Yao Qi [Fri, 21 Nov 2014 14:05:41 +0000 (22:05 +0800)]
Import wchar and wctype-h explicitly
gnulib module wchar and wctype-h was imported as a dependency, but
they are used by gdb_wchar.h too. This patch is to import them
explicitly.
gdb:
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add wchar
and wctype-h.
* gnulib/import/Makefile.am: Re-generated.
* gnulib/import/Makefile.in: Likewise.
* gnulib/import/m4/gnulib-cache.m4: Likewise.
Yao Qi [Fri, 21 Nov 2014 14:05:41 +0000 (22:05 +0800)]
Import memchr explicitly
memchr has been used in gdb source and gnulib memchr module was
imported as a dependency. This patch is to import it explicitly.
gdb:
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
memchr.
* gnulib/import/Makefile.am: Re-generated.
* gnulib/import/Makefile.in: Likewise.
* gnulib/import/m4/gnulib-cache.m4: Likewise.
Yao Qi [Fri, 21 Nov 2014 14:05:41 +0000 (22:05 +0800)]
Include alloca.h unconditionally
Since gnulib alloca module was imported, we can include alloca.h in
both gdb and gdbserver unconditionally, so this patch adds inclusion
of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA
in configure.ac because we don't need to check alloca any more.
This patch below is removed in fact.
[RFA/commit] include alloca.h if available.
https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html
Since alloca.h is from gnulib now, we don't have to check malloc.h in
configure and include malloc.h in code. This patch also remove them
too.
gdb:
2014-11-21 Yao Qi <yao@codesourcery.com>
* common/common-defs.h: Include alloca.h
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
* configure: Re-generated.
* defs.h: Remove code handling alloca.
* utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined
or not.
gdb/gdbserver:
2014-11-21 Yao Qi <yao@codesourcery.com>
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
(AC_CHECK_HEADERS): Remove malloc.h.
* configure: Re-generated.
* config.in: Re-generated.
* server.h: Don't include alloca.h and malloc.h.
* gdbreplay.c: Don't check HAVE_ALLOCA_H is defined.
Don't include malloc.h.
Yao Qi [Fri, 21 Nov 2014 14:05:41 +0000 (22:05 +0800)]
Import alloca explicitly
gnulib's alloca module was imported to gdb, and alloca is used. This
patch is to explicitly import it.
gdb:
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULE): Add
alloca.
* gnulib/import/Makefile.am: Re-generated.
* gnulib/import/Makefile.in: Likewise..
* gnulib/import/m4/gnulib-cache.m4: Likewise.
Yao Qi [Fri, 21 Nov 2014 14:05:41 +0000 (22:05 +0800)]
Make IMPORTED_GNULIB_MODULES in alphabetical order
Since we'll add more modules in this list, better to keep them in
alphabetical order.
gdb:
* gnulib/update-gnulib.sh: Make IMPORTED_GNULIB_MODULES in
alphabetical order.
Nick Clifton [Fri, 21 Nov 2014 13:37:39 +0000 (13:37 +0000)]
Resolve more problems with readelf uncovered by fuzzing binary files.
PR binutils/17531
* readelf.c (process_version_sections): Prevent an infinite loop
processing corrupt version need data.
(process_corefile_note_segment): Handle corrupt notes.
Alexander Cherepanov [Fri, 21 Nov 2014 11:19:49 +0000 (11:19 +0000)]
Fix a snafu setting up the string table read in from a COFF file.
PR binutils/17512
* coffgen.c (_bfd_coff_read_string_table): Test allocation of
string table before clearing the first few bytes.
Terry Guo [Fri, 21 Nov 2014 03:54:39 +0000 (11:54 +0800)]
Calculate ARM arch attribute after relaxation
gas/
2014-11-21 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (md_assemble): Do not consider relaxation.
(md_convert_frag): Test and set target arch attribute accordingly.
(aeabi_set_attribute_string): Turn it into a global function.
* config/tc-arm.h (md_post_relax_hook): Enable it for ARM target.
(aeabi_set_public_attributes): Declare it.
gas/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* gas/arm/attr-arch-assumption.d: New file.
* gas/arm/attr-arch-assumption.s: Likewise.
ld/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* ld-arm/tls-longplt-lib.s: Require ARMv6T2.
* ld-arm/tls-longplt.s: Likewise.
* ld-arm/tls-longplt-lib.d: Updated.
* ld-arm/tls-longplt.d: Likewise.
Terry Guo [Fri, 21 Nov 2014 03:31:37 +0000 (11:31 +0800)]
Support ARM Cortex-M7
include/ChangeLog:
2014-11-21 Terry Guo <terry.guo@arm.com>
* opcode/arm.h (FPU_VFP_EXT_ARMV8xD): New macro.
(FPU_VFP_V5D16): Likewise.
(FPU_VFP_V5_SP_D16): Likewise.
(FPU_ARCH_VFP_V5D16): Likewise.
(FPU_ARCH_VFP_V5_SP_D16): Likewise.
bfd/ChangeLog:
2014-11-21 Terry Guo <terry.guo@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Support FPv5.
binutils/ChangeLog:
2014-11-21 Terry Guo <terry.guo@arm.com>
* readelf.c (arm_attr_tag_FP_arch): Extended to support FPv5.
gas/ChangeLog:
2014-11-21 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (fpu_vfp_ext_armv8xd): New.
(arm_cpus): Support cortex-m7.
(arm_fpus): Support fpv5-sp-d16 and fpv5-d16.
(do_vfp_nsyn_cvt_fpv8): Generate error when use D register for S
register only target like FPv5-SP-D16.
(do_neon_cvttb_1): Likewise.
(do_vfp_nsyn_fpv8): Likewise.
(do_vrint_1): Likewise.
(aeabi_set_public_attributes): Set proper FP arch for FPv5.
* doc/c-arm.texi: Document new cpu and fpu names for cortex-m7.
gas/testsuite/ChangeLog:
2014-11-21 Terry Guo <terry.guo@arm.com>
* gas/arm/armv7e-m+fpv5-d16.s: New.
* gas/arm/armv7e-m+fpv5-d16.d: Likewise.
* gas/arm/armv7e-m+fpv5-sp-d16.s: Likewise.
* gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise.
ld/testsuite/ChangeLog:
2014-11-21 Terry Guo <terry.guo@arm.com>
* ld-arm/attr-merge-vfp-4-sp.s: New test source file.
* ld-arm/attr-merge-vfp-5-sp.s: Likewise.
* ld-arm/attr-merge-vfp-5.s: Likewise.
* ld-arm/attr-merge-vfp-8.d: New test.
* ld-arm/attr-merge-vfp-8r.d: Likewise.
* ld-arm/attr-merge-vfp-9.d: Likewise.
* ld-arm/attr-merge-vfp-9r.d: Likewise.
* ld-arm/attr-merge-vfp-10.d: Likewise.
* ld-arm/attr-merge-vfp-10r.d: Likewise.
* ld-arm/attr-merge-vfp-11.d: Likewise.
* ld-arm/attr-merge-vfp-11r.d: Likewise.
* ld-arm/attr-merge-vfp-12.d: Likewise.
* ld-arm/attr-merge-vfp-12r.d: Likewise.
* ld-arm/attr-merge-vfp-13.d: Likewise.
* ld-arm/attr-merge-vfp-13r.d: Likewise.
* ld-arm/attr-merge-vfp-14.d: Likewise.
* ld-arm/attr-merge-vfp-14r.d: Likewise.
* ld-arm/arm-elf.exp: Run the new tests.
Joel Brobecker [Thu, 2 Oct 2014 22:17:49 +0000 (15:17 -0700)]
Handling of empty Ada ranges with a negative upper bound.
Consider the following variable declaration:
type Array_Type is array (Integer range <>) of Integer;
Var: Array_Type (0 .. -1);
"ptype var" prints the wrong upper bound for that array:
(gdb) ptype var
type = array (0 ..
4294967295) of integer
The debugging info for the type of variable "Var" is as follow:
<2><cf>: Abbrev Number: 13 (DW_TAG_structure_type)
<d0> DW_AT_name : foo__var___PAD
<3><db>: Abbrev Number: 14 (DW_TAG_member)
<dc> DW_AT_name : F
<e0> DW_AT_type : <0xa5>
This is just an artifact from code generation, which is just
a wrapper that we should ignore. The real type is the type of
field "F" in that PAD type, which is described as:
<2><a5>: Abbrev Number: 10 (DW_TAG_array_type)
<a6> DW_AT_name : foo__TvarS
<3><b6>: Abbrev Number: 11 (DW_TAG_subrange_type)
<b7> DW_AT_type : <0xc1>
<bb> DW_AT_lower_bound : 0
<bc> DW_AT_upper_bound : 0xffffffff
Trouble occurs because DW_AT_upper_bound is encoded using
a DW_FORM_data4, which is ambiguous regarding signedness.
In that case, dwarf2read.c::dwarf2_get_attr_constant_value
reads the value as unsigned, which is not what we want
in this case.
As it happens, we already have code dealing with this situation
in dwarf2read.c::read_subrange_type which checks whether
the subrange's type is signed or not, and if it is, fixes
the bound's value by sign-extending it:
if (high.kind == PROP_CONST
&& !TYPE_UNSIGNED (base_type) && (high.data.const_val & negative_mask))
high.data.const_val |= negative_mask;
Unfortunately, what happens in our case is that the base type
of the array's subrange type is marked as being unsigned, and
so we never get to apply the sign extension. Following the DWARF
trail, the range's base type is described as another subrange type...
<2><c1>: Abbrev Number: 12 (DW_TAG_subrange_type)
<c7> DW_AT_name : foo__TTvarSP1___XDLU_0__1m
<cb> DW_AT_type : <0x2d>
... whose base type is, (finally), a basic type (signed):
<1><2d>: Abbrev Number: 2 (DW_TAG_base_type)
<2e> DW_AT_byte_size : 4
<2f> DW_AT_encoding : 5 (signed)
<30> DW_AT_name : integer
The reason why GDB thinks that foo__TTvarSP1___XDLU_0__1m
(the base type of the array's range type) is an unsigned type
is found in gdbtypes.c::create_range_type. We consider that
a range type is unsigned iff its lower bound is >= 0:
if (low_bound->kind == PROP_CONST && low_bound->data.const_val >= 0)
TYPE_UNSIGNED (result_type) = 1;
That is normally sufficient, as one would expect the upper bound to
always be greater or equal to the lower bound. But Ada actually
allows the declaration of empty range types where the upper bound
is less than the lower bound. In this case, the upper bound is
negative, so we should not be marking the type as unsigned.
This patch fixes the issue by simply checking the upper bound as well
as the lower bound, and clears the range type's unsigned flag when
it is found to be constant and negative.
gdb/ChangeLog:
* gdbtypes.c (create_range_type): Unset RESULT_TYPE's
flag_unsigned if HIGH_BOUND is constant and negative.
gdb/testsuite/ChangeLog:
* gdb.ada/n_arr_bound: New testcase.
Tested on x86_64-linux.
GDB Administrator [Fri, 21 Nov 2014 00:00:10 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Thu, 20 Nov 2014 21:45:04 +0000 (08:15 +1030)]
PPC gold doesn't check for overflow properly
* powerpc.cc (Target_powerpc::Relocate::relocate): Correct test
for undefined weaks.
H.J. Lu [Thu, 20 Nov 2014 21:35:29 +0000 (13:35 -0800)]
Don't run pr17618 test on x32
* ld-x86-64/pr17618.d: Don't run on x32.
H.J. Lu [Thu, 20 Nov 2014 21:29:41 +0000 (13:29 -0800)]
Update plt-main tests for x32
* ld-x86-64/plt-main1.rd: Updated for x32.
* ld-x86-64/plt-main2.rd: Likewise.
* ld-x86-64/plt-main3.rd: Likewise.
* ld-x86-64/plt-main4.rd: Likewise.
H.J. Lu [Thu, 20 Nov 2014 20:41:11 +0000 (12:41 -0800)]
Add function and function pointer tests
This patch adds tests for function and function pointer.
* ld-x86-64/plt-lib.c: New file.
* ld-x86-64/plt-main.out: Likewise.
* ld-x86-64/plt-main1.c: Likewise.
* ld-x86-64/plt-main1.rd: Likewise.
* ld-x86-64/plt-main2.c: Likewise.
* ld-x86-64/plt-main2.rd: Likewise.
* ld-x86-64/plt-main3.c: Likewise.
* ld-x86-64/plt-main3.rd: Likewise.
* ld-x86-64/plt-main4.c: Likewise.
* ld-x86-64/plt-main4.rd: Likewise.
* ld-x86-64/plt-main5.c: Likewise.
* ld-x86-64/x86-64.exp: Run plt-main tests.
H.J. Lu [Thu, 20 Nov 2014 19:29:45 +0000 (11:29 -0800)]
Always load function pointer into a stack variable
This patch makes sure that compiler won't optimize out loading function
into a stack variable.
* ld-ifunc/ifunc-main.c (get_bar): New function.
(main): Use it.
H.J. Lu [Thu, 20 Nov 2014 18:48:47 +0000 (10:48 -0800)]
Add ifunc-main IFUNC tests
* ld-ifunc/ifunc.exp: Run ifunc-main.
* ld-ifunc/ifunc-lib.c: New file.
* ld-ifunc/ifunc-main.c: Likewise.
* ld-ifunc/ifunc-main.out: Likewise.
Sergio Durigan Junior [Thu, 20 Nov 2014 18:33:28 +0000 (13:33 -0500)]
Fix build breakage from previous commit
In the previous commit, I forgot to adjust the prototypes of the
functions inside gdb/xml-syscall.c for the case when GDB is compiled
without XML support.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* xml-syscall.c (set_xml_syscall_file_name): Remove "const"
modifier from "struct gdbarch" when compiling without Expat (XML)
support.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
Sergio Durigan Junior [Thu, 20 Nov 2014 17:28:18 +0000 (12:28 -0500)]
Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead of global
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
Richard Earnshaw [Thu, 20 Nov 2014 17:02:47 +0000 (17:02 +0000)]
* config/tc-arm.c (rotate_left): Avoid undefined behaviour when N = 0.
H.J. Lu [Thu, 20 Nov 2014 16:59:42 +0000 (08:59 -0800)]
Run IFUNC run-time tests only if IFUNC is supported
* lib/ld-lib.exp (check_ifunc_available): New.
* ld-ifunc/ifunc.exp: Run IFUNC run-time tests only if IFUNC
is supported.
Doug Evans [Thu, 20 Nov 2014 15:42:48 +0000 (07:42 -0800)]
Split struct symtab into two: struct symtab and compunit_symtab.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
Richard Earnshaw [Thu, 20 Nov 2014 15:28:52 +0000 (15:28 +0000)]
[AArch64] Fix mis-detection of unpredictable load/store operations with FP regs.
* config/tc-aarch64.c (warn_unpredictable_ldst): Check that transfer
registers are in the GP register set. Adjust warnings. Use correct
field member for address register.
* testsuite/gas/aarch64/diagnostic.l: Update.
Alan Modra [Thu, 20 Nov 2014 08:31:23 +0000 (19:01 +1030)]
PPC gold doesn't check for overflow properly
Corrects overflow test for rel14, addr14, rel24, addr24 branch relocs,
and prints an information message to give a hint as to how a branch
that can't reach a stub might be cured.
bfd/
* elf64-ppc.c (group_sections): Init stub14_group_size from
--stub-group-size parameter divided by 1024.
gold/
* powerpc.cc (Stub_control::Stub_control): Init stub14_group_size_
from --stub-group-size parameter divided by 1024.
(Powerpc_relocate_functions::rela, rela_ua): Add fieldsize
template parameter. Update all uses.
(Target_powerpc::Relocate::relocate): Rename has_plt_value to
has_stub_value. Set for long branches. Don't report overflow for
branch to undefined weak symbols. Print info message on
overflowing branch to stub.
Alan Modra [Thu, 20 Nov 2014 10:37:58 +0000 (21:07 +1030)]
ppc476 workaround sizing
* elf32-ppc.c (ppc_elf_relax_section): Correct ppc476 workaround
alignment calculation.
Joel Brobecker [Thu, 20 Nov 2014 08:10:41 +0000 (12:10 +0400)]
[Ada] XA type is not redundant if the ranges' subtypes do not match
Jan noticed that gdb.ada/arrayidx.exp regressed after I applied
the following patch:
commit
8908fca5772fcff9f7766158ba2aa59f5a2b1f68
Author: Joel Brobecker <brobecker@adacore.com>
Date: Sat Sep 27 09:09:34 2014 -0700
Subject: [Ada] Ignore __XA types when redundant.
What happens is that we're trying to print the value of
r_two_three, which is defined as follow:
type Index is (One, Two, Three);
type RTable is array (Index range Two .. Three) of Integer;
R_Two_Three : RTable := (2, 3);
The expected output is:
(gdb) p r_two_three
$1 = (two => 2, 3)
But after the patch above was applied, with the program program
compiled using gcc-gnat-4.9.2-1.fc21.x86_64 (x86_64-linux),
the output becomes:
(gdb) p r_two_three
$1 = (2, 3)
(the name of the first bound is missing). The problem comes from
the fact that the compiler described the array's index type as
a plain base type, instead of as a subrange of the enumerated type.
More particularly, this is what gcc-gnat-4.9.2-1.fc21.x86_64
generated:
<3><7ce>: Abbrev Number: 9 (DW_TAG_array_type)
<7cf> DW_AT_name : (indirect string, offset: 0xc13): p__rtable
[...]
<7d7> DW_AT_GNAT_descriptive_type: <0x98a>
[...]
<4><7df>: Abbrev Number: 8 (DW_TAG_subrange_type)
<7e0> DW_AT_type : <0xa79>
where DIE 0xa79 is:
<1><a79>: Abbrev Number: 2 (DW_TAG_base_type)
<a7a> DW_AT_byte_size : 8
<a7b> DW_AT_encoding : 7 (unsigned)
<a7c> DW_AT_name : (indirect string, offset: 0xfc): sizetype
The actual array subrange type can be found in the array's
parallel XA type (the DW_AT_GNAT_descriptive_type).
The recent commit correctly found that that bounds taken from
the descriptive type are the same as bounds of our array's index
type. But it failed to notice that ignoring this descriptive
type would make us lose the actual array index type, making us
think that we're printing an array indexed by integers.
I hadn't seen that problem, because the compiler I used produced
debugging info where the array's index type is correctly described:
<3><79f>: Abbrev Number: 10 (DW_TAG_array_type)
<7a0> DW_AT_name : (indirect string, offset: 0xb3d): p__rtable
[...]
<4><7b0>: Abbrev Number: 8 (DW_TAG_subrange_type)
<7b1> DW_AT_type : <0x9b2>
<7b5> DW_AT_upper_bound : 2
... where DIE 0x9b2 leads us to ...
<3><9b2>: Abbrev Number: 9 (DW_TAG_subrange_type)
[...]
<9b8> DW_AT_type : <0x962>
<2><962>: Abbrev Number: 22 (DW_TAG_enumeration_type)
<963> DW_AT_name : (indirect string, offset: 0xb34): p__index
[...]
This patch fixes the issue by also making sure that the subtype
of the original range type does match the subtype found in the
descriptive type.
gdb/ChangeLog:
* ada-lang.c (ada_is_redundant_range_encoding): Return 0
if the TYPE_CODE of range_type's base type does not match
the TYPE_CODE of encoding_type's base type.
Terry Guo [Thu, 20 Nov 2014 05:54:27 +0000 (13:54 +0800)]
Enable to link ARM object file that hasn't attribute section.
bfd/ChangeLog
2014-11-20 Terry Guo <terry.guo@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Skip if input bfd
hasn't attribute section.
ld/testsuite/ChangeLog:
2014-11-20 Terry Guo <terry.guo@arm.com>
* ld-arm/attr-merge-nosection-1.d: New file.
* ld-arm/attr-merge-nosection-1a.s: Likewise.
* ld-arm/attr-merge-nosection-1b.s: Likewise.
* ld-arm/arm-elf.exp: Include the new test.
GDB Administrator [Thu, 20 Nov 2014 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Wed, 19 Nov 2014 22:22:46 +0000 (08:52 +1030)]
Default powerpc64 to --plt-thread-safe for Go
Go is multi-threaded, so use thread-safe plt stubs. __go_go doesn't
actually start threads, but is a convenient libgo function with a
reasonably unique name that is called by all Go executables. (Threads
are started by a static function of libgo, runtime_newosproc, called
by a whole lot of global functions, including runtime_starttheworld
and runtime_main.)
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Add __go_go to thread_starters.
gold/
* powerpc.cc (Target_powerpc::do_relax): Add __go_go to thread_starters.
Jan-Benedict Glaw [Wed, 19 Nov 2014 13:18:17 +0000 (14:18 +0100)]
Fix date in ChangeLog entry
Jan-Benedict Glaw [Wed, 19 Nov 2014 13:13:30 +0000 (14:13 +0100)]
Fix signedness warning
This is the updated version using uintptr_t as Alan Modra suggested.
2014-11-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* dwarf.c (process_extended_line_op): Fix signedness warning.
Jiong Wang [Wed, 19 Nov 2014 09:35:23 +0000 (09:35 +0000)]
[AArch64] Warn on load pair to same register
2014-11-19 Ryan Mansfield <rmansfield@qnx.com>
* config/tc-aarch64.c (md_assemble): Call warn_unpredictable_ldst.
(warn_unpredictable_ldst): New.
2014-11-19 Ryan Mansfield <rmansfield@qnx.com>
* gas/aarch64/diagnostic.s: Add new warnings test patterns.
* gas/aarch64/diagnostic.l: Update expected diagnostic output.
Andreas Arnez [Mon, 17 Nov 2014 15:22:48 +0000 (15:22 +0000)]
Use 2-byte instead of 4-byte NOP on S390 in 'bp-permanent' test case
The bp-permanent test case assumes that a NOP is exactly as long as a
software breakpoint. This is not the case for the S390 "nop"
instruction, which is 4 bytes long, while a software breakpoint is
just 2 bytes long. The "nopr" instruction has the right size and can
be used instead.
Without this patch the test case fails on S390 when trying to continue
after SIGTRAP on the permanent breakpoint:
...
Continuing.
Program received signal SIGILL, Illegal instruction.
test () at /home/arnez/src/binutils-gdb/gdb/testsuite/gdb.base/bp-permanent.c:40
40 NOP; /* after permanent bp */
(gdb)
FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0:
basics: stop at permanent breakpoint
With this patch the test case succeeds without any FAILs.
gdb/testsuite/ChangeLog:
* gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
4-byte instruction on S390.
Joel Brobecker [Tue, 7 Oct 2014 00:22:21 +0000 (02:22 +0200)]
[Ada] gdb.ada/complete.exp failure on x86_64-windows
Using the example in gdb.ada/complete.exp, the following command
on x86_64-windows returns one unwanted completion choice :
(gdb) complete p pck
p <pck_E>>
[all following completions entries snipped, all expected]
I tracked down this suprising entry to a minimal symbol whose name
is ".refptr.pck_E". The problem occurs while trying to see if
this symbol matches "pck" when doing wild-matching as we are doing
here:
/* Second: Try wild matching... */
if (!match && wild_match_p)
{
/* Since we are doing wild matching, this means that TEXT
may represent an unqualified symbol name. We therefore must
also compare TEXT against the unqualified name of the symbol. */
sym_name = ada_unqualified_name (ada_decode (sym_name));
if (strncmp (sym_name, text, text_len) == 0)
match = 1;
}
What happens is that ada_decode correctly identifies the fact that
SYM_NAME (".refptr.pck_E") is not following any GNAT encoding, and
therefore returns that same name, but bracketed: "<.refptr.pck_E>".
This is the convention we use for telling GDB that the decoded name
is not a real Ada name - and therefore should not be encoded for
operations such as name matching, symbol lookups, etc. So far, so good.
Next is the call to ada_unqualified_name, which unfortunately does
not notice that the decoded name it is being given isn't a natural
symbol, and just blindly strips everything up to the last do, returning
"pck_E>". And of course, "pck_E>" matches "pck" now, and so we end
up accepting this symbol as a match.
This patch fixes the problem by making ada_unqualified_name a little
smarter by making sure that the given decoded symbol name does not
start with '<'.
gdb/ChangeLog:
* ada-lang.c (ada_unqualified_name): Return DECODED_NAME if
it starts with '<'.
Tested on x86_64-windows using AdaCore's testsuite as well as
on x86_64-linux.
Joel Brobecker [Sat, 27 Sep 2014 16:09:34 +0000 (09:09 -0700)]
[Ada] Ignore __XA types when redundant.
Consider the following code which declares a variable A2 which
is an array of arrays of integers.
type Array2_First is array (24 .. 26) of Integer;
type Array2_Second is array (1 .. 2) of Array2_First;
A1 : Array1_Second := ((10, 11, 12), (13, 14, 15));
Trying to print the type of that variable currently yields:
(gdb) ptype A2
type = array (1 .. 2, 24 .. 26) of integer
This is not correct, as this is the description of a two-dimension
array, which is different from an array of arrays. The expected
output is:
(gdb) ptype a2
type = array (1 .. 2) of foo_n926_029.array2_first
GDB's struct type currently handles multi-dimension arrays the same
way arrays of arrays, where each dimension is stored as a sub-array.
The ada-valprint module considers that consecutive array layers
are in fact multi-dimension arrays. For array of arrays, a typedef
layer is introduced between the two arrays, creating a break between
each array type.
In our situation, A2 is a described as a typedef of an array type...
.uleb128 0x8 # (DIE (0x125) DW_TAG_variable)
.ascii "a2\0" # DW_AT_name
.long 0xfc # DW_AT_type
.uleb128 0x4 # (DIE (0xfc) DW_TAG_typedef)
.long .LASF5 # DW_AT_name: "foo__array2_second"
.long 0x107 # DW_AT_type
.uleb128 0x5 # (DIE (0x107) DW_TAG_array_type)
.long .LASF5 # DW_AT_name: "foo__array2_second"
.long 0xb4 # DW_AT_type
.uleb128 0x6 # (DIE (0x114) DW_TAG_subrange_type)
.long 0x11b # DW_AT_type
.byte 0x2 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x107
... whose element type is, as expected, a typedef to the sub-array
type:
.uleb128 0x4 # (DIE (0xb4) DW_TAG_typedef)
.long .LASF4 # DW_AT_name: "foo__array2_first"
.long 0xbf # DW_AT_type
.uleb128 0x9 # (DIE (0xbf) DW_TAG_array_type)
.long .LASF4 # DW_AT_name: "foo__array2_first"
.long 0xd8 # DW_AT_GNAT_descriptive_type
.long 0x1c5 # DW_AT_type
.uleb128 0xa # (DIE (0xd0) DW_TAG_subrange_type)
.long 0xf0 # DW_AT_type
.byte 0x18 # DW_AT_lower_bound
.byte 0x1a # DW_AT_upper_bound
.byte 0 # end of children of DIE 0xbf
The reason why things fails is that, during expression evaluation,
GDB tries to "fix" A1's type. Because the sub-array has a parallel
(descriptive) type (DIE 0xd8), GDB thinks that our array's index
type must be dynamic and therefore needs to be fixed. This in turn
causes the sub-array to be "fixed", which itself results in the
typedef layer to be stripped.
However, looking closer at the parallel type, we see...
.uleb128 0xb # (DIE (0xd8) DW_TAG_structure_type)
.long .LASF8 # DW_AT_name: "foo__array2_first___XA"
[...]
.uleb128 0xc # (DIE (0xe4) DW_TAG_member)
.long .LASF10 # DW_AT_name: "foo__Tarray2_firstD1___XDLU_24__26"
... that all it tells us is that the array bounds are 24 and 26,
which is already correctly provided by the array's DW_TAG_subrange_type
bounds, meaning that this parallel type is just redundant.
Parallel types in general are slowly being removed in favor of
standard DWARF constructs. But in the meantime, this patch kills
two birds with one stone:
1. It recognizes this situation where the XA type is useless,
and saves an unnecessary range-type fixing;
2. It fixes the issue at hand because ignoring the XA type results
in no type fixing being required, which allows the typedef layer
to be preserved.
gdb/ChangeLog:
* ada-lang.c (ada_is_redundant_range_encoding): New function.
(ada_is_redundant_index_type_desc): New function.
(to_fixed_array_type): Ignore parallel XA type if redundant.
gdb/testsuite/ChangeLog:
* gdb.ada/arr_arr: New testcase.
Tested on x86_64-linux.
Joel Brobecker [Fri, 12 Sep 2014 01:38:04 +0000 (18:38 -0700)]
varsize-limit error printing element of packed array...
... when that packed array is part of a discriminated record and
one of the bounds is a discriminant.
Consider the following code:
type FUNNY_CHAR_T is (NUL, ' ', '"', '#', [etc]);
type FUNNY_STR_T is array (POSITIVE range <>) of FUNNY_CHAR_T;
pragma PACK (FUNNY_STR_T);
type FUNNY_STRING_T (SIZE : NATURAL := 1) is
record
STR : FUNNY_STR_T (1 .. SIZE) := (others => '0');
LENGTH : NATURAL := 4;
end record;
TEST: FUNNY_STRING_T(100);
GDB is able to print the value of variable "test" and "test.str".
But not "test.str(1)":
(gdb) p test
$1 = (size => 100, str => (33 'A', nul <repeats 99 times>), length => 1)
(gdb) p test.str
$2 = (33 'A', nul <repeats 99 times>)
(gdb) p test.str(1)
object size is larger than varsize-limit
The problem occurs during the phase where we are trying to resolve
the expression subscript operation. On the one hand of the subscript
operator, we have the result of the evaluation of "test.str", which
is our packed array. We have the following code to handle packed
arrays in particular:
if (ada_is_constrained_packed_array_type
(desc_base_type (value_type (argvec[0]))))
argvec[0] = ada_coerce_to_simple_array (argvec[0]);
This eventually leads to a call to constrained_packed_array_type
to return the "simple array". This function relies on a parallel
___XA type, when available, to determine the bounds. In our case,
we find type...
failure__funny_string_t__T4b___XA"
... which has one field describing the bounds of our array as:
failure__funny_string_t__T3b___XDLU_1__size
The part that interests us is after the ___XD suffix or,
in other words: "LU_1__size". What this means in GNAT encoding
parlance is that the lower bound is 1, and that the upper bound
is the value of "size". "size" is our discriminant in this case.
Normally, we would access the record's discriminant in order to
get the upper bound's value, but we do not have that information,
here. We are in a mode where we are just trying to "fix" the type
without an actual value. This is what the call to to_fixed_range_type
is doing, and because the fix'ing fails, it ends up returning
the ___XDLU type unmodified as our index type.
This shouldn't be a problem, except that the later part of
constrained_packed_array_type then uses that index_type to
determine the array size, via a call to get_discrete_bounds.
The problem is that the upper bound of the ___XDLU type is
dynamic (in the DWARF sense) while get_discrete_bounds implicitly
assumes that the bounds are static, and therefore accesses
them using macros that assume the bounds values are constants:
case TYPE_CODE_RANGE:
*lowp = TYPE_LOW_BOUND (type);
*highp = TYPE_HIGH_BOUND (type);
This therefore returns a bogus value for the upper bound,
leading to an unexpectedly large size for our array, which
later triggers the varsize-limit guard we've seen above.
This patch avoids the problem by adding special handling
of dynamic range types. It also extends the documentation
of the constrained_packed_array_type function to document
what happens in this situation.
gdb/ChangeLog:
* ada-lang.c (constrained_packed_array_type): Set the length
of the return array as if both bounds where zero if that
returned array's index type is dynamic.
gdb/testsuite/ChangeLog:
* gdb.ada/pkd_arr_elem: New Testcase.
Tested on x86_64-linux.
Yao Qi [Sat, 15 Nov 2014 08:03:40 +0000 (16:03 +0800)]
Don't set CC in config/i386/go32.mh
I cross-compile gdb for msdosdjgpp (both target and host is
i586-pc-msdosdjgpp), so the CC should be i586-pc-msdosdjgpp-gcc.
However, CC is set incorrectly to gcc after config/i386/go32.mh is inlined
into the Makefile.
This patch is to remove the CC setting in config/i386/go32.mh.
gdb:
2014-11-19 Yao Qi <yao@codesourcery.com>
* config/i386/go32.mh (CC): Remove.
GDB Administrator [Wed, 19 Nov 2014 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 18 Nov 2014 19:03:09 +0000 (11:03 -0800)]
Check PC-relative offset overflow in PLT entry
This patch checks PC-relative offset overflow in pushq instruction in
x86-64 PLT entry.
bfd/
PR ld/17618
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Check
PC-relative offset overflow in PLT entry.
ld/testsuite/
PR ld/17618
* ld-x86-64/x86-64.exp: Run pr17618 for Linux target.
* ld-x86-64/pr17618.d: New file.
* ld-x86-64/pr17618.s: Likewise.
Doug Evans [Tue, 18 Nov 2014 17:41:45 +0000 (09:41 -0800)]
symtab.h (SYMTAB_BLOCKVECTOR): Renamed from BLOCKVECTOR. All uses updated.
gdb/ChangeLog:
* symtab.h (SYMTAB_BLOCKVECTOR): Renamed from BLOCKVECTOR. All uses
updated.
Doug Evans [Tue, 18 Nov 2014 17:36:15 +0000 (09:36 -0800)]
buildsym API cleanup
gdb/ChangeLog:
* buildsym.c (buildsym_objfile): New static global.
(buildsym_comp_dir): New static global.
(finish_block_internal): Delete arg objfile. All callers updated.
(finish_block): Delete arg objfile. All callers updated.
(start_subfile): Delete arg dirname. All callers updated.
(patch_subfile_names): Update buildsym_comp_dir.
(get_macro_table): Delete arg objfile. All callers updated.
(start_symtab): New arg objfile. All callers updated.
Rename arg dirname to comp_dir.
(reset_symtab_globals): Initialize buildsym_objfile, buildsym_comp_dir.
(end_symtab_get_static_block): Delete arg objfile. All callers
updated.
(end_symtab_without_blockvector): Ditto.
(end_symtab_with_blockvector): Ditto.
(end_symtab_from_static_block): Ditto.
(end_symtab): Ditto.
(end_expandable_symtab): Ditto.
(augment_type_symtab): Ditto.
* coffread.c (coff_start_symtab): New arg objfile. All callers
updated.
Nick Clifton [Tue, 18 Nov 2014 17:35:39 +0000 (17:35 +0000)]
Fixes a seg-fault when displaying the time data for a corrupt archive.
PR binutuls/17605
* bucomm.c (print_arelt_descr): Check for ctime returning NULL.
Doug Evans [Tue, 18 Nov 2014 17:32:10 +0000 (09:32 -0800)]
symtab.h (SYMTAB_LINETABLE): Renamed from LINETABLE. All uses updated.
gdb/ChangeLog:
* symtab.h (SYMTAB_LINETABLE): Renamed from LINETABLE. All uses
updated.
Doug Evans [Tue, 18 Nov 2014 17:28:32 +0000 (09:28 -0800)]
SYMTAB_DIRNAME: New macro.
gdb/ChangeLog:
* symtab.h (SYMTAB_DIRNAME): New macro. All uses of member
symtab.dirname updated to use it.
Doug Evans [Tue, 18 Nov 2014 17:19:11 +0000 (09:19 -0800)]
SYMTAB_OBJFILE: New macro.
gdb/ChangeLog:
* symtab.h (SYMTAB_OBJFILE): New macro. All uses of member
symtab.objfile updated to use it.
Doug Evans [Tue, 18 Nov 2014 17:00:15 +0000 (09:00 -0800)]
Fix memory leak in watch_main_source_file_lossage.
gdb/ChangeLog:
* buildsym.c (watch_main_source_file_lossage): Fix memory leak.
Doug Evans [Tue, 18 Nov 2014 16:54:06 +0000 (08:54 -0800)]
Use SYMBOL_OBJFILE more.
gdb/ChangeLog:
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
SYMBOL_OBJFILE.
* findvar.c (default_read_var_value): Ditto.
* jv-lang.c (add_class_symtab_symbol): Ditto.
* parse.c (operator_check_standard): Ditto.
* printcmd.c (address_info): Ditto.
* symtab.c (fixup_symbol_section): Ditto.
(skip_prologue_sal): Ditto.
* tracepoint.c (scope_info): Ditto.
* valops.c (find_function_in_inferior): Ditto.
* guile/scm-symbol.c (syscm_eq_symbol_smob): Ditto.
* python/py-symbol.c (set_symbol): Ditto.
Doug Evans [Tue, 18 Nov 2014 16:28:04 +0000 (08:28 -0800)]
Split up end_symtab_from_static_block into two.
This patch is conceptually quite simple.
If you look at end_symtab_from_static_block you'll see
that the static_block == NULL case is completely different
than the non-NULL case.
There's a lot of complexity to handle the NULL case but it seems
entirely unnecessary. For example, whether blockvector is NULL
is decided at the start, before this for loop:
for (subfile = subfiles; subfile; subfile = nextsub)
Secondly, after the for loop, we test symtab for non-NULL here:
/* Set this for the main source file. */
if (symtab)
but symtab will only ever be non-NULL if blockvector was non-NULL.
And if blockvector was non_NULL so will symtab.
The other case to consider is these lines of code executed before
the for loop:
/* Read the line table if it has to be read separately.
This is only used by xcoffread.c. */
if (objfile->sf->sym_read_linetable != NULL)
objfile->sf->sym_read_linetable (objfile);
/* Handle the case where the debug info specifies a different path
for the main source file. It can cause us to lose track of its
line number information. */
watch_main_source_file_lossage ();
From my reading of the code, neither of these is useful
in the static_block == NULL case.
Thus we can make the code more readable by splitting these two cases up,
which is what this patch does.
gdb/ChangeLog:
* buildsym.c (main_subfile): New static global.
(free_subfiles_list): New function.
(start_symtab): Set main_subfile.
(restart_symtab): Replace init of subfiles, current_subfile with
call to free_subfiles_list.
(watch_main_source_file_lossage): Use main_subfile.
(reset_symtab_globals): Replace init of current_subfile with call
to free_subfiles_list.
(end_symtab_without_blockvector, end_symtab_with_blockvector): New
functions, split out from ...
(end_symtab_from_static_block): ... here. Rewrite to call them.
Doug Evans [Tue, 18 Nov 2014 16:08:00 +0000 (08:08 -0800)]
The result of symtab expansion is always a primary symtab.
gdb/ChangeLog:
* dwarf2read.c (dw2_instantiate_symtab): Add assert.
(dw2_lookup_symbol): Remove unnecessary test for primary symbol table.
* psymtab.c (lookup_symbol_aux_psymtabs): Ditto.
(psymtab_to_symtab): Add comment and assert.
(map_matching_symbols_psymtab): Remove unnecessary test for
non-primary symtab.
Nick Clifton [Tue, 18 Nov 2014 14:40:05 +0000 (14:40 +0000)]
More fixes for illegal memory accesses exposed by fuzzed binaries.
PR binutils/17512
* peXXIgen.c (pe_print_pdata): Fail if the section's virtual size
is larger than its real size.
(rsrc_print_section): Fix off-by-one error checking for overflow.
* pei-x86_64.c (pex64_bfd_print_pdata): Handle empty unwind
sections.
* dwarf.c (get_encoded_value): Warn and return if the encoded
value is more than 64-bits long.
(SAFE_BYTE_GET): Do not attempt to read more than 64-bits.
(process_extended_line_op): Add more range checks.
(decode_location_expression): Use the return value from
display_block. Add more range checks.
(read_debug_line_header): Add range check.
(display_debug_lines_raw): Add range checks.
(display_debug_frames): Silently skip multiple zero terminators.
Add range checks.
(process_cu_tu_index): Check for non-existant or empty sections.
Use SAFE_BYTE_GET instead of byte_get.
H.J. Lu [Tue, 18 Nov 2014 13:55:32 +0000 (05:55 -0800)]
Always run mpx3 and mpx4 tests in 64-bit
* ld-x86-64/mpx.exp: Always run mpx3 and mpx4 tests in 64-bit.
Igor Zamyatin [Tue, 18 Nov 2014 07:52:36 +0000 (10:52 +0300)]
Add -z bndplt to generate BND prefix in PLT entries
This patch adds "-z bndplt" option Linux/x86-64 linker to generate BND
prefix in PLT entries. It also updated Linux/x86-64 assembler not to
generate R_X86_64_PLT32_BND nor R_X86_64_PC32_BND relocations.
bfd/
2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com>
* elf64-x86-64.c (elf_x86_64_check_relocs): Enable MPX PLT only
for -z bndplt.
gas/
2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com>
* config/tc-i386-intel.c (i386_operator): Remove last argument
from lex_got call.
* config/tc-i386.c (reloc): Remove bnd_prefix from parameters'
list. Return always BFD_RELOC_32_PCREL.
* (output_branch): Remove condition for BFD_RELOC_X86_64_PC32_BND.
* (output_jump): Update call to reloc accordingly.
* (output_interseg_jump): Likewise.
* (output_disp): Likewise.
* (output_imm): Likewise.
* (x86_cons_fix_new): Likewise.
* (lex_got): Remove bnd_prefix from parameters' list in macro and
declarations. Don't use BFD_RELOC_X86_64_PLT32_BND.
* (x86_cons): Update call to lex_got accordingly.
* (i386_immediate): Likewise.
* (i386_displacement): Likewise.
* (md_apply_fix): Don't use BFD_RELOC_X86_64_PLT32_BND nor
BFD_RELOC_X86_64_PC32_BND.
* (tc_gen_reloc): Likewise.
include/
2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com>
* bfdlink.h (struct bfd_link_info): Add bndplt.
ld/
2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com>
* emulparams/elf_x86_64.sh (BNDPLT): Set to yes for x86_64.
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle
"-z bndplt" if BNDPLT is yes.
(gld${EMULATION_NAME}_list_options): Add "-z bndplt" entry.
* ld.texinfo: Add description for bndplt.
ld/testsuite/
2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com>
* testsuite/ld-x86-64/bnd-ifunc-1.d: Add bndplt option.
* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1.d: Likewise. Update dissassembly
sections.
* testsuite/ld-x86-64/mpx.exp: Handle mpx3 and mpx4 tests.
* testsuite/ld-x86-64/mpx1a.rd: Remove _BND from relocation name.
* testsuite/ld-x86-64/mpx1c.rd: Likewise.
* testsuite/ld-x86-64/mpx2a.rd: Likewise.
* testsuite/ld-x86-64/mpx2c.rd: Likewise.
* testsuite/ld-x86-64/mpx3.dd: New file.
* testsuite/ld-x86-64/mpx3a.s: Likewise.
* testsuite/ld-x86-64/mpx3b.s: Likewise.
* testsuite/ld-x86-64/mpx4.dd: Likewise.
* testsuite/ld-x86-64/mpx4a.s: Likewise.
* testsuite/ld-x86-64/mpx4b.s: Likewise.
Luis Machado [Tue, 18 Nov 2014 13:16:37 +0000 (11:16 -0200)]
I caught a few mingw32-specific failures for some of the gdb.reverse
tests.
FAIL: gdb.reverse/consecutive-precsave.exp: reload precord save file
FAIL: gdb.reverse/finish-precsave.exp: reload precord save file
FAIL: gdb.reverse/until-precsave.exp: reload core file
FAIL: gdb.reverse/watch-precsave.exp: reload core file
FAIL: gdb.reverse/step-precsave.exp: reload core file
FAIL: gdb.reverse/break-precsave.exp: reload precord save file
FAIL: gdb.reverse/sigall-precsave.exp: reload precord save file
They happen for two reasons.
- mingw32 does not define SIGTRAP, so upon recording a core file, the
signal information will be missing, which in turn causes GDB to not
display the stopping signal when it loads the same core file. An
earlier message warns about this:
"warning: Signal SIGTRAP does not exist on this system."
- The testcase is crafted in a way that expects a pattern of the
stopping signal message instead of a successful core file read message.
The following patch fixes this by changing the old pattern to a more
reasonable one, while still ignoring the fact that mingw32-based GDB
does not record a SIGTRAP in a core file because it does not define
it.
gdb/testsuite/
2014-11-18 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/break-precsave: Expect completion message for
core file reads.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
Jan Beulich [Tue, 18 Nov 2014 13:08:28 +0000 (14:08 +0100)]
aarch64: allow adding/removing just feature flags via .arch_extension
Rather than requiring to always also set/change the base architecture,
allow just en-/disabling of architecture extensions, matching what ARM
has.
Philipp Tomsich [Tue, 18 Nov 2014 11:24:14 +0000 (11:24 +0000)]
[AArch64] Add xgene2.
Philipp Tomsich [Tue, 18 Nov 2014 11:19:05 +0000 (11:19 +0000)]
[AArch64] Add xgene1.
The name xgene1 superceeds xgene-1. We retain support for the
original xgene-1 for compatibility but drop it from documentation.
Nick Clifton [Tue, 18 Nov 2014 10:07:11 +0000 (10:07 +0000)]
Fix memort access problems exposed by fuzzed binaries.
PR binutils/17531
* readelf.c (get_unwind_section_word): Skip reloc processing if
there are no relocs associated with the section.
(decode_tic6x_unwind_bytecode): Warn and return if the stack
pointer adjustment falls off the end of the buffer.
Alan Modra [Tue, 18 Nov 2014 00:00:47 +0000 (10:30 +1030)]
daily update
Ilya Tocar [Mon, 17 Nov 2014 12:41:32 +0000 (15:41 +0300)]
Add AVX512VBMI instructions
gas/
* config/tc-i386.c (cpu_arch): Add .avx512vbmi.
* doc/c-i386.texi: Document it.
opcodes/
* i386-dis-evex.c (evex_table): Add vpermi2b, vpermt2b, vpermb,
vpmultishiftqb.
* i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F3883, EVEX_W_0F3883_P_2.
* i386-gen.c (cpu_flag_init): Add CPU_AVX512VBMI_FLAGS.
(cpu_flags): Add CpuAVX512VBMI.
* i386-opc.h (enum): Add CpuAVX512VBMI.
(i386_cpu_flags): Add cpuavx512vbmi.
* i386-opc.tbl: Add vpmadd52luq, vpmultishiftqb, vpermb, vpermi2b,
vpermt2b.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
/gas/testsuite/
* gas/i386/i386.exp: Run new tests.
* gas/i386/avx512vbmi-intel.d: New file.
* gas/i386/avx512vbmi.d: Likewise.
* gas/i386/avx512vbmi.s: Likewise.
* gas/i386/avx512vbmi_vl-intel.d: Likewise.
* gas/i386/avx512vbmi_vl.d: Likewise.
* gas/i386/avx512vbmi_vl.s: Likewise.
* gas/i386/x86-64-avx512vbmi-intel.d: Likewise.
* gas/i386/x86-64-avx512vbmi.d: Likewise.
* gas/i386/x86-64-avx512vbmi.s: Likewise.
* gas/i386/x86-64-avx512vbmi_vl-intel.d: Likewise.
* gas/i386/x86-64-avx512vbmi_vl.d: Likewise.
* gas/i386/x86-64-avx512vbmi_vl.s: Likewise.
Ilya Tocar [Mon, 17 Nov 2014 11:57:33 +0000 (14:57 +0300)]
Add AVX512IFMA instructions
gas/
* config/tc-i386.c (cpu_arch): Add .avx512ifma.
* doc/c-i386.texi: Document it.
opcodes/
* i386-dis-evex.c (evex_table): Add vpmadd52luq, vpmadd52huq.
* i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F38B4,
PREFIX_EVEX_0F38B5.
* i386-gen.c (cpu_flag_init): Add CPU_AVX512IFMA_FLAGS.
(cpu_flags): Add CpuAVX512IFMA.
* i386-opc.h (enum): Add CpuAVX512IFMA.
(i386_cpu_flags): Add cpuavx512ifma.
* i386-opc.tbl: Add vpmadd52huq, vpmadd52luq.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
/gas/testsuite/
* gas/i386/i386.exp: Run new tests.
* gas/i386/avx512ifma-intel.d: New file.
* gas/i386/avx512ifma.d: Likewise.
* gas/i386/avx512ifma.s: Likewise.
* gas/i386/avx512ifma_vl-intel.d: Likewise.
* gas/i386/avx512ifma_vl.d: Likewise.
* gas/i386/avx512ifma_vl.s: Likewise.
* gas/i386/x86-64-avx512ifma-intel.d: Likewise.
* gas/i386/x86-64-avx512ifma.d: Likewise.
* gas/i386/x86-64-avx512ifma.s: Likewise.
* gas/i386/x86-64-avx512ifma_vl-intel.d: Likewise.
* gas/i386/x86-64-avx512ifma_vl.d: Likewise.
* gas/i386/x86-64-avx512ifma_vl.s: Likewise.
Ilya Tocar [Mon, 17 Nov 2014 11:49:47 +0000 (14:49 +0300)]
Add pcommit instruction
gas/
* config/tc-i386.c (cpu_arch): Add .pcommit.
* doc/c-i386.texi: Document it.
/opcodes
* i386-dis.c (PREFIX enum): Add PREFIX_RM_0_0FAE_REG_7.
(prefix_table): Add pcommit.
* i386-gen.c (cpu_flag_init): Add CPU_PCOMMIT_FLAGS.
(cpu_flags): Add CpuPCOMMIT.
* i386-opc.h (enum): Add CpuPCOMMIT.
(i386_cpu_flags): Add cpupcommit.
* i386-opc.tbl: Add pcommit.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
/gas/testsuite/
* gas/i386/i386.exp: Run new tests.
* gas/i386/pcommit-intel.d: New file.
* gas/i386/pcommit.d: Likewise.
* gas/i386/pcommit.s: Likewise.
* gas/i386/x86-64-pcommit-intel.d: Likewise.
* gas/i386/x86-64-pcommit.d: Likewise.
* gas/i386/x86-64-pcommit.s: Likewise.
Ilya Tocar [Mon, 17 Nov 2014 11:19:41 +0000 (14:19 +0300)]
Add clwb instruction
gas/
* config/tc-i386.c (cpu_arch): Add .clwb.
* doc/c-i386.texi: Document it.
opcodes/
* i386-dis.c (PREFIX enum): Add PREFIX_0FAE_REG_6.
(prefix_table): Add clwb.
* i386-gen.c (cpu_flag_init): Add CPU_CLWB_FLAGS.
(cpu_flags): Add CpuCLWB.
* i386-opc.h (enum): Add CpuCLWB.
(i386_cpu_flags): Add cpuclwb.
* i386-opc.tbl: Add clwb.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
gas/testsuite/
* gas/i386/i386.exp: Run new tests.
* gas/i386/clwb-intel.d: New file.
* gas/i386/clwb.d: Likewise.
* gas/i386/clwb.s: Likewise.
* gas/i386/x86-64-clwb-intel.d: Likewise.
* gas/i386/x86-64-clwb.d: Likewise.
* gas/i386/x86-64-clwb.s: Likewise.
Andreas Arnez [Fri, 14 Nov 2014 18:36:30 +0000 (18:36 +0000)]
GDB testsuite: More fixes for warnings with -std=gnu11
Fix some more C compiler warnings for missing function return types
and implicit function declarations in the GDB testsuite.
gdb/testsuite/ChangeLog:
* gdb.base/bp-permanent.c: Include unistd.h.
* gdb.python/py-framefilter-mi.c (main): Add return type.
* gdb.python/py-framefilter.c (main): Likewise.
* gdb.trace/actions-changed.c (main): Likewise.
Andreas Arnez [Fri, 14 Nov 2014 18:21:21 +0000 (18:21 +0000)]
Eliminate literal line numbers in mi-until.exp
Remove literal line numbers from the regexps in mi-until.exp. Add
appropriate eye-catchers to until.c and refer to those instead.
This change fixes the test case after having disturbed the line
numbering with the previous fix for compiler warnings with -std=gnu11.
gdb/testsuite/ChangeLog:
* gdb.mi/until.c: Add eye-catchers.
* gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal
line numbers.
Andreas Arnez [Fri, 14 Nov 2014 16:45:41 +0000 (16:45 +0000)]
Drop remaining references to removed source lines in break1.c and ur1.c
In some .exp files it was missed to remove the references to
eye-catchers like "set breakpoint 9 here" when the non-prototype
function header variants they belonged to were deleted. This patch
cleans this up.
gdb/testsuite/ChangeLog:
* gdb.base/condbreak.exp: Drop references to removed non-prototype
function header variants in break1.c.
* gdb.base/ena-dis-br.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.reverse/until-precsave.exp: Drop references to removed
non-prototype function header variants in ur1.c.
* gdb.reverse/until-reverse.exp: Likewise.
Joel Brobecker [Fri, 19 Sep 2014 22:00:07 +0000 (18:00 -0400)]
[gdbserver/lynx] spurious failure to write in inferior memory
We noticed the following error on ppc-lynx178, using just about
any program:
(gdb) tar remote mytarget:4444
Remote debugging using mytarget:4444
0x000100c8 in _start ()
(gdb) b try
Breakpoint 1 at 0x10844: file try.adb, line 11.
(gdb) cont
Continuing.
!!!-> Cannot remove breakpoints because program is no longer writable.
!!!-> Further execution is probably impossible.
Breakpoint 1, try () at try.adb:11
11 Local : Integer := 18;
And, of course, trying to continue yielded the expected outcome:
(gdb) c
Continuing.
warning: Error removing breakpoint 1
Cannot remove breakpoints because program is no longer writable.
Further execution is probably impossible.
It turns out that the problem is caused by an intentional test
against a variable with an undefined value. After GDB receives
notification of the inferior stopping, it tries to remove the
breakpoint by sending a memory-write packet ("X10844,4:9 ").
This leads us to lynx_write_memory, where it tries to split
the memory-write into chunks of 4 bytes. And, in order to handle
writes which are not aligned on word boundaries, we have the
following code:
if (skip > 0 || truncate > 0)
/* We need to read the memory at this address in order to preserve
the data that we are not overwriting. */
lynx_read_memory (addr, (unsigned char *) &buf, xfer_size);
if (errno)
return errno;
(the comment explains what the code is about).
Unfortunately, the not-so-glaring error that we've made here is
that we're checking ERRNO regardless of whether we've called
lynx_read_memory. In our case, because we are writing 4 bytes
aligned on a word boundary, we do not call lynx_read_memory and
therefore test an ERRNO with an undefined value.
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_write_memory): Put lynx_read_memory and
corresponding ERRNO check in same block.
Jan-Benedict Glaw [Mon, 17 Nov 2014 02:30:13 +0000 (03:30 +0100)]
Sync libiberty from GCC
Petr Machata [Mon, 17 Nov 2014 00:31:47 +0000 (08:31 +0800)]
dwarf.exp: In 64-bit units, emit also abbrev offset as a 64-bit field
Dwarf::tu and Dwarf::cu allow selection of units with 64-bit offsets
through an option. When selected, unit size is encoded properly, but
offset to abbreviation unit is still encoded in a 4-byte field. This
patch fixes the problem.
Reproducer:
Dwarf::assemble "blah.s" {
tu {is_64 1 version 4 addr_size 8} 0x1122334455667788 the_type {
type_unit {} { the_type: }
}
cu {is_64 1 version 4 addr_size 8} {
compile_unit {{language @DW_LANG_C}} {}
}
}
gdb/testsuite:
* lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
${_cu_offset_size} bytes abbrev offset.
Alan Modra [Mon, 17 Nov 2014 00:01:00 +0000 (10:31 +1030)]
daily update
Jan-Benedict Glaw [Sun, 16 Nov 2014 19:15:00 +0000 (20:15 +0100)]
Update config.{guess,sub} from upstream config repo
2014-11-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* config.guess: Update from upstream config repo.
* config.sub: Ditto.
Jan-Benedict Glaw [Sun, 16 Nov 2014 16:04:02 +0000 (17:04 +0100)]
Update `move-if-change' from gnulib
2014-11-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* move-if-change: Update from upstream gnulib.
Jan-Benedict Glaw [Sun, 16 Nov 2014 12:43:48 +0000 (13:43 +0100)]
Update from upstream Automake
2014-11-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* compile: Sync with upstream Automake.
* depcomp: Ditto.
* install-sh: Ditto.
* missing: Ditto.
* mkinstalldirs: Ditto.
* ylwrap: Ditto.
Doug Evans [Sat, 15 Nov 2014 18:20:21 +0000 (10:20 -0800)]
Add copyright headers.
Doug Evans [Sat, 15 Nov 2014 18:08:34 +0000 (10:08 -0800)]
PR symtab/17559
Basically the problem is that "symtab" is ambiguous.
Is it the primary symtab (where we canonically think of
blockvectors as being stored) or is it for a specific file
(where each file's line table is stored) ?
gdb_disassembly wants the symtab that contains the line table
but is instead getting the primary symtab.
gdb/ChangeLog:
PR symtab/17559
* symtab.c (find_pc_line_symtab): New function.
* symtab.h (find_pc_line_symtab): Declare.
* disasm.c (gdb_disassembly): Call find_pc_line_symtab instead of
find_pc_symtab.
* tui/tui-disasm.c (tui_set_disassem_content): Ditto.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Ditto.
* tui/tui-source.c (tui_vertical_source_scroll): Ditto.
* tui/tui-win.c (make_visible_with_new_height): Ditto.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Ditto.
(tui_display_main): Call find_pc_line_symtab instead of find_pc_line.
gdb/testsuite/ChangeLog:
PR symtab/17559
* gdb.base/line-symtabs.exp: New file.
* gdb.base/line-symtabs.c: New file.
* gdb.base/line-symtabs.h: New file.
Doug Evans [Sat, 15 Nov 2014 16:05:22 +0000 (08:05 -0800)]
expand_symtab_containing_pc: Renamed from find_pc_sect_symtab_via_partial.
This patch just renames one function.
Its only caller is in stack.c where we're printing a backtrace
with non-zero info_verbose and we want to make sure all the needed
symtabs are expanded before printing the backtrace
so that debug symbol reading messages don't pollute the backtrace.
I think the new name of the function makes clearer to the reader
what is going on.
gdb/ChangeLog:
* symtab.c (expand_symtab_containing_pc): Renamed from
find_pc_sect_symtab_via_partial. All callers updated.
Yao Qi [Sat, 15 Nov 2014 07:52:04 +0000 (15:52 +0800)]
Add missing parenthesis
One parenthesis is missing, and it causes a compilation error. This
patch is to fix it.
gdb:
2014-11-15 Yao Qi <yao@codesourcery.com>
* go32-nat.c (go32_create_inferior): Add missing parenthesis.
H.J. Lu [Thu, 13 Nov 2014 19:36:57 +0000 (11:36 -0800)]
Don't make PLT entry for R_X86_64_GOTPLT64
* x86_64.cc (Target_x86_64<size>::Scan::global): Don't make PLT
entry for R_X86_64_GOTPLT64.
(Target_x86_64<size>::Relocate::relocate): Update comments for
R_X86_64_GOTPLT64.
Joel Brobecker [Mon, 6 Oct 2014 18:50:46 +0000 (14:50 -0400)]
common-defs.h: include <stdarg.h> before <stdio.h>
When trying to build gdbserver on ppc-lynx178, the compiler reports
while trying to compile gdbserver/ax.c that vsprintf is not declared.
Looking at my C99 reference manual (a draft), I see the following
synopsis:
#include <stdarg.h>
#include <stdio.h>
int vsprintf(char * restrict s, [etc]);
Looking at stdio.h on LynxOS-178, if found where vsprintf gets
declared:
#if defined(__varargs_h) || defined(__stdarg_h) \
|| defined(_VARARGS_H) || defined(_STDARG_H)
extern int vsprintf _AP((char *, const char *, va_list));
#endif
Digging further, I noticed that common-defs.h, which is included
via server.h, includes stdarg.h after including stdio, explaining
why vsprintf does not get declared in this case.
This patch fixes the problem by including stdarg.h before stdio.h.
gdb/ChangeLog:
* common/common-defs.h: Move <stdarg.h> #include ahead of
<stdio.h> #include.
Tested on x86_64-linux.
H.J. Lu [Fri, 14 Nov 2014 16:31:37 +0000 (08:31 -0800)]
Correct x86 assembler manual
* config/tc-i386.c (cpu_arch): Re-arrange avx512* and xsave*
items.
* doc/c-i386.texi: Re-arrange avx512* and xsave*. Add
clflushopt and se1. Remove duplicated entries.
Pedro Alves [Fri, 14 Nov 2014 15:58:09 +0000 (15:58 +0000)]
handle 'iconv's that define EILSEQ to ENOENT
We're currently pulling gnulib's errno module as a dependency of some
other module. That provides an errno.h that defines EILSEQ to a
distinct value if the system's errno.h doesn't define it already.
However, GNU iconv does this:
/* Get errno declaration and values. */
#include <errno.h>
/* Some systems, like SunOS 4, don't have EILSEQ. Some systems, like BSD/OS,
have EILSEQ in a different header. On these systems, define EILSEQ
ourselves. */
#ifndef EILSEQ
#define EILSEQ @EILSEQ@
#endif
That's in:
http://git.savannah.gnu.org/cgit/libiconv.git/tree/include/iconv.h.in
The "different header" mentioned is wchar.h. This is handled in:
http://git.savannah.gnu.org/cgit/libiconv.git/tree/m4/eilseq.m4
which defines @EILSEQ@ to ENOENT if EILSEQ isn't found in either
errno.h or wchar.h.
So if iconv sets errno to EILSEQ on such system's, it's really setting
it to ENOENT. And when we check for EILSEQ, we're checking for
gnulib's value. The result is we won't detect the error correctly.
As we dropped support for both SunOS 4 or old BSD/OS, maybe we don't
need to care about the wchar.h issue anymore. Still, AFAICS, gnulib's
m4/errno_h.m4 doesn't know that EILSEQ may be defined in wchar.h, and
so on such systems, ISTM gnulib ends up defining an incompatible
EILSEQ itself, but I think that should be fixed on the gnulib side, by
making it extract the EILSEQ value out of the system's wchar.h, like
GNU iconv does.
So that leaves handling the case of gnulib making up a EILSEQ value,
which we take as meaning the system really doesn't really define it,
which will be the same systems GNU iconv sets errno to ENOENT instead
of EILSEQ.
Looking at glibc's iconv it seems that ENOENT is never used there.
It seems it's safe to always treat ENOENT the same as EILSEQ.
The current EILSEQ definition under PHONY_ICONV is obviously stale as
gnulib garantees there's always a EILSEQ defined.
Tested on x86_64 Fedora 20.
gdb/
2014-11-14 Pedro Alves <palves@redhat.com>
* charset.c [PHONY_ICONV && !EILSEQ] (EILSEQ): Don't define.
[!PHONY_ICONV] (gdb_iconv): New function.
[!PHONY_ICONV] (iconv): Redefine to gdb_iconv.
Nick Clifton [Fri, 14 Nov 2014 13:39:29 +0000 (13:39 +0000)]
Fix a null pointer dereference when reading the debug link info from a corrupt file.
PR binutils/17597
* opncls.c (bfd_get_debug_link_info): Avoid reading off the end of
the section.
(bfd_get_alt_debug_link_info): Likewise.
Marcus Shawcroft [Fri, 14 Nov 2014 12:52:17 +0000 (12:52 +0000)]
[AArch64] Enable CRC feature in GAS for cortex-a53 and cortex-a57.
Nick Clifton [Fri, 14 Nov 2014 12:30:00 +0000 (12:30 +0000)]
More fixes for invalid memory accesses triggered by corrupt binaries.
PR binutils/17512
* dwarf.c (get_encoded_value): Add an 'end' parameter. Change the
'data' parameter to a double pointer and return the updated value.
(decode_location_expression): Update call to get_encoded_value.
(frame_need_space): Handle the case where one or both of the
mallocs fails.
(read_cie): Initialise the cie pointer, even if the read fails.
(display_debug_frames): Warn if the calculated block_end is before
the start of the block. Break the loop if the CIE could not be
read. Update call to get_encoded_value. Warn if the read CFA
expressions are too big.
* ieee.c (ieee_archive_p) Skip processing if no bytes are read at
all.
(ieee_object_p): Likewise.
Yao Qi [Fri, 14 Nov 2014 00:53:09 +0000 (08:53 +0800)]
Fix dw2-ifort-parameter.exp fail with clang
The patch <https://sourceware.org/ml/gdb-patches/2014-03/msg00202.html>
fixed dw2-ifort-parameter.exp on powerpc64 by adding some labels to
get the start and end address of function func. This should also fix the
fail on thumb mode, however, this style is quite specific to gcc, and
other compiler, such as clang, may not guarantee the order of global
asms and functions. The test fails with clang:
$ make check RUNTESTFLAGS='dw2-ifort-parameter.exp CC_FOR_TARGET=clang'
(gdb) p/x param^M
No symbol "param" in current context.^M
(gdb) FAIL: gdb.dwarf2/dw2-ifort-parameter.exp: p/x param
With this patch applied, dw2-ifort-parameter.exp still passes for gcc
on arm thumb mode and popwerpc64, and it also passes for clang on
x86_linux.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm.
(func): Add label func_label.
* gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble):
Replace low_pc and high_pc with MACRO_AT_range.
Replace name, low_pc and high_pc with MACRO_AT_func.
Yao Qi [Fri, 14 Nov 2014 00:53:08 +0000 (08:53 +0800)]
Fix implptr-optimized-out.exp fail
Hi,
I see the fail in gdb.dwarf2/implptr-optimized-out.exp in thumb mode
(gdb) p p->f^M
No symbol "p" in current context.^M
(gdb) FAIL: gdb.dwarf2/implptr-optimized-out.exp: p p->f
and the crash on powerpc64
(gdb) continue^M
Continuing.^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
0x7d82100810000828 in ?? ()
The cause of both is that we incorrectly set attribute low_pc, since
main isn't resolved to function start address on these targets.
In this patch, we replace attributes name, low_pc and high_pc with
MACRO_AT_func. The fail on thumb mode is fixed, and crash on
powerpc64 is fixed too.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble):
Replace name, low_pc and high_pc with MACRO_AT_func.
Yao Qi [Fri, 14 Nov 2014 00:53:08 +0000 (08:53 +0800)]
Use Dwarf::assemble in implptr-optimized-out.exp
This patch is to use dwarf::assemble to generate debug information, and
remove implptr-optimized-out.S as a result.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to
produce debug information.
* gdb.dwarf2/implptr-optimized-out.S: Removed.
Yao Qi [Fri, 14 Nov 2014 00:53:08 +0000 (08:53 +0800)]
Get start and end address of main in dwz.exp
On arm-none-eabi target thumb mode, I see the following fail,
p the_int^M
$2 = 99^M
(gdb) FAIL: gdb.dwarf2/dwz.exp: p the_int
and on powerpc64 target, we even can't get function main from object
file,
disassemble main^M
No function contains specified address.^M
(gdb) FAIL: gdb.dwarf2/dwz.exp: disassemble main
This patch is to use MACRO_AT_func attribute to get the main's start
address and end address correctly, and also remove some code dwz.exp
getting main's length. This patch fixes fails on both thumb mode and
powerpc64 target.
PASS: gdb.dwarf2/dwz.exp: p other_int
PASS: gdb.dwarf2/dwz.exp: p the_int
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwz.exp: Remove the code to compile main.c to
object and get function length.
(Dwarf::assemble): Replace name, low_pc and high_pc attributes
with MACRO_AT_func.
(top-level): Replace gdb_compile and clean_restart with
prepare_for_testing.
* gdb.dwarf2/main.c (main): Add label main_label.
Yao Qi [Fri, 14 Nov 2014 00:53:08 +0000 (08:53 +0800)]
DW attribute macro MACRO_AT_func and MACRO_AT_range
This patch addes DW macro attributes MACRO_AT_func and MACRO_AT_range
in dwarf assembler, which emits "DW_AT_low_pc func_start addr" and
"DW_AT_high_pc func_end addr". func_start and func_end are computed
automatically by proc function_range.
These two attributes are pseudo attribute or macro attribute, which
means they are not standard dwarf attribute in dwarf spec. Then can
be substituted or expanded to standard attributes or macro attributes.
See details in the comments to them. Dwarf assembler is extended to
handle them.
Now the attributes name/low_pc/high_pc can be replaced with
MACRO_AT_func like this:
subprogram {
{name main}
{low_pc main_start addr}
{high_pc main_end addr}
}
becomes:
subprogram {
{MACRO_AT_func { main ${srcdir}/${subdir}/${srcfile} }}
}
users don't have to worry about the start and end of function main, and
they only need to add a label main_label in main.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (function_range): New procedure.
(Dwarf::_handle_macro_at_func): New procedure.
(Dwarf::_handle_macro_at_range): New procedure.
(Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
Yao Qi [Fri, 14 Nov 2014 00:53:08 +0000 (08:53 +0800)]
New proc _handle_attribute
This patch is to move some code to a new procedure _handle_attribute,
which will be used in my following patches.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
(_handle_attribute): New procedure.
Doug Evans [Fri, 14 Nov 2014 00:50:51 +0000 (16:50 -0800)]
PR symtab/17591
gdb/ChangeLog:
PR symtab/17591
* dwarf2read.c (find_slot_in_mapped_hash): Handle
"(anonymous namespace)".
Doug Evans [Thu, 13 Nov 2014 23:43:12 +0000 (15:43 -0800)]
dwarf2read.c (update_enumeration_type_from_children): Avoid infinite loop.
gdb/ChangeLog:
* dwarf2read.c (update_enumeration_type_from_children): Avoid
infinite loop.
H.J. Lu [Thu, 13 Nov 2014 20:56:18 +0000 (12:56 -0800)]
Add cast to unsigned int
* coffcode.h (coff_slurp_line_table): Add cast to unsigned int.
H.J. Lu [Thu, 13 Nov 2014 20:15:46 +0000 (12:15 -0800)]
Rename symbbol to symbol
* coffcode.h (coff_pointerize_aux_hook): Fix a typo.
H.J. Lu [Thu, 13 Nov 2014 19:26:47 +0000 (11:26 -0800)]
Mark R_X86_64_GOTPLT64 obsolete
* x86-64.h (R_X86_64_GOTPLT64): Mark it obsolete.
H.J. Lu [Thu, 13 Nov 2014 19:07:31 +0000 (11:07 -0800)]
Add assembler support for @gotplt
Obsolete R_X86_64_GOTPLT64 and treat it the same as R_X86_64_GOT64.
bfd/
PR gas/17598
* elf64-x86-64.c (elf_x86_64_check_relocs): Treat
R_X86_64_GOTPLT64 the same as R_X86_64_GOT64.
(elf_x86_64_relocate_section): Likewise.
gas/
PR gas/17598
* config/tc-i386.c (reloc): Support BFD_RELOC_X86_64_GOTPLT64.
gas/testsuite/
PR gas/17598
* gas/i386/reloc64.s: Add @gotplt check.
* gas/i386/reloc64.d: Updated.
* gas/i386/reloc64.l: Likewise.
ld/testsuite/
PR gas/17598
* ld-x86-64/x86-64.exp: Run gotplt1.
* ld-x86-64/gotplt1.d: New file.
* ld-x86-64/gotplt1.s: Likewise.
Jan Kratochvil [Thu, 13 Nov 2014 17:56:48 +0000 (18:56 +0100)]
NEWS: Fix typo.
gdb/ChangeLog
2014-11-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (maint set target-async): Fix typo.
Nick Clifton [Thu, 13 Nov 2014 17:46:11 +0000 (17:46 +0000)]
More fixes for memory access violations whilst scanning corrupt binaries.
PR binutils/17512
* config/obj-coff.c (coff_obj_symbol_new_hook): Set the is_sym
field.
* coffcode.h (coff_ptr_struct): Add is_sym field.
(coff_new_section_hook): Set the is_sym field.
(coff_pointerize_aux_hook): Check the is_sym field.
(coff_print_aux): Likewise.
(coff_compute_section_file_positions): Likewise.
(coff_write_object_contents): Likewise.
(coff_slurp_line_table): Likewise.
(coff_slurp_symbol_table): Likewise.
(CALC_ADDEND): Likewise.
* coffgen.c (coff_renumber_symbols): Likewise.
(coff_mangle_symbols): Likewise.
(coff_fix_symbol_name): Likewise.
(coff_write_symbol): Likewise.
(coff_write_alien_symbol): Likewise.
(coff_write_native_symbol): Likewise.
(coff_write_symbols): Likewise.
(coff_write_linenumbers): Likewise.
(coff_pointerize_aux): Likewise.
(coff_get_normalized_symtab): Likewise.
(coff_get_symbol_info): Likewise.
(bfd_coff_get_syment): Likewise.
(bfd_coff_get_auxent): Likewise.
(coff_print_symbol): Likewise.
(coff_find_nearest_line_with_names): Likewise.
(bfd_coff_set_symbol_class): Likewise.
(coff_make_empty_symbol): Set the is_sym field.
(coff_bfd_make_debug_symbol): Likewise.
* peicode.h (pe_ILF_make_a_symbol): Likewise.
* libcoff.h: Regenerate.
* libcoff-in.h: Regenerate.
Marcus Shawcroft [Thu, 13 Nov 2014 16:42:23 +0000 (16:42 +0000)]
[AArch64] Remove example processors from GAS.
Nick Clifton [Thu, 13 Nov 2014 10:45:50 +0000 (10:45 +0000)]
More fixes for readelf problems reading corrupt files.
PR binutils/17531
* readelf.c (process_version_sections): If the read of the version
def information fails, make sure that the external verdef data is
not used.
(get_dynamic_data): Do not attempt to allocate memory for more
dynamic data than there is in the file. If the read fails, free
the allocated buffer.
(process_symbol_table): Do not print dynamic information if we
were unable to read the dynamic symbol table.
(print_gnu_note): Do not print the note if the descsz is too
small.
Andreas Arnez [Tue, 28 Oct 2014 12:39:22 +0000 (12:39 +0000)]
GDB testsuite: Fix warnings with -std=gnu11
Since upstream GCC has changed the default C language dialect to
'gnu11', it yields multiple warnings in the GDB testsuite for missing
function return types and implicit function declarations. This patch
attempts to fix these.
gdb/testsuite/ChangeLog:
* gdb.ada/cond_lang/foo.c (callme): Add return type.
* gdb.base/call-sc.c (zed): Likewise.
* gdb.base/checkpoint.c (main): Likewise.
* gdb.base/dump.c (main): Likewise.
* gdb.base/gcore.c (main): Likewise.
* gdb.base/huge.c (main): Likewise.
* gdb.base/multi-forks.c (main): Likewise.
* gdb.base/pr10179-a.c (main): Likewise.
* gdb.base/savedregs.c (main): Likewise.
* gdb.base/sigaltstack.c (main): Likewise.
* gdb.base/siginfo.c (main): Likewise.
* gdb.base/structs.c (zed): Likewise.
* gdb.mi/mi-stack.c (callee3, callee2, callee1, main): Likewise.
* gdb.mi/mi-syn-frame.c (main): Likewise.
* gdb.mi/until.c (foo, main): Likewise.
* gdb.base/global-var-nested-by-dso.c (b_main, c_main): Declare.
* gdb.base/solib-weak.c (foo): Declare.
* gdb.base/attach-twice.c: Include stdio.h.
* gdb.base/weaklib1.c: Likewise.
* gdb.base/weaklib2.c: Likewise.
* gdb.base/catch-signal-fork.c: Include stdio.h and sys/wait.h.
* gdb.mi/mi-condbreak-call-thr-state-mt.c: Include stdio.h and
unistd.h.
* gdb.base/attach-pie-misread.c: Include stdlib.h.
* gdb.mi/mi-exit-code.c: Likewise.
* gdb.base/break-interp-lib.c: Include string.h.
* gdb.base/coremaker.c: Likewise.
* gdb.base/testenv.c: Likewise.
* gdb.python/py-finish-breakpoint.c: Likewise.
* gdb.base/inferior-died.c: Include sys/wait.h.
* gdb.base/fileio.c: Include time.h.
* gdb.base/async-shell.c: Include unistd.h.
* gdb.base/dprintf-non-stop.c: Likewise.
* gdb.base/info-os.c: Likewise.
* gdb.mi/mi-console.c: Likewise.
* gdb.mi/watch-nonstop.c: Likewise.
* gdb.python/py-events.c: Likewise.
* gdb.base/async.c (baz): Move up before its invocation.
* gdb.base/code_elim2.c (my_global_func): Likewise.
* gdb.base/skip-solib-lib.c (multiply): Likewise.
* gdb.base/advance.c (func2): Likewise.