Nian Jing [Wed, 3 Jan 2018 13:06:19 +0000 (21:06 +0800)]
cvbs: cvbs bring up for g12a
PD#156734: cvbs bring up for g12a
Change-Id: I8a69d85a921e78300db9ec96c2f93807f6f139b4
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Zan Peng [Fri, 2 Feb 2018 04:42:02 +0000 (12:42 +0800)]
pcie: add pcie driver support for G12A
PD#156734: pcie: add pcie driver support for G12A
Change-Id: I497e17ac212448934416c8af73206cd88766e406
Signed-off-by: Zan Peng <zan.peng@amlogic.com>
Xing Wang [Thu, 1 Feb 2018 01:21:26 +0000 (09:21 +0800)]
audio: auge: avout and notify spdifb to hdmitx
PD#156734: audio: auge: avout and notify spdifb to hdmitx
Change-Id: I63b9fe4d18979b33907a3ed848f99abf42ae8972
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Jiyu Yang [Thu, 22 Feb 2018 09:33:40 +0000 (17:33 +0800)]
osd: disable out fence and wait infence
PD#156734: osd: disable out fence and wait infence
Change-Id: Id0390f5c6667a64915d202362af87db761ef2783
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Brian Zhu [Thu, 1 Feb 2018 16:28:21 +0000 (00:28 +0800)]
video: disable vd1 post and pre as default
PD#156734
Change-Id: I43b372d55e4997999fe7c99ea9d0ab4f7b8a5e57
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yi Zhou [Thu, 22 Feb 2018 09:08:40 +0000 (17:08 +0800)]
hdmitx: update hdmitx mode parameters
PD#156734: hdmitx: update hdmitx mode parameters
1.update 6G signal
2.add hpd interrupt
3.add ddc channel
4.enable every mode output
Change-Id: I7d505f41b4f182324e6d8c560a17fb0b2bbb6b7a
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yu Tu [Fri, 2 Feb 2018 04:23:57 +0000 (12:23 +0800)]
remote in: add remote dtsi config for G12A
PD#156734: remote in: add remote dtsi config for G12A
Change-Id: Ia38c95bf8b16be9bafad396fc681405c98d6bc35
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
Weiguang.ruan [Thu, 1 Feb 2018 15:16:55 +0000 (23:16 +0800)]
wifi/bt: add wifi bt config [1/1]
PD#156734: wifi/bt: add wifi bt config
1. add wifi/bt configure
2. set pwm e for 32k clock
3. enable cts/rts of uart_a
Change-Id: I94800030a95119ed8ff0c60171faa2cca8eca287
Signed-off-by: Weiguang.ruan <Weiguang.ruan@amlogic.com>
Yonghui Yu [Thu, 1 Feb 2018 17:36:02 +0000 (01:36 +0800)]
sdcard: g12a: enbable hotplug
PD#156734: sdcard: g12a: enable hotplug on skt.
Change-Id: I04d42895bb526134ea6d9c2a5222e1acbae533a0
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
Xingyu Chen [Thu, 18 Jan 2018 08:25:35 +0000 (16:25 +0800)]
iio: saradc: add support for g12a
PD#156734: iio: saradc: add support for g12a
Add period sampling mode for g12a and next, here are a brief overview:
1. Enable period sampling mode
echo 1 > /sys/bus/iio/devices/iio:device0/buffer/enable
2. Set the sampling interval
The sampling interval can be set in dts by the two params:
<1> amlogic,delay-per-tick
<2> amlogic,ticks-per-period
If there are no define the params above, and the channel list is
sampled every 1ms by default.
3. Read sampling data from buffer
this currently provides no buffer events so it is up to userspace to
work out how often to read from the buffer. therefore, if you want to
read continuous sampling data from buffer, please use application.
Eg:
[kernel]/tools/iio/iio_generic_buffer.c
Change-Id: I27f904e2736768eacc9d73ff24078bd659e37049
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Yue Wang [Thu, 1 Feb 2018 15:21:39 +0000 (23:21 +0800)]
usb: add usb host & device driver support for g12a
PD#156734: usb: add usb host & device driver support for g12a
Change-Id: Ia12b63f85fb6d980a7c7906664ae2db7c4ddb86b
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Liang Yang [Thu, 1 Feb 2018 15:53:39 +0000 (23:53 +0800)]
nand: mtd nand initial version
PD#156734: nand: add nand support for G12A
Change-Id: Ic696edd8ca00ec3010e17b25a842788cb95fd166
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
qi duan [Thu, 1 Feb 2018 11:55:48 +0000 (19:55 +0800)]
UART: G12A: verify all uart port on skt dts.[1/1]
PD#156734: UART: G12A: verify all uart port on skt dts.
Change-Id: I2fb272d7803d0c21e16a10c3ccb535b4244e6e6b
Signed-off-by: qi duan <qi.duan@amlogic.com>
Qiufang Dai [Wed, 31 Jan 2018 09:53:16 +0000 (17:53 +0800)]
clock: G12A: fine-tune pcie/common pll parameters
PD#156734: clock: G12A: fine-tune pcie/common pll parameters
Change-Id: Ifbd8d07928deeebaa35c4f950efc290b1648394e
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yi Zhou [Thu, 1 Feb 2018 09:28:11 +0000 (17:28 +0800)]
hdmitx: update 1080p60hz parameters
PD#156734: hdmitx: update 1080p60hz parameters
Change-Id: Ic715b177c9320f97066187725a576780d656305d
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Brian Zhu [Thu, 1 Feb 2018 10:06:12 +0000 (18:06 +0800)]
video: enable vd1 scaler mem_pd for g12a
PD#156734
Change-Id: I8cfcf9fea8513eb5bd13cf292a7c378063247159
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
kele bai [Tue, 30 Jan 2018 08:04:44 +0000 (16:04 +0800)]
di: G12A skt dts add di support
PD#156734: di: G12A skt dts add di support
Change-Id: I95baa216f26af8e2e4da195ef8682cee04ef8660
Signed-off-by: kele bai <kele.bai@amlogic.com>
Xing Wang [Fri, 5 Jan 2018 10:02:51 +0000 (18:02 +0800)]
audio: auge: add sound driver for g12a
PD#156734: audio: auge: add sound driver for g12a
Change-Id: Ic2e9bf734ea33fbbf2911d0d9168934974f37b07
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
kele bai [Thu, 4 Jan 2018 11:20:30 +0000 (19:20 +0800)]
di: G12A add di support
PD#156734: G12A add di support
1) add new mtn&cont&mcinfo&mv&if0 mif
2) add nr downscale
3) post viu link case
4) add pps
Change-Id: Id9ce920323d4324f0e1429df787f8af2dad07318
Signed-off-by: kele bai <kele.bai@amlogic.com>
Evoke Zhang [Mon, 26 Feb 2018 07:05:15 +0000 (15:05 +0800)]
vpu: optimize get_vpu_clk with clktree api
PD#156734: vpu: optimize get_vpu_clk with clktree api
use clk_hw_get_rate instead of clk_get_rate.
Change-Id: Ib2d72c04d4df9acbacf06d189bbbce378f582716
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Brian Zhu [Wed, 31 Jan 2018 10:58:09 +0000 (18:58 +0800)]
osd: compatible with previous chip
PD#156734:
Change-Id: I4f0ea8121af271fb9e8fd60876fe6c59fe9faaaf
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Qiufang Dai [Mon, 29 Jan 2018 11:52:46 +0000 (19:52 +0800)]
dts: add g12a skt dts
PD#156734: dts: add g12a skt dts
Change-Id: I40ce169cabd1c53f7b7b8299bb3e11adbe29a35f
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yonghui Yu [Sun, 28 Jan 2018 13:52:19 +0000 (21:52 +0800)]
sdcard: enable sdcard for G12A
PD#156734: clock tree, pinmux tested.
Change-Id: I11088ea6d27c1788516c1b55c4ec81ade99ca112
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
Brian Zhu [Sat, 24 Feb 2018 05:02:45 +0000 (13:02 +0800)]
vpp: init viu1 path for g12a
PD#156734: G12A: vpp: init viu1 path for g12a
Change-Id: Ide96b364aa86638597e606c3b53401c84b7e201d
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
pengcheng chen [Thu, 14 Dec 2017 11:21:23 +0000 (19:21 +0800)]
osd: add osd support for g12a
PD#156734: osd: add osd support for g12a
Change-Id: I7192f0377da899846219af8d934a50f57fecbe29
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Qiufang Dai [Fri, 26 Jan 2018 11:05:54 +0000 (19:05 +0800)]
secmon: G12A: enable secmon driver in dts
PD#156734: secmon: enable secmon driver in dts
Change-Id: I32a3d5c3505de1c44c8be6b82a7e10ec1fc0a3de
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Fri, 26 Jan 2018 02:59:07 +0000 (10:59 +0800)]
clock: G12A: new add decode, t_sensor clock & vclk2 clk tree
PD#156734: clock: G12A: new add decode, t_sensor clock & vclk2 clk tree
Change-Id: I1a76bb870ecb5793ae7b560472fd2c2aa3f3651f
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Evoke Zhang [Sat, 24 Feb 2018 02:44:13 +0000 (10:44 +0800)]
vpu: update mem_pd control for g12a
PD#156734: vpu: update mem_pd control for g12a
also add vpu power on init function to avoid uboot coupling
Change-Id: Idcf435d7ec2c0e49f2b115102fba10ae9ee86b9d
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jian Hu [Tue, 9 Jan 2018 12:57:56 +0000 (20:57 +0800)]
arm64: dts: meson-g12a: add i2c DT info [2/2]
PD#156734: arm64: dts: meson-g12a: add i2c DT info
Change-Id: I9ff9a61319bbac54722e15c84fa3a19653c481ce
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Jiyu Yang [Mon, 25 Dec 2017 06:26:45 +0000 (14:26 +0800)]
dts: add dvalin config
PD#156734: add dvalin gpu config
Change-Id: Ib30694b302ae9e2839cb2f64e076934c041f9ff0
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
zhilei.wu [Sat, 24 Feb 2018 07:44:27 +0000 (15:44 +0800)]
ge2d: add ge2d support for g12a
PD#156734: ge2d: add ge2d support for g12a
support src2 blend
Change-Id: I5b8acd95d54d4c6160290a7d0254f8e96e20ce4b
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Bo Yang [Sun, 21 Jan 2018 09:52:18 +0000 (17:52 +0800)]
watchdog: add meson watchdog driver v3
PD#156734: watchdog: add meson watchdog driver v3
Change-Id: I5aac3393fd56b9961d669ca990dea0b7d42ee016
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Jian Hu [Mon, 8 Jan 2018 13:36:16 +0000 (21:36 +0800)]
arm64: dts: meson-g12a: add pwm DT info [2/2]
PD#156734: arm64: dts: meson-g12a: add pwm DT info
Change-Id: Iff1ed3709c66e97ac0334290d873b8a67544a6f2
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Brian Zhu [Tue, 16 Jan 2018 12:25:59 +0000 (20:25 +0800)]
media: add codec_io and canvas module for g12a
PD#156734: G12A: media: add codec_id and canvas module
Change-Id: Ib0e4ef05c237c313f483ebe2b029bf50f57d1c0a
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Jian Hu [Mon, 8 Jan 2018 13:02:08 +0000 (21:02 +0800)]
pwm: meson-g12a: add pwm support [1/2]
PD#156734: pwm: meson-g12a: add pwm support
Change-Id: I30b996a96e9c731379c10b4a09c4ff751d84140b
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Jian Hu [Tue, 9 Jan 2018 12:33:41 +0000 (20:33 +0800)]
i2c: meson-g12a: add i2c support [1/2]
PD#156734: i2c: meson-g12a: add i2c support
Change-Id: I10ac105b99f7a426e23fef501741a62d3b887985
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Qiufang Dai [Thu, 11 Jan 2018 08:41:15 +0000 (16:41 +0800)]
G12A: psci: enable psci in dts
PD#156734: G12A: psci: enable psci in dts
Change-Id: I448e6a85e2ecf0ed8870c9b883b598c51f5d7b74
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Mon, 8 Jan 2018 13:10:53 +0000 (21:10 +0800)]
clock: G12A: add sys_pll/hifi_pll/gp0_pll table
PD#156734: pll freq table which 3G < DCO < 6G
Change-Id: Ia1cadbd13af57d45a3a6d7b1bf65b8a055f4f91f
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yi Zhou [Sat, 24 Feb 2018 02:11:54 +0000 (10:11 +0800)]
hdmitx: hdmitx bringup for g12a
PD#156734: hdmitx: hdmitx bringup for g12a
Change-Id: Ie99915e69c90e3335183692611d8b92f7d3620ef
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Evoke Zhang [Tue, 2 Jan 2018 03:27:09 +0000 (11:27 +0800)]
vout_serve: add vout, vout2 support for g12a
PD#156734: vout_serve: add vout, vout2 support for g12a
Change-Id: I1cb45beca5325f9013901687d7d995bfb9a25766
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Fri, 29 Dec 2017 14:11:10 +0000 (22:11 +0800)]
vpu: add vpu support for g12a
PD#156734: vpu: add vpu support for g12a
Change-Id: I65f559e34408a6c2ecf2ff8b34a3fe1f9d1e440a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xingyu Chen [Sat, 24 Feb 2018 06:22:42 +0000 (14:22 +0800)]
pinctrl: add pinctrl&gpio support for g12a
PD#156734: pinctrl: add pinctrl&gpio support for g12a
the new pin feature (drive-strength) is first introduced in Meson
Series SoC [G12A]. we can refer the following example to use:
mux {
groups = "uart_ao_tx_a", "uart_ao_rx_a";
function = "uart_ao_a";
drive-strength = <1>;
}
the value of drive-strength can be set to 0/1/2/3, the larger
the value, the faster the slew rate.
Change-Id: I22c6967aa1d5de1b3f6acb84cb18a79b05c0403b
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Xingyu Chen [Tue, 2 Jan 2018 04:01:40 +0000 (12:01 +0800)]
irqchip: add gpio IRQ support for g12a
PD#156734: irqchip: add gpio IRQ support for g12a
Change-Id: I6eac421ca9ac9d908f3c52f0417da32fdde74c57
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Qiufang Dai [Tue, 2 Jan 2018 11:56:29 +0000 (19:56 +0800)]
clock: G12A media/gpu/fclk_div2p5 clk
PD#156734: G12A media/gpu/fclk_div2p5 clk
Change-Id: I804fdfff57f841a9628bc4a35cbc2ba63fe076c6
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Sat, 23 Dec 2017 09:32:27 +0000 (17:32 +0800)]
clock: clock tree for G12A
PD#156734: base clock tree for G12A,
include clk81, ee gate, sdemmc clock, fix/hifi/syspll/pcie plls, mpll, clkmsr
Change-Id: I9fe7c1d64d9db5d384070f5dcefdc69f5f60dbd2
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Mon, 18 Dec 2017 13:56:00 +0000 (21:56 +0800)]
cpuinfo: cputype api for G12A
PD#156734: cpuinfo: cputype api for G12A
Change-Id: Ib21038d4c622d0ca48c714f3773e63c89c408929
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Wed, 13 Dec 2017 03:56:38 +0000 (11:56 +0800)]
G12A: initial clk headfile for pxp
PD#156734: G12A: initial clk headfile for pxp
Change-Id: I82b549cea704d9d1b94b36dfb27eaf5547bcf172
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Tue, 12 Dec 2017 11:55:02 +0000 (19:55 +0800)]
G12A: initial dts porting for pxp
PD#156734: G12A: initial dts porting for pxp
Change-Id: I84d9bd5eb97c0ae0e04f17cd1e41b68fead0ed05
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yixun Lan [Fri, 23 Feb 2018 07:19:28 +0000 (15:19 +0800)]
ARM64: DTS: drop the q200 dts
PD#NONE: ARM64: DTS: drop the q200 dts
This will revert the Merge commit
fa121b2d3444 which introduced
by accident. After this is done, the result version is equal to
commit
cc1dabc1824c
Change-Id: I0a4e5b9a41c09f9fc6eaaf55c4453219c17c59ab
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Yalong Liu [Fri, 23 Feb 2018 06:12:34 +0000 (14:12 +0800)]
PD#NONE: test git right
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>
Yalong Liu [Thu, 22 Feb 2018 02:15:48 +0000 (10:15 +0800)]
Merge branch 'amlogic-4.9-dev' of git://git.myamlogic.com/kernel/common into amlogic-4.9-dev
Zhi Zhou [Wed, 20 Sep 2017 03:31:55 +0000 (11:31 +0800)]
media: codec_mm: fixed some bugs
PD#154520: media: fixed some bugs
1. codec_mm: fixed alloc & free statistics error bug
2. codec_mm: when some buffers have used. a big size alloc failed,
because of faragmented.
add retry for alloc small size.
and del some dump infos
3. codec_mm: fixed codec_mm fast play bug
4. don't used system's cma pool
Change-Id: I047f1bed75729cf6fe14040243d82906832c9497
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
Yicheng Shen [Wed, 14 Feb 2018 02:49:21 +0000 (10:49 +0800)]
hdmirx: fix hdmirx soundless issue
PD#159963 hdmirx: fix hdmirx soundless issue
Change-Id: I60a63af785d3a9c737814ad2d079905e4f0f07a8
Signed-off-by: Yicheng Shen <yicheng.shen@amlogic.com>
kele bai [Tue, 13 Feb 2018 07:44:13 +0000 (15:44 +0800)]
di: decoder buffer mangement changed for multi decode
PD#152765: di: no put decoder buffer after unreg
Change-Id: Ifb68b53ab35ac94905b59b0400213814a5ee6ec9
Signed-off-by: kele bai <kele.bai@amlogic.com>
Lianlian Zhu [Wed, 7 Feb 2018 14:08:16 +0000 (22:08 +0800)]
hdmi_tx: solve audiopolicy update at flash plug issue[1/1]
PD#155057: add a delay of 2000ms for disconect to filt the flash plug
Change-Id: Ic5402ccf9f03293a87ee0321c7f8754b2a1c5310
Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com>
Bencheng Jing [Fri, 9 Feb 2018 14:55:08 +0000 (22:55 +0800)]
vdin: fix black screen caused by vdin_check_vs
PD#160716: vdin: fix black screen caused by vdin_check_vs
1.add vdin msrclk in dts
2.remove vdin_check_vf
Change-Id: Ie0a63821f2eea85cf8f67202b067e4f2b491066c
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Yalong Liu [Tue, 23 Jan 2018 05:57:35 +0000 (13:57 +0800)]
drm: enable q200 drm dts
PD#158474: enable q200 drm dts
Change-Id: If9f08e4b78c9cd0ba4c3307740ad9b53dc73937a
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>
Peipeng Zhao [Sun, 11 Feb 2018 07:07:19 +0000 (15:07 +0800)]
sound: resove external loopback for 2ch pdm + 2ch loopback on axg
PD#160814: sound: resove external loopback for 2ch pdm + 2ch loopback
Change-Id: I7a558dcc3850d4d174faa3c9259394b78bf8f45b
Signed-off-by: Peipeng Zhao <peipeng.zhao@amlogic.com>
Bencheng Jing [Thu, 1 Feb 2018 13:33:01 +0000 (21:33 +0800)]
di: fix pulldown crash caused by wrong pointer
PD#160099: di: fix pulldown crash
1) fix pulldown info bit error
Change-Id: I9c111cda6efb7b3161f601d6ffe3c17838108b4a
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Nian Jing [Wed, 7 Feb 2018 03:40:59 +0000 (11:40 +0800)]
tvafe: fix palm/n flash on adjust CROSS
PD#160251: fix palm/n flash on adjust CROSS
Change-Id: Ic4a122b45a0bbeba7cbc277d73fc720e8c4d212e
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Zongdong Jiao [Wed, 7 Feb 2018 07:21:55 +0000 (15:21 +0800)]
hdmitx: remove unused print message
PD#160315: hdmitx: remove unused print message
1. if current cmd is correct, no need print extra info any more.
2. correct cmd judgement
Change-Id: I088ace66eba224359b57f6cf190eefee3076304b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Yalong Liu [Tue, 6 Feb 2018 08:24:48 +0000 (16:24 +0800)]
DRM: fix gem_prime_get_sg_table
PD#158474: fixed gem_prime_get_sg_table
modified gem_prime_get_sg_table by allocating
a sg_table for this GEM object through
sg_alloc_table and sg_set_page APIs
Change-Id: Idb7446e8ffa8700a2b8e2a2b2db1c5c3c4d62eb5
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>
tao zeng [Wed, 7 Feb 2018 02:18:07 +0000 (10:18 +0800)]
mm: Improve page trace and mm debug function
PD#160479: mm: Improve page trace and mm debug function
1. Use page->flags to store trace value in 64bit Kernel;
And this feature can be enabled default, without any
memory usage increase;
2. Sort and optimize common caller find function in pagetrace;
3. Add some debug print for secmon/of-reserved memory.
Change-Id: I70ce1629889934a5bf31b91df570afa537339479
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Nian Jing [Wed, 3 Jan 2018 03:19:44 +0000 (11:19 +0800)]
tvafe: modify avdetect config process
PD#154265: modify avdetect config process
Change-Id: I889e4244abf1a8e3ed83e7cb3d1a2d4983dc09ba
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Jianxin Pan [Tue, 6 Feb 2018 02:29:17 +0000 (18:29 -0800)]
Merge "amvecm: fix pq load fail" into amlogic-4.9-dev
MingLiang Dong [Sat, 3 Feb 2018 05:54:10 +0000 (13:54 +0800)]
amvecm: fix pq load fail
PD#158996: amvecm: fix pq load fail
Change-Id: I23d26427ebff2d13c2ea95ffa0b97c9b9a14f865
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
hongmin hua [Fri, 2 Feb 2018 08:41:32 +0000 (16:41 +0800)]
cec: add unlock for every return
PD#158781: cec: add unlock for every return
Change-Id: If4b0b563040c8c5fa62cd7e2cd3487d3663042dc
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Luan Yuan [Mon, 5 Feb 2018 02:59:50 +0000 (10:59 +0800)]
hdmitx: 2160p50zh contains 2160p50hz420 etc.[1/2]
PD#158454: hdmitx: uniform the sysfs node 'disp_cap'
Previous handling of node 'disp_cap' may contains both '2160p50hz'
and '2160p50hz420', which may confuse the application.
Now start to uniform the 'disp_cap', which will only contains valid
mode, without colorspace information. Not each combination of 'disp_cap'
and 'dc_cap' is valid, please use 'valid_mode' to test combination.
Change-Id: I2d1c97b33272ddd439acf8cadef9e35dfc2dbe82
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
kele bai [Wed, 31 Jan 2018 02:10:38 +0000 (10:10 +0800)]
di: speed up input mif read efficiency
PD#159864: di: speed up input mif read efficiency
1) change input mif read pass ratio from 50% to 66.6% according
to vlsi's suggestment
2) pass ratio = (pass_cnt + 1)/(pass_cnt + 1 + hold_cnt + 1)
Change-Id: Ib5bc274f40e3e085c22f807effbac436a02b0d76
Signed-off-by: kele bai <kele.bai@amlogic.com>
Xing Wang [Wed, 31 Jan 2018 07:49:44 +0000 (15:49 +0800)]
audio: dts: disabled dmic
PD#157997: audio: dts: disabled dmic
Change-Id: Id8a71dbf1c51db46ae2ca678952a8108707dcf03
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Bencheng Jing [Fri, 2 Feb 2018 02:38:56 +0000 (10:38 +0800)]
di: fix pq load fail
PD#158740: di: fix pq load fail
1) problem: load reg in thread run into gate turn off
2) solution: load reg in size config after gate on
add debug information for load reg fail&successful
Change-Id: I46e57f15c9231bcf4f3e889e357009e8c9b0fbaa
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Dezhi Kong [Thu, 1 Feb 2018 12:27:57 +0000 (20:27 +0800)]
di: fix flash black issue
PD#159372: di: fix flash black issue
Change-Id: Ib37b257ba1ce88d6923f68341a4782b1924ac4c6
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Peipeng Zhao [Fri, 2 Feb 2018 06:26:32 +0000 (14:26 +0800)]
sound: fixed pdm record data slow error
PD#160225: sound: fixed pdm record data slow error
Change-Id: I8a6a0ae3207c27c6928342057df44b6454de55c2
Signed-off-by: Peipeng Zhao <peipeng.zhao@amlogic.com>
Yi Zhou [Wed, 24 Jan 2018 07:22:15 +0000 (15:22 +0800)]
hdmitx: eliminate the unreasonable mutex
PD#157189: hdmitx: eliminate the unreasonable mutex
Change-Id: I0ce4ebb1440c8a346602f892cae7afafa38cbfe7
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Lianlian Zhu [Thu, 1 Feb 2018 07:02:39 +0000 (15:02 +0800)]
audio: add axg audio efuse module support
PD#160113: audio:add axg audio efuse module support
Change-Id: I3b18ea4c7b8eb5069a1038a5c5c6b11b46d198c7
Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com>
Peipeng Zhao [Wed, 31 Jan 2018 07:05:51 +0000 (15:05 +0800)]
sound: changed endian mode of pcm
and fixed pdm in i2s code clk error for gxl chip
PD#160061: sound: changed endian mode of pcm
and fixed pdm in i2s code clk error for gxl chip
Change-Id: Idb0f8bc32dbe49dafbab73c30ca20491a7e6891a
Signed-off-by: Peipeng Zhao <peipeng.zhao@amlogic.com>
hongmin hua [Sun, 28 Jan 2018 04:58:12 +0000 (12:58 +0800)]
cec: modify dts pintrl selection to default
PD#158936: cec: modify dts pintrl selection to default
Change-Id: Id6718d7920b08d856081e39806458f3baf998b4e
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Yvonne Chen [Thu, 18 Jan 2018 08:34:30 +0000 (16:34 +0800)]
tee: add tee load dynamic control
PD#159071: tee load dynamic control using disable_flag
using disable flag to disable tee load
Change-Id: I9c138e3830412ee04dcd82812b1a00cbed1ab940
Signed-off-by: Yvonne Chen <yvonne.chen@amlogic.com>
Pengguang Zhu [Wed, 10 Jan 2018 06:39:33 +0000 (14:39 +0800)]
tee: firmware: add new parameter vdec type
PD#159071: add new parameter vdec type
Change-Id: Ib3d49d2bbc56a36844d0c53a7c8a46d30543ebdc
Signed-off-by: Pengguang Zhu <pengguang.zhu@amlogic.com>
Evoke Zhang [Mon, 22 Jan 2018 03:37:13 +0000 (11:37 +0800)]
lcd: optimize lcd notifier event for power sequence
PD#158197: lcd: optimize lcd notifier event for power sequence
Change-Id: I6b91bf1c2c6e31dfa3133f078d37d32fdce2a5bd
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
wenfeng.guo [Fri, 19 Jan 2018 06:50:12 +0000 (14:50 +0800)]
di: optimize wire drawing in pulldown22 video appears on gxlx
PD#157033: di: optimize wire drawing in pulldown22 video appears on gxlx
Change-Id: I4c56cee942059794aac4969febbf35c0ef565fd3
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Kaifu Hu [Wed, 24 Jan 2018 08:14:14 +0000 (16:14 +0800)]
hdmitx: add delay for plugout
PD#157869: hdmitx: add delay for plugout
1. add delay for plugout and ignore plugout work when boot.
2. delete set display when plugin.
Change-Id: I21fee9d3f68dc5fe84bcd76efc0a8572e3976ef6
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Bencheng Jing [Fri, 26 Jan 2018 12:22:10 +0000 (20:22 +0800)]
di: fix pulldown crash for 1080i&1088i timing
PD#159599: di: fix pulldown crash for 1080i&1088i timing
Change-Id: I1f89920e195feaaa643f94d9227bf2e1a0268b15
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Nian Jing [Wed, 24 Jan 2018 06:00:34 +0000 (14:00 +0800)]
cvbs: fix display set mode block
PD#157658: add delaywork enable dac
Change-Id: I2682c80c7a28d8bfdb88e038141c3e83aea33c46
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
hongmin hua [Mon, 4 Dec 2017 11:46:55 +0000 (19:46 +0800)]
cec: set reg map before irq enable
PD#158921: cec: change the order of irq in probe
Change-Id: I8099e918a06c9d741de890b773ec6ca47ab44aba
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Matthew Shyu [Mon, 15 Jan 2018 09:07:21 +0000 (17:07 +0800)]
crypto: Enable EXT4_ENCRYPTION for file based encryption [2/4]
PD#158397: crypto: enable FBE
Encrypto CONFIG_EXT4_ENCRYPTION for file based encryption
Change-Id: Iaad3679bc9ac05eea1d44ad7c6d30a0324e82e89
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
Tellen Yu [Fri, 26 Jan 2018 07:18:22 +0000 (15:18 +0800)]
ppmgr:enable ppmgr module [1/1]
PD#157786: enable ppmgr
enable txlx ppmgr feature
Change-Id: I3939724e5a9c51349875bc340e5fcd47c2774e12
Signed-off-by: Tellen Yu <tellen.yu@amlogic.com>
Peipeng Zhao [Thu, 25 Jan 2018 05:49:44 +0000 (13:49 +0800)]
audio: add audio external loopback feature for axg chip
PD#159617: audio: add audio external loopback feature for axg chip
For S400 & S420 board, please modify dts to enable external loopback
please read following file:
Documentation/devicetree/bindings/amlogic/axg-sound-loopback.txt
Change-Id: Ie96d10eb8e6ae81aaff0b3e6965aa4e22f07f0b8
Signed-off-by: Peipeng Zhao <peipeng.zhao@amlogic.com>
Sunny Luo [Sat, 20 Jan 2018 10:02:17 +0000 (18:02 +0800)]
touchscreen: goodix gt9xx driver support
PD#158973: goodix gt9xx driver support
Change-Id: Iffac9172ab1869521ecff731f7d50ddf7ea01b14
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Yi Zhou [Fri, 19 Jan 2018 08:48:09 +0000 (16:48 +0800)]
hdmitx: update gxm dts
PD#154260: hdmitx: update gxm dts
Change-Id: Iddf3aa4512e5073f7e7dd1ba4558f38eb7998d58
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Kuibao Zhang [Mon, 22 Jan 2018 07:20:35 +0000 (15:20 +0800)]
dts: fix 8.1 r311 bt open fail
PD#159307: BT fix 8.1 r311 bt open fail
1.DTS,change bt en pin
2.FIX bt en pinmux
Change-Id: I59c5978a5b52b49f9aa1aeede93d2761bca62959
Signed-off-by: Kuibao Zhang <kuibao.zhang@amlogic.com>
Kaifu Hu [Tue, 23 Jan 2018 02:49:06 +0000 (10:49 +0800)]
hdmitx: update txlx dts
PD#159209: hdmitx: update txlx dts
add hdcp22_skpclk and hdcp22_esmclk.
Change-Id: I2a1cc3fd31cf3bb5002cdc1673573f18349f612d
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Nian Jing [Fri, 19 Jan 2018 07:38:51 +0000 (15:38 +0800)]
vbi: fix vbi crash on switch channel
PD#158142: fix vbi crash on switch channel
Change-Id: I0d4a585479b142cc585db0b00efb9d8772cc61ee
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Weiming Liu [Thu, 18 Jan 2018 02:21:13 +0000 (10:21 +0800)]
lcd: add lcd_extern p070acb driver
PD#159016: lcd_extern: add p070acb driver
Change-Id: Id2fd949f37815de1ec9bbd90170dce459b661256
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
Victor Wan [Mon, 22 Jan 2018 12:17:25 +0000 (20:17 +0800)]
Merge branch 'android-4.9' into amlogic-4.9-dev
Conflicts:
Makefile
init/main.c
Liang Yang [Wed, 13 Dec 2017 09:15:01 +0000 (17:15 +0800)]
nand: Rsv zone bug fix
PD#156785: enhance rsv ecc&incomplete abnormal handler
NOTE: Relative commit(bug156785), patch together.
Change-Id: I05f9a4c521b75f5fcd071fdf09ca76a3f0aae033
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
Xing Wang [Fri, 19 Jan 2018 15:07:58 +0000 (23:07 +0800)]
audio: dts: fix i2c for tas5707 and i2s pinmux
PD#159131: audio: dts : fix i2c for tas5707 and i2s pinmux
Change-Id: Ic4a2de8b5dcba668a793bf0c0c17d660418933b2
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Evoke Zhang [Fri, 19 Jan 2018 07:15:07 +0000 (15:15 +0800)]
lcd: optimize gpio register function for init value
PD#158752: lcd: optimize gpio register function for init value
For gpio register required init value, we can't register gpio when
lcd probe, otherwise it maybe change the gpio value which is working
by bootloader init.
So we register gpio when first calling by lcd power step controlling.
Change-Id: I629143f50924aac7e3ea27aa1a2c4b12a1992b71
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jian Wang [Fri, 19 Jan 2018 10:08:58 +0000 (18:08 +0800)]
ionvideo: update ionvideo dts for tv
PD#158997: update ionvideo dts for tv
Change-Id: Iefa4ed1b93dc244d23aa0892e04722aed2836eb7
Signed-off-by: Jian Wang <jian.wang@amlogic.com>
Sunny Luo [Thu, 18 Jan 2018 13:27:27 +0000 (21:27 +0800)]
PD#158974: touchscreen: goodix GT1X driver support
Change-Id: I45b6e97a2fdba801c681e1858a155e2df7f050fd
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log