Carsten Haitzler (Rasterman) [Sun, 12 Apr 2015 02:36:28 +0000 (11:36 +0900)]
evas - gl common engine - dont complain on every surace opt fetch
this causes a complint every single frame - not a good idea.
Carsten Haitzler (Rasterman) [Sat, 11 Apr 2015 00:45:26 +0000 (09:45 +0900)]
ecore x vsync - ensure drm fb is set to close on exec - intended
@fix - minor - fixes T2138 as muc as efl can (dri card0 file)
Felipe Magno de Almeida [Fri, 10 Apr 2015 20:22:37 +0000 (17:22 -0300)]
eio-model: Fixed concurrent access to filter_cb and monitoring empty directories
Added a spinlock, since contetion should be non-existant. And removed wrong if.
Felipe Magno de Almeida [Fri, 10 Apr 2015 20:11:41 +0000 (17:11 -0300)]
eio_monitor: Removed unnecessary eio_file_direct_stat
Removed unnecessary asynchronous stat, which could make eio_monitor to
lose events between the monitor creation and stat completion.
Felipe Magno de Almeida [Fri, 10 Apr 2015 20:09:07 +0000 (17:09 -0300)]
eio-model: Fixed crash when files are created in the temporary dir
Fixed a crash when temporary files were created before the tested file, causing a dereference of a NULL pointer.
Vitalii Vorobiov [Fri, 10 Apr 2015 14:36:28 +0000 (17:36 +0300)]
Edje: Edje_Edit - new part addition should initialise threshold as -1
After adding new part all draggable fields should contain default values.
@fix
kabeer khan [Fri, 10 Apr 2015 12:38:24 +0000 (14:38 +0200)]
ecore_file tests: Added new tests in ecore_file
Summary: Signed-off-by: kabeer khan <kabeer.khan@samsung.com>
Reviewers: cedric
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2331
Cedric BAIL [Fri, 10 Apr 2015 12:00:19 +0000 (14:00 +0200)]
ecore_evas: remove unwanted binary.
This binary should have been removed before merging the branch. It did
sleep in for no good reason, removing now.
Jaehwan Kim [Fri, 10 Apr 2015 10:29:40 +0000 (19:29 +0900)]
evas_object_box: add MAGIC_CHECK when it is added.
@fix
Srivardhan Hebbar [Fri, 10 Apr 2015 09:27:17 +0000 (11:27 +0200)]
ecore_con: fix stack overflow in ecore_con_url_timer issue.
Summary:
last_ms is not needed at all. If curl_multi_timeout returns non zero, then its error, if it returns zero, then its fine. If ms is zero, then call curl_multi_perform immediately.
Signed-off-by: Srivardhan Hebbar <sri.hebbar@samsung.com>
Reviewers: cedric
Subscribers: cedric
Maniphest Tasks: T2200
Differential Revision: https://phab.enlightenment.org/D2294
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Cedric BAIL [Fri, 10 Apr 2015 09:22:33 +0000 (11:22 +0200)]
evas: _op_blend_p_dp_neon and _op_blend_pas_dp_neon miscalculation fix
Summary:
When processing random data result of this function differs from C variant in more than 50% cases.
This difference is due to alpha calculation, in C code :
alpha = 256 - (*s >> 24)
in NEON:
"vmvn.u8 q4,q0 \n\t"
// ie ~(*s>>24) === 255 - (*s>>24)
We cant just add "1" as overflow will occur in case (*s>>24) == 0 (we use only 8 bit per channel in vector registers)
So here is the solution:
copy *d right before multiplication and add it to the result of it later.
Same approach as in D455.
Reviewers: raster, cedric, stefan_schmidt
Reviewed By: cedric
Subscribers: cedric
Projects: #efl
Differential Revision: https://phab.enlightenment.org/D2308
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Conrad Meyer [Fri, 10 Apr 2015 09:15:57 +0000 (11:15 +0200)]
ecore_audio: include libgen.h on FreeBSD to define basename(3)
Summary:
Fixes warning:
lib/ecore_audio/ecore_audio_obj_out_pulse.c:275:60: warning: implicit declaration of function 'basename' is invalid in C99
[-Wimplicit-function-declaration]
class_vars.context = pa_context_new(class_vars.api, basename(argv[0]));
^
lib/ecore_audio/ecore_audio_obj_out_pulse.c:275:60: warning: incompatible integer to pointer conversion passing 'int' to parameter of
type 'const char *' [-Wint-conversion]
class_vars.context = pa_context_new(class_vars.api, basename(argv[0]));
^~~~~~~~~~~~~~~~~
/usr/local/include/pulse/context.h:174:67: note: passing argument to parameter 'name' here
pa_context *pa_context_new(pa_mainloop_api *mainloop, const char *name);
^
Test Plan: It now compiles without warning.
Projects: #efl
Differential Revision: https://phab.enlightenment.org/D2313
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Conrad Meyer [Fri, 10 Apr 2015 09:13:36 +0000 (11:13 +0200)]
autotools: use bash for gen_shaders*.sh
Summary:
Fixes src-on-NFS builds on FreeBSD, especially when the current shell is
not bash.
Test Plan:
Before:
SHADERS modules/evas/engines/gl_common/shader/evas_gl_shaders.x
gmake[4]: modules/evas/engines/gl_common/shader/gen_shaders.sh: Command not found
Makefile:34122: recipe for target 'modules/evas/engines/gl_common/shader/evas_gl_shaders.x' failed
gmake[4]: *** [modules/evas/engines/gl_common/shader/evas_gl_shaders.x] Error 127
Even manually adjusting path doesn't fix it (and the file is clearly `+x`):
$ ls -l src/modules/evas/engines/gl_common/shader/gen_shaders.sh
-rwxrwxrwx 1 1000 1000 1848 Apr 8 17:01 src/modules/evas/engines/gl_common/shader/gen_shaders.sh
$ export PATH="$PATH:$(pwd)/src"
$ modules/evas/engines/gl_common/shader/gen_shaders.sh
zsh: no such file or directory: modules/evas/engines/gl_common/shader/gen_shaders.sh
After patch:
SHADERS modules/evas/engines/gl_common/shader/evas_gl_shaders.x
CC modules/evas/engines/software_x11/modules_evas_engines_software_x11_module_la-evas_x_egl.lo
CC modules/evas/engines/software_x11/modules_evas_engines_software_x11_module_la-evas_xlib_swapbuf.lo
...
Projects: #efl
Differential Revision: https://phab.enlightenment.org/D2314
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Subhransu Mohanty [Tue, 7 Apr 2015 04:47:34 +0000 (13:47 +0900)]
ector: don't apply transformation on clips in Cairo backend.
Signed-off-by: Cedric BAIL <cedric@osg.samsung.com>
Chris Michael [Wed, 8 Apr 2015 18:37:53 +0000 (14:37 -0400)]
evas-drm: Add back in the r, g, b masks for conversion
Summary: This is a big oopsie !! Should not have been removed during
previous commit.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 18:02:57 +0000 (14:02 -0400)]
evas-drm: Remove evas_drm file from build order
Summary: The Evas Drm engine makes use of Ecore_Drm functions now so
we no longer need private versions of the same code
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 18:01:18 +0000 (14:01 -0400)]
evas-drm: Make evas drm engine use new ecore_drm functions
Summary: As we already have Ecore_Drm which handles all things drm
related, let's make use of it in the Evas Drm Engine. This modifies
the 'meat' of the Evas Drm engine to use Ecore_Drm functions rather
than keeping private versions of the same code.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:59:24 +0000 (13:59 -0400)]
evas-drm: Cleanup drm engine code
Summary: With the evas drm engine refactor, some of the fields in the
Render_Engine structure are unused so remove them.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:57:58 +0000 (13:57 -0400)]
evas-drm: Cleanup evas_engine header file
Summary: With the evas drm engine refactor, a lot of these fields in
the Outbuf structure are unused so remove them. This also removes
unused private function declarations.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:56:15 +0000 (13:56 -0400)]
evas-drm: Cleanup Engine Info structure
Summary: A few of these engine fields are no longer needed or were
unused in the Evas Drm engine so remove them.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:54:48 +0000 (13:54 -0400)]
ecore-evas-drm: Use new Ecore_Drm functions to get properties of the output
Summary: This makes use of the newly added Ecore_Drm API functions to
get information about the output so we can setup the Evas engine
properly
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:52:46 +0000 (13:52 -0400)]
ecore-drm: Change @since 1.15 to @since 1.14 for newly added APIs
Summary: As requested by stefan, change newly added APIs to be @since
1.15
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:50:50 +0000 (13:50 -0400)]
ecore-drm: Modify device pageflip function to accept ecore_drm_fb callbacks
Summary: This modifies the ecore_drm_device pageflip function to make
use of the ecore_drm_fb callbacks passed into the ecore_drm_fb_send
function
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:41:57 +0000 (13:41 -0400)]
ecore-drm: Add private structure used during pageflip calls
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 17:41:35 +0000 (13:41 -0400)]
ecore-drm: Add 2 new API functions for setting and sending framebuffers
Summary: This adds 2 new API functions we can use from within the evas
drm engine to set framebuffers as current, and to call a pageflip on
given buffers.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 15:01:52 +0000 (11:01 -0400)]
ecore-drm: Add an API function to return the connector id of an output
Summary: This adds an API function to return the connector id of a
given output.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 15:00:10 +0000 (11:00 -0400)]
ecore-drm: Whitespace removal
Summary: No functional changes, just removing whitespace
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 14:59:35 +0000 (10:59 -0400)]
ecore-drm: Add API function to return an output's crtc id
Summary: This adds an API function to return the crtc id of an output
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 14:49:46 +0000 (10:49 -0400)]
ecore-drm: Add API function to return an output crtc buffer id
Summary: This adds an API function to return an output's crtc buffer id
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 14:41:26 +0000 (10:41 -0400)]
ecore-drm: Add API function to find an output at given coordinates
Summary: This commit adds an API function that can be used to find an
output given an x/y coordinate pair.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 14:29:29 +0000 (10:29 -0400)]
ecore-drm: Move doxygen documentation to main Ecore_Drm header
Summary: This moves all doxygen to the main Ecore_Drm header to match
rest of efl.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Wed, 8 Apr 2015 14:20:07 +0000 (10:20 -0400)]
ecore-drm: Remove unused API function that should not have been committed
Summary: This API was added in the header while testing a theory, and
should not have been committed.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 19:18:30 +0000 (15:18 -0400)]
ecore-drm: Move drm headers to Ecore_Drm
Summary: Since we only create one drm context in the drm_device
structure now, we need the drm headers to be included in Ecore_Drm.h
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:30:43 +0000 (14:30 -0400)]
ecore-drm: Create drmEventContext Once during device open
Summary: This changes allows us to reuse the same drmEventContext once
so that when we get drm events, we are not constantly recreating the
drmEventContext.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:24:46 +0000 (14:24 -0400)]
ecore-drm: Skip repaints if we are VT switched away
Summary: This allows us to skip output rendering if we are VT switched
away.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:22:59 +0000 (14:22 -0400)]
ecore-drm: Update device active state on VT switch and use new output_disable function
Summary: This marks an Ecore_Drm_Device as active or not when we VT
switch. We do this so we can skip rendering if we are not active.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:21:30 +0000 (14:21 -0400)]
ecore-drm: Add API function to disable an output
Summary: This adds a new API function we can call to disable an Ecore_Drm_Output
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:10:41 +0000 (14:10 -0400)]
ecore-evas-drm: Setup Ecore_Drm_Device for software rendering
Summary: If we are using the software version of ecore_evas_drm, then
make API call to setup the Ecore_Drm_Device for software rendering.
This creates the dumb buffers on the Ecore_Drm_Device.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:07:12 +0000 (14:07 -0400)]
ecore-drm: Update drm device & output code to remove per-output dumb buffers
Summary: Since we now create the dumb buffers in the ecore_drm_device
structure, we don't need them on a per-output basis. This commit fixes
the output & device code to adjust to this.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:06:07 +0000 (14:06 -0400)]
ecore-drm: Add API to setup the drm device for software rendering
Summary: This adds an API we can call from ecore_evas to setup the
device for software rendering which will cause dumb buffers to be
created in the Ecore_Drm_Device structure.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 18:05:10 +0000 (14:05 -0400)]
ecore-drm: Remove per-output framebuffers
Summary: No real need for each output to have its own framebuffers as
we can just create dumb buffers in the drm device structure
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 17:10:35 +0000 (13:10 -0400)]
ecore-drm: Fix issue of outputs_geometry_get not skipping cloned outputs
Summary: When we make the call to outputs_geometry_get, we should NOT
include cloned outputs in the final size.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 17:03:28 +0000 (13:03 -0400)]
ecore-drm: Delay destroy of output if there is a pending flip
Summary: If an output has a pending page flip, we cannot destroy it
until the page flip has completed. This commit adds support to delay
destroying an output until the page flip is completed.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 16:41:43 +0000 (12:41 -0400)]
evas-drm: Use ecore_drm_fb_dirty function to mark framebuffer as dirty
Summary: This removes an internal evas drm engine function and instead
uses the new ecore_drm_fb_dirty function call to mark the framebuffer
as dirty
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 16:41:07 +0000 (12:41 -0400)]
ecore-drm: Add API function to mark a Framebuffer as dirty
Summary: This adds an API function used to mark a framebuffer as dirty
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 16:24:07 +0000 (12:24 -0400)]
ecore-drm: Add API function to set output gamma
Summary: This commit adds new API for setting gamma of an Ecore_Drm_Output
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 16:13:32 +0000 (12:13 -0400)]
ecore-drm: Improve drm output creation, mode detection, and cloning support
Summary: This refactors the output creation code to support better
mode detection, cloning of hotplugged outputs, and initial support for
setting of output gamma (API to follow)
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:41:21 +0000 (11:41 -0400)]
ecore-drm: Add support for DPMS on an output
Summary: This commit adds support for setting DPMS level of an output.
This adds a new API function 'ecore_drm_output_dpms_set' to set the
level.
@feature
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Jean-Philippe Andre [Fri, 10 Apr 2015 07:18:54 +0000 (16:18 +0900)]
Evas image: Return proper path even with mmap
Since we're using a union (u.{f,file} we can't just
return u.file when the file was set as an mmap source.
@fix
Dongyeon Kim [Fri, 10 Apr 2015 07:13:31 +0000 (16:13 +0900)]
Evas GL: Add missing dlopen for GLX 1.x version
Summary:
For GLX backend, we should dlopen libGL.so*
@fix
Test Plan: Evas GL 1.x test cases
Reviewers: cedric, jpeg
Reviewed By: jpeg
Subscribers: mythri, mer.kim, wonsik, cedric
Differential Revision: https://phab.enlightenment.org/D2322
Dongyeon Kim [Fri, 10 Apr 2015 07:13:22 +0000 (16:13 +0900)]
Evas GL: remove direct surfaces hash
Summary:
Evas GL surface buffers are allocated at make current time now
rather than surface creation time, and since we pass evas gl surface handle
to the backend, we do not need direct surfaces hash anymore.
Test Plan: elementary test and evas gl test cases
Reviewers: cedric, jpeg
Reviewed By: jpeg
Subscribers: cedric, mythri, mer.kim, wonsik
Differential Revision: https://phab.enlightenment.org/D2320
Dongyeon Kim [Fri, 10 Apr 2015 07:13:04 +0000 (16:13 +0900)]
Evas GL: reset current surface to NULL when it is destroyed
Summary:
Hopefully this will fix some of the multiple windows issues for elm glview but not all.
@fix
Test Plan: elementary glview tests
Reviewers: cedric, jpeg
Reviewed By: jpeg
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2317
Oleksandr Shcherbina [Fri, 10 Apr 2015 05:26:55 +0000 (14:26 +0900)]
[evas/evas_3D] Uninitialized component of vector gl_FragColor in shadow_map shader
Summary:
@fix
During execution example evas-3d-obj, part of 3D objects showed with red ripple.
The reason is not completely initialize component vector gl_FragColor
Reviewers: cedric, Hermet
Reviewed By: Hermet
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2292
Oleksandr Shcherbina [Fri, 10 Apr 2015 05:20:34 +0000 (14:20 +0900)]
[evas/evas_3D] Some fixes in evas-3d-shadows example
Summary:
Regard to this https://phab.enlightenment.org/D2250 improve view of 3D objects
Improve bug with incorect changing shade mode for billboard
Reviewers: Hermet, cedric
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2299
woochan lee [Fri, 10 Apr 2015 05:13:11 +0000 (14:13 +0900)]
Delete whitespaces for header and eo files
Summary: Fix whitespaces, indentation, wrap in eina headers.
Reviewers: cedric, jeffrey.w.grimshaw, Hermet
Reviewed By: Hermet
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2303
Conflicts:
src/lib/eina/eina_thread_queue.h
woochan lee [Fri, 10 Apr 2015 05:01:08 +0000 (14:01 +0900)]
Delete whitespaces, fix indentation in header, eo files
Summary: Delete whitespaces, fix indentation in header, eo files
Reviewers: cedric, raster, Hermet
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2305
Jean-Philippe Andre [Fri, 10 Apr 2015 01:49:02 +0000 (10:49 +0900)]
eina: Add NULL check for eina_threadqueue_free
@fix
Jean-Philippe Andre [Fri, 10 Apr 2015 01:49:39 +0000 (10:49 +0900)]
Evas: Fix use of uninitialized values
Not a meaningful issue, but let's make Coverity happy.
Fixes:
- CID 1293522
- CID 1293521
Felipe Magno de Almeida [Fri, 10 Apr 2015 01:46:24 +0000 (22:46 -0300)]
eio-model: Fix Eio model races in tests
Removed sleep and implemented a deterministic way to test if the test has really finished.
Mike Blumenkrantz [Fri, 10 Apr 2015 00:08:17 +0000 (20:08 -0400)]
efreetd: temporarily blacklist saving and monitoring root directory
ref T2280
Mike Blumenkrantz [Thu, 9 Apr 2015 23:52:08 +0000 (19:52 -0400)]
ecore-file: use hash for finding monitors
this should hugely improve the speed of file monitor event processing;
in my test case, 800,000+ monitors were present and the application was
entirely unable to process them
Tom Hacohen [Thu, 9 Apr 2015 22:11:18 +0000 (23:11 +0100)]
Ector: clean up makefile a bit.
Felipe Magno de Almeida [Thu, 9 Apr 2015 20:43:05 +0000 (17:43 -0300)]
eio model: Removed non-existent emodel.la library linking
The library emodel.la doesn't exist. Emodel is now efl model interface. No need to link to it.
Felipe Magno de Almeida [Thu, 9 Apr 2015 20:41:34 +0000 (17:41 -0300)]
evas-3d: Fix example compilation of evas_3d_blending
Felipe Magno de Almeida [Thu, 9 Apr 2015 20:25:20 +0000 (17:25 -0300)]
emile: Fix eina examples compilation when using a different build directory
The Makefile.am added only include dirs for top_builddir. Added for top_srcdir as well so it can find the headers.
Chris Michael [Tue, 7 Apr 2015 16:32:15 +0000 (12:32 -0400)]
ecore-drm: Fix output_geometry_get function
Summary: This fixes an issue where heights of all outputs would get
added, thus causing the ecore_evas to be created at the wrong size.
Now, the height will be whichever output is larger.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 16:31:25 +0000 (12:31 -0400)]
ecore-drm: Remove debug line from launcher
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 16:26:19 +0000 (12:26 -0400)]
ecore-drm: Set mode flag for preferred if this is the preferred mode
Summary: This fixes a minor oversight in ecore_drm_output_mode_add
which was not setting the mode->flag to preferred if this is a
preferred mode.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:50:35 +0000 (11:50 -0400)]
ecore-drm: Send ECORE_DRM_EVENT_OUTPUT on unplug also
Summary: If we unplug an output, we should still be sending this event
so that the compositor can remove any unplugged outputs
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:26:06 +0000 (11:26 -0400)]
ecore-drm: Better output name format
Summary: Make output names match format reported from kernel
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:24:17 +0000 (11:24 -0400)]
ecore-drm: Fix formatting
Summary: NO functional changes, just formatting
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:22:54 +0000 (11:22 -0400)]
ecore-drm: Fix issue with edid_parse_string truncating strings
Summary: We should only truncate the string if it's greater than 4
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:22:12 +0000 (11:22 -0400)]
ecore-drm: Add more connector types
Summary: libdrm has support for Virtual and DSI connector types, so
add those to the connector types
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:18:18 +0000 (11:18 -0400)]
ecore-drm: Fix formatting
Summary: NO functional changes, just formatting.
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 15:08:19 +0000 (11:08 -0400)]
ecore-drm: Move Eeze Udev Watch to Drm Device
Summary: Move the Eeze udev watch to inside the ecore_drm_device. This
allows us to only create One watch to catch all output changes. No
need for more than one watch (one per output) as was done previously
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 14:51:13 +0000 (10:51 -0400)]
evas-drm: Use Ecore_Drm_Fb for framebuffers
Summary: This commit changes the evas drm engine to use Ecore_Drm_Fb
for framebuffers. We remove the old 'Buffer' structure from the evas
engine and replace it in Outbuf with Ecore_Drm_Fb. This also removes
unused functions from the evas_drm.c file as we can now use
ecore_drm_fb calls
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 14:49:45 +0000 (10:49 -0400)]
ecore-drm: Add width & height to Ecore_Drm_Fb structure
Summary: This adds a w & h field to the Ecore_Drm_Fb structure so it
can be used from within the Evas engine
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 14:48:11 +0000 (10:48 -0400)]
evas-drm: Remove evas_bufmgr.c from the Evas Drm engine
Summary: This file is not needed for the software drm engine. This was
added (initially) for combining the drm software & hardware engines
into one. As that is not the case, this file is unused.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Chris Michael [Tue, 7 Apr 2015 14:23:41 +0000 (10:23 -0400)]
ecore-drm: Create all framebuffers using XRGB8888 by default
Summary: By default, we should be creating dumb buffers using XRGB8888
that way it does not matter if we have an alpha channel or not in the
buffer.
@fix
Signed-off-by: Chris Michael <cp.michael@samsung.com>
Felipe Magno de Almeida [Thu, 9 Apr 2015 14:16:51 +0000 (11:16 -0300)]
efl interfaces: Fix conditional for generation for pkgconfig for C++
Do not generate efl-cxx.pc when C++ is disabled.
Carsten Haitzler (Rasterman) [Thu, 9 Apr 2015 08:21:25 +0000 (17:21 +0900)]
eian threadqueue - be clearer on the message struct/format limitations
this makes the send func docs also be clear on the
Eina_Thread_Queue_Msg limitations like the wait func
Carsten Haitzler (Rasterman) [Thu, 9 Apr 2015 04:33:41 +0000 (13:33 +0900)]
edje_cc - handle image sets that are empty by skipping them
this fixes an edje_cc crash on compile for "invalid" edc that has
empty image sets.
Stefan Schmidt [Wed, 8 Apr 2015 12:36:17 +0000 (14:36 +0200)]
eina_matrix: Add since tags to all new functions in 1.14
Stefan Schmidt [Wed, 8 Apr 2015 12:20:27 +0000 (14:20 +0200)]
eina_quad: Add since tags for new eina_quad*()
This needs documentation for the new functions.
Jaeun Choi [Wed, 8 Apr 2015 12:29:13 +0000 (21:29 +0900)]
eina: eina_unicode_utf8_next_get should return 0
when one of the parameters is NULL to avoid null pointer access.
it also corresponds to the description in doc.
@fix
Stefan Schmidt [Wed, 8 Apr 2015 12:13:57 +0000 (14:13 +0200)]
eina: Add since tag for new eina_simple_xml_attribute_w3c_parse()
Stefan Schmidt [Wed, 8 Apr 2015 12:11:44 +0000 (14:11 +0200)]
eina: Add since tag for new eina_list_data_idx()
Also fix some whitespaces while being there.
Stefan Schmidt [Wed, 8 Apr 2015 12:06:42 +0000 (14:06 +0200)]
edje: Add since tag for new edje_file_iterator_new()
Stefan Schmidt [Wed, 8 Apr 2015 12:06:30 +0000 (14:06 +0200)]
edje: Add since tag for new edje_mmap_color_class_iterator_new()
Stefan Schmidt [Wed, 8 Apr 2015 12:03:26 +0000 (14:03 +0200)]
edje: Add since for new edje_color_class_active_iterator_new()
Jean-Philippe Andre [Wed, 8 Apr 2015 08:21:42 +0000 (17:21 +0900)]
Evas masking: Avoid potential crashes (SW)
Make sure not to sample the mask image outside its boundaries.
This is a series of last resort checks. I can not reproduce the
crashes but know they have happened.
I used EINA_UNLIKELY more for clarity than for compiler optimizations.
Conrad Meyer [Wed, 8 Apr 2015 03:06:58 +0000 (12:06 +0900)]
ecore_main.c: Refactor purely duplicate ecore_main_fd_handler_file_add()
Summary:
... to simply invoke `_ecore_main_fd_handler_add()`. The only difference appears to be the former sets `->file` to `EINA_TRUE`. So, we add that as a parameter.
You can consider this patch, and any other contributions I make to enlightenment, to be under the terms of whatever open source license governs that particular project, or at your option, the MIT license. Basically, if I'm uploading patches here, it's because I want them to be useful.
Test Plan: Should be pretty straightforward. I am in the process of doing a compile check.
Reviewers: #efl
Projects: #efl
Differential Revision: https://phab.enlightenment.org/D2302
mythri.venugopal [Wed, 8 Apr 2015 06:14:43 +0000 (15:14 +0900)]
Evas GL: Add missed GLES 3.0 functions in evgl_load_gles3_api.
Reviewers: wonsik, spacegrapher, jpeg
Subscribers: cedric
Differential Revision: https://phab.enlightenment.org/D2300
Conrad Meyer [Wed, 8 Apr 2015 05:34:46 +0000 (14:34 +0900)]
Edje: Remove excessive casts and use type Edje_Object
Use type Edje_Object instead of Eo in legacy EAPI's.
Spotted in TAsn's ABI report, under "Problems with Symbols".
I believe this will actually add two changes (Eo -> Edje_Object),
but I like the typing better ;)
Conrad Meyer [Wed, 8 Apr 2015 03:31:06 +0000 (12:31 +0900)]
Evas GL: Add @since 1.14 flags to Evas_Native_Surface
And enum
Conrad Meyer [Wed, 8 Apr 2015 03:28:34 +0000 (12:28 +0900)]
Ecore IMF: Add @since tags to new fields
pierre lamot [Thu, 2 Apr 2015 13:44:45 +0000 (15:44 +0200)]
ecore_cocoa: fix scrollwheel behavior
- prioritize vertical scroll over horizontal
- set amount to either -1 or 1, since EFL doesn't handle other value properly
- fix wheel bouncing with some devices (X:0,Y:0 scrolling events)
@fix
pierre lamot [Tue, 17 Mar 2015 10:27:37 +0000 (11:27 +0100)]
AUTHORS: update
Tom Hacohen [Tue, 7 Apr 2015 14:56:35 +0000 (15:56 +0100)]
Ector: Ship missing headers.
These headers are being included from public headers (Ector.h),
so they need to be available.
That's what happens when you push in code that's not actually used
by anyone.
@fix
ChunEon Park [Tue, 7 Apr 2015 14:06:43 +0000 (23:06 +0900)]
evas common: make logic same to c code version.
As C version,
It increase alpha value by 1 to avoid loosing of the remains while it divides
values. Neon version does same technique to make same results.