panfrost/midgard: Report tls_size

Pipe through the number of bytes of spilled memory used from the
compiler into the main driver, where it will be used to allocate the
Thread Local Storage buffer.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Set `initialized` in more cases

Indirect linear writes were not being marked as initialized, causing the
back blit to be dropped, breaking the listed tests.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/ci: Update expectations

We've fixed some shader tests.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/midgard: Promote to *move*, not rewrite for non-SSA

Fixes promoted uniform loads to registers.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/midgard: Dump MIR of RA failure

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard; Dump successor graph when printing MIR

We just use the pointers of the midgard_block*, which is crude, but it
gets the point across and will help debug successor related issues.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Remove debug statement

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/midgard: Implement register spilling

Now that we run RA in a loop, before each iteration after a failed
allocation we choose a spill node and spill it to Thread Local Storage
using st_int4/ld_int4 instructions (for spills and fills respectively).

This allows us to compile complex shaders that normally would not fit
within the 16 work register limits, although it comes at a fairly steep
performance penalty.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/midgard: Add mir_has_arg helper

Helps scan the MIR for uses of an index.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/midgard: Check write-before-read in liveness analysis

If we write to an index before reading it, the old copy we're checking
liveness for isn't live in this block, even if it does get read later.
Fixes abnormally high register pressure in shaders with loops.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/midgard/disasm: Check for certain tag errors

Midgard bundles contain a tag, as well as a copy of the tag of the next
bundle to facilitate prefetch. Do some simple static analysis to detect
certain tag errors (particularly on shaders without branching).

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add OP_IS_CSEL helper

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_rewrite_index_src_single helper

Rather than rewriting an index away across the whole block, we expose
finer (per-instruction) granularity for rewrites.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Ignore inline_constant in liveness

It doesn't make any sense to look at it.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost/midgard: Implement load/store scratch opcodes

These are used to load/store from Thread Local Storage, which is memory
allocated per-thread (corresponding to ctx->scratchpad in the command
stream) and used for register spilling.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midg/disasm: Check for int varying ops

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Remove "aliasing"

It was a crazy idea that didn't pan out. We're better served by a good
copyprop pass. It's also unused now.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Promote uniform registers late

Rather than creating either a load or a uniform register read with a
fixed beginning offset, we always create a load and then promote to a
uniform register later. This will allow us to promote in a register
pressure aware manner.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Call scheduler/RA in a loop

This will allow us to insert instructions as a result of register
allocation, permitting spilling to be implemented. As a side effect,
with the assert commented out this would fix a bunch of glamor crashes
(due to RA failures) so MATE becomes useable.

Ideally we'll have scheduling or RA actually sorted out before the
branch point but if not this gives us a one-line out to get X working...

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Remove custom register selection callback

What we have is equivalent to the default callback; let's use that.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

radv: fix crash in vkCmdClearAttachments with unused attachment

depth_stencil_attachment and/or ds_resolve attachment can be NULL.

This fixes crashes with
dEQP-VK.renderpass.suballocation.unused_clear_attachments.*

Cc: 19.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

i965: free object labels when deleting

Some leaks detected with GL_KHR_debug on i965.

CC: Timothy Arceri <t_arceri@yahoo.com.au>
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

radv/gfx10: update descriptors for inline uniform blocks

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv/gfx10: emit the GS NGG prologue before the nested barrier

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv/gfx10: do not allocate space for the ZPASS_DONE bug

GFX10 isn't affected.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv/gfx10: do not set ELEMENT_SIZE for buffer descriptors

This field doesn't exist.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: clean up fill_geom_tess_rings()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: change a bunch of >= GFX9 to == GFX9

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac/nir: do not clamp shadow reference on GFX10

RadeonSI only uses Z32_FLOAT_CLAMP for upgraded depth textures
on GFX10 and RADV doesn't promotes Z16 or Z24.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: move nir_opt_conditional_discard out of optimization loop

This late optimization pass is only affected by nir_opt_if() and handles all cases
in a single pass. It's enough to call it once after the optimization loop.
No changes on vkpipeline-db.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

v3d: fill logicop_func in the fragment shader key when precompiling shaders

Since logicop_func 0 is PIPE_LOGIOP_CLEAR, we were trigger lowerinng
of logic ops on precompiled shaders, which we don't want to do. Also, this
had the side effect of making shader-db crash, as during this lowering we
would try to read the color format swizzle information from the fragment shader
key that we don't populate in precompiled shaders because right now we only
need it when logic operations are enabled.

Reviewed-by: Eric Anholt <eric@anholt.net>

v3d: Avoid scheduling an instruction that stalls waiting for SFU retval

If we detect that a scheduling candidate will stall because having a
register source that is the written by the SFU unit in the previous
instruction we reduce its priority so any non stalling operation would
be chosen.

The latency of SFU operations is defined as 2. So they would be scheduled
earlier if other candidates have the same priority.

Finally we won't merge instructions that stall to a previously chosen one.
As the result of the previous one would be waiting for an extra cycle.

Although shader-db result show that instruction are hurt with an increase
of 0.35% the sum of instructions + stalls is reduced a 0.52%. And
the total of sfu-stalls is reduced a 63.51%. It implies also a small
increase in the max-temps metric because of scheduling earlier SFU
operations.

total instructions in shared programs: 9102719 -> 9117851 (0.17%)
instructions in affected programs: 4324628 -> 4339760 (0.35%)
helped: 4162
HURT: 12128
helped stats (abs) min: 1 max: 10 x̄: 1.28 x̃: 1
helped stats (rel) min: 0.09% max: 4.76% x̄: 0.66% x̃: 0.51%
HURT stats (abs)   min: 1 max: 27 x̄: 1.69 x̃: 1
HURT stats (rel)   min: 0.05% max: 7.69% x̄: 0.87% x̃: 0.68%
95% mean confidence interval for instructions value: 0.90 0.96
95% mean confidence interval for instructions %-change: 0.47% 0.50%
Instructions are HURT.

total max-temps in shared programs: 1327728 -> 1327812 (<.01%)
max-temps in affected programs: 4730 -> 4814 (1.78%)
helped: 61
HURT: 134
helped stats (abs) min: 1 max: 2 x̄: 1.08 x̃: 1
helped stats (rel) min: 2.70% max: 13.33% x̄: 4.89% x̃: 4.17%
HURT stats (abs)   min: 1 max: 3 x̄: 1.12 x̃: 1
HURT stats (rel)   min: 1.54% max: 20.00% x̄: 6.10% x̃: 5.26%
95% mean confidence interval for max-temps value: 0.28 0.58
95% mean confidence interval for max-temps %-change: 1.80% 3.52%
Max-temps are HURT.

total sfu-stalls in shared programs: 99551 -> 36324 (-63.51%)
sfu-stalls in affected programs: 95029 -> 31802 (-66.53%)
helped: 25882
HURT: 0
helped stats (abs) min: 1 max: 27 x̄: 2.44 x̃: 2
helped stats (rel) min: 5.26% max: 100.00% x̄: 79.86% x̃: 100.00%
95% mean confidence interval for sfu-stalls value: -2.47 -2.42
95% mean confidence interval for sfu-stalls %-change: -80.18% -79.54%
Sfu-stalls are helped.

total inst-and-stalls in shared programs: 9202270 -> 9154175 (-0.52%)
inst-and-stalls in affected programs: 5618516 -> 5570421 (-0.86%)
helped: 22728
HURT: 855
helped stats (abs) min: 1 max: 31 x̄: 2.16 x̃: 1
helped stats (rel) min: 0.07% max: 16.67% x̄: 1.14% x̃: 0.92%
HURT stats (abs)   min: 1 max: 5 x̄: 1.25 x̃: 1
HURT stats (rel)   min: 0.12% max: 5.26% x̄: 1.24% x̃: 0.86%
95% mean confidence interval for inst-and-stalls value: -2.07 -2.01
95% mean confidence interval for inst-and-stalls %-change: -1.07% -1.05%
Inst-and-stalls are helped.

v2: Rename v3d_qpu_generates_sfu_stalls to v3d_qpu_instr_is_sfu (Eric)

Reviewed-by: Eric Anholt <eric@anholt.net>

v3d: add shader-db stat to count SFU stalls

SFU operations have a latency of 2 cicles, so if their results
are used in the following cycle to a SFU instruction, the GPU
stalls for an extra cycle until the result is available.

This adds the number of stalls to the shader-db debug mode and
sum of instruction + stalls to evaluate optimizations to schedule
instructions that avoid generating sfu-stalls.

v2: Rename v3d_qpu_generates_sfu_stalls to v3d_qpu_instr_is_sfu (Eric)

Reviewed-by: Eric Anholt <eric@anholt.net>

radv: replace memset()+strcpy() with snprintf()

Just like the next line :)

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: drop unnecessary memset() before snprintf()

snprintf() always terminates the string.

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv:  Fix uninitialized warning.

For es_vgpr_comp_cnt.

Fixes: 795adbbadd4 "radv/gfx10: Add pipeline state support for tess."
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

virgl: fix a sync issue in virgl_buffer_transfer_extend

In virgl_buffer_transfer_extend, when no flush is needed, it tries
to extend a previously queued transfer instead if it can find one.
Comparing to virgl_resource_transfer_prepare, it fails to check if
the resource is busy.

The existence of a previously queued transfer normally implies that
the resource is not busy, maybe except for when the transfer is
PIPE_TRANSFER_UNSYNCHRONIZED.  Rather than burdening us with a
lengthy comment, and potential concerns over breaking it as the
transfer code evolves, this commit makes the valid_buffer_range
check the only condition to take the fast path.

In real world, we hit the fast path almost only because of the
valid_buffer_range check.  In micro benchmarks, the condition should
always be true, otherwise the benchmarks are not very representative
of meaningful workloads.  I think this fix is justified.

The recent change to PIPE_TRANSFER_MAP_DIRECTLY usage disables the
fast path.  This commit re-enables it as well.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

virgl: rework virgl_transfer_queue_extend

Do not take a transfer and do the memcpy.  Add a _buffer suffix to
the function name to make it clear that it is only for buffers.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

virgl: fix virgl_buffer_transfer_extend

Without setting hw_res, virgl_transfer_queue_extend never finds a
match and always returns NULL.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

radeonsi: initialize scissor registers etc. without clear state

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: return success from vi_dcc_clear_level to simplify callers

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: fix compute-based culling regression in 1ce52c1e373

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: fix VGT_PRIMITIVE_TYPE programming

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: enable Wave32 for vertex, geometry, and tessellation shaders

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: add debug options to enable/disable Wave32

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: add as_ngg variant for TES as ES to select Wave32/64

Legacy GS has to use Wave64, so TES before GS has to use Wave64 too.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: implement Wave32

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: use 32-bit wavemasks for Wave32

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac: create the LLVM builder in ac_llvm_context_init

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac: create the LLVM module for Wave32 or Wave64 in ac_llvm_context_init

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac/rtld: add support for Wave32

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac: add Wave32 LLVM target machine

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac: initial Wave32 support in LLVM build helpers

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: assume that selector != NULL for compute shaders

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: remove what appears to be legacy compute code

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: remove si_program::use_code_object_v2

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: add si_shader_selector into si_compute

Now we can assume that shader->selector is always set.
This will simplify some code.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: set threadgroup size to 0 for threadgroups with only 1 wave

This has no effect on Wave64.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: set as_ngg for GS prolog

as_ngg is required by Wave32.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: remove the disable_ngg option

because legacy VS hangs.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: combine hw edgeflags with user edgeflags for correct behavior

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: deduplicate code for esvert_lds_size

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: simplify a streamout loop in gfx10_emit_ngg_epilogue

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: don't use MALLOC for outputs

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: clean up ESGS ring size computation

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: fix unnecessary LDS overallocation for NGG GS

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: don't compile the GS copy shader if it's 100% not needed

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: set GE_CTNL.PACKET_TO_ONE_PA for NGG

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: update a tunable max_es_verts_base for NGG

We have to fix the computation so as not to break quads.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: implement ARB_post_depth_coverage

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: fix leaked compute shader NIR

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: save the enable_nir option in the shader cache correctly

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/gfx10: enable SDMA

no changes since gfx9 for buffers

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac: use llvm.amdgcn.writelane

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac: fix shader clock on LLVM 9

Probably relevant commit:

commit dd32dc3f72ec99b1794d62c74d2beb3b60468d50
Author: Stanislav Mekhanoshin <Stanislav.Mekhanoshin@amd.com>
Date:   Tue Jul 9 03:10:18 2019 +0000

    [AMDGPU] Always use s_memtime for readcyclecounter

    Differential Revision: https://reviews.llvm.org/D64369

    git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365431 91177308-0d34-0410-b5e6-96231b3b80d8

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeon/vcn: adding engine type for new fw interface

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: use the correct buffer size in si_vid_clear_buffer

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: add EXT_dsa glEnabledIndexedEXT

The implementation uses _mesa_ActiveTexture to change the active texture unit and
then reset it.

It causes an unnecessary _NEW_TEXTURE_STATE but:
  - adding an index argument to _mesa_set_enable causes a lot of changes (~140 callers)
  - enable_texture (called by _mesa_set_enable) might cause a _NEW_TEXTURE_STATE
    anyway.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glGetTextureLevelParameter*vEXT functions

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa gl(Copy)Texture(Sub)Image1D/2D/3DEXT functions

Added functions:
- glTextureImage1DEXT
- glTextureImage2DEXT
- glTextureImage3DEXT
- glTextureSubImage1DEXT
- glTextureSubImage3DEXT
- glCopyTextureImage1DEXT
- glCopyTextureImage2DEXT
- glCopyTextureSubImage1DEXT
- glCopyTextureSubImage2DEXT
- glCopyTextureSubImage3DEXT
- glGetTextureImageEXT

All but the last one can be compiled in a display list.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: move lookup_texture_ext_dsa up in teximage.c

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: pass gl_texture_object as arg to not depend on state

This will allow to use the same functions for EXT_dsa implementation.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: refactor get_texture_image to remove duplicate code

Move shared code in a new function (_get_texture_image) and use it instead
of duplicating the same lines.
Will be also used by the EXT_dsa functions (GetTextureImageEXT and GetMultiTexImageEXT).

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

pipe-loader: use radeonsi for MM if amdgpu dri is used

The amdgpu dri is used for the closed source AMD driver. Since this driver
does not implement multimedia, we fall back to radeonsi in mesa to do
multimedia. This corrects the dri driver name for when it is set to amdgpu.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Signed-off-by: Jeremy Newton <Jeremy.Newton@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

egl: drop incorrect pkg-config file for glvnd

With b01524fff05eef66e8cd ("meson: don't build libGLES*.so with GLVND")
we dropped the incorrect pkg-config files for GLES*.

Since then, the glvnd issue of its missing files has become painfully
apparent, since it break the build for everyone using glvnd.

NVIDIA has had a fix for a few years now, but has yet to accept it:
https://github.com/NVIDIA/libglvnd/pull/86

Since the breakage is already there, let's clean up everything on our side
while we wait for NVIDIA to accept the fix.

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

docs: simplify `Fixes:` git command

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>

mesa/tests: add missing dep_thread

Fixes: f8c27c277585141f2d27 ("state_tracker: Move the format test out to be an actual unit test.")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Vinson Lee <vlee@freedesktop.org>

util: drop strncat(), strcmp(), strncmp(), snprintf() & vsnprintf() MSVC fallbacks

It would seem MSVC>=2015 is now C99-compliant wrt these functions:
strncat:   https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/strncat-strncat-l-wcsncat-wcsncat-l-mbsncat-mbsncat-l?view=vs-2017
strcmp:    https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/strcmp-wcscmp-mbscmp?view=vs-2017
strncmp:   https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/strncmp-wcsncmp-mbsncmp-mbsncmp-l?view=vs-2017
snprintf:  https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/snprintf-snprintf-snprintf-l-snwprintf-snwprintf-l?view=vs-2017
vsnprintf: https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/vsnprintf-vsnprintf-vsnprintf-l-vsnwprintf-vsnwprintf-l?view=vs-2017

Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for vsnprintf()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for snprintf()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for vasprintf()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for sprintf()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for strcmp()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for strcasecmp()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for strncmp()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for strncat()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for strdup()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: use standard name for strchrnul()

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: drop unused vsprintf() wrapper

Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

util: drop unused strchr() wrapper

Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>