drm/i915: enable platform support for 64K pages

For gen9+ enable platform level support for 64K pages. Also enable for
mock testing.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-21-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-20-chris@chris-wilson.co.uk

drm/i915: disable platform support for vGPU huge gtt pages

Currently gvt gtt handling doesn't support huge page entries, so disable
for now.

v2: remove useless 48b PPGTT check

Suggested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-20-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-19-chris@chris-wilson.co.uk

drm/i915/selftests: mix huge pages

Try to mix sg page sizes for 4K, 64K and 2M pages.

v2: s/BIT(x) >> 12/BIT(x) >> PAGE_SHIFT/

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-19-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-18-chris@chris-wilson.co.uk

drm/i915/selftests: huge page tests

v2: mock test page support configurations and add MI_STORE_DWORD test

v3: run all mockable huge page tests on all platforms via the mock_device

v4: add pin_update regression test
    various improvements suggested by Chris

v5: fix issues reported by kbuild
    test single sg spanning multiple page sizes
    don't explode when running the live-tests through the appgtt

v6: lots of improvements from Chris

v7: run on each engine for igt_write_huge
    add simple tmpfs fallback test

v8: size_t is bad
    don't break the i386 build

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-18-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-17-chris@chris-wilson.co.uk

drm/i915/debugfs: include some gtt page size metrics

Good to know, mostly for debugging purposes.

v2: some improvements from Chris

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-17-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-16-chris@chris-wilson.co.uk

drm/i915: accurate page size tracking for the ppgtt

Now that we support multiple page sizes for the ppgtt, it would be
useful to track the real usage for debugging purposes.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-16-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-15-chris@chris-wilson.co.uk

drm/i915: support 64K pages for the 48b PPGTT

Support inserting 64K pages into the 48b PPGTT.

v2: check for 64K scratch

v3: we should only have to re-adjust maybe_64K at every sg interval

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-15-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-14-chris@chris-wilson.co.uk

drm/i915: add support for 64K scratch page

Before we can fully enable 64K pages, we need to first support a 64K
scratch page if we intend to support the case where we have object sizes
< 2M, since any scratch PTE must also point to a 64K region.  Without
this our 64K usage is limited to objects which completely fill the
page-table, and therefore don't need any scratch.

v2: add reminder about why 48b PPGTT

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-14-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-13-chris@chris-wilson.co.uk

drm/i915: support 2M pages for the 48b PPGTT

Support inserting 2M gtt pages into the 48b PPGTT.

v2: sanity check sg->length against page_size

v3: don't recalculate rem on each loop
    whitespace breakup

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-13-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-12-chris@chris-wilson.co.uk

drm/i915: disable GTT cache for 2M pages

When SW enables the use of 2M/1G pages, it must disable the GTT cache.

v2: don't disable for Cherryview which doesn't even support 48b PPGTT!

v3: explicitly check that the system does support 2M/1G pages

v4: split WA and decision logic

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-12-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-11-chris@chris-wilson.co.uk

drm/i915: enable IPS bit for 64K pages

Before we can enable 64K pages through the IPS bit, we must first enable
it through MMIO, otherwise the page-walker will simply ignore it.

v2: add comment mentioning that 64K is BDW+

v3: move to more suitable home

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-11-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-10-chris@chris-wilson.co.uk

drm/i915: align 64K objects to 2M

We can't mix 64K and 4K pte's in the same page-table, so for now we
align 64K objects to 2M to avoid any potential mixing. This is
potentially wasteful but in reality shouldn't be too bad since this only
applies to the virtual address space of a 48b PPGTT.

v2: don't separate logically connected ops

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-10-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-9-chris@chris-wilson.co.uk

drm/i915: align the vma start to the largest gtt page size

For the 48b PPGTT try to align the vma start address to the required
page size boundary to guarantee we use said page size in the gtt. If we
are dealing with multiple page sizes, we can't guarantee anything and
just align to the largest. For soft pinning and objects which need to be
tightly packed into the lower 32bits we don't force any alignment.

v2: various improvements suggested by Chris

v3: use set_pages and better placement of page_sizes

v4: prefer upper_32_bits()

v5: assign vma->page_sizes = vma->obj->page_sizes directly
    prefer sizeof(vma->page_sizes)

v6: fixup checking of end to exclude GGTT (which are assumed to be
    limited to 4G).

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-9-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-8-chris@chris-wilson.co.uk

drm/i915: introduce vm set_pages/clear_pages

Move the setting/clearing of the vma->pages to a vm operation. Doing so
neatens things up a little, but more importantly gives us a sane place
to also set/clear the vma->pages_sizes, which we introduce later in
preparation for supporting huge-pages.

v2: remove redundant vma->pages check

v3: GEM_BUG_ON(vma->pages) following i915_vma_remove

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-8-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-7-chris@chris-wilson.co.uk

drm/i915: introduce page_size members

In preparation for supporting huge gtt pages for the ppgtt, we introduce
page size members for gem objects.  We fill in the page sizes by
scanning the sg table.

v2: pass the sg_mask to set_pages

v3: calculate the sg_mask inline with populating the sg_table where
possible, and pass to set_pages along with the pages.

v4: bunch of improvements from Joonas

v5: fix num_pages blunder
    introduce i915_sg_page_sizes helper

v6: prefer GEM_BUG_ON(sizes == 0)

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-7-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-6-chris@chris-wilson.co.uk

drm/i915: push set_pages down to the callers

Each backend is now responsible for calling __i915_gem_object_set_pages
upon successfully gathering its backing storage. This eliminates the
inconsistency between the async and sync paths, which stands out even
more when we start throwing around an sg_mask in a later patch.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-6-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-5-chris@chris-wilson.co.uk

drm/i915: introduce page_sizes field to dev_info

In preparation for huge gtt pages expose page_sizes as part of the
device info, to indicate the page sizes supported by the HW.  Currently
only 4K is supported.

v2: s/page_size_mask/page_sizes/

v3: introduce I915_GTT_MAX_PAGE_SIZE

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-5-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-4-chris@chris-wilson.co.uk

drm/i915/gemfs: enable THP

Enable transparent-huge-pages through gemfs by mounting with
huge=within_size.

v2: sprinkle within_size comment

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-4-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-3-chris@chris-wilson.co.uk

drm/i915: introduce simple gemfs

Not a fully blown gemfs, just our very own tmpfs kernel mount. Doing so
moves us away from the shmemfs shm_mnt, and gives us the much needed
flexibility to do things like set our own mount options, namely huge=
which should allow us to enable the use of transparent-huge-pages for
our shmem backed objects.

v2: various improvements suggested by Joonas

v3: move gemfs instance to i915.mm and simplify now that we have
file_setup_with_mnt

v4: fallback to tmpfs shm_mnt upon failure to setup gemfs

v5: make tmpfs fallback kinder

v5: better gemfs failure message
    flags variable

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-3-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-2-chris@chris-wilson.co.uk

mm/shmem: introduce shmem_file_setup_with_mnt

We are planning to use our own tmpfs mnt in i915 in place of the
shm_mnt, such that we can control the mount options, in particular
huge=, which we require to support huge-gtt-pages. So rather than roll
our own version of __shmem_file_setup, it would be preferred if we could
just give shmem our mnt, and let it do the rest.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-2-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-1-chris@chris-wilson.co.uk

drm/i915/execlists: Add a comment for the extra MI_ARB_ENABLE

Michel Thierry noticed that we were applying WaDisableCtxRestoreArbitration
even to gen9, which does not require the w/a. The rationale is that we
need to enable MI arbitration for execlists to work, and to be safe we
do that before every batch (in addition to every context switch into the
batch). Since this is not clear from the single line comment suggesting
the MI_ARB_ENABLE is solely for the w/a, add a little more detail.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005191005.13462-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>

drm/i915: Order two completing nop_submit_request

If two nop's (requests in-flight following a wedged device) complete at
the same time, the global_seqno value written to the HWSP is undefined
as the two threads are not serialized.

v2: Use irqsafe spinlock. We expect the callback may be called from
inside another irq spinlock, so we can't unconditionally restore irqs.

Fixes: ce1135c7de64 ("drm/i915: Complete requests in nop_submit_request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006115617.18432-1-chris@chris-wilson.co.uk

drm/i915: Silence compiler warning for hsw_power_well_enable()

Not all compilers are able to determine that pg is guarded by wait_fuses
and so may think that pg is used uninitialized.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: b2891eb2531e ("drm/i915/hsw+: Add has_fuses power well attribute")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002100416.25865-1-chris@chris-wilson.co.uk
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Try harder to finish the idle-worker

If a worker requeues itself, it may switch to a different kworker pool,
which flush_work() considers as complete. To be strict, we then need to
keep flushing the work until it is no longer pending.

References: https://bugs.freedesktop.org/show_bug.cgi?id=102456
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006104038.22337-1-chris@chris-wilson.co.uk

drm/i915: Fix pointer-to-int conversion

Commit faf654864b25 ("drm/i915: Unify uC variable types to avoid
flooding checkpatch.pl") breaks 32-bit kernel builds. Lets use
cast helper to make compiler happy.

v2: introduce ptr_to_u64 (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006130844.49012-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/huc: Fix includes in intel_huc.c

Fix includes order and make sure we only include required headers.
While here, make intel_huc.h header self-contained.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006090209.67852-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Unify uC variable types to avoid flooding checkpatch.pl

With the code motion mostly done, convert all the uC code away
from uint??_t at once (only a couple dozen variables), so that
reading the checkpatch.pl output should actually pinpoint if
a new uint??_t was accidentally introduced.

v2: - Include intel_uc_fw.h too (Sagar)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006084940.15910-1-joonas.lahtinen@linux.intel.com

drm/i915: Don't use BIT() in UAPI section

Lets not introduce BIT() macro requirement for UAPI for now.

Fixes: 3fd3a6ffe279 ("drm/i915: Simplify i915_reg_read_ioctl")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006104559.17312-1-joonas.lahtinen@linux.intel.com

drm/i915: Use crtc_state_is_legacy_gamma in intel_color_check

crtc_state_is_legacy_gamma also checks for CTM, which was missing from
intel_color_check. By using the same condition for commit and check
we reduce the chance of mismatches.

This was spotted by KASAN while trying to rework kms_color igt test.

[   72.008660] ==================================================================
[   72.009326] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[   72.009519] Read of size 2 at addr ffff880220216e50 by task kms_color/1158
[   72.009900] CPU: 2 PID: 1158 Comm: kms_color Tainted: G     U  W 4.14.0-rc3-patser+ #5281
[   72.009921] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016
[   72.009941] Call Trace:
[   72.009968]  dump_stack+0xc5/0x151
[   72.009996]  ? _atomic_dec_and_lock+0x10f/0x10f
[   72.010024]  ? show_regs_print_info+0x3c/0x3c
[   72.010072]  print_address_description+0x7f/0x240
[   72.010108]  kasan_report+0x216/0x370
[   72.010308]  ? bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[   72.010349]  __asan_load2+0x74/0x80
[   72.010552]  bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[   72.010772]  broadwell_load_luts+0x1f0/0x300 [i915]
[   72.010997]  intel_color_load_luts+0x36/0x40 [i915]
[   72.011205]  intel_begin_crtc_commit+0xa1/0x310 [i915]
[   72.011283]  drm_atomic_helper_commit_planes_on_crtc+0xa6/0x320 [drm_kms_helper]
[   72.011316]  ? wait_for_completion_io+0x460/0x460
[   72.011524]  intel_update_crtc+0xe3/0x100 [i915]
[   72.011720]  skl_update_crtcs+0x360/0x3f0 [i915]
[   72.011945]  ? intel_update_crtcs+0xf0/0xf0 [i915]
[   72.012010]  ? drm_atomic_helper_wait_for_dependencies+0x3d9/0x400 [drm_kms_helper]
[   72.012231]  intel_atomic_commit_tail+0x8db/0x1500 [i915]
[   72.012273]  ? __lock_is_held+0x9c/0xc0
[   72.012494]  ? skl_update_crtcs+0x3f0/0x3f0 [i915]
[   72.012518]  ? find_next_bit+0xb/0x10
[   72.012544]  ? cpumask_next+0x1a/0x20
[   72.012745]  ? i915_sw_fence_complete+0x9d/0xe0 [i915]
[   72.012938]  ? __i915_sw_fence_complete+0x5d0/0x5d0 [i915]
[   72.013176]  intel_atomic_commit+0x528/0x570 [i915]
[   72.013280]  ? drm_atomic_get_property+0xc00/0xc00 [drm]
[   72.013466]  ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[   72.013496]  ? kmem_cache_alloc_trace+0x266/0x280
[   72.013714]  ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[   72.013812]  drm_atomic_commit+0x77/0x80 [drm]
[   72.013911]  set_property_atomic+0x14a/0x210 [drm]
[   72.014015]  ? drm_object_property_get_value+0x70/0x70 [drm]
[   72.014080]  ? mutex_unlock+0xd/0x10
[   72.014292]  ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[   72.014379]  drm_mode_obj_set_property_ioctl+0x1cf/0x310 [drm]
[   72.014481]  ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[   72.014510]  ? lock_release+0x6c0/0x6c0
[   72.014602]  ? drm_is_current_master+0x46/0x60 [drm]
[   72.014706]  drm_ioctl_kernel+0x148/0x1d0 [drm]
[   72.014799]  ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[   72.014898]  ? drm_ioctl_permit+0x100/0x100 [drm]
[   72.014936]  ? kasan_check_write+0x14/0x20
[   72.015039]  drm_ioctl+0x441/0x660 [drm]
[   72.015129]  ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[   72.015235]  ? drm_getstats+0x20/0x20 [drm]
[   72.015287]  ? ___might_sleep+0x159/0x340
[   72.015311]  ? find_held_lock+0xcf/0xf0
[   72.015341]  ? __schedule_bug+0x110/0x110
[   72.015405]  do_vfs_ioctl+0xa88/0xb10
[   72.015449]  ? ioctl_preallocate+0x1a0/0x1a0
[   72.015487]  ? selinux_capable+0x20/0x20
[   72.015525]  ? rcu_dynticks_momentary_idle+0x40/0x40
[   72.015607]  SyS_ioctl+0x4e/0x80
[   72.015647]  entry_SYSCALL_64_fastpath+0x18/0xad
[   72.015670] RIP: 0033:0x7ff74a3d04d7
[   72.015691] RSP: 002b:00007ffc594bec08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   72.015734] RAX: ffffffffffffffda RBX: ffffffff8718f54a RCX: 00007ff74a3d04d7
[   72.015756] RDX: 00007ffc594bec40 RSI: 00000000c01864ba RDI: 0000000000000003
[   72.015777] RBP: ffff880211c0ff98 R08: 0000000000000086 R09: 0000000000000000
[   72.015799] R10: 00007ff74a691b58 R11: 0000000000000246 R12: 0000000000000355
[   72.015821] R13: 00000000ff00eb00 R14: 0000000000000a00 R15: 00007ff746082000
[   72.015857]  ? trace_hardirqs_off_caller+0xfa/0x110

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005141520.23990-1-maarten.lankhorst@linux.intel.com
[mlankhorst: s/crtc_state_is_legacy/&_gamma/ (danvet)]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 82cf435b3134 ("drm/i915: Implement color management on bdw/skl/bxt/kbl")
Cc: <stable@vger.kernel.org> # v4.7+

drm/i915/crt: clean up encoder hook assignment

Only assign the hooks once instead of overwriting for DDI.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/796b631d018fdd5aa2a3608c6a9b9fa196a50f76.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI FDI link training on enable to CRT encoder

Reduce encoder specific checks from CRTC code.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6903136894ffcf47f7511900f3c8d53f760ef6b1.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI and DSI underrun reporting on enable to encoder

Simplify CRTC enable.

v2: Don't forget DSI (Daniel)

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ad8f3ccaed99a5f03e3d53345221a25ad0be50f.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI CRT underrun reporting on disable to encoder

CRT being the only PCH encoder, we can simplify the crtc disable by
pushing the PCH encoder specific parts to CRT encoder.

v2: add hsw_disable_crt (Daniel), rebase

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ecbbb946f7b3782ee3d97f0ec2fe4758c349311.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI CRT underrun reporting on enable to encoder

CRT being the only PCH encoder, we can simplify the crtc enable by
pushing the PCH encoder specific parts to CRT encoder.

v2: add separate hsw_enable_crt (Daniel), rebase

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b117fb524fc571837c83292194fc2ad35e588ec9.1507200657.git.jani.nikula@intel.com

drm/i915/uc: Unify initialization of the uC firmware helper

Unify initialization of the uC firmware helper as we want to
maximize code reuse.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-6-michal.wajdeczko@intel.com

drm/i915/uc: Fix includes order

Fix includes order and make sure we only include required headers.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-5-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC core definitions into dedicated files

Move GuC core definitions into dedicated files as we want to
keep GuC specific code in separated files.

v2: move all functions in single patch (Joonas)
    fix old checkpatch issues (Sagar)

v3: rebased

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> #1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-4-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC submission declarations into dedicated header

Move GuC submission declarations into dedicated header as we want to
keep uC specific code in separate files.

v2: fix include (Chris)
    update commit message (Joonas)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: MichaĹ Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-3-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC log declarations into dedicated header

Move GuC log declarations into dedicated header as we want to
keep component specific code in separate files.

v2: fix includes (Chris)
    update commit message (Joonas)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-2-michal.wajdeczko@intel.com

drm/i915/cnl: Do not add an extra page for precaution in the Gen10 LRC size

BSpec indicates exactly 16752 DWORDs (17 pages), plus one page for PPHWSP. Please
notice that, when looking at the BSpec context image table, the right filter has
to be applied (e.g. "CNL") as some rows are excluded for specific GENs.

BSpec: 1383

v2: Update count and add BSpec tag (Joonas)
v3: Warning about filters in the commit message (Joonas)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 7fd0b1a ("drm/i915/cnl: Add Gen10 LRC size")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507131592-29209-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: avoid potential uninitialized variable use

One of the recent changes introduced a warning about
undefined behavior in the sanity checking:

drivers/gpu/drm/i915/intel_ddi.c: In function 'intel_ddi_hdmi_level':
drivers/gpu/drm/i915/intel_ddi.c:654:6: error: 'n_hdmi_entries' may be used uninitialized in this function [-Werror=maybe-uninitialized]

It seems that the new cnl specific get_buf_trans functions
can return uninitialized data if the voltage level is set
to an unexpected value. This changes the code to always return
'1' in that error case, which seems like the safest choice
as we use one less than the number as an array index later on.

Fixes: cc9cabfdec38 ("drm/i915/cnl: Move voltage check into ddi buf trans functions.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[danvet: shut up gcc comment added.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120835.437022-1-arnd@arndb.de

drm/i915/selftests: fix check for intel IOMMU

An earlier bugfix tried to work around this build failure:

drivers/gpu/drm/i915/selftests/mock_gem_device.c: In function 'mock_gem_device':
drivers/gpu/drm/i915/selftests/mock_gem_device.c:151:20: error: 'struct dev_archdata' has no member named 'iommu'

Checking for CONFIG_IOMMU_API is not sufficient as a compile-time
test since that may be enabled in configurations that have neither
INTEL_IOMMU not AMD_IOMMU enabled. This changes the check to
INTEL_IOMMU instead, as this is the only case we actually care about.

Fixes: f46f156ea770 ("drm/i915/selftests: Only touch archdata.iommu when it exists")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120749.400818-1-arnd@arndb.de

drm/i915/selftests: Remember to create the fake preempt context

For the fake device we have our own set of mock contexts that need to
match the real contexts we normally create. Currently this requires us
to manually instantiate them for the selftests, which I forgot.

Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Fixes: e7af3116836f ("drm/i915: Introduce a preempt context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005105927.22991-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>

drm/i915/edp: Increase the T12 delay quirk to 1300ms

For this specific PCI device, the eDP panel requires a higher panel
power cycle delay of 1300ms where the minimum spec requirement of panel
power cycle delay is 500ms. This fix in combination with correct
timestamp at which we get the panel power off time fixes the dP AUX CH
timeouts seen on various IGT tests.

Fixes: c99a259b4b5192ba ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507073845-13420-2-git-send-email-manasi.d.navare@intel.com

drm/i915/edp: Get the Panel Power Off timestamp after panel is off

Kernel stores the time in jiffies at which the eDP panel is turned
off. This should be obtained after the panel is off (after the
wait_panel_off). When we next attempt to turn the panel on, we use the
difference between the timestamp at which we want to turn the panel on
and timestamp at which panel was turned off to ensure that this is equal
to panel power cycle delay and if not we wait for the remaining
time. Not waiting for the panel power cycle delay can cause the panel to
not turn on giving rise to AUX timeouts for the attempted AUX
transactions.

v2:
* Separate lines for bugzilla (Jani Nikula)
* Suggested by tag (Daniel Vetter)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507135706-17147-1-git-send-email-manasi.d.navare@intel.com

drm/i915/mst: Use MST sideband message transactions for dpms control

Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to
set power states for downstream sinks. Apart from giving us the ability
to set power state for individual sinks, this fixes the below test for
me.

$ xrandr --display :0 --output DP-2-2-8 --off
$ xrandr --display :0 --output DP-2-2-1 --off
$ xrandr --display :0 --output DP-2-2-8 --auto #Black screen
$ xrandr --display :0 --output DP-2-2-1 --auto

v2: Modify and document the dpms and port disable order (Ville)
    Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten)

v3 by Jani: rebase

References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003142211.860-1-jani.nikula@intel.com

drm/i915/scheduler: Support user-defined priorities

Use a priority stored in the context as the initial value when
submitting a request. This allows us to change the default priority on a
per-context basis, allowing different contexts to be favoured with GPU
time at the expense of lower importance work. The user can adjust the
context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive
values being higher priority (they will be serviced earlier, after their
dependencies have been resolved). Any prerequisite work for an execbuf
will have its priority raised to match the new request as required.

Normal users can specify any value in the range of -1023 to 0 [default],
i.e. they can reduce the priority of their workloads (and temporarily
boost it back to normal if so desired).

Privileged users can specify any value in the range of -1023 to 1023,
[default is 0], i.e. they can raise their priority above all overs and
so potentially starve the system.

Note that the existing schedulers are not fair, nor load balancing, the
execution is strictly by priority on a first-come, first-served basis,
and the driver may choose to boost some requests above the range
available to users.

This priority was originally based around nice(2), but evolved to allow
clients to adjust their priority within a small range, and allow for a
privileged high priority range.

For example, this can be used to implement EGL_IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt

EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of
        the context to be created. This attribute is a hint, as an
        implementation may not support multiple contexts at some
        priority levels and system policy may limit access to high
        priority contexts to appropriate system privilege level. The
        default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is
        EGL_CONTEXT_PRIORITY_MEDIUM_IMG."

so we can map

PRIORITY_HIGH -> 1023 [privileged, will failback to 0]
PRIORITY_MED -> 0 [default]
PRIORITY_LOW -> -1023

They also map onto the priorities used by VkQueue (and a VkQueue is
essentially a timeline, our i915_gem_context under full-ppgtt).

v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/
v3: Report min/max user priorities as defines in the uapi, and rebase
internal priorities on the exposed values.

Testcase: igt/gem_exec_schedule
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk

drm/i915/execlists: Preemption!

When we write to ELSP, it triggers a context preemption at the earliest
arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other
operations and the explicit MI_ARB_CHECK). If this is to the same
context, it triggers a LITE_RESTORE where the RING_TAIL is merely
updated (used currently to chain requests from the same context
together, avoiding bubbles). However, if it is to a different context, a
full context-switch is performed and it will start to execute the new
context saving the image of the old for later execution.

Previously we avoided preemption by only submitting a new context when
the old was idle. But now we wish embrace it, and if the new request has
a higher priority than the currently executing request, we write to the
ELSP regardless, thus triggering preemption, but we tell the GPU to
switch to our special preemption context (not the target). In the
context-switch interrupt handler, we know that the previous contexts
have finished execution and so can unwind all the incomplete requests
and compute the new highest priority request to execute.

It would be feasible to avoid the switch-to-idle intermediate by
programming the ELSP with the target context. The difficulty is in
tracking which request that should be whilst maintaining the dependency
change, the error comes in with coalesced requests. As we only track the
most recent request and its priority, we may run into the issue of being
tricked in preempting a high priority request that was followed by a
low priority request from the same context (e.g. for PI); worse still
that earlier request may be our own dependency and the order then broken
by preemption. By injecting the switch-to-idle and then recomputing the
priority queue, we avoid the issue with tracking in-flight coalesced
requests. Having tried the preempt-to-busy approach, and failed to find
a way around the coalesced priority issue, Michal's original proposal to
inject an idle context (based on handling GuC preemption) succeeds.

The current heuristic for deciding when to preempt are only if the new
request is of higher priority, and has the privileged priority of
greater than 0. Note that the scheduler remains unfair!

v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU.
Since, the feature is now conditional and not always available when we
have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a
capability mask).
v3: Stylistic tweaks.
v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of
the preempt vs preempting debate.

Suggested-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-8-chris@chris-wilson.co.uk

drm/i915: Expand I915_PARAM_HAS_SCHEDULER into a capability bitmask

In the next few patches, we wish to enable different features for the
scheduler, some which may subtlety change ABI (e.g. allow requests to be
reordered under different circumstances). So we need to make sure
userspace is cognizant of the changes (if they care), by which we employ
the usual method of a GETPARAM. We already have an
I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder
requests to avoid bubbles), and now we wish to extend that to be a
bitmask to describe the different capabilities implemented.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-7-chris@chris-wilson.co.uk

drm/i915/execlists: Keep request->priority for its lifetime

With preemption, we will want to "unsubmit" a request, taking it back
from the hw and returning it to the priority sorted execution list. In
order to know where to insert it into that list, we need to remember
its adjust priority (which may change even as it was being executed).

This also affects reset for execlists as we are now unsubmitting the
requests following the reset (rather than directly writing the ELSP for
the inflight contexts). This turns reset into an accidental preemption
point, as after the reset we may choose a different pair of contexts to
submit to hw.

GuC is not updated as this series doesn't add preemption to the GuC
submission, and so it can keep benefiting from the early pruning of the
DFS inside execlists_schedule() for a little longer. We also need to
find a way of reducing the cost of that DFS...

v2: Include priority in error-state

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-6-chris@chris-wilson.co.uk

drm/i915/execlists: Move bdw GPGPU w/a to emit_bb

Move the re-enabling of MI arbitration from a per-bb w/a buffer to the
emission of the batch buffer itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-5-chris@chris-wilson.co.uk

drm/i915: Introduce a preempt context

Add another perma-pinned context for using for preemption at any time.
We cannot just reuse the existing kernel context, as first and foremost
we need to ensure that we can preempt the kernel context itself, so
require a distinct context id. Similar to the kernel context, we may
want to interrupt execution and switch to the preempt context at any
time, and so it needs to be permanently pinned and available.

To compensate for yet another permanent allocation, we shrink the
existing context and the new context by reducing their ringbuffer to the
minimum.

v2: Assert that we never allocate a request from the preemption context.
v3: Limit perma-pin to engines that may preempt.
v4: Onion cleanup for early driver death
v5: Onion ordering in main driver cleanup as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-4-chris@chris-wilson.co.uk

drm/i915/execlists: Distinguish the incomplete context notifies

Let the listener know that the context we just scheduled out was not
complete, and will be scheduled back in at a later point.

v2: Handle CONTEXT_STATUS_PREEMPTED in gvt by aliasing it to
CONTEXT_STATUS_OUT for the moment, gvt can expand upon the difference
later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com>
Cc: "Wang, Zhi A" <zhi.a.wang@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-3-chris@chris-wilson.co.uk

drm/i915/preempt: Default to disabled mid-command preemption levels

Supporting fine-granularity preemption levels may require changes in
userspace batch buffer programming. Therefore, we need to fallback to
safe default values, rather that use hardware defaults. Userspace is
still able to enable fine-granularity, since we're whitelisting the
register controlling it in WaEnablePreemptionGranularityControlByUMD.

v2: Extend w/a to cover Cannonlake
v3: Fix commentary to include both fake w/a names.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-2-chris@chris-wilson.co.uk

drm/i915/preempt: Fix WaEnablePreemptionGranularityControlByUMD

The WA applies to all production Gen9 and requires both enabling and
whitelisting of the per-context preemption control register.

v2: Extend to Cannonlake.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-1-chris@chris-wilson.co.uk

drm/i915/guc: Move Guc early init into own function

We don't want to make aggregate uc functions to be too detailed.
This will also make future patch easier.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-7-michal.wajdeczko@intel.com

drm/i915/huc: Move HuC declarations into dedicated header

We want to keep each uC specific code in separate files.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-6-michal.wajdeczko@intel.com

drm/i915/uc: Move uC fw helper code into dedicated files

This is a prerequisite to unblock next steps.

v2: correct include order (Joonas)
v3: use common function prefix (Joonas)
    add kerneldoc (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-5-michal.wajdeczko@intel.com

drm/i915/uc: Create intel_uc_init_mmio

This patch adds new function intel_uc_init_mmio which will initialize
MMIO access related variables prior to uc load/init.

v2: Removed unnecessary export of guc_send_init_regs. Created
intel_uc_init_mmio that currently wraps guc_init_send_regs. (Michal)

v3 (Michal): add kerneldoc (Joonas)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-4-michal.wajdeczko@intel.com

drm/i915/uc: Drop unnecessary forward declaration

We don't need it here.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-3-michal.wajdeczko@intel.com

drm/i915: Make intel_uncore.h header self-contained

We're trying to resolve inter-header dependencies.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-2-michal.wajdeczko@intel.com

drm/i915: Remove defunct trace points

trace_i915_gem_evict_everything and trace_i915_gem_ring_flush stopped
being used when their parent functions were removed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-2-chris@chris-wilson.co.uk

drm/i915: Fix some tracepoints to capture full 64b

The tracepoints need some tlc, in particular we've neglected to update
them for the 64b era.

v2: Prefix hexadecimal output with 0x.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove WA_(SET|CLR)_BIT

These macros are of dubious merit when coupled with the per-context w/a
set. Instead of tweaking the value in the context, they tweak the value
based on the mmio at the time of recording; they are almost by
definition not per-context! Having removed the last users, remove the
macros to avoid temptation in the future.

v2: Kill WA_WRITE as well (now also unused).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Move MMCD_MISC_CTRL from context w/a to standard

Looking at gem_workarounds shows us that MMCD_MISC_CTRL is not restored
following a suspend-resume cycle. This implies that MMCD_MISC_CTRL is
not stored in the context, but is an ordinary register w/a that we need to
restore during init_hw.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Transform whitelisting WAs into a simple reg write

RING_FORCE_TO_NONPRIV registers do not live in the logical context. They are simply
global privileged MMIO registers that happen to be powercontext saved and restored
(meaning only they can survive RC6). Therefore, there is absolutely no need to save
them so that they can be restored everytime we create a new logical context.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506638439-6903-1-git-send-email-oscar.mateo@intel.com
Acked-by: Michel Thierry <michel.thierry@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> #bxt
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Remove use_mmio_flip modparm, v2.

This has been unused since commit afa8ce5b3080
("drm/i915: Nuke legacy flip queueing code").

Changes since v1:
- Rebase on top of all the changes to modparams.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
\o/-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004094416.31306-1-maarten.lankhorst@linux.intel.com

drm/i915/glk: Fix DMC/DC state idleness calculation

According to BSpec GLK like BXT needs to ignore the idle state of cores
before starting the DMC firmware's DC state handler.

Fixes: dbb28b5c3d3c ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com

drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume

The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070
Fixes: cebfcead63de ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com

drm/i915: Skip vblank waits for cursor updates when watermarks dont need updating

In legacy cursor updates we need the extra vblank waits if we update
watermarks, and then we cannot skip the vblank for cursors.

This is why for < gen9 we disabled the cursor fastpath, but we can skip
the wait when post vblank watermarks are untouched.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-2-maarten.lankhorst@linux.intel.com

drm/i915: Unset legacy_cursor_update early in intel_atomic_commit, v3.

Commit b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") removed
the call to wait_for_vblanks and replaced it with flip_done.

Unfortunately legacy_cursor_update was unset too late, and the
replacement call drm_atomic_helper_wait_for_flip_done() was
a noop. Make sure that its unset before setup_commit() is
called to fix this issue.

Changes since v1:
- Force vblank wait for watermarks not yet converted to atomic too. (Ville)
- Use for_each_new_intel_crtc_in_state. (Ville)
Changes since v2:
- Move the optimization to a separate commit. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675
Testcase: kms_cursor_crc
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Marta Löfstedt <marta.lofstedt@intel.com>
Tested-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-1-maarten.lankhorst@linux.intel.com

drm/i915: Organize GLK_COLORS.

Let's organize this in a way that it gets more obvious
when looking to the platform colors and in a easier
way to get inherited.

v2: Add comma at the end (Jani), when possible.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-3-rodrigo.vivi@intel.com

drm/i915: Organize GEN features inheritance.

As Chris noticed the current organization is confusing
and inheritance is not clear.

So, let's split it in GEN<n>_FEATURES <cdn>_PLATFORM
where new GEN inherit features from previous gens and
Platforms only use gen features plus what ever is specific
for that platform and shouldn't be passed on.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-2-rodrigo.vivi@intel.com

drm/i915/skl: Fix has_ipc on skl and document WaDisableIPC.

According to Spec for SKL+: "Isochronous Priority Control.
If enabled, Display sends demoted requests once the transition
watermark is reached. If transition watermark is not enabled,
Display sends demoted requests when the display buffer is full."

The commit 'e57f1c02155f ("drm/i915/gen9+: Add has_ipc flag in
device info structure")' introduced that as gen9+ but missing many
SKL Skus.

I believe the reason for that is Spec also mentions workarounds for
SKL-ALL: "IPC (Isoch Priority Control) may cause underflows
WA: Do not enable IPC in register ARB_CTL2"

It seems lame to add the feature and forever disable it,
but it will avoid a mistake of enabling it when we are reorganizing
the feature definitions on i915_pci.c later.

It will also allow us to probably extend that workaround for
other platforms.

Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-1-rodrigo.vivi@intel.com

drm/i915: Fix DDI PHY init if it was already on

The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.

This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a0137b ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com

drm/i915/glk, cnl: Implement WaDisableScalarClockGating

On GLK and CNL enabling a pipe with its pipe scaler enabled will result
in a FIFO underrun. This happens only once after driver loading or
system/runtime resume, more specifically after power well 1 gets
enabled; subsequent modesets seem to be free of underruns. The BSpec
workaround for this is to disable the pipe scaler clock gating for the
duration of modeset. Based on my tests disabling clock gating must be
done before enabling pipe scaling and we can re-enable it after the pipe
is enabled and one vblank has passed.

For consistency I also checked if plane scaling would cause the same
problem, but that doesn't seem to trigger this problem.

The patch is based on an earlier version from Ander.

v2 (Rodrigo):
- Set also CLKGATE_DIS_PSL bits 8 and 9.
- Add also the BSpec workaround ID.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100302
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002075557.32615-1-imre.deak@intel.com

drm/i915: Add has_psr-flag to gen9lp

While testing Jim Bride's latest batch of PSR patches I noticed
that gen9lp doesn't include the has_psr flag, and that our GLK
system thus reported PSR as unsupported.

This patch simply adds has_psr.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808100952.26448-1-david.weinehall@linux.intel.com

drm/i915/gen8+: Init/reset display interrupts only if i915 IRQs are enabled

Only init / reset the display interrupts during power well enabling /
disabling if the i915 interrupts are enabled. So far we did the
init / reset during driver loading / resuming too, where
initialization / enabling of the i915 interrupts happens only at a later
point. This didn't cause a problem due to GEN8_MASTER_IRQ_CONTROL being
cleared, but triggered gen3_assert_iir_is_zero() in GEN8_IRQ_INIT_NDX().

References: https://bugs.freedesktop.org/show_bug.cgi?id=102988
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928100624.15533-1-imre.deak@intel.com

drm/i915/gen9+: Set same power state before hibernation image save/restore

Atm, on GEN9 big core platforms before saving the hibernation image we
uninitialize the display, disabling power wells manually, while before
restoring the image we keep things powered (letting HW/DMC power down
things as needed). The state mismatch will trigger the following error:

DC state mismatch (0x0 -> 0x2)

While the restore handler knows how to initialize the display from an
unknown state (due to a different loader kernel or not having i915
loaded in the loader kernel) we should still use the same state for
consistency before image saving and restoring. Do this by uniniting the
display before restoring the image too.

Bugzilla: https://bugs.freedesktop.org/attachment.cgi?id=133376
Reported-and-tested-by: Wang Wendy <wendy.wang@intel.com>
Reported-and-tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Wang Wendy <wendy.wang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816144607.9935-1-imre.deak@intel.com

drm/i915/execlists: Cache the last priolist lookup

Avoid the repeated rbtree lookup for each request as we unwind them by
tracking the last priolist.

v2: Fix up my unhelpful suggestion of using default_priolist.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-4-chris@chris-wilson.co.uk

drm/i915: Give the invalid priority a magic name

We use INT_MIN to denote the priority of a request that has not been
submitted to the scheduler; we treat INT_MIN as an invalid priority and
initialise the request to it. Give the value a name so it stands out.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com

drm/i915/execlists: Move request unwinding to a separate function

In the future, we will want to unwind requests following a preemption
point. This requires the same steps as for unwinding upon a reset, so
extract the existing code to a separate function for later use.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-2-chris@chris-wilson.co.uk

drm/i915: Move i915_gem_restore_fences to i915_gem_resume

i915_gem_restore_fences is GEM resumption task hence it is moved to
i915_gem_resume from i915_restore_state.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506661116-12106-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Replace wmb() with i915_gem_chipset_flush()

Currently, we are being fairly lazy and only using a wmb() following an
update to an active batch. Previously, we have found that to be
insufficient to ensure that a write from the CPU reaches memory in a
timely fashion, and in some caches we may need to flush a chipset cache.
To that end, we have i915_gem_chipset_flush() so use it.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926153409.7928-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20170929

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use memset64() to prefill the GTT page

Take advantage of optimised memset64() instead of open coding it to
prefill the GTT pages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926095353.11036-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Also discard second CRC on gen8+ platforms.

One of the differences I spotted for GEN8+ platforms when
compared to older platforms is that spec for BDW+ includes
this sentence:

"The first CRC done indication after CRC is first enabled is
from only a partial frame, so it will not have the expected
CRC result."

This is an indication that on BDW+ platforms, by the time
we receive the interrupt the CRC is not accurate yet for
the full frame. That would be ok, because we are already
skipping the first CRC for all platforms. However the comment
on the code state that it is for some unknown reason. Also,
on CHV (gen8 lp) we were already discarding the second CRC
as well to make sure we have a reliable CRC on hand.

So based on all ou tests and bugs it seems that it is not
on CHV that needs to discard 2 first CRCs, but all BDW+
platforms.

Starting on SKL we have this CRC done bit (24), but the
experiments around the use of this bit wasn't that stable
as just discarding the second CRC. So, let's for now
just move with CHV solution for all gen8+ platforms and
make our CI a bit more stable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102374
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101309
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928002040.7917-1-rodrigo.vivi@intel.com

drm/i915/psr: Set frames before SU entry for psr2

Set frames before SU entry value for max resync frame count of
dpcd register 2009, bit field 0:3.

v2 :
 - add macro  EDP_PSR2_FRAME_BEFORE_SU (Rodrigo)
 - remove EDP_FRAMES_BEFORE_SU_ENTRY (Rodrigo)
 - add check ==1 for dpcd_read call (ville)

v3 : (Rodrigo)
 - move macro EDP_PSR2_FRAME_BEFORE_SU after EDP_PSR2_FRAME_BEFORE_SU
 - replace with &=

v4 :
 - change the macro to shift value (jani)
 - updated register names

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506419953-32605-2-git-send-email-vathsala.nagaraju@intel.com

drm/dp: Add defines for latency in sink

Add defines for dpcd register 2009 (synchronization latency
in sink).

v2:
 - add spec version (Daniel)
 - use register name as is in spec,only drop excess
   from end (jani)
 - add the full register contents (jani)
[Rodrigo fixed spec version when merging]

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506419953-32605-1-git-send-email-vathsala.nagaraju@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm-upstream/drm-next into drm-intel-next-queued

Need MST sideband message transaction to power up/down nodes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Allow optimized platform checks

If we store the platform as a bitmask, and convert the
IS_PLATFORM macro to use it, we allow the compiler to
merge the IS_PLATFORM(a) || IS_PLATFORM(b) || ... checks
into a single conditional.

As a secondary benefit this saves almost 1k of text:

    text           data     bss     dec     hex filename
-1460254          60014    3656 1523924  1740d4 drivers/gpu/drm/i915/i915.ko
+1459260          60026    3656 1522942  173cfe drivers/gpu/drm/i915/i915.ko

v2: Removed the infamous -1.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927164138.15474-1-tvrtko.ursulin@linux.intel.com

Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-next

First feature pull for 4.15.  Highlights:
- Per VM BO support
- Lots of powerplay cleanups
- Powerplay support for CI
- pasid mgr for kfd
- interrupt infrastructure for recoverable page faults
- SR-IOV fixes
- initial GPU reset for vega10
- prime mmap support
- ttm page table debugging improvements
- lots of bug fixes

* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (232 commits)
  drm/amdgpu: clarify license in amdgpu_trace_points.c
  drm/amdgpu: Add gem_prime_mmap support
  drm/amd/powerplay: delete dead code in smumgr
  drm/amd/powerplay: delete SMUM_FIELD_MASK
  drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_READ_FIELD
  drm/amd/powerplay: delete SMUM_SET_FIELD
  drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_WRITE_FIELD
  drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD
  drm/amd/powerplay: move macros to hwmgr.h
  drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h
  drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h
  drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h
  drm/amd/powerplay: add new helper functions in hwmgr.h
  drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair
  drm/amd/powerplay: refine powerplay code.
  drm/amd/powerplay: delete dead code in hwmgr.h
  drm/amd/powerplay: refine interface in struct pp_smumgr_func
  ...

Merge tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Getting started with v4.15 features:

- Cannonlake workarounds (Rodrigo, Oscar)
- Infoframe refactoring and fixes to enable infoframes for DP (Ville)
- VBT definition updates (Jani)
- Sparse warning fixes (Ville, Chris)
- Crtc state usage fixes and cleanups (Ville)
- DP vswing, pre-emph and buffer translation refactoring and fixes (Rodrigo)
- Prevent IPS from interfering with CRC capture (Ville, Marta)
- Enable Mesa to advertise ARB_timer_query (Nanley)
- Refactor GT number into intel_device_info (Lionel)
- Avoid eDP DP AUX CH timeouts harder (Manasi)
- CDCLK check improvements (Ville)
- Restore GPU clock boost on missed pageflip vblanks (Chris)
- Fence register reservation API for vGPU (Changbin)
- First batch of CCS fixes (Ville)
- Finally, numerous GEM fixes, cleanups and improvements (Chris)

* tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel: (100 commits)
  drm/i915: Update DRIVER_DATE to 20170907
  drm/i915/cnl: WaThrottleEUPerfToAvoidTDBackPressure:cnl(pre-prod)
  drm/i915: Lift has-pinned-pages assert to caller of ____i915_gem_object_get_pages
  drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk
  drm/i915/cnl: Allow the reg_read ioctl to read the RCS TIMESTAMP register
  drm/i915: Move device_info.has_snoop into the static tables
  drm/i915: Disable MI_STORE_DATA_IMM for i915g/i915gm
  drm/i915: Re-enable GTT following a device reset
  drm/i915/cnp: Wa 1181: Fix Backlight issue
  drm/i915: Annotate user relocs with __user
  drm/i915: Constify load detect mode
  drm/i915/perf: Remove __user from u64 in drm_i915_perf_oa_config
  drm/i915: Silence sparse by using gfp_t
  drm/i915: io unmap functions want __iomem
  drm/i915: Add __rcu to radix tree slot pointer
  drm/i915: Wake up the device for the fbdev setup
  drm/i915: Add interface to reserve fence registers for vGPU
  drm/i915: Use correct path to trace include
  drm/i915: Fix the missing PPAT cache attributes on CNL
  drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder
  ...

Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...

drm/i915: Avoid using dev_priv->info.gen directly.

Let's stop this usage before it spreads so much.

1. This check is not part of usual searches happening when adding
new platform.
2. There is already a duplication here with INTEL_INFO(dev_priv)->gen
and INTEL_GEN(dev_priv).

So let's please avoid yet another way.

Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926211346.12009-1-rodrigo.vivi@intel.com

i915: Use %pS printk format for direct addresses

Use the %pS printk format for printing symbols from direct addresses.
This is important for the ia64, ppc64 and parisc64 architectures, while on
other architectures there is no difference between %pS and %pF.
Fix it for consistency across the kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1504729681-3504-6-git-send-email-deller@gmx.de

drm/i915/execlists: Notify context-out for lost requests

When cancelling requests, also send the notification to any listeners
(gvt) that the request is no longer scheduled on hw. They may require to
keep the in/out exactly balanced, and so the reuse after the reset may
confuse the listener.

Fixes: 221ab9719bf3 ("drm/i915/execlists: Unwind incomplete requests on resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com>
Cc: "Wang, Zhi A" <zhi.a.wang@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926101720.9479-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915/cnl: Add support slice/subslice/eu configs

Cannonlake Slice and Subslice information has changed.

This patch initially provided by Ben adds the proper sseu
initialization.

v2: This v2 done by Rodrigo includes:
    - Fix on Total slices count by avoiding [1][2] and [2][2].
    - Inclusion of EU Per Subslice.
    - Commit message.
v3: This v3 done by Rodrigo includes:
    - Handle all possible bits and extra fuse register.
    - Use INTEL_GEN macro.
    - Fully assume uniform distribution so remove union
      with eu_per_subslice and add proper the comment.
v4: This v4 done by Rodrigo includes:
    - Consider all bits available: 6 bits for slices [27:22]
      and 4 for subslices [21:18].
v5: This v5 done by Rodrigo includes:
    - sseu->subslice_mask = (1 << 4) - 1 - missed on previous
    versions and noticed by Oscar.

Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920183525.20530-1-rodrigo.vivi@intel.com

drm/amdgpu: clarify license in amdgpu_trace_points.c

It was not clear.  The rest of the driver is MIT/X11.

Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gem_prime_mmap support

v2: drop hdp invalidate/flush.
v3: honor pgoff during prime mmap. Add a barrier after cpu access.
v4: drop begin/end_cpu_access() for now, revisit later.

Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>