Yuchung Cheng [Fri, 4 Aug 2017 03:38:52 +0000 (20:38 -0700)]
tcp: consolidate congestion control undo functions
Most TCP congestion controls are using identical logic to undo
cwnd except BBR. This patch consolidates these similar functions
to the one used currently by Reno and others.
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Fri, 4 Aug 2017 03:38:51 +0000 (20:38 -0700)]
tcp: fix cwnd undo in Reno and HTCP congestion controls
Using ssthresh to revert cwnd is less reliable when ssthresh is
bounded to 2 packets. This patch uses an existing variable in TCP
"prior_cwnd" that snapshots the cwnd right before entering fast
recovery and RTO recovery in Reno. This fixes the issue discussed
in netdev thread: "A buggy behavior for Linux TCP Reno and HTCP"
https://www.spinics.net/lists/netdev/msg444955.html
Suggested-by: Neal Cardwell <ncardwell@google.com>
Reported-by: Wei Sun <unlcsewsun@gmail.com>
Signed-off-by: Yuchung Cheng <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kiki good [Thu, 3 Aug 2017 23:07:45 +0000 (00:07 +0100)]
net: systemport: Support 64bit statistics
When using Broadcom Systemport device in 32bit Platform, ifconfig can
only report up to 4G tx,rx status, which will be wrapped to 0 when the
number of incoming or outgoing packets exceeds 4G, only taking
around 2 hours in busy network environment (such as streaming).
Therefore, it makes hard for network diagnostic tool to get reliable
statistical result, so the patch is used to add 64bit support for
Broadcom Systemport device in 32bit Platform.
This patch provides 64bit statistics capability on both ethtool and ifconfig.
Signed-off-by: Jianming.qiao <kiki-good@hotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Thu, 3 Aug 2017 22:10:17 +0000 (15:10 -0700)]
liquidio: moved console_bitmask module param to lio_main.c
Moving PF module param console_bitmask to lio_main.c for consistency.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Thu, 3 Aug 2017 20:08:24 +0000 (13:08 -0700)]
liquidio: add missing strings in oct_dev_state_str array
There's supposed to be a one-to-one correspondence between the 18 macros
that #define the OCT_DEV states (in octeon_device.h) and the strings in the
oct_dev_state_str array, but there are only 14 strings in the array.
Add the missing strings (so they become 18 in total), and also revise some
incorrect/outdated text of existing strings.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 7 Aug 2017 03:55:29 +0000 (20:55 -0700)]
Merge branch 'phylink-and-sfp-support'
Russell King says:
====================
phylink and sfp support
This patch series introduces generic support for SFP sockets found on
various Marvell based platforms. The idea here is to provide common
SFP socket support which can be re-used by network drivers as
appropriate, rather than each network driver having to re-implement
SFP socket support.
SFP sockets typically use other system resources, eg, I2C buses to read
identifying information, and GPIOs to monitor socket state and control
the socket. Meanwhile, some network drivers drive multiple ethernet
ports from one instantiation of the driver.
It is not desirable to block the initialisation of a network driver
(thus denying other ports from being operational) if the resources
for the SFP socket are not yet available. This means that an element
of independence between the SFP support code and the driver is
required.
More than that, SFP modules effectively bring hotplug PHYs to
networking - SFP copper modules normally contain a standard PHY
accessed over the I2C bus, and it is desirable to read their state
so network drivers can be appropriately configured.
To add to the complexity, SFP modules can be connected in at least
two places:
1. Directly to the serdes output of a MAC with no intervening PHY.
For example:
mvneta ----> SFP socket
2. To a PHY, for example:
mvpp2 ---> PHY ---> copper
|
`-----> SFP socket
This code supports both setups, although it's not fully implemented
with scenario (2).
Moreover, the link presented by the SFP module can be one of the
10Gbase-R family (for SFP+ sockets), SGMII or 1000base-X (for SFP
sockets) depending on the module, and network drivers need to
reconfigure themselves accordingly for the link to come up.
For example, if the MAC is configured for SGMII and a fibre module
is plugged in, the link won't come up until the MAC is reconfigured
for 1000base-X mode.
The SFP code manages the SFP socket - detecting the module, reading
the identifying information, and managing the control and status
signals. Importantly, it disables the SFP module transmitter when
the MAC is down, so that the laser is turned off (but that is not
a guarantee.)
phylink provides the mechanisms necessary to manage the link modes,
based on the SFP module type, and supports hot-plugging of the PHY
without needing the MAC driver to be brought up and down on
transitions. phylink also supports the classical static PHY and
fixed-link modes.
I currently (but not included in this series) have code to convert
mvneta to use phylink, and the out of tree mvpp2x driver. I have
nothing for the mvpp2 driver at present as that driver is only
recently becoming functional on 10G hardware, and is missing a lot
of features that are necessary to make things work correctly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:39 +0000 (15:03 +0100)]
sfp: add SFP module support
Add support for SFP hotpluggable modules via sfp-bus and phylink.
This supports both copper and optical SFP modules, which require
different Serdes modes in order to properly negotiate the link.
Optical SFP modules typically require the Serdes link to be talking
1000BaseX mode - this is the gigabit ethernet mode defined by the
802.3 standard.
Copper SFP modules typically integrate a PHY in the module to convert
from Serdes to copper, and the PHY will be configured by the vendor
to either present a 1000BaseX Serdes link (for fixed 1000BaseT) or a
SGMII Serdes link. However, this is vendor defined, so we instead
detect the PHY, switch the link to SGMII mode, and use traditional
PHY based negotiation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:34 +0000 (15:03 +0100)]
phylink: add in-band autonegotiation support for 10GBase-KR mode.
Add in-band autonegotation support for 10GBase-KR mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:28 +0000 (15:03 +0100)]
phylink: add support for MII ioctl access to Clause 45 PHYs
Add support for reading and writing the clause 45 MII registers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:23 +0000 (15:03 +0100)]
phylink: add module EEPROM support
Add support for reading module EEPROMs through phylink.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:18 +0000 (15:03 +0100)]
sfp: add sfp-bus to bridge between network devices and sfp cages
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:13 +0000 (15:03 +0100)]
phylink: add phylink infrastructure
The link between the ethernet MAC and its PHY has become more complex
as the interface evolves. This is especially true with serdes links,
where the part of the PHY is effectively integrated into the MAC.
Serdes links can be connected to a variety of devices, including SFF
modules soldered down onto the board with the MAC, a SFP cage with
a hotpluggable SFP module which may contain a PHY or directly modulate
the serdes signals onto optical media with or without a PHY, or even
a classical PHY connection.
Moreover, the negotiation information on serdes links comes in two
varieties - SGMII mode, where the PHY provides its speed/duplex/flow
control information to the MAC, and 1000base-X mode where both ends
exchange their abilities and each resolve the link capabilities.
This means we need a more flexible means to support these arrangements,
particularly with the hotpluggable nature of SFP, where the PHY can
be attached or detached after the network device has been brought up.
Ethtool information can come from multiple sources:
- we may have a PHY operating in either SGMII or 1000base-X mode, in
which case we take ethtool/mii data directly from the PHY.
- we may have a optical SFP module without a PHY, with the MAC
operating in 1000base-X mode - the ethtool/mii data needs to come
from the MAC.
- we may have a copper SFP module with a PHY whic can't be accessed,
which means we need to take ethtool/mii data from the MAC.
Phylink aims to solve this by providing an intermediary between the
MAC and PHY, providing a safe way for PHYs to be hotplugged, and
allowing a SFP driver to reconfigure the serdes connection.
Phylink also takes over support of fixed link connections, where the
speed/duplex/flow control are fixed, but link status may be controlled
by a GPIO signal. By avoiding the fixed-phy implementation, phylink
can provide a faster response to link events: fixed-phy has to wait for
phylib to operate its state machine, which can take several seconds.
In comparison, phylink takes milliseconds.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- remove sync status
- rework supported and advertisment handling
- add 1000base-x speed for fixed links
- use functionality exported from phy-core, reworking
__phylink_ethtool_ksettings_set for it
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:08 +0000 (15:03 +0100)]
net: phy: add I2C mdio bus
Add an I2C MDIO bus bridge library, to allow phylib to access PHYs which
are connected to an I2C bus instead of the more conventional MDIO bus.
Such PHYs can be found in SFP adapters and SFF modules.
Since PHYs appear at I2C bus address 0x40..0x5f, and 0x50/0x51 are
reserved for SFP EEPROMs/diagnostics, we must not allow the MDIO bus
to access these I2C addresses.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:03:03 +0000 (15:03 +0100)]
net: phy: export phy_start_machine() for phylink
phylink will need phy_start_machine exported, so lets export it as a
GPL symbol. Documentation/networking/phy.txt indicates that this
should be a PHY API function.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:02:58 +0000 (15:02 +0100)]
net: phy: provide a hook for link up/link down events
Sometimes, we need to do additional work between the PHY coming up and
marking the carrier present - for example, we may need to wait for the
PHY to MAC link to finish negotiation. This changes phylib to provide
a notification function pointer which avoids the built-in
netif_carrier_on() and netif_carrier_off() functions.
Standard ->adjust_link functionality is provided by hooking a helper
into the new ->phy_link_change method.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:02:52 +0000 (15:02 +0100)]
net: phy: add 1000Base-X to phy settings table
Add the missing 1000Base-X entry to the phy settings table. This was
not included because the original code could not cope with more than
32 bits of link mode mask.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:02:47 +0000 (15:02 +0100)]
net: phy: move phy_lookup_setting() and guts of phy_supported_speeds() to phy-core
phy_lookup_setting() provides useful functionality in ethtool code
outside phylib. Move it to phy-core and allow it to be re-used (eg,
in phylink) rather than duplicated elsewhere. Note that this supports
the larger linkmode space.
As we move the phy settings table, we also need to move the guts of
phy_supported_speeds() as well.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:02:42 +0000 (15:02 +0100)]
net: phy: split out PHY speed and duplex string generation
Other code would like to make use of this, so make the speed and duplex
string generation visible, and place it in a separate file.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 25 Jul 2017 14:02:37 +0000 (15:02 +0100)]
net: phy: allow settings table to support more than 32 link modes
Allow the phy settings table to support more than 32 link modes by
switching to the ethtool link mode bit number representation, rather
than storing the mask. This will allow phylink and other ethtool
code to share the settings table to look up settings.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 7 Aug 2017 03:51:12 +0000 (20:51 -0700)]
Merge branch 'IP-cleanup-LSRR-option-processing'
Paolo Abeni says:
====================
IP: cleanup LSRR option processing
The __ip_options_echo() function expect a valid dst entry in skb->dst;
as result we sometimes need to preserve the dst entry for the whole IP
RX path.
The current usage of skb->dst looks more a relic from ancient past that
a real functional constraint. This patchset tries to remove such usage,
and than drops some hacks currently in place in the IP code to keep
skb->dst around.
__ip_options_echo() uses of skb->dst for two different purposes: retrieving
the netns assicated with the skb, and modify the ingress packet LSRR address
list.
The first patch removes the code modifying the ingress packet, and the second
one provides an explicit netns argument to __ip_options_echo(). The following
patches cleanup the current code keeping arund skb->dst for __ip_options_echo's
sake.
Updating the __ip_options_echo() function has been previously discussed here:
http://marc.info/?l=linux-netdev&m=
150064533516348&w=2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 3 Aug 2017 16:07:08 +0000 (18:07 +0200)]
udp: no need to preserve skb->dst
__ip_options_echo() does not need anymore skb->dst, so we can
avoid explicitly preserving it for its own sake.
This is almost a revert of commit
0ddf3fb2c43d ("udp: preserve
skb->dst if required for IP options processing") plus some
lifting to fit later changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 3 Aug 2017 16:07:07 +0000 (18:07 +0200)]
Revert "ipv4: keep skb->dst around in presence of IP options"
ip_options_echo() does not use anymore the skb->dst and don't
need to keep the dst around for options's sake only.
This reverts commit
34b2cef20f19c87999fff3da4071e66937db9644.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 3 Aug 2017 16:07:06 +0000 (18:07 +0200)]
ip/options: explicitly provide net ns to __ip_options_echo()
__ip_options_echo() uses the current network namespace, and
currently retrives it via skb->dst->dev.
This commit adds an explicit 'net' argument to __ip_options_echo()
and update all the call sites to provide it, usually via a simpler
sock_net().
After this change, __ip_options_echo() no more needs to access
skb->dst and we can drop a couple of hack to preserve such
info in the rx path.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 3 Aug 2017 16:07:05 +0000 (18:07 +0200)]
IP: do not modify ingress packet IP option in ip_options_echo()
While computing the response option set for LSRR, ip_options_echo()
also changes the ingress packet LSRR addresses list, setting
the last one to the dst specific address for the ingress packet
- via memset(start[ ...
The only visible effect of such change - beyond possibly damaging
shared/cloned skbs - is modifying the data carried by ICMP replies
changing the header information for reported the ingress packet,
which violates RFC1122 3.2.2.6.
All the others call sites just ignore the ingress packet IP options
after calling ip_options_echo()
Note that the last element in the LSRR option address list for the
reply packet will be properly set later in the ip output path
via ip_options_build().
This buggy memset() predates git history and apparently was present
into the initial ip_options_echo() implementation in linux 1.3.30 but
still looks wrong.
The removal of the fib_compute_spec_dst() call will help
completely dropping the skb->dst usage by __ip_options_echo() with a
later patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Thu, 3 Aug 2017 15:15:32 +0000 (18:15 +0300)]
aquantia: Switch to use napi_gro_receive
Add support for GRO (generic receive offload) for aQuantia Atlantic driver.
This results in a perfomance improvement when GRO is enabled.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Fri, 4 Aug 2017 15:24:05 +0000 (08:24 -0700)]
net: comment fixes against BPF devmap helper calls
Update BPF comments to accurately reflect XDP usage.
Fixes:
97f91a7cf04ff ("bpf: add bpf_redirect_map helper routine")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 4 Aug 2017 18:21:25 +0000 (11:21 -0700)]
Merge branch 'net-sched-summer-cleanup-part-1-mainly-in-exts-area'
Jiri Pirko says:
====================
net: sched: summer cleanup part 1, mainly in exts area
This patchset is one of the couple cleanup patchsets I have in queue.
The motivation aside the obvious need to "make things nicer" is also
to prepare for shared filter blocks introduction. That requires tp->q
removal, and therefore removal of all tp->q users.
Patch 1 is just some small thing I spotted on the way
Patch 2 removes one user of tp->q, namely tcf_em_tree_change
Patches 3-8 do preparations for exts->nr_actions removal
Patches 9-10 do simple renames of functions in cls*
Patches 11-19 remove unnecessary calls of tcf_exts_change helper
The last patch changes tcf_exts_change to don't take lock
Tested by tools/testing/selftests/tc-testing
v1->v2:
- removed conversion of action array to list as noted by Cong
- added the past patch instead
- small rebases of patches 11-19
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:15 +0000 (14:29 +0200)]
net: sched: avoid atomic swap in tcf_exts_change
tcf_exts_change is always called on newly created exts, which are not used
on fastpath. Therefore, simple struct copy is enough.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:14 +0000 (14:29 +0200)]
net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct
As the n struct was allocated right before u32_set_parms call,
no need to use tcf_exts_change to do atomic change, and we can just
fill-up the unused exts struct directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:13 +0000 (14:29 +0200)]
net: sched: cls_route: no need to call tcf_exts_change for newly allocated struct
As the f struct was allocated right before route4_set_parms call,
no need to use tcf_exts_change to do atomic change, and we can just
fill-up the unused exts struct directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:12 +0000 (14:29 +0200)]
net: sched: cls_flow: no need to call tcf_exts_change for newly allocated struct
As the fnew struct just was allocated, so no need to use tcf_exts_change
to do atomic change, and we can just fill-up the unused exts struct
directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:11 +0000 (14:29 +0200)]
net: sched: cls_cgroup: no need to call tcf_exts_change for newly allocated struct
As the new struct just was allocated, so no need to use tcf_exts_change
to do atomic change, and we can just fill-up the unused exts struct
directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:10 +0000 (14:29 +0200)]
net: sched: cls_bpf: no need to call tcf_exts_change for newly allocated struct
As the prog struct was allocated right before cls_bpf_set_parms call,
no need to use tcf_exts_change to do atomic change, and we can just
fill-up the unused exts struct directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:09 +0000 (14:29 +0200)]
net: sched: cls_basic: no need to call tcf_exts_change for newly allocated struct
As the f struct was allocated right before basic_set_parms call, no need
to use tcf_exts_change to do atomic change, and we can just fill-up
the unused exts struct directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:08 +0000 (14:29 +0200)]
net: sched: cls_matchall: no need to call tcf_exts_change for newly allocated struct
As the head struct was allocated right before mall_set_parms call,
no need to use tcf_exts_change to do atomic change, and we can just
fill-up the unused exts struct directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:07 +0000 (14:29 +0200)]
net: sched: cls_fw: no need to call tcf_exts_change for newly allocated struct
As the f struct was allocated right before fw_set_parms call, no need
to use tcf_exts_change to do atomic change, and we can just fill-up
the unused exts struct directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:06 +0000 (14:29 +0200)]
net: sched: cls_flower: no need to call tcf_exts_change for newly allocated struct
As the f struct was allocated right before fl_set_parms call, no need
to use tcf_exts_change to do atomic change, and we can just fill-up
the unused exts struct directly by tcf_exts_validate.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:05 +0000 (14:29 +0200)]
net: sched: cls_fw: rename fw_change_attrs function
Since the function name is misleading since it is not changing
anything, name it similarly to other cls.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:04 +0000 (14:29 +0200)]
net: sched: cls_bpf: rename cls_bpf_modify_existing function
The name cls_bpf_modify_existing is highly misleading, as it indeed does
not modify anything existing. It does not modify at all.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:03 +0000 (14:29 +0200)]
net: sched: use tcf_exts_has_actions instead of exts->nr_actions
For check in tcf_exts_dump use tcf_exts_has_actions helper instead
of exts->nr_actions for checking if there are any actions present.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:02 +0000 (14:29 +0200)]
net: sched: remove check for number of actions in tcf_exts_exec
Leave it to tcf_action_exec to return TC_ACT_OK in case there is no
action present.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:01 +0000 (14:29 +0200)]
net: sched: fix return value of tcf_exts_exec
Return the defined TC_ACT_OK instead of 0.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:29:00 +0000 (14:29 +0200)]
net: sched: remove redundant helpers tcf_exts_is_predicative and tcf_exts_is_available
These two helpers are doing the same as tcf_exts_has_actions, so remove
them and use tcf_exts_has_actions instead.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:28:59 +0000 (14:28 +0200)]
net: sched: use tcf_exts_has_actions in tcf_exts_exec
Use the tcf_exts_has_actions helper instead or directly testing
exts->nr_actions in tcf_exts_exec.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:28:58 +0000 (14:28 +0200)]
net: sched: change names of action number helpers to be aligned with the rest
The rest of the helpers are named tcf_exts_*, so change the name of
the action number helpers to be aligned. While at it, change to inline
functions.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:28:57 +0000 (14:28 +0200)]
net: sched: remove unneeded tcf_em_tree_change
Since tcf_em_tree_validate could be always called on a newly created
filter, there is no need for this change function.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 4 Aug 2017 12:28:56 +0000 (14:28 +0200)]
net: sched: sch_atm: use Qdisc_class_common structure
Even if it is only for classid now, use this common struct a be aligned
with the rest of the classful qdiscs.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lin Yun Sheng [Fri, 4 Aug 2017 09:24:59 +0000 (17:24 +0800)]
net: hns: Fix for __udivdi3 compiler error
This patch fixes the __udivdi3 undefined error reported by
test robot.
Fixes:
b8c17f708831 ("net: hns: Add self-adaptive interrupt coalesce support in hns driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 4 Aug 2017 08:17:21 +0000 (11:17 +0300)]
net: phy: marvell: logical vs bitwise OR typo
This was supposed to be a bitwise OR but there is a || vs | typo.
Fixes:
864dc729d528 ("net: phy: marvell: Refactor m88e1121 RGMII delay configuration")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 4 Aug 2017 04:37:30 +0000 (21:37 -0700)]
Merge branch 'socket-sendmsg-zerocopy'
Willem de Bruijn says:
====================
socket sendmsg MSG_ZEROCOPY
Introduce zerocopy socket send flag MSG_ZEROCOPY. This extends the
shared page support (SKBTX_SHARED_FRAG) from sendpage to sendmsg.
Implement the feature for TCP initially, as large writes benefit
most.
On a send call with MSG_ZEROCOPY, the kernel pins user pages and
links these directly into the skbuff frags[] array.
Each send call with MSG_ZEROCOPY that transmits data will eventually
queue a completion notification on the error queue: a per-socket u32
incremented on each such call. A request may have to revert to copy
to succeed, for instance when a device cannot support scatter-gather
IO. In that case a flag is passed along to notify that the operation
succeeded without zerocopy optimization.
The implementation extends the existing zerocopy infra for tuntap,
vhost and xen with features needed for TCP, notably reference
counting to handle cloning on retransmit and GSO.
For more details, see also the netdev 2.1 paper and presentation at
https://netdevconf.org/2.1/session.html?debruijn
Changelog:
v3 -> v4:
- dropped UDP, RAW and PF_PACKET for now
Without loopback support, datagrams are usually smaller than
the ~8KB size threshold needed to benefit from zerocopy.
- style: a few reverse chrismas tree
- minor: SO_ZEROCOPY returns ENOTSUPP on unsupported protocols
- minor: squashed SO_EE_CODE_ZEROCOPY_COPIED patch
- minor: rebased on top of net-next with kmap_atomic fix
v2 -> v3:
- fix rebase conflict: SO_ZEROCOPY 59 -> 60
v1 -> v2:
- fix (kbuild-bot): do not remove uarg until patch 5
- fix (kbuild-bot): move zerocopy_sg_from_iter doc with function
- fix: remove unused extern in header file
RFCv2 -> v1:
- patch 2
- review comment: in skb_copy_ubufs, always allocate order-0
page, also when replacing compound source pages.
- patch 3
- fix: always queue completion notification on MSG_ZEROCOPY,
also if revert to copy.
- fix: on syscall abort, correctly revert notification state
- minor: skip queue notification on SOCK_DEAD
- minor: replace BUG_ON with WARN_ON in recoverable error
- patch 4
- new: add socket option SOCK_ZEROCOPY.
only honor MSG_ZEROCOPY if set, ignore for legacy apps.
- patch 5
- fix: clear zerocopy state on skb_linearize
- patch 6
- fix: only coalesce if prev errqueue elem is zerocopy
- minor: try coalescing with list tail instead of head
- minor: merge bytelen limit patch
- patch 7
- new: signal when data had to be copied
- patch 8 (tcp)
- optimize: avoid setting PSH bit when exceeding max frags.
that limits GRO on the client. do not goto new_segment.
- fix: fail on MSG_ZEROCOPY | MSG_FASTOPEN
- minor: do not wait for memory: does not work for optmem
- minor: simplify alloc
- patch 9 (udp)
- new: add PF_INET6
- fix: attach zerocopy notification even if revert to copy
- minor: simplify alloc size arithmetic
- patch 10 (raw hdrinc)
- new: add PF_INET6
- patch 11 (pf_packet)
- minor: simplify slightly
- patch 12
- new msg_zerocopy regression test: use veth pair to test
all protocols: ipv4/ipv6/packet, tcp/udp/raw, cork
all relevant ethtool settings: rx off, sg off
all relevant packet lengths: 0, <MAX_HEADER, max size
RFC -> RFCv2:
- review comment: do not loop skb with zerocopy frags onto rx:
add skb_orphan_frags_rx to orphan even refcounted frags
call this in __netif_receive_skb_core, deliver_skb and tun:
same as commit
1080e512d44d ("net: orphan frags on receive")
- fix: hold an explicit sk reference on each notification skb.
previously relied on the reference (or wmem) held by the
data skb that would trigger notification, but this breaks
on skb_orphan.
- fix: when aborting a send, do not inc the zerocopy counter
this caused gaps in the notification chain
- fix: in packet with SOCK_DGRAM, pull ll headers before calling
zerocopy_sg_from_iter
- fix: if sock_zerocopy_realloc does not allow coalescing,
do not fail, just allocate a new ubuf
- fix: in tcp, check return value of second allocation attempt
- chg: allocate notification skbs from optmem
to avoid affecting tcp write queue accounting (TSQ)
- chg: limit #locked pages (ulimit) per user instead of per process
- chg: grow notification ids from 16 to 32 bit
- pass range [lo, hi] through 32 bit fields ee_info and ee_data
- chg: rebased to davem-net-next on top of v4.10-rc7
- add: limit notification coalescing
sharing ubufs limits overhead, but delays notification until
the last packet is released, possibly unbounded. Add a cap.
- tests: add snd_zerocopy_lo pf_packet test
- tests: two bugfixes (add do_flush_tcp, ++sent not only in debug)
Limitations / Known Issues:
- TCP may build slightly smaller than max TSO packets due to
exceeding MAX_SKB_FRAGS frags when zerocopy pages are unaligned.
- All SKBTX_SHARED_FRAG may require additional __skb_linearize or
skb_copy_ubufs calls in u32, skb_find_text, similar to
skb_checksum_help.
Notification skbuffs are allocated from optmem. For sockets that
cannot effectively coalesce notifications, the optmem max may need
to be increased to avoid hitting -ENOBUFS:
sysctl -w net.core.optmem_max=1048576
In application load, copy avoidance shows a roughly 5% systemwide
reduction in cycles when streaming large flows and a 4-8% reduction in
wall clock time on early tensorflow test workloads.
For the single-machine veth tests to succeed, loopback support has to
be temporarily enabled by making skb_orphan_frags_rx map to
skb_orphan_frags.
* Performance
The below table shows cycles reported by perf for a netperf process
sending a single 10 Gbps TCP_STREAM. The first three columns show
Mcycles spent in the netperf process context. The second three columns
show time spent systemwide (-a -C A,B) on the two cpus that run the
process and interrupt handler. Reported is the median of at least 3
runs. std is a standard netperf, zc uses zerocopy and % is the ratio.
Netperf is pinned to cpu 2, network interrupts to cpu3, rps and rfs
are disabled and the kernel is booted with idle=halt.
NETPERF=./netperf -t TCP_STREAM -H $host -T 2 -l 30 -- -m $size
perf stat -e cycles $NETPERF
perf stat -C 2,3 -a -e cycles $NETPERF
--process cycles-- ----cpu cycles----
std zc % std zc %
4K 27,609 11,217 41 49,217 39,175 79
16K 21,370 3,823 18 43,540 29,213 67
64K 20,557 2,312 11 42,189 26,910 64
256K 21,110 2,134 10 43,006 27,104 63
1M 20,987 1,610 8 42,759 25,931 61
Perf record indicates the main source of these differences. Process
cycles only at 1M writes (perf record; perf report -n):
std:
Samples: 42K of event 'cycles', Event count (approx.):
21258597313
79.41% 33884 netperf [kernel.kallsyms] [k] copy_user_generic_string
3.27% 1396 netperf [kernel.kallsyms] [k] tcp_sendmsg
1.66% 694 netperf [kernel.kallsyms] [k] get_page_from_freelist
0.79% 325 netperf [kernel.kallsyms] [k] tcp_ack
0.43% 188 netperf [kernel.kallsyms] [k] __alloc_skb
zc:
Samples: 1K of event 'cycles', Event count (approx.):
1439509124
30.36% 584 netperf.zerocop [kernel.kallsyms] [k] gup_pte_range
14.63% 284 netperf.zerocop [kernel.kallsyms] [k] __zerocopy_sg_from_iter
8.03% 159 netperf.zerocop [kernel.kallsyms] [k] skb_zerocopy_add_frags_iter
4.84% 96 netperf.zerocop [kernel.kallsyms] [k] __alloc_skb
3.10% 60 netperf.zerocop [kernel.kallsyms] [k] kmem_cache_alloc_node
* Safety
The number of pages that can be pinned on behalf of a user with
MSG_ZEROCOPY is bound by the locked memory ulimit.
While the kernel holds process memory pinned, a process cannot safely
reuse those pages for other purposes. Packets looped onto the receive
stack and queued to a socket can be held indefinitely. Avoid unbounded
notification latency by restricting user pages to egress paths only.
skb_orphan_frags_rx() will create a private copy of pages even for
refcounted packets when these are looped, as did skb_orphan_frags for
the original tun zerocopy implementation.
Pages are not remapped read-only. Processes can modify packet contents
while packets are in flight in the kernel path. Bytes on which kernel
control flow depends (headers) are copied to avoid TOCTTOU attacks.
Datapath integrity does not otherwise depend on payload, with three
exceptions: checksums, optional sk_filter/tc u32/.. and device +
driver logic. The effect of wrong checksums is limited to the
misbehaving process. TC filters that access contents may have to be
excluded by adding an skb_orphan_frags_rx.
Processes can also safely avoid OOM conditions by bounding the number
of bytes passed with MSG_ZEROCOPY and by removing shared pages after
transmission from their own memory map.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:45 +0000 (16:29 -0400)]
test: add msg_zerocopy test
Introduce regression test for msg_zerocopy feature. Send traffic from
one process to another with and without zerocopy.
Evaluate tcp, udp, raw and packet sockets, including variants
- udp: corking and corking with mixed copy/zerocopy calls
- raw: with and without hdrincl
- packet: at both raw and dgram level
Test on both ipv4 and ipv6, optionally with ethtool changes to
disable scatter-gather, tx checksum or tso offload. All of these
can affect zerocopy behavior.
The regression test can be run on a single machine if over a veth
pair. Then skb_orphan_frags_rx must be modified to be identical to
skb_orphan_frags to allow forwarding zerocopy locally.
The msg_zerocopy.sh script will setup the veth pair in network
namespaces and run all tests.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:44 +0000 (16:29 -0400)]
tcp: enable MSG_ZEROCOPY
Enable support for MSG_ZEROCOPY to the TCP stack. TSO and GSO are
both supported. Only data sent to remote destinations is sent without
copying. Packets looped onto a local destination have their payload
copied to avoid unbounded latency.
Tested:
A 10x TCP_STREAM between two hosts showed a reduction in netserver
process cycles by up to 70%, depending on packet size. Systemwide,
savings are of course much less pronounced, at up to 20% best case.
msg_zerocopy.sh 4 tcp:
without zerocopy
tx=121792 (7600 MB) txc=0 zc=n
rx=60458 (7600 MB)
with zerocopy
tx=286257 (17863 MB) txc=286257 zc=y
rx=140022 (17863 MB)
This test opens a pair of sockets over veth, one one calls send with
64KB and optionally MSG_ZEROCOPY and on the other reads the initial
bytes. The receiver truncates, so this is strictly an upper bound on
what is achievable. It is more representative of sending data out of
a physical NIC (when payload is not touched, either).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:43 +0000 (16:29 -0400)]
sock: ulimit on MSG_ZEROCOPY pages
Bound the number of pages that a user may pin.
Follow the lead of perf tools to maintain a per-user bound on memory
locked pages commit
789f90fcf6b0 ("perf_counter: per user mlock gift")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:42 +0000 (16:29 -0400)]
sock: MSG_ZEROCOPY notification coalescing
In the simple case, each sendmsg() call generates data and eventually
a zerocopy ready notification N, where N indicates the Nth successful
invocation of sendmsg() with the MSG_ZEROCOPY flag on this socket.
TCP and corked sockets can cause send() calls to append new data to an
existing sk_buff and, thus, ubuf_info. In that case the notification
must hold a range. odify ubuf_info to store a inclusive range [N..N+m]
and add skb_zerocopy_realloc() to optionally extend an existing range.
Also coalesce notifications in this common case: if a notification
[1, 1] is about to be queued while [0, 0] is the queue tail, just modify
the head of the queue to read [0, 1].
Coalescing is limited to a few TSO frames worth of data to bound
notification latency.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:41 +0000 (16:29 -0400)]
sock: enable MSG_ZEROCOPY
Prepare the datapath for refcounted ubuf_info. Clone ubuf_info with
skb_zerocopy_clone() wherever needed due to skb split, merge, resize
or clone.
Split skb_orphan_frags into two variants. The split, merge, .. paths
support reference counted zerocopy buffers, so do not do a deep copy.
Add skb_orphan_frags_rx for paths that may loop packets to receive
sockets. That is not allowed, as it may cause unbounded latency.
Deep copy all zerocopy copy buffers, ref-counted or not, in this path.
The exact locations to modify were chosen by exhaustively searching
through all code that might modify skb_frag references and/or the
the SKBTX_DEV_ZEROCOPY tx_flags bit.
The changes err on the safe side, in two ways.
(1) legacy ubuf_info paths virtio and tap are not modified. They keep
a 1:1 ubuf_info to sk_buff relationship. Calls to skb_orphan_frags
still call skb_copy_ubufs and thus copy frags in this case.
(2) not all copies deep in the stack are addressed yet. skb_shift,
skb_split and skb_try_coalesce can be refined to avoid copying.
These are not in the hot path and this patch is hairy enough as
is, so that is left for future refinement.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:40 +0000 (16:29 -0400)]
sock: add SOCK_ZEROCOPY sockopt
The send call ignores unknown flags. Legacy applications may already
unwittingly pass MSG_ZEROCOPY. Continue to ignore this flag unless a
socket opts in to zerocopy.
Introduce socket option SO_ZEROCOPY to enable MSG_ZEROCOPY processing.
Processes can also query this socket option to detect kernel support
for the feature. Older kernels will return ENOPROTOOPT.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:39 +0000 (16:29 -0400)]
sock: add MSG_ZEROCOPY
The kernel supports zerocopy sendmsg in virtio and tap. Expand the
infrastructure to support other socket types. Introduce a completion
notification channel over the socket error queue. Notifications are
returned with ee_origin SO_EE_ORIGIN_ZEROCOPY. ee_errno is 0 to avoid
blocking the send/recv path on receiving notifications.
Add reference counting, to support the skb split, merge, resize and
clone operations possible with SOCK_STREAM and other socket types.
The patch does not yet modify any datapaths.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:38 +0000 (16:29 -0400)]
sock: skb_copy_ubufs support for compound pages
Refine skb_copy_ubufs to support compound pages. With upcoming TCP
zerocopy sendmsg, such fragments may appear.
The existing code replaces each page one for one. Splitting each
compound page into an independent number of regular pages can result
in exceeding limit MAX_SKB_FRAGS if data is not exactly page aligned.
Instead, fill all destination pages but the last to PAGE_SIZE.
Split the existing alloc + copy loop into separate stages:
1. compute bytelength and minimum number of pages to store this.
2. allocate
3. copy, filling each page except the last to PAGE_SIZE bytes
4. update skb frag array
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 3 Aug 2017 20:29:37 +0000 (16:29 -0400)]
sock: allocate skbs from optmem
Add sock_omalloc and sock_ofree to be able to allocate control skbs,
for instance for looping errors onto sk_error_queue.
The transmit budget (sk_wmem_alloc) is involved in transmit skb
shaping, most notably in TCP Small Queues. Using this budget for
control packets would impact transmission.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Aug 2017 22:36:01 +0000 (15:36 -0700)]
Merge branch 'mlxsw-Support-for-IPv6-UC-router'
Jiri Pirko says:
====================
mlxsw: Support for IPv6 UC router
Ido says:
This set adds support for IPv6 unicast routes offload. The first four
patches make the FIB notification chain generic so that it could be used
by address families other than IPv4. This is done by having each address
family register its callbacks with the common code, so that its FIB tables
and rules could be dumped upon registration to the chain, while ensuring
the integrity of the dump. The exact mechanics are explained in detail in
the first patch.
The next six patches build upon this work and add the necessary callbacks
in IPv6 code. This allows listeners of the chain to receive notifications
about IPv6 routes addition, deletion and replacement as well as FIB rules
notifications.
Unlike user space notifications for IPv6 multipath routes, the FIB
notification chain notifies these on a per-nexthop basis. This allows
us to keep the common code lean and is also unnecessary, as notifications
are serialized by each table's lock whereas applications maintaining
netlink caches may suffer from concurrent dumps and deletions / additions
of routes.
The next five patches audit the different code paths reading the route's
reference count (rt6i_ref) and remove assumptions regarding its meaning.
This is needed since non-FIB users need to be able to hold a reference on
the route and a non-zero reference count no longer means the route is in
the FIB.
The last six patches enable the mlxsw driver to offload IPv6 unicast
routes to the Spectrum ASIC. Without resorting to ACLs, lookup is done
solely based on the destination IP, so the abort mechanism is invoked
upon the addition of source-specific routes.
Follow-up patch sets will increase the scale of gatewayed routes by
consolidating identical nexthop groups to one adjacency entry in the
device's adjacency table (as in IPv4), as well as add support for
NH_{ADD,DEL} events which enable support for the
'ignore_routes_with_linkdown' sysctl.
Changes in v2:
* Provide offload indication for individual nexthops (David Ahern).
* Use existing route reference count instead of adding another one.
This resulted in several new patches to remove assumptions regarding
current semantics of the existing reference count (David Ahern).
* Add helpers to allow non-FIB users to take a reference on route.
* Remove use of tb6_lock in mlxsw (David Ahern).
* Add IPv6 dependency to mlxsw.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:31 +0000 (13:28 +0200)]
mlxsw: spectrum_router: Don't ignore IPv6 notifications
We now have all the necessary IPv6 infrastructure in place, so stop
ignoring these notifications.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:30 +0000 (13:28 +0200)]
mlxsw: spectrum_router: Abort on source-specific routes
Without resorting to ACLs, the device performs route lookup solely based
on the destination IP address.
In case source-specific routing is needed, an error is returned and the
abort mechanism is activated, thus allowing the kernel to take over
forwarding decisions.
Instead of aborting, we can trap specific destination prefixes where
source-specific routes are present, but this will result in a lot more
code that is unlikely to ever be used.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:29 +0000 (13:28 +0200)]
mlxsw: spectrum_router: Add support for route replace
In case we got a replace event, then the replaced route must exist. If
the route isn't capable of multipath, then replace first matching
non-multipath capable route.
If the route is capable of multipath and matching multipath capable
route is found, then replace it. Otherwise, replace first matching
non-multipath capable route.
The new route is inserted before the replaced one. In case the replaced
route is currently offloaded, then it's overwritten in the device's table
by the new route and later deleted, thus not impacting routed traffic.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:28 +0000 (13:28 +0200)]
mlxsw: spectrum_router: Add support for IPv6 routes addition / deletion
Allow directly connected and remote unicast IPv6 routes to be programmed
to the device's tables.
As with IPv4, identical routes - sharing the same destination prefix -
are ordered in a FIB node according to their table ID and then the
metric. While the kernel doesn't share the same trie for the local and
main table, this does happen in the device, so ordering according to
table ID is needed.
Since individual nexthops can be added and deleted in IPv6, each FIB
entry stores a linked list of the rt6_info structs it represents. Upon
the addition or deletion of a nexthop, a new nexthop group is allocated
according to the new configuration and the old one is destroyed.
Identical groups aren't currently consolidated, but will be in a
follow-up patchset.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:27 +0000 (13:28 +0200)]
mlxsw: spectrum_router: Sanitize IPv6 FIB rules
We only allow FIB offload in the presence of default rules or an l3mdev
rule. In a similar fashion to IPv4 FIB rules, sanitize IPv6 rules.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:26 +0000 (13:28 +0200)]
mlxsw: spectrum_router: Demultiplex FIB event based on family
The FIB notification block currently only handles IPv4 events, but we
want to start handling IPv6 events soon, so lay the groundwork now.
Do that by preparing the work item and process it according to the
notified address family.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:25 +0000 (13:28 +0200)]
ipv6: fib: Add helpers to hold / drop a reference on rt6_info
Similar to commit
1c677b3d2828 ("ipv4: fib: Add fib_info_hold() helper")
and commit
b423cb10807b ("ipv4: fib: Export free_fib_info()") add an
helper to hold a reference on rt6_info and export rt6_release() to drop
it and potentially release the route.
This is needed so that drivers capable of FIB offload could hold a
reference on the route before queueing it for offload and drop it after
the route has been programmed to the device's tables.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:24 +0000 (13:28 +0200)]
ipv6: Regenerate host route according to node pointer upon interface up
When an interface is brought back up, the kernel tries to restore the
host routes tied to its permanent addresses.
However, if the host route was removed from the FIB, then we need to
reinsert it. This is done by releasing the current dst and allocating a
new, so as to not reuse a dst with obsolete values.
Since this function is called under RTNL and using the same explanation
from the previous patch, we can test if the route is in the FIB by
checking its node pointer instead of its reference count.
Tested using the following script and Andrey's reproducer mentioned
in commit
8048ced9beb2 ("net: ipv6: regenerate host route if moved to gc
list") and linked below:
$ ip link set dev lo up
$ ip link add dummy1 type dummy
$ ip -6 address add cafe::1/64 dev dummy1
$ ip link set dev lo down # cafe::1/128 is removed
$ ip link set dev dummy1 up
$ ip link set dev lo up
The host route is correctly regenerated.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Link: http://lkml.kernel.org/r/CAAeHK+zSe82vc5gCRgr_EoUwiALPnWVdWJBPwJZBpbxYz=kGJw@mail.gmail.com
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:23 +0000 (13:28 +0200)]
ipv6: Regenerate host route according to node pointer upon loopback up
When the loopback device is brought back up we need to check if the host
route attached to the address is still in the FIB and regenerate one in
case it's not.
Host routes using the loopback device are always inserted into and
removed from the FIB under RTNL (under which this function is called),
so we can test their node pointer instead of the reference count in
order to check if the route is in the FIB or not.
Tested using the following script from Nicolas mentioned in
commit
a220445f9f43 ("ipv6: correctly add local routes when lo goes up"):
$ ip link add dummy1 type dummy
$ ip link set dummy1 up
$ ip link set lo down ; ip link set lo up
The host route is correctly regenerated.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:22 +0000 (13:28 +0200)]
ipv6: fib: Unlink replaced routes from their nodes
When a route is deleted its node pointer is set to NULL to indicate it's
no longer linked to its node. Do the same for routes that are replaced.
This will later allow us to test if a route is still in the FIB by
checking its node pointer instead of its reference count.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:21 +0000 (13:28 +0200)]
ipv6: fib: Don't assume only nodes hold a reference on routes
The code currently assumes that only FIB nodes can hold a reference on
routes. Therefore, after fib6_purge_rt() has run and the route is no
longer present in any intermediate nodes, it's assumed that its
reference count would be 1 - taken by the node where it's currently
stored.
However, we're going to allow users other than the FIB to take a
reference on a route, so this assumption is no longer valid and the
BUG_ON() needs to be removed.
Note that purging only takes place if the initial reference count is
different than 1. I've left that check intact, as in the majority of
systems (where routes are only referenced by the FIB), it does actually
mean the route is present in intermediate nodes.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:20 +0000 (13:28 +0200)]
ipv6: fib: Add offload indication to routes
Allow user space applications to see which routes are offloaded and
which aren't by setting the RTNH_F_OFFLOAD flag when dumping them.
To be consistent with IPv4, offload indication is provided on a
per-nexthop basis.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:19 +0000 (13:28 +0200)]
ipv6: fib: Dump tables during registration to FIB chain
Dump all the FIB tables in each net namespace upon registration to the
FIB notification chain so that the callee will have a complete view of
the tables.
The integrity of the dump is ensured by a per-table sequence counter
that is incremented (under write lock) whenever a route is added or
deleted from the table.
All the sequence counters are read (under each table's read lock) and
summed, prior and after the dump. In case the counters differ, then the
dump is either restarted or the registration fails.
While it's possible for a table to be modified after its counter has
been read, this isn't really a problem. In case it happened before it
was read the second time, then the comparison at the end will fail. If
it happened afterwards, then we're guaranteed to be notified about the
change, as the notification block is registered prior to the second
read.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:18 +0000 (13:28 +0200)]
ipv6: fib_rules: Dump rules during registration to FIB chain
Allow users of the FIB notification chain to receive a complete view of
the IPv6 FIB rules upon registration to the chain.
The integrity of the dump is ensured by a per-family sequence counter
that is incremented (under RTNL) whenever a rule is added or deleted.
All the sequence counters are read (under RTNL) and summed, prior and
after the dump. In case the counters differ, then the dump is either
restarted or the registration fails.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:17 +0000 (13:28 +0200)]
ipv6: fib: Add in-kernel notifications for route add / delete
As with IPv4, allow listeners of the FIB notification chain to receive
notifications whenever a route is added, replaced or deleted. This is
done by placing calls to the FIB notification chain in the two lowest
level functions that end up performing these operations - namely,
fib6_add_rt2node() and fib6_del_route().
Unlike IPv4, APPEND notifications aren't sent as the kernel doesn't
distinguish between "append" (NLM_F_CREATE|NLM_F_APPEND) and "prepend"
(NLM_F_CREATE). If NLM_F_EXCL isn't set, duplicate routes are always
added after the existing duplicate routes.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:16 +0000 (13:28 +0200)]
ipv6: fib: Add FIB notifiers callbacks
We're about to add IPv6 FIB offload support, so implement the necessary
callbacks in IPv6 code, which will later allow us to add routes and
rules notifications.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:15 +0000 (13:28 +0200)]
ipv6: fib_rules: Check if rule is a default rule
As explained in commit
3c71006d15fd ("ipv4: fib_rules: Check if rule is
a default rule"), drivers supporting IPv6 FIB offload need to be able to
sanitize the rules they don't support and potentially flush their
tables.
Add an IPv6 helper to check if a FIB rule is a default rule.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:14 +0000 (13:28 +0200)]
net: fib_rules: Implement notification logic in core
Unlike the routing tables, the FIB rules share a common core, so instead
of replicating the same logic for each address family we can simply dump
the rules and send notifications from the core itself.
To protect the integrity of the dump, a rules-specific sequence counter
is added for each address family and incremented whenever a rule is
added or deleted (under RTNL).
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:13 +0000 (13:28 +0200)]
rocker: Ignore address families other than IPv4
As in previous patch, ignore IPv6 notifications since the driver doesn't
support these.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:12 +0000 (13:28 +0200)]
mlxsw: spectrum_router: Ignore address families other than IPv4
We're about to add IPv6 notifications in the FIB notification chain, but
the driver currently doesn't support these, so ignore them.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 3 Aug 2017 11:28:11 +0000 (13:28 +0200)]
net: core: Make the FIB notification chain generic
The FIB notification chain is currently soley used by IPv4 code.
However, we're going to introduce IPv6 FIB offload support, which
requires these notification as well.
As explained in commit
c3852ef7f2f8 ("ipv4: fib: Replay events when
registering FIB notifier"), upon registration to the chain, the callee
receives a full dump of the FIB tables and rules by traversing all the
net namespaces. The integrity of the dump is ensured by a per-namespace
sequence counter that is incremented whenever a change to the tables or
rules occurs.
In order to allow more address families to use the chain, each family is
expected to register its fib_notifier_ops in its pernet init. These
operations allow the common code to read the family's sequence counter
as well as dump its tables and rules in the given net namespace.
Additionally, a 'family' parameter is added to sent notifications, so
that listeners could distinguish between the different families.
Implement the common code that allows listeners to register to the chain
and for address families to register their fib_notifier_ops. Subsequent
patches will implement these operations in IPv6.
In the future, ipmr and ip6mr will be extended to provide these
notifications as well.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Aug 2017 22:16:09 +0000 (15:16 -0700)]
Merge branch 'mvpp2-add-TX-interrupts-support'
Thomas Petazzoni says:
====================
net: mvpp2: add TX interrupts support
So far, the mvpp2 driver was using an hrtimer to handle TX
completion. This patch series adds support for using TX interrupts
(for each CPU) on PPv2.2, the variant of the IP used on Marvell Armada
7K/8K.
Dave: this version can be applied right away, it no longer depends on
Antoine's patch series. Antoine series had some comments, so he will
have to respin later on. Therefore, let's merge this smaller patch
series first.
Changes since v1:
- Rebased on top of net-next, instead of on top of Antoine's series.
- Removed the Device Tree patch, as it shouldn't go through the net
tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Thu, 3 Aug 2017 08:42:01 +0000 (10:42 +0200)]
dt-bindings: net: marvell-pp2: update interrupt-names with TX interrupts
The PPv2.2 unit has several interrupts used for TX completion
notification. This commit updates the Device Tree binding describing
this HW block to mention such interrupts.
While at it, we update the example to use a recent Device Tree
example, that uses interrupts going through the ICU, and not to the
GIC directly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Thu, 3 Aug 2017 08:42:00 +0000 (10:42 +0200)]
net: mvpp2: add support for TX interrupts and RX queue distribution modes
This commit adds the support for two related features:
- Support for TX interrupts, with one interrupt for each CPU
- Support for different RX queue distribution modes
MVPP2_QDIST_SINGLE_MODE where a single interrupt, shared by all
CPUs, receives the RX events, and MVPP2_QDIST_MULTI_MODE, where the
per-CPU interrupts used for TX events are also used for RX events.
Since additional interrupts are needed, an update to the Device Tree
binding is needed. However, backward compatibility is preserved with
the old Device Tree binding, by gracefully degrading to the original
behavior, with only one RX interrupt, and TX completion being handled
by an hrtimer.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Thu, 3 Aug 2017 08:41:59 +0000 (10:41 +0200)]
net: mvpp2: introduce queue_vector concept
In preparation to the introduction of TX interrupts and improved RX
queue distribution, this commit introduces the concept of "queue
vector". A queue vector represents a number of RX and/or TX queues,
and an associated NAPI instance and interrupt.
This commit currently only creates a single queue_vector, so there are
no changes in behavior, but it paves the way for additional
queue_vector in the next commits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Thu, 3 Aug 2017 08:41:58 +0000 (10:41 +0200)]
net: mvpp2: move from cpu-centric naming to "software thread" naming
The PPv2.2 IP has a concept of "software thread", with all registers
of the PPv2.2 mapped 8 times, for concurrent accesses by 8 "software
threads". In addition, interrupts on RX queues are associated to such
"software thread".
For most cases, we map a "software thread" to the more conventional
concept of CPU, but we will soon have one exception: we will have a
model where we have one TX interrupt per CPU (each using one software
thread), and all RX events mapped to another software thread
(associated to another interrupt).
In preparation for this change, it makes sense to change the naming
from MVPP2_MAX_CPUS to MVPP2_MAX_THREADS, and plan for 8 software
threads instead of 4 currently.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Thu, 3 Aug 2017 08:41:57 +0000 (10:41 +0200)]
net: mvpp2: introduce per-port nrxqs/ntxqs variables
Currently, the global variables rxq_number and txq_number hold the
number of per-port TXQs and RXQs. Until now, such numbers were
constant regardless of the driver configuration. As we are going to
introduce different modes for TX and RX queues, these numbers will
depend on the configuration (PPv2.1 vs. PPv2.2, exact queue
distribution logic).
Therefore, as a preparation, we move the number of RXQs and TXQs in
the 'struct mvpp2_port' structure, next to the RXQs and TXQs
descriptor arrays.
For now, they remain initialized to the same default values as
rxq_number/txq_number used to be initialized, but this will change in
future commits.
The only non-mechanical change in this patch is that the check to
verify hardware constraints on the number of RXQs and TXQs is moved
from mvpp2_probe() to mvpp2_port_probe(), since it's now in
mvpp2_port_probe() that we initialize the per-port count of RXQ and
TXQ.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Thu, 3 Aug 2017 08:41:56 +0000 (10:41 +0200)]
net: mvpp2: remove RX queue group reset code
The RX queue group allocation is anyway re-done later in
mvpp2_port_init(), so resetting it in mvpp2_init() is not very useful,
and will be annoying as we are going to rework the RX queue group
allocation logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Thu, 3 Aug 2017 08:41:55 +0000 (10:41 +0200)]
net: mvpp2: fix MVPP21_ISR_RXQ_GROUP_REG definition
The MVPP21_ISR_RXQ_GROUP_REG register is not indexed by rxq, but by
port, so we fix the parameter name accordingly. There are no
functional changes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Romain Perier [Thu, 3 Aug 2017 07:49:03 +0000 (09:49 +0200)]
net: arc_emac: Add support for ndo_do_ioctl net_device_ops operation
This operation is required for handling ioctl commands like SIOCGMIIREG,
when debugging MDIO registers from userspace.
This commit adds support for this operation.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Aug 2017 22:08:18 +0000 (15:08 -0700)]
Merge branch 'hns3-ethernet-driver'
Salil Mehta says:
====================
Hisilicon Network Subsystem 3 Ethernet Driver
This patch-set contains the support of the HNS3 (Hisilicon Network Subsystem 3)
Ethernet driver for hip08 family of SoCs and future upcoming SoCs.
Hisilicon's new hip08 SoCs have integrated ethernet based on PCI Express and
hence there was a need of new driver over the previous HNS driver which is
already part of the Linux mainline. This new driver is NOT backward
compatible with HNS.
This current driver is meant to control the Physical Function and there would
soon be a support of a separate driver for Virtual Function once this base PF
driver has been accepted. Also, this driver is the ongoing development work and
HNS3 Ethernet driver would be incrementally enhanced with more new features.
High Level Architecture:
[ Ethtool ]
^ |
| |
[Ethernet Client] [ODP/UIO Client] . . . [ RoCE Client ]
| |
[ HNAE Device ] |
| |
--------------------------------------------- |
| |
[ HNAE3 Framework (Register/unregister) ] |
| |
--------------------------------------------- |
| |
[ HCLGE Layer] |
________________|_________________ |
| | | |
[ MDIO ] [ Scheduler/Shaper ] [ Debugfs* ] |
| | | |
|________________|_________________| |
| |
[ IMP command Interface ] |
--------------------------------------------- |
HIP08 H A R D W A R E *
Current patch-set broadly adds the support of the following PF functionality:
1. Basic Rx and Tx functionality
2. TSO support
3. Ethtool support
4. * Debugfs support -> this patch for now has been taken off.
5. HNAE framework and hardware compatability layer
6. Scheduler and Shaper support in transmit function
7. MDIO support
Change Log:
V5->V6: Addressed below comments:
* Andrew Lunn: Comments on MDIO and ethtool link mode
* Leon Romanvosky: Some comments on HNAE layer tidy-up
* Internal comments on redundant code removal, fixing error types etc.
V4->V5: Addressed below concerns:
* Florian Fanelli: Miscellaneous comments on ethtool & enet layer
* Stephen Hemminger: comment of Netdev stats in ethool layer
* Leon Romanvosky: Comments on Driver Version String, naming & Kconfig
* Rochard Cochran: Redundant function prototype
V3->V4: Addressed below comments:
* Andrew Lunn: Various comments on MDIO, ethtool, ENET driver etc,
* Stephen Hemminger: change access and updation to 64 but statistics
* Bo You: some spelling mistakes and checkpatch.pl errors.
V2->V3: Addressed comments
* Yuval Mintz: Removal of redundant userprio-to-tc code
* Stephen Hemminger: Ethtool & interuupt enable
* Andrew Lunn: On C45/C22 PHy support, HNAE, ethtool
* Florian Fainelli: C45/C22 and phy_connect/attach
* Intel kbuild errors
V1->V2: Addressed some comments by kbuild, Yuval MIntz, Andrew Lunn &
Florian Fainelli in the following patches:
* Add support of HNS3 Ethernet Driver for hip08 SoC
* Add MDIO support to HNS3 Ethernet driver for hip08 SoC
* Add support of debugfs interface to HNS3 driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:52 +0000 (16:59 +0100)]
net: hns3: Add HNS3 driver to kernel build framework & MAINTAINERS
This patch updates the MAINTAINERS file with HNS3 Ethernet driver
maintainers names and other details. This also introduces the new
Makefiles required to build the HNS3 Ethernet driver and updates
the existing Kconfig file in the hisilicon folder.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:51 +0000 (16:59 +0100)]
net: hns3: Add Ethtool support to HNS3 driver
This patch adds the support of the Ethtool interface to
the HNS3 Ethernet driver. Various commands to read the
statistics, configure the offloading, loopback selftest etc.
are supported.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:50 +0000 (16:59 +0100)]
net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC
This patch adds the support of MDIO bus interface for HNS3 driver.
Code provides various interfaces to start and stop the PHY layer
and to read and write the MDIO bus or PHY.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:49 +0000 (16:59 +0100)]
net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver
THis patch adds the support of the Scheduling and Shaping
functionalities during the transmit leg. This also adds the
support of Pause at MAC level. (Pause at per-priority level
shall be added later along with the DCB feature).
Hardware as such consists of two types of cofiguration of 6 level
schedulers. Algorithms varies according to the level and type
of scheduler being used. Current patch is used to initialize
the mapping, algorithms(like SP, DWRR etc) and shaper(CIR, PIR etc)
being used.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:48 +0000 (16:59 +0100)]
net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support
This patch adds the support of Hisilicon Network Subsystem Accceleration
Engine and common operations to access it. This layer provides access to the
hardware configuration, hardware statistics. This layer is also
responsible for triggering the initialization of the PHY layer through
the below MDIO layer.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:47 +0000 (16:59 +0100)]
net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support
This patch adds the support of IMP (Integrated Management Processor)
command interface to the HNS3 driver.
Each PF/VF has support of CQP(Command Queue Pair) ring interface.
Each CQP consis of send queue CSQ and receive queue CRQ.
There are various commands a PF/VF may support, like for Flow Table
manipulation, Device management, Packet buffer allocation, Forwarding,
VLANs config, Tunneling/Overlays etc.
This patch contains code to initialize the command queue, manage the
command queue descriptors and Rx/Tx protocol with the command processor
in the form of various commands/results and acknowledgements.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:46 +0000 (16:59 +0100)]
net: hns3: Add support of the HNAE3 framework
This patch adds the support of the HNAE3 (Hisilicon Network
Acceleration Engine 3) framework support to the HNS3 driver.
Framework facilitates clients like ENET(HNS3 Ethernet Driver), RoCE
and user-space Ethernet drivers (like ODP etc.) to register with HNAE3
devices and their associated operations.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil [Wed, 2 Aug 2017 15:59:45 +0000 (16:59 +0100)]
net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC
This patch adds the support of Hisilicon Network Subsystem 3
Ethernet driver to hip08 family of SoCs.
This driver includes basic Rx/Tx functionality. It also includes
the client registration code with the HNAE3(Hisilicon Network
Acceleration Engine 3) framework.
This work provides the initial support to the hip08 SoC and
would incrementally add features or enhancements.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Aug 2017 16:45:48 +0000 (09:45 -0700)]
Merge branch 'sctp-remove-typedefs-from-structures-part-4'
Xin Long says:
====================
sctp: remove typedefs from structures part 4
As we know, typedef is suggested not to use in kernel, even checkpatch.pl
also gives warnings about it. Now sctp is using it for many structures.
All this kind of typedef's using should be removed. This patchset is the
part 4 to remove it for another 14 basic structures from linux/sctp.h.
After this patchset, all typedefs are cleaned in linux/sctp.h.
Just as the part 1-3, No any code's logic would be changed in these patches,
only cleaning up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>