Christophe Leroy [Mon, 12 Oct 2020 08:54:33 +0000 (08:54 +0000)]
powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
When _PAGE_ACCESSED is not set, a minor fault is expected.
To do this, TLB miss exception ANDs _PAGE_PRESENT and _PAGE_ACCESSED
into the L2 entry valid bit.
To simplify the processing and reduce the number of instructions in
TLB miss exceptions, manage it as an APG bit and get it next to
_PAGE_GUARDED bit to allow a copy in one go. Then declare the
corresponding groups as handling all accesses as user accesses.
As the PP bits always define user as No Access, it will generate
a fault.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/80f488db230c6b0e7b3b990d72bd94a8a069e93e.1602492856.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 12 Oct 2020 08:54:31 +0000 (08:54 +0000)]
powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
This adds at least 3 instructions to the TLB miss exception
handlers fast path. Following patch will reduce this overhead.
Also update the rotation instruction to the correct number of bits
to reflect all changes done to _PAGE_ACCESSED over time.
Fixes:
d069cb4373fe ("powerpc/8xx: Don't touch ACCESSED when no SWAP.")
Fixes:
5f356497c384 ("powerpc/8xx: remove unused _PAGE_WRITETHRU")
Fixes:
e0a8e0d90a9f ("powerpc/8xx: Handle PAGE_USER via APG bits")
Fixes:
5b2753fc3e8a ("powerpc/8xx: Implementation of PAGE_EXEC")
Fixes:
a891c43b97d3 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu
Christophe Leroy [Sat, 10 Oct 2020 15:14:29 +0000 (15:14 +0000)]
powerpc/40x: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
Fixes:
2c74e2586bb9 ("powerpc/40x: Rework 40x PTE access and TLB miss")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02ca2ed2d3676a096219b48c0f69ec982a75bcf.1602342801.git.christophe.leroy@csgroup.eu
Christophe Leroy [Sat, 10 Oct 2020 15:14:30 +0000 (15:14 +0000)]
powerpc/603: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
Fixes:
84de6ab0e904 ("powerpc/603: don't handle PAGE_ACCESSED in TLB miss handlers.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a44367744de54e2315b2f1a8cbbd7f88488072e0.1602342806.git.christophe.leroy@csgroup.eu
Rafael J. Wysocki [Thu, 5 Nov 2020 12:26:02 +0000 (13:26 +0100)]
Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-opp' and 'powercap'
* pm-cpufreq:
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
* pm-cpuidle:
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
* pm-opp:
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
* powercap:
powercap/intel_rapl: remove unneeded semicolon
Geoffrey D. Bennett [Wed, 4 Nov 2020 11:57:17 +0000 (22:27 +1030)]
ALSA: usb-audio: Add implicit feedback quirk for Qu-16
This patch fixes audio distortion on playback for the Allen&Heath
Qu-16.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104115717.GA19046@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Darrick J. Wong [Tue, 3 Nov 2020 01:14:07 +0000 (17:14 -0800)]
xfs: only flush the unshared range in xfs_reflink_unshare
There's no reason to flush an entire file when we're unsharing part of
a file. Therefore, only initiate writeback on the selected range.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Heiner Kallweit [Tue, 3 Nov 2020 17:52:18 +0000 (18:52 +0100)]
r8169: work around short packet hw bug on RTL8125
Network problems with RTL8125B have been reported [0] and with help
from Realtek it turned out that this chip version has a hw problem
with short packets (similar to RTL8168evl). Having said that activate
the same workaround as for RTL8168evl.
Realtek suggested to activate the workaround for RTL8125A too, even
though they're not 100% sure yet which RTL8125 versions are affected.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839
Fixes:
0439297be951 ("r8169: add support for RTL8125B")
Reported-by: Maxim Plotnikov <wgh@torlan.ru>
Tested-by: Maxim Plotnikov <wgh@torlan.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Ellerman [Wed, 4 Nov 2020 11:17:42 +0000 (22:17 +1100)]
powerpc: Use asm_goto_volatile for put_user()
Andreas reported that commit
ee0a49a6870e ("powerpc/uaccess: Switch
__put_user_size_allowed() to __put_user_asm_goto()") broke
CLONE_CHILD_SETTID.
Further inspection showed that the put_user() in schedule_tail() was
missing entirely, the store not emitted by the compiler.
<.schedule_tail>:
mflr r0
std r0,16(r1)
stdu r1,-112(r1)
bl <.finish_task_switch>
ld r9,2496(r3)
cmpdi cr7,r9,0
bne cr7,<.schedule_tail+0x60>
ld r3,392(r13)
ld r9,1392(r3)
cmpdi cr7,r9,0
beq cr7,<.schedule_tail+0x3c>
li r4,0
li r5,0
bl <.__task_pid_nr_ns>
nop
bl <.calculate_sigpending>
nop
addi r1,r1,112
ld r0,16(r1)
mtlr r0
blr
nop
nop
nop
bl <.__balance_callback>
b <.schedule_tail+0x1c>
Notice there are no stores other than to the stack. There should be a
stw in there for the store to current->set_child_tid.
This is only seen with GCC 4.9 era compilers (tested with 4.9.3 and
4.9.4), and only when CONFIG_PPC_KUAP is disabled.
When CONFIG_PPC_KUAP=y, the inline asm that's part of the isync()
and mtspr() inlined via allow_user_access() seems to be enough to
avoid the bug.
We already have a macro to work around this (or a similar bug), called
asm_volatile_goto which includes an empty asm block to tickle the
compiler into generating the right code. So use that.
With this applied the code generation looks more like it will work:
<.schedule_tail>:
mflr r0
std r31,-8(r1)
std r0,16(r1)
stdu r1,-144(r1)
std r3,112(r1)
bl <._mcount>
nop
ld r3,112(r1)
bl <.finish_task_switch>
ld r9,2624(r3)
cmpdi cr7,r9,0
bne cr7,<.schedule_tail+0xa0>
ld r3,2408(r13)
ld r31,1856(r3)
cmpdi cr7,r31,0
beq cr7,<.schedule_tail+0x80>
li r4,0
li r5,0
bl <.__task_pid_nr_ns>
nop
li r9,-1
clrldi r9,r9,12
cmpld cr7,r31,r9
bgt cr7,<.schedule_tail+0x80>
lis r9,16
rldicr r9,r9,32,31
subf r9,r31,r9
cmpldi cr7,r9,3
ble cr7,<.schedule_tail+0x80>
li r9,0
stw r3,0(r31) <-- stw
nop
bl <.calculate_sigpending>
nop
addi r1,r1,144
ld r0,16(r1)
ld r31,-8(r1)
mtlr r0
blr
nop
bl <.__balance_callback>
b <.schedule_tail+0x30>
Fixes:
ee0a49a6870e ("powerpc/uaccess: Switch __put_user_size_allowed() to __put_user_asm_goto()")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201104111742.672142-1-mpe@ellerman.id.au
Ryan Kosta [Sun, 11 Oct 2020 03:03:51 +0000 (20:03 -0700)]
risc-v: kernel: ftrace: Fixes improper SPDX comment style
Signed-off-by: Ryan Kosta <ryanpkosta@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Daniele Palmas [Tue, 3 Nov 2020 12:44:25 +0000 (13:44 +0100)]
USB: serial: option: add Telit FN980 composition 0x1055
Add the following Telit FN980 composition:
0x1055: tty, adb, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Jeff Layton [Mon, 12 Oct 2020 13:39:06 +0000 (09:39 -0400)]
ceph: check session state after bumping session->s_seq
Some messages sent by the MDS entail a session sequence number
increment, and the MDS will drop certain types of requests on the floor
when the sequence numbers don't match.
In particular, a REQUEST_CLOSE message can cross with one of the
sequence morphing messages from the MDS which can cause the client to
stall, waiting for a response that will never come.
Originally, this meant an up to 5s delay before the recurring workqueue
job kicked in and resent the request, but a recent change made it so
that the client would never resend, causing a 60s stall unmounting and
sometimes a blockisting event.
Add a new helper for incrementing the session sequence and then testing
to see whether a REQUEST_CLOSE needs to be resent, and move the handling
of CEPH_MDS_SESSION_CLOSING into that function. Change all of the
bare sequence counter increments to use the new helper.
Reorganize check_session_state with a switch statement. It should no
longer be called when the session is CLOSING, so throw a warning if it
ever is (but still handle that case sanely).
[ idryomov: whitespace, pr_err() call fixup ]
URL: https://tracker.ceph.com/issues/47563
Fixes:
fa9967734227 ("ceph: fix potential mdsc use-after-free crash")
Reported-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Rob Herring [Fri, 23 Oct 2020 14:52:52 +0000 (09:52 -0500)]
PCI: mvebu: Fix duplicate resource requests
With commit
669cbc708122 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated
into resources when the host bridge is allocated. The resources are
requested as well, but that happens a second time for the mvebu driver in
mvebu_pcie_parse_request_resources(). We should only be requesting the
additional resources added in mvebu_pcie_parse_request_resources(). These
are not added by default because they use custom properties rather than
standard DT address translation.
Also, the bus ranges was also populated by default, so we can remove it
from mvebu_pci_host_probe().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729
Fixes:
669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org
Reported-by: vtolkm@googlemail.com
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>
Rob Herring [Mon, 26 Oct 2020 15:48:52 +0000 (10:48 -0500)]
PCI: dwc: Restore ATU memory resource setup to use last entry
Prior to commit
0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"),
the DWC driver was setting up the last memory resource rather than the
first memory resource. This doesn't matter for most platforms which only
have 1 memory resource, but it broke Tegra194 which has a 2nd
(prefetchable) memory region that requires an ATU entry. The first region
on Tegra194 relies on the default 1:1 pass-thru of outbound transactions
and doesn't need an ATU entry.
Fixes:
0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.org
Reported-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Jakub Kicinski [Wed, 4 Nov 2020 18:36:37 +0000 (10:36 -0800)]
Merge tag 'linux-can-fixes-for-5.10-
20201103' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-03
The first two patches are by Oleksij Rempel and they add a generic
can-controller Device Tree yaml binding and convert the text based binding
of the flexcan driver to a yaml based binding.
Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN
core.
A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload
helper.
Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in
hard IRQ context in can_get_echo_skb().
Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames
in the __can_get_echo_skb() helper.
Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in
can_create_echo_skb().
Yegor Yefremov contributes 4 patches to enhance the j1939 documentation.
Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind()
if the netdev is down.
Then there are three patches for the newly added CAN_ISOTP protocol. Geert
Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds
missing RX timeout handling in listen-only mode and Colin Ian King's patch
decreases the generated object code by 926 bytes.
Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the
error path in the probe function.
Navid Emamdoost's patch for the xilinx_can driver fixes the error handling
in case of failing pm_runtime_get_sync().
There are two patches for the peak_usb driver. Dan Carpenter adds range
checking in decode operations and Stephane Grosjean's patch fixes
a timestamp wrapping problem.
Stephane Grosjean's patch for th peak_canfd driver fixes echo management if
loopback is on.
The next three patches all target the mcp251xfd driver. The first one is
by me and it increased the severity of CRC read error messages. The kernel
test robot removes an unneeded semicolon and Tom Rix removes unneeded
break in several switch-cases.
The last 4 patches are by Joakim Zhang and target the flexcan driver,
the first three fix ECC related device specific quirks for the LS1021A,
LX2160A and the VF610 SoC. The last patch disable wakeup completely upon
driver remove.
* tag 'linux-can-fixes-for-5.10-
20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits)
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
can: j1939: j1939_sk_bind(): return failure if netdev is down
can: j1939: use backquotes for code samples
can: j1939: swap addr and pgn in the send example
can: j1939: fix syntax and spelling
can: j1939: rename jacd tool
...
====================
Link: https://lore.kernel.org/r/<20201103220636.972106-1-mkl@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhao Qiang [Tue, 3 Nov 2020 02:05:46 +0000 (10:05 +0800)]
spi: fsl-dspi: fix wrong pointer in suspend/resume
Since commit
530b5affc675 ("spi: fsl-dspi: fix use-after-free in
remove path"), this driver causes a "NULL pointer dereference"
in dspi_suspend/resume.
This is because since this commit, the drivers private data point to
"dspi" instead of "ctlr", the codes in suspend and resume func were
not modified correspondly.
Fixes:
530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201103020546.1822-1-qiang.zhao@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Codrin Ciubotariu [Wed, 4 Nov 2020 15:57:38 +0000 (17:57 +0200)]
ASoC: mchp-spdiftx: Do not set Validity bit(s)
The Validity bits (bit 28) must not be set in order to have the samples
valid. Some controllers look for this bit and ignore the samples if it
is set.
Fixes:
06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201104155738.68403-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pavel Begunkov [Wed, 4 Nov 2020 13:39:31 +0000 (13:39 +0000)]
io_uring: fix overflowed cancel w/ linked ->files
Current io_match_files() check in io_cqring_overflow_flush() is useless
because requests drop ->files before going to the overflow list, however
linked to it request do not, and we don't check them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 3 Nov 2020 19:19:07 +0000 (12:19 -0700)]
io_uring: drop req/tctx io_identity separately
We can't bundle this into one operation, as the identity may not have
originated from the tctx to begin with. Drop one ref for each of them
separately, if they don't match the static assignment. If we don't, then
if the identity is a lookup from registered credentials, we could be
freeing that identity as we're dropping a reference assuming it came from
the tctx. syzbot reports this as a use-after-free, as the identity is
still referencable from idr lookup:
==================================================================
BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
BUG: KASAN: use-after-free in __refcount_add include/linux/refcount.h:193 [inline]
BUG: KASAN: use-after-free in __refcount_inc include/linux/refcount.h:250 [inline]
BUG: KASAN: use-after-free in refcount_inc include/linux/refcount.h:267 [inline]
BUG: KASAN: use-after-free in io_init_req fs/io_uring.c:6700 [inline]
BUG: KASAN: use-after-free in io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
Write of size 4 at addr
ffff888011e08e48 by task syz-executor165/8487
CPU: 1 PID: 8487 Comm: syz-executor165 Not tainted 5.10.0-rc1-next-
20201102-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:192
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
io_init_req fs/io_uring.c:6700 [inline]
io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x440e19
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 0f fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fff644ff178 EFLAGS:
00000246 ORIG_RAX:
00000000000001aa
RAX:
ffffffffffffffda RBX:
0000000000000005 RCX:
0000000000440e19
RDX:
0000000000000000 RSI:
000000000000450c RDI:
0000000000000003
RBP:
0000000000000004 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000022b4850
R13:
0000000000000010 R14:
0000000000000000 R15:
0000000000000000
Allocated by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461
kmalloc include/linux/slab.h:552 [inline]
io_register_personality fs/io_uring.c:9638 [inline]
__io_uring_register fs/io_uring.c:9874 [inline]
__do_sys_io_uring_register+0x10f0/0x40a0 fs/io_uring.c:9924
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0x102/0x140 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577
slab_free mm/slub.c:3140 [inline]
kfree+0xdb/0x360 mm/slub.c:4122
io_identity_cow fs/io_uring.c:1380 [inline]
io_prep_async_work+0x903/0xbc0 fs/io_uring.c:1492
io_prep_async_link fs/io_uring.c:1505 [inline]
io_req_defer fs/io_uring.c:5999 [inline]
io_queue_sqe+0x212/0xed0 fs/io_uring.c:6448
io_submit_sqe fs/io_uring.c:6542 [inline]
io_submit_sqes+0x14f6/0x25f0 fs/io_uring.c:6784
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at
ffff888011e08e00
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 72 bytes inside of
96-byte region [
ffff888011e08e00,
ffff888011e08e60)
The buggy address belongs to the page:
page:
00000000a7104751 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x11e08
flags: 0xfff00000000200(slab)
raw:
00fff00000000200 ffffea00004f8540 0000001f00000002 ffff888010041780
raw:
0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e08d00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08d80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>
ffff888011e08e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888011e08e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08f00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
==================================================================
Reported-by: syzbot+625ce3bb7835b63f7f3d@syzkaller.appspotmail.com
Fixes:
1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 2 Nov 2020 17:39:05 +0000 (10:39 -0700)]
io_uring: ensure consistent view of original task ->mm from SQPOLL
Ensure we get a valid view of the task mm, by using task_lock() when
attempting to grab the original task mm.
Reported-by: syzbot+b57abf7ee60829090495@syzkaller.appspotmail.com
Fixes:
2aede0e417db ("io_uring: stash ctx task reference for SQPOLL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 30 Oct 2020 15:37:30 +0000 (09:37 -0600)]
io_uring: properly handle SQPOLL request cancelations
Track if a given task io_uring context contains SQPOLL instances, so we
can iterate those for cancelation (and request counts). This ensures that
we properly wait on SQPOLL contexts, and find everything that needs
canceling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 30 Oct 2020 15:36:41 +0000 (09:36 -0600)]
io-wq: cancel request if it's asking for files and we don't have them
This can't currently happen, but will be possible shortly. Handle missing
files just like we do not being able to grab a needed mm, and mark the
request as needing cancelation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Gleixner [Wed, 4 Nov 2020 13:06:23 +0000 (14:06 +0100)]
entry: Fix the incorrect ordering of lockdep and RCU check
When an exception/interrupt hits kernel space and the kernel is not
currently in the idle task then RCU must be watching.
irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in
turn invokes lockdep when taking a lock. But at that point lockdep does not
yet know about the fact that interrupts have been disabled by the CPU,
which triggers a lockdep splat complaining about inconsistent state.
Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the
point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU.
So use the same sequence as for the idle case and tell lockdep about the
irq state change first, invoke the RCU check and then do the lockdep and
tracer update.
Fixes:
a5497bab5f72 ("entry: Provide generic interrupt entry/exit code")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87y2jhl19s.fsf@nanos.tec.linutronix.de
Darrick J. Wong [Tue, 3 Nov 2020 01:14:07 +0000 (17:14 -0800)]
xfs: fix scrub flagging rtinherit even if there is no rt device
The kernel has always allowed directories to have the rtinherit flag
set, even if there is no rt device, so this check is wrong.
Fixes:
80e4e1268802 ("xfs: scrub inodes")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Tue, 3 Nov 2020 01:14:06 +0000 (17:14 -0800)]
xfs: fix missing CoW blocks writeback conversion retry
In commit
7588cbeec6df, we tried to fix a race stemming from the lack of
coordination between higher level code that wants to allocate and remap
CoW fork extents into the data fork. Christoph cites as examples the
always_cow mode, and a directio write completion racing with writeback.
According to the comments before the goto retry, we want to restart the
lookup to catch the extent in the data fork, but we don't actually reset
whichfork or cow_fsb, which means the second try executes using stale
information. Up until now I think we've gotten lucky that either
there's something left in the CoW fork to cause cow_fsb to be reset, or
either data/cow fork sequence numbers have advanced enough to force a
fresh lookup from the data fork. However, if we reach the retry with an
empty stable CoW fork and a stable data fork, neither of those things
happens. The retry foolishly re-calls xfs_convert_blocks on the CoW
fork which fails again. This time, we toss the write.
I've recently been working on extending reflink to the realtime device.
When the realtime extent size is larger than a single block, we have to
force the page cache to CoW the entire rt extent if a write (or
fallocate) are not aligned with the rt extent size. The strategy I've
chosen to deal with this is derived from Dave's blocksize > pagesize
series: dirtying around the write range, and ensuring that writeback
always starts mapping on an rt extent boundary. This has brought this
race front and center, since generic/522 blows up immediately.
However, I'm pretty sure this is a bug outright, independent of that.
Fixes:
7588cbeec6df ("xfs: retry COW fork delalloc conversion when no extent was found")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Brian Foster [Thu, 29 Oct 2020 21:30:49 +0000 (14:30 -0700)]
iomap: clean up writeback state logic on writepage error
The iomap writepage error handling logic is a mash of old and
slightly broken XFS writepage logic. When keepwrite writeback state
tracking was introduced in XFS in commit
0d085a529b42 ("xfs: ensure
WB_SYNC_ALL writeback handles partial pages correctly"), XFS had an
additional cluster writeback context that scanned ahead of
->writepage() to process dirty pages over the current ->writepage()
extent mapping. This context expected a dirty page and required
retention of the TOWRITE tag on partial page processing so the
higher level writeback context would revisit the page (in contrast
to ->writepage(), which passes a page with the dirty bit already
cleared).
The cluster writeback mechanism was eventually removed and some of
the error handling logic folded into the primary writeback path in
commit
150d5be09ce4 ("xfs: remove xfs_cancel_ioend"). This patch
accidentally conflated the two contexts by using the keepwrite logic
in ->writepage() without accounting for the fact that the page is
not dirty. Further, the keepwrite logic has no practical effect on
the core ->writepage() caller (write_cache_pages()) because it never
revisits a page in the current function invocation.
Technically, the page should be redirtied for the keepwrite logic to
have any effect. Otherwise, write_cache_pages() may find the tagged
page but will skip it since it is clean. Even if the page was
redirtied, however, there is still no practical effect to keepwrite
since write_cache_pages() does not wrap around within a single
invocation of the function. Therefore, the dirty page would simply
end up retagged on the next writeback sequence over the associated
range.
All that being said, none of this really matters because redirtying
a partially processed page introduces a potential infinite redirty
-> writeback failure loop that deviates from the current design
principle of clearing the dirty state on writepage failure to avoid
building up too much dirty, unreclaimable memory on the system.
Therefore, drop the spurious keepwrite usage and dirty state
clearing logic from iomap_writepage_map(), treat the partially
processed page the same as a fully processed page, and let the
imminent ioend failure clean up the writeback state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Brian Foster [Thu, 29 Oct 2020 21:30:48 +0000 (14:30 -0700)]
iomap: support partial page discard on writeback block mapping failure
iomap writeback mapping failure only calls into ->discard_page() if
the current page has not been added to the ioend. Accordingly, the
XFS callback assumes a full page discard and invalidation. This is
problematic for sub-page block size filesystems where some portion
of a page might have been mapped successfully before a failure to
map a delalloc block occurs. ->discard_page() is not called in that
error scenario and the bio is explicitly failed by iomap via the
error return from ->prepare_ioend(). As a result, the filesystem
leaks delalloc blocks and corrupts the filesystem block counters.
Since XFS is the only user of ->discard_page(), tweak the semantics
to invoke the callback unconditionally on mapping errors and provide
the file offset that failed to map. Update xfs_discard_page() to
discard the corresponding portion of the file and pass the range
along to iomap_invalidatepage(). The latter already properly handles
both full and sub-page scenarios by not changing any iomap or page
state on sub-page invalidations.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Brian Foster [Thu, 29 Oct 2020 21:30:48 +0000 (14:30 -0700)]
xfs: flush new eof page on truncate to avoid post-eof corruption
It is possible to expose non-zeroed post-EOF data in XFS if the new
EOF page is dirty, backed by an unwritten block and the truncate
happens to race with writeback. iomap_truncate_page() will not zero
the post-EOF portion of the page if the underlying block is
unwritten. The subsequent call to truncate_setsize() will, but
doesn't dirty the page. Therefore, if writeback happens to complete
after iomap_truncate_page() (so it still sees the unwritten block)
but before truncate_setsize(), the cached page becomes inconsistent
with the on-disk block. A mapped read after the associated page is
reclaimed or invalidated exposes non-zero post-EOF data.
For example, consider the following sequence when run on a kernel
modified to explicitly flush the new EOF page within the race
window:
$ xfs_io -fc "falloc 0 4k" -c fsync /mnt/file
$ xfs_io -c "pwrite 0 4k" -c "truncate 1k" /mnt/file
...
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: 00 00 00 00 00 00 00 00 ........
$ umount /mnt/; mount <dev> /mnt/
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: cd cd cd cd cd cd cd cd ........
Update xfs_setattr_size() to explicitly flush the new EOF page prior
to the page truncate to ensure iomap has the latest state of the
underlying block.
Fixes:
68a9f5e7007c ("xfs: implement iomap based buffered write path")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Jakub Kicinski [Wed, 4 Nov 2020 16:12:52 +0000 (08:12 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
1) Fix packet receiving of standard IP tunnels when the xfrm_interface
module is installed. From Xin Long.
2) Fix a race condition between spi allocating and hash list
resizing. From zhuoliang zhang.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steven Rostedt (VMware) [Mon, 2 Nov 2020 14:17:49 +0000 (09:17 -0500)]
kprobes: Tell lockdep about kprobe nesting
Since the kprobe handlers have protection that prohibits other handlers from
executing in other contexts (like if an NMI comes in while processing a
kprobe, and executes the same kprobe, it will get fail with a "busy"
return). Lockdep is unaware of this protection. Use lockdep's nesting api to
differentiate between locks taken in INT3 context and other context to
suppress the false warnings.
Link: https://lore.kernel.org/r/20201102160234.fa0ae70915ad9e2b21c08b85@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Geoffrey D. Bennett [Wed, 4 Nov 2020 12:07:05 +0000 (22:37 +1030)]
ALSA: usb-audio: Add implicit feedback quirk for MODX
This patch fixes audio distortion on playback for the Yamaha MODX.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Tested-by: Frank Slotta <frank.slotta@posteo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104120705.GA19126@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Artem Lapkin [Tue, 3 Nov 2020 10:08:09 +0000 (18:08 +0800)]
ALSA: usb-audio: add usb vendor id as DSD-capable for Khadas devices
Khadas audio devices ( USB_ID_VENDOR 0x3353 )
have DSD-capable implementations from XMOS
need add new usb vendor id for recognition
Signed-off-by: Artem Lapkin <art@khadas.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201103103311.5435-1-art@khadas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alex Deucher [Fri, 16 Oct 2020 14:25:45 +0000 (10:25 -0400)]
drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE
No need for a separate config option at this point.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 8 Oct 2020 17:32:47 +0000 (13:32 -0400)]
drm/amd/display: Add green_sardine support to DM
Display Manager support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 8 Oct 2020 17:28:41 +0000 (13:28 -0400)]
drm/amd/display: Add green_sardine support to DC
Display Core support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thong Thai [Fri, 15 May 2020 21:02:07 +0000 (17:02 -0400)]
drm/amdgpu: enable vcn support for green_sardine (v2)
Enable Green_Sardine VCN support and VCN firmware loading
v2: use apu flags
Signed-off-by: Thong Thai <thong.thai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aaron Liu [Thu, 1 Oct 2020 21:54:32 +0000 (17:54 -0400)]
drm/amdgpu: enable green_sardine_asd.bin loading (v2)
This patch enable green_sardine_asd.bin loading.
v2: use apu flags
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Wed, 6 Nov 2019 06:12:52 +0000 (14:12 +0800)]
drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)
Initialize the SDMA IP for green_sardine.
v2: use apu flags
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Wed, 6 Nov 2019 05:42:28 +0000 (13:42 +0800)]
drm/amdgpu: add gfx support for green_sardine (v2)
Enable the gfx base HW function of green_sardine.
v2: use apu flags
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Wed, 6 Nov 2019 03:17:02 +0000 (11:17 +0800)]
drm/amdgpu: add soc15 common ip block support for green_sardine (v3)
This patch adds common ip support for green_sardine.
v2: use apu flags, squash in CG/PG enablement
v3: rebase
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Thu, 1 Oct 2020 21:52:15 +0000 (17:52 -0400)]
drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)
This patch adds green_sardine support for gpu_info firmware and ip block setting.
v2: use apu flag
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 15 May 2020 20:32:36 +0000 (16:32 -0400)]
drm/amdgpu: add Green_Sardine APU flag
Will be used for Green_Sardine which is a new APU.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangrui Song [Tue, 3 Nov 2020 01:23:58 +0000 (17:23 -0800)]
x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
Commit
393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions")
added .weak directives to arch/x86/lib/mem*_64.S instead of changing the
existing ENTRY macros to WEAK. This can lead to the assembly snippet
.weak memcpy
...
.globl memcpy
which will produce a STB_WEAK memcpy with GNU as but STB_GLOBAL memcpy
with LLVM's integrated assembler before LLVM 12. LLVM 12 (since
https://reviews.llvm.org/D90108) will error on such an overridden symbol
binding.
Commit
ef1e03152cb0 ("x86/asm: Make some functions local")
changed ENTRY in arch/x86/lib/memcpy_64.S to SYM_FUNC_START_LOCAL, which
was ineffective due to the preceding .weak directive.
Use the appropriate SYM_FUNC_START_WEAK instead.
Fixes:
393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions")
Fixes:
ef1e03152cb0 ("x86/asm: Make some functions local")
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103012358.168682-1-maskray@google.com
Greg Kroah-Hartman [Tue, 3 Nov 2020 08:34:08 +0000 (09:34 +0100)]
Documentation: remove mic/index from misc-devices/index.rst
With the recent removal of the misc/mic/ directory, the documentation
build now warns because we forgot about this index file.
Fix that up so that there are no more warnings here.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Link: https://lore.kernel.org/r/20201103083408.GA2511903@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Sat, 31 Oct 2020 22:54:58 +0000 (23:54 +0100)]
USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
Add following Telit LE910Cx compositions:
0x1203: rndis, tty, adb, tty, tty, tty, tty
0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty
0x1231: rndis, tty, adb, audio, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com
[ johan: add comments after entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Mon, 26 Oct 2020 08:25:48 +0000 (09:25 +0100)]
USB: serial: cyberjack: fix write-URB completion race
The write-URB busy flag was being cleared before the completion handler
was done with the URB, something which could lead to corrupt transfers
due to a racing write request if the URB is resubmitted.
Fixes:
507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Ard Biesheuvel [Sat, 31 Oct 2020 09:43:45 +0000 (11:43 +0200)]
ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations
free_highpages() iterates over the free memblock regions in high
memory, and marks each page as available for the memory management
system.
Until commit
cddb5ddf2b76 ("arm, xtensa: simplify initialization of
high memory pages") it rounded beginning of each region upwards and end of
each region downwards.
However, after that commit free_highmem() rounds the beginning and end of
each region downwards, and we may end up freeing a page that is
memblock_reserve()d, resulting in memory corruption.
Restore the original rounding of the region boundaries to avoid freeing
reserved pages.
Fixes:
cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages")
Link: https://lore.kernel.org/r/20201029110334.4118-1-ardb@kernel.org/
Link: https://lore.kernel.org/r/20201031094345.6984-1-rppt@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Co-developed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
John Clements [Tue, 3 Nov 2020 08:19:44 +0000 (16:19 +0800)]
drm/amdgpu: resolved ASD loading issue on sienna
updated fw header v2 parser to set asd fw memory
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
Kent Russell [Mon, 2 Nov 2020 16:17:59 +0000 (11:17 -0500)]
amdkfd: Check kvmalloc return before memcpy
If we can't kvmalloc the pcrat_image, then we shouldn't memcpy
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 30 Oct 2020 06:22:03 +0000 (14:22 +0800)]
drm/amdgpu: update golden setting for sienna_cichlid
Update golden setting for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Veerabadhran Gopalakrishnan [Thu, 29 Oct 2020 14:29:46 +0000 (19:59 +0530)]
amd/amdgpu: Disable VCN DPG mode for Picasso
Concurrent operation of VCN and JPEG decoder in DPG mode is
causing ring timeout due to power state.
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 3 Nov 2020 23:22:07 +0000 (18:22 -0500)]
drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table
For kernel 5.10, this function was called twice right next to each
other in the same function due to what looks like a mis-merge.
Remove one of them.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eelco Chaudron [Tue, 3 Nov 2020 08:25:49 +0000 (09:25 +0100)]
net: openvswitch: silence suspicious RCU usage warning
Silence suspicious RCU usage warning in ovs_flow_tbl_masks_cache_resize()
by replacing rcu_dereference() with rcu_dereference_ovsl().
In addition, when creating a new datapath, make sure it's configured under
the ovs_lock.
Fixes:
9bf24f594c6a ("net: openvswitch: make masks cache size configurable")
Reported-by: syzbot+9a8f8bfcc56e8578016c@syzkaller.appspotmail.com
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160439190002.56943.1418882726496275961.stgit@ebuild
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Wilson [Mon, 2 Nov 2020 16:19:31 +0000 (16:19 +0000)]
drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
Since __vma_release is run by a kworker after the fence has been
signaled, it is no longer protected by the active reference on the vma,
and so the alias of vw->pinned to vma->obj is also not protected by a
reference on the object. Add an explicit reference for vw->pinned so it
will always be safe.
Found by inspection.
Fixes:
54d7195f8c64 ("drm/i915: Unpin vma->obj on early error")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102161931.30031-1-chris@chris-wilson.co.uk
(cherry picked from commit
bc73e5d33048b7ab5f12b11b5d923700467a8e1d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 2 Nov 2020 22:10:57 +0000 (22:10 +0000)]
drm/i915/gt: Flush xcs before tgl breadcrumbs
In a simple test case that writes to scratch and then busy-waits for the
batch to be signaled, we observe that the signal is before the write is
posted. That is bad news.
Splitting the flush + write_dword into two separate flush_dw prevents
the issue from being reproduced, we can presume the post-sync op is not
so post-sync.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/216
Testcase: igt/gem_exec_fence/parallel
Testcase: igt/i915_selftest/live/gt_timelines
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-2-chris@chris-wilson.co.uk
(cherry picked from commit
09212e81e5450743e5b06b27c4e344e4c45b630d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 2 Nov 2020 22:10:56 +0000 (22:10 +0000)]
drm/i915/gt: Expose more parameters for emitting writes into the ring
Add another lower level to emit_ggtt_write so that the GGTT nature of
the write is not hardcoded into the emitter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-1-chris@chris-wilson.co.uk
(cherry picked from commit
2739d8cfc50aafff49d599cc0a5bc855445e99a7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Imre Deak [Tue, 27 Oct 2020 16:09:28 +0000 (18:09 +0200)]
drm/i915: Fix encoder lookup during PSR atomic check
The atomic check hooks must look up the encoder to be used with a
connector from the connector's atomic state, and not assume that it's
the connector's current attached encoder. The latter one can change
under the atomic check func, or can be unset yet as in the case of MST
connectors.
This fixes
[ 7.940719] Oops: 0000 [#1] SMP NOPTI
[ 7.944407] CPU: 2 PID: 143 Comm: kworker/2:2 Not tainted 5.6.0-1023-oem #23-Ubuntu
[ 7.952102] Hardware name: Dell Inc. Latitude 7320/, BIOS 88.87.11 09/07/2020
[ 7.959278] Workqueue: events output_poll_execute [drm_kms_helper]
[ 7.965511] RIP: 0010:intel_psr_atomic_check+0x37/0xa0 [i915]
[ 7.971327] Code: 80 2d 06 00 00 20 74 42 80 b8 34 71 00 00 00 74 39 48 8b 72 08 48 85 f6 74 30 80 b8 f8 71 00 00 00 74 27 4c 8b 87 80 04 00 00 <41> 8b 78 78 83 ff 08 77 19 31 c9 83 ff 05 77 19 48 81 c1 20 01 00
[ 7.977541] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
[ 7.990154] RSP: 0018:
ffffb864c073fac8 EFLAGS:
00010202
[ 7.990155] RAX:
ffff8c5d55ce0000 RBX:
ffff8c5d54519000 RCX:
0000000000000000
[ 7.990155] RDX:
ffff8c5d55cb30c0 RSI:
ffff8c5d89a0c800 RDI:
ffff8c5d55fcf800
[ 7.990156] RBP:
ffffb864c073fac8 R08:
0000000000000000 R09:
ffff8c5d55d9f3a0
[ 7.990156] R10:
ffff8c5d55cb30c0 R11:
0000000000000009 R12:
ffff8c5d55fcf800
[ 7.990156] R13:
ffff8c5d55cb30c0 R14:
ffff8c5d56989cc0 R15:
ffff8c5d56989cc0
[ 7.990158] FS:
0000000000000000(0000) GS:
ffff8c5d8e480000(0000) knlGS:
0000000000000000
[ 8.047193] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8.052970] CR2:
0000000000000078 CR3:
0000000856500005 CR4:
0000000000760ee0
[ 8.060137] PKRU:
55555554
[ 8.062867] Call Trace:
[ 8.065361] intel_digital_connector_atomic_check+0x53/0x130 [i915]
[ 8.071703] intel_dp_mst_atomic_check+0x5b/0x200 [i915]
[ 8.077074] drm_atomic_helper_check_modeset+0x1db/0x790 [drm_kms_helper]
[ 8.083942] intel_atomic_check+0x92/0xc50 [i915]
[ 8.088705] ? drm_plane_check_pixel_format+0x4f/0xb0 [drm]
[ 8.094345] ? drm_atomic_plane_check+0x7a/0x3a0 [drm]
[ 8.099548] drm_atomic_check_only+0x2b1/0x450 [drm]
[ 8.104573] drm_atomic_commit+0x18/0x50 [drm]
[ 8.109070] drm_client_modeset_commit_atomic+0x1c9/0x200 [drm]
[ 8.115056] drm_client_modeset_commit_force+0x55/0x160 [drm]
[ 8.120866] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper]
[ 8.128415] drm_fb_helper_set_par+0x34/0x50 [drm_kms_helper]
[ 8.134225] drm_fb_helper_hotplug_event.part.0+0xb4/0xe0 [drm_kms_helper]
[ 8.141150] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[ 8.147481] intel_fbdev_output_poll_changed+0x6f/0xa0 [i915]
[ 8.153287] drm_kms_helper_hotplug_event+0x2c/0x40 [drm_kms_helper]
[ 8.159709] output_poll_execute+0x1aa/0x1c0 [drm_kms_helper]
[ 8.165506] process_one_work+0x1e8/0x3b0
[ 8.169561] worker_thread+0x4d/0x400
[ 8.173249] kthread+0x104/0x140
[ 8.176515] ? process_one_work+0x3b0/0x3b0
[ 8.180726] ? kthread_park+0x90/0x90
[ 8.184416] ret_from_fork+0x1f/0x40
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2361
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2486
Reported-by: William Tseng <william.tseng@intel.com>
Reported-by: Cooper Chiou <cooper.chiou@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027160928.3665377-1-imre.deak@intel.com
(cherry picked from commit
00e5deb5c4f5fe367311465e720e65cfa1178792)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Thu, 22 Oct 2020 06:41:27 +0000 (07:41 +0100)]
drm/i915/gt: Use the local HWSP offset during submission
We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.
Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.
Fixes:
ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk
(cherry picked from commit
c10f6019d0b2dc8a6a62b55459f3ada5bc4e5e1a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 19 Oct 2020 20:38:25 +0000 (21:38 +0100)]
drm/i915/gem: Flush coherency domains on first set-domain-ioctl
Avoid skipping what appears to be a no-op set-domain-ioctl if the cache
coherency state is inconsistent with our target domain. This also has
the utility of using the population of the pages to validate the backing
store.
The danger in skipping the first set-domain is leaving the cache
inconsistent and submitting stale data, or worse leaving the clean data
in the cache and not flushing it to the GPU. The impact should be small
as it requires a no-op set-domain as the very first ioctl in a
particular sequence not found in typical userspace.
Reported-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Fixes:
754a25442705 ("drm/i915: Skip object locking around a no-op set-domain ioctl")
Testcase: igt/gem_mmap_offset/blt-coherency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019203825.10966-1-chris@chris-wilson.co.uk
(cherry picked from commit
44c2200afcd59f441b43f27829b4003397cc495d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rodrigo Vivi [Wed, 4 Nov 2020 00:12:52 +0000 (19:12 -0500)]
Merge tag 'gvt-fixes-2020-10-30' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2020-10-30
- Fix HWSP reset handling during vGPU suspend/resume (Colin)
- Apply flush workaround on APL now for possible guest hang (Colin)
- Fix vGPU context pin/unpin also for host suspend regression with
vGPU created (Colin)
- more BXT/APL mmio cmd access fixes (Colin)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030052117.GC27141@zhen-hp.sh.intel.com
Vinay Kumar Yadav [Mon, 2 Nov 2020 17:39:10 +0000 (23:09 +0530)]
chelsio/chtls: fix always leaking ctrl_skb
Correct skb refcount in alloc_ctrl_skb(), causing skb memleak
when chtls_send_abort() called with NULL skb.
it was always leaking the skb, correct it by incrementing skb
refs by one.
Fixes:
cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201102173909.24826-1-vinay.yadav@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vinay Kumar Yadav [Mon, 2 Nov 2020 17:36:51 +0000 (23:06 +0530)]
chelsio/chtls: fix memory leaks caused by a race
race between user context and softirq causing memleak,
consider the call sequence scenario
chtls_setkey() //user context
chtls_peer_close()
chtls_abort_req_rss()
chtls_setkey() //user context
work request skb queued in chtls_setkey() won't be freed
because resources are already cleaned for this connection,
fix it by not queuing work request while socket is closing.
v1->v2:
- fix W=1 warning.
v2->v3:
- separate it out from another memleak fix.
Fixes:
cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201102173650.24754-1-vinay.yadav@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joakim Zhang [Tue, 20 Oct 2020 18:45:27 +0000 (02:45 +0800)]
can: flexcan: flexcan_remove(): disable wakeup completely
With below sequence, we can see wakeup default is enabled after re-load module,
if it was enabled before, so we need disable wakeup in flexcan_remove().
| # cat /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| disabled
| # echo enabled > /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| # cat /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| enabled
| # rmmod flexcan
| # modprobe flexcan
| # cat /sys/bus/platform/drivers/flexcan/
5a8e0000.can/power/wakeup
| enabled
Fixes:
de3578c198c6 ("can: flexcan: add self wakeup support")
Fixes:
915f9666421c ("can: flexcan: add support for DT property 'wakeup-source'")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020184527.8190-1-qiangqing.zhang@nxp.com
[mkl: streamlined commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Joakim Zhang [Tue, 20 Oct 2020 15:53:57 +0000 (23:53 +0800)]
can: flexcan: add ECC initialization for VF610
For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
disable non-correctable errors interrupt and freeze mode, had better use
FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.
Fixes:
cdce844865bea ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-6-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Joakim Zhang [Tue, 20 Oct 2020 15:53:56 +0000 (23:53 +0800)]
can: flexcan: add ECC initialization for LX2160A
After double check with Layerscape CAN owner (Pankaj Bansal), confirm
that LX2160A indeed supports ECC feature, so correct the feature table.
For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
disable non-correctable errors interrupt and freeze mode, had better use
FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.
Fixes:
2c19bb43e5572 ("can: flexcan: add lx2160ar1 support")
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-5-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Joakim Zhang [Tue, 20 Oct 2020 15:53:55 +0000 (23:53 +0800)]
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
After double check with Layerscape CAN owner (Pankaj Bansal), confirm that
LS1021A doesn't support ECC feature, so remove FLEXCAN_QUIRK_DISABLE_MECR
quirk.
Fixes:
99b7668c04b27 ("can: flexcan: adding platform specific details for LS1021A")
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201020155402.30318-4-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tom Rix [Mon, 19 Oct 2020 17:24:12 +0000 (10:24 -0700)]
can: mcp251xfd: remove unneeded break
A break is not needed if it is preceded by a return.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019172412.31143-1-trix@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
kernel test robot [Mon, 19 Oct 2020 12:08:05 +0000 (20:08 +0800)]
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c:176:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes:
875347fe5756 ("can: mcp25xxfd: add regmap infrastructure")
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201019120805.GA63693@ae4257e0ab22
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 15 Oct 2020 19:16:37 +0000 (21:16 +0200)]
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
During debugging it turned out that some people have setups where the SPI
communication is more prone to CRC errors.
Increase the severity of both the transfer retry and transfer failure message
to give users feedback without the need to recompile the driver with debug
enabled.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Link: http://lore.kernel.org/r/20201019190524.1285319-15-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Tue, 13 Oct 2020 15:39:47 +0000 (17:39 +0200)]
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
Echo management is driven by PUCAN_MSG_LOOPED_BACK bit, while loopback
frames are identified with PUCAN_MSG_SELF_RECEIVE bit. Those bits are set
for each outgoing frame written to the IP core so that a copy of each one
will be placed into the rx path. Thus,
- when PUCAN_MSG_LOOPED_BACK is set then the rx frame is an echo of a
previously sent frame,
- when PUCAN_MSG_LOOPED_BACK+PUCAN_MSG_SELF_RECEIVE are set, then the rx
frame is an echo AND a loopback frame. Therefore, this frame must be
put into the socket rx path too.
This patch fixes how CAN frames are handled when these are sent while the
can interface is configured in "loopback on" mode.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Link: https://lore.kernel.org/r/20201013153947.28012-1-s.grosjean@peak-system.com
Fixes:
8ac8321e4a79 ("can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Wed, 14 Oct 2020 08:56:31 +0000 (10:56 +0200)]
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
Fabian Inostroza <fabianinostrozap@gmail.com> has discovered a potential
problem in the hardware timestamp reporting from the PCAN-USB USB CAN interface
(only), related to the fact that a timestamp of an event may precede the
timestamp used for synchronization when both records are part of the same USB
packet. However, this case was used to detect the wrapping of the time counter.
This patch details and fixes the two identified cases where this problem can
occur.
Reported-by: Fabian Inostroza <fabianinostrozap@gmail.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Link: https://lore.kernel.org/r/20201014085631.15128-1-s.grosjean@peak-system.com
Fixes:
bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dan Carpenter [Thu, 13 Aug 2020 14:06:04 +0000 (17:06 +0300)]
can: peak_usb: add range checking in decode operations
These values come from skb->data so Smatch considers them untrusted. I
believe Smatch is correct but I don't have a way to test this.
The usb_if->dev[] array has 2 elements but the index is in the 0-15
range without checks. The cfd->len can be up to 255 but the maximum
valid size is CANFD_MAX_DLEN (64) so that could lead to memory
corruption.
Fixes:
0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200813140604.GA456946@mwanda
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Navid Emamdoost [Fri, 5 Jun 2020 03:32:39 +0000 (22:32 -0500)]
can: xilinx_can: handle failure cases of pm_runtime_get_sync
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20200605033239.60664-1-navid.emamdoost@gmail.com
Fixes:
4716620d1b62 ("can: xilinx: Convert to runtime_pm")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Zhang Changzhong [Fri, 17 Jul 2020 08:04:39 +0000 (16:04 +0800)]
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
The driver forgets to call clk_disable_unprepare() in error path after
a success calling for clk_prepare_enable().
Fix it by adding a clk_disable_unprepare() in error path.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594973079-27743-1-git-send-email-zhangchangzhong@huawei.com
Fixes:
befa60113ce7 ("can: ti_hecc: add missing prepare and unprepare of the clock")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Colin Ian King [Tue, 20 Oct 2020 15:42:03 +0000 (16:42 +0100)]
can: isotp: padlen(): make const array static, makes object smaller
Don't populate the const array plen on the stack but instead it static. Makes
the object code smaller by 926 bytes.
Before:
text data bss dec hex filename
26531 1943 64 28538 6f7a net/can/isotp.o
After:
text data bss dec hex filename
25509 2039 64 27612 6bdc net/can/isotp.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 19 Oct 2020 12:02:29 +0000 (14:02 +0200)]
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
As reported by Thomas Wagner:
https://github.com/hartkopp/can-isotp/issues/34
the timeout handling for data frames is not enabled when the isotp socket is
used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled
by the isotpsniffer application which therefore became inconsistend with the
strict rx timeout rules when running the isotp protocol in the operational
mode.
This patch fixes this inconsistency by moving the return condition for the
listen-only mode behind the timeout handling code.
Reported-by: Thomas Wagner <thwa1@web.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes:
e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/34
Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Geert Uytterhoeven [Tue, 13 Oct 2020 14:13:41 +0000 (16:13 +0200)]
can: isotp: Explain PDU in CAN_ISOTP help text
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However,
this acronym is not explained here, nor in Documentation/networking/can.rst.
Expand the acronym to make it easier for users to decide if they need to enable
the CAN_ISOTP option or not.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Zhang Changzhong [Mon, 7 Sep 2020 06:31:48 +0000 (14:31 +0800)]
can: j1939: j1939_sk_bind(): return failure if netdev is down
When a netdev down event occurs after a successful call to
j1939_sk_bind(), j1939_netdev_notify() can handle it correctly.
But if the netdev already in down state before calling j1939_sk_bind(),
j1939_sk_release() will stay in wait_event_interruptible() blocked
forever. Because in this case, j1939_netdev_notify() won't be called and
j1939_tp_txtimer() won't call j1939_session_cancel() or other function
to clear session for ENETDOWN error, this lead to mismatch of
j1939_session_get/put() and jsk->skb_pending will never decrease to
zero.
To reproduce it use following commands:
1. ip link add dev vcan0 type vcan
2. j1939acd -r 100,80-120
1122334455667788 vcan0
3. presses ctrl-c and thread will be blocked forever
This patch adds check for ndev->flags in j1939_sk_bind() to avoid this
kind of situation and return with -ENETDOWN.
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Mon, 26 Oct 2020 09:44:42 +0000 (10:44 +0100)]
can: j1939: use backquotes for code samples
This patch adds backquotes for code samples.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201026094442.16587-1-yegorslists@googlemail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Thu, 22 Oct 2020 08:37:08 +0000 (10:37 +0200)]
can: j1939: swap addr and pgn in the send example
The address was wrongly assigned to the PGN field and vice versa.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201022083708.8755-1-yegorslists@googlemail.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Tue, 20 Oct 2020 10:10:43 +0000 (12:10 +0200)]
can: j1939: fix syntax and spelling
This patches fixes the syntax an spelling of the j1939 documentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201020101043.6369-1-yegorslists@googlemail.com
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov [Tue, 20 Oct 2020 08:11:34 +0000 (10:11 +0200)]
can: j1939: rename jacd tool
Due to naming conflicts, jacd was renamed to j1939acd in:
https://github.com/linux-can/can-utils/pull/199
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201020081134.3597-1-yegorslists@googlemail.com
Link: https://github.com/linux-can/can-utils/pull/199
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel [Wed, 18 Dec 2019 08:39:02 +0000 (09:39 +0100)]
can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
All user space generated SKBs are owned by a socket (unless injected into the
key via AF_PACKET). If a socket is closed, all associated skbs will be cleaned
up.
This leads to a problem when a CAN driver calls can_put_echo_skb() on a
unshared SKB. If the socket is closed prior to the TX complete handler,
can_get_echo_skb() and the subsequent delivering of the echo SKB to all
registered callbacks, a SKB with a refcount of 0 is delivered.
To avoid the problem, in can_get_echo_skb() the original SKB is now always
cloned, regardless of shared SKB or not. If the process exists it can now
safely discard its SKBs, without disturbing the delivery of the echo SKB.
The problem shows up in the j1939 stack, when it clones the incoming skb, which
detects the already 0 refcount.
We can easily reproduce this with following example:
testj1939 -B -r can0: &
cansend can0
1823ff40#0123
WARNING: CPU: 0 PID: 293 at lib/refcount.c:25 refcount_warn_saturate+0x108/0x174
refcount_t: addition on 0; use-after-free.
Modules linked in: coda_vpu imx_vdoa videobuf2_vmalloc dw_hdmi_ahb_audio vcan
CPU: 0 PID: 293 Comm: cansend Not tainted 5.5.0-rc6-00376-g9e20dcb7040d #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<
c010f570>] (dump_backtrace) from [<
c010f90c>] (show_stack+0x20/0x24)
[<
c010f8ec>] (show_stack) from [<
c0c3e1a4>] (dump_stack+0x8c/0xa0)
[<
c0c3e118>] (dump_stack) from [<
c0127fec>] (__warn+0xe0/0x108)
[<
c0127f0c>] (__warn) from [<
c01283c8>] (warn_slowpath_fmt+0xa8/0xcc)
[<
c0128324>] (warn_slowpath_fmt) from [<
c0539c0c>] (refcount_warn_saturate+0x108/0x174)
[<
c0539b04>] (refcount_warn_saturate) from [<
c0ad2cac>] (j1939_can_recv+0x20c/0x210)
[<
c0ad2aa0>] (j1939_can_recv) from [<
c0ac9dc8>] (can_rcv_filter+0xb4/0x268)
[<
c0ac9d14>] (can_rcv_filter) from [<
c0aca2cc>] (can_receive+0xb0/0xe4)
[<
c0aca21c>] (can_receive) from [<
c0aca348>] (can_rcv+0x48/0x98)
[<
c0aca300>] (can_rcv) from [<
c09b1fdc>] (__netif_receive_skb_one_core+0x64/0x88)
[<
c09b1f78>] (__netif_receive_skb_one_core) from [<
c09b2070>] (__netif_receive_skb+0x38/0x94)
[<
c09b2038>] (__netif_receive_skb) from [<
c09b2130>] (netif_receive_skb_internal+0x64/0xf8)
[<
c09b20cc>] (netif_receive_skb_internal) from [<
c09b21f8>] (netif_receive_skb+0x34/0x19c)
[<
c09b21c4>] (netif_receive_skb) from [<
c0791278>] (can_rx_offload_napi_poll+0x58/0xb4)
Fixes:
0ae89beb283a ("can: add destructor for self generated skbs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: http://lore.kernel.org/r/20200124132656.22156-1-o.rempel@pengutronix.de
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Tue, 20 Oct 2020 06:44:43 +0000 (08:44 +0200)]
can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames
The can_get_echo_skb() function returns the number of received bytes to
be used for netdev statistics. In the case of RTR frames we get a valid
(potential non-zero) data length value which has to be passed for further
operations. But on the wire RTR frames have no payload length. Therefore
the value to be used in the statistics has to be zero for RTR frames.
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201020064443.80164-1-socketcan@hartkopp.net
Fixes:
cf5046b309b3 ("can: dev: let can_get_echo_skb() return dlc of CAN frame")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Tue, 3 Nov 2020 21:28:50 +0000 (13:28 -0800)]
Merge tag 'perf-tools-for-v5.10-2020-11-03' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Only fixes and a sync of the headers so that the perf build is silent:
- Fix visibility attribute in python module init code with newer gcc
- Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event
files
- Fix the build on new fedora by removing LTO compiler options when
building perl support
- Remove broken __no_tail_call attribute
- Fix segfault when trying to trace events by cgroup
- Fix crash with non-jited BPF progs
- Increase buffer size in TUI browser, fixing format truncation
- Fix printing of build-id for objects lacking one
- Fix byte swapping for ino_generation field in MMAP2 perf.data
records
- Fix byte swapping for CGROUP perf.data records, for cross arch
analysis of perf.data files
- Fix the fast path of feature detection
- Update kernel header copies"
* tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools feature: Fixup fast path feature detection
perf tools: Add missing swap for cgroup events
perf tools: Add missing swap for ino_generation
perf tools: Initialize output buffer in build_id__sprintf
perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()
tools include UAPI: Update linux/mount.h copy
tools headers UAPI: Update tools's copy of linux/perf_event.h
tools kvm headers: Update KVM headers from the kernel sources
tools UAPI: Update copy of linux/mman.h from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools x86 headers: Update required-features.h header from the kernel
tools x86 headers: Update cpufeatures.h headers copies
tools headers UAPI: Update fscrypt.h copy
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync prctl.h with the kernel sources
perf scripting python: Avoid declaring function pointers with a visibility attribute
perf tools: Remove broken __no_tail_call attribute
perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX
perf trace: Fix segfault when trying to trace events by cgroup
perf tools: Fix crash with non-jited bpf progs
...
Vincent Mailhol [Fri, 2 Oct 2020 15:41:45 +0000 (00:41 +0900)]
can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context
If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but
not always, the case), the 'WARN_ON(in_irq)' in
net/core/skbuff.c#skb_release_head_state() might be triggered, under network
congestion circumstances, together with the potential risk of a NULL pointer
dereference.
The root cause of this issue is the call to kfree_skb() instead of
dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog().
This patch prevents the skb to be freed within the call to netif_rx() by
incrementing its reference count with skb_get(). The skb is finally freed by
one of the in-irq-context safe functions: dev_consume_skb_any() or
dev_kfree_skb_any(). The "any" version is used because some drivers might call
can_get_echo_skb() in a normal context.
The reason for this issue to occur is that initially, in the core network
stack, loopback skb were not supposed to be received in hardware IRQ context.
The CAN stack is an exeption.
This bug was previously reported back in 2017 in [1] but the proposed patch
never got accepted.
While [1] directly modifies net/core/dev.c, we try to propose here a
smoother modification local to CAN network stack (the assumption
behind is that only CAN devices are affected by this issue).
[1] http://lore.kernel.org/r/
57a3ffb6-3309-3ad5-5a34-
e93c3fe3614d@cetitec.com
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20201002154219.4887-2-mailhol.vincent@wanadoo.fr
Fixes:
39549eef3587 ("can: CAN Network device driver and Netlink interface")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Thu, 18 Jun 2020 10:47:06 +0000 (12:47 +0200)]
can: rx-offload: don't call kfree_skb() from IRQ context
A CAN driver, using the rx-offload infrastructure, is reading CAN frames
(usually in IRQ context) from the hardware and placing it into the rx-offload
queue to be delivered to the networking stack via NAPI.
In case the rx-offload queue is full, trying to add more skbs results in the
skbs being dropped using kfree_skb(). If done from hard-IRQ context this
results in the following warning:
[ 682.552693] ------------[ cut here ]------------
[ 682.557360] WARNING: CPU: 0 PID: 3057 at net/core/skbuff.c:650 skb_release_head_state+0x74/0x84
[ 682.566075] Modules linked in: can_raw can coda_vpu flexcan dw_hdmi_ahb_audio v4l2_jpeg imx_vdoa can_dev
[ 682.575597] CPU: 0 PID: 3057 Comm: cansend Tainted: G W 5.7.0+ #18
[ 682.583098] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 682.589657] [<
c0112628>] (unwind_backtrace) from [<
c010c1c4>] (show_stack+0x10/0x14)
[ 682.597423] [<
c010c1c4>] (show_stack) from [<
c06c481c>] (dump_stack+0xe0/0x114)
[ 682.604759] [<
c06c481c>] (dump_stack) from [<
c0128f10>] (__warn+0xc0/0x10c)
[ 682.611742] [<
c0128f10>] (__warn) from [<
c0129314>] (warn_slowpath_fmt+0x5c/0xc0)
[ 682.619248] [<
c0129314>] (warn_slowpath_fmt) from [<
c0b95dec>] (skb_release_head_state+0x74/0x84)
[ 682.628143] [<
c0b95dec>] (skb_release_head_state) from [<
c0b95e08>] (skb_release_all+0xc/0x24)
[ 682.636774] [<
c0b95e08>] (skb_release_all) from [<
c0b95eac>] (kfree_skb+0x74/0x1c8)
[ 682.644479] [<
c0b95eac>] (kfree_skb) from [<
bf001d1c>] (can_rx_offload_queue_sorted+0xe0/0xe8 [can_dev])
[ 682.654051] [<
bf001d1c>] (can_rx_offload_queue_sorted [can_dev]) from [<
bf001d6c>] (can_rx_offload_get_echo_skb+0x48/0x94 [can_dev])
[ 682.666007] [<
bf001d6c>] (can_rx_offload_get_echo_skb [can_dev]) from [<
bf01efe4>] (flexcan_irq+0x194/0x5dc [flexcan])
[ 682.676734] [<
bf01efe4>] (flexcan_irq [flexcan]) from [<
c019c1ec>] (__handle_irq_event_percpu+0x4c/0x3ec)
[ 682.686322] [<
c019c1ec>] (__handle_irq_event_percpu) from [<
c019c5b8>] (handle_irq_event_percpu+0x2c/0x88)
[ 682.695993] [<
c019c5b8>] (handle_irq_event_percpu) from [<
c019c64c>] (handle_irq_event+0x38/0x5c)
[ 682.704887] [<
c019c64c>] (handle_irq_event) from [<
c01a1058>] (handle_fasteoi_irq+0xc8/0x180)
[ 682.713432] [<
c01a1058>] (handle_fasteoi_irq) from [<
c019b2c0>] (generic_handle_irq+0x30/0x44)
[ 682.722063] [<
c019b2c0>] (generic_handle_irq) from [<
c019b8f8>] (__handle_domain_irq+0x64/0xdc)
[ 682.730783] [<
c019b8f8>] (__handle_domain_irq) from [<
c06df4a4>] (gic_handle_irq+0x48/0x9c)
[ 682.739158] [<
c06df4a4>] (gic_handle_irq) from [<
c0100b30>] (__irq_svc+0x70/0x98)
[ 682.746656] Exception stack(0xe80e9dd8 to 0xe80e9e20)
[ 682.751725] 9dc0:
00000001 e80e8000
[ 682.759922] 9de0:
e820cf80 00000000 ffffe000 00000000 eaf08fe4 00000000 600d0013 00000000
[ 682.768117] 9e00:
c1732e3c c16093a8 e820d4c0 e80e9e28 c018a57c c018b870 600d0013 ffffffff
[ 682.776315] [<
c0100b30>] (__irq_svc) from [<
c018b870>] (lock_acquire+0x108/0x4e8)
[ 682.783821] [<
c018b870>] (lock_acquire) from [<
c0e938e4>] (down_write+0x48/0xa8)
[ 682.791242] [<
c0e938e4>] (down_write) from [<
c02818dc>] (unlink_file_vma+0x24/0x40)
[ 682.798922] [<
c02818dc>] (unlink_file_vma) from [<
c027a258>] (free_pgtables+0x34/0xb8)
[ 682.806858] [<
c027a258>] (free_pgtables) from [<
c02835a4>] (exit_mmap+0xe4/0x170)
[ 682.814361] [<
c02835a4>] (exit_mmap) from [<
c01248e0>] (mmput+0x5c/0x110)
[ 682.821171] [<
c01248e0>] (mmput) from [<
c012e910>] (do_exit+0x374/0xbe4)
[ 682.827892] [<
c012e910>] (do_exit) from [<
c0130888>] (do_group_exit+0x38/0xb4)
[ 682.835132] [<
c0130888>] (do_group_exit) from [<
c0130914>] (__wake_up_parent+0x0/0x14)
[ 682.843063] irq event stamp: 1936
[ 682.846399] hardirqs last enabled at (1935): [<
c02938b0>] rmqueue+0xf4/0xc64
[ 682.853553] hardirqs last disabled at (1936): [<
c0100b20>] __irq_svc+0x60/0x98
[ 682.860799] softirqs last enabled at (1878): [<
bf04cdcc>] raw_release+0x108/0x1f0 [can_raw]
[ 682.869256] softirqs last disabled at (1876): [<
c0b8f478>] release_sock+0x18/0x98
[ 682.876753] ---[ end trace
7bca4751ce44c444 ]---
This patch fixes the problem by replacing the kfree_skb() by
dev_kfree_skb_any(), as rx-offload might be called from threaded IRQ handlers
as well.
Fixes:
ca913f1ac024 ("can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak")
Fixes:
6caf8a6d6586 ("can: rx-offload: can_rx_offload_queue_tail(): fix error handling, avoid skb mem leak")
Link: http://lore.kernel.org/r/20201019190524.1285319-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Zhang Changzhong [Tue, 14 Jul 2020 06:44:50 +0000 (14:44 +0800)]
can: proc: can_remove_proc(): silence remove_proc_entry warning
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc()
will trigger a warning:
WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0
Kernel panic - not syncing: panic_on_warn set ...
Fix to return early from can_remove_proc() if can proc_dir does not exists.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com
Fixes:
8e8cda6d737d ("can: initial support for network namespaces")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel [Thu, 22 Oct 2020 07:52:18 +0000 (09:52 +0200)]
dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml
In order to automate the verification of DT nodes convert
fsl-flexcan.txt to fsl,flexcan.yaml
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201022075218.11880-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel [Thu, 22 Oct 2020 07:52:17 +0000 (09:52 +0200)]
dt-bindings: can: add can-controller.yaml
For now we have only node name as common rule for all CAN controllers
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201022075218.11880-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Daniele Palmas [Mon, 2 Nov 2020 11:01:08 +0000 (12:01 +0100)]
net: usb: qmi_wwan: add Telit LE910Cx 0x1230 composition
Add support for Telit LE910Cx 0x1230 composition:
0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 3 Nov 2020 21:14:14 +0000 (13:14 -0800)]
Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
Qii Wang [Fri, 30 Oct 2020 11:58:01 +0000 (19:58 +0800)]
i2c: mediatek: move dma reset before i2c reset
The i2c driver default do dma reset after i2c reset, but sometimes
i2c reset will trigger dma tx2rx, then apdma write data to dram
which has been i2c_put_dma_safe_msg_buf(kfree). Move dma reset
before i2c reset in mtk_i2c_init_hw to fix it.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Davide Caratti [Mon, 2 Nov 2020 09:09:49 +0000 (10:09 +0100)]
mptcp: token: fix unititialized variable
gcc complains about use of uninitialized 'num'. Fix it by doing the first
assignment of 'num' when the variable is declared.
Fixes:
96d890daad05 ("mptcp: add msk interations helper")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/49e20da5d467a73414d4294a8bd35e2cb1befd49.1604308087.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fred Gao [Mon, 2 Nov 2020 18:01:20 +0000 (02:01 +0800)]
vfio/pci: Bypass IGD init in case of -ENODEV
Bypass the IGD initialization when -ENODEV returns,
that should be the case if opregion is not available for IGD
or within discrete graphics device's option ROM,
or host/lpc bridge is not found.
Then use of -ENODEV here means no special device resources found
which needs special care for VFIO, but we still allow other normal
device resource access.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Fred Gao <fred.gao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Zhang Qilong [Sat, 31 Oct 2020 03:03:53 +0000 (11:03 +0800)]
vfio: platform: fix reference leak in vfio_platform_open
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put will result in
reference leak in vfio_platform_open, so we should fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Mon, 2 Nov 2020 22:02:00 +0000 (15:02 -0700)]
vfio/pci: Implement ioeventfd thread handler for contended memory lock
The ioeventfd is called under spinlock with interrupts disabled,
therefore if the memory lock is contended defer code that might
sleep to a thread context.
Fixes:
bc93b9ae0151 ("vfio-pci: Avoid recursive read-lock usage")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209253#c1
Reported-by: Ian Pilcher <arequipeno@gmail.com>
Tested-by: Ian Pilcher <arequipeno@gmail.com>
Tested-by: Justin Gatzen <justin.gatzen@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Diana Craciun [Mon, 26 Oct 2020 16:53:36 +0000 (18:53 +0200)]
vfio/fsl-mc: Make vfio_fsl_mc_irqs_allocate static
Fixed compiler warning:
drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:5: warning: no previous
prototype for function 'vfio_fsl_mc_irqs_allocate' [-Wmissing-prototypes]
^
drivers/vfio/fsl-mc/vfio_fsl_mc_intr.c:16:1: note: declare 'static'
if the function is not intended to be used outside of this translation unit
int vfio_fsl_mc_irqs_allocate(struct vfio_fsl_mc_device *vdev)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Dan Carpenter [Fri, 23 Oct 2020 11:29:47 +0000 (14:29 +0300)]
vfio/fsl-mc: prevent underflow in vfio_fsl_mc_mmap()
My static analsysis tool complains that the "index" can be negative.
There are some checks in do_mmap() which try to prevent underflows but
I don't know if they are sufficient for this situation. Either way,
making "index" unsigned is harmless so let's do it just to be safe.
Fixes:
67247289688d ("vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Linus Torvalds [Tue, 3 Nov 2020 17:57:30 +0000 (09:57 -0800)]
Merge tag 'docs-5.10-3' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A small number of fixes, plus a build tweak to respect the desire for
silence in V=0 builds"
* tag 'docs-5.10-3' of git://git.lwn.net/linux:
docs: fix automarkup regression on Python 2
documentation: arm: sunxi: add Allwinner H6 documents
scripts: kernel-doc: split typedef complex regex
scripts: kernel-doc: fix typedef parsing
docs: Makefile: honor V=0 for docs building
projects / platform / kernel / linux-starfive.git / log