SUNRPC/xprtrdma: Fix reconnection locking

[ Upstream commit f99fa50880f5300fbbb3c0754ddc7f8738d24fe7 ]

The xprtrdma client code currently relies on the task that initiated the
connect to hold the XPRT_LOCK for the duration of the connection
attempt. If the task is woken early, due to some other event, then that
lock could get released early.
Avoid races by using the same mechanism that the socket code uses of
transferring lock ownership to the RDMA connect worker itself. That
frees us to call rpcrdma_xprt_disconnect() directly since we're now
guaranteed exclusion w.r.t. other callers.

Fixes: 4cf44be6f1e8 ("xprtrdma: Fix recursion into rpcrdma_xprt_disconnect()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix potential memory corruption

[ Upstream commit c2dc3e5fad13aca5d7bdf4bcb52b1a1d707c8555 ]

We really should not call rpc_wake_up_queued_task_set_status() with
xprt->snd_task as an argument unless we are certain that is actually an
rpc_task.

Fixes: 0445f92c5d53 ("SUNRPC: Fix disconnection races")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pnfs: The layout barrier indicate a minimal value for the seqid

[ Upstream commit d6236a98b3bab07c0a1455fd1ab46f79c3978cdc ]

The intention of the layout barrier is to ensure that we do not update
the layout to match an older value than the current expectation. Fix the
test in pnfs_layout_stateid_blocked() to reflect that it is legal for
the seqid of the stateid to match that of the barrier.

Fixes: aa95edf309ef ("NFSv4/pnfs: Fix the layout barrier update")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pNFS: Always allow update of a zero valued layout barrier

[ Upstream commit 45baadaad7bf9183651fb74f4ed1200da48505a5 ]

A zero value for the layout barrier indicates that it has been cleared
(since seqid '0' is an illegal value), so we should always allow it to
be updated.

Fixes: d29b468da4f9 ("pNFS/NFSv4: Improve rejection of out-of-order layouts")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pNFS: Fix a layoutget livelock loop

[ Upstream commit e20772cbdf463c12088837e5a08bde1b876bfd25 ]

If NFS_LAYOUT_RETURN_REQUESTED is set, but there is no value set for
the layout plh_return_seq, we can end up in a livelock loop in which
every layout segment retrieved by a new call to layoutget is immediately
invalidated by pnfs_layout_need_return().
To get around this, we should just set plh_return_seq to the current
value of the layout stateid's seqid.

Fixes: d474f96104bd ("NFS: Don't return layout segments that are in use")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-debug: fix debugfs initialization order

[ Upstream commit 173735c346c412d9f084825ecb04f24ada0e2986 ]

Due to link order, dma_debug_init is called before debugfs has a chance
to initialize (via debugfs_init which also happens in the core initcall
stage), so the directories for dma-debug are never created.

Decouple dma_debug_fs_init from dma_debug_init and defer its init until
core_initcall_sync (after debugfs has been initialized) while letting
dma-debug initialization occur as soon as possible to catch any early
mappings, as suggested in [1].

[1] https://lore.kernel.org/linux-iommu/YIgGa6yF%2Fadg8OSN@kroah.com/

Fixes: 15b28bbcd567 ("dma-debug: move initialization to common code")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openrisc: don't printk() unconditionally

[ Upstream commit 946e1052cdcc7e585ee5d1e72528ca49fb295243 ]

Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:

or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: reduce the scope of setting fsck tag when de->name_len is zero

[ Upstream commit d4bf15a7ce172d186d400d606adf4f34a59130d6 ]

I recently found a case where de->name_len is 0 in f2fs_fill_dentries()
easily reproduced, and finally set the fsck flag.

Thread A Thread B
- f2fs_readdir
 - f2fs_read_inline_dir
  - ctx->pos = d.max
- f2fs_add_dentry
 - f2fs_add_inline_entry
  - do_convert_inline_dir
 - f2fs_add_regular_entry
- f2fs_readdir
 - f2fs_fill_dentries
  - set_sbi_flag(sbi, SBI_NEED_FSCK)

Process A opens the folder, and has been reading without closing it.
During this period, Process B created a file under the folder (occupying
multiple f2fs_dir_entry, exceeding the d.max of the inline dir). After
creation, process A uses the d.max of inline dir to read it again, and
it will read that de->name_len is 0.

And Chao pointed out that w/o inline conversion, the race condition still
can happen as below:

dir_entry1: A
dir_entry2: B
dir_entry3: C
free slot: _
ctx->pos: ^

Thread A is traversing directory,
ctx-pos moves to below position after readdir() by thread A:
AAAABBBB___
        ^

Then thread B delete dir_entry2, and create dir_entry3.

Thread A calls readdir() to lookup dirents starting from middle
of new dirent slots as below:
AAAACCCCCC_
        ^
In these scenarios, the file system is not damaged, and it's hard to
avoid it. But we can bypass tagging FSCK flag if:
a) bit_pos (:= ctx->pos % d->max) is non-zero and
b) before bit_pos moves to first valid dir_entry.

Fixes: ddf06b753a85 ("f2fs: fix to trigger fsck if dirent.name_len is zero")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
[Chao: clean up description]
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: pseries: Mark pseries_idle_proble() as __init

[ Upstream commit d04691d373e75c83424b85c0e68e4a3f9370c10d ]

After commit 7cbd631d4dec ("cpuidle: pseries: Fixup CEDE0 latency only
for POWER10 onwards"), pseries_idle_probe() is no longer inlined when
compiling with clang, which causes a modpost warning:

WARNING: modpost: vmlinux.o(.text+0xc86a54): Section mismatch in
reference from the function pseries_idle_probe() to the function
.init.text:fixup_cede0_latency()
The function pseries_idle_probe() references
the function __init fixup_cede0_latency().
This is often because pseries_idle_probe lacks a __init
annotation or the annotation of fixup_cede0_latency is wrong.

pseries_idle_probe() is a non-init function, which calls
fixup_cede0_latency(), which is an init function, explaining the
mismatch. pseries_idle_probe() is only called from
pseries_processor_idle_init(), which is an init function, so mark
pseries_idle_probe() as __init so there is no more warning.

Fixes: 054e44ba99ae ("cpuidle: pseries: Add function to parse extended CEDE records")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210803211547.1093820-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Delete not-available udata check

[ Upstream commit 5f6bb7e32283b8e3339b7adc00638234ac199cc4 ]

XRC_TGT QPs are created through kernel verbs and don't have udata at all.

Fixes: 6eefa839c4dd ("RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata")
Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create")
Link: https://lore.kernel.org/r/b68228597e730675020aa5162745390a2d39d3a2.1628014762.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/efa: Remove double QP type assignment

[ Upstream commit f9193d266347fe9bed5c173e7a1bf96268142a79 ]

The QP type is set by the IB/core and shouldn't be set in the driver.

Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/838c40134c1590167b888ca06ad51071139ff2ae.1627040189.git.leonro@nvidia.com
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/stacktrace: Include linux/delay.h

[ Upstream commit a6cae77f1bc89368a4e2822afcddc45c3062d499 ]

commit 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()")
introduces udelay() call without including the linux/delay.h header.
This may happen to work on master but the header that declares the
functionshould be included nonetheless.

Fixes: 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729180103.15578-1-msuchanek@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwards

[ Upstream commit 50741b70b0cbbafbd9199f5180e66c0c53783a4a ]

Commit d947fb4c965c ("cpuidle: pseries: Fixup exit latency for
CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
of the Extended CEDE states advertised by the platform

On POWER9 LPARs, the firmwares advertise a very low value of 2us for
CEDE1 exit latency on a Dedicated LPAR. The latency advertized by the
PHYP hypervisor corresponds to the latency required to wakeup from the
underlying hardware idle state. However the wakeup latency from the
LPAR perspective should include

1. The time taken to transition the CPU from the Hypervisor into the
   LPAR post wakeup from platform idle state

2. Time taken to send the IPI from the source CPU (waker) to the idle
   target CPU (wakee).

1. can be measured via timer idle test, where we queue a timer, say
for 1ms, and enter the CEDE state. When the timer fires, in the timer
handler we compute how much extra timer over the expected 1ms have we
consumed. On a a POWER9 LPAR the numbers are

CEDE latency measured using a timer (numbers in ns)
N       Min      Median   Avg       90%ile  99%ile    Max    Stddev
400     2601     5677     5668.74    5917    6413     9299   455.01

1. and 2. combined can be determined by an IPI latency test where we
send an IPI to an idle CPU and in the handler compute the time
difference between when the IPI was sent and when the handler ran. We
see the following numbers on POWER9 LPAR.

CEDE latency measured using an IPI (numbers in ns)
N       Min      Median   Avg       90%ile  99%ile    Max    Stddev
400     711      7564     7369.43   8559    9514      9698   1200.01

Suppose, we consider the 99th percentile latency value measured using
the IPI to be the wakeup latency, the value would be 9.5us This is in
the ballpark of the default value of 10us.

Hence, use the exit latency of CEDE(0) based on the latency values
advertized by platform only from POWER10 onwards. The values
advertized on POWER10 platforms is more realistic and informed by the
latency measurements. For earlier platforms stick to the default value
of 10us. The fix was suggested by Michael Ellerman.

Fixes: d947fb4c965c ("cpuidle: pseries: Fixup exit latency for CEDE(0)")
Reported-by: Enrico Joedecke <joedecke@de.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626676399-15975-2-git-send-email-ego@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix memory corruption by ufshcd_read_desc_param()

[ Upstream commit d3d9c4570285090b533b00946b72647361f0345b ]

If param_offset > buff_len then the memcpy() statement in
ufshcd_read_desc_param() corrupts memory since it copies 256 + buff_len -
param_offset bytes into a buffer with size buff_len.  Since param_offset <
256 this results in writing past the bound of the output buffer.

Link: https://lore.kernel.org/r/20210722033439.26550-2-bvanassche@acm.org
Fixes: cbe193f6f093 ("scsi: ufs: Fix potential NULL pointer access during memcpy")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio: Use config not menuconfig for VFIO_NOIOMMU

[ Upstream commit 26c22cfde5dd6e63f25c48458b0185dcb0fbb2fd ]

VFIO_NOIOMMU is supposed to be an element in the VFIO menu, not start
a new menu. Correct this copy-paste mistake.

Fixes: 03a76b60f8ba ("vfio: Include No-IOMMU mode")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/0-v1-3f0b685c3679+478-vfio_menuconfig_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: samsung: Fix pinctrl bank pin count

[ Upstream commit 70115558ab02fe8d28a6634350b3491a542aaa02 ]

Commit 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO")
changes the order of GPIO and pinctrl registration: now pinctrl is
registered before GPIO. That means gpio_chip->ngpio is not set when
samsung_pinctrl_register() called, and one cannot rely on that value
anymore. Use `pin_bank->nr_pins' instead of `pin_bank->gpio_chip.ngpio'
to fix mentioned inconsistency.

Fixes: 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO")
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20210730192905.7173-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: BusLogic: Use %X for u32 sized integer rather than %lX

[ Upstream commit 2127cd21fb78c6e22d92944253afd967b0ff774d ]

An earlier fix changed the print format specifier for adapter->bios_addr to
use %lX. However, the integer is a u32 so the fix was wrong. Fix this by
using the correct %X format specifier.

Link: https://lore.kernel.org/r/20210730095031.26981-1-colin.king@canonical.com
Fixes: 43622697117c ("scsi: BusLogic: use %lX for unsigned long rather than %X")
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Invalid type in argument")
Signed-off-by: Sasha Levin <sashal@kernel.org>

docs: Fix infiniband uverbs minor number

[ Upstream commit 8d7e415d55610d503fdb8815344846b72d194a40 ]

Starting from the beginning of infiniband subsystem, the uverbs char
devices start from 192 as a minor number, see
commit bc38a6abdd5a ("[PATCH] IB uverbs: core implementation").

This patch updates the admin guide documentation to reflect it.

Fixes: 9d85025b0418 ("docs-rst: create an user's manual book")
Link: https://lore.kernel.org/r/bad03e6bcde45550c01e12908a6fe7dfa4770703.1627477347.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/iwcm: Release resources if iw_cm module initialization fails

[ Upstream commit e677b72a0647249370f2635862bf0241c86f66ad ]

The failure during iw_cm module initialization partially left the system
with unreleased memory and other resources. Rewrite the module init/exit
routines in such way that netlink commands will be opened only after
successful initialization.

Fixes: b493d91d333e ("iwcm: common code for port mapper")
Link: https://lore.kernel.org/r/b01239f99cb1a3e6d2b0694c242d89e6410bcd93.1627048781.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Adjust pkey entry in index 0

[ Upstream commit 62004871e1fa7f9a60797595c03477af5b5ec36f ]

It is possible for the primary IPoIB network device associated with any
RDMA device to fail to join certain multicast groups preventing IPv6
neighbor discovery and possibly other network ULPs from working
correctly. The IPv4 broadcast group is not affected as the IPoIB network
device handles joining that multicast group directly.

This is because the primary IPoIB network device uses the pkey at ndex 0
in the associated RDMA device's pkey table. Anytime the pkey value of
index 0 changes, the primary IPoIB network device automatically modifies
it's broadcast address (i.e. /sys/class/net/[ib0]/broadcast), since the
broadcast address includes the pkey value, and then bounces carrier. This
includes initial pkey assignment, such as when the pkey at index 0
transitions from the opa default of invalid (0x0000) to some value such as
the OPA default pkey for Virtual Fabric 0: 0x8001 or when the fabric
manager is restarted with a configuration change causing the pkey at index
0 to change. Many network ULPs are not sensitive to the carrier bounce and
are not expecting the broadcast address to change including the linux IPv6
stack.  This problem does not affect IPoIB child network devices as their
pkey value is constant for all time.

To mitigate this issue, change the default pkey in at index 0 to 0x8001 to
cover the predominant case and avoid issues as ipoib comes up and the FM
sweeps.

At some point, ipoib multicast support should automatically fix
non-broadcast addresses as it does with the primary broadcast address.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210715160445.142451.47651.stgit@awfm-01.cornelisnetworks.com
Suggested-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types

[ Upstream commit 6fffe52fb336ec2063270a7305652a93ea677ca1 ]

The rk3036/rk3328 pll types were converted to checking the lock status
via the internal register in january 2020, so don't need the grf
reference since then.

But it was forgotten to remove grf check when deciding between the
pll rate ops (read-only vs. read-write), so a clock driver without
the needed grf reference might've been put into the read-only mode
just because the grf reference was missing.

This affected the rk356x that needs to reclock certain plls at boot.

Fix this by removing the check for the grf for selecting the utilized
operations.

Suggested-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 7f6ffbb885d1 ("clk: rockchip: convert rk3036 pll type to use internal lock status")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
[adjusted the commit message, adjusted the fixes tag]
Link: https://lore.kernel.org/r/20210728180034.717953-3-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: bsg: Remove support for SCSI_IOCTL_SEND_COMMAND

[ Upstream commit beec64d0c9749afedf51c3c10cf52de1d9a89cc0 ]

SCSI_IOCTL_SEND_COMMAND has been deprecated longer than bsg exists and has
been warning for just as long.  More importantly it harcodes SCSI CDBs and
thus will do the wrong thing on non-SCSI bsg nodes.

Link: https://lore.kernel.org/r/20210724072033.1284840-2-hch@lst.de
Fixes: aa387cc89567 ("block: add bsg helper library")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: armada-37xx: Correct PWM pins definitions

[ Upstream commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 ]

The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).

The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"

This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".

Change the "pwmN" groups to support "led" function.

Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.

Fixes: b835d6953009 ("pinctrl: armada-37xx: swap polarity on LED group")
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: remove empty lines in pinctrl subsystem

[ Upstream commit 43878eb7c83d3335af7737dcce1fa79071065dfe ]

Remove all empty lines at the end of functions in pinctrl subsystem,
and make the code neat.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Zhaoyu Liu <zackaryliu@yeah.net>
Link: https://lore.kernel.org/r/X98NP6NFK1Afzrgd@manjaro
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: quota: fix potential deadlock

[ Upstream commit 9de71ede81e6d1a111fdd868b2d78d459fa77f80 ]

xfstest generic/587 reports a deadlock issue as below:

======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc1 #69 Not tainted
------------------------------------------------------
repquota/8606 is trying to acquire lock:
ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs]

but task is already holding lock:
ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&sbi->quota_sem){.+.+}-{3:3}:
       __lock_acquire+0x648/0x10b0
       lock_acquire+0x128/0x470
       down_read+0x3b/0x2a0
       f2fs_quota_sync+0x59/0x300 [f2fs]
       f2fs_quota_on+0x48/0x100 [f2fs]
       do_quotactl+0x5e3/0xb30
       __x64_sys_quotactl+0x23a/0x4e0
       do_syscall_64+0x3b/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #1 (&sbi->cp_rwsem){++++}-{3:3}:
       __lock_acquire+0x648/0x10b0
       lock_acquire+0x128/0x470
       down_read+0x3b/0x2a0
       f2fs_unlink+0x353/0x670 [f2fs]
       vfs_unlink+0x1c7/0x380
       do_unlinkat+0x413/0x4b0
       __x64_sys_unlinkat+0x50/0xb0
       do_syscall_64+0x3b/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}:
       check_prev_add+0xdc/0xb30
       validate_chain+0xa67/0xb20
       __lock_acquire+0x648/0x10b0
       lock_acquire+0x128/0x470
       down_write+0x39/0xc0
       f2fs_quota_sync+0x207/0x300 [f2fs]
       do_quotactl+0xaff/0xb30
       __x64_sys_quotactl+0x23a/0x4e0
       do_syscall_64+0x3b/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

other info that might help us debug this:

Chain exists of:
  &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sbi->quota_sem);
                               lock(&sbi->cp_rwsem);
                               lock(&sbi->quota_sem);
  lock(&sb->s_type->i_mutex_key#18);

 *** DEADLOCK ***

3 locks held by repquota/8606:
 #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190
 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs]
 #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs]

stack backtrace:
CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
 dump_stack_lvl+0xce/0x134
 dump_stack+0x17/0x20
 print_circular_bug.isra.0.cold+0x239/0x253
 check_noncircular+0x1be/0x1f0
 check_prev_add+0xdc/0xb30
 validate_chain+0xa67/0xb20
 __lock_acquire+0x648/0x10b0
 lock_acquire+0x128/0x470
 down_write+0x39/0xc0
 f2fs_quota_sync+0x207/0x300 [f2fs]
 do_quotactl+0xaff/0xb30
 __x64_sys_quotactl+0x23a/0x4e0
 do_syscall_64+0x3b/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f883b0b4efe

The root cause is ABBA deadlock of inode lock and cp_rwsem,
reorder locks in f2fs_quota_sync() as below to fix this issue:
- lock inode
- lock cp_rwsem
- lock quota_sem

Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: input: do not report stylus battery state as "full"

[ Upstream commit f4abaa9eebde334045ed6ac4e564d050f1df3013 ]

The power supply states of discharging, charging, full, etc, represent
state of charging, not the capacity level of the battery (for which
we have a separate property). Current HID usage tables to not allow
for expressing charging state of the batteries found in generic
styli, so we should simply assume that the battery is discharging
even if current capacity is at 100% when battery strength reporting
is done via HID interface. In fact, we were doing just that before
commit 581c4484769e.

This change helps UIs to not mis-represent fully charged batteries in
styli as being charging/topping-off.

Fixes: 581c4484769e ("HID: input: map digitizer battery usage")
Reported-by: Kenneth Albanowski <kenalba@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Fix masking and unmasking legacy INTx interrupts

commit d212dcee27c1f89517181047e5485fcbba4a25c2 upstream.

irq_mask and irq_unmask callbacks need to be properly guarded by raw spin
locks as masking/unmasking procedure needs atomic read-modify-write
operation on hardware register.

Link: https://lore.kernel.org/r/20210820155020.3000-1-pali@kernel.org
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Fix checking for PIO status

commit fcb461e2bc8b83b7eaca20cb2221e8b940f2189c upstream.

There is an issue that when PCIe switch is connected to an Armada 3700
board, there will be lots of warnings about PIO errors when reading the
config space. According to Aardvark PIO read and write sequence in HW
specification, the current way to check PIO status has the following
issues:

1) For PIO read operation, it reports the error message, which should be
   avoided according to HW specification.

2) For PIO read and write operations, it only checks PIO operation complete
   status, which is not enough, and error status should also be checked.

This patch aligns the code with Aardvark PIO read and write sequence in HW
specification on PIO status check and fix the warnings when reading config
space.

[pali: Fix CRS handling when CRSSVE is not enabled]

Link: https://lore.kernel.org/r/20210722144041.12661-2-pali@kernel.org
Tested-by: Victor Gu <xigu@marvell.com>
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # b1bd5714472c ("PCI: aardvark: Indicate error in 'val' when config read fails")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Export pci_pio_to_address() for module use

commit 9cc742078c9a90cdd4cf131e9f760e6965df9048 upstream.

This interface will be used by PCI host drivers for PIO translation,
export it to support compiling those drivers as kernel modules.

Link: https://lore.kernel.org/r/20210420061723.989-3-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Configure PCIe resources from 'ranges' DT property

commit 64f160e19e9264a7f6d89c516baae1473b6f8359 upstream.

In commit 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window
configuration") was removed aardvark PCIe outbound window configuration and
commit description said that was recommended solution by HW designers.

But that commit completely removed support for configuring PCIe IO
resources without removing PCIe IO 'ranges' from DTS files. After that
commit PCIe IO space started to be treated as PCIe MEM space and accessing
it just caused kernel crash.

Moreover implementation of PCIe outbound windows prior that commit was
incorrect. It completely ignored offset between CPU address and PCIe bus
address and expected that in DTS is CPU address always same as PCIe bus
address without doing any checks. Also it completely ignored size of every
PCIe resource specified in 'ranges' DTS property and expected that every
PCIe resource has size 128 MB (also for PCIe IO range). Again without any
check. Apparently none of PCIe resource has in DTS specified size of 128
MB. So it was completely broken and thanks to how aardvark mask works,
configuration was completely ignored.

This patch reverts back support for PCIe outbound window configuration but
implementation is a new without issues mentioned above. PCIe outbound
window is required when DTS specify in 'ranges' property non-zero offset
between CPU and PCIe address space. To address recommendation by HW
designers as specified in commit description of 6df6ba974a55, set default
outbound parameters as PCIe MEM access without translation and therefore
for this PCIe 'ranges' it is not needed to configure PCIe outbound window.
For PCIe IO space is needed to configure aardvark PCIe outbound window.

This patch fixes kernel crash when trying to access PCIe IO space.

Link: https://lore.kernel.org/r/20210624215546.4015-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: xilinx-nwl: Enable the clock through CCF

commit de0a01f5296651d3a539f2d23d0db8f359483696 upstream.

Enable PCIe reference clock. There is no remove function that's why
this should be enough for simple operation.
Normally this clock is enabled by default by firmware but there are
usecases where this clock should be enabled by driver itself.
It is also good that PCIe clock is recorded in a clock framework.

Link: https://lore.kernel.org/r/ee6997a08fab582b1c6de05f8be184f3fe8d5357.1624618100.git.michal.simek@xilinx.com
Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure

commit a8bd29bd49c4156ea0ec5a97812333e2aeef44e7 upstream.

The pciconfig_read() syscall reads PCI configuration space using
hardware-dependent config accessors.

If the read fails on PCI, most accessors don't return an error; they
pretend the read was successful and got ~0 data from the device, so the
syscall returns success with ~0 data in the buffer.

When the accessor does return an error, pciconfig_read() normally fills the
user's buffer with ~0 and returns an error in errno.  But after
e4585da22ad0 ("pci syscall.c: Switch to refcounting API"), we don't fill
the buffer with ~0 for the EPERM "user lacks CAP_SYS_ADMIN" error.

Userspace may rely on the ~0 data to detect errors, but after e4585da22ad0,
that would not detect CAP_SYS_ADMIN errors.

Restore the original behaviour of filling the buffer with ~0 when the
CAP_SYS_ADMIN check fails.

[bhelgaas: commit log, fold in Nathan's fix
https://lore.kernel.org/r/20210803200836.500658-1-nathan@kernel.org]
Fixes: e4585da22ad0 ("pci syscall.c: Switch to refcounting API")
Link: https://lore.kernel.org/r/20210729233755.1509616-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported

commit b12d93e9958e028856cbcb061b6e64728ca07755 upstream.

The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported
of 512, but in fact it cannot handle incoming TLPs with payload size of
512.

We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark
and DesignWare), where the issue presents itself as an External Abort.
Bjorn Helgaas says:

  Probably ASM1062 reports a Malformed TLP error when it receives a data
  payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an
  arm64 External Abort. [1]

To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256
bytes, so we set the Max Payload Size of devices that may send TLPs to the
ASM1062 to 256 or less.

[1] https://lore.kernel.org/linux-pci/20210601170907.GA1949035@bjorn-Precision-5520/
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212695
Link: https://lore.kernel.org/r/20210624171418.27194-2-kabel@kernel.org
Reported-by: Rötti <espressobinboardarmbiantempmailaddress@posteo.de>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/portdrv: Enable Bandwidth Notification only if port supports it

commit 00823dcbdd415c868390feaca16f0265101efab4 upstream.

Previously we assumed that all Root Ports and Switch Downstream Ports
supported Link Bandwidth Notification.  Per spec, this is only required
for Ports supporting Links wider than x1 and/or multiple Link speeds
(PCIe r5.0, sec 7.5.3.6).

Because we assumed all Ports supported it, we tried to set up a Bandwidth
Notification IRQ, which failed for devices that don't support IRQs at all,
which meant pcieport didn't attach to the Port at all.

Check the Link Bandwidth Notification Capability bit and enable the service
only when the Port supports it.

[bhelgaas: commit log]
Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification")
Link: https://lore.kernel.org/r/20210512213314.7778-1-stuart.w.hayes@gmail.com
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check for sb/cp fields correctly

commit 65ddf6564843890a58ee3b18bb46ce67d96333fb upstream.

This patch fixes below problems of sb/cp sanity check:
- in sanity_check_raw_superi(), it missed to consider log header
blocks while cp_payload check.
- in f2fs_sanity_check_ckpt(), it missed to check nat_bits_blocks.

Cc: <stable@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9105/1: atags_to_fdt: don't warn about stack size

commit b30d0289de72c62516df03fdad8d53f552c69839 upstream.

The merge_fdt_bootargs() function by definition consumes more than 1024
bytes of stack because it has a 1024 byte command line on the stack,
meaning that we always get a warning when building this file:

arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs':
arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]

However, as this is the decompressor and we know that it has a very shallow
call chain, and we do not actually risk overflowing the kernel stack
at runtime here.

This just shuts up the warning by disabling the warning flag for this
file.

Tested on Nexus 7 2012 builds.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs

commit 8a6430ab9c9c87cb64c512e505e8690bbaee190b upstream.

Commit ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.

But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.

Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.

Fixes: ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475
Cc: stable@vger.kernel.org
Cc: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: imx-sdma: remove duplicated sdma_load_context

commit e555a03b112838883fdd8185d613c35d043732f2 upstream.

Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "dmaengine: imx-sdma: refine to load context only once"

commit 8592f02464d52776c5cfae4627c6413b0ae7602d upstream.

This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.

Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qdio: cancel the ESTABLISH ccw after timeout

commit 1c1dc8bda3a05c60877a6649775894db5343bdea upstream.

When the ESTABLISH ccw does not complete within the specified timeout,
try our best to cancel the ccw program that is still active on the
device. Otherwise the IO subsystem might be accessing it even after
the driver eg. called qdio_free().

Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qdio: fix roll-back after timeout on ESTABLISH ccw

commit 2c197870e4701610ec3b1143808d4e31152caf30 upstream.

When qdio_establish() times out while waiting for the ESTABLISH ccw to
complete, it calls qdio_shutdown() to roll back all of its previous
actions. But at this point the qdio_irq's state is still
QDIO_IRQ_STATE_INACTIVE, so qdio_shutdown() will exit immediately
without doing any actual work.

Which means that eg. the qdio_irq's thinint-indicator stays registered,
and cdev->handler isn't restored to its old value. And since
commit 954d6235be41 ("s390/qdio: make thinint registration symmetric")
the qdio_irq also stays on the tiq_list, so on the next qdio_establish()
we might get a helpful BUG from the list-debugging code:

...
[ 4633.512591] list_add double add: new=00000000005a4110, prev=00000001b357db78, next=00000000005a4110.
[ 4633.512621] ------------[ cut here ]------------
[ 4633.512623] kernel BUG at lib/list_debug.c:29!
...
[ 4633.512796]  [<00000001b2c6ee9a>] __list_add_valid+0x82/0xa0
[ 4633.512798] ([<00000001b2c6ee96>] __list_add_valid+0x7e/0xa0)
[ 4633.512800]  [<00000001b2fcecce>] qdio_establish_thinint+0x116/0x190
[ 4633.512805]  [<00000001b2fcbe58>] qdio_establish+0x128/0x498
...

Fix this by extracting a goto-chain from the existing error exits in
qdio_establish(), and check the return value of the wait_event_...()
to detect the timeout condition.

Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Root-caused-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rc-loopback: return number of emitters rather than error

commit 6b7f554be8c92319d7e6df92fd247ebb9beb4a45 upstream.

The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters
if an invalid list was set.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: uvc: don't do DMA on stack

commit 1a10d7fdb6d0e235e9d230916244cc2769d3f170 upstream.

As warned by smatch:
drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i)
drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i)

those two functions call uvc_query_ctrl passing a pointer to
a data at the DMA stack. those are used to send URBs via
usb_control_msg(). Using DMA stack is not supported and should
not work anymore on modern Linux versions.

So, use a kmalloc'ed buffer.

Cc: stable@vger.kernel.org # Kernel 4.9 and upper
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: fix NULL pointer dereference when unmapping queue pair

commit a30dc6cf0dc51419021550152e435736aaef8799 upstream.

I got a NULL pointer dereference report when doing fuzz test:

Call Trace:
  qp_release_pages+0xae/0x130
  qp_host_unregister_user_memory.isra.25+0x2d/0x80
  vmci_qp_broker_unmap+0x191/0x320
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  vmci_host_unlocked_ioctl+0x59f/0xd50
  ? do_vfs_ioctl+0x14b/0xa10
  ? tomoyo_file_ioctl+0x28/0x30
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  __x64_sys_ioctl+0xea/0x120
  do_syscall_64+0x34/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.

vmci_host_unlocked_ioctl
  vmci_host_do_alloc_queuepair
    vmci_qp_broker_alloc
      qp_broker_alloc
        qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;

When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.

Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.

Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.

Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - shutdown SEV firmware on kexec

commit 5441a07a127f106c9936e4f9fa1a8a93e3f31828 upstream.

The commit 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the
PSP driver") added support to allocate Trusted Memory Region (TMR)
used during the SEV-ES firmware initialization. The TMR gets locked
during the firmware initialization and unlocked during the shutdown.
While the TMR is locked, access to it is disallowed.

Currently, the CCP driver does not shutdown the firmware during the
kexec reboot, leaving the TMR memory locked.

Register a callback to shutdown the SEV firmware on the kexec boot.

Fixes: 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Reported-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Tested-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Cc: <stable@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()

commit 528b16bfc3ae5f11638e71b3b63a81f9999df727 upstream.

On systems with many cores using dm-crypt, heavy spinlock contention in
percpu_counter_compare() can be observed when the page allocation limit
for a given device is reached or close to be reached. This is due
to percpu_counter_compare() taking a spinlock to compute an exact
result on potentially many CPUs at the same time.

Switch to non-exact comparison of allocated and allowed pages by using
the value returned by percpu_counter_read_positive() to avoid taking
the percpu_counter spinlock.

This may over/under estimate the actual number of allocated pages by at
most (batch-1) * num_online_cpus().

Currently, batch is bounded by 32. The system on which this issue was
first observed has 256 CPUs and 512GB of RAM. With a 4k page size, this
change may over/under estimate by 31MB. With ~10G (2%) allowed dm-crypt
allocations, this seems an acceptable error. Certainly preferred over
running into the spinlock contention.

This behavior was reproduced on an EC2 c5.24xlarge instance with 96 CPUs
and 192GB RAM as follows, but can be provoked on systems with less CPUs
as well.

 * Disable swap
 * Tune vm settings to promote regular writeback
     $ echo 50 > /proc/sys/vm/dirty_expire_centisecs
     $ echo 25 > /proc/sys/vm/dirty_writeback_centisecs
     $ echo $((128 * 1024 * 1024)) > /proc/sys/vm/dirty_background_bytes

 * Create 8 dmcrypt devices based on files on a tmpfs
 * Create and mount an ext4 filesystem on each crypt devices
 * Run stress-ng --hdd 8 within one of above filesystems

Total %system usage collected from sysstat goes to ~35%. Write throughput
on the underlying loop device is ~2GB/s. perf profiling an individual
kworker kcryptd thread shows the following profile, indicating spinlock
contention in percpu_counter_compare():

    99.98%     0.00%  kworker/u193:46  [kernel.kallsyms]  [k] ret_from_fork
      |
      --ret_from_fork
        kthread
        worker_thread
        |
         --99.92%--process_one_work
            |
            |--80.52%--kcryptd_crypt
            |    |
            |    |--62.58%--mempool_alloc
            |    |  |
            |    |   --62.24%--crypt_page_alloc
            |    |     |
            |    |      --61.51%--__percpu_counter_compare
            |    |        |
            |    |         --61.34%--__percpu_counter_sum
            |    |           |
            |    |           |--58.68%--_raw_spin_lock_irqsave
            |    |           |  |
            |    |           |   --58.30%--native_queued_spin_lock_slowpath
            |    |           |
            |    |            --0.69%--cpumask_next
            |    |                |
            |    |                 --0.51%--_find_next_bit
            |    |
            |    |--10.61%--crypt_convert
            |    |          |
            |    |          |--6.05%--xts_crypt
            ...

After applying this patch and running the same test, %system usage is
lowered to ~7% and write throughput on the loop device increases
to ~2.7GB/s. perf report shows mempool_alloc() as ~8% rather than ~62%
in the profile and not hitting the percpu_counter() spinlock anymore.

    |--8.15%--mempool_alloc
    |    |
    |    |--3.93%--crypt_page_alloc
    |    |    |
    |    |     --3.75%--__alloc_pages
    |    |         |
    |    |          --3.62%--get_page_from_freelist
    |    |              |
    |    |               --3.22%--rmqueue_bulk
    |    |                   |
    |    |                    --2.59%--_raw_spin_lock
    |    |                      |
    |    |                       --2.57%--native_queued_spin_lock_slowpath
    |    |
    |     --3.05%--_raw_spin_lock_irqsave
    |               |
    |                --2.49%--native_queued_spin_lock_slowpath

Suggested-by: DJ Gregor <dj@corelight.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Arne Welzel <arne.welzel@corelight.com>
Fixes: 5059353df86e ("dm crypt: limit the number of allocated pages")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: max17042: handle fails of reading status register

commit 54784ffa5b267f57161eb8fbb811499f22a0a0bf upstream.

Reading status register can fail in the interrupt handler.  In such
case, the regmap_read() will not store anything useful under passed
'val' variable and random stack value will be used to determine type of
interrupt.

Handle the regmap_read() failure to avoid handling interrupt type and
triggering changed power supply event based on random stack value.

Fixes: 39e7213edc4f ("max17042_battery: Support regmap to access device's registers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: bfq: fix bfq_set_next_ioprio_data()

commit a680dd72ec336b81511e3bff48efac6dbfa563e7 upstream.

For a request that has a priority level equal to or larger than
IOPRIO_BE_NR, bfq_set_next_ioprio_data() prints a critical warning but
defaults to setting the request new_ioprio field to IOPRIO_BE_NR. This
is not consistent with the warning and the allowed values for priority
levels. Fix this by setting the request new_ioprio field to
IOPRIO_BE_NR - 1, the lowest priority level allowed.

Cc: <stable@vger.kernel.org>
Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210811033702.368488-2-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: public_key: fix overflow during implicit conversion

commit f985911b7bc75d5c98ed24d8aaa8b94c590f7c6a upstream.

Hit kernel warning like this, it can be reproduced by verifying 256
bytes datafile by keyctl command, run script:
RAWDATA=rawdata
SIGDATA=sigdata

modprobe pkcs8_key_parser

rm -rf *.der *.pem *.pfx
rm -rf $RAWDATA
dd if=/dev/random of=$RAWDATA bs=256 count=1

openssl req -nodes -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem \
  -subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=xx.com/emailAddress=yy@xx.com"

KEY_ID=`openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER | keyctl \
  padd asymmetric 123 @s`

keyctl pkey_sign $KEY_ID 0 $RAWDATA enc=pkcs1 hash=sha1 > $SIGDATA
keyctl pkey_verify $KEY_ID 0 $RAWDATA $SIGDATA enc=pkcs1 hash=sha1

Then the kernel reports:
 WARNING: CPU: 5 PID: 344556 at crypto/rsa-pkcs1pad.c:540
   pkcs1pad_verify+0x160/0x190
 ...
 Call Trace:
  public_key_verify_signature+0x282/0x380
  ? software_key_query+0x12d/0x180
  ? keyctl_pkey_params_get+0xd6/0x130
  asymmetric_key_verify_signature+0x66/0x80
  keyctl_pkey_verify+0xa5/0x100
  do_syscall_64+0x35/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

The reason of this issue, in function 'asymmetric_key_verify_signature':
'.digest_size(u8) = params->in_len(u32)' leads overflow of an u8 value,
so use u32 instead of u8 for digest_size field. And reorder struct
public_key_signature, it saves 8 bytes on a 64-bit machine.

Cc: stable@vger.kernel.org
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wcn36xx: Ensure finish scan is not requested before start scan

commit d195d7aac09bddabc2c8326fb02fcec2b0a2de02 upstream.

If the operating channel is the first in the scan list, it was seen that
a finish scan request would be sent before a start scan request was
sent, causing the firmware to fail all future scans. Track the current
channel being scanned to avoid requesting the scan finish before it
starts.

Cc: <stable@vger.kernel.org>
Fixes: 5973a2947430 ("wcn36xx: Fix software-driven scan")
Signed-off-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629286303-13179-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ltc2983: fix device probe

commit b76d26d69ecc97ebb24aaf40427a13c808a4f488 upstream.

There is no reason to assume that the IRQ rising edge (indicating that
the device start up phase is done) will happen after we request the IRQ.
If the device is already up by the time we request it, the call to
'wait_for_completion_timeout()' will timeout and we will fail the device
probe even though there's nothing wrong.

Fix it by just polling the status register until we get the indication that
the device is up and running. As a side effect of this fix, requesting the
IRQ is also moved to after the setup function.

Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983")
Reported-and-tested-by: Drew Fustini <drew@pdp7.com>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210811133220.190264-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: head: avoid over-mapping in map_memory

commit 90268574a3e8a6b883bd802d702a2738577e1006 upstream.

The `compute_indices` and `populate_entries` macros operate on inclusive
bounds, and thus the `map_memory` macro which uses them also operates
on inclusive bounds.

We pass `_end` and `_idmap_text_end` to `map_memory`, but these are
exclusive bounds, and if one of these is sufficiently aligned (as a
result of kernel configuration, physical placement, and KASLR), then:

* In `compute_indices`, the computed `iend` will be in the page/block *after*
  the final byte of the intended mapping.

* In `populate_entries`, an unnecessary entry will be created at the end
  of each level of table. At the leaf level, this entry will map up to
  SWAPPER_BLOCK_SIZE bytes of physical addresses that we did not intend
  to map.

As we may map up to SWAPPER_BLOCK_SIZE bytes more than intended, we may
violate the boot protocol and map physical address past the 2MiB-aligned
end address we are permitted to map. As we map these with Normal memory
attributes, this may result in further problems depending on what these
physical addresses correspond to.

The final entry at each level may require an additional table at that
level. As EARLY_ENTRIES() calculates an inclusive bound, we allocate
enough memory for this.

Avoid the extraneous mapping by having map_memory convert the exclusive
end address to an inclusive end address by subtracting one, and do
likewise in EARLY_ENTRIES() when calculating the number of required
tables. For clarity, comments are updated to more clearly document which
boundaries the macros operate on.  For consistency with the other
macros, the comments in map_memory are also updated to describe `vstart`
and `vend` as virtual addresses.

Fixes: 0370b31e4845 ("arm64: Extend early page table code to allow for larger kernels")
Cc: <stable@vger.kernel.org> # 4.16.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210823101253.55567-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Fix TLBI vs ASID rollover

commit 5e10f9887ed85d4f59266d5c60dd09be96b5dbd4 upstream.

When switching to an 'mm_struct' for the first time following an ASID
rollover, a new ASID may be allocated and assigned to 'mm->context.id'.
This reassignment can happen concurrently with other operations on the
mm, such as unmapping pages and subsequently issuing TLB invalidation.

Consequently, we need to ensure that (a) accesses to 'mm->context.id'
are atomic and (b) all page-table updates made prior to a TLBI using the
old ASID are guaranteed to be visible to CPUs running with the new ASID.

This was found by inspection after reviewing the VMID changes from
Shameer but it looks like a real (yet hard to hit) bug.

Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Jade Alglave <jade.alglave@arm.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210806113109.2475-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: aspeed: p2a-ctrl: Fix boundary check for mmap

commit 8b07e990fb254fcbaa919616ac77f981cb48c73d upstream.

The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.

Fixes: 01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: aspeed: lpc-ctrl: Fix boundary check for mmap

commit b49a0e69a7b1a68c8d3f64097d06dabb770fec96 upstream.

The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.

Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: aoss: Fix the out of bound usage of cooling_devs

commit a89f355e469dcda129c2522be4fdba00c1c74c83 upstream.

In "qmp_cooling_devices_register", the count value is initially
QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value,
the memory for cooling_devs is allocated. Then while calling the
"qmp_cooling_device_add" function, count value is post-incremented for
each child node.

This makes the out of bound access to the cooling_dev array. Fix it by
passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and
initializing the count to 0.

While at it, let's also free the memory allocated to cooling_dev if no
cooling device is found in DT and during unroll phase.

Cc: stable@vger.kernel.org # 5.4
Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210629153249.73428-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: ingenic: Fix incorrect pull up/down info

commit d5e931403942b3af39212960c2592b5ba741b2bf upstream.

Fix the pull up/down info for both the JZ4760 and JZ4770 SoCs, as the
previous values sometimes contradicted what's written in the programming
manual.

Fixes: b5c23aa46537 ("pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/20210717174836.14776-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: stmfx: Fix hazardous u8[] to unsigned long cast

commit 1b73e588f47397dee6e4bdfd953e0306c60b5fe5 upstream.

Casting a small array of u8 to an unsigned long is *never* OK:

- it does funny thing when the array size is less than that of a long,
  as it accesses random places in the stack
- it makes everything even more fun with a BE kernel

Fix this by building the unsigned long used as a bitmap byte by byte,
in a way that works across endianess and has no undefined behaviours.

An extra BUILD_BUG_ON() catches the unlikely case where the array
would be larger than a single unsigned long.

Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210725180830.250218-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: socfpga: agilex: add the bypass register for s2f_usr0 clock

commit d17929eb1066d1c1653aae9bb4396a9f1d6602ac upstream.

Add the bypass register for the s2f_user0_clk.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-3-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: socfpga: agilex: fix up s2f_user0_clk representation

commit f817c132db679d492d96c60993fa2f2c67ab18d0 upstream.

Correct the s2f_user0_mux clock representation.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: socfpga: agilex: fix the parents of the psi_ref_clk

commit 9d563236cca43fc4fe190b3be173444bd48e2a3b upstream.

The psi_ref_clk comes from the C2 node of the main_pll and periph_pll,
not the C3.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/thermal/tmon: Add cross compiling support

commit b5f7912bb604b47a0fe024560488a7556dce8ee7 upstream.

Default to prefixed pkg-config when crosscompiling, this matches what
other parts of the tools/ directory already do.

[dlezcano] : Reworked description

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/31302992.qZodDJZGDc@devpool47
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/ftrace: Fix requirement check of README file

commit 210f9df02611cbe641ced3239122b270fd907d86 upstream.

The selftest for ftrace checks some features by checking if the README has
text that states the feature is supported by that kernel. Unfortunately,
this check gives false positives because it many not be checked if there's
spaces in the string to check. This is due to the compare between the
required variable with the ":README" string stripped, because neither has
quotes around them.

Link: https://lkml.kernel.org/r/20210820204742.087177341@goodmis.org
Cc: "Tzvetomir Stoyanov" <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 1b8eec510ba64 ("selftests/ftrace: Support ":README" suffix for requires")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix dereference of null pointer cf

commit 05a444d3f90a3c3e6362e88a1bf13e1a60f8cace upstream.

Currently in the case where kmem_cache_alloc fails the null pointer
cf is dereferenced when assigning cf->is_capsnap = false. Fix this
by adding a null pointer check and return path.

Cc: stable@vger.kernel.org
Addresses-Coverity: ("Dereference null return")
Fixes: b2f9fa1f3bd8 ("ceph: correctly handle releasing an embedded cap flush")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p/xen: Fix end of loop tests for list_for_each_entry

commit 732b33d0dbf17e9483f0b50385bf606f724f50a2 upstream.

This patch addresses the following problems:
 - priv can never be NULL, so this part of the check is useless
 - if the loop ran through the whole list, priv->client is invalid and
it is more appropriate and sufficient to check for the end of
list_for_each_entry loop condition.

Link: http://lkml.kernel.org/r/20210727000709.225032-1-harshvardhan.jha@oracle.com
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix setting of max_pfn in shared_info

commit 4b511d5bfa74b1926daefd1694205c7f1bcf677f upstream.

Xen PV guests are specifying the highest used PFN via the max_pfn
field in shared_info. This value is used by the Xen tools when saving
or migrating the guest.

Unfortunately this field is misnamed, as in reality it is specifying
the number of pages (including any memory holes) of the guest, so it
is the highest used PFN + 1. Renaming isn't possible, as this is a
public Xen hypervisor interface which needs to be kept stable.

The kernel will set the value correctly initially at boot time, but
when adding more pages (e.g. due to memory hotplug or ballooning) a
real PFN number is stored in max_pfn. This is done when expanding the
p2m array, and the PFN stored there is even possibly wrong, as it
should be the last possible PFN of the just added P2M frame, and not
one which led to the P2M expansion.

Fix that by setting shared_info->max_pfn to the last possible PFN + 1.

Fixes: 98dd166ea3a3c3 ("x86/xen/p2m: hint at the last populated P2M entry")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20210730092622.9973-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf/hv-gpci: Fix counter value parsing

commit f9addd85fbfacf0d155e83dbee8696d6df5ed0c7 upstream.

H_GetPerformanceCounterInfo (0xF080) hcall returns the counter data in
the result buffer. Result buffer has specific format defined in the PAPR
specification. One of the fields is counter offset and width of the
counter data returned.

Counter data are returned in a unsigned char array in big endian byte
order. To get the final counter data, the values must be left shifted
byte at a time. But commit 220a0c609ad17 ("powerpc/perf: Add support for
the hv gpci (get performance counter info) interface") made the shifting
bitwise and also assumed little endian order. Because of that, hcall
counters values are reported incorrectly.

In particular this can lead to counters go backwards which messes up the
counter prev vs now calculation and leads to huge counter value
reporting:

  #: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
           -C 0 -I 1000
        time             counts unit events
     1.000078854 18,446,744,073,709,535,232      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.000213293                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     3.000320107                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     4.000428392                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     5.000537864                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     6.000649087                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     7.000760312                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     8.000865218             16,448      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     9.000978985 18,446,744,073,709,535,232      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
    10.001088891             16,384      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
    11.001201435                  0      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
    12.001307937 18,446,744,073,709,535,232      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

Fix the shifting logic to correct match the format, ie. read bytes in
big endian order.

Fixes: e4f226b1580b ("powerpc/perf/hv-gpci: Increase request buffer size")
Cc: stable@vger.kernel.org # v4.6+
Reported-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210813082158.429023-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Skip masking MSI-X on Xen PV

commit 1a519dc7a73c977547d8b5108d98c6e769c89f4b upstream.

When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:

    BUG: unable to handle page fault for address: ffffc9004069100c
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0003) - permissions violation
    RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
     e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
     e1000_probe+0x41f/0xdb0 [e1000e]
     local_pci_probe+0x42/0x80
    (...)

The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.

Add the check to make this function XEN PV compatible.

Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN

commit 4d643b66089591b4769bcdb6fd1bfeff2fe301b8 upstream.

A user space process should not need the CAP_SYS_ADMIN capability set
in order to perform a BLKREPORTZONE ioctl.

Getting the zone report is required in order to get the write pointer.
Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable
that a user space process that can read/write from/to the device, also
can get the write pointer. (Since e.g. writes have to be at the write
pointer.)

Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-3-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-zoned: allow zone management send operations without CAP_SYS_ADMIN

commit ead3b768bb51259e3a5f2287ff5fc9041eb6f450 upstream.

Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE
and BLKFINISHZONE) should be allowed under the same permissions as write().
(write() does not require CAP_SYS_ADMIN).

Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if
the fd was successfully opened with FMODE_WRITE.
(They do not require CAP_SYS_ADMIN).

Currently, zone management send operations require both CAP_SYS_ADMIN
and that the fd was successfully opened with FMODE_WRITE.

Remove the CAP_SYS_ADMIN requirement, so that zone management send
operations match the access control requirement of write(), BLKSECDISCARD
and BLKZEROOUT.

Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-2-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: reset replace target device to allocation state on close

commit 0d977e0eba234e01a60bdde27314dc21374201b3 upstream.

This crash was observed with a failed assertion on device close:

  BTRFS: Transaction aborted (error -28)
  WARNING: CPU: 1 PID: 3902 at fs/btrfs/extent-tree.c:2150 btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
  Modules linked in: btrfs blake2b_generic libcrc32c crc32c_intel xor zstd_decompress zstd_compress xxhash lzo_compress lzo_decompress raid6_pq loop
  CPU: 1 PID: 3902 Comm: kworker/u8:4 Not tainted 5.14.0-rc5-default+ #1532
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
  Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
  RIP: 0010:btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
  RSP: 0018:ffffb7a5452d7d80 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
  RBP: ffff97834176a378 R08: 0000000000000001 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff97835195d388
  R13: 0000000005b08000 R14: ffff978385484000 R15: 000000000000016c
  FS:  0000000000000000(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000056190d003fe8 CR3: 000000002a81e005 CR4: 0000000000170ea0
  Call Trace:
   flush_space+0x197/0x2f0 [btrfs]
   btrfs_async_reclaim_metadata_space+0x139/0x300 [btrfs]
   process_one_work+0x262/0x5e0
   worker_thread+0x4c/0x320
   ? process_one_work+0x5e0/0x5e0
   kthread+0x144/0x170
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x1f/0x30
  irq event stamp: 19334989
  hardirqs last  enabled at (19334997): [<ffffffffab0e0c87>] console_unlock+0x2b7/0x400
  hardirqs last disabled at (19335006): [<ffffffffab0e0d0d>] console_unlock+0x33d/0x400
  softirqs last  enabled at (19334900): [<ffffffffaba0030d>] __do_softirq+0x30d/0x574
  softirqs last disabled at (19334893): [<ffffffffab0721ec>] irq_exit_rcu+0x12c/0x140
  ---[ end trace 45939e308e0dd3c7 ]---
  BTRFS: error (device vdd) in btrfs_run_delayed_refs:2150: errno=-28 No space left
  BTRFS info (device vdd): forced readonly
  BTRFS warning (device vdd): failed setting block group ro: -30
  BTRFS info (device vdd): suspending dev_replace for unmount
  assertion failed: !test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state), in fs/btrfs/volumes.c:1150
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.h:3431!
  invalid opcode: 0000 [#1] PREEMPT SMP
  CPU: 1 PID: 3982 Comm: umount Tainted: G        W         5.14.0-rc5-default+ #1532
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
  RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
  RSP: 0018:ffffb7a5454c7db8 EFLAGS: 00010246
  RAX: 0000000000000068 RBX: ffff978364b91c00 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
  RBP: ffff9783523a4c00 R08: 0000000000000001 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000001 R12: ffff9783523a4d18
  R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000003
  FS:  00007f61c8f42800(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000056190cffa810 CR3: 0000000030b96002 CR4: 0000000000170ea0
  Call Trace:
   btrfs_close_one_device.cold+0x11/0x55 [btrfs]
   close_fs_devices+0x44/0xb0 [btrfs]
   btrfs_close_devices+0x48/0x160 [btrfs]
   generic_shutdown_super+0x69/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x2c/0xa0
   cleanup_mnt+0x144/0x1b0
   task_work_run+0x59/0xa0
   exit_to_user_mode_loop+0xe7/0xf0
   exit_to_user_mode_prepare+0xaf/0xf0
   syscall_exit_to_user_mode+0x19/0x50
   do_syscall_64+0x4a/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:

  close_ctree():
    btrfs_dev_replace_suspend_for_unmount();
    btrfs_close_devices():
      btrfs_close_fs_devices():
        btrfs_close_one_device():
          ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
                 &device->dev_state));

However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.

To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.

Reported-by: David Sterba <dsterba@suse.com>
Fixes: b2a616676839 ("btrfs: fix rw device counting in __btrfs_free_extra_devids")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: wake up async_delalloc_pages waiters after submit

commit ac98141d140444fe93e26471d3074c603b70e2ca upstream.

We use the async_delalloc_pages mechanism to make sure that we've
completed our async work before trying to continue our delalloc
flushing.  The reason for this is we need to see any ordered extents
that were created by our delalloc flushing.  However we're waking up
before we do the submit work, which is before we create the ordered
extents.  This is a pretty wide race window where we could potentially
think there are no ordered extents and thus exit shrink_delalloc
prematurely.  Fix this by waking us up after we've done the work to
create ordered extents.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io-wq: fix wakeup race when adding new work

commit 87df7fb922d18e96992aa5e824aa34b2065fef59 upstream.

When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:

CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed

Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.

Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fail links of cancelled timeouts

commit 2ae2eb9dde18979b40629dd413b9adbd6c894cdf upstream.

When we cancel a timeout we should mark it with REQ_F_FAIL, so
linked requests are cancelled as well, but not queued for further
execution.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fff625b44eeced3a5cae79f60e6acf3fbdf8f990.1631192135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: add ->splice_fd_in checks

commit 26578cda3db983b17cabe4e577af26306beb9987 upstream.

->splice_fd_in is used only by splice/tee, but no other request checks
it for validity. Add the check for most of request types excluding
reads/writes/sends/recvs, we don't want overhead for them and can leave
them be as is until the field is actually used.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f44bc2acd6777d932de3d71a5692235b5b2b7397.1629451684.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: place fixed tables under memcg limits

commit 0bea96f59ba40e63c0ae93ad6a02417b95f22f4d upstream.

Fixed tables may be large enough, place all of them together with
allocated tags under memcg limits.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b3ac9f5da9821bb59837b5fe25e8ef4be982218c.1629451684.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: limit fixed table size by RLIMIT_NOFILE

Limit the number of files in io_uring fixed tables by RLIMIT_NOFILE,
that's the first and the simpliest restriction that we should impose.

Cc: stable@vger.kernel.org
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b2756c340aed7d6c0b302c26dab50c6c5907f4ce.1629451684.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: tps65910: Correct driver module alias

commit 8d448fa0a8bb1c8d94eef7647edffe9ac81a281e upstream.

The TPS65910 RTC driver module doesn't auto-load because of the wrong
module alias that doesn't match the device name, fix it.

Cc: stable@vger.kernel.org
Reported-by: Anton Bambura <jenneron@protonmail.com>
Tested-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210808160030.8556-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.66

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "time: Handle negative seconds correctly in timespec64_to_ns()"

This reverts commit 656f343d724b45295f73000eb6e7bd3d212af116 which is
commit 39ff83f2f6cc5cc1458dfcea9697f96338210beb upstream.

Arnd reports that this needs more review before being merged into all of
the trees.

Link: https://lore.kernel.org/r/CAK8P3a0z5jE=Z3Ps5bFTCFT7CHZR1JQ8VhdntDJAfsUxSPCcEw@mail.gmail.com
Reported-by: Arnd Bergmann <arnd@kernel.org>
Cc: Lukas Hannen <lukas.hannen@opensource.tttech-industrial.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "posix-cpu-timers: Force next expiration recalc after itimer reset"

This reverts commit 13ccaef77ee86047033c50bf59cb19e0dda3aa97 which is
commit 406dd42bd1ba0c01babf9cde169bb319e52f6147 upstream.

It is reported to cause regressions.  A proposed fix has been posted,
but it is not in a released kernel yet.  So just revert this from the
stable release so that the bug is fixed.  If it's really needed we can
add it back in in a future release.

Link: https://lore.kernel.org/r/87ilz1pwaq.fsf@wylie.me.uk
Reported-by: "Alan J. Wylie" <alan@wylie.me.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "block: nbd: add sanity check for first_minor"

This reverts commit 4b21d4e820bb9a1415ec76dfe565e4c5937337dd which is
commit b1a811633f7321cf1ae2bb76a66805b7720e44c9 upstream.

The backport of this is reported to be causing some problems, so revert
this for now until they are worked out.

Link: https://lore.kernel.org/r/CACPK8XfUWoOHr-0RwRoYoskia4fbAbZ7DYf5wWBnv6qUnGq18w@mail.gmail.com
Reported-by: Joel Stanley <joel@jms.id.au>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Skripkin <paskripkin@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Bluetooth: Move shutdown callback before flushing tx and rx queue"

This reverts commit 471128476819777a7b71f2b90bc868ccf74b185f.

Botched backport, dropping to rework for next release.

Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.65

Link: https://lore.kernel.org/r/20210913131100.316353015@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: kirkwood: Fix a clocking boot regression

commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream.

Since a few kernel releases the Pogoplug 4 has crashed like this
during boot:

Unable to handle kernel NULL pointer dereference at virtual address 00000002
(...)
[<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c)
[<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c)
[<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44)
[<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4)
[<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c)
[<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac)
[<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214)
[<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c)
[<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c)
[<c0ab3d18>] (start_kernel) from [<00000000>] (0x0)
Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000)

This is because the "powersave" mux clock 0 was provided in an unterminated
array, which is required by the loop in the driver:

        /* Count, allocate, and register clock muxes */
        for (n = 0; desc[n].name;)
                n++;

Here n will go out of bounds and then call clk_register_mux() on random
memory contents after the mux clock.

Fix this by terminating the array with a blank entry.

Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer")
Cc: stable@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight: pwm_bl: Improve bootloader/kernel device handover

commit 79fad92f2e596f5a8dd085788a24f540263ef887 upstream.

Currently there are (at least) two problems in the way pwm_bl starts
managing the enable_gpio pin. Both occur when the backlight is initially
off and the driver finds the pin not already in output mode and, as a
result, unconditionally switches it to output-mode and asserts the signal.

Problem 1: This could cause the backlight to flicker since, at this stage
in driver initialisation, we have no idea what the PWM and regulator are
doing (an unconfigured PWM could easily "rest" at 100% duty cycle).

Problem 2: This will cause us not to correctly honour the
post_pwm_on_delay (which also risks flickers).

Fix this by moving the code to configure the GPIO output mode until after
we have examines the handover state. That allows us to initialize
enable_gpio to off if the backlight is currently off and on if the
backlight is on.

Cc: stable@vger.kernel.org
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbmem: don't allow too huge resolutions

commit 8c28051cdcbe9dfcec6bd0a4709d67a09df6edae upstream.

syzbot is reporting page fault at vga16fb_fillrect() [1], for
vga16fb_check_var() is failing to detect multiplication overflow.

  if (vxres * vyres > maxmem) {
    vyres = maxmem / vxres;
    if (vyres < yres)
      return -ENOMEM;
  }

Since no module would accept too huge resolutions where multiplication
overflow happens, let's reject in the common path.

Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e
Reported-by: syzbot <syzbot+04168c8063cfdde1db5e@syzkaller.appspotmail.com>
Debugged-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IMA: remove the dependency on CRYPTO_MD5

commit 8510505d55e194d3f6c9644c9f9d12c4f6b0395a upstream.

MD5 is a weak digest algorithm that shouldn't be used for cryptographic
operation. It hinders the efficiency of a patch set that aims to limit
the digests allowed for the extended file attribute namely security.ima.
MD5 is no longer a requirement for IMA, nor should it be used there.

The sole place where we still use the MD5 algorithm inside IMA is setting
the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5'
parameter on the command line.  With commit ab60368ab6a4 ("ima: Fallback
to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully
when CRYPTO_MD5 is not set:
ima: Can not allocate md5 (reason: -2)
ima: Allocating md5 failed, going to use default hash algorithm sha256

Remove the CRYPTO_MD5 dependency for IMA.

Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: include commit number in patch description for
stable.]
Cc: stable@vger.kernel.org # 4.17
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IMA: remove -Wmissing-prototypes warning

commit a32ad90426a9c8eb3915eed26e08ce133bd9e0da upstream.

With W=1 build, the compiler throws warning message as below:

   security/integrity/ima/ima_mok.c:24:12: warning:
   no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes]
       __init int ima_mok_init(void)

Silence the warning by adding static keyword to ima_mok_init().

Signed-off-by: Austin Kim <austin.kim@lge.com>
Fixes: 41c89b64d718 ("IMA: create machine owner and blacklist keyrings")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: flush extending writes

commit 59bda8ecee2ffc6a602b7bf2b9e43ca669cdbdcd upstream.

Callers of fuse_writeback_range() assume that the file is ready for
modification by the server in the supplied byte range after the call
returns.

If there's a write that extends the file beyond the end of the supplied
range, then the file needs to be extended to at least the end of the range,
but currently that's not done.

There are at least two cases where this can cause problems:

 - copy_file_range() will return short count if the file is not extended
   up to end of the source range.

 - FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE will not extend the file,
   hence the region may not be fully allocated.

Fix by flushing writes from the start of the range up to the end of the
file.  This could be optimized if the writes are non-extending, etc, but
it's probably not worth the trouble.

Fixes: a2bc92362941 ("fuse: fix copy_file_range() in the writeback case")
Fixes: 6b1bdb56b17c ("fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)")
Cc: <stable@vger.kernel.org> # v5.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: truncate pagecache on atomic_o_trunc

commit 76224355db7570cbe6b6f75c8929a1558828dd55 upstream.

fuse_finish_open() will be called with FUSE_NOWRITE in case of atomic
O_TRUNC.  This can deadlock with fuse_wait_on_page_writeback() in
fuse_launder_page() triggered by invalidate_inode_pages2().

Fix by replacing invalidate_inode_pages2() in fuse_finish_open() with a
truncate_pagecache() call.  This makes sense regardless of FOPEN_KEEP_CACHE
or fc->writeback cache, so do it unconditionally.

Reported-by: Xie Yongji <xieyongji@bytedance.com>
Reported-and-tested-by: syzbot+bea44a5189836d956894@syzkaller.appspotmail.com
Fixes: e4648309b85a ("fuse: truncate pending writes on O_TRUNC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: add pinctrl-{names, 0} for all gpios

commit bf781869e5cf3e4ec1a47dad69b6f0df97629cbd upstream.

Add pinctrl-names and pinctrl-0 properties on controllers that claims to
use pins to avoid failures due to
commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
and also to avoid using pins that may be claimed my other IPs.

Fixes: b7c2b6157079 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@microchip.com
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Unconditionally clear nested.pi_pending on nested VM-Enter

commit f7782bb8d818d8f47c26b22079db10599922787a upstream.

Clear nested.pi_pending on nested VM-Enter even if L2 will run without
posted interrupts enabled.  If nested.pi_pending is left set from a
previous L2, vmx_complete_nested_posted_interrupt() will pick up the
stale flag and exit to userspace with an "internal emulation error" due
the new L2 not having a valid nested.pi_desc.

Arguably, vmx_complete_nested_posted_interrupt() should first check for
posted interrupts being enabled, but it's also completely reasonable that
KVM wouldn't screw up a fundamental flag.  Not to mention that the mere
existence of nested.pi_pending is a long-standing bug as KVM shouldn't
move the posted interrupt out of the IRR until it's actually processed,
e.g. KVM effectively drops an interrupt when it performs a nested VM-Exit
with a "pending" posted interrupt.  Fixing the mess is a future problem.

Prior to vmx_complete_nested_posted_interrupt() interpreting a null PI
descriptor as an error, this was a benign bug as the null PI descriptor
effectively served as a check on PI not being enabled.  Even then, the
new flow did not become problematic until KVM started checking the result
of kvm_check_nested_events().

Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing")
Fixes: 966eefb89657 ("KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable")
Fixes: 47d3530f86c0 ("KVM: x86: Exit to userspace when kvm_check_nested_events fails")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810144526.2662272-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation

commit 81b4b56d4f8130bbb99cf4e2b48082e5b4cfccb9 upstream.

If we are emulating an invalid guest state, we don't have a correct
exit reason, and thus we shouldn't do anything in this function.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210826095750.1650467-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 95b5a48c4f2b ("KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fn", 2019-06-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted

commit d9130a2dfdd4b21736c91b818f87dbc0ccd1e757 upstream.

When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature
especially there's a big tsc warp (like a new vCPU is hot-added into VM
which has been up for a long time), tsc_offset is added by a large value
then go back to guest. This causes system time jump as tsc_timestamp is
not adjusted in the meantime and pvclock monotonic character.
To fix this, just notify kvm to update vCPU's guest time before back to
guest.

Cc: stable@vger.kernel.org
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: index kvm->arch.idle_mask by vcpu_idx

commit a3e03bc1368c1bc16e19b001fc96dc7430573cc8 upstream.

While in practice vcpu->vcpu_idx ==  vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.

Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
                vcpu = kvm_get_vcpu(kvm, vcpu_id);
do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id.  The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.

Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx.  To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.

Fixes: 1ee0bc559dc3 ("KVM: s390: get rid of local_int array")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"

commit e7177339d7b5f9594b316842122b5fda9513d5e2 upstream.

Revert a misguided illegal GPA check when "translating" a non-nested GPA.
The check is woefully incomplete as it does not fill in @exception as
expected by all callers, which leads to KVM attempting to inject a bogus
exception, potentially exposing kernel stack information in the process.

 WARNING: CPU: 0 PID: 8469 at arch/x86/kvm/x86.c:525 exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
 CPU: 1 PID: 8469 Comm: syz-executor531 Not tainted 5.14.0-rc7-syzkaller #0
 RIP: 0010:exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
 Call Trace:
  x86_emulate_instruction+0xef6/0x1460 arch/x86/kvm/x86.c:7853
  kvm_mmu_page_fault+0x2f0/0x1810 arch/x86/kvm/mmu/mmu.c:5199
  handle_ept_misconfig+0xdf/0x3e0 arch/x86/kvm/vmx/vmx.c:5336
  __vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6021 [inline]
  vmx_handle_exit+0x336/0x1800 arch/x86/kvm/vmx/vmx.c:6038
  vcpu_enter_guest+0x2a1c/0x4430 arch/x86/kvm/x86.c:9712
  vcpu_run arch/x86/kvm/x86.c:9779 [inline]
  kvm_arch_vcpu_ioctl_run+0x47d/0x1b20 arch/x86/kvm/x86.c:10010
  kvm_vcpu_ioctl+0x49e/0xe50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3652

The bug has escaped notice because practically speaking the GPA check is
useless.  The GPA check in question only comes into play when KVM is
walking guest page tables (or "translating" CR3), and KVM already handles
illegal GPA checks by setting reserved bits in rsvd_bits_mask for each
PxE, or in the case of CR3 for loading PTDPTRs, manually checks for an
illegal CR3.  This particular failure doesn't hit the existing reserved
bits checks because syzbot sets guest.MAXPHYADDR=1, and IA32 architecture
simply doesn't allow for such an absurd MAXPHYADDR, e.g. 32-bit paging
doesn't define any reserved PA bits checks, which KVM emulates by only
incorporating the reserved PA bits into the "high" bits, i.e. bits 63:32.

Simply remove the bogus check.  There is zero meaningful value and no
architectural justification for supporting guest.MAXPHYADDR < 32, and
properly filling the exception would introduce non-trivial complexity.

This reverts commit ec7771ab471ba6a945350353617e2e3385d0e013.

Fixes: ec7771ab471b ("KVM: x86: mmu: Add guest physical address check in translate_gpa()")
Cc: stable@vger.kernel.org
Reported-by: syzbot+200c08e88ae818f849ce@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210831164224.1119728-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Fix a maybe-uninitialized build warning treated as error

commit 527f721478bce3f49b513a733bacd19d6f34b08c upstream.

The recent commit

  064855a69003 ("x86/resctrl: Fix default monitoring groups reporting")

caused a RHEL build failure with an uninitialized variable warning
treated as an error because it removed the default case snippet.

The RHEL Makefile uses '-Werror=maybe-uninitialized' to force possibly
uninitialized variable warnings to be treated as errors. This is also
reported by smatch via the 0day robot.

The error from the RHEL build is:

  arch/x86/kernel/cpu/resctrl/monitor.c: In function ‘__mon_event_count’:
  arch/x86/kernel/cpu/resctrl/monitor.c:261:12: error: ‘m’ may be used
  uninitialized in this function [-Werror=maybe-uninitialized]
    m->chunks += chunks;
              ^~

The upstream Makefile does not build using '-Werror=maybe-uninitialized'.
So, the problem is not seen there. Fix the problem by putting back the
default case snippet.

 [ bp: note that there's nothing wrong with the code and other compilers
   do not trigger this warning - this is being done just so the RHEL compiler
   is happy. ]

Fixes: 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting")
Reported-by: Terry Bowman <Terry.Bowman@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/162949631908.23903.17090272726012848523.stgit@bmoger-ubuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op

commit f11dd0d80555cdc8eaf5cfc9e19c9e198217f9f1 upstream.

Commit:

   2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")

neglected to do so.

Fixes: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210817221048.88063-2-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fix data race between tiocsti() and flush_to_ldisc()

commit bb2853a6a421a052268eee00fd5d3f6b3504b2b1 upstream.

The ops->receive_buf() may be accessed concurrently from these two
functions.  If the driver flushes data to the line discipline
receive_buf() method while tiocsti() is waiting for the
ops->receive_buf() to finish its work, the data race will happen.

For example:
tty_ioctl |tty_ldisc_receive_buf
 ->tioctsi | ->tty_port_default_receive_buf
|  ->tty_ldisc_receive_buf
   ->hci_uart_tty_receive |   ->hci_uart_tty_receive
    ->h4_recv                   |    ->h4_recv

In this case, the h4 receive buffer will be overwritten by the
latecomer, and we will lost the data.

Hence, change tioctsi() function to use the exclusive lock interface
from tty_buffer to avoid the data race.

Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>