bpf, riscv: Limit to 33 tail calls

[ Upstream commit 96bc4432f5ade1045521f3b247f516b1478166bd ]

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls.  I tested it using the above selftest on an emulated
RISCV64.

Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls1028a: fix typo in TMU calibration data

[ Upstream commit 961f8209c8d5ef5d33da42e6656d7c8179899da0 ]

The temperature sensor may jump backwards because there is a wrong
calibration value. Both values have to be monotonically increasing.
Fix it.

This was tested on a custom board.

Fixes: 571cebfe8e2b ("arm64: dts: ls1028a: Add Thermal Monitor Unit node")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: bcm283x: Fix critical trip point

[ Upstream commit 30e647a764d446723a7e0fb08d209e0104f16173 ]

During definition of the CPU thermal zone of BCM283x SoC family there
was a misunderstanding of the meaning "criticial trip point" and the
thermal throttling range of the VideoCore firmware. The latter one takes
effect when the core temperature is at least 85 degree celsius or higher

So the current critical trip point doesn't make sense, because the
thermal shutdown appears before the firmware has a chance to throttle
the ARM core(s).

Fix these unwanted shutdowns by increasing the critical trip point
to a value which shouldn't be reached with working thermal throttling.

Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: omap2plus_defconfig: Add back DEBUG_FS

[ Upstream commit e00b59d30506dc9ef91caf2f3c584209cc9f61e4 ]

Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am335x-sancloud-bbe: fix phy mode

[ Upstream commit c842b8c4ff9859f750447f3ca08f64b2ed23cebc ]

The phy mode should be rgmii-id.  For some reason, it used to work with
rgmii-txid but doesn't any more.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: split cht and byt debug window sizes

[ Upstream commit f84337c3fb8ff4d533ccbed0d2db4e8587d0ff58 ]

Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header

[ Upstream commit 8edc95667646a75f0fc97e08ecb180581fdff300 ]

Added warning log when found some unknown FW boot ext header,
to improve debuggability.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: topology: Check return value for soc_tplg_pcm_create()

[ Upstream commit a3039aef52d9ffeb67e9211899cd3e8a2953a01f ]

The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.

Fix that by checking the status and rejecting the topology on error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: topology: Check return value for snd_soc_add_dai_link()

[ Upstream commit 76d2703649321c296df7ec0dafd50add96215de4 ]

snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.

Fix that by checking the return status and free the memory in case
of an error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: Do not register resource data for missing resets

[ Upstream commit db23808615e29d9a04f96806cac56f78b0fee0ef ]

When an optional reset is not present, __devm_reset_control_get() and
devm_reset_control_array_get() still register resource data to release
the non-existing reset on cleanup, which is futile.

Fix this by skipping NULL reset control pointers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-cavium-thunderx: Add missing pci_release_regions()

[ Upstream commit a841e2853e1afecc2ee692b8cc5bff606bc84e4c ]

The driver forgets to call pci_release_regions() in probe failure
and remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Cygnus: Fix MDIO node address/size cells

[ Upstream commit fac2c2da3596d77c343988bb0d41a8c533b2e73c ]

The MDIO node on Cygnus had an reversed #address-cells and
 #size-cells properties, correct those.

Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY")
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: exynos_defconfig: Restore debugfs support

[ Upstream commit a2315d3aea5976acd919d3d3fcf82f752562c25b ]

Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.

In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.

Enable it again explicitly, as debugfs support is essential for various
automated testing tools.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: safesetid: Fix Makefile to set correct test program

[ Upstream commit 8ef1ec0ca32c6f8a87f5b4c24b1db26da67c5609 ]

Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.

Without this fix, I got following error.
  ----
  TAP version 13
  1..1
  # selftests: safesetid: run_tests.sh
  # Warning: file run_tests.sh is missing!
  not ok 1 selftests: safesetid: run_tests.sh
  ----

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: safesetid: Check the return value of setuid/setgid

[ Upstream commit 295c4e21cf27ac9af542140e3e797df9e0cf7b5f ]

Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.

safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
  setuid(NO_POLICY_USER);
  ^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
  setgid(NO_POLICY_USER);
  ^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
  setuid(RESTRICTED_PARENT);
  ^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
  setgid(RESTRICTED_PARENT);
  ^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
   setuid(child_uid);
   ^~~~~~~~~~~~~~~~~

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: safesetid: Move link library to LDLIBS

[ Upstream commit be12252212fa3dfed6e75112865095c484c0ce87 ]

Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.

Without this, safesetid failed to build with link error
as below.

----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----

Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Fix multiple kprobe testcase

[ Upstream commit 5cc6c8d4a99d0ee4d5466498e258e593df1d3eb6 ]

Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
 - Since `wc -l FILE` returns not only line number but also
   FILE filename, following "if" statement always failed.
   Fix this bug by replacing it with 'cat FILE | wc -l'
 - Since "while do-done loop" block with pipeline becomes a
   subshell, $N local variable is not update outside of
   the loop.
   Fix this bug by using actual target number (256) instead
   of $N.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Do not to use absolute debugfs path

[ Upstream commit ba1b9c5048e43716921abe3a1db19cebebf4a5f5 ]

Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Fix ftrace test cases to check unsupported

[ Upstream commit 25deae098e748d8d36bc35129a66734b8f6925c9 ]

Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.

Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Fix to check the existence of set_ftrace_filter

[ Upstream commit fd1baf6ca2ea3550ea47f2bb0bdcf34ec764a779 ]

If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fix MDIO node address/size cells

[ Upstream commit 093c3f94e922d83a734fc4da08cc5814990f32c6 ]

The MDIO node on BCM5301X had an reversed #address-cells and
 #size-cells properties, correct those, silencing checker warnings:

.../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected

Reported-by: Simon Horman <simon.horman@netronome.com>
Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables_offload: return EOPNOTSUPP if rule specifies no actions

[ Upstream commit 81ec61074bcf68acfcb2820cda3ff9d9984419c7 ]

If the rule only specifies the matching side, return EOPNOTSUPP.
Otherwise, the front-end relies on the drivers to reject this rule.

Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: skip module reference count bump on object updates

[ Upstream commit fd57d0cbe187e93f63777d36e9f49293311d417f ]

Use __nft_obj_type_get() instead, otherwise there is a module reference
counter leak.

Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init()

[ Upstream commit 0d2c96af797ba149e559c5875c0151384ab6dd14 ]

Userspace might bogusly sent NFT_DATA_VERDICT in several netlink
attributes that assume NFT_DATA_VALUE. Moreover, make sure that error
path invokes nft_data_release() to decrement the reference count on the
chain object.

Fixes: 96518518cc41 ("netfilter: add nftables")
Fixes: 0f3cd9b36977 ("netfilter: nf_tables: add range expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_END

[ Upstream commit bffc124b6fe37d0ae9b428d104efb426403bb5c9 ]

Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements
whose NFT_SET_ELEM_INTERVAL_END flag is set on.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named sets

[ Upstream commit db3b665dd77b34e34df00e17d7b299c98fcfb2c5 ]

The existing rbtree implementation might store consecutive elements
where the closing element and the opening element might overlap, eg.

[ a, a+1) [ a+1, a+2)

This patch removes the optimization for non-anonymous sets in the exact
matching case, where it is assumed to stop searching in case that the
closing element is found. Instead, invalidate candidate interval and
keep looking further in the tree.

The lookup/get operation might return false, while there is an element
in the rbtree. Moreover, the get operation returns true as if a+2 would
be in the tree. This happens with named sets after several set updates.

The existing lookup optimization (that only works for the anonymous
sets) might not reach the opening [ a+1,... element if the closing
...,a+1) is found in first place when walking over the rbtree. Hence,
walking the full tree in that case is needed.

This patch fixes the lookup and get operations.

Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Fixes: ba0e4d9917b4 ("netfilter: nf_tables: get set elements via netlink")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: uapi: Avoid undefined left-shift in xt_sctp.h

[ Upstream commit 164166558aacea01b99c8c8ffb710d930405ba69 ]

With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is
undefined for the signed 32-bit value 1. Avoid this by declaring 1 as
unsigned.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: vexpress: Set-up shared OPP table instead of individual for each CPU

[ Upstream commit 2a76352ad2cc6b78e58f737714879cc860903802 ]

Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.

We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.

Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing

[ Upstream commit 0aeb1f2b74f3402e9cdb7c0b8e2c369c9767301e ]

Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.

Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/earlycon: Remap entire framebuffer after page initialization

[ Upstream commit b418d660bb9798d2249ac6a46c844389ef50b6a5 ]

When commit:

  69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")

moved the x86 specific EFI earlyprintk implementation to a shared location,
it also tweaked the behaviour. In particular, it dropped a trick with full
framebuffer remapping after page initialization, leading to two regressions:

  1) very slow scrolling after page initialization,
  2) kernel hang when the 'keep_bootcon' command line argument is passed.

Putting the tweak back fixes #2 and mitigates #1, i.e., it limits the slow
behavior to the early boot stages, presumably due to eliminating heavy
map()/unmap() operations per each pixel line on the screen.

 [ ardb: ensure efifb is unmapped again unless keep_bootcon is in effect. ]
 [ mingo: speling fixes. ]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Fixes: 69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Link: https://lkml.kernel.org/r/20191206165542.31469-7-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/gop: Fix memory leak in __gop_query32/64()

[ Upstream commit ff397be685e410a59c34b21ce0c55d4daa466bb7 ]

efi_graphics_output_protocol::query_mode() returns info in
callee-allocated memory which must be freed by the caller, which
we aren't doing.

We don't actually need to call query_mode() in order to obtain the
info for the current graphics mode, which is already there in
gop->mode->info, so just access it directly in the setup_gop32/64()
functions.

Also nothing uses the size of the info structure, so don't update the
passed-in size (which is the size of the gop_handle table in bytes)
unnecessarily.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/gop: Return EFI_SUCCESS if a usable GOP was found

[ Upstream commit dbd89c303b4420f6cdb689fd398349fc83b059dd ]

If we've found a usable instance of the Graphics Output Protocol
(GOP) with a framebuffer, it is possible that one of the later EFI
calls fails while checking if any support console output. In this
case status may be an EFI error code even though we found a usable
GOP.

Fix this by explicitly return EFI_SUCCESS if a usable GOP has been
located.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs

[ Upstream commit 6fc3cec30dfeee7d3c5db8154016aff9d65503c5 ]

If we don't find a usable instance of the Graphics Output Protocol
(GOP) because none of them have a framebuffer (i.e. they were all
PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return
EFI_SUCCESS even though we didn't find a usable GOP.

Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are
found, allowing the caller to probe for UGA instead.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: netfilter: use randomized netns names

[ Upstream commit 5a2e6af81807d4616f9839ad0ae7d1313b45c64d ]

Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.

Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89

[ Upstream commit 7eccc05c7101f34cc36afe9405d15de6d4099fb4 ]

When the Teclast X89 quirk was added we did not have jack-detection
support yet.

Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

[ Upstream commit af164898482817a1d487964b68f3c21bae7a1beb ]

Michael Weiser reported that he got this error during a kexec rebooting:

  esrt: Unsupported ESRT version 2904149718861218184.

The ESRT memory stays in EFI boot services data, and it was reserved
in kernel via efi_mem_reserve().  The initial purpose of the reservation
is to reuse the EFI boot services data across kexec reboot. For example
the BGRT image data and some ESRT memory like Michael reported.

But although the memory is reserved it is not updated in the X86 E820 table,
and kexec_file_load() iterates system RAM in the IO resource list to find places
for kernel, initramfs and other stuff. In Michael's case the kexec loaded
initramfs overwrote the ESRT memory and then the failure happened.

Since kexec_file_load() depends on the E820 table being updated, just fix this
by updating the reserved EFI boot services memory as reserved type in E820.

Originally any memory descriptors with EFI_MEMORY_RUNTIME attribute are
bypassed in the reservation code path because they are assumed as reserved.

But the reservation is still needed for multiple kexec reboots,
and it is the only possible case we come here thus just drop the code
chunk, then everything works without side effects.

On my machine the ESRT memory sits in an EFI runtime data range, it does
not trigger the problem, but I successfully tested with BGRT instead.
both kexec_load() and kexec_file_load() work and kdump works as well.

[ mingo: Edited the changelog. ]

Reported-by: Michael Weiser <michael@weiser.dinsnail.net>
Tested-by: Michael Weiser <michael@weiser.dinsnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kexec@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204075233.GA10520@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: fix regulator_register() error paths to properly release rdev

[ Upstream commit a3cde9534ebdafe18a9bbab208df724c57e6c8e8 ]

There are several issues with the error handling code of
the regulator_register() function:
        ret = device_register(&rdev->dev);
        if (ret != 0) {
                put_device(&rdev->dev); --> rdev released
                goto unset_supplies;
        }
...
unset_supplies:
...
        unset_regulator_supplies(rdev); --> use-after-free
...
clean:
        if (dangling_of_gpiod)
                gpiod_put(config->ena_gpiod);
        kfree(rdev);                     --> double free

We add a variable to record the failure of device_register() and
move put_device() down a bit to avoid the above issues.

Fixes: c438b9d01736 ("regulator: core: Move registration of regulator device")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191201030250.38074-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libtraceevent: Copy pkg-config file to output folder when using O=

[ Upstream commit 15b3904f8e884e0d34d5f09906cf6526d0b889a2 ]

When we use 'O=' with make to build libtraceevent in a separate folder
it still copies 'libtraceevent.pc' to its source folder. Modify the
Makefile so that it uses the output folder to copy the pkg-config file
and install from there.

Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libtraceevent: Fix lib installation with O=

[ Upstream commit 587db8ebdac2c5eb3a8851e16b26f2e2711ab797 ]

When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:

  INSTALL  /home/sudip/linux/obj-trace/libtraceevent.a
  INSTALL  /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0

  cp: cannot stat 'libtraceevent.a': No such file or directory
  Makefile:225: recipe for target 'install_lib' failed
  make: *** [install_lib] Error 1

I used the command:

  make O=../../../obj-trace DESTDIR=~/test prefix==/usr  install

It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.

So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.

Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()

[ Upstream commit 1e58252e334dc3f3756f424a157d1b7484464c40 ]

mwifiex_process_tdls_action_frame() without checking
the incoming tdls infomation element's vality before use it,
this may cause multi heap buffer overflows.

Fix them by putting vality check before use it.

IE is TLV struct, but ht_cap and  ht_oper aren’t TLV struct.
the origin marvell driver code is wrong:

memcpy(&sta_ptr->tdls_cap.ht_oper, pos,....
memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,...

Fix the bug by changing pos(the address of IE) to
pos+2 ( the address of IE value ).

Signed-off-by: qize wang <wangqize888888888@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables_offload: Check for the NETDEV_UNREGISTER event

[ Upstream commit d1f4c966475c6dd2545c6625022cb24e878bee11 ]

Check for the NETDEV_UNREGISTER event from the nft_offload_netdev_event
function, which is the event that actually triggers the clean up.

Fixes: 06d392cbe3db ("netfilter: nf_tables_offload: remove rules when the device unregisters")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/intel: Disable HPET on Intel Ice Lake platforms

[ Upstream commit e0748539e3d594dd26f0d27a270f14720b22a406 ]

Like CFL and CFL-H, ICL SoC has skewed HPET timer once it hits PC10.
So let's disable HPET on ICL.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: feng.tang@intel.com
Cc: harry.pan@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20191129062303.18982-2-kai.heng.feng@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ctnetlink: netns exit must wait for callbacks

[ Upstream commit 18a110b022a5c02e7dc9f6109d0bd93e58ac6ebb ]

Curtis Taylor and Jon Maxwell reported and debugged a crash on 3.10
based kernel.

Crash occurs in ctnetlink_conntrack_events because net->nfnl socket is
NULL.  The nfnl socket was set to NULL by netns destruction running on
another cpu.

The exiting network namespace calls the relevant destructors in the
following order:

1. ctnetlink_net_exit_batch

This nulls out the event callback pointer in struct netns.

2. nfnetlink_net_exit_batch

This nulls net->nfnl socket and frees it.

3. nf_conntrack_cleanup_net_list

This removes all remaining conntrack entries.

This is order is correct. The only explanation for the crash so ar is:

cpu1: conntrack is dying, eviction occurs:
 -> nf_ct_delete()
   -> nf_conntrack_event_report \
     -> nf_conntrack_eventmask_report
       -> notify->fcn() (== ctnetlink_conntrack_events).

cpu1: a. fetches rcu protected pointer to obtain ctnetlink event callback.
      b. gets interrupted.
 cpu2: runs netns exit handlers:
     a runs ctnetlink destructor, event cb pointer set to NULL.
     b runs nfnetlink destructor, nfnl socket is closed and set to NULL.
cpu1: c. resumes and trips over NULL net->nfnl.

Problem appears to be that ctnetlink_net_exit_batch only prevents future
callers of nf_conntrack_eventmask_report() from obtaining the callback.
It doesn't wait of other cpus that might have already obtained the
callbacks address.

I don't see anything in upstream kernels that would prevent similar
crash: We need to wait for all cpus to have exited the event callback.

Fixes: 9592a5c01e79dbc59eb56fa ("netfilter: ctnetlink: netns support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/spinlock/debug: Fix various data races

[ Upstream commit 1a365e822372ba24c9da0822bc583894f6f3d821 ]

This fixes various data races in spinlock_debug. By testing with KCSAN,
it is observable that the console gets spammed with data races reports,
suggesting these are extremely frequent.

Example data race report:

  read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2:
   debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline]
   do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112
   __raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline]
   _raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151
   spin_lock include/linux/spinlock.h:338 [inline]
   get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873
   get_partial_node mm/slub.c:1870 [inline]
  <snip>

  write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3:
   debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline]
   do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138
   __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline]
   _raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191
   spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
   free_debug_processing+0x1b3/0x210 mm/slub.c:1214
   __slab_free+0x292/0x400 mm/slub.c:2864
  <snip>

As a side-effect, with KCSAN, this eventually locks up the console, most
likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug ->
KCSAN detects data race -> kcsan_print_report() -> printk lock ->
deadlock.

This fix will 1) avoid the data races, and 2) allow using lock debugging
together with KCSAN.

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fsl: Handle the single hardwired chipselect case

[ Upstream commit 7251953d784baf7e5416afabe030a0e81de1a938 ]

The Freescale MPC8xxx had a special quirk for handling a
single hardwired chipselect, the case when we're using neither
GPIO nor native chip select: when inspecting the device tree
and finding zero "cs-gpios" on the device node the code would
assume we have a single hardwired chipselect that leaves the
device always selected.

This quirk is not handled by the new core code, so we need
to check the "cs-gpios" explicitly in the driver and set
pdata->max_chipselect = 1 which will later fall through to
the SPI master ->num_chipselect.

Make sure not to assign the chip select handler in this
case: there is no handling needed since the chip is always
selected, and this is what the old code did as well.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> (No tested the
Link: https://lore.kernel.org/r/20191128083718.39177-3-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: Handle counting of Freescale chipselects

[ Upstream commit 71b8f600b034c7f5780f6fb311dabfe331c64feb ]

We have a special quirk to handle the Freescale
nonstandard SPI chipselect GPIOs in the gpiolib-of.c
file, but it currently only handles the case where
the GPIOs are actually requested (gpiod_*get()).

We also need to handle that the SPI core attempts
to count the GPIOs before use, and that needs a
similar quirk in the OF part of the library.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-2-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fsl: Fix GPIO descriptor support

[ Upstream commit f106904968e2a075e64653b9b79dda9f0f070ab5 ]

This makes the driver actually support looking up GPIO
descriptor. A coding mistake in the initial descriptor
support patch was that it was failing to turn on the very
feature it was implementing. Mea culpa.

Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: max98090: fix possible race conditions

[ Upstream commit 45dfbf56975994822cce00b7475732a49f8aefed ]

max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:

Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.

max98090_interrupt      max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
                        restart max98090 codec
receive ULK INT
                        assert ULK == 0
schedule max98090_pll_work (1).

In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.

max98090_interrupt      max98090_pll_work      max98090 codec
----------------------------------------------------------------------
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
schedule max98090_pll_work
                        restart max98090 codec
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
                        read 0x01
                        assert ULK == 0 (2).

In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register.  max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.

There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.

Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously.  Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.

Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler.  However, it could only punish the jack detection by extra
10~12 msec.

Adopts option B which is the better solution overall.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: fix use after free issue

[ Upstream commit 4affd79a125ac91e6a53be843ea3960a8fc00cbb ]

This is caused by dereferencing 'rdev' after put_device() in
the _regulator_get()/_regulator_put() functions.
This patch just moves the put_device() down a bit to avoid the
issue.

Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191124145835.25999-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pxa2xx: Add support for Intel Jasper Lake

[ Upstream commit 9c7315c9fca5de203538163cf42699bb10328902 ]

LPSS SPI on Intel Jasper Lake is compatible with Intel Ice Lake which
follows Intel Cannon Lake. Add PCI IDs of Jasper Lake.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20191125125159.15404-1-jarkko.nikula@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5682: fix i2c arbitration lost issue

[ Upstream commit bc094709de0192a756c6946a7c89c543243ae609 ]

This patch modified the HW initial setting to fix i2c arbitration lost issue.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191125091940.11953-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix passing modified ctx to ld/abs/ind instruction

commit 6d4f151acf9a4f6fab09b615f246c717ddedcf0c upstream.

Anatoly has been fuzzing with kBdysch harness and reported a KASAN
slab oob in one of the outcomes:

  [...]
  [   77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406
  [   77.361119]
  [   77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1
  [   77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  [   77.362984] Call Trace:
  [   77.363249]  dump_stack+0x97/0xe0
  [   77.363603]  print_address_description.constprop.0+0x1d/0x220
  [   77.364251]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365030]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.365860]  __kasan_report.cold+0x37/0x7b
  [   77.366365]  ? bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.366940]  kasan_report+0xe/0x20
  [   77.367295]  bpf_skb_load_helper_8_no_cache+0x71/0x130
  [   77.367821]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.368278]  ? mark_lock+0xa3/0x9b0
  [   77.368641]  ? kvm_sched_clock_read+0x14/0x30
  [   77.369096]  ? sched_clock+0x5/0x10
  [   77.369460]  ? sched_clock_cpu+0x18/0x110
  [   77.369876]  ? bpf_skb_load_helper_8+0xf0/0xf0
  [   77.370330]  ___bpf_prog_run+0x16c0/0x28f0
  [   77.370755]  __bpf_prog_run32+0x83/0xc0
  [   77.371153]  ? __bpf_prog_run64+0xc0/0xc0
  [   77.371568]  ? match_held_lock+0x1b/0x230
  [   77.371984]  ? rcu_read_lock_held+0xa1/0xb0
  [   77.372416]  ? rcu_is_watching+0x34/0x50
  [   77.372826]  sk_filter_trim_cap+0x17c/0x4d0
  [   77.373259]  ? sock_kzfree_s+0x40/0x40
  [   77.373648]  ? __get_filter+0x150/0x150
  [   77.374059]  ? skb_copy_datagram_from_iter+0x80/0x280
  [   77.374581]  ? do_raw_spin_unlock+0xa5/0x140
  [   77.375025]  unix_dgram_sendmsg+0x33a/0xa70
  [   77.375459]  ? do_raw_spin_lock+0x1d0/0x1d0
  [   77.375893]  ? unix_peer_get+0xa0/0xa0
  [   77.376287]  ? __fget_light+0xa4/0xf0
  [   77.376670]  __sys_sendto+0x265/0x280
  [   77.377056]  ? __ia32_sys_getpeername+0x50/0x50
  [   77.377523]  ? lock_downgrade+0x350/0x350
  [   77.377940]  ? __sys_setsockopt+0x2a6/0x2c0
  [   77.378374]  ? sock_read_iter+0x240/0x240
  [   77.378789]  ? __sys_socketpair+0x22a/0x300
  [   77.379221]  ? __ia32_sys_socket+0x50/0x50
  [   77.379649]  ? mark_held_locks+0x1d/0x90
  [   77.380059]  ? trace_hardirqs_on_thunk+0x1a/0x1c
  [   77.380536]  __x64_sys_sendto+0x74/0x90
  [   77.380938]  do_syscall_64+0x68/0x2a0
  [   77.381324]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [   77.381878] RIP: 0033:0x44c070
  [...]

After further debugging, turns out while in case of other helper functions
we disallow passing modified ctx, the special case of ld/abs/ind instruction
which has similar semantics (except r6 being the ctx argument) is missing
such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache()
and others are expecting skb fields in original position, hence, add
check_ctx_reg() to reject any modified ctx. Issue was first introduced back
in f1174f77b50c ("bpf/verifier: rework value tracking").

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein

commit 6dabeb891c001c592645df2f477fed9f5d959987 upstream.

Commit fea3409112a9 ("USB: add direction bit to urb->transfer_flags") has
added a usb_urb_dir_in() helper function that can be used to determine
the direction of the URB. With that patch USB_DIR_IN control requests with
wLength == 0 are considered out requests by real USB HCDs. This patch
changes dummy-hcd to use the usb_urb_dir_in() helper to match that
behavior.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/4ae9e68ebca02f08a93ac61fe065057c9a01f0a8.1571667489.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.10

powerpc/pmem: Fix kernel crash due to wrong range value usage in flush_dcache_range

commit 6f4679b956741d2da6ad3ebb738cbe1264ac8781 upstream.

This patch fix the below kernel crash.

 BUG: Unable to handle kernel data access on read at 0xc000000380000000
 Faulting instruction address: 0xc00000000008b6f0
cpu 0x5: Vector: 300 (Data Access) at [c0000000d8587790]
    pc: c00000000008b6f0: arch_remove_memory+0x150/0x210
    lr: c00000000008b720: arch_remove_memory+0x180/0x210
    sp: c0000000d8587a20
   msr: 800000000280b033
   dar: c000000380000000
 dsisr: 40000000
  current = 0xc0000000d8558600
  paca    = 0xc00000000fff8f00   irqmask: 0x03   irq_happened: 0x01
    pid   = 1220, comm = ndctl
enter ? for help
 memunmap_pages+0x33c/0x410
 devm_action_release+0x30/0x50
 release_nodes+0x30c/0x3a0
 device_release_driver_internal+0x178/0x240
 unbind_store+0x74/0x190
 drv_attr_store+0x44/0x60
 sysfs_kf_write+0x74/0xa0
 kernfs_fop_write+0x1b0/0x260
 __vfs_write+0x3c/0x70
 vfs_write+0xe4/0x200
 ksys_write+0x7c/0x140
 system_call+0x5c/0x68

Fixes: 076265907cf9 ("powerpc: Chunk calls to flush_dcache_range in arch_*_memory")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204052909.59145-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.9

mm/hugetlb: defer freeing of huge pages if in non-task context

[ Upstream commit c77c0a8ac4c522638a8242fcb9de9496e3cdbb2d ]

The following lockdep splat was observed when a certain hugetlbfs test
was run:

  ================================
  WARNING: inconsistent lock state
  4.18.0-159.el8.x86_64+debug #1 Tainted: G        W --------- -  -
  --------------------------------
  inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
  swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0
  {SOFTIRQ-ON-W} state was registered at:
    lock_acquire+0x14f/0x3b0
    _raw_spin_lock+0x30/0x70
    __nr_hugepages_store_common+0x11b/0xb30
    hugetlb_sysctl_handler_common+0x209/0x2d0
    proc_sys_call_handler+0x37f/0x450
    vfs_write+0x157/0x460
    ksys_write+0xb8/0x170
    do_syscall_64+0xa5/0x4d0
    entry_SYSCALL_64_after_hwframe+0x6a/0xdf
  irq event stamp: 691296
  hardirqs last  enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60
  hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81
  softirqs last  enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0
  softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(hugetlb_lock);
    <Interrupt>
      lock(hugetlb_lock);

   *** DEADLOCK ***
      :
  Call Trace:
   <IRQ>
   __lock_acquire+0x146b/0x48c0
   lock_acquire+0x14f/0x3b0
   _raw_spin_lock+0x30/0x70
   free_huge_page+0x36f/0xaa0
   bio_check_pages_dirty+0x2fc/0x5c0
   clone_endio+0x17f/0x670 [dm_mod]
   blk_update_request+0x276/0xe50
   scsi_end_request+0x7b/0x6a0
   scsi_io_completion+0x1c6/0x1570
   blk_done_softirq+0x22e/0x350
   __do_softirq+0x23d/0xad8
   irq_exit+0x23e/0x2b0
   do_IRQ+0x11a/0x200
   common_interrupt+0xf/0xf
   </IRQ>

Both the hugetbl_lock and the subpool lock can be acquired in
free_huge_page().  One way to solve the problem is to make both locks
irq-safe.  However, Mike Kravetz had learned that the hugetlb_lock is
held for a linear scan of ALL hugetlb pages during a cgroup reparentling
operation.  So it is just too long to have irq disabled unless we can
break hugetbl_lock down into finer-grained locks with shorter lock hold
times.

Another alternative is to defer the freeing to a workqueue job.  This
patch implements the deferred freeing by adding a free_hpage_workfn()
work function to do the actual freeing.  The free_huge_page() call in a
non-task context saves the page to be freed in the hpage_freelist linked
list in a lockless manner using the llist APIs.

The generic workqueue is used to process the work, but a dedicated
workqueue can be used instead if it is desirable to have the huge page
freed ASAP.

Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of
llist APIs which simplfy the code.

Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: fix a race condition in node list insertion and deletion

[ Upstream commit 92a35678ec075100ce666a2fb6969151affb0e5d ]

hsr nodes are protected by RCU and there is no write side lock.
But node insertions and deletions could be being operated concurrently.
So write side locking is needed.

Test commands:
    ip netns add nst
    ip link add veth0 type veth peer name veth1
    ip link add veth2 type veth peer name veth3
    ip link set veth1 netns nst
    ip link set veth3 netns nst
    ip link set veth0 up
    ip link set veth2 up
    ip link add hsr0 type hsr slave1 veth0 slave2 veth2
    ip a a 192.168.100.1/24 dev hsr0
    ip link set hsr0 up
    ip netns exec nst ip link set veth1 up
    ip netns exec nst ip link set veth3 up
    ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3
    ip netns exec nst ip a a 192.168.100.2/24 dev hsr1
    ip netns exec nst ip link set hsr1 up

    for i in {0..9}
    do
        for j in {0..9}
do
    for k in {0..9}
    do
        for l in {0..9}
do
        arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 &
done
    done
done
    done

Splat looks like:
[  236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0.
[  236.069617][ T3286] ------------[ cut here ]------------
[  236.070545][ T3286] kernel BUG at lib/list_debug.c:25!
[  236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G        W         5.5.0-rc1+ #209
[  236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0
[  236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b
[  236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286
[  236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000
[  236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf
[  236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9
[  236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28
[  236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02
[  236.138967][ T3286] FS:  00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[  236.144852][ T3286] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0
[  236.146776][ T3286] Call Trace:
[  236.147222][ T3286]  hsr_add_node+0x314/0x490 [hsr]
[  236.153633][ T3286]  hsr_forward_skb+0x2b6/0x1bc0 [hsr]
[  236.154362][ T3286]  ? rcu_read_lock_sched_held+0x90/0xc0
[  236.155091][ T3286]  ? rcu_read_lock_bh_held+0xa0/0xa0
[  236.156607][ T3286]  hsr_dev_xmit+0x70/0xd0 [hsr]
[  236.157254][ T3286]  dev_hard_start_xmit+0x160/0x740
[  236.157941][ T3286]  __dev_queue_xmit+0x1961/0x2e10
[  236.158565][ T3286]  ? netdev_core_pick_tx+0x2e0/0x2e0
[ ... ]

Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: fix error handling routine in hsr_dev_finalize()

[ Upstream commit 1d19e2d53e8ed9e4c98fc95e0067492cda7288b0 ]

hsr_dev_finalize() is called to create new hsr interface.
There are some wrong error handling codes.

1. wrong checking return value of debugfs_create_{dir/file}.
These function doesn't return NULL. If error occurs in there,
it returns error pointer.
So, it should check error pointer instead of NULL.

2. It doesn't unregister interface if it fails to setup hsr interface.
If it fails to initialize hsr interface after register_netdevice(),
it should call unregister_netdevice().

3. Ignore failure of creation of debugfs
If creating of debugfs dir and file is failed, creating hsr interface
will be failed. But debugfs doesn't affect actual logic of hsr module.
So, ignoring this is more correct and this behavior is more general.

Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: avoid debugfs warning message when module is remove

[ Upstream commit 84bb59d773853bc2dda2ac1ef8474c40eb33a3c6 ]

When hsr module is being removed, debugfs_remove() is called to remove
both debugfs directory and file.

When module is being removed, module state is changed to
MODULE_STATE_GOING then exit() is called.
At this moment, module couldn't be held so try_module_get()
will be failed.

debugfs's open() callback tries to hold the module if .owner is existing.
If it fails, warning message is printed.

CPU0 CPU1
delete_module()
    try_stop_module()
    hsr_exit() open() <-- WARNING
        debugfs_remove()

In order to avoid the warning message, this patch makes hsr module does
not set .owner. Unsetting .owner is safe because these are protected by
inode_lock().

Test commands:
    #SHELL1
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    while :
    do
        ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1
modprobe -rv hsr
    done

    #SHELL2
    while :
    do
        cat /sys/kernel/debug/hsr0/node_table
    done

Splat looks like:
[  101.223783][ T1271] ------------[ cut here ]------------
[  101.230309][ T1271] debugfs file owner did not clean up at exit: node_table
[  101.230380][ T1271] WARNING: CPU: 3 PID: 1271 at fs/debugfs/file.c:309 full_proxy_open+0x10f/0x650
[  101.233153][ T1271] Modules linked in: hsr(-) dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_d]
[  101.237112][ T1271] CPU: 3 PID: 1271 Comm: cat Tainted: G        W         5.5.0-rc1+ #204
[  101.238270][ T1271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  101.240379][ T1271] RIP: 0010:full_proxy_open+0x10f/0x650
[  101.241166][ T1271] Code: 48 c1 ea 03 80 3c 02 00 0f 85 c1 04 00 00 49 8b 3c 24 e8 04 86 7e ff 84 c0 75 2d 4c 8
[  101.251985][ T1271] RSP: 0018:ffff8880ca22fa38 EFLAGS: 00010286
[  101.273355][ T1271] RAX: dffffc0000000008 RBX: ffff8880cc6e6200 RCX: 0000000000000000
[  101.274466][ T1271] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8880c4dd5c14
[  101.275581][ T1271] RBP: 0000000000000000 R08: fffffbfff2922f5d R09: 0000000000000000
[  101.276733][ T1271] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffffc0551bc0
[  101.277853][ T1271] R13: ffff8880c4059a48 R14: ffff8880be50a5e0 R15: ffffffff941adaa0
[  101.278956][ T1271] FS:  00007f8871cda540(0000) GS:ffff8880da800000(0000) knlGS:0000000000000000
[  101.280216][ T1271] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  101.282832][ T1271] CR2: 00007f88717cfd10 CR3: 00000000b9440005 CR4: 00000000000606e0
[  101.283974][ T1271] Call Trace:
[  101.285328][ T1271]  do_dentry_open+0x63c/0xf50
[  101.286077][ T1271]  ? open_proxy_open+0x270/0x270
[  101.288271][ T1271]  ? __x64_sys_fchdir+0x180/0x180
[  101.288987][ T1271]  ? inode_permission+0x65/0x390
[  101.289682][ T1271]  path_openat+0x701/0x2810
[  101.290294][ T1271]  ? path_lookupat+0x880/0x880
[  101.290957][ T1271]  ? check_chain_key+0x236/0x5d0
[  101.291676][ T1271]  ? __lock_acquire+0xdfe/0x3de0
[  101.292358][ T1271]  ? sched_clock+0x5/0x10
[  101.292962][ T1271]  ? sched_clock_cpu+0x18/0x170
[  101.293644][ T1271]  ? find_held_lock+0x39/0x1d0
[  101.305616][ T1271]  do_filp_open+0x17a/0x270
[  101.306061][ T1271]  ? may_open_dev+0xc0/0xc0
[ ... ]

Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate lockless accesses to sk->sk_pacing_shift

[ Upstream commit 7c68fa2bddda6d942bd387c9ba5b4300737fd991 ]

sk->sk_pacing_shift can be read and written without lock
synchronization. This patch adds annotations to
document this fact and avoid future syzbot complains.

This might also avoid unexpected false sharing
in sk_pacing_shift_update(), as the compiler
could remove the conditional check and always
write over sk->sk_pacing_shift :

if (sk->sk_pacing_shift != val)
sk->sk_pacing_shift = val;

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/bts: Fix the use of page_private()

[ Upstream commit ff61541cc6c1962957758ba433c574b76f588d23 ]

Commit

  8062382c8dbe2 ("perf/x86/intel/bts: Add BTS PMU driver")

brought in a warning with the BTS buffer initialization
that is easily tripped with (assuming KPTI is disabled):

instantly throwing:

> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 326 at arch/x86/events/intel/bts.c:86 bts_buffer_setup_aux+0x117/0x3d0
> Modules linked in:
> CPU: 2 PID: 326 Comm: perf Not tainted 5.4.0-rc8-00291-gceb9e77324fa #904
> RIP: 0010:bts_buffer_setup_aux+0x117/0x3d0
> Call Trace:
>  rb_alloc_aux+0x339/0x550
>  perf_mmap+0x607/0xc70
>  mmap_region+0x76b/0xbd0
...

It appears to assume (for lost raisins) that PagePrivate() is set,
while later it actually tests for PagePrivate() before using
page_private().

Make it consistent and always check PagePrivate() before using
page_private().

Fixes: 8062382c8dbe2 ("perf/x86/intel/bts: Add BTS PMU driver")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20191205142853.28894-2-alexander.shishkin@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: Don't attempt to map RCI2 config table if it doesn't exist

[ Upstream commit a470552ee8965da0fe6fd4df0aa39c4cda652c7c ]

Commit:

  1c5fecb61255aa12 ("efi: Export Runtime Configuration Interface table to sysfs")

... added support for a Dell specific UEFI configuration table, but
failed to take into account that mapping the table should not be
attempted unless the table actually exists. If it doesn't exist,
the code usually fails silently unless pr_debug() prints are
enabled. However, on 32-bit PAE x86, the splat below is produced due
to the attempt to map the placeholder value EFI_INVALID_TABLE_ADDR
which we use for non-existing UEFI configuration tables, and which
equals ULONG_MAX.

   memremap attempted on mixed range 0x00000000ffffffff size: 0x1e
   WARNING: CPU: 1 PID: 1 at kernel/iomem.c:81 memremap+0x1a3/0x1c0
   Modules linked in:
   CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.2-smp-mine #1
   Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.61 03/05/2018
   EIP: memremap+0x1a3/0x1c0
  ...
   Call Trace:
    ? map_properties+0x473/0x473
    ? efi_rci2_sysfs_init+0x2c/0x154
    ? map_properties+0x473/0x473
    ? do_one_initcall+0x49/0x1d4
    ? parse_args+0x1e8/0x2a0
    ? do_early_param+0x7a/0x7a
    ? kernel_init_freeable+0x139/0x1c2
    ? rest_init+0x8e/0x8e
    ? kernel_init+0xd/0xf2
    ? ret_from_fork+0x2e/0x38

Fix this by checking whether the table exists before attempting to map it.

Reported-by: Richard Narron <comet.berkeley@gmail.com>
Tested-by: Richard Narron <comet.berkeley@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Fixes: 1c5fecb61255aa12 ("efi: Export Runtime Configuration Interface table to sysfs")
Link: https://lkml.kernel.org/r/20191210090945.11501-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/ubsan: don't serialize UBSAN report

[ Upstream commit ce5c31db3645b649a31044a4d8b6057f6c723702 ]

At the moment, UBSAN report will be serialized using a spin_lock().  On
RT-systems, spinlocks are turned to rt_spin_lock and may sleep.  This
will result to the following splat if the undefined behavior is in a
context that can sleep:

  BUG: sleeping function called from invalid context at /src/linux/kernel/locking/rtmutex.c:968
  in_atomic(): 1, irqs_disabled(): 128, pid: 3447, name: make
  1 lock held by make/3447:
   #0: 000000009a966332 (&mm->mmap_sem){++++}, at: do_page_fault+0x140/0x4f8
  irq event stamp: 6284
  hardirqs last  enabled at (6283): [<ffff000011326520>] _raw_spin_unlock_irqrestore+0x90/0xa0
  hardirqs last disabled at (6284): [<ffff0000113262b0>] _raw_spin_lock_irqsave+0x30/0x78
  softirqs last  enabled at (2430): [<ffff000010088ef8>] fpsimd_restore_current_state+0x60/0xe8
  softirqs last disabled at (2427): [<ffff000010088ec0>] fpsimd_restore_current_state+0x28/0xe8
  Preemption disabled at:
  [<ffff000011324a4c>] rt_mutex_futex_unlock+0x4c/0xb0
  CPU: 3 PID: 3447 Comm: make Tainted: G        W         5.2.14-rt7-01890-ge6e057589653 #911
  Call trace:
    dump_backtrace+0x0/0x148
    show_stack+0x14/0x20
    dump_stack+0xbc/0x104
    ___might_sleep+0x154/0x210
    rt_spin_lock+0x68/0xa0
    ubsan_prologue+0x30/0x68
    handle_overflow+0x64/0xe0
    __ubsan_handle_add_overflow+0x10/0x18
    __lock_acquire+0x1c28/0x2a28
    lock_acquire+0xf0/0x370
    _raw_spin_lock_irqsave+0x58/0x78
    rt_mutex_futex_unlock+0x4c/0xb0
    rt_spin_unlock+0x28/0x70
    get_page_from_freelist+0x428/0x2b60
    __alloc_pages_nodemask+0x174/0x1708
    alloc_pages_vma+0x1ac/0x238
    __handle_mm_fault+0x4ac/0x10b0
    handle_mm_fault+0x1d8/0x3b0
    do_page_fault+0x1c8/0x4f8
    do_translation_fault+0xb8/0xe0
    do_mem_abort+0x3c/0x98
    el0_da+0x20/0x24

The spin_lock() will protect against multiple CPUs to output a report
together, I guess to prevent them from being interleaved.  However, they
can still interleave with other messages (and even splat from
__might_sleep).

So the lock usefulness seems pretty limited.  Rather than trying to
accomodate RT-system by switching to a raw_spin_lock(), the lock is now
completely dropped.

Link: http://lkml.kernel.org/r/20190920100835.14999-1-julien.grall@arm.com
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reported-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/blkback: Avoid unmapping unmapped grant pages

[ Upstream commit f9bd84a8a845d82f9b5a081a7ae68c98a11d2e84 ]

For each I/O request, blkback first maps the foreign pages for the
request to its local pages.  If an allocation of a local page for the
mapping fails, it should unmap every mapping already made for the
request.

However, blkback's handling mechanism for the allocation failure does
not mark the remaining foreign pages as unmapped.  Therefore, the unmap
function merely tries to unmap every valid grant page for the request,
including the pages not mapped due to the allocation failure.  On a
system that fails the allocation frequently, this problem leads to
following kernel crash.

  [  372.012538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
  [  372.012546] IP: [<ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40
  [  372.012557] PGD 16f3e9067 PUD 16426e067 PMD 0
  [  372.012562] Oops: 0002 [#1] SMP
  [  372.012566] Modules linked in: act_police sch_ingress cls_u32
  ...
  [  372.012746] Call Trace:
  [  372.012752]  [<ffffffff81407204>] gnttab_unmap_refs+0x34/0x40
  [  372.012759]  [<ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback]
  ...
  [  372.012802]  [<ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback]
  ...
  Decompressing Linux... Parsing ELF... done.
  Booting the kernel.
  [    0.000000] Initializing cgroup subsys cpuset

This commit fixes this problem by marking the grant pages of the given
request that didn't mapped due to the allocation failure as invalid.

Fixes: c6cc142dac52 ("xen-blkback: use balloon pages for all mappings")

Reviewed-by: David Woodhouse <dwmw@amazon.de>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Paul Durrant <pdurrant@amazon.co.uk>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/sparse.c: mark populate_section_memmap as __meminit

[ Upstream commit 030eab4f9ffb469344c10a46bc02c5149db0a2a9 ]

Building the kernel on s390 with -Og produces the following warning:

  WARNING: vmlinux.o(.text+0x28dabe): Section mismatch in reference from the function populate_section_memmap() to the function .meminit.text:__populate_section_memmap()
  The function populate_section_memmap() references
  the function __meminit __populate_section_memmap().
  This is often because populate_section_memmap lacks a __meminit
  annotation or the annotation of __populate_section_memmap is wrong.

While -Og is not supported, in theory this might still happen with
another compiler or on another architecture.  So fix this by using the
correct section annotations.

[iii@linux.ibm.com: v2]
Link: http://lkml.kernel.org/r/20191030151639.41486-1-iii@linux.ibm.com
Link: http://lkml.kernel.org/r/20191028165549.14478-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/smp: fix physical to logical CPU map for SMT

[ Upstream commit 72a81ad9d6d62dcb79f7e8ad66ffd1c768b72026 ]

If an SMT capable system is not IPL'ed from the first CPU the setup of
the physical to logical CPU mapping is broken: the IPL core gets CPU
number 0, but then the next core gets CPU number 1. Correct would be
that all SMT threads of CPU 0 get the subsequent logical CPU numbers.

This is important since a lot of code (like e.g. the CPU topology
code) assumes that CPU maps are setup like this. If the mapping is
broken the system will not IPL due to broken topology masks:

[    1.716341] BUG: arch topology broken
[    1.716342]      the SMT domain not a subset of the MC domain
[    1.716343] BUG: arch topology broken
[    1.716344]      the MC domain not a subset of the BOOK domain

This scenario can usually not happen since LPARs are always IPL'ed
from CPU 0 and also re-IPL is intiated from CPU 0. However older
kernels did initiate re-IPL on an arbitrary CPU. If therefore a re-IPL
from an old kernel into a new kernel is initiated this may lead to
crash.

Fix this by setting up the physical to logical CPU mapping correctly.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: only associate the locked page with one async_chunk struct

[ Upstream commit 1d53c9e6723022b12e4a5ed4b141f67c834b7f6f ]

The btrfs writepages function collects a large range of pages flagged
for delayed allocation, and then sends them down through the COW code
for processing.  When compression is on, we allocate one async_chunk
structure for every 512K, and then run those pages through the
compression code for IO submission.

writepages starts all of this off with a single page, locked by the
original call to extent_write_cache_pages(), and it's important to keep
track of this page because it has already been through
clear_page_dirty_for_io().

The btrfs async_chunk struct has a pointer to the locked_page, and when
we're redirtying the page because compression had to fallback to
uncompressed IO, we use page->index to decide if a given async_chunk
struct really owns that page.

But, this is racey.  If a given delalloc range is broken up into two
async_chunks (chunkA and chunkB), we can end up with something like
this:

 compress_file_range(chunkA)
 submit_compress_extents(chunkA)
 submit compressed bios(chunkA)
 put_page(locked_page)

 compress_file_range(chunkB)
 ...

Or:

 async_cow_submit
  submit_compressed_extents <--- falls back to buffered writeout
   cow_file_range
    extent_clear_unlock_delalloc
     __process_pages_contig
       put_page(locked_pages)

    async_cow_submit

The end result is that chunkA is completed and cleaned up before chunkB
even starts processing.  This means we can free locked_page() and reuse
it elsewhere.  If we get really lucky, it'll have the same page->index
in its new home as it did before.

While we're processing chunkB, we might decide we need to fall back to
uncompressed IO, and so compress_file_range() will call
__set_page_dirty_nobufers() on chunkB->locked_page.

Without cgroups in use, this creates as a phantom dirty page, which
isn't great but isn't the end of the world. What can happen, it can go
through the fixup worker and the whole COW machinery again:

in submit_compressed_extents():
  while (async extents) {
  ...
    cow_file_range
    if (!page_started ...)
      extent_write_locked_range
    else if (...)
      unlock_page
    continue;

This hasn't been observed in practice but is still possible.

With cgroups in use, we might crash in the accounting code because
page->mapping->i_wb isn't set.

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
  IP: percpu_counter_add_batch+0x11/0x70
  PGD 66534e067 P4D 66534e067 PUD 66534f067 PMD 0
  Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
  CPU: 16 PID: 2172 Comm: rm Not tainted
  RIP: 0010:percpu_counter_add_batch+0x11/0x70
  RSP: 0018:ffffc9000a97bbe0 EFLAGS: 00010286
  RAX: 0000000000000005 RBX: 0000000000000090 RCX: 0000000000026115
  RDX: 0000000000000030 RSI: ffffffffffffffff RDI: 0000000000000090
  RBP: 0000000000000000 R08: fffffffffffffff5 R09: 0000000000000000
  R10: 00000000000260c0 R11: ffff881037fc26c0 R12: ffffffffffffffff
  R13: ffff880fe4111548 R14: ffffc9000a97bc90 R15: 0000000000000001
  FS:  00007f5503ced480(0000) GS:ffff880ff7200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000d0 CR3: 00000001e0459005 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   account_page_cleaned+0x15b/0x1f0
   __cancel_dirty_page+0x146/0x200
   truncate_cleanup_page+0x92/0xb0
   truncate_inode_pages_range+0x202/0x7d0
   btrfs_evict_inode+0x92/0x5a0
   evict+0xc1/0x190
   do_unlinkat+0x176/0x280
   do_syscall_64+0x63/0x1a0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7

The fix here is to make asyc_chunk->locked_page NULL everywhere but the
one async_chunk struct that's allowed to do things to the locked page.

Link: https://lore.kernel.org/linux-btrfs/c2419d01-5c84-3fb4-189e-4db519d08796@suse.com/
Fixes: 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
[ update changelog from mail thread discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: get rid of unique workqueue helper functions

[ Upstream commit a0cac0ec961f0d42828eeef196ac2246a2f07659 ]

Commit 9e0af2376434 ("Btrfs: fix task hang under heavy compressed
write") worked around the issue that a recycled work item could get a
false dependency on the original work item due to how the workqueue code
guarantees non-reentrancy. It did so by giving different work functions
to different types of work.

However, the fixes in the previous few patches are more complete, as
they prevent a work item from being recycled at all (except for a tiny
window that the kernel workqueue code handles for us). This obsoletes
the previous fix, so we don't need the unique helpers for correctness.
The only other reason to keep them would be so they show up in stack
traces, but they always seem to be optimized to a tail call, so they
don't show up anyways. So, let's just get rid of the extra indirection.

While we're here, rename normal_work_helper() to the more informative
btrfs_work_helper().

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps

[ Upstream commit 6abf57262166b4f4294667fb5206ae7ba1ba96f5 ]

Running stress-test test_2 in mtd-utils on ubi device, sometimes we can
get following oops message:

  BUG: unable to handle page fault for address: ffffffff00000140
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 280a067 P4D 280a067 PUD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0
  -0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  Workqueue: writeback wb_workfn (flush-ubifs_0_0)
  RIP: 0010:rb_next_postorder+0x2e/0xb0
  Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db
  03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a
  10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03
  RSP: 0018:ffffc90000887758 EFLAGS: 00010202
  RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001
  RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400
  RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000
  R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000
  R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8
  FS:  0000000000000000(0000) GS:ffff88813ba00000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
    destroy_old_idx+0x5d/0xa0 [ubifs]
    ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs]
    do_commit+0x3eb/0x830 [ubifs]
    ubifs_run_commit+0xdc/0x1c0 [ubifs]

Above Oops are due to the slab-out-of-bounds happened in do-while of
function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In
function layout_in_gaps, there is a do-while loop placing index nodes
into the gaps created by obsolete index nodes in non-empty index LEBs
until rest index nodes can totally be placed into pre-allocated empty
LEBs. @c->gap_lebs points to a memory area(integer array) which records
LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB
is found, corresponding lnum will be incrementally written into the
memory area pointed by @c->gap_lebs. The size
((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before
do-while loop and can not be changed in the loop. But @c->lst.idx_lebs
could be increased by function ubifs_change_lp (called by
layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the
loop. So, sometimes oob happens when number of cycles in do-while loop
exceeds the original value of @c->lst.idx_lebs. See detail in
https://bugzilla.kernel.org/show_bug.cgi?id=204229.
This patch fixes oob in layout_in_gaps.

Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add annotations on hh->hh_len lockless accesses

[ Upstream commit c305c6ae79e2ce20c22660ceda94f0d86d639a82 ]

KCSAN reported a data-race [1]

While we can use READ_ONCE() on the read sides,
we need to make sure hh->hh_len is written last.

[1]

BUG: KCSAN: data-race in eth_header_cache / neigh_resolve_output

write to 0xffff8880b9dedcb8 of 4 bytes by task 29760 on cpu 0:
 eth_header_cache+0xa9/0xd0 net/ethernet/eth.c:247
 neigh_hh_init net/core/neighbour.c:1463 [inline]
 neigh_resolve_output net/core/neighbour.c:1480 [inline]
 neigh_resolve_output+0x415/0x470 net/core/neighbour.c:1470
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 NF_HOOK include/linux/netfilter.h:305 [inline]
 ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505
 ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647
 rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

read to 0xffff8880b9dedcb8 of 4 bytes by task 29572 on cpu 1:
 neigh_resolve_output net/core/neighbour.c:1479 [inline]
 neigh_resolve_output+0x113/0x470 net/core/neighbour.c:1470
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 NF_HOOK include/linux/netfilter.h:305 [inline]
 ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505
 ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647
 rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 29572 Comm: kworker/1:4 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events rt6_probe_deferred

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: periodically yield scrub threads to the scheduler

[ Upstream commit 5d1116d4c6af3e580f1ed0382ca5a94bd65a34cf ]

Christoph Hellwig complained about the following soft lockup warning
when running scrub after generic/175 when preemption is disabled and
slub debugging is enabled:

watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [xfs_scrub:161]
Modules linked in:
irq event stamp: 41692326
hardirqs last  enabled at (41692325): [<ffffffff8232c3b7>] _raw_0
hardirqs last disabled at (41692326): [<ffffffff81001c5a>] trace0
softirqs last  enabled at (41684994): [<ffffffff8260031f>] __do_e
softirqs last disabled at (41684987): [<ffffffff81127d8c>] irq_e0
CPU: 3 PID: 16189 Comm: xfs_scrub Not tainted 5.4.0-rc3+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.124
RIP: 0010:_raw_spin_unlock_irqrestore+0x39/0x40
Code: 89 f3 be 01 00 00 00 e8 d5 3a e5 fe 48 89 ef e8 ed 87 e5 f2
RSP: 0018:ffffc9000233f970 EFLAGS: 00000286 ORIG_RAX: ffffffffff3
RAX: ffff88813b398040 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000006 RSI: ffff88813b3988c0 RDI: ffff88813b398040
RBP: ffff888137958640 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffea00042b0c00
R13: 0000000000000001 R14: ffff88810ac32308 R15: ffff8881376fc040
FS:  00007f6113dea700(0000) GS:ffff88813bb80000(0000) knlGS:00000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6113de8ff8 CR3: 000000012f290000 CR4: 00000000000006e0
Call Trace:
 free_debug_processing+0x1dd/0x240
 __slab_free+0x231/0x410
 kmem_cache_free+0x30e/0x360
 xchk_ag_btcur_free+0x76/0xb0
 xchk_ag_free+0x10/0x80
 xchk_bmap_iextent_xref.isra.14+0xd9/0x120
 xchk_bmap_iextent+0x187/0x210
 xchk_bmap+0x2e0/0x3b0
 xfs_scrub_metadata+0x2e7/0x500
 xfs_ioc_scrub_metadata+0x4a/0xa0
 xfs_file_ioctl+0x58a/0xcd0
 do_vfs_ioctl+0xa0/0x6f0
 ksys_ioctl+0x5b/0x90
 __x64_sys_ioctl+0x11/0x20
 do_syscall_64+0x4b/0x1a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If preemption is disabled, all metadata buffers needed to perform the
scrub are already in memory, and there are a lot of records to check,
it's possible that the scrub thread will run for an extended period of
time without sleeping for IO or any other reason.  Then the watchdog
timer or the RCU stall timeout can trigger, producing the backtrace
above.

To fix this problem, call cond_resched() from the scrub thread so that
we back out to the scheduler whenever necessary.

Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/execlists: Fix annotation for decoupling virtual request

[ Upstream commit 08ad9a3846fc72b047b110b36d162ffbcf298fa2 ]

As we may signal a request and take the engine->active.lock within the
signaler, the engine submission paths have to use a nested annotation on
their requests -- but we guarantee that we can never submit on the same
engine as the signaling fence.

<4>[  723.763281] WARNING: possible circular locking dependency detected
<4>[  723.763285] 5.3.0-g80fa0e042cdb-drmtip_379+ #1 Tainted: G     U
<4>[  723.763288] ------------------------------------------------------
<4>[  723.763291] gem_exec_await/1388 is trying to acquire lock:
<4>[  723.763294] ffff93a7b53221d8 (&engine->active.lock){..-.}, at: execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.763378]
                  but task is already holding lock:
<4>[  723.763381] ffff93a7c25f6d20 (&i915_request_get(rq)->submit/1){-.-.}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763420]
                  which lock already depends on the new lock.

<4>[  723.763423]
                  the existing dependency chain (in reverse order) is:
<4>[  723.763427]
                  -> #2 (&i915_request_get(rq)->submit/1){-.-.}:
<4>[  723.763434]        _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  723.763478]        __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763513]        intel_engine_breadcrumbs_irq+0x3aa/0x5e0 [i915]
<4>[  723.763600]        cs_irq_handler+0x49/0x50 [i915]
<4>[  723.763659]        gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  723.763690]        gen11_irq_handler+0x54/0xf0 [i915]
<4>[  723.763695]        __handle_irq_event_percpu+0x41/0x2d0
<4>[  723.763699]        handle_irq_event_percpu+0x2b/0x70
<4>[  723.763702]        handle_irq_event+0x2f/0x50
<4>[  723.763706]        handle_edge_irq+0xee/0x1a0
<4>[  723.763709]        do_IRQ+0x7e/0x160
<4>[  723.763712]        ret_from_intr+0x0/0x1d
<4>[  723.763717]        __slab_alloc.isra.28.constprop.33+0x4f/0x70
<4>[  723.763720]        kmem_cache_alloc+0x28d/0x2f0
<4>[  723.763724]        vm_area_dup+0x15/0x40
<4>[  723.763727]        dup_mm+0x2dd/0x550
<4>[  723.763730]        copy_process+0xf21/0x1ef0
<4>[  723.763734]        _do_fork+0x71/0x670
<4>[  723.763737]        __se_sys_clone+0x6e/0xa0
<4>[  723.763741]        do_syscall_64+0x4f/0x210
<4>[  723.763744]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.763747]
                  -> #1 (&(&rq->lock)->rlock#2){-.-.}:
<4>[  723.763752]        _raw_spin_lock+0x2a/0x40
<4>[  723.763789]        __unwind_incomplete_requests+0x3eb/0x450 [i915]
<4>[  723.763825]        __execlists_submission_tasklet+0x9ec/0x1d60 [i915]
<4>[  723.763864]        execlists_submission_tasklet+0x34/0x50 [i915]
<4>[  723.763874]        tasklet_action_common.isra.5+0x47/0xb0
<4>[  723.763878]        __do_softirq+0xd8/0x4ae
<4>[  723.763881]        irq_exit+0xa9/0xc0
<4>[  723.763883]        smp_apic_timer_interrupt+0xb7/0x280
<4>[  723.763887]        apic_timer_interrupt+0xf/0x20
<4>[  723.763892]        cpuidle_enter_state+0xae/0x450
<4>[  723.763895]        cpuidle_enter+0x24/0x40
<4>[  723.763899]        do_idle+0x1e7/0x250
<4>[  723.763902]        cpu_startup_entry+0x14/0x20
<4>[  723.763905]        start_secondary+0x15f/0x1b0
<4>[  723.763908]        secondary_startup_64+0xa4/0xb0
<4>[  723.763911]
                  -> #0 (&engine->active.lock){..-.}:
<4>[  723.763916]        __lock_acquire+0x15d8/0x1ea0
<4>[  723.763919]        lock_acquire+0xa6/0x1c0
<4>[  723.763922]        _raw_spin_lock_irqsave+0x33/0x50
<4>[  723.763956]        execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.764002]        submit_notify+0xa8/0x13c [i915]
<4>[  723.764035]        __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[  723.764054]        i915_sw_fence_wake+0x51/0x64 [i915]
<4>[  723.764054]        __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[  723.764054]        dma_i915_sw_fence_wake_timer+0x14/0x20 [i915]
<4>[  723.764054]        dma_fence_signal_locked+0x9e/0x1c0
<4>[  723.764054]        dma_fence_signal+0x1f/0x40
<4>[  723.764054]        vgem_fence_signal_ioctl+0x67/0xc0 [vgem]
<4>[  723.764054]        drm_ioctl_kernel+0x83/0xf0
<4>[  723.764054]        drm_ioctl+0x2f3/0x3b0
<4>[  723.764054]        do_vfs_ioctl+0xa0/0x6f0
<4>[  723.764054]        ksys_ioctl+0x35/0x60
<4>[  723.764054]        __x64_sys_ioctl+0x11/0x20
<4>[  723.764054]        do_syscall_64+0x4f/0x210
<4>[  723.764054]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.764054]
                  other info that might help us debug this:

<4>[  723.764054] Chain exists of:
                    &engine->active.lock --> &(&rq->lock)->rlock#2 --> &i915_request_get(rq)->submit/1

<4>[  723.764054]  Possible unsafe locking scenario:

<4>[  723.764054]        CPU0                    CPU1
<4>[  723.764054]        ----                    ----
<4>[  723.764054]   lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]                                lock(&(&rq->lock)->rlock#2);
<4>[  723.764054]                                lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]   lock(&engine->active.lock);
<4>[  723.764054]
                   *** DEADLOCK ***

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111862
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004194758.19679-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: Discard undersized packets

[ Upstream commit cd486e627e67ee9ab66914d36d3127ef057cc010 ]

Sometimes the hardware will push small packets that trigger a WARN_ON
in mac80211. Discard them early to avoid this issue.

This patch ports 2 patches from ath9k to ath9k_htc.
commit 3c0efb745a172bfe96459e20cbd37b0c945d5f8d "ath9k: discard
undersized packets".
commit df5c4150501ee7e86383be88f6490d970adcf157 "ath9k: correctly
handle short radar pulses".

[  112.835889] ------------[ cut here ]------------
[  112.835971] WARNING: CPU: 5 PID: 0 at net/mac80211/rx.c:804 ieee80211_rx_napi+0xaac/0xb40 [mac80211]
[  112.835973] Modules linked in: ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 libarc4 nouveau snd_hda_codec_hdmi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_hda_codec video snd_hda_core ttm snd_hwdep drm_kms_helper snd_pcm crct10dif_pclmul snd_seq_midi drm snd_seq_midi_event crc32_pclmul snd_rawmidi ghash_clmulni_intel snd_seq aesni_intel aes_x86_64 crypto_simd cryptd snd_seq_device glue_helper snd_timer sch_fq_codel i2c_algo_bit fb_sys_fops snd input_leds syscopyarea sysfillrect sysimgblt intel_cstate mei_me intel_rapl_perf soundcore mxm_wmi lpc_ich mei kvm_intel kvm mac_hid irqbypass parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear e1000e ahci libahci wmi
[  112.836022] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.3.0-wt #1
[  112.836023] Hardware name: MouseComputer Co.,Ltd. X99-S01/X99-S01, BIOS 1.0C-W7 04/01/2015
[  112.836056] RIP: 0010:ieee80211_rx_napi+0xaac/0xb40 [mac80211]
[  112.836059] Code: 00 00 66 41 89 86 b0 00 00 00 e9 c8 fa ff ff 4c 89 b5 40 ff ff ff 49 89 c6 e9 c9 fa ff ff 48 c7 c7 e0 a2 a5 c0 e8 47 41 b0 e9 <0f> 0b 48 89 df e8 5a 94 2d ea e9 02 f9 ff ff 41 39 c1 44 89 85 60
[  112.836060] RSP: 0018:ffffaa6180220da8 EFLAGS: 00010286
[  112.836062] RAX: 0000000000000024 RBX: ffff909a20eeda00 RCX: 0000000000000000
[  112.836064] RDX: 0000000000000000 RSI: ffff909a2f957448 RDI: ffff909a2f957448
[  112.836065] RBP: ffffaa6180220e78 R08: 00000000000006e9 R09: 0000000000000004
[  112.836066] R10: 000000000000000a R11: 0000000000000001 R12: 0000000000000000
[  112.836068] R13: ffff909a261a47a0 R14: 0000000000000000 R15: 0000000000000004
[  112.836070] FS:  0000000000000000(0000) GS:ffff909a2f940000(0000) knlGS:0000000000000000
[  112.836071] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  112.836073] CR2: 00007f4e3ffffa08 CR3: 00000001afc0a006 CR4: 00000000001606e0
[  112.836074] Call Trace:
[  112.836076]  <IRQ>
[  112.836083]  ? finish_td+0xb3/0xf0
[  112.836092]  ? ath9k_rx_prepare.isra.11+0x22f/0x2a0 [ath9k_htc]
[  112.836099]  ath9k_rx_tasklet+0x10b/0x1d0 [ath9k_htc]
[  112.836105]  tasklet_action_common.isra.22+0x63/0x110
[  112.836108]  tasklet_action+0x22/0x30
[  112.836115]  __do_softirq+0xe4/0x2da
[  112.836118]  irq_exit+0xae/0xb0
[  112.836121]  do_IRQ+0x86/0xe0
[  112.836125]  common_interrupt+0xf/0xf
[  112.836126]  </IRQ>
[  112.836130] RIP: 0010:cpuidle_enter_state+0xa9/0x440
[  112.836133] Code: 3d bc 20 38 55 e8 f7 1d 84 ff 49 89 c7 0f 1f 44 00 00 31 ff e8 28 29 84 ff 80 7d d3 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ed 0f 89 ff 01 00 00 41 c7 44 24 10 00 00 00 00 48 83 c4 18
[  112.836134] RSP: 0018:ffffaa61800e3e48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
[  112.836136] RAX: ffff909a2f96b340 RBX: ffffffffabb58200 RCX: 000000000000001f
[  112.836137] RDX: 0000001a458adc5d RSI: 0000000026c9b581 RDI: 0000000000000000
[  112.836139] RBP: ffffaa61800e3e88 R08: 0000000000000002 R09: 000000000002abc0
[  112.836140] R10: ffffaa61800e3e18 R11: 000000000000002d R12: ffffca617fb40b00
[  112.836141] R13: 0000000000000002 R14: ffffffffabb582d8 R15: 0000001a458adc5d
[  112.836145]  ? cpuidle_enter_state+0x98/0x440
[  112.836149]  ? menu_select+0x370/0x600
[  112.836151]  cpuidle_enter+0x2e/0x40
[  112.836154]  call_cpuidle+0x23/0x40
[  112.836156]  do_idle+0x204/0x280
[  112.836159]  cpu_startup_entry+0x1d/0x20
[  112.836164]  start_secondary+0x167/0x1c0
[  112.836169]  secondary_startup_64+0xa4/0xb0
[  112.836173] ---[ end trace 9f4cd18479cc5ae5 ]---

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: Modify byte order for an error message

[ Upstream commit e01fddc19d215f6ad397894ec2a851d99bf154e2 ]

rs_datalen is be16 so we need to convert it before printing.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fix compat handling of FICLONERANGE, FIDEDUPERANGE and FS_IOC_FIEMAP

commit 6b2daec19094a90435abe67d16fb43b1a5527254 upstream.

Unlike FICLONE, all of those take a pointer argument; they do need
compat_ptr() applied to arg.

Fixes: d79bdd52d8be ("vfs: wire up compat ioctl for CLONE/CLONE_RANGE")
Fixes: 54dbc1517237 ("vfs: hoist the btrfs deduplication ioctl to the vfs")
Fixes: ceac204e1da9 ("fs: make fiemap work from compat_ioctl")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: cifs: Fix atime update check vs mtime

commit 69738cfdfa7032f45d9e7462d24490e61cf163dd upstream.

According to the comment in the code and commit log, some apps
expect atime >= mtime; but the introduced code results in
atime==mtime.  Fix the comparison to guard against atime<mtime.

Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: stfrench@microsoft.com
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix lookup of root ses in DFS referral cache

commit df3df923b31d298c3d3653a0380202b9f2df9864 upstream.

We don't care about module aliasing validation in
cifs_compose_mount_options(..., is_smb3) when finding the root SMB
session of an DFS namespace in order to refresh DFS referral cache.

The following issue has been observed when mounting with '-t smb3' and
then specifying 'vers=2.0':

...
Nov 08 15:27:08 tw kernel: address conversion returned 0 for FS0.WIN.LOCAL
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_query((null),FS0.WIN.LOCAL,13,(null))
Nov 08 15:27:08 tw kernel: [kworke] call request_key(,FS0.WIN.LOCAL,)
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_resolver_cmp(FS0.WIN.LOCAL,FS0.WIN.LOCAL)
Nov 08 15:27:08 tw kernel: [kworke] <== dns_resolver_cmp() = 1
Nov 08 15:27:08 tw kernel: [kworke] <== dns_query() = 13
Nov 08 15:27:08 tw kernel: fs/cifs/dns_resolve.c: dns_resolve_server_name_to_ip: resolved: FS0.WIN.LOCAL to 192.168.30.26
===> Nov 08 15:27:08 tw kernel: CIFS VFS: vers=2.0 not permitted when mounting with smb3
Nov 08 15:27:08 tw kernel: fs/cifs/dfs_cache.c: CIFS VFS: leaving refresh_tcon (xid = 26) rc = -22
...

Fixes: 5072010ccf05 ("cifs: Fix DFS cache refresher for DFS links")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: msm_serial: Fix lockup for sysrq and oops

commit 0e4f7f920a5c6bfe5e851e989f27b35a0cc7fb7e upstream.

As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug")
has mentioned the uart driver might cause recursive locking between
normal printing and the kernel debugging facilities (e.g. sysrq and
oops).  In the commit it gave out suggestion for fixing recursive
locking issue: "The solution is to avoid locking in the sysrq case
and trylock in the oops_in_progress case."

This patch follows the suggestion (also used the exactly same code with
other serial drivers, e.g. amba-pl011.c) to fix the recursive locking
issue, this can avoid stuck caused by deadlock and print out log for
sysrq and oops.

Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq

commit b049e03ca57f238e74a79e44ffc85904db465e72 upstream.

As platform_get_irq() now prints an error when the interrupt does not
exist, a scary warning may be printed for an optional interrupt:

    phy_rcar_gen3_usb2 ee0a0200.usb-phy: IRQ index 0 not found

Fix this by calling platform_get_irq_optional() instead.

Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warning

commit 72c9b5f6f75fbc6c47e0a2d02bc3838a2a47c90a upstream.

usb_otg bus needs to get initialize from the u-boot to be configured
to used as power source to SBC or usb otg port will get configured
as host device. Right now this support is missing in the u-boot and
phy driver so to avoid power failed warning, we would disable this
feature  until proper fix is found.

[    2.716048] phy phy-c0000000.phy.0: USB ID detect failed!
[    2.720186] phy phy-c0000000.phy.0: phy poweron failed --> -22
[    2.726001] ------------[ cut here ]------------
[    2.730583] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8
[    2.738983] Modules linked in:
[    2.742005] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.9-1-ARCH #1
[    2.748643] Hardware name: Hardkernel ODROID-C2 (DT)
[    2.753566] Workqueue: events deferred_probe_work_func
[    2.758649] pstate: 60000005 (nZCv daif -PAN -UAO)
[    2.763394] pc : _regulator_put+0x3c/0xe8
[    2.767361] lr : _regulator_put+0x3c/0xe8
[    2.771326] sp : ffff000011aa3a50
[    2.774604] x29: ffff000011aa3a50 x28: ffff80007ed1b600
[    2.779865] x27: ffff80007f7036a8 x26: ffff80007f7036a8
[    2.785126] x25: 0000000000000000 x24: ffff000011a44458
[    2.790387] x23: ffff000011344218 x22: 0000000000000009
[    2.795649] x21: ffff000011aa3b68 x20: ffff80007ed1b500
[    2.800910] x19: ffff80007ed1b500 x18: 0000000000000010
[    2.806171] x17: 000000005be5943c x16: 00000000f1c73b29
[    2.811432] x15: ffffffffffffffff x14: ffff0000117396c8
[    2.816694] x13: ffff000091aa37a7 x12: ffff000011aa37af
[    2.821955] x11: ffff000011763000 x10: ffff000011aa3730
[    2.827216] x9 : 00000000ffffffd0 x8 : ffff000010871760
[    2.832477] x7 : 00000000000000d0 x6 : ffff0000119d151b
[    2.837739] x5 : 000000000000000f x4 : 0000000000000000
[    2.843000] x3 : 0000000000000000 x2 : 38104b2678c20100
[    2.848261] x1 : 0000000000000000 x0 : 0000000000000024
[    2.853523] Call trace:
[    2.855940]  _regulator_put+0x3c/0xe8
[    2.859562]  regulator_put+0x34/0x48
[    2.863098]  regulator_bulk_free+0x40/0x58
[    2.867153]  devm_regulator_bulk_release+0x24/0x30
[    2.871896]  release_nodes+0x1f0/0x2e0
[    2.875604]  devres_release_all+0x64/0xa4
[    2.879571]  really_probe+0x1c8/0x3e0
[    2.883194]  driver_probe_device+0xe4/0x138
[    2.887334]  __device_attach_driver+0x90/0x110
[    2.891733]  bus_for_each_drv+0x8c/0xd8
[    2.895527]  __device_attach+0xdc/0x160
[    2.899322]  device_initial_probe+0x24/0x30
[    2.903463]  bus_probe_device+0x9c/0xa8
[    2.907258]  deferred_probe_work_func+0xa0/0xf0
[    2.911745]  process_one_work+0x1b4/0x408
[    2.915711]  worker_thread+0x54/0x4b8
[    2.919334]  kthread+0x12c/0x130
[    2.922526]  ret_from_fork+0x10/0x1c
[    2.926060] ---[ end trace 51a68f4c0035d6c0 ]---
[    2.930691] ------------[ cut here ]------------
[    2.935242] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8
[    2.943653] Modules linked in:
[    2.946675] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G        W         5.2.9-1-ARCH #1
[    2.954694] Hardware name: Hardkernel ODROID-C2 (DT)
[    2.959613] Workqueue: events deferred_probe_work_func
[    2.964700] pstate: 60000005 (nZCv daif -PAN -UAO)
[    2.969445] pc : _regulator_put+0x3c/0xe8
[    2.973412] lr : _regulator_put+0x3c/0xe8
[    2.977377] sp : ffff000011aa3a50
[    2.980655] x29: ffff000011aa3a50 x28: ffff80007ed1b600
[    2.985916] x27: ffff80007f7036a8 x26: ffff80007f7036a8
[    2.991177] x25: 0000000000000000 x24: ffff000011a44458
[    2.996439] x23: ffff000011344218 x22: 0000000000000009
[    3.001700] x21: ffff000011aa3b68 x20: ffff80007ed1bd00
[    3.006961] x19: ffff80007ed1bd00 x18: 0000000000000010
[    3.012222] x17: 000000005be5943c x16: 00000000f1c73b29
[    3.017484] x15: ffffffffffffffff x14: ffff0000117396c8
[    3.022745] x13: ffff000091aa37a7 x12: ffff000011aa37af
[    3.028006] x11: ffff000011763000 x10: ffff000011aa3730
[    3.033267] x9 : 00000000ffffffd0 x8 : ffff000010871760
[    3.038528] x7 : 00000000000000fd x6 : ffff0000119d151b
[    3.043790] x5 : 000000000000000f x4 : 0000000000000000
[    3.049051] x3 : 0000000000000000 x2 : 38104b2678c20100
[    3.054312] x1 : 0000000000000000 x0 : 0000000000000024
[    3.059574] Call trace:
[    3.061991]  _regulator_put+0x3c/0xe8
[    3.065613]  regulator_put+0x34/0x48
[    3.069149]  regulator_bulk_free+0x40/0x58
[    3.073203]  devm_regulator_bulk_release+0x24/0x30
[    3.077947]  release_nodes+0x1f0/0x2e0
[    3.081655]  devres_release_all+0x64/0xa4
[    3.085622]  really_probe+0x1c8/0x3e0
[    3.089245]  driver_probe_device+0xe4/0x138
[    3.093385]  __device_attach_driver+0x90/0x110
[    3.097784]  bus_for_each_drv+0x8c/0xd8
[    3.101578]  __device_attach+0xdc/0x160
[    3.105373]  device_initial_probe+0x24/0x30
[    3.109514]  bus_probe_device+0x9c/0xa8
[    3.113309]  deferred_probe_work_func+0xa0/0xf0
[    3.117796]  process_one_work+0x1b4/0x408
[    3.121762]  worker_thread+0x54/0x4b8
[    3.125384]  kthread+0x12c/0x130
[    3.128575]  ret_from_fork+0x10/0x1c
[    3.132110] ---[ end trace 51a68f4c0035d6c1 ]---
[    3.136753] dwc2: probe of c9000000.usb failed with error -22

Fixes: 5a0803bd5ae2 ("ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example

commit 830dbce7c76ea529decac7d23b808c1e7da3d891 upstream.

The documented compatible value for R-Car H3 is
"renesas,r8a7795-rcar-usb2-clock-sel", not
"renesas,r8a77950-rcar-usb2-clock-sel".

Fixes: 311accb64570db45 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191016145650.30003-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usb: fix memory leak in af9005_identify_state

commit 2289adbfa559050d2a38bcd9caac1c18b800e928 upstream.

In af9005_identify_state when returning -EIO the allocated buffer should
be released. Replace the "return -EIO" with assignment into ret and move
deb_info() under a check.

Fixes: af4e067e1dcf ("V4L/DVB (5625): Add support for the AF9005 demodulator from Afatech")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: ab8500: Remove AB8505 USB regulator

commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream.

The USB regulator was removed for AB8500 in
commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator").
It was then added for AB8505 in
commit 547f384f33db ("regulator: ab8500: add support for ab8505").

However, there was never an entry added for it in
ab8505_regulator_match. This causes all regulators after it
to be initialized with the wrong device tree data, eventually
leading to an out-of-bounds array read.

Given that it is not used anywhere in the kernel, it seems
likely that similar arguments against supporting it exist for
AB8505 (it is controlled by hardware).

Therefore, simply remove it like for AB8500 instead of adding
an entry in ab8505_regulator_match.

Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: flexcop-usb: ensure -EIO is returned on error condition

commit 74a96b51a36de4d86660fbc56b05d86668162d6b upstream.

An earlier commit hard coded a return 0 to function flexcop_usb_i2c_req
even though the an -EIO was intended to be returned in the case where
ret != buflen.  Fix this by replacing the return 0 with the return of
ret to return the error return code.

Addresses-Coverity: ("Unused value")

Fixes: b430eaba0be5 ("[media] flexcop-usb: don't use stack for DMA")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-gxm-khadas-vim2: fix uart_A bluetooth node

commit 388a2772979b625042524d8b91280616ab4ff5ee upstream.

Fixes: 33344e2111a3 ("arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson-gxl-s905x-khadas-vim: fix uart_A bluetooth node

commit 1c6d575574ec87dbccf7af20ef9dc0df02614069 upstream.

Fixes: dd5297cc8b8b ("arm64: dts: meson-gxl-s905x-khadas-vim enable Bluetooth")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix memory leak in hci_connect_le_scan

commit d088337c38a5cd8f0230fbf2d514ff7672f9d0d3 upstream.

In the implementation of hci_connect_le_scan() when conn is added via
hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated
memory for conn is leaked. Use hci_conn_del() to release it.

Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: delete a stray unlock

commit df66499a1fab340c167250a5743931dc50d5f0fa upstream.

We used to take a lock in amp_physical_cfm() but then we moved it to
the caller function.  Unfortunately the unlock on this error path was
overlooked so it leads to a double unlock.

Fixes: a514b17fab51 ("Bluetooth: Refactor locking in amp_physical_cfm")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: fix PM leak in error case of setup

commit 3d44a6fd0775e6215e836423e27f8eedf8c871ea upstream.

If setup() fails a reference for runtime PM has already
been taken. Proper use of the error handling in btusb_open()is needed.
You cannot just return.

Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Mark get_slice_psize() & slice_addr_is_low() as notrace

commit 91a063c956084fb21cf2523bce6892514e3f1799 upstream.

These slice routines are called from the SLB miss handler, which can
lead to warnings from the IRQ code, because we have not reconciled the
IRQ state properly:

  WARNING: CPU: 72 PID: 30150 at arch/powerpc/kernel/irq.c:258 arch_local_irq_restore.part.0+0xcc/0x100
  Modules linked in:
  CPU: 72 PID: 30150 Comm: ftracetest Not tainted 5.5.0-rc2-gcc9x-g7e0165b2f1a9 #1
  NIP:  c00000000001d83c LR: c00000000029ab90 CTR: c00000000026cf90
  REGS: c0000007eee3b960 TRAP: 0700   Not tainted  (5.5.0-rc2-gcc9x-g7e0165b2f1a9)
  MSR:  8000000000021033 <SF,ME,IR,DR,RI,LE>  CR: 22242844  XER: 20000000
  CFAR: c00000000001d780 IRQMASK: 0
  ...
  NIP arch_local_irq_restore.part.0+0xcc/0x100
  LR  trace_graph_entry+0x270/0x340
  Call Trace:
    trace_graph_entry+0x254/0x340 (unreliable)
    function_graph_enter+0xe4/0x1a0
    prepare_ftrace_return+0xa0/0x130
    ftrace_graph_caller+0x44/0x94 # (get_slice_psize())
    slb_allocate_user+0x7c/0x100
    do_slb_fault+0xf8/0x300
    instruction_access_slb_common+0x140/0x180

Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191221121337.4894-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: axp20x: Fix AXP22x ELDO2 regulator enable bitmask

commit f40ddaa059fdfb472e3aeb733c6220d8e0633a47 upstream.

A copy-paste error was introduced when bitmasks were converted to
macros, incorrectly setting the enable bitmask for ELDO2 to the one
for ELDO1 for the AXP22x units.

Fix it by using the correct macro.

On affected boards, ELDO1 and/or ELDO2 are used to power the camera,
which is currently unsupported.

Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20191218044720.21990-1-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: uniphier: Fix FIFO threshold

commit 9cd34efbd3012171c102910ce17ee632a3cccb44 upstream.

Rx threshold means the value to inform the receiver when the number of words
in Rx FIFO is equal to or more than the value. Similarly, Tx threshold means
the value to inform the sender when the number of words in Tx FIFO is equal
to or less than the value. The controller triggers the driver to start
the transfer.

In case of Rx, the driver wants to detect that the specified number of words
N are in Rx FIFO, so the value of Rx threshold should be N. In case of Tx,
the driver wants to detect that the same number of spaces as Rx are in
Tx FIFO, so the value of Tx threshold should be (FIFO size - N).

For example, in order for the driver to receive at least 3 words from
Rx FIFO, set 3 to Rx threshold.
   +-+-+-+-+-+-+-+-+
   | | | | | |*|*|*|
   +-+-+-+-+-+-+-+-+

In order for the driver to send at least 3 words to Tx FIFO, because
it needs at least 3 spaces, set 8(FIFO size) - 3 = 5 to Tx threshold.
   +-+-+-+-+-+-+-+-+
   |*|*|*|*|*| | | |
   +-+-+-+-+-+-+-+-+

This adds new function uniphier_spi_set_fifo_threshold() to set
threshold value to the register.

And more, FIFO counts by 'words', so this renames 'fill_bytes' with
'fill_words', and fixes the calculation using bytes_per_words.

Fixes: 37ffab817098 ("spi: uniphier: introduce polling mode")
Cc: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1577149107-30670-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_ops

commit 6f1ff76154b8b36033efcbf6453a71a3d28f52cd upstream.

The .set_ramp_delay should be for bd70528_buck_ops only.
Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because
BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f).
So setting ramp_delay for LDOs may change the voltage output, fix it.

Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20200101022406.15176-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: axp20x: Fix axp20x_set_ramp_delay

commit 71dd2fe5dec171b34b71603a81bb46c24c498fde upstream.

Current code set incorrect bits when set ramp_delay for AXP20X_DCDC2,
fix it.

Fixes: d29f54df8b16 ("regulator: axp20x: add support for set_ramp_delay for AXP209")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191221081049.32490-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: tqmx86_wdt: Fix build error

commit 9a6c274ac1c4346f5384f2290caeb42dc674c471 upstream.

If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails:

drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe':
tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout'
tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device'

Select WATCHDOG_CORE to fix this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net, sysctl: Fix compiler warning when only cBPF is present

commit 1148f9adbe71415836a18a36c1b4ece999ab0973 upstream.

proc_dointvec_minmax_bpf_restricted() has been firstly introduced
in commit 2e4a30983b0f ("bpf: restrict access to core bpf sysctls")
under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in
ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv
allocations"), because a new sysctl, bpf_jit_limit, made use of it.
Finally, this parameter has become long instead of integer with
fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
and thus, a new proc_dolongvec_minmax_bpf_restricted() has been
added.

With this last change, we got back to that
proc_dointvec_minmax_bpf_restricted() is used only under
CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been
brought back.

So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n
since v4.20 we have:

  CC      net/core/sysctl_net_core.o
net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function]
  292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again.

Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191218091821.7080-1-alobakin@dlink.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_queue: enqueue skbs with NULL dst

commit 0b9173f4688dfa7c5d723426be1d979c24ce3d51 upstream.

Bridge packets that are forwarded have skb->dst == NULL and get
dropped by the check introduced by
b60a77386b1d4868f72f6353d35dabe5fbe981f2 (net: make skb_dst_force
return true when dst is refcounted).

To fix this we check skb_dst() before skb_dst_force(), so we don't
drop skb packet with dst == NULL. This holds also for skb at the
PRE_ROUTING hook so we remove the second check.

Fixes: b60a77386b1d ("net: make skb_dst_force return true when dst is refcounted")
Signed-off-by: Marco Oliverio <marco.oliverio@tanaza.com>
Signed-off-by: Rocco Folino <rocco.folino@tanaza.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table

commit e8796c6c69d129420ee94a1906b18d86b84644d4 upstream.

The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: don't check for AG deadlock for realtime files in bunmapi

commit 69ffe5960df16938bccfe1b65382af0b3de51265 upstream.

Commit 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") added
a check in __xfs_bunmapi() to stop early if we would touch multiple AGs
in the wrong order. However, this check isn't applicable for realtime
files. In most cases, it just makes us do unnecessary commits. However,
without the fix from the previous commit ("xfs: fix realtime file data
space leak"), if the last and second-to-last extents also happen to have
different "AG numbers", then the break actually causes __xfs_bunmapi()
to return without making any progress, which sends
xfs_itruncate_extents_flags() into an infinite loop.

Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>