Sonic Zhang [Mon, 22 Mar 2010 07:23:20 +0000 (03:23 -0400)]
i2c-bfin-twi: return completion in interrupt for smbus quick transfers
A smbus quick transfer has no data after the address byte.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sonic Zhang [Mon, 22 Mar 2010 07:23:19 +0000 (03:23 -0400)]
i2c-bfin-twi: remove redundant retry
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sonic Zhang [Mon, 22 Mar 2010 07:23:18 +0000 (03:23 -0400)]
i2c-bfin-twi: fix lost interrupts at high speeds
i2c event of next read/write byte may trigger before current int state
is cleared in the interrupt handler. So, this should be done at the
beginning of interrupt handler to avoid losing new i2c events.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Michael Hennerich [Mon, 22 Mar 2010 07:23:17 +0000 (03:23 -0400)]
i2c-bfin-twi: add debug output for error status
Add some debug() code to decode the error register.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Sonic Zhang [Mon, 22 Mar 2010 07:23:16 +0000 (03:23 -0400)]
i2c-bfin-twi: integrate timeout timer with completion interface
There isn't much point in managing our own custom timeout timer when the
completion interface already includes support for it. This makes the
resulting code much simpler and robust.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Fri, 2 Apr 2010 13:15:09 +0000 (14:15 +0100)]
i2c-s3c2410: Remove unconditional 1ms delay on each transfer
The S3C I2C controller indicates completion of I2C transfers before
the bus has a stop condition on it. In order to ensure that we do not
attempt to start a new transfer before the bus is idle the driver
currently inserts a 1ms delay. This is vastly larger than is generally
required and has a visible effect on performance under load, such as
when bringing up audio CODECs or reading back status information with
non-bulk I2C reads.
Replace the sleep with a spin on the IIC status register for up to 1ms.
This will busy wait but testing on my SMDK6410 system indicates that
the overwhelming majority of transactions complete on the first spin,
with maximum latencies of less than 10 spins so the absolute overhead
of busy waiting should be at worst comprable to msleep(), and the
overall system performance is dramatically improved.
The main risk is poor interaction with multimaster systems where
we may miss the bus going idle before the next transaction. Defend
against this by falling back to the original 1ms delay after 20 spins.
The overall effect in my testing is an approximately 20% improvement
in kernel startup time.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Torvalds [Wed, 19 May 2010 19:08:50 +0000 (12:08 -0700)]
Merge branch 'davinci-for-linus' of git://git./linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (48 commits)
Revert "rtc: omap: let device wakeup capability be configured from chip init logic"
DM365: Added more PINMUX configurations for AEMIF
DM365: Make CLKOUTx available
DM365: Added PINMUX definitions for GPIO30..32
Davinci: iotable based ioremap() interception
Davinci: pinmux - use ioremap()
Davinci: aintc/cpintc - use ioremap()
Davinci: psc - use ioremap()
Davinci: timer - use ioremap()
Davinci: jtag_id - use ioremap()
Davinci: da8xx: rtc - use ioremap
Davinci: gpio - use ioremap()
davinci: edma: fix coding style issue related to breaking lines
davinci: edma: use BIT() wherever possible
davinci: edma: fix coding style issue related to usage of braces
davinci: edma: use a more intuitive name for edma_info
Davinci: serial - conditional reset via pwremu
Davinci: serial - use ioremap()
Davinci: serial - remove unnecessary define
Davinci: watchdog reset separation across socs
...
Fix up trivial conflict in arch/arm/Kconfig due to removal of "select
GENERIC_TIME"
Linus Torvalds [Wed, 19 May 2010 18:49:33 +0000 (11:49 -0700)]
Merge branch 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits)
Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry
Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support
Input: s3c24xx_ts - Implement generic GPIO configuration callback
ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration
ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
ARM: S3C64XX: Add touchscreen platform device definition
ARM: SAMSUNG: Move mach/ts.h to plat/ts.h
ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
ARM: S5PC100: gpio.h cleanup
ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
ARM: S5PC100: Use common functions for gpiolib implementation
drivers: serial: S5PC100 serial driver cleanup
ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
ARM: S5PV210: Add GPIOlib support
ARM: SAMSUNGy: fix broken timer irq base
ARM: SMDK6440: Add audio devices on board
ARM: S5P6440: Add audio platform devices
...
KOSAKI Motohiro [Wed, 19 May 2010 00:37:41 +0000 (09:37 +0900)]
cpumask: fix compat getaffinity
Commit
a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which
abuses sched_getaffinity to find out NR_CPUS in order to parse
/sys/devices/system/node/node*/cpumap.
On NUMA systems with less than 32 possibly CPUs, the current
compat_sys_sched_getaffinity now returns '4' instead of the actual
NR_CPUS/8, which makes libnuma bail out when parsing the cpumap.
The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean
the libnuma expect the return value of sched_getaffinity() is either len
argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids.
Strictly speaking, userland requirement are
1) Glibc assume the return value mean the lengh of initialized
of mask argument. E.g. if sched_getaffinity(1024) return 128,
glibc make zero fill rest 896 byte.
2) Libnuma assume the return value can be used to guess NR_CPUS
in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But
it try len=4096 at first and 4096 is always bigger than
NR_CPUS. Then, if we remove strange min_length normalization,
we never hit -EINVAL case.
sched_getaffinity() already solved this issue. This patch adapts
compat_sys_sched_getaffinity() to match the non-compat case.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Ken Werner <ken.werner@web.de>
Cc: stable@kernel.org
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 19 May 2010 18:41:52 +0000 (11:41 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Drop duplicated "config IOMMU_HELPER"
[IA64] invoke oom-killer from page fault
[IA64] use __ratelimit
[IA64] Use set_cpus_allowed_ptr
[IA64] Use set_cpus_allowed_ptr
[IA64] arch/ia64/hp/common/sba_iommu.c: Rename dev_info to adi
[IA64] removing redundant ifdef
Linus Torvalds [Wed, 19 May 2010 18:37:22 +0000 (11:37 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits)
ARM: remove 'select GENERIC_TIME'
ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO
ARM: 6074/1: oprofile: convert from sysdev to platform device
ARM: 6073/1: oprofile: remove old files and update KConfig
ARM: 6072/1: oprofile: use perf-events framework as backend
ARM: 6071/1: perf-events: allow modules to query the number of hardware counters
ARM: 6070/1: perf-events: add support for xscale PMUs
ARM: 6069/1: perf-events: use numeric ID to identify PMU
ARM: 6064/1: pmu: register IRQs at runtime
ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA
ARM: 6134/1: Handle instruction cache maintenance fault properly
ARM: nwfpe: allow debugging output to be configured at runtime
ARM: rename mach_cpu_disable() to platform_cpu_disable()
ARM: 6132/1: PL330: Add common core driver
ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310
ARM: Move memory mapping into mmu.c
ARM: Ensure meminfo is sorted prior to sanity_check_meminfo
ARM: Remove useless linux/bootmem.h includes
ARM: convert /proc/cpu/aligment to seq_file
arm: use asm-generic/scatterlist.h
...
Kevin Hilman [Wed, 19 May 2010 18:37:20 +0000 (11:37 -0700)]
Revert "rtc: omap: let device wakeup capability be configured from chip init logic"
This reverts commit
9c0a342c45b2d98209ac473ea7a429ddd5c1b473 because
it was included without proper signoffs from RTC maintainers.
Linus Torvalds [Wed, 19 May 2010 18:36:03 +0000 (11:36 -0700)]
Merge git://git./linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (127 commits)
sh: update defconfigs.
sh: Fix up the NUMA build for recent LMB changes.
sh64: provide a stub per_cpu_trap_init() definition.
sh: fix up CONFIG_KEXEC=n build.
sh: fixup the docbook paths for clock framework shuffling.
driver core: Early dev_name() depends on slab_is_available().
sh: simplify WARN usage in SH clock driver
sh: Check return value of clk_get on ms7724
sh: Check return value of clk_get on ecovec24
sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c
sh: move sh clock.c contents to drivers/sh/clk.
sh: move sh asm/clock.h contents to linux/sh_clk.h V2
sh: remove unused clock lookup
sh: switch boards to clkdev
sh: switch sh4-202 to clkdev
sh: switch shx3 to clkdev
sh: switch sh7757 to clkdev
sh: switch sh7763 to clkdev
sh: switch sh7780 to clkdev
sh: switch sh7786 to clkdev
...
Linus Torvalds [Wed, 19 May 2010 18:35:30 +0000 (11:35 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (24 commits)
[S390] drivers/s390/char: Use kmemdup
[S390] drivers/s390/char: Use kstrdup
[S390] debug: enable exception-trace debug facility
[S390] s390_hypfs: Add new attributes
[S390] qdio: remove API wrappers
[S390] qdio: set correct bit in dsci
[S390] qdio: dont convert timestamps to microseconds
[S390] qdio: remove memset hack
[S390] qdio: prevent starvation on PCI devices
[S390] qdio: count number of qdio interrupts
[S390] user space fault: report fault before calling do_exit
[S390] topology: expose core identifier
[S390] dasd: remove uid from devmap
[S390] dasd: add dynamic pav toleration
[S390] vdso: add missing vdso_install target
[S390] vdso: remove redundant check for CONFIG_64BIT
[S390] avoid default_llseek in s390 drivers
[S390] vmcp: disallow modular build
[S390] add breaking event address for user space
[S390] virtualization aware cpu measurement
...
Ben Dooks [Wed, 19 May 2010 05:45:01 +0000 (14:45 +0900)]
Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry
Make the driver depend on either ARCH_S3C2410 (as legacy) or the new
device selection of SAMSUNG_DEV_TS.
Change the menuconfig name to reflect this driver is now handling more
devices that just the s3c2410.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Naveen Krishna [Tue, 18 May 2010 11:44:45 +0000 (20:44 +0900)]
Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support
This patch adds a feature bit field in the touchscreen driver for Samsung SoCs.
Which can be used to distinguish the TSADC module features.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: minor fix to title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Naveen Krishna [Tue, 18 May 2010 11:44:38 +0000 (20:44 +0900)]
Input: s3c24xx_ts - Implement generic GPIO configuration callback
This patch implements generic GPIO configuration function in Samsung
touchscreen driver. And makes the touchscreen driver s3c24xx-ts.c
generic to all the Samsung SoCs.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: fixed title ]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Ben Dooks [Wed, 19 May 2010 05:36:28 +0000 (14:36 +0900)]
ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration
Move the arch/arm/mach-s3c64xx/dev-ts.c file to arch/arm/plat-samsung and
rename the Kconfig entry appropriately.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Naveen Krishna [Tue, 18 May 2010 11:44:27 +0000 (20:44 +0900)]
ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
This patch implements cfg_gpio function for Samsung touchscreen.
And also modifies the H1940 machine respectively.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Tue, 4 May 2010 11:12:44 +0000 (13:12 +0200)]
ARM: S3C64XX: Add touchscreen platform device definition
This patch adds the touchscreen platform device definition for S3C64XX boards.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Tue, 4 May 2010 11:12:41 +0000 (13:12 +0200)]
ARM: SAMSUNG: Move mach/ts.h to plat/ts.h
This moves mach-s3c2410/include/mach/ts.h to plat-samsung/include/plat/ts.h in
order to prepare for s3c64xx support in the touchscreen driver.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:44 +0000 (12:38 +0200)]
ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
Move i2c helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:43 +0000 (12:38 +0200)]
ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:42 +0000 (12:38 +0200)]
ARM: S5PC100: gpio.h cleanup
This patch renames gpio related registers from s5pc1xx to s5pc100 to
better match the plat-s5p framework style. GPIO_MP* defines now used
anywhere thus has been removed.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:41 +0000 (12:38 +0200)]
ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
Move gpio-lib support from plat-s5pc1xx to mach-s5pc100. Only basic gpio
functionality is now supported. Gpio interrupts are disabled temporarly
and will be added later.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:40 +0000 (12:38 +0200)]
ARM: S5PC100: Use common functions for gpiolib implementation
GPIOlib helpers from plat-samsung already have functions for accessing
4bit gpio banks. This patch removes the duplicated functions from
plat-s5pc1xx/gpiolib.c.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:39 +0000 (12:38 +0200)]
drivers: serial: S5PC100 serial driver cleanup
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as
S3C6400/S3C6410/S5P6440.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Fri, 14 May 2010 07:27:28 +0000 (16:27 +0900)]
ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p
movement. The patches that perform the movement of the code from
plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the
build for the mach-s5pc100/clock.c code.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:23:35 +0000 (12:23 +0200)]
ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:23:36 +0000 (12:23 +0200)]
ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Wed, 19 May 2010 09:07:25 +0000 (18:07 +0900)]
ARM: Merge for-2635/samsung-rtc
Merge branch 'for-2635/samsung-rtc' into for-linus/samsung2
Conflicts:
arch/arm/mach-s3c64xx/include/mach/map.h
arch/arm/plat-samsung/Kconfig
arch/arm/plat-samsung/Makefile
Ben Dooks [Wed, 19 May 2010 09:05:42 +0000 (18:05 +0900)]
ARM: Merge for-2635/samsung-ts
Merge branch 'for-2635/samsung-ts' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:05:33 +0000 (18:05 +0900)]
ARM: Merge for-2635/s5p-audio
Merge branch 'for-2635/s5p-audio' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:05:15 +0000 (18:05 +0900)]
ARM: Merge for-2635/s5p-dma
Merge branch 'for-2635/s5p-dma' into for-linus/samsung2
Conflicts:
arch/arm/mach-s5pv210/Makefile
Ben Dooks [Wed, 19 May 2010 09:04:11 +0000 (18:04 +0900)]
ARM: Merge for-2635/fb-updates1
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:10 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5pv210-clock
Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:09 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5p6440-clock
Merge branch 'for-2635/s5p6440-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:09 +0000 (18:04 +0900)]
ARM: Merge for-2635/s3c6410-clock
Merge branch 'for-2635/s3c6410-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:08 +0000 (18:04 +0900)]
ARM: Merge for-2635/gpio2
Merge branch 'for-2635/gpio2' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:07 +0000 (18:04 +0900)]
ARM: Merge for-2635/rx1950
Merge branch 'for-2635/rx1950' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:06 +0000 (18:04 +0900)]
ARM: Merge for-2635/acer-n35
Merge branch 'for-2635/acer-n35' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:06 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-clock
Merge branch 'for-2635/samsung-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:05 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-hwmon
Merge branch 'for-2635/samsung-hwmon' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:04 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-dma
Merge branch 'for-2635/samsung-dma' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:03 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5p-general
Merge branch 'for-2635/s5p-general' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:03 +0000 (18:04 +0900)]
ARM: Merge for-2635/s3c24xx-general
Merge branch 'for-2635/s3c24xx-general' into for-linus/samsung2
Pannaga Bhushan [Wed, 19 May 2010 08:25:32 +0000 (17:25 +0900)]
ARM: S5PV210: Add GPIOlib support
This patch adds GPIOlib support for S5PV210.
Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Fri, 14 May 2010 06:18:52 +0000 (08:18 +0200)]
ARM: SAMSUNGy: fix broken timer irq base
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).
This fixes the commit
87aef30eb3c5dac0491c83fe3b90bc61f1df24ec
("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.")
which meant to move these into the old (and previously reserved)
ISA space.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: update description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Tony Luck [Wed, 12 May 2010 16:30:27 +0000 (09:30 -0700)]
[IA64] Drop duplicated "config IOMMU_HELPER"
One entry for this in arch/ia64/Kconfig should be enough.
Reported-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
npiggin@suse.de [Fri, 7 May 2010 21:34:33 +0000 (14:34 -0700)]
[IA64] invoke oom-killer from page fault
As explained in commit
1c0fe6e3bd, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Akinobu Mita [Sun, 28 Feb 2010 10:58:14 +0000 (19:58 +0900)]
[IA64] use __ratelimit
Replace open-coded rate limiting logic with __ratelimit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Julia Lawall [Fri, 26 Mar 2010 22:02:23 +0000 (23:02 +0100)]
[IA64] Use set_cpus_allowed_ptr
Use set_cpus_allowed_ptr rather than set_cpus_allowed.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Julia Lawall [Fri, 26 Mar 2010 22:02:47 +0000 (23:02 +0100)]
[IA64] Use set_cpus_allowed_ptr
Use set_cpus_allowed_ptr rather than set_cpus_allowed.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Joe Perches [Mon, 5 Apr 2010 19:05:31 +0000 (12:05 -0700)]
[IA64] arch/ia64/hp/common/sba_iommu.c: Rename dev_info to adi
There is a macro called dev_info that prints struct device specific
information. Having variables with the same name can be confusing and
prevents conversion of the macro to a function.
Rename the existing dev_info variables to something else in preparation
to converting the dev_info macro to a function.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Jiri Olsa [Thu, 6 May 2010 17:36:06 +0000 (19:36 +0200)]
[IA64] removing redundant ifdef
Pointless to use #ifdef CONFIG_NUMA in code that is
already inside another #ifdef CONFIG_NUMA.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Tue, 18 May 2010 16:46:35 +0000 (09:46 -0700)]
Merge branch 'x86-uv-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, UV: uv_irq.c: Fix all sparse warnings
x86, UV: Improve BAU performance and error recovery
x86, UV: Delete unneeded boot messages
x86, UV: Clean up UV headers for MMR definitions
Linus Torvalds [Tue, 18 May 2010 16:28:24 +0000 (09:28 -0700)]
Merge branch 'x86-txt-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, tboot: Add support for S3 memory integrity protection
Linus Torvalds [Tue, 18 May 2010 16:28:04 +0000 (09:28 -0700)]
Merge branch 'x86-pat-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, pat: Update the page flags for memtype atomically instead of using memtype_lock
x86, pat: In rbt_memtype_check_insert(), update new->type only if valid
x86, pat: Migrate to rbtree only backend for pat memtype management
x86, pat: Preparatory changes in pat.c for bigger rbtree change
rbtree: Add support for augmented rbtrees
Linus Torvalds [Tue, 18 May 2010 16:27:49 +0000 (09:27 -0700)]
Merge branch 'x86-mrst-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mrst: add nop functions to x86_init mpparse functions
x86, mrst, pci: return 0 for non-present pci bars
x86: Avoid check hlt for newer cpus
Linus Torvalds [Tue, 18 May 2010 16:17:50 +0000 (09:17 -0700)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-64: Combine SRAT regions when possible
Linus Torvalds [Tue, 18 May 2010 16:17:17 +0000 (09:17 -0700)]
Merge branch 'x86-microcode-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/microcode: Use nonseekable_open()
x86: Improve Intel microcode loader performance
Linus Torvalds [Tue, 18 May 2010 16:17:01 +0000 (09:17 -0700)]
Merge branch 'core-hweight-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, hweight: Use a 32-bit popcnt for __arch_hweight32()
arch, hweight: Fix compilation errors
x86: Add optimized popcnt variants
bitops: Optimize hweight() by making use of compile-time evaluation
Linus Torvalds [Tue, 18 May 2010 16:15:57 +0000 (09:15 -0700)]
Merge branch 'x86-irq-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, acpi/irq: Define gsi_end when X86_IO_APIC is undefined
x86, irq: Kill io_apic_renumber_irq
x86, acpi/irq: Handle isa irqs that are not identity mapped to gsi's.
x86, ioapic: Simplify probe_nr_irqs_gsi.
x86, ioapic: Optimize pin_2_irq
x86, ioapic: Move nr_ioapic_registers calculation to mp_register_ioapic.
x86, ioapic: In mpparse use mp_register_ioapic
x86, ioapic: Teach mp_register_ioapic to compute a global gsi_end
x86, ioapic: Fix the types of gsi values
x86, ioapic: Fix io_apic_redir_entries to return the number of entries.
x86, ioapic: Only export mp_find_ioapic and mp_find_ioapic_pin in io_apic.h
x86, acpi/irq: Generalize mp_config_acpi_legacy_irqs
x86, acpi/irq: Fix acpi_sci_ioapic_setup so it has both bus_irq and gsi
x86, acpi/irq: pci device dev->irq is an isa irq not a gsi
x86, acpi/irq: Teach acpi_get_override_irq to take a gsi not an isa_irq
x86, acpi/irq: Introduce apci_isa_irq_to_gsi
Linus Torvalds [Tue, 18 May 2010 15:58:16 +0000 (08:58 -0700)]
Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, fpu: Use static_cpu_has() to implement use_xsave()
x86: Add new static_cpu_has() function using alternatives
x86, fpu: Use the proper asm constraint in use_xsave()
x86, fpu: Unbreak FPU emulation
x86: Introduce 'struct fpu' and related API
x86: Eliminate TS_XSAVE
x86-32: Don't set ignore_fpu_irq in simd exception
x86: Merge kernel_math_error() into math_error()
x86: Merge simd_math_error() into math_error()
x86-32: Rework cache flush denied handler
Fix trivial conflict in arch/x86/kernel/process.c
Linus Torvalds [Tue, 18 May 2010 15:53:57 +0000 (08:53 -0700)]
Merge branch 'x86-doc-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-doc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, docbook: Fix errors from x86 headers merger
Linus Torvalds [Tue, 18 May 2010 15:49:13 +0000 (08:49 -0700)]
Merge branch 'x86-cpu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, hypervisor: add missing <linux/module.h>
Modify the VMware balloon driver for the new x86_hyper API
x86, hypervisor: Export the x86_hyper* symbols
x86: Clean up the hypervisor layer
x86, HyperV: fix up the license to mshyperv.c
x86: Detect running on a Microsoft HyperV system
x86, cpu: Make APERF/MPERF a normal table-driven flag
x86, k8: Fix build error when K8_NB is disabled
x86, cacheinfo: Disable index in all four subcaches
x86, cacheinfo: Make L3 cache info per node
x86, cacheinfo: Reorganize AMD L3 cache structure
x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments
x86, cacheinfo: Unify AMD L3 cache index disable checking
cpufreq: Unify sysfs attribute definition macros
powernow-k8: Fix frequency reporting
x86, cpufreq: Add APERF/MPERF support for AMD processors
x86: Unify APERF/MPERF support
powernow-k8: Add core performance boost support
x86, cpu: Add AMD core boosting feature flag to /proc/cpuinfo
Fix up trivial conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c and
drivers/cpufreq/cpufreq_ondemand.c
Linus Torvalds [Tue, 18 May 2010 15:40:21 +0000 (08:40 -0700)]
Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Clean up arch/x86/Kconfig*
x86-64: Don't export init_level4_pgt
Linus Torvalds [Tue, 18 May 2010 15:40:05 +0000 (08:40 -0700)]
Merge branch 'x86-atomic-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix LOCK_PREFIX_HERE for uniprocessor build
x86, atomic64: In selftest, distinguish x86-64 from 586+
x86-32: Fix atomic64_inc_not_zero return value convention
lib: Fix atomic64_inc_not_zero test
lib: Fix atomic64_add_unless return value convention
x86-32: Fix atomic64_add_unless return value convention
lib: Fix atomic64_add_unless test
x86: Implement atomic[64]_dec_if_positive()
lib: Only test atomic64_dec_if_positive on archs having it
x86-32: Rewrite 32-bit atomic64 functions in assembly
lib: Add self-test for atomic64_t
x86-32: Allow UP/SMP lock replacement in cmpxchg64
x86: Add support for lock prefix in alternatives
Linus Torvalds [Tue, 18 May 2010 15:35:37 +0000 (08:35 -0700)]
Merge branch 'x86-asm-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Use .cfi_sections for assembly code
x86-64: Reduce SMP locks table size
x86, asm: Introduce and use percpu_inc()
Linus Torvalds [Tue, 18 May 2010 15:35:04 +0000 (08:35 -0700)]
Merge branch 'tracing-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix "integer as NULL pointer" warning.
tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header
tracing: Make the documentation clear on trace_event boot option
ring-buffer: Wrap open-coded WARN_ONCE
tracing: Convert nop macros to static inlines
tracing: Fix sleep time function profiling
tracing: Show sample std dev in function profiling
tracing: Add documentation for trace commands mod, traceon/traceoff
ring-buffer: Make benchmark handle missed events
ring-buffer: Make non-consuming read less expensive with lots of cpus.
tracing: Add graph output support for irqsoff tracer
tracing: Have graph flags passed in to ouput functions
tracing: Add ftrace events for graph tracer
tracing: Dump either the oops's cpu source or all cpus buffers
tracing: Fix uninitialized variable of tracing/trace output
Linus Torvalds [Tue, 18 May 2010 15:27:54 +0000 (08:27 -0700)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
stop_machine: Move local variable closer to the usage site in cpu_stop_cpu_callback()
sched, wait: Use wrapper functions
sched: Remove a stale comment
ondemand: Make the iowait-is-busy time a sysfs tunable
ondemand: Solve a big performance issue by counting IOWAIT time as busy
sched: Intoduce get_cpu_iowait_time_us()
sched: Eliminate the ts->idle_lastupdate field
sched: Fold updating of the last_update_time_info into update_ts_time_stats()
sched: Update the idle statistics in get_cpu_idle_time_us()
sched: Introduce a function to update the idle statistics
sched: Add a comment to get_cpu_idle_time_us()
cpu_stop: add dummy implementation for UP
sched: Remove rq argument to the tracepoints
rcu: need barrier() in UP synchronize_sched_expedited()
sched: correctly place paranioa memory barriers in synchronize_sched_expedited()
sched: kill paranoia check in synchronize_sched_expedited()
sched: replace migration_thread with cpu_stop
stop_machine: reimplement using cpu_stop
cpu_stop: implement stop_cpu[s]()
sched: Fix select_idle_sibling() logic in select_task_rq_fair()
...
Linus Torvalds [Tue, 18 May 2010 15:19:03 +0000 (08:19 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
perf tools: Add mode to build without newt support
perf symbols: symbol inconsistency message should be done only at verbose=1
perf tui: Add explicit -lslang option
perf options: Type check all the remaining OPT_ variants
perf options: Type check OPT_BOOLEAN and fix the offenders
perf options: Check v type in OPT_U?INTEGER
perf options: Introduce OPT_UINTEGER
perf tui: Add workaround for slang < 2.1.4
perf record: Fix bug mismatch with -c option definition
perf options: Introduce OPT_U64
perf tui: Add help window to show key associations
perf tui: Make <- exit menus too
perf newt: Add single key shortcuts for zoom into DSO and threads
perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
perf newt: Fix the 'A'/'a' shortcut for annotate
perf newt: Make <- exit the ui_browser
x86, perf: P4 PMU - fix counters management logic
perf newt: Make <- zoom out filters
perf report: Report number of events, not samples
perf hist: Clarify events_stats fields usage
...
Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
Linus Torvalds [Tue, 18 May 2010 15:18:07 +0000 (08:18 -0700)]
Merge branch 'oprofile-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
oprofile/x86: make AMD IBS hotplug capable
oprofile/x86: notify cpus only when daemon is running
oprofile/x86: reordering some functions
oprofile/x86: stop disabled counters in nmi handler
oprofile/x86: protect cpu hotplug sections
oprofile/x86: remove CONFIG_SMP macros
oprofile/x86: fix uninitialized counter usage during cpu hotplug
oprofile/x86: remove duplicate IBS capability check
oprofile/x86: move IBS code
oprofile/x86: return -EBUSY if counters are already reserved
oprofile/x86: moving shutdown functions
oprofile/x86: reserve counter msrs pairwise
oprofile/x86: rework error handler in nmi_setup()
oprofile: update file list in MAINTAINERS file
oprofile: protect from not being in an IRQ context
oprofile: remove double ring buffering
ring-buffer: Add lost event count to end of sub buffer
tracing: Show the lost events in the trace_pipe output
ring-buffer: Add place holder recording of dropped events
tracing: Fix compile error in module tracepoints when MODULE_UNLOAD not set
...
Linus Torvalds [Tue, 18 May 2010 15:17:58 +0000 (08:17 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
rcu: remove all rcu head initializations, except on_stack initializations
rcu head introduce rcu head init on stack
Debugobjects transition check
rcu: fix build bug in RCU_FAST_NO_HZ builds
rcu: RCU_FAST_NO_HZ must check RCU dyntick state
rcu: make SRCU usable in modules
rcu: improve the RCU CPU-stall warning documentation
rcu: reduce the number of spurious RCU_SOFTIRQ invocations
rcu: permit discontiguous cpu_possible_mask CPU numbering
rcu: improve RCU CPU stall-warning messages
rcu: print boot-time console messages if RCU configs out of ordinary
rcu: disable CPU stall warnings upon panic
rcu: enable CPU_STALL_VERBOSE by default
rcu: slim down rcutiny by removing rcu_scheduler_active and friends
rcu: refactor RCU's context-switch handling
rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblk
rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
rcu: fix now-bogus rcu_scheduler_active comments.
rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.
rcu: ignore offline CPUs in last non-dyntick-idle CPU check
...
Linus Torvalds [Tue, 18 May 2010 15:17:35 +0000 (08:17 -0700)]
Merge branch 'core-locking-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: Reduce stack_trace usage
lockdep: No need to disable preemption in debug atomic ops
lockdep: Actually _dec_ in debug_atomic_dec
lockdep: Provide off case for redundant_hardirqs_on increment
lockdep: Simplify debug atomic ops
lockdep: Fix redundant_hardirqs_on incremented with irqs enabled
lockstat: Make lockstat counting per cpu
i8253: Convert i8253_lock to raw_spinlock
Linus Torvalds [Tue, 18 May 2010 14:22:37 +0000 (07:22 -0700)]
Merge branch 'core-iommu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/amd-iommu: Add amd_iommu=off command line option
iommu-api: Remove iommu_{un}map_range functions
x86/amd-iommu: Implement ->{un}map callbacks for iommu-api
x86/amd-iommu: Make amd_iommu_iova_to_phys aware of multiple page sizes
x86/amd-iommu: Make iommu_unmap_page and fetch_pte aware of page sizes
x86/amd-iommu: Make iommu_map_page and alloc_pte aware of page sizes
kvm: Change kvm_iommu_map_pages to map large pages
VT-d: Change {un}map_range functions to implement {un}map interface
iommu-api: Add ->{un}map callbacks to iommu_ops
iommu-api: Add iommu_map and iommu_unmap functions
iommu-api: Rename ->{un}map function pointers to ->{un}map_range
Linus Torvalds [Tue, 18 May 2010 14:20:19 +0000 (07:20 -0700)]
Merge branch 'core-debugobjects-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
debugobjects: Section mismatch cleanup
Linus Torvalds [Tue, 18 May 2010 14:18:38 +0000 (07:18 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (23 commits)
cifs: fix noserverino handling when unix extensions are enabled
cifs: don't update uniqueid in cifs_fattr_to_inode
cifs: always revalidate hardlinked inodes when using noserverino
[CIFS] drop quota operation stubs
cifs: propagate cifs_new_fileinfo() error back to the caller
cifs: add comments explaining cifs_new_fileinfo behavior
cifs: remove unused parameter from cifs_posix_open_inode_helper()
[CIFS] Remove unused cifs_oplock_cachep
cifs: have decode_negTokenInit set flags in server struct
cifs: break negotiate protocol calls out of cifs_setup_session
cifs: eliminate "first_time" parm to CIFS_SessSetup
[CIFS] Fix lease break for writes
cifs: save the dialect chosen by server
cifs: change && to ||
cifs: rename "extended_security" to "global_secflags"
cifs: move tcon find/create into separate function
cifs: move SMB session creation code into separate function
cifs: track local_nls in volume info
[CIFS] Allow null nd (as nfs server uses) on create
[CIFS] Fix losing locks during fork()
...
Jassi Brar [Tue, 18 May 2010 07:03:07 +0000 (16:03 +0900)]
ARM: SMDK6440: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:03:02 +0000 (16:03 +0900)]
ARM: S5P6440: Add audio platform devices
Define platform devices for all audio devices found on S5P6440
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:58 +0000 (16:02 +0900)]
ARM: SMDK6442: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:50 +0000 (16:02 +0900)]
ARM: S5P6442: Add audio platform devices
Define platform devices for all audio devices found on S5P6442
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:35 +0000 (16:02 +0900)]
ARM: SMDKC110: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:30 +0000 (16:02 +0900)]
ARM: SMDKV210: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:26 +0000 (16:02 +0900)]
ARM: S5PV210: Add audio platform devices
Define platform devices for all audio devices found on S5PV210
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Tue, 18 May 2010 10:07:05 +0000 (19:07 +0900)]
ARM: SAMSUNG: Fix additional increment when running through gpios
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios
field and the bank-bank offset inside the loop, and also in the
for() loop with a ++.
Remove the ++, as the number is already at the next GPIO, thus
ensuring that we don't skip a gpio bank by accident.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 06:12:33 +0000 (15:12 +0900)]
ARM: S3C24XX: Add note on GPIO bank sizes
Add a table for the GPIO bank sizes for each SoC
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:53:48 +0000 (14:53 +0900)]
ARM: S3C24XX: Remove macros mapping GPIO number to base
As part of the cleanup, remove the old macros mapping GPIO numbers
to the base of the register now we have gpiolib to manage the GPIO
mappings for us.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:28:44 +0000 (14:28 +0900)]
ARM: S3C24XX: Update missed gpio calls to use gpiolib
Update a couple of S3C24XX and S3C2412 files that are still
using the GPIO number to register mapping calls to get the
s3c_gpio_chip and use the base field from that.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:13:16 +0000 (14:13 +0900)]
ARM: S3C24XX: Start cleanup of GPIO numbering
Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Wed, 12 May 2010 07:22:41 +0000 (10:22 +0300)]
ARM: S3C244X: fix gpiolib port J support
Increase GPIOs number for S3C244X, and make S3C_GPIO_END
point to BANKJ end, otherwise gpiolib refuses to register
BANKJ
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ben-linux@fluff.org: Move pm fix to new patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 3 May 2010 06:29:44 +0000 (15:29 +0900)]
ARM: SMDK2416: Add support for framebuffer device and ensure correct setup
Add support for the LCD display on the SMDJK2416, and correctly name the
framebuffer device.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 13 May 2010 05:44:50 +0000 (14:44 +0900)]
ARM: SAMSUNG: Set S3C_FB_MAX_WIN in <plat/fb.h>
Move the S3C_FB_MAX_WIN to the platform data to avoid
having to include the registers with the platform data.
Set S3C_FB_MAX_WIN to 5, which is the maximum that any
of the current hardware can do and the cost of having
it set to this for all is minimal (at least for the
platform data case), then always leave this as the maximum
for the systems supported.
Also remove the inclusion of <mach/regs-fb.h> from
the device definition in arch/arm/plat-samsung
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 10:34:25 +0000 (19:34 +0900)]
ARM: S3C2443: Fix definition of LCD clock bit
Fix the definition of the LCD clock bit, it is the TFT display
controller on bit 9, not the older STN on bit 10.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 10:08:38 +0000 (19:08 +0900)]
ARM: S3C2443: Add initial defines for framebuffer support
Add the necessary defines to get the s3c-fb device to compile for
s3c2443.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Mon, 17 May 2010 18:17:42 +0000 (20:17 +0200)]
ARM: S3C64XX: Add USB external clock definition
This adds the xusbxti clock to S3C64XX platform.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Paul Mundt [Tue, 18 May 2010 09:18:28 +0000 (18:18 +0900)]
sh: update defconfigs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Tue, 18 May 2010 09:15:44 +0000 (18:15 +0900)]
sh: Fix up the NUMA build for recent LMB changes.
Now that the node 0 initialization code has been overhauled, kill off the
now obsolete setup_memory() bits.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Jassi Brar [Tue, 18 May 2010 02:59:34 +0000 (11:59 +0900)]
S5PV210: DMA: Add platform devices for PL330 DMACs
Samsung's Soc S5PV210 has three PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the other two meant for data
transfer with peripherals.
Define and add latter two PL330 DMACs as platform devices on the
S5PV210 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 02:59:27 +0000 (11:59 +0900)]
S5P6442: DMA: Add platform devices for PL330 DMACs
Samsung's Soc S5P6442 has two PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the second is meant for data
transfer with peripherals.
Define and add the peripheral PL330 DMAC as platform device on the
S5P6442 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
projects / profile / ivi / kernel-adaptation-intel-automotive.git / log