usb: mtu3: add memory barrier before set GPD's HWO

commit a7aae769ca626819a7f9f078ebdc69a8a1b00c81 upstream.

There is a seldom issue that the controller access invalid address
and trigger devapc or emimpu violation. That is due to memory access
is out of order and cause gpd data is not correct.
Add mb() to prohibit compiler or cpu from reordering to make sure GPD
is fully written before setting its HWO.

Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format")
Cc: stable@vger.kernel.org
Reported-by: Eddie Hung <eddie.hung@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.

commit b1e0887379422975f237d43d8839b751a6bcf154 upstream.

ffs_data_clear is indirectly called from both ffs_fs_kill_sb and
ffs_ep0_release, so it ends up being called twice when userland closes ep0
and then unmounts f_fs.
If userland provided an eventfd along with function's USB descriptors, it
ends up calling eventfd_ctx_put as many times, causing a refcount
underflow.
NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls.

Also, set epfiles to NULL right after de-allocating it, for readability.

For completeness, ffs_data_clear actually ends up being called thrice, the
last call being before the whole ffs structure gets freed, so when this
specific sequence happens there is a second underflow happening (but not
being reported):

/sys/kernel/debug/tracing# modprobe usb_f_fs
/sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter
/sys/kernel/debug/tracing# echo function > current_tracer
/sys/kernel/debug/tracing# echo 1 > tracing_on
(setup gadget, run and kill function userland process, teardown gadget)
/sys/kernel/debug/tracing# echo 0 > tracing_on
/sys/kernel/debug/tracing# cat trace
 smartcard-openp-436     [000] .....  1946.208786: ffs_data_clear <-ffs_data_closed
 smartcard-openp-431     [000] .....  1946.279147: ffs_data_clear <-ffs_data_closed
 smartcard-openp-431     [000] .n...  1946.905512: ffs_data_clear <-ffs_data_put

Warning output corresponding to above trace:
[ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c
[ 1946.293094] refcount_t: underflow; use-after-free.
[ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E)
[ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G         C OE     5.15.0-1-rpi #1  Debian 5.15.3-1
[ 1946.417950] Hardware name: BCM2835
[ 1946.425442] Backtrace:
[ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24)
[ 1946.448226]  r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c
[ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30)
[ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154)
[ 1946.482067]  r5:c04a948c r4:c0a71dc8
[ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4)
[ 1946.506758]  r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04
[ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c)
[ 1946.535309]  r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0
[ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74)
[ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs])
[ 1946.582664]  r5:c3b84c00 r4:c2695b00
[ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs])
[ 1946.609608]  r5:bf54d014 r4:c2695b00
[ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs])
[ 1946.636217]  r7:c0dfcb84 r6:c3a12260 r5:bf54d014 r4:c229f000
[ 1946.646273] [<bf547d74>] (ffs_fs_kill_sb [usb_f_fs]) from [<c0326d50>] (deactivate_locked_super+0x54/0x9c)
[ 1946.664893]  r5:bf54d014 r4:c229f000
[ 1946.672921] [<c0326cfc>] (deactivate_locked_super) from [<c0326df8>] (deactivate_super+0x60/0x64)
[ 1946.690722]  r5:c2a09000 r4:c229f000
[ 1946.698706] [<c0326d98>] (deactivate_super) from [<c0349a28>] (cleanup_mnt+0xe4/0x14c)
[ 1946.715553]  r5:c2a09000 r4:00000000
[ 1946.723528] [<c0349944>] (cleanup_mnt) from [<c0349b08>] (__cleanup_mnt+0x1c/0x20)
[ 1946.739922]  r7:c0dfcb84 r6:c3a12260 r5:c3a126fc r4:00000000
[ 1946.750088] [<c0349aec>] (__cleanup_mnt) from [<c0143d10>] (task_work_run+0x84/0xb8)
[ 1946.766602] [<c0143c8c>] (task_work_run) from [<c010bdc8>] (do_work_pending+0x470/0x56c)
[ 1946.783540]  r7:5ac3c35a r6:c0d0424c r5:c200bfb0 r4:c200a000
[ 1946.793614] [<c010b958>] (do_work_pending) from [<c01000c0>] (slow_work_pending+0xc/0x20)
[ 1946.810553] Exception stack(0xc200bfb0 to 0xc200bff8)
[ 1946.820129] bfa0:                                     00000000 00000000 000000aa b5e21430
[ 1946.837104] bfc0: bef867a0 00000001 bef86840 00000034 bef86838 bef86790 bef86794 bef867a0
[ 1946.854125] bfe0: 00000000 bef86798 b67b7a1c b6d626a4 60000010 b5a23760
[ 1946.865335]  r10:00000000 r9:c200a000 r8:c0100224 r7:00000034 r6:bef86840 r5:00000001
[ 1946.881914]  r4:bef867a0
[ 1946.888793] ---[ end trace 7387f2a9725b28d0 ]---

Fixes: 5e33f6fdf735 ("usb: gadget: ffs: add eventfd notification about ffs events")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Link: https://lore.kernel.org/r/f79eeea29f3f98de6782a064ec0f7351ad2f598f.1639793920.git.plr.vincent@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.

commit e4844092581ceec22489b66c42edc88bc6079783 upstream.

The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like
other Fresco controllers, but should not have the BROKEN_MSI quirks set.

BROKEN_MSI quirk causes issues in detecting usb drives connected to docks
with this FL1100 controller.
The BROKEN_MSI flag was apparently accidentally set together with the
TRUST_TX_LENGTH quirk

Original patch went to stable so this should go there as well.

Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller")
Cc: stable@vger.kernel.org
cc: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add support for IP discovery gc_info table v2

commit 5e713c6afa34c0fd6f113bf7bb1c2847172d7b20 upstream.

Used on gfx9 based systems. Fixes incorrect CU counts reported
in the kernel log.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1833
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled

commit b7865173cf6ae59942e2c69326a06e1c1df5ecf6 upstream.

Play a video on the raven (or PCO, raven2) platform, and then do the S3
test. When resume, the following error will be reported:

amdgpu 0000:02:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring
vcn_dec test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block
<vcn_v1_0> failed -110
amdgpu 0000:02:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110

[why]
When playing the video: The power state flag of the vcn block is set to
POWER_STATE_ON.

When doing suspend: There is no change to the power state flag of the
vcn block, it is still POWER_STATE_ON.

When doing resume: Need to open the power gate of the vcn block and set
the power state flag of the VCN block to POWER_STATE_ON.
But at this time, the power state flag of the vcn block is already
POWER_STATE_ON. The power status flag check in the "8f2cdef drm/amd/pm:
avoid duplicate powergate/ungate setting" patch will return the
amdgpu_dpm_set_powergating_by_smu function directly.
As a result, the gate of the power was not opened, causing the
subsequent ring test to fail.

[how]
In the suspend function of the vcn block, explicitly change the power
state flag of the vcn block to POWER_STATE_OFF.

BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: fix linux/nfc.h userspace compilation errors

commit 7175f02c4e5f5a9430113ab9ca0fd0ce98b28a51 upstream.

Replace sa_family_t with __kernel_sa_family_t to fix the following
linux/nfc.h userspace compilation errors:

/usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t'
  sa_family_t sa_family;
/usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t'
  sa_family_t sa_family;

Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: uapi: use kernel size_t to fix user-space builds

commit 79b69a83705e621b258ac6d8ae6d3bfdb4b930aa upstream.

Fix user-space builds if it includes /usr/include/linux/nfc.h before
some of other headers:

  /usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’
    281 |         size_t service_name_len;
        |         ^~~~~~

Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: validate user data in compat ioctl

[ Upstream commit bb436283e25aaf1533ce061605d23a9564447bdf ]

Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings

Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes: 7d5cb45655f2 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsl/fman: Fix missing put_device() call in fman_port_probe

[ Upstream commit bf2b09fedc17248b315f80fb249087b7d28a69a6 ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.

Fixes: 18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ncsi: check for error return from call to nla_put_u32

[ Upstream commit 92a34ab169f9eefe29cd420ce96b0a0a2a1da853 ]

As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.

Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: udpgso_bench_tx: fix dst ip argument

[ Upstream commit 9c1952aeaa98b3cfc49e2a79cb2c7d6a674213e9 ]

udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.

This will cause test case "multiple GRO socks" failed in udpgro.sh.

Setup sockaddr after parsing all arguments.

Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix wrong features assignment in case of error

[ Upstream commit 992d8a4e38f0527f24e273ce3a9cd6dea1a6a436 ]

In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.

However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.

For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.

To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.

Fixes: 75b81ce719b7 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: Initialize the 'lif->dbid_inuse' bitmap

[ Upstream commit 140c7bc7d1195750342ea0e6ab76179499ae7cd7 ]

When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.

Use bitmap_zalloc() to make sure that it is cleared before being used.

Fixes: 6461b446f2a0 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Fix TX timestamp support for non-MSI-X platforms

[ Upstream commit f85846bbf43de38fb2c89fe7d2a085608c4eb25a ]

Time synchronization was not properly enabled on non-MSI-X platforms.

Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix kernel panic caused by race of smc_sock

[ Upstream commit 349d43127dac00c15231e8ffbcaabd70f7b0e544 ]

A crash occurs when smc_cdc_tx_handler() tries to access smc_sock
but smc_release() has already freed it.

[ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88
[ 4570.696048] #PF: supervisor write access in kernel mode
[ 4570.696728] #PF: error_code(0x0002) - not-present page
[ 4570.697401] PGD 0 P4D 0
[ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111
[ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0
[ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30
<...>
[ 4570.711446] Call Trace:
[ 4570.711746]  <IRQ>
[ 4570.711992]  smc_cdc_tx_handler+0x41/0xc0
[ 4570.712470]  smc_wr_tx_tasklet_fn+0x213/0x560
[ 4570.712981]  ? smc_cdc_tx_dismisser+0x10/0x10
[ 4570.713489]  tasklet_action_common.isra.17+0x66/0x140
[ 4570.714083]  __do_softirq+0x123/0x2f4
[ 4570.714521]  irq_exit_rcu+0xc4/0xf0
[ 4570.714934]  common_interrupt+0xba/0xe0

Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.

smc_cdc_tx_handler()           |smc_release()
if (!conn)                     |
                               |
                               |smc_cdc_tx_dismiss_slots()
                               |      smc_cdc_tx_dismisser()
                               |
                               |sock_put(&smc->sk) <- last sock_put,
                               |                      smc_sock freed
bh_lock_sock(&smc->sk) (panic) |

To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.

Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.

For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.

Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Reported-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: don't send CDC/LLC message if link not ready

[ Upstream commit 90cee52f2e780345d3629e278291aea5ac74f40f ]

We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.

smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.

Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.

Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: improved fix wait on already cleared link

[ Upstream commit 95f7f3e7dc6bd2e735cb5de11734ea2222b1e05a ]

Commit 8f3d65c16679 ("net/smc: fix wait on already cleared link")
introduced link refcounting to avoid waits on already cleared links.
This patch extents and improves the refcounting to cover all
remaining possible cases for this kind of error situation.

Fixes: 15e1b99aadfb ("net/smc: no WR buffer wait for terminating link group")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: st21nfca: Fix memory leak in device probe and remove

[ Upstream commit 1b9dadba502234eea7244879b8d5d126bfaf9f0c ]

'phy->pending_skb' is alloced when device probe, but forgot to free
in the error handling path and remove path, this cause memory leak
as follows:

unreferenced object 0xffff88800bc06800 (size 512):
  comm "8", pid 11775, jiffies 4295159829 (age 9.032s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450
    [<00000000c93382b3>] kmalloc_reserve+0x37/0xd0
    [<000000005fea522c>] __alloc_skb+0x124/0x380
    [<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2

Fix it by freeing 'pending_skb' in error and remove.

Fixes: 68957303f44a ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lantiq_xrx200: fix statistics of received bytes

[ Upstream commit 5be60a945329d82f06fc755a43eeefbfc5f77d72 ]

Received frames have FCS truncated. There is no need
to subtract FCS length from the statistics.

Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ag71xx: Fix a potential double free in error handling paths

[ Upstream commit 1cd5384c88af5b59bf9f3b6c1a151bc14b88c2cd ]

'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there
is no need to call free_netdev() explicitly or there will be a double
free().

Simplify all error handling paths accordingly.

Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: pegasus: Do not drop long Ethernet frames

[ Upstream commit ca506fca461b260ab32952b610c3d4aadc6c11fd ]

The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames
that are longer than 1518 octets, for example, Ethernet frames that
contain 802.1Q VLAN tags.

The frames are sent to the pegasus driver via USB but the driver
discards them because they have the Long_pkt field set to 1 in the
received status report. The function read_bulk_callback of the pegasus
driver treats such received "packets" (in the terminology of the
hardware) as errors but the field simply does just indicate that the
Ethernet frame (MAC destination to FCS) is longer than 1518 octets.

It seems that in the 1990s there was a distinction between
"giant" (> 1518) and "runt" (< 64) frames and the hardware includes
flags to indicate this distinction. It seems that the purpose of the
distinction "giant" frames was to not allow infinitely long frames due
to transmission errors and to allow hardware to have an upper limit of
the frame size. However, the hardware already has such limit with its
2048 octet receive buffer and, therefore, Long_pkt is merely a
convention and should not be treated as a receive error.

Actually, the hardware is even able to receive Ethernet frames with 2048
octets which exceeds the claimed limit frame size limit of the driver of
1536 octets (PEGASUS_MTU).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Matthias-Christian Ott <ott@mirix.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix using of uninitialized completions

[ Upstream commit 6d7373dabfd3933ee30c40fc8c09d2a788f6ece1 ]

In smc_wr_tx_send_wait() the completion on index specified by
pend->idx is initialized and after smc_wr_tx_send() was called the wait
for completion starts. pend->idx is used to get the correct index for
the wait, but the pend structure could already be cleared in
smc_wr_tx_process_cqe().
Introduce pnd_idx to hold and use a local copy of the correct index.

Fixes: 09c61d24f96d ("net/smc: wait for departure of an IB message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: use call_rcu to free endpoint

[ Upstream commit 5ec7d18d1813a5bead0b495045606c93873aecbb ]

This patch is to delay the endpoint free by calling call_rcu() to fix
another use-after-free issue in sctp_sock_dump():

  BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20
  Call Trace:
    __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218
    lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844
    __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
    _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
    spin_lock_bh include/linux/spinlock.h:334 [inline]
    __lock_sock+0x203/0x350 net/core/sock.c:2253
    lock_sock_nested+0xfe/0x120 net/core/sock.c:2774
    lock_sock include/net/sock.h:1492 [inline]
    sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324
    sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091
    sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527
    __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049
    inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065
    netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244
    __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352
    netlink_dump_start include/linux/netlink.h:216 [inline]
    inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170
    __sock_diag_cmd net/core/sock_diag.c:232 [inline]
    sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263
    netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477
    sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274

This issue occurs when asoc is peeled off and the old sk is freed after
getting it by asoc->base.sk and before calling lock_sock(sk).

To prevent the sk free, as a holder of the sk, ep should be alive when
calling lock_sock(). This patch uses call_rcu() and moves sock_put and
ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to
hold the ep under rcu_read_lock in sctp_transport_traverse_process().

If sctp_endpoint_hold() returns true, it means this ep is still alive
and we have held it and can continue to dump it; If it returns false,
it means this ep is dead and can be freed after rcu_read_unlock, and
we should skip it.

In sctp_sock_dump(), after locking the sk, if this ep is different from
tsp->asoc->ep, it means during this dumping, this asoc was peeled off
before calling lock_sock(), and the sk should be skipped; If this ep is
the same with tsp->asoc->ep, it means no peeloff happens on this asoc,
and due to lock_sock, no peeloff will happen either until release_sock.

Note that delaying endpoint free won't delay the port release, as the
port release happens in sctp_endpoint_destroy() before calling call_rcu().
Also, freeing endpoint by call_rcu() makes it safe to access the sk by
asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv().

Thanks Jones to bring this issue up.

v1->v2:
  - improve the changelog.
  - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.

Reported-by: syzbot+9276d76e83e3bcde6c99@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: Calculate udpgso segment count without header adjustment

[ Upstream commit 5471d5226c3b39b3d2f7011c082d5715795bd65c ]

The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.

With this change the regression test started failing. Update
the tests to match this new behavior.

Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.

Fixes: 158390e45612 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp: using datalen to cap ipv6 udp max gso segments

[ Upstream commit 736ef37fd9a44f5966e25319d08ff7ea99ac79e8 ]

The max number of UDP gso segments is intended to cap to
UDP_MAX_SEGMENTS, this is checked in udp_send_skb().

skb->len contains network and transport header len here, we should use
only data len instead.

This is the ipv6 counterpart to the below referenced commit,
which missed the ipv6 change

Fixes: 158390e45612 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix ICOSQ recovery flow for XSK

[ Upstream commit 19c4aba2d4e23997061fb11aed8a3e41334bfa14 ]

There are two ICOSQs per channel: one is needed for RX, and the other
for async operations (XSK TX, kTLS offload). Currently, the recovery
flow for both is the same, and async ICOSQ is mistakenly treated like
the regular ICOSQ.

This patch prevents running the regular ICOSQ recovery on async ICOSQ.
The purpose of async ICOSQ is to handle XSK wakeup requests and post
kTLS offload RX parameters, it has nothing to do with RQ and XSKRQ UMRs,
so the regular recovery sequence is not applicable here.

Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Wrap the tx reporter dump callback to extract the sq

[ Upstream commit 918fc3855a6507a200e9cf22c20be852c0982687 ]

Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct
mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually
of type struct mlx5e_tx_timeout_ctx *.

 mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected
 mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000
 BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae)
 kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
 CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
 RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
 [mlx5_core]
 Call Trace:
 mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core]
 devlink_health_do_dump.part.91+0x71/0xd0
 devlink_health_report+0x157/0x1b0
 mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core]
 ? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0
 [mlx5_core]
 ? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core]
 ? update_load_avg+0x19b/0x550
 ? set_next_entity+0x72/0x80
 ? pick_next_task_fair+0x227/0x340
 ? finish_task_switch+0xa2/0x280
   mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core]
   process_one_work+0x1de/0x3a0
   worker_thread+0x2d/0x3c0
 ? process_one_work+0x3a0/0x3a0
   kthread+0x115/0x130
 ? kthread_park+0x90/0x90
   ret_from_fork+0x1f/0x30
 --[ end trace 51ccabea504edaff ]---
 RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
 PKRU: 55555554
 Kernel panic - not syncing: Fatal exception
 Kernel Offset: disabled
 end Kernel panic - not syncing: Fatal exception

To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which
extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the
TX-timeout-recovery flow dump callback.

Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: DR, Fix NULL vs IS_ERR checking in dr_domain_init_resources

[ Upstream commit 6b8b42585886c59a008015083282aae434349094 ]

The mlx5_get_uars_page() function  returns error pointers.
Using IS_ERR() to check the return value to fix this.

Fixes: 4ec9e7b02697 ("net/mlx5: DR, Expose steering domain functionality")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()

[ Upstream commit 9020be114a47bf7ff33e179b3bb0016b91a098e6 ]

The "mybuf" string comes from the user, so we need to ensure that it is NUL
terminated.

Link: https://lore.kernel.org/r/20211214070527.GA27934@kili
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: initialize proto variable in selinux_ip_postroute_compat()

commit 732bc2ff080c447f8524f40c970c481f5da6eed3 upstream.

Clang static analysis reports this warning

hooks.c:5765:6: warning: 4th function call argument is an uninitialized
                value
        if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto))
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

selinux_parse_skb() can return ok without setting proto.  The later call
to selinux_xfrm_postroute_last() does an early check of proto and can
return ok if the garbage proto value matches.  So initialize proto.

Cc: stable@vger.kernel.org
Fixes: eef9b41622f2 ("selinux: cleanup selinux_xfrm_sock_rcv_skb() and selinux_xfrm_postroute_last()")
Signed-off-by: Tom Rix <trix@redhat.com>
[PM: typo/spelling and checkpatch.pl description fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

recordmcount.pl: fix typo in s390 mcount regex

commit 4eb1782eaa9fa1c224ad1fa0d13a9f09c3ab2d80 upstream.

Commit 85bf17b28f97 ("recordmcount.pl: look for jgnop instruction as well
as bcrl on s390") added a new alternative mnemonic for the existing brcl
instruction. This is required for the combination old gcc version (pre 9.0)
and binutils since version 2.37.
However at the same time this commit introduced a typo, replacing brcl with
bcrl. As a result no mcount locations are detected anymore with old gcc
versions (pre 9.0) and binutils before version 2.37.
Fix this by using the correct mnemonic again.

Reported-by: Miroslav Benes <mbenes@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 85bf17b28f97 ("recordmcount.pl: look for jgnop instruction as well as bcrl on s390")
Link: https://lore.kernel.org/r/alpine.LSU.2.21.2112230949520.19849@pobox.suse.cz
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memblock: fix memblock_phys_alloc() section mismatch error

[ Upstream commit d7f55471db2719629f773c2d6b5742a69595bfd3 ]

Fix modpost Section mismatch error in memblock_phys_alloc()

[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x1dcc): Section mismatch in reference
from the function memblock_phys_alloc() to the function .init.text:memblock_phys_alloc_range()
The function memblock_phys_alloc() references
the function __init memblock_phys_alloc_range().
This is often because memblock_phys_alloc lacks a __init
annotation or the annotation of memblock_phys_alloc_range is wrong.

ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
[...]

memblock_phys_alloc() is a one-line wrapper, make it __always_inline to
avoid these section mismatches.

Reported-by: k2ci <kernel-bot@kylinos.cn>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
[rppt: slightly massaged changelog ]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20211217020754.2874872-1-liu.yun@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: apple-gmux: use resource_size() with res

[ Upstream commit eb66fb03a727cde0ab9b1a3858de55c26f3007da ]

This should be (res->end - res->start + 1) here actually,
use resource_size() derectly.

Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Clear stale IIR value on instruction access rights trap

[ Upstream commit 484730e5862f6b872dca13840bed40fd7c60fa26 ]

When a trap 7 (Instruction access rights) occurs, this means the CPU
couldn't execute an instruction due to missing execute permissions on
the memory region.  In this case it seems the CPU didn't even fetched
the instruction from memory and thus did not store it in the cr19 (IIR)
register before calling the trap handler. So, the trap handler will find
some random old stale value in cr19.

This patch simply overwrites the stale IIR value with a constant magic
"bad food" value (0xbaadf00d), in the hope people don't start to try to
understand the various random IIR values in trap 7 dumps.

Noticed-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tomoyo: use hwight16() in tomoyo_domain_quota_is_ok()

[ Upstream commit f702e1107601230eec707739038a89018ea3468d ]

hwight16() is much faster. While we are at it, no need to include
"perm =" part into data_race() macro, for perm is a local variable
that cannot be accessed by other threads.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tomoyo: Check exceeded quota early in tomoyo_domain_quota_is_ok().

[ Upstream commit 04e57a2d952bbd34bc45744e72be3eecdc344294 ]

If tomoyo is used in a testing/fuzzing environment in learning mode,
for lots of domains the quota will be exceeded and stay exceeded
for prolonged periods of time. In such cases it's pointless (and slow)
to walk the whole acl list again and again just to rediscover that
the quota is exceeded. We already have the TOMOYO_DIF_QUOTA_WARNED flag
that notes the overflow condition. Check it early to avoid the slowdown.

[penguin-kernel]
This patch causes a user visible change that the learning mode will not be
automatically resumed after the quota is increased. To resume the learning
mode, administrator will need to explicitly clear TOMOYO_DIF_QUOTA_WARNED
flag after increasing the quota. But I think that this change is generally
preferable, for administrator likely wants to optimize the acl list for
that domain before increasing the quota, or that domain likely hits the
quota again. Therefore, don't try to care to clear TOMOYO_DIF_QUOTA_WARNED
flag automatically when the quota for that domain changed.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - enable deferred probe quirk for ASUS UM325UA

[ Upstream commit 44ee250aeeabb28b52a10397ac17ffb8bfe94839 ]

The ASUS UM325UA suffers from the same issue as the ASUS UX425UA, which
is a very similar laptop. The i8042 device is not usable immediately
after boot and fails to initialize, requiring a deferred retry.

Enable the deferred probe quirk for the UM325UA.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256
Signed-off-by: Samuel Čavoj <samuel@cavoj.net>
Link: https://lore.kernel.org/r/20211204015615.232948-1-samuel@cavoj.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - add deferred probe support

[ Upstream commit 9222ba68c3f4065f6364b99cc641b6b019ef2d42 ]

We've got a bug report about the non-working keyboard on ASUS ZenBook
UX425UA.  It seems that the PS/2 device isn't ready immediately at
boot but takes some seconds to get ready.  Until now, the only
workaround is to defer the probe, but it's available only when the
driver is a module.  However, many distros, including openSUSE as in
the original report, build the PS/2 input drivers into kernel, hence
it won't work easily.

This patch adds the support for the deferred probe for i8042 stuff as
a workaround of the problem above.  When the deferred probe mode is
enabled and the device couldn't be probed, it'll be repeated with the
standard deferred probe mechanism.

The deferred probe mode is enabled either via the new option
i8042.probe_defer or via the quirk table entry.  As of this patch, the
quirk table contains only ASUS ZenBook UX425UA.

The deferred probe part is based on Fabio's initial work.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Samuel Čavoj <samuel@cavoj.net>
Link: https://lore.kernel.org/r/20211117063757.11380-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.89

Link: https://lore.kernel.org/r/20211227151324.694661623@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phonet/pep: refuse to enable an unbound pipe

commit 75a2f31520095600f650597c0ac41f48b5ba0068 upstream.

This ioctl() implicitly assumed that the socket was already bound to
a valid local socket name, i.e. Phonet object. If the socket was not
bound, two separate problems would occur:

1) We'd send an pipe enablement request with an invalid source object.
2) Later socket calls could BUG on the socket unexpectedly being
   connected yet not bound to a valid object.

Reported-by: syzbot+2dc91e7fc3dea88b1e8a@syzkaller.appspotmail.com
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hamradio: improve the incomplete fix to avoid NPD

commit b2f37aead1b82a770c48b5d583f35ec22aabb61e upstream.

The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after
unregister_netdev") reorder the kfree operations and unregister_netdev
operation to prevent UAF.

This commit improves the previous one by also deferring the nullify of
the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs.
Partial of the stack trace is shown below.

BUG: kernel NULL pointer dereference, address: 0000000000000538
RIP: 0010:ax_xmit+0x1f9/0x400
...
Call Trace:
 dev_hard_start_xmit+0xec/0x320
 sch_direct_xmit+0xea/0x240
 __qdisc_run+0x166/0x5c0
 __dev_queue_xmit+0x2c7/0xaf0
 ax25_std_establish_data_link+0x59/0x60
 ax25_connect+0x3a0/0x500
 ? security_socket_connect+0x2b/0x40
 __sys_connect+0x96/0xc0
 ? __hrtimer_init+0xc0/0xc0
 ? common_nsleep+0x2e/0x50
 ? switch_fpu_return+0x139/0x1a0
 __x64_sys_connect+0x11/0x20
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The crash point is shown as below

static void ax_encaps(...) {
  ...
  set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL!
  ...
}

By placing the nullify action after the unregister_netdev, the ax->tty
pointer won't be assigned as NULL net_device framework layer is well
synchronized.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hamradio: defer ax25 kfree after unregister_netdev

commit 3e0588c291d6ce225f2b891753ca41d45ba42469 upstream.

There is a possible race condition (use-after-free) like below

 (USE)                       |  (FREE)
ax25_sendmsg                 |
 ax25_queue_xmit             |
  dev_queue_xmit             |
   __dev_queue_xmit          |
    __dev_xmit_skb           |
     sch_direct_xmit         | ...
      xmit_one               |
       netdev_start_xmit     | tty_ldisc_kill
        __netdev_start_xmit  |  mkiss_close
         ax_xmit             |   kfree
          ax_encaps          |
                             |

Even though there are two synchronization primitives before the kfree:
1. wait_for_completion(&ax->dead). This can prevent the race with
routines from mkiss_ioctl. However, it cannot stop the routine coming
from upper layer, i.e., the ax25_sendmsg.

2. netif_stop_queue(ax->dev). It seems that this line of code aims to
halt the transmit queue but it fails to stop the routine that already
being xmit.

This patch reorder the kfree after the unregister_netdev to avoid the
possible UAF as the unregister_netdev() is well synchronized and won't
return if there is a running routine.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ax25: NPD bug when detaching AX25 device

commit 1ade48d0c27d5da1ccf4b583d8c5fc8b534a3ac8 upstream.

The existing cleanup routine implementation is not well synchronized
with the syscall routine. When a device is detaching, below race could
occur.

static int ax25_sendmsg(...) {
  ...
  lock_sock()
  ax25 = sk_to_ax25(sk);
  if (ax25->ax25_dev == NULL) // CHECK
  ...
  ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE
  ...
}

static void ax25_kill_by_device(...) {
  ...
  if (s->ax25_dev == ax25_dev) {
    s->ax25_dev = NULL;
    ...
}

Other syscall functions like ax25_getsockopt, ax25_getname,
ax25_info_show also suffer from similar races. To fix them, this patch
introduce lock_sock() into ax25_kill_by_device in order to guarantee
that the nullify action in cleanup routine cannot proceed when another
socket request is pending.

Signed-off-by: Hanjie Wu <nagi@zju.edu.cn>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (lm90) Do not report 'busy' status bit as alarm

commit cdc5287acad9ede121924a9c9313544b80d15842 upstream.

Bit 7 of the status register indicates that the chip is busy
doing a conversion. It does not indicate an alarm status.
Stop reporting it as alarm status bit.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681

commit da7dc0568491104c7acb632e9d41ddce9aaabbb1 upstream.

Tests with a real chip and a closer look into the datasheet reveals
that the local and remote critical alarm status bits are swapped for
MAX6680/MAX6681.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: mediatek: fix global-out-of-bounds issue

commit 2d5446da5acecf9c67db1c9d55ae2c3e5de01f8d upstream.

When eint virtual eint number is greater than gpio number,
it maybe produce 'desc[eint_n]' size globle-out-of-bounds issue.

Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com>
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20211110071900.4490-2-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5682: fix the wrong jack type detected

commit 8deb34a90f06374fd26f722c2a79e15160f66be7 upstream.

Some powers were changed during the jack insert detection
and clk's enable/disable in CCF.
If in parallel, the influence has a chance to detect
the wrong jack type, so add a lock.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211214105033.471-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Fix setting of high sample rates

commit 80d5be1a057e05f01d66e986cfd34d71845e5190 upstream.

Although the codec advertises support for 176.4 and 192 ksps, without
this fix setting those sample rates fails with EINVAL at hw_params time.

Signed-off-by: Martin Povišer <povik@protonmail.com>
Link: https://lore.kernel.org/r/20211206224529.74656-1-povik@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - add id->model mapping for the "9111" model

commit 81e818869be522bc8fa6f7df1b92d7e76537926c upstream.

Add d->model mapping for the "9111" model, this fixes uses using
a wrong config_len of 240 bytes while the "9111" model uses
only 186 bytes of config.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211206164747.197309-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312

commit 4ebfee2bbc1a9c343dd50565ba5ae249fac32267 upstream.

The eKTH3900/eKTH5312 series do not support the firmware update rules of
Remark ID. Exclude these two series from checking it when updating the
firmware in touch controllers.

Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com>
Link: https://lore.kernel.org/r/1639619603-20616-1-git-send-email-johnny.chuang.emc@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: mempolicy: fix THP allocations escaping mempolicy restrictions

commit 338635340669d5b317c7e8dcf4fff4a0f3651d87 upstream.

alloc_pages_vma() may try to allocate THP page on the local NUMA node
first:

page = __alloc_pages_node(hpage_node,
gfp | __GFP_THISNODE | __GFP_NORETRY, order);

And if the allocation fails it retries allowing remote memory:

if (!page && (gfp & __GFP_DIRECT_RECLAIM))
     page = __alloc_pages_node(hpage_node,
gfp, order);

However, this retry allocation completely ignores memory policy nodemask
allowing allocation to escape restrictions.

The first appearance of this bug seems to be the commit ac5b2c18911f
("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings").

The bug disappeared later in the commit 89c83fb539f9 ("mm, thp:
consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") and
reappeared again in slightly different form in the commit 76e654cc91bb
("mm, page_alloc: allow hugepage fallback to remote nodes when
madvised")

Fix this by passing correct nodemask to the __alloc_pages() call.

The demonstration/reproducer of the problem:

    $ mount -oremount,size=4G,huge=always /dev/shm/
    $ echo always > /sys/kernel/mm/transparent_hugepage/defrag
    $ cat mbind_thp.c
    #include <unistd.h>
    #include <sys/mman.h>
    #include <sys/stat.h>
    #include <fcntl.h>
    #include <assert.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <numaif.h>

    #define SIZE 2ULL << 30
    int main(int argc, char **argv)
    {
        int fd;
        unsigned long long i;
        char *addr;
        pid_t pid;
        char buf[100];
        unsigned long nodemask = 1;

        fd = open("/dev/shm/test", O_RDWR|O_CREAT);
        assert(fd > 0);
        assert(ftruncate(fd, SIZE) == 0);

        addr = mmap(NULL, SIZE, PROT_READ|PROT_WRITE,
                           MAP_SHARED, fd, 0);

        assert(mbind(addr, SIZE, MPOL_BIND, &nodemask, 2, MPOL_MF_STRICT|MPOL_MF_MOVE)==0);
        for (i = 0; i < SIZE; i+=4096) {
          addr[i] = 1;
        }
        pid = getpid();
        snprintf(buf, sizeof(buf), "grep shm /proc/%d/numa_maps", pid);
        system(buf);
        sleep(10000);

        return 0;
    }
    $ gcc mbind_thp.c -o mbind_thp -lnuma
    $ numactl -H
    available: 2 nodes (0-1)
    node 0 cpus: 0 2
    node 0 size: 1918 MB
    node 0 free: 1595 MB
    node 1 cpus: 1 3
    node 1 size: 2014 MB
    node 1 free: 1731 MB
    node distances:
    node   0   1
      0:  10  20
      1:  20  10
    $ rm -f /dev/shm/test; taskset -c 0 ./mbind_thp
    7fd970a00000 bind:0 file=/dev/shm/test dirty=524288 active=0 N0=396800 N1=127488 kernelpagesize_kB=4

Link: https://lkml.kernel.org/r/20211208165343.22349-1-arbn@yandex-team.com
Fixes: ac5b2c18911f ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state

commit 0ff29701ffad9a5d5a24344d8b09f3af7b96ffda upstream.

Update the documentation for kvm-intel's emulate_invalid_guest_state to
rectify the description of KVM's default behavior, and to document that
the behavior and thus parameter only applies to L1.

Fixes: a27685c33acc ("KVM: VMX: Emulate invalid guest state by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-4-seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_ether: fix race in setting MAC address in setup phase

commit 890d5b40908bfd1a79be018d2d297cf9df60f4ee upstream.

When listening for notifications through netlink of a new interface being
registered, sporadically, it is possible for the MAC to be read as zero.
The zero MAC address lasts a short period of time and then switches to a
valid random MAC address.

This causes problems for netd in Android, which assumes that the interface
is malfunctioning and will not use it.

In the good case we get this log:
InterfaceController::getCfg() ifName usb0
 hwAddr 92:a8:f0:73:79:5b ipv4Addr 0.0.0.0 flags 0x1002

In the error case we get these logs:
InterfaceController::getCfg() ifName usb0
 hwAddr 00:00:00:00:00:00 ipv4Addr 0.0.0.0 flags 0x1002

netd : interfaceGetCfg("usb0")
netd : interfaceSetCfg() -> ServiceSpecificException
 (99, "[Cannot assign requested address] : ioctl() failed")

The reason for the issue is the order in which the interface is setup,
it is first registered through register_netdev() and after the MAC
address is set.

Fixed by first setting the MAC address of the net_device and after that
calling register_netdev().

Fixes: bcd4a1c40bee885e ("usb: gadget: u_ether: construct with default values and add setters/getters")
Cc: stable@vger.kernel.org
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20211204214912.17627-1-posteuca@mutex.one
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix up non-directory creation in SGID directories

commit fd84bfdddd169c219c3a637889a8b87f70a072c2 upstream.

Ceph always inherits the SGID bit if it is set on the parent inode,
while the generic inode_init_owner does not do this in a few cases where
it can create a possible security problem (cf. [1]).

Update ceph to strip the SGID bit just as inode_init_owner would.

This bug was detected by the mapped mount testsuite in [3]. The
testsuite tests all core VFS functionality and semantics with and
without mapped mounts. That is to say it functions as a generic VFS
testsuite in addition to a mapped mount testsuite. While working on
mapped mount support for ceph, SIGD inheritance was the only failing
test for ceph after the port.

The same bug was detected by the mapped mount testsuite in XFS in
January 2021 (cf. [2]).

[1]: commit 0fa3ecd87848 ("Fix up non-directory creation in SGID directories")
[2]: commit 01ea173e103e ("xfs: fix up non-directory creation in SGID directories")
[3]: https://git.kernel.org/fs/xfs/xfstests-dev.git

Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()

commit 5598b24efaf4892741c798b425d543e4bed357a1 upstream.

As Wenqing Liu reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=215235

- Overview
page fault in f2fs_setxattr() when mount and operate on corrupted image

- Reproduce
tested on kernel 5.16-rc3, 5.15.X under root

1. unzip tmp7.zip
2. ./single.sh f2fs 7

Sometimes need to run the script several times

- Kernel dump
loop0: detected capacity change from 0 to 131072
F2FS-fs (loop0): Found nat_bits in checkpoint
F2FS-fs (loop0): Mounted with checkpoint version = 7548c2ee
BUG: unable to handle page fault for address: ffffe47bc7123f48
RIP: 0010:kfree+0x66/0x320
Call Trace:
 __f2fs_setxattr+0x2aa/0xc00 [f2fs]
 f2fs_setxattr+0xfa/0x480 [f2fs]
 __f2fs_set_acl+0x19b/0x330 [f2fs]
 __vfs_removexattr+0x52/0x70
 __vfs_removexattr_locked+0xb1/0x140
 vfs_removexattr+0x56/0x100
 removexattr+0x57/0x80
 path_removexattr+0xa3/0xc0
 __x64_sys_removexattr+0x17/0x20
 do_syscall_64+0x37/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The root cause is in __f2fs_setxattr(), we missed to do sanity check on
last xattr entry, result in out-of-bound memory access during updating
inconsistent xattr data of target inode.

After the fix, it can detect such xattr inconsistency as below:

F2FS-fs (loop11): inode (7) has invalid last xattr entry, entry_size: 60676
F2FS-fs (loop11): inode (8) has corrupted xattr
F2FS-fs (loop11): inode (8) has corrupted xattr
F2FS-fs (loop11): inode (8) has invalid last xattr entry, entry_size: 47736

Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tee: optee: Fix incorrect page free bug

commit 18549bf4b21c739a9def39f27dcac53e27286ab5 upstream.

Pointer to the allocated pages (struct page *page) has already
progressed towards the end of allocation. It is incorrect to perform
__free_pages(page, order) using this pointer as we would free any
arbitrary pages. Fix this by stop modifying the page pointer.

Fixes: ec185dd3ab25 ("optee: Fix memory leak when failing to register shm pages")
Cc: stable@vger.kernel.org
Reported-by: Patrik Lantz <patrik.lantz@axis.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()

commit 2a57d83c78f889bf3f54eede908d0643c40d5418 upstream.

Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE.  The BUG() is triggered when retrying
get_any_page().  This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.

    page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
    ------------[ cut here ]------------
    kernel BUG at include/linux/mm.h:737!
    invalid opcode: 0000 [#1] PREEMPT SMP
    CPU: 5 PID: 2135 Comm: sshd Tainted: G    B             5.16.0-rc6-dirty #373
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
    RIP: release_pages+0x53f/0x840
    Call Trace:
      free_pages_and_swap_cache+0x64/0x80
      tlb_flush_mmu+0x6f/0x220
      unmap_page_range+0xe6c/0x12c0
      unmap_single_vma+0x90/0x170
      unmap_vmas+0xc4/0x180
      exit_mmap+0xde/0x3a0
      mmput+0xa3/0x250
      do_exit+0x564/0x1470
      do_group_exit+0x3b/0x100
      __do_sys_exit_group+0x13/0x20
      __x64_sys_exit_group+0x16/0x20
      do_syscall_64+0x34/0x80
      entry_SYSCALL_64_after_hwframe+0x44/0xae
    Modules linked in:
    ---[ end trace e99579b570fe0649 ]---
    RIP: 0010:release_pages+0x53f/0x840

Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com
Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix locking in ieee80211_start_ap error path

commit 87a270625a89fc841f1a7e21aae6176543d8385c upstream.

We need to hold the local->mtx to release the channel context,
as even encoded by the lockdep_assert_held() there. Fix it.

Cc: stable@vger.kernel.org
Fixes: 295b02c4be74 ("mac80211: Add FILS discovery support")
Reported-and-tested-by: syzbot+11c342e5e30e9539cabd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211220090836.cee3d59a1915.I36bba9b79dc2ff4d57c3c7aa30dff9a003fe8c5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling

commit 8536a5ef886005bc443c2da9b842d69fd3d7647f upstream.

The Thumb2 version of the FP exception handling entry code treats the
register holding the CP number (R8) differently, resulting in the iWMMXT
CP number check to be incorrect.

Fix this by unifying the ARM and Thumb2 code paths, and switch the
order of the additions of the TI_USED_CP offset and the shifted CP
index.

Cc: <stable@vger.kernel.org>
Fixes: b86040a59feb ("Thumb-2: Implementation of the unified start-up and exceptions code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mmci: stm32: clear DLYB_CR after sending tuning command

commit ff31ee0a0f471776f67be5e5275c18d17736fc6b upstream.

During test campaign, and especially after several unbind/bind sequences,
it has been seen that the SD-card on SDMMC1 thread could freeze.
The freeze always appear on a CMD23 following a CMD19.
Checking SDMMC internal registers shows that the tuning command (CMD19)
has failed.
The freeze is then due to the delay block involved in the tuning sequence.
To correct this, clear the delay block register DLYB_CR register after
the tuning commands.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 1103f807a3b9 ("mmc: mmci_sdmmc: Add execute tuning with delay block")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215141727.4901-4-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Disable card detect during shutdown

commit 66c915d09b942fb3b2b0cb2f56562180901fba17 upstream.

It's seems prone to problems by allowing card detect and its corresponding
mmc_rescan() work to run, during platform shutdown. For example, we may end
up turning off the power while initializing a card, which potentially could
damage it.

To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host
class device and then turn of the card detect from there.

Reported-by: Al Cooper <alcooperx@gmail.com>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211203141555.105351-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commands

commit f89b548ca66be7500dcd92ee8e61590f7d08ac91 upstream.

The vendor driver implements special handling for multi-block
SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data
attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC
register for these commands. In all other cases this bit is cleared.
Here we omit SD_IO_RW_DIRECT since that command never has any data
attached to it.

This fixes SDIO wifi using the brcmfmac driver which reported the
following error without this change on a Netxeon S82 board using a
Meson8 (S802) SoC:
  brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip
                          BCM43362/1
  brcmf_sdiod_ramrw: membytes transfer failed
  brcmf_sdio_download_code_file: error -110 on writing 219557 membytes
                                 at 0x00000000
  brcmf_sdio_download_firmware: dongle image file download failed

And with this change:
  brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip
                          BCM43362/1
  brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may
                            have limited channels available
  brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00
                         version 5.90.195.89.6 FWID 01-b30a427d

Fixes: e4bf1b0970ef96 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211219153442.463863-2-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-tegra: Fix switch to HS400ES mode

commit 4fc7261dbab139d3c64c3b618262504e16cfe7ee upstream.

When CMD13 is sent after switching to HS400ES mode, the bus
is operating at either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR.
To meet Tegra SDHCI requirement at HS400ES mode, force SDHCI
interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host
controller CAR clock and the interface clock are rate matched.

Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: dfc9700cef77 ("mmc: tegra: Implement HS400 enhanced strobe")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211214113653.4631-1-pshete@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: dln2: Fix interrupts when replugging the device

commit 9a5875f14b0e3a13ae314883f1bb72b7f31fac07 upstream.

When replugging the device the following message shows up:

gpio gpiochip2: (dln2): detected irqchip that is shared with multiple gpiochips: please fix the driver.

This also has the effect that interrupts won't work.
The same problem would also show up if multiple devices where plugged in.

Fix this by allocating the irq_chip data structure per instance like other
drivers do.

I don't know when this problem appeared, but it is present in 5.10.

Cc: <stable@vger.kernel.org> # 5.10+
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines

commit b67210cc217f9ca1c576909454d846970c13dfd4 upstream.

Consider the GPIO controller offset (from "gpio-ranges") to compute the
maximum GPIO line number.
This fixes an issue where gpio-ranges uses a non-null offset.
  e.g.: gpio-ranges = <&pinctrl 6 86 10>
        In that case the last valid GPIO line is not 9 but 15 (6 + 10 - 1)

Cc: stable@vger.kernel.org
Fixes: 67e2996f72c7 ("pinctrl: stm32: fix the reported number of GPIO lines per bank")
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20211215095808.621716-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU

commit fdba608f15e2427419997b0898750a49a735afcb upstream.

Drop a check that guards triggering a posted interrupt on the currently
running vCPU, and more importantly guards waking the target vCPU if
triggering a posted interrupt fails because the vCPU isn't IN_GUEST_MODE.
If a vIRQ is delivered from asynchronous context, the target vCPU can be
the currently running vCPU and can also be blocking, in which case
skipping kvm_vcpu_wake_up() is effectively dropping what is supposed to
be a wake event for the vCPU.

The "do nothing" logic when "vcpu == running_vcpu" mostly works only
because the majority of calls to ->deliver_posted_interrupt(), especially
when using posted interrupts, come from synchronous KVM context.  But if
a device is exposed to the guest using vfio-pci passthrough, the VFIO IRQ
and vCPU are bound to the same pCPU, and the IRQ is _not_ configured to
use posted interrupts, wake events from the device will be delivered to
KVM from IRQ context, e.g.

  vfio_msihandler()
  |
  |-> eventfd_signal()
      |
      |-> ...
          |
          |->  irqfd_wakeup()
               |
               |->kvm_arch_set_irq_inatomic()
                  |
                  |-> kvm_irq_delivery_to_apic_fast()
                      |
                      |-> kvm_apic_set_irq()

This also aligns the non-nested and nested usage of triggering posted
interrupts, and will allow for additional cleanups.

Fixes: 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath")
Cc: stable@vger.kernel.org
Reported-by: Longpeng (Mike) <longpeng2@huawei.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: intel_pmc_core: fix memleak on registration failure

commit 26a8b09437804fabfb1db080d676b96c0de68e7c upstream.

In case device registration fails during module initialisation, the
platform device structure needs to be freed using platform_device_put()
to properly free all resources (e.g. the device name).

Fixes: 938835aa903a ("platform/x86: intel_pmc_core: do not create a static struct device")
Cc: stable@vger.kernel.org # 5.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211222105023.6205-1-johan@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pkey: Fix undefined behaviour with PKRU_WD_BIT

commit 57690554abe135fee81d6ac33cc94d75a7e224bb upstream.

Both __pkru_allows_write() and arch_set_user_pkey_access() shift
PKRU_WD_BIT (a signed constant) by up to 30 bits, hitting the
sign bit.

Use unsigned constants instead.

Clearly pkey 15 has not been used in combination with UBSAN yet.

Noticed by code inspection only.  I can't actually provoke the
compiler into generating incorrect logic as far as this shift is
concerned.

[
  dhansen: add stable@ tag, plus minor changelog massaging,

           For anyone doing backports, these #defines were in
   arch/x86/include/asm/pgtable.h before 784a46618f6.
]

Fixes: 33a709b25a76 ("mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211216000856.4480-1-andrew.cooper3@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tee: handle lookup of shm with reference count 0

commit dfd0743f1d9ea76931510ed150334d571fbab49d upstream.

Since the tee subsystem does not keep a strong reference to its idle
shared memory buffers, it races with other threads that try to destroy a
shared memory through a close of its dma-buf fd or by unmapping the
memory.

In tee_shm_get_from_id() when a lookup in teedev->idr has been
successful, it is possible that the tee_shm is in the dma-buf teardown
path, but that path is blocked by the teedev mutex. Since we don't have
an API to tell if the tee_shm is in the dma-buf teardown path or not we
must find another way of detecting this condition.

Fix this by doing the reference counting directly on the tee_shm using a
new refcount_t refcount field. dma-buf is replaced by using
anon_inode_getfd() instead, this separates the life-cycle of the
underlying file from the tee_shm. tee_shm_put() is updated to hold the
mutex when decreasing the refcount to 0 and then remove the tee_shm from
teedev->idr before releasing the mutex. This means that the tee_shm can
never be found unless it has a refcount larger than 0.

Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lars Persson <larper@axis.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reported-by: Patrik Lantz <patrik.lantz@axis.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix mask used to select futex spinlock

commit d3a5a68cff47f6eead84504c3c28376b85053242 upstream.

The address bits used to select the futex spinlock need to match those used in
the LWS code in syscall.S. The mask 0x3f8 only selects 7 bits.  It should
select 8 bits.

This change fixes the glibc nptl/tst-cond24 and nptl/tst-cond25 tests.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Fixes: 53a42b6324b8 ("parisc: Switch to more fine grained lws locks")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Correct completer in lws start

commit 8f66fce0f46560b9e910787ff7ad0974441c4f9c upstream.

The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are
not clipping the LWS number when we are called from a 32-bit process (W=0).
We need to nulify the following depdi instruction when the least-significant
bit of %r30 is 1.

If the %r20 register is not clipped, a user process could perform a LWS call
that would branch to an undefined location in the kernel and potentially crash
the machine.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: fix initialization when workqueue allocation fails

commit 75d70d76cb7b927cace2cb34265d68ebb3306b13 upstream.

If the workqueue allocation fails, the driver is marked as not initialized,
and timer and panic_notifier will be left registered.

Instead of removing those when workqueue allocation fails, do the workqueue
initialization before doing it, and cleanup srcu_struct if it fails.

Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-2-cascardo@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: ssif: initialize ssif_info->client early

commit 34f35f8f14bc406efc06ee4ff73202c6fd245d15 upstream.

During probe ssif_info->client is dereferenced in error path. However,
it is set when some of the error checking has already been done. This
causes following kernel crash if an error path is taken:

[   30.645593][  T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present
[   30.657616][  T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
...
[   30.657723][  T674] pc : __dev_printk+0x28/0xa0
[   30.657732][  T674] lr : _dev_err+0x7c/0xa0
...
[   30.657772][  T674] Call trace:
[   30.657775][  T674]  __dev_printk+0x28/0xa0
[   30.657778][  T674]  _dev_err+0x7c/0xa0
[   30.657781][  T674]  ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e]
[   30.657791][  T674]  i2c_device_probe+0x37c/0x3c0
...

Initialize ssif_info->client before any error path can be taken. Clear
i2c_client data in the error path to prevent the dangling pointer from
leaking.

Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface")
Cc: stable@vger.kernel.org # 5.4.x
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Message-Id: <20211208093239.4432-1-ykaukab@suse.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: bail out if init_srcu_struct fails

commit 2b5160b12091285c5aca45980f100a9294af7b04 upstream.

In case, init_srcu_struct fails (because of memory allocation failure), we
might proceed with the driver initialization despite srcu_struct not being
entirely initialized.

Fixes: 913a89f009d9 ("ipmi: Don't initialize anything in the core until something uses it")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-1-cascardo@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: atmel_mxt_ts - fix double free in mxt_read_info_block

commit 12f247ab590a08856441efdbd351cf2cc8f60a2d upstream.

The "id_buf" buffer is stored in "data->raw_info_block" and freed by
"mxt_free_object_table" in case of error.

Return instead of jumping to avoid a double free.

Addresses-Coverity-ID: 1474582 ("Double free")
Fixes: 068bdb67ef74 ("Input: atmel_mxt_ts - fix the firmware update")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: meson: aiu: Move AIU_I2S_MISC hold setting to aiu-fifo-i2s

commit ee907afb0c39a41ee74b862882cfe12820c74b98 upstream.

The out-of-tree vendor driver uses the following approach to set the
AIU_I2S_MISC register:
1) write AIU_MEM_I2S_START_PTR and AIU_MEM_I2S_RD_PTR
2) configure AIU_I2S_MUTE_SWAP[15:0]
3) write AIU_MEM_I2S_END_PTR
4) set AIU_I2S_MISC[2] to 1 (documented as: "put I2S interface in hold
   mode")
5) set AIU_I2S_MISC[4] to 1 (depending on the driver revision it always
   stays at 1 while for older drivers this bit is unset in step 4)
6) set AIU_I2S_MISC[2] to 0
7) write AIU_MEM_I2S_MASKS
8) toggle AIU_MEM_I2S_CONTROL[0]
9) toggle AIU_MEM_I2S_BUF_CNTL[0]

Move setting the AIU_I2S_MISC[2] bit to aiu_fifo_i2s_hw_params() so it
resembles the flow in the vendor kernel more closely. While here also
configure AIU_I2S_MISC[4] (documented as: "force each audio data to
left or right according to the bit attached with the audio data")
similar to how the vendor driver does this. This fixes the infamous and
long-standing "machine gun noise" issue (a buffer underrun issue).

Fixes: 6ae9ca9ce986bf ("ASoC: meson: aiu: add i2s and spdif support")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211206210804.2512999-3-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix quirk for Clevo NJ51CU

commit edca7cc4b0accfa69dc032442fe0684e59c691b8 upstream.

The Clevo NJ51CU comes either with the ALC293 or the ALC256 codec, but uses
the 0x8686 subproduct id in both cases. The ALC256 codec needs a different
quirk for the headset microphone working and and edditional quirk for sound
working after suspend and resume.

When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020 on  the ALC256 codec. Setting the value manually makes the sound
work again. This patch does this automatically.

[ minor coding style fix by tiwai ]

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: b5acfe152abaa ("ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211215191646.844644-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add new alc285-hp-amp-init model

commit aa72394667e5cea3547e4c41ddff7ca8c632d764 upstream.

Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285
HP speaker amplifier initialization fixup to devices that are not already
known by passing "hda_model=alc285-hp-amp-init" to the
snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the
snd-hda-intel module, depending on which is being used.

Signed-off-by: Bradley Scott <bscott@teksavvy.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Amp init fixup for HP ZBook 15 G6

commit d296a74b7b59ff9116236c17edb25f26935dbf70 upstream.

HP ZBook 15 G6 (SSID 103c:860f) needs the same speaker amplifier
initialization as used on several other HP laptops using ALC285.

Signed-off-by: Bradley Scott <Bradley.Scott@zebra.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213154938.503201-1-Bradley.Scott@zebra.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: drivers: opl3: Fix incorrect use of vp->state

commit 2dee54b289fbc810669a1b2b8a0887fa1c9a14d7 upstream.

Static analysis with scan-build has found an assignment to vp2 that is
never used. It seems that the check on vp->state > 0 should be actually
on vp2->state instead. Fix this.

This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit 91e39521bbf6 ("[PATCH] ALSA patch for 2.5.4")

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211212172025.470367-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: jack: Check the return value of kstrdup()

commit c01c1db1dc632edafb0dff32d40daf4f9c1a4e19 upstream.

kstrdup() can return NULL, it is better to check the return value of it.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_094816F3522E0DC704056C789352EBBF0606@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (lm90) Drop critical attribute support for MAX6654

[ Upstream commit 16ba51b5dcd3f6dde2e51d5ccc86313119dcf889 ]

Tests with a real chip and a closer look into the datasheet show that
MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support
of the respective attributes for this chip.

Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit
attributes to solve the problem.

Cc: Josh Lehan <krellan@google.com>
Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Introduce flag indicating extended temperature support

[ Upstream commit f347e249fcf920ad6974cbd898e2ec0b366a1c34 ]

A flag indicating extended temperature support makes it easier
to add support for additional chips with this functionality.

Cc: David T. Wilson <david.wilson@nasa.gov>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Add basic support for TI TMP461

[ Upstream commit f8344f7693a25d9025a59d164450b50c6f5aa3c0 ]

TMP461 is almost identical to TMP451 and was actually detected as TMP451
with the existing lm90 driver if its I2C address is 0x4c. Add support
for it to the lm90 driver. At the same time, improve the chip detection
function to at least try to distinguish between TMP451 and TMP461.

As a side effect, this fixes commit 24333ac26d01 ("hwmon: (tmp401) use
smb word operations instead of 2 smb byte operations"). TMP461 does not
support word operations on temperature registers, which causes bad
temperature readings with the tmp401 driver. The lm90 driver does not
perform word operations on temperature registers and thus does not have
this problem.

Support is listed as basic because TMP461 supports a sensor resolution
of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125
degrees C. Also, the TMP461 supports negative temperatures with its
default temperature range, which is not the case for similar chips
supported by the lm90 and the tmp401 drivers. Those limitations will be
addressed with follow-up patches.

Fixes: 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations")
Reported-by: David T. Wilson <david.wilson@nasa.gov>
Cc: David T. Wilson <david.wilson@nasa.gov>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm90) Fix usage of CONFIG2 register in detect function

[ Upstream commit fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a ]

The detect function had a comment "Make compiler happy" when id did not
read the second configuration register. As it turns out, the code was
checking the contents of this register for manufacturer ID 0xA1 (NXP
Semiconductor/Philips), but never actually read the register. So it
wasn't surprising that the compiler complained, and it indeed had a point.
Fix the code to read the register contents for manufacturer ID 0xa1.

At the same time, the code was reading the register for manufacturer ID
0x41 (Analog Devices), but it was not using the results. In effect it was
just checking if reading the register returned an error. That doesn't
really add much if any value, so stop doing that.

Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: bcm2835: Change init order for gpio hogs

[ Upstream commit 266423e60ea1b953fcc0cd97f3dad85857e434d1 ]

...and gpio-ranges

pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio
side is registered first, but this breaks gpio hogs (which are
configured during gpiochip_add_data). Part of the hog initialisation
is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't
yet been registered this results in an -EPROBE_DEFER from which it can
never recover.

Change the initialisation sequence to register the pinctrl driver
first.

This also solves a similar problem with the gpio-ranges property, which
is required in order for released pins to be returned to inputs.

Fixes: 73345a18d464b ("pinctrl: bcm2835: Pass irqchip when adding gpiochip")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206092237.4105895-2-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: elantech - fix stack out of bound access in elantech_change_report_id()

[ Upstream commit 1d72d9f960ccf1052a0630a68c3d358791dbdaaa ]

The array param[] in elantech_change_report_id() must be at least 3
bytes, because elantech_read_reg_params() is calling ps2_command() with
PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but
it's defined in the stack as an array of 2 bytes, therefore we have a
potential stack out-of-bounds access here, also confirmed by KASAN:

[    6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0
[    6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118

[    6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110
[    6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020
[    6.512436] Workqueue: events_long serio_handle_event
[    6.512453] Call Trace:
[    6.512462]  show_stack+0x52/0x58
[    6.512474]  dump_stack+0xa1/0xd3
[    6.512487]  print_address_description.constprop.0+0x1d/0x140
[    6.512502]  ? __ps2_command+0x372/0x7e0
[    6.512516]  __kasan_report.cold+0x7d/0x112
[    6.512527]  ? _raw_write_lock_irq+0x20/0xd0
[    6.512539]  ? __ps2_command+0x372/0x7e0
[    6.512552]  kasan_report+0x3c/0x50
[    6.512564]  __asan_load1+0x6a/0x70
[    6.512575]  __ps2_command+0x372/0x7e0
[    6.512589]  ? ps2_drain+0x240/0x240
[    6.512601]  ? dev_printk_emit+0xa2/0xd3
[    6.512612]  ? dev_vprintk_emit+0xc5/0xc5
[    6.512621]  ? __kasan_check_write+0x14/0x20
[    6.512634]  ? mutex_lock+0x8f/0xe0
[    6.512643]  ? __mutex_lock_slowpath+0x20/0x20
[    6.512655]  ps2_command+0x52/0x90
[    6.512670]  elantech_ps2_command+0x4f/0xc0 [psmouse]
[    6.512734]  elantech_change_report_id+0x1e6/0x256 [psmouse]
[    6.512799]  ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse]
[    6.512863]  ? ps2_command+0x7f/0x90
[    6.512877]  elantech_query_info.cold+0x6bd/0x9ed [psmouse]
[    6.512943]  ? elantech_setup_ps2+0x460/0x460 [psmouse]
[    6.513005]  ? psmouse_reset+0x69/0xb0 [psmouse]
[    6.513064]  ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse]
[    6.513122]  ? phys_pmd_init+0x30e/0x521
[    6.513137]  elantech_init+0x8a/0x200 [psmouse]
[    6.513200]  ? elantech_init_ps2+0xf0/0xf0 [psmouse]
[    6.513249]  ? elantech_query_info+0x440/0x440 [psmouse]
[    6.513296]  ? synaptics_send_cmd+0x60/0x60 [psmouse]
[    6.513342]  ? elantech_query_info+0x440/0x440 [psmouse]
[    6.513388]  ? psmouse_try_protocol+0x11e/0x170 [psmouse]
[    6.513432]  psmouse_extensions+0x65d/0x6e0 [psmouse]
[    6.513476]  ? psmouse_try_protocol+0x170/0x170 [psmouse]
[    6.513519]  ? mutex_unlock+0x22/0x40
[    6.513526]  ? ps2_command+0x7f/0x90
[    6.513536]  ? psmouse_probe+0xa3/0xf0 [psmouse]
[    6.513580]  psmouse_switch_protocol+0x27d/0x2e0 [psmouse]
[    6.513624]  psmouse_connect+0x272/0x530 [psmouse]
[    6.513669]  serio_driver_probe+0x55/0x70
[    6.513679]  really_probe+0x190/0x720
[    6.513689]  driver_probe_device+0x160/0x1f0
[    6.513697]  device_driver_attach+0x119/0x130
[    6.513705]  ? device_driver_attach+0x130/0x130
[    6.513713]  __driver_attach+0xe7/0x1a0
[    6.513720]  ? device_driver_attach+0x130/0x130
[    6.513728]  bus_for_each_dev+0xfb/0x150
[    6.513738]  ? subsys_dev_iter_exit+0x10/0x10
[    6.513748]  ? _raw_write_unlock_bh+0x30/0x30
[    6.513757]  driver_attach+0x2d/0x40
[    6.513764]  serio_handle_event+0x199/0x3d0
[    6.513775]  process_one_work+0x471/0x740
[    6.513785]  worker_thread+0x2d2/0x790
[    6.513794]  ? process_one_work+0x740/0x740
[    6.513802]  kthread+0x1b4/0x1e0
[    6.513809]  ? set_kthread_struct+0x80/0x80
[    6.513816]  ret_from_fork+0x22/0x30

[    6.513832] The buggy address belongs to the page:
[    6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7
[    6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[    6.513860] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
[    6.513867] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[    6.513872] page dumped because: kasan: bad access detected

[    6.513879] addr ffff8881024d77c2 is located in stack of task kworker/2:1/118 at offset 34 in frame:
[    6.513887]  elantech_change_report_id+0x0/0x256 [psmouse]

[    6.513941] this frame has 1 object:
[    6.513947]  [32, 34) 'param'

[    6.513956] Memory state around the buggy address:
[    6.513962]  ffff8881024d7680: f2 f2 f2 f2 f2 00 00 f3 f3 00 00 00 00 00 00 00
[    6.513969]  ffff8881024d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.513976] >ffff8881024d7780: 00 00 00 00 f1 f1 f1 f1 02 f3 f3 f3 00 00 00 00
[    6.513982]                                            ^
[    6.513988]  ffff8881024d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    6.513995]  ffff8881024d7880: 00 f1 f1 f1 f1 03 f2 03 f2 03 f3 f3 f3 00 00 00
[    6.514000] ==================================================================

Define param[] in elantech_change_report_id() as an array of 3 bytes to
prevent the out-of-bounds access in the stack.

Fixes: e4c9062717fe ("Input: elantech - fix protocol errors for some trackpoints in SMBus mode")
BugLink: https://bugs.launchpad.net/bugs/1945590
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20211116095559.24395-1-andrea.righi@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: falcon: Check null pointer of rx_queue->page_ring

[ Upstream commit 9b8bdd1eb5890aeeab7391dddcf8bd51f7b07216 ]

Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.

Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: Check null pointer of rx_queue->page_ring

[ Upstream commit bdf1b5c3884f6a0dc91b0dbdb8c3b7d205f449e0 ]

Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.

Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20211220135603.954944-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ks8851: Check for error irq

[ Upstream commit 99d7fbb5cedf598f67e8be106d6c7b8d91366aef ]

Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.

Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: net: smc911x: Check for error irq

[ Upstream commit cb93b3e11d405f20a405a07482d01147ef4934a3 ]

Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.

Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fjes: Check for error irq

[ Upstream commit db6d6afe382de5a65d6ccf51253ab48b8e8336c3 ]

I find that platform_get_irq() will not always succeed.
It will return error irq in case of the failure.
Therefore, it might be better to check it if order to avoid the use of
error irq.

Fixes: 658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix ad_actor_system option setting to default

[ Upstream commit 1c15b05baea71a5ff98235783e3e4ad227760876 ]

When 802.3ad bond mode is configured the ad_actor_system option is set to
"00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors'
system address it was failing with EINVAL.

An all-zeroes ethernet address is valid, only multicast addresses are not
valid values.

Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module

[ Upstream commit ffb76a86f8096a8206be03b14adda6092e18e275 ]

Hi,

When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko,
the system crashed.

The log as follows:
[  141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a
[  141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0
[  141.087464] Oops: 0010 [#1] SMP NOPTI
[  141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47
[  141.088009] Workqueue: events 0xffffffffc09b3a40
[  141.088009] RIP: 0010:0xffffffffc09b3a5a
[  141.088009] Code: Bad RIP value.
[  141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246
[  141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000
[  141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
[  141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1
[  141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700
[  141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8
[  141.088009] FS:  0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000
[  141.088009] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0
[  141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  141.088009] PKRU: 55555554
[  141.088009] Call Trace:
[  141.088009]  ? process_one_work+0x195/0x390
[  141.088009]  ? worker_thread+0x30/0x390
[  141.088009]  ? process_one_work+0x390/0x390
[  141.088009]  ? kthread+0x10d/0x130
[  141.088009]  ? kthread_flush_work_fn+0x10/0x10
[  141.088009]  ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a
[  200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0
[  200.223464] Oops: 0010 [#1] SMP NOPTI
[  200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46
[  200.224008] Workqueue: events 0xffffffffc0b28a40
[  200.224008] RIP: 0010:0xffffffffc0b28a5a
[  200.224008] Code: Bad RIP value.
[  200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246
[  200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000
[  200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
[  200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5
[  200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700
[  200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8
[  200.224008] FS:  0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000
[  200.224008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0
[  200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  200.224008] PKRU: 55555554
[  200.224008] Call Trace:
[  200.224008]  ? process_one_work+0x195/0x390
[  200.224008]  ? worker_thread+0x30/0x390
[  200.224008]  ? process_one_work+0x390/0x390
[  200.224008]  ? kthread+0x10d/0x130
[  200.224008]  ? kthread_flush_work_fn+0x10/0x10
[  200.224008]  ? ret_from_fork+0x35/0x40
[  200.224008] kernel fault(0x1) notification starting on CPU 63
[  200.224008] kernel fault(0x1) notification finished on CPU 63
[  200.224008] CR2: ffffffffc0b28a5a
[  200.224008] ---[ end trace c82a412d93f57412 ]---

The reason is as follows:
T1: rmmod ipmi_si.
    ->ipmi_unregister_smi()
        -> ipmi_bmc_unregister()
            -> __ipmi_bmc_unregister()
                -> kref_put(&bmc->usecount, cleanup_bmc_device);
                    -> schedule_work(&bmc->remove_work);

T2: rmmod ipmi_msghandler.
    ipmi_msghander module uninstalled, and the module space
    will be freed.

T3: bmc->remove_work doing cleanup the bmc resource.
    -> cleanup_bmc_work()
        -> platform_device_unregister(&bmc->pdev);
            -> platform_device_del(pdev);
                -> device_del(&pdev->dev);
                    -> kobject_uevent(&dev->kobj, KOBJ_REMOVE);
                        -> kobject_uevent_env()
                            -> dev_uevent()
                                -> if (dev->type && dev->type->name)

   'dev->type'(bmc_device_type) pointer space has freed when uninstall
    ipmi_msghander module, 'dev->type->name' cause the system crash.

drivers/char/ipmi/ipmi_msghandler.c:
2820 static const struct device_type bmc_device_type = {
2821         .groups         = bmc_dev_attr_groups,
2822 };

Steps to reproduce:
Add a time delay in cleanup_bmc_work() function,
and uninstall ipmi_si and ipmi_msghandler module.

2910 static void cleanup_bmc_work(struct work_struct *work)
2911 {
2912         struct bmc_device *bmc = container_of(work, struct bmc_device,
2913                                               remove_work);
2914         int id = bmc->pdev.id; /* Unregister overwrites id */
2915
2916         msleep(3000);   <---
2917         platform_device_unregister(&bmc->pdev);
2918         ida_simple_remove(&ipmi_bmc_ida, id);
2919 }

Use 'remove_work_wq' instead of 'system_wq' to solve this issues.

Fixes: b2cfd8ab4add ("ipmi: Rework device id and guid handling to catch changing BMCs")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: fix deadlock caused by taking RTNL in RPM resume path

[ Upstream commit ac8c58f5b535d6272324e2b8b4a0454781c9147e ]

Recent net core changes caused an issue with few Intel drivers
(reportedly igb), where taking RTNL in RPM resume path results in a
deadlock. See [0] for a bug report. I don't think the core changes
are wrong, but taking RTNL in RPM resume path isn't needed.
The Intel drivers are the only ones doing this. See [1] for a
discussion on the issue. Following patch changes the RPM resume path
to not take RTNL.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=215129
[1] https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/t/

Fixes: bd869245a3dc ("net: core: try to runtime-resume detached device in __dev_open")
Fixes: f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops")
Tested-by: Martin Stolpe <martin.stolpe@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20211220201844.2714498-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: skip virtio_net_hdr_set_proto if protocol already set

[ Upstream commit 1ed1d592113959f00cc552c3b9f47ca2d157768f ]

virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr
gso_type, to avoid packets getting dropped for lack of a proto type.

Its protocol choice is a guess, especially in the case of UFO, where
the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6.

Skip this best effort if the field is already initialized. Whether
explicitly from userspace, or implicitly based on an earlier call to
dev_parse_header_protocol (which is more robust, but was introduced
after this patch).

Fixes: 9d2f67e43b73 ("net/packet: fix packet drop as of virtio gso")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: accept UFOv6 packages in virtio_net_hdr_to_skb

[ Upstream commit 7e5cced9ca84df52d874aca6b632f930b3dc5bc6 ]

Skb with skb->protocol 0 at the time of virtio_net_hdr_to_skb may have
a protocol inferred from virtio_net_hdr with virtio_net_hdr_set_proto.

Unlike TCP, UDP does not have separate types for IPv4 and IPv6. Type
VIRTIO_NET_HDR_GSO_UDP is guessed to be IPv4/UDP. As of the below
commit, UFOv6 packets are dropped due to not matching the protocol as
obtained from dev_parse_header_protocol.

Invert the test to take that L2 protocol field as starting point and
pass both UFOv4 and UFOv6 for VIRTIO_NET_HDR_GSO_UDP.

Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Link: https://lore.kernel.org/netdev/CABcq3pG9GRCYqFDBAJ48H1vpnnX=41u+MhQnayF1ztLH4WX0Fw@mail.gmail.com/
Reported-by: Andrew Melnichenko <andrew@daynix.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220144901.2784030-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: potential dereference null pointer of rx_queue->page_ring

[ Upstream commit 60ec7fcfe76892a1479afab51ff17a4281923156 ]

The return value of kcalloc() needs to be checked.
To avoid dereference of null pointer in case of the failure of alloc.
Therefore, it might be better to change the return type of
qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and
return 0 the others.
Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable()
should deal with the return value of qlcnic_sriov_alloc_vlans().

Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: marvell: prestera: fix incorrect return of port_find

[ Upstream commit 8b681bd7c301c423fbe97a6b23388a2180ff04ca ]

In case, when some ports is in list and we don't find requested - we
return last iterator state and not return NULL as expected.

Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20211216170736.8851-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-wandboard: Fix Ethernet support

[ Upstream commit 39e660687ac0c57499134765abbecf71cfd11eae ]

Currently, the imx6q-wandboard Ethernet does not transmit any
data.

This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").

Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.

Fixes: 77591e42458d ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description")
Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>