Andy Hu [Mon, 19 Dec 2022 07:12:22 +0000 (15:12 +0800)]
Merge tag 'JH7110_515_SDK_v3.5.1' from sdk into vf2-515-devel
version JH7110_515_SDK_v3.5.1 for JH7110 EVB board
andy.hu [Mon, 19 Dec 2022 04:02:54 +0000 (04:02 +0000)]
Merge branch 'CR_2868_515_evb_rgb2hdmi_shengyang.chen' into 'jh7110-5.15.y-devel'
CR_2868: riscv: linux: vout: fix rgb2hdmi display problem
See merge request sdk/linux!639
andy.hu [Mon, 19 Dec 2022 04:00:26 +0000 (04:00 +0000)]
Merge branch 'CR_2069_515_evb_cusor_keith.zhao' into 'jh7110-5.15.y-devel'
CR_2069: riscv: linux: vout: fix cusor problem
See merge request sdk/linux!647
andy.hu [Mon, 19 Dec 2022 03:55:01 +0000 (03:55 +0000)]
Merge branch 'CR_2888_515_clocktree_pll0_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2888_515_clocktree_pll0_Xingyu.Wu
See merge request sdk/linux!644
andy.hu [Mon, 19 Dec 2022 03:52:06 +0000 (03:52 +0000)]
Merge branch 'CR_2871_MMC_515_william.qiu' into 'jh7110-5.15.y-devel'
CR_2871riscv: dts: mmc:modify mmc1 config
See merge request sdk/linux!643
andy.hu [Mon, 19 Dec 2022 03:49:44 +0000 (03:49 +0000)]
Merge branch 'CR_2865_RNG_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_2865: hwrng: Reworked driver for speed performance and efficiency
See merge request sdk/linux!640
shengyang.chen [Fri, 16 Dec 2022 08:15:39 +0000 (16:15 +0800)]
riscv: linux: vout: fix cusor problem
fix cusor bluring problem of debian
Signed-off-by: keith <keith.zhao@starfivetech.com>
William Qiu [Thu, 15 Dec 2022 09:03:28 +0000 (17:03 +0800)]
riscv: dts: mmc:modify mmc1 config
modify mmc1 config
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Xingyu Wu [Thu, 15 Dec 2022 06:48:40 +0000 (14:48 +0800)]
clk: starfive: pll: Remove high frequency of PLL0
Remove high frequency of PLL0 and make sure PLL0 max frequency is 1.5GHz.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 15 Dec 2022 06:17:59 +0000 (14:17 +0800)]
clk: starfive: Change divider value of cpu_core clock
Change divider value to make sure the frequency is half of PLL0.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Jia Jie Ho [Wed, 14 Dec 2022 06:14:39 +0000 (14:14 +0800)]
CR_2865: hwrng: Reworked driver for speed performance and efficiency
Changes:
1. Reseed during init only, not for every read.
2. Completion struct for irqreturn for better efficiency.
3. Add module_param for reseed operations based on request counter
and/or timer countdown.
4. Removed unused macros and steps.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
shengyang.chen [Wed, 14 Dec 2022 02:46:19 +0000 (10:46 +0800)]
riscv: linux: vout: fix rgb2hdmi display problem
fix problem of rgb2hdmi without display in first test
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
Andy Hu [Fri, 9 Dec 2022 16:16:09 +0000 (00:16 +0800)]
Merge remote-tracking branch 'sdk/jh7110-5.15.y-devel' into vf2-515-devel
andy.hu [Fri, 9 Dec 2022 04:49:48 +0000 (04:49 +0000)]
Merge branch 'CR_2822_PCIE_Kevin.xie' into 'jh7110-5.15.y-devel'
CR 2822 riscv: configs: Add port bus driver for PCIe switch.
See merge request sdk/linux!633
andy.hu [Fri, 9 Dec 2022 04:46:38 +0000 (04:46 +0000)]
Merge branch 'CR_2796_515_sound_card_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2796_515_sound_card_Xingyu.Wu
See merge request sdk/linux!631
andy.hu [Fri, 9 Dec 2022 04:45:04 +0000 (04:45 +0000)]
Merge branch 'CR_2789_refresh_uboot/spl_under_kernel_5.15_ziv.xu' into 'jh7110-5.15.y-devel'
CR_2789_refresh_uboot/spl_under_kernel_5.15_ziv.xu
See merge request sdk/linux!635
Xingyu Wu [Tue, 22 Nov 2022 03:42:34 +0000 (11:42 +0800)]
sound:starfive:Move playback and capture driver as slave to starfive I2S
Move playback and capture driver as slave from snps I2S merge to starfive I2S.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
ziv.xu [Fri, 2 Dec 2022 09:26:19 +0000 (17:26 +0800)]
riscv:jh7110.dtsi: add uboot and spl partition on qspi node
add uboot and spl partition on qspi node
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Andy Hu [Wed, 7 Dec 2022 08:55:40 +0000 (16:55 +0800)]
Merge remote-tracking branch 'sdk/jh7110-5.15.y-devel' into vf2-515-devel
Kevin.xie [Wed, 7 Dec 2022 06:20:16 +0000 (14:20 +0800)]
riscv: configs: Add port bus driver for PCIe switch.
Verified on JH7110EVB with ASMedia EV Board (asm1806 version).
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Xingyu Wu [Tue, 6 Dec 2022 03:19:51 +0000 (11:19 +0800)]
riscv: dts: starfive: jh7110: Add multiple sound cards
Add multiple sound cards to let one device corresponds to
one sound card.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Andy Hu [Tue, 6 Dec 2022 10:43:31 +0000 (18:43 +0800)]
e24: xrp: remove from Kconfig and Makefile
since run git filter-repo, then need to remove from Kconfig and
Makefile
Signed-off-by: Andy Hu <andy.hu@starfivetech.com>
Jianlong Huang [Fri, 2 Dec 2022 03:01:42 +0000 (11:01 +0800)]
configs:starfive:Enable QSPI for visionfive2
Enable QSPI for visionfive2
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 2 Dec 2022 02:43:01 +0000 (10:43 +0800)]
Merge tag 'JH7110_515_SDK_v3.3.0' into vf2-515-devel
version JH7110_515_SDK_v3.3.0 for JH7110 EVB board
andy.hu [Thu, 1 Dec 2022 10:52:21 +0000 (10:52 +0000)]
Merge branch 'CR_2650_PWM_hal.feng' into 'jh7110-5.15.y-devel'
CR 2650 PWM hal.feng
See merge request sdk/linux!626
andy.hu [Thu, 1 Dec 2022 10:37:13 +0000 (10:37 +0000)]
Merge branch 'CR_2653_QSPI_5.15_ziv.xu' into 'jh7110-5.15.y-devel'
CR 2653 QSPI 5.15 ziv.xu
See merge request sdk/linux!612
andy.hu [Thu, 1 Dec 2022 10:35:43 +0000 (10:35 +0000)]
Merge branch 'CR_2752_CPUfreq_515_mason.huo' into 'jh7110-5.15.y-devel'
CR_2752 riscv: dts: Change cpu vdd per stress test
See merge request sdk/linux!624
Hal Feng [Wed, 30 Nov 2022 07:15:11 +0000 (15:15 +0800)]
pwm: starfive: Use pm_runtime functions to disable clock when the device being removed
So this can avoid disabling the pwm clock again when
the pwm device is suspended and being removed.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
mason.huo [Mon, 28 Nov 2022 01:14:51 +0000 (09:14 +0800)]
riscv: dts: Change cpu vdd per stress test
Jianlong Huang [Sat, 26 Nov 2022 07:49:42 +0000 (15:49 +0800)]
Merge tag 'JH7110_515_SDK_v3.2.0' into vf2-515-devel
version JH7110_515_SDK_v3.2.0 for JH7110 EVB board
andy.hu [Fri, 25 Nov 2022 12:56:08 +0000 (12:56 +0000)]
Merge branch 'CR_2651_spi_dtbo_reload_faild_5.15_ziv.xu' into 'jh7110-5.15.y-devel'
CR_2651_spi_dtbo_reload_faild_5.15_ziv.xu
See merge request sdk/linux!619
andy.hu [Fri, 25 Nov 2022 10:31:21 +0000 (10:31 +0000)]
Merge branch 'CR_2463_PCIE_Kevin.xie' into 'jh7110-5.15.y-devel'
CR 2463 drivers: nvme: Add precheck and delay for CQE pending status.
See merge request sdk/linux!621
Kevin.xie [Thu, 24 Nov 2022 08:59:12 +0000 (16:59 +0800)]
drivers: nvme: Add precheck and delay for CQE pending status.
To workaroud the NVMe I/O timeout problem in bootup S10udev case
which caused by the CQE update lantancy.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
ziv.xu [Wed, 23 Nov 2022 06:53:58 +0000 (14:53 +0800)]
spi-pl022-starfive:fix the problem of spi overlay reload
fix the problem of spi overlay reload
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Jianlong Huang [Sat, 19 Nov 2022 14:51:04 +0000 (22:51 +0800)]
Merge tag 'JH7110_515_SDK_v3.1.0' into vf2-515-devel
version JH7110_515_SDK_v3.1.0 for JH7110 EVB board
ziv.xu [Tue, 15 Nov 2022 01:50:09 +0000 (09:50 +0800)]
driver:spi-cadence-quadspi: enable qspi
enable qspi
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
andy.hu [Thu, 17 Nov 2022 09:18:17 +0000 (09:18 +0000)]
Merge branch 'CR_2429_spi_error_of_freq-5.15_ziv.xu' into 'jh7110-5.15.y-devel'
CR 2429 spi error of freq 5.15 ziv.xu
See merge request sdk/linux!603
andy.hu [Thu, 17 Nov 2022 09:12:03 +0000 (09:12 +0000)]
Merge branch 'CR_2661_V4L2_Kevin.xie' into 'jh7110-5.15.y-devel'
CR 2661 v4l2_driver: vin: Add skip frames for isp control.
See merge request sdk/linux!610
andy.hu [Thu, 17 Nov 2022 09:08:34 +0000 (09:08 +0000)]
Merge branch 'CR_2434_imx219_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_2434_imx219_515_changhuang.liang media: v4l2_driver: Supplement the missing runtime pm get ops on more than once stream_on cases.
See merge request sdk/linux!595
andy.hu [Thu, 17 Nov 2022 07:10:11 +0000 (07:10 +0000)]
Merge branch 'CR_2642_PCIe_Kevin.xie' into 'jh7110-5.15.y-devel'
CR 2642 drivers: pci: Set PCIe PCI standard configuration ID.
See merge request sdk/linux!613
andy.hu [Thu, 17 Nov 2022 07:02:36 +0000 (07:02 +0000)]
Merge branch 'CR_2583_fix_usb_resume_hub_minda' into 'jh7110-5.15.y-devel'
CR_2583 USB: core: Fix bug in resuming hub's handling of wakeup requests
See merge request sdk/linux!600
andy.hu [Thu, 17 Nov 2022 06:53:09 +0000 (06:53 +0000)]
Merge branch 'CR_2588_515_watchdog_timeleft_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2588_515_watchdog_timeleft_Xingyu.Wu
See merge request sdk/linux!597
andy.hu [Thu, 17 Nov 2022 06:51:07 +0000 (06:51 +0000)]
Merge branch 'CR_2621_CPUIDLE_mason.huo' into 'jh7110-5.15.y-devel'
CR_2621 riscv: dts: Remove unsupported cpuidle state
See merge request sdk/linux!608
andy.hu [Thu, 17 Nov 2022 06:48:28 +0000 (06:48 +0000)]
Merge branch 'CR_2435_hibernation-for-main_5.15_vout_shengyang.chen' into 'jh7110-5.15.y-devel'
CR_2435: clk:starfive:vout:Add runtime and system pm && riscv:linux:drm: Add runtime and system pm
See merge request sdk/linux!596
Kevin.xie [Tue, 15 Nov 2022 09:27:32 +0000 (17:27 +0800)]
drivers: pci: Set PCIe PCI standard configuration ID.
Class - PCI-to-PCI bridge.
Revision - 2.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Kevin.xie [Tue, 15 Nov 2022 06:04:20 +0000 (14:04 +0800)]
v4l2_driver: vin: Add skip frames for isp control.
The duration of extra isp control skip frames are fixed to 1 second.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
ziv.xu [Tue, 15 Nov 2022 08:06:06 +0000 (16:06 +0800)]
starfive:defconfig: modify defconfig to enable qspi
modify defconfig to enable qspi
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Xingyu Wu [Thu, 10 Nov 2022 09:02:38 +0000 (17:02 +0800)]
drm:verisilicon:hdmi-audio:Adjust when to configure registers
Adjust when to configure registers before HDMI suspend.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 8 Nov 2022 14:04:07 +0000 (22:04 +0800)]
dma:dw:Add stg_axi clock and reset of noc_bus
Add 'JH7110_NOC_BUS_CLK_STG_AXI' clock and
'RSTN_U0_NOC_BUS_STG_AXI_N' reset.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
shengyang.chen [Wed, 9 Nov 2022 02:15:19 +0000 (10:15 +0800)]
riscv:linux:drm : fix vout pm bug
fix display problem of hdmi sys pm
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Fri, 4 Nov 2022 10:17:52 +0000 (18:17 +0800)]
riscv:linux:drm: fix double display bug
fix double display bug
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Fri, 4 Nov 2022 10:17:06 +0000 (18:17 +0800)]
linux:dts:starfive: remove some useless port of vout dts
fix double display bug
remove some useless port of vout dts
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Wed, 2 Nov 2022 03:35:47 +0000 (11:35 +0800)]
riscv:linux:drm: Add basic runtime and system pm support for vout
Add basic runtime and system pm support for vout
remove some useless clk/rst function and calling in vs_dc.c
improve vout driver structure
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Wed, 2 Nov 2022 03:34:32 +0000 (11:34 +0800)]
linux:dts:starfive: Add pm support for vout dts
Add pm support for vout dts
remove some useless port of vout dts
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
Xingyu Wu [Tue, 8 Nov 2022 13:53:31 +0000 (21:53 +0800)]
clk:starfive:vout:Add parent about disp_apb clk
Clock "u0_pclk_mux_func_pclk" is the parent of "disp_apb" clock.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Wed, 19 Oct 2022 09:06:17 +0000 (17:06 +0800)]
clk:starfive:vout:Add runtime and system pm
Add runtime and system pm in vout clock tree driver.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
ziv.xu [Thu, 10 Nov 2022 08:13:19 +0000 (16:13 +0800)]
spi-pl022-starfive.c: prompt warning when frequency does not surpport
prompt warning when frequency does not surpport
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
mason.huo [Fri, 11 Nov 2022 02:13:04 +0000 (10:13 +0800)]
riscv: dts: Remove unsupported cpuidle state
The cpuidle state1 is also implemented in sbi with
WFI C state, but it cause audio play failed.
Remove the cpuidle state1.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
Alan Stern [Sat, 1 Jan 2022 19:52:14 +0000 (14:52 -0500)]
USB: core: Fix bug in resuming hub's handling of wakeup requests
Bugzilla #213839 reports a 7-port hub that doesn't work properly when
devices are plugged into some of the ports; the kernel goes into an
unending disconnect/reinitialize loop as shown in the bug report.
This "7-port hub" comprises two four-port hubs with one plugged into
the other; the failures occur when a device is plugged into one of the
downstream hub's ports. (These hubs have other problems too. For
example, they bill themselves as USB-2.0 compliant but they only run
at full speed.)
It turns out that the failures are caused by bugs in both the kernel
and the hub. The hub's bug is that it reports a different
bmAttributes value in its configuration descriptor following a remote
wakeup (0xe0 before, 0xc0 after -- the wakeup-support bit has
changed).
The kernel's bug is inside the hub driver's resume handler. When
hub_activate() sees that one of the hub's downstream ports got a
wakeup request from a child device, it notes this fact by setting the
corresponding bit in the hub->change_bits variable. But this variable
is meant for connection changes, not wakeup events; setting it causes
the driver to believe the downstream port has been disconnected and
then connected again (in addition to having received a wakeup
request).
Because of this, the hub driver then tries to check whether the device
currently plugged into the downstream port is the same as the device
that had been attached there before. Normally this check succeeds and
wakeup handling continues with no harm done (which is why the bug
remained undetected until now). But with these dodgy hubs, the check
fails because the config descriptor has changed. This causes the hub
driver to reinitialize the child device, leading to the
disconnect/reinitialize loop described in the bug report.
The proper way to note reception of a downstream wakeup request is
to set a bit in the hub->event_bits variable instead of
hub->change_bits. That way the hub driver will realize that something
has happened to the port but will not think the port and child device
have been disconnected. This patch makes that change.
Cc: <stable@vger.kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YdCw7nSfWYPKWQoD@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: minda.chen <minda.chen@starfivetech.com>
Xingyu Wu [Wed, 9 Nov 2022 06:34:14 +0000 (14:34 +0800)]
watchdog: starfive: Get timeleft correctly
Use flag to count timeleft and the flag is base on
reading register instead of interrupt handler function.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Jianlong Huang [Thu, 10 Nov 2022 00:22:14 +0000 (08:22 +0800)]
Merge tag 'JH7110_515_SDK_v3.0.0-rc3' into vf2-515-devel
version JH7110_515_SDK_v3.0.0-rc3 for JH7110 EVB board
andy.hu [Wed, 9 Nov 2022 11:22:58 +0000 (11:22 +0000)]
Merge branch 'CR_2553_ytphy_515_samin.guo' into 'jh7110-5.15.y-devel'
CR_2553: 515: Use ytphy_link_change_notify to detect link changes by yt8521/YT8531.
See merge request sdk/linux!592
jianlong.huang [Wed, 9 Nov 2022 10:26:48 +0000 (10:26 +0000)]
Merge branch 'CR_2556_vf2_515_DRM_mipi_new_panel_keith.zhao' into 'vf2-515-devel'
800*1280屏幕 支持开机探测 解决默认状态为 connected 的问题
See merge request sbc/linux!47
Samin Guo [Fri, 4 Nov 2022 01:42:40 +0000 (09:42 +0800)]
net:phy:motorcomm: Fix the problem that phytool cannot be used by YT8531
phy_read_status should not judge the auto negotiation speed, which
will cause 0x1e to be frequently modified.
JH7110B In different speed modes, the tx_inverted needs to be
dynamically updated to match the timming.
known issue:
Function yt8521_read_status, it will be executed once per second.
Can read and write ext reg (0xa001/a002/a003). This may causes the ext value
read by the phytool always is 0.
$ phytool write eth0/0/0x1e 0xa001
$ phytool read eth0/0/0x1f
0000
To avoid this problem, you can read 0x1f as fast as possible after
writing 0x1e.
$ phytool write eth0/0/0x1e 0xa001; phytool read eth0/0/0x1f
0x8160
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
keith.zhao [Wed, 9 Nov 2022 02:43:13 +0000 (18:43 -0800)]
riscv:linux:vout:mipi
add 800*1280 I2C read to detect the status of connection
Signed-off-by: keith <keith.zhao@starfivetech.com>
Kevin.xie [Tue, 8 Nov 2022 08:37:45 +0000 (16:37 +0800)]
media: v4l2_driver: Supplement the missing runtime pm get ops on more than once stream_on cases.
For example, if we run stf_isp_ctrl & v4l2test at the same time,
s_stream for sensor will be called twice,
so that rpm should be got twice too.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
Jianlong Huang [Thu, 3 Nov 2022 10:17:17 +0000 (18:17 +0800)]
Revert "dts:starfive:Disable spi"
Have fixed spi issue which lead to crash booting.
This reverts commit
bb1b47228930974ab386badc2544a2dbd49ddc18.
Jianlong Huang [Thu, 3 Nov 2022 10:13:30 +0000 (18:13 +0800)]
configs:Sync configs of jh7110
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
keith.zhao [Mon, 31 Oct 2022 09:51:53 +0000 (17:51 +0800)]
riscv:linux:vout:mipi
mipi dsi driver add 800*1280 panel : update panel driver code
Signed-off-by: keith <keith.zhao@starfivetech.com>
keith.zhao [Mon, 31 Oct 2022 09:50:48 +0000 (17:50 +0800)]
riscv:linux:vout:mipi
mipi dsi driver add 800*1280 panel: update dts and config
Signed-off-by: keith <keith.zhao@starfivetech.com>
Jianlong Huang [Mon, 31 Oct 2022 01:47:30 +0000 (09:47 +0800)]
configs:starfive:Default CPUFREQ governor ondemand
Change Default CPUFREQ governor to ondemand.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 31 Oct 2022 01:31:44 +0000 (09:31 +0800)]
regulator:axp1506:Remove regulator ALDO4
Fix bug, remove sdio_vdd and remove ALDO4 enum.
Which may cause cpu freq don't work.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 29 Oct 2022 13:16:07 +0000 (21:16 +0800)]
dts:starfive:Disable spi
System crash when booting due to pl022_runtime_suspend.
Next version will fix it.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 29 Oct 2022 06:45:27 +0000 (14:45 +0800)]
configs: enable CPU_FREQ
enable cpu freq function
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Samin Guo [Fri, 21 Oct 2022 09:28:39 +0000 (17:28 +0800)]
net:stmmac:dwc-qos: add support for external rmii_rtx clocks
JH7110A use external rmii_rtx clk for tx clk on 100M/10M mode.
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Jianlong Huang [Thu, 20 Oct 2022 01:23:51 +0000 (09:23 +0800)]
regulator:axp15060:Remove sdio vdd regulator
Visionfive2 emmc is default 1.8V, there is no need to controll the voltage.
Remove sdio_vdd node and code.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 18 Oct 2022 03:31:28 +0000 (11:31 +0800)]
configfs: Enable SND_SOC_STARFIVE_I2S
Support hdmi audio
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 17 Oct 2022 14:15:24 +0000 (22:15 +0800)]
arch:dts:starfive:Enable i2stx_4ch0 node
Add mclk_ext pin and enable i2stx_4ch0
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 17 Oct 2022 13:45:03 +0000 (21:45 +0800)]
riscv:dts:jh7110: Modify CMA reserved space to better support 2G DRAM
When the DDR is 2G (0x40000000-0xc0000000), it may cause address usage
problems.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Samin Guo [Mon, 17 Oct 2022 10:59:39 +0000 (18:59 +0800)]
riscv:starfive:jh7110: change gmac0 tx delay to 0xa
0xa will better match gmac0 tx in 1000M
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Samin Guo [Wed, 12 Oct 2022 05:05:44 +0000 (13:05 +0800)]
dts:starfive:jh7110: set gmac phy tx_inverted for JH7110B+YT8531PHY.
JH7110B requires tx_inverted_10/100/1000 configuration, and different parameters
may be required in 10M/100M/1000M mode.
This parameter supports JH7110B+YT8531PHY by default. Other boards can
modify the parameters of the tx_inverted_10/100/1000 to obtain support.
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Jianlong Huang [Wed, 12 Oct 2022 02:00:10 +0000 (10:00 +0800)]
dts: starfive: Add A11 dts for vf2 version 1.1 board
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Tue, 27 Sep 2022 02:50:28 +0000 (10:50 +0800)]
dts: starfive: Enable gpio restart
Add gpio restart dts node
Enable gpio restart config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 24 Sep 2022 00:46:23 +0000 (08:46 +0800)]
dts: starfive: Enable usb device node
Sync jh7110 usb device node and enable
Sync jh7110 imx219 compatible name
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Sat, 24 Sep 2022 00:45:26 +0000 (08:45 +0800)]
configs: visionfive2: Enable usb device config
Sync jh7110 usb device config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 09:44:30 +0000 (17:44 +0800)]
config: Add led config
Enable led trigger heartbeat
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 09:43:13 +0000 (17:43 +0800)]
dts: starfive: Add led node
Add led node on dts file
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 06:54:44 +0000 (14:54 +0800)]
dts: starfive: Move wm8960 and ac108 node under i2c form dtsi file to wm8960/ac108 file
The default dts do not contain wm8960/ac108, move to the other file.
The booting of default dts do not have wrong log about wm8960/ac108
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 19 Sep 2022 00:50:08 +0000 (08:50 +0800)]
dts: starfive: Replace stf to starfive
Forget to replace stf to starfive on dtbo file
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 15 Sep 2022 00:56:06 +0000 (08:56 +0800)]
dts: starfive: enhance SD card io Output Drive Strength
SD card gpio is generic gpio on visionfive2, the default output drive strength may be not enough, some sd card do not work.
So enhance the gpio output drive strength to max.
But on visionfive2, the sd card gpio is fixed 3.3V, there is no need to switch_voltage and not support uhs mode.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 15 Sep 2022 00:47:20 +0000 (08:47 +0800)]
dts: starfive: Replace sf to starfive
Because upstream requirement.
Replace sf to starfive.
Replace hdmi_output to rgb_output.
Replace encoder to dsi_output
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Thu, 1 Sep 2022 07:22:36 +0000 (15:22 +0800)]
dts: starfive: Add wm8960 and ac108 dts
Add wm8960 and ac108 dts base default dts
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Mon, 29 Aug 2022 00:57:59 +0000 (08:57 +0800)]
configs: starfive: sync jh7110 config to visionfive2
sync jh7110 config to visionfive2 about audio config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
mason.huo [Tue, 23 Aug 2022 03:44:09 +0000 (11:44 +0800)]
riscv: dts: Change the cpu_vdd_0p9 to cpu_vdd
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
jianlonghuang [Tue, 23 Aug 2022 01:13:07 +0000 (09:13 +0800)]
dts: starfive: Add ac108 dts config
Add ac108 dts
Signed-off-by: jianlonghuang <jianlong.huang@starfivetech.com>
Jianlong Huang [Wed, 17 Aug 2022 05:57:35 +0000 (13:57 +0800)]
dts: starfive: update vf2 dts base on new board A1.1
reserve vf2 old board A1.0 dts as jh7110-visionfive-v2-A10.dts
new board A1.1 dts as default, jh7110-visionfive-v2.dts
vf2 dts common as jh7110-visionfive-v2.dtsi
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 19 Aug 2022 02:58:36 +0000 (10:58 +0800)]
dts: starfive: Add ac108 dts config
Add ac108 dts and config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Jianlong Huang [Fri, 19 Aug 2022 02:22:44 +0000 (10:22 +0800)]
Revert "v4l2: imx219 use pinctrl"
This patch just for evb
This reverts commit
8d7c702d7bc0fef9ee5882db660390801bbccaa7.
Jianlong Huang [Wed, 27 Jul 2022 10:02:18 +0000 (18:02 +0800)]
dts: starfive: sync evb dts and config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
yanhong.wang [Mon, 25 Jul 2022 06:45:36 +0000 (14:45 +0800)]
riscv: configs: jh7110: Enable StarFive dwmac
Enable StarFive dwmac.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>