btrfs: dump extra info if one free space cache has more bitmaps than it should

[ Upstream commit 62cd9d4474282a1eb84f945955c56cbfc42e1ffe ]

There is an internal report on hitting the following ASSERT() in
recalculate_thresholds():

  ASSERT(ctl->total_bitmaps <= max_bitmaps);

Above @max_bitmaps is calculated using the following variables:

- bytes_per_bg
  8 * 4096 * 4096 (128M) for x86_64/x86.

- block_group->length
  The length of the block group.

@max_bitmaps is the rounded up value of block_group->length / 128M.

Normally one free space cache should not have more bitmaps than above
value, but when it happens the ASSERT() can be triggered if
CONFIG_BTRFS_ASSERT is also enabled.

But the ASSERT() itself won't provide enough info to know which is going
wrong.
Is the bg too small thus it only allows one bitmap?
Or is there something else wrong?

So although I haven't found extra reports or crash dump to do further
investigation, add the extra info to make it more helpful to debug.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply

[ Upstream commit 6effe295e1a87408033c29dbcea9d5a5c8b937d5 ]

This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT

[ Upstream commit 5c152c2f66f9368394b89ac90dc7483476ef7b88 ]

When arm64 signal context data overflows the base struct sigcontext it gets
placed in an extra buffer pointed to by a record of type EXTRA_CONTEXT in
the base struct sigcontext which is required to be the last record in the
base struct sigframe. The current validation code attempts to check this
by using GET_RESV_NEXT_HEAD() to step forward from the current record to
the next but that is a macro which assumes it is being provided with a
struct _aarch64_ctx and uses the size there to skip forward to the next
record. Instead validate_extra_context() passes it a struct extra_context
which has a separate size field. This compiles but results in us trying
to validate a termination record in completely the wrong place, at best
failing validation and at worst just segfaulting. Fix this by passing
the struct _aarch64_ctx we meant to into the macro.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6sx: add missing properties for sram

[ Upstream commit 415432c008b2bce8138841356ba444631cabaa50 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6sll: add missing properties for sram

[ Upstream commit 7492a83ed9b7a151e2dd11d64b06da7a7f0fa7f9 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6sl: add missing properties for sram

[ Upstream commit 60c9213a1d9941a8b33db570796c3f9be8984974 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qp: add missing properties for sram

[ Upstream commit 088fe5237435ee2f7ed4450519b2ef58b94c832f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property
sram@940000: '#size-cells' is a required property
sram@940000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6dl: add missing properties for sram

[ Upstream commit f5848b95633d598bacf0500e0108dc5961af88c0 ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6q: add missing properties for sram

[ Upstream commit b11d083c5dcec7c42fe982c854706d404ddd3a5f ]

All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7d-sdb: config the max pressure for tsc2046

[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]

Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,

[17:19:39.183] event1  - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1  - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1  - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1  - not using input device '/dev/input/event1'

This will then cause the APP weston-touch-calibrator can't list touch devices.

root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.

And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Remove interface for periodic interrupt 1

[ Upstream commit 97d8d6f075bd8f988589be02b91f6fa644d0b0b8 ]

[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.

[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.

Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/dp: Don't rewrite link config when setting phy test pattern

[ Upstream commit 7b4d8db657192066bc6f1f6635d348413dac1e18 ]

The sequence for Source DP PHY CTS automation is [2][1]:
1- Emulate successful Link Training(LT)
2- Short HPD and change link rates and number of lanes by LT.
(This is same flow for Link Layer CTS)
3- Short HPD and change PHY test pattern and swing/pre-emphasis
levels (This step should not trigger LT)

The problem is with DP PHY compliance setup as follow:

     [DPTX + on board LTTPR]------Main Link--->[Scope]
                    ^                         |
|                         |
|                         |
----------Aux Ch------>[Aux Emulator]

At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET
to declare the pattern/swing requested by scope, we write link
config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR.
As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes
indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3],
and LTTPR will reset the link and stop sending DP signals to
DPTX/Scope causing the measurements to fail. Note that step 3 will
not trigger LT and DP link will never recovered by the
Aux Emulator/Scope.

The reset of link can be tested with a monitor connected to LTTPR
port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow

  igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2

OR

  printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc
  seek=$((0x100))

This single aux write causes the screen to blank, sending short HPD to
DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT.

As stated in [1]:
"Before any TX electrical testing can be performed, the link between a
DPTX and DPRX (in this case, a piece of test equipment), including all
LTTPRs within the path, shall be trained as defined in this Standard."

In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the
same link rate and lane count applied on step 2, so no need to redo LT.

The fix is to not rewrite link config in step 3, and just writes
TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET

[1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance

[2]: Configuring UnigrafDPTC Controller - Automation Test Sequence
https://www.keysight.com/us/en/assets/9922-01244/help-files/
D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Or Cochvi <or.cochvi@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916054900.415804-1-khaled.almahallawy@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-msm: add compatible string check for sdm670

[ Upstream commit 4de95950d970c71a9e82a24573bb7a44fd95baa1 ]

The Snapdragon 670 has the same quirk as Snapdragon 845 (needing to
restore the dll config). Add a compatible string check to detect the need
for this.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923014322.33620-3-mailingradian@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: explicitly remove aggregate driver at module unload time

[ Upstream commit 8616f2a0589a80e08434212324250eb22f6a66ce ]

Because component_master_del wasn't being called when unloading the
meson_drm module, the aggregate device would linger forever in the global
aggregate_devices list. That means when unloading and reloading the
meson_dw_hdmi module, component_add would call into
try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate
device.

This would in turn dereference some of the aggregate_device's struct
entries which point to memory automatically freed by the devres API when
unbinding the aggregate device from meson_drv_unbind, and trigger an
use-after-free bug:

[  +0.000014] =============================================================
[  +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500
[  +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536
[  +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G         C O      5.19.0-rc6-lrmbkasan+ #1
[  +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT)
[  +0.000008] Call trace:
[  +0.000005]  dump_backtrace+0x1ec/0x280
[  +0.000011]  show_stack+0x24/0x80
[  +0.000007]  dump_stack_lvl+0x98/0xd4
[  +0.000010]  print_address_description.constprop.0+0x80/0x520
[  +0.000011]  print_report+0x128/0x260
[  +0.000007]  kasan_report+0xb8/0xfc
[  +0.000007]  __asan_report_load8_noabort+0x3c/0x50
[  +0.000009]  find_components+0x468/0x500
[  +0.000008]  try_to_bring_up_aggregate_device+0x64/0x390
[  +0.000009]  __component_add+0x1dc/0x49c
[  +0.000009]  component_add+0x20/0x30
[  +0.000008]  meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi]
[  +0.000013]  platform_probe+0xd0/0x220
[  +0.000008]  really_probe+0x3ac/0xa80
[  +0.000008]  __driver_probe_device+0x1f8/0x400
[  +0.000008]  driver_probe_device+0x68/0x1b0
[  +0.000008]  __driver_attach+0x20c/0x480
[  +0.000009]  bus_for_each_dev+0x114/0x1b0
[  +0.000007]  driver_attach+0x48/0x64
[  +0.000009]  bus_add_driver+0x390/0x564
[  +0.000007]  driver_register+0x1a8/0x3e4
[  +0.000009]  __platform_driver_register+0x6c/0x94
[  +0.000007]  meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi]
[  +0.000014]  do_one_initcall+0xc4/0x2b0
[  +0.000008]  do_init_module+0x154/0x570
[  +0.000010]  load_module+0x1a78/0x1ea4
[  +0.000008]  __do_sys_init_module+0x184/0x1cc
[  +0.000008]  __arm64_sys_init_module+0x78/0xb0
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000008]  el0_svc+0x68/0x1a0
[  +0.000009]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000014] Allocated by task 902:
[  +0.000007]  kasan_save_stack+0x2c/0x5c
[  +0.000009]  __kasan_kmalloc+0x90/0xd0
[  +0.000007]  __kmalloc_node+0x240/0x580
[  +0.000010]  memcg_alloc_slab_cgroups+0xa4/0x1ac
[  +0.000010]  memcg_slab_post_alloc_hook+0xbc/0x4c0
[  +0.000008]  kmem_cache_alloc_node+0x1d0/0x490
[  +0.000009]  __alloc_skb+0x1d4/0x310
[  +0.000010]  alloc_skb_with_frags+0x8c/0x620
[  +0.000008]  sock_alloc_send_pskb+0x5ac/0x6d0
[  +0.000010]  unix_dgram_sendmsg+0x2e0/0x12f0
[  +0.000010]  sock_sendmsg+0xcc/0x110
[  +0.000007]  sock_write_iter+0x1d0/0x304
[  +0.000008]  new_sync_write+0x364/0x460
[  +0.000007]  vfs_write+0x420/0x5ac
[  +0.000008]  ksys_write+0x19c/0x1f0
[  +0.000008]  __arm64_sys_write+0x78/0xb0
[  +0.000007]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0x1a8/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000008]  el0t_64_sync_handler+0x11c/0x150
[  +0.000008]  el0t_64_sync+0x18c/0x190

[  +0.000013] Freed by task 2509:
[  +0.000008]  kasan_save_stack+0x2c/0x5c
[  +0.000007]  kasan_set_track+0x2c/0x40
[  +0.000008]  kasan_set_free_info+0x28/0x50
[  +0.000008]  ____kasan_slab_free+0x128/0x1d4
[  +0.000008]  __kasan_slab_free+0x18/0x24
[  +0.000007]  slab_free_freelist_hook+0x108/0x230
[  +0.000010]  kfree+0x110/0x35c
[  +0.000008]  release_nodes+0xf0/0x16c
[  +0.000008]  devres_release_all+0xfc/0x180
[  +0.000008]  device_unbind_cleanup+0x24/0x164
[  +0.000008]  device_release_driver_internal+0x3e8/0x5b0
[  +0.000010]  driver_detach+0xac/0x1b0
[  +0.000008]  bus_remove_driver+0x158/0x29c
[  +0.000008]  driver_unregister+0x70/0xb0
[  +0.000009]  platform_driver_unregister+0x20/0x2c
[  +0.000007]  0xffff800003722d98
[  +0.000012]  __do_sys_delete_module+0x288/0x400
[  +0.000009]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000008]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000013] Last potentially related work creation:
[  +0.000007]  kasan_save_stack+0x2c/0x5c
[  +0.000007]  __kasan_record_aux_stack+0xb8/0xf0
[  +0.000009]  kasan_record_aux_stack_noalloc+0x14/0x20
[  +0.000008]  insert_work+0x54/0x290
[  +0.000009]  __queue_work+0x48c/0xd24
[  +0.000008]  queue_work_on+0x90/0x11c
[  +0.000008]  call_usermodehelper_exec+0x188/0x404
[  +0.000010]  kobject_uevent_env+0x5a8/0x794
[  +0.000010]  kobject_uevent+0x14/0x20
[  +0.000008]  driver_register+0x230/0x3e4
[  +0.000009]  __platform_driver_register+0x6c/0x94
[  +0.000007]  gxbb_driver_init+0x28/0x34
[  +0.000010]  do_one_initcall+0xc4/0x2b0
[  +0.000008]  do_initcalls+0x20c/0x24c
[  +0.000010]  kernel_init_freeable+0x22c/0x278
[  +0.000009]  kernel_init+0x3c/0x170
[  +0.000008]  ret_from_fork+0x10/0x20

[  +0.000013] The buggy address belongs to the object at ffff000006731600
               which belongs to the cache kmalloc-256 of size 256
[  +0.000009] The buggy address is located 136 bytes inside of
               256-byte region [ffff000006731600, ffff000006731700)

[  +0.000015] The buggy address belongs to the physical page:
[  +0.000008] page:fffffc000019cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff000006730a00 pfn:0x6730
[  +0.000011] head:fffffc000019cc00 order:2 compound_mapcount:0 compound_pincount:0
[  +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[  +0.000016] raw: 0ffff00000010200 fffffc00000c3d08 fffffc0000ef2b08 ffff000000002680
[  +0.000009] raw: ffff000006730a00 0000000000150014 00000001ffffffff 0000000000000000
[  +0.000006] page dumped because: kasan: bad access detected

[  +0.000011] Memory state around the buggy address:
[  +0.000007]  ffff000006731580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000007]  ffff000006731600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] >ffff000006731680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]                       ^
[  +0.000006]  ffff000006731700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000007]  ffff000006731780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000006] ==================================================================

Fix by adding 'remove' driver callback for meson-drm, and explicitly deleting the
aggregate device.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-3-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: reorder driver deinit sequence to fix use-after-free bug

[ Upstream commit 31c519981eb141c7ec39bfd5be25d35f02edb868 ]

Unloading the driver triggers the following KASAN warning:

[  +0.006275] =============================================================
[  +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0
[  +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695

[  +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G         C O      5.19.0-rc6-lrmbkasan+ #1
[  +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT)
[  +0.000008] Call trace:
[  +0.000007]  dump_backtrace+0x1ec/0x280
[  +0.000013]  show_stack+0x24/0x80
[  +0.000008]  dump_stack_lvl+0x98/0xd4
[  +0.000011]  print_address_description.constprop.0+0x80/0x520
[  +0.000011]  print_report+0x128/0x260
[  +0.000007]  kasan_report+0xb8/0xfc
[  +0.000008]  __asan_report_load8_noabort+0x3c/0x50
[  +0.000010]  __list_del_entry_valid+0xe0/0x1a0
[  +0.000009]  drm_atomic_private_obj_fini+0x30/0x200 [drm]
[  +0.000172]  drm_bridge_detach+0x94/0x260 [drm]
[  +0.000145]  drm_encoder_cleanup+0xa4/0x290 [drm]
[  +0.000144]  drm_mode_config_cleanup+0x118/0x740 [drm]
[  +0.000143]  drm_mode_config_init_release+0x1c/0x2c [drm]
[  +0.000144]  drm_managed_release+0x170/0x414 [drm]
[  +0.000142]  drm_dev_put.part.0+0xc0/0x124 [drm]
[  +0.000143]  drm_dev_put+0x20/0x30 [drm]
[  +0.000142]  meson_drv_unbind+0x1d8/0x2ac [meson_drm]
[  +0.000028]  take_down_aggregate_device+0xb0/0x160
[  +0.000016]  component_del+0x18c/0x360
[  +0.000009]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[  +0.000015]  platform_remove+0x64/0xb0
[  +0.000009]  device_remove+0xb8/0x154
[  +0.000009]  device_release_driver_internal+0x398/0x5b0
[  +0.000009]  driver_detach+0xac/0x1b0
[  +0.000009]  bus_remove_driver+0x158/0x29c
[  +0.000009]  driver_unregister+0x70/0xb0
[  +0.000008]  platform_driver_unregister+0x20/0x2c
[  +0.000008]  meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[  +0.000012]  __do_sys_delete_module+0x288/0x400
[  +0.000011]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000009]  invoke_syscall+0x74/0x260
[  +0.000009]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000012]  el0t_64_sync_handler+0x11c/0x150
[  +0.000008]  el0t_64_sync+0x18c/0x190

[  +0.000018] Allocated by task 0:
[  +0.000007] (stack is not available)

[  +0.000011] Freed by task 2695:
[  +0.000008]  kasan_save_stack+0x2c/0x5c
[  +0.000011]  kasan_set_track+0x2c/0x40
[  +0.000008]  kasan_set_free_info+0x28/0x50
[  +0.000009]  ____kasan_slab_free+0x128/0x1d4
[  +0.000008]  __kasan_slab_free+0x18/0x24
[  +0.000007]  slab_free_freelist_hook+0x108/0x230
[  +0.000011]  kfree+0x110/0x35c
[  +0.000008]  release_nodes+0xf0/0x16c
[  +0.000009]  devres_release_group+0x180/0x270
[  +0.000008]  component_unbind+0x128/0x1e0
[  +0.000010]  component_unbind_all+0x1b8/0x264
[  +0.000009]  meson_drv_unbind+0x1a0/0x2ac [meson_drm]
[  +0.000025]  take_down_aggregate_device+0xb0/0x160
[  +0.000009]  component_del+0x18c/0x360
[  +0.000009]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[  +0.000012]  platform_remove+0x64/0xb0
[  +0.000008]  device_remove+0xb8/0x154
[  +0.000009]  device_release_driver_internal+0x398/0x5b0
[  +0.000009]  driver_detach+0xac/0x1b0
[  +0.000009]  bus_remove_driver+0x158/0x29c
[  +0.000008]  driver_unregister+0x70/0xb0
[  +0.000008]  platform_driver_unregister+0x20/0x2c
[  +0.000008]  meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[  +0.000011]  __do_sys_delete_module+0x288/0x400
[  +0.000010]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000009]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000014] The buggy address belongs to the object at ffff000020c39000
               which belongs to the cache kmalloc-4k of size 4096
[  +0.000008] The buggy address is located 1504 bytes inside of
               4096-byte region [ffff000020c39000, ffff000020c3a000)

[  +0.000016] The buggy address belongs to the physical page:
[  +0.000009] page:fffffc0000830e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20c38
[  +0.000013] head:fffffc0000830e00 order:3 compound_mapcount:0 compound_pincount:0
[  +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[  +0.000019] raw: 0ffff00000010200 fffffc0000fd4808 fffffc0000126208 ffff000000002e80
[  +0.000009] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[  +0.000008] page dumped because: kasan: bad access detected

[  +0.000011] Memory state around the buggy address:
[  +0.000008]  ffff000020c39480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]  ffff000020c39500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] >ffff000020c39580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]                                                        ^
[  +0.000007]  ffff000020c39600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]  ffff000020c39680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000006] ==================================================================

The reason this is happening is unloading meson-dw-hdmi will cause the
component API to take down the aggregate device, which in turn will cause
all devres-managed memory to be freed, including the struct dw_hdmi
allocated in dw_hdmi_probe. This struct embeds a struct drm_bridge that is
added at the end of the function, and which is later on picked up in
meson_encoder_hdmi_init.

However, when attaching the bridge to the encoder created in
meson_encoder_hdmi_init, it's linked to the encoder's bridge chain, from
where it never leaves, even after devres_release_group is called when the
driver's components are unbound and the embedding structure freed.

Then, when calling drm_dev_put in the aggregate driver's unbind function,
drm_bridge_detach is called for every single bridge linked to the encoder,
including the one whose memory had already been deallocated.

Fix by calling component_unbind_all after drm_dev_put.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-2-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix initial connector audio value

[ Upstream commit 4bb71fce58f30df3f251118291d6b0187ce531e6 ]

This got lost somewhere along the way, This fixes
audio not working until set_property was called.

Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: pci: Change DMI match info to support all Chrome platforms

[ Upstream commit c1c1fc8103f794a10c5c15e3c17879caf4f42c8f ]

In some Chrome platforms if OEM's use their own string as SYS_VENDOR than
"Google", it leads to firmware load failure from intel/sof/community path.

Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used
as common prefix and is supported in all Chrome platforms.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading

[ Upstream commit 2a2565272a3628e45d61625e36ef17af7af4e3de ]

On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not
properly autoload.

This is likely caused by issues with how systemd-udevd handles the single
quote char (') which is part of the sys_vendor / chassis_vendor strings
on this laptop. As a workaround remove the single quote char + everything
behind it from the sys_vendor + chassis_vendor matches. This fixes
the module not autoloading.

Link: https://github.com/systemd/systemd/issues/24715
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec: Notify the PM of wake events during resume

[ Upstream commit 8edd2752b0aa498b3a61f3caee8f79f7e0567fad ]

cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.

Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.

Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for Anbernic Win600

[ Upstream commit 770e19076065e079a32f33eb11be2057c87f1cde ]

This device is another x86 gaming handheld, and as (hopefully) there is
only one set of DMI IDs it's using DMI_EXACT_MATCH

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803182402.1217293-1-maccraft123mc@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: vec: Fix timings for VEC modes

[ Upstream commit 30d7565be96b3946c18a1ce3fd538f7946839092 ]

This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.

Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.

Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Register card at the last interface

[ Upstream commit 6392dcd1d0c7034ccf630ec55fc9e5810ecadf3b ]

The USB-audio driver matches per interface, and as default, it
registers the card instance at the very first instance.  This can be a
problem for the devices that have multiple interfaces to be probed, as
the udev rule isn't applied properly for the later appearing
interfaces.  Although we introduced the delayed_register option and
the quirks for covering those shortcomings, it's nothing but a
workaround for specific devices.

This patch is an another attempt to fix the problem in a more generic
way.  Now the driver checks the whole USB device descriptor at the
very first time when an interface is attached to a sound card.  It
looks at each matching interface in the descriptor and remembers the
last matching one.  The snd_card_register() is invoked only when this
last interface is probed.

After this change, the quirks for the delayed registration become
superfluous, hence they are removed along with the patch.  OTOH, the
delayed_register option is still kept, as it might be useful for some
corner cases (e.g. a special driver overtakes the interface probe from
the standard driver, and the last interface probe may miss).

Link: https://lore.kernel.org/r/20220904161247.16461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: bridge: dw_hdmi: only trigger hotplug event on link change

[ Upstream commit da09daf881082266e4075657fac53c7966de8e4d ]

There are two events that signal a real change of the link state: HPD going
high means the sink is newly connected or wants the source to re-read the
EDID, RX sense going low is a indication that the link has been disconnected.

Ignore the other two events that also trigger interrupts, but don't need
immediate attention: HPD going low does not necessarily mean the link has
been lost and should not trigger a immediate read of the status. RX sense
going high also does not require a detect cycle, as HPD going high is the
right point in time to read the EDID.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1)
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

udmabuf: Set ubuf->sg = NULL if the creation of sg table fails

[ Upstream commit d9c04a1b7a15b5e74b2977461d9511e497f05d8f ]

When userspace tries to map the dmabuf and if for some reason
(e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be
set to NULL. Otherwise, when the userspace subsequently closes the
dmabuf fd, we'd try to erroneously free the invalid sg table from
release_udmabuf resulting in the following crash reported by syzbot:

general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted
5.19.0-syzkaller-13930-g7ebfc85e2cd7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 07/22/2022
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c
8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14
02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2
RSP: 0018:ffffc900037efd30 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000
RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000
R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000
FS:  0000555555fc4300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78
 __dentry_kill+0x42b/0x640 fs/dcache.c:612
 dentry_kill fs/dcache.c:733 [inline]
 dput+0x806/0xdb0 fs/dcache.c:913
 __fput+0x39c/0x9d0 fs/file_table.c:333
 task_work_run+0xdd/0x1a0 kernel/task_work.c:177
 ptrace_notify+0x114/0x140 kernel/signal.c:2353
 ptrace_report_syscall include/linux/ptrace.h:420 [inline]
 ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline]
 syscall_exit_work kernel/entry/common.c:249 [inline]
 syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276
 __syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline]
 syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc1c0c35b6b
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24
0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b
RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c
R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114

Reported-by: syzbot+c80e9ef5d8bb45894db0@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220825063522.801264-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix overflow on MIN_I64 definition

[ Upstream commit 6ae0632d17759852c07e2d1e0a31c728eb6ba246 ]

The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about
integer overflow, because it is treated as a positive value, which is
then negated. The temporary positive value is not necessarily
representable.

This causes the following warning:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19:
warning: integer overflow in expression ‘-9223372036854775808’ of type
‘long long int’ results in ‘-9223372036854775808’ [-Woverflow]
  30 |         (int64_t)(-(1LL << 63))
     |                   ^

Writing out (-MAX_I64 - 1) works instead.

Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()

[ Upstream commit ef8886f321c5dab8124b9153d25afa2a71d05323 ]

A NULL check for bridge->encoder shows that it may be NULL, but it
already been dereferenced on all paths leading to the check.
812 if (!bridge->encoder) {

Dereference the pointer bridge->encoder.
810 drm_connector_attach_encoder(&lt9611->connector, bridge->encoder);

Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727073119.1578972-1-zengjx95@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/komeda: Fix handling of atomic commits in the atomic_commit_tail hook

[ Upstream commit eaa225b6b52233d45457fd33730e1528c604d92d ]

Komeda driver relies on the generic DRM atomic helper functions to handle
commits. It only implements an atomic_commit_tail hook for the
mode_config_helper_funcs and even that one is pretty close to the generic
implementation with the exception of additional dma_fence signalling.

What the generic helper framework doesn't do is waiting for the actual
hardware to signal that the commit parameters have been written into the
appropriate registers. As we signal CRTC events only on the irq handlers,
we need to flush the configuration and wait for the hardware to respond.

Add the Komeda specific implementation for atomic_commit_hw_done() that
flushes and waits for flip done before calling drm_atomic_helper_commit_hw_done().

The fix was prompted by a patch from Carsten Haitzler where he was trying to
solve the same issue but in a different way that I think can lead to wrong
event signaling to userspace.

Reported-by: Carsten Haitzler <carsten.haitzler@arm.com>
Tested-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220722122139.288486-1-liviu.dudau@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Prevent drm_copy_field() to attempt copying a NULL pointer

[ Upstream commit f6ee30407e883042482ad4ad30da5eaba47872ee ]

There are some struct drm_driver fields that are required by drivers since
drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION.

But it can be possible that a driver has a bug and did not set some of the
fields, which leads to drm_copy_field() attempting to copy a NULL pointer:

[ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[  +0.010955] Mem abort info:
[  +0.002835]   ESR = 0x0000000096000004
[  +0.003872]   EC = 0x25: DABT (current EL), IL = 32 bits
[  +0.005395]   SET = 0, FnV = 0
[  +0.003113]   EA = 0, S1PTW = 0
[  +0.003182]   FSC = 0x04: level 0 translation fault
[  +0.004964] Data abort info:
[  +0.002919]   ISV = 0, ISS = 0x00000004
[  +0.003886]   CM = 0, WnR = 0
[  +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000
[  +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  +0.006925] Internal error: Oops: 96000004 [#1] SMP
...
[  +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  +0.007061] pc : __pi_strlen+0x14/0x150
[  +0.003895] lr : drm_copy_field+0x30/0x1a4
[  +0.004156] sp : ffff8000094b3a50
[  +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040
[  +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040
[  +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000
[  +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000
[  +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40
[  +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8
[  +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141
[  +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[  +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000
[  +0.007240] Call trace:
[  +0.002475]  __pi_strlen+0x14/0x150
[  +0.003537]  drm_version+0x84/0xac
[  +0.003448]  drm_ioctl_kernel+0xa8/0x16c
[  +0.003975]  drm_ioctl+0x270/0x580
[  +0.003448]  __arm64_sys_ioctl+0xb8/0xfc
[  +0.003978]  invoke_syscall+0x78/0x100
[  +0.003799]  el0_svc_common.constprop.0+0x4c/0xf4
[  +0.004767]  do_el0_svc+0x38/0x4c
[  +0.003357]  el0_svc+0x34/0x100
[  +0.003185]  el0t_64_sync_handler+0x11c/0x150
[  +0.004418]  el0t_64_sync+0x190/0x194
[  +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02)
[  +0.006180] ---[ end trace 0000000000000000 ]---

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-3-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Use size_t type for len variable in drm_copy_field()

[ Upstream commit 94dc3471d1b2b58b3728558d0e3f264e9ce6ff59 ]

The strlen() function returns a size_t which is an unsigned int on 32-bit
arches and an unsigned long on 64-bit arches. But in the drm_copy_field()
function, the strlen() return value is assigned to an 'int len' variable.

Later, the len variable is passed as copy_from_user() third argument that
is an unsigned long parameter as well.

In theory, this can lead to an integer overflow via type conversion. Since
the assignment happens to a signed int lvalue instead of a size_t lvalue.

In practice though, that's unlikely since the values copied are set by DRM
drivers and not controlled by userspace. But using a size_t for len is the
correct thing to do anyways.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-2-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()

[ Upstream commit 6dc548745d5b5102e3c53dc5097296ac270b6c69 ]

nouveau_bo_alloc() allocates a memory chunk for "nvbo" with kzalloc().
When some error occurs, "nvbo" should be released. But when
WARN_ON(pi < 0)) equals true, the function return ERR_PTR without
releasing the "nvbo", which will lead to a memory leak.

We should release the "nvbo" with kfree() if WARN_ON(pi < 0)) equals true.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705094306.2244103-1-niejianglei2021@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Rate limit overflow messages

[ Upstream commit 93e2be344a7db169b7119de21ac1bf253b8c6907 ]

My system shows almost 10 million of these messages over a 24-hour
period which pollutes my logs.

Signed-off-by: Andrew Gaul <gaul@google.com>
Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: Fix user-after-free

[ Upstream commit 35fcbc4243aad7e7d020b7c1dfb14bb888b20a4f ]

This uses l2cap_chan_hold_unless_zero() after calling
__l2cap_get_chan_blah() to prevent the following trace:

Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref
*kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mutex.c:191 [inline]
BUG: KASAN: use-after-free in __mutex_lock_common
kernel/locking/mutex.c:671 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400
kernel/locking/mutex.c:729
Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389

Link: https://lore.kernel.org/lkml/20220622082716.478486-1-lee.jones@linaro.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory

[ Upstream commit 3f8ef65af927db247418d4e1db49164d7a158fc5 ]

Fixes the below NULL pointer dereference:

  [...]
  [   14.471200] Call Trace:
  [   14.471562]  <TASK>
  [   14.471882]  lock_acquire+0x245/0x2e0
  [   14.472416]  ? remove_wait_queue+0x12/0x50
  [   14.473014]  ? _raw_spin_lock_irqsave+0x17/0x50
  [   14.473681]  _raw_spin_lock_irqsave+0x3d/0x50
  [   14.474318]  ? remove_wait_queue+0x12/0x50
  [   14.474907]  remove_wait_queue+0x12/0x50
  [   14.475480]  sk_stream_wait_memory+0x20d/0x340
  [   14.476127]  ? do_wait_intr_irq+0x80/0x80
  [   14.476704]  do_tcp_sendpages+0x287/0x600
  [   14.477283]  tcp_bpf_push+0xab/0x260
  [   14.477817]  tcp_bpf_sendmsg_redir+0x297/0x500
  [   14.478461]  ? __local_bh_enable_ip+0x77/0xe0
  [   14.479096]  tcp_bpf_send_verdict+0x105/0x470
  [   14.479729]  tcp_bpf_sendmsg+0x318/0x4f0
  [   14.480311]  sock_sendmsg+0x2d/0x40
  [   14.480822]  ____sys_sendmsg+0x1b4/0x1c0
  [   14.481390]  ? copy_msghdr_from_user+0x62/0x80
  [   14.482048]  ___sys_sendmsg+0x78/0xb0
  [   14.482580]  ? vmf_insert_pfn_prot+0x91/0x150
  [   14.483215]  ? __do_fault+0x2a/0x1a0
  [   14.483738]  ? do_fault+0x15e/0x5d0
  [   14.484246]  ? __handle_mm_fault+0x56b/0x1040
  [   14.484874]  ? lock_is_held_type+0xdf/0x130
  [   14.485474]  ? find_held_lock+0x2d/0x90
  [   14.486046]  ? __sys_sendmsg+0x41/0x70
  [   14.486587]  __sys_sendmsg+0x41/0x70
  [   14.487105]  ? intel_pmu_drain_pebs_core+0x350/0x350
  [   14.487822]  do_syscall_64+0x34/0x80
  [   14.488345]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  [...]

The test scenario has the following flow:

thread1                               thread2
-----------                           ---------------
 tcp_bpf_sendmsg
  tcp_bpf_send_verdict
   tcp_bpf_sendmsg_redir              sock_close
    tcp_bpf_push_locked                 __sock_release
     tcp_bpf_push                         //inet_release
      do_tcp_sendpages                    sock->ops->release
       sk_stream_wait_memory              // tcp_close
          sk_wait_event                      sk->sk_prot->close
           release_sock(__sk);
            ***
                                                lock_sock(sk);
                                                  __tcp_close
                                                    sock_orphan(sk)
                                                      sk->sk_wq  = NULL
                                                release_sock
            ****
           lock_sock(__sk);
          remove_wait_queue(sk_sleep(sk), &wait);
             sk_sleep(sk)
             //NULL pointer dereference
             &rcu_dereference_raw(sk->sk_wq)->wait

While waiting for memory in thread1, the socket is released with its wait
queue because thread2 has closed it. This caused by tcp_bpf_send_verdict
didn't increase the f_count of psock->sk_redir->sk_socket->file in thread1.

We should check if SOCK_DEAD flag is set on wakeup in sk_stream_wait_memory
before accessing the wait queue.

Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20220823133755.314697-2-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (sht4x) do not overflow clamping operation on 32-bit platforms

[ Upstream commit f9c0cf8f26de367c58e48b02b1cdb9c377626e6f ]

On 32-bit platforms, long is 32 bits, so (long)UINT_MAX is less than
(long)SHT4X_MIN_POLL_INTERVAL, which means the clamping operation is
bogus. Fix this by clamping at INT_MAX, so that the upperbound is the
same on all platforms.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220924101151.4168414-1-Jason@zx2c4.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rt2x00: correctly set BBP register 86 for MT7620

[ Upstream commit c9aada64fe6493461127f1522d7e2f01792d2424 ]

Instead of 0 set the correct value for BBP register 86 for MT7620.

Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rt2x00: set SoC wmac clock register

[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ]

Instead of using the default value 33 (pci), set US_CYC_CNT init based
on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.

Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rt2x00: set VGC gain for both chains of MT7620

[ Upstream commit 0e09768c085709e10ece3b68f6ac921d3f6a9caa ]

Set bbp66 for all chains of the MT7620.

Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620

[ Upstream commit eeb50acf15762b61921f9df18663f839f387c054 ]

Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the
vendor driver[1].

[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620

[ Upstream commit d3aad83d05aec0cfd7670cf0028f2ad4b81de92e ]

The function rt2800_iq_calibrate is intended for Rt5592 only.
Don't call it for MT7620 which has it's own calibration functions.

Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: bcm: check the result of can_send() in bcm_can_tx()

[ Upstream commit 3fd7bfd28cfd68ae80a2fe92ea1615722cc2ee6e ]

If can_send() fail, it should not update frames_abs counter
in bcm_can_tx(). Add the result check for can_send() in bcm_can_tx().

Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/9851878e74d6d37aee2f1ee76d68361a46f89458.1663206163.git.william.xuanziyang@huawei.com
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times

[ Upstream commit 448a496f760664d3e2e79466aa1787e6abc922b5 ]

device_add shall not be called multiple times as stated in its
documentation:

 'Do not call this routine or device_register() more than once for
 any device structure'

Syzkaller reports a bug as follows [1]:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:33!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[...]
Call Trace:
 <TASK>
 __list_add include/linux/list.h:69 [inline]
 list_add_tail include/linux/list.h:102 [inline]
 kobj_kset_join lib/kobject.c:164 [inline]
 kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214
 kobject_add_varg lib/kobject.c:358 [inline]
 kobject_add+0x150/0x1c0 lib/kobject.c:410
 device_add+0x368/0x1e90 drivers/base/core.c:3452
 hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53
 hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799
 hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110
 hci_event_func net/bluetooth/hci_event.c:7440 [inline]
 hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495
 hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007
 process_one_work+0x991/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e4/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
 </TASK>

Link: https://syzkaller.appspot.com/bug?id=da3246e2d33afdb92d66bc166a0934c5b146404a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()

[ Upstream commit 2d2cb3066f2c90cd8ca540b36ba7a55e7f2406e0 ]

syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at
l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent
l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer
which fires before l2cap_chan_del() is called by closing file descriptor
created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP).

l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP)
are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which
clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded.

l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets
CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when
connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds
 from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4
seconds from connect() request, for l2cap_conn_start() from
l2cap_info_timeout() callback scheduled by

  schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);

in l2cap_connect() is calling l2cap_chan_ready().

Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM
mode as soon as l2cap_chan_create() allocates a channel, like I did in
commit be8597239379f0f5 ("Bluetooth: initialize skb_queue_head at
l2cap_chan_create()").

Link: https://syzkaller.appspot.com/bug?extid=83672956c7aa6af698b3
Reported-by: syzbot <syzbot+83672956c7aa6af698b3@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7921: reset msta->airtime_ac while clearing up hw value

[ Upstream commit 1bf66dc31032ff5292f4d5b76436653f269fcfbd ]

We should reset mstat->airtime_ac along with clear up the entries in the
hardware WLAN table for the Rx and Rx accumulative airtime. Otherwsie, the
value msta->airtime_ac - [tx, rx]_last may be a negative and that is not
the actual airtime the device took in the last run.

Reported-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Prevent integer underflow

[ Upstream commit 8d8e16592022c9650df8aedfe6552ed478d7135b ]

By using a ratio of delay to poll_enabled_time that is not integer
time_remaining underflows and does not exit the loop as expected.
As delay could be derived from DT and poll_enabled_time is defined
in the driver this can easily happen.

Use a signed iterator to make sure that the loop exits once
the remaining time is negative.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20220909125954.577669-1-patrick.rudolph@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk

[ Upstream commit dd0a1794f4334ddbf9b7c5e7d642aaffff38c69b ]

HarrrisonPeak, CyclonePeak, SnowFieldPeak and SandyPeak controllers
are marked to support HCI_QUIRK_LE_STATES.

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()

[ Upstream commit 3f42faf6db431e04bf942d2ebe3ae88975723478 ]

> ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb);

may be schedule, and then complete before the line

> ndev->stats.tx_bytes += skb->len;

[   46.912801] ==================================================================
[   46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328
[   46.935991]
[   46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G           O      5.4.199-[REDACTED] #1
[   46.947255] Hardware name: [REDACTED]
[   46.954568] Call trace:
[   46.957037]  dump_backtrace+0x0/0x2b8
[   46.960719]  show_stack+0x24/0x30
[   46.964052]  dump_stack+0x128/0x194
[   46.967557]  print_address_description.isra.0+0x64/0x380
[   46.972877]  __kasan_report+0x1d4/0x240
[   46.976723]  kasan_report+0xc/0x18
[   46.980138]  __asan_report_load4_noabort+0x18/0x20
[   46.985027]  brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[   46.990613]  dev_hard_start_xmit+0x1bc/0xda0
[   46.994894]  sch_direct_xmit+0x198/0xd08
[   46.998827]  __qdisc_run+0x37c/0x1dc0
[   47.002500]  __dev_queue_xmit+0x1528/0x21f8
[   47.006692]  dev_queue_xmit+0x24/0x30
[   47.010366]  neigh_resolve_output+0x37c/0x678
[   47.014734]  ip_finish_output2+0x598/0x2458
[   47.018927]  __ip_finish_output+0x300/0x730
[   47.023118]  ip_output+0x2e0/0x430
[   47.026530]  ip_local_out+0x90/0x140
[   47.030117]  igmpv3_sendpack+0x14c/0x228
[   47.034049]  igmpv3_send_cr+0x384/0x6b8
[   47.037895]  igmp_ifc_timer_expire+0x4c/0x118
[   47.042262]  call_timer_fn+0x1cc/0xbe8
[   47.046021]  __run_timers+0x4d8/0xb28
[   47.049693]  run_timer_softirq+0x24/0x40
[   47.053626]  __do_softirq+0x2c0/0x117c
[   47.057387]  irq_exit+0x2dc/0x388
[   47.060715]  __handle_domain_irq+0xb4/0x158
[   47.064908]  gic_handle_irq+0x58/0xb0
[   47.068581]  el0_irq_naked+0x50/0x5c
[   47.072162]
[   47.073665] Allocated by task 328:
[   47.077083]  save_stack+0x24/0xb0
[   47.080410]  __kasan_kmalloc.isra.0+0xc0/0xe0
[   47.084776]  kasan_slab_alloc+0x14/0x20
[   47.088622]  kmem_cache_alloc+0x15c/0x468
[   47.092643]  __alloc_skb+0xa4/0x498
[   47.096142]  igmpv3_newpack+0x158/0xd78
[   47.099987]  add_grhead+0x210/0x288
[   47.103485]  add_grec+0x6b0/0xb70
[   47.106811]  igmpv3_send_cr+0x2e0/0x6b8
[   47.110657]  igmp_ifc_timer_expire+0x4c/0x118
[   47.115027]  call_timer_fn+0x1cc/0xbe8
[   47.118785]  __run_timers+0x4d8/0xb28
[   47.122457]  run_timer_softirq+0x24/0x40
[   47.126389]  __do_softirq+0x2c0/0x117c
[   47.130142]
[   47.131643] Freed by task 180:
[   47.134712]  save_stack+0x24/0xb0
[   47.138041]  __kasan_slab_free+0x108/0x180
[   47.142146]  kasan_slab_free+0x10/0x18
[   47.145904]  slab_free_freelist_hook+0xa4/0x1b0
[   47.150444]  kmem_cache_free+0x8c/0x528
[   47.154292]  kfree_skbmem+0x94/0x108
[   47.157880]  consume_skb+0x10c/0x5a8
[   47.161466]  __dev_kfree_skb_any+0x88/0xa0
[   47.165598]  brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil]
[   47.171023]  brcmf_txfinalize+0xec/0x190 [brcmfmac]
[   47.176016]  brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac]
[   47.182056]  brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac]
[   47.187568]  brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac]
[   47.192529]  brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac]
[   47.197859]  process_one_work+0x7fc/0x1a80
[   47.201965]  worker_thread+0x31c/0xc40
[   47.205726]  kthread+0x2d8/0x370
[   47.208967]  ret_from_fork+0x10/0x18
[   47.212546]
[   47.214051] The buggy address belongs to the object at ffffff803f588280
[   47.214051]  which belongs to the cache skbuff_head_cache of size 208
[   47.227086] The buggy address is located 104 bytes inside of
[   47.227086]  208-byte region [ffffff803f588280, ffffff803f588350)
[   47.238814] The buggy address belongs to the page:
[   47.243618] page:ffffffff00dd6200 refcount:1 mapcount:0 mapping:ffffff804b6bf800 index:0xffffff803f589900 compound_mapcount: 0
[   47.255007] flags: 0x10200(slab|head)
[   47.258689] raw: 0000000000010200 ffffffff00dfa980 0000000200000002 ffffff804b6bf800
[   47.266439] raw: ffffff803f589900 0000000080190018 00000001ffffffff 0000000000000000
[   47.274180] page dumped because: kasan: bad access detected
[   47.279752]
[   47.281251] Memory state around the buggy address:
[   47.286051]  ffffff803f588180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.293277]  ffffff803f588200: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   47.300502] >ffffff803f588280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   47.307723]                                                           ^
[   47.314343]  ffffff803f588300: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc
[   47.321569]  ffffff803f588380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[   47.328789] ==================================================================

Signed-off-by: Alexander Coffin <alex.coffin@matician.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220808174925.3922558-1-alex.coffin@matician.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix race between iavf_close and iavf_reset_task

[ Upstream commit 11c12adcbc1598d91e73ab6ddfa41d25a01478ed ]

During stress tests with adding VF to namespace and changing vf's
trust there was a race between iavf_reset_task and iavf_close.
Sometimes when IAVF_FLAG_AQ_DISABLE_QUEUES from iavf_close was sent
to PF after reset and before IAVF_AQ_GET_CONFIG was sent then PF
returns error IAVF_NOT_SUPPORTED to disable queues request and
following requests. There is need to get_config before other
aq_required will be send but iavf_close clears all flags, if
get_config was not sent before iavf_close, then it will not be send
at all.

In case when IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS was sent before
IAVF_FLAG_AQ_DISABLE_QUEUES then there was rtnl_lock deadlock
between iavf_close and iavf_adminq_task until iavf_close timeouts
and disable queues was sent after iavf_close ends.

There was also a problem with sending delete/add filters.
Sometimes when filters was not yet added to PF and in
iavf_close all filters was set to remove there might be a try
to remove nonexistent filters on PF.

Add aq_required_tmp to save aq_required flags and send them after
disable_queues will be handled. Clear flags given to iavf_down
different than IAVF_FLAG_AQ_GET_CONFIG as this flag is necessary
to sent other aq_required. Remove some flags that we don't
want to send as we are in iavf_close and we want to disable
interface. Remove filters which was not yet sent and send del
filters flags only when there are filters to remove.

Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Update ipcomp_scratches with NULL when freed

[ Upstream commit 8a04d2fc700f717104bfb95b0f6694e448a4537f ]

Currently if ipcomp_alloc_scratches() fails to allocate memory
ipcomp_scratches holds obsolete address. So when we try to free the
percpu scratches using ipcomp_free_scratches() it tries to vfree non
existent vm area. Described below:

static void * __percpu *ipcomp_alloc_scratches(void)
{
        ...
        scratches = alloc_percpu(void *);
        if (!scratches)
                return NULL;
ipcomp_scratches does not know about this allocation failure.
Therefore holding the old obsolete address.
        ...
}

So when we free,

static void ipcomp_free_scratches(void)
{
        ...
        scratches = ipcomp_scratches;
Assigning obsolete address from ipcomp_scratches

        if (!scratches)
                return;

        for_each_possible_cpu(i)
               vfree(*per_cpu_ptr(scratches, i));
Trying to free non existent page, causing warning: trying to vfree
existent vm area.
        ...
}

Fix this breakage by updating ipcomp_scrtches with NULL when scratches
is freed

Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: syzbot+5ec9bb042ddfe9644773@syzkaller.appspotmail.com
Tested-by: syzbot+5ec9bb042ddfe9644773@syzkaller.appspotmail.com
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thunderbolt: Add back Intel Falcon Ridge end-to-end flow control workaround

[ Upstream commit 54669e2f17cb5a4c41ade89427f074dc22cecb17 ]

As we are now enabling full end-to-end flow control to the Thunderbolt
networking driver, in order for it to work properly on second generation
Thunderbolt hardware (Falcon Ridge), we need to add back the workaround
that was removed with commit 53f13319d131 ("thunderbolt: Get rid of E2E
workaround"). However, this time we only apply it for Falcon Ridge
controllers as a form of an additional quirk. For non-Falcon Ridge this
does nothing.

While there fix a typo 'reqister' -> 'register' in the comment.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()

[ Upstream commit b383e8abed41cc6ff1a3b34de75df9397fa4878c ]

syzbot is reporting uninit value at ath9k_htc_rx_msg() [1], for
ioctl(USB_RAW_IOCTL_EP_WRITE) can call ath9k_hif_usb_rx_stream() with
pkt_len = 0 but ath9k_hif_usb_rx_stream() uses
__dev_alloc_skb(pkt_len + 32, GFP_ATOMIC) based on an assumption that
pkt_len is valid. As a result, ath9k_hif_usb_rx_stream() allocates skb
with uninitialized memory and ath9k_htc_rx_msg() is reading from
uninitialized memory.

Since bytes accessed by ath9k_htc_rx_msg() is not known until
ath9k_htc_rx_msg() is called, it would be difficult to check minimal valid
pkt_len at "if (pkt_len > 2 * MAX_RX_BUF_SIZE) {" line in
ath9k_hif_usb_rx_stream().

We have two choices. One is to workaround by adding __GFP_ZERO so that
ath9k_htc_rx_msg() sees 0 if pkt_len is invalid. The other is to let
ath9k_htc_rx_msg() validate pkt_len before accessing. This patch chose
the latter.

Note that I'm not sure threshold condition is correct, for I can't find
details on possible packet length used by this protocol.

Link: https://syzkaller.appspot.com/bug?extid=2ca247c2d60c7023de7f
Reported-by: syzbot <syzbot+2ca247c2d60c7023de7f@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/7acfa1be-4b5c-b2ce-de43-95b0593fb3e5@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Retrieve poison range from hardware

[ Upstream commit f9781bb18ed828e7b83b7bac4a4ad7cd497ee7d7 ]

When memory poison consumption machine checks fire, MCE notifier
handlers like nfit_handle_mce() record the impacted physical address
range which is reported by the hardware in the MCi_MISC MSR. The error
information includes data about blast radius, i.e. how many cachelines
did the hardware determine are impacted. A recent change

  7917f9cdb503 ("acpi/nfit: rely on mce->misc to determine poison granularity")

updated nfit_handle_mce() to stop hard coding the blast radius value of
1 cacheline, and instead rely on the blast radius reported in 'struct
mce' which can be up to 4K (64 cachelines).

It turns out that apei_mce_report_mem_error() had a similar problem in
that it hard coded a blast radius of 4K rather than reading the blast
radius from the error information. Fix apei_mce_report_mem_error() to
convey the proper poison granularity.

Signed-off-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/7ed50fd8-521e-cade-77b1-738b8bfb8502@oracle.com
Link: https://lore.kernel.org/r/20220826233851.1319100-1-jane.chu@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: annotate data-race around tcp_md5sig_pool_populated

[ Upstream commit aacd467c0a576e5e44d2de4205855dc0fe43f6fb ]

tcp_md5sig_pool_populated can be read while another thread
changes its value.

The race has no consequence because allocations
are protected with tcp_md5sig_mutex.

This patch adds READ_ONCE() and WRITE_ONCE() to document
the race and silence KCSAN.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openvswitch: Fix overreporting of drops in dropwatch

[ Upstream commit c21ab2afa2c64896a7f0e3cbc6845ec63dcfad2e ]

Currently queue_userspace_packet will call kfree_skb for all frames,
whether or not an error occurred. This can result in a single dropped
frame being reported as multiple drops in dropwatch. This functions
caller may also call kfree_skb in case of an error. This patch will
consume the skbs instead and allow caller's to use kfree_skb.

Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109957
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openvswitch: Fix double reporting of drops in dropwatch

[ Upstream commit 1100248a5c5ccd57059eb8d02ec077e839a23826 ]

Frames sent to userspace can be reported as dropped in
ovs_dp_process_packet, however, if they are dropped in the netlink code
then netlink_attachskb will report the same frame as dropped.

This patch checks for error codes which indicate that the frame has
already been freed.

Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109946
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: davinci_mdio: Add workaround for errata i2329

[ Upstream commit d04807b80691c6041ca8e3dcf1870d1bf1082c22 ]

On the CPSW and ICSS peripherals, there is a possibility that the MDIO
interface returns corrupt data on MDIO reads or writes incorrect data
on MDIO writes. There is also a possibility for the MDIO interface to
become unavailable until the next peripheral reset.

The workaround is to configure the MDIO in manual mode and disable the
MDIO state machine and emulate the MDIO protocol by reading and writing
appropriate fields in MDIO_MANUAL_IF_REG register of the MDIO controller
to manipulate the MDIO clock and data pins.

More details about the errata i2329 and the workaround is available in:
https://www.ti.com/lit/er/sprz487a/sprz487a.pdf

Add implementation to disable MDIO state machine, configure MDIO in manual
mode and achieve MDIO read and writes via MDIO Bitbanging

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: set tx_tstamps when creating new Tx rings via ethtool

[ Upstream commit b3b173745c8cab1e24d6821488b60abed3acb24d ]

When the user changes the number of queues via ethtool, the driver
allocates new rings. This allocation did not initialize tx_tstamps. This
results in the tx_tstamps field being zero (due to kcalloc allocation), and
would result in a NULL pointer dereference when attempting a transmit
timestamp on the new ring.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Clear errno after libcap's checks

[ Upstream commit cea558855c39b7f1f02ff50dcf701ca6596bc964 ]

When bpftool is linked against libcap, the library runs a "constructor"
function to compute the number of capabilities of the running kernel
[0], at the beginning of the execution of the program. As part of this,
it performs multiple calls to prctl(). Some of these may fail, and set
errno to a non-zero value:

    # strace -e prctl ./bpftool version
    prctl(PR_CAPBSET_READ, CAP_MAC_OVERRIDE) = 1
    prctl(PR_CAPBSET_READ, 0x30 /* CAP_??? */) = -1 EINVAL (Invalid argument)
    prctl(PR_CAPBSET_READ, CAP_CHECKPOINT_RESTORE) = 1
    prctl(PR_CAPBSET_READ, 0x2c /* CAP_??? */) = -1 EINVAL (Invalid argument)
    prctl(PR_CAPBSET_READ, 0x2a /* CAP_??? */) = -1 EINVAL (Invalid argument)
    prctl(PR_CAPBSET_READ, 0x29 /* CAP_??? */) = -1 EINVAL (Invalid argument)
    ** fprintf added at the top of main(): we have errno == 1
    ./bpftool v7.0.0
    using libbpf v1.0
    features: libbfd, libbpf_strict, skeletons
    +++ exited with 0 +++

This has been addressed in libcap 2.63 [1], but until this version is
available everywhere, we can fix it on bpftool side.

Let's clean errno at the beginning of the main() function, to make sure
that these checks do not interfere with the batch mode, where we error
out if errno is set after a bpftool command.

  [0] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/tree/libcap/cap_alloc.c?h=libcap-2.65#n20
  [1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=f25a1b7e69f7b33e6afb58b3e38f3450b7d2d9a0

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220815162205.45043-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: brcmfmac: fix invalid address access when enabling SCAN log level

[ Upstream commit aa666b68e73fc06d83c070d96180b9010cf5a960 ]

The variable i is changed when setting random MAC address and causes
invalid address access when printing the value of pi->reqs[i]->reqid.

We replace reqs index with ri to fix the issue.

[  136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[  136.737365] Mem abort info:
[  136.740172]   ESR = 0x96000004
[  136.743359]   Exception class = DABT (current EL), IL = 32 bits
[  136.749294]   SET = 0, FnV = 0
[  136.752481]   EA = 0, S1PTW = 0
[  136.755635] Data abort info:
[  136.758514]   ISV = 0, ISS = 0x00000004
[  136.762487]   CM = 0, WnR = 0
[  136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577
[  136.772265] [0000000000000000] pgd=0000000000000000
[  136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[  136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O)
[  136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb)
[  136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G           O      4.19.42-00001-g531a5f5 #1
[  136.805532] Hardware name: Freescale i.MX8MQ EVK (DT)
[  136.810584] pstate: 60400005 (nZCv daif +PAN -UAO)
[  136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[  136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac]
[  136.828162] sp : ffff00000e9a3880
[  136.831475] x29: ffff00000e9a3890 x28: ffff800020543400
[  136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0
[  136.842098] x25: ffff80002054345c x24: ffff800088d22400
[  136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8
[  136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400
[  136.858032] x19: ffff00000e9a3946 x18: 0000000000000000
[  136.863343] x17: 0000000000000000 x16: 0000000000000000
[  136.868655] x15: ffff0000093f3b37 x14: 0000000000000050
[  136.873966] x13: 0000000000003135 x12: 0000000000000000
[  136.879277] x11: 0000000000000000 x10: ffff000009a61888
[  136.884589] x9 : 000000000000000f x8 : 0000000000000008
[  136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d
[  136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942
[  136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8
[  136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000
[  136.911146] Call trace:
[  136.913623]  brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[  136.919658]  brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac]
[  136.925430]  brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac]
[  136.931636]  nl80211_start_sched_scan+0x140/0x308 [cfg80211]
[  136.937298]  genl_rcv_msg+0x358/0x3f4
[  136.940960]  netlink_rcv_skb+0xb4/0x118
[  136.944795]  genl_rcv+0x34/0x48
[  136.947935]  netlink_unicast+0x264/0x300
[  136.951856]  netlink_sendmsg+0x2e4/0x33c
[  136.955781]  __sys_sendto+0x120/0x19c

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-4-alvin@pqrs.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: fix use-after-free on source server when doing inter-server copy

[ Upstream commit 019805fea91599b22dfa62ffb29c022f35abeb06 ]

Use-after-free occurred when the laundromat tried to free expired
cpntf_state entry on the s2s_cp_stateids list after inter-server
copy completed. The sc_cp_list that the expired copy state was
inserted on was already freed.

When COPY completes, the Linux client normally sends LOCKU(lock_state x),
FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server.
The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state
from the s2s_cp_stateids list before freeing the lock state's stid.

However, sometimes the CLOSE was sent before the FREE_STATEID request.
When this happens, the nfsd4_close_open_stateid call from nfsd4_close
frees all lock states on its st_locks list without cleaning up the copy
state on the sc_cp_list list. When the time the FREE_STATEID arrives the
server returns BAD_STATEID since the lock state was freed. This causes
the use-after-free error to occur when the laundromat tries to free
the expired cpntf_state.

This patch adds a call to nfs4_free_cpntf_statelist in
nfsd4_close_open_stateid to clean up the copy state before calling
free_ol_stateid_reaplist to free the lock state's stid on the reaplist.

Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data

[ Upstream commit 06981d560606ac48d61e5f4fff6738b925c93173 ]

This was discussed with Chuck as part of this patch set. Returning
nfserr_resource was decided to not be the best error message here, and
he suggested changing to nfserr_serverfault instead.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Link: https://lore.kernel.org/linux-nfs/20220907195259.926736-1-anna@kernel.org/T/#t
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/entry: Work around Clang __bdos() bug

[ Upstream commit 3e1730842f142add55dc658929221521a9ea62b6 ]

Clang produces a false positive when building with CONFIG_FORTIFY_SOURCE=y
and CONFIG_UBSAN_BOUNDS=y when operating on an array with a dynamic
offset. Work around this by using a direct assignment of an empty
instance. Avoids this warning:

../include/linux/fortify-string.h:309:4: warning: call to __write_overflow_field declared with 'warn
ing' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wat
tribute-warning]
                        __write_overflow_field(p_size_field, size);
                        ^

which was isolated to the memset() call in xen_load_idt().

Note that this looks very much like another bug that was worked around:
https://github.com/ClangBuiltLinux/linux/issues/1592

Cc: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/lkml/41527d69-e8ab-3f86-ff37-6b298c01d5bc@oracle.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable

[ Upstream commit 018d6711c26e4bd26e20a819fcc7f8ab902608f3 ]

Dell Inspiron 14 2-in-1 has two ACPI nodes under GPP1 both with _ADR of
0, both without _HID.  It's ambiguous which the kernel should take, but
it seems to take "DEV0".  Unfortunately "DEV0" is missing the device
property `StorageD3Enable` which is present on "NVME".

To avoid this causing problems for suspend, add a quirk for this system
to behave like `StorageD3Enable` property was found.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: decompressor: Include .data.rel.ro.local

[ Upstream commit 1b64daf413acd86c2c13f5443f6b4ef3690c8061 ]

The .data.rel.ro.local section has the same semantics as .data.rel.ro
here, so include it in the .rodata section of the decompressor.
Additionally since the .printk_index section isn't usable outside of
the core kernel, discard it in the decompressor. Avoids these warnings:

arm-linux-gnueabi-ld: warning: orphan section `.data.rel.ro.local' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.data.rel.ro.local'
arm-linux-gnueabi-ld: warning: orphan section `.printk_index' from `arch/arm/boot/compressed/fdt_rw.o' being placed in section `.printk_index'

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202209080545.qMIVj7YM-lkp@intel.com
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash

[ Upstream commit 68b99e94a4a2db6ba9b31fe0485e057b9354a640 ]

When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:

BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...

Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.

Use get_cpu() instead of smp_processor_id() to avoid this BUG.

Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue

[ Upstream commit 2d93540014387d1c73b9ccc4d7895320df66d01b ]

When value < time_unit, the parameter of ilog2() will be zero and
the return value is -1. u64(-1) is too large for shift exponent
and then will trigger shift-out-of-bounds:

shift exponent 18446744073709551615 is too large for 32-bit type 'int'
Call Trace:
 rapl_compute_time_window_core
 rapl_write_data_raw
 set_time_window
 store_constraint_time_window_us

Signed-off-by: Chao Qin <chao.qin@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: BCM47XX: Cast memcmp() of function to (void *)

[ Upstream commit 0dedcf6e3301836eb70cfa649052e7ce4fcd13ba ]

Clang is especially sensitive about argument type matching when using
__overloaded functions (like memcmp(), etc). Help it see that function
pointers are just "void *". Avoids this error:

arch/mips/bcm47xx/prom.c:89:8: error: no matching function for call to 'memcmp'
                   if (!memcmp(prom_init, prom_init + mem, 32))
                        ^~~~~~
include/linux/string.h:156:12: note: candidate function not viable: no known conversion from 'void (void)' to 'const void *' for 1st argument extern int memcmp(const void *,const void *,__kernel_size_t);

Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: llvm@lists.linux.dev
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202209080652.sz2d68e5-lkp@intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode

[ Upstream commit 71bb5c82aaaea007167f3ba68d3a669c74d7d55d ]

Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.

Add TIGERLAKE to the list of CPUs that can register intel_pstate while not
advertising the HWP capability. Without this change, an TIGERLAKE in no-HWP
mode could only use the acpi_cpufreq frequency scaling driver.

See also commits:
d8de7a44e11f: cpufreq: intel_pstate: Add Skylake servers support
fbdc21e9b038: cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode
706c5328851d: cpufreq: intel_pstate: Add Cometlake support in no-HWP mode

Reported by: M. Cargi Ari <cagriari@pm.me>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address

[ Upstream commit 211391bf04b3c74e250c566eeff9cf808156c693 ]

On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table
which contains invalid physical addresses, with high bits set which fall
outside the range of the CPU-s supported physical address range.

Calling acpi_os_map_memory() on such an invalid phys address leads to
the below WARN_ON in ioremap triggering resulting in an oops/stacktrace.

Add code to verify the physical address before calling acpi_os_map_memory()
to fix / avoid the oops.

[    1.226900] ioremap: invalid physical address 3001000000000000
[    1.226949] ------------[ cut here ]------------
[    1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f
[    1.226996] Modules linked in:
[    1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490
[    1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[    1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f
[    1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00
[    1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286
[    1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000
[    1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff
[    1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18
[    1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008
[    1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000
[    1.227135] FS:  0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000
[    1.227146] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0
[    1.227167] Call Trace:
[    1.227176]  <TASK>
[    1.227185]  ? acpi_os_map_iomem+0x1c9/0x1e0
[    1.227215]  ? kmem_cache_alloc_trace+0x187/0x370
[    1.227254]  acpi_os_map_iomem+0x1c9/0x1e0
[    1.227288]  acpi_init_fpdt+0xa8/0x253
[    1.227308]  ? acpi_debugfs_init+0x1f/0x1f
[    1.227339]  do_one_initcall+0x5a/0x300
[    1.227406]  ? rcu_read_lock_sched_held+0x3f/0x80
[    1.227442]  kernel_init_freeable+0x28b/0x2cc
[    1.227512]  ? rest_init+0x170/0x170
[    1.227538]  kernel_init+0x16/0x140
[    1.227552]  ret_from_fork+0x1f/0x30
[    1.227639]  </TASK>
[    1.227647] irq event stamp: 186819
[    1.227656] hardirqs last  enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70
[    1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70
[    1.227686] softirqs last  enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[    1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[    1.227715] ---[ end trace 0000000000000000 ]---

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Add Toshiba Satellite/Portege Z830 quirk

[ Upstream commit 574160b8548deff8b80b174f03201e94ab8431e2 ]

Toshiba Satellite Z830 needs the quirk video_disable_backlight_sysfs_if
for proper backlight control after suspend/resume cycles.

Toshiba Portege Z830 is simply the same laptop rebranded for certain
markets (I looked through the manual to other language sections to confirm
this) and thus also needs this quirk.

Thanks to Hans de Goede for suggesting this fix.

Link: https://www.spinics.net/lists/platform-driver-x86/msg34394.html
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()

[ Upstream commit fcd53c8a4dfa38bafb89efdd0b0f718f3a03f884 ]

Kernels built with CONFIG_PROVE_RCU=y and CONFIG_DEBUG_LOCK_ALLOC=y
attempt to emit a warning when the synchronize_rcu_tasks_generic()
function is called during early boot while the rcu_scheduler_active
variable is RCU_SCHEDULER_INACTIVE.  However the warnings is not
actually be printed because the debug_lockdep_rcu_enabled() returns
false, exactly because the rcu_scheduler_active variable is still equal
to RCU_SCHEDULER_INACTIVE.

This commit therefore replaces RCU_LOCKDEP_WARN() with WARN_ONCE()
to force these warnings to actually be printed.

Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Back off upon fill_page_cache_func() allocation failure

[ Upstream commit 093590c16b447f53e66771c8579ae66c96f6ef61 ]

The fill_page_cache_func() function allocates couple of pages to store
kvfree_rcu_bulk_data structures. This is a lightweight (GFP_NORETRY)
allocation which can fail under memory pressure. The function will,
however keep retrying even when the previous attempt has failed.

This retrying is in theory correct, but in practice the allocation is
invoked from workqueue context, which means that if the memory reclaim
gets stuck, these retries can hog the worker for quite some time.
Although the workqueues subsystem automatically adjusts concurrency, such
adjustment is not guaranteed to happen until the worker context sleeps.
And the fill_page_cache_func() function's retry loop is not guaranteed
to sleep (see the should_reclaim_retry() function).

And we have seen this function cause workqueue lockups:

kernel: BUG: workqueue lockup - pool cpus=93 node=1 flags=0x1 nice=0 stuck for 32s!
[...]
kernel: pool 74: cpus=37 node=0 flags=0x1 nice=0 hung=32s workers=2 manager: 2146
kernel:   pwq 498: cpus=249 node=1 flags=0x1 nice=0 active=4/256 refcnt=5
kernel:     in-flight: 1917:fill_page_cache_func
kernel:     pending: dbs_work_handler, free_work, kfree_rcu_monitor

Originally, we thought that the root cause of this lockup was several
retries with direct reclaim, but this is not yet confirmed.  Furthermore,
we have seen similar lockups without any heavy memory pressure.  This
suggests that there are other factors contributing to these lockups.
However, it is not really clear that endless retries are desireable.

So let's make the fill_page_cache_func() function back off after
allocation failure.

Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Avoid triggering strict-GP irq-work when RCU is idle

[ Upstream commit 621189a1fe93cb2b34d62c5cdb9e258bca044813 ]

Kernels built with PREEMPT_RCU=y and RCU_STRICT_GRACE_PERIOD=y trigger
irq-work from rcu_read_unlock(), and the resulting irq-work handler
invokes rcu_preempt_deferred_qs_handle().  The point of this triggering
is to force grace periods to end quickly in order to give tools like KASAN
a better chance of detecting RCU usage bugs such as leaking RCU-protected
pointers out of an RCU read-side critical section.

However, this irq-work triggering is unconditional.  This works, but
there is no point in doing this irq-work unless the current grace period
is waiting on the running CPU or task, which is not the common case.
After all, in the common case there are many rcu_read_unlock() calls
per CPU per grace period.

This commit therefore triggers the irq-work only when the current grace
period is waiting on the running CPU or task.

This change was tested as follows on a four-CPU system:

echo rcu_preempt_deferred_qs_handler > /sys/kernel/debug/tracing/set_ftrace_filter
echo 1 > /sys/kernel/debug/tracing/function_profile_enabled
insmod rcutorture.ko
sleep 20
rmmod rcutorture.ko
echo 0 > /sys/kernel/debug/tracing/function_profile_enabled
echo > /sys/kernel/debug/tracing/set_ftrace_filter

This procedure produces results in this per-CPU set of files:

/sys/kernel/debug/tracing/trace_stat/function*

Sample output from one of these files is as follows:

  Function                               Hit    Time            Avg             s^2
  --------                               ---    ----            ---             ---
  rcu_preempt_deferred_qs_handle      838746    182650.3 us     0.217 us        0.004 us

The baseline sum of the "Hit" values (the number of calls to this
function) was 3,319,015.  With this commit, that sum was 1,140,359,
for a 2.9x reduction.  The worst-case variance across the CPUs was less
than 25%, so this large effect size is statistically significant.

The raw data is available in the Link: URL.

Link: https://lore.kernel.org/all/20220808022626.12825-1-qiang1.zhang@intel.com/
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: fix race in lowcomms

[ Upstream commit 30ea3257e8766027c4d8d609dcbd256ff9a76073 ]

This patch fixes a race between queue_work() in
_dlm_lowcomms_commit_msg() and srcu_read_unlock(). The queue_work() can
take the final reference of a dlm_msg and so msg->idx can contain
garbage which is signaled by the following warning:

[  676.237050] ------------[ cut here ]------------
[  676.237052] WARNING: CPU: 0 PID: 1060 at include/linux/srcu.h:189 dlm_lowcomms_commit_msg+0x41/0x50
[  676.238945] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common iTCO_wdt iTCO_vendor_support qxl kvm_intel drm_ttm_helper vmw_vsock_virtio_transport kvm vmw_vsock_virtio_transport_common ttm irqbypass crc32_pclmul joydev crc32c_intel serio_raw drm_kms_helper vsock virtio_scsi virtio_console virtio_balloon snd_pcm drm syscopyarea sysfillrect sysimgblt snd_timer fb_sys_fops i2c_i801 lpc_ich snd i2c_smbus soundcore pcspkr
[  676.244227] CPU: 0 PID: 1060 Comm: lock_torture_wr Not tainted 5.19.0-rc3+ #1546
[  676.245216] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[  676.246460] RIP: 0010:dlm_lowcomms_commit_msg+0x41/0x50
[  676.247132] Code: fe ff ff ff 75 24 48 c7 c6 bd 0f 49 bb 48 c7 c7 38 7c 01 bd e8 00 e7 ca ff 89 de 48 c7 c7 60 78 01 bd e8 42 3d cd ff 5b 5d c3 <0f> 0b eb d8 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48
[  676.249253] RSP: 0018:ffffa401c18ffc68 EFLAGS: 00010282
[  676.249855] RAX: 0000000000000001 RBX: 00000000ffff8b76 RCX: 0000000000000006
[  676.250713] RDX: 0000000000000000 RSI: ffffffffbccf3a10 RDI: ffffffffbcc7b62e
[  676.251610] RBP: ffffa401c18ffc70 R08: 0000000000000001 R09: 0000000000000001
[  676.252481] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000005
[  676.253421] R13: ffff8b76786ec370 R14: ffff8b76786ec370 R15: ffff8b76786ec480
[  676.254257] FS:  0000000000000000(0000) GS:ffff8b7777800000(0000) knlGS:0000000000000000
[  676.255239] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  676.255897] CR2: 00005590205d88b8 CR3: 000000017656c003 CR4: 0000000000770ee0
[  676.256734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  676.257567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  676.258397] PKRU: 55555554
[  676.258729] Call Trace:
[  676.259063]  <TASK>
[  676.259354]  dlm_midcomms_commit_mhandle+0xcc/0x110
[  676.259964]  queue_bast+0x8b/0xb0
[  676.260423]  grant_pending_locks+0x166/0x1b0
[  676.261007]  _unlock_lock+0x75/0x90
[  676.261469]  unlock_lock.isra.57+0x62/0xa0
[  676.262009]  dlm_unlock+0x21e/0x330
[  676.262457]  ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[  676.263183]  torture_unlock+0x5a/0x90 [dlm_locktorture]
[  676.263815]  ? preempt_count_sub+0xba/0x100
[  676.264361]  ? complete+0x1d/0x60
[  676.264777]  lock_torture_writer+0xb8/0x150 [dlm_locktorture]
[  676.265555]  kthread+0x10a/0x130
[  676.266007]  ? kthread_complete_and_exit+0x20/0x20
[  676.266616]  ret_from_fork+0x22/0x30
[  676.267097]  </TASK>
[  676.267381] irq event stamp: 9579855
[  676.267824] hardirqs last  enabled at (9579863): [<ffffffffbb14e6f8>] __up_console_sem+0x58/0x60
[  676.268896] hardirqs last disabled at (9579872): [<ffffffffbb14e6dd>] __up_console_sem+0x3d/0x60
[  676.270008] softirqs last  enabled at (9579798): [<ffffffffbc200349>] __do_softirq+0x349/0x4c7
[  676.271438] softirqs last disabled at (9579897): [<ffffffffbb0d54c0>] irq_exit_rcu+0xb0/0xf0
[  676.272796] ---[ end trace 0000000000000000 ]---

I reproduced this warning with dlm_locktorture test which is currently
not upstream. However this patch fix the issue by make a additional
refcount between dlm_lowcomms_new_msg() and dlm_lowcomms_commit_msg().
In case of the race the kref_put() in dlm_lowcomms_commit_msg() will be
the final put.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle

[ Upstream commit 2d869f0b458547386fbcd8cf3004b271b7347b7f ]

The following output can bee seen when the test is executed:

  test_flush_context (tpm2_tests.SpaceTest) ... \
    /usr/lib64/python3.6/unittest/case.py:605: ResourceWarning: \
    unclosed file <_io.FileIO name='/dev/tpmrm0' mode='rb+' closefd=True>

An instance of Client does not implicitly close /dev/tpm* handle, once it
gets destroyed. Close the file handle in the class destructor
Client.__del__().

Fixes: 6ea3dfe1e0732 ("selftests: add TPM 2.0 tests")
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to account FS_CP_DATA_IO correctly

[ Upstream commit d80afefb17e01aa0c46a8eebc01882e0ebd8b0f6 ]

f2fs_inode_info.cp_task was introduced for FS_CP_DATA_IO accounting
since commit b0af6d491a6b ("f2fs: add app/fs io stat").

However, cp_task usage coverage has been increased due to below
commits:
commit 040d2bb318d1 ("f2fs: fix to avoid deadloop if data_flush is on")
commit 186857c5a14a ("f2fs: fix potential recursive call when enabling data_flush")

So that, if data_flush mountoption is on, when data flush was
triggered from background, the IO from data flush will be accounted
as checkpoint IO type incorrectly.

In order to fix this issue, this patch splits cp_task into two:
a) cp_task: used for IO accounting
b) wb_task: used to avoid deadlock

Fixes: 040d2bb318d1 ("f2fs: fix to avoid deadloop if data_flush is on")
Fixes: 186857c5a14a ("f2fs: fix potential recursive call when enabling data_flush")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix race condition on setting FI_NO_EXTENT flag

[ Upstream commit 07725adc55c0a414c10acb5c8c86cea34b95ddef ]

The following scenarios exist.
process A:               process B:
->f2fs_drop_extent_tree  ->f2fs_update_extent_cache_range
                          ->f2fs_update_extent_tree_range
                           ->write_lock
 ->set_inode_flag
                           ->is_inode_flag_set
                           ->__free_extent_tree // Shouldn't
                                                // have been
                                                // cleaned up
                                                // here
  ->write_lock

In this case, the "FI_NO_EXTENT" flag is set between
f2fs_update_extent_tree_range and is_inode_flag_set
by other process. it leads to clearing the whole exten
tree which should not have happened. And we fix it by
move the setting it to the range of write_lock.

Fixes:5f281fab9b9a3 ("f2fs: disable extent_cache for fcollapse/finsert inodes")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: APEI: do not add task_work to kernel thread to avoid memory leak

[ Upstream commit 415fed694fe11395df56e05022d6e7cee1d39dd3 ]

If an error is detected as a result of user-space process accessing a
corrupt memory location, the CPU may take an abort. Then the platform
firmware reports kernel via NMI like notifications, e.g. NOTIFY_SEA,
NOTIFY_SOFTWARE_DELEGATED, etc.

For NMI like notifications, commit 7f17b4a121d0 ("ACPI: APEI: Kick the
memory_failure() queue for synchronous errors") keep track of whether
memory_failure() work was queued, and make task_work pending to flush out
the queue so that the work is processed before return to user-space.

The code use init_mm to check whether the error occurs in user space:

    if (current->mm != &init_mm)

The condition is always true, becase _nobody_ ever has "init_mm" as a real
VM any more.

In addition to abort, errors can also be signaled as asynchronous
exceptions, such as interrupt and SError. In such case, the interrupted
current process could be any kind of thread. When a kernel thread is
interrupted, the work ghes_kick_task_work deferred to task_work will never
be processed because entry_handler returns to call ret_to_kernel() instead
of ret_to_user(). Consequently, the estatus_node alloced from
ghes_estatus_pool in ghes_in_nmi_queue_one_entry() will not be freed.
After around 200 allocations in our platform, the ghes_estatus_pool will
run of memory and ghes_in_nmi_queue_one_entry() returns ENOMEM. As a
result, the event failed to be processed.

    sdei: event 805 on CPU 113 failed with error: -2

Finally, a lot of unhandled events may cause platform firmware to exceed
some threshold and reboot.

The condition should generally just do

    if (current->mm)

as described in active_mm.rst documentation.

Then if an asynchronous error is detected when a kernel thread is running,
(e.g. when detected by a background scrubber), do not add task_work to it
as the original patch intends to do.

Fixes: 7f17b4a121d0 ("ACPI: APEI: Kick the memory_failure() queue for synchronous errors")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id

[ Upstream commit b0c883e900702f408d62cf92b0ef01303ed69be9 ]

Reading temperature from this sensor fails with 'Invalid argument'.

Looking at old vendor dts [1], its hw_id should be 3 instead of 4.
Change this hw_id accordingly.

[1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/master/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L511

Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220811105014.7194-1-vincent.knecht@mailoo.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: cavium - prevent integer overflow loading firmware

[ Upstream commit 2526d6bf27d15054bb0778b2f7bc6625fd934905 ]

The "code_length" value comes from the firmware file.  If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself.  Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.

The "ntohl(ucode->code_length) * 2" multiplication can have an
integer overflow.

Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: marvell/octeontx - prevent integer overflows

[ Upstream commit caca37cf6c749ff0303f68418cfe7b757a4e0697 ]

The "code_length" value comes from the firmware file.  If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself.  Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.

The "code_length * 2" can overflow.  The round_up(ucode_size, 16) +
sizeof() expression can overflow too.  Prevent these overflows.

Fixes: d9110b0b01ff ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: rpm-pkg: fix breakage when V=1 is used

[ Upstream commit 2e07005f4813a9ff6e895787e0c2d1fea859b033 ]

Doing make V=1 binrpm-pkg results in:

 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EgV6qJ
 + umask 022
 + cd .
 + /bin/rm -rf /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
 + /bin/mkdir -p /home/scgl/rpmbuild/BUILDROOT
 + /bin/mkdir /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x
 + mkdir -p /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot
 + make -f ./Makefile image_name
 + cp test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) arch/s390/boot/bzImage /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot/vmlinuz-6.0.0-rc5+
 cp: invalid option -- 'e'
 Try 'cp --help' for more information.
 error: Bad exit status from /var/tmp/rpm-tmp.EgV6qJ (%install)

Because the make call to get the image name is verbose and prints
additional information.

Fixes: 993bdde94547 ("kbuild: add image_name to no-sync-config-targets")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: remove the target in signal traps when interrupted

[ Upstream commit a7f3257da8a86b96fb9bf1bba40ae0bbd7f1885a ]

When receiving some signal, GNU Make automatically deletes the target if
it has already been changed by the interrupted recipe.

If the target is possibly incomplete due to interruption, it must be
deleted so that it will be remade from scratch on the next run of make.
Otherwise, the target would remain corrupted permanently because its
timestamp had already been updated.

Thanks to this behavior of Make, you can stop the build any time by
pressing Ctrl-C, and just run 'make' to resume it.

Kbuild also relies on this feature, but it is equivalently important
for any build systems that make decisions based on timestamps (if you
want to support Ctrl-C reliably).

However, this does not always work as claimed; Make immediately dies
with Ctrl-C if its stderr goes into a pipe.

  [Test Makefile]

    foo:
            echo hello > $@
            sleep 3
            echo world >> $@

  [Test Result]

    $ make                         # hit Ctrl-C
    echo hello > foo
    sleep 3
    ^Cmake: *** Deleting file 'foo'
    make: *** [Makefile:3: foo] Interrupt

    $ make 2>&1 | cat              # hit Ctrl-C
    echo hello > foo
    sleep 3
    ^C$                            # 'foo' is often left-over

The reason is because SIGINT is sent to the entire process group.
In this example, SIGINT kills 'cat', and 'make' writes the message to
the closed pipe, then dies with SIGPIPE before cleaning the target.

A typical bad scenario (as reported by [1], [2]) is to save build log
by using the 'tee' command:

    $ make 2>&1 | tee log

This can be problematic for any build systems based on Make, so I hope
it will be fixed in GNU Make. The maintainer of GNU Make stated this is
a long-standing issue and difficult to fix [3]. It has not been fixed
yet as of writing.

So, we cannot rely on Make cleaning the target. We can do it by
ourselves, in signal traps.

As far as I understand, Make takes care of SIGHUP, SIGINT, SIGQUIT, and
SITERM for the target removal. I added the traps for them, and also for
SIGPIPE just in case cmd_* rule prints something to stdout or stderr
(but I did not observe an actual case where SIGPIPE was triggered).

[Note 1]

The trap handler might be worth explaining.

    rm -f $@; trap - $(sig); kill -s $(sig) $$

This lets the shell kill itself by the signal it caught, so the parent
process can tell the child has exited on the signal. Generally, this is
a proper manner for handling signals, in case the calling program (like
Bash) may monitor WIFSIGNALED() and WTERMSIG() for WCE although this may
not be a big deal here because GNU Make handles SIGHUP, SIGINT, SIGQUIT
in WUE and SIGTERM in IUE.

  IUE - Immediate Unconditional Exit
  WUE - Wait and Unconditional Exit
  WCE - Wait and Cooperative Exit

For details, see "Proper handling of SIGINT/SIGQUIT" [4].

[Note 2]

Reverting 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd
files") would directly address [1], but it only saves if_changed_dep.
As reported in [2], all commands that use redirection can potentially
leave an empty (i.e. broken) target.

[Note 3]

Another (even safer) approach might be to always write to a temporary
file, and rename it to $@ at the end of the recipe.

   <command>  > $(tmp-target)
   mv $(tmp-target) $@

It would require a lot of Makefile changes, and result in ugly code,
so I did not take it.

[Note 4]

A little more thoughts about a pattern rule with multiple targets (or
a grouped target).

    %.x %.y: %.z
            <recipe>

When interrupted, GNU Make deletes both %.x and %.y, while this solution
only deletes $@. Probably, this is not a big deal. The next run of make
will execute the rule again to create $@ along with the other files.

[1]: https://lore.kernel.org/all/YLeot94yAaM4xbMY@gmail.com/
[2]: https://lore.kernel.org/all/20220510221333.2770571-1-robh@kernel.org/
[3]: https://lists.gnu.org/archive/html/help-make/2021-06/msg00001.html
[4]: https://www.cons.org/cracauer/sigint.html

Fixes: 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files")
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/osnoise: Fix possible recursive locking in stop_per_cpu_kthreads

[ Upstream commit 99ee9317a1305cd5626736785c8cb38b0e47686c ]

There is a recursive lock on the cpu_hotplug_lock.

In kernel/trace/trace_osnoise.c:<start/stop>_per_cpu_kthreads:
    - start_per_cpu_kthreads calls cpus_read_lock() and if
start_kthreads returns a error it will call stop_per_cpu_kthreads.
    - stop_per_cpu_kthreads then calls cpus_read_lock() again causing
      deadlock.

Fix this by calling cpus_read_unlock() before calling
stop_per_cpu_kthreads. This behavior can also be seen in commit
f46b16520a08 ("trace/hwlat: Implement the per-cpu mode").

This error was noticed during the LTP ftrace-stress-test:

WARNING: possible recursive locking detected
--------------------------------------------
sh/275006 is trying to acquire lock:
ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: stop_per_cpu_kthreads

but task is already holding lock:
ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: start_per_cpu_kthreads

other info that might help us debug this:
 Possible unsafe locking scenario:

      CPU0
      ----
 lock(cpu_hotplug_lock);
 lock(cpu_hotplug_lock);

 *** DEADLOCK ***

May be due to missing lock nesting notation

3 locks held by sh/275006:
 #0: ffff8881023f0470 (sb_writers#24){.+.+}-{0:0}, at: ksys_write
 #1: ffffffffb084f430 (trace_types_lock){+.+.}-{3:3}, at: rb_simple_write
 #2: ffffffffb02f5400 (cpu_hotplug_lock){++++}-{0:0}, at: start_per_cpu_kthreads

Link: https://lkml.kernel.org/r/20220919144932.3064014-1-npache@redhat.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Nico Pache <npache@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: kprobe: Make gen test module work in arm and riscv

[ Upstream commit d8ef45d66c01425ff748e13ef7dd1da7a91cc93c ]

For now, this selftest module can only work in x86 because of the
kprobe cmd was fixed use of x86 registers.
This patch adapted to register names under arm and riscv, So that
this module can be worked on those platform.

Link: https://lkml.kernel.org/r/20220919125629.238242-3-zouyipeng@huawei.com
Cc: <linux-riscv@lists.infradead.org>
Cc: <mingo@redhat.com>
Cc: <paul.walmsley@sifive.com>
Cc: <palmer@dabbelt.com>
Cc: <aou@eecs.berkeley.edu>
Cc: <zanussi@kernel.org>
Cc: <liaochang1@huawei.com>
Cc: <chris.zjh@huawei.com>
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: kprobe: Fix kprobe event gen test module on exit

[ Upstream commit ac48e189527fae87253ef2bf58892e782fb36874 ]

Correct gen_kretprobe_test clr event para on module exit.
This will make it can't to delete.

Link: https://lkml.kernel.org/r/20220919125629.238242-2-zouyipeng@huawei.com
Cc: <linux-riscv@lists.infradead.org>
Cc: <mingo@redhat.com>
Cc: <paul.walmsley@sifive.com>
Cc: <palmer@dabbelt.com>
Cc: <aou@eecs.berkeley.edu>
Cc: <zanussi@kernel.org>
Cc: <liaochang1@huawei.com>
Cc: <chris.zjh@huawei.com>
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/iova: Fix module config properly

[ Upstream commit 4f58330fcc8482aa90674e1f40f601e82f18ed4a ]

IOMMU_IOVA is intended to be an optional library for users to select as
and when they desire. Since it can be a module now, this means that
built-in code which has chosen not to select it should not fail to link
if it happens to have selected as a module by someone else. Replace
IS_ENABLED() with IS_REACHABLE() to do the right thing.

CC: Thierry Reding <thierry.reding@gmail.com>
Reported-by: John Garry <john.garry@huawei.com>
Fixes: 15bbdec3931e ("iommu: Make the iova library a module")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/548c2f683ca379aface59639a8f0cccc3a1ac050.1663069227.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: return correct error in ->calc_signature()

[ Upstream commit 09a1f9a168ae1f69f701689429871793174417d2 ]

If an error happens while getting the key or session in the
->calc_signature implementations, 0 (success) is returned. Fix it by
returning a proper error code.

Since it seems to be highly unlikely to happen wrap the rc check in
unlikely() too.

Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Fixes: 32811d242ff6 ("cifs: Start using per session key for smb2/3 for signature generation")
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: qat - fix DMA transfer direction

[ Upstream commit cf5bb835b7c8a5fee7f26455099cca7feb57f5e9 ]

When CONFIG_DMA_API_DEBUG is selected, while running the crypto self
test on the QAT crypto algorithms, the function add_dma_entry() reports
a warning similar to the one below, saying that overlapping mappings
are not supported. This occurs in tests where the input and the output
scatter list point to the same buffers (i.e. two different scatter lists
which point to the same chunks of memory).

The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL
for both the input and the output scatter lists which leads to
overlapped write mappings. These are not supported by the DMA layer.

Fix by specifying the correct DMA transfer directions when mapping
buffers. For in-place operations where the input scatter list
matches the output scatter list, buffers are mapped once with
DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag
DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE.
Overlapping a read mapping with a write mapping is a valid case in
dma-coherent devices like QAT.
The function that frees and unmaps the buffers, qat_alg_free_bufl()
has been changed accordingly to the changes to the mapping function.

   DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
   WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270
   ...
   Call Trace:
   dma_map_page_attrs+0x82/0x2d0
   ? preempt_count_add+0x6a/0xa0
   qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat]
   qat_alg_aead_dec+0x71/0x250 [intel_qat]
   crypto_aead_decrypt+0x3d/0x70
   test_aead_vec_cfg+0x649/0x810
   ? number+0x310/0x3a0
   ? vsnprintf+0x2a3/0x550
   ? scnprintf+0x42/0x70
   ? valid_sg_divisions.constprop.0+0x86/0xa0
   ? test_aead_vec+0xdf/0x120
   test_aead_vec+0xdf/0x120
   alg_test_aead+0x185/0x400
   alg_test+0x3d8/0x500
   ? crypto_acomp_scomp_free_ctx+0x30/0x30
   ? __schedule+0x32a/0x12a0
   ? ttwu_queue_wakelist+0xbf/0x110
   ? _raw_spin_unlock_irqrestore+0x23/0x40
   ? try_to_wake_up+0x83/0x570
   ? _raw_spin_unlock_irqrestore+0x23/0x40
   ? __set_cpus_allowed_ptr_locked+0xea/0x1b0
   ? crypto_acomp_scomp_free_ctx+0x30/0x30
   cryptomgr_test+0x27/0x50
   kthread+0xe6/0x110
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x1f/0x30

Fixes: d370cec ("crypto: qat - Intel(R) QAT crypto interface")
Link: https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: inside-secure - Change swab to swab32

[ Upstream commit 664593407e936b6438fbfaaf98876910fd31cf9a ]

The use of swab() is causing failures in 64-bit arch, as it
translates to __swab64() instead of the intended __swab32().
It eventually causes wrong results in xcbcmac & cmac algo.

Fixes: 78cf1c8bfcb8 ("crypto: inside-secure - Move ipad/opad into safexcel_context")
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Release dma channels before dmaengine unrgister

[ Upstream commit 68dbe80f5b510c66c800b9e8055235c5b07e37d1 ]

A warning is shown during shutdown,

__dma_async_device_channel_unregister called while 2 clients hold a reference
WARNING: CPU: 15 PID: 1 at drivers/dma/dmaengine.c:1110 __dma_async_device_channel_unregister+0xb7/0xc0

Call dma_release_channel for occupied channles before dma_async_device_unregister.

Fixes: 54cce8ecb925 ("crypto: ccp - ccp_dmaengine_unregister release dma channels")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: akcipher - default implementation for setting a private key

[ Upstream commit bc155c6c188c2f0c5749993b1405673d25a80389 ]

Changes from v1:
  * removed the default implementation from set_pub_key: it is assumed that
    an implementation must always have this callback defined as there are
    no use case for an algorithm, which doesn't need a public key

Many akcipher implementations (like ECDSA) support only signature
verifications, so they don't have all callbacks defined.

Commit 78a0324f4a53 ("crypto: akcipher - default implementations for
request callbacks") introduced default callbacks for sign/verify
operations, which just return an error code.

However, these are not enough, because before calling sign the caller would
likely call set_priv_key first on the instantiated transform (as the
in-kernel testmgr does). This function does not have a default stub, so the
kernel crashes, when trying to set a private key on an akcipher, which
doesn't support signature generation.

I've noticed this, when trying to add a KAT vector for ECDSA signature to
the testmgr.

With this patch the testmgr returns an error in dmesg (as it should)
instead of crashing the kernel NULL ptr dereference.

Fixes: 78a0324f4a53 ("crypto: akcipher - default implementations for request callbacks")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/omap: Fix buffer overflow in debugfs

[ Upstream commit 184233a5202786b20220acd2d04ddf909ef18f29 ]

There are two issues here:

1) The "len" variable needs to be checked before the very first write.
   Otherwise if omap2_iommu_dump_ctx() with "bytes" less than 32 it is a
   buffer overflow.
2) The snprintf() function returns the number of bytes that *would* have
   been copied if there were enough space.  But we want to know the
   number of bytes which were *actually* copied so use scnprintf()
   instead.

Fixes: bd4396f09a4a ("iommu/omap: Consolidate OMAP IOMMU modules")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/YuvYh1JbE3v+abd5@kili
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset

[ Upstream commit ec5fbdfb99d18482619ac42605cb80fbb56068ee ]

Previously, update_tasks_cpumask() is not supposed to be called with
top cpuset. With cpuset partition that takes CPUs away from the top
cpuset, adjusting the cpus_mask of the tasks in the top cpuset is
necessary. Percpu kthreads, however, are ignored.

Fixes: ee8dde0cd2ce ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix missing put dfx access

[ Upstream commit 5afc904f443de2afd31c4e0686ba178beede86fe ]

In function qm_cmd_write(), if function returns from
branch 'atomic_read(&qm->status.flags) == QM_STOP',
the got dfx access is forgotten to put.

Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix default value of WDT timer

[ Upstream commit cc40b04c08400d86d2d6ea0159e0617e717f729c ]

The QAT HW supports an hardware mechanism to detect an accelerator hang.
The reporting of a hang occurs after a watchdog timer (WDT) expires.

The value of the WDT set previously was too small and was causing false
positives.
Change the default value of the WDT to 0x7000000ULL to avoid this.

Fixes: 1c4d9d5bbb5a ("crypto: qat - enable detection of accelerators hang")
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear()

[ Upstream commit 10a2199caf437e893d9027d97700b3c6010048b7 ]

Issue:
While servicing interrupt, if the IRQ happens to be because of a SEED_DONE
due to a previous boot stage, you end up completing the completion
prematurely, hence causing kernel to crash while booting.

Fix:
Moving IRQ handler registering after imx_rngc_irq_mask_clear()

Fixes: 1d5449445bd0 (hwrng: mx-rngc - add a driver for Freescale RNGC)
Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: Honor caller's cgroup NS when resolving path

[ Upstream commit 74e4b956eb1cac0e4c10c240339b1bbfbc9a4c48 ]

cgroup_get_from_path() is not widely used function. Its callers presume
the path is resolved under cgroup namespace. (There is one caller
currently and resolving in init NS won't make harm (netfilter). However,
future users may be subject to different effects when resolving
globally.)
Since, there's currently no use for the global resolution, modify the
existing function to take cgroup NS into account.

Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: arm-smccc-trng - fix NO_ENTROPY handling

[ Upstream commit 042b4b169c6fb9d4df268d66282d7302dd73d37b ]

The SMCCC_RET_TRNG_NO_ENTROPY switch arm is never used because the
NO_ENTROPY return value is negative and negative values are handled
above the switch by immediately returning.

Fix by handling errors using a default arm in the switch.

Fixes: 0888d04b47a1 ("hwrng: Add Arm SMCCC TRNG based driver")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr

[ Upstream commit d74f9340097a881869c4c22ca376654cc2516ecc ]

KASAN reported this Bug:

[17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60
[17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958
...
[17619.698934] The buggy address belongs to the variable:
[17619.708371]  sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip]

There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr.
The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by
param_get/set_int.

Replacing param_get/set_int to param_get/set_ushort can fix this bug.

Fixes: f081fda293ffb ("crypto: hisilicon - add sgl_sge_nr module param for zip")
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sahara - don't sleep when in softirq

[ Upstream commit 108586eba094b318e6a831f977f4ddcc403a15da ]

Function of sahara_aes_crypt maybe could be called by function
of crypto_skcipher_encrypt during the rx softirq, so it is not
allowed to use mutex lock.

Fixes: c0c3c89ae347 ("crypto: sahara - replace tasklets with...")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>