radv: init states from pTessellationState at only one place

It's part of the pre-rasterization state of graphics pipeline libs.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16552>

tu: Implement VK_EXT_pipeline_creation_cache_control

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16562>

tu: Implement VK_EXT_pipeline_creation_feedback

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16562>

tu: Zero-initialize compute driver key

Fixes: 05329d7 ("tu: Implement pipeline caching with shared Vulkan cache")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16562>

drirc: Set limit_trig_input_range option for glmark2

This fixes jellyfish rendering issues in glmark2 on Intel.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6479
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16525>

freedreno/a6xx: Add EARLYPREAMBLE flag to all a6xx_sp_xs_ctrl_reg0

Each shader stage has its own "early preamble" flag.

Early preamble is likely an optimization to hide some of latency
when loading UBOs into consts in the preamble.

Early preamble has the following limitations:
- Only shared, a1, and consts regs could be used
  (accessing other regs would result in GPU fault);
- No cat5/cat6, only stc/ldc variants are working;
- Values writen to shared regs are not accessible by the rest
  of the shader;
- Instructions before shps are also considered to be a part of
  early preamble.

Note, for all shaders from d3d11 games blob produced preambles
compatible with early preamble mode.

Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15901>

Revert "st/mesa: Transcode ASTC to BC7 (BPTC) where possible"

This reverts commit 68ef895674b176b4faf875a4d7f4d787b330d4d9.

When trying out transcode_astc=true with BPTC on Asphalt 9, we observed
very poor image quality - to the point that basic UI icons were blocky,
and buttons with a black border had smeared pixels on the edges.  Using
DXT5 had no such issues.

I originally suspected there was a bug in the BPTC encoder, but I now
believe the issue is deeper than that.  The commit that introduced the
encoder, 17cde55c538009764207bd29b78a909d2c5d14b4, says:

   "The compressor is written from scratch and takes a very simple
    approach.  It always uses a single mode of the BPTC format (4 for
    unorm and 3 for half-floats) and picks the two endpoints by dividing
    the texels into those which have more or less than the average
    luminance of the block and then calculating an average color of the
    texels within each division.

    It's probably not really sensible to try to use BPTC compression at
    runtime because for example with the Nvidia offline compression tool
    it can take in the order of an hour to compress a full-screen image.
    With that in mind I don't think it's worth having a proper compressor
    in Mesa and this approach gives reasonable results for a usage that
    is basically a corner case."

In other words, the reason our BPTC compressor was so fast is that it
only implements one of the modes and does a low quality approximation.
This honestly should probably be improved somewhat, but the original
use case was for online-compression, the uncommon but mandatory OpenGL
feature where you can supply uncompressed data and trust the driver to
compress it for you (at unknown and uncontrolled quality and speed).

Unfortunately, the compressor as it stands is simply not usable for
transcoding ASTC data where we want to preserve the underlying image
quality as much as possible.

Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16566>

radeonsi: fix glTexBuffer max size handling

The spec says the number of texels must be clamped to the value of
GL_MAX_TEXTURE_BUFFER_SIZE.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Mihai Preda <mhpreda@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16480>

docs: update extensions for V3D and VC4

Mark some extensions that are already supported by V3D and VC4.

Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16528>

radv: add new pipeline helpers for NIR->ASM compilation

It walks backwards to compile, looks cleaner to me.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16553>

radv: do not try to dump the NIR of the trap handler shader

There is no NIR at all.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16553>

radv: rename shader compile functions to spirv_to_nir/nir_to_asm

For better clarity.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16553>

radv/ci: enable the experimental support for mesh shaders

The experimental support has been merged for months already, but has
been left unexercised in CI even though dEQP has a mesh_shader.nv
category.

This commit enables the experimental support, which should bring
additional testing \o/.

Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16550>

ci: Disable jobs to the Collabora lab

In anticipation of infrastructure work.

This commit is to be reverted later in the day.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16576>

vulkan/pipeline_cache: Implement deserialize for raw objects

When caching NIR, it's cached as a raw object because we cache the
serialized NIR.  When it's then loaded from the disk cache later, we
fail to deserialize it because raw objects are a special case.  There
are two callers of vk_pipeline_cache_object_deserialize(), one of which
has a special case for raw objects and the other is called only when
we've checked that it isn't a raw object.  The special cases are
pointless; raw objects should deserialize themselves.

Fixes: 591da9877900 ("vulkan: Add a common VkPipelineCache implementation")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16281>

zink: add ZINK_DEBUG=sync

this is great for debugging

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16544>

zink: add c++ guards for zink_screen.h

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16544>

zink: fix non-dynamic vertex stride update flagging

without dynamic vertex input, pipeline vertex state must be recalculated
if buffer strides change or the enabled buffer mask changes in order
to accurately handle dynamic state stride VUs

cc: mesa-stable

fixes:
spec@!opengl 1.1@array-stride

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: handle PIPE_BUFFER sparse texture queries

this is legal but was never handled

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: clamp 1D_ARRAY sparse textures to 2D as needed

forgot to handle this case

cc: mesa-stable

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: force render target usage for sampler-only resources

these might hit u_blitter later, which will require rt usage
to handle texture views, so add rt usage now to avoid failing later

cc: mesa-stable

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: fix surface/bufferview cache comparisons

these caches ignore pNext from the create info since the pNext cannot
affect the eventual object that is created, so comparing it will break
the hash table

cc: mesa-stable

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: add extended usage and retry if resource creation fails

this is one of those cases where some bizarro format is being created
for sampling only, but gallium blasts out all the bind flags at once

trust that we're not going to do anything too crazy and let surface
usage pruning handle the rest

cc: mesa-stable

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: remove input attachment usage when pruning surface usage

if the format doesn't support color attachment, it doesn't need to
be an input attachment

cc: mesa-stable

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: add extra validation for resource creation

check image params against driver's returned limits to avoid
failing later

cc: mesa-stable

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: add separate error message for push descriptor set alloc fail

PRO triggers this if input attachments are used

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

zink: only reject non-blittable resource creation if it has no other binds

the idea here is that if a resource is intended to be used solely as a rendertarget
and can't be blitted to or drawn to, then resource creation should fail

but if the resource might be e.g., a texture, then it can probably hit the subdata
path and be fine

Fixes: 37ac8647fca ("zink: reject resource creation if format features don't match attachment")

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16563>

wgl: Add driver_zink as a dependency of the wgl frontend

Fixes: 01ed71f9451 ("wgl: support kopper")

Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16569>

zink: never create a sw context unless sw is requested

this otherwise makes it impossible to accurately do hardware driver
fallback, as zink will create a sw context instead of failing, superceding
the actual sw driver priorities

Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16572>

lavapipe: support instance rate zero for VK_EXT_vertex_attribute_divisor

gallium can't directly support vertex attribute instance rate zero, since
the instance rate is also used to determine if the data is per-vertex or
per-instance in the first place (hence divisor zero meaning the data is
per vertex).
While it's an optional feature for VK_EXT_vertex_attribute_divisor, some
apps require it to work (it's a standard d3d10 feature and widely
supported), hence translate it away as MAX_UINT32 divisor instead (which
at this point probably makes more sense than to change the gallium
interface), which should work all the same.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16526>

glsl: Drop this != NULL assertions

If this == NULL, we'll get a crash which is pretty much the same thing
when it comes to ease of debugging.  This fixes a giant pile of warnings
with GCC 12 of the form:

    ../src/compiler/glsl/ir.h: In member function ‘ir_dereference* ir_instruction::as_dereference()’:
    ../src/util/macros.h:149:30: warning: ‘nonnull’ argument ‘this’ compared to NULL [-Wnonnull-compare]
      149 | #define assume(expr) ((expr) ? ((void) 0) \
          |                      ~~~~~~~~^~~~~~~~~~~~~~
      150 |                              : (assert(!"assumption failed"), \
          |                              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      151 |                                 __builtin_unreachable()))
          |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~
    ../src/compiler/glsl/ir.h:150:7: note: in expansion of macro ‘assume’
      150 |       assume(this != NULL);                             \
          |       ^~~~~~
    ../src/compiler/glsl/ir.h:160:4: note: in expansion of macro ‘AS_BASE’
      160 |    AS_BASE(dereference)

Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16558>

turnip: fix off-by-one in border color bitset

BITSET_FFS reserves 0 for no bit set.  BITSET_CLEAR just below cleared
the wrong bit.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16567>

iris: Add FLUSH_HDC to PIPE_CONTROL_CACHE_FLUSH_BITS

This is considered a bottom-of-pipe flush bit.

Fixes: a969ad1ddfd ("iris: Demote DC flush to HDC flush in cache tracker")
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16565>

zink: add an anv-tgl ci job

Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16497>

meson: Support d3d12 as a video-supporting driver

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add GLSL singleton refcounting to screen for offscreen non-GL rendering

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add support for d3d12 video in d3d12_screen

Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Improve planar resource support to handle video requirements

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add util video functions to d3d12_format

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add create_video_codec and create_video_buffer entrypoints

Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add video encode implementation of pipe_video_codec

Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add video decode implementation of pipe_video_codec

Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

ci: Update x86 debian build to pick up tag v1.602.0-r1 from DirectX-Headers

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add d3d12_promote_to_permanent_residency

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium va: VaHandlePictureParameterBufferH264 fill out new pipe params
MinLumaBiPredSize8x8, pic_init_qs_minus26, chroma_format_idc,
bit_depth_chroma, bit_depth_chroma_minus8

Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium vdpau: Fill out level_idc and MinLumaBiPredSize8x8

Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium omx: Fill out MinLumaBiPredSize8x8 and pic_init_qs_minus26

Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium: Add MinLumaBiPredSize8x8 to pipe_h264_sps, pic_init_qs_minus26 to pipe_h264_pps

Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium radeon/r600/omx/va: Adds support for multiple reference encoding

gallium: pipe_h264_enc_picture_desc: ref_idx_lx to ref_idx_lx_list[32], add num_ref_idx_lx_active_minus1
gallium radeon/r600: Change usage of ref_idx_lx to ref_idx_lx_list
gallium omx: Fill out ref_idx_lx_list, num_ref_idx_lx_active_minus1
gallium va: Add support for multiple references encoding

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium va: Add support for multiple slices encoding

Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium: Add multiple slice support to pipe_h264_enc_picture_desc

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium va: Handle new VA attributes with new pipe video caps

Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium: Add values to pipe_video_cap for multi-slice and multi-reference encode

Acked-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium va: VaDeriveImage support stride/offset being different for NV12 planes

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium/va/radeonsi: Using private as a parameter name conflicts with C++ keywords

Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

d3d12: Add .clang_format file

Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

st_vdpau: Pass format when opening resource from handle in st_vdpau_resource_from_description

Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

util/vl_vlc: Support compiling in C++

Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

util/u_format: Drop assert that has valid/well-defined behavior

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

gallium/vl: Add software winsys and offscreen winsys

Acked-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16286>

dri2: Require a loader with working buffer invalidation

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10808>

glx/dri2: Require DRI2 >= 1.3 for working buffer invalidation

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10808>

zink: fix pointer size conversion warning

fixes:  34e62bfa

Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16532>

intel/perf: deal with OA reports timestamp values on DG2

OA reports on XeHP have their timestamp shifted to the left by 1. To
get that back in the same time domain as the REG_READ you need to
shift it back to the right and you're loosing the top bit.

v2: use ull for 64bit constant (Ian)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: disable sseu setting on Gfx12.5+

This is rejected by i915.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: add new layout for Gfx12.5 products

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: add max vfuncs

New counters will use those from inside their read function to
generate percentage numbers.

v2: Forgot to update Iris (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: add support new variable counting the number of EUs in slice0-3

v2: MIN2(4, max_slices) (Marcin)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: add OA A counter type

On Gfx12.5 products, we'll need to capture a couple of A counters that
are not captured in MI_RPC reports. Those are actually global,
previously all A counters were per context.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: stop overriding oa_format

This already set in the intel_perf_setup.h file at metric set
creation.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: add support for GtSlice/GtSliceXDualsubsliceY variables

For those, we'll fish the information out of the devinfo.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: add support for dualsubslice count variable

This is the same as the subslice count.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: store a copy of devinfo

In the future we'll pull more information off devinfo.

v2: Constify pointers (Ian)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

intel/perf: add support for new opcodes in code generation

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16144>

venus: Don't encode ignored pTessellationState

The spec says that VkGraphicsPipelineCreateInfo::pTessellationState is
ignored and may be an invalid pointer in some cases. When ignored,
patch the pCreateInfo with `pTessellationState = NULL`, so the encoder
doesn't attempt to encode an invalid pointer.

Tested in Borealis, with debug build of venus, with a minimal test app
that sets `.pTesselationState = 0x17`. Pre-patch, the app crashes;
post-patch, the app works.

Signed-off-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16284>

venus: Refactor vn_fix_graphics_pipeline_create_info

We currently do only a single fix. Prepare to do multiple independent
fixes.

Signed-off-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16284>

vl: fix codec checks to disable properly

This was wrong and enabled codecs where they shouldn't have been.

Fixes: 7ab05e3c3fe3 ("gallium/vl: respect the video codecs configure in meson")
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16542>

meson: add build-id to pipe libraries

Without this the cache setup was crashing with CL and the dynamic
pipe libraries.

Reported and debugged on irc by consolers

Cc: mesa-stable
Acked-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16341>

r600/sb: Fall back to un-optimized shader if scheduling fails

Sometimes the optimizer created codes that can't be scheduled,
instead of failing completely, simply bail out and use the
un-optimized code.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16499>

r600/sb: Don't create three source ops with all kcache values

There is a good chance that the created instruction can't be
scheduled, so avoid this case.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16499>

radv: Use vk_image_view as the base for radv_image_view

I've left the extent field because, even though it looks like it should
be roughly equivalent, it's weirdly different on different hardware and
I didn't want to mess with it.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

radv: Use vk_image as the base for radv_image

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

radv: Only use PLANE_0 in meta when actually needed

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

vulkan,v3dv: Add a driver_internal flag to vk_image_view_init/create

We already had a little workaround for v3dv where, for some if its meta
ops, it had to bind a depth/stenicil image as color.  Instead of
special-casing binding depth/stencil as color, let's flip on the
drier_internal flag and get rid of most of the checks in that case.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

v3dv: Drop the region temporary from blit_shader

We're no longer stomping aspects, so there's no need.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

v3dv: Don't use color aspects for depth/stencil images

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

vulkan: Only be clever about vk_image_view::view_format for normal views

For color view of depth views, just set whatever format they asked for.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

v3dv: Add a create_image_view helper for internal views

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16376>

aco: use ac_is_llvm_processor_supported() for checking LLVM asm support

It seems more universal but it's needed to create a temporary TM.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16494>

radv: do not lower loading TESS/ESGS rings using the ABI for LLVM

LLVM uses an implicit argument for the ring offsets and this lowering
was just broken.

This fixes tessellation and geometry on all generations with LLVM.

Fixes: 896a55f47d9 ("radv: Lower ABI in NIR for tess/ESGS/NGG shader arguments.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16530>

asahi: Fix hangs waiting on the notification queue

Dequeue and WaitForAvailableData can race. Restructure the loop to avoid
this. Fixes all timeouts in dEQP.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16518>

i915g/ci: Add depth-clear-precision-check xfails like everyone else.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16390>

ci/crocus: Merge the piglit runs with the deqp runs.

Fewer manual buttons to click.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16390>

ci/crocus: Manual CI updates after CI was down for a bit.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16390>

Revert "radv: Make fill_buffer_shader non-static"

We do not need this any longer since
radv_acceleration_structure.c uses
radv_fill_buffer now instead.

Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16517>

radv: Use radv_fill_buffer for accel struct builds

It turns out, that the fuchsia sort may actually
perform clears with size < 16 which hits an assert
in radv_fill_buffer_shader. This fixes random
crashes in Control.

Fixes: be57b08 ("radv: Build accaleration structures using LBVH")
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16517>

radv: Allow radv_fill_buffer to work with VAs only

Makes the bo parameter optional which is useful
for the clears performed by acceleration structure
build commands.

Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16517>

Revert "mesa: consider the sample count when choosing a texture format"

This reverts commit 89c94502b6650fed222abd3588e9c927811580aa.

Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16524>

Revert "frontend/dri: allow swapped BGR->RGB channel order for MSAA color buffers"

This reverts commit cfec9a55ea6a1cd535ea60aeff7f7bd85dd64bb5.

Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16524>

radeonsi: fix resource_copy_region with ETC formats (e.g. for Stoney)

Only Stoney, Vega10, Raven, and Raven2 support ETC.

Fixed tests:
  dEQP-GLES31.functional.copy_image.mixed.viewclass_64_bits_mixed.r11_eac_rgba16i.texture2d_to_texture2d
  dEQP-GLES31.functional.copy_image.mixed.viewclass_64_bits_mixed.r11_eac_rgba16ui.texture2d_to_texture2d
  dEQP-GLES31.functional.copy_image.mixed.viewclass_64_bits_mixed.signed_r11_eac_rgba16i.texture2d_to_texture2d
  dEQP-GLES31.functional.copy_image.mixed.viewclass_64_bits_mixed.signed_r11_eac_rgba16ui.texture2d_to_texture2d

Fixes: cf1e562fdd7 - radeonsi: remove compressed and subsampled gfx copy from resource_copy_region
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6431

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16491>