Kevin Wolf [Wed, 13 May 2015 09:07:07 +0000 (11:07 +0200)]
qcow2: Improve error message
Eric says that "any" sounds better than "either", and my non-native
feeling says the same, so let's change it.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 8 Dec 2014 16:37:28 +0000 (17:37 +0100)]
qemu-io: Add command 'reopen'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 13 May 2015 08:39:13 +0000 (10:39 +0200)]
qemu-io: Remove duplicate 'open' error message
qemu_opts_parse_noisily() already prints an error message with the exact
reason why the parsing failed. No need to add another less specific one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 10 Apr 2015 15:50:50 +0000 (17:50 +0200)]
block: Allow specifying driver-specific options to reopen
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 7 Sep 2015 15:12:56 +0000 (17:12 +0200)]
qcow2: Rename BDRVQcowState to BDRVQcow2State
BDRVQcowState is already used by qcow1, and gdb is always confused which
one to use. Rename the qcow2 one so they can be distinguished.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Max Reitz [Wed, 26 Aug 2015 17:47:52 +0000 (19:47 +0200)]
block: Drop bdrv_find_whitelisted_format()
It is unused by now, so we can drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:51 +0000 (19:47 +0200)]
block: Drop drv parameter from bdrv_fill_options()
Now that this parameter is effectively unused, we can drop it and change
the function accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:50 +0000 (19:47 +0200)]
block: Drop drv parameter from bdrv_open_inherit()
Now that this parameter is effectively unused, we can drop it and just
pass NULL to bdrv_fill_options().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:49 +0000 (19:47 +0200)]
block: Drop drv parameter from bdrv_open()
Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 26 Aug 2015 17:47:48 +0000 (19:47 +0200)]
block: Always pass NULL as drv for bdrv_open()
Change all callers of bdrv_open() to pass the driver name in the options
QDict instead of passing its BlockDriver pointer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Mon, 14 Sep 2015 09:46:38 +0000 (10:46 +0100)]
Merge remote-tracking branch 'remotes/aurel/tags/pull-sh4-next-
20150913' into staging
sh4-next:
- TCG optimizations
- fix initramfs endianness issue
# gpg: Signature made Sun 13 Sep 2015 22:16:12 BST using RSA key ID
1DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg: aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg: aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77 196D BA9C 7806 1DDD 8C9B
* remotes/aurel/tags/pull-sh4-next-
20150913:
sh4: Fix initramfs initialization for endiannes-mismatched targets
target-sh4: improve shad instruction
target-sh4: improve shld instruction
target-sh4: improve cmp/str instruction
target-sh4: use deposit in swap.b instruction
target-sh4: add flags markups for FP helpers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guenter Roeck [Wed, 12 Aug 2015 14:20:36 +0000 (07:20 -0700)]
sh4: Fix initramfs initialization for endiannes-mismatched targets
If host and target endianness does not match, loding an initramfs does not work.
Fix by writing boot parameters with appropriate endianness conversion.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 20:39:03 +0000 (22:39 +0200)]
target-sh4: improve shad instruction
The SH4 shad instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.
Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 20:37:18 +0000 (22:37 +0200)]
target-sh4: improve shld instruction
The SH4 shld instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.
Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 16:50:09 +0000 (18:50 +0200)]
target-sh4: improve cmp/str instruction
Instead of testing bytes one by one, we can use the following trick
from https://graphics.stanford.edu/~seander/bithacks.html:
haszero(v) = (v - 0x01010101) & ~v & 0x80808080
The subexpression v - 0x01010101, evaluates to a high bit set in any
byte whenever the corresponding byte in v is zero or greater than 0x80.
The sub-expression ~v & 0x80808080 evaluates to high bits set in bytes
where the byte of v doesn't have its high bit set (so the byte was less
than 0x80). Finally, by ANDing these two sub-expressions the result is
the high bits set where the bytes in v were zero, since the high bits
set due to a value greater than 0x80 in the first sub-expression are
masked off by the second.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 5 Jul 2015 15:05:08 +0000 (17:05 +0200)]
target-sh4: use deposit in swap.b instruction
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 17 Jun 2015 10:53:13 +0000 (12:53 +0200)]
target-sh4: add flags markups for FP helpers
Most floating point helpers can trigger an exception, but don't change
the globals. Mark these helpers as TCG_CALL_NO_WG.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Fri, 11 Sep 2015 17:01:56 +0000 (18:01 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20150911' into staging
queued tcg related patches
# gpg: Signature made Fri 11 Sep 2015 16:17:00 BST using RSA key ID
4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
* remotes/rth/tags/pull-tcg-
20150911:
cpu-exec: introduce loop exit with restore function
softmmu: remove now unused functions
softmmu: add helper function to pass through retaddr
tlb: Add "ifetch" argument to cpu_mmu_index()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 14 Aug 2015 17:46:32 +0000 (18:46 +0100)]
scripts/qemu-gdb: Add brief comment describing usage
Add a brief comment describing how to use the debug support
from GDB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 14 Aug 2015 17:46:31 +0000 (18:46 +0100)]
scripts/qemu-gdb: Silently pass through SIGUSR1
SIGUSR1 is QEMU's IPI signal, and it gets sent a lot, so is
best silently passed through to the guest without stopping.
Make qemu-gdb.py do this bit of configuration for the user.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-4-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 14 Aug 2015 17:46:30 +0000 (18:46 +0100)]
scripts/qemu-gdb: Split CoroutineCommand into its own file
Split the implementation of CoroutineCommand into its own file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 14 Aug 2015 17:46:29 +0000 (18:46 +0100)]
scripts/qemu-gdb: Split MtreeCommand into its own module
As we add more commands to our Python gdb debugging support, it's
going to get unwieldy to have everything in a single file. Split
the implementation of the 'mtree' command from qemu-gdb.py into
its own module.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1439574392-4403-2-git-send-email-peter.maydell@linaro.org
Pavel Dovgalyuk [Fri, 10 Jul 2015 09:57:02 +0000 (12:57 +0300)]
cpu-exec: introduce loop exit with restore function
This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <
20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pavel Dovgalyuk [Fri, 10 Jul 2015 09:56:56 +0000 (12:56 +0300)]
softmmu: remove now unused functions
Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <
20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pavel Dovgalyuk [Fri, 10 Jul 2015 09:56:50 +0000 (12:56 +0300)]
softmmu: add helper function to pass through retaddr
This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <
20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Benjamin Herrenschmidt [Mon, 17 Aug 2015 07:34:10 +0000 (17:34 +1000)]
tlb: Add "ifetch" argument to cpu_mmu_index()
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <
1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Maydell [Fri, 11 Sep 2015 11:07:29 +0000 (12:07 +0100)]
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-09-11' into staging
trivial patches for 2015-09-11
# gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID
A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2015-09-11: (26 commits)
virtio-vga: enable for i386
hw/arm/spitz: Remove meaningless blank Property
hw/gpio/zaurus: Remove meaningless blank Property
hw/virtio/virtio-pci: Remove meaningless blank Property
hw/s390x/s390-virtio-bus: Remove meaningless blank Property
typofixes - v4
qapi-schema: remove legacy<> from doc
disas/microblaze: Remove unused code
help: dd missing newline
Target-ppc: Remove unnecessary variable
baum: Fix build with debugging enabled
linux-user: Fix warnings caused by missing 'static' attribute
opts: produce valid command line in qemu_opts_print
docs: fix a qga/qapi-schema.json comment
trivial: remove trailing newline from error_report
maint: avoid useless "if (foo) free(foo)" pattern
maint: avoid useless "if (foo) free(foo)" pattern
maint: remove unused include for strings.h
maint: remove unused include for signal.h
maint: remove unused include for dirent.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Mon, 13 Jul 2015 11:58:46 +0000 (13:58 +0200)]
virtio-vga: enable for i386
This one just syncs x86_64 and i386.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:20 +0000 (10:25 +0800)]
hw/arm/spitz: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:19 +0000 (10:25 +0800)]
hw/gpio/zaurus: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:18 +0000 (10:25 +0800)]
hw/virtio/virtio-pci: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shannon Zhao [Tue, 12 May 2015 02:25:16 +0000 (10:25 +0800)]
hw/s390x/s390-virtio-bus: Remove meaningless blank Property
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Veres Lajos [Tue, 8 Sep 2015 21:45:14 +0000 (22:45 +0100)]
typofixes - v4
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Marc-André Lureau [Fri, 4 Sep 2015 19:41:01 +0000 (21:41 +0200)]
qapi-schema: remove legacy<> from doc
The legacy<> type is no longer used since
7ce7ffe02.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sat, 29 Aug 2015 07:44:33 +0000 (09:44 +0200)]
disas/microblaze: Remove unused code
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Laurent Vivier [Fri, 4 Sep 2015 19:30:04 +0000 (21:30 +0200)]
help: dd missing newline
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Shraddha Barke [Fri, 4 Sep 2015 19:20:28 +0000 (00:50 +0530)]
Target-ppc: Remove unnecessary variable
Compress lines and remove the variable ret.
Change made using Coccinelle script
@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;
@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;
@@
type T; identifier i;
@@
- T i;
... when != i
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Samuel Thibault [Sun, 30 Aug 2015 15:12:13 +0000 (17:12 +0200)]
baum: Fix build with debugging enabled
cur and buf are pointers, so the difference is a ptrdiff_t
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Sat, 29 Aug 2015 07:29:52 +0000 (09:29 +0200)]
linux-user: Fix warnings caused by missing 'static' attribute
Warnings from the Sparse static analysis tool:
linux-user/main.c:40:12: warning:
symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
symbol 'envlist' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kővágó, Zoltán [Tue, 7 Jul 2015 14:42:10 +0000 (16:42 +0200)]
opts: produce valid command line in qemu_opts_print
This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily. This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Marc-André Lureau [Thu, 27 Aug 2015 10:48:35 +0000 (12:48 +0200)]
docs: fix a qga/qapi-schema.json comment
For consistency with the rest of the comment blocks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
John Snow [Mon, 29 Jun 2015 20:56:26 +0000 (16:56 -0400)]
trivial: remove trailing newline from error_report
Minor cleanup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Markus Armbruster [Wed, 26 Aug 2015 12:02:53 +0000 (14:02 +0200)]
maint: avoid useless "if (foo) free(foo)" pattern
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:18 +0000 (12:17 +0100)]
maint: avoid useless "if (foo) free(foo)" pattern
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:17 +0000 (12:17 +0100)]
maint: remove unused include for strings.h
A number of files were including strings.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:16 +0000 (12:17 +0100)]
maint: remove unused include for signal.h
A number of files were including signal.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:15 +0000 (12:17 +0100)]
maint: remove unused include for dirent.h
A number of files were including dirent.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:14 +0000 (12:17 +0100)]
maint: remove unused include for assert.h
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:13 +0000 (12:17 +0100)]
maint: remove / fix many doubled words
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daniel P. Berrange [Wed, 26 Aug 2015 11:17:12 +0000 (12:17 +0100)]
maint: remove double semicolons in many files
A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.
The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Laurent Vivier [Tue, 4 Aug 2015 08:27:31 +0000 (10:27 +0200)]
i6300esb: fix timer overflow
We use muldiv64() to compute the time to wait:
timeout = muldiv64(get_ticks_per_sec(), timeout,
33000000);
but get_ticks_per_sec() is 10^9 (30 bit value) and timeout
is a 35 bit value.
Whereas muldiv64 is:
uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c)
So we loose 3 bits of timeout.
Swapping get_ticks_per_sec() and timeout fixes it.
We can also replace it by a multiplication by 30 ns,
but this changes PCI clock frequency from 33MHz to 33.333333MHz
and we need to do this on all the QEMU PCI devices (later...)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Andrey Korolyov [Fri, 31 Jul 2015 19:12:54 +0000 (22:12 +0300)]
Trivial: fix commandline help message
Fix obvious typo in printed help for qemu-nbd.
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Weil [Thu, 30 Jul 2015 05:46:43 +0000 (07:46 +0200)]
Update language files for QEMU 2.4.0
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 10 Sep 2015 17:25:52 +0000 (18:25 +0100)]
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' into staging
xen-2015-09-10
# gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID
70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits)
xen/pt: Don't slurp wholesale the PCI configuration registers
xen/pt: Check for return values for xen_host_pci_[get|set] in init
xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
xen/pt: Make xen_pt_unregister_device idempotent
xen/pt: Log xen_host_pci_get/set errors in MSI code.
xen/pt: Log xen_host_pci_get in two init functions
xen/pt: Remove XenPTReg->data field.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
xen/pt: Sync up the dev.config and data values.
xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
xen/pt/msi: Add the register value when printing logging and error messages
xen: use errno instead of rc for xc_domain_add_to_physmap
xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
xen/pt: Make xen_pt_msi_set_enable static
xen/pt: Update comments with proper function name.
xen/HVM: atomically access pointers in bufioreq handling
xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
xen, gfx passthrough: add opregion mapping
xen, gfx passthrough: register host bridge specific to passthrough
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Konrad Rzeszutek Wilk [Wed, 8 Jul 2015 19:58:41 +0000 (15:58 -0400)]
xen/pt: Don't slurp wholesale the PCI configuration registers
Instead we have the emulation registers ->init functions which
consult the host values to see what the initial value should be
and they are responsible for populating the dev.config.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Thu, 2 Jul 2015 18:33:44 +0000 (14:33 -0400)]
xen/pt: Check for return values for xen_host_pci_[get|set] in init
and if we have failures we call xen_pt_destroy introduced in
'xen/pt: Move bulk of xen_pt_unregister_device in its own routine.'
and free all of the allocated structures.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Tue, 8 Sep 2015 20:21:59 +0000 (16:21 -0400)]
xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
This way we can call it if we fail during init.
This code movement introduces no changes.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Tue, 8 Sep 2015 20:21:29 +0000 (16:21 -0400)]
xen/pt: Make xen_pt_unregister_device idempotent
To deal with xen_host_pci_[set|get]_ functions returning error values
and clearing ourselves in the init function we should make the
.exit (xen_pt_unregister_device) function be idempotent in case
the generic code starts calling .exit (or for fun does it before
calling .init!).
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Wed, 24 Jun 2015 21:27:40 +0000 (17:27 -0400)]
xen/pt: Log xen_host_pci_get/set errors in MSI code.
We seem to only use these functions when de-activating the
MSI - so just log errors.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Wed, 24 Jun 2015 21:18:26 +0000 (17:18 -0400)]
xen/pt: Log xen_host_pci_get in two init functions
To help with troubleshooting in the field.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Wed, 1 Jul 2015 19:41:33 +0000 (15:41 -0400)]
xen/pt: Remove XenPTReg->data field.
We do not want to have two entries to cache the guest configuration
registers: XenPTReg->data and dev.config. Instead we want to use
only the dev.config.
To do without much complications we rip out the ->data field
and replace it with an pointer to the dev.config. This way we
have the type-checking (uint8_t, uint16_t, etc) and as well
and pre-computed location.
Alternatively we could compute the offset in dev.config by
using the XenPTRRegInfo and XenPTRegGroup every time but
this way we have the pre-computed values.
This change also exposes some mis-use:
- In 'xen_pt_status_reg_init' we used u32 for the Capabilities Pointer
register, but said register is an an u16.
- In 'xen_pt_msgdata_reg_write' we used u32 but should have only use u16.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Mon, 29 Jun 2015 20:41:14 +0000 (16:41 -0400)]
xen/pt: Check if reg->init function sets the 'data' past the reg->size
It should never happen, but in case it does (an developer adds
a new register and the 'init_val' expands past the register
size) we want to report. The code will only write up to
reg->size so there is no runtime danger of the register spilling
across other ones - however to catch this sort of thing
we still return an error.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Mon, 29 Jun 2015 20:24:40 +0000 (16:24 -0400)]
xen/pt: Sync up the dev.config and data values.
For a passthrough device we maintain a state of emulated
registers value contained within d->config. We also consult
the host registers (and apply ro and write masks) whenever
the guest access the registers. This is done in xen_pt_pci_write_config
and xen_pt_pci_read_config.
Also in this picture we call pci_default_write_config which
updates the d->config and if the d->config[PCI_COMMAND] register
has PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) acts on those changes.
On startup the d->config[PCI_COMMAND] are the host values, not
what the guest initial values should be, which is exactly what
we do _not_ want to do for 64-bit BARs when the guest just wants
to read the size of the BAR. Huh you say?
To get the size of 64-bit memory space BARs, the guest has
to calculate ((BAR[x] & 0xFFFFFFF0) + ((BAR[x+1] & 0xFFFFFFFF) << 32))
which means it has to do two writes of ~0 to BARx and BARx+1.
prior to this patch and with XSA120-addendum patch (Linux kernel)
the PCI_COMMAND register is copied from the host it can have
PCI_COMMAND_MEMORY bit set which means that QEMU will try to
update the hypervisor's P2M with BARx+1 value to ~0 (0xffffffff)
(to sync the guest state to host) instead of just having
xen_pt_pci_write_config and xen_pt_bar_reg_write apply the
proper masks and return the size to the guest.
To thwart this, this patch syncs up the host values with the
guest values taking into account the emu_mask (bit set means
we emulate, PCI_COMMAND_MEMORY and PCI_COMMAND_IO are set).
That is we copy the host values - masking out any bits which
we will emulate. Then merge it with the initial emulation register
values. Lastly this value is then copied both in
dev.config _and_ XenPTReg->data field.
There is also reg->size accounting taken into consideration
that ends up being used in patch.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
This fixes errors such as these:
(XEN) memory_map:add: dom2 gfn=fffe0 mfn=fbce0 nr=20
(DEBUG) 189 pci dev 04:0 BAR16 wrote ~0.
(DEBUG) 200 pci dev 04:0 BAR16 read 0x0fffe0004.
(XEN) memory_map:remove: dom2 gfn=fffe0 mfn=fbce0 nr=20
(DEBUG) 204 pci dev 04:0 BAR16 wrote 0x0fffe0004.
(DEBUG) 217 pci dev 04:0 BAR16 read upper 0x000000000.
(XEN) memory_map:add: dom2 gfn=
ffffffff00000 mfn=fbce0 nr=20
(XEN) p2m.c:883:d0v0 p2m_set_entry failed! mfn=
ffffffffffffffff rc:-22
(XEN) memory_map:fail: dom2 gfn=
ffffffff00000 mfn=fbce0 nr=20 ret:-22
(XEN) memory_map:remove: dom2 gfn=
ffffffff00000 mfn=fbce0 nr=20
(XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=
ffffffff00000 type:4
(XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=
ffffffff00001 type:4
..
(XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff]
(DEBUG) 222 pci dev 04:0 BAR16 read upper 0x0ffffffff.
(XEN) memory_map:remove: dom2 gfn=
ffffffff00000 mfn=fbce0 nr=20
(XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff]
[The DEBUG is to illustate what the hvmloader was doing]
Also we swap from xen_host_pci_long to using xen_host_pci_get_[byte,word,long].
Otherwise we get:
xen_pt_config_reg_init: Offset 0x0004 mismatch! Emulated=0x0000, host=0x2300017, syncing to 0x2300014.
xen_pt_config_reg_init: Error: Offset 0x0004:0x2300014 expands past register size(2)!
which is not surprising. We read the value as an 32-bit (from host),
then operate it as a 16-bit - and the remainder is left unchanged.
We end up writing the value as 16-bit (so 0014) to dev.config
(as we use proper xen_set_host_[byte,word,long] so we don't spill
to other registers) but in XenPTReg->data it is as 32-bit (0x2300014)!
It is harmless as the read/write functions end up using an size mask
and never modify the bits past 16-bit (reg->size is 2).
This patch fixes the warnings by reading the value using the
proper size.
Note that the check for size is still left in-case the developer
sets bits past the reg->size in the ->init routines. The author
tried to fiddle with QEMU_BUILD_BUG to make this work but failed.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Mon, 29 Jun 2015 18:01:13 +0000 (14:01 -0400)]
xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
During init time we treat the dev.config area as a cache
of the host view. However during execution time we treat it
as guest view (by the generic PCI API). We need to sync Xen's
code to the generic PCI API view. This is the first step
by replacing all of the code that uses dev.config or
pci_get_[byte|word] to get host value to actually use the
xen_host_pci_get_[byte|word] functions.
Interestingly in 'xen_pt_ptr_reg_init' we also needed to swap
reg_field from uint32_t to uint8_t - since the access is only
for one byte not four bytes. We can split this as a seperate
patch however we would have to use a cast to thwart compiler
warnings in the meantime.
We also truncated 'flags' to 'flag' to make the code fit within
the 80 characters.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Peter Maydell [Thu, 10 Sep 2015 13:51:35 +0000 (14:51 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-09-10' into staging
error: On abort, report where the error was created
# gpg: Signature made Thu 10 Sep 2015 13:01:39 BST using RSA key ID
EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-09-10:
error: On abort, report where the error was created
error: Revamp interface documentation
error: error_set_errno() is unused, drop
qga/vss-win32: Document the DLL requires non-null errp
qga: Clean up unnecessarily dirty casts
error: Make error_setg() a function
error: De-duplicate code creating Error objects
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Konrad Rzeszutek Wilk [Mon, 29 Jun 2015 20:06:19 +0000 (16:06 -0400)]
xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
If XEN_PT_LOGGING_ENABLED is enabled the XEN_PT_LOG macros start
using the first argument. Which means if within the function there
is only one user of the argument ('d') and XEN_PT_LOGGING_ENABLED
is not set, we get compiler warnings. This is not the case now
but with the "xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config"
we will hit - so this sync up the function to the rest of them.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Mon, 29 Jun 2015 16:30:37 +0000 (12:30 -0400)]
xen/pt/msi: Add the register value when printing logging and error messages
We would like to know what the MSI register value is to help
in troubleshooting in the field. As such modify the logging
logic to include such details in xen_pt_msgctrl_reg_write.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Mon, 29 Jun 2015 16:51:05 +0000 (12:51 -0400)]
xen: use errno instead of rc for xc_domain_add_to_physmap
In Xen 4.6 commit
cd2f100f0f61b3f333d52d1737dd73f02daee592
"libxc: Fix do_memory_op to return negative value on errors"
made the libxc API less odd-ball: On errors, return value is
-1 and error code is in errno. On success the return value
is either 0 or an positive value.
Since we could be running with an old toolstack in which the
Exx value is in rc or the newer, we add an wrapper around
the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap)
which will always return the EXX.
Xen 4.6 did not change the libxc functions mentioned (same parameters)
so we piggyback on the fact that Xen 4.6 has a new function:
commit
504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose
new hypercall xc_reserved_device_memory_map" and check for that.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Mon, 29 Jun 2015 17:58:17 +0000 (13:58 -0400)]
xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
However the init routines assume that on errors the return
code is -1 (as the libxc API is) - while those xen_host_* routines follow
another paradigm - negative errno on return, 0 on success.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Wed, 24 Jun 2015 21:26:43 +0000 (17:26 -0400)]
xen/pt: Make xen_pt_msi_set_enable static
As we do not use it outside our code.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Wed, 24 Jun 2015 21:16:01 +0000 (17:16 -0400)]
xen/pt: Update comments with proper function name.
It has changed but the comments still refer to the old names.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Jan Beulich [Fri, 24 Jul 2015 09:38:28 +0000 (03:38 -0600)]
xen/HVM: atomically access pointers in bufioreq handling
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. The hypervisor side gets I/O req server creation
extended so we can indicate that we're using suitable atomic accesses
where needed, allowing it to atomically canonicalize both pointers when
both have gone through at least one cycle.
The Xen side counterpart (which is not a functional prereq to this
change, albeit a build one) went in already (commit
b7007bc6f9).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Konrad Rzeszutek Wilk [Fri, 13 Mar 2015 19:36:58 +0000 (15:36 -0400)]
xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
.errors - as it will most likely have the proper error value.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:50 +0000 (13:37 +0800)]
xen, gfx passthrough: add opregion mapping
The OpRegion shouldn't be mapped 1:1 because the address in the host
can't be used in the guest directly.
This patch traps read and write access to the opregion of the Intel
GPU config space (offset 0xfc).
The original patch is from Jean Guyader <jean.guyader@eu.citrix.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:49 +0000 (13:37 +0800)]
xen, gfx passthrough: register host bridge specific to passthrough
Just register that pci host bridge specific to passthrough.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:48 +0000 (13:37 +0800)]
xen, gfx passthrough: register a isa bridge
Currently we just register this isa bridge when we use IGD
passthrough in Xen side.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:47 +0000 (13:37 +0800)]
igd gfx passthrough: create a isa bridge
Currently IGD drivers always need to access PCH by 1f.0. But we
don't want to poke that directly to get ID, and although in real
world different GPU should have different PCH. But actually the
different PCH DIDs likely map to different PCH SKUs. We do the
same thing for the GPU. For PCH, the different SKUs are going to
be all the same silicon design and implementation, just different
features turn on and off with fuses. The SW interfaces should be
consistent across all SKUs in a given family (eg LPT). But just
same features may not be supported.
Most of these different PCH features probably don't matter to the
Gfx driver, but obviously any difference in display port connections
will so it should be fine with any PCH in case of passthrough.
So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell)
scenarios, 0x9cc3 for BDW(Broadwell).
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:46 +0000 (13:37 +0800)]
xen, gfx passthrough: retrieve VGA BIOS to work
Now we retrieve VGA bios like kvm stuff in qemu but we need to
fix Device Identification in case if its not matched with the
real IGD device since Seabios is always trying to compare this
ID to work out VGA BIOS.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:45 +0000 (13:37 +0800)]
xen, gfx passthrough: basic graphics passthrough support
basic gfx passthrough support:
- add a vga type for gfx passthrough
- register/unregister legacy VGA I/O ports and MMIOs for passthrough GFX
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:44 +0000 (13:37 +0800)]
hw/pci-assign: split pci-assign.c
We will try to reuse assign_dev_load_option_rom in xen side, and
especially its a good beginning to unify pci assign codes both on
kvm and xen in the future.
[Fix build for Windows]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tiejun Chen [Wed, 15 Jul 2015 05:37:43 +0000 (13:37 +0800)]
piix: create host bridge to passthrough
Implement a pci host bridge specific to passthrough. Actually
this just inherits the standard one. And we also just expose
a minimal real host bridge pci configuration subset.
[Replace pread with lseek and read to fix Windows build]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Markus Armbruster [Fri, 19 Jun 2015 17:21:59 +0000 (19:21 +0200)]
error: On abort, report where the error was created
This is particularly useful when we abort in error_propagate(),
because there the stack backtrace doesn't lead to where the error was
created. Looks like this:
Unexpected error in parse_block_error_action() at .../qemu/blockdev.c:322:
qemu-system-x86_64: -drive if=none,werror=foo: 'foo' invalid write error action
Aborted (core dumped)
Note: to get this example output, I monkey-patched drive_new() to pass
&error_abort to blockdev_init().
To keep the error handling boiler plate from growing even more, all
error_setFOO() become macros expanding into error_setFOO_internal()
with additional __FILE__, __LINE__, __func__ arguments. Not exactly
pretty, but it works.
The macro trickery breaks down when you take the address of an
error_setFOO(). Fortunately, we do that in just one place: qemu-ga's
Windows VSS provider and requester DLL wants to call
error_setg_win32() through a function pointer "to avoid linking glib
to the DLL". Use error_setg_win32_internal() there. The use of the
function pointer is already wrapped in a macro, so the churn isn't
bad.
Code size increases by some 35KiB for me (0.7%). Tolerable. Could be
less if we passed relative rather than absolute source file names to
the compiler, or forwent reporting __func__.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Markus Armbruster [Fri, 19 Jun 2015 16:29:24 +0000 (18:29 +0200)]
error: Revamp interface documentation
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Fri, 19 Jun 2015 20:16:14 +0000 (22:16 +0200)]
error: error_set_errno() is unused, drop
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Sat, 20 Jun 2015 07:33:56 +0000 (09:33 +0200)]
qga/vss-win32: Document the DLL requires non-null errp
requester.cpp uses this pattern to receive an error and pass it on to
the caller (err_is_set() macro peeled off for clarity):
... code that may set errset->errp ...
if (errset->errp && *errset->errp) {
... handle error ...
}
This breaks when errset->errp is null. As far as I can tell, it
currently isn't, so this is merely fragile, not actually broken.
The robust way to do this is to receive the error in a local variable,
then propagate it up, like this:
Error *err = NULL;
... code that may set err ...
if (err)
... handle error ...
error_propagate(errset->errp, err);
}
See also commit 5e54769, 0f230bf, a903f40.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Fri, 19 Jun 2015 18:44:54 +0000 (20:44 +0200)]
qga: Clean up unnecessarily dirty casts
qga_vss_fsfreeze() casts error_set_win32() from
void (*)(Error **, int, ErrorClass, const char *, ...)
to
void (*)(void **, int, int, const char *, ...)
The result is later called. Since the two types are not compatible,
the call is undefined behavior. It works in practice anyway.
However, there's no real need for trickery here. Clean it up as
follows:
* Declare struct Error, and fix the first parameter.
* Switch to error_setg_win32(). This gets rid of the troublesome
ErrorClass parameter. Requires converting error_setg_win32() from
macro to function, but that's trivially easy, because this is the
only user of error_set_win32().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Fri, 19 Jun 2015 13:36:16 +0000 (15:36 +0200)]
error: Make error_setg() a function
Saves a tiny amount of code at every call site.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Fri, 19 Jun 2015 11:59:47 +0000 (13:59 +0200)]
error: De-duplicate code creating Error objects
Duplicated when commit 680d16d added error_set_errno(), and again when
commit 20840d4 added error_set_win32().
Make the original copy in error_set() reusable by factoring out
error_setv(), then rewrite error_set_errno() and error_set_win32() on
top of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Maydell [Thu, 10 Sep 2015 09:24:30 +0000 (10:24 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,acpi fixes, cleanups
Fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 10 Sep 2015 10:16:18 BST using RSA key ID
D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
hw/pci: fix pci_update_mappings() trace events
pc: memhotplug: keep reserved-memory-end broken on 2.4 and earlier machines
pc: memhotplug: fix incorrectly set reserved-memory-end
acpi: Remove unused definition.
virtio: avoid leading underscores for helpers
pc: Remove redundant arguments from xen_hvm_init()
pci: Fix pci_device_iommu_address_space() bus propagation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Laszlo Ersek [Tue, 1 Sep 2015 21:33:23 +0000 (23:33 +0200)]
hw/pci: fix pci_update_mappings() trace events
The current trace prototypes and (matching) trace calls lead to
"unorthodox" PCI BDF notation in at least the stderr trace backend. For
example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1,
function 0) are traced like this (PID and timestamps removed):
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000
pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20
The slot and function values are in reverse order.
Stick with the conventional BDF notation.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Don Koch <dkoch@verizon.com>
Cc: qemu-trivial@nongnu.org
Fixes:
7828d75045
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 7 Sep 2015 11:55:32 +0000 (13:55 +0200)]
pc: memhotplug: keep reserved-memory-end broken on 2.4 and earlier machines
it will prevent guests on old machines from seeing
inconsistent memory mapping in firmware/ACPI views.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Mon, 7 Sep 2015 11:55:31 +0000 (13:55 +0200)]
pc: memhotplug: fix incorrectly set reserved-memory-end
reserved-memory-end tells firmware address from which
it could start treating memory as PCI address space
and map PCI BARs after it to avoid collisions with
RAM.
Currently it is incorrectly pointing to address where
hotplugged memory range starts which could redirect
hotplugged RAM accesses to PCI BARs when firmware
maps them over RAM or viceverse.
Fix this by pointing reserved-memory-end to the end
of memory hotplug area.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Richard W.M. Jones [Wed, 2 Sep 2015 19:03:38 +0000 (20:03 +0100)]
acpi: Remove unused definition.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cornelia Huck [Mon, 17 Aug 2015 09:48:29 +0000 (11:48 +0200)]
virtio: avoid leading underscores for helpers
Commit
ef546f1275f6563e8934dd5e338d29d9f9909ca6 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eduardo Habkost [Mon, 17 Aug 2015 18:42:29 +0000 (11:42 -0700)]
pc: Remove redundant arguments from xen_hvm_init()
Remove arguments that can be found in PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Benjamin Herrenschmidt [Sat, 4 Jul 2015 23:19:15 +0000 (09:19 +1000)]
pci: Fix pci_device_iommu_address_space() bus propagation
he current code walks up the bus tree for an iommu, however it passes
to the iommu_fn() callback the bus/devfn of the immediate child of
the level where the callback was found, rather than the original
bus/devfn where the search started from.
This prevents iommu's like POWER8 (and in fact also Q35) to properly
provide an address space for a subset of devices that aren't immediate
children of the iommu.
PCIe carries the originator bdfn acccross to the iommu on all DMA
transactions, so we must be able to properly identify devices at all
levels.
This changes the function pci_device_iommu_address_space() to pass
the original pointers to the iommu_fn() callback instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Tue, 8 Sep 2015 17:02:36 +0000 (18:02 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20150908' into staging
target-arm queue:
* Implement priority handling properly via GICC_APR
* Enable TZ extensions on the GIC if we're using them
* Minor preparatory patches for EL3 support
* cadence_gem: Correct Marvell PHY SPCFC reset value
* Support AHCI in ZynqMP
# gpg: Signature made Tue 08 Sep 2015 17:48:33 BST using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-
20150908:
xlnx-zynqmp: Connect the sysbus AHCI to ZynqMP
xlnx-zynqmp.c: Convert some of the error_propagate() calls to error_abort
ahci.c: Don't assume AHCIState's parent is AHCIPCIState
ahci: Separate the AHCI state structure into the header
cadence_gem: Correct Marvell PHY SPCFC reset value
target-arm: Add AArch64 access to PAR_EL1
target-arm: Correct opc1 for AT_S12Exx
target-arm: Log the target EL when taking exceptions
target-arm: Fix default_exception_el() function for the case when EL3 is not supported
hw/arm/virt: Enable TZ extensions on the GIC if we are using them
hw/arm/virt: Default to not providing TrustZone support
hw/cpu/{a15mpcore, a9mpcore}: enable TrustZone in GIC if it is enabled in CPUs
hw/intc/arm_gic_common: Configure IRQs as NS if doing direct NS kernel boot
hw/arm: new interface for devices which need to behave differently for kernel boot
qom: Add recursive version of object_child_for_each
hw/intc/arm_gic: Actually set the active bits for active interrupts
hw/intc/arm_gic: Drop running_irq and last_active arrays
hw/intc/arm_gic: Fix handling of GICC_APR<n>, GICC_NSAPR<n> registers
hw/intc/arm_gic: Running priority is group priority, not full priority
armv7m_nvic: Implement ICSR without using internal GIC state
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Tue, 8 Sep 2015 16:38:45 +0000 (17:38 +0100)]
xlnx-zynqmp: Connect the sysbus AHCI to ZynqMP
Connect the Sysbus AHCI device to ZynqMP.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
[PMM: removed unnecessary brackets in error_propagate call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Tue, 8 Sep 2015 16:38:45 +0000 (17:38 +0100)]
xlnx-zynqmp.c: Convert some of the error_propagate() calls to error_abort
Convert all of the non-realize error_propagate() calls into error_abort
calls as they shouldn't be user visible failure cases.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Tue, 8 Sep 2015 16:38:45 +0000 (17:38 +0100)]
ahci.c: Don't assume AHCIState's parent is AHCIPCIState
The AHCIState struct can either have AHCIPCIState or SysbusAHCIState
as a parent. The ahci_irq_lower() and ahci_irq_raise() functions
assume that it is always AHCIPCIState, which is not always the
case, which causes a seg fault. Verify what the container of AHCIState
is before setting the PCIDevice struct.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>