Zijun Hu [Mon, 6 Nov 2023 06:02:46 +0000 (14:02 +0800)]
Bluetooth: qca: Set both WIDEBAND_SPEECH and LE_STATES quirks for QCA2066
[ Upstream commit
5d192b697c7417254cdd9edc3d5e9e0364eb9045 ]
Set both WIDEBAND_SPEECH_SUPPORTED and VALID_LE_STATES quirks
for QCA2066.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Berg [Wed, 20 Dec 2023 11:41:41 +0000 (13:41 +0200)]
wifi: cfg80211: free beacon_ies when overridden from hidden BSS
[ Upstream commit
32af9a9e1069e55bc02741fb00ac9d0ca1a2eaef ]
This is a more of a cosmetic fix. The branch will only be taken if
proberesp_ies is set, which implies that beacon_ies is not set unless we
are connected to an AP that just did a channel switch. And, in that case
we should have found the BSS in the internal storage to begin with.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.b898e22dadff.Id8c4c10aedd176ef2e18a4cad747b299f150f9df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Su Hui [Tue, 19 Dec 2023 06:57:39 +0000 (14:57 +0800)]
wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift()
[ Upstream commit
5c16618bc06a41ad68fd8499a21d35ef57ca06c2 ]
Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift().
And fix an undefined bitwise shift behavior problem.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-12-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mingyi Zhang [Thu, 21 Dec 2023 03:39:47 +0000 (11:39 +0800)]
libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relos
[ Upstream commit
fc3a5534e2a8855427403113cbeb54af5837bbe0 ]
An issue occurred while reading an ELF file in libbpf.c during fuzzing:
Program received signal SIGSEGV, Segmentation fault.
0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
4206 in libbpf.c
(gdb) bt
#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
#9 0x00000000005f2601 in main ()
(gdb)
scn_data was null at this code(tools/lib/bpf/src/libbpf.c):
if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {
The scn_data is derived from the code above:
scn = elf_sec_by_idx(obj, sec_idx);
scn_data = elf_sec_data(obj, scn);
relo_sec_name = elf_sec_str(obj, shdr->sh_name);
sec_name = elf_sec_name(obj, scn);
if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
return -EINVAL;
In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer
Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com>
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Changye Wu <wuchangye@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ching-Te Ku [Mon, 18 Dec 2023 06:13:31 +0000 (14:13 +0800)]
wifi: rtw89: coex: Fix wrong Wi-Fi role info and FDDT parameter members
[ Upstream commit
acc55d7dd4de525ac07e43e90ea3cc630677ec8a ]
The Wi-Fi firmware 29.29.X should use version 2 role info format. FDDT
mechanism version 5 use the same cell members to judge traffic situation,
don't need to add another new format.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zenm Chen [Sun, 17 Dec 2023 12:30:17 +0000 (20:30 +0800)]
wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devices
[ Upstream commit
4e87ca403e2008b9e182239e1abbf6876a55eb33 ]
Add additional USB IDs found in the vendor driver from
https://github.com/Mange/rtl8192eu-linux-driver to support more
RTL8192EU devices.
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231217123017.1982-1-zenmchen@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xianwei Zhao [Fri, 15 Dec 2023 08:28:00 +0000 (16:28 +0800)]
arm64: dts: amlogic: fix format for s4 uart node
[ Upstream commit
eb54ef36282f670c704ed5af8593da62bebba80d ]
Aliases use lowercase letters and place status in end.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231215-s4-dts-v1-1-7831ab6972be@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jesse Brandeburg [Wed, 6 Dec 2023 01:01:06 +0000 (17:01 -0800)]
ice: fix pre-shifted bit usage
[ Upstream commit
7173be21ae29ef50ada42fd4464056a9d3f55bb3 ]
While converting to FIELD_PREP() and FIELD_GET(), it was noticed that
some of the RSS defines had *included* the shift in their definitions.
This is completely outside of normal, such that a developer could easily
make a mistake and shift at the usage site (like when using
FIELD_PREP()).
Rename the defines and set them to the "pre-shifted values" so they
match the template the driver normally uses for masks and the member
bits of the mask, which also allows the driver to use FIELD_PREP
correctly with these values. Use GENMASK() for this changed MASK value.
Do the same for the VLAN EMODE defines as well.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mao Jinlong [Sun, 10 Dec 2023 07:26:31 +0000 (23:26 -0800)]
arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports
[ Upstream commit
bdb6339fd46b8702ea7411b0b414587b86a40562 ]
When a node is only one in port or one out port, address-cells and
size-cells are not required in in-ports and out-ports. And the number
and reg of the port need to be removed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-5-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mao Jinlong [Sun, 10 Dec 2023 07:26:30 +0000 (23:26 -0800)]
arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
[ Upstream commit
ae5ee3562a2519214b12228545e88a203dd68bbd ]
out-ports is a required property for coresight ETM. Add out-ports for
ETM nodes to fix the warning.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-4-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mao Jinlong [Sun, 10 Dec 2023 07:26:29 +0000 (23:26 -0800)]
arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
[ Upstream commit
9a6fc510a6a3ec150cb7450aec1e5f257e6fc77b ]
Add the inport of funnel@3023000 to fix 'in-ports' is a required property
warning.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lore.kernel.org/r/20231210072633.4243-3-quic_jinlmao@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Lyakas [Wed, 13 Dec 2023 12:24:31 +0000 (14:24 +0200)]
md: Whenassemble the array, consult the superblock of the freshest device
[ Upstream commit
dc1cc22ed58f11d58d8553c5ec5f11cbfc3e3039 ]
Upon assembling the array, both kernel and mdadm allow the devices to have event
counter difference of 1, and still consider them as up-to-date.
However, a device whose event count is behind by 1, may in fact not be up-to-date,
and array resync with such a device may cause data corruption.
To avoid this, consult the superblock of the freshest device about the status
of a device, whose event counter is behind by 1.
Signed-off-by: Alex Lyakas <alex.lyakas@zadara.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/1702470271-16073-1-git-send-email-alex.lyakas@zadara.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Mon, 4 Dec 2023 17:34:18 +0000 (18:34 +0100)]
block: prevent an integer overflow in bvec_try_merge_hw_page
[ Upstream commit
3f034c374ad55773c12dd8f3c1607328e17c0072 ]
Reordered a check to avoid a possible overflow when adding len to bv_len.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231204173419.782378-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tobias Waldekranz [Thu, 14 Dec 2023 13:50:24 +0000 (14:50 +0100)]
net: dsa: mv88e6xxx: Fix mv88e6352_serdes_get_stats error path
[ Upstream commit
fc82a08ae795ee6b73fb6b50785f7be248bec7b5 ]
mv88e6xxx_get_stats, which collects stats from various sources,
expects all callees to return the number of stats read. If an error
occurs, 0 should be returned.
Prevent future mishaps of this kind by updating the return type to
reflect this contract.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Igor Russkikh [Wed, 13 Dec 2023 09:50:44 +0000 (10:50 +0100)]
net: atlantic: eliminate double free in error handling logic
[ Upstream commit
b3cb7a830a24527877b0bc900b9bd74a96aea928 ]
Driver has a logic leak in ring data allocation/free,
where aq_ring_free could be called multiple times on same ring,
if system is under stress and got memory allocation error.
Ring pointer was used as an indicator of failure, but this is
not correct since only ring data is allocated/deallocated.
Ring itself is an array member.
Changing ring allocation functions to return error code directly.
This simplifies error handling and eliminates aq_ring_free
on higher layer.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213095044.23146-1-irusskikh@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ahmed Zaki [Wed, 13 Dec 2023 00:33:17 +0000 (17:33 -0700)]
ice: fix ICE_AQ_VSI_Q_OPT_RSS_* register values
[ Upstream commit
20f73b60bb5c276cee9b1a530f100c677bc74af8 ]
Fix the values of the ICE_AQ_VSI_Q_OPT_RSS_* registers. Shifting is
already done when the values are used, no need to double shift. Bug was
not discovered earlier since only ICE_AQ_VSI_Q_OPT_RSS_TPLZ (Zero) is
currently used.
Also, rename ICE_AQ_VSI_Q_OPT_RSS_XXX to ICE_AQ_VSI_Q_OPT_RSS_HASH_XXX
for consistency.
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-5-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yihang Li [Thu, 14 Dec 2023 03:45:12 +0000 (11:45 +0800)]
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
[ Upstream commit
ce26497c745d0541aec930d5211b431a1c26af97 ]
Currently in directly attached scenario, the phyup event
HISI_PHYE_PHY_UP_PM is notified before .phy_attached is set - this may
cause the phyup work hisi_sas_bytes_dmaed() execution failed and the
attached device will not be found.
To fix it, set .phy_attached before notifing phyup event.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Tee [Thu, 7 Dec 2023 22:40:38 +0000 (14:40 -0800)]
scsi: lpfc: Move determination of vmid_flag after VMID reinitialization completes
[ Upstream commit
aba0fb0ef607a71511d23a07406f11130c1a54c5 ]
If priority tagging is set in the service parameters of a FLOGI cmpl, then
we update the vmid_flag. In the current logic, if a follow up FLOGI cmpl
updates its service parameters such that priority tagging is no longer set,
then the vmid_flag ends up keeping stale data.
Fix by ensuring we clear the vmid_flag member during lpfc_reinit_vmid, and
check the priority tagging service parameter after reinitialization of the
vmid data structures.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Tee [Thu, 7 Dec 2023 22:40:37 +0000 (14:40 -0800)]
scsi: lpfc: Reinitialize an NPIV's VMID data structures after FDISC
[ Upstream commit
8dc8eb89f4df74593ba4bf30c3d31a0fc6d3ea47 ]
After a follow up FDISC cmpl, an NPIV's VMID data structures are not
updated.
Fix by calling lpfc_reinit_vmid and copying the physical port's vmid_flag
to the NPIV's vmid_flag in the NPIV registration cmpl code path.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Thu, 7 Dec 2023 10:26:31 +0000 (07:26 -0300)]
ARM: dts: imx23/28: Fix the DMA controller node name
[ Upstream commit
858d83ca4b50bbc8693d95cc94310e6d791fb2e6 ]
Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'.
Change it to fix the following dt-schema warning.
imx28-apf28.dtb: dma-apbx@
80024000: $nodename:0: 'dma-apbx@
80024000' does not match '^dma-controller(@.*)?$'
from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Thu, 7 Dec 2023 10:12:12 +0000 (07:12 -0300)]
ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
[ Upstream commit
e3aa1a82fb20ee97597022f6528823a8ab82bde6 ]
The 'gpios' property to describe the SDA and SCL GPIOs is considered
deprecated according to i2c-gpio.yaml.
Switch to the preferred 'sda-gpios' and 'scl-gpios' properties.
This fixes the following schema warnings:
imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property
from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 20:19:05 +0000 (17:19 -0300)]
ARM: dts: imx27-apf27dev: Fix LED name
[ Upstream commit
dc35e253d032b959d92e12f081db5b00db26ae64 ]
Per leds-gpio.yaml, the led names should start with 'led'.
Change it to fix the following dt-schema warning:
imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 20:14:05 +0000 (17:14 -0300)]
ARM: dts: imx25/27: Pass timing0
[ Upstream commit
11ab7ad6f795ae23c398a4a5c56505d3dab27c4c ]
Per display-timings.yaml, the 'timing' pattern should be used to
describe the display timings.
Change it accordingly to fix the following dt-schema warning:
imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 20:00:33 +0000 (17:00 -0300)]
ARM: dts: imx25: Fix the iim compatible string
[ Upstream commit
f0b929f58719fc57a4926ab4fc972f185453d6a5 ]
Per imx-iim.yaml, the compatible string should only contain a single
entry.
Use it as "fsl,imx25-iim" to fix the following dt-schema warning:
imx25-karo-tx25.dtb: efuse@
53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long
from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Tue, 12 Dec 2023 22:53:43 +0000 (14:53 -0800)]
selftests/bpf: fix compiler warnings in RELEASE=1 mode
[ Upstream commit
62d9a969f4a95219c757831e9ad66cd4dd9edee5 ]
When compiling BPF selftests with RELEASE=1, we get two new
warnings, which are treated as errors. Fix them.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231212225343.1723081-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Simek [Thu, 30 Nov 2023 09:59:16 +0000 (10:59 +0100)]
arm64: zynqmp: Fix clock node name in kv260 cards
[ Upstream commit
0bfb7950cc1975372c4c58c3d3f9803f05245d46 ]
node name shouldn't use '_' that's why convert it to '-'.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Simek [Thu, 30 Nov 2023 09:59:15 +0000 (10:59 +0100)]
arm64: zynqmp: Move fixed clock to / for kv260
[ Upstream commit
6a10a19a6bd2fd8d27a510678bf87bd9408f51d8 ]
fixed clock nodes can't be on the bus because they are missing reg
property. That's why move them to root.
And because it is root it is good to have it as the first node in a file.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 12 Dec 2023 21:47:42 +0000 (13:47 -0800)]
block/rnbd-srv: Check for unlikely string overflow
[ Upstream commit
9e4bf6a08d1e127bcc4bd72557f2dfafc6bc7f41 ]
Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:
drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~
In function 'rnbd_srv_get_full_path',
inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
617 | dev_search_path, dev_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202312100355.lHoJPgKy-lkp@intel.com/
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <linux-block@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Mon, 11 Dec 2023 18:57:59 +0000 (10:57 -0800)]
ionic: bypass firmware cmds when stuck in reset
[ Upstream commit
ca5fdf9a7c5b65968c718f2be159cda4c13556a1 ]
If the driver or firmware is stuck in reset state, don't bother
trying to use adminq commands. This speeds up shutdown and
prevents unnecessary timeouts and error messages.
This includes a bit of rework on ionic_adminq_post_wait()
and ionic_adminq_post_wait_nomsg() to both use
__ionic_adminq_post_wait() which can do the checks needed in
both cases.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Mon, 11 Dec 2023 18:57:57 +0000 (10:57 -0800)]
ionic: pass opcode to devcmd_wait
[ Upstream commit
24f110240c03c6b5368f1203bac72883d511e606 ]
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Marangi [Fri, 8 Dec 2023 14:51:48 +0000 (15:51 +0100)]
net: phy: at803x: fix passing the wrong reference for config_intr
[ Upstream commit
f8fdbf3389f44c7026f16e36cb1f2ff017f7f5b2 ]
Fix passing the wrong reference for config_initr on passing the function
pointer, drop the wrong & from at803x_config_intr in the PHY struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 12:39:21 +0000 (09:39 -0300)]
ARM: dts: imx1: Fix sram node
[ Upstream commit
c248e535973088ba7071ff6f26ab7951143450af ]
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
The node name should be sram.
Change the node name and pass the required properties to fix the
following dt-schema warnings:
imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?'
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
imx1-apf9328.dtb: esram@300000: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 12:39:20 +0000 (09:39 -0300)]
ARM: dts: imx27: Fix sram node
[ Upstream commit
2fb7b2a2f06bb3f8321cf26c33e4e820c5b238b6 ]
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
Pass them to fix the following dt-schema warnings:
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 12:36:05 +0000 (09:36 -0300)]
ARM: dts: imx: Use flash@0,0 pattern
[ Upstream commit
1e1d7cc478fb16816de09740e3c323c0c188d58f ]
Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern.
Change it to 'flash@0,0' to fix the following dt-schema warning:
imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 6 Dec 2023 11:58:26 +0000 (08:58 -0300)]
ARM: dts: imx25/27-eukrea: Fix RTC node name
[ Upstream commit
68c711b882c262e36895547cddea2c2d56ce611d ]
Node names should be generic. Use 'rtc' as node name to fix
the following dt-schema warning:
imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Jonker [Mon, 4 Dec 2023 17:40:27 +0000 (18:40 +0100)]
ARM: dts: rockchip: fix rk3036 hdmi ports node
[ Upstream commit
27ded76ef0fcfcf939914532aae575cf23c221b4 ]
Fix hdmi ports node so that it matches the
rockchip,inno-hdmi.yaml binding.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/9a2afac1-ed5c-382d-02b0-b2f5f1af3abb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lingbo Kong [Wed, 6 Dec 2023 14:17:59 +0000 (22:17 +0800)]
wifi: ath12k: fix the issue that the multicast/broadcast indicator is not read correctly for WCN7850
[ Upstream commit
7133b072dfbfac8763ffb017642c9c894894c50d ]
We observe some packets are discarded in ieee80211_rx_handlers_result
function for WCN7850. This is because the way to get multicast/broadcast
indicator with RX_MSDU_END_INFO5_DA_IS_MCBC & info5 is incorrect. It should
use RX_MSDU_END_INFO13_MCAST_BCAST & info13 to get multicast/broadcast
indicator.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231206141759.5430-1-quic_lingbok@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Antipov [Mon, 4 Dec 2023 17:11:28 +0000 (20:11 +0300)]
wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()
[ Upstream commit
fe0a7776d4d19e613bb8dd80fe2d78ae49e8b49d ]
Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()'
should check the return value before examining skb data. So convert
the latter to return an appropriate error code and propagate it to
return from 'wfx_start_ap()' as well. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204171130.141394-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hou Tao [Fri, 8 Dec 2023 10:23:53 +0000 (18:23 +0800)]
bpf: Set uattr->batch.count as zero before batched update or deletion
[ Upstream commit
06e5c999f10269a532304e89a6adb2fbfeb0593c ]
generic_map_{delete,update}_batch() doesn't set uattr->batch.count as
zero before it tries to allocate memory for key. If the memory
allocation fails, the value of uattr->batch.count will be incorrect.
Fix it by setting uattr->batch.count as zero beore batched update or
deletion.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
StanleyYP Wang [Mon, 13 Nov 2023 07:06:19 +0000 (15:06 +0800)]
wifi: mt76: mt7996: add PCI IDs for mt7992
[ Upstream commit
3d3f117a259a65353bf2714a18e25731b3ca5770 ]
Add PCI device IDs to enable mt7992 chipsets support.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
MeiChia Chiu [Thu, 2 Nov 2023 10:03:02 +0000 (18:03 +0800)]
wifi: mt76: connac: fix EHT phy mode check
[ Upstream commit
2c2f50bf6407e1fd43a1a257916aeaa5ffdacd6c ]
Add a BSS eht_support check before returning EHT phy mode. Without this
patch, there might be an inconsistency where the softmac layer thinks
the BSS is in HE mode, while the FW thinks it is in EHT mode.
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nia Espera [Sat, 11 Nov 2023 22:07:42 +0000 (23:07 +0100)]
arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
[ Upstream commit
54ee322f845c7f25fbf6e43e11147b6cae8eff56 ]
In a similar vein to
https://lore.kernel.org/lkml/
20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
the remote processors on sm8350 fail to initialize with the 'correct'
(i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.
Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-4-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neil Armstrong [Mon, 6 Nov 2023 15:58:33 +0000 (16:58 +0100)]
arm64: dts: qcom: sm8450: fix soundwire controllers node name
[ Upstream commit
11fcb81373de52eeb1d3ff135a8d24a4b18978d3 ]
Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: soundwire-controller@31f0000: $nodename:0: 'soundwire-controller@31f0000' does not match '^soundwire(@.*)?$'
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8450-upstream-soundwire-bindings-fix-v1-1-41d4844a5a7d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neil Armstrong [Mon, 6 Nov 2023 14:23:57 +0000 (15:23 +0100)]
arm64: dts: qcom: sm8550: fix soundwire controllers node name
[ Upstream commit
07c88da81caf0e72c3690b689d30f0d325cfeff4 ]
Fix the following dt bindings check:
arch/arm64/boot/dts/qcom/sm8550-mtp.dtb: soundwire-controller@6ab0000: $nodename:0: 'soundwire-controller@6ab0000' does not match '^soundwire(@.*)?$'
from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8550-upstream-soundwire-bindings-fix-v1-1-4ded91c805a1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tobias Waldekranz [Mon, 4 Dec 2023 10:08:10 +0000 (11:08 +0100)]
net: mvmdio: Avoid excessive sleeps in polled mode
[ Upstream commit
7dd12fe34686d89c332b1a05104d18d728591f0a ]
Before this change, when operating in polled mode, i.e. no IRQ is
available, every individual C45 access would be hit with a 150us sleep
after the bus access.
For example, on a board with a CN9130 SoC connected to an MV88X3310
PHY, a single C45 read would take around 165us:
root@infix:~$ mdio
f212a600.mdio-mii mmd 4:1 bench 0xc003
Performed 1000 reads in 165ms
By replacing the long sleep with a tighter poll loop, we observe a 10x
increase in bus throughput:
root@infix:~$ mdio
f212a600.mdio-mii mmd 4:1 bench 0xc003
Performed 1000 reads in 15ms
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231204100811.2708884-3-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Laight [Mon, 18 Sep 2023 08:19:25 +0000 (08:19 +0000)]
minmax: relax check to allow comparison between unsigned arguments and signed constants
commit
867046cc7027703f60a46339ffde91a1970f2901 upstream.
Allow (for example) min(unsigned_var, 20).
The opposite min(signed_var, 20u) is still errored.
Since a comparison between signed and unsigned never makes the unsigned
value negative it is only necessary to adjust the __types_ok() test.
Link: https://lkml.kernel.org/r/633b64e2f39e46bb8234809c5595b8c7@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Laight [Mon, 18 Sep 2023 08:18:40 +0000 (08:18 +0000)]
minmax: allow comparisons of 'int' against 'unsigned char/short'
commit
4ead534fba42fc4fd41163297528d2aa731cd121 upstream.
Since 'unsigned char/short' get promoted to 'signed int' it is safe to
compare them against an 'int' value.
Link: https://lkml.kernel.org/r/8732ef5f809c47c28a7be47c938b28d4@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Laight [Mon, 18 Sep 2023 08:17:57 +0000 (08:17 +0000)]
minmax: fix indentation of __cmp_once() and __clamp_once()
commit
f4b84b2ff851f01d0fac619eadef47eb41648534 upstream.
Remove the extra indentation and align continuation markers.
Link: https://lkml.kernel.org/r/bed41317a05c498ea0209eafbcab45a5@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Laight [Mon, 18 Sep 2023 08:17:15 +0000 (08:17 +0000)]
minmax: allow min()/max()/clamp() if the arguments have the same signedness.
commit
d03eba99f5bf7cbc6e2fdde3b6fa36954ad58e09 upstream.
The type-check in min()/max() is there to stop unexpected results if a
negative value gets converted to a large unsigned value. However it also
rejects 'unsigned int' v 'unsigned long' compares which are common and
never problematc.
Replace the 'same type' check with a 'same signedness' check.
The new test isn't itself a compile time error, so use static_assert() to
report the error and give a meaningful error message.
Due to the way builtin_choose_expr() works detecting the error in the
'non-constant' side (where static_assert() can be used) also detects
errors when the arguments are constant.
Link: https://lkml.kernel.org/r/fe7e6c542e094bfca655abcd323c1c98@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Laight [Mon, 18 Sep 2023 08:16:30 +0000 (08:16 +0000)]
minmax: add umin(a, b) and umax(a, b)
commit
80fcac55385ccb710d33a20dc1caaef29bd5a921 upstream.
Patch series "minmax: Relax type checks in min() and max()", v4.
The min() (etc) functions in minmax.h require that the arguments have
exactly the same types.
However when the type check fails, rather than look at the types and fix
the type of a variable/constant, everyone seems to jump on min_t(). In
reality min_t() ought to be rare - when something unusual is being done,
not normality.
The orginal min() (added in 2.4.9) replaced several inline functions and
included the type - so matched the implicit casting of the function call.
This was renamed min_t() in 2.4.10 and the current min() added. There is
no actual indication that the conversion of negatve values to large
unsigned values has ever been an actual problem.
A quick grep shows 5734 min() and 4597 min_t(). Having the casts on
almost half of the calls shows that something is clearly wrong.
If the wrong type is picked (and it is far too easy to pick the type of
the result instead of the larger input) then significant bits can get
discarded.
Pretty much the worst example is in the derived clamp_val(), consider:
unsigned char x = 200u;
y = clamp_val(x, 10u, 300u);
I also suspect that many of the min_t(u16, ...) are actually wrong. For
example copy_data() in printk_ringbuffer.c contains:
data_size = min_t(u16, buf_size, len);
Here buf_size is 'unsigned int' and len 'u16', pass a 64k buffer (can you
prove that doesn't happen?) and no data is returned. Apparantly it did -
and has since been fixed.
The only reason that most of the min_t() are 'fine' is that pretty much
all the values in the kernel are between 0 and INT_MAX.
Patch 1 adds umin(), this uses integer promotions to convert both
arguments to 'unsigned long long'. It can be used to compare a signed
type that is known to contain a non-negative value with an unsigned type.
The compiler typically optimises it all away. Added first so that it can
be referred to in patch 2.
Patch 2 replaces the 'same type' check with a 'same signedness' one. This
makes min(unsigned_int_var, sizeof()) be ok. The error message is also
improved and will contain the expanded form of both arguments (useful for
seeing how constants are defined).
Patch 3 just fixes some whitespace.
Patch 4 allows comparisons of 'unsigned char' and 'unsigned short' to
signed types. The integer promotion rules convert them both to 'signed
int' prior to the comparison so they can never cause a negative value be
converted to a large positive one.
Patch 5 (rewritted for v4) allows comparisons of unsigned values against
non-negative constant integer expressions. This makes
min(unsigned_int_var, 4) be ok.
The only common case that is still errored is the comparison of signed
values against unsigned constant integer expressions below __INT_MAX__.
Typcally min(int_val, sizeof (foo)), the real fix for this is casting the
constant: min(int_var, (int)sizeof (foo)).
With all the patches applied pretty much all the min_t() could be replaced
by min(), and most of the rest by umin(). However they all need careful
inspection due to code like:
sz = min_t(unsigned char, sz - 1, LIM - 1) + 1;
which converts 0 to LIM.
This patch (of 6):
umin() and umax() can be used when min()/max() errors a signed v unsigned
compare when the signed value is known to be non-negative.
Unlike min_t(some_unsigned_type, a, b) umin() will never mask off high
bits if an inappropriate type is selected.
The '+ 0u + 0ul + 0ull' may look strange.
The '+ 0u' is needed for 'signed int' on 64bit systems.
The '+ 0ul' is needed for 'signed long' on 32bit systems.
The '+ 0ull' is needed for 'signed long long'.
Link: https://lkml.kernel.org/r/b97faef60ad24922b530241c5d7c933c@AcuMS.aculab.com
Link: https://lkml.kernel.org/r/41d93ca827a248698ec64bf57e0c05a5@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Tue, 12 Sep 2023 09:23:55 +0000 (12:23 +0300)]
minmax: fix header inclusions
commit
f6e9d38f8eb00ac8b52e6d15f6aa9bcecacb081b upstream.
BUILD_BUG_ON*() macros are defined in build_bug.h. Include it. Replace
compiler_types.h by compiler.h, which provides the former, to have a
definition of the __UNIQUE_ID().
Link: https://lkml.kernel.org/r/20230912092355.79280-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Mon, 11 Sep 2023 15:49:13 +0000 (18:49 +0300)]
minmax: deduplicate __unconst_integer_typeof()
commit
5e57418a2031cd5e1863efdf3d7447a16a368172 upstream.
It appears that compiler_types.h already have an implementation of the
__unconst_integer_typeof() called __unqual_scalar_typeof(). Use it
instead of the copy.
Link: https://lkml.kernel.org/r/20230911154913.4176033-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Reinecke [Wed, 29 Nov 2023 16:58:31 +0000 (17:58 +0100)]
scsi: libfc: Fix up timeout error in fc_fcp_rec_error()
[ Upstream commit
53122a49f49796beb2c4a1bb702303b66347e29f ]
We should set the status to FC_TIMED_OUT when a timeout error is passed to
fc_fcp_rec_error().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231129165832.224100-3-hare@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hannes Reinecke [Wed, 29 Nov 2023 16:58:30 +0000 (17:58 +0100)]
scsi: libfc: Don't schedule abort twice
[ Upstream commit
b57c4db5d23b9df0118a25e2441c9288edd73710 ]
The current FC error recovery is sending up to three REC (recovery) frames
in 10 second intervals, and as a final step sending an ABTS after 30
seconds for the command itself. Unfortunately sending an ABTS is also the
action for the SCSI abort handler, and the default timeout for SCSI
commands is also 30 seconds. This causes two ABTS to be scheduled, with the
libfc one slightly earlier. The ABTS scheduled by SCSI EH then sees the
command to be already aborted, and will always return with a 'GOOD' status
irrespective on the actual result from the first ABTS. This causes the
SCSI EH abort handler to always succeed, and SCSI EH never to be engaged.
Fix this by not issuing an ABTS when a SCSI command is present for the
exchange, but rather wait for the abort scheduled from SCSI EH. And warn
if an abort is already scheduled to avoid similar errors in the future.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231129165832.224100-2-hare@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kang Yang [Fri, 1 Dec 2023 16:09:48 +0000 (18:09 +0200)]
wifi: ath12k: fix and enable AP mode for WCN7850
[ Upstream commit
ed7e818a7b501012038d6bc6fedadaf7375a380a ]
For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again. Then an
error will return which makes AP mode startup fail.
Kernel log:
[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22
wpa_supplicant log:
Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED
So fix this check and enable AP mode for WCN7850, as now AP mode works normally.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hou Tao [Mon, 4 Dec 2023 14:04:21 +0000 (22:04 +0800)]
bpf: Set need_defer as false when clearing fd array during map free
[ Upstream commit
79d93b3c6ffd79abcd8e43345980aa1e904879c4 ]
Both map deletion operation, map release and map free operation use
fd_array_map_delete_elem() to remove the element from fd array and
need_defer is always true in fd_array_map_delete_elem(). For the map
deletion operation and map release operation, need_defer=true is
necessary, because the bpf program, which accesses the element in fd
array, may still alive. However for map free operation, it is certain
that the bpf program which owns the fd array has already been exited, so
setting need_defer as false is appropriate for map free operation.
So fix it by adding need_defer parameter to bpf_fd_array_map_clear() and
adding a new helper __fd_array_map_delete_elem() to handle the map
deletion, map release and map free operations correspondingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hou Tao [Mon, 4 Dec 2023 14:04:19 +0000 (22:04 +0800)]
bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers
[ Upstream commit
169410eba271afc9f0fb476d996795aa26770c6d ]
These three bpf_map_{lookup,update,delete}_elem() helpers are also
available for sleepable bpf program, so add the corresponding lock
assertion for sleepable bpf program, otherwise the following warning
will be reported when a sleepable bpf program manipulates bpf map under
interpreter mode (aka bpf_jit_enable=0):
WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ......
CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:bpf_map_lookup_elem+0x54/0x60
......
Call Trace:
<TASK>
? __warn+0xa5/0x240
? bpf_map_lookup_elem+0x54/0x60
? report_bug+0x1ba/0x1f0
? handle_bug+0x40/0x80
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1b/0x20
? __pfx_bpf_map_lookup_elem+0x10/0x10
? rcu_lockdep_current_cpu_online+0x65/0xb0
? rcu_is_watching+0x23/0x50
? bpf_map_lookup_elem+0x54/0x60
? __pfx_bpf_map_lookup_elem+0x10/0x10
___bpf_prog_run+0x513/0x3b70
__bpf_prog_run32+0x9d/0xd0
? __bpf_prog_enter_sleepable_recur+0xad/0x120
? __bpf_prog_enter_sleepable_recur+0x3e/0x120
bpf_trampoline_6442580665+0x4d/0x1000
__x64_sys_getpgid+0x5/0x30
? do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chih-Kang Chang [Wed, 29 Nov 2023 07:00:46 +0000 (15:00 +0800)]
wifi: rtw89: fix misbehavior of TX beacon in concurrent mode
[ Upstream commit
756b31203d482d2dd1aa6c208978b0410dc7530f ]
In concurrent mode, when STA interface is scanning, it causes
AP interface TX beacon on wrong channel. We modified it to scan
with the operating channel when one of the interfaces is already
connected. Additionally, STA interface need to stop scan when AP
interface is starting to avoid TX beacon on wrong channel. Finally,
AP interface need to stop TX beacon when STA interface is scanning
and switching to non-OP channel,This prevent other device to get
beacons on wrong channel.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231129070046.18443-5-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baochen Qiang [Fri, 17 Nov 2023 00:39:19 +0000 (08:39 +0800)]
wifi: ath11k: fix race due to setting ATH11K_FLAG_EXT_IRQ_ENABLED too early
[ Upstream commit
5082b3e3027eae393a4e86874bffb4ce3f83c26e ]
We are seeing below error randomly in the case where only
one MSI vector is configured:
kernel: ath11k_pci 0000:03:00.0: wmi command 16387 timeout
The reason is, currently, in ath11k_pcic_ext_irq_enable(),
ATH11K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled.
This results in a race condition: after
ATH11K_FLAG_EXT_IRQ_ENABLED is set but before NAPI enabled,
CE interrupt breaks in. Since IRQ is shared by CE and data
path, ath11k_pcic_ext_interrupt_handler() is also called
where we call disable_irq_nosync() to disable IRQ. Then
napi_schedule() is called but it does nothing because NAPI
is not enabled at that time, meaning
ath11k_pcic_ext_grp_napi_poll() will never run, so we have
no chance to call enable_irq() to enable IRQ back. Finally
we get above error.
Fix it by setting ATH11K_FLAG_EXT_IRQ_ENABLED after all
NAPI and IRQ work are done. With the fix, we are sure that
by the time ATH11K_FLAG_EXT_IRQ_ENABLED is set, NAPI is
enabled.
Note that the fix above also introduce some side effects:
if ath11k_pcic_ext_interrupt_handler() breaks in after NAPI
enabled but before ATH11K_FLAG_EXT_IRQ_ENABLED set, nothing
will be done by the handler this time, the work will be
postponed till the next time the IRQ fires.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231117003919.26218-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minsuk Kang [Wed, 22 Nov 2023 18:31:04 +0000 (20:31 +0200)]
wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus()
[ Upstream commit
2adc886244dff60f948497b59affb6c6ebb3c348 ]
Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug
occurs when txs->cnt, data from a URB provided by a USB device, is
bigger than the size of the array txs->txstatus, which is
HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug
handling code after the check. Make the function return if that is the
case.
Found by a modified version of syzkaller.
UBSAN: array-index-out-of-bounds in htc_drv_txrx.c
index 13 is out of range for type '__wmi_event_txstatus [12]'
Call Trace:
ath9k_htc_txstatus
ath9k_wmi_event_tasklet
tasklet_action_common
__do_softirq
irq_exit_rxu
sysvec_apic_timer_interrupt
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113065756.1491991-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Mon, 27 Nov 2023 05:03:42 +0000 (21:03 -0800)]
bpf: Fix a few selftest failures due to llvm18 change
[ Upstream commit
b16904fd9f01b580db357ef2b1cc9e86d89576c2 ]
With latest upstream llvm18, the following test cases failed:
$ ./test_progs -j
#13/2 bpf_cookie/multi_kprobe_link_api:FAIL
#13/3 bpf_cookie/multi_kprobe_attach_api:FAIL
#13 bpf_cookie:FAIL
#77 fentry_fexit:FAIL
#78/1 fentry_test/fentry:FAIL
#78 fentry_test:FAIL
#82/1 fexit_test/fexit:FAIL
#82 fexit_test:FAIL
#112/1 kprobe_multi_test/skel_api:FAIL
#112/2 kprobe_multi_test/link_api_addrs:FAIL
[...]
#112 kprobe_multi_test:FAIL
#356/17 test_global_funcs/global_func17:FAIL
#356 test_global_funcs:FAIL
Further analysis shows llvm upstream patch [1] is responsible for the above
failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c,
without [1], the asm code is:
0000000000000400 <bpf_fentry_test7>:
400: f3 0f 1e fa endbr64
404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9>
409: 48 89 f8 movq %rdi, %rax
40c: c3 retq
40d: 0f 1f 00 nopl (%rax)
... and with [1], the asm code is:
0000000000005d20 <bpf_fentry_test7.specialized.1>:
5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5>
5d25: c3 retq
... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7>
and this caused test failures for #13/#77 etc. except #356.
For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog
looks like:
0000000000000000 <global_func17>:
0: b4 00 00 00 2a 00 00 00 w0 = 0x2a
1: 95 00 00 00 00 00 00 00 exit
... which passed verification while the test itself expects a verification
failure.
Let us add 'barrier_var' style asm code in both places to prevent function
specialization which caused selftests failure.
[1] https://github.com/llvm/llvm-project/pull/72903
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Thu, 12 Oct 2023 08:15:55 +0000 (10:15 +0200)]
ARM: dts: imx7s: Fix nand-controller #size-cells
[ Upstream commit
4aadb841ed49bada1415c48c44d21f5b69e01299 ]
nand-controller.yaml bindings says #size-cells shall be set to 0.
Fixes the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: nand-controller@
33002000:
#size-cells:0:0: 0 was expected
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Thu, 12 Oct 2023 08:15:54 +0000 (10:15 +0200)]
ARM: dts: imx7s: Fix lcdif compatible
[ Upstream commit
5f55da4cc37051cda600ea870ce8cf29f1297715 ]
imx7d-lcdif is compatible to imx6sx-lcdif. MXSFB_V6 supports overlay
by using LCDC_AS_CTRL register. This registers used by overlay plane:
* LCDC_AS_CTRL
* LCDC_AS_BUF
* LCDC_AS_NEXT_BUF
are listed in i.MX7D RM as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Thu, 12 Oct 2023 08:15:53 +0000 (10:15 +0200)]
ARM: dts: imx7d: Fix coresight funnel ports
[ Upstream commit
0d4ac04fa7c3f6dc263dba6f575a2ec7a2d4eca8 ]
imx7d uses two ports for 'in-ports', so the syntax port@<num> has to
be used. imx7d has both port and port@1 nodes present, raising these
error:
funnel@
30041000: in-ports: More than one condition true in oneOf schema
funnel@
30041000: Unevaluated properties are not allowed
('in-ports' was unexpected)
Fix this by also using port@0 for imx7s as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ching Huang [Mon, 2 Oct 2023 09:50:27 +0000 (17:50 +0800)]
scsi: arcmsr: Support new PCI device IDs 1883 and 1886
[ Upstream commit
41c8a1a1e90fa4721f856bf3cf71211fd16d6434 ]
Add support for Areca RAID controllers with PCI device IDs 1883 and 1886.
Signed-off-by: ching Huang <ching2048@areca.com.tw>
Link: https://lore.kernel.org/r/7732e743eaad57681b1552eec9c6a86c76dbe459.camel@areca.com.tw
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sumit Saxena [Thu, 23 Nov 2023 16:01:29 +0000 (21:31 +0530)]
scsi: mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116
[ Upstream commit
c9260ff28ee561fca5f96425c9328a9698e8427b ]
Add PCI IDs checks for the cases where SAS5116 diverges from SAS4116 in
behavior.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-3-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sumit Saxena [Thu, 23 Nov 2023 16:01:28 +0000 (21:31 +0530)]
scsi: mpi3mr: Add support for SAS5116 PCI IDs
[ Upstream commit
6fa21eab82be57a3ad2470fac27b982793805336 ]
Add support for Broadcom's SAS5116 IO/RAID controllers PCI IDs.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231123160132.4155-2-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Ignacio Tornos Martinez [Mon, 20 Nov 2023 12:11:41 +0000 (13:11 +0100)]
net: usb: ax88179_178a: avoid two consecutive device resets
[ Upstream commit
d2689b6a86b9d23574bd4b654bf770b6034e2c7e ]
The device is always reset two consecutive times (ax88179_reset is called
twice), one from usbnet_probe during the device binding and the other from
usbnet_open.
Remove the non-necessary reset during the device binding and let the reset
operation from open to keep the normal behavior (tested with generic ASIX
Electronics Corp. AX88179 Gigabit Ethernet device).
Reported-by: Herb Wei <weihao.bj@ieisystem.com>
Tested-by: Herb Wei <weihao.bj@ieisystem.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20231120121239.54504-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengchao Shao [Sat, 18 Nov 2023 08:16:53 +0000 (16:16 +0800)]
bonding: return -ENOMEM instead of BUG in alb_upper_dev_walk
[ Upstream commit
d6b83f1e3707c4d60acfa58afd3515e17e5d5384 ]
If failed to allocate "tags" or could not find the final upper device from
start_dev's upper list in bond_verify_device_path(), only the loopback
detection of the current upper device should be affected, and the system is
no need to be panic.
So return -ENOMEM in alb_upper_dev_walk to stop walking, print some warn
information when failed to allocate memory for vlan tags in
bond_verify_device_path.
I also think that the following function calls
netdev_walk_all_upper_dev_rcu
---->>>alb_upper_dev_walk
---------->>>bond_verify_device_path
From this way, "end device" can eventually be obtained from "start device"
in bond_verify_device_path, IS_ERR(tags) could be instead of
IS_ERR_OR_NULL(tags) in alb_upper_dev_walk.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20231118081653.1481260-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ido Schimmel [Wed, 15 Nov 2023 12:17:16 +0000 (13:17 +0100)]
PCI: Add no PM reset quirk for NVIDIA Spectrum devices
[ Upstream commit
3ed48c80b28d8dcd584d6ddaf00c75b7673e1a05 ]
Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a
reset (i.e., they advertise NoSoftRst-). However, this transition does
not have any effect on the device: It continues to be operational and
network ports remain up. Advertising this support makes it seem as if a
PM reset is viable for these devices. Mark it as unavailable to skip it
when testing reset methods.
Before:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
pm bus
After:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
bus
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kory Maincent [Tue, 14 Nov 2023 11:28:34 +0000 (12:28 +0100)]
net: phy: micrel: fix ts_info value in case of no phc
[ Upstream commit
915d25a9d69be969c1cc6c1dd0c3861f6da7b55e ]
In case of no phc we should not return SOFTWARE TIMESTAMPING flags as we do
not know whether the netdev supports of timestamping.
Remove it from the lan8841_ts_info and simply return 0.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Sat, 22 Jul 2023 12:17:19 +0000 (14:17 +0200)]
ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges
[ Upstream commit
07e6a553c2f1d385edfc9185081dee442a9dd38d ]
The camera node has both unit address and children within the same bus
mapping, thus needs proper ranges property to fix dtc W=1 warnings:
Warning (unit_address_vs_reg): /soc/camera@
fa600000: node has a unit name, but no reg or ranges property
Warning (simple_bus_reg): /soc/camera@
fa600000: missing or empty reg/ranges property
Subtract 0xfa600000 from all its children nodes. No functional impact
expected.
Link: https://lore.kernel.org/r/20230722121719.150094-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Sat, 22 Jul 2023 12:17:18 +0000 (14:17 +0200)]
ARM: dts: samsung: exynos4: fix camera unit addresses/ranges
[ Upstream commit
ba2a45a48503665f7e8eeec51f8b40456566b0cd ]
The camera node has both unit address and children within the same bus
mapping, thus needs proper ranges property to fix dtc W=1 warnings:
Warning (unit_address_vs_reg): /soc/camera@
11800000: node has a unit name, but no reg or ranges property
Warning (simple_bus_reg): /soc/camera@
11800000: missing or empty reg/ranges property
Subtract 0x11800000 from all its children nodes. No functional impact
expected.
Link: https://lore.kernel.org/r/20230722121719.150094-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Tee [Tue, 31 Oct 2023 19:12:17 +0000 (12:12 -0700)]
scsi: lpfc: Fix possible file string name overflow when updating firmware
[ Upstream commit
f5779b529240b715f0e358489ad0ed933bf77c97 ]
Because file_name and phba->ModelName are both declared a size 80 bytes,
the extra ".grp" file extension could cause an overflow into file_name.
Define a ELX_FW_NAME_SIZE macro with value 84. 84 incorporates the 4 extra
characters from ".grp". file_name is changed to be declared as a char and
initialized to zeros i.e. null chars.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-3-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tanmay Shah [Fri, 27 Oct 2023 18:23:59 +0000 (23:53 +0530)]
soc: xilinx: fix unhandled SGI warning message
[ Upstream commit
9c6724abf969251af53cdae525ad8100ec78d3c2 ]
Xen broadcasts SGI to each VM when multiple VMs run on Xen hypervisor. In
such case spurious SGI is expected if one event is registered by one VM and
not registered by another VM. We let users know that Unhandled SGI is not
error and expected if kernel is running on Xen hypervisor.
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1698431039-2734260-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
HariBabu Gattem [Fri, 27 Oct 2023 05:56:22 +0000 (22:56 -0700)]
soc: xilinx: Fix for call trace due to the usage of smp_processor_id()
[ Upstream commit
daed80ed07580e5adc0e6d8bc79933a35154135a ]
When preemption is enabled in kernel and if any task which can be
preempted should not use smp_processor_id() directly, since CPU
switch can happen at any time, the previous value of cpu_id
differs with current cpu_id. As a result we see the below call trace
during xlnx_event_manager_probe.
[ 6.140197] dump_backtrace+0x0/0x190
[ 6.143884] show_stack+0x18/0x40
[ 6.147220] dump_stack_lvl+0x7c/0xa0
[ 6.150907] dump_stack+0x18/0x34
[ 6.154241] check_preemption_disabled+0x124/0x134
[ 6.159068] debug_smp_processor_id+0x20/0x2c
[ 6.163453] xlnx_event_manager_probe+0x48/0x250
To protect cpu_id, It is recommended to use get_cpu()/put_cpu()
to disable preemption, get the cpu_id and enable preemption respectively.
(For Reference, Documentation/locking/preempt-locking.rst and
Documentation/kernel-hacking/hacking.rst)
Use preempt_disable()/smp_processor_id()/preempt_enable()
API's to achieve the same.
Signed-off-by: HariBabu Gattem <haribabu.gattem@xilinx.com>
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231027055622.21544-1-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 28 Sep 2023 11:02:43 +0000 (14:02 +0300)]
ARM: dts: qcom: msm8660: fix PMIC node labels
[ Upstream commit
c6d86aa8a12194d1c9c2f9108910a46c8a3ddc90 ]
Change PM8058 node labels to start with pm8058_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-11-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 28 Sep 2023 11:02:42 +0000 (14:02 +0300)]
ARM: dts: qcom: mdm9615: fix PMIC node labels
[ Upstream commit
0e4688cd4ee6efbeae2b31f75e16961fd7f72735 ]
Change PM8018 node labels to start with pm8018_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-10-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 28 Sep 2023 11:02:40 +0000 (14:02 +0300)]
ARM: dts: qcom: strip prefix from PMIC files
[ Upstream commit
455a4c46e023ab84263eae0fc7acca9a5ee8b7ac ]
As the vendor DTS files were moved to per-vendor subdirs, there no need
to use common prefixes. Drop the `qcom-' prefix from PMIC dtsi file.
This makes 32-bit qcom/ dts files closer to arm64 ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yafang Shao [Sat, 11 Nov 2023 09:00:30 +0000 (09:00 +0000)]
selftests/bpf: Fix issues in setup_classid_environment()
[ Upstream commit
4849775587844e44d215289c425bcd70f315efe7 ]
If the net_cls subsystem is already mounted, attempting to mount it again
in setup_classid_environment() will result in a failure with the error code
EBUSY. Despite this, tmpfs will have been successfully mounted at
/sys/fs/cgroup/net_cls. Consequently, the /sys/fs/cgroup/net_cls directory
will be empty, causing subsequent setup operations to fail.
Here's an error log excerpt illustrating the issue when net_cls has already
been mounted at /sys/fs/cgroup/net_cls prior to running
setup_classid_environment():
- Before that change
$ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2
test_cgroup_v1v2:PASS:server_fd 0 nsec
test_cgroup_v1v2:PASS:client_fd 0 nsec
test_cgroup_v1v2:PASS:cgroup_fd 0 nsec
test_cgroup_v1v2:PASS:server_fd 0 nsec
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs
(cgroup_helpers.c:540: errno: No such file or directory) Opening cgroup classid: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/net_cls.classid
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/cgroup.procs
run_test:FAIL:join_classid unexpected error: 1 (errno 2)
test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 2)
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs
#44 cgroup_v1v2:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
- After that change
$ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2
#44 cgroup_v1v2:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231111090034.4248-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shiji Yang [Thu, 9 Nov 2023 04:38:51 +0000 (12:38 +0800)]
wifi: rt2x00: correct wrong BBP register in RxDCOC calibration
[ Upstream commit
50da74e1e8b682853d1e07fc8bbe3a0774ae5e09 ]
Refer to Mediatek vendor driver RxDCOC_Calibration() function, when
performing gainfreeze calibration, we should write register 140
instead of 141. This fix can reduce the total calibration time from
6 seconds to 1 second.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB0315B13B89DF57B6B27BB854BCAFA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Fri, 10 Nov 2023 19:36:44 +0000 (11:36 -0800)]
selftests/bpf: Fix pyperf180 compilation failure with clang18
[ Upstream commit
100888fb6d8a185866b1520031ee7e3182b173de ]
With latest clang18 (main branch of llvm-project repo), when building bpf selftests,
[~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j
The following compilation error happens:
fatal error: error in backend: Branch target out of insn range
...
Stack dump:
0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi
-I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter
/home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include
-idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf
-c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o
1. <eof> parser at end of file
2. Code generation
...
The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay
since cpu=v4 supports 32-bit branch target offset.
The above failure is due to upstream llvm patch [1] where some inlining behavior
are changed in clang18.
To workaround the issue, previously all 180 loop iterations are fully unrolled.
The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid
unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the
compiler is clang18, the unrollng amount is unconditionally reduced.
[1] https://github.com/llvm/llvm-project/commit/
1a2e77cf9e11dbf56b5720c607313a566eebb16e
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Tue, 7 Nov 2023 20:15:11 +0000 (12:15 -0800)]
libbpf: Fix potential uninitialized tail padding with LIBBPF_OPTS_RESET
[ Upstream commit
7f7c43693c1b46652cfafb7af67ba31726d6ec4e ]
Martin reported that there is a libbpf complaining of non-zero-value tail
padding with LIBBPF_OPTS_RESET macro if struct bpf_netkit_opts is modified
to have a 4-byte tail padding. This only happens to clang compiler.
The commend line is: ./test_progs -t tc_netkit_multi_links
Martin and I did some investigation and found this indeed the case and
the following are the investigation details.
Clang:
clang version 18.0.0
<I tried clang15/16/17 and they all have similar results>
tools/lib/bpf/libbpf_common.h:
#define LIBBPF_OPTS_RESET(NAME, ...) \
do { \
memset(&NAME, 0, sizeof(NAME)); \
NAME = (typeof(NAME)) { \
.sz = sizeof(NAME), \
__VA_ARGS__ \
}; \
} while (0)
#endif
tools/lib/bpf/libbpf.h:
struct bpf_netkit_opts {
/* size of this struct, for forward/backward compatibility */
size_t sz;
__u32 flags;
__u32 relative_fd;
__u32 relative_id;
__u64 expected_revision;
size_t :0;
};
#define bpf_netkit_opts__last_field expected_revision
In the above struct bpf_netkit_opts, there is no tail padding.
prog_tests/tc_netkit.c:
static void serial_test_tc_netkit_multi_links_target(int mode, int target)
{
...
LIBBPF_OPTS(bpf_netkit_opts, optl);
...
LIBBPF_OPTS_RESET(optl,
.flags = BPF_F_BEFORE,
.relative_fd = bpf_program__fd(skel->progs.tc1),
);
...
}
Let us make the following source change, note that we have a 4-byte
tailing padding now.
# diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h
# index
6cd9c501624f..
0dd83910ae9a 100644
# --- a/tools/lib/bpf/libbpf.h
# +++ b/tools/lib/bpf/libbpf.h
# @@ -803,13 +803,13 @@ bpf_program__attach_tcx(const struct bpf_program *prog, int ifindex,
# struct bpf_netkit_opts {
# /* size of this struct, for forward/backward compatibility */
# size_t sz;
# - __u32 flags;
# __u32 relative_fd;
# __u32 relative_id;
# __u64 expected_revision;
# + __u32 flags;
# size_t :0;
# };
# -#define bpf_netkit_opts__last_field expected_revision
# +#define bpf_netkit_opts__last_field flags
The clang 18 generated asm code looks like below:
; LIBBPF_OPTS_RESET(optl,
55e3: 48 8d 7d 98 leaq -0x68(%rbp), %rdi
55e7: 31 f6 xorl %esi, %esi
55e9: ba 20 00 00 00 movl $0x20, %edx
55ee: e8 00 00 00 00 callq 0x55f3 <serial_test_tc_netkit_multi_links_target+0x18d3>
55f3: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp)
55fe: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax
5605: 48 8b 78 18 movq 0x18(%rax), %rdi
5609: e8 00 00 00 00 callq 0x560e <serial_test_tc_netkit_multi_links_target+0x18ee>
560e: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp)
5614: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp)
561e: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp)
5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp)
5633: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax
563a: 48 89 45 98 movq %rax, -0x68(%rbp)
563e: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax
5645: 48 89 45 a0 movq %rax, -0x60(%rbp)
5649: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax
5650: 48 89 45 a8 movq %rax, -0x58(%rbp)
5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax
565b: 48 89 45 b0 movq %rax, -0x50(%rbp)
; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl);
At -O0 level, the clang compiler creates an intermediate copy.
We have below to store 'flags' with 4-byte store and leave another 4 byte
in the same 8-byte-aligned storage undefined,
5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp)
and later we store 8-byte to the original zero'ed buffer
5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax
565b: 48 89 45 b0 movq %rax, -0x50(%rbp)
This caused a problem as the 4-byte value at [%rbp-0x2dc, %rbp-0x2e0)
may be garbage.
gcc (gcc 11.4) does not have this issue as it does zeroing struct first before
doing assignments:
; LIBBPF_OPTS_RESET(optl,
50fd: 48 8d 85 40 fc ff ff leaq -0x3c0(%rbp), %rax
5104: ba 20 00 00 00 movl $0x20, %edx
5109: be 00 00 00 00 movl $0x0, %esi
510e: 48 89 c7 movq %rax, %rdi
5111: e8 00 00 00 00 callq 0x5116 <serial_test_tc_netkit_multi_links_target+0x1522>
5116: 48 8b 45 f0 movq -0x10(%rbp), %rax
511a: 48 8b 40 18 movq 0x18(%rax), %rax
511e: 48 89 c7 movq %rax, %rdi
5121: e8 00 00 00 00 callq 0x5126 <serial_test_tc_netkit_multi_links_target+0x1532>
5126: 48 c7 85 40 fc ff ff 00 00 00 00 movq $0x0, -0x3c0(%rbp)
5131: 48 c7 85 48 fc ff ff 00 00 00 00 movq $0x0, -0x3b8(%rbp)
513c: 48 c7 85 50 fc ff ff 00 00 00 00 movq $0x0, -0x3b0(%rbp)
5147: 48 c7 85 58 fc ff ff 00 00 00 00 movq $0x0, -0x3a8(%rbp)
5152: 48 c7 85 40 fc ff ff 20 00 00 00 movq $0x20, -0x3c0(%rbp)
515d: 89 85 48 fc ff ff movl %eax, -0x3b8(%rbp)
5163: c7 85 58 fc ff ff 08 00 00 00 movl $0x8, -0x3a8(%rbp)
; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl);
It is not clear how to resolve the compiler code generation as the compiler
generates correct code w.r.t. how to handle unnamed padding in C standard.
So this patch changed LIBBPF_OPTS_RESET macro to avoid uninitialized tail
padding. We already knows LIBBPF_OPTS macro works on both gcc and clang,
even with tail padding. So LIBBPF_OPTS_RESET is changed to be a
LIBBPF_OPTS followed by a memcpy(), thus avoiding uninitialized tail padding.
The below is asm code generated with this patch and with clang compiler:
; LIBBPF_OPTS_RESET(optl,
55e3: 48 8d bd 10 fd ff ff leaq -0x2f0(%rbp), %rdi
55ea: 31 f6 xorl %esi, %esi
55ec: ba 20 00 00 00 movl $0x20, %edx
55f1: e8 00 00 00 00 callq 0x55f6 <serial_test_tc_netkit_multi_links_target+0x18d6>
55f6: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp)
5601: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax
5608: 48 8b 78 18 movq 0x18(%rax), %rdi
560c: e8 00 00 00 00 callq 0x5611 <serial_test_tc_netkit_multi_links_target+0x18f1>
5611: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp)
5617: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp)
5621: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp)
562c: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp)
5636: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax
563d: 48 89 45 98 movq %rax, -0x68(%rbp)
5641: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax
5648: 48 89 45 a0 movq %rax, -0x60(%rbp)
564c: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax
5653: 48 89 45 a8 movq %rax, -0x58(%rbp)
5657: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax
565e: 48 89 45 b0 movq %rax, -0x50(%rbp)
; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl);
In the above code, a temporary buffer is zeroed and then has proper value assigned.
Finally, values in temporary buffer are copied to the original variable buffer,
hence tail padding is guaranteed to be 0.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20231107201511.2548645-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrii Nakryiko [Thu, 2 Nov 2023 03:37:44 +0000 (20:37 -0700)]
selftests/bpf: satisfy compiler by having explicit return in btf test
[ Upstream commit
f4c7e887324f5776eef6e6e47a90e0ac8058a7a8 ]
Some compilers complain about get_pprint_mapv_size() not returning value
in some code paths. Fix with explicit return.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Thu, 2 Nov 2023 03:37:43 +0000 (20:37 -0700)]
selftests/bpf: fix RELEASE=1 build for tc_opts
[ Upstream commit
2b62aa59d02ed281fa4fc218df3ca91b773e1e62 ]
Compiler complains about malloc(). We also don't need to dynamically
allocate anything, so make the life easier by using statically sized
buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shiji Yang [Sat, 4 Nov 2023 08:58:00 +0000 (16:58 +0800)]
wifi: rt2x00: restart beacon queue when hardware reset
[ Upstream commit
a11d965a218f0cd95b13fe44d0bcd8a20ce134a8 ]
When a hardware reset is triggered, all registers are reset, so all
queues are forced to stop in hardware interface. However, mac80211
will not automatically stop the queue. If we don't manually stop the
beacon queue, the queue will be deadlocked and unable to start again.
This patch fixes the issue where Apple devices cannot connect to the
AP after calling ieee80211_restart_hw().
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB031530EB6D98DCE4DF20766CBCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Antipov [Tue, 24 Oct 2023 14:31:33 +0000 (17:31 +0300)]
wifi: rtw89: fix timeout calculation in rtw89_roc_end()
[ Upstream commit
e416514e309f7e25e577fee45a65f246f67b2261 ]
Since 'rtw89_core_tx_kick_off_and_wait()' assumes timeout
(actually RTW89_ROC_TX_TIMEOUT) in milliseconds, I suppose
that RTW89_ROC_IDLE_TIMEOUT is in milliseconds as well. If
so, 'msecs_to_jiffies()' should be used in a call to
'ieee80211_queue_delayed_work()' from 'rtw89_roc_end()'.
Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231024143137.30393-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baokun Li [Mon, 23 Oct 2023 01:30:56 +0000 (09:30 +0800)]
ext4: avoid online resizing failures due to oversized flex bg
[ Upstream commit
5d1935ac02ca5aee364a449a35e2977ea84509b0 ]
When we online resize an ext4 filesystem with a oversized flexbg_size,
mkfs.ext4 -F -G
67108864 $dev -b 4096 100M
mount $dev $dir
resize2fs $dev 16G
the following WARN_ON is triggered:
==================================================================
WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550
Modules linked in: sg(E)
CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314
RIP: 0010:__alloc_pages+0x411/0x550
Call Trace:
<TASK>
__kmalloc_large_node+0xa2/0x200
__kmalloc+0x16e/0x290
ext4_resize_fs+0x481/0xd80
__ext4_ioctl+0x1616/0x1d90
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xf0/0x150
do_syscall_64+0x3b/0x90
==================================================================
This is because flexbg_size is too large and the size of the new_group_data
array to be allocated exceeds MAX_ORDER. Currently, the minimum value of
MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding
maximum number of groups that can be allocated is:
(PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845
And the value that is down-aligned to the power of 2 is 16384. Therefore,
this value is defined as MAX_RESIZE_BG, and the number of groups added
each time does not exceed this value during resizing, and is added multiple
times to complete the online resizing. The difference is that the metadata
in a flex_bg may be more dispersed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baokun Li [Mon, 23 Oct 2023 01:30:55 +0000 (09:30 +0800)]
ext4: remove unnecessary check from alloc_flex_gd()
[ Upstream commit
b099eb87de105cf07cad731ded6fb40b2675108b ]
In commit
967ac8af4475 ("ext4: fix potential integer overflow in
alloc_flex_gd()"), an overflow check is added to alloc_flex_gd() to
prevent the allocated memory from being smaller than expected due to
the overflow. However, after kmalloc() is replaced with kmalloc_array()
in commit
6da2ec56059c ("treewide: kmalloc() -> kmalloc_array()"), the
kmalloc_array() function has an overflow check, so the above problem
will not occur. Therefore, the extra check is removed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baokun Li [Mon, 23 Oct 2023 01:30:54 +0000 (09:30 +0800)]
ext4: unify the type of flexbg_size to unsigned int
[ Upstream commit
658a52344fb139f9531e7543a6e0015b630feb38 ]
The maximum value of flexbg_size is 2^31, but the maximum value of int
is (2^31 - 1), so overflow may occur when the type of flexbg_size is
declared as int.
For example, when uninit_mask is initialized in ext4_alloc_group_tables(),
if flexbg_size == 2^31, the initialized uninit_mask is incorrect, and this
may causes set_flexbg_block_bitmap() to trigger a BUG_ON().
Therefore, the flexbg_size type is declared as unsigned int to avoid
overflow and memory waste.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ye Bin [Sat, 16 Dec 2023 01:09:19 +0000 (09:09 +0800)]
ext4: fix inconsistent between segment fstrim and full fstrim
[ Upstream commit
68da4c44b994aea797eb9821acb3a4a36015293e ]
Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabriel Krisman Bertazi [Fri, 11 Aug 2023 18:38:12 +0000 (14:38 -0400)]
ecryptfs: Reject casefold directory inodes
[ Upstream commit
cd72c7ef5fed44272272a105b1da22810c91be69 ]
Even though it seems to be able to resolve some names of
case-insensitive directories, the lack of d_hash and d_compare means we
end up with a broken state in the d_cache. Considering it was never a
goal to support these two together, and we are preparing to use
d_revalidate in case-insensitive filesystems, which would make the
combination even more broken, reject any attempt to get a casefolded
inode from ecryptfs.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Sun, 26 Nov 2023 02:55:07 +0000 (23:55 -0300)]
smb: client: fix hardlinking of reparse points
[ Upstream commit
5408990aa662bcfd6ba894734023a023a16e8729 ]
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire hardlink operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Sun, 26 Nov 2023 02:55:06 +0000 (23:55 -0300)]
smb: client: fix renaming of reparse points
[ Upstream commit
7435d51b7ea2ab7801279c43ecd72063e9d5c92f ]
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire rename operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ojaswin Mujoo [Wed, 1 Nov 2023 16:38:10 +0000 (22:08 +0530)]
ext4: treat end of range as exclusive in ext4_zero_range()
[ Upstream commit
92573369144f40397e8514440afdf59f24905b40 ]
The call to filemap_write_and_wait_range() assumes the range passed to be
inclusive, so fix the call to make sure we follow that.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/e503107a7c73a2b68dec645c5ad798c437717c45.1698856309.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anna Schumaker [Mon, 27 Nov 2023 22:06:18 +0000 (17:06 -0500)]
SUNRPC: Fix a suspicious RCU usage warning
[ Upstream commit
31b62908693c90d4d07db597e685d9f25a120073 ]
I received the following warning while running cthon against an ontap
server running pNFS:
[ 57.202521] =============================
[ 57.202522] WARNING: suspicious RCU usage
[ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted
[ 57.202525] -----------------------------
[ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!!
[ 57.202527]
other info that might help us debug this:
[ 57.202528]
rcu_scheduler_active = 2, debug_locks = 1
[ 57.202529] no locks held by test5/3567.
[ 57.202530]
stack backtrace:
[ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492
5b09971b4965c0aceba19f3eea324a4a806e227e
[ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
[ 57.202536] Call Trace:
[ 57.202537] <TASK>
[ 57.202540] dump_stack_lvl+0x77/0xb0
[ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0
[ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc
ebe02571b9a8ceebf7d98e71675af20c19bdb1f6]
[ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files
e3a4187f18ae8a27b630f9feae6831b584a9360a]
[ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files
e3a4187f18ae8a27b630f9feae6831b584a9360a]
[ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202866] write_cache_pages+0x265/0x450
[ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202891] nfs_writepages+0x141/0x230 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202913] do_writepages+0xd2/0x230
[ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80
[ 57.202921] filemap_fdatawrite_wbc+0x67/0x80
[ 57.202924] filemap_write_and_wait_range+0xd9/0x170
[ 57.202930] nfs_wb_all+0x49/0x180 [nfs
6c976fa593a7c2976f5a0aeb4965514a828e6902]
[ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4
c716d88496ded0ea6d289bbea684fa996f9b57a9]
[ 57.202969] __se_sys_close+0x46/0xd0
[ 57.202972] do_syscall_64+0x68/0x100
[ 57.202975] ? do_syscall_64+0x77/0x100
[ 57.202976] ? do_syscall_64+0x77/0x100
[ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 57.202982] RIP: 0033:0x7fe2b12e4a94
[ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3
[ 57.202987] RSP: 002b:
00007ffe857ddb38 EFLAGS:
00000202 ORIG_RAX:
0000000000000003
[ 57.202989] RAX:
ffffffffffffffda RBX:
00007ffe857dfd68 RCX:
00007fe2b12e4a94
[ 57.202991] RDX:
0000000000002000 RSI:
00007ffe857ddc40 RDI:
0000000000000003
[ 57.202992] RBP:
00007ffe857dfc50 R08:
7fffffffffffffff R09:
0000000065650f49
[ 57.202993] R10:
00007fe2b11f8300 R11:
0000000000000202 R12:
0000000000000000
[ 57.202994] R13:
00007ffe857dfd80 R14:
00007fe2b1445000 R15:
0000000000000000
[ 57.202999] </TASK>
The problem seems to be that two out of three callers aren't taking the
rcu_read_lock() before calling the list_for_each_entry_rcu() function in
rpc_xprt_switch_has_addr(). I fix this by having
rpc_xprt_switch_has_addr() unconditionaly take the rcu_read_lock(),
which is okay to do recursively in the case that the lock has already
been taken by a caller.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Granados [Tue, 21 Nov 2023 11:02:18 +0000 (12:02 +0100)]
sysctl: Fix out of bounds access for empty sysctl registers
[ Upstream commit
315552310c7de92baea4e570967066569937a843 ]
When registering tables to the sysctl subsystem there is a check to see
if header is a permanently empty directory (used for mounts). This check
evaluates the first element of the ctl_table. This results in an out of
bounds evaluation when registering empty directories.
The function register_sysctl_mount_point now passes a ctl_table of size
1 instead of size 0. It now relies solely on the type to identify
a permanently empty register.
Make sure that the ctl_table has at least one element before testing for
permanent emptiness.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/
202311201431.
57aae8f3-oliver.sang@intel.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Thu, 30 Nov 2023 17:56:00 +0000 (18:56 +0100)]
KVM: s390: fix setting of fpc register
[ Upstream commit
b988b1bb0053c0dcd26187d29ef07566a565cf55 ]
kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest cpu. The new value is tested for validity by
temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the host process:
if an interrupt happens while the value is temporarily loaded into the fpc
register, and within interrupt context floating point or vector registers
are used, the current fp/vx registers are saved with save_fpu_regs()
assuming they belong to user space and will be loaded into fp/vx registers
when returning to user space.
test_fp_ctl() restores the original user space / host process fpc register
value, however it will be discarded, when returning to user space.
In result the host process will incorrectly continue to run with the value
that was supposed to be used for a guest cpu.
Fix this by simply removing the test. There is another test right before
the SIE context is entered which will handles invalid values.
This results in a change of behaviour: invalid values will now be accepted
instead of that the ioctl fails with -EINVAL. This seems to be acceptable,
given that this interface is most likely not used anymore, and this is in
addition the same behaviour implemented with the memory mapped interface
(replace invalid values with zero) - see sync_regs() in kvm-s390.c.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Thu, 30 Nov 2023 17:55:59 +0000 (18:55 +0100)]
s390/ptrace: handle setting of fpc register correctly
[ Upstream commit
8b13601d19c541158a6e18b278c00ba69ae37829 ]
If the content of the floating point control (fpc) register of a traced
process is modified with the ptrace interface the new value is tested for
validity by temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the tracing process:
if an interrupt happens while the value is temporarily loaded into the
fpc register, and within interrupt context floating point or vector
registers are used, the current fp/vx registers are saved with
save_fpu_regs() assuming they belong to user space and will be loaded into
fp/vx registers when returning to user space.
test_fp_ctl() restores the original user space fpc register value, however
it will be discarded, when returning to user space.
In result the tracer will incorrectly continue to run with the value that
was supposed to be used for the traced process.
Fix this by saving fpu register contents with save_fpu_regs() before using
test_fp_ctl().
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Krowiak [Wed, 8 Nov 2023 20:11:30 +0000 (15:11 -0500)]
s390/vfio-ap: fix sysfs status attribute for AP queue devices
[ Upstream commit
a0d8f4eeb7c4ffaee21702bcc91a09b3988c5b7a ]
The 'status' attribute for AP queue devices bound to the vfio_ap device
driver displays incorrect status when the mediated device is attached to a
guest, but the queue device is not passed through. In the current
implementation, the status displayed is 'in_use' which is not correct; it
should be 'assigned'. This can happen if one of the queue devices
associated with a given adapter is not bound to the vfio_ap device driver.
For example:
Queues listed in /sys/bus/ap/drivers/vfio_ap:
14.0005
14.0006
14.000d
16.0006
16.000d
Queues listed in /sys/devices/vfio_ap/matrix/$UUID/matrix
14.0005
14.0006
14.000d
16.0005
16.0006
16.000d
Queues listed in /sys/devices/vfio_ap/matrix/$UUID/guest_matrix
14.0005
14.0006
14.000d
The reason no queues for adapter 0x16 are listed in the guest_matrix is
because queue 16.0005 is not bound to the vfio_ap device driver, so no
queue associated with the adapter is passed through to the guest;
therefore, each queue device for adapter 0x16 should display 'assigned'
instead of 'in_use', because those queues are not in use by a guest, but
only assigned to the mediated device.
Let's check the AP configuration for the guest to determine whether a
queue device is passed through before displaying a status of 'in_use'.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20231108201135.351419-1-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>