Stefan Weil [Sun, 9 Jun 2013 20:44:22 +0000 (22:44 +0200)]
i.MX31: Fix PRCS bit test
cppcheck detected a condition which was always false.
According to the MCIMX31 Reference Manual, the PRCS bits have to be 01
to select the Frequency Pre-Multiplier (FPM). PRCS uses bits 1 and 2,
so we have to test for 2.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Message-id:
1370810662-32320-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Jun 2013 17:34:13 +0000 (18:34 +0100)]
arm/boot: Free dtb blob memory after use
The dtb blob returned by load_device_tree() is in memory allocated
with g_malloc(). Free it accordingly once we have copied its
contents into the guest memory. To make this easy, we need also to
clean up the error handling in load_dtb() so that we consistently
handle errors in the same way (by printing a message and then
returning -1, rather than either plowing on or exiting immediately).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id:
1371209256-11408-1-git-send-email-peter.maydell@linaro.org
Jean-Christophe DUBOIS [Tue, 25 Jun 2013 17:34:13 +0000 (18:34 +0100)]
i.MX: Rework functions/types name and use new style initialization
* use dynamic cast whenever possible
* Change function names to some more meaningful prefix
* Change type names to a more meaningful one
* use new style device initialization
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id:
1369898943-1993-3-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe DUBOIS [Tue, 25 Jun 2013 17:34:13 +0000 (18:34 +0100)]
i.MX: Implement a more complete version of the GPT timer.
* implement compare 1 2 and 3 registers
* simplify Debug printf
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id:
1369898943-1993-2-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
John Rigby [Tue, 25 Jun 2013 17:34:13 +0000 (18:34 +0100)]
ARM: Allow dumping of device tree
By calling qemu_devtree_dumpdtb near the end of load_dtb.
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Anthony Liguori [Mon, 24 Jun 2013 19:33:17 +0000 (14:33 -0500)]
Merge remote-tracking branch 'stefanha/block' into staging
# By Kevin Wolf (22) and Fam Zheng (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
vmdk: refuse to open higher version than supported
block: Always enable discard on the protocol level
qcow2: Batch discards
qcow2: Options to enable discard for freed clusters
qcow2: Add refcount update reason to all callers
Revert "block: Disable driver-specific options for 1.5"
ide: Clean up ide_exec_cmd()
ide: Convert SMART commands to ide_cmd_table handler
ide: Convert CF-ATA commands to ide_cmd_table handler
ide: Convert ATAPI commands to ide_cmd_table handler
ide: Convert SEEK to ide_cmd_table handler
ide: Convert FLUSH CACHE to ide_cmd_table handler
ide: Convert SET FEATURES to ide_cmd_table handler
ide: Convert CHECK POWER MDOE to ide_cmd_table handler
ide: Convert READ NATIVE MAX ADDRESS to ide_cmd_table handler
ide: Convert DMA read/write commands to ide_cmd_table handler
ide: Convert PIO read/write commands to ide_cmd_table handler
ide: Convert read/write multiple commands to ide_cmd_table handler
ide: Convert verify commands to ide_cmd_table handler
ide: Convert cmd_nop commands to ide_cmd_table handler
...
Message-id:
1372065035-19601-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 24 Jun 2013 19:33:09 +0000 (14:33 -0500)]
Merge remote-tracking branch 'spice/spice.v71' into staging
# By Gerd Hoffmann (1) and Hans de Goede (1)
# Via Gerd Hoffmann
* spice/spice.v71:
spice: Add -spice disable-agent-file-transfer cmdline option (rhbz#961850)
qxl: fix Coverity scan SIGN_EXTENSION error
Message-id:
1372060666-18182-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 24 Jun 2013 19:33:00 +0000 (14:33 -0500)]
Merge remote-tracking branch 'kraxel/usb.84' into staging
# By Andreas Färber (3) and others
# Via Gerd Hoffmann
* kraxel/usb.84:
usb: fix serial number for hid devices
usb: add serial bus property
usb-host-libusb: set USB_DEV_FLAG_IS_HOST
usb/host-libusb: Fix building with libusb git master code
usb/hcd-ehci: Add Faraday FUSBH200 support
usb/hcd-ehci: Replace PORTSC macros with variables
usb/hcd-ehci: Add Tegra2 SysBus EHCI device
usb/hcd-ehci: Split off instance_init from realize
usb/hcd-ehci-sysbus: Convert to QOM realize
Anthony Liguori [Mon, 24 Jun 2013 19:32:33 +0000 (14:32 -0500)]
Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
configure: Add signed*signed check to [u]int128_t test
Makefile: pass include directives to dtc via CPPFLAGS, not CFLAGS
qapi: lack of two commas in dict
sd: pass bool parameter for sd_init
qemu-char: use bool in qemu_chr_open_socket and simplify code a bit
vnc: use booleans for vnc_connect, vnc_listen_read and vnc_display_add_client
block/nand: Formatting sweep
qxl: Fix QXLRam initialisation.
acl: acl_add can't insert before last list element, fix
configure: Fix "ERROR: ERROR: " for missing/incompatible DTC
audio: Replace static functions in header file by macros, remove GCC_ATTR
libcacard: Fix cppcheck warning and remove unneeded code
savevm: Fix potential memory leak
kvm: Fix potential resource leak (missing fclose)
qemu-img: Add missing GCC_FMT_ATTR
qemu-options: trivial fix for -mon args help
vl: reformat SDL ifdeffery a bit
Message-id:
1371893076-9643-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Edgar E. Iglesias [Tue, 18 Jun 2013 07:22:55 +0000 (09:22 +0200)]
cadence_uart: Handle backend tx errors
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Fam Zheng [Thu, 13 Jun 2013 03:21:29 +0000 (11:21 +0800)]
vmdk: refuse to open higher version than supported
Refuse to open higher version for safety.
Although we try to be compatible with published VMDK spec, VMware has
newer version from ESXi 5.1 exported OVF/OVA, which we have no knowledge
what's changed in it. And it is very likely to have more new versions in
the future, so it's not safe to open them blindly.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:21 +0000 (13:44 +0200)]
block: Always enable discard on the protocol level
Turning on discard options in qcow2 doesn't help a lot when the discard
requests that it issues are thrown away by the raw-posix layer. This
patch always enables discard functionality on the protocol level so that
it's the image format's responsibility to send (or not) discard
requests. Requests sent by the guest will be allowed or ignored by the
top level BlockDriverState, which depends on the discard=... option like
before.
In particular, this means that even without specifying options, the
qcow2 default of discarding deleted snapshots actually takes effect now,
both for qemu and qemu-img.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:20 +0000 (13:44 +0200)]
qcow2: Batch discards
This optimises the discard operation for freed clusters by batching
discard requests (both snapshot deletion and bdrv_discard end up
updating the refcounts cluster by cluster).
Note that we don't discard asynchronously, but keep s->lock held. This
is to avoid that a freed cluster is reallocated and written to while the
discard is still in flight.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:19 +0000 (13:44 +0200)]
qcow2: Options to enable discard for freed clusters
Deleted snapshots are discarded in the image file by default, discard
requests take their default from the -drive discard=... option and other
places that free clusters must always be enabled explicitly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:18 +0000 (13:44 +0200)]
qcow2: Add refcount update reason to all callers
This adds a refcount update reason to all callers of update_refcounts(),
so that a follow-up patch can use this information to decide whether
clusters that reach a refcount of 0 should be discarded in the image
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:17 +0000 (13:44 +0200)]
Revert "block: Disable driver-specific options for 1.5"
This reverts commit
8ec7d390b0d50b5e5b4b1d8dba7ba40d64a70875.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:11 +0000 (10:26 +0200)]
ide: Clean up ide_exec_cmd()
All commands are now converted to ide_cmd_table handlers, so it can be
unconditional now and the old switch block can go.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:10 +0000 (10:26 +0200)]
ide: Convert SMART commands to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:09 +0000 (10:26 +0200)]
ide: Convert CF-ATA commands to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:08 +0000 (10:26 +0200)]
ide: Convert ATAPI commands to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:07 +0000 (10:26 +0200)]
ide: Convert SEEK to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:06 +0000 (10:26 +0200)]
ide: Convert FLUSH CACHE to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:05 +0000 (10:26 +0200)]
ide: Convert SET FEATURES to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:04 +0000 (10:26 +0200)]
ide: Convert CHECK POWER MDOE to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:03 +0000 (10:26 +0200)]
ide: Convert READ NATIVE MAX ADDRESS to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:02 +0000 (10:26 +0200)]
ide: Convert DMA read/write commands to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:01 +0000 (10:26 +0200)]
ide: Convert PIO read/write commands to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:26:00 +0000 (10:26 +0200)]
ide: Convert read/write multiple commands to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:25:59 +0000 (10:25 +0200)]
ide: Convert verify commands to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:25:58 +0000 (10:25 +0200)]
ide: Convert cmd_nop commands to ide_cmd_table handler
cmd_nop handles all commands that don't really do anything in our
implementation except setting status register flags.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:25:57 +0000 (10:25 +0200)]
ide: Convert WIN_IDENTIFY to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:25:56 +0000 (10:25 +0200)]
ide: Convert WIN_DSM to ide_cmd_table handler
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Tue, 18 Jun 2013 08:25:55 +0000 (10:25 +0200)]
ide: Add handler to ide_cmd_table
As a preparation for moving all IDE commands into their own function
like in the ATAPI code, introduce a 'handler' callback to ide_cmd_table.
Commands using this new infrastructure get some things handled
automatically:
* The BSY flag is set before calling the handler (in order to avoid bugs
like the one fixed in
f68ec837) and reset on completion.
* The (obsolete) DSC flag in the status register is set on completion if
the command is flagged with SET_DSC in the command table
* An IRQ is triggered on completion.
* The error register and the ERR flag in the status register are cleared
before calling the handler and on completion it is asserted that
either none or both of them are set.
No commands are converted at this point.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gerd Hoffmann [Wed, 12 Jun 2013 11:08:45 +0000 (13:08 +0200)]
usb: fix serial number for hid devices
commit
7b074a22dab4bdda9864b933f1bc811a3db42845 changed the serial
number of hid devices. Add compat properties to keep the old serial
number for qemu 0.12 and older.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 12 Jun 2013 11:01:49 +0000 (13:01 +0200)]
usb: add serial bus property
This patch adds a serial property for all usb devices, which can be
used to set the serial number of a usb device (as listed by lsusb -v)
to a specific value. Applies to emulated devices only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 12 Jun 2013 11:17:02 +0000 (13:17 +0200)]
usb-host-libusb: set USB_DEV_FLAG_IS_HOST
... like host-{linux,bsd}.c do.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Thu, 6 Jun 2013 14:39:34 +0000 (16:39 +0200)]
usb/host-libusb: Fix building with libusb git master code
The next libusb release will deprecate libusb_get_port_path, and since
we compile with -Werror, this breaks the build.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kuo-Jung Su [Thu, 6 Jun 2013 13:41:13 +0000 (15:41 +0200)]
usb/hcd-ehci: Add Faraday FUSBH200 support
Add Faraday FUSBH200 support, which is slightly different from EHCI spec.
(Or maybe simply a bad/wrong implementation...)
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kuo-Jung Su [Thu, 6 Jun 2013 13:41:12 +0000 (15:41 +0200)]
usb/hcd-ehci: Replace PORTSC macros with variables
Replace PORTSC macros with variables which could then be
configured in ehci_xxxx_class_init(...)
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Andreas Färber [Thu, 6 Jun 2013 13:41:11 +0000 (15:41 +0200)]
usb/hcd-ehci: Add Tegra2 SysBus EHCI device
This prepares an EHCI device for the Nvidia Tegra2 SoC family.
Values based on patch by Vincent Palatin and verified against TRM v01p.
Cc: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Andreas Färber [Thu, 6 Jun 2013 13:41:10 +0000 (15:41 +0200)]
usb/hcd-ehci: Split off instance_init from realize
This makes the mem MemoryRegion available to derived instance_inits.
Keep the bus in realize for now since naming breaks in instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Andreas Färber [Thu, 6 Jun 2013 13:41:09 +0000 (15:41 +0200)]
usb/hcd-ehci-sysbus: Convert to QOM realize
The SysBus qdev initfn merely calls SysBusDeviceClass::init, so we can
replace it with a realizefn already. This avoids getting into any initfn
ambiguity with the upcoming Faraday EHCI implementation.
Rename internal usb_ehci_initfn() to usb_ehci_realize() to allow to
return Errors from common initialization code as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Sat, 8 Jun 2013 13:37:27 +0000 (15:37 +0200)]
spice: Add -spice disable-agent-file-transfer cmdline option (rhbz#961850)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 3 Jun 2013 08:36:54 +0000 (10:36 +0200)]
qxl: fix Coverity scan SIGN_EXTENSION error
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Fri, 21 Jun 2013 13:01:31 +0000 (14:01 +0100)]
configure: Add signed*signed check to [u]int128_t test
clang 3.3 with -fsanitize=undefined will fail to link code containing an
int128_t * int128_t multiply (http://llvm.org/bugs/show_bug.cgi?id=16404)
so add this to our configure test for whether [u]int128_t are usable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 21 Jun 2013 13:00:17 +0000 (14:00 +0100)]
Makefile: pass include directives to dtc via CPPFLAGS, not CFLAGS
The dtc submodule's makefile expects -I include directives to be
in CPPFLAGS, not CFLAGS. Getting this wrong meant that the include
directive would not be applied when generating the dependency .d
files. This in turn meant that we couldn't build libfdt when
doing an out of tree build with clang. (gcc's dependency output
is slightly different from clang in this situation so it happened
to work.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Amos Kong [Wed, 19 Jun 2013 09:23:27 +0000 (17:23 +0800)]
qapi: lack of two commas in dict
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
liguang [Tue, 18 Jun 2013 03:45:36 +0000 (11:45 +0800)]
sd: pass bool parameter for sd_init
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
liguang [Tue, 18 Jun 2013 03:45:35 +0000 (11:45 +0800)]
qemu-char: use bool in qemu_chr_open_socket and simplify code a bit
Local variables is_* should be bool by usage.
While at it, simplify the logic/code a bit.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Tue, 11 Jun 2013 11:42:44 +0000 (15:42 +0400)]
vnc: use booleans for vnc_connect, vnc_listen_read and vnc_display_add_client
Some arguments to these functions are booleans - either by declaration,
or by actual usage, but sometimes value of 0 or 1 is passed for a bool,
and sometimes it is declared as int but a bool value, or true/false,
is passed to it instead. Clean it up a bit.
Cc: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Crosthwaite [Tue, 18 Jun 2013 11:08:57 +0000 (21:08 +1000)]
block/nand: Formatting sweep
Make this code closer to passing checkpatch. Mostly missing braces, but
a few rogue tabs in there as well.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Anthony PERARD [Mon, 17 Jun 2013 16:38:26 +0000 (17:38 +0100)]
qxl: Fix QXLRam initialisation.
The qxl driver expect NULL for QXLRam.memory_configs, but this is never
initialized.
If memory is set to 0xc2c2.., it leads to a spice-critical error when
trying to start qxl.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Markus Armbruster [Tue, 18 Jun 2013 08:05:23 +0000 (10:05 +0200)]
acl: acl_add can't insert before last list element, fix
Watch this:
$ upstream-qemu -nodefaults -S -vnc :0,acl,sasl -monitor stdio
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) acl_add vnc.username drei allow
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow drei
(qemu) acl_add vnc.username zwei allow 1
acl: added rule at position 2
(qemu) acl_show vnc.username
policy: deny
1: allow drei
2: allow zwei
(qemu) acl_add vnc.username eins allow 1
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow eins
2: allow drei
3: allow zwei
The second acl_add inserts at position 2 instead of 1.
Root cause is an off-by-one in qemu_acl_insert(): when index ==
acl->nentries, it appends instead of inserting before the last list
element.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Andreas Färber [Mon, 17 Jun 2013 23:09:06 +0000 (01:09 +0200)]
configure: Fix "ERROR: ERROR: " for missing/incompatible DTC
error_exit already prepends "ERROR: ", so no need to print it manually.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Jun 2013 09:19:31 +0000 (11:19 +0200)]
audio: Replace static functions in header file by macros, remove GCC_ATTR
Using macros instead of static functions for dolog and for ldebug
simplifies the code and can also reduce the total code size.
GCC_ATTR was only used in audio_int.h, so it is now unused and
the definition can be removed from compiler.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Jun 2013 09:08:52 +0000 (11:08 +0200)]
libcacard: Fix cppcheck warning and remove unneeded code
The local function vcard_emul_alloc_arrays always returned PR_TRUE.
Therefore cppcheck complained about code which handled the
non-existent PR_FALSE case.
Remove the function's return value and the dead code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Jun 2013 11:33:05 +0000 (13:33 +0200)]
savevm: Fix potential memory leak
The leak was reported by cppcheck. Fix it by moving the g_malloc0 after
the argument validity check.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Jun 2013 11:37:25 +0000 (13:37 +0200)]
kvm: Fix potential resource leak (missing fclose)
This leak was detected by cppcheck.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sun, 16 Jun 2013 15:01:05 +0000 (17:01 +0200)]
qemu-img: Add missing GCC_FMT_ATTR
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Sat, 15 Jun 2013 09:47:32 +0000 (13:47 +0400)]
qemu-options: trivial fix for -mon args help
It is the (implied sub)option name which is optional, not
the value of that (sub)option, make it so in the help output.
(Introduced by commit
22a0e04b9bb)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Sat, 15 Jun 2013 10:44:20 +0000 (14:44 +0400)]
vl: reformat SDL ifdeffery a bit
This reformats #ifdef..#endif and case statement a bit,
to make it a bit shorter and matching other cases like that
(no code changes).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Anthony Liguori [Thu, 20 Jun 2013 21:53:39 +0000 (16:53 -0500)]
Merge remote-tracking branch 'bonzini/iommu-for-anthony' into staging
# By Paolo Bonzini (12) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony: (25 commits)
memory: render_memory_region: factor out fr constant setters
memory: as_update_topology_pass: Improve comments
memory: Fix comment typo
memory: give name to every AddressSpace
dma: eliminate DMAContext
spapr_vio: take care of creating our own AddressSpace/DMAContext
pci: use memory core for iommu support
dma: eliminate old-style IOMMU support
spapr: use memory core for iommu support
spapr: make IOMMU translation go through IOMMUTLBEntry
spapr: convert TCE API to use an opaque type
vfio: abort if an emulated iommu is used
memory: Add iommu map/unmap notifiers
memory: iommu support
memory: make section size a 128-bit integer
exec: reorganize mem_add to match Int128 version
Revert "s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62"
Revert "memory: limit sections in the radix tree to the actual address space size"
exec: return MemoryRegion from address_space_translate
exec: Implement subpage_read/write via address_space_rw
...
Message-id:
1371739493-10187-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 20 Jun 2013 21:53:08 +0000 (16:53 -0500)]
Merge remote-tracking branch 'kiszka/queues/slirp' into staging
# By Bas van Sisseren (1) and Gertjan Halkes (1)
# Via Jan Kiszka
* kiszka/queues/slirp:
make user networking hostfwd work with restrict=y
fix -net user checks by reordering checks
Message-id: cover.
1371638848.git.jan.kiszka@siemens.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Crosthwaite [Mon, 3 Jun 2013 05:33:29 +0000 (15:33 +1000)]
memory: render_memory_region: factor out fr constant setters
These 4 replicated lines set properties of fr that are constant over
the course of the function. Factor out their repeated setting (and also
guards against them being set multiple times in the loop below).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Crosthwaite [Mon, 3 Jun 2013 05:32:42 +0000 (15:32 +1000)]
memory: as_update_topology_pass: Improve comments
These comments were a little difficult to read. First one had
incorrect parenthesis. The part about attributes changing is
really applicable to the region being 'in both' rather than 'in
new'
Second comment has an obscure parenthetic about 'Logging may have
changed'. Made clearer, as this if is supposed to handle the case where
the memory region is unchanged (with the notable exception re logging).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Crosthwaite [Mon, 3 Jun 2013 05:31:56 +0000 (15:31 +1000)]
memory: Fix comment typo
s/ajacent/adjacent
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexey Kardashevskiy [Mon, 29 Apr 2013 16:25:51 +0000 (16:25 +0000)]
memory: give name to every AddressSpace
The "info mtree" command in QEMU console prints only "memory" and "I/O"
address spaces while there are actually a lot more other AddressSpace
structs created by PCI and VIO devices. Those devices do not normally
have names and therefore not present in "info mtree" output.
The patch fixes this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 10 Apr 2013 16:15:49 +0000 (18:15 +0200)]
dma: eliminate DMAContext
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 11 Apr 2013 10:38:50 +0000 (12:38 +0200)]
spapr_vio: take care of creating our own AddressSpace/DMAContext
Fetch the root region from the sPAPRTCETable, and use it to build
an AddressSpace and DMAContext.
Now, everywhere we have a DMAContext we also have access to the
corresponding AddressSpace (either because we create it just before
the DMAContext, or because dma_context_memory's AddressSpace is
trivially address_space_memory).
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avi Kivity [Tue, 30 Oct 2012 11:47:48 +0000 (13:47 +0200)]
pci: use memory core for iommu support
Use the new iommu support in the memory core for iommu support. The only
user, spapr, is also converted, but it still provides a DMAContext
interface until the non-PCI bits switch to AddressSpace.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Do not calls memory_region_del_subregion() on the device's
bus_master_enable_region, it is an alias; return an AddressSpace
from the IOMMU hook and remove the destructor hook. - David Gibson ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 10 Apr 2013 15:49:04 +0000 (17:49 +0200)]
dma: eliminate old-style IOMMU support
The translate function in the DMAContext is now always NULL.
Remove every reference to it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 11 Apr 2013 10:35:33 +0000 (12:35 +0200)]
spapr: use memory core for iommu support
Now we can stop using a "translating" DMAContext, but we do not yet modify
the sPAPRTCETable users to get an AddressSpace; they keep using the table
via a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 16 Apr 2013 13:05:06 +0000 (15:05 +0200)]
spapr: make IOMMU translation go through IOMMUTLBEntry
The next step is to introduce the translation code that will be used for
IOMMU MemoryRegions, but still do the actual translation in a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 10 Apr 2013 15:30:48 +0000 (17:30 +0200)]
spapr: convert TCE API to use an opaque type
The TCE table is currently returned as a DMAContext, and non-type-safe
APIs are called later passing back the DMAContext. Since we want to move
away from DMAContext, use an opaque type instead, and add an accessor
to retrieve the DMAContext from it.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avi Kivity [Tue, 30 Oct 2012 11:47:49 +0000 (13:47 +0200)]
vfio: abort if an emulated iommu is used
vfio doesn't support guest iommus yet, indicate it to the user
by gently depositing a core on their disk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Gibson [Tue, 14 May 2013 09:13:56 +0000 (19:13 +1000)]
memory: Add iommu map/unmap notifiers
This patch adds a NotifierList to MemoryRegions which represent IOMMUs
allowing other parts of the code to register interest in mappings or
unmappings from the IOMMU. All IOMMU implementations will need to call
memory_region_notify_iommu() to inform those waiting on the notifier list,
whenever an IOMMU mapping is made or removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avi Kivity [Tue, 30 Oct 2012 11:47:46 +0000 (13:47 +0200)]
memory: iommu support
Add a new memory region type that translates addresses it is given,
then forwards them to a target address space. This is similar to
an alias, except that the mapping is more flexible than a linear
translation and trucation, and also less efficient since the
translation happens at runtime.
The implementation uses an AddressSpace mapping the target region to
avoid hierarchical dispatch all the way to the resolved region; only
iommu regions are looked up dynamically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[Modified to put translation in address_space_translate; assume
IOMMUs are not reachable from TCG. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 27 May 2013 08:08:27 +0000 (10:08 +0200)]
memory: make section size a 128-bit integer
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes
An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 27 May 2013 08:47:10 +0000 (10:47 +0200)]
exec: reorganize mem_add to match Int128 version
When adding support for 2^64-byte sections, we will have to change
the structure of mem_add to avoid failures in int128_get64.
Reorganize the code now before introducing Int128.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 27 May 2013 11:18:06 +0000 (13:18 +0200)]
Revert "s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62"
This reverts commit
311f83ca08c011b048c063c2fd3038a8957970bc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 27 May 2013 11:18:01 +0000 (13:18 +0200)]
Revert "memory: limit sections in the radix tree to the actual address space size"
This reverts commit
86a8623692b1b559a419a92eb8b6897c221bca74.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 29 May 2013 10:42:00 +0000 (12:42 +0200)]
exec: return MemoryRegion from address_space_translate
Only address_space_translate_for_iotlb needs to return the section.
Every caller of address_space_translate now uses only section->mr,
return it directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jan Kiszka [Sun, 26 May 2013 19:55:37 +0000 (21:55 +0200)]
exec: Implement subpage_read/write via address_space_rw
This will allow to add support for unaligned memory regions: the subpage
container region can activate unaligned support unconditionally because
the read/write handler will now ensure that accesses are split as
required by calling address_space_rw. We can furthermore drop the
special handling of RAM subpages, address_space_rw takes care of this
already.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jan Kiszka [Sun, 26 May 2013 19:46:51 +0000 (21:46 +0200)]
exec: Resolve subpages in one step except for IOTLB fills
Except for the case of setting the IOTLB entry in TCG mode, we can avoid
the subpage dispatching handlers and do the resolution directly on
address_space_lookup_region. An IOTLB entry describes a full page, not
only the region that the first access to a sub-divided page may return.
This patch therefore introduces a special translation function,
address_space_translate_for_iotlb, that avoids the subpage resolutions.
In contrast, callers of the existing address_space_translate service
will now always receive the terminal memory region section. This will be
important for breaking the BQL and for enabling unaligned memory region.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jan Kiszka [Sun, 26 May 2013 19:42:40 +0000 (21:42 +0200)]
exec: Allow unaligned address_space_rw
This will be needed for some corner cases with para-virtual I/O ports.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 21 May 2013 10:07:21 +0000 (12:07 +0200)]
memory: move private types to exec.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jan Kiszka [Mon, 6 May 2013 14:48:02 +0000 (16:48 +0200)]
memory: Introduce address_space_lookup_region
This introduces a wrapper for phys_page_find (before we complicate
address_space_translate with IOMMU translation). This function will
also encapsulate locking and reference counting when we introduce
BQL-free dispatching.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 20 Jun 2013 14:18:04 +0000 (15:18 +0100)]
exec.c: address_space_translate: handle access to addr 0 of 2^64 sized region
The memory API allows a MemoryRegion's size to be 2^64, as a special
case (otherwise the size always fits in a 64 bit integer). This meant
that attempts to access address zero in a 2^64 sized region would
assert in address_space_translate():
#3 0x00007ffff3e4d192 in __GI___assert_fail#(assertion=0x555555a43f32
"!a.hi", file=0x555555a43ef0 "include/qemu/int128.h", line=18,
function=0x555555a4439f "int128_get64") at assert.c:103
#4 0x0000555555877642 in int128_get64 (a=...)
at include/qemu/int128.h:18
#5 0x00005555558782f2 in address_space_translate (as=0x55555668d140,
/addr=0, xlat=0x7fffafac9918, plen=0x7fffafac9920, is_write=false)
at exec.c:221
Fix this by doing the 'min' operation in 128 bit arithmetic
rather than 64 bit arithmetic (we know the result of the 'min'
definitely fits in 64 bits because one of the inputs did).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Markus Armbruster [Fri, 14 Jun 2013 11:15:06 +0000 (13:15 +0200)]
doc: Drop ref to Bochs from -no-fd-bootchk documentation
Manual page and qemu-doc on talk about "Bochs BIOS". We use SeaBIOS,
and it implements the feature. Replace by just "BIOS", and drop the
TODO line wondering about the Bochs reference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1371208516-7857-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 14 Jun 2013 11:15:05 +0000 (13:15 +0200)]
pc: Make -no-fd-bootchk stick across boot order changes
Option -no-fd-bootchk asks the BIOS to attempt booting from a floppy
even when the boot sector signature isn't there, by setting a bit in
RTC CMOS. It was added back in 2006 (commit
52ca8d6a).
Two years later, commit
0ecdffbb added monitor command boot_set.
Implemented by new function pc_boot_set(). It unconditionally clears
the floppy signature bit in CMOS.
Commit
e0f084bf added -boot option once to automatically change the
boot order on first reset. Reuses pc_boot_set(), thus also clears the
floppy signature bit. Commit
d9346e81 took care to preserve this
behavior.
Thus, -no-fd-bootchk applies to any number of boots. Except it
applies just to the first boot with -boot once, and never after
boot_set. Weird. Make it stick instead: set the bit according to
-no-fd-bootchk in pc_boot_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1371208516-7857-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 14 Jun 2013 11:15:04 +0000 (13:15 +0200)]
vl: Rename *boot_devices to *boot_order, for consistency
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1371208516-7857-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 14 Jun 2013 11:15:03 +0000 (13:15 +0200)]
vl: Fix -boot order and once regressions, and related bugs
Option "once" sets up a different boot order just for the initial
boot. Boot order reverts back to normal on reset. Option "order"
changes the normal boot order.
The reversal is implemented by reset handler restore_boot_devices(),
which takes the boot order to revert to as argument.
restore_boot_devices() does nothing on its first call, because that
must be the initial machine reset. On its second call, it changes the
boot order back, and unregisters itself.
Because we register the handler right when -boot gets parsed, we can
revert to an incorrect normal boot order, and multiple -boot can
interact in funny ways.
Here's how things work without -boot once or order:
* boot_devices is "".
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "". machine->init() configures firmware
accordingly. For PC machines, machine->boot_order is "cad", and
pc_cmos_init() writes it to RTC CMOS, where SeaBIOS picks it up.
Now consider -boot order=:
* boot_devices is "".
* -boot order= sets boot_devices to "" (no change).
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "", as above.
Bug: -boot order= has no effect. Broken in commit
e4ada29e.
Next, consider -boot once=a:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* main() passes boot_devices "a" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "a".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of machine->boot_order. The
actual boot order depends on how firmware interprets "". Broken
in commit
e4ada29e.
Next, consider -boot once=a -boot order=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot order=c sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "c".
Bug: it should be "a". I figure this has always been broken.
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of "c". I figure this has
always been broken, just differently broken before commit
e4ada29e.
Next, consider -boot once=a -boot once=b -boot once=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot once=b registers restore_boot_devices() with argument "a", and
sets boot_devices to "b".
* -boot once=c registers restore_boot_devices() with argument "b", and
sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
- restore_boot_devices() gets called with argument "a". Calls
qemu_boot_set("a") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
- restore_boot_devices() gets called with argument "b". Calls
qemu_boot_set("b") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
* Machine boots, boot order is "b".
Bug: should really be "c", because that came last, and for all other
-boot options, the last one wins. I figure this was broken some
time before commit
37905d6a, and fixed there only for a single
occurence of "once".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Same bug as above: boot order reverts to "" instead of
machine->boot_order.
Fix by acting upon -boot options order, once and menu only after
option parsing is complete, and the machine is known. This is how the
other -boot options work already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1371208516-7857-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 14 Jun 2013 11:15:02 +0000 (13:15 +0200)]
qemu-option: check_params() is now unused, drop it
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1371208516-7857-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 14 Jun 2013 11:15:01 +0000 (13:15 +0200)]
vl: Clean up parsing of -boot option argument
Commit
3d3b8303 threw in some QemuOpts parsing without replacing the
existing ad hoc parser, resulting in a confusing mess. Clean it up.
Two user-visible changes:
1. Invalid options are reported more nicely. Before:
qemu: unknown boot parameter 'x' in 'x=y'
After:
qemu-system-x86_64: -boot x=y: Invalid parameter 'x'
2. If -boot is given multiple times, options accumulate, just like for
-machine. Before, only options order, once and menu accumulated.
For the other ones, all but the first -boot in non-legacy syntax
got simply ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id:
1371208516-7857-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gertjan Halkes [Fri, 11 Nov 2011 15:04:20 +0000 (16:04 +0100)]
make user networking hostfwd work with restrict=y
This patch allows the hostfwd option to override the restrict=y setting in
the user network stack, as explicitly stated in the documentation on the
restrict option:
restrict=on|off
If this option is enabled, the guest will be isolated, i.e. it
will not be able to contact the host and no guest IP packets
will be routed over the host to the outside. This option does
not affect any explicitly set forwarding rules.
Qemu bug tracker:
https://bugs.launchpad.net/qemu/+bug/829455
Signed-off-by: Gertjan Halkes <qemu@ghalkes.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Bas van Sisseren [Mon, 3 Jun 2013 13:11:49 +0000 (15:11 +0200)]
fix -net user checks by reordering checks
reorder slirp config options. first check the dns-server-address,
then check the first-dhcp-address. the original code was comparing
the first-dhcp-address with the default dns-server-address, not
the configured dns-server-address.
Signed-off-by: Bas van Sisseren <bas@quarantainenet.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Michael Roth [Wed, 22 May 2013 16:32:51 +0000 (11:32 -0500)]
wdt_i6300esb: fix vmstate versioning
When this VMSD was introduced it's version fields were set to
sizeof(I6300State), making them essentially random from build to build,
version to version.
To fix this, we lock in a high version id and low minimum version id to
support old->new migration from all prior versions of this device's
state. This should work since the device state has not changed since
its introduction.
The potentially breaks migration from 1.5+ to 1.5, but since the
versioning was essentially random prior to this patch, new->old
migration was not consistently functional to begin with.
Reported-by: Nicholas Thomas <nick@bytemark.co.uk>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 18 Jun 2013 15:06:47 +0000 (10:06 -0500)]
Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Paolo Bonzini (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
iscsi: reorganize iscsi_readcapacity_sync
iscsi: simplify freeing of tasks
vhost-scsi: fix k->set_guest_notifiers() NULL dereference
scsi-disk: scsi-block device for scsi pass-through should not be removable
scsi-generic: check the return value of bdrv_aio_ioctl in execute_command
scsi-generic: fix sign extension of READ CAPACITY(10) data
scsi: reset cdrom tray statuses on scsi_disk_reset
Message-id:
1371565016-2643-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 18 Jun 2013 15:06:39 +0000 (10:06 -0500)]
Merge remote-tracking branch 'bonzini/nbd-next' into staging
# By Ján Tomko
# Via Paolo Bonzini
* bonzini/nbd-next:
nbd: strip braces from literal IPv6 address in URI
qemu-socket: allow hostnames starting with a digit
Cole Robinson [Fri, 31 May 2013 18:12:48 +0000 (14:12 -0400)]
virtio-rng: Fix crash with non-default backend
'default_backend' isn't always set, but 'rng' is, so use that.
$ ./x86_64-softmmu/qemu-system-x86_64 -object rng-random,id=rng0,filename=/dev/random -device virtio-rng-pci,rng=rng0
Segmentation fault (core dumped)
Regressed with virtio refactoring in
59ccd20a9ac719cff82180429458728f03ec612f
CC: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id:
bf4505014a0a941dbd3c62068f3cf2c496b69e6a.
1370023944.git.crobinso@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>