definition): Document
"unwind_sp".  Cross reference "unwind_sp" and TARGET_READ_SP.

*** empty log message ***

daily update

2003-06-08  Andrew Cagney  <cagney@redhat.com>

Deprecate BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT and
REMOTE_BREAKPOINT.
* remote.c: Update.
* config/sh/tm-sh.h (DEPRECATED_BIG_REMOTE_BREAKPOINT): Update.
(DEPRECATED_LITTLE_REMOTE_BREAKPOINT): Update.
* config/m68k/tm-sun3.h: Update.
* config/m68k/tm-m68klynx.h: Update.
* config/h8300/tm-h8300.h (DEPRECATED_REMOTE_BREAKPOINT): Update.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* trad-frame.h (struct trad_frame_saved_reg): Rename "struct
trad_frame".  Update comments.
* d10v-tdep.c (struct d10v_unwind_cache): Update.
* trad-frame.c (trad_frame_alloc_saved_regs): Update.
(trad_frame_register_value, trad_frame_prev_register): Update.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* acinclude.m4 (gcc_AC_CHECK_DECL, (gcc_AC_CHECK_DECL): Stolen
from GCC's acinclude.m4.
* configure.in: Check for getopt's delcaration.
* aclocal.m4, config.in, configure: Re-generate.
* main.c (error_init): Delete declaration.
* defs.h (error_init): Declare.
* rs6000-tdep.c (rs6000_fetch_pointer_argument): Make static.
(rs6000_convert_from_func_ptr_addr): Make static.
(_initialize_rs6000_tdep): Add declaration.
* cli/cli-cmds.c (dont_repeat): Delete declaration.
(show_commands, set_verbose, show_history): Delete declaration.
* top.h (set_verbose): Add declaration.
(show_history, set_history, show_commands): Add declaration.
(do_restore_instream_cleanup): Add declaration.
* objc-lang.c (specialcmp): Make static.
(print_object_command): Make static.
(find_objc_msgsend): Make static.
(find_objc_msgcall_submethod_helper): Make static.
(find_objc_msgcall_submethod): Make static.
(_initialize_objc_language): Add declaration.
(find_implementation_from_class): Make static.
(find_implementation): Make static.
* objc-exp.y (yylex): Delete lookup_struct_typedef declaration.
* objc-lang.h (lookup_struct_typedef): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-script.c (clear_hook_in_cleanup): Make static.
(do_restore_user_call_depth): Make static.
(do_restore_instream_cleanup): Delete declaration.
(dont_repeat): Delete declaration.
* cli/cli-decode.c (add_abbrev_cmd): Delete function.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* hpacc-abi.c (_initialize_hpacc_abi): Add declaration.
* gnu-v3-abi.c (gnuv3_baseclass_offset): Make static.
(_initialize_gnu_v3_abi): Add declaration.
* gnu-v2-abi.c (gnuv2_value_rtti_type): Make static.
(_initialize_gnu_v2_abi): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* doublest.c (floatformat_from_length): Make static.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (create_sentinel_frame): Make static.
(_initialize_frame): Add declaration.
* top.c (do_catch_errors): Make static.
(gdb_rl_operate_and_get_next_completion): Make static.
* typeprint.c: Include "typeprint.h".
* sentinel-frame.c (sentinel_frame_prev_register): Make static.
(sentinel_frame_this_id): Make static.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* ui-out.c (make_cleanup_ui_out_begin_end): Delete function.
* dwarf2-frame.c (dwarf2_frame_cache): Make static.
* p-exp.y (push_current_type, pop_current_type): ISO C declaration.
* dwarf2expr.h (dwarf_expr_context): ISO C declaration.
* maint.c (maintenance_print_architecture): Make static.
* signals/signals.c (_initialize_signals): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* jv-exp.y (push_variable): ISO C definition.
(push_qualified_expression_name): Ditto.
* memattr.c (_initialize_mem): Add declaration.
* remote.c (remote_check_watch_resources): Make static.
(remote_stopped_by_watchpoint): Make static.
(remote_stopped_data_address): Make static.
* d10v-tdep.c (nr_dmap_regs): Make static.
(a0_regnum): Make static.
(d10v_frame_unwind_cache): Make static.
(d10v_frame_p): Make static.
* osabi.c (show_osabi): Make static.
(_initialize_gdb_osabi): Add extern declaration.
* gdbtypes.c (make_qualified_type): Make static.
(safe_parse_type): Make static.
* macrocmd.c (_initialize_macrocmd): Add extern declaration.
* macrotab.c (macro_bcache_free): Make static.
* interps.c (interp_set_quiet): Make static.
(interpreter_exec_cmd): Make static.
* stack.h (select_frame_command): New file.
* stack.c: Include "stack.h".
(select_frame_command_wrapper): Delete function.
(select_frame_command): Make global.
* infcall.c: Include "infcall.h".
* linespec.c: Include "linespec.h".
* symfile.c (sections_overlap): Make static.
* cp-support.h (cp_initialize_namespace): ISO C declaration.
* charset.c (_initialize_charset): Add missing prototype.
* regcache.c (init_legacy_regcache_descr): Make static.
(do_regcache_xfree): Make static.
(regcache_xfer_part): Make static.
(_initialize_regcache): Add missing prototype.
* breakpoint.c (parse_breakpoint_sals): Make static.
(breakpoint_sals_to_pc): Make static.
* interps.h (clear_interpreter_hooks): ISO C declaration.
* Makefile.in (stack_h): Define.
(stack.o, typeprint.o, mi-main.o): Update dependencies.
(mi-cmd-stack.o, infcall.o, linespec.o): Update dependencies.

Index: mi/ChangeLog
2003-06-08  Andrew Cagney  <cagney@redhat.com>

* mi-parse.c (_initialize_mi_parse): Delete function.
* mi-main.c: Include "mi-main.h".
* mi-interp.c (_initialize_mi_interp): Add declaration.
* mi-cmd-stack.c: Include "stack.h".
(select_frame_command_wrapper): Delete extern declaration.
(mi_cmd_stack_select_frame): Replace select_frame_command_wrapper
with select_frame_command.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* Makefile.in (d10v-tdep.o): Update dependencies.
(SFILES): Add trad-frame.c.
(trad_frame_h): Define.
(COMMON_OBS): Add trad-frame.o.
(trad-frame.o): Specify dependencies.
* d10v-tdep.c: Include "trad-frame.h".
(saved_regs_unwinder): Delete function.
(d10v_frame_prev_register): Use trad_frame_prev_register.
(struct d10v_unwind_cache): Change type of "saved_regs" to "struct
trad_frame", delete "regs" and "prev_sp".
(prologue_find_regs): Use trad-frame.
* trad-frame.h, trad-frame.c: New files.

* emultempl/ppc64elf.em (emit_stub_syms, toc_section): New vars.
(build_toc_list): New function.
(gld${EMULATION_NAME}_finish): Call build_toc_list and
ppc64_elf_reinit_toc.  Adjust ppc64_elf_build_stubs call.
(OPTION_STUBSYMS): Define.
(PARSE_AND_LIST_LONGOPTS): Add emit-stub-syms.
(PARSE_AND_LIST_OPTIONS): Document.
(PARSE_AND_LIST_ARGS_CASES): Handle.

* elf64-ppc.c: Move TARGET_LITTLE_SYM and other macros used by
elfxx-target.h so that we can use elf_backend_got_header_size.
(ELF_MACHINE_ALT1, ELF_MACHINE_ALT2): Delete.
(GLINK_CALL_STUB_SIZE): Modify.  Define new glink call stub and
associated macros.
(ppc64_elf_howto_raw <GOT_TPREL16_DS, GOT_TPREL16_LO_DS>): Correct
dst_mask.
(enum ppc_stub_type): Add ppc_stub_long_branch_r2off and
ppc_stub_plt_branch_r2off.
(struct ppc_stub_hash_entry): Reorganize.
(struct ppc_link_hash_table): Add no_multi_toc, multi_toc_needed,
toc_curr, toc_off and emit_stub_syms.
(ppc64_elf_link_hash_table_create): Init them.
(ppc_stub_name): Correct string size.
(ppc64_elf_check_relocs): Set has_gp_reloc on GOT and TOC relocs.
(ppc64_elf_size_dynamic_sections): Set no_multi_toc if GOT entries
used.
(ppc_type_of_stub): Tweak root.type test.
(build_plt_stub): Remove glink code.  Adjust for insn macro changes.
(ppc_size_one_stub): Handle ppc_stub_long_branch_r2off and
ppc_stub_plt_branch_r2off.
(ppc_build_one_stub): Likewise.  Fix var shadowing.  Correct addis,addi
range test.  Use toc_off to calculte r2 values.  Handle emit_stub_syms.
(ppc64_elf_setup_section_lists): Remove htab creator flavour test.
Initialize elf_gp and toc_curr.
(ppc64_elf_next_toc_section, ppc64_elf_reinit_toc): New functions.
(ppc64_elf_next_input_section): Set toc_off.
(group_sections): Ensure groups have the same TOC.
(ppc64_elf_size_stubs): Check whether we need a TOC adjusting stub.
(ppc64_elf_build_stubs): Add emit_stub_syms param, and stash in htab.
Build new glink stub.
(ppc64_elf_relocate_section): Handle multiple TOCs.  Fix comments.
(ppc64_elf_finish_dynamic_sections): Adjust DT_PPC64_GLINK.
* elf64-ppc.h (ppc64_elf_build_stubs): Update prototype.
(ppc64_elf_next_toc_section, ppc64_elf_reinit_toc): Declare.
* section.c (struct sec): Rename flag12 to has_gp_reloc.
(STD_SECTION): Update.
* ecoff.c (bfd_debug_section): Update comment.
* bfd-in2.h: Regenerate.

* gdb.base/readline.exp: Add tests for operate-and-get-next with a
fully filled history list.
* gdb.base/gdb_history: New file.

* gdb.base/signals.exp: XFAIL "continue to func1" on
i*86-*-freebsd*.

* gdb.base/attach.exp: When trying to attach to a nonexistent
process, make it possible to specify the PID based on the target,
and do so for *-*-freebsd*.