nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context

[ Upstream commit 19fce0470f05031e6af36e49ce222d0f0050d432 ]

Recent patches changed calling sequences. nvme_fc_abort_outstanding_ios
used to be called from a timeout or work context. Now it is being called
in an io completion context, which can be an interrupt handler.
Unfortunately, the abort outstanding ios routine attempts to stop nvme
queues and nested routines that may try to sleep, which is in conflict
with the interrupt handler.

Correct replacing the direct call with a work element scheduling, and the
abort outstanding ios routine will be called in the work element.

Fixes: 95ced8a2c72d ("nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery")
Signed-off-by: James Smart <james.smart@broadcom.com>
Reported-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: select CONFIG_CRC32

[ Upstream commit 152a8a6c017bfdeda7f6d052fbc6e151891bd9b6 ]

Without crc32 support, this fails to link:

arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz':
scan.c:(.text+0x928): undefined reference to `crc32_le'

Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling

[ Upstream commit a8f7e08a81708920a928664a865208fdf451c49f ]

The IN and OUT instructions with port address as an immediate operand
only use an 8-bit immediate (imm8). The current VC handler uses the
entire 32-bit immediate value but these instructions only set the first
bytes.

Cast the operand to an u8 for that.

 [ bp: Massage commit message. ]

Fixes: 25189d08e5168 ("x86/sev-es: Add support for handling IOIO exceptions")
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20210105163311.221490-1-pgonda@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Save correct stopping point in file seq iteration

[ Upstream commit 69ca310f34168eae0ada434796bfc22fb4a0fa26 ]

On some systems, some variant of the following splat is
repeatedly seen.  The common factor in all traces seems
to be the entry point to task_file_seq_next().  With the
patch, all warnings go away.

    rcu: INFO: rcu_sched self-detected stall on CPU
    rcu: \x0926-....: (20992 ticks this GP) idle=d7e/1/0x4000000000000002 softirq=81556231/81556231 fqs=4876
    \x09(t=21033 jiffies g=159148529 q=223125)
    NMI backtrace for cpu 26
    CPU: 26 PID: 2015853 Comm: bpftool Kdump: loaded Not tainted 5.6.13-0_fbk4_3876_gd8d1f9bf80bb #1
    Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A12 10/08/2018
    Call Trace:
     <IRQ>
     dump_stack+0x50/0x70
     nmi_cpu_backtrace.cold.6+0x13/0x50
     ? lapic_can_unplug_cpu.cold.30+0x40/0x40
     nmi_trigger_cpumask_backtrace+0xba/0xca
     rcu_dump_cpu_stacks+0x99/0xc7
     rcu_sched_clock_irq.cold.90+0x1b4/0x3aa
     ? tick_sched_do_timer+0x60/0x60
     update_process_times+0x24/0x50
     tick_sched_timer+0x37/0x70
     __hrtimer_run_queues+0xfe/0x270
     hrtimer_interrupt+0xf4/0x210
     smp_apic_timer_interrupt+0x5e/0x120
     apic_timer_interrupt+0xf/0x20
     </IRQ>
    RIP: 0010:get_pid_task+0x38/0x80
    Code: 89 f6 48 8d 44 f7 08 48 8b 00 48 85 c0 74 2b 48 83 c6 55 48 c1 e6 04 48 29 f0 74 19 48 8d 78 20 ba 01 00 00 00 f0 0f c1 50 20 <85> d2 74 27 78 11 83 c2 01 78 0c 48 83 c4 08 c3 31 c0 48 83 c4 08
    RSP: 0018:ffffc9000d293dc8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13
    RAX: ffff888637c05600 RBX: ffffc9000d293e0c RCX: 0000000000000000
    RDX: 0000000000000001 RSI: 0000000000000550 RDI: ffff888637c05620
    RBP: ffffffff8284eb80 R08: ffff88831341d300 R09: ffff88822ffd8248
    R10: ffff88822ffd82d0 R11: 00000000003a93c0 R12: 0000000000000001
    R13: 00000000ffffffff R14: ffff88831341d300 R15: 0000000000000000
     ? find_ge_pid+0x1b/0x20
     task_seq_get_next+0x52/0xc0
     task_file_seq_get_next+0x159/0x220
     task_file_seq_next+0x4f/0xa0
     bpf_seq_read+0x159/0x390
     vfs_read+0x8a/0x140
     ksys_read+0x59/0xd0
     do_syscall_64+0x42/0x110
     entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f95ae73e76e
    Code: Bad RIP value.
    RSP: 002b:00007ffc02c1dbf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
    RAX: ffffffffffffffda RBX: 000000000170faa0 RCX: 00007f95ae73e76e
    RDX: 0000000000001000 RSI: 00007ffc02c1dc30 RDI: 0000000000000007
    RBP: 00007ffc02c1ec70 R08: 0000000000000005 R09: 0000000000000006
    R10: fffffffffffff20b R11: 0000000000000246 R12: 00000000019112a0
    R13: 0000000000000000 R14: 0000000000000007 R15: 00000000004283c0

If unable to obtain the file structure for the current task,
proceed to the next task number after the one returned from
task_seq_get_next(), instead of the next task number from the
original iterator.

Also, save the stopping task number from task_seq_get_next()
on failure in case of restarts.

Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201218185032.2464558-2-jonathan.lemon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Simplify task_file_seq_get_next()

[ Upstream commit 91b2db27d3ff9ad29e8b3108dfbf1e2f49fe9bd3 ]

Simplify task_file_seq_get_next() by removing two in/out arguments: task
and fstruct. Use info->task and info->files instead.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201120002833.2481110-1-songliubraving@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu-tasks: Move RCU-tasks initialization to before early_initcall()

[ Upstream commit 1b04fa9900263b4e217ca2509fd778b32c2b4eb2 ]

PowerPC testing encountered boot failures due to RCU Tasks not being
fully initialized until core_initcall() time.  This commit therefore
initializes RCU Tasks (along with Rude RCU and RCU Tasks Trace) just
before early_initcall() time, thus allowing waiting on RCU Tasks grace
periods from early_initcall() handlers.

Link: https://lore.kernel.org/rcu/87eekfh80a.fsf@dja-thinkpad.axtens.net/
Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall")
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

poll: fix performance regression due to out-of-line __put_user()

[ Upstream commit ef0ba05538299f1391cbe097de36895bb36ecfe6 ]

The kernel test robot reported a -5.8% performance regression on the
"poll2" test of will-it-scale, and bisected it to commit d55564cfc222
("x86: Make __put_user() generate an out-of-line call").

I didn't expect an out-of-line __put_user() to matter, because no normal
core code should use that non-checking legacy version of user access any
more.  But I had overlooked the very odd poll() usage, which does a
__put_user() to update the 'revents' values of the poll array.

Now, Al Viro correctly points out that instead of updating just the
'revents' field, it would be much simpler to just copy the _whole_
pollfd entry, and then we could just use "copy_to_user()" on the whole
array of entries, the same way we use "copy_from_user()" a few lines
earlier to get the original values.

But that is not what we've traditionally done, and I worry that threaded
applications might be concurrently modifying the other fields of the
pollfd array.  So while Al's suggestion is simpler - and perhaps worth
trying in the future - this instead keeps the "just update revents"
model.

To fix the performance regression, use the modern "unsafe_put_user()"
instead of __put_user(), with the proper "user_write_access_begin()"
guarding in place. This improves code generation enormously.

Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Laight <David.Laight@aculab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: picoxcell: fix missing interrupt-parent properties

[ Upstream commit bac717171971176b78c72d15a8b6961764ab197f ]

dtc points out that the interrupts for some devices are not parsable:

picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent
picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent

There are two VIC instances, so it's not clear which one needs to be
used. I found the BSP sources that reference VIC0, so use that:

https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch

Acked-by: Jamie Iles <jamie@jamieiles.com>
Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Call msm_init_vram before binding the gpu

[ Upstream commit d863f0c7b536288e2bd40cbc01c10465dd226b11 ]

vram.size is needed when binding a gpu without an iommu and is defined
in msm_init_vram(), so run that before binding it.

Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI

[ Upstream commit ee61cfd955a64a58ed35cbcfc54068fcbd486945 ]

It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so
that caller doesn't have to deal with !CONFIG_ACPI build issue.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix lockdep splat in sva bind()/unbind()

[ Upstream commit 420d42f6f9db27d88bc4f83e3e668fcdacbf7e29 ]

Lock(&iommu->lock) without disabling irq causes lockdep warnings.

========================================================
WARNING: possible irq lock inversion dependency detected
5.11.0-rc1+ #828 Not tainted
--------------------------------------------------------
kworker/0:1H/120 just changed the state of lock:
ffffffffad9ea1b8 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.0+0x32/0x120
but this lock took another, SOFTIRQ-unsafe lock in the past:
 (&iommu->lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&iommu->lock);
                               local_irq_disable();
                               lock(device_domain_lock);
                               lock(&iommu->lock);
  <Interrupt>
    lock(device_domain_lock);

 *** DEADLOCK ***

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201231005323.2178523-5-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: Fix copy paste error for NVIDIA alt-mode description

[ Upstream commit 41952a66015466c3208aac96b14ffd92e0943589 ]

The name of the module for the NVIDIA alt-mode is incorrect as it
looks to be a copy-paste error from the entry above, update it to
the correct typec_nvidia module name.

Cc: Ajay Gupta <ajayg@nvidia.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210106001605.167917-1-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix potential memory leak during navi12 deinitialization

[ Upstream commit e6d5c64efaa34aae3815a9afeb1314a976142e83 ]

Navi12 HDCP & DTM deinitialization needs continue to free bo if already
created though initialized flag is not set.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix the failure when change power profile for renoir

[ Upstream commit 44cb39e19a05ca711bcb6e776e0a4399223204a0 ]

This patch is to fix the failure when change power profile to
"profile_peak" for renoir.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix a GPU hang issue when remove device

[ Upstream commit 88e21af1b3f887d217f2fb14fc7e7d3cd87ebf57 ]

When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.

Dmesg log is as following:
amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
amdgpu: cp queue pipe 4 queue 0 preemption failed
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue

[ Upstream commit a7b5d9dd57298333e6e9f4c167f01385d922bbfb ]

fix NULL pointer issue when read sysfs amdgpu_current_backlight_pwm sysfs node.

Call Trace:
[  248.273833] BUG: kernel NULL pointer dereference, address: 0000000000000130
[  248.273930] #PF: supervisor read access in kernel mode
[  248.273993] #PF: error_code(0x0000) - not-present page
[  248.274054] PGD 0 P4D 0
[  248.274092] Oops: 0000 [#1] SMP PTI
[  248.274138] CPU: 2 PID: 1377 Comm: cat Tainted: G           OE     5.9.0-rc5-drm-next-5.9+ #1
[  248.274233] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 3802 03/15/2018
[  248.274641] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu]
[  248.274718] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e
0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01
[  248.274919] RSP: 0018:ffffb5ad809b3df0 EFLAGS: 00010203
[  248.274982] RAX: ffffa0f77d1c0010 RBX: ffffa0f793ae9168 RCX: 0000000000000001
[  248.275064] RDX: ffffa0f79753db00 RSI: 0000000000000001 RDI: 0000000000000000
[  248.275145] RBP: ffffb5ad809b3e00 R08: ffffb5ad809b3da0 R09: 0000000000000000
[  248.275225] R10: ffffb5ad809b3e68 R11: 0000000000000000 R12: ffffa0f793ae9190
[  248.275306] R13: ffffb5ad809b3ef0 R14: 0000000000000001 R15: ffffa0f793ae9168
[  248.275388] FS:  00007f5f1ec4d540(0000) GS:ffffa0f79ec80000(0000) knlGS:0000000000000000
[  248.275480] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  248.275547] CR2: 0000000000000130 CR3: 000000042a03c005 CR4: 00000000003706e0
[  248.275628] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  248.275708] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  248.275789] Call Trace:
[  248.276124]  ? current_backlight_read+0x24/0x40 [amdgpu]
[  248.276194]  seq_read+0xc3/0x3f0
[  248.276240]  full_proxy_read+0x5c/0x90
[  248.276290]  vfs_read+0xa7/0x190
[  248.276334]  ksys_read+0xa7/0xe0
[  248.276379]  __x64_sys_read+0x1a/0x20
[  248.276429]  do_syscall_64+0x37/0x80
[  248.276477]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  248.276538] RIP: 0033:0x7f5f1e75c191
[  248.276585] Code: fe ff ff 48 8d 3d b7 9d 0a 00 48 83 ec 08 e8 46 4d 02 00 66 0f 1f 44 00 00 48 8d 05 71 07
2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53Hw
[  248.276784] RSP: 002b:00007ffcb1fc3f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  248.276872] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5f1e75c191
[  248.276953] RDX: 0000000000020000 RSI: 00007f5f1ec2b000 RDI: 0000000000000003
[  248.277034] RBP: 0000000000020000 R08: 00000000ffffffff R09: 0000000000000000
[  248.277115] R10: 0000000000000022 R11: 0000000000000246 R12: 00007f5f1ec2b000
[  248.277195] R13: 0000000000000003 R14: 00007f5f1ec2b00f R15: 0000000000020000
[  248.277279] Modules linked in: amdgpu(OE) iommu_v2 gpu_sched ttm(OE) drm_kms_helper cec drm
i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs
lockd grace fscache nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic
ledtrig_audio intel_rapl_msr intel_rapl_common snd_hda_intel snd_intel_dspcfg x86_pkg_temp_thermal
intel_powerclamp snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event mei_hdcp
coretemp snd_rawmidi snd_seq kvm_intel kvm snd_seq_device snd_timer irqbypass joydev snd input_leds soundcore
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper rapl intel_cstate
mac_hid mei_me serio_raw mei eeepc_wmi wmi_bmof asus_wmi mxm_wmi intel_wmi_thunderbolt acpi_pad sparse_keymap
efi_pstore sch_fq_codel parport_pc ppdev lp parport sunrpc ip_tables x_tables autofs4 hid_logitech_hidpp
hid_logitech_dj hid_generic usbhid hid e1000e psmouse ahci libahci wmi video
[  248.278211] CR2: 0000000000000130
[  248.278221] ---[ end trace 1fbe72fe6f91091d ]---
[  248.357226] RIP: 0010:dc_link_get_backlight_level+0x5/0x70 [amdgpu]
[  248.357272] Code: 67 ff ff ff 41 b9 03 00 00 00 e9 45 ff ff ff d1 ea e9 55 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b 87 30 01 00 00 48 8b 00 48 8b 88 88 03 00 00 48 8d 81 e8 01

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-rdma: Fix list_del corruption on queue establishment failure

[ Upstream commit 9ceb7863537748c67fa43ac4f2f565819bbd36e4 ]

When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some
requests at rsp_wait_list. In case a disconnect occurs at this
state, no one will empty this list and will return the requests to
free_rsps list. Normally nvmet_rdma_queue_established() free those
requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in
this case __nvmet_rdma_queue_disconnect() is called before. The
crash happens at nvmet_rdma_free_rsps() when calling
list_del(&rsp->free_list), because the request exists only at
the wait list. To fix the issue, simply clear rsp_wait_list when
destroying the queue.

Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: avoid possible double fetch in handling CQE

[ Upstream commit 62df80165d7f197c9c0652e7416164f294a96661 ]

While handling the completion queue, keep a local copy of the command id
from the DMA-accessible completion entry. This silences a time-of-check
to time-of-use (TOCTOU) warning from KF/x[1], with respect to a
Thunderclap[2] vulnerability analysis. The double-read impact appears
benign.

There may be a theoretical window for @command_id to be used as an
adversary-controlled array-index-value for mounting a speculative
execution attack, but that mitigation is saved for a potential follow-on.
A man-in-the-middle attack on the data payload is out of scope for this
analysis and is hopefully mitigated by filesystem integrity mechanisms.

[1] https://github.com/intel/kernel-fuzzer-for-xen-project
[2] http://thunderclap.io/thunderclap-paper-ndss2019.pdf
Signed-off-by: Lalithambika Krishna Kumar <lalithambika.krishnakumar@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN

[ Upstream commit 7ee5c78ca3895d44e918c38332921983ed678be0 ]

A system with more than one of these SSDs will only have one usable.
Hence the kernel fails to detect nvme devices due to duplicate cntlids.

[    6.274554] nvme nvme1: Duplicate cntlid 33 with nvme0, rejecting
[    6.274566] nvme nvme1: Removing after probe failure status: -22

Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue.

Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: fix the return value for UDP GRO test

[ Upstream commit 3503ee6c0bec5f173d606359e6384a5ef85492fb ]

The udpgro.sh will always return 0 (unless the bpf selftest was not
build first) even if there are some failed sub test-cases.

Therefore the kselftest framework will report this case is OK.

Check and return the exit status of each test to make it easier to
spot real failures.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: fs_enet: Add missing MODULE_LICENSE

[ Upstream commit 445c6198fe7be03b7d38e66fe8d4b3187bc251d4 ]

Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE()
into error") the ppc32_allmodconfig build fails with:

  ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o
  ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o

Add the missing MODULE_LICENSEs to fix the build. Both files include a
copyright header indicating they are GPL v2.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misdn: dsp: select CONFIG_BITREVERSE

[ Upstream commit 51049bd903a81307f751babe15a1df8d197884e8 ]

Without this, we run into a link error

arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables':
(.text+0x30c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC

[ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ]

fs/dax.c uses copy_user_page() but ARC does not provide that interface,
resulting in a build error.

Provide copy_user_page() in <asm/page.h>.

../fs/dax.c: In function 'copy_cow_page_dax':
../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Dan Williams <dan.j.williams@intel.com>
#Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
#Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bfq: Fix computation of shallow depth

[ Upstream commit 6d4d273588378c65915acaf7b2ee74e9dd9c130a ]

BFQ computes number of tags it allows to be allocated for each request type
based on tag bitmap. However it uses 1 << bitmap.shift as number of
available tags which is wrong. 'shift' is just an internal bitmap value
containing logarithm of how many bits bitmap uses in each bitmap word.
Thus number of tags allowed for some request types can be far to low.
Use proper bitmap.depth which has the number of tags instead.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: drop file refs after task cancel

[ Upstream commit de7f1d9e99d8b99e4e494ad8fcd91f0c4c5c9357 ]

io_uring fds marked O_CLOEXEC and we explicitly cancel all requests
before going through exec, so we don't want to leave task's file
references to not our anymore io_uring instances.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fix the divide by 0 error when calculating xfer waiting time

[ Upstream commit 6170d077bf92c5b3dfbe1021688d3c0404f7c9e9 ]

The xfer waiting time is the result of xfer->len / xfer->speed_hz. This
patch makes the assumption of 100khz xfer speed if the xfer->speed_hz is
not assigned and stays 0. This avoids the divide by 0 issue and ensures
a reasonable tolerant waiting time.

Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1609723749-3557-1-git-send-email-yilun.xu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: remove 'kvmconfig' and 'xenconfig' shorthands

[ Upstream commit 9bba03d4473df0b707224d4d2067b62d1e1e2a77 ]

Linux 5.10 is out. Remove the 'kvmconfig' and 'xenconfig' shorthands
as previously announced.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/raid6: Let $(UNROLL) rules work with macOS userland

[ Upstream commit 0c36d88cff4d72149f94809303c5180b6f716d39 ]

Older versions of BSD awk are fussy about the order of '-v' and '-f'
flags, and require a space after the flag name. This causes build
failures on platforms with an old awk, such as macOS and NetBSD.

Since GNU awk and modern versions of BSD awk (distributed with
FreeBSD/OpenBSD) are fine with either form, the definition of
'cmd_unroll' can be trivially tweaked to let the lib/raid6 Makefile
work with both old and new awk flag dialects.

Signed-off-by: John Millikin <john@john-millikin.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values

[ Upstream commit 1eda52334e6d13eb1a85f713ce06dd39342b5020 ]

With MAX_PWM being defined to 255 the code

unsigned long period;
...
period = ctx->pwm->args.period;
state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);

calculates a too small value for duty_cycle if the configured period is
big (either by discarding the 64 bit value ctx->pwm->args.period or by
overflowing the multiplication). As this results in a too slow fan and
so maybe an overheating machine better be safe than sorry and error out
in .probe.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20201215092031.152243-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: Fix memleak in hl_device_reset

[ Upstream commit b000700d6db50c933ce8b661154e26cf4ad06dba ]

When kzalloc() fails, we should execute hl_mmu_fini()
to release the MMU module. It's the same when
hl_ctx_init() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: altera: fix return value for altera_spi_txrx()

[ Upstream commit ede090f5a438e97d0586f64067bbb956e30a2a31 ]

This patch fixes the return value for altera_spi_txrx. It should return
1 for interrupt transfer mode, and return 0 for polling transfer mode.

The altera_spi_txrx() implements the spi_controller.transfer_one
callback. According to the spi-summary.rst, the transfer_one should
return 0 when transfer is finished, return 1 when transfer is still in
progress.

Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1609219662-27057-2-git-send-email-yilun.xu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: spmi: hisi-spmi-controller: Fix some error handling paths

[ Upstream commit 12b38ea040b3bb2a30eb9cd488376df5be7ea81f ]

IN the probe function, if an error occurs after calling
'spmi_controller_alloc()', it must be undone by a corresponding
'spmi_controller_put() call.

In the remove function, use 'spmi_controller_put(ctrl)' instead of
'kfree(ctrl)'.

While a it fix an error message
(s/spmi_add_controller/spmi_controller_add/)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201213151105.137731-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: register to pci shutdown callback

[ Upstream commit fcaebc7354188b0d708c79df4390fbabd4d9799d ]

We need to make sure our device is idle when rebooting a virtual
machine. This is done in the driver level.

The firmware will later handle FLR but we want to be extra safe and
stop the devices until the FLR is handled.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs/gaudi: retry loading TPC f/w on -EINTR

[ Upstream commit 98e8781f008372057bd5cb059ca6b507371e473d ]

If loading the firmware file for the TPC f/w was interrupted, try
to do it again, up to 5 times.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: adjust pci controller init to new firmware

[ Upstream commit 377182a3cc5ae6cc17fb04d06864c975f9f71c18 ]

When the firmware security is enabled, the pcie_aux_dbi_reg_addr
register in the PCI controller is blocked. Therefore, ignore
the result of writing to this register and assume it worked. Also
remove the prints on errors in the internal ELBI write function.

If the security is enabled, the firmware is responsible for setting
this register correctly so we won't have any problem.

If the security is disabled, the write will work (unless something
is totally broken at the PCI level and then the whole sequence
will fail).

In addition, remove a write to register pcie_aux_dbi_reg_addr+4,
which was never actually needed.

Moreover, PCIE_DBI registers are blocked to access from host when
firmware security is enabled. Use a different register to flush the
writes.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ux500/golden: Set display max brightness

[ Upstream commit 7887cc89d5851cbdec49219e9614beec776af150 ]

A too high brightness by default (default is max) makes the
screen go blank. Set this to 15 as in the Vendor tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20201214223413.253893-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram

[ Upstream commit 887078de2a23689e29d6fa1b75d7cbc544c280be ]

Table 8-53 in the QUICC Engine Reference manual shows definitions of
fields up to a size of 192 bytes, not just 128. But in table 8-111,
one does find the text

  Base Address of the Global Transmitter Parameter RAM Page. [...]
  The user needs to allocate 128 bytes for this page. The address must
  be aligned to the page size.

I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual;
they both have this inconsistency (and the table numbers are the
same).

Adding a bit of debug printing, on my board the struct
ucc_geth_tx_global_pram is allocated at offset 0x880, while
the (opaque) ucc_geth_thread_data_tx gets allocated immediately
afterwards, at 0x900. So whatever the engine writes into the thread
data overlaps with the tail of the global tx pram (and devmem says
that something does get written during a simple ping).

I haven't observed any failure that could be attributed to this, but
it seems to be the kind of thing that would be extremely hard to
debug. So extend the struct definition so that we do allocate 192
bytes.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: bd718x7: Add enable times

[ Upstream commit 3b66e4a8e58a85af3212c7117d7a29c9ef6679a2 ]

Use the typical startup times from the data sheet so boards get a
reasonable default. Not setting any enable time can lead to board hangs
when e.g. clocks are enabled too soon afterwards.

This fixes gpu power domain resume on the Librem 5.

[Moved #defines into driver, seems to be general agreement and avoids any
cross tree issues -- broonie]

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/41fb2ed19f584f138336344e2297ae7301f72b75.1608316658.git.agx@sigxcpu.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan

[ Upstream commit cb13eea3b49055bd78e6ddf39defd6340f7379fc ]

If we remount a filesystem in RO mode while the qgroup rescan worker is
running, we can end up having it still running after the remount is done,
and at unmount time we may end up with an open transaction that ends up
never getting committed. If that happens we end up with several memory
leaks and can crash when hardware acceleration is unavailable for crc32c.
Possibly it can lead to other nasty surprises too, due to use-after-free
issues.

The following steps explain how the problem happens.

1) We have a filesystem mounted in RW mode and the qgroup rescan worker is
   running;

2) We remount the filesystem in RO mode, and never stop/pause the rescan
   worker, so after the remount the rescan worker is still running. The
   important detail here is that the rescan task is still running after
   the remount operation committed any ongoing transaction through its
   call to btrfs_commit_super();

3) The rescan is still running, and after the remount completed, the
   rescan worker started a transaction, after it finished iterating all
   leaves of the extent tree, to update the qgroup status item in the
   quotas tree. It does not commit the transaction, it only releases its
   handle on the transaction;

4) A filesystem unmount operation starts shortly after;

5) The unmount task, at close_ctree(), stops the transaction kthread,
   which had not had a chance to commit the open transaction since it was
   sleeping and the commit interval (default of 30 seconds) has not yet
   elapsed since the last time it committed a transaction;

6) So after stopping the transaction kthread we still have the transaction
   used to update the qgroup status item open. At close_ctree(), when the
   filesystem is in RO mode and no transaction abort happened (or the
   filesystem is in error mode), we do not expect to have any transaction
   open, so we do not call btrfs_commit_super();

7) We then proceed to destroy the work queues, free the roots and block
   groups, etc. After that we drop the last reference on the btree inode
   by calling iput() on it. Since there are dirty pages for the btree
   inode, corresponding to the COWed extent buffer for the quotas btree,
   btree_write_cache_pages() is invoked to flush those dirty pages. This
   results in creating a bio and submitting it, which makes us end up at
   btrfs_submit_metadata_bio();

8) At btrfs_submit_metadata_bio() we end up at the if-then-else branch
   that calls btrfs_wq_submit_bio(), because check_async_write() returned
   a value of 1. This value of 1 is because we did not have hardware
   acceleration available for crc32c, so BTRFS_FS_CSUM_IMPL_FAST was not
   set in fs_info->flags;

9) Then at btrfs_wq_submit_bio() we call btrfs_queue_work() against the
   workqueue at fs_info->workers, which was already freed before by the
   call to btrfs_stop_all_workers() at close_ctree(). This results in an
   invalid memory access due to a use-after-free, leading to a crash.

When this happens, before the crash there are several warnings triggered,
since we have reserved metadata space in a block group, the delayed refs
reservation, etc:

  ------------[ cut here ]------------
  WARNING: CPU: 4 PID: 1729896 at fs/btrfs/block-group.c:125 btrfs_put_block_group+0x63/0xa0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 4 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_put_block_group+0x63/0xa0 [btrfs]
  Code: f0 01 00 00 48 39 c2 75 (...)
  RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206
  RAX: 0000000000000001 RBX: ffff947ed73e4000 RCX: ffff947ebc8b29c8
  RDX: 0000000000000001 RSI: ffffffffc0b150a0 RDI: ffff947ebc8b2800
  RBP: ffff947ebc8b2800 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110
  R13: ffff947ed73e4160 R14: ffff947ebc8b2988 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481ad600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f37e2893320 CR3: 0000000138f68001 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_free_block_groups+0x17f/0x2f0 [btrfs]
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 01 48 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c6 ]---
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-rsv.c:459 btrfs_release_global_block_rsv+0x70/0xc0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 2 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_release_global_block_rsv+0x70/0xc0 [btrfs]
  Code: 48 83 bb b0 03 00 00 00 (...)
  RSP: 0018:ffffb270826bbdd8 EFLAGS: 00010206
  RAX: 000000000033c000 RBX: ffff947ed73e4000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffffffffc0b0d8c1 RDI: 00000000ffffffff
  RBP: ffff947ebc8b7000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ed73e4110
  R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481aca00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000561a79f76e20 CR3: 0000000138f68006 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_free_block_groups+0x24c/0x2f0 [btrfs]
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 01 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c7 ]---
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 1729896 at fs/btrfs/block-group.c:3377 btrfs_free_block_groups+0x25d/0x2f0 [btrfs]
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  CPU: 5 PID: 1729896 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_free_block_groups+0x25d/0x2f0 [btrfs]
  Code: ad de 49 be 22 01 00 (...)
  RSP: 0018:ffffb270826bbde8 EFLAGS: 00010206
  RAX: ffff947ebeae1d08 RBX: ffff947ed73e4000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff947e9d823ae8 RDI: 0000000000000246
  RBP: ffff947ebeae1d08 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff947ebeae1c00
  R13: ffff947ed73e5278 R14: dead000000000122 R15: dead000000000100
  FS:  00007f15edfea840(0000) GS:ffff9481ad200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f1475d98ea8 CR3: 0000000138f68005 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   close_ctree+0x2ba/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15ee221ee7
  Code: ff 0b 00 f7 d8 64 89 (...)
  RSP: 002b:00007ffe9470f0f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f15ee347264 RCX: 00007f15ee221ee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 000056169701d000
  RBP: 0000561697018a30 R08: 0000000000000000 R09: 00007f15ee2e2be0
  R10: 000056169701efe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 000056169701d000 R14: 0000561697018b40 R15: 0000561697018c60
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last  enabled at (0): [<ffffffff8bcae560>] copy_process+0x8a0/0x1d70
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace dd74718fef1ed5c8 ]---
  BTRFS info (device sdc): space_info 4 has 268238848 free, is not full
  BTRFS info (device sdc): space_info total=268435456, used=114688, pinned=0, reserved=16384, may_use=0, readonly=65536
  BTRFS info (device sdc): global_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): trans_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): chunk_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): delayed_block_rsv: size 0 reserved 0
  BTRFS info (device sdc): delayed_refs_rsv: size 524288 reserved 0

And the crash, which only happens when we do not have crc32c hardware
acceleration, produces the following trace immediately after those
warnings:

  stack segment: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
  CPU: 2 PID: 1749129 Comm: umount Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_queue_work+0x36/0x190 [btrfs]
  Code: 54 55 53 48 89 f3 (...)
  RSP: 0018:ffffb27082443ae8 EFLAGS: 00010282
  RAX: 0000000000000004 RBX: ffff94810ee9ad90 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffff94810ee9ad90 RDI: ffff947ed8ee75a0
  RBP: a56b6b6b6b6b6b6b R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000007 R11: 0000000000000001 R12: ffff947fa9b435a8
  R13: ffff94810ee9ad90 R14: 0000000000000000 R15: ffff947e93dc0000
  FS:  00007f3cfe974840(0000) GS:ffff9481ac600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f1b42995a70 CR3: 0000000127638003 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   btrfs_wq_submit_bio+0xb3/0xd0 [btrfs]
   btrfs_submit_metadata_bio+0x44/0xc0 [btrfs]
   submit_one_bio+0x61/0x70 [btrfs]
   btree_write_cache_pages+0x414/0x450 [btrfs]
   ? kobject_put+0x9a/0x1d0
   ? trace_hardirqs_on+0x1b/0xf0
   ? _raw_spin_unlock_irqrestore+0x3c/0x60
   ? free_debug_processing+0x1e1/0x2b0
   do_writepages+0x43/0xe0
   ? lock_acquired+0x199/0x490
   __writeback_single_inode+0x59/0x650
   writeback_single_inode+0xaf/0x120
   write_inode_now+0x94/0xd0
   iput+0x187/0x2b0
   close_ctree+0x2c6/0x2fa [btrfs]
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0x100/0x160
   task_work_run+0x68/0xb0
   exit_to_user_mode_prepare+0x1bb/0x1c0
   syscall_exit_to_user_mode+0x4b/0x260
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f3cfebabee7
  Code: ff 0b 00 f7 d8 64 89 01 (...)
  RSP: 002b:00007ffc9c9a05f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 00007f3cfecd1264 RCX: 00007f3cfebabee7
  RDX: ffffffffffffff78 RSI: 0000000000000000 RDI: 0000562b6b478000
  RBP: 0000562b6b473a30 R08: 0000000000000000 R09: 00007f3cfec6cbe0
  R10: 0000562b6b479fe0 R11: 0000000000000246 R12: 0000000000000000
  R13: 0000562b6b478000 R14: 0000562b6b473b40 R15: 0000562b6b473c60
  Modules linked in: btrfs dm_snapshot dm_thin_pool (...)
  ---[ end trace dd74718fef1ed5cc ]---

Finally when we remove the btrfs module (rmmod btrfs), there are several
warnings about objects that were allocated from our slabs but were never
freed, consequence of the transaction that was never committed and got
leaked:

  =============================================================================
  BUG btrfs_delayed_ref_head (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_ref_head on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  INFO: Slab 0x0000000094c2ae56 objects=24 used=2 fp=0x000000002bfa2521 flags=0x17fffc000010200
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? lock_release+0x20e/0x4c0
   kmem_cache_destroy+0x55/0x120
   btrfs_delayed_ref_exit+0x11/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x0000000050cbdd61 @offset=12104
  INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1894 cpu=6 pid=1729873
__slab_alloc.isra.0+0x109/0x1c0
kmem_cache_alloc+0x7bb/0x830
btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs]
btrfs_free_tree_block+0x128/0x360 [btrfs]
__btrfs_cow_block+0x489/0x5f0 [btrfs]
btrfs_cow_block+0xf7/0x220 [btrfs]
btrfs_search_slot+0x62a/0xc40 [btrfs]
btrfs_del_orphan_item+0x65/0xd0 [btrfs]
btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
open_ctree+0x125a/0x18a0 [btrfs]
btrfs_mount_root.cold+0x13/0xed [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xe0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=4292 cpu=2 pid=1729526
kmem_cache_free+0x34c/0x3c0
__btrfs_run_delayed_refs+0x1117/0x1290 [btrfs]
btrfs_run_delayed_refs+0x81/0x210 [btrfs]
commit_cowonly_roots+0xfb/0x300 [btrfs]
btrfs_commit_transaction+0x367/0xc40 [btrfs]
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x70
cleanup_mnt+0x100/0x160
task_work_run+0x68/0xb0
exit_to_user_mode_prepare+0x1bb/0x1c0
syscall_exit_to_user_mode+0x4b/0x260
entry_SYSCALL_64_after_hwframe+0x44/0xa9
  INFO: Object 0x0000000086e9b0ff @offset=12776
  INFO: Allocated in btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs] age=1900 cpu=6 pid=1729873
__slab_alloc.isra.0+0x109/0x1c0
kmem_cache_alloc+0x7bb/0x830
btrfs_add_delayed_tree_ref+0xbb/0x480 [btrfs]
btrfs_alloc_tree_block+0x2bf/0x360 [btrfs]
alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
__btrfs_cow_block+0x12d/0x5f0 [btrfs]
btrfs_cow_block+0xf7/0x220 [btrfs]
btrfs_search_slot+0x62a/0xc40 [btrfs]
btrfs_del_orphan_item+0x65/0xd0 [btrfs]
btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
open_ctree+0x125a/0x18a0 [btrfs]
btrfs_mount_root.cold+0x13/0xed [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xe0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
  INFO: Freed in __btrfs_run_delayed_refs+0x1117/0x1290 [btrfs] age=3141 cpu=6 pid=1729803
kmem_cache_free+0x34c/0x3c0
__btrfs_run_delayed_refs+0x1117/0x1290 [btrfs]
btrfs_run_delayed_refs+0x81/0x210 [btrfs]
btrfs_write_dirty_block_groups+0x17d/0x3d0 [btrfs]
commit_cowonly_roots+0x248/0x300 [btrfs]
btrfs_commit_transaction+0x367/0xc40 [btrfs]
close_ctree+0x113/0x2fa [btrfs]
generic_shutdown_super+0x6c/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x70
cleanup_mnt+0x100/0x160
task_work_run+0x68/0xb0
exit_to_user_mode_prepare+0x1bb/0x1c0
syscall_exit_to_user_mode+0x4b/0x260
entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_ref_head: Slab cache still has objects
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   btrfs_delayed_ref_exit+0x11/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 0b (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  =============================================================================
  BUG btrfs_delayed_tree_ref (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_tree_ref on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  INFO: Slab 0x0000000011f78dc0 objects=37 used=2 fp=0x0000000032d55d91 flags=0x17fffc000010200
  CPU: 3 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? lock_release+0x20e/0x4c0
   kmem_cache_destroy+0x55/0x120
   btrfs_delayed_ref_exit+0x1d/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x000000001a340018 @offset=4408
  INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1917 cpu=6 pid=1729873
__slab_alloc.isra.0+0x109/0x1c0
kmem_cache_alloc+0x7bb/0x830
btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs]
btrfs_free_tree_block+0x128/0x360 [btrfs]
__btrfs_cow_block+0x489/0x5f0 [btrfs]
btrfs_cow_block+0xf7/0x220 [btrfs]
btrfs_search_slot+0x62a/0xc40 [btrfs]
btrfs_del_orphan_item+0x65/0xd0 [btrfs]
btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
open_ctree+0x125a/0x18a0 [btrfs]
btrfs_mount_root.cold+0x13/0xed [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xe0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=4167 cpu=4 pid=1729795
kmem_cache_free+0x34c/0x3c0
__btrfs_run_delayed_refs+0x63d/0x1290 [btrfs]
btrfs_run_delayed_refs+0x81/0x210 [btrfs]
btrfs_commit_transaction+0x60/0xc40 [btrfs]
create_subvol+0x56a/0x990 [btrfs]
btrfs_mksubvol+0x3fb/0x4a0 [btrfs]
__btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs]
btrfs_ioctl_snap_create+0x58/0x80 [btrfs]
btrfs_ioctl+0x1a92/0x36f0 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
  INFO: Object 0x000000002b46292a @offset=13648
  INFO: Allocated in btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs] age=1923 cpu=6 pid=1729873
__slab_alloc.isra.0+0x109/0x1c0
kmem_cache_alloc+0x7bb/0x830
btrfs_add_delayed_tree_ref+0x9e/0x480 [btrfs]
btrfs_alloc_tree_block+0x2bf/0x360 [btrfs]
alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
__btrfs_cow_block+0x12d/0x5f0 [btrfs]
btrfs_cow_block+0xf7/0x220 [btrfs]
btrfs_search_slot+0x62a/0xc40 [btrfs]
btrfs_del_orphan_item+0x65/0xd0 [btrfs]
btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
open_ctree+0x125a/0x18a0 [btrfs]
btrfs_mount_root.cold+0x13/0xed [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xe0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
  INFO: Freed in __btrfs_run_delayed_refs+0x63d/0x1290 [btrfs] age=3164 cpu=6 pid=1729803
kmem_cache_free+0x34c/0x3c0
__btrfs_run_delayed_refs+0x63d/0x1290 [btrfs]
btrfs_run_delayed_refs+0x81/0x210 [btrfs]
commit_cowonly_roots+0xfb/0x300 [btrfs]
btrfs_commit_transaction+0x367/0xc40 [btrfs]
close_ctree+0x113/0x2fa [btrfs]
generic_shutdown_super+0x6c/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x70
cleanup_mnt+0x100/0x160
task_work_run+0x68/0xb0
exit_to_user_mode_prepare+0x1bb/0x1c0
syscall_exit_to_user_mode+0x4b/0x260
entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_tree_ref: Slab cache still has objects
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   btrfs_delayed_ref_exit+0x1d/0x35 [btrfs]
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  =============================================================================
  BUG btrfs_delayed_extent_op (Tainted: G    B   W        ): Objects remaining in btrfs_delayed_extent_op on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  INFO: Slab 0x00000000f145ce2f objects=22 used=1 fp=0x00000000af0f92cf flags=0x17fffc000010200
  CPU: 5 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   slab_err+0xb7/0xdc
   ? lock_acquired+0x199/0x490
   __kmem_cache_shutdown+0x1ac/0x3c0
   ? __mutex_unlock_slowpath+0x45/0x2a0
   kmem_cache_destroy+0x55/0x120
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 f5 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  INFO: Object 0x000000004cf95ea8 @offset=6264
  INFO: Allocated in btrfs_alloc_tree_block+0x1e0/0x360 [btrfs] age=1931 cpu=6 pid=1729873
__slab_alloc.isra.0+0x109/0x1c0
kmem_cache_alloc+0x7bb/0x830
btrfs_alloc_tree_block+0x1e0/0x360 [btrfs]
alloc_tree_block_no_bg_flush+0x4f/0x60 [btrfs]
__btrfs_cow_block+0x12d/0x5f0 [btrfs]
btrfs_cow_block+0xf7/0x220 [btrfs]
btrfs_search_slot+0x62a/0xc40 [btrfs]
btrfs_del_orphan_item+0x65/0xd0 [btrfs]
btrfs_find_orphan_roots+0x1bf/0x200 [btrfs]
open_ctree+0x125a/0x18a0 [btrfs]
btrfs_mount_root.cold+0x13/0xed [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xe0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
  INFO: Freed in __btrfs_run_delayed_refs+0xabd/0x1290 [btrfs] age=3173 cpu=6 pid=1729803
kmem_cache_free+0x34c/0x3c0
__btrfs_run_delayed_refs+0xabd/0x1290 [btrfs]
btrfs_run_delayed_refs+0x81/0x210 [btrfs]
commit_cowonly_roots+0xfb/0x300 [btrfs]
btrfs_commit_transaction+0x367/0xc40 [btrfs]
close_ctree+0x113/0x2fa [btrfs]
generic_shutdown_super+0x6c/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x70
cleanup_mnt+0x100/0x160
task_work_run+0x68/0xb0
exit_to_user_mode_prepare+0x1bb/0x1c0
syscall_exit_to_user_mode+0x4b/0x260
entry_SYSCALL_64_after_hwframe+0x44/0xa9
  kmem_cache_destroy btrfs_delayed_extent_op: Slab cache still has objects
  CPU: 3 PID: 1729921 Comm: rmmod Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x8d/0xb5
   kmem_cache_destroy+0x119/0x120
   exit_btrfs_fs+0xa/0x59 [btrfs]
   __x64_sys_delete_module+0x194/0x260
   ? fpregs_assert_state_consistent+0x1e/0x40
   ? exit_to_user_mode_prepare+0x55/0x1c0
   ? trace_hardirqs_on+0x1b/0xf0
   do_syscall_64+0x33/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f693e305897
  Code: 73 01 c3 48 8b 0d f9 (...)
  RSP: 002b:00007ffcf73eb508 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000559df504f760 RCX: 00007f693e305897
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559df504f7c8
  RBP: 00007ffcf73eb568 R08: 0000000000000000 R09: 0000000000000000
  R10: 00007f693e378ac0 R11: 0000000000000206 R12: 00007ffcf73eb740
  R13: 00007ffcf73ec5a6 R14: 0000559df504f2a0 R15: 0000559df504f760
  BTRFS: state leak: start 30408704 end 30425087 state 1 in tree 1 refs 1

Fix this issue by having the remount path stop the qgroup rescan worker
when we are remounting RO and teach the rescan worker to stop when a
remount is in progress. If later a remount in RW mode happens, we are
already resuming the qgroup rescan worker through the call to
btrfs_qgroup_rescan_resume(), so we do not need to worry about that.

Tested-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: merge critical sections of discard lock in workfn

[ Upstream commit 8fc058597a283e9a37720abb0e8d68e342b9387d ]

btrfs_discard_workfn() drops discard_ctl->lock just to take it again in
a moment in btrfs_discard_schedule_work(). Avoid that and also reuse
ktime.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix async discard stall

[ Upstream commit ea9ed87c73e87e044b2c58d658eb4ba5216bc488 ]

Might happen that bg->discard_eligible_time was changed without
rescheduling, so btrfs_discard_workfn() wakes up earlier than that new
time, peek_discard_list() returns NULL, and all work halts and goes to
sleep without further rescheduling even there are block groups to
discard.

It happens pretty often, but not so visible from the userspace because
after some time it usually will be kicked off anyway by someone else
calling btrfs_discard_reschedule_work().

Fix it by continue rescheduling if block group discard lists are not
empty.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: qmi: try to allocate a big block of DMA memory first

[ Upstream commit f6f92968e1e5a7a9d211faaebefc26ebe408dad7 ]

Not all firmware versions support allocating DMA memory in smaller blocks so
first try to allocate big block of DMA memory for QMI. If the allocation fails,
let firmware request multiple blocks of DMA memory with smaller size.

This also fixes an unnecessary error message seen during ath11k probe on
QCA6390:

ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0
ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: fixes possible oops in mtype_resize

[ Upstream commit 2b33d6ffa9e38f344418976b06057e2fc2aa9e2a ]

currently mtype_resize() can cause oops

        t = ip_set_alloc(htable_size(htable_bits));
        if (!t) {
                ret = -ENOMEM;
                goto out;
        }
        t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits));

Increased htable_bits can force htable_size() to return 0.
In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR,
so follwoing access to t->hregion should trigger an OOPS.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: fix crash caused by NULL rx_channel

[ Upstream commit 3597010630d0aa96f5778901e691c6068bb86318 ]

During connect and disconnect stress test, crashed happened
because ar->rx_channel is NULL. Fix it by checking whether
ar->rx_channel is NULL.

Crash stack is as below:
RIP: 0010:ath11k_dp_rx_h_ppdu+0x110/0x230 [ath11k]
[ 5028.808963]  ath11k_dp_rx_wbm_err+0x14a/0x360 [ath11k]
[ 5028.808970]  ath11k_dp_rx_process_wbm_err+0x41c/0x520 [ath11k]
[ 5028.808978]  ath11k_dp_service_srng+0x25e/0x2d0 [ath11k]
[ 5028.808982]  ath11k_pci_ext_grp_napi_poll+0x23/0x80 [ath11k_pci]
[ 5028.808986]  net_rx_action+0x27e/0x400
[ 5028.808990]  __do_softirq+0xfd/0x2bb
[ 5028.808993]  irq_exit+0xa6/0xb0
[ 5028.808995]  do_IRQ+0x56/0xe0
[ 5028.808997]  common_interrupt+0xf/0xf

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201211055613.9310-1-cjhuang@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875

[ Upstream commit c0bc969c176b10598b31d5d1a5edf9a5261f0a9f ]

xt875 comes up with a iva voltage of 1375000 and android runs at this too. fix
maximum voltage to be consistent with this.

Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: move symlink creation to arch/arc/Makefile to avoid race

[ Upstream commit c5e6ae563c802c4d828d42e134af64004db2e58c ]

If you run 'make uImage uImage.gz' with the parallel option, uImage.gz
will be created by two threads simultaneously.

This is because arch/arc/Makefile does not specify the dependency
between uImage and uImage.gz. Hence, GNU Make assumes they can be
built in parallel. One thread descends into arch/arc/boot/ to create
uImage, and another to create uImage.gz.

Please notice the same log is displayed twice in the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make -j$(nproc) ARCH=arc uImage uImage.gz
  [ snip ]
    LD      vmlinux
    SORTTAB vmlinux
    SYSMAP  System.map
    OBJCOPY arch/arc/boot/vmlinux.bin
    OBJCOPY arch/arc/boot/vmlinux.bin
    GZIP    arch/arc/boot/vmlinux.bin.gz
    GZIP    arch/arc/boot/vmlinux.bin.gz
    UIMAGE  arch/arc/boot/uImage.gz
    UIMAGE  arch/arc/boot/uImage.gz
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2109376 Bytes = 2059.94 KiB = 2.01 MiB
  Load Address: 80000000
  Entry Point:  80004000
    Image arch/arc/boot/uImage is ready
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2815455 Bytes = 2749.47 KiB = 2.69 MiB
  Load Address: 80000000
  Entry Point:  80004000

This is a race between the two threads trying to write to the same file
arch/arc/boot/uImage.gz. This is a potential problem that can generate
a broken file.

I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1:
add boot image dependencies to not generate invalid images").

I highly recommend to avoid such build rules that cause a race condition.

Move the uImage rule to arch/arc/Makefile.

Another strangeness is that arch/arc/boot/Makefile compares the
timestamps between $(obj)/uImage and $(obj)/uImage.*:

  $(obj)/uImage: $(obj)/uImage.$(suffix-y)
          @ln -sf $(notdir $<) $@
          @echo '  Image $@ is ready'

This does not work as expected since $(obj)/uImage is a symlink.
The symlink should be created in a phony target rule.

I used $(kecho) instead of echo to suppress the message
'Image arch/arc/boot/uImage is ready' when the -s option is given.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: add boot_targets to PHONY

[ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ]

The top-level boot_targets (uImage and uImage.*) should be phony
targets. They just let Kbuild descend into arch/arc/boot/ and create
files there.

If a file exists in the top directory with the same name, the boot
image will not be created.

You can confirm it by the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig all   # vmlinux will be built
  $ touch uImage.gz
  $ make ARCH=arc uImage.gz
  CALL    scripts/atomic/check-atomics.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  # arch/arc/boot/uImage.gz is not created

Specify the targets as PHONY to fix this.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: add uImage.lzma to the top-level target

[ Upstream commit f2712ec76a5433e5ec9def2bd52a95df1f96d050 ]

arch/arc/boot/Makefile supports uImage.lzma, but you cannot do
'make uImage.lzma' because the corresponding target is missing
in arch/arc/Makefile. Add it.

I also changed the assignment operator '+=' to ':=' since this is the
only place where we expect this variable to be set.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: build: remove non-existing bootpImage from KBUILD_IMAGE

[ Upstream commit 9836720911cfec25d3fbdead1c438bf87e0f2841 ]

The deb-pkg builds for ARCH=arc fail.

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make ARCH=arc bindeb-pkg
  SORTTAB vmlinux
  SYSMAP  System.map
  MODPOST Module.symvers
  make KERNELRELEASE=5.10.0-rc4 ARCH=arc KBUILD_BUILD_VERSION=2 -f ./Makefile intdeb-pkg
  sh ./scripts/package/builddeb
  cp: cannot stat 'arch/arc/boot/bootpImage': No such file or directory
  make[4]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1
  make[3]: *** [Makefile:1527: intdeb-pkg] Error 2
  make[2]: *** [debian/rules:13: binary-arch] Error 2
  dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
  make[1]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2
  make: *** [Makefile:1527: bindeb-pkg] Error 2

The reason is obvious; arch/arc/Makefile sets $(boot)/bootpImage as
the default image, but there is no rule to build it.

Remove the meaningless KBUILD_IMAGE assignment so it will fallback
to the default vmlinux. With this change, you can build the deb package.

I removed the 'bootpImage' target as well. At best, it provides
'make bootpImage' as an alias of 'make vmlinux', but I do not see
much sense in doing so.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: drop mm and files after task_work_run

[ Upstream commit d434ab6db524ab1efd0afad4ffa1ee65ca6ac097 ]

__io_req_task_submit() run by task_work can set mm and files, but
io_sq_thread() in some cases, and because __io_sq_thread_acquire_mm()
and __io_sq_thread_acquire_files() do a simple current->mm/files check
it may end up submitting IO with mm/files of another task.

We also need to drop it after in the end to drop potentially grabbed
references to them.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't take files/mm for a dead task

[ Upstream commit 621fadc22365f3cf307bcd9048e3372e9ee9cdcc ]

In rare cases a task may be exiting while io_ring_exit_work() trying to
cancel/wait its requests. It's ok for __io_sq_thread_acquire_mm()
because of SQPOLL check, but is not for __io_sq_thread_acquire_files().
Play safe and fail for both of them.

Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: don't leak old mountpoint samples

[ Upstream commit 5a3b590d4b2db187faa6f06adc9a53d6199fb1f9 ]

When the first file is opened, ext4 samples the mountpoint of the
filesystem in 64 bytes of the super block.  It does so using
strlcpy(), this means that the remaining bytes in the super block
string buffer are untouched.  If the mount point before had a longer
path than the current one, it can be reconstructed.

Consider the case where the fs was mounted to "/media/johnjdeveloper"
and later to "/".  The super block buffer then contains
"/\x00edia/johnjdeveloper".

This case was seen in the wild and caused confusion how the name
of a developer ands up on the super block of a filesystem used
in production...

Fix this by using strncpy() instead of strlcpy().  The superblock
field is defined to be a fixed-size char array, and it is already
marked using __nonstring in fs/ext4/ext4.h.  The consumer of the field
in e2fsprogs already assumes that in the case of a 64+ byte mount
path, that s_last_mounted will not be NUL terminated.

Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.edu
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: tree-checker: check if chunk item end overflows

[ Upstream commit 347fb0cfc9bab5195c6701e62eda488310d7938f ]

While mounting a crafted image provided by user, kernel panics due to
the invalid chunk item whose end is less than start.

  [66.387422] loop: module loaded
  [66.389773] loop0: detected capacity change from 262144 to 0
  [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613)
  [66.431061] BTRFS info (device loop0): disk space caching is enabled
  [66.431078] BTRFS info (device loop0): has skinny extents
  [66.437101] BTRFS error: insert state: end < start 29360127 37748736
  [66.437136] ------------[ cut here ]------------
  [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs]
  [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G           O      5.11.0-rc1-custom #45
  [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
  [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs]
  [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286
  [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001
  [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0
  [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000
  [66.437447] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [66.437451] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [66.437460] PKRU: 55555554
  [66.437464] Call Trace:
  [66.437475]  set_extent_bit+0x652/0x740 [btrfs]
  [66.437539]  set_extent_bits_nowait+0x1d/0x20 [btrfs]
  [66.437576]  add_extent_mapping+0x1e0/0x2f0 [btrfs]
  [66.437621]  read_one_chunk+0x33c/0x420 [btrfs]
  [66.437674]  btrfs_read_chunk_tree+0x6a4/0x870 [btrfs]
  [66.437708]  ? kvm_sched_clock_read+0x18/0x40
  [66.437739]  open_ctree+0xb32/0x1734 [btrfs]
  [66.437781]  ? bdi_register_va+0x1b/0x20
  [66.437788]  ? super_setup_bdi_name+0x79/0xd0
  [66.437810]  btrfs_mount_root.cold+0x12/0xeb [btrfs]
  [66.437854]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.437873]  legacy_get_tree+0x34/0x60
  [66.437880]  vfs_get_tree+0x2d/0xc0
  [66.437888]  vfs_kern_mount.part.0+0x78/0xc0
  [66.437897]  vfs_kern_mount+0x13/0x20
  [66.437902]  btrfs_mount+0x11f/0x3c0 [btrfs]
  [66.437940]  ? kfree+0x5ff/0x670
  [66.437944]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.437962]  legacy_get_tree+0x34/0x60
  [66.437974]  vfs_get_tree+0x2d/0xc0
  [66.437983]  path_mount+0x48c/0xd30
  [66.437998]  __x64_sys_mount+0x108/0x140
  [66.438011]  do_syscall_64+0x38/0x50
  [66.438018]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [66.438023] RIP: 0033:0x7f0138827f6e
  [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e
  [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0
  [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001
  [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440
  [66.438078] irq event stamp: 18169
  [66.438082] hardirqs last  enabled at (18175): [<ffffffffb81154bf>] console_unlock+0x4ff/0x5f0
  [66.438088] hardirqs last disabled at (18180): [<ffffffffb8115427>] console_unlock+0x467/0x5f0
  [66.438092] softirqs last  enabled at (16910): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20
  [66.438097] softirqs last disabled at (16905): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20
  [66.438103] ---[ end trace e114b111db64298b ]---
  [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127
  [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists)
  [66.441069] ------------[ cut here ]------------
  [66.441072] kernel BUG at fs/btrfs/extent_io.c:679!
  [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G        W  O      5.11.0-rc1-custom #45
  [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
  [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs]
  [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246
  [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001
  [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0
  [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000
  [66.458356] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [66.459841] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [66.462196] PKRU: 55555554
  [66.462692] Call Trace:
  [66.463139]  set_extent_bit.cold+0x30/0x98 [btrfs]
  [66.464049]  set_extent_bits_nowait+0x1d/0x20 [btrfs]
  [66.490466]  add_extent_mapping+0x1e0/0x2f0 [btrfs]
  [66.514097]  read_one_chunk+0x33c/0x420 [btrfs]
  [66.534976]  btrfs_read_chunk_tree+0x6a4/0x870 [btrfs]
  [66.555718]  ? kvm_sched_clock_read+0x18/0x40
  [66.575758]  open_ctree+0xb32/0x1734 [btrfs]
  [66.595272]  ? bdi_register_va+0x1b/0x20
  [66.614638]  ? super_setup_bdi_name+0x79/0xd0
  [66.633809]  btrfs_mount_root.cold+0x12/0xeb [btrfs]
  [66.652938]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.671925]  legacy_get_tree+0x34/0x60
  [66.690300]  vfs_get_tree+0x2d/0xc0
  [66.708221]  vfs_kern_mount.part.0+0x78/0xc0
  [66.725808]  vfs_kern_mount+0x13/0x20
  [66.742730]  btrfs_mount+0x11f/0x3c0 [btrfs]
  [66.759350]  ? kfree+0x5ff/0x670
  [66.775441]  ? __kmalloc_track_caller+0x217/0x3b0
  [66.791750]  legacy_get_tree+0x34/0x60
  [66.807494]  vfs_get_tree+0x2d/0xc0
  [66.823349]  path_mount+0x48c/0xd30
  [66.838753]  __x64_sys_mount+0x108/0x140
  [66.854412]  do_syscall_64+0x38/0x50
  [66.869673]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [66.885093] RIP: 0033:0x7f0138827f6e
  [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e
  [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0
  [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001
  [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440
  [67.216138] ---[ end trace e114b111db64298c ]---
  [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs]
  [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246
  [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000
  [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff
  [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001
  [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0
  [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000
  [67.465436] FS:  00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000
  [67.511660] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0
  [67.558449] PKRU: 55555554
  [67.581146] note: mount[613] exited with preempt_count 2

The image has a chunk item which has a logical start 37748736 and length
18446744073701163008 (-8M). The calculated end 29360127 overflows.
EEXIST was caught by insert_state() because of the duplicate end and
extent_io_tree_panic() was called.

Add overflow check of chunk item end to tree checker so it can be
detected early at mount time.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Add Lenovo Powered USB-C Travel Hub

commit cb82a54904a99df9e8f9e9d282046055dae5a730 upstream.

This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to
use the cdc_ether driver. However, using this driver, with the system
suspended the device constantly sends pause-frames as soon as the
receive buffer fills up. This causes issues with other devices, where
some Ethernet switches stop forwarding packets altogether.

Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.

Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac: intel: change all EHL/TGL to auto detect phy addr

commit bff6f1db91e330d7fba56f815cdbc412c75fe163 upstream.

Set all EHL/TGL phy_addr to -1 so that the driver will automatically
detect it at run-time by probing all the possible 32 addresses.

Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Link: https://lore.kernel.org/r/20201106094341.4241-1-vee.khee.wong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: defer decryption to a tasklet if interrupts disabled

commit c87a95dc28b1431c7e77e2c0c983cf37698089d2 upstream.

On some specific hardware on early boot we occasionally get:

[ 1193.920255][    T0] BUG: sleeping function called from invalid context at mm/mempool.c:381
[ 1193.936616][    T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69
[ 1193.953233][    T0] no locks held by swapper/69/0.
[ 1193.965871][    T0] irq event stamp: 575062
[ 1193.977724][    T0] hardirqs last  enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0
[ 1194.002762][    T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80
[ 1194.029035][    T0] softirqs last  enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.054227][    T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.079389][    T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1
[ 1194.104103][    T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020
[ 1194.119591][    T0] Call Trace:
[ 1194.130233][    T0]  dump_stack+0x9a/0xcc
[ 1194.141617][    T0]  ___might_sleep.cold+0x180/0x1b0
[ 1194.153825][    T0]  mempool_alloc+0x16b/0x300
[ 1194.165313][    T0]  ? remove_element+0x160/0x160
[ 1194.176961][    T0]  ? blk_mq_end_request+0x4b/0x490
[ 1194.188778][    T0]  crypt_convert+0x27f6/0x45f0 [dm_crypt]
[ 1194.201024][    T0]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1194.212906][    T0]  ? module_assert_mutex_or_preempt+0x3e/0x70
[ 1194.225318][    T0]  ? __module_address.part.0+0x1b/0x3a0
[ 1194.237212][    T0]  ? is_kernel_percpu_address+0x5b/0x190
[ 1194.249238][    T0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt]
[ 1194.261593][    T0]  ? is_module_address+0x25/0x40
[ 1194.272905][    T0]  ? static_obj+0x8a/0xc0
[ 1194.283582][    T0]  ? lockdep_init_map_waits+0x26a/0x700
[ 1194.295570][    T0]  ? __raw_spin_lock_init+0x39/0x110
[ 1194.307330][    T0]  kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt]
[ 1194.320496][    T0]  ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt]
[ 1194.333203][    T0]  blk_update_request+0x6d7/0x1500
[ 1194.344841][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.356831][    T0]  blk_mq_end_request+0x4b/0x490
[ 1194.367994][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.379693][    T0]  flush_smp_call_function_queue+0x24b/0x560
[ 1194.391847][    T0]  flush_smp_call_function_from_idle+0x59/0x80
[ 1194.403969][    T0]  do_idle+0x287/0x450
[ 1194.413891][    T0]  ? arch_cpu_idle_exit+0x40/0x40
[ 1194.424716][    T0]  ? lockdep_hardirqs_on_prepare+0x286/0x3f0
[ 1194.436399][    T0]  ? _raw_spin_unlock_irqrestore+0x39/0x40
[ 1194.447759][    T0]  cpu_startup_entry+0x19/0x20
[ 1194.458038][    T0]  secondary_startup_64_no_verify+0xb0/0xbb

IO completion can be queued to a different CPU by the block subsystem as a "call
single function/data". The CPU may run these routines from the idle task, but it
does so with interrupts disabled.

It is not a good idea to do decryption with irqs disabled even in an idle task
context, so just defer it to a tasklet (as is done with requests from hard irqs).

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: do not call bio_endio() from the dm-crypt tasklet

commit 8e14f610159d524cd7aac37982826d3ef75c09e8 upstream.

Sometimes, when dm-crypt executes decryption in a tasklet, we may get
"BUG: KASAN: use-after-free in tasklet_action_common.constprop..."
with a kasan-enabled kernel.

When the decryption fully completes in the tasklet, dm-crypt will call
bio_endio(), which in turn will call clone_endio() from dm.c core code. That
function frees the resources associated with the bio, including per bio private
structures. For dm-crypt it will free the current struct dm_crypt_io, which
contains our tasklet object, causing use-after-free, when the tasklet is being
dequeued by the kernel.

To avoid this, do not call bio_endio() from the current tasklet context, but
delay its execution to the dm-crypt IO workqueue.

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: do not wait for backlogged crypto request completion in softirq

commit 8abec36d1274bbd5ae8f36f3658b9abb3db56c31 upstream.

Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd
workqueues") made it possible for some code paths in dm-crypt to be
executed in softirq context, when the underlying driver processes IO
requests in interrupt/softirq context.

When Crypto API backlogs a crypto request, dm-crypt uses
wait_for_completion to avoid sending further requests to an already
overloaded crypto driver. However, if the code is executing in softirq
context, we might get the following stacktrace:

[  210.235213][    C0] BUG: scheduling while atomic: fio/2602/0x00000102
[  210.236701][    C0] Modules linked in:
[  210.237566][    C0] CPU: 0 PID: 2602 Comm: fio Tainted: G        W         5.10.0+ #50
[  210.239292][    C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[  210.241233][    C0] Call Trace:
[  210.241946][    C0]  <IRQ>
[  210.242561][    C0]  dump_stack+0x7d/0xa3
[  210.243466][    C0]  __schedule_bug.cold+0xb3/0xc2
[  210.244539][    C0]  __schedule+0x156f/0x20d0
[  210.245518][    C0]  ? io_schedule_timeout+0x140/0x140
[  210.246660][    C0]  schedule+0xd0/0x270
[  210.247541][    C0]  schedule_timeout+0x1fb/0x280
[  210.248586][    C0]  ? usleep_range+0x150/0x150
[  210.249624][    C0]  ? unpoison_range+0x3a/0x60
[  210.250632][    C0]  ? ____kasan_kmalloc.constprop.0+0x82/0xa0
[  210.251949][    C0]  ? unpoison_range+0x3a/0x60
[  210.252958][    C0]  ? __prepare_to_swait+0xa7/0x190
[  210.254067][    C0]  do_wait_for_common+0x2ab/0x370
[  210.255158][    C0]  ? usleep_range+0x150/0x150
[  210.256192][    C0]  ? bit_wait_io_timeout+0x160/0x160
[  210.257358][    C0]  ? blk_update_request+0x757/0x1150
[  210.258582][    C0]  ? _raw_spin_lock_irq+0x82/0xd0
[  210.259674][    C0]  ? _raw_read_unlock_irqrestore+0x30/0x30
[  210.260917][    C0]  wait_for_completion+0x4c/0x90
[  210.261971][    C0]  crypt_convert+0x19a6/0x4c00
[  210.263033][    C0]  ? _raw_spin_lock_irqsave+0x87/0xe0
[  210.264193][    C0]  ? kasan_set_track+0x1c/0x30
[  210.265191][    C0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0
[  210.266283][    C0]  ? kmem_cache_free+0x104/0x470
[  210.267363][    C0]  ? crypt_endio+0x91/0x180
[  210.268327][    C0]  kcryptd_crypt_read_convert+0x30e/0x420
[  210.269565][    C0]  blk_update_request+0x757/0x1150
[  210.270563][    C0]  blk_mq_end_request+0x4b/0x480
[  210.271680][    C0]  blk_done_softirq+0x21d/0x340
[  210.272775][    C0]  ? _raw_spin_lock+0x81/0xd0
[  210.273847][    C0]  ? blk_mq_stop_hw_queue+0x30/0x30
[  210.275031][    C0]  ? _raw_read_lock_irq+0x40/0x40
[  210.276182][    C0]  __do_softirq+0x190/0x611
[  210.277203][    C0]  ? handle_edge_irq+0x221/0xb60
[  210.278340][    C0]  asm_call_irq_on_stack+0x12/0x20
[  210.279514][    C0]  </IRQ>
[  210.280164][    C0]  do_softirq_own_stack+0x37/0x40
[  210.281281][    C0]  irq_exit_rcu+0x110/0x1b0
[  210.282286][    C0]  common_interrupt+0x74/0x120
[  210.283376][    C0]  asm_common_interrupt+0x1e/0x40
[  210.284496][    C0] RIP: 0010:_aesni_enc1+0x65/0xb0

Fix this by making crypt_convert function reentrant from the point of
a single bio and make dm-crypt defer further bio processing to a
workqueue, if Crypto API backlogs a request in interrupt context.

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq

commit d68b29584c25dbacd01ed44a3e45abb35353f1de upstream.

Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd
workqueues") made it possible for some code paths in dm-crypt to be
executed in softirq context, when the underlying driver processes IO
requests in interrupt/softirq context.

In this case sometimes when allocating a new crypto request we may get
a stacktrace like below:

[  210.103008][    C0] BUG: sleeping function called from invalid context at mm/mempool.c:381
[  210.104746][    C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio
[  210.106599][    C0] CPU: 0 PID: 2602 Comm: fio Tainted: G        W         5.10.0+ #50
[  210.108331][    C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[  210.110212][    C0] Call Trace:
[  210.110921][    C0]  <IRQ>
[  210.111527][    C0]  dump_stack+0x7d/0xa3
[  210.112411][    C0]  ___might_sleep.cold+0x122/0x151
[  210.113527][    C0]  mempool_alloc+0x16b/0x2f0
[  210.114524][    C0]  ? __queue_work+0x515/0xde0
[  210.115553][    C0]  ? mempool_resize+0x700/0x700
[  210.116586][    C0]  ? crypt_endio+0x91/0x180
[  210.117479][    C0]  ? blk_update_request+0x757/0x1150
[  210.118513][    C0]  ? blk_mq_end_request+0x4b/0x480
[  210.119572][    C0]  ? blk_done_softirq+0x21d/0x340
[  210.120628][    C0]  ? __do_softirq+0x190/0x611
[  210.121626][    C0]  crypt_convert+0x29f9/0x4c00
[  210.122668][    C0]  ? _raw_spin_lock_irqsave+0x87/0xe0
[  210.123824][    C0]  ? kasan_set_track+0x1c/0x30
[  210.124858][    C0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0
[  210.125930][    C0]  ? kmem_cache_free+0x104/0x470
[  210.126973][    C0]  ? crypt_endio+0x91/0x180
[  210.127947][    C0]  kcryptd_crypt_read_convert+0x30e/0x420
[  210.129165][    C0]  blk_update_request+0x757/0x1150
[  210.130231][    C0]  blk_mq_end_request+0x4b/0x480
[  210.131294][    C0]  blk_done_softirq+0x21d/0x340
[  210.132332][    C0]  ? _raw_spin_lock+0x81/0xd0
[  210.133289][    C0]  ? blk_mq_stop_hw_queue+0x30/0x30
[  210.134399][    C0]  ? _raw_read_lock_irq+0x40/0x40
[  210.135458][    C0]  __do_softirq+0x190/0x611
[  210.136409][    C0]  ? handle_edge_irq+0x221/0xb60
[  210.137447][    C0]  asm_call_irq_on_stack+0x12/0x20
[  210.138507][    C0]  </IRQ>
[  210.139118][    C0]  do_softirq_own_stack+0x37/0x40
[  210.140191][    C0]  irq_exit_rcu+0x110/0x1b0
[  210.141151][    C0]  common_interrupt+0x74/0x120
[  210.142171][    C0]  asm_common_interrupt+0x1e/0x40

Fix this by allocating crypto requests with GFP_ATOMIC mask in
interrupt context.

Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix the maximum number of arguments

commit 17ffc193cdc6dc7a613d00d8ad47fc1f801b9bf0 upstream.

Advance the maximum number of arguments from 9 to 15 to account for
all potential feature flags that may be supplied.

Linux 4.19 added "meta_device"
(356d9d52e1221ba0c9f10b8b38652f78a5298329) and "recalculate"
(a3fcf7253139609bf9ff901fbf955fba047e75dd) flags.

Commit 468dfca38b1a6fbdccd195d875599cb7c8875cd9 added
"sectors_per_bit" and "bitmap_flush_interval".

Commit 84597a44a9d86ac949900441cea7da0af0f2f473 added
"allow_discards".

And the commit d537858ac8aaf4311b51240893add2fc62003b97 added
"fix_padding".

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix flush with external metadata device

commit 9b5948267adc9e689da609eb61cf7ed49cae5fa8 upstream.

With external metadata device, flush requests are not passed down to the
data device.

Fix this by submitting the flush request in dm_integrity_flush_buffers. In
order to not degrade performance, we overlap the data device flush with
the metadata device flush.

Reported-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm snapshot: flush merged data before committing metadata

commit fcc42338375a1e67b8568dbb558f8b784d0f3b01 upstream.

If the origin device has a volatile write-back cache and the following
events occur:

1: After finishing merge operation of one set of exceptions,
   merge_callback() is invoked.
2: Update the metadata in COW device tracking the merge completion.
   This update to COW device is flushed cleanly.
3: System crashes and the origin device's cache where the recent
   merge was completed has not been flushed.

During the next cycle when we read the metadata from the COW device,
we will skip reading those metadata whose merge was completed in
step (1). This will lead to data loss/corruption.

To address this, flush the origin device post merge IO before
updating the metadata.

Cc: stable@vger.kernel.org
Signed-off-by: Akilesh Kailash <akailash@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm raid: fix discard limits for raid1

commit cc07d72bf350b77faeffee1c37bc52197171473f upstream.

Block core warned that discard_granularity was 0 for dm-raid with
personality of raid1.  Reason is that raid_io_hints() was incorrectly
special-casing raid1 rather than raid0.

Fix raid_io_hints() by removing discard limits settings for
raid1. Check for raid0 instead.

Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Stephan Bärwolf <stephan@matrixstorm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/process_vm_access.c: include compat.h

commit eb351d75ce1e75b4f793d609efac08426ca50acd upstream.

Fix the build error:

  mm/process_vm_access.c:277:5: error: implicit declaration of function 'in_compat_syscall'; did you mean 'in_ia32_syscall'? [-Werror=implicit-function-declaration]

Fixes: 38dc5079da7081e "Fix compat regression in process_vm_rw()"
Reported-by: syzbot+5b0d0de84d6c65b8dd2b@syzkaller.appspotmail.com
Cc: Kyle Huey <me@kylehuey.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: fix potential missing huge page size info

commit 0eb98f1588c2cc7a79816d84ab18a55d254f481c upstream.

The huge page size is encoded for VM_FAULT_HWPOISON errors only.  So if
we return VM_FAULT_HWPOISON, huge page size would just be ignored.

Link: https://lkml.kernel.org/r/20210107123449.38481-1-linmiaohe@huawei.com
Fixes: aa50d3a7aa81 ("Encode huge page size for VM_FAULT_HWPOISON errors")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmalloc.c: fix potential memory leak

commit c22ee5284cf58017fa8c6d21d8f8c68159b6faab upstream.

In VM_MAP_PUT_PAGES case, we should put pages and free array in vfree.
But we missed to set area->nr_pages in vmap().  So we would fail to put
pages in __vunmap() because area->nr_pages = 0.

Link: https://lkml.kernel.org/r/20210107123541.39206-1-linmiaohe@huawei.com
Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compiler.h: Raise minimum version of GCC to 5.1 for arm64

commit dca5244d2f5b94f1809f0c02a549edf41ccd5493 upstream.

GCC versions >= 4.9 and < 5.1 have been shown to emit memory references
beyond the stack pointer, resulting in memory corruption if an interrupt
is taken after the stack pointer has been adjusted but before the
reference has been executed. This leads to subtle, infrequent data
corruption such as the EXT4 problems reported by Russell King at the
link below.

Life is too short for buggy compilers, so raise the minimum GCC version
required by arm64 to 5.1.

Reported-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/privcmd: allow fetching resource sizes

commit ef3a575baf53571dc405ee4028e26f50856898e7 upstream.

Allow issuing an IOCTL_PRIVCMD_MMAP_RESOURCE ioctl with num = 0 and
addr = 0 in order to fetch the size of a specific resource.

Add a shortcut to the default map resource path, since fetching the
size requires no address to be passed in, and thus no VMA to setup.

This is missing from the initial implementation, and causes issues
when mapping resources that don't have fixed or known sizes.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: stable@vger.kernel.org # >= 4.18
Link: https://lore.kernel.org/r/20210112115358.23346-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: scan: Harden acpi_device_add() against device ID overflows

commit a58015d638cd4e4555297b04bec9b49028369075 upstream.

Linux VM on Hyper-V crashes with the latest mainline:

[    4.069624] detected buffer overflow in strcpy
[    4.077733] kernel BUG at lib/string.c:1149!
..
[    4.085819] RIP: 0010:fortify_panic+0xf/0x11
...
[    4.085819] Call Trace:
[    4.085819]  acpi_device_add.cold.15+0xf2/0xfb
[    4.085819]  acpi_add_single_object+0x2a6/0x690
[    4.085819]  acpi_bus_check_add+0xc6/0x280
[    4.085819]  acpi_ns_walk_namespace+0xda/0x1aa
[    4.085819]  acpi_walk_namespace+0x9a/0xc2
[    4.085819]  acpi_bus_scan+0x78/0x90
[    4.085819]  acpi_scan_init+0xfa/0x248
[    4.085819]  acpi_init+0x2c1/0x321
[    4.085819]  do_one_initcall+0x44/0x1d0
[    4.085819]  kernel_init_freeable+0x1ab/0x1f4

This is because of the recent buffer overflow detection in the
commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in
fortified string functions")

Here acpi_device_bus_id->bus_id can only hold 14 characters, while the
the acpi_device_hid(device) returns a 22-char string
"HYPER_V_GEN_COUNTER_V1".

Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a
string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8
chars.

The field bus_id in struct acpi_device_bus_id was originally defined as
char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the
commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI
devices")

Fix the issue by changing the field bus_id to const char *, and use
kstrdup_const() to initialize it.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-By: Jethro Beekman <jethro@fortanix.com>
[ rjw: Subject change, whitespace adjustment ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()

commit f2bc3af6353cb2a33dfa9d270d999d839eef54cb upstream.

In ocrdma_dealloc_ucontext_pd() uctx->cntxt_pd is assigned to the variable
pd and then after uctx->cntxt_pd is freed, the variable pd is passed to
function _ocrdma_dealloc_pd() which dereferences pd directly or through
its call to ocrdma_mbx_dealloc_pd().

Reorder the free using the variable pd.

Cc: stable@vger.kernel.org
Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20201230024653.1516495-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: relocatable: fix possible boot hangup with KASLR enabled

commit 69e976831cd53f9ba304fd20305b2025ecc78eab upstream.

LLVM-built Linux triggered a boot hangup with KASLR enabled.

arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner,
which is a string constant, as a random seed, but accesses it
as an array of unsigned long (in rotate_xor()).
When the address of linux_banner is not aligned to sizeof(long),
such access emits unaligned access exception and hangs the kernel.

Use PTR_ALIGN() to align input address to sizeof(long) and also
align down the input length to prevent possible access-beyond-end.

Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps

commit 698222457465ce343443be81c5512edda86e5914 upstream.

Patches that introduced NT_FILE and NT_SIGINFO notes back in 2012
had taken care of native (fs/binfmt_elf.c) and compat (fs/compat_binfmt_elf.c)
coredumps; unfortunately, compat on mips (which does not go through the
usual compat_binfmt_elf.c) had not been noticed.

As the result, both N32 and O32 coredumps on 64bit mips kernels
have those sections malformed enough to confuse the living hell out of
all gdb and readelf versions (up to and including the tip of binutils-gdb.git).

Longer term solution is to make both O32 and N32 compat use the
regular compat_binfmt_elf.c, but that's too much for backports.  The minimal
solution is to do in arch/mips/kernel/binfmt_elf[on]32.c the same thing
those patches have done in fs/compat_binfmt_elf.c

Cc: stable@kernel.org # v3.7+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB

commit 4d4f9c1a17a3480f8fe523673f7232b254d724b7 upstream.

The compressed payload is not necesarily 4-byte aligned, at least when
compiling with Clang. In that case, the 4-byte value appended to the
compressed payload that corresponds to the uncompressed kernel image
size must be read using get_unaligned_le32().

This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic
JZ4770 board).

Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: lib: uncached: fix non-standard usage of variable 'sp'

commit 5b058973d3205578aa6c9a71392e072a11ca44ef upstream.

When building mips tinyconfig with clang the following warning show up:

arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
        if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
            ^~
arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning
        register long sp __asm__("$sp");
                        ^
                         = 0
1 warning generated.

Rework to make an explicit inline move, instead of the non-standard use
of specifying registers for local variables. This is what's written
from the gcc-10 manual [1] about specifying registers for local
variables:

"6.47.5.2 Specifying Registers for Local Variables
.................................................
[...]

"The only supported use for this feature is to specify registers for
input and output operands when calling Extended 'asm' (*note Extended
Asm::).  [...]".

[1] https://docs.w3cub.com/gcc~10/local-register-variables
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: fix Section mismatch in reference

commit ad4fddef5f2345aa9214e979febe2f47639c10d9 upstream.

When building mips tinyconfig with clang the following error show up:

WARNING: modpost: vmlinux.o(.text+0x1940c): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson3_sc_init()
The function r4k_cache_init() references
the function __init loongson3_sc_init().
This is often because r4k_cache_init lacks a __init
annotation or the annotation of loongson3_sc_init is wrong.

Remove marked __init from function loongson3_sc_init(),
mips_sc_probe_cm3(), and mips_sc_probe().

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fix KASAN memory mapping.

commit c25a053e15778f6b4d6553708673736e27a6c2cf upstream.

Use virtual address instead of physical address when translating
the address to shadow memory by kasan_mem_to_shadow().

Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL

commit 0aa2ec8a475fb505fd98d93bbcf4e03beeeebcb6 upstream.

The patch fix commit: ad5d112 ("riscv: use vDSO common flow to
reduce the latency of the time-related functions").

The GENERIC_TIME_VSYSCALL should be CONFIG_GENERIC_TIME_VSYSCALL
or vgettimeofday won't work.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: return -ENOSYS for syscall -1

commit cf7b2ae4d70432fa94ebba3fbaab825481ae7189 upstream.

Properly return -ENOSYS for syscall -1 instead of leaving the return value
uninitialized.  This fixes the strace teststuite.

Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Drop a duplicated PAGE_KERNEL_EXEC

commit 0ea02c73775277001c651ad4a0e83781a9acf406 upstream.

commit b91540d52a08 ("RISC-V: Add EFI runtime services") add
a duplicated PAGE_KERNEL_EXEC, kill it.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Fixes: b91540d52a08 ("RISC-V: Add EFI runtime services")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix interrupted close commands

commit 2659d3bff3e1b000f49907d0839178b101a89887 upstream.

Retry close command if it gets interrupted to not leak open handles on
the server.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reported-by: Duncan Findlay <duncf@duncf.ca>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Fixes: 6988a619f5b7 ("cifs: allow syscalls to be restarted in __smb_send_rqst()")
Cc: stable@vger.kernel.org
Reviewd-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: check pointer before freeing

commit 77b6ec01c29aade01701aa30bf1469acc7f2be76 upstream.

clang static analysis reports this problem

dfs_cache.c:591:2: warning: Argument to kfree() is a constant address
  (18446744073709551614), which is not memory allocated by malloc()
        kfree(vi);
        ^~~~~~~~~

In dfs_cache_del_vol() the volume info pointer 'vi' being freed
is the return of a call to find_vol().  The large constant address
is find_vol() returning an error.

Add an error check to dfs_cache_del_vol() similar to the one done
in dfs_cache_update_vol().

Fixes: 54be1f6c1c37 ("cifs: Add DFS cache routines")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
CC: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix bug for rename with RENAME_WHITEOUT

commit 6b4b8e6b4ad8553660421d6360678b3811d5deb9 upstream.

We got a "deleted inode referenced" warning cross our fsstress test. The
bug can be reproduced easily with following steps:

  cd /dev/shm
  mkdir test/
  fallocate -l 128M img
  mkfs.ext4 -b 1024 img
  mount img test/
  dd if=/dev/zero of=test/foo bs=1M count=128
  mkdir test/dir/ && cd test/dir/
  for ((i=0;i<1000;i++)); do touch file$i; done # consume all block
  cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD,
    /dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in
    ext4_rename will return ENOSPC!!
  cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1
  We will get the output:
  "ls: cannot access 'test/dir/file1': Structure needs cleaning"
  and the dmesg show:
  "EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls:
  deleted inode referenced: 139"

ext4_rename will create a special inode for whiteout and use this 'ino'
to replace the source file's dir entry 'ino'. Once error happens
latter(the error above was the ENOSPC return from ext4_add_entry in
ext4_rename since all space has been consumed), the cleanup do drop the
nlink for whiteout, but forget to restore 'ino' with source file. This
will trigger the bug describle as above.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Fixes: cd808deced43 ("ext4: support RENAME_WHITEOUT")
Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix wrong list_splice in ext4_fc_cleanup

commit 31e203e09f036f48e7c567c2d32df0196bbd303f upstream.

After full/fast commit, entries in staging queue are promoted to main
queue. In ext4_fs_cleanup function, it splice to staging queue to
staging queue.

Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path")
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201230094851epcms2p6eeead8cc984379b37b2efd21af90fd1a@epcms2p6
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR

commit 23dd561ad9eae02b4d51bb502fe4e1a0666e9567 upstream.

1: ext4_iget/ext4_find_extent never returns NULL, use IS_ERR
instead of IS_ERR_OR_NULL to fix this.

2: ext4_fc_replay_inode should set the inode to NULL when IS_ERR.
and go to call iput properly.

Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201230033827.3996064-1-yili@winhong.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/bootconfig: Add tracing_on support to helper scripts

commit 55ed4560774d81d7343223b8fd2784c530a9c6c1 upstream.

Add ftrace.instance.INSTANCE.tracing_on support to ftrace2bconf.sh
and bconf2ftrace.sh.

commit 8490db06f914 ("tracing/boot: Add per-instance tracing_on
option support") added the per-instance tracing_on option,
but forgot to update the helper scripts.

Link: https://lkml.kernel.org/r/160749166410.3497930.14204335886811029800.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 8490db06f914 ("tracing/boot: Add per-instance tracing_on option support")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/kprobes: Do the notrace functions check without kprobes on ftrace

commit 7bb83f6fc4ee84e95d0ac0d14452c2619fb3fe70 upstream.

Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.

This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.

Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 45408c4f92506 ("tracing: kprobes: Prohibit probing on notrace function")
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: sii902x: Enable I/O and core VCC supplies if present

commit cc5f7e2fcbe396f2f461cd67c872af771a334bca upstream.

On the SII9022, the IOVCC and CVCC12 supplies must reach the correct
voltage before the reset sequence is initiated. On most boards, this
assumption is true at boot-up, so initialization succeeds.

However, when we try to initialize the chip with incorrect supply
voltages, it will not respond to I2C requests. sii902x_probe() fails
with -ENXIO.

To resolve this, look for the "iovcc" and "cvcc12" regulators, and
make sure they are enabled before starting the reset sequence. If
these supplies are not available in devicetree, then they will default
to dummy-regulator. In that case everything will work like before.

This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode.
On this board, the supplies would be set by the second stage
bootloader, which does not run in falcon mode.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[Fix checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-2-mr.nuke.me@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: display: sii902x: Add supply bindings

commit 4c1e054322da99cbfd293a5fddf283f2fdb3e2d0 upstream.

The sii902x chip family requires IO and core voltages to reach the
correct voltage before chip initialization. Add binding for describing
the two supplies.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-3-mr.nuke.me@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: sii902x: Refactor init code into separate function

commit 91b5e26731c5d409d6134603afc061617639933e upstream.

Separate the hardware initialization code from setting up the data
structures and parsing the device tree. The purpose of this change is
to provide a single exit point and avoid a waterfall of 'goto's in
the subsequent patch.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-1-mr.nuke.me@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/backlight: fix CPU mode backlight takeover on LPT

commit bb83d5fb550bb7db75b29e6342417fda2bbb691c upstream.

The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.

The CPU mode takeover code added in commit 5b1ec9ac7ab5
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".

This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.

Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com
(cherry picked from commit 0d4ced1c5bfe649196877d90442d4fd618e19153)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Limit VFE threads based on GT

commit ffaf97899c4a58b9fefb11534f730785443611a8 upstream.

MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the
range [0, n-1] where n is #EU * (#threads/EU) with the number of threads
based on plaform and the number of EU based on the number of slices and
subslices. This is a fixed number per platform/gt, so appropriately
limit the number of threads we spawn to match the device.

v2: Oversaturate the system with tasks to force execution on every HW
thread; if the thread idles it is returned to the pool and may be reused
again before an unused thread.

v3: Fix more state commands, which was causing Baytrail to barf.
v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Randy Wright <rwright@hpe.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk
(cherry picked from commit eebfb32e26851662d24ea86dd381fd0f83cd4b47)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Allow the sysadmin to override security mitigations

commit 984cadea032b103c5824a5f29d0a36b3e9df6333 upstream.

The clear-residuals mitigation is a relatively heavy hammer and under some
circumstances the user may wish to forgo the context isolation in order
to meet some performance requirement. Introduce a generic module
parameter to allow selectively enabling/disabling different mitigations.

To disable just the clear-residuals mitigation (on Ivybridge, Baytrail,
or Haswell) use the module parameter: i915.mitigations=auto,!residuals

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk
(cherry picked from commit f7452c7cbd5b5dfb9a6c84cb20bea04c89be50cd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add new device id for Renior

commit 53f1e7f6a1720f8299b5283857eedc8f07d29533 upstream.

add DID 0x164C into pciidlist under CHIP_RENOIR family.

Signed-off-by: mengwang <mengbing.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel"

commit 4eec66c014e9a406d8d453de958f6791d05427e4 upstream.

commit a861736dae64 ("drm/amd/display: Fixed Intermittent blue screen on OLED panel")

causes power regression for many users. It seems that this change causes
the MCLK to get forced high; this creates a regression for many users
since their devices were not able to drop to a low state after this
change. For this reason, this reverts commit
a861736dae644a0d7abbca0c638ae6aad28feeb8.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1407
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Naveed Ashfaq <Naveed.Ashfaq@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Roman Li <roman.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)

commit ff9346dbabbb6595c5c20d90d88ae4a2247487a9 upstream.

This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add green_sardine device id (v2)

commit 21702c8cae51535e09b91341a069503c6ef3d2a3 upstream.

Add green_sardine PCI id support and map it to renoir asic type.

v2: add apu flag

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hyperv: check cpu mask after interrupt has been disabled

commit ad0a6bad44758afa3b440c254a24999a0c7e35d5 upstream.

We've observed crashes due to an empty cpu mask in
hyperv_flush_tlb_others.  Obviously the cpu mask in question is changed
between the cpumask_empty call at the beginning of the function and when
it is actually used later.

One theory is that an interrupt comes in between and a code path ends up
changing the mask. Move the check after interrupt has been disabled to
see if it fixes the issue.

Signed-off-by: Wei Liu <wei.liu@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210105175043.28325-1-wei.liu@kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: remove widget from dirty list on free

commit 5c6679b5cb120f07652418524ab186ac47680b49 upstream.

A widget's "dirty" list_head, much like its "list" list_head, eventually
chains back to a list_head on the snd_soc_card itself. This means that
the list can stick around even after the widget (or all widgets) have
been freed. Currently, however, widgets that are in the dirty list when
freed remain there, corrupting the entire list and leading to memory
errors and undefined behavior when the list is next accessed or
modified.

I encountered this issue when a component failed to probe relatively
late in snd_soc_bind_card(), causing it to bail out and call
soc_cleanup_card_resources(), which eventually called
snd_soc_dapm_free() with widgets that were still dirty from when they'd
been added.

Fixes: db432b414e20 ("ASoC: Do DAPM power checks only for widgets changed since last run")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/f8b5f031d50122bf1a9bfc9cae046badf4a7a31a.1607822410.git.tommyhebb@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395

commit 1f092d1c8819679d78a7d9c62a46d4939d217a9d upstream.

The ThinkPad X395 latop does not have the internal digital
microphone connected to the AMD's ACP bridge, but it's advertised
via BIOS. The internal microphone is connected to the HDA codec.

Use DMI to block the microphone PCM device for this platform.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1892115
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201227164109.269973-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: doc: Fix reference to mixart.rst

commit 3e096a2112b7b407549020cf095e2a425f00fabb upstream.

MIXART.txt has been converted to ReST and renamed. Fix the reference
in alsa-configuration.rst.

Fixes: 3d8e81862ce4 ("ALSA: doc: ReSTize MIXART.txt")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210101221942.1068388-1-j.neuschaefer@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>