Luca Weiss [Fri, 18 Nov 2022 09:08:16 +0000 (10:08 +0100)]
remoteproc: qcom_q6v5_pas: detach power domains on remove
[ Upstream commit
34d01df00b84127be04c914fc9f8e8be1fcdf851 ]
We need to detach from the power domains also on remove, not just on
probe fail so a subsequent probe works as expected.
Otherwise the following error appears on re-probe:
[ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc'
[ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78
[ 29.510319] Hardware name: Fairphone 4 (DT)
[ 29.538335] Call trace:
[ 29.564470] dump_backtrace.part.0+0xe0/0xf0
[ 29.592602] show_stack+0x18/0x30
[ 29.619616] dump_stack_lvl+0x64/0x80
[ 29.646834] dump_stack+0x18/0x34
[ 29.673541] sysfs_warn_dup+0x60/0x7c
[ 29.700592] sysfs_create_dir_ns+0xec/0x110
[ 29.728057] kobject_add_internal+0xb8/0x374
[ 29.755530] kobject_add+0x9c/0x104
[ 29.782072] device_add+0xbc/0x8a0
[ 29.808445] device_register+0x20/0x30
[ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190
[ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0
[ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30
[ 29.918212] adsp_probe+0x278/0x580
[ 29.944384] platform_probe+0x68/0xc0
[ 29.970603] really_probe+0xbc/0x2dc
[ 29.996662] __driver_probe_device+0x78/0xe0
[ 30.023491] device_driver_attach+0x48/0xac
[ 30.050215] bind_store+0xb8/0x114
[ 30.075957] drv_attr_store+0x24/0x3c
[ 30.101874] sysfs_kf_write+0x44/0x54
[ 30.127751] kernfs_fop_write_iter+0x120/0x1f0
[ 30.154448] vfs_write+0x1ac/0x380
[ 30.179937] ksys_write+0x70/0x104
[ 30.205274] __arm64_sys_write+0x1c/0x2c
[ 30.231060] invoke_syscall+0x48/0x114
[ 30.256594] el0_svc_common.constprop.0+0x44/0xec
[ 30.283183] do_el0_svc+0x2c/0xd0
[ 30.308320] el0_svc+0x2c/0x84
[ 30.333059] el0t_64_sync_handler+0xf4/0x120
[ 30.359001] el0t_64_sync+0x18c/0x190
[ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory.
[ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
Fixes:
17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-2-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luca Weiss [Fri, 18 Nov 2022 09:08:15 +0000 (10:08 +0100)]
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
[ Upstream commit
9a70551996e699fda262e8d54bbd41739d7aad6d ]
Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes
the subsequent probe fail.
[ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
[ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc
[ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17
[ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc
[ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17
Fix this by disabling wakeup in both cases so the driver can properly
probe on the next try.
Fixes:
a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Fixes:
dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-1-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shang XiaoJing [Fri, 25 Nov 2022 02:16:41 +0000 (10:16 +0800)]
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
[ Upstream commit
f360e2b275efbb745ba0af8b47d9ef44221be586 ]
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may
fail and return NULL. devm_ioremap() will use res->start as input, which
may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes:
0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125021641.29392-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Tue, 29 Nov 2022 10:56:50 +0000 (18:56 +0800)]
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
[ Upstream commit
e01ce676aaef3b13d02343d7e70f9637d93a3367 ]
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it.
Fixes:
027045a6e2b7 ("remoteproc: qcom: Add shutdown-ack irq")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221129105650.1539187-1-cuigaosheng1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anup Patel [Wed, 7 Dec 2022 03:46:51 +0000 (09:16 +0530)]
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
[ Upstream commit
e482d9e33d5b0f222cbef7341dcd52cead6b9edc ]
The reg_val check in kvm_riscv_vcpu_set_reg_config() should only
be done for isa config register.
Fixes:
9bfd900beeec ("RISC-V: KVM: Improve ISA extension by using a bitmap")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Golle [Fri, 2 Dec 2022 18:35:08 +0000 (19:35 +0100)]
pwm: mediatek: always use bus clock for PWM on MT7622
[ Upstream commit
aa3c668f2f98856af96e13f44da6ca4f26f0b98c ]
According to MT7622 Reference Manual for Development Board v1.0 the PWM
unit found in the MT7622 SoC also comes with the PWM_CK_26M_SEL register
at offset 0x210 just like other modern MediaTek ARM64 SoCs.
And also MT7622 sets that register to 0x00000001 on reset which is
described as 'Select 26M fix CLK as BCLK' in the datasheet.
Hence set has_ck_26m_sel to true also for MT7622 which results in the
driver writing 0 to the PWM_CK_26M_SEL register which is described as
'Select bus CLK as BCLK'.
Fixes:
0c0ead76235db0 ("pwm: mediatek: Always use bus clock")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/Y1iF2slvSblf6bYK@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
xinlei lee [Fri, 2 Dec 2022 18:35:06 +0000 (19:35 +0100)]
pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm
[ Upstream commit
0b5ef3429d8f78427558ab0dcbfd862098ba2a63 ]
In the original mtk_disp_pwm_get_state() function wrongly uses bit 0 of
CON0 to judge if the PWM is enabled.
However that is indicated by a bit (at a machine dependent position) in
the DISP_PWM_EN register. Fix this accordingly.
Fixes:
3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1666172538-11652-1-git-send-email-xinlei.lee@mediatek.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Fri, 2 Dec 2022 18:35:05 +0000 (19:35 +0100)]
pwm: sifive: Call pwm_sifive_update_clock() while mutex is held
[ Upstream commit
45558b3abb87eeb2cedb8a59cb2699c120b5102a ]
As was documented in commit
0f02f491b786 ("pwm: sifive: Reduce time the
controller lock is held") a caller of pwm_sifive_update_clock() must
hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock.
While this necessity was only documented later, the race exists since
the driver was introduced.
Fixes:
9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gunthorpe [Mon, 28 Nov 2022 14:06:28 +0000 (10:06 -0400)]
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
[ Upstream commit
ef5bb8e7a7127218f826b9ccdf7508e7a339f4c2 ]
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which
cannot possibly be correct.
UNMANAGED domains are required to start out blocking all DMAs. This seems
to be what this driver does as it allocates a first level 'dt' for the IO
page table that is 0 filled.
Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be
a mistake. Remove it.
Fixes:
4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-97f0adf27b5e+1f0-s50_identity_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Tue, 18 Oct 2022 02:42:56 +0000 (10:42 +0800)]
iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
[ Upstream commit
ef693a8440926884bfd9cc3d6d36f65719513350 ]
Fix the smatch warnings:
drivers/iommu/mtk_iommu.c:878 mtk_iommu_mm_dts_parse() error: uninitialized
symbol 'larbnode'.
If someone abuse the dtsi node(Don't follow the definition of dt-binding),
for example "mediatek,larbs" is provided as boolean property, "larb_nr"
will be zero and cause abnormal.
To fix this problem and improve the code safety, add some checking
for the invalid input from dtsi, e.g. checking the larb_nr/larbid valid
range, and avoid "mediatek,larb-id" property conflicts in the smi-larb
nodes.
Fixes:
d2e9a1102cfc ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Tue, 18 Oct 2022 02:42:55 +0000 (10:42 +0800)]
iommu/mediatek: Add error path for loop of mm_dts_parse
[ Upstream commit
26593928564cf5b576ff05d3cbd958f57c9534bb ]
The mtk_iommu_mm_dts_parse will parse the smi larbs nodes. if the i+1
larb is parsed fail, we should put_device for the i..0 larbs.
There are two places need to comment:
1) The larbid may be not linear mapping, we should loop whole
the array in the error path.
2) I move this line position: "data->larb_imu[id].dev = &plarbdev->dev;"
before "if (!plarbdev->dev.driver)", That means set
data->larb_imu[id].dev before the error path. then we don't need
"platform_device_put(plarbdev)" again in probe_defer case. All depend
on "put_device" of the error path in error cases.
Fixes:
d2e9a1102cfc ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-4-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Tue, 18 Oct 2022 02:42:54 +0000 (10:42 +0800)]
iommu/mediatek: Use component_match_add
[ Upstream commit
b5765a1b44bea9dfcae69c53ffeb4c689d0922a7 ]
In order to simplify the error patch(avoid call of_node_put), Use
component_match_add instead component_match_add_release since we are only
interested in the "device" here. Then we could always call of_node_put in
normal path.
Strictly this is not a fixes patch, but it is a prepare for adding the
error path, thus I add a Fixes tag too.
Fixes:
d2e9a1102cfc ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Tue, 18 Oct 2022 02:42:53 +0000 (10:42 +0800)]
iommu/mediatek: Add platform_device_put for recovering the device refcnt
[ Upstream commit
dcb40e9fcce9bd251eaff19f3724131db522846c ]
Add platform_device_put to match with of_find_device_by_node.
Meanwhile, I add a new variable "pcommdev" which is for smi common device.
Otherwise, "platform_device_put(plarbdev)" for smi-common dev may be not
readable. And add a checking for whether pcommdev is NULL.
Fixes:
d2e9a1102cfc ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 5 Dec 2022 08:44:27 +0000 (12:44 +0400)]
selftests/powerpc: Fix resource leaks
[ Upstream commit
8f4ab7da904ab7027ccd43ddb4f0094e932a5877 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes:
ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Wed, 30 Nov 2022 17:45:13 +0000 (23:15 +0530)]
powerpc/hv-gpci: Fix hv_gpci event list
[ Upstream commit
03f7c1d2a49acd30e38789cd809d3300721e9b0e ]
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events were deprecated for platform firmware that
supports counter_info_version 0x8 or above.
Fix the hv_gpci event list by adding a new attribute group
called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.
Fixes:
97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221130174513.87501-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Sat, 29 Oct 2022 11:16:26 +0000 (19:16 +0800)]
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
[ Upstream commit
4d0eea415216fe3791da2f65eb41399e70c7bedf ]
If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.
Fixes:
26f6cb999366 ("[POWERPC] fsl_soc: add support for fsl_spi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Sun, 27 Nov 2022 12:49:28 +0000 (22:49 +1000)]
powerpc/perf: callchain validate kernel stack pointer bounds
[ Upstream commit
32c5209214bd8d4f8c4e9d9b630ef4c671f58e79 ]
The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.
The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.
Fixes:
20002ded4d93 ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Fri, 30 Sep 2022 12:39:01 +0000 (14:39 +0200)]
powerpc: dts: turris1x.dts: Add channel labels for temperature sensor
[ Upstream commit
67bbb62f61e810734da0a1577a9802ddaed24140 ]
Channel 0 of SA56004ED chip refers to internal SA56004ED chip sensor (chip
itself is located on the board) and channel 1 of SA56004ED chip refers to
external sensor which is connected to temperature diode of the P2020 CPU.
Fixes:
54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930123901.10251-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Huafei [Sat, 26 Nov 2022 11:43:16 +0000 (19:43 +0800)]
kprobes: Fix check for probe enabled in kill_kprobe()
[ Upstream commit
0c76ef3f26d5ef2ac2c21b47e7620cff35809fbb ]
In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be
called always fails. This is because before that we set the
KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always
false.
The disarm_kprobe_ftrace() call introduced by commit:
0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
to fix the NULL pointer reference problem. When the probe is enabled, if
we do not disarm it, this problem still exists.
Fix it by putting the probe enabled check before setting the
KPROBE_FLAG_GONE flag.
Link: https://lore.kernel.org/all/20221126114316.201857-1-lihuafei1@huawei.com/
Fixes:
3031313eb3d54 ("kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nayna Jain [Sun, 6 Nov 2022 20:58:39 +0000 (15:58 -0500)]
powerpc/pseries: fix plpks_read_var() code for different consumers
[ Upstream commit
1f622f3f80cbf8999ff5955a2fcfbd801a1f32e0 ]
Even though plpks_read_var() is currently called to read variables
owned by different consumers, it internally supports only OS consumer.
Fix plpks_read_var() to handle different consumers correctly.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-7-nayna@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nayna Jain [Sun, 6 Nov 2022 20:58:36 +0000 (15:58 -0500)]
powerpc/pseries: Return -EIO instead of -EINTR for H_ABORTED error
[ Upstream commit
bb8e4c7cb759b90a04f2e94056b50288ff46a0ed ]
Some commands for eg. "cat" might continue to retry on encountering
EINTR. This is not expected for original error code H_ABORTED.
Map H_ABORTED to more relevant Linux error code EIO.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-4-nayna@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nayna Jain [Sun, 6 Nov 2022 20:58:35 +0000 (15:58 -0500)]
powerpc/pseries: Fix the H_CALL error code in PLPKS driver
[ Upstream commit
af223e1728c448073d1e12fe464bf344310edeba ]
PAPR Spec defines H_P1 actually as H_PARAMETER and maps H_ABORTED to
a different numerical value.
Fix the error codes as per PAPR Specification.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-3-nayna@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nayna Jain [Sun, 6 Nov 2022 20:58:34 +0000 (15:58 -0500)]
powerpc/pseries: fix the object owners enum value in plpks driver
[ Upstream commit
2330757e0be0acad88852e211dcd6106390a729b ]
OS_VAR_LINUX enum in PLPKS driver should be 0x02 instead of 0x01.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-2-nayna@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Mon, 17 Oct 2022 03:23:33 +0000 (11:23 +0800)]
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
[ Upstream commit
8b49670f3bb3f10cd4d5a6dca17f5a31b173ecdc ]
If remapping 'data->trig_page' fails, the 'data->eoi_mmio' need be unmapped
before returning from xive_spapr_populate_irq_data().
Fixes:
eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221017032333.1852406-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Fri, 16 Sep 2022 14:15:04 +0000 (15:15 +0100)]
powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
[ Upstream commit
1c4a4a4c8410be4a231a58b23e7a30923ff954ac ]
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes:
09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Sun, 5 Jun 2022 06:00:38 +0000 (10:00 +0400)]
cxl: Fix refcount leak in cxl_calc_capp_routing
[ Upstream commit
1d09697ff22908ae487fc8c4fbde1811732be523 ]
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.
Fixes:
f24be42aab37 ("cxl: Add psl9 specific code")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 29 Jan 2022 07:16:04 +0000 (08:16 +0100)]
powerpc/52xx: Fix a resource leak in an error handling path
[ Upstream commit
5836947613ef33d311b4eff6a32d019580a214f5 ]
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function.
Fixes:
3c9059d79f5e ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xie Shaowen [Tue, 2 Aug 2022 07:41:48 +0000 (15:41 +0800)]
macintosh/macio-adb: check the return value of ioremap()
[ Upstream commit
dbaa3105736d4d73063ea0a3b01cd7fafce924e6 ]
The function ioremap() in macio_init() can fail, so its return value
should be checked.
Fixes:
36874579dbf4c ("[PATCH] powerpc: macio-adb build fix")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802074148.3213659-1-studentxswpy@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Fri, 4 Nov 2022 03:25:51 +0000 (11:25 +0800)]
macintosh: fix possible memory leak in macio_add_one_device()
[ Upstream commit
5ca86eae55a2f006e6c1edd2029b2cacb6979515 ]
Afer commit
1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed.
Fixes:
1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221104032551.1075335-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuan Can [Mon, 21 Nov 2022 08:20:22 +0000 (08:20 +0000)]
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
[ Upstream commit
73f5fc5f884ad0c5f7d57f66303af64f9f002526 ]
The fsl_pamu_probe() returns directly when create_csd() failed, leaving
irq and memories unreleased.
Fix by jumping to error if create_csd() returns error.
Fixes:
695093e38c3e ("iommu/fsl: Freescale PAMU driver and iommu implementation.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221121082022.19091-1-yuancan@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Fri, 18 Nov 2022 09:36:04 +0000 (17:36 +0800)]
iommu/amd: Fix pci device refcount leak in ppr_notifier()
[ Upstream commit
6cf0981c2233f97d56938d9d61845383d6eb227c ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak.
Fixes:
daae2d25a477 ("iommu/amd: Don't copy GCR3 table root pointer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093604.216371-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robin Murphy [Fri, 4 Nov 2022 19:51:43 +0000 (19:51 +0000)]
iommu: Avoid races around device probe
[ Upstream commit
01657bc14a3990c665375f77978631fee77b1fce ]
We currently have 3 different ways that __iommu_probe_device() may be
called, but no real guarantee that multiple callers can't tread on each
other, especially once asynchronous driver probe gets involved. It would
likely have taken a fair bit of luck to hit this previously, but commit
57365a04c921 ("iommu: Move bus setup to IOMMU device registration") ups
the odds since now it's not just omap-iommu that may trigger multiple
bus_iommu_probe() calls in parallel if probing asynchronously.
Add a lock to ensure we can't try to double-probe a device, and also
close some possible race windows to make sure we're truly robust against
trying to double-initialise a group via two different member devices.
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Fixes:
57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Link: https://lore.kernel.org/r/1946ef9f774851732eed78760a78ec40dbc6d178.1667591503.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Sat, 29 Oct 2022 10:35:50 +0000 (18:35 +0800)]
iommu/mediatek: Check return value after calling platform_get_resource()
[ Upstream commit
73b6924cdebc899de9b719e1319aa86c6bed4acf ]
platform_get_resource() may return NULL pointer, we need check its
return value to avoid null-ptr-deref in resource_size().
Fixes:
42d57fc58aeb ("iommu/mediatek: Initialise/Remove for multi bank dev")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221029103550.3774365-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Wed, 21 Sep 2022 07:41:41 +0000 (09:41 +0200)]
rtc: pcf85063: Fix reading alarm
[ Upstream commit
a6ceee26fd5ed9b5bd37322b1ca88e4548cee4a3 ]
If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80
Fix this by masking alarm enabling and reserved bits.
Fixes:
05cb3a56ee8c ("rtc: pcf85063: add alarm support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220921074141.3903104-1-alexander.stein@ew.tq-group.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Eichenberger [Sun, 6 Nov 2022 11:59:15 +0000 (12:59 +0100)]
rtc: snvs: Allow a time difference on clock register read
[ Upstream commit
0462681e207ccc44778a77b3297af728b1cf5b9f ]
On an iMX6ULL the following message appears when a wakealarm is set:
echo 0 > /sys/class/rtc/rtc1/wakealarm
rtc rtc1: Timeout trying to get valid LPSRT Counter read
This does not always happen but is reproducible quite often (7 out of 10
times). The problem appears because the iMX6ULL is not able to read the
registers within one 32kHz clock cycle which is the base clock of the
RTC. Therefore, this patch allows a difference of up to 320 cycles
(10ms). 10ms was chosen to be big enough even on systems with less cpu
power (e.g. iMX6ULL). According to the reference manual a difference is
fine:
- If the two consecutive reads are similar, the value is correct.
The values have to be similar, not equal.
Fixes:
cd7f3a249dbe ("rtc: snvs: Add timeouts to avoid kernel lockups")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20221106115915.7930-1-francesco@dolcini.it
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Wed, 9 Nov 2022 12:15:36 +0000 (13:15 +0100)]
rtc: cmos: Disable ACPI RTC event on removal
[ Upstream commit
83ebb7b3036d151ee39a4a752018665648fc3bd4 ]
Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to
prevent it from operating on stale data in case the event triggers
after driver removal.
Fixes:
311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Wed, 9 Nov 2022 12:12:00 +0000 (13:12 +0100)]
rtc: cmos: Rename ACPI-related functions
[ Upstream commit
d13e9ad9f5146f066a5c5a1cc993d09e4fb21ead ]
The names of rtc_wake_setup() and cmos_wake_setup() don't indicate
that these functions are ACPI-related, which is the case, and the
former doesn't really reflect the role of the function.
Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(),
respectively, to address this shortcoming.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/3225614.44csPzL39Z@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of:
83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Wed, 9 Nov 2022 12:09:32 +0000 (13:09 +0100)]
rtc: cmos: Eliminate forward declarations of some functions
[ Upstream commit
dca4d3b71c8a09a16951add656711fbd6f5bfbb0 ]
Reorder the ACPI-related code before cmos_do_probe() so as to eliminate
excessive forward declarations of some functions.
While at it, for consistency, add the inline modifier to the
definitions of empty stub static funtions and remove it from the
corresponding definitions of functions with non-empty bodies.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/13157911.uLZWGnKmhe@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of:
83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Wed, 9 Nov 2022 12:09:07 +0000 (13:09 +0100)]
rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
[ Upstream commit
375bbba09692fe4c5218eddee8e312dd733fa846 ]
To reduce code duplication, move the invocation of rtc_wake_setup()
into cmos_do_probe() and simplify the callers of the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2143522.irdbgypaU6@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of:
83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Wed, 9 Nov 2022 12:07:08 +0000 (13:07 +0100)]
rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
[ Upstream commit
508ccdfb86b21da37ad091003a4d4567709d5dfb ]
Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it
can operate on the cmos_rtc variable directly, so it need not set the
platform_data pointer before cmos_do_probe() is called. Instead, it
can be called by cmos_do_probe() in the case when the platform_data
pointer is not set to implement the default behavior (which is to use
the FADT information as long as ACPI support is enabled).
Modify the code accordingly.
While at it, drop a comment that doesn't really match the code it is
supposed to be describing.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/4803444.31r3eYUQgx@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of:
83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Fri, 21 Oct 2022 13:07:03 +0000 (15:07 +0200)]
rtc: pcf2127: Convert to .probe_new()
[ Upstream commit
5418e595f30bf4fde83ebb0121417c0c95cff98e ]
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe(). The device_id array has to move up for that
to work.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221021130706.178687-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of:
83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shang XiaoJing [Thu, 10 Nov 2022 09:08:10 +0000 (17:08 +0800)]
rtc: class: Fix potential memleak in devm_rtc_allocate_device()
[ Upstream commit
60da73808298ff2cfa9f165d55eb3d7aa7078601 ]
devm_rtc_allocate_device() will alloc a rtc_device first, and then run
dev_set_name(). If dev_set_name() failed, the rtc_device will memleak.
Move devm_add_action_or_reset() in front of dev_set_name() to prevent
memleak.
unreferenced object 0xffff888110a53000 (size 2048):
comm "python3", pid 470, jiffies
4296078308 (age 58.882s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 30 a5 10 81 88 ff ff .........0......
08 30 a5 10 81 88 ff ff 00 00 00 00 00 00 00 00 .0..............
backtrace:
[<
000000004aac0364>] kmalloc_trace+0x21/0x110
[<
000000000ff02202>] devm_rtc_allocate_device+0xd4/0x400
[<
000000001bdf5639>] devm_rtc_device_register+0x1a/0x80
[<
00000000351bf81c>] rx4581_probe+0xdd/0x110 [rtc_rx4581]
[<
00000000f0eba0ae>] spi_probe+0xde/0x130
[<
00000000bff89ee8>] really_probe+0x175/0x3f0
[<
00000000128e8d84>] __driver_probe_device+0xe6/0x170
[<
00000000ee5bf913>] device_driver_attach+0x32/0x80
[<
00000000f3f28f92>] bind_store+0x10b/0x1a0
[<
000000009ff812d8>] drv_attr_store+0x49/0x70
[<
000000008139c323>] sysfs_kf_write+0x8d/0xb0
[<
00000000b6146e01>] kernfs_fop_write_iter+0x214/0x2d0
[<
00000000ecbe3895>] vfs_write+0x61a/0x7d0
[<
00000000aa2196ea>] ksys_write+0xc8/0x190
[<
0000000046a600f5>] do_syscall_64+0x37/0x90
[<
00000000541a336f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
24d23181e43d ("rtc: class: check return value when calling dev_set_name()")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110090810.11225-1-shangxiaojing@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yushan Zhou [Mon, 7 Nov 2022 09:25:44 +0000 (17:25 +0800)]
rtc: rzn1: Check return value in rzn1_rtc_probe
[ Upstream commit
9800f24f7bd5b99fb4fc4ce981427102e2e15a1c ]
The rzn1_rtc_probe() function utilizes devm_pm_runtime_enable()
but wasn't checking the return value. Fix it by adding missing
check.
Fixes:
deeb4b5393e1 ("rtc: rzn1: Add new RTC driver")
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20221107092544.3721053-1-zys.zljxml@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fenghua Yu [Fri, 11 Nov 2022 01:27:15 +0000 (17:27 -0800)]
dmaengine: idxd: Fix crc_val field for completion record
[ Upstream commit
dc901d98b1fe6e52ab81cd3e0879379168e06daa ]
The crc_val in the completion record should be 64 bits and not 32 bits.
Fixes:
4ac823e9cd85 ("dmaengine: idxd: fix delta_rec and crc size field for completion record")
Reported-by: Nirav N Shah <nirav.n.shah@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221111012715.2031481-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Abdun Nihaal [Sat, 1 Oct 2022 07:00:24 +0000 (12:30 +0530)]
fs/ntfs3: Fix slab-out-of-bounds read in ntfs_trim_fs
[ Upstream commit
557d19675a470bb0a98beccec38c5dc3735c20fa ]
Syzbot reports an out of bound access in ntfs_trim_fs.
The cause of this is using a loop termination condition that compares
window index (iw) with wnd->nbits instead of wnd->nwnd, due to which the
index used for wnd->free_bits exceeds the size of the array allocated.
Fix the loop condition.
Fixes:
3f3b442b5ad2 ("fs/ntfs3: Add bitmap")
Link: https://syzkaller.appspot.com/bug?extid=b892240eac461e488d51
Reported-by: syzbot+b892240eac461e488d51@syzkaller.appspotmail.com
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Wed, 2 Nov 2022 08:18:35 +0000 (13:48 +0530)]
phy: qcom-qmp-pcie: Fix sm8450_qmp_gen4x2_pcie_pcs_tbl[] register names
[ Upstream commit
883aebf6e1ea88145d64dcf940dbcb5181313338 ]
sm8450_qmp_gen4x2_pcie_pcs_tbl[] contains the init sequence for PCS
registers of QMP PHY v5.20. So use the v5.20 specific register names.
Only major change is the rename of PCS_EQ_CONFIG{2/3} registers to
PCS_EQ_CONFIG{4/5}.
Fixes:
2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20221102081835.41892-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Wed, 2 Nov 2022 08:18:34 +0000 (13:48 +0530)]
phy: qcom-qmp-pcie: Fix high latency with 4x2 PHY when ASPM is enabled
[ Upstream commit
9ddcd920f8edfe65c3670fbd0b49db00e1e562fe ]
The PCIe QMP 4x2 RC PHY generates high latency when ASPM is enabled. This
seem to be fixed by clearing the QPHY_V5_20_PCS_PCIE_PRESET_P10_POST
register of the pcs_misc register space.
Fixes:
2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20221102081835.41892-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 27 Sep 2022 09:22:04 +0000 (12:22 +0300)]
phy: qcom-qmp-pcie: Support SM8450 PCIe1 PHY in EP mode
[ Upstream commit
f5682f13b7ab0bbdffd11934afe4b5c011d5be74 ]
Add support for using PCIe1 (gen4x2) in EP mode on SM8450. The tables to
program are mostly common with the RC mode tables, so only register
difference are split into separate RC and EP tables.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220927092207.161501-4-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
9ddcd920f8ed ("phy: qcom-qmp-pcie: Fix high latency with 4x2 PHY when ASPM is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 27 Sep 2022 09:22:03 +0000 (12:22 +0300)]
phy: qcom-qmp-pcie: support separate tables for EP mode
[ Upstream commit
11bf53a38c82baef349b4efc6a84f069dab7085a ]
The PCIe QMP PHY requires different programming sequences when being
used for the RC (Root Complex) or for the EP (End Point) modes. Allow
selecting the submode and thus selecting a set of PHY programming
tables.
Since the RC and EP modes share common some common init sequence, the
common sequence is kept in the main table and the sequence differences
are pushed to the extra tables.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220927092207.161501-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
9ddcd920f8ed ("phy: qcom-qmp-pcie: Fix high latency with 4x2 PHY when ASPM is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Marangi [Thu, 3 Nov 2022 21:21:24 +0000 (22:21 +0100)]
phy: qcom-qmp-pcie: split pcs_misc init cfg for ipq8074 pcs table
[ Upstream commit
2584068a9ef4a7bff3b9302dd058a4c95ce68631 ]
Commit
af6643242d3a ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018
pcie gen3") reworked the pcs regs values and removed the 0x400 offset
for each pcs_misc regs.
This change caused the malfunction of ipq8074 downstream since it still
has the legacy pcs table where pcs_misc are not placed on a different
table and instead put together assuming the offset of 0x400 for the
related pcs_misc regs.
Split pcs_misc init cfg from the ipq8074 pcs init table to be handled
correctly to prepare for actual support for gen3 pcie for ipq8074.
Fixes:
af6643242d3a ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3")
Reported-by: Robert Marko <robimarko@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221103212125.17156-1-ansuelsmth@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Tue, 27 Sep 2022 09:22:02 +0000 (12:22 +0300)]
phy: qcom-qmp-pcie: split register tables into common and extra parts
[ Upstream commit
2566ad8ec418934c213cb50fd2084ffd896a2fea ]
SM8250 configuration tables are split into two parts: the common one and
the PHY-specific tables. Make this split more formal. Rather than having
a blind renamed copy of all QMP table fields, add separate struct
qmp_phy_cfg_tables and add two instances of this structure to the struct
qmp_phy_cfg. Later on this will be used to support different PHY modes
(RC vs EP).
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220927092207.161501-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
2584068a9ef4 ("phy: qcom-qmp-pcie: split pcs_misc init cfg for ipq8074 pcs table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Hunter [Fri, 28 Oct 2022 12:33:56 +0000 (13:33 +0100)]
pwm: tegra: Ensure the clock rate is not less than needed
[ Upstream commit
5eccd0d9fabc4d2ab8d2a0c056fb1d7e2ff892fc ]
When dynamically scaling the PWM clock, the function
dev_pm_opp_set_rate() may set the PWM clock to a rate that is lower than
what is required. The clock rate requested when calling
dev_pm_opp_set_rate() is the minimum clock rate that is needed to drive
the PWM to achieve the required period. Hence, if the actual clock
rate is less than the requested clock rate, then the required period
cannot be achieved and configuring the PWM fails. Fix this by
calling clk_round_rate() to check if the clock rate that will be provided
is sufficient and if not, double the required clock rate to ensure the
required period can be attained.
Fixes:
8c193f4714df ("pwm: tegra: Optimize period calculation")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Hunter [Fri, 28 Oct 2022 12:33:55 +0000 (13:33 +0100)]
pwm: tegra: Improve required rate calculation
[ Upstream commit
f271946117dde2ca8741b8138b347b2d68e6ad56 ]
For the case where dev_pm_opp_set_rate() is called to set the PWM clock
rate, the requested rate is calculated as ...
required_clk_rate = (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH;
The above calculation may lead to rounding errors because the
NSEC_PER_SEC is divided by 'period_ns' before applying the
PWM_DUTY_WIDTH multiplication factor. For example, if the period is
45334ns, the above calculation yields a rate of 5646848Hz instead of
5646976Hz. Fix this by applying the multiplication factor before
dividing and using the DIV_ROUND_UP macro which yields the expected
result of 5646976Hz.
Fixes:
1d7796bdb63a ("pwm: tegra: Support dynamic clock frequency configuration")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matt Redfearn [Tue, 27 Sep 2022 21:52:56 +0000 (14:52 -0700)]
include/uapi/linux/swab: Fix potentially missing __always_inline
[ Upstream commit
defbab270d45e32b068e7e73c3567232d745c60f ]
Commit
bc27fb68aaad ("include/uapi/linux/byteorder, swab: force inlining
of some byteswap operations") added __always_inline to swab functions
and commit
283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to
userspace headers") added a definition of __always_inline for use in
exported headers when the kernel's compiler.h is not available.
However, since swab.h does not include stddef.h, if the header soup does
not indirectly include it, the definition of __always_inline is missing,
resulting in a compilation failure, which was observed compiling the
perf tool using exported headers containing this commit:
In file included from /usr/include/linux/byteorder/little_endian.h:12:0,
from /usr/include/asm/byteorder.h:14,
from tools/include/uapi/linux/perf_event.h:20,
from perf.h:8,
from builtin-bench.c:18:
/usr/include/linux/swab.h:160:8: error: unknown type name `__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
Fix this by replacing the inclusion of linux/compiler.h with
linux/stddef.h to ensure that we pick up that definition if required,
without relying on it's indirect inclusion. compiler.h is then included
indirectly, via stddef.h.
Fixes:
283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Chen [Wed, 5 Oct 2022 21:30:18 +0000 (14:30 -0700)]
phy: usb: Fix clock imbalance for suspend/resume
[ Upstream commit
8484199c09347bdd5d81ee8a2bc530850f900797 ]
We should be disabling clocks when wake from USB is not needed. Since
this wasn't done, we had a clock imbalance since clocks were always
being enabled on resume.
Fixes:
ae532b2b7aa5 ("phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllers")
Fixes:
b0c0b66c0b43 ("phy: usb: Add support for wake and USB low power mode for 7211 S2/S5")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-7-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Justin Chen [Wed, 5 Oct 2022 21:30:17 +0000 (14:30 -0700)]
phy: usb: Use slow clock for wake enabled suspend
[ Upstream commit
700c44b508020a3ea29d297c677f8d4ab14b7e6a ]
The logic was incorrect when switching to slow clock. We want the slow
clock if wake_enabled is set.
Fixes:
ae532b2b7aa5 ("phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllers")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-6-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Al Cooper [Wed, 5 Oct 2022 21:30:14 +0000 (14:30 -0700)]
phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices
[ Upstream commit
f7fc5b7090372fc4dd7798c874635ca41b8ba733 ]
The PHY's "wakeup_count" is not incrementing when waking from
WoL. The wakeup count can be found in sysfs at:
/sys/bus/platform/devices/rdb/*.usb-phy/power/wakeup_count.
The problem is that the system wakup event handler was being passed
the wrong "device" by the PHY driver.
Fixes:
f1c0db40a3ad ("phy: usb: Add "wake on" functionality")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Fri, 28 Oct 2022 16:04:23 +0000 (18:04 +0200)]
phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset
[ Upstream commit
4c6b3af3906d0c59497d3bfb07760f3a082b4150 ]
The PCS_USB register block lives at an offset of 0x1000 from the PCS
region on SC8280XP so add the missing offset to avoid corrupting
unrelated registers on runtime suspend.
Note that the current binding is broken as it does not describe the
PCS_USB region and the PCS register size does not cover PCS_USB and the
regions in between. As Linux currently maps full pages, simply adding
the offset to driver works until the binding has been fixed.
Fixes:
c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221028160435.26948-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaochen Shen [Sat, 22 Oct 2022 07:49:49 +0000 (15:49 +0800)]
dmaengine: idxd: Make read buffer sysfs attributes invisible for Intel IAA
[ Upstream commit
9a8ddb35a9d5d3ad76784a012459b256a9d7de7e ]
In current code, the following sysfs attributes are exposed to user to
show or update the values:
max_read_buffers (max_tokens)
read_buffer_limit (token_limit)
group/read_buffers_allowed (group/tokens_allowed)
group/read_buffers_reserved (group/tokens_reserved)
group/use_read_buffer_limit (group/use_token_limit)
>From Intel IAA spec [1], Intel IAA does not support Read Buffer
allocation control. So these sysfs attributes should not be supported on
IAA device.
Fix this issue by making these sysfs attributes invisible through
is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that these
attributes are not visible when the device does not support Read Buffer
allocation control.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes:
fde212e44f45 ("dmaengine: idxd: deprecate token sysfs attributes for read buffers")
Fixes:
c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221022074949.11719-1-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Riesch [Wed, 2 Nov 2022 06:35:53 +0000 (07:35 +0100)]
iommu/rockchip: fix permission bits in page table entries v2
[ Upstream commit
7eb99841f340b80be0d0973b0deb592d75fb8928 ]
As pointed out in the corresponding downstream fix [0], the permission bits
of the page table entries are compatible between v1 and v2 of the IOMMU.
This is in contrast to the current mainline code that incorrectly assumes
that the read and write permission bits are switched. Fix the permission
bits by reusing the v1 bit defines.
[0] https://github.com/rockchip-linux/kernel/commit/
e3bc123a2260145e34b57454da3db0edd117eb8e
Fixes:
c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221102063553.2464161-1-michael.riesch@wolfvision.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Tue, 25 Oct 2022 16:54:15 +0000 (18:54 +0200)]
iommu/sun50i: Implement .iotlb_sync_map
[ Upstream commit
e563cc0c787c85a4d9def0a77078dc5d3f445e3d ]
Allocated iova ranges need to be invalidated immediately or otherwise
they might or might not work when used by master or CPU. This was
discovered when running video decoder conformity test with Cedrus. Some
videos were now and then decoded incorrectly and generated page faults.
According to vendor driver, it's enough to invalidate just start and end
TLB and PTW cache lines. Documentation says that neighbouring lines must
be invalidated too. Finally, when page fault occurs, that iova must be
invalidated the same way, according to documentation.
Fixes:
4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-6-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Tue, 25 Oct 2022 16:54:14 +0000 (18:54 +0200)]
iommu/sun50i: Fix flush size
[ Upstream commit
67a8a67f9eceb72e4c73d1d09ed9ab04f4b8e12d ]
Function sun50i_table_flush() takes number of entries as an argument,
not number of bytes. Fix that mistake in sun50i_dte_get_page_table().
Fixes:
4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-5-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Tue, 25 Oct 2022 16:54:13 +0000 (18:54 +0200)]
iommu/sun50i: Fix R/W permission check
[ Upstream commit
eac0104dc69be50bed86926d6f32e82b44f8c921 ]
Because driver has enum type permissions and iommu subsystem has bitmap
type, we have to be careful how check for combined read and write
permissions is done. In such case, we have to mask both permissions and
check that both are set at the same time.
Current code just masks both flags but doesn't check that both are set.
In short, it always sets R/W permission, regardles if requested
permissions were RO, WO or RW. Fix that.
Fixes:
4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-4-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Tue, 25 Oct 2022 16:54:12 +0000 (18:54 +0200)]
iommu/sun50i: Consider all fault sources for reset
[ Upstream commit
cef20703e2b2276aaa402ec5a65ec9a09963b83e ]
We have to reset masters for all faults - permissions, L1 fault or L2
fault. Currently it's done only for permissions. If other type of fault
happens, master is in locked up state. Fix that by really considering
all fault sources.
Fixes:
4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-3-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Tue, 25 Oct 2022 16:54:11 +0000 (18:54 +0200)]
iommu/sun50i: Fix reset release
[ Upstream commit
9ad0c1252e84dbc664f0462707182245ed603237 ]
Reset signal is asserted by writing 0 to the corresponding locations of
masters we want to reset. So in order to deassert all reset signals, we
should write 1's to all locations.
Current code writes 1's to locations of masters which were just reset
which is good. However, at the same time it also writes 0's to other
locations and thus asserts reset signals of remaining masters. Fix code
by writing all 1's when we want to deassert all reset signals.
This bug was discovered when working with Cedrus (video decoder). When
it faulted, display went blank due to reset signal assertion.
Fixes:
4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-2-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Schnelle [Tue, 25 Oct 2022 11:56:52 +0000 (13:56 +0200)]
iommu/s390: Fix duplicate domain attachments
[ Upstream commit
bf8d2dd2ed0825a58f31cc510245a1eb46f8a87e ]
Since commit
fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev
calls") we can end up with duplicates in the list of devices attached to
a domain. This is inefficient and confusing since only one domain can
actually be in control of the IOMMU translations for a device. Fix this
by detaching the device from the previous domain, if any, on attach.
Add a WARN_ON() in case we still have attached devices on freeing the
domain. While here remove the re-attach on failure dance as it was
determined to be unlikely to help and may confuse debug and recovery.
Fixes:
fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-2-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 29 Sep 2022 19:00:17 +0000 (22:00 +0300)]
phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY
[ Upstream commit
922adfd59efd337059f8445a8d8968552b06ed4e ]
According to the kernel 4.4 sources from NHSS.QSDK.9.0.2 and according
to hardware docs, the PHY registers layout used for IPQ8074 USB3 PHY is
incorrect. This platform uses offset 0x174 for the PCS_STATUS register,
0xd8 for PCS_AUTONOMOUS_MODE_CTRL, etc.
Correct the PHY registers layout.
Fixes:
94a407cc17a4 ("phy: qcom-qmp: create copies of QMP PHY driver")
Fixes:
507156f5a99f ("phy: qcom-qmp: Add USB QMP PHY support for IPQ8074")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan T<quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20220929190017.529207-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:50:02 +0000 (10:50 +0200)]
phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction
[ Upstream commit
47b009db545ae90f0b50149029a6b8137685f524 ]
Drop the start and pwrdn-ctrl abstractions which are no longer needed
since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-20-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:49:55 +0000 (10:49 +0200)]
phy: qcom-qmp-usb: clean up status polling
[ Upstream commit
f5ef85adece529a6cd1e7563081c41038923a9ed ]
Clean up the PHY status polling by dropping the configuration mask which
is no longer needed since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-13-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:12:41 +0000 (10:12 +0200)]
phy: qcom-qmp-usb: drop power-down delay config
[ Upstream commit
38cd167d1fc6b5bf038229b1fa02bb1f551a564f ]
The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).
The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).
Let's keep the delay for now, but drop the redundant delay period
configuration while increasing the unnecessarily low timer slack
somewhat.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221012081241.18273-15-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:12:40 +0000 (10:12 +0200)]
phy: qcom-qmp-usb: drop sc8280xp power-down delay
[ Upstream commit
898ab85d6b1e8f6271d180c47ef8a024dea9e357 ]
The SC8280XP PHY does not need a delay before starting the PHY (which is
what the has_pwrdn_delay config option really controls) so drop the
unnecessary delay.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012081241.18273-14-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Mon, 17 Oct 2022 06:50:11 +0000 (08:50 +0200)]
phy: qcom-qmp-usb: clean up power-down handling
[ Upstream commit
645d3d04702401e002928b934b830bd25be9e277 ]
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v3) offset during power on and power off.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:49:45 +0000 (10:49 +0200)]
phy: qcom-qmp-pcie: fix ipq6018 initialisation
[ Upstream commit
30518b19895789aa9101474af2ee0f62cd882d5e ]
The phy_status mask was never set for IPQ6018 which meant that the
driver would not wait for the PHY to be initialised during power-on and
would never detect PHY initialisation timeouts.
Fixes:
520264db3bf9 ("phy: qcom-qmp: add QMP V2 PCIe PHY support for ipq60xx")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:49:44 +0000 (10:49 +0200)]
phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation
[ Upstream commit
94b7288eadf6e2c09e6280c65a9d07cca01bf434 ]
The phy_status mask was never set for IPQ8074 (gen3) which meant that
the driver would not wait for the PHY to be initialised during power-on
and would never detect PHY initialisation timeouts.
Fixes:
334fad185415 ("phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:49:43 +0000 (10:49 +0200)]
phy: qcom-qmp-pcie: fix sc8180x initialisation
[ Upstream commit
4a9eac5ae2200f1b208dd33738777f89f93dc0fe ]
The phy_status mask was never set for SC8180X which meant that the
driver would not wait for the PHY to be initialised during power-on and
would never detect PHY initialisation timeouts.
Fixes:
f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:12:36 +0000 (10:12 +0200)]
phy: qcom-qmp-pcie: replace power-down delay
[ Upstream commit
51bd33069f80705aba5f4725287bc5688ca6d92a ]
The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).
The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).
But as the vendor kernel do have a 1 ms delay *after* starting the PHY
and before starting to poll the status it is possible that later
contributors have simply not noticed that the mainline power-down delay
is not equivalent.
As the current delay before even starting the PHY is pretty much
pointless and likely a mistake, move the delay after starting the PHY
which avoids a few iterations of polling and speeds up startup by 1 ms
(the poll loop otherwise takes about 1.8 ms).
Note that MSM8998 has never used a power-down delay so add a flag to
skip the delay in case starting the PHY is faster on MSM8998. This can
be removed after someone takes a measurement.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012081241.18273-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
4a9eac5ae220 ("phy: qcom-qmp-pcie: fix sc8180x initialisation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Wed, 12 Oct 2022 08:12:35 +0000 (10:12 +0200)]
phy: qcom-qmp-pcie: drop power-down delay config
[ Upstream commit
e71906144b432135b483e228d65be59fbb44c310 ]
The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).
The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).
Let's keep the delay for now, but drop the redundant delay period
configuration while increasing the unnecessarily low timer slack
somewhat.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221012081241.18273-9-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
4a9eac5ae220 ("phy: qcom-qmp-pcie: fix sc8180x initialisation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Tue, 18 Oct 2022 13:44:04 +0000 (21:44 +0800)]
remoteproc: core: Auto select rproc-virtio device id
[ Upstream commit
65fcf3872f83d63fb7268e05d4b02640df14126e ]
With multiple remoteproc device, there will below error:
sysfs: cannot create duplicate filename '/bus/platform/devices/rproc-virtio.0'
The rvdev_data.index is duplicate, that cause issue, so
need to use the PLATFORM_DEVID_AUTO instead. After fixing
device name it becomes something like:
/bus/platform/devices/rproc-virtio.2.auto
Fixes:
1d7b61c06dc3 ("remoteproc: virtio: Create platform device for the remoteproc_virtio")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1666100644-27010-1-git-send-email-shengjiu.wang@nxp.com
[Fixed typographical error in comment block]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Povišer [Wed, 19 Oct 2022 13:23:24 +0000 (15:23 +0200)]
dmaengine: apple-admac: Allocate cache SRAM to channels
[ Upstream commit
568aa6dd641f63166bb60d769e256789b3ac42d4 ]
There's a previously unknown part of the controller interface: We have
to assign SRAM carveouts to channels to store their in-flight samples
in. So, obtain the size of the SRAM from a read-only register and divide
it into 2K blocks for allocation to channels. The FIFO depths we
configure will always fit into 2K.
(This fixes audio artifacts during simultaneous playback/capture on
multiple channels -- which looking back is fully accounted for by having
had the caches in the DMA controller overlap in memory.)
Fixes:
b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221019132324.8585-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaochen Shen [Fri, 30 Sep 2022 20:15:28 +0000 (04:15 +0800)]
dmaengine: idxd: Make max batch size attributes in sysfs invisible for Intel IAA
[ Upstream commit
91123b37e8a99cc489d5bdcfebd1c25f29382504 ]
In current code, dev.max_batch_size and wq.max_batch_size attributes in
sysfs are exposed to user to show or update the values.
>From Intel IAA spec [1], Intel IAA does not support batch processing. So
these sysfs attributes should not be supported on IAA device.
Fix this issue by making the attributes of max_batch_size invisible in
sysfs through is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that the attributes
are not visible when the device does not support batch.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes:
e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Fixes:
c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-3-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Mon, 17 Oct 2022 06:50:13 +0000 (08:50 +0200)]
phy: qcom-qmp-pcie: drop bogus register update
[ Upstream commit
2d93887cb4bac0a36ce9e146956f631ab7994680 ]
Since commit
0d58280cf1e6 ("phy: Update PHY power control sequence") the
PHY is powered on before configuring the registers and only the MSM8996
PCIe PHY, which includes the POWER_DOWN_CONTROL register in its PCS
initialisation table, may possibly require a second update afterwards.
To make things worse, the POWER_DOWN_CONTROL register lies at a
different offset on more recent SoCs so that the second update, which
still used a hard-coded offset, would write to an unrelated register
(e.g. a revision-id register on SC8280XP).
As the MSM8996 PCIe PHY is now handled by a separate driver, simply drop
the bogus register update.
Fixes:
e4d8b05ad5f9 ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB") added support
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #RB3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-12-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Tue, 20 Sep 2022 12:11:54 +0000 (14:11 +0200)]
phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers before USB 3.0 power on
[ Upstream commit
b01d622d76134e9401970ffd3fbbb9a7051f976a ]
Turris MOX board with older ARM Trusted Firmware version v1.5 is not able
to detect any USB 3.0 device connected to USB-A port on Mox-A module after
commit
0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken
reset support"). On the other hand USB 2.0 devices connected to the same
USB-A port are working fine.
It looks as if the older firmware configures COMPHY registers for USB 3.0
somehow incompatibly for kernel driver. Experiments show that resetting
COMPHY registers via setting SFT_RST auto-clearing bit in COMPHY_SFT_RESET
register fixes this issue.
Reset the COMPHY in mvebu_a3700_comphy_usb3_power_on() function as a first
step after selecting COMPHY lane and USB 3.0 function. With this change
Turris MOX board can successfully detect USB 3.0 devices again.
Before the above mentioned commit this reset was implemented in PHY reset
method, so this is the reason why there was no issue with older firmware
version then.
Fixes:
0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220920121154.30115-1-pali@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 12 Sep 2022 15:08:51 +0000 (18:08 +0300)]
fs/ntfs3: Harden against integer overflows
[ Upstream commit
e001e60869390686809663c02bceb1d3922548fb ]
Smatch complains that the "add_bytes" is not to be trusted. Use
size_add() to prevent an integer overflow.
Fixes:
be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shigeru Yoshida [Tue, 23 Aug 2022 14:46:25 +0000 (23:46 +0900)]
fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()
[ Upstream commit
caad9dd8792a2622737b7273cb34835fd9536cd2 ]
syzbot reported UBSAN error as below:
[ 76.901829][ T6677] ================================================================================
[ 76.903908][ T6677] UBSAN: shift-out-of-bounds in fs/ntfs3/super.c:675:13
[ 76.905363][ T6677] shift exponent -247 is negative
This patch avoid this error.
Link: https://syzkaller.appspot.com/bug?id=b0299c09a14aababf0f1c862dd4ebc8ab9eb0179
Fixes:
a3b774342fa7 (fs/ntfs3: validate BOOT sectors_per_clusters)
Cc: Author: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+35b87c668935bb55e666@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 15 Dec 2022 17:03:43 +0000 (18:03 +0100)]
RDMA/siw: Fix pointer cast warning
[ Upstream commit
5244ca88671a1981ceec09c5c8809f003e6a62aa ]
The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:
drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
32 | return virt_to_page((void *)paddr);
| ^
Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.
Fixes:
0d1b756acf60 ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namhyung Kim [Mon, 12 Dec 2022 23:08:20 +0000 (15:08 -0800)]
perf stat: Do not delay the workload with --delay
[ Upstream commit
c587e77e100fa40eb6af10e00497c67acf493f33 ]
The -D/--delay option is to delay the measure after the program starts.
But the current code goes to sleep before starting the program so the
program is delayed too. This is not the intention, let's fix it.
Before:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
4,326,949,337 cycles
4.
007494118 seconds time elapsed
real 0m7.474s
user 0m0.356s
sys 0m0.120s
It ran the workload for 4 seconds and gave the 3 second delay. So it
should skip the first 3 second and measure the last 1 second only. But
as you can see, it delays 3 seconds and ran the workload after that for
4 seconds. So the total time (real) was 7 seconds.
After:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
1,063,551,013 cycles
1.
002769510 seconds time elapsed
real 0m4.484s
user 0m0.385s
sys 0m0.086s
The bug was introduced when it changed enablement of system-wide events
with a command line workload. But it should've considered the initial
delay case. The code was reworked since then (in
bb8bc52e7578) so I'm
afraid it won't be applied cleanly.
Fixes:
d0a0a511493d2695 ("perf stat: Fix forked applications enablement of counters")
Reported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20221212230820.901382-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Tue, 13 Dec 2022 13:24:07 +0000 (14:24 +0100)]
ftrace: Allow WITH_ARGS flavour of graph tracer with shadow call stack
[ Upstream commit
38792972de4294163f44d6360fd221e6f2c22a05 ]
The recent switch on arm64 from DYNAMIC_FTRACE_WITH_REGS to
DYNAMIC_FTRACE_WITH_ARGS failed to take into account that we currently
require the former in order to allow the function graph tracer to be
enabled in combination with shadow call stacks. This means that this is
no longer permitted at all, in spite of the fact that either flavour of
ftrace works perfectly fine in this combination.
So permit WITH_ARGS as well as WITH_REGS.
Fixes:
ddc9863e9e90 ("scs: Disable when function graph tracing is enabled")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20221213132407.1485025-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namhyung Kim [Thu, 8 Dec 2022 18:26:36 +0000 (10:26 -0800)]
perf off_cpu: Fix a typo in BTF tracepoint name, it should be 'btf_trace_sched_switch'
[ Upstream commit
167b266bf66c5b93171011ef9d1f09b070c2c537 ]
In BTF, tracepoint definitions have the "btf_trace_" prefix. The
off-cpu profiler needs to check the signature of the sched_switch event
using that definition. But there's a typo (s/bpf/btf/) so it failed
always.
Fixes:
b36888f71c8542cd ("perf record: Handle argument change in sched_switch")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221208182636.524139-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luca Weiss [Tue, 29 Nov 2022 21:29:01 +0000 (22:29 +0100)]
leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3}
[ Upstream commit
135780f1048b3f956f5b10bb23dec9c2d2c4ef6d ]
The current setting lives in bits 4:2 (as also defined by the mask) but
the current limit defines in the driver use bits 2:0 which should be
shifted over so they don't get masked out completely (except for 17.5mA
which became 10mA).
Now checking /sys/kernel/debug/regmap/1-0068/registers shows that the
current limit is applied correctly and doesn't take the default b000 =
42mA.
Fixes:
fa877cf1abb9 ("leds: is31fl319x: Add support for is31fl319{0,1,3} chips")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Mon, 5 Dec 2022 21:27:28 +0000 (22:27 +0100)]
gfs2: Partially revert gfs2_inode_lookup change
[ Upstream commit
88f4a9f813c549f6b8a6fbf12030949b48a4d5a4 ]
Commit
c412a97cf6c5 changed delete_work_func() to always perform an
inode lookup when gfs2_try_evict() fails. This doesn't make sense as a
gfs2_try_evict() failure indicates that the inode is likely still in
use. Revert that change.
Fixes:
c412a97cf6c5 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ruanjinjie [Mon, 5 Dec 2022 07:51:53 +0000 (15:51 +0800)]
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
[ Upstream commit
104bb8a663451404a26331263ce5b96c34504049 ]
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer.
Fixes:
3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Clark [Wed, 30 Nov 2022 16:51:58 +0000 (16:51 +0000)]
perf branch: Fix interpretation of branch records
[ Upstream commit
20ed9fa4965875fdde5bfd65d838465e38d46b22 ]
Commit
93315e46b000fc80 ("perf/core: Add speculation info to branch
entries") added a new field in between type and new_type. Perf has its
own copy of this struct so update it to match the kernel side.
This doesn't currently cause any issues because new_type is only used by
the Arm BRBE driver which isn't merged yet.
Committer notes:
Is this really an ABI? How are we supposed to deal with old perf.data
files with new tools and vice versa? :-\
Fixes:
93315e46b000fc80 ("perf/core: Add speculation info to branch entries")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20221130165158.517385-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 28 Nov 2022 09:28:48 +0000 (10:28 +0100)]
power: supply: bq25890: Ensure pump_express_work is cancelled on remove
[ Upstream commit
a7aaa80098d5b7608b2dc1e883e3c3f929415243 ]
The pump_express_work which gets queued from an external_power_changed
callback might be pending / running on remove() (or on probe failure).
Add a devm action cancelling the work, to ensure that it is cancelled.
Note the devm action is added before devm_power_supply_register(), making
it run after devm unregisters the power_supply, so that the work cannot
be queued anymore (this is also why a devm action is used for this).
Fixes:
48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Fri, 18 Nov 2022 22:44:14 +0000 (23:44 +0100)]
power: supply: bq25890: Convert to i2c's .probe_new()
[ Upstream commit
c5cddca2351b291c8787b45cd046b1dfeb86979f ]
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of:
a7aaa80098d5 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Fri, 14 Oct 2022 17:24:25 +0000 (19:24 +0200)]
power: supply: bq25890: Factor out regulator registration code
[ Upstream commit
5f5c10ecaf3fdeba9b2b0af5301977420c2c4df0 ]
Pull the regulator registration code into separate function, so it can
be extended to register more regulators later. Currently this is only
moving ifdeffery into one place and other preparatory changes. The
dev_err_probe() output string is changed to explicitly list vbus
regulator failure, so that once more regulators are registered, it
would be clear which one failed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of:
a7aaa80098d5 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiheng Lin [Mon, 28 Nov 2022 14:27:40 +0000 (22:27 +0800)]
power: supply: Fix refcount leak in rk817_charger_probe
[ Upstream commit
54c03bfd094fb74f9533a9c28250219afe182382 ]
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuan Can [Thu, 24 Nov 2022 03:19:32 +0000 (03:19 +0000)]
power: supply: ab8500: Fix error handling in ab8500_charger_init()
[ Upstream commit
c4d33381b134da188ccd1084aef21e2b8c3c422e ]
The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.
Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.
Fixes:
1c1f13a006ed ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuan Can [Thu, 24 Nov 2022 11:33:32 +0000 (11:33 +0000)]
HSI: omap_ssi_core: Fix error handling in ssi_init()
[ Upstream commit
3ffa9f713c39a213a08d9ff13ab983a8aa5d8b5d ]
The ssi_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
ssi_pdriver is not unregistered.
Fix by unregister ssi_pdriver when the last platform_driver_register()
failed.
Fixes:
0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shang XiaoJing [Thu, 17 Nov 2022 02:45:58 +0000 (10:45 +0800)]
power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe()
[ Upstream commit
97f2b4ddb0aa700d673691a7d5e44d226d22bab7 ]
cw_bat_probe() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
cw_bat_probe()
create_singlethread_workqueue() # failed, cw_bat->wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes:
b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Mon, 21 Nov 2022 01:18:31 +0000 (09:18 +0800)]
power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
[ Upstream commit
955bee204f3dd307642c101b75e370662987e735 ]
If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.
Fixes:
a3b4388ea19b ("power: supply: z2_battery: Convert to GPIO descriptors")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>