kernel/u-boot.git
12 years agotegra: Use funcmux for MMC on tamonten
Simon Glass [Wed, 11 Jan 2012 12:42:26 +0000 (12:42 +0000)]
tegra: Use funcmux for MMC on tamonten

Use the new funcmux_select() feature to set up the MMC pin mux.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Add SDMMC support to funcmux
Simon Glass [Wed, 11 Jan 2012 12:42:25 +0000 (12:42 +0000)]
tegra: Add SDMMC support to funcmux

This adds support for SDMMC ports to the funcmux. Only one
option is supported: FUNCMUXO_SDMMC_8BIT which selects an 8-bit
wide SDIO interface where available.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Add I2C support to funcmux
Simon Glass [Wed, 11 Jan 2012 12:42:24 +0000 (12:42 +0000)]
tegra: Add I2C support to funcmux

Add support to funcmux for selecting I2C functions and programming
the pinmux appropriately.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Add enum to select from available funcmux configs
Simon Glass [Wed, 11 Jan 2012 12:42:23 +0000 (12:42 +0000)]
tegra: Add enum to select from available funcmux configs

We want to give a name to each available funcmux config. For now we just
use the pin group names (even through it is verbose) since there seems
to be nothing better.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra: Adjust funcmux config test to permit expansion
Simon Glass [Wed, 11 Jan 2012 12:42:22 +0000 (12:42 +0000)]
tegra: Adjust funcmux config test to permit expansion

We want to support config options other than zero, so move the test to the
end to allow intermediate code to OK such a config.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra2: Add support for Compal Paz00 (Toshiba AC100)
Stephen Warren [Fri, 6 Jan 2012 12:14:42 +0000 (12:14 +0000)]
tegra2: Add support for Compal Paz00 (Toshiba AC100)

The Toshiba AC100 (Compal code-name Paz00, aka Dynabook AZ) is a netbook
derived from the NVIDIA Tegra Harmony reference board. It ships with
Android, but is often repurposed to run Linux. This patch adds just enough
support to get a U-Boot serial console, and the ability access built-in
eMMC and the external SD slot.

v2:
* Rebased on latest HEAD, incorporated changes made to other board files.
* Moved board files from board/nvidia to board/compal.
* Switched to correct odmdata value. This required add the previous patch
  to fix U-Boot's interpretation of the odmdata RAM size field.
* Removed nvmem= from default Linux kernel command-line; no drivers use the
  reserved memory yet, so there's no point reserving it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra2: Fix default RAM size selection in odmdata
Stephen Warren [Fri, 6 Jan 2012 12:14:41 +0000 (12:14 +0000)]
tegra2: Fix default RAM size selection in odmdata

A value of 0 in the odmdata RAM size field means default, which is 512MB
not 1GB. Fix this. For reference, see:

http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=blob;\
f=arch/arm/mach-tegra/odm_kit/query/harmony/tegra_devkit_custopt.h;\
h=1ec7010911454f19a5018952fd245785a62c59ad;\
hb=0e52d7fe25b11a656c376a37890be219470661fb

v2: New patch

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agotegra2: Fix conflicting pinmux for UARTA
Stephen Warren [Fri, 6 Jan 2012 12:14:40 +0000 (12:14 +0000)]
tegra2: Fix conflicting pinmux for UARTA

Tegra appears to boot with function UARTA pre-selected on mux
group SDB. If two mux groups are both set to the same function,
it's unclear which group's pins drive the RX signals into the
HW module. For UARTA, SDB certainly overrides group IRTX in
practice. To solve this, configure some alternative function on
SDB to avoid the conflict. Also, tri-state the group to avoid
driving any signal onto it until we know what's connected.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years agofw_env.h: fix comment
Frans Meulenbroeks [Thu, 5 Jan 2012 08:09:10 +0000 (08:09 +0000)]
fw_env.h: fix comment

made description according to implementation
(where the config file is the default).

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 11 Feb 2012 21:16:50 +0000 (22:16 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  add STM29F400BB to table of supported legacy flashs
  * Fix: watchdog timed out, if flash blank (0xFF) blocks

12 years agoMerge branch 'master' of git://git.denx.de/u-boot-cfi-flash
Wolfgang Denk [Sat, 11 Feb 2012 21:16:47 +0000 (22:16 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash

* 'master' of git://git.denx.de/u-boot-cfi-flash:
  add STM29F400BB to table of supported legacy flashs
  * Fix: watchdog timed out, if flash blank (0xFF) blocks

12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 11 Feb 2012 21:14:56 +0000 (22:14 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  nand/fsl_elbc: Convert to self-init
  nand: Introduce CONFIG_SYS_NAND_SELF_INIT
  nand_spl: store ecc data on the stack
  mtd/nand: Add ONFI support for FSL NAND controller
  nand: make 1-bit software ECC configurable
  nand: Sanitize ONFI strings.
  nand: Merge changes to BBT from Linux nand driver
  nand: Merge changes from Linux nand driver
  nand: cleanup whitespace
  nand: Add more NAND types from Linux nand driver
  nand: Merge BCH code from Linux nand driver
  NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS
  NAND: remove NAND_MAX_CHIPS definitions
  nand_spl_simple: store ecc data on the stack

12 years agoMerge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Sat, 11 Feb 2012 21:07:48 +0000 (22:07 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

* 'master' of git://git.denx.de/u-boot-nand-flash:
  nand/fsl_elbc: Convert to self-init
  nand: Introduce CONFIG_SYS_NAND_SELF_INIT
  nand_spl: store ecc data on the stack
  mtd/nand: Add ONFI support for FSL NAND controller
  nand: make 1-bit software ECC configurable
  nand: Sanitize ONFI strings.
  nand: Merge changes to BBT from Linux nand driver
  nand: Merge changes from Linux nand driver
  nand: cleanup whitespace
  nand: Add more NAND types from Linux nand driver
  nand: Merge BCH code from Linux nand driver
  NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS
  NAND: remove NAND_MAX_CHIPS definitions
  nand_spl_simple: store ecc data on the stack

12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 11 Feb 2012 21:05:13 +0000 (22:05 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  ARM: AM33XX: Add i2c support
  ARM: AM33XX: Add AM33XX I2C driver support
  ARM: I2C: I2C Multi byte address support

12 years agoadd STM29F400BB to table of supported legacy flashs
David Müller (ELSOFT AG) [Mon, 6 Feb 2012 08:42:54 +0000 (09:42 +0100)]
add STM29F400BB to table of supported legacy flashs

Signed-off-by: David Mueller <d.mueller@elsoft.ch>
Signed-off-by: Stefan Roese <sr@denx.de>
12 years ago* Fix: watchdog timed out, if flash blank (0xFF) blocks
Jens Scharsig (BuS Elektronik) [Fri, 27 Jan 2012 08:29:53 +0000 (09:29 +0100)]
* Fix: watchdog timed out, if flash blank (0xFF) blocks

The current implementation of cfi_flash uses udelay to reset watchdog.
If several blocks are blank (0xff filled) the watchdog timed out.
The reason is, udelay is never called, if flash device is ready to fast.

e.g.
     mw.w $(copy_addr) FFFF 10000;cp.b $(copy_addr) 10880000 20000

     -> watchdog timed out

     mw.w $(copy_addr) 0000 10000;cp.b $(copy_addr) 10880000 20000

     -> watchdog not timed out

This patch adds an extra watchdog reset in front of flash ready check.

Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Signed-off-by: Stefan Roese <sr@denx.de>
12 years agonand/fsl_elbc: Convert to self-init
Scott Wood [Fri, 13 Jan 2012 01:42:58 +0000 (19:42 -0600)]
nand/fsl_elbc: Convert to self-init

This driver doesn't yet make use of the added flexibility (not that that
should stop anyone from converting...), but it will with the in-progress
hack to support 4k-page NAND.

Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Introduce CONFIG_SYS_NAND_SELF_INIT
Scott Wood [Fri, 13 Jan 2012 01:07:23 +0000 (19:07 -0600)]
nand: Introduce CONFIG_SYS_NAND_SELF_INIT

This allows a driver to run code between nand_scan_ident() and
nand_scan_tail(), among other things.  See the additions to
doc/README.nand for details.

To allow a gradual transition, Boards that don't set
CONFIG_SYS_NAND_SELF_INIT will still be initialized the old way, but
new drivers should not require this, and existing drivers should be
converted when convenient.

Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand_spl: store ecc data on the stack
Scott Wood [Wed, 11 Jan 2012 21:41:01 +0000 (15:41 -0600)]
nand_spl: store ecc data on the stack

Adapt the following patch from spl to nand_spl:

  Author: Stefano Babic <sbabic@denx.de>
  Date:   Thu Dec 15 10:55:37 2011 +0100

      nand_spl_simple: store ecc data on the stack

      Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
      which is likely to contain already loaded data.
      The patch saves the oob data and the ecc on the stack replacing
      the fixed address in RAM.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Simon Schwarz <simonschwarzcor@googlemail.com>
CC: Wolfgang Denk <wd@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
While nand_spl is on its way out, in favor of spl, there are still
many boards using it, and conversions are gradual.  This allows us
to get rid of CONFIG_SYS_NAND_ECCSTEPS and CONFIG_SYS_NAND_ECCTOTAL now,
which would otherwise be likely to linger unreferenced after a conversion.

It also eliminates a temporary error in the hawkboard_nand build, since
the spl version of the patch removed ECCSTEPS/TOTAL from hawkboard.h, but
the spl conversion is pending (and may be merged via a different tree).

Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomtd/nand: Add ONFI support for FSL NAND controller
Shengzhou Liu [Mon, 12 Dec 2011 09:49:57 +0000 (17:49 +0800)]
mtd/nand: Add ONFI support for FSL NAND controller

- fix NAND_CMD_READID command for ONFI detect.
- add NAND_CMD_PARAM command to read the ONFI parameter page.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: make 1-bit software ECC configurable
Christian Hitz [Wed, 12 Oct 2011 07:32:06 +0000 (09:32 +0200)]
nand: make 1-bit software ECC configurable

The software ECC algorithm is not necessary when hardware ECC
is available and can be left out for a smaller image size.
Enable with CONFIG_MTD_ECC_SOFT.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Sanitize ONFI strings.
Christian Hitz [Wed, 12 Oct 2011 07:32:05 +0000 (09:32 +0200)]
nand: Sanitize ONFI strings.

[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This is part of the synchronization with the nand driver to the
Linux 3.0 state.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Merge changes to BBT from Linux nand driver
Christian Hitz [Wed, 12 Oct 2011 07:32:04 +0000 (09:32 +0200)]
nand: Merge changes to BBT from Linux nand driver

[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch synchronizes the nand driver with the Linux 3.0 state.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Merge changes from Linux nand driver
Christian Hitz [Wed, 12 Oct 2011 07:32:02 +0000 (09:32 +0200)]
nand: Merge changes from Linux nand driver

[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch synchronizes the nand driver with the Linux 3.0 state.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
[scottwood@freescale.com: minor fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: cleanup whitespace
Christian Hitz [Wed, 12 Oct 2011 07:32:01 +0000 (09:32 +0200)]
nand: cleanup whitespace

Bring up to date with corresponding file from linux.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Add more NAND types from Linux nand driver
Christian Hitz [Wed, 12 Oct 2011 07:32:00 +0000 (09:32 +0200)]
nand: Add more NAND types from Linux nand driver

[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch merges the additional NAND flash types from the 3.0 Linux
kernel.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Merge BCH code from Linux nand driver
Christian Hitz [Wed, 12 Oct 2011 07:31:59 +0000 (09:31 +0200)]
nand: Merge BCH code from Linux nand driver

[backport from linux commit 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe]

This patch merges the BCH ECC algorithm from the 3.0 Linux kernel.
This enables U-Boot to support modern NAND flash chips that
require more than 1-bit of ECC in software.

Signed-off-by: Christian Hitz <christian.hitz@aizo.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agoNAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS
Scott Wood [Thu, 5 Jan 2012 23:24:13 +0000 (17:24 -0600)]
NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS

NAND_MAX_CHIPS has been replaced by CONFIG_SYS_NAND_MAX_CHIPS,
and the latter defaults to 1.

Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agoNAND: remove NAND_MAX_CHIPS definitions
Vladimir Zapolskiy [Sun, 20 Nov 2011 14:10:16 +0000 (16:10 +0200)]
NAND: remove NAND_MAX_CHIPS definitions

This change follows the change by Wolfgang Grandegger (commit 6c869637fef),
which allows to remove useless NAND_MAX_CHIPS definitions in board config
files.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand_spl_simple: store ecc data on the stack
Stefano Babic [Thu, 15 Dec 2011 09:55:37 +0000 (10:55 +0100)]
nand_spl_simple: store ecc data on the stack

Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
which is likely to contain already loaded data.
The patch saves the oob data and the ecc on the stack replacing
the fixed address in RAM.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Simon Schwarz <simonschwarzcor@googlemail.com>
CC: Wolfgang Denk <wd@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agoARM: AM33XX: Add i2c support
Patil, Rachna [Sun, 22 Jan 2012 23:47:01 +0000 (23:47 +0000)]
ARM: AM33XX: Add i2c support

Add i2c driver board hookup for AM335X EVM

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Patil, Rachna <rachna@ti.com>
12 years agoARM: AM33XX: Add AM33XX I2C driver support
Patil, Rachna [Sun, 22 Jan 2012 23:46:23 +0000 (23:46 +0000)]
ARM: AM33XX: Add AM33XX I2C driver support

1. Compliant with Philips I2C specification version 2.1
2. Supports upto 100Kbps in standard mode

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Patil, Rachna <rachna@ti.com>
12 years agoARM: I2C: I2C Multi byte address support
Patil, Rachna [Sun, 22 Jan 2012 23:44:12 +0000 (23:44 +0000)]
ARM: I2C: I2C Multi byte address support

Existing OMAP I2C driver does not support address
length greater than one. Hence this patch is to
add support for 2 byte address read/write.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Patil, Rachna <rachna@ti.com>
12 years agoREADME: update (C) entry
Wolfgang Denk [Thu, 19 Jan 2012 09:58:21 +0000 (10:58 +0100)]
README:  update (C) entry

There are tools that automatically extract this information, so better
make it up to date.

Signed-off-by: Wolfgang Denk <wd@denx.de>
12 years agoovero: add SPL support
Andreas Müller [Wed, 4 Jan 2012 15:26:25 +0000 (15:26 +0000)]
overo: add SPL support

* implementation based on ti beagleboard/omap3evm
* timing data and i2c workaround for revision 0 boards taken from x-loader
* run-tested with overo revision 0 and 1 / boot from NAND and SDcard
* run-tested with x-loader

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
Signed-off-by: Tom Rini <trini@ti.com>
12 years agoomap_rev_string: output to stdout
Andreas Müller [Wed, 4 Jan 2012 15:26:24 +0000 (15:26 +0000)]
omap_rev_string: output to stdout

* avoid potential buffer overflows
* allow SPL-build not to output "Texas Instruments Revision detection unimplemented"

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
Signed-off-by: Tom Rini <trini@ti.com>
12 years agoOMAP SPL: call timer_init in s_init to make udelay work earlier
Andreas Müller [Wed, 4 Jan 2012 15:26:23 +0000 (15:26 +0000)]
OMAP SPL: call timer_init in s_init to make udelay work earlier

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
12 years agodrivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
Andreas Müller [Wed, 4 Jan 2012 15:26:22 +0000 (15:26 +0000)]
drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM

At old overo boards TWL4030 RTC irq is connected to gpio112. Unfortunately
this pin is also used for revision detection. Therefore we need to send
shut-up to TWL4030 to avoid reading wrong revision. In SPL this must
be done before SDRAM is set up because the type of SDRAM is revision dependent.
By this patch it is ensured that all variables used by omap24xx_i2c.c are
located in SRAM.

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
12 years agoinclude/configs/omap3_overo.h: several cleanups
Andreas Müller [Wed, 4 Jan 2012 15:26:21 +0000 (15:26 +0000)]
include/configs/omap3_overo.h: several cleanups

* remove unused macros
* remove unused macro values
* align tabs
* remove Free Software Foundation address

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
12 years agoboard/overo/overo.c: replace printf with one argument by puts
Andreas Müller [Wed, 4 Jan 2012 15:26:20 +0000 (15:26 +0000)]
board/overo/overo.c: replace printf with one argument by puts

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
12 years agodrivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
Andreas Müller [Wed, 4 Jan 2012 15:26:19 +0000 (15:26 +0000)]
drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts

Signed-off-by: Andreas Müller <schnitzeltony@gmx.de>
Acked-by: Heiko Schocher <hs@denx.de>
12 years agoARM:AM33XX: Add SPL support for AM335X EVM
Chandan Nath [Mon, 9 Jan 2012 20:38:59 +0000 (20:38 +0000)]
ARM:AM33XX: Add SPL support for AM335X EVM

This patch is added to support SPL feature on AM335X
platform. In this patch, MMC1 is configured as boot
device for SPL and support for other devices will be
added in the next patch series.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agoARM:AM33XX: Add mmc/sd support
Chandan Nath [Mon, 9 Jan 2012 20:38:58 +0000 (20:38 +0000)]
ARM:AM33XX: Add mmc/sd support

This patch add supports for mmc/sd driver on AM335X platform.
PLL and pinmux configurations for mmc/sd are configured in this
patch.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
12 years agoARM:AM33XX: Fixing AM335X config parameters
Chandan Nath [Mon, 9 Jan 2012 20:38:57 +0000 (20:38 +0000)]
ARM:AM33XX: Fixing AM335X config parameters

This patch is added to correct some of the AM335X config
parameters which were incorrect along with some cleanup
like removing unused code.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
12 years agoARM:AM33XX: Fix ddr and timer register offset
Chandan Nath [Mon, 9 Jan 2012 20:38:56 +0000 (20:38 +0000)]
ARM:AM33XX: Fix ddr and timer register offset

This patch is added to update incorrect ddr and timer
register offset.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
12 years agoARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX
Chandan Nath [Mon, 9 Jan 2012 20:38:55 +0000 (20:38 +0000)]
ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX

This patch is added to replace CONFIG_AM335X symbol
with CONFIG_AM333XX for AM33XX platforms.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Tested-by: Thomas Weber <weber@corscience.de>
12 years agocm-t35: use the new EEPROM module to read the MAC address
Nikita Kiryanov [Thu, 12 Jan 2012 03:28:09 +0000 (03:28 +0000)]
cm-t35: use the new EEPROM module to read the MAC address

Switch to the new EEPROM module and fix the problem of MAC address
being read from the wrong offset due to lack of distinction between
EEPROM layouts.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agocm-t35: pass correct revision information to Linux
Nikita Kiryanov [Mon, 2 Jan 2012 04:01:34 +0000 (04:01 +0000)]
cm-t35: pass correct revision information to Linux

Read revision from EEPROM and pass it to Linux.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agoomap3: make get_board_rev() function weak
Nikita Kiryanov [Thu, 5 Jan 2012 02:03:22 +0000 (02:03 +0000)]
omap3: make get_board_rev() function weak

Current get_board_rev() function returns a hard coded value which is
obviously incorrect for the majority of boards.
Allow boards to provide a correct implementation by making this function
weak.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agocm-t35: add EEPROM module and pass Linux a serial number
Nikita Kiryanov [Thu, 12 Jan 2012 03:26:30 +0000 (03:26 +0000)]
cm-t35: add EEPROM module and pass Linux a serial number

Add board specific EEPROM handling module,
read the serial number from the EEPROM and pass it to Linux.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agocm-t35: various cleanups
Nikita Kiryanov [Mon, 2 Jan 2012 04:01:31 +0000 (04:01 +0000)]
cm-t35: various cleanups

Move #ifdef CONFIG_SMC911X out of board_eth_init() function,
simplify the board_mmc_init() function, and enclose handle_mac_address()
in the CONFIG_SMC911X.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agocm-t35: cleanup the config file
Nikita Kiryanov [Mon, 2 Jan 2012 04:01:30 +0000 (04:01 +0000)]
cm-t35: cleanup the config file

Remove values from boolean defines, fix indentation, etc..
No functional changes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agoomap4: fix boot issue on ES2.0 Panda
Aneesh V [Thu, 29 Dec 2011 08:47:17 +0000 (08:47 +0000)]
omap4: fix boot issue on ES2.0 Panda

Fix boot issue on ES2.0 Panda by tuning some
IO settings. The CONTROL_EFUSE_2 register has
to be over-ridden in software for 4430 boards.

Commit 23e9f0723e48615332119de4f4ec7a833a282628
wrongly did this for CONTROL_EFUSE_1. Reverting
this and doing it for CONTROL_EFUSE_2.

Signed-off-by: Aneesh V <aneesh@ti.com>
Tested-by: Raúl Porcel <armin76@gentoo.org>
12 years agobeagle: add eeprom expansion board info for bct brettl3
Peter Meerwald [Tue, 3 Jan 2012 04:14:35 +0000 (04:14 +0000)]
beagle: add eeprom expansion board info for bct brettl3

this is for a prototyping board

vendor/product ids have been added to
http://elinux.org/BeagleBoardPinMux#List_of_Vendor_and_Device_IDs

12 years agoARMV7: Add support For Logic OMAP35x/DM37x modules
Peter Barada [Mon, 19 Dec 2011 19:54:51 +0000 (19:54 +0000)]
ARMV7: Add support For Logic OMAP35x/DM37x modules

This patch adds basic support for OMAP35x/DM37x SOM LV/Torpedo
reference boards. It assumes U-boot is loaded to SDRAM with the
help of another small bootloader (x-load) running from SRAM.

Signed-off-by: Peter Barada <peter.barada@logicpd.com>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agoarm, davinci: Change byte order of RTC kick register values
Christian Riesch [Wed, 21 Dec 2011 04:49:18 +0000 (04:49 +0000)]
arm, davinci: Change byte order of RTC kick register values

Now the values in the defines agree with those in the manuals.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Tom Rini <trini@ti.com>
Cc: Heiko Schocher <hs@denx.de>
12 years agoOMAP3: Remove unused define CONFIG_OMAP3_*_DDR
Thomas Weber [Thu, 15 Dec 2011 23:00:19 +0000 (23:00 +0000)]
OMAP3: Remove unused define CONFIG_OMAP3_*_DDR

This patch removes the unused definitions:
CONFIG_OMAP3_MICRON_DDR
CONFIG_OMAP3_NUMONYX_DDR
CONFIG_OMAP3_INFINEON_DDR

Signed-off-by: Thomas Weber <weber@corscience.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Luca Ceresoli <luca.ceresoli@comelit.it>
12 years agoda850evm: Remove CONFIG_SYS_xxCACHE_OFF defines
Christian Riesch [Thu, 15 Dec 2011 00:33:21 +0000 (00:33 +0000)]
da850evm: Remove CONFIG_SYS_xxCACHE_OFF defines

This patch removes the defines CONFIG_SYS_ICACHE_OFF,
CONFIG_SYS_DCACHE_OFF, and CONFIG_SYS_L2CACHE_OFF from the board
configuration. These defines are useless since cache is
anyway disabled for the entire architecture since commit
cba4b1809f043bf85c806e5a4e342f62bd5ded45.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Tom Rini <trini@ti.com>
12 years agoarm, davinci: Use a common configuration file for da850evm and da850_am18xxevm
Christian Riesch [Thu, 15 Dec 2011 06:21:55 +0000 (06:21 +0000)]
arm, davinci: Use a common configuration file for da850evm and da850_am18xxevm

In commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783 a separate header
file was introduced for the AM1808 EVM, include/configs/da850_am18xxevm.h.
Before this commit, the da850evm.h configuration file was used for both
the AM1808 and the OMAP-L138 EVMs. The only substantial difference
between the da850evm and the da850_am18xxevm configuration is a single
bit in the hardware revision that is passed to the Linux kernel.

This patch removes include/configs/da850_am18xxevm.h. Instead the
include/configs/da850evm.h configuration is used for AM18xx EVMs and
CONFIG_DA850_AM18X_EVM is defined in boards.cfg.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Tom Rini <trini@ti.com>
12 years agoi.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Jason Liu [Thu, 29 Dec 2011 06:34:19 +0000 (06:34 +0000)]
i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board

Add the initial support for Freescale i.MX6Q Sabre Lite board

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Jason Liu <jason.hui@linaro.org>
CC: Eric Nelson <eric.nelson@boundarydevices.com>
12 years agoimx: mx6q: add aipstz init for off platform periph
Jason Liu [Tue, 10 Jan 2012 00:52:59 +0000 (00:52 +0000)]
imx: mx6q: add aipstz init for off platform periph

Init peripheral access control register of AIPSTZ OPACRx:

Buffer Writes(BW):      0 -> not bufferable,
Supervisor Protect(SP): 0 -> not require supervisor privilege level for accesses.
Write Protect(WP):      0 -> allows write accesses.
Trusted Protect(TP):    0 -> allows unstrusted master

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
12 years agomx28: fix clearing of IRQs in power init
Zach Sadecki [Mon, 9 Jan 2012 10:22:54 +0000 (10:22 +0000)]
mx28: fix clearing of IRQs in power init

There are 2 locations in the power init code for the mx28 where IRQs are not being cleared because incorrect methods to clear those bits were being used.  This was causing my board to get stuck waiting for POWER_CTRL_VDD5V_DROOP_IRQ to clear.  Using the correct method to clear the IRQs fixes it.

Signed-off-by: Zach Sadecki <zach@itwatchdogs.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
12 years agoM28EVK: Fix build if CONFIG_CMD_NAND not selected
Marek Vasut [Sat, 31 Dec 2011 18:28:22 +0000 (18:28 +0000)]
M28EVK: Fix build if CONFIG_CMD_NAND not selected

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
12 years agom28evk: Remove 'all' target from Makefile
Fabio Estevam [Thu, 29 Dec 2011 03:34:13 +0000 (03:34 +0000)]
m28evk: Remove 'all' target from Makefile

Remove 'all' target from Makefile, as this is unused code.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
12 years agom28evk: Use GENERATED_GBL_DATA_SIZE
Fabio Estevam [Thu, 29 Dec 2011 03:35:38 +0000 (03:35 +0000)]
m28evk: Use GENERATED_GBL_DATA_SIZE

Use GENERATED_GBL_DATA_SIZE for calculating CONFIG_SYS_INIT_SP_OFFSET.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
12 years agomx28evk: Remove 'all' target from Makefile
Fabio Estevam [Thu, 29 Dec 2011 03:34:12 +0000 (03:34 +0000)]
mx28evk: Remove 'all' target from Makefile

Remove 'all' target from Makefile, as this is unused code.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
12 years agoMX28: Fix MXSBOOT segfault if no params specified
Marek Vasut [Thu, 22 Dec 2011 09:55:08 +0000 (09:55 +0000)]
MX28: Fix MXSBOOT segfault if no params specified

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
12 years agoi.mx6:imx6q: allign MAC address with burned-in ordering
Jason Liu [Mon, 19 Dec 2011 02:38:13 +0000 (02:38 +0000)]
i.mx6:imx6q: allign MAC address with burned-in ordering

For the i.mx6q, the burned-in MAC address will be the following odering,

fuse: 0x620[7:0]   MAC_ADDR[7:0]     ---> mac[5]
fuse: 0x620[15:8]  MAC_ADDR[15:8]    ---> mac[4]
fuse: 0x620[23:16] MAC_ADDR[23:16]   ---> mac[3]
fuse: 0x620[31:24] MAC_ADDR[31:24]   ---> mac[2]
fuse: 0x630[7:0]   MAC_ADDR[39:32]   ---> mac[1]
fuse: 0x630[15:8]  MAC_ADDR[47:40]   ---> mac[0]

This patch also fix the error caculation for the fuse bank[0] address

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
12 years agomx28evk: Add initial support for MX28EVK board
Fabio Estevam [Tue, 20 Dec 2011 05:46:34 +0000 (05:46 +0000)]
mx28evk: Add initial support for MX28EVK board

Add initial support for Freescale MX28EVK board.

Tested boot via SD card and by loading a kernel via TFTP through
the FEC interface.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agomx28: Let dram_init be common for mx28
Fabio Estevam [Tue, 20 Dec 2011 05:46:33 +0000 (05:46 +0000)]
mx28: Let dram_init be common for mx28

Let dram_init function be a common function, so that other mx28 boards
can reuse it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
12 years agomx28: Let imx_get_mac_from_fuse be common for mx28
Fabio Estevam [Tue, 20 Dec 2011 06:42:29 +0000 (06:42 +0000)]
mx28: Let imx_get_mac_from_fuse be common for mx28

Let imx_get_mac_from_fuse function be a common function, so that other
mx28 boards can reuse it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agonet: imx: Add multi-FEC support for imx_get_mac_from_fuse
Fabio Estevam [Tue, 20 Dec 2011 05:46:31 +0000 (05:46 +0000)]
net: imx: Add multi-FEC support for imx_get_mac_from_fuse

Add multi-FEC support for imx_get_mac_from_fuse by passing dev_id as a parameter.

This feature is important on mx28 SoC for example that has two FEC ports.

Cc: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agoi.mx6q: mx6qarm2: Enable the usboh3 clock
Eric Nelson [Sun, 25 Dec 2011 21:00:47 +0000 (21:00 +0000)]
i.mx6q: mx6qarm2: Enable the usboh3 clock

Bits 0 and 1 of CCM_CCGR7 are the usboh3 clock enable bits. Enabling this
clock is necessary for the USB download.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
CC: Jason Hui <jason.hui@linaro.org>
Acked-by: Jason Hui <jason.hui@linaro.org>
12 years agomx28: remove omap specific config options
Veli-Pekka Peltola [Tue, 20 Dec 2011 02:00:11 +0000 (02:00 +0000)]
mx28: remove omap specific config options

Config options for OMAP are not used with i.MX28 so remove dead code.

Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agoi.mx6q: arm2: Add the enet function support
Jason Liu [Fri, 16 Dec 2011 05:17:08 +0000 (05:17 +0000)]
i.mx6q: arm2: Add the enet function support

This enable the network function on the i.mx6q armadillo2
board(arm2), thus we can use tftp to load image from network.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
12 years agofec: add the i.mx6q enet driver support
Jason Liu [Fri, 16 Dec 2011 05:17:07 +0000 (05:17 +0000)]
fec: add the i.mx6q enet driver support

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agoi.mx: i.mx6q: Add the enet clock function
Jason Liu [Fri, 16 Dec 2011 05:17:06 +0000 (05:17 +0000)]
i.mx: i.mx6q: Add the enet clock function

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Acked-by: Stefano Babic <sbabic@denx.de>
12 years agoopenrisc: Add MAINTAINERS entry
Stefan Kristiansson [Fri, 18 Nov 2011 19:21:38 +0000 (19:21 +0000)]
openrisc: Add MAINTAINERS entry

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add architecture to MAKEALL
Stefan Kristiansson [Fri, 18 Nov 2011 19:21:37 +0000 (19:21 +0000)]
openrisc: Add architecture to MAKEALL

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add openrisc-generic example board
Stefan Kristiansson [Sat, 26 Nov 2011 19:04:55 +0000 (19:04 +0000)]
openrisc: Add openrisc-generic example board

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add support for standalone programs
Stefan Kristiansson [Fri, 18 Nov 2011 19:21:35 +0000 (19:21 +0000)]
openrisc: Add support for standalone programs

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add board info printout to cmd_bdinfo
Stefan Kristiansson [Fri, 18 Nov 2011 19:21:34 +0000 (19:21 +0000)]
openrisc: Add board info printout to cmd_bdinfo

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add library functions
Stefan Kristiansson [Sat, 26 Nov 2011 19:04:52 +0000 (19:04 +0000)]
openrisc: Add library functions

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add cpu files
Stefan Kristiansson [Sat, 26 Nov 2011 19:04:51 +0000 (19:04 +0000)]
openrisc: Add cpu files

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add architecture image support
Stefan Kristiansson [Sat, 26 Nov 2011 19:04:50 +0000 (19:04 +0000)]
openrisc: Add architecture image support

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoopenrisc: Add architecture header files
Stefan Kristiansson [Sat, 26 Nov 2011 19:04:49 +0000 (19:04 +0000)]
openrisc: Add architecture header files

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
12 years agoStrip mkenvimage
David Wagner [Wed, 23 Nov 2011 10:28:10 +0000 (10:28 +0000)]
Strip mkenvimage

Signed-off-by: David Wagner <david.wagner@free-electrons.com>
12 years agopost/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU
Kumar Gala [Thu, 12 Jan 2012 09:30:41 +0000 (09:30 +0000)]
post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 13 Jan 2012 19:39:33 +0000 (20:39 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  fsl_lbc: add printout of LCRR and LBCR to local bus regs
  sbc8548: Fix up local bus init to be frequency aware
  sbc8548: enable support for hardware SPD errata workaround
  sbc8548: relocate fixed ddr init code to ddr.c file
  sbc8548: Make enabling SPD RAM configuration work
  sbc8548: Fix LBC SDRAM initialization settings
  sbc8548: enable ability to boot from alternate flash
  sbc8548: relocate 64MB user flash to sane boundary
  Revert "SBC8548: fix address mask to allow 64M flash"
  MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC
  eXMeritus HWW-1U-1A: Add support for the AT24C128N I2C EEPROM
  eXMeritus HWW-1U-1A: Minor environment variable tweaks

12 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Fri, 13 Jan 2012 19:38:49 +0000 (20:38 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  fsl_lbc: add printout of LCRR and LBCR to local bus regs
  sbc8548: Fix up local bus init to be frequency aware
  sbc8548: enable support for hardware SPD errata workaround
  sbc8548: relocate fixed ddr init code to ddr.c file
  sbc8548: Make enabling SPD RAM configuration work
  sbc8548: Fix LBC SDRAM initialization settings
  sbc8548: enable ability to boot from alternate flash
  sbc8548: relocate 64MB user flash to sane boundary
  Revert "SBC8548: fix address mask to allow 64M flash"
  MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC
  eXMeritus HWW-1U-1A: Add support for the AT24C128N I2C EEPROM
  eXMeritus HWW-1U-1A: Minor environment variable tweaks

12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 13 Jan 2012 19:13:26 +0000 (20:13 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  fix: error ATMEL_FIO_BASE undeclared, if use I2C_Soft on AT91

12 years agoMerge branch 'master' of git://git.denx.de/u-boot-i2c
Wolfgang Denk [Fri, 13 Jan 2012 19:13:20 +0000 (20:13 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c

* 'master' of git://git.denx.de/u-boot-i2c:
  fix: error ATMEL_FIO_BASE undeclared, if use I2C_Soft on AT91

12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 13 Jan 2012 19:11:25 +0000 (20:11 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  board/mpl/pati: use the CFI driver for the PATI board
  board/mpl/mip405: use the CFI driver for the MIP405/MIP405T board
  board/mpl/pip405: use the CFI driver for the PIP405 board
  board/mpl/common: remove the old legacy flash
  ppc4xx: Setup HICB on Io64

12 years agoMerge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Fri, 13 Jan 2012 19:11:22 +0000 (20:11 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

* 'master' of git://git.denx.de/u-boot-ppc4xx:
  board/mpl/pati: use the CFI driver for the PATI board
  board/mpl/mip405: use the CFI driver for the MIP405/MIP405T board
  board/mpl/pip405: use the CFI driver for the PIP405 board
  board/mpl/common: remove the old legacy flash
  ppc4xx: Setup HICB on Io64

12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 13 Jan 2012 19:10:56 +0000 (20:10 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  mpc8313erdb: fix mtdparts address
  powerpc/83xx/km: add support for 8321 based tuge1 board
  powerpc/83xx/km: merge tuxa and tuda1 boards to tuxx1
  powerpc/83xx/km: remove obsolete defines for tuda1
  powerpc/83xx/km: update SDRAM parameters for km8321 boards
  mpc8313erdb: Enable GPIO support on the MPC8313E RDB
  mpc83xx: Add a GPIO driver for the MPC83XX family
  gpio: Replace ARM gpio.h with the common API in include/asm-generic
  gpio: Modify common gpio.h to more closely match Linux

12 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Wolfgang Denk [Fri, 13 Jan 2012 19:07:40 +0000 (20:07 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

* 'master' of git://git.denx.de/u-boot-mpc83xx:
  mpc8313erdb: fix mtdparts address
  powerpc/83xx/km: add support for 8321 based tuge1 board
  powerpc/83xx/km: merge tuxa and tuda1 boards to tuxx1
  powerpc/83xx/km: remove obsolete defines for tuda1
  powerpc/83xx/km: update SDRAM parameters for km8321 boards
  mpc8313erdb: Enable GPIO support on the MPC8313E RDB
  mpc83xx: Add a GPIO driver for the MPC83XX family
  gpio: Replace ARM gpio.h with the common API in include/asm-generic
  gpio: Modify common gpio.h to more closely match Linux

12 years agoMerge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Fri, 13 Jan 2012 19:05:47 +0000 (20:05 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
  fsl_esdhc: fix PIO mode transfers
  mmc: tegra2: Implement card-detect hook.
  mmc: fsl_esdhc: Implement card-detect hook.
  mmc: Implement card detection.
  mmc: Change board_mmc_getcd() function prototype.
  drivers/mmc/mv_sdhci.c: Fix build warning
  ftsdc010: improve performance and capability
  mmc: add host_caps checking avoid switch card improperly
  i.mx: fsl_esdhc: add the i.mx6q support

12 years agofsl_lbc: add printout of LCRR and LBCR to local bus regs
Paul Gortmaker [Thu, 15 Dec 2011 15:22:07 +0000 (10:22 -0500)]
fsl_lbc: add printout of LCRR and LBCR to local bus regs

It can be handy to have these in the output when trying to
debug odd behaviour.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12 years agosbc8548: Fix up local bus init to be frequency aware
Paul Gortmaker [Sat, 31 Dec 2011 04:53:13 +0000 (23:53 -0500)]
sbc8548: Fix up local bus init to be frequency aware

The code here was copied from the mpc8548cds support, and it
wasn't using the CONFIG_SYS_LBC_LCRR define, and was just
unconditionally setting the LCRR_EADC bit.  Snooping with a
hardware debugger also showed we had LCRR_DBYP set, since we were
setting it based on a read of an uninitialized lcrr read via
clkdiv.  Borrow from the code in the tqm85xx.c support to add
LBC frequency aware masking of these bits.

This change will correct reliability issues associated with trying
to use the 128MB of LBC 100MHz SDRAM on this board.  Thanks to
Keith Savage for assistance in diagnosing the root cause of this.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12 years agosbc8548: enable support for hardware SPD errata workaround
Paul Gortmaker [Sat, 31 Dec 2011 04:53:12 +0000 (23:53 -0500)]
sbc8548: enable support for hardware SPD errata workaround

Existing boards by default have an issue where the LBC SDRAM
SPD EEPROM and the DDR2 SDRAM SPD EEPROM both land at 0x51.

After the hardware modification listed in the README is made,
then the DDR2 SPD EEPROM appears at 0x53.  So this implements
a board specific get_spd() by taking advantage of the existing
weak linkage, that 1st tries reading at 0x53 and then if that
fails, it falls back to the old 0x51.

Since the old dependency issue of "SPD implies no LBC SDRAM"
gets removed with the hardware errata fix, remove that restriction
in the code, so both LBC SDRAM and SPD can be selected.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>