Thomas Gleixner [Thu, 10 Dec 2020 19:25:51 +0000 (20:25 +0100)]
pinctrl: nomadik: Use irq_has_action()
Let the core code do the fiddling with irq_desc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201210194044.065003856@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:50 +0000 (20:25 +0100)]
drm/i915/pmu: Replace open coded kstat_irqs() copy
Driver code has no business with the internals of the irq descriptor.
Aside of that the count is per interrupt line and therefore takes
interrupts from other devices into account which share the interrupt line
and are not handled by the graphics driver.
Replace it with a pmu private count which only counts interrupts which
originate from the graphics card.
To avoid atomics or heuristics of some sort make the counter field
'unsigned long'. That limits the count to 4e9 on 32bit which is a lot and
postprocessing can easily deal with the occasional wraparound.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://lore.kernel.org/r/20201210194043.957046529@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:49 +0000 (20:25 +0100)]
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
Nothing uses the result and nothing should ever use it in driver code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20201210194043.862572239@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:48 +0000 (20:25 +0100)]
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
The irq descriptor is already there, no need to look it up again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20201210194043.769108348@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:47 +0000 (20:25 +0100)]
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
The irq descriptor is already there, no need to look it up again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-parisc@vger.kernel.org
Link: https://lore.kernel.org/r/20201210194043.659522455@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:46 +0000 (20:25 +0100)]
arm64/smp: Use irq_desc_kstat_cpu() in arch_show_interrupts()
The irq descriptor is already there, no need to look it up again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201210194043.546326568@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:45 +0000 (20:25 +0100)]
ARM: smp: Use irq_desc_kstat_cpu() in show_ipi_list()
The irq descriptor is already there, no need to look it up again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201210194043.454288890@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:44 +0000 (20:25 +0100)]
genirq: Provide kstat_irqdesc_cpu()
Most users of kstat_irqs_cpu() have the irq descriptor already. No point in
calling into the core code and looking it up once more.
Use it in per_cpu_count_show() to start with.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201210194043.362094758@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:43 +0000 (20:25 +0100)]
genirq: Make kstat_irqs() static
No more users outside the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201210194043.268774449@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:42 +0000 (20:25 +0100)]
parisc/irq: Simplify irq count output for /proc/interrupts
The SMP variant works perfectly fine on UP as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-parisc@vger.kernel.org
Link: https://lore.kernel.org/r/20201210194043.172893840@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:41 +0000 (20:25 +0100)]
genirq: Annotate irq stats data races
Both the per cpu stats and the accumulated count are accessed lockless and
can be concurrently modified. That's intentional and the stats are a rough
estimate anyway. Annotate them with data_race().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201210194043.067097663@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:40 +0000 (20:25 +0100)]
genirq: Provide irq_get_effective_affinity()
Provide an accessor to the effective interrupt affinity mask. Going to be
used to replace open coded fiddling with the irq descriptor.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201210194042.967177918@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:39 +0000 (20:25 +0100)]
genirq: Move irq_set_lockdep_class() to core
irq_set_lockdep_class() is used from modules and requires irq_to_desc() to
be exported. Move it into the core code which lifts another requirement for
the export.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201210194042.860029489@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:38 +0000 (20:25 +0100)]
genirq: Move status flag checks to core
These checks are used by modules and prevent the removal of the export of
irq_to_desc(). Move the accessor into the core.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201210194042.703779349@linutronix.de
Thomas Gleixner [Thu, 10 Dec 2020 19:25:37 +0000 (20:25 +0100)]
genirq: Move irq_has_action() into core code
This function uses irq_to_desc() and is going to be used by modules to
replace the open coded irq_to_desc() (ab)usage. The final goal is to remove
the export of irq_to_desc() so driver cannot fiddle with it anymore.
Move it into the core code and fixup the usage sites to include the proper
header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201210194042.548936472@linutronix.de
Thomas Gleixner [Tue, 15 Dec 2020 09:48:07 +0000 (10:48 +0100)]
Merge tag 'irqchip-5.11' of git://git./linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 5.11 from Marc Zyngier:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Remove the fasteoi IPI flow which has been proved useless
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
Douglas Anderson [Fri, 11 Dec 2020 22:15:35 +0000 (14:15 -0800)]
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
We have a problem if we use gpio-keys and configure wakeups such that
we only want one edge to wake us up. AKA:
wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
Specifically we end up with a phantom interrupt that blocks suspend if
the line was already high and we want wakeups on rising edges (AKA we
want the GPIO to go low and then high again before we wake up). The
opposite is also problematic.
Specifically, here's what's happening today:
1. Normally, gpio-keys configures to look for both edges. Due to the
current workaround introduced in commit
c3c0c2e18d94 ("pinctrl:
qcom: Handle broken/missing PDC dual edge IRQs on sc7180"), if the
line was high we'd configure for falling edges.
2. At suspend time, we change to look for rising edges.
3. After qcom_pdc_gic_set_type() runs, we get a phantom interrupt.
We can solve this by just clearing the phantom interrupt.
NOTE: it is possible that this could cause problems for a client with
very specific needs, but there's not much we can do with this
hardware. As an example, let's say the interrupt signal is currently
high and the client is looking for falling edges. The client now
changes to look for rising edges. The client could possibly expect
that if the line has a short pulse low (and back high) that it would
always be detected. Specifically no matter when the pulse happened,
it should either have tripped the (old) falling edge trigger or the
(new) rising edge trigger. We will simply not trip it. We could
narrow down the race a bit by polling our parent before changing
types, but no matter what we do there will still be a period of time
where we can't tell the difference between a real transition (or more
than one transition) and the phantom.
Fixes:
f55c73aef890 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201211141514.v4.1.I2702919afc253e2a451bebc3b701b462b2d22344@changeid
John Garry [Wed, 2 Dec 2020 10:36:56 +0000 (18:36 +0800)]
driver core: platform: Add devm_platform_get_irqs_affinity()
Drivers for multi-queue platform devices may also want managed interrupts
for handling HW queue completion interrupts, so add support.
The function accepts an affinity descriptor pointer, which covers all IRQs
expected for the device.
The function is devm class as the only current in-tree user will also use
devm method for requesting the interrupts; as such, the function is made
as devm as it can ensure ordering of freeing the irq and disposing of the
mapping.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1606905417-183214-5-git-send-email-john.garry@huawei.com
John Garry [Wed, 2 Dec 2020 10:36:55 +0000 (18:36 +0800)]
ACPI: Drop acpi_dev_irqresource_disabled()
The functionality of acpi_dev_irqresource_disabled() is same as in common
irqresource_disabled(), so drop acpi_dev_irqresource_disabled() in favour
of that function.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-4-git-send-email-john.garry@huawei.com
John Garry [Wed, 2 Dec 2020 10:36:54 +0000 (18:36 +0800)]
resource: Add irqresource_disabled()
Add a common function to set the fields for a irq resource to disabled,
which mimics what is done in acpi_dev_irqresource_disabled(), with a view
to replace that function.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-3-git-send-email-john.garry@huawei.com
John Garry [Wed, 2 Dec 2020 10:36:53 +0000 (18:36 +0800)]
genirq/affinity: Add irq_update_affinity_desc()
Add a function to allow the affinity of an interrupt be switched to
managed, such that interrupts allocated for platform devices may be
managed.
This new interface has certain limitations, and attempts to use it in the
following circumstances will fail:
- For when the kernel is configured for generic IRQ reservation mode (in
config GENERIC_IRQ_RESERVATION_MODE). The reason being that it could
conflict with managed vs. non-managed interrupt accounting.
- The interrupt is already started, which should not be the case during
init
- The interrupt is already configured as managed, which means double init
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1606905417-183214-2-git-send-email-john.garry@huawei.com
Marc Zyngier [Sun, 29 Nov 2020 13:52:08 +0000 (13:52 +0000)]
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
An aliasing PCI bridge is another case where we should flag the
corresponding allocation as "proxied", as MSIs are coming with
the bridge's RID, and not the originating device's.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20201129135208.680293-4-maz@kernel.org
Marc Zyngier [Sun, 29 Nov 2020 13:52:07 +0000 (13:52 +0000)]
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
The ITS already has some notion of "shared" devices. Let's map the
MSI_ALLOC_FLAGS_PROXY_DEVICE flag onto this internal property.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20201129135208.680293-3-maz@kernel.org
Marc Zyngier [Sun, 29 Nov 2020 13:52:06 +0000 (13:52 +0000)]
platform-msi: Track shared domain allocation
We have two flavours of platform-MSI:
- MSIs generated by devices for themselves (the usual case)
- MSIs generated on behalf of other devices, as the generating
device is some form of bridge (either a wire-to-MSI bridge,
or even a non-transparent PCI bridge that repaints the PCI
requester ID).
In the latter case, the underlying interrupt architecture may need
to track this in order to keep the mapping alive even when no MSI
are currently being generated.
Add a set of flags to the generic msi_alloc_info_t structure, as
well as the MSI_ALLOC_FLAGS_PROXY_DEVICE flag that will get
advertized by the platform-MSI code when allocating an irqdomain
for a device.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20201129135208.680293-2-maz@kernel.org
Lokesh Vutla [Mon, 2 Nov 2020 12:06:31 +0000 (17:36 +0530)]
irqchip/ti-sci-intr: Fix freeing of irqs
ti_sci_intr_irq_domain_free() assumes that out_irq of intr is stored in
data->chip_data and uses it for calling ti_sci irq_free() and then
mark the out_irq as available resource. But ti_sci_intr_irq_domain_alloc()
is storing p_hwirq(parent's hardware irq) which is translated from out_irq.
This is causing resource leakage and eventually out_irq resources might
be exhausted. Fix ti_sci_intr_irq_domain_alloc() by storing the out_irq
in data->chip_data.
Fixes:
a5b659bd4bc7 ("irqchip/ti-sci-intr: Add support for INTR being a parent to INTR")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120631.11165-1-lokeshvutla@ti.com
Lokesh Vutla [Mon, 2 Nov 2020 12:06:14 +0000 (17:36 +0530)]
irqchip/ti-sci-inta: Fix printing of inta id on probe success
On a successful probe, the driver tries to print a success message with
INTA device id. It uses pdev->id for printing the id but id is stored in
inta->ti_sci_id. Fix it by correcting the dev_info parameter.
Fixes:
5c4b585d2910 ("irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120614.11109-1-lokeshvutla@ti.com
Vineet Gupta [Thu, 5 Nov 2020 21:22:09 +0000 (13:22 -0800)]
drivers/irqchip: Remove EZChip NPS interrupt controller
NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20201105212210.1891598-3-vgupta@synopsys.com
Valentin Schneider [Mon, 9 Nov 2020 09:41:21 +0000 (09:41 +0000)]
Revert "genirq: Add fasteoi IPI flow"
handle_percpu_devid_fasteoi_ipi() has no more users, and
handle_percpu_devid_irq() can do all that it was supposed to do. Get rid of
it.
This reverts commit
c5e5ec033c4ab25c53f1fd217849e75deb0bf7bf.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-6-valentin.schneider@arm.com
Valentin Schneider [Mon, 9 Nov 2020 09:41:20 +0000 (09:41 +0000)]
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
As done for the Arm GIC irqchips, move IPIs to handle_percpu_devid_irq() as
handle_percpu_devid_fasteoi_ipi() isn't actually required.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-5-valentin.schneider@arm.com
Valentin Schneider [Mon, 9 Nov 2020 09:41:19 +0000 (09:41 +0000)]
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
As done for the Arm GIC irqchips, move IPIs to handle_percpu_devid_irq() as
handle_percpu_devid_fasteoi_ipi() isn't actually required.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-4-valentin.schneider@arm.com
Valentin Schneider [Mon, 9 Nov 2020 09:41:18 +0000 (09:41 +0000)]
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
As done for the Arm GIC irqchips, move IPIs to handle_percpu_devid_irq() as
handle_percpu_devid_fasteoi_ipi() isn't actually required.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-3-valentin.schneider@arm.com
Valentin Schneider [Mon, 9 Nov 2020 09:41:17 +0000 (09:41 +0000)]
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
handle_percpu_devid_fasteoi_ipi() states:
* The biggest difference with the IRQ version is that the interrupt is
* EOIed early, as the IPI could result in a context switch, and we need to
* make sure the IPI can fire again
All that can actually happen scheduler-wise within the handling of an IPI
is the raising of TIF_NEED_RESCHED (and / or folding thereof into
preempt_count); see scheduler_ipi() or sched_ttwu_pending() for instance.
Said flag / preempt_count is evaluated some time later before returning to
whatever context was interrupted, and this gates a call to
preempt_schedule_irq() (arm64_preempt_schedule_irq() in arm64).
Per the above, SGI's do not need a different handler than PPI's, so make
them use the same (handle_percpu_devid_irq).
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-2-valentin.schneider@arm.com
Gregory CLEMENT [Wed, 25 Nov 2020 10:32:06 +0000 (11:32 +0100)]
irqchip/ocelot: Add support for Jaguar2 platforms
This patch extends irqchip driver for ocelot to be used with an other
vcoreiii base platform: Jaguar2.
Based on a larger patch from Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-7-gregory.clement@bootlin.com
Gregory CLEMENT [Wed, 25 Nov 2020 10:32:05 +0000 (11:32 +0100)]
irqchip/ocelot: Add support for Serval platforms
This patch extends irqchip driver for ocelot to be used with an other
vcoreiii base platform: Serval.
Based on a larger patch from Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-6-gregory.clement@bootlin.com
Gregory CLEMENT [Wed, 25 Nov 2020 10:32:04 +0000 (11:32 +0100)]
irqchip/ocelot: Add support for Luton platforms
This patch extends irqchip driver for oceleot to be used with an other
vcoreiii base platform: Luton.
For this platform there is a few differences:
- the interrupt must be enabled for the parent controller
- there is no trigger register needed to be managed
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-5-gregory.clement@bootlin.com
Gregory CLEMENT [Wed, 25 Nov 2020 10:32:03 +0000 (11:32 +0100)]
irqchip/ocelot: prepare to support more SoC
This patch extends irqchip driver for oceleot to be used with other
vcoreiii base platforms.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-4-gregory.clement@bootlin.com
Gregory CLEMENT [Wed, 25 Nov 2020 10:32:02 +0000 (11:32 +0100)]
dt-bindings: interrupt-controller: Add binding for few Microsemi interrupt controllers
Add the Device Tree binding documentation for the Microsemi Jaguar2,
Luton and Serval interrupt controller that is part of the ICPU. It is
connected directly to the MIPS core interrupt controller.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201125103206.136498-3-gregory.clement@bootlin.com
Gregory CLEMENT [Wed, 25 Nov 2020 10:32:01 +0000 (11:32 +0100)]
dt-bindings: interrupt-controller: convert icpu intr bindings to json-schema
Convert device tree bindings for Microsemi Ocelot SoC ICPU Interrupt
Controller to YAML format
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201125103206.136498-2-gregory.clement@bootlin.com
Shenming Lu [Sat, 28 Nov 2020 14:18:56 +0000 (22:18 +0800)]
irqchip/gic-v4.1: Reduce the delay when polling GICR_VPENDBASER.Dirty
The 10us delay of the poll on the GICR_VPENDBASER.Dirty bit is too
high, which might greatly affect the total scheduling latency of a
vCPU in our measurement. So we reduce it to 1 to lessen the impact.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201128141857.983-2-lushenming@huawei.com
Marc Zyngier [Sun, 29 Nov 2020 13:55:25 +0000 (13:55 +0000)]
irqchip/alpine-msi: Fix freeing of interrupts on allocation error path
The alpine-msi driver has an interesting allocation error handling,
where it frees the same interrupts repeatedly. Hilarity follows.
This code is probably never executed, but let's fix it nonetheless.
Fixes:
e6b78f2c3e14 ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201129135525.396671-1-maz@kernel.org
Biwen Li [Mon, 30 Nov 2020 10:15:15 +0000 (18:15 +0800)]
dt-bindings: interrupt-controller: update bindings for supporting more SoCs
Update bindings for Layerscape external irqs,
support more SoCs(LS1043A, LS1046A, LS1088A,
LS208xA, LX216xA)
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201130101515.27431-11-biwen.li@oss.nxp.com
Hou Zhiqiang [Mon, 30 Nov 2020 10:15:05 +0000 (18:15 +0800)]
irqchip/ls-extirq: Add LS1043A, LS1088A external interrupt support
Add an new IRQ chip declaration for LS1043A and LS1088A, and cleanup
the use of the "bit_reverse" property, now gated on the Soc type.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201130101515.27431-1-biwen.li@oss.nxp.com
Huacai Chen [Sat, 5 Dec 2020 09:15:44 +0000 (17:15 +0800)]
irqchip/loongson-htpic: Fix build warnings
Fix build warnings as below:
drivers/irqchip/irq-loongson-htpic.c: In function 'htpic_reg_init':
>> drivers/irqchip/irq-loongson-htpic.c:62:12: warning: variable 'val' set but not used [-Wunused-but-set-variable]
62 | uint32_t val;
| ^~~
drivers/irqchip/irq-loongson-htpic.c: At top level:
>> drivers/irqchip/irq-loongson-htpic.c:84:12: warning: no previous prototype for 'htpic_of_init' [-Wmissing-prototypes]
84 | int __init htpic_of_init(struct device_node *node, struct device_node *parent)
| ^~~~~~~~~~~~~
Fixes:
a93f1d903fa34fc2c5d9fa450bd ("irqchip: Add driver for Loongson-3 HyperTransport PIC controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1607159744-995-1-git-send-email-chenhuacai@kernel.org
Geert Uytterhoeven [Wed, 9 Dec 2020 10:15:04 +0000 (11:15 +0100)]
irqchip/gic: Spelling s/REturn/Return/
Fix a capitalization typo.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209101504.2206941-1-geert+renesas@glider.be
Frederic Weisbecker [Wed, 2 Dec 2020 11:57:32 +0000 (12:57 +0100)]
irq: Call tick_irq_enter() inside HARDIRQ_OFFSET
Now that account_hardirq_enter() is called after HARDIRQ_OFFSET has
been incremented, there is nothing left that prevents us from also
moving tick_irq_enter() after HARDIRQ_OFFSET is incremented.
The desired outcome is to remove the nasty hack that prevents softirqs
from being raised through ksoftirqd instead of the hardirq bottom half.
Also tick_irq_enter() then becomes appropriately covered by lockdep.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201202115732.27827-6-frederic@kernel.org
Frederic Weisbecker [Wed, 2 Dec 2020 11:57:31 +0000 (12:57 +0100)]
irqtime: Move irqtime entry accounting after irq offset incrementation
IRQ time entry is currently accounted before HARDIRQ_OFFSET or
SOFTIRQ_OFFSET are incremented. This is convenient to decide to which
index the cputime to account is dispatched.
Unfortunately it prevents tick_irq_enter() from being called under
HARDIRQ_OFFSET because tick_irq_enter() has to be called before the IRQ
entry accounting due to the necessary clock catch up. As a result we
don't benefit from appropriate lockdep coverage on tick_irq_enter().
To prepare for fixing this, move the IRQ entry cputime accounting after
the preempt offset is incremented. This requires the cputime dispatch
code to handle the extra offset.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20201202115732.27827-5-frederic@kernel.org
Frederic Weisbecker [Wed, 2 Dec 2020 11:57:30 +0000 (12:57 +0100)]
sched/vtime: Consolidate IRQ time accounting
The 3 architectures implementing CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
all have their own version of irq time accounting that dispatch the
cputime to the appropriate index: hardirq, softirq, system, idle,
guest... from an all-in-one function.
Instead of having these ad-hoc versions, move the cputime destination
dispatch decision to the core code and leave only the actual per-index
cputime accounting to the architecture.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201202115732.27827-4-frederic@kernel.org
Frederic Weisbecker [Wed, 2 Dec 2020 11:57:29 +0000 (12:57 +0100)]
s390/vtime: Use the generic IRQ entry accounting
s390 has its own version of IRQ entry accounting because it doesn't
account the idle time the same way the other architectures do. Only
the actual idle sleep time is accounted as idle time, the rest of the
idle task execution is accounted as system time.
Make the generic IRQ entry accounting aware of architectures that have
their own way of accounting idle time and convert s390 to use it.
This prepares s390 to get involved in further consolidations of IRQ
time accounting.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201202115732.27827-3-frederic@kernel.org
Frederic Weisbecker [Wed, 2 Dec 2020 11:57:28 +0000 (12:57 +0100)]
sched/cputime: Remove symbol exports from IRQ time accounting
account_irq_enter_time() and account_irq_exit_time() are not called
from modules. EXPORT_SYMBOL_GPL() can be safely removed from the IRQ
cputime accounting functions called from there.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201202115732.27827-2-frederic@kernel.org
Marc Zyngier [Sun, 29 Nov 2020 13:55:51 +0000 (13:55 +0000)]
genirq/irqdomain: Don't try to free an interrupt that has no mapping
When an interrupt allocation fails for N interrupts, it is pretty
common for the error handling code to free the same number of interrupts,
no matter how many interrupts have actually been allocated.
This may result in the domain freeing code to be unexpectedly called
for interrupts that have no mapping in that domain. Things end pretty
badly.
Instead, add some checks to irq_domain_free_irqs_hierarchy() to make sure
that thiss does not follow the hierarchy if no mapping exists for a given
interrupt.
Fixes:
6a6544e520abe ("genirq/irqdomain: Remove auto-recursive hierarchy support")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201129135551.396777-1-maz@kernel.org
Linus Torvalds [Sun, 29 Nov 2020 23:50:50 +0000 (15:50 -0800)]
Linux 5.10-rc6
Linus Torvalds [Sun, 29 Nov 2020 19:19:26 +0000 (11:19 -0800)]
Merge tag 'locking-urgent-2020-11-29' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
Linus Torvalds [Sun, 29 Nov 2020 19:06:57 +0000 (11:06 -0800)]
Merge tag 'irq-urgent-2020-11-29' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixes for irqchip drivers:
- Save and restore the GICV3 ITS state unconditionally on
suspend/resume to handle firmware which fails to do so.
- Use the correct index into the fwspec parameters to read the irq
trigger type in the EXIU chip driver"
* tag 'irq-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Unconditionally save/restore the ITS state on suspend
irqchip/exiu: Fix the index of fwspec for IRQ type
Linus Torvalds [Sun, 29 Nov 2020 18:18:53 +0000 (10:18 -0800)]
Merge tag 'efi-urgent-for-v5.10-rc5' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"More EFI fixes forwarded from Ard Biesheuvel:
- revert efivarfs kmemleak fix again - it was a false positive
- make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does
not pull in other dependencies unnecessarily if CONFIG_EFI is not
set
- defer attempts to load SSDT overrides from EFI vars until after the
efivar layer is up"
* tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: EFI_EARLYCON should depend on EFI
efivarfs: revert "fix memory leak in efivarfs_create()"
efi/efivars: Set generic ops before loading SSDT
Linus Torvalds [Sun, 29 Nov 2020 18:08:17 +0000 (10:08 -0800)]
Merge tag 'x86_urgent_for_v5.10-rc6' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A couple of urgent fixes which accumulated this last week:
- Two resctrl fixes to prevent refcount leaks when manipulating the
resctrl fs (Xiaochen Shen)
- Correct prctl(PR_GET_SPECULATION_CTRL) reporting (Anand K Mistry)
- A fix to not lose already seen MCE severity which determines
whether the machine can recover (Gabriele Paoloni)"
* tag 'x86_urgent_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Do not overwrite no_way_out if mce_end() fails
x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb
x86/resctrl: Add necessary kernfs_put() calls to prevent refcount leak
x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak
Linus Torvalds [Sat, 28 Nov 2020 23:53:30 +0000 (15:53 -0800)]
Merge tag 'riscv-for-linus-5.10-rc6' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I've collected a handful of fixes over the past few weeks:
- A fix to un-break the build-id argument to the vDSO build, which is
necessary for the LLVM linker.
- A fix to initialize the jump label subsystem, without which it (and
all the stuff that uses it) doesn't actually function.
- A fix to include <asm/barrier.h> from <vdso/processor.h>, without
which some drivers won't compile"
* tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: fix barrier() use in <vdso/processor.h>
RISC-V: Add missing jump label initialization
riscv: Explicitly specify the build id style in vDSO Makefile again
Linus Torvalds [Sat, 28 Nov 2020 18:42:30 +0000 (10:42 -0800)]
Merge tag 'kbuild-fixes-v5.10' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused OBJSIZE variable.
- Fix rootless deb-pkg build in a setgid directory.
* tag 'kbuild-fixes-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
builddeb: Fix rootless build in setuid/setgid directory
kbuild: remove unused OBJSIZE
Linus Torvalds [Sat, 28 Nov 2020 18:35:05 +0000 (10:35 -0800)]
Merge tag 'perf-tools-fixes-for-v5.10-2020-11-28' of git://git./linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix die_entrypc() when DW_AT_ranges DWARF attribute not available
- Cope with broken DWARF (missing DW_AT_declaration) generated by some
recent gcc versions
- Do not generate CGROUP metadata events when not asked to in 'perf
record'
- Use proper CPU for shadow stats in 'perf stat'
- Update copy of libbpf's hashmap.c, silencing tools/perf build warning
- Fix return value in 'perf diff'
* tag 'perf-tools-fixes-for-v5.10-2020-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf probe: Change function definition check due to broken DWARF
perf probe: Fix to die_entrypc() returns error correctly
perf stat: Use proper cpu for shadow stats
perf record: Synthesize cgroup events only if needed
perf diff: Fix error return value in __cmd_diff()
perf tools: Update copy of libbpf's hashmap.c
Linus Torvalds [Sat, 28 Nov 2020 18:09:38 +0000 (10:09 -0800)]
Merge tag 'usb-5.10-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB / PHY driver fixes from Greg KH:
"Here are a few small USB and PHY driver fixes for 5.10-rc6. They
include:
- small PHY driver fixes to resolve reported issues
- USB quirks added for "broken" devices
- typec fixes for reported problems
- USB gadget fixes for small issues
Full details are in the shortlog, nothing major in here and all have
been in linux-next with no reported issues"
* tag 'usb-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
USB: core: Change %pK for __user pointers to %px
USB: core: Fix regression in Hercules audio card
usb: gadget: Fix memleak in gadgetfs_fill_super
usb: gadget: f_midi: Fix memleak in f_midi_alloc
USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO built-in usb-audio card
usb: typec: qcom-pmic-typec: fix builtin build errors
phy: mediatek: fix spelling mistake in Kconfig "veriosn" -> "version"
phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependency
phy: qualcomm: usb: Fix SuperSpeed PHY OF dependency
phy: intel: PHY_INTEL_KEEMBAY_EMMC should depend on ARCH_KEEMBAY
usb: cdns3: gadget: calculate TD_SIZE based on TD
usb: cdns3: gadget: initialize link_trb as NULL
phy: cpcap-usb: Use IRQF_ONESHOT
phy: qcom-qmp: Initialize another pointer to NULL
phy: tegra: xusb: Fix dangling pointer on probe failure
phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211
Linus Torvalds [Sat, 28 Nov 2020 18:04:36 +0000 (10:04 -0800)]
Merge tag 'char-misc-5.10-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small misc driver fixes for 5.10-rc6. They include:
- interconnect fixes for reported problems
- habanalabs bugfix for found issue when doing the switch fallthrough
patches
- MAINTAINERS file update for coresight reviewers/maintainers
All have been in linux-next with no reported issues"
* tag 'char-misc-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Adding help for coresight subsystem
habanalabs/gaudi: fix missing code in ECC handling
interconnect: fix memory trashing in of_count_icc_providers()
interconnect: qcom: qcs404: Remove GPU and display RPM IDs
interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes
interconnect: qcom: msm8974: Don't boost the NoC rate during boot
interconnect: qcom: msm8974: Prevent integer overflow in rate
Linus Torvalds [Fri, 27 Nov 2020 23:00:35 +0000 (15:00 -0800)]
Merge tag 'asm-generic-fixes-5.10-2' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures"
* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Linus Torvalds [Fri, 27 Nov 2020 22:48:03 +0000 (14:48 -0800)]
Merge tag 'arm-soc-fixes-v5.10-3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
Linus Torvalds [Fri, 27 Nov 2020 22:38:02 +0000 (14:38 -0800)]
Merge tag 'net-5.10-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
and CAN subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection of
congestion control
- tcp: fix race condition when creating child sockets from syncookies
on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible hard
header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing struct
slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats uAPI
before it's released"
* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
ch_ktls: lock is not freed
net/tls: Protect from calling tls_dev_del for TLS RX twice
devlink: Make sure devlink instance and port are in same net namespace
devlink: Hold rtnl lock while reading netdev attributes
ptp: clockmatrix: bug fix for idtcm_strverscmp
enetc: Let the hardware auto-advance the taprio base-time of 0
gro_cells: reduce number of synchronize_net() calls
net: stmmac: fix incorrect merge of patch upstream
ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
Documentation: netdev-FAQ: suggest how to post co-dependent series
ibmvnic: enhance resetting status check during module exit
...
Linus Torvalds [Fri, 27 Nov 2020 22:06:23 +0000 (14:06 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes in the UFS driver: two are for power management
issues and the third is to fix a slew of problem in the sysfs code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Fix race between shutdown and runtime resume flow
scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE
scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()
Linus Torvalds [Fri, 27 Nov 2020 20:56:04 +0000 (12:56 -0800)]
Merge tag 'io_uring-5.10-2020-11-27' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Out of bounds fix for the cq size cap from earlier this release (Joseph)
- iov_iter type check fix (Pavel)
- Files grab + cancelation fix (Pavel)
* tag 'io_uring-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
io_uring: fix files grab/cancel race
io_uring: fix ITER_BVEC check
io_uring: fix shift-out-of-bounds when round up cq size
Linus Torvalds [Fri, 27 Nov 2020 20:49:01 +0000 (12:49 -0800)]
Merge tag 'block-5.10-2020-11-27' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single fix, for a crash in the keyslot manager"
* tag 'block-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
block/keyslot-manager: prevent crash when num_slots=1
Linus Torvalds [Fri, 27 Nov 2020 20:42:13 +0000 (12:42 -0800)]
Merge tag 'for-5.10-rc5-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few fixes for various warnings that accumulated over past two weeks:
- tree-checker: add missing return values for some errors
- lockdep fixes
- when reading qgroup config and starting quota rescan
- reverse order of quota ioctl lock and VFS freeze lock
- avoid accessing potentially stale fs info during device scan,
reported by syzbot
- add scope NOFS protection around qgroup relation changes
- check for running transaction before flushing qgroups
- fix tracking of new delalloc ranges for some cases"
* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep splat when enabling and disabling qgroups
btrfs: do nofs allocations when adding and removing qgroup relations
btrfs: fix lockdep splat when reading qgroup config on mount
btrfs: tree-checker: add missing returns after data_ref alignment checks
btrfs: don't access possibly stale fs_info data for printing duplicate device
btrfs: tree-checker: add missing return after error in root_item
btrfs: qgroup: don't commit transaction when we already hold the handle
btrfs: fix missing delalloc new bit for new delalloc ranges
Linus Torvalds [Fri, 27 Nov 2020 20:31:04 +0000 (12:31 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Two security issues and several small bug fixes. Things seem to have
stabilized for this release here.
Summary:
- Significant out of bounds access security issue in i40iw
- Fix misuse of mmu notifiers in hfi1
- Several errors in the register map/usage in hns
- Missing error returns in mthca"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Bugfix for memory window mtpt configuration
RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP
RDMA/hns: Fix wrong field of SRQ number the device supports
IB/hfi1: Ensure correct mm is used at all times
RDMA/i40iw: Address an mmap handler exploit in i40iw
IB/mthca: fix return value of error branch in mthca_init_cq()
Linus Torvalds [Fri, 27 Nov 2020 20:03:07 +0000 (12:03 -0800)]
Merge tag 'mtd/fixes-for-5.10-rc6' of git://git./linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Because of a recent change in the core, NAND controller drivers
initializing the ECC engine too early in the probe path are broken.
Drivers should wait for the NAND device to be discovered and its
memory layout known before doing any ECC related initialization, so
instead of reverting the faulty change which is actually moving in the
right direction, let's fix the drivers directly: socrates, sharpsl,
r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc,
lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta,
xway and gpio"
* tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()
mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()
mtd: rawnand: r852: Move the ECC initialization to ->attach_chip()
mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()
mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()
mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip()
mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()
mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip()
mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip()
mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()
mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()
mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()
mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()
mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()
Linus Torvalds [Fri, 27 Nov 2020 19:29:53 +0000 (11:29 -0800)]
Merge tag 'spi-fix-v5.10-rc5' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes for v5.10, one for the core which fixes some potential
races for controllers with multiple chip selects when configuration of
the chip select for one client device races with the addition and
initial setup of an additional client"
* tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dw: Fix spi registration for controllers overriding CS
spi: imx: fix the unbalanced spi runtime pm management
spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts
spi: Take the SPI IO-mutex in the spi_setup() method
Linus Torvalds [Fri, 27 Nov 2020 19:25:23 +0000 (11:25 -0800)]
Merge tag 'media/v5.10-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull virtual digital TV driver fixes from Mauro Carvalho Chehab:
"A series of fixes for the new virtual digital TV driver (vidtv), which
is meant to help doing tests with the digital TV core and media
userspace apps and libraries.
They cover a series of issues I found on it, together with a few new
things in order to make it easier to detect problems at the DVB core"
* tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (36 commits)
media: vidtv.rst: add kernel-doc markups
media: vidtv.rst: update vidtv documentation
media: vidtv: simplify EIT write function
media: vidtv: simplify NIT write function
media: vidtv: simplify SDT write function
media: vidtv: cleanup PMT write table function
media: vidtv: cleanup PAT write function
media: vidtv: cleanup PSI table header function
media: vidtv: cleanup PSI descriptor write function
media: vidtv: simplify the crc writing logic
media: vidtv: simplify PSI write function
media: vidtv: add date to the current event
media: vidtv: fix service_id at SDT table
media: vidtv: fix service type
media: vidtv: add a PID entry for the NIT table
media: vidtv: properly fill EIT service_id
media: vidtv: fix the network ID range
media: vidtv: improve EIT data
media: vidtv: cleanup null packet initialization logic
media: vidtv: pre-initialize mux arrays
...
Linus Torvalds [Fri, 27 Nov 2020 19:19:49 +0000 (11:19 -0800)]
Merge tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Unfortunately this has a bit of thanksgiving stuffing in it, as it a
bit larger (at least the vc4 patches) than I like at this point in
time.
The main thing is it has a bunch of regressions fixes for reports in
the last couple of weeks, ast, nouveau and the amdgpu ttm init fix,
along with the usual selection of amdgpu and i915 fixes.
The vc4 fixes are a few but they are fixes and the nastiest one is a
fix for when you have a 2.4Ghz Wifi and a HDMI signal with a clock in
that range and there isn't enough shielding and interference happen
between the two, the fix adjusts the mode clock to try and avoid the
wifi channels in that case.
Hopefully you can merge this between turkey slices, and next week
should be quieter.
ast:
- LUT loading regression fix
nouveau:
- relocations regression fix
amdgpu:
- ttm init oops fix
- Runtime pm fix
- SI UVD suspend/resume fix
- HDCP fix for headless cards
- Sienna Cichlid golden register update
i915:
- Fix Perf/OA workaround register corruption (Lionel)
- Correct a comment statement in GVT (Yan)
- Fix GT enable/disable iterrupts, including a race condition that
prevented GPU to go idle (Chris)
- Free stale request on destroying the virtual engine (Chris)
exynos:
- config dependency fix
mediatek:
- unused var removal
- horizonal front/back porch formula fix
vc4:
- wifi and hdmi interference fix
- mode rejection fixes
- use after free fix
- cleanup some code"
* tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/nouveau: fix relocations applying logic and a double-free
drm/ast: Reload gamma LUT after changing primary plane's color format
drm/amdgpu: Fix size calculation when init onchip memory
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/display: Avoid HDCP initialization in devices without output
drm/i915/gt: Free stale request on destroying the virtual engine
drm/i915/gt: Don't cancel the interrupt shadow too early
drm/i915/gt: Track signaled breadcrumbs outside of the breadcrumb spinlock
drm/amdgpu: fix a page fault
drm/amdgpu: fix SI UVD firmware validate resume fail
drm/amd/amdgpu: fix null pointer in runtime pm
drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission
drm/i915/gvt: correct a false comment of flag F_UNALIGN
drm/i915/perf: workaround register corruption in OATAILPTR
drm/vc4: kms: Don't disable the muxing of an active CRTC
drm/vc4: kms: Store the unassigned channel list in the state
drm/exynos: depend on COMMON_CLK to fix compile tests
drm/mediatek: dsi: Modify horizontal front/back porch byte formula
drm/vc4: hdmi: Disable Wifi Frequencies
dt-bindings: display: Add a property to deal with WiFi coexistence
...
Jakub Kicinski [Fri, 27 Nov 2020 19:13:39 +0000 (11:13 -0800)]
Merge tag 'linux-can-fixes-for-5.10-
20201127' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-27
The first patch is by me and target the gs_usb driver and fixes the endianess
problem with candleLight firmware.
Another patch by me for the mcp251xfd driver add sanity checking to bail out if
no IRQ is configured.
The next three patches target the m_can driver. A patch by me removes the
hardcoded IRQF_TRIGGER_FALLING from the request_threaded_irq() as this clashes
with the trigger level specified in the DT. Further a patch by me fixes the
nominal bitiming tseg2 min value for modern m_can cores. Pankaj Sharma's patch
add support for cores version 3.3.x.
The last patch by Oliver Hartkopp is for af_can and converts a WARN() into a
pr_warn(), which is triggered by the syzkaller. It was able to create a
situation where the closing of a socket runs simultaneously to the notifier
call chain for removing the CAN network device in use.
* tag 'linux-can-fixes-for-5.10-
20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
====================
Link: https://lore.kernel.org/r/20201127100301.512603-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 19:09:13 +0000 (11:09 -0800)]
Merge tag 'platform-drivers-x86-v5.10-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi fixes: two bug-fixes and three model specific quirks
- fixes for misc other drivers: two bug-fixes and three model specific
quirks
* tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet
platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet
platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
platform/x86: toshiba_acpi: Fix the wrong variable assignment
platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan control
platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time
platform/x86: thinkpad_acpi: Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
platform/x86: thinkpad_acpi: Do not report SW_TABLET_MODE on Yoga 11e
platform/x86: thinkpad_acpi: add P1 gen3 second fan support
Willem de Bruijn [Thu, 26 Nov 2020 15:12:20 +0000 (10:12 -0500)]
sock: set sk_err to ee_errno on dequeue from errq
When setting sk_err, set it to ee_errno, not ee_origin.
Commit
f5f99309fa74 ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):
- sk->sk_err = err;
Commit
38b257938ac6 ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:
+ if (icmp_next)
+ sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;
But read from ee_errno.
Fixes:
38b257938ac6 ("sock: reset sk_err when the error queue is empty")
Reported-by: Ayush Ranjan <ayushranjan@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Thu, 26 Nov 2020 14:17:53 +0000 (15:17 +0100)]
mptcp: fix NULL ptr dereference on bad MPJ
If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.
Since commit
4cf8b7e48a09 ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.
Address the issue doing the hmac validation earlier.
Fixes:
4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 19:04:13 +0000 (11:04 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
S390:
- do not reset the global diag318 data for per-cpu reset
- do not mark memory as protected too early
- fix for destroy page ultravisor call
x86:
- fix for SEV debugging
- fix incorrect return code
- fix for 'noapic' with PIC in userspace and LAPIC in kernel
- fix for 5-level paging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
MAINTAINERS: Update email address for Sean Christopherson
MAINTAINERS: add uv.c also to KVM/s390
s390/uv: handle destroy page legacy interface
KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace
KVM: SVM: fix error return code in svm_create_vcpu()
KVM: SVM: Fix offset computation bug in __sev_dbg_decrypt().
KVM: arm64: Correctly align nVHE percpu data
KVM: s390: remove diag318 reset code
KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup
Eelco Chaudron [Tue, 24 Nov 2020 12:34:44 +0000 (07:34 -0500)]
net: openvswitch: fix TTL decrement action netlink message format
Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.
When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.
Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.
Fixes:
744676e77720 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 18:59:02 +0000 (10:59 -0800)]
Merge tag 'powerpc-5.10-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.10:
- regression fix for a boot failure on some 32-bit machines.
- fix for host crashes in the KVM system reset handling.
- fix for a possible oops in the KVM XIVE interrupt handling on
Power9.
- fix for host crashes triggerable via the KVM emulated MMIO handling
when running HPT guests.
- a couple of small build fixes.
Thanks to Andreas Schwab, Cédric Le Goater, Christophe Leroy, Erhard
Furtner, Greg Kurz, Greg Kurz, Németh Márton, Nicholas Piggin, Nick
Desaulniers, Serge Belyshev, and Stephen Rothwell"
* tag 'powerpc-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix allnoconfig build since uaccess flush
powerpc/64s/exception: KVM Fix for host DSI being taken in HPT guest MMU context
powerpc: Drop -me200 addition to build flags
KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB page
powerpc/64s: Fix KVM system reset handling when CONFIG_PPC_PSERIES=y
powerpc/32s: Use relocation offset when setting early hash table
Linus Torvalds [Fri, 27 Nov 2020 18:44:59 +0000 (10:44 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are relating to our handling of access/dirty bits,
where our low-level page-table helpers could lead to stale young
mappings and loss of the dirty bit in some cases (the latter has not
been observed in practice, but could happen when clearing "soft-dirty"
if we enabled that). These were posted as part of a larger series, but
the rest of that is less urgent and needs a v2 which I'll get to
shortly.
In other news, we've now got a set of fixes to resolve the
lockdep/tracing problems that have been plaguing us for a while, but
they're still a bit "fresh" and I plan to send them to you next week
after we've got some more confidence in them (although initial CI
results look good).
Summary:
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
Linus Torvalds [Fri, 27 Nov 2020 18:41:19 +0000 (10:41 -0800)]
Merge tag 'iommu-fixes' of git://git./linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Here's another round of IOMMU fixes for -rc6 consisting mainly of a
bunch of independent driver fixes. Thomas agreed for me to take the
x86 'tboot' fix here, as it fixes a regression introduced by a vt-d
change.
- Fix intel iommu driver when running on devices without VCCAP_REG
- Fix swiotlb and "iommu=pt" interaction under TXT (tboot)
- Fix missing return value check during device probe()
- Fix probe ordering for Qualcomm SMMU implementation
- Ensure page-sized mappings are used for AMD IOMMU buffers with SNP
RMP"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/vt-d: Don't read VCCAP register unless it exists
x86/tboot: Don't disable swiotlb when iommu is forced on
iommu: Check return of __iommu_attach_device()
arm-smmu-qcom: Ensure the qcom_scm driver has finished probing
iommu/amd: Enforce 4k mapping for certain IOMMU data structures
Linus Torvalds [Fri, 27 Nov 2020 18:38:36 +0000 (10:38 -0800)]
Merge tag 'printk-for-5.10-rc6-fixup' of git://git./linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
Linus Torvalds [Fri, 27 Nov 2020 18:36:38 +0000 (10:36 -0800)]
Merge tag 'writeback_for_v5.10-rc6' of git://git./linux/kernel/git/jack/linux-fs
Pull writeback fix from Jan Kara:
"A fix of possible missing string termination in writeback tracepoints"
* tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
trace: fix potenial dangerous pointer
Masami Hiramatsu [Fri, 27 Nov 2020 05:48:55 +0000 (14:48 +0900)]
perf probe: Change function definition check due to broken DWARF
Since some gcc generates a broken DWARF which lacks DW_AT_declaration
attribute from the subprogram DIE of function prototype.
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97060)
So, in addition to the DW_AT_declaration check, we also check the
subprogram DIE has DW_AT_inline or actual entry pc.
Committer testing:
# cat /etc/fedora-release
Fedora release 33 (Thirty Three)
#
Before:
# perf test vfs_getname
78: Use vfs_getname probe to get syscall args filenames : FAILED!
79: Check open filename arg using perf trace + vfs_getname : FAILED!
81: Add vfs_getname probe to get syscall args filenames : FAILED!
#
After:
# perf test vfs_getname
78: Use vfs_getname probe to get syscall args filenames : Ok
79: Check open filename arg using perf trace + vfs_getname : Ok
81: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: http://lore.kernel.org/lkml/160645613571.2824037.7441351537890235895.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 27 Nov 2020 05:48:46 +0000 (14:48 +0900)]
perf probe: Fix to die_entrypc() returns error correctly
Fix die_entrypc() to return error correctly if the DIE has no
DW_AT_ranges attribute. Since dwarf_ranges() will treat the case as an
empty ranges and return 0, we have to check it by ourselves.
Fixes:
91e2f539eeda ("perf probe: Fix to show function entry line as probe-able")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/160645612634.2824037.5284932731175079426.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 27 Nov 2020 04:14:03 +0000 (13:14 +0900)]
perf stat: Use proper cpu for shadow stats
Currently perf stat shows some metrics (like IPC) for defined events.
But when no aggregation mode is used (-A option), it shows incorrect
values since it used a value from a different cpu.
Before:
$ perf stat -aA -e cycles,instructions sleep 1
Performance counter stats for 'system wide':
CPU0 116,057,380 cycles
CPU1 86,084,722 cycles
CPU2 99,423,125 cycles
CPU3 98,272,994 cycles
CPU0 53,369,217 instructions # 0.46 insn per cycle
CPU1 33,378,058 instructions # 0.29 insn per cycle
CPU2 58,150,086 instructions # 0.50 insn per cycle
CPU3 40,029,703 instructions # 0.34 insn per cycle
1.
001816971 seconds time elapsed
So the IPC for CPU1 should be 0.38 (= 33,378,058 / 86,084,722)
but it was 0.29 (= 33,378,058 / 116,057,380) and so on.
After:
$ perf stat -aA -e cycles,instructions sleep 1
Performance counter stats for 'system wide':
CPU0 109,621,384 cycles
CPU1 159,026,454 cycles
CPU2 99,460,366 cycles
CPU3 124,144,142 cycles
CPU0 44,396,706 instructions # 0.41 insn per cycle
CPU1 120,195,425 instructions # 0.76 insn per cycle
CPU2 44,763,978 instructions # 0.45 insn per cycle
CPU3 69,049,079 instructions # 0.56 insn per cycle
1.
001910444 seconds time elapsed
Fixes:
44d49a600259 ("perf stat: Support metrics in --per-core/socket mode")
Reported-by: Sam Xi <xyzsam@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201127041404.390276-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 27 Nov 2020 05:43:56 +0000 (14:43 +0900)]
perf record: Synthesize cgroup events only if needed
It didn't check the tool->cgroup_events bit which is set when the
--all-cgroups option is given. Without it, samples will not have cgroup
info so no reason to synthesize.
We can check the PERF_RECORD_CGROUP records after running perf record
*WITHOUT* the --all-cgroups option:
Before:
$ perf report -D | grep CGROUP
0 0 0x8430 [0x38]: PERF_RECORD_CGROUP cgroup: 1 /
CGROUP events: 1
CGROUP events: 0
CGROUP events: 0
After:
$ perf report -D | grep CGROUP
CGROUP events: 0
CGROUP events: 0
CGROUP events: 0
Committer testing:
Before:
# perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data (10003 samples) ]
# perf report -D | grep "CGROUP events"
CGROUP events: 146
CGROUP events: 0
CGROUP events: 0
#
After:
# perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data (10448 samples) ]
# perf report -D | grep "CGROUP events"
CGROUP events: 0
CGROUP events: 0
CGROUP events: 0
#
With all-cgroups:
# perf record --all-cgroups -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.374 MB perf.data (11526 samples) ]
# perf report -D | grep "CGROUP events"
CGROUP events: 146
CGROUP events: 0
CGROUP events: 0
#
Fixes:
8fb4b67939e16 ("perf record: Add --all-cgroups option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201127054356.405481-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Zhen Lei [Tue, 24 Nov 2020 10:36:52 +0000 (18:36 +0800)]
perf diff: Fix error return value in __cmd_diff()
An appropriate return value should be set on the failed path.
Fixes:
2a09a84c720b436a ("perf diff: Support hot streams comparison")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201124103652.438-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 18 Nov 2020 11:32:33 +0000 (08:32 -0300)]
perf tools: Update copy of libbpf's hashmap.c
To pick the changes in:
7a078d2d18801bba ("libbpf, hashmap: Fix undefined behavior in hash_bits")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnd Bergmann [Fri, 27 Nov 2020 16:45:45 +0000 (17:45 +0100)]
Merge tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Add writeback to valid OP-TEE shared memory types
Allows OP-TEE to work with ARMv7 based single CPU systems by allowing
writeback cache policy for shared memory.
* tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add writeback to valid memory type
Link: https://lore.kernel.org/r/20201125120134.GA1642471@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Gabriele Paoloni [Fri, 27 Nov 2020 16:18:15 +0000 (16:18 +0000)]
x86/mce: Do not overwrite no_way_out if mce_end() fails
Currently, if mce_end() fails, no_way_out - the variable denoting
whether the machine can recover from this MCE - is determined by whether
the worst severity that was found across the MCA banks associated with
the current CPU, is of panic severity.
However, at this point no_way_out could have been already set by
mca_start() after looking at all severities of all CPUs that entered the
MCE handler. If mce_end() fails, check first if no_way_out is already
set and, if so, stick to it, otherwise use the local worst value.
[ bp: Massage. ]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201127161819.3106432-2-gabriele.paoloni@intel.com
Vitaly Kuznetsov [Thu, 26 Nov 2020 11:02:06 +0000 (12:02 +0100)]
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
Commit
95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") caused
the following WARNING on an Intel Ice Lake CPU:
get_mmio_spte: detect reserved bits on spte, addr 0xb80a0, dump hierarchy:
------ spte 0xb80a0 level 5.
------ spte 0xfcd210107 level 4.
------ spte 0x1004c40107 level 3.
------ spte 0x1004c41107 level 2.
------ spte 0x1db00000000b83b6 level 1.
WARNING: CPU: 109 PID: 10254 at arch/x86/kvm/mmu/mmu.c:3569 kvm_mmu_page_fault.cold.150+0x54/0x22f [kvm]
...
Call Trace:
? kvm_io_bus_get_first_dev+0x55/0x110 [kvm]
vcpu_enter_guest+0xaa1/0x16a0 [kvm]
? vmx_get_cs_db_l_bits+0x17/0x30 [kvm_intel]
? skip_emulated_instruction+0xaa/0x150 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xca/0x520 [kvm]
The guest triggering this crashes. Note, this happens with the traditional
MMU and EPT enabled, not with the newly introduced TDP MMU. Turns out,
there was a subtle change in the above mentioned commit. Previously,
walk_shadow_page_get_mmio_spte() was setting 'root' to 'iterator.level'
which is returned by shadow_walk_init() and this equals to
'vcpu->arch.mmu->shadow_root_level'. Now, get_mmio_spte() sets it to
'int root = vcpu->arch.mmu->root_level'.
The difference between 'root_level' and 'shadow_root_level' on CPUs
supporting 5-level page tables is that in some case we don't want to
use 5-level, in particular when 'cpuid_maxphyaddr(vcpu) <= 48'
kvm_mmu_get_tdp_level() returns '4'. In case upper layer is not used,
the corresponding SPTE will fail '__is_rsvd_bits_set()' check.
Revert to using 'shadow_root_level'.
Fixes:
95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20201126110206.2118959-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 27 Nov 2020 08:18:20 +0000 (09:18 +0100)]
KVM: x86: Fix split-irqchip vs interrupt injection window request
kvm_cpu_accept_dm_intr and kvm_vcpu_ready_for_interrupt_injection are
a hodge-podge of conditions, hacked together to get something that
more or less works. But what is actually needed is much simpler;
in both cases the fundamental question is, do we have a place to stash
an interrupt if userspace does KVM_INTERRUPT?
In userspace irqchip mode, that is !vcpu->arch.interrupt.injected.
Currently kvm_event_needs_reinjection(vcpu) covers it, but it is
unnecessarily restrictive.
In split irqchip mode it's a bit more complicated, we need to check
kvm_apic_accept_pic_intr(vcpu) (the IRQ window exit is basically an INTACK
cycle and thus requires ExtINTs not to be masked) as well as
!pending_userspace_extint(vcpu). However, there is no need to
check kvm_event_needs_reinjection(vcpu), since split irqchip keeps
pending ExtINT state separate from event injection state, and checking
kvm_cpu_has_interrupt(vcpu) is wrong too since ExtINT has higher
priority than APIC interrupts. In fact the latter fixes a bug:
when userspace requests an IRQ window vmexit, an interrupt in the
local APIC can cause kvm_cpu_has_interrupt() to be true and thus
kvm_vcpu_ready_for_interrupt_injection() to return false. When this
happens, vcpu_run does not exit to userspace but the interrupt window
vmexits keep occurring. The VM loops without any hope of making progress.
Once we try to fix these with something like
return kvm_arch_interrupt_allowed(vcpu) &&
- !kvm_cpu_has_interrupt(vcpu) &&
- !kvm_event_needs_reinjection(vcpu) &&
- kvm_cpu_accept_dm_intr(vcpu);
+ (!lapic_in_kernel(vcpu)
+ ? !vcpu->arch.interrupt.injected
+ : (kvm_apic_accept_pic_intr(vcpu)
+ && !pending_userspace_extint(v)));
we realize two things. First, thanks to the previous patch the complex
conditional can reuse !kvm_cpu_has_extint(vcpu). Second, the interrupt
window request in vcpu_enter_guest()
bool req_int_win =
dm_request_for_irq_injection(vcpu) &&
kvm_cpu_accept_dm_intr(vcpu);
should be kept in sync with kvm_vcpu_ready_for_interrupt_injection():
it is unnecessary to ask the processor for an interrupt window
if we would not be able to return to userspace. Therefore,
kvm_cpu_accept_dm_intr(vcpu) is basically !kvm_cpu_has_extint(vcpu)
ANDed with the existing check for masked ExtINT. It all makes sense:
- we can accept an interrupt from userspace if there is a place
to stash it (and, for irqchip split, ExtINTs are not masked).
Interrupts from userspace _can_ be accepted even if right now
EFLAGS.IF=0.
- in order to tell userspace we will inject its interrupt ("IRQ
window open" i.e. kvm_vcpu_ready_for_interrupt_injection), both
KVM and the vCPU need to be ready to accept the interrupt.
... and this is what the patch implements.
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Analyzed-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Paolo Bonzini [Fri, 27 Nov 2020 07:53:52 +0000 (08:53 +0100)]
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
Centralize handling of interrupts from the userspace APIC
in kvm_cpu_has_extint and kvm_cpu_get_extint, since
userspace APIC interrupts are handled more or less the
same as ExtINTs are with split irqchip. This removes
duplicated code from kvm_cpu_has_injectable_intr and
kvm_cpu_has_interrupt, and makes the code more similar
between kvm_cpu_has_{extint,interrupt} on one side
and kvm_cpu_get_{extint,interrupt} on the other.
Cc: stable@vger.kernel.org
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 27 Nov 2020 14:17:13 +0000 (09:17 -0500)]
Merge tag 'kvmarm-fixes-5.10-4' of git://git./linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for v5.10, take #4
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
Amelie Delaunay [Fri, 27 Nov 2020 13:17:35 +0000 (14:17 +0100)]
usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
Device tree property is named typec-power-opmode, not power-opmode.
Fixes:
da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201127131735.28280-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Mladek [Fri, 27 Nov 2020 12:41:23 +0000 (13:41 +0100)]
Merge branch 'for-5.10-pr_cont-fixup' into for-linus
Arnd Bergmann [Fri, 27 Nov 2020 12:18:40 +0000 (13:18 +0100)]
Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
John Ogness [Thu, 26 Nov 2020 11:48:36 +0000 (12:54 +0106)]
printk: finalize records with trailing newlines
Any record with a trailing newline (LOG_NEWLINE flag) cannot
be continued because the newline has been stripped and will
not be visible if the message is appended. This was already
handled correctly when committing in log_output() but was
not handled correctly when committing in log_store().
Fixes:
f5f022e53b87 ("printk: reimplement log_cont using record extension")
Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Oliver Hartkopp [Thu, 26 Nov 2020 19:21:40 +0000 (20:21 +0100)]
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
To detect potential bugs in CAN protocol implementations (double removal of
receiver entries) a WARN() statement has been used if no matching list item was
found for removal.
The fault injection issued by syzkaller was able to create a situation where
the closing of a socket runs simultaneously to the notifier call chain for
removing the CAN network device in use.
This case is very unlikely in real life but it doesn't break anything.
Therefore we just replace the WARN() statement with pr_warn() to preserve the
notification for the CAN protocol development.
Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com
Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com
Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>