tests/webrtc: fix a race in the tests related to state tracking

If things progress fast enough, some state changes may not be seen be
the waiting code.

Fix by:
1. keeping a list of all the state changes
2. waiting checks each entry and if the relevant state is found, all
   states up to and including then are removed.

This ensures that any waits will see all the state sets.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

tests/webrtc: factor out src pad property checking to a separate function

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: initial support for sending and receiving simulcast streams

Input (sink pads) is the already-ssrc-muxed stream with the relevant rtp
sdes header extensions already applied:
  - mid
  - stream-id
  - repaired-stream-id

Output (src pads) have the pads separated into individual ssrc's as
that's what rtpbin gives us.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

tests/webrtc: test for enabled bundled fec/rtx

Doesn't actually check that any fec/rtx happens, just that the pipeline
is vaguely sane and doesn't error.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: support multiple received streams for a single mline

Each rtpbin exposed recv_src pad is now exposed as webrtcbin src_%u pad
now with no meaining applied to the value of %u.  Previously this used
to mean the mline in the SDP.  If this is is still required, then the
transceiver can be retrieved from the pad and the "mlineindex" property
from the transciever.  The "mid" is also retrievable from the
transceiver.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtc: explicitly error out in a couple of renegotiation cases

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtc/transportstream: add debug category

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

tests/webrtc: also check valid mline for srcpad codec-preferences negotiation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: don't name src pads based on the mline specifically anymore

Naming based on the mline doesn't really work with e.g. simulcast
scenarios.

It is entirely possible to retrieve the transceiver and then the mline
from that if that is so required.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtc/tests: print the correct media idx on error

Instead of the attribute index

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtc/tests: give slightly better names to the dot file dumps

Don't use printf-specifiers with g_strconcat().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: improve some debugging output

- Put human readable names into debug strings.
- Demote some frequent rtpbin signal logging
- Don't use GST_PTR_FORMAT in g_set_error()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: silence spurious warning when creating answer transceiver

When creating a transceiver when creating an answer, the media kind of the
transceiver was never set correctly initially.  This would lead to a
GST_WARNING being produced about changin a transceiver's media kind.

Fix by retrieving the GstSDPMedia kind from the offer instead as the answer
GstSDPMedia has not been set as the answer caps have not been chosen yet.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

tests/webrtc: always use a unique SSRC for each stream

Will become more relevant with mid/rid->ssrc mappings

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: add a specific find_transceiver_by_mid function

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: explicitly use a variable for the rtp session idx

Slightly clearer in meaning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

webrtcbin: support using an a=mid value from the sink/transceiver caps

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>

va: Set <gst/va/gstva.h> as library single point entry header.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>

va: Move allocators and pool objects into gstva library.

In order to other plugins use gstva objects, such as allocators and buffer
pools, this merge request move them from the va plugin to the gstva library.

This objects are not exposed in <gst/va/gstva.h> since they are not expected
to be used by users, only by plugin implementators.

Because of the surface copy design, which is used to implement allocator's
mem_copy() virtual function, depends on the vafilter, which is kept inside
the plugin, memory copy through VAPosproc is disabled and removed temporarly.

Also added some missing parameter validation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>

va: Move the video format functions into gstlibva.

Untabifying header file.

The logging category was moved from the plugin generic category to
the display category. It can argue that video formats hacks are
display dependant.

Added validations for input parameters.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>

meson: Add some messages when selecting libsoup

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>

soup: Fix usage of symbols / defines that are gone in libsoup3

I am not sure about the SOUP_MESSAGE_OVERWRITE_CHUNKS change, but it
was definitely already broken when using libsoup-3.0 in a shared
build. souphttpsrc probably needs to be ported from SoupMessage to
SoupServerMessage when using libsoup-3.0.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1111

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>

soup: Fix pre-processor macros in souploader for libsoup-3.0

Some of the preprocessor conditionals in the loader were very broken
with libsoup-3.0 + --default-library=static

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1111

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>

pbutils: Fix wmv screen detection

strncmp vs !strncmp :)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2050>

ges: remove memory leak with description

free the capsdesc

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2047>

nle: clear seek event properly

Use gst_clear_event instead of g_clear_object
avoiding a failing gobject unref

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2047>

qsvencoder: Add support for dynamic bitrate update

... and add more encoding options.

QSV API supports dynamic bitrate change without IDR insertion.
That's more efficient way of runtime encoding option update
than starting from new sequence with IDR per bitrate option change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>

qsvh265enc: Add missing gop-size property

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>

qsv: Fix mfxFrameAllocator::Lock for encoder

Only read map is possible for encoder input system memory

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>

python: Add a suppression file for a leak in PyGObject

And ensure that the CI runs GES valgrind test when we change the
overrides as many GES tests are implemented in python

Proper fix is at: https://gitlab.gnome.org/GNOME/pygobject/-/merge_requests/204

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2060>

avviddec: Remove vc1/wmv3 override

FFMPEG 5+ doesn't allow overriding the codec anymore (causes a segfault if you
attempt to do that). But the best part is ... that with the current caps
implementation in pad template and gst_ffmpeg_caps_to_codecid() we would never
replace it by anything different than the existing codec id.

Fixes #1054

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2052>

docs: Fix doc generation example

They need to be generated from the devenv else it just hangs for no reason.

See #1108

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2051>

python: Add support for the GstURIHandlerInterface

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1423>

validate/media-info: silence unsed variable warning

Fixes:

../validate/gst/validate/gst-validate-media-info.c:714:28: error: variable 'total_sink_count' set but not used [-Werror,-Wunused-but-set-variable]
  guint id, ncounters = 0, total_sink_count = 0;
                           ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

rtsp-stream: remove unused variable:

Fixes:

../gst/rtsp-server/rtsp-stream.c:2670:9: error: variable 'n_messages' set but not used [-Werror,-Wunused-but-set-variable]
  guint n_messages = 0;
        ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

applemeida/texturecache: remove unused variable

Fixes:

../sys/applemedia/videotexturecache.m:71:20: error: variable 'features' set but not used [-Werror,-Wunused-but-set-variable]
  GstCapsFeatures *features;
                   ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

applemedia/corevideobuffer: remove unused variable

Fixes:

../sys/applemedia/corevideobuffer.c:209:19: error: variable 'video_meta' set but not used [-Werror,-Wunused-but-set-variable]
    GstVideoMeta *video_meta;
                  ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

applemedia/iosgl: remove unused variable

Fixes:

../sys/applemedia/iosurfaceglmemory.c:219:41: error: variable 'texfmt' set but not used [-Werror,-Wunused-but-set-variable]
    GLuint tex_id, tex_target, texifmt, texfmt;
                                        ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

vtdec: remove unused variable

Fixes:

../sys/applemedia/vtdec.c:611:35: error: variable 'output_flags' set but not used [-Werror,-Wunused-but-set-variable]
  VTDecodeFrameFlags input_flags, output_flags;
                                  ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

avsamplevideosink: remove unused variable

Fixes

../sys/applemedia/avsamplevideosink.m:80:20: error: variable 'gstelement_class' set but not used [-Werror,-Wunused-but-set-variable]
  GstElementClass *gstelement_class;
                   ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

avfassetsrc: fix unused-but-set warning

../sys/applemedia/avfassetsrc.m:1014:12: error: variable 'caps' set but not used [-Werror,-Wunused-but-set-variable]
  GstCaps *caps;
           ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

speed: fix unused-but-set warning

../gst/speed/gstspeed.c:523:39: error: variable 'base' set but not used [-Werror,-Wunused-but-set-variable]
      gint64 start_value, stop_value, base;
                                      ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

resindvd: silence unused-but-set warning

../ext/resindvd/gstpesfilter.c:117:11: error: variable 'STD_buffer_size_bound' set but not used [-Werror,-Wunused-but-set-variable]
  guint16 STD_buffer_size_bound;
          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

mpegts: don't shadow res variable

Fixes unused-but-set warning:

../gst/mpegtsmux/gstbasetsmux.c:2115:43: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
      gboolean all_headers, done = FALSE, res = FALSE;
                                          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

mpeg: fix unused-but-set warning

../gst-libs/gst/mpegts/gst-dvb-section.c:206:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
  guint i = 0, allocated_events = 12;
        ^
../gst-libs/gst/mpegts/gst-dvb-section.c:365:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
  guint i = 0, allocated_streams = 12;
        ^
../gst-libs/gst/mpegts/gst-dvb-section.c:543:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
  guint i = 0, allocated_streams = 12;
        ^
../gst-libs/gst/mpegts/gst-dvb-section.c:885:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
  guint i = 0, allocated_services = 8;
        ^
../gst-libs/gst/mpegts/gst-dvb-section.c:1316:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
  guint i = 0, allocated_services = 8;
        ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

osxcoreaudio: fix unused-but-set warning

../sys/osxaudio/gstosxcoreaudio.c:480:18: error: variable 'interleaved' set but not used [-Werror,-Wunused-but-set-variable]
  gboolean sign, interleaved;
                 ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>

video-format: Move NV12_8L128 into the correct position in GST_VIDEO_FORMATS_ALL

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2045>

mpegdemux: silence unused-but-set werror

../gst/mpegdemux/gstpesfilter.c:117:11: error: variable 'STD_buffer_size_bound' set but not used [-Werror,-Wunused-but-set-variable]
  guint16 STD_buffer_size_bound;
          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2044>

Fix GstAmcSurfaceTexture segfault
Check that `self` and `self->callback` are defined. `self` can be set to
`NULL` in `remove_listener`, and `self->callback` can be set to `NULL`
inside `gst_amc_surface_texture_jni_set_on_frame_available_callback`.
This can cause a segfault since the Java object can outlive the C
object, and call the callback after `remove_listener` is called.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2024>

examples/player/android: add missing dummy.cpp

allows libc++_shared.so to be placed in the application

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2043>

deinterlace: silence unused-but-set werror from imported code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2042>

examples/player/android: update for android changes

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2041>

osxvideosink: fix unused-but-set-variable warning

../sys/osxvideo/osxvideosink.m:859:11: error: variable 'data' set but not used [-Werror,-Wunused-but-set-variable]
  guint8 *data, *readp, *writep;
          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2040>

rawvideoparse: set format from caps in gst_raw_video_parse_set_config_from_caps

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1970>

glmixerbin: slightly better pad/element creation

Use the return value from gst_element_link_pads() and gst_bin_add()

Fixes:

../ext/gl/gstglmixerbin.c:305:12: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
  gboolean res = TRUE;
           ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2038>

ccconverter: ensure correct ordering of cea608 across output buffers

e.g. if a 60fps output is configured, we can only produce a single field
of cea608 that must alternate between field 1 and field 2.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2019>

ccconverter: ignore padding cea608 data even if marked as 'valid'

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2019>

v4l2codecs: Detect missing M2M_HOLD_CAPTURE_BUF

Produce an error if we try to use the feature of holding capture buffer
but it is not supported by the driver. Ingoring this can lead to stalls
as the driver will run-out of capture buffer to decode into. This
affects slice decoders but also split-field interlaced decoding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>

v4l2codecs: h264: Set other field poc if available

Whenever the other field POC is available, pass it back to the
driver. This should not be strictly required, but it makes things
easier to debug and more forgiven.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>

v4l2codecs: Trace request by it FD

This helps when crossing the debug logs with the kernel logs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>

v4l2codecs: h264: Fix dpb entry flag FLAG_FIELD

The logic to guess back this value was broken. Use the value
now saved into the picture instead. This was tested using
LibreELEC patched 5.15 kernel, and fixed the interlaced decode
issues.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>

codecs: h264: Save the field_pic_flag

This flag is set when the stream is interlaced and the specific
slice is made of single parity fields rather the paired at the
macroblock layer. This is rarely needed in late decoding process
but the Rockchip RKVDEC HW interface requires it, hence needs to
be passed through V4L2 Stateless interface.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>

d3d11: Fix example build error

```
../subprojects/gst-plugins-bad/tests/examples/d3d11/d3d11device.cpp:129:50: error: invalid conversion from ‘int’ to ‘DXGI_FORMAT’ [-fpermissive]
  129 |     D3D11_SHADER_RESOURCE_VIEW_DESC srv_desc = { 0, };
```

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2029>

gl: cocoa: fix warnings of unused variables

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2026>

Fetch libxml2 subproject using http instead of ftp

The official releases of libxml2 have been migrated to gitlab where
they are published for download via HTTP instead of FTP. Besides
adapting to the new location we now also get the benefit that the
tarball can be downloaded in restricted networks where FTP might be
blocked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2020>

navigationtest: Add some support for modifiers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2010>

navigation: Add support for key Modifiers in all relevant events

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2010>

va: h265dec: Fix a crash because of missing reference frame.

Some problematic H265 stream may miss the reference frame in the DPB,
and get some message like: "No short term reference picture for xxx".
So there may be empty entries in ref_pic_list0/1 when passing to
decode_slice() function of sub class. We need to check the NULL pointer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2018>

openexr: Specify modules when finding OpenEXR.

Specify modules to look for OpenEXR when CMake is used, as we may have
CMake config files instead of pkg-config files that result from building
OpenEXR, which may be built with CMake which is typically the case on Visual
Studio builds.

In this case, Meson does seem to find the 'OpenEXR' package with CMake
after trying pkg-config, but does not consider it enough without the
'modules:' argument.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2014>

webrtcbin: Update documentation of 'get-stats' action signal

Some stats fields are updated according to the current implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2005>

rtpptdemux: fix leak of caps when ignoring a pt

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2025>

Revert "webrtcbin: fix msid line and allow customization"

This reverts commit 3cad3455377d5a22faa138d9df840257059776c8.

That commit was breaking the association between an audio and
a video track in the standard case.

In practice, to support carrying separate MediaStream, we are
going a way to map what MediaStreamTrack belong to what MediaStream,
but that will require some thinking about the API.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2023>

tsdemux: Don't check SCTE events for being too far from the PCR

Otherwise it happens that SCTE events can only be scheduled up to 15
seconds since the last seen PCR, which is a useless restriction.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2021>

navigation: Add missing annotation to send_event_simple

Adds the missing "transfer full" annotation for the event argument.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2017>

webrtcbin: fix msid line and allow customization

From https://datatracker.ietf.org/doc/html/draft-ietf-mmusic-msid-16:

> Multiple media descriptions with the same value for msid-id and
> msid-appdata are not permitted.

Our previous implementation of simply using the CNAME as the msid
identifier and the name of the transceiver as the msid appdata was
misguided and incorrect, and created issues when bundling multiple
video streams together: the ontrack event was emitted with the same
streams for the two bundled medias, at least in Firefox.

Instead, use the transceiver name as the identifier, and expose
a msid-appdata property on transceivers to allow for further
customization by the application. When the property is not set,
msid-appdata can be left empty as it is specified as optional.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2003>

webrtc: Update dependencies of the Rust examples

And also clean up code a bit while updating to new APIs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2016>

Fix license as GES is released under the LGPL2+ license

This was a mistake that some of the licensing notice in a few files was
referring to GPL3+ and it needs fixing

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1956>

wpe: Mark first audio buffer as discont

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1492>

wpe: Use `about:blank` as default URL to support only using load-bytes

WebKit is not going to render anything until a URI is set, leading to a
WPE posting a `WPE View did not render a buffer` error message. To avoid
requiring the user to know it if they only want to use
`wpesrc::load-bytes` we can just use `about:blank` as default and
everything will work as users would expect.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1492>

validate:scenario: Support args in the `emit-signal` action

This was never needed before but it is generally useful and there
was a todo about it

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1492>

webrtc_sendrecv.py: Link pads instead of elements

This was not a problem here because even if we end up accidentally
linking to the wrong pad, things will work out eventually as long as
one pad-added is emitted for each pad that is added.

But it will be a huge problem if someone copies this code and changes
something that requires different handling for different sorts of
pads. The resultant code will be racy. Let's not do this, it's a bad
example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2008>

README: update documentation for macOS

Give hints regarding the certificates
needed by Python.

urllib.error.URLError: urlopen error [SSL ..

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1794>

fakevideosink,fakeaudiosink: Proxy handoff and preroll-handoff signals

Proxy signals for application to be able to consume them

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1585>

aom: av1enc: Specify Temporal Unit alignment

Encoded bitstream consists of leading Temporal delimiter OBU
with frame, that's Temporal Unit alignment.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1471>

qsvencoder: Clear caps after debug print

Otherwise debug function will print (null) for alread cleared pointer

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2012>

qsvh264enc: Fix profile and level setting in codec data

The profile field in SPS is located after header byte

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2012>

nvcodec: Add new Direct3D11/CUDA mode encoder implementation

Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11
input support and re-written nvcuda{h264,h265}enc elements.
Newly writeen elements have some differences compared with old
nv{h264,h265}enc including non-backward compatible changes.

* RGBA is not a supported input format any more:
  New elements will support only YUV formats to avoid implicit conversion
  done by hardware. Ideally it should be done by upstream element
  in order to have more control on it. Moreover, RGBA support can cause
  redundant RGBA -> YUV conversion if multiple encoders are
  used for the same RGBA input
* Subsampled planar format support is dropped:
  I420 and YV12 format are not supported formats for Direct3D11.
  Although it's supported in CUDA mode, it's not a hardware friendly
  memory layout and it will waste GPU memory since UV planes
  will have large padding due to the memory layout requirement of NVENC.
* GL support is dropped: Similar to the RGBA case,
  GL support in encoder would be suboptimal if GL input is
  used by multiple encoders, because each encoder will copy GL memory
  into CUDA memory.
  Upstream cudaupload element can be used for GL <-> CUDA
  interop instead.
* No more pre-allocation of encoder input surfaces. New implementation
  will use input CUDA memory without copy (zero-copy) or
  will copy into a NVENC's input buffer struct in case of
  system memory input.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>

qt: Add touch event support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

gtk: Add touch event support

Add a handler for touch events to gtkbasewidget.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

wpevideosrc: Add touch event support

Dispatches a list of active touch events to the wpe view on each
received TOUCH_FRAME event. Touch inputs currently only move the cursor,
since wpe doesn't seem to support clicking/scrolling or zooming with
touch input.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

xvimagesink: Add touch event support

Send touch events for XI_TouchBegin, XI_TouchEnd, and XI_TouchUpdate
events, grouping events with identical timestamps into one TOUCH_FRAME.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

ximagesink: Add touch event support

Send touch events for XI_TouchBegin, XI_TouchEnd, and XI_TouchUpdate
events, grouping events with identical timestamps into one TOUCH_FRAME.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

navigationtest: Display touchscreen events, log all events

Represents touchscreen events as a trail of black squares, one for each
reported position. Additionally, this adds the `display-mouse` and
`display-touch` properties to toggle visibility of mouse/touchscreen
events, since touchscreens often emulate mouse events, as well as
logging for all received navigation events.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

navigation: Add API for touchscreen events

Add 5 new navigation event types for touchscreen events, with the same
naming and meaning as in libinput - touch-down, touch-motion, touch-up,
touch-frame and touch-cancel - as well as constructors and parse
functions for them.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

all: Use new navigation interface and API

Use and implement the new navigation interface in all relevant sink elements,
and use API functions everywhere instead of directy accessing the event structure.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

navigation: Add coordinate helper functions

Add a function to get x/y coordinates from suitable navigation events,
and one to create a copy with given coordinate values.

For e.g. translating event coordinates, this avoids having to either
switch on the event type to select the right parse function, or
having to rely on implementation details of the underlying event
structure.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

navigation: Improve interface to avoid exposing implementation details

This deprecates the current send_event interface, and the wrapper
functions based on it, replacing it with a send_event_simple interface and
wrapper function. Together with the new event constructors, this avoids
implementations having to directly access the underlying structure.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>

msdkenc: add macro definitions to avoid the gst-inspect error

Since the strings are empty for GST_MSDK_CAPS_MAKE_WITH_DMABUF_FEATURE
and GST_MSDK_CAPS_MAKE_WITH_VA_FEATURE, when excuting
gst-inspect-1.0.exe msdkh265enc, there will be convert static caps error
because of the extra semicolon between two empty strings. Now macro
definitions are added to avoid this issue.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2004>

wavparse: handle query in any parse state

In order to create the stream_id, we need to
pass the query to the default query handler.

If the parse state is different from GST_WAVPARSE_DATA
the query should be passed to the default query
handler.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1987>

flvmux: Clean up aggregate's control flow

This unifies exits to go through a single out label. It mostly
simplifies how EOS is handled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1035>