Hans Verkuil [Thu, 19 Apr 2012 14:28:05 +0000 (16:28 +0200)]
v4l2-ctl: add support for integer menus.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Thu, 19 Apr 2012 14:21:02 +0000 (16:21 +0200)]
v4l2-compliance: add tests for control events.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Thu, 19 Apr 2012 14:20:11 +0000 (16:20 +0200)]
videodev2.h: update to latest version.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Thu, 19 Apr 2012 10:49:07 +0000 (12:49 +0200)]
ioctl-test: update to the latest list of ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Gregor Jasny [Sat, 14 Apr 2012 21:12:15 +0000 (23:12 +0200)]
dvb: Fix spelling errors found by lintian
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sat, 14 Apr 2012 16:46:23 +0000 (18:46 +0200)]
libv4lconvert: Revert X201 upside down table entry
Disabled due to http://bugs.debian.org/667958
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Mauro Carvalho Chehab [Mon, 9 Apr 2012 21:25:01 +0000 (18:25 -0300)]
dvb-file: Allow writing a zap/channel file for a DVBv5-only standard
ISDB-T is not really supported by a DVB-T format. Yet, DVB-T tools
are able to work with with an ISDB-T frontend in compat mode.
So, while the conversion to a legacy format is not a rocket science,
it is interesting to allow writing/converting a DVB-T file for an
ISDB-T scan file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 9 Apr 2012 20:13:28 +0000 (17:13 -0300)]
dvb-format-convert: fix argument check and helper message
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ville Skyttä [Mon, 9 Apr 2012 07:03:53 +0000 (09:03 +0200)]
Documentation spelling fixes
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Robert Abel [Sat, 25 Feb 2012 17:12:38 +0000 (18:12 +0100)]
libv4lconvert: Use bytesperline instead of width
Basically, I found that libv4l and its conversion functions usually
choose to ignore v4l2_pix_format.bytesperline, which seems to work out
most of the time.
I'm currently working with the mt9v032 camera on a Gumstix Overo board.
The mt9v032's driver pads output lines to 768 pixels, giving 0x900 bytes
per line. All code in bayer.c (the camera uses raw bayer pattern) is
written to assume bytesperline = width and thus everything goes horribly
wrong.
Anyway, the patch for bayer => rgb as well as bayer => yuv is attached.
Basically, every time where width was assumed to be the offset to the
neighboring pixel below, now step is used.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Hans de Goede [Sun, 8 Apr 2012 09:27:52 +0000 (11:27 +0200)]
libv4lconver: Add 06f8:301b pac7302 based cam to the quirk table
Reported-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jean-Francois Moine [Fri, 23 Mar 2012 19:19:45 +0000 (20:19 +0100)]
tinyjpeg: Better luminance quantization table for Pixart JPEG
An other luminance quantization table gives a better quality to the
Pixart images created by the webcams handled by the gspca drivers
pac7302 and pac7311 (pixel format 'PJPG').
Tests have been done with 5 different pac7302 webcams. The marker was
always 0x44.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Hans de Goede [Sat, 7 Apr 2012 14:40:48 +0000 (16:40 +0200)]
libv4lconvert: Fix building when configured with --without-jpeg
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Sat, 7 Apr 2012 14:31:12 +0000 (16:31 +0200)]
libv4lconver/tinyjpeg: Fix out of bounds array usage
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Gregor Jasny [Fri, 6 Apr 2012 15:06:16 +0000 (17:06 +0200)]
libv4l2: Prevent GCC 4.7 inlining error
See: http://bugs.debian.org/667406
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Fri, 6 Apr 2012 14:56:00 +0000 (16:56 +0200)]
dvb: Fix help and version strings
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Mon, 2 Apr 2012 19:21:59 +0000 (21:21 +0200)]
libv4lconvert: Add LIFEBOOK T731 to upside down table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Hans Verkuil [Fri, 30 Mar 2012 09:57:39 +0000 (11:57 +0200)]
v4l2-ctl/dbg: include config.h for --log-status.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Gregor Jasny [Sun, 25 Mar 2012 20:44:59 +0000 (22:44 +0200)]
libv4lconvert: Add ThinkPad Edge E325 to upside down table
Gregor Jasny [Thu, 22 Mar 2012 21:05:14 +0000 (22:05 +0100)]
Add ThinkPad X201 to upside down table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Thu, 22 Mar 2012 21:01:47 +0000 (22:01 +0100)]
Add ThinkPad X200 to upside down table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Robert Abel [Sat, 25 Feb 2012 14:48:46 +0000 (15:48 +0100)]
libv4l: Miscellaneous Comment Fixes
I found some minor spelling/grammar issues in the comments of libv4l. I
fixed the most irksome to me in the patch below.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Hans Verkuil [Fri, 24 Feb 2012 12:10:29 +0000 (13:10 +0100)]
v4l2-ctl: add decoder/encoder_cmd support.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Fri, 24 Feb 2012 10:27:31 +0000 (11:27 +0100)]
videodev2.h: update to latest version.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Gregor Jasny [Mon, 13 Feb 2012 14:35:06 +0000 (15:35 +0100)]
qv4l2: Use int64_t instead of __off64_t
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Mon, 13 Feb 2012 14:35:07 +0000 (15:35 +0100)]
buildsystem: Convert pattern rules to portable make rules
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sun, 19 Feb 2012 17:42:56 +0000 (18:42 +0100)]
v4l2-ctl: Explicitely compare struct timespec members on (k)FreeBSD
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sun, 19 Feb 2012 17:38:47 +0000 (18:38 +0100)]
utils: Remove unused features.h include
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sun, 19 Feb 2012 17:47:38 +0000 (18:47 +0100)]
utils: Enable v4l2-compliance, v4l2-ctl, and v4l2-dbg again
An updated v4l_compat tarball provides all necessary defines and structs.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Tue, 14 Feb 2012 19:27:57 +0000 (20:27 +0100)]
libv4lconvert: Fix printf conversion modifier
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Tue, 14 Feb 2012 08:35:31 +0000 (09:35 +0100)]
v4l2-ctl: Remove unneeded linux/types.h header include
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Tue, 14 Feb 2012 08:34:35 +0000 (09:34 +0100)]
libdvb5: Fix printf conversion modifier
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Tue, 14 Feb 2012 19:25:52 +0000 (20:25 +0100)]
utils: use klogctl only if available
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Tue, 14 Feb 2012 19:21:37 +0000 (20:21 +0100)]
libv4l: Check for correct mode_t promotion type at configure time
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 8 Feb 2012 20:12:03 +0000 (21:12 +0100)]
Do not use v4l-utils copy of kernel headers on non Linux architectures
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sun, 5 Feb 2012 17:31:36 +0000 (18:31 +0100)]
libv4l: Apply conditionals for FreeBSD to kFreeBSD, too
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 1 Feb 2012 17:41:33 +0000 (18:41 +0100)]
buildsystem: Build some of the utils only on Linux
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 1 Feb 2012 17:41:32 +0000 (18:41 +0100)]
buildsystem: Find argp library during configure run
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 1 Feb 2012 17:41:29 +0000 (18:41 +0100)]
buildsystem: Find library providing dlopen symbols at configure time
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 1 Feb 2012 17:41:30 +0000 (18:41 +0100)]
Add missing includes
They were discovered while compiling on FreeBSD.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 1 Feb 2012 17:41:31 +0000 (18:41 +0100)]
utils: Rename devname to devicename to avoid FreeBSD stdlib conflict
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 1 Feb 2012 17:41:36 +0000 (18:41 +0100)]
libv4lconvert: add missing const for input pointer
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sun, 5 Feb 2012 16:09:55 +0000 (17:09 +0100)]
libv4l: update upside down device table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Thu, 2 Feb 2012 19:25:07 +0000 (20:25 +0100)]
libv4lconvert: replace strndupa with more portable strndup
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Thu, 2 Feb 2012 19:37:02 +0000 (20:37 +0100)]
Prepare 0.9.0-test1 release
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Wed, 1 Feb 2012 21:06:33 +0000 (22:06 +0100)]
libv4lconvert: Add missing colon in ASUS upside down table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Tue, 31 Jan 2012 19:59:24 +0000 (20:59 +0100)]
Use globs to shorten ASUS upside down table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
CC: Hans de Goede <hdegoede@redhat.com>
Gregor Jasny [Sun, 29 Jan 2012 22:39:54 +0000 (23:39 +0100)]
libv4l: update upside down device table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sun, 29 Jan 2012 16:56:04 +0000 (17:56 +0100)]
libv4lcontrol: Add new matching algorithm for upside down table
Implemented after this proposal from Hans de Goede:
Add another matching algorithm, besides the current match all fields if single row algorithm
to be specific, I would like a 3 step matching algorithm first of all match the dmi_board_vendor
against a list of strings known to be used by Manufacturer A, then match dmi_board_name against
a list of known to have upside down laptop models, then match the usb-id against a list of
webcams known to be used by Manufacturer A.
This is mainly targeting Asus, since they tend to have many models and sometimes change the
model webcam used inside a certain model notebook.
This way we can hopefully define a set of rules which will catch most Asus laptops, including
models we have not seen yet, without catching the few models which do have their laptop the right
way up.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Gregor Jasny [Sun, 29 Jan 2012 16:47:06 +0000 (17:47 +0100)]
libv4lcontrol: Prefix sysfs root with environment variable value
If the LIBV4LCONTROL_SYSFS_PREFIX value is set it will be added
as a prefix to the sysfs root. This allows to fake USB and DMI
values to test upside down table entries.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Hans Verkuil [Sat, 28 Jan 2012 12:00:49 +0000 (13:00 +0100)]
v4l2-ctl: add support for VIDIOC_S_HW_FREQ_SEEK.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Mauro Carvalho Chehab [Wed, 25 Jan 2012 10:57:33 +0000 (08:57 -0200)]
dvbv5-scan: Don't process the same freq from channel file twice
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 20:03:51 +0000 (18:03 -0200)]
dvbv5-scan: Allow changing the default output file
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 20:01:59 +0000 (18:01 -0200)]
dvb-file: Fix a segfault if network_name is not filled
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 19:54:29 +0000 (17:54 -0200)]
dvb-fe-tool: Fix two warnings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 19:03:14 +0000 (17:03 -0200)]
Add the missing license comments to the files
While everything is GPLv2 only, the license were missed on
some files. Properly fill them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 17:28:51 +0000 (15:28 -0200)]
dvb: Use the generic read/write file functions
This way, on every place, it is possible to read or write using
the legacy or the new formats.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 17:00:59 +0000 (15:00 -0200)]
dvb: Move the generic read/write routines to the library
Instead of having them only for dvb-format-convert, move them
to the library. This way, they can be used by the other tools.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 15:52:30 +0000 (13:52 -0200)]
dvb-file: Add support for writing at the legacy formats
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 14:00:00 +0000 (12:00 -0200)]
dvb-file: improve parser description structures
Move delimiter to a parser structure. This will allow adding a
generic routine to create one-line formats.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 24 Jan 2012 11:11:53 +0000 (09:11 -0200)]
dvb: Add support for SCR/Unicable
SCR/Unicable is used with Ku-Band satellite configurations, in order
to allow several devices to use the satellites at the same time.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 24 Jan 2012 09:17:14 +0000 (10:17 +0100)]
v4l2-compliance: improve capability compliance tests.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Tue, 24 Jan 2012 07:51:00 +0000 (08:51 +0100)]
v4l2-ctl: add support for device capabilities.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Tue, 24 Jan 2012 07:32:11 +0000 (08:32 +0100)]
videodev2.h: update to latest version.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Chris Pockele [Sun, 8 Jan 2012 22:31:35 +0000 (22:31 +0000)]
v4l-utils: ir-keytable file parsing errors
While configuring a remote control I noticed that the ir-keytable
utility would throw the message "Invalid parameter on line 1" if the
first line following the "table ... type: ..." line is a comment.
Also, if a configuration line is invalid, the line number indication
of the error message is sometimes incorrect, because the comments
before it are not counted.
This happens because of the "continue" statement when processing
comments (or the table/type line), thus skipping the line counter
increase at the end of the loop. The included patch fixes both
problems by making sure the counter is always increased.
The parse_cfgfile() function had a similar problem.
Signed-off-by: Chris Pockelé <chris.pockele.f1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 23 Jan 2012 11:30:48 +0000 (09:30 -0200)]
configure.ac: don't be verbose by default
libtool builds are too verbose for it to be useful. Be less verbose
by default. If verbose is needed, it can be enabled easily via
$ make V=1
at the commandline.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 23 Jan 2012 11:22:00 +0000 (09:22 -0200)]
descriptors: Fix a few bugs at the tables
As pointed by clang, previous array values were overriden.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 23 Jan 2012 11:16:07 +0000 (09:16 -0200)]
descriptors: Fix DVB-T2 transmission mode parsing
$ make V=0 CC=clang
descriptors.c:515:65: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
nit_table->transmission_mode = transmission_mode[(buf[1] >> 2) && 0x07];
Reported-by: Gregor Jasny <gjasny@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Gregor Jasny [Thu, 19 Jan 2012 13:42:43 +0000 (14:42 +0100)]
keytable: Fix copy and paste error for SANYO IR protocol
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 18 Jan 2012 12:45:49 +0000 (10:45 -0200)]
dvb: Fix a few warnings
Now that the compilation is not verbose anymore, it is possible
to see a few warnings and fix them:
dvb-file.c: In function 'fill_entry':
dvb-file.c:213:27: warning: unused variable 'v' [-Wunused-variable]
descriptors.c: In function 'parse_NIT_ISDBT':
descriptors.c:278:4: warning: format '%d' expects argument of type 'int', but argument 2 has type 'uint64_t' [-Wformat]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 18 Jan 2012 12:41:26 +0000 (10:41 -0200)]
autotools: allow enabling the silent-rules
With this change, it is now possible to do:
$ make V=0
or
$ ./configure --enable-silent-rules
in order to be less verbose.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Tue, 17 Jan 2012 18:45:42 +0000 (18:45 +0000)]
dvbv5-scan: bugfix possible crash by parsing strings
PID 0x0010, TableID 0x40 ID=0x3001, version 4, size 132
40 f0 81 30 01 c9 00 00 f0 26 40 18 44 56 42 2d
54 20 42 65 72 6c 69 6e 2f 42 72 61 6e 64 65 6e
62 75 72 67 6c 0a 01 01 49 9a 08 89 21 01 ec 00
f0 4e 01 01 21 14 f0 24 5a 0b 04 10 a6 40 1f 41
12 ff ff ff ff 6d 07 01 01 04 10 a6 40 00 41 0c
00 02 01 00 41 01 00 61 01 00 81 01 01 02 21 14
f0 1e 5a 0b 03 1c 82 40 1f 41 12 ff ff ff ff 41
0f 00 0b 01 00 0c 01 00 0d 01 00 0e 01 00 0f 01
5a 5e 75 59
section_length = 129 section 0, last section 0
Descriptors table len 38
network_name_descriptor (0x40), len 24
44 56 42 2d 54 20 42 65 72 6c 69 6e 2f 42 72 61
6e 64 65 6e 62 75 72 67
*** glibc detected *** ./dvbv5-scan: free(): invalid pointer: 0x0000000000618dc0 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x74c06)[0x7ffe9b15dc06]
./dvbv5-scan[0x407ba6]
./dvbv5-scan[0x407339]
./dvbv5-scan[0x405c7e]
./dvbv5-scan[0x4067d3]
./dvbv5-scan[0x401749]
/lib64/libc.so.6(__libc_start_main+0xed)[0x7ffe9b10a23d]
./dvbv5-scan[0x401dd5]
======= Memory map: ========
00400000-
0040e000 r-xp
00000000 08:03
15084544 /home/stefan/build/dvb_utils/v4l-utils/utils/dvb/dvbv5-scan
0060d000-
0060e000 r--p
0000d000 08:03
15084544 /home/stefan/build/dvb_utils/v4l-utils/utils/dvb/dvbv5-scan
0060e000-
00610000 rw-p
0000e000 08:03
15084544 /home/stefan/build/dvb_utils/v4l-utils/utils/dvb/dvbv5-scan
00610000-
00631000 rw-p
00000000 00:00 0 [heap]
7ffe9acd0000-
7ffe9ace5000 r-xp
00000000 08:03
15859816 /lib64/libgcc_s.so.1
7ffe9ace5000-
7ffe9aee4000 ---p
00015000 08:03
15859816 /lib64/libgcc_s.so.1
7ffe9aee4000-
7ffe9aee5000 r--p
00014000 08:03
15859816 /lib64/libgcc_s.so.1
7ffe9aee5000-
7ffe9aee6000 rw-p
00015000 08:03
15859816 /lib64/libgcc_s.so.1
7ffe9aee6000-
7ffe9aee8000 r-xp
00000000 08:03
59904690 /usr/lib64/gconv/ISO8859-1.so
7ffe9aee8000-
7ffe9b0e7000 ---p
00002000 08:03
59904690 /usr/lib64/gconv/ISO8859-1.so
7ffe9b0e7000-
7ffe9b0e8000 r--p
00001000 08:03
59904690 /usr/lib64/gconv/ISO8859-1.so
7ffe9b0e8000-
7ffe9b0e9000 rw-p
00002000 08:03
59904690 /usr/lib64/gconv/ISO8859-1.so
7ffe9b0e9000-
7ffe9b26e000 r-xp
00000000 08:03
15859719 /lib64/libc-2.14.1.so
7ffe9b26e000-
7ffe9b46e000 ---p
00185000 08:03
15859719 /lib64/libc-2.14.1.so
7ffe9b46e000-
7ffe9b472000 r--p
00185000 08:03
15859719 /lib64/libc-2.14.1.so
7ffe9b472000-
7ffe9b473000 rw-p
00189000 08:03
15859719 /lib64/libc-2.14.1.so
7ffe9b473000-
7ffe9b478000 rw-p
00000000 00:00 0
7ffe9b478000-
7ffe9b498000 r-xp
00000000 08:03
15859714 /lib64/ld-2.14.1.so
7ffe9b671000-
7ffe9b674000 rw-p
00000000 00:00 0
7ffe9b68e000-
7ffe9b68f000 rw-p
00000000 00:00 0
7ffe9b68f000-
7ffe9b696000 r--s
00000000 08:03
59904753 /usr/lib64/gconv/gconv-modules.cache
7ffe9b696000-
7ffe9b698000 rw-p
00000000 00:00 0
7ffe9b698000-
7ffe9b699000 r--p
00020000 08:03
15859714 /lib64/ld-2.14.1.so
7ffe9b699000-
7ffe9b69a000 rw-p
00021000 08:03
15859714 /lib64/ld-2.14.1.so
7ffe9b69a000-
7ffe9b69b000 rw-p
00000000 00:00 0
7fffab429000-
7fffab44a000 rw-p
00000000 00:00 0 [stack]
7fffab51c000-
7fffab51d000 r-xp
00000000 00:00 0 [vdso]
ffffffffff600000-
ffffffffff601000 r-xp
00000000 00:00 0 [vsyscall]
Abgebrochen
localhost:/home/stefan/build/dvb_utils/v4l-utils/utils/dvb #
Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 17 Jan 2012 17:28:07 +0000 (15:28 -0200)]
descriptors: Fix a few NIT descriptor parsers
The ISDB-T terrestrial delivery system descripotr parser were
completely broken. Fix it.
While here, also fixes the DVB-T2 descriptor parser.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 17 Jan 2012 15:54:01 +0000 (13:54 -0200)]
dvb/dvb-file: Try again after a while, if -EAGAIN is returned
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 17 Jan 2012 15:56:56 +0000 (13:56 -0200)]
dvbv5-scan: Don't parse the other NIT/SDT tables by default
This speeds up scanning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 17 Jan 2012 15:47:30 +0000 (13:47 -0200)]
dvb/descriptors: improve ISDB-T verbosity
On ISDB-T, most of the network parameters are decoded via the TMCC
carrier, modulated on all segments using DBPSK. It is up to the
ISDB-T demod to parse the TMCC registers and pass their contents via
get_frontend().
Yet, the NIT table provides a few data:
ISDB-T mode (1, 2 or 3);
Guard interval.
The ISDB-T mode is directly related to the number of OFDM carriers,
and the IFFT size:
Mode 1 corresponds to an IFFT size of 2K;
Mode 2 corresponds to an IFFT size of 4K;
Mode 3 corresponds to an IFFT size of 8K.
Provide a better output of those data, if verbose mode is enabled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 17 Jan 2012 12:04:43 +0000 (10:04 -0200)]
dvb: Fix the used parameters for ISDB-T
Remove the DVB-T parameters that aren't used on ISDB-T.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 17 Jan 2012 10:58:29 +0000 (08:58 -0200)]
dvbv5-scan: Avoid demux open/close every time
Instead of opening/closing the demux everytime, just open it
once, before starting the scanning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 17 Jan 2012 10:21:02 +0000 (08:21 -0200)]
dvbv5-scan: Fix the parsing for the timeout parameter
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Gregor Jasny [Sun, 15 Jan 2012 22:12:39 +0000 (23:12 +0100)]
libv4l: update upside down device table
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Mauro Carvalho Chehab [Sun, 15 Jan 2012 23:47:42 +0000 (21:47 -0200)]
utils/DVB/README: Improve comments
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 15 Jan 2012 23:41:48 +0000 (21:41 -0200)]
dvbv5-scan: Fix report for non-PAT service ID's
Noticed several scrambled channels on my DVB-C network that don't
appear properly at PAT/PMT tables. Probably, some other table
is needed (CAT?). Anyway, fix the output of such services.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 15 Jan 2012 23:19:03 +0000 (21:19 -0200)]
dvbv5-scan: Fix print message on nameless service ID's
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 15 Jan 2012 23:18:20 +0000 (21:18 -0200)]
descriptors.c: don't print an error for 0x83 descriptor on PMT
Removes a bogus error message on DVB-C.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 15 Jan 2012 23:11:13 +0000 (21:11 -0200)]
utils/dvb/dvbv5-scan: optimize it for the delivery systems
The repetition time of the MPEG-TS tables are different
for each delivery system. Improves the code that handles that,
by using different timeouts, acording with the delivery system.
Also, start parsing the other NIT/SDT tables for most
delivery systems.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 15 Jan 2012 23:10:17 +0000 (21:10 -0200)]
utils/dvb/parse_string: Fix a wrong cut-and-paste
While here, cleanup the malloc's for the temp tables.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Gregor Jasny [Sat, 14 Jan 2012 16:09:36 +0000 (17:09 +0100)]
buildsystem: Convert to autotools buildsystem
Use autoreconf -vfi to bootstrap
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Gregor Jasny [Sat, 14 Jan 2012 14:49:13 +0000 (15:49 +0100)]
Fix spelling error in manpage
Gregor Jasny [Sat, 14 Jan 2012 14:43:56 +0000 (15:43 +0100)]
Disable fancy upsampling (needed for libjpeg >= 7)
Libv4lconvert expects to receive downsampled data. With
jpeglib 7 the default changed to TRUE. So we have to
explicitely request downsampled data after reading the
JPEG header.
Thanks to Guido Vollbeding for pointing this out.
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 14:41:53 +0000 (12:41 -0200)]
dvbv5-scan: Remove spurious transponder duplication
There's an algorithm to remove duplicated frequencies.
However, due to the zigzag tuning, the same channel
or transponder might appear with two different values.
Improves the code to also handle such case, by estimating
the needed bandwidth for each channel, and considering
any frequency shift bellow bandwitdh/8 as belonging to
the same channel/transponder.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 14:11:45 +0000 (12:11 -0200)]
utils/libscan: read other pid's also for types 0x05 and 0x06
While here, fix a bug at the verbose printk, thanks for Stefan
to report it.
Reported-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 13:44:20 +0000 (11:44 -0200)]
usb/descriptors: Add ISO/IEC 13818-1:2007 descriptors
Add the descriptors found at ISO/IEC 13818-1:2007. Some of them
were also defined on ARIB/ABNT ISDB-T specs, so remove the
duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 11:59:06 +0000 (09:59 -0200)]
dvb: add proper support for AC-3 audio
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 03:13:38 +0000 (01:13 -0200)]
dvb: add support for read/writing the other el PID
Instead of just supporting audio and video, add support to write
the other PID's to the file, in a generic way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 14 Jan 2012 02:22:58 +0000 (00:22 -0200)]
dvbv5-zap: Fix a few warnings
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 23:28:00 +0000 (21:28 -0200)]
dvbv5-zap: Accepty any number of audio and video PID's
Instead of working with just one video and just one audio,
allows zapping to a service with 0 or more audio/video
pid's.
Currently, just one audio or video pid will be filtered.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 23:09:19 +0000 (21:09 -0200)]
utils/dvb/dvb-file: Allow adding new keys to the file
Don't be too pedantic: if a new key is added, the parser
should not die. Instead, silently ignores it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 22:52:51 +0000 (20:52 -0200)]
dvb/libscan: Fix a bug at service PID handling
Several DVB-C channels had video/audio PID missing, because
the PMT tables for them weren't handled.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 22:32:36 +0000 (20:32 -0200)]
dvbv5-scan: add a parameter to control the usage of other freqs
By default, dvbv5-scan will get other frequencies from the
DVB NIT tables and use them for scan. A new flag to disable
this behavior is now added, as it helps to test the tool
with DVB-C.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 13 Jan 2012 22:27:19 +0000 (20:27 -0200)]
dvbv5-zap: use argp parser instead of getopt
argp is easier to use and provides a nicer/more standard
arguments parsing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>