drm/bridge: dw-hdmi: truly enforce 420-only formats when drm mode demands it

The current output bus format selection logic is enforcing YUV420 even
when the drm mode allows for other bus formats as well.
Fix it by adding check for 420-only drm modes.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6e6a217c180584a67ed7992c785764ba54af9151.1687702042.git.adrian.larumbe@collabora.com

drm/bridge: dw-hdmi: change YUV420 selection logic at clock setup

Right now clocking value selection code is prioritising RGB, YUV444 modes
over YUV420 for HDMI2 sinks. However, because of the bus format selection
procedure in dw-hdmi, for HDMI2 sinks YUV420 is the format that will always
be picked during the drm bridge chain check stage.

Later on dw_hdmi_setup will configure a colour space based on the bus
format that doesn't match the pixel value we had calculated as described
above.

Fix it by bringing back dw-hdmi bus format check when picking the right
pixel clock.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6230bfae2cd97cf6527fc62ba5c850464919ccf8.1687702042.git.adrian.larumbe@collabora.com

drm/prime: Unexport helpers for fd/handle conversion

Unexport drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd().
Both are only used internally within the PRIME code.

v2:
* reword docs as functions are now unexported (Simon)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-4-tzimmermann@suse.de

drm: Clear fd/handle callbacks in struct drm_driver

Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.

v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de

drm: Enable PRIME import/export for all drivers

Call drm_gem_prime_handle_to_fd() and drm_gem_prime_fd_to_handle() by
default if no PRIME import/export helpers have been set. Both functions
are the default for almost all drivers.

DRM drivers implement struct drm_driver.gem_prime_import_sg_table
to import dma-buf objects from other drivers. Having the function
drm_gem_prime_fd_to_handle() functions set by default allows each
driver to import dma-buf objects to itself, even without support for
other drivers.

For drm_gem_prime_handle_to_fd() it is similar: using it by default
allows each driver to export to itself, even without support for other
drivers.

This functionality enables userspace to share per-driver buffers
across process boundaries via PRIME (e.g., wlroots requires this
functionality). The patch generalizes a pattern that has previously
been implemented by GEM VRAM helpers [1] to work with any driver.
For example, gma500 can now run the wlroots-based sway compositor.

v2:
* clean up docs and TODO comments (Simon, Zack)
* clean up style in drm_getcap()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/20230302143502.500661-1-contact@emersion.fr/
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-2-tzimmermann@suse.de

drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()

When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL.  So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing).  Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead.

Fixes: cb285a5348e7 ("drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230612092359.784115-1-victor.liu@nxp.com

drm/vkms: Isolate writeback pixel conversion functions

All convertions from the ARGB16161616 format follow the same structure.
Instead of repeting the same structure for each supported format, create
a function to encapsulate the common logic and isolate the pixel
conversion functions in a callback function.

Suggested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515135204.115393-4-mcanal@igalia.com

drm/vkms: Enable ARGB8888 support for writeback

The VKMS already has a function to convert ARGB16161616 to ARGB8888, so
it is possible to use this function to provide the writeback support for
the ARGB8888 format. Therefore, add the ARGB8888 format to the writeback
format list.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515135204.115393-3-mcanal@igalia.com

drm/vkms: Reduce critical section

The spinlock composer_lock protects the variables crc_pending,
wb_pending, frame_start and frame_end, which are variables that are used
by the composer worker. There is no need to protect the wb_frame_info
information with a spinlock. Therefore, reduce the critical section of
the lock by removing the assignments to the wb_frame_info from the
critical section.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515135204.115393-2-mcanal@igalia.com

drm/bridge: ps8640: Drop the ability of ps8640 to fetch the EDID

In order to read the EDID from an eDP panel, you not only need to
power on the bridge chip itself but also the panel. In the ps8640
driver, this was made to work by having the bridge chip manually power
the panel on by calling pre_enable() on everything connectorward on
the bridge chain. This worked OK, but...

...when trying to do the same thing on ti-sn65dsi86, feedback was that
this wasn't a great idea. As a result, we designed the "DP AUX"
bus. With the design we ended up with the panel driver itself was in
charge of reading the EDID. The panel driver could power itself on and
the bridge chip was able to power itself on because it implemented the
DP AUX bus.

Despite the fact that we came up with a new scheme, implemented in on
ti-sn65dsi86, and even implemented it on parade-ps8640, we still kept
the old code around. This was because the new scheme required a DT
change. Previously the panel was a simple "platform_device" and in DT
at the top level. With the new design the panel needs to be listed in
DT under the DP controller node. The old code allowed us to properly
fetch EDIDs with ps8640 with the old DTs.

Unfortunately, the old code stopped working as of commit 102e80d1fa2c
("drm/bridge: ps8640: Use atomic variants of drm_bridge_funcs"). There
are cases at bootup where connector->state->state is NULL and the
kernel crashed at:
* drm_atomic_bridge_chain_pre_enable
* drm_atomic_get_old_bridge_state
* drm_atomic_get_old_private_obj_state

The crash went away at commit 4fb912e5e190 ("drm/bridge: Introduce
pre_enable_prev_first to alter bridge init order") which added a NULL
check. However, even though we were no longer crashing the end result
was that we weren't actually powering the panel on when we thought we
were. Things could end up working (despite warning splats) if
userspace was persistent and tried to get the mode again, but it
wasn't great.

A bit of digging was done to see if there was an easy fix but there
was nothing obvious. Instead, the only device using ps8640 the "old"
way had its DT updated so that the panel was no longer a simple
"platform_deice". See commit c2d94f72140a ("arm64: dts: mediatek:
mt8173-elm: Move display to ps8640 auxiliary bus") and commit
113b5cc06f44 ("arm64: dts: mediatek: mt8173-elm: remove panel model
number in DT").

Let's delete the old broken code so nobody gets tempted to copy it or
figure out how it works (since it doesn't).

NOTE: from a device tree "purist" point of view, we're supposed to
keep old device trees working and this patch is technically "against
policy". Reasons I'm still proposing it anyway:
1. Officially, old mt8173-elm device trees worked via the "little
   white lie" approach. The DT would list an arbitrary/representative
   panel that would be used for power sequencing. The mode information
   in the panel driver would then be ignored / overridden by the EDID
   reading code in ps8640. I don't feel too terrible breaking DTs that
   contained the wrong "compatible" string to begin with. NOTE that
   any old device trees that _didn't_ lie about their compatible will
   still work because the mode information will come from the
   hardcoded panels in panel-edp.
2. The only users of the old code were Chromebooks and Chromebooks
   don't bake their DTs into the BIOS (they are bundled with the
   kernel). Thus we don't need to worry about breaking someone using
   an old DT with a new kernel.
3. The old code was broken anyway. If someone wants to fix the old
   code instead of deleting it then they have my blessing, but without
   a proper fix the old code isn't useful.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616165517.v2.1.I7b8f60b3fbfda068f9bf452d584dc934494bfbfa@changeid

drm/kms: log when querying an object not included in lease

User-space may query an existing object not included in a lease.
Make it easier to debug such situations by logging a debug message.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230623143514.38707-1-contact@emersion.fr

drm/atomic: log errors in drm_mode_atomic_ioctl()

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-7-contact@emersion.fr

drm/atomic: log when page-flip is requested without CRTCs

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-6-contact@emersion.fr

drm/atomic: log on attempt to set legacy DPMS property

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-5-contact@emersion.fr

drm/atomic: log when CRTC_ID prop value is invalid

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-4-contact@emersion.fr

drm/atomic: log when getting/setting unknown properties

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-3-contact@emersion.fr

drm/atomic: drop extra bracket from log messages

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-2-contact@emersion.fr

drm/atomic: log drm_atomic_replace_property_blob_from_id() errors

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143736.267324-1-contact@emersion.fr

drm/bridge_connector: use drm_kms_helper_connector_hotplug_event()

This adds more information to the hotplug uevent and lets user-space
know that it's about a particular connector only.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620175506.263109-1-contact@emersion.fr

drm/sysfs: rename drm_sysfs_connector_status_event()

Rename drm_sysfs_connector_status_event() to
drm_sysfs_connector_property_event(). Indeed, "status" is a bit
vague: it can easily be confused with the connected/disconnected
status of the connector. This function has nothing to do with
connected/disconnected: it merely sends a notification that a
connector's property has changed (e.g. HDCP, privacy screen, etc).

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Manasi Navare <navaremanasi@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620174231.260335-1-contact@emersion.fr

drm: fix code style for embedded structs in hdr_metadata_infoframe

Only the stuff inside the brackets should be indented.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428100115.9802-1-contact@emersion.fr

drm/mgag200: set variable mgag200_modeset storage-class-specifier to static

smatch reports
drivers/gpu/drm/mgag200/mgag200_drv.c:23:5: warning: symbol
  'mgag200_modeset' was not declared. Should it be static?

This variable is only used in its defining file, so it should be static

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230517134140.874179-1-trix@redhat.com

drm: bridge: dw-mipi-dsi: Fix enable/disable of DSI controller

Before this patch, booting to Linux VT and doing a simple:

  echo 2 > /sys/class/graphics/fb0/blank
  echo 0 > /sys/class/graphics/fb0/blank

would result in failures to re-enable the panel. Mode set callback is
called only once during boot in this scenario, while calls to
enable/disable callbacks are balanced afterwards. The driver doesn't
work unless userspace calls modeset before enabling the CRTC/connector.

This patch moves enabling of the DSI host from mode_set into pre_enable
callback, and removes some old hacks where this bridge driver is
directly calling into other bridge driver's callbacks.

pre_enable_prev_first flag is set on the panel's bridge so that panel
drivers will get their prepare function called between DSI host's
pre_enable and enable callbacks, so that they get a chance to
perform panel setup while DSI host is already enabled in command
mode. Otherwise panel's prepare would be called before DSI host
is enabled, and any DSI communication used in prepare callback
would fail.

With all these changes, the enable/disable sequence is now well
balanced, and host's and panel's callbacks are called in proper order
documented in the drm_panel API documentation without needing the old
hacks. (Mainly that panel->prepare is called when DSI host is ready to
allow the panel driver to send DSI commands and vice versa during
disable.)

Tested on Pinephone Pro. Trace of the callbacks follows.

Before:

[    1.253882] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.290732] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.475576] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.475593] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   13.722799] panel-himax-hx8394 ff960000.dsi.0: disable
[   13.774502] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   13.774526] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   17.735796] panel-himax-hx8394 ff960000.dsi.0: prepare
[   17.923522] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   17.923540] panel-himax-hx8394 ff960000.dsi.0: enable
[   17.944330] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[   17.944335] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[   17.944340] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

echo 2 > /sys/class/graphics/fb0/blank

[  431.148583] panel-himax-hx8394 ff960000.dsi.0: disable
[  431.169259] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  431.169268] panel-himax-hx8394 ff960000.dsi.0: Failed to enter sleep mode: -110
[  431.169282] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[  431.169316] panel-himax-hx8394 ff960000.dsi.0: unprepare
[  431.169357] pclk_mipi_dsi0 already disabled

echo 0 > /sys/class/graphics/fb0/blank

[  432.796851] panel-himax-hx8394 ff960000.dsi.0: prepare
[  432.981537] dw-mipi-dsi-rockchip ff960000.dsi: enable
[  432.981568] panel-himax-hx8394 ff960000.dsi.0: enable
[  433.002290] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  433.002299] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[  433.002312] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

-----------------------------------------------------------------------

After:

[    1.248372] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.248704] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[    1.285377] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.468392] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.468421] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   16.210357] panel-himax-hx8394 ff960000.dsi.0: disable
[   16.261315] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   16.261339] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   19.161453] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[   19.197869] panel-himax-hx8394 ff960000.dsi.0: prepare
[   19.382141] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   19.382158] panel-himax-hx8394 ff960000.dsi.0: enable

       (But depends on functionality intorduced in Linux 6.3, so this patch will
        not build on older kernels when applied to older stable branches.)

Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230617224915.1923630-1-megi@xff.cz

drm/i2c: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230611202740.826120-1-u.kleine-koenig@pengutronix.de

drm/bridge: tc358762: Handle HS/VS polarity

Add support for handling the HS/VS sync signals polarity in the bridge
driver, otherwise e.g. DSIM bridge feeds the TC358762 inverted polarity
sync signals and the image is shifted to the left, up, and wobbly.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-5-marex@denx.de

drm/bridge: tc358762: Guess the meaning of LCDCTRL bits

The register content and behavior is very similar to TC358764 VP_CTRL.
All the bits except for unknown bit 6 also seem to match, even though
the datasheet is just not available. Add a comment and reuse the bit
definitions.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-4-marex@denx.de

drm/bridge: tc358762: Instruct DSI host to generate HSE packets

This bridge seems to need the HSE packet, otherwise the image is
shifted up and corrupted at the bottom. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-3-marex@denx.de

drm/bridge: tc358762: Switch to atomic ops

Switch the bridge driver over to atomic ops. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-2-marex@denx.de

drm/bridge: tc358762: Split register programming from pre-enable to enable

Move the register programming part, which actually enables the bridge and
makes it push data out of its DPI side, into the enable callback. The DSI
host like DSIM may not be able to transmit commands in pre_enable, moving
the register programming into enable assures it can transmit commands.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-1-marex@denx.de

drm/bridge: tc358764: Use BIT() macro for actual bits

None of these four bits are bitfields, use BIT() macro and treat
them as bits. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201635.565973-1-marex@denx.de

drm/shmem-helper: Switch to reservation lock

Replace all drm-shmem locks with a GEM reservation lock. This makes locks
consistent with dma-buf locking convention where importers are responsible
for holding reservation lock for all operations performed over dma-bufs,
preventing deadlock between dma-buf importers and exporters.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-7-dmitry.osipenko@collabora.com

dma-buf: Change locking policy for mmap()

Change locking policy of mmap() callback, making exporters responsible
for handling dma-buf reservation locking. Previous locking policy stated
that dma-buf is locked for both importers and exporters by the dma-buf
core, which caused a deadlock problem for DRM drivers in a case of
self-imported dma-bufs which required to take the lock from the DRM
exporter side.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-6-dmitry.osipenko@collabora.com

drm: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares DRM
drivers for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com

udmabuf: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares udmabuf
for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-4-dmitry.osipenko@collabora.com

dma-buf/heaps: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem
solved by moving the lock down to exporters. This patch prepares dma-buf
heaps for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-3-dmitry.osipenko@collabora.com

media: videobuf2: Don't assert held reservation lock for dma-buf mmapping

Don't assert held dma-buf reservation lock on memory mapping of exported
buffer.

We're going to change dma-buf mmap() locking policy such that exporters
will have to handle the lock. The previous locking policy caused deadlock
problem for DRM drivers in a case of self-imported dma-bufs once these
drivers are moved to use reservation lock universally. The problem is
solved by moving the lock down to exporters. This patch prepares videobuf2
for the locking policy update.

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529223935.2672495-2-dmitry.osipenko@collabora.com

MAINTAINERS: Add myself as reviewer for mgag200 and ast drivers

I've contributed to these two drivers, fixing bugs and performance
issues.

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530142615.57014-1-jfalempe@redhat.com

drm/bridge: lt9611uxc: Add MODULE_FIRMWARE macro

The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620061254.1210248-1-juerg.haefliger@canonical.com

drm/vkms: Fix all kernel-doc warnings of the vkms_composer file

Fix the following warnings:

drivers/gpu/drm/vkms/vkms_composer.c:42: warning: Function parameter or member 'frame_info' not described in 'pre_mul_alpha_blend'
drivers/gpu/drm/vkms/vkms_composer.c:42: warning: Excess function parameter 'src_frame_info' description in 'pre_mul_alpha_blend'
drivers/gpu/drm/vkms/vkms_composer.c:93: warning: Cannot understand  * @wb_frame_info: The writeback frame buffer metadata
 on line 93 - I thought it was a doc line

by correcting variable names and adding function name.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230508220030.434118-2-mcanal@igalia.com

drm/vkms: Add kernel-doc to the function vkms_compose_row()

The function vkms_compose_row() was introduced in the code without any
documentation. In order to make the function more clear, add a
kernel-doc to it.

Suggested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230508220030.434118-1-mcanal@igalia.com

drm/amdgpu: Remove struct drm_driver.gem_prime_mmap

The callback struct drm_driver.gem_prime_mmap as been removed in
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").
Do not assign to it. The assigned function, drm_gem_prime_mmap(), is
now the default for the operation, so there is no change in functionality.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230619141129.2002-1-tzimmermann@suse.de

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: Remove struct drm_driver.gem_prime_mmap

All drivers initialize this field with drm_gem_prime_mmap(). Call
the function directly and remove the field. Simplifies the code and
resolves a long-standing TODO item.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-3-tzimmermann@suse.de

drm/msm: Initialize mmap offset after constructing the buffer object

Only the msm driver provides its own implementation of gem_prime_mmap
from struct drm_driver. All other drivers use the drm_gem_prime_mmap()
helper.

Initialize the mmap offset when constructing the buffer object in msm
and reduce the gem_prime_mmap code to the generic helper. Prepares
msm for the removal of struct drm_driver.gem_prime_mmap.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-2-tzimmermann@suse.de

MAINTAINERS: Update info for TI display drivers

Add drm-misc as the git tree for tilcdc and omapdrm. Change Tomi's email
to point to ideasonboard.com instead of kernel.org.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230619082323.20575-1-tomi.valkeinen@ideasonboard.com

drm/tidss: Add support for AM625 DSS

Add support for the DSS controller on TI's AM625 SoC in the tidss
driver.

The AM625 DSS supports 2 video planes connecting to 2 video ports.
The first plane is a full plane supporting all the features, while the
2nd plane is a "lite" plane without scaling support.

The first video port in AM625 DSS internally provides DPI output to 2
OLDI transmitters. Each OLDI TX outputs 4 differential lanes of video
output and 1 of clock output.

This patch does not automatically enable the OLDI features of AM625 yet.
That support for OLDI will be added subsequently.

The second video port outputs DPI data directly out of the SoC. It has
24 data lines and can support a maximum of RGB888 output bus format.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616150900.6617-3-a-bhatia1@ti.com

dt-bindings: display: ti,am65x-dss: Add am625 dss compatible

The DSS controller on TI's AM625 SoC is an update from that on TI's
AM65X SoC. The former has an additional OLDI TX on its first video port
that helps output cloned video or WUXGA (1920x1200@60fps) resolution
video output over a dual-link mode to reduce the required OLDI clock
output.

The second video port is same from AM65x DSS and it outputs DPI video
data. It can support 2K resolutions @ 60fps, independently.

Add the new controller's compatible and update descriptions.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616150900.6617-2-a-bhatia1@ti.com

Merge tag 'drm-msm-next-2023-06-18' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.5.. this includes a backmerg of drm-next tree to be able
to use new DRM DSC helpers.

Core:
+ Add Marijn Suijten as drm/msm reviewer
+ Adreno A660 bindings
+ SM8350 MDSS bindings fix
+ Fix adreno_is_a690() warnings
+ More generic (DRM) and MSM-specific DSC helpers

DP:
+ Removed obsolete USB-PD remains
+ Documented DP compatible string for sm8550 platform

DPU:
+ Enable missing features (DSPP, DSC, split display) on sc8180x,
  sc8280xp, sm8450
+ Enabled writeback on sc7280
+ Implemented tearcheck support to support vsync on SM150 and
  newer platforms
+ Native HDMI output support
+ Dropped unused features: regdma, GC, IGC
+ Fixed the DSC flush operations
+ Simplified QoS handling, removing obsolete and unused features
  and merging SSPP and WB code paths
+ Reworked dpu_encoder initialisation path
+ Enabled DSPP support on sdm845
+ Disabled color-management if DSPP blocks are not available
+ Added support for DSC 1.2 blocks found on sm8350 and later
+ Added .fb_dirty to fix CMD panels

DSI:
+ Drop powerup quirks in favour of using pre_enable_prev_first for
  downstream bridges
+ Fixed 14nm DSI PHY programming
+ Added support for DSI and 28nm DSI PHY on MSM8226 platform
+ Make use of DRM and MSM DSC helpers

MDP5:
+ Added support for display controller on MSM8226 platform

GPU:
+ A690 support
+ Don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA on devices with coherent SMMU
  (like A690)
+ Move cmdstream dumping out of fence signaling path
+ Cleanups
+ Support for a6xx devices without GMU (aka "GMU wrapper"
+ a610 support
+ a619_holi support (a619 variant without GMU)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsUB=tRB4nR6ZCJMuLhro5zN3BQWUSywVYbaipqqDZ_cQ@mail.gmail.com

Backmerge tag 'v6.4-rc7' of git://git./linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'amd-drm-next-6.5-2023-06-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.5-2023-06-16:

amdgpu:
- Misc display fixes
- W=1 fixes
- Improve scheduler naming
- DCN 3.1.4 fixes
- kdoc fixes
- Enable W=1
- VCN 4.0 fix
- xgmi fixes
- TOPDOWN fix for large BAR systems
- eDP fix
- PSR fixes
- SubVP fixes
- Freesync fix
- DPIA fix
- SMU 13.0.5 fixes
- vblflash fix
- RAS fixes
- SDMA 4 fix
- BO locking fix
- BO backing store fix
- NBIO 7.9 fixes
- GC 9.4.3 fixes
- GPU reset recovery fixes
- HMM fix

amdkfd:
- Fix NULL check
- Trap fixes
- Queue count fix
- Add event age tracking

radeon:
- fbdev client fix

scheduler:
- Avoid an infinite loop

UAPI:
- Add KFD event age tracking:
  Proposed ROCT-Thunk-Interface:
  https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/efdbf6cfbc026bd68ac3c35d00dacf84370eb81e
  https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/1820ae0a2db85b6f584611dc0cde1a00e7c22915
  Proposed ROCR-Runtime:
  https://github.com/RadeonOpenCompute/ROCR-Runtime/compare/master...zhums:ROCR-Runtime:new_event_wait_review
  https://github.com/RadeonOpenCompute/ROCR-Runtime/commit/e1f5bdb88eb882ac798aeca2c00ea3fbb2dba459
  https://github.com/RadeonOpenCompute/ROCR-Runtime/commit/7d26afd14107b5c2a754c1a3f415d89f3aabb503

drm:
- DP MST fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616163548.7706-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2023-06-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * Fix fbdev initializer macros

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615114009.GA27261@linux-uq9g

Linux 6.4-rc7

drm/msm/a6xx: Add A610 speedbin support

A610 is implemented on at least three SoCs: SM6115 (bengal), SM6125
(trinket) and SM6225 (khaje). Trinket does not support speed binning
(only a single SKU exists) and we don't yet support khaje upstream.
Hence, add a fuse mapping table for bengal to allow for per-chip
frequency limiting.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542780/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add A619_holi speedbin support

A619_holi is implemented on at least two SoCs: SM4350 (holi) and SM6375
(blair). This is what seems to be a first occurrence of this happening,
but it's easy to overcome by guarding the SoC-specific fuse values with
of_machine_is_compatible(). Do just that to enable frequency limiting
on these SoCs.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542772/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching

Before transitioning to using per-SoC and not per-Adreno speedbin
fuse values (need another patchset to land elsewhere), a good
improvement/stopgap solution is to use adreno_is_aXYZ macros in
place of explicit revision matching. Do so to allow differentiating
between A619 and A619_holi.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542777/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Use "else if" in GPU speedbin rev matching

The GPU can only be one at a time. Turn a series of ifs into if +
elseifs to save some CPU cycles.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542770/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Fix some A619 tunables

Adreno 619 expects some tunables to be set differently. Make up for it.

Fixes: b7616b5c69e6 ("drm/msm/adreno: Add A619 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542782/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add A610 support

A610 is one of (if not the) lowest-tier SKUs in the A6XX family. It
features no GMU, as it's implemented solely on SoCs with SMD_RPM.
What's more interesting is that it does not feature a VDDGX line
either, being powered solely by VDDCX and has an unfortunate hardware
quirk that makes its reset line broken - after a couple of assert/
deassert cycles, it will hang for good and will not wake up again.

This GPU requires mesa changes for proper rendering, and lots of them
at that. The command streams are quite far away from any other A6XX
GPU and hence it needs special care. This patch was validated both
by running an (incomplete) downstream mesa with some hacks (frames
rendered correctly, though some instructions made the GPU hangcheck
which is expected - garbage in, garbage out) and by replaying RD
traces captured with the downstream KGSL driver - no crashes there,
ever.

Add support for this GPU on the kernel side, which comes down to
pretty simply adding A612 HWCG tables, altering a few values and
adding a special case for handling the reset line.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542779/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add support for A619_holi

A619_holi is a GMU-less variant of the already-supported A619 GPU.
It's present on at least SM4350 (holi) and SM6375 (blair). No mesa
changes are required. Add the required kernel-side support for it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542775/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations

A610 and A619_holi don't support the feature. Disable it to make the GPU stop
crashing after almost each and every submission - the received data on
the GPU end was simply incomplete in garbled, resulting in almost nothing
being executed properly. Extend the disablement to adreno_has_gmu_wrapper,
as none of the GMU wrapper Adrenos that don't support yet seem to feature it.

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542774/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Introduce GMU wrapper support

Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs
but don't implement the associated GMUs. This is due to the fact that
the GMU directly pokes at RPMh. Sadly, this means we have to take care
of enabling & scaling power rails, clocks and bandwidth ourselves.

Reuse existing Adreno-common code and modify the deeply-GMU-infused
A6XX code to facilitate these GPUs. This involves if-ing out lots
of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's
the actual name that Qualcomm uses in their downstream kernels).

This is essentially a register region which is convenient to model
as a device. We'll use it for managing the GDSCs. The register
layout matches the actual GMU_CX/GX regions on the "real GMU" devices
and lets us reuse quite a bit of gmu_read/write/rmw calls.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542766/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Move CX GMU power counter enablement to hw_init

Since the introduction of A6xx support, we've been enabling the CX GMU
power counter 0 in a bit of a weird spot. Move it to hw_init so that
GMU wrapper GPUs can reuse the same code paths. As a bonus, this order
makes it easier to compare mainline and downstream register access traces.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542765/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Extend and explain UBWC config

Rename lower_bit to hbb_lo and explain what it signifies.
Add explanations (wherever possible to other tunables).

Port setting min_access_length, ubwc_mode and hbb_hi from downstream.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542764/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init

Currently we're only deasserting REG_A6XX_RBBM_GBIF_HALT, but we also
need REG_A6XX_GBIF_HALT to be set to 0.

This is typically done automatically on successful GX collapse, but in
case that fails, we should take care of it.

Also, add a memory barrier to ensure it's gone through before jumping
to further initialization.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542760/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add a helper for software-resetting the GPU

Introduce a6xx_gpu_sw_reset() in preparation for adding GMU wrapper
GPUs and reuse it in a6xx_gmu_force_off().

This helper, contrary to the original usage in GMU code paths, adds
a readback+delay sequence to ensure that the reset is never deasserted
too quickly due to e.g. OoO execution going crazy.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542758/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()

Unify the indentation and explain the cryptic 0xF value.

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542756/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu

This function is responsible for telling the GPU to halt transactions
on all of its relevant buses, drain them and leave them in a predictable
state, so that the GPU can be e.g. reset cleanly.

Move the function to a6xx_gpu.c, remove the static keyword and add a
prototype in a6xx_gpu.h to accomodate for the move.

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542762/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()

As pointed out by Akhil during the review process of GMU wrapper
introduction [1], it makes sense to move this write into the function
that's responsible for forcibly shutting the GMU off.

It is also very convenient to move this to GMU-specific code, so that
it does not have to be guarded by an if-condition to avoid calling it
on GMU wrapper targets.

Move the write to the aforementioned a6xx_gmu_force_off() to achieve
that. No effective functional change.

[1] https://lore.kernel.org/linux-arm-msm/20230501194022.GA18382@akhilpo-linux.qualcomm.com/

Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542752/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Remove static keyword from sptprac en/disable functions

These two will be reused by at least A619_holi in the non-gmu
paths. Turn them non-static them to make it possible.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542751/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno: Use adreno_is_revn for A690

The adreno_is_revn rework came at the same time as A690 introduction
and that resulted in it not covering all cases. Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542754/
Signed-off-by: Rob Clark <robdclark@chromium.org>

dt-bindings: display/msm/gmu: Add GMU wrapper

The "GMU Wrapper" is Qualcomm's name for "let's treat the GPU blocks
we'd normally assign to the GMU as if they were a part of the GMU, even
though they are not". It's a (good) software representation of the GMU_CX
and GMU_GX register spaces within the GPUSS that helps us programatically
treat these de-facto GMU-less parts in a way that's very similar to their
GMU-equipped cousins, massively saving up on code duplication.

The "wrapper" register space was specifically designed to mimic the layout
of a real GMU, though it rather obviously does not have the M3 core et al.

To sum it all up, the GMU wrapper is essentially a register space within
the GPU, which Linux sees as a dumbed-down regular GMU: there's no clocks,
interrupts, multiple reg spaces, iommus and OPP. Document it.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542750/
Signed-off-by: Rob Clark <robdclark@chromium.org>

dt-bindings: display/msm: gpu: Document GMU wrapper-equipped A6xx

The "GMU Wrapper" is Qualcomm's name for "let's treat the GPU blocks
we'd normally assign to the GMU as if they were a part of the GMU, even
though they are not". It's a (good) software representation of the GMU_CX
and GMU_GX register spaces within the GPUSS that helps us programatically
treat these de-facto GMU-less parts in a way that's very similar to their
GMU-equipped cousins, massively saving up on code duplication.

The "wrapper" register space was specifically designed to mimic the layout
of a real GMU, though it rather obviously does not have the M3 core et al.

GMU wrapper-equipped A6xx GPUs require clocks and clock-names to be
specified under the GPU node, just like their older cousins. Account
for that.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542748/
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers: three fairly obvious small ones and a
  large one in aacraid to add block queue completion mapping and fix a
  CPU offline hang"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path
  scsi: target: core: Fix error path in target_setup_session()
  scsi: storvsc: Always set no_report_opcodes
  scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity

Merge tag 'ata-6.4-rc7' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fix from Damien Le Moal:

 - Avoid deadlocks on resume from sleep by delaying scsi rescan until
   the scsi device is also fully resumed.

* tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-scsi: Avoid deadlock on rescan after device resume

Merge tag 'parisc-for-6.4-4' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:

 - Drop redundant register definitions to fix build with latest binutils

* tag 'parisc-for-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Delete redundant register definitions in <asm/assembly.h>

mm/mmap: Fix error path in do_vmi_align_munmap()

The error unrolling was leaving the VMAs detached in many cases and
leaving the locked_vm statistic altered, and skipping the unrolling
entirely in the case of the vma tree write failing.

Fix the error path by re-attaching the detached VMAs and adding the
necessary goto for the failed vma tree write, and fix the locked_vm
statistic by only updating after the vma tree write succeeds.

Fixes: 763ecb035029 ("mm: remove the vma linked list")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ata: libata-scsi: Avoid deadlock on rescan after device resume

When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().

However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.

Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.

Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>

drm/ingenic: Kconfig: select REGMAP and REGMAP_MMIO

Otherwise its failed to pass basic compile test on platform without
REGMAP_MMIO selected by defconfig

make -j$(nproc) ARCH=mips CROSS_COMPILE=mips64el-linux-gnuabi64-

  SYNC    include/config/auto.conf.cmd
  Checking missing-syscalls for N32
  CALL    scripts/checksyscalls.sh
  Checking missing-syscalls for O32
  CALL    scripts/checksyscalls.sh
  CALL    scripts/checksyscalls.sh
  MODPOST Module.symvers
ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/gpu/drm/ingenic/ingenic-drm.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:136: Module.symvers] Error 1
make: *** [Makefile:1978: modpost] Error 2

V2: Order alphabetically

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607110650.569522-1-suijingfeng@loongson.cn

Merge tag 'staging-6.4-rc7' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fix from Greg KH:
 "Here is a single staging driver "fix" for 6.4-rc7. I've been sitting
  on it in my tree for many weeks as it is just a simple documentation
  update, with the hope that maybe some other staging driver fixes would
  need to be merged for 6.4-final, but that does not seem to be the
  case.

  So please, pull in this one documentation update so that Aaro doesn't
  get emails going forward that he can't do anything about"

* tag 'staging-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: octeon: delete my name from TODO contact

Merge tag 'usb-6.4-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes and new device
  ids for 6.4-rc7 to resolve some reported problems. Included in here
  are:

   - new USB serial device ids

   - USB gadget core fixes for long-dissussed problems

   - dwc3 bugfixes for reported issues.

   - typec driver fixes

   - thunderbolt driver fixes

  All of these have been in linux-next this week with no reported issues"

* tag 'usb-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: core: Prevent soft_connect_store() race
  usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  usb: typec: Fix fast_role_swap_current show function
  usb: typec: ucsi: Fix command cancellation
  USB: dwc3: fix use-after-free on core driver unbind
  USB: dwc3: qcom: fix NULL-deref on suspend
  usb: dwc3: gadget: Reset num TRBs before giving back the request
  usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} error
  USB: serial: option: add Quectel EM061KGL series
  thunderbolt: Mask ring interrupt on Intel hardware as well
  thunderbolt: Do not touch CL state configuration during discovery
  thunderbolt: Increase DisplayPort Connection Manager handshake timeout
  thunderbolt: dma_test: Use correct value for absent rings when creating paths

Merge tag 'tty-6.4-rc7' of git://git./linux/kernel/git/gregkh/tty

Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.4-rc7 that resolve some
  reported problems:

   - lantiq serial driver irq fix

   - fsl_lpuart serial driver watermark fix

  Both of these have been in linux-next this week with no reported issues"

* tag 'tty-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A
  serial: lantiq: add missing interrupt ack

parisc: Delete redundant register definitions in <asm/assembly.h>

We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:

arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined

Delete the duplicate definitions in <asm/assembly.h>.

Also delete the definition of gp, which isn't used anywhere.

Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes:

   - Fix an OOB issue in the Mediatek mt8365 driver where arrays of clks
     are mismatched in size

   - Use the proper clk_ops for a few clks in the Mediatek mt8365 driver

   - Stop using abs() in clk_composite_determine_rate() because 64-bit
     math goes wrong on large unsigned long numbers that are subtracted
     and passed into abs()

   - Zero initialize a struct clk_init_data in clk-loongson2 to avoid
     stack junk confusing clk_hw_register()

   - Actually use a pointer to __iomem for writel() in
     pxa3xx_clk_update_accr() so we don't oops"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: pxa: fix NULL pointer dereference in pxa3xx_clk_update_accr
  clk: clk-loongson2: Zero init clk_init_data
  clk: mediatek: mt8365: Fix inverted topclk operations
  clk: composite: Fix handling of high clock rates
  clk: mediatek: mt8365: Fix index issue

Merge tag 'drm-fixes-2023-06-17' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "A bunch of misc fixes across the board.

  amdgpu is the usual bulk with a revert and other fixes, nouveau has a
  race fix that was causing a UAF that was hard hanging systems,
  otherwise some qaic, bridge and radeon.

  amdgpu:
   - GFX9 preemption fixes
   - Add missing radeon secondary PCI ID
   - vblflash fixes
   - SMU 13 fix
   - VCN 4.0 fix
   - Re-enable TOPDOWN flag for large BAR systems to fix regression
   - eDP fix
   - PSR hang fix
   - DPIA fix

  radeon:
   - fbdev client warning fix

  qaic:
   - leak fix
   - null ptr deref fix

  nouveau:
   - use-after-free caused by fence race fix
   - runtime pm fix
   - NULL ptr checks

  bridge:
   - ti-sn65dsi86: Avoid possible buffer overflow"

* tag 'drm-fixes-2023-06-17' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  nouveau: fix client work fence deletion race
  drm/amd/display: limit DPIA link rate to HBR3
  drm/amd/display: fix the system hang while disable PSR
  drm/amd/display: edp do not add non-edid timings
  Revert "drm/amdgpu: remove TOPDOWN flags when allocating VRAM in large bar system"
  drm/amdgpu: vcn_4_0 set instance 0 init sched score to 1
  drm/radeon: Disable outputs when releasing fbdev client
  drm/amd/pm: workaround for compute workload type on some skus
  drm/amd: Tighten permissions on VBIOS flashing attributes
  drm/amd: Make sure image is written to trigger VBIOS image update flow
  drm/amdgpu: add missing radeon secondary PCI ID
  drm/amdgpu: Implement gfx9 patch functions for resubmission
  drm/amdgpu: Modify indirect buffer packages for resubmission
  drm/amdgpu: Program gds backup address as zero if no gds allocated
  drm/nouveau: add nv_encoder pointer check for NULL
  drm/amdgpu: Reset CP_VMID_PREEMPT after trailing fence signaled
  drm/nouveau/dp: check for NULL nv_connector->native_mode
  drm/bridge: ti-sn65dsi86: Avoid possible buffer overflow
  drm/nouveau: don't detect DSM for non-NVIDIA device
  accel/qaic: Fix NULL pointer deref in qaic_destroy_drm_device()
  ...

afs: Fix vlserver probe RTT handling

In the same spirit as commit ca57f02295f1 ("afs: Fix fileserver probe
RTT handling"), don't rule out using a vlserver just because there
haven't been enough packets yet to calculate a real rtt.  Always set the
server's probe rtt from the estimate provided by rxrpc_kernel_get_srtt,
which is capped at 1 second.

This could lead to EDESTADDRREQ errors when accessing a cell for the
first time, even though the vl servers are known and have responded to a
probe.

Fixes: 1d4adfaf6574 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2023-June/006746.html
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'drm-misc-fixes-2023-06-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes maybe in time for v6.4-rc7:
- qaic leak and null deref fix.
- Fix runtime pm in nouveau.
- Fix array overflow in ti-sn65dsi86 pwm chip handling.
- Assorted null check fixes in nouveau.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patchwork.freedesktop.org/patch/msgid/641eb8a8-fbd7-90ad-0805-310b7fec9344@lankhorst.se

Merge tag 'for-6.4-rc6-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "Two fixes for NOCOW files, a regression fix in scrub and an assertion
  fix:

   - NOCOW fixes:
      - keep length of iomap direct io request in case of a failure
      - properly pass mode of extent reference checking, this can break
        some cases for swapfile

   - fix error value confusion when scrubbing a stripe

   - convert assertion to a proper error handling when loading global
     roots, reported by syzbot"

* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: fix a return value overwrite in scrub_stripe()
  btrfs: do not ASSERT() on duplicated global roots
  btrfs: can_nocow_file_extent should pass down args->strict from callers
  btrfs: fix iomap_begin length for nocow writes

Merge tag 'block-6.4-2023-06-15' of git://git.kernel.dk/linux

Pull block fix from Jens Axboe:
 "Just a single fix for blk-cg stats flushing"

* tag 'block-6.4-2023-06-15' of git://git.kernel.dk/linux:
  blk-cgroup: Flush stats before releasing blkcg_gq

Merge tag 'io_uring-6.4-2023-06-15' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
 "A fix for sendmsg with CMSG, and the followup fix discussed for
  avoiding touching task->worker_private after the worker has started
  exiting"

* tag 'io_uring-6.4-2023-06-15' of git://git.kernel.dk/linux:
  io_uring/io-wq: clear current->worker_private on exit
  io_uring/net: save msghdr->msg_control for retries

Merge tag 'sound-6.4-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes. The only change to the core code is for a
  minor race in ALSA OSS sequencer, and the rest are all device-specific
  fixes (regression fixes and a usual quirk)"

* tag 'sound-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback
  ALSA: usb-audio: Fix broken resume due to UAC3 power state
  ALSA: seq: oss: Fix racy open/close of MIDI devices
  ASoC: tegra: Fix Master Volume Control
  ALSA: hda/realtek: Add a quirk for Compaq N14JP6
  firmware: cs_dsp: Log correct region name in bin error messages

Merge tag 'urgent-rcu.2023.06.11a' of git://git./linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This fixes a spinlock-initialization regression in SRCU that causes
  the SRCU notifier to fail.

  The fix simply adds the initialization, but introduces a #ifdef
  because there is no spinlock to initialize for the Tiny SRCU used in
  !SMP builds.

  Yes, it would be nice to abstract this somehow in order to hide it in
  SRCU, but I still don't see a good way of doing this"

* tag 'urgent-rcu.2023.06.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  notifier: Initialize new struct srcu_usage field

Merge tag 'riscv-for-linus-6.4-rc7' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fix from Palmer Dabbelt:

 - A documentation patch describing how we use patchwork

* tag 'riscv-for-linus-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Documentation: RISC-V: patch-acceptance: mention patchwork's role

drm/bridge: tc358764: Fix debug print parameter order

The debug print parameters were swapped in the output and they were
printed as decimal values, both the hardware address and the value.
Update the debug print to print the parameters in correct order, and
use hexadecimal print for both address and value.

Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615152817.359420-1-marex@denx.de

drm/msm/dsi: split dsi_ctrl_config() function

It makes no sense to pass NULL parameters to dsi_ctrl_config() in the
disable case. Split dsi_ctrl_config() into enable and disable parts and
drop unused params.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542559/
Link: https://lore.kernel.org/r/20230614224402.296825-2-dmitry.baryshkov@linaro.org

drm/msm/dsi: dsi_host: drop unused clocks

Several source clocks are not used anymore, so stop handling them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542558/
Link: https://lore.kernel.org/r/20230614224402.296825-1-dmitry.baryshkov@linaro.org

drm/msm/dpu: remove unused INTF_NONE interfaces

sm6115, sm6375 and qcm2290 do not have INTF_0. Drop corresponding
interface definitions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542180/
Link: https://lore.kernel.org/r/20230613001004.3426676-4-dmitry.baryshkov@linaro.org

drm/msm/dpu: correct MERGE_3D length

Each MERGE_3D block has just two registers. Correct the block length
accordingly.

Fixes: 4369c93cf36b ("drm/msm/dpu: initial support for merge3D hardware block")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/542177/
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230613001004.3426676-3-dmitry.baryshkov@linaro.org

drm/msm/dpu: fix sc7280 and sc7180 PINGPONG done interrupts

During IRQ conversion we have lost the PP_DONE interrupts for sc7280
platform. This was left unnoticed, because this interrupt is only used
for CMD outputs and probably no sc7[12]80 systems use DSI CMD panels.

Fixes: 667e9985ee24 ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542175/
Link: https://lore.kernel.org/r/20230613001004.3426676-2-dmitry.baryshkov@linaro.org

Merge tag 'asoc-fix-v6.4-rc6-2' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.4

A couple more fixes for v6.4, one fixing a misleading error log and
another stopping us seeing spurious failures setting the master volume
on some Tegra systems introduced by a change to how we calculate delay
times.

ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback

This commit adds new DEVICE_FLG with QUIRK_FLAG_DSD_RAW and Vendor Id for
HEM devices which supports native DSD. Prior to this change Linux kernel
was not enabling native DSD playback for HEM devices, and as a result,
DSD audio was being converted to PCM "on the fly". HEM devices,
when connected to the system, would only play audio in PCM format,
even if the source material was in DSD format. With the addition of new
VENDOR_FLG in the quircks.c file, the devices are now correctly
recognized, and raw DSD data is transmitted to the device,
allowing for native DSD playback.

Signed-off-by: Lukasz Tyl <ltyl@hem-e.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230614122524.30271-1-ltyl@hem-e.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>