9p: fix fid refcount leak in v9fs_vfs_get_link

commit e5690f263208c5abce7451370b7786eb25b405eb upstream.

we check for protocol version later than required, after a fid has
been obtained. Just move the version check earlier.

Link: https://lkml.kernel.org/r/20220612085330.1451496-3-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl

commit beca774fc51a9ba8abbc869cf0c3d965ff17cd24 upstream.

We need to release directory fid if we fail halfway through open

This fixes fid leaking with xfstests generic 531

Link: https://lkml.kernel.org/r/20220612085330.1451496-2-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reported-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: Fix refcounting during full path walks for fid lookups

commit 2a3dcbccd64ba35c045fac92272ff981c4cbef44 upstream.

Decrement the refcount of the parent dentry's fid after walking
each path component during a full path walk for a lookup. Failure to do
so can lead to fids that are not clunked until the filesystem is
unmounted, as indicated by this warning:

 9pnet: found fid 3 not clunked

The improper refcounting after walking resulted in open(2) returning
-EIO on any directories underneath the mount point when using the virtio
transport. When using the fd transport, there's no apparent issue until
the filesytem is unmounted and the warning above is emitted to the logs.

In some cases, the user may not yet be attached to the filesystem and a
new root fid, associated with the user, is created and attached to the
root dentry before the full path walk is performed. Increment the new
root fid's refcount to two in that situation so that it can be safely
decremented to one after it is used for the walk operation. The new fid
will still be attached to the root dentry when
v9fs_fid_lookup_with_uid() returns so a final refcount of one is
correct/expected.

Link: https://lkml.kernel.org/r/20220527000003.355812-2-tyhicks@linux.microsoft.com
Link: https://lkml.kernel.org/r/20220612085330.1451496-4-asmadeus@codewreck.org
Fixes: 6636b6dcc3db ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: fix clunking fid multiple times discussed in second link]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: openvswitch: fix parsing of nw_proto for IPv6 fragments

commit 12378a5a75e33f34f8586706eb61cca9e6d4690c upstream.

When a packet enters the OVS datapath and does not match any existing
flows installed in the kernel flow cache, the packet will be sent to
userspace to be parsed, and a new flow will be created. The kernel and
OVS rely on each other to parse packet fields in the same way so that
packets will be handled properly.

As per the design document linked below, OVS expects all later IPv6
fragments to have nw_proto=44 in the flow key, so they can be correctly
matched on OpenFlow rules. OpenFlow controllers create pipelines based
on this design.

This behavior was changed by the commit in the Fixes tag so that
nw_proto equals the next_header field of the last extension header.
However, there is no counterpart for this change in OVS userspace,
meaning that this field is parsed differently between OVS and the
kernel. This is a problem because OVS creates actions based on what is
parsed in userspace, but the kernel-provided flow key is used as a match
criteria, as described in Documentation/networking/openvswitch.rst. This
leads to issues such as packets incorrectly matching on a flow and thus
the wrong list of actions being applied to the packet. Such changes in
packet parsing cannot be implemented without breaking the userspace.

The offending commit is partially reverted to restore the expected
behavior.

The change technically made sense and there is a good reason that it was
implemented, but it does not comply with the original design of OVS.
If in the future someone wants to implement such a change, then it must
be user-configurable and disabled by default to preserve backwards
compatibility with existing OVS versions.

Cc: stable@vger.kernel.org
Fixes: fa642f08839b ("openvswitch: Derive IP protocol number for IPv6 later frags")
Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments
Signed-off-by: Rosemarie O'Riorden <roriorden@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo NS50PU

commit 627ce0d68eb4b53e995b08089fa9da1e513ec5ba upstream.

Fixes headset detection on Clevo NS50PU.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220622150017.9897-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo PD70PNT

commit d49951219b0249d3eff49e4f02e0de82357bc8a0 upstream.

Fixes speaker output and headset detection on Clevo PD70PNT.

Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220617133028.50568-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly

commit 56ec3e755bd1041d35bdec020a99b327697ee470 upstream.

It turned out that Lenovo shipped two completely different products
with the very same PCI SSID, where both require different quirks;
namely, Lenovo C940 has already the fixup for its speaker
(ALC298_FIXUP_LENOVO_SPK_VOLUME) with the PCI SSID 17aa:3818, while
Yoga Duet 7 has also the very same PCI SSID but requires a different
quirk, ALC287_FIXUP_YOGA7_14TIL_SPEAKERS.

Fortunately, both are with different codecs (C940 with ALC298 and Duet
7 with ALC287), hence we can apply different fixes by checking the
codec ID.  This patch implements that special fixup function.

For easier handling, the internal function for applying a specific
fixup entry is exported as __snd_hda_apply_fixup(), so that it can be
called from the codec driver.  The rest is simply calling it with a
different fixup ID depending on the codec ID.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: nikitashvets@flyium.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5ca147d1-3a2d-60c6-c491-8aa844183222@redhat.com
Link: https://lore.kernel.org/r/20220614054831.14648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - ALC897 headset MIC no sound

commit fe6900bd8156467365bd5b976df64928fdebfeb0 upstream.

There is not have Headset Mic verb table in BIOS default.
So, it will have recording issue from headset MIC.
Add the verb table value without jack detect. It will turn on Headset Mic.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop

commit b2e6b3d9bbb0a59ba7c710cc06e44cc548301f5f upstream.

The HP Omen 15 laptop needs a quirk to toggle the mute LED. It already is implemented for a different variant of the HP Omen laptop so a fixup entry is needed for this variant.

Signed-off-by: Soham Sen <contact@sohamsen.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220609181919.45535-1-contact@sohamsen.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/conexant: Fix missing beep setup

commit 5faa0bc69102f3a4c605581564c367be5eb94dfa upstream.

Currently the Conexant codec driver sets up the beep NID after calling
snd_hda_gen_parse_auto_config().  It turned out that this results in
the insufficient setup for the beep control, as the generic parser
handles the fake path in snd_hda_gen_parse_auto_config() only if the
beep_nid is set up beforehand.

For dealing with the beep widget properly, call cx_auto_parse_beep()
before snd_hda_gen_parse_auto_config() call.

Fixes: 51e19ca5f755 ("ALSA: hda/conexant - Clean up beep code")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/via: Fix missing beep setup

commit c7807b27d510e5aa53c8a120cfc02c33c24ebb5f upstream.

Like the previous fix for Conexant codec, the beep_nid has to be set
up before calling snd_hda_gen_parse_auto_config(); otherwise it'd miss
the path setup.

Fix the call order for addressing the missing beep setup.

Fixes: 0e8f9862493a ("ALSA: hda/via - Simplify control management")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: quiet urandom warning ratelimit suppression message

commit c01d4d0a82b71857be7449380338bc53dde2da92 upstream.

random.c ratelimits how much it warns about uninitialized urandom reads
using __ratelimit(). When the RNG is finally initialized, it prints the
number of missed messages due to ratelimiting.

It has been this way since that functionality was introduced back in
2018. Recently, cc1e127bfa95 ("random: remove ratelimiting for in-kernel
unseeded randomness") put a bit more stress on the urandom ratelimiting,
which teased out a bug in the implementation.

Specifically, when under pressure, __ratelimit() will print its own
message and reset the count back to 0, making the final message at the
end less useful. Secondly, it does so as a pr_warn(), which apparently
is undesirable for people's CI.

Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly
for this purpose, so we set the flag.

Fixes: 4e00b339e264 ("random: rate limit unseeded randomness warnings")
Cc: stable@vger.kernel.org
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Ron Economos <re@w6rz.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: schedule mix_interrupt_randomness() less often

commit 534d2eaf1970274150596fdd2bf552721e65d6b2 upstream.

It used to be that mix_interrupt_randomness() would credit 1 bit each
time it ran, and so add_interrupt_randomness() would schedule mix() to
run every 64 interrupts, a fairly arbitrary number, but nonetheless
considered to be a decent enough conservative estimate.

Since e3e33fc2ea7f ("random: do not use input pool from hard IRQs"),
mix() is now able to credit multiple bits, depending on the number of
calls to add(). This was done for reasons separate from this commit, but
it has the nice side effect of enabling this patch to schedule mix()
less often.

Currently the rules are:
a) Credit 1 bit for every 64 calls to add().
b) Schedule mix() once a second that add() is called.
c) Schedule mix() once every 64 calls to add().

Rules (a) and (c) no longer need to be coupled. It's still important to
have _some_ value in (c), so that we don't "over-saturate" the fast
pool, but the once per second we get from rule (b) is a plenty enough
baseline. So, by increasing the 64 in rule (c) to something larger, we
avoid calling queue_work_on() as frequently during irq storms.

This commit changes that 64 in rule (c) to be 1024, which means we
schedule mix() 16 times less often. And it does *not* need to change the
64 in rule (a).

Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Cc: stable@vger.kernel.org
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.50

Link: https://lore.kernel.org/r/20220623164322.288837280@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transfer

commit c50f11c6196f45c92ca48b16a5071615d4ae0572 upstream.

Invalidating the buffer memory in arch_sync_dma_for_device() for
FROM_DEVICE transfers

When using the streaming DMA API to map a buffer prior to inbound
non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU
cachelines so that they will not be written back during the transfer and
corrupt the buffer contents written by the DMA. This, however, poses two
potential problems:

  (1) If the DMA transfer does not write to every byte in the buffer,
      then the unwritten bytes will contain stale data once the transfer
      has completed.

  (2) If the buffer has a virtual alias in userspace, then stale data
      may be visible via this alias during the period between performing
      the cache invalidation and the DMA writes landing in memory.

Address both of these issues by cleaning (aka writing-back) the dirty
lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding
them using invalidation.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606152150.GA31568@willie-the-truck
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220610151228.4562-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: core: Initialize rs485 RTS polarity already on probe

commit 2dd8a74fddd21b95dcc60a2d3c9eaec993419d69 upstream.

RTS polarity of rs485-enabled ports is currently initialized on uart
open via:

tty_port_open()
  tty_port_block_til_ready()
    tty_port_raise_dtr_rts()  # if (C_BAUD(tty))
      uart_dtr_rts()
        uart_port_dtr_rts()

There's at least three problems here:

First, if no baud rate is set, RTS polarity is not initialized.
That's the right thing to do for rs232, but not for rs485, which
requires that RTS is deasserted unconditionally.

Second, if the DeviceTree property "linux,rs485-enabled-at-boot-time" is
present, RTS should be deasserted as early as possible, i.e. on probe.
Otherwise it may remain asserted until first open.

Third, even though RTS is deasserted on open and close, it may
subsequently be asserted by uart_throttle(), uart_unthrottle() or
uart_set_termios() because those functions aren't rs485-aware.
(Only uart_tiocmset() is.)

To address these issues, move RTS initialization from uart_port_dtr_rts()
to uart_configure_port().  Prevent subsequent modification of RTS
polarity by moving the existing rs485 check from uart_tiocmget() to
uart_update_mctrl().

That way, RTS is initialized on probe and then remains unmodified unless
the uart transmits data.  If rs485 is enabled at runtime (instead of at
boot) through a TIOCSRS485 ioctl(), RTS is initialized by the uart
driver's ->rs485_config() callback and then likewise remains unmodified.

The PL011 driver initializes RTS on uart open and prevents subsequent
modification in its ->set_mctrl() callback.  That code is obsoleted by
the present commit, so drop it.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/2d2acaf3a69e89b7bf687c912022b11fd29dfa1e.1642909284.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Add selftest for calling global functions from freplace

commit 2cf7b7ffdae519b284f1406012b52e2282fa36bf upstream.

Add a selftest that calls a global function with a context object parameter
from an freplace function to check that the program context type is
correctly converted to the freplace target when fetching the context type
from the kernel BTF.

v2:
- Trim includes
- Get rid of global function
- Use __noinline

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ backport: fix conflict because tests were not serialised ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs

commit f858c2b2ca04fc7ead291821a793638ae120c11d upstream.

The verifier allows programs to call global functions as long as their
argument types match, using BTF to check the function arguments. One of the
allowed argument types to such global functions is PTR_TO_CTX; however the
check for this fails on BPF_PROG_TYPE_EXT functions because the verifier
uses the wrong type to fetch the vmlinux BTF ID for the program context
type. This failure is seen when an XDP program is loaded using
libxdp (which loads it as BPF_PROG_TYPE_EXT and attaches it to a global XDP
type program).

Fix the issue by passing in the target program type instead of the
BPF_PROG_TYPE_EXT type to bpf_prog_get_ctx() when checking function
argument compatibility.

The first Fixes tag refers to the latest commit that touched the code in
question, while the second one points to the code that first introduced
the global function call verification.

v2:
- Use resolve_prog_type()

Fixes: 3363bd0cfbb8 ("bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support")
Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
Reported-by: Simon Sundberg <simon.sundberg@kau.se>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ backport: open-code missing resolve_prog_type() helper, resolve context diff ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_ether: fix regression in setting fixed MAC address

commit b337af3a4d6147000b7ca6b3438bf5c820849b37 upstream.

In systemd systems setting a fixed MAC address through
the "dev_addr" module argument fails systematically.
When checking the MAC address after the interface is created
it always has the same but different MAC address to the one
supplied as argument.

This is partially caused by systemd which by default will
set an internally generated permanent MAC address for interfaces
that are marked as having a randomly generated address.

Commit 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in
setting MAC address in setup phase") didn't take into account
the fact that the interface must be marked as having a set
MAC address when it's set as module argument.

Fixed by marking the interface with NET_ADDR_SET when
the "dev_addr" module argument is supplied.

Fixes: 890d5b40908bfd1a ("usb: gadget: u_ether: fix race in setting MAC address in setup phase")
Cc: stable@vger.kernel.org
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20220603153459.32722-1-posteuca@mutex.one
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zonefs: fix zonefs_iomap_begin() for reads

commit c1c1204c0d0c1dccc1310b9277fb2bd8b663d8fe upstream.

If a readahead is issued to a sequential zone file with an offset
exactly equal to the current file size, the iomap type is set to
IOMAP_UNWRITTEN, which will prevent an IO, but the iomap length is
calculated as 0. This causes a WARN_ON() in iomap_iter():

[17309.548939] WARNING: CPU: 3 PID: 2137 at fs/iomap/iter.c:34 iomap_iter+0x9cf/0xe80
[...]
[17309.650907] RIP: 0010:iomap_iter+0x9cf/0xe80
[...]
[17309.754560] Call Trace:
[17309.757078]  <TASK>
[17309.759240]  ? lock_is_held_type+0xd8/0x130
[17309.763531]  iomap_readahead+0x1a8/0x870
[17309.767550]  ? iomap_read_folio+0x4c0/0x4c0
[17309.771817]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[17309.778848]  ? lock_release+0x370/0x750
[17309.784462]  ? folio_add_lru+0x217/0x3f0
[17309.790220]  ? reacquire_held_locks+0x4e0/0x4e0
[17309.796543]  read_pages+0x17d/0xb60
[17309.801854]  ? folio_add_lru+0x238/0x3f0
[17309.807573]  ? readahead_expand+0x5f0/0x5f0
[17309.813554]  ? policy_node+0xb5/0x140
[17309.819018]  page_cache_ra_unbounded+0x27d/0x450
[17309.825439]  filemap_get_pages+0x500/0x1450
[17309.831444]  ? filemap_add_folio+0x140/0x140
[17309.837519]  ? lock_is_held_type+0xd8/0x130
[17309.843509]  filemap_read+0x28c/0x9f0
[17309.848953]  ? zonefs_file_read_iter+0x1ea/0x4d0 [zonefs]
[17309.856162]  ? trace_contention_end+0xd6/0x130
[17309.862416]  ? __mutex_lock+0x221/0x1480
[17309.868151]  ? zonefs_file_read_iter+0x166/0x4d0 [zonefs]
[17309.875364]  ? filemap_get_pages+0x1450/0x1450
[17309.881647]  ? __mutex_unlock_slowpath+0x15e/0x620
[17309.888248]  ? wait_for_completion_io_timeout+0x20/0x20
[17309.895231]  ? lock_is_held_type+0xd8/0x130
[17309.901115]  ? lock_is_held_type+0xd8/0x130
[17309.906934]  zonefs_file_read_iter+0x356/0x4d0 [zonefs]
[17309.913750]  new_sync_read+0x2d8/0x520
[17309.919035]  ? __x64_sys_lseek+0x1d0/0x1d0

Furthermore, this causes iomap_readahead() to loop forever as
iomap_readahead_iter() always returns 0, making no progress.

Fix this by treating reads after the file size as access to holes,
setting the iomap type to IOMAP_HOLE, the iomap addr to IOMAP_NULL_ADDR
and using the length argument as is for the iomap length. To simplify
the code with this change, zonefs_iomap_begin() is split into the read
variant, zonefs_read_iomap_begin() and zonefs_read_iomap_ops, and the
write variant, zonefs_write_iomap_begin() and zonefs_write_iomap_ops.

Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mana: Add handling of CQE_RX_TRUNCATED

commit e4b7621982d29f26ff4d39af389e5e675a4ffed4 upstream.

The proper way to drop this kind of CQE is advancing rxq tail
without indicating the packet to the upper network layer.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Don't reinitialize DMCUB on s0ix resume

commit 79d6b9351f086e0f914a26915d96ab52286ec46c upstream.

[Why]
PSP will suspend and resume DMCUB. Driver should just wait for DMCUB to
finish the auto load before continuining instead of placing it into
reset, wiping its firmware state and reinitializing.

If we don't let DMCUB fully finish initializing for S0ix then some state
will be lost and screen corruption can occur due to incorrect address
translation.

[How]
Use dmub_srv callbacks to determine in DMCUB is running and wait for
auto-load to complete before continuining.

In S0ix DMCUB will be running and DAL fw so initialize will skip.

In S3 DMCUB will not be running and we will do a full hardware init.

In S3 DMCUB will be running but will not be DAL fw so we will also do
a full hardware init.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/mm: use non-quiescing sske for KVM switch to keyed guest

commit 3ae11dbcfac906a8c3a480e98660a823130dc16a upstream.

The switch to a keyed guest does not require a classic sske as the other
guest CPUs are not accessing the key before the switch is complete.
By using the NQ SSKE things are faster especially with multiple guests.

Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Suggested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220530092706.11637-3-borntraeger@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.49

Link: https://lore.kernel.org/r/20220620124724.380838401@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx8mp: fix usb_root_clk parent

commit cf7f3f4fa9e57b8e9f594823e77e6cbb0ce2b254 upstream.

According to reference mannual CCGR77(usb) sources from hsio_axi, fix
it.

Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220507125430.793287-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/book3e: get rid of #include <generated/compile.h>

commit 7ad4bd887d27c6b6ffbef216f19c19f8fe2b8f52 upstream.

You cannot include <generated/compile.h> here because it is generated
in init/Makefile but there is no guarantee that it happens before
arch/powerpc/mm/nohash/kaslr_booke.c is compiled for parallel builds.

The places where you can reliably include <generated/compile.h> are:

  - init/          (because init/Makefile can specify the dependency)
  - arch/*/boot/   (because it is compiled after vmlinux)

Commit f231e4333312 ("hexagon: get rid of #include <generated/compile.h>")
fixed the last breakage at that time, but powerpc re-added this.

<generated/compile.h> was unneeded because 'build_str' is almost the
same as 'linux_banner' defined in init/version.c

Let's copy the solution from MIPS.
(get_random_boot() in arch/mips/kernel/relocate.c)

Fixes: 6a38ea1d7b94 ("powerpc/fsl_booke/32: randomize the kernel image offset")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220604085050.4078927-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-pci: Remove wrong address verification in vp_del_vqs()

commit 7e415282b41bf0d15c6e0fe268f822d9b083f2f7 upstream.

GCC 12 enhanced -Waddress when comparing array address to null [0],
which warns:

    drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’:
    drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress]
      257 |                         if (vp_dev->msix_affinity_masks[i])
          |                             ^~~~~~

In fact, the verification is comparing the result of a pointer
arithmetic, the address "msix_affinity_masks + i", which will always
evaluate to true.

Under the hood, free_cpumask_var() calls kfree(), which is safe to pass
NULL, not requiring non-null verification.  So remove the verification
to make compiler happy (happy compiler, happy life).

[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103

Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine

commit 024a7ad9eb4df626ca8c77fef4f67fd0ebd559d2 upstream.

The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220513121648.28584-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Don't read a HW interrupt pending state in user context

commit 2cdea19a34c2340b3aa69508804efe4e3750fcec upstream.

Since 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state
from the HW"), we're able to source the pending bit for an interrupt
that is stored either on the physical distributor or on a device.

However, this state is only available when the vcpu is loaded,
and is not intended to be accessed from userspace. Unfortunately,
the GICv2 emulation doesn't provide specific userspace accessors,
and we fallback with the ones that are intended for the guest,
with fatal consequences.

Add a new vgic_uaccess_read_pending() accessor for userspace
to use, build on top of the existing vgic_mmio_read_pending().

Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 5bfa685e62e9 ("KVM: arm64: vgic: Read HW interrupt pending state from the HW")
Link: https://lore.kernel.org/r/20220607131427.1164881-2-maz@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add reserved GDT blocks check

commit b55c3cd102a6f48b90e61c44f7f3dda8c290c694 upstream.

We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.

 mkfs.ext4 /dev/sda 3G
 tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
 mount /dev/sda /mnt
 resize2fs /dev/sda 8G

 ========
 BUG: kernel NULL pointer dereference, address: 0000000000000028
 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
 ...
 RIP: 0010:ext4_flex_group_add+0xe08/0x2570
 ...
 Call Trace:
  <TASK>
  ext4_resize_fs+0xbec/0x1660
  __ext4_ioctl+0x1749/0x24e0
  ext4_ioctl+0x12/0x20
  __x64_sys_ioctl+0xa6/0x110
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f2dd739617b
 ========

The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make variable "count" signed

commit bc75a6eb856cb1507fa907bf6c1eda91b3fef52f upstream.

Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().

Fixes: 46c116b920eb ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix bug_on ext4_mb_use_inode_pa

commit a08f789d2ab5242c07e716baf9a835725046be89 upstream.

Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
 ext4_mb_new_blocks+0x9df/0x5d30
 ext4_ext_map_blocks+0x1803/0x4d80
 ext4_map_blocks+0x3a4/0x1a10
 ext4_writepages+0x126d/0x2c30
 do_writepages+0x7f/0x1b0
 __filemap_fdatawrite_range+0x285/0x3b0
 file_write_and_wait_range+0xb1/0x140
 ext4_sync_file+0x1aa/0xca0
 vfs_fsync_range+0xfb/0x260
 do_fsync+0x48/0xa0
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
do_fsync
 vfs_fsync_range
  ext4_sync_file
   file_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      ext4_writepages
       mpage_map_and_submit_extent
        mpage_map_one_extent
         ext4_map_blocks
          ext4_mb_new_blocks
           ext4_mb_normalize_request
            >>> start + size <= ac->ac_o_ex.fe_logical
           ext4_mb_regular_allocator
            ext4_mb_simple_scan_group
             ext4_mb_use_best_found
              ext4_mb_new_preallocation
               ext4_mb_new_inode_pa
                ext4_mb_use_inode_pa
                 >>> set ac->ac_b_ex.fe_len <= 0
           ext4_mb_mark_diskspace_used
            >>> BUG_ON(ac->ac_b_ex.fe_len <= 0);

we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`

The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.

Cc: stable@kernel.org
Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix super block checksum incorrect after mount

commit 9b6641dd95a0c441b277dd72ba22fed8d61f76ad upstream.

We got issue as follows:
[home]# mount  /dev/sda  test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock!  Retrying...

Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.

To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle

commit 57cd6d157eb479f0a8e820fd36b7240845c8a937 upstream.

RCU_NONIDLE usage during __cfi_slowpath_diag can result in an invalid
RCU state in the cpuidle code path:

  WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:613 rcu_eqs_enter+0xe4/0x138
  ...
  Call trace:
    rcu_eqs_enter+0xe4/0x138
    rcu_idle_enter+0xa8/0x100
    cpuidle_enter_state+0x154/0x3a8
    cpuidle_enter+0x3c/0x58
    do_idle.llvm.6590768638138871020+0x1f4/0x2ec
    cpu_startup_entry+0x28/0x2c
    secondary_start_kernel+0x1b8/0x220
    __secondary_switched+0x94/0x98

Instead, call rcu_irq_enter/exit to wake up RCU only when needed and
disable interrupts for the entire CFI shadow/module check when we do.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20220531175910.890307-1-samitolvanen@google.com
Fixes: cf68fffb66d6 ("add support for Clang CFI")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Cap OLED brightness per max frame-average luminance

commit 4fd17f2ac0aa4e48823ac2ede5b050fb70300bf4 upstream.

[Why]
For OLED eDP the Display Manager uses max_cll value as a limit
for brightness control.
max_cll defines the content light luminance for individual pixel.
Whereas max_fall defines frame-average level luminance.
The user may not observe the difference in brightness in between
max_fall and max_cll.
That negatively impacts the user experience.

[How]
Use max_fall value instead of max_cll as a limit for brightness control.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm mirror log: round up region bitmap size to BITS_PER_LONG

commit 85e123c27d5cbc22cfdc01de1e2ca1d9003a02d0 upstream.

The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.

Fix this bug by rounding up bitset_size to BITS_PER_LONG.

This bug was found by running the lvm2 testsuite with kasan.

Fixes: 29121bd0b00e ("[PATCH] dm mirror log: bitset_size fix")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()

commit 928ea98252ad75118950941683893cf904541da9 upstream.

In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to
fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in
fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io
triggers KASAN use-after-free. To avoid the use-after-free, keep the
reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to
fsl_destroy_mc_io().

This patch needs rework to apply to kernels older than v5.15.

Fixes: f93627146f0e ("staging: fsl-mc: fix asymmetry in destroy of mc_io")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220601105159.87752-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Store to lsr_save_flags after lsr read

commit be03b0651ffd8bab69dfd574c6818b446c0753ce upstream.

Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.

This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.

Re-add the lsr_save_flags fix and properly mark it's a fix.

Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc
Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Cc: stable <stable@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: n_gsm: Debug output allocation must use GFP_ATOMIC

commit e74024b2eccbb784824a0f9feaeaaa3b47514b79 upstream.

Dan Carpenter <dan.carpenter@oracle.com> reported the following Smatch
warning:

drivers/tty/n_gsm.c:720 gsm_data_kick()
warn: sleeping in atomic context

This is because gsm_control_message() is holding a spin lock so
gsm_hex_dump_bytes() needs to use GFP_ATOMIC instead of GFP_KERNEL.

Fixes: 925ea0fa5277 ("tty: n_gsm: Fix packet data hex dump output")
Cc: stable <stable@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220523155052.57129-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: change ep->ep safe in ffs_epfile_io()

commit 0698f0209d8032e8869525aeb68f65ee7fde12ad upstream.

In ffs_epfile_io(), when read/write data in blocking mode, it will wait
the completion in interruptible mode, if task receive a signal, it will
terminate the wait, at same time, if function unbind occurs,
ffs_func_unbind() will kfree all eps, ffs_epfile_io() still try to
dequeue request by dereferencing ep which may become invalid.

Fix it by add ep spinlock and will not dereference ep if it is not valid.

Cc: <stable@vger.kernel.org> # 5.15
Reported-by: Michael Wu <michael@allwinnertech.com>
Tested-by: Michael Wu <michael@allwinnertech.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1654863478-26228-3-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: change ep->status safe in ffs_epfile_io()

commit fb1f16d74e263baa4ad11e31e28b68f144aa55ed upstream.

If a task read/write data in blocking mode, it will wait the completion
in ffs_epfile_io(), if function unbind occurs, ffs_func_unbind() will
kfree ffs ep, once the task wake up, it still dereference the ffs ep to
obtain the request status.

Fix it by moving the request status to io_data which is stack-safe.

Cc: <stable@vger.kernel.org> # 5.15
Reported-by: Michael Wu <michael@allwinnertech.com>
Tested-by: Michael Wu <michael@allwinnertech.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1654863478-26228-2-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe

commit 4757c9ade34178b351580133771f510b5ffcf9c8 upstream.

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.

Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdnsp: Fixed setting last_trb incorrectly

commit 5c7578c39c3fffe85b7d15ca1cf8cf7ac38ec0c1 upstream.

When ZLP occurs in bulk transmission, currently cdnsp will set last_trb
for the last two TRBs, it will trigger an error "ERROR Transfer event TRB
DMA ptr not part of current TD ...".

Fixes: e913aada0683 ("usb: cdnsp: Fixed issue with ZLP")
Cc: stable <stable@kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Jing Leng <jleng@ambarella.com>
Link: https://lore.kernel.org/r/20220609021134.1606-1-3090101217@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Fix memory leak in dwc2_hcd_init

commit 3755278f078460b021cd0384562977bf2039a57a upstream.

usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this.

Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()")
Cc: stable <stable@kernel.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_ti: add Agilent E5805A support

commit 908e698f2149c3d6a67d9ae15c75545a3f392559 upstream.

Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti.

Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Cinterion MV31 with new baseline

commit 158f7585bfcea4aae0ad4128d032a80fec550df1 upstream.

Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.

Below is test evidence:
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b8 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B8 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b9 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B9 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

For PID 00b8, interface 3 is GNSS port which don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com
[ johan: rename defines using a "2" infix ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: memneq - move into lib/

commit abfed87e2a12bd246047d78c01d81eb9529f1d06 upstream.

This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.

This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:

  lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
  curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
  curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'

Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi: vmk80xx: fix expression for tx buffer size

commit 242439f7e279d86b3f73b5de724bc67b2f8aeb07 upstream.

The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`).  Fix it.

Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow")
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 4.9+
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add raptor lake point S DID

commit 3ed8c7d39cfef831fe508fc1308f146912fa72e6 upstream.

Add Raptor (Point) Lake S device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220606144225.282375-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hbm: drop capability response on early shutdown

commit 68553650bc9c57c7e530c84e5b2945e9dfe1a560 upstream.

Drop HBM responses also in the early shutdown phase where
the usual traffic is allowed.
Extend the rule that drop HBM responses received during the shutdown
phase by also in MEI_DEV_POWERING_DOWN state.
This resolves the stall if the driver is stopping in the middle
of the link initialization or link reset.

Drop the capabilities response on early shutdown.

Fixes: 6d7163f2c49f ("mei: hbm: drop hbm responses on early shutdown")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220606144225.282375-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: Use standard optional ref clock implementation

[ Upstream commit 27071b5cbca59d8e8f8750c199a6cbf8c9799963 ]

Even though the DW I2C controller reference clock source is requested by
the method devm_clk_get() with non-optional clock requirement the way the
clock handler is used afterwards has a pure optional clock semantic
(though in some circumstances we can get a warning about the clock missing
printed in the system console). There is no point in reimplementing that
functionality seeing the kernel clock framework already supports the
optional interface from scratch. Thus let's convert the platform driver to
using it.

Note by providing this commit we get to fix two problems. The first one
was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for
an interface clock"). It causes not having the interface clock (pclk)
enabled/disabled in case if the reference clock isn't provided. The second
problem was first introduced in commit b33af11de236 ("i2c: designware: Do
not require clock when SSCN and FFCN are provided"). Since that
modification the deferred probe procedure has been unsupported in case if
the interface clock isn't ready.

Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock")
Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Fix balance_push() vs __sched_setscheduler()

[ Upstream commit 04193d590b390ec7a0592630f46d559ec6564ba1 ]

The purpose of balance_push() is to act as a filter on task selection
in the case of CPU hotplug, specifically when taking the CPU out.

It does this by (ab)using the balance callback infrastructure, with
the express purpose of keeping all the unlikely/odd cases in a single
place.

In order to serve its purpose, the balance_push_callback needs to be
(exclusively) on the callback list at all times (noting that the
callback always places itself back on the list the moment it runs,
also noting that when the CPU goes down, regular balancing concerns
are moot, so ignoring them is fine).

And here-in lies the problem, __sched_setscheduler()'s use of
splice_balance_callbacks() takes the callbacks off the list across a
lock-break, making it possible for, an interleaving, __schedule() to
see an empty list and not get filtered.

Fixes: ae7927023243 ("sched: Optimize finish_lock_switch()")
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Link: https://lkml.kernel.org/r/20220519134706.GH2578@worktop.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/realtek-rtl: Fix refcount leak in map_interrupts

[ Upstream commit eff4780f83d0ae3e5b6c02ff5d999dc4c1c5c8ce ]

of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function doesn't call of_node_put() in error path.
Call of_node_put() directly after of_property_read_u32() to cover
both normal path and error path.

Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-7-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions

[ Upstream commit fa1ad9d4cc47ca2470cd904ad4519f05d7e43a2b ]

of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions

[ Upstream commit ec8401a429ffee34ccf38cebf3443f8d5ae6cb0d ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
When kcalloc fails, it missing of_node_put() and results in refcount
leak. Fix this by goto out_put_node label.

Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic/realview: Fix refcount leak in realview_gic_of_init

[ Upstream commit f4b98e314888cc51486421bcf6d52852452ea48b ]

of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 82b0a434b436 ("irqchip/gic/realview: Support more RealView DCC variants")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: npcm7xx: Add check for platform_driver_register

[ Upstream commit 6ba12b56b9b844b83ed54fb7ed59fb0eb41e4045 ]

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

faddr2line: Fix overlapping text section failures, the sequel

[ Upstream commit dcea997beed694cbd8705100ca1a6eb0d886de69 ]

If a function lives in a section other than .text, but .text also exists
in the object, faddr2line may wrongly assume .text.  This can result in
comically wrong output.  For example:

  $ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c
  enter_from_user_mode+0x1c/0x30:
  find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40
  (inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504

Fix it by passing the section name to addr2line, unless the object file
is vmlinux, in which case the symbol table uses absolute addresses.

Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/7d25bc1408bd3a750ac26e60d2f2815a5f4a8363.1654130536.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Fix handling of offline queues in blk_mq_alloc_request_hctx()

[ Upstream commit 14dc7a18abbe4176f5626c13c333670da8e06aa1 ]

This patch prevents that test nvme/004 triggers the following:

UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
 show_stack+0x52/0x58
 dump_stack_lvl+0x49/0x5e
 dump_stack+0x10/0x12
 ubsan_epilogue+0x9/0x3b
 __ubsan_handle_out_of_bounds.cold+0x44/0x49
 blk_mq_alloc_request_hctx+0x304/0x310
 __nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
 nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
 nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
 nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
 nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
 nvmf_dev_write+0xae/0x111 [nvme_fabrics]
 vfs_write+0x144/0x560
 ksys_write+0xb7/0x140
 __x64_sys_write+0x42/0x50
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 20e4d8139319 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

init: Initialize noop_backing_dev_info early

[ Upstream commit 4bca7e80b6455772b4bf3f536dcbc19aac424d6a ]

noop_backing_dev_info is used by superblocks of various
pseudofilesystems such as kdevtmpfs. After commit 10e14073107d
("writeback: Fix inode->i_io_list not be protected by inode->i_lock
error") this broke because __mark_inode_dirty() started to access more
fields from noop_backing_dev_info and this led to crashes inside
locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty().
Fix the problem by initializing noop_backing_dev_info before the
filesystems get mounted.

Fixes: 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error")
Reported-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-and-tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

certs/blacklist_hashes.c: fix const confusion in certs blacklist

[ Upstream commit 6a1c3767d82ed8233de1263aa7da81595e176087 ]

This file fails to compile as follows:

  CC      certs/blacklist_hashes.o
certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes]
    4 | const char __initdata *const blacklist_hashes[] = {
      | ^~~~~
In file included from certs/blacklist_hashes.c:2:
certs/blacklist.h:5:38: note: previous declaration here
    5 | extern const char __initconst *const blacklist_hashes[];
      |                                      ^~~~~~~~~~~~~~~~

Apply the same fix as commit 2be04df5668d ("certs/blacklist_nohashes.c:
fix const confusion in certs blacklist").

Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: ftrace: consistently handle PLTs.

[ Upstream commit a6253579977e4c6f7818eeb05bf2bc65678a7187 ]

Sometimes it is necessary to use a PLT entry to call an ftrace
trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(),
with each having *almost* identical logic, but this is not handled by
ftrace_modify_call() since its introduction in commit:

  3b23e4991fb66f6d ("arm64: implement ftrace with regs")

Due to this, if we ever were to call ftrace_modify_call() for a callsite
which requires a PLT entry for a trampoline, then either:

a) If the old addr requires a trampoline, ftrace_modify_call() will use
   an out-of-range address to generate the 'old' branch instruction.
   This will result in warnings from aarch64_insn_gen_branch_imm() and
   ftrace_modify_code(), and no instructions will be modified. As
   ftrace_modify_call() will return an error, this will result in
   subsequent internal ftrace errors.

b) If the old addr does not require a trampoline, but the new addr does,
   ftrace_modify_call() will use an out-of-range address to generate the
   'new' branch instruction. This will result in warnings from
   aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace
   the 'old' branch with a BRK. This will result in a kernel panic when
   this BRK is later executed.

Practically speaking, case (a) is vastly more likely than case (b), and
typically this will result in internal ftrace errors that don't
necessarily affect the rest of the system. This can be demonstrated with
an out-of-tree test module which triggers ftrace_modify_call(), e.g.

| # insmod test_ftrace.ko
| test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024
| branch_imm_common: offset out of range
| branch_imm_common: offset out of range
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace]
|  actual:   1d:00:00:94
| Updating ftrace call site to call a different ftrace function
| ftrace record flags: e0000002
|  (2) R
|  expected tramp: ffffb374ae42ed54
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0
| Modules linked in: test_ftrace(+)
| CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13
| Hardware name: linux,dummy-virt (DT)
| pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x280/0x2b0
| lr : ftrace_bug+0x280/0x2b0
| sp : ffff80000839ba00
| x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0
| x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000
| x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8
| x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff
| x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4
| x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8
| x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167
| x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022
| Call trace:
|  ftrace_bug+0x280/0x2b0
|  ftrace_replace_code+0x98/0xa0
|  ftrace_modify_all_code+0xe0/0x144
|  arch_ftrace_update_code+0x14/0x20
|  ftrace_startup+0xf8/0x1b0
|  register_ftrace_function+0x38/0x90
|  test_ftrace_init+0xd0/0x1000 [test_ftrace]
|  do_one_initcall+0x50/0x2b0
|  do_init_module+0x50/0x1f0
|  load_module+0x17c8/0x1d64
|  __do_sys_finit_module+0xa8/0x100
|  __arm64_sys_finit_module+0x2c/0x3c
|  invoke_syscall+0x50/0x120
|  el0_svc_common.constprop.0+0xdc/0x100
|  do_el0_svc+0x3c/0xd0
|  el0_svc+0x34/0xb0
|  el0t_64_sync_handler+0xbc/0x140
|  el0t_64_sync+0x18c/0x190
| ---[ end trace 0000000000000000 ]---

We can solve this by consistently determining whether to use a PLT entry
for an address.

Note that since (the earlier) commit:

  f1a54ae9af0da4d7 ("arm64: module/ftrace: intialize PLT at load time")

... we can consistently determine the PLT address that a given callsite
will use, and therefore ftrace_make_nop() does not need to skip
validation when a PLT is in use.

This patch factors the existing logic out of ftrace_make_call() and
ftrace_make_nop() into a common ftrace_find_callable_addr() helper
function, which is used by ftrace_make_call(), ftrace_make_nop(), and
ftrace_modify_call(). In ftrace_make_nop() the patching is consistently
validated by ftrace_modify_code() as we can always determine what the
old instruction should have been.

Fixes: 3b23e4991fb6 ("arm64: implement ftrace with regs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: ftrace: fix branch range checks

[ Upstream commit 3eefdf9d1e406f3da47470b2854347009ffcb6fa ]

The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.

This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.

If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.

If an in-range branch were erroeously rejected, then:

* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
  use of a PLT entry, which is benign.

  Note that this is the common case, as this is selected by
  CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
  which distributions typically seelct. This is also selected by
  CONFIG_ARM64_ERRATUM_843419.

* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
  internal ftrace failures.

* For core kernel text, this would result in internal ftrace failues.

  Note that for this to happen, the kernel text would need to be at
  least 128M bytes in size, and typical configurations are smaller tha
  this.

Fix this by calculating the offset *from* the branch *to* the target in
both functions.

Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg

[ Upstream commit 219b51a6f040fa5367adadd7d58c4dda0896a01d ]

The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock
and block until it receives a packet from the remote. If the client
doesn`t connect to server and calls read() directly, it will not
receive any packets forever. As a result, the deadlock will happen.

The fail log caused by deadlock is shown below:

[  369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds.
[  369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  369.613058] Call Trace:
[  369.613315]  <TASK>
[  369.614072]  __schedule+0x2f9/0xb20
[  369.615029]  schedule+0x49/0xb0
[  369.615734]  __lock_sock+0x92/0x100
[  369.616763]  ? destroy_sched_domains_rcu+0x20/0x20
[  369.617941]  lock_sock_nested+0x6e/0x70
[  369.618809]  ax25_bind+0xaa/0x210
[  369.619736]  __sys_bind+0xca/0xf0
[  369.620039]  ? do_futex+0xae/0x1b0
[  369.620387]  ? __x64_sys_futex+0x7c/0x1c0
[  369.620601]  ? fpregs_assert_state_consistent+0x19/0x40
[  369.620613]  __x64_sys_bind+0x11/0x20
[  369.621791]  do_syscall_64+0x3b/0x90
[  369.622423]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  369.623319] RIP: 0033:0x7f43c8aa8af7
[  369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[  369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7
[  369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005
[  369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700
[  369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe
[  369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700

This patch replaces skb_recv_datagram() with an open-coded variant of it
releasing the socket lock before the __skb_wait_for_more_packets() call
and re-acquiring it after such call in order that other functions that
need socket lock could be executed.

what's more, the socket lock will be released only when recvmsg() will
block and that should produce nicer overall behavior.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reported-by: Thomas Habets <thomas@@habets.se>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bgmac: Fix an erroneous kfree() in bgmac_remove()

[ Upstream commit d7dd6eccfbc95ac47a12396f84e7e1b361db654b ]

'bgmac' is part of a managed resource allocated with bgmac_alloc(). It
should not be freed explicitly.

Remove the erroneous kfree() from the .remove() function.

Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum_cnt: Reorder counter pools

[ Upstream commit 4b7a632ac4e7101ceefee8484d5c2ca505d347b3 ]

Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.

In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)

Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.

Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: add device name to warning in uuid_show()

[ Upstream commit 1fc766b5c08417248e0008bca14c3572ac0f1c26 ]

This provides more context to users.

Old message:

[   00.000000] No UUID available providing old NGUID

New message:

[   00.000000] block nvme0n1: No UUID available providing old NGUID

Fixes: d934f9848a77 ("nvme: provide UUID value to userspace")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization

[ Upstream commit 12a3670887725df364cc3e030cf3bede6f13b364 ]

Currently in driver initialization process, driver will set shapping
parameters of tm port to default speed read from firmware. However, the
speed of SFP module may not be default speed, so shapping parameters of
tm port may be incorrect.

To fix this problem, driver sets new shapping parameters for tm port
after getting exact speed of SFP module in this case.

Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: don't push link state to VF if unalive

[ Upstream commit 283847e3ef6dbf79bf67083b5ce7b8033e8b6f34 ]

It's unnecessary to push link state to unalive VF, and the VF will
query link state from PF when it being start works.

Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: set port base vlan tbl_sta to false before removing old vlan

[ Upstream commit 9eda7d8bcbdb6909f202edeedff51948f1cad1e5 ]

When modify port base vlan, the port base vlan tbl_sta needs to set to
false before removing old vlan, to indicate this operation is not finish.

Fixes: c0f46de30c96 ("net: hns3: fix port base vlan add fail when concurrent with reset")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: split function hclge_update_port_base_vlan_cfg()

[ Upstream commit d25f5eddbe1ace18fa95318fd229b07a64ec4353 ]

Currently the function hclge_update_port_base_vlan_cfg() is a
bit long. Split it to several small functions, to improve the
readability.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/reset: Fix error_state_read ptr + offset use

[ Upstream commit c9b576d0c7bf55aeae1a736da7974fa202c4394d ]

Fix our pointer offset usage in error_state_read
when there is no i915_gpu_coredump but buf offset
is non-zero.

This fixes a kernel page fault can happen when
multiple tests are running concurrently in a loop
and one is producing engine resets and consuming
the i915 error_state dump while the other is
forcing full GT resets. (takes a while to trigger).

The dmesg call trace:

[ 5590.803000] BUG: unable to handle page fault for address:
               ffffffffa0b0e000
[ 5590.803009] #PF: supervisor read access in kernel mode
[ 5590.803013] #PF: error_code(0x0000) - not-present page
[ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067
               PTE 0
[ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U
                    5.17.0-rc5-ups69-guc-err-capt-rev6+ #136
[ 5590.803033] Hardware name: Intel Corporation Alder Lake Client
                    Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00.
                    3031.A02.2201171222 01/17/2022
[ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10
[ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1
                     48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3
                     66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4
                     c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20
                     72 7e 40 38 fe
[ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282
[ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00
               RCX: 0000000000000f8f
[ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000
               RDI: ffff888107ee9071
[ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001
               R09: 0000000000000001
[ 5590.803069] R10: 0000000000000001 R11: 0000000000000002
               R12: 0000000000000019
[ 5590.803073] R13: 0000000000174fff R14: 0000000000001000
               R15: ffff888107ee9000
[ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000)
               knlGS:0000000000000000
[ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004
               CR4: 0000000000770ee0
[ 5590.803089] PKRU: 55555554
[ 5590.803091] Call Trace:
[ 5590.803093] <TASK>
[ 5590.803096] error_state_read+0xa1/0xd0 [i915]
[ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0
[ 5590.803180] new_sync_read+0x116/0x1a0
[ 5590.803185] vfs_read+0x114/0x1b0
[ 5590.803189] ksys_read+0x63/0xe0
[ 5590.803193] do_syscall_64+0x38/0xc0
[ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 5590.803201] RIP: 0033:0x7f62aaea5912
[ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05
                     19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25
                     18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff
                     ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246
               ORIG_RAX: 0000000000000000
[ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000
               RCX: 00007f62aaea5912
[ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f
               RDI: 0000000000000006
[ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010
               R09: 0000000000101000
[ 5590.803229] R10: 0000000000000001 R11: 0000000000000246
               R12: 0000000000000006
[ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010
               R15: 0000000000200000
[ 5590.803238] </TASK>
[ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper
                        drm_kms_helper syscopyarea sysfillrect sysimgblt
                        fb_sys_fops prime_numbers nfnetlink br_netfilter
                        overlay mei_pxp mei_hdcp x86_pkg_temp_thermal
                        coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel
                        snd_intel_dspcfg snd_hda_codec snd_hwdep
                        snd_hda_core snd_pcm mei_me mei fuse ip_tables
                        x_tables crct10dif_pclmul e1000e crc32_pclmul ptp
                        i2c_i801 ghash_clmulni_intel i2c_smbus pps_core
                        [last unloa ded: ttm]
[ 5590.803277] CR2: ffffffffa0b0e000
[ 5590.803280] ---[ end trace 0000000000000000 ]---

Fixes: 0e39037b3165 ("drm/i915: Cache the error string")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311004311.514198-2-alan.previn.teres.alexis@intel.com
(cherry picked from commit 3304033a1e69cd81a2044b4422f0d7e593afb4e6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix races with buffer table unregister

[ Upstream commit d11d31fc5d8a96f707facee0babdcffaafa38de2 ]

Fixed buffer table quiesce might unlock ->uring_lock, potentially
letting new requests to be submitted, don't allow those requests to
use the table as they will race with unregistration.

Reported-and-tested-by: van fantasy <g1042620637@gmail.com>
Fixes: bd54b6fe3316ec ("io_uring: implement fixed buffers registration similar to fixed files")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix races with file table unregister

[ Upstream commit b0380bf6dad4601d92025841e2b7a135d566c6e3 ]

Fixed file table quiesce might unlock ->uring_lock, potentially letting
new requests to be submitted, don't allow those requests to use the
table as they will race with unregistration.

Reported-and-tested-by: van fantasy <g1042620637@gmail.com>
Fixes: 05f3fb3c53975 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: atmel-ssc: Fix IRQ check in ssc_probe

[ Upstream commit 1c245358ce0b13669f6d1625f7a4e05c41f28980 ]

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: eb1f2930609b ("Driver for the Atmel on-chip SSC on AT32AP and AT91")
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220601123026.7119-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: goldfish: Fix free_irq() on remove

[ Upstream commit 499e13aac6c762e1e828172b0f0f5275651d6512 ]

Pass the correct dev_id to free_irq() to fix this splat when the driver
is unbound:

 WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq
 Trying to free already-free IRQ 65
 Call Trace:
  warn_slowpath_fmt
  free_irq
  goldfish_tty_remove
  platform_remove
  device_remove
  device_release_driver_internal
  device_driver_detach
  unbind_store
  drv_attr_store
  ...

Fixes: 465893e18878e119 ("tty: goldfish: support platform_device with id -1")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Drivers: hv: vmbus: Release cpu lock in error case

[ Upstream commit 656c5ba50b7172a0ea25dc1b37606bd51d01fe8d ]

In case of invalid sub channel, release cpu lock before returning.

Fixes: a949e86c0d780 ("Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1654794996-13244-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix call trace in setup_tx_descriptors

[ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ]

After PF reset and ethtool -t there was call trace in dmesg
sometimes leading to panic. When there was some time, around 5
seconds, between reset and test there were no errors.

Problem was that pf reset calls i40e_vsi_close in prep_for_reset
and ethtool -t calls i40e_vsi_close in diag_test. If there was not
enough time between those commands the second i40e_vsi_close starts
before previous i40e_vsi_close was done which leads to crash.

Add check to diag_test if pf is in reset and don't start offline
tests if it is true.
Add netif_info("testing failed") into unhappy path of i40e_diag_test()

Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled")
Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix calculating the number of queue pairs

[ Upstream commit 0bb050670ac90a167ecfa3f9590f92966c9a3677 ]

If ADQ is enabled for a VF, then actual number of queue pair
is a number of currently available traffic classes for this VF.

Without this change the configuration of the Rx/Tx queues
fails with error.

Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix adding ADQ filter to TC0

[ Upstream commit c3238d36c3a2be0a29a9d848d6c51e1b14be6692 ]

Procedure of configure tc flower filters erroneously allows to create
filters on TC0 where unfiltered packets are also directed by default.
Issue was caused by insufficient checks of hw_tc parameter specifying
the hardware traffic class to pass matching packets to.

Fix checking hw_tc parameter which blocks creation of filters on TC0.

Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()

[ Upstream commit 245b993d8f6c4e25f19191edfbd8080b645e12b1 ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
arch/x86/kernel/cpu/mshyperv.c is never compiled as modular.
(CONFIG_HYPERVISOR_GUEST is boolean)

Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: set cl_max_connect when cloning an rpc_clnt

[ Upstream commit 304791255a2dc1c9be7e7c8a6cbdb31b6847b0e5 ]

If the initial attempt at trunking detection using the krb5i auth flavor
fails with -EACCES, -NFS4ERR_CLID_INUSE, or -NFS4ERR_WRONGSEC, then the
NFS client tries again using auth_sys, cloning the rpc_clnt in the
process.  If this second attempt at trunking detection succeeds, then
the resulting nfs_client->cl_rpcclient winds up having cl_max_connect=0
and subsequent attempts to add additional transport connections to the
rpc_clnt will fail with a message similar to the following being logged:

[502044.312640] SUNRPC: reached max allowed number (0) did not add
transport to server: 192.168.122.3

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS: Avoid a live lock condition in pnfs_update_layout()

[ Upstream commit 880265c77ac415090090d1fe72a188fee71cb458 ]

If we're about to send the first layoutget for an empty layout, we want
to make sure that we drain out the existing pending layoutget calls
first. The reason is that these layouts may have been already implicitly
returned to the server by a recall to which the client gave a
NFS4ERR_NOMATCHING_LAYOUT response.

The problem is that wait_var_event_killable() could in principle see the
plh_outstanding count go back to '1' when the first process to wake up
starts sending a new layoutget. If it fails to get a layout, then this
loop can continue ad infinitum...

Fixes: 0b77f97a7e42 ("NFSv4/pnfs: Fix layoutget behaviour after invalidation")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE

[ Upstream commit fe44fb23d6ccde4c914c44ef74ab8d9d9ba02bea ]

If the server tells us that a pNFS layout is not available for a
specific file, then we should not keep pounding it with further
layoutget requests.

Fixes: 183d9e7b112a ("pnfs: rework LAYOUTGET retry handling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8188eu: Fix warning of array overflow in ioctl_linux.c

[ Upstream commit 96f0a54e8e65a765b3a4ad4b53751581f23279f3 ]

Building with -Warray-bounds results in the following warning plus others
related to the same problem:

CC [M]  drivers/staging/r8188eu/os_dep/ioctl_linux.o
In function ‘wpa_set_encryption’,
    inlined from ‘rtw_wx_set_enc_ext’ at drivers/staging/r8188eu/os_dep/ioctl_linux.c:1868:9:
drivers/staging/r8188eu/os_dep/ioctl_linux.c:412:41: warning: array subscript ‘struct ndis_802_11_wep[0]’ is partly outside array bounds of ‘void[25]’ [-Warray-bounds]
  412 |                         pwep->KeyLength = wep_key_len;
      |                         ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
In file included from drivers/staging/r8188eu/os_dep/../include/osdep_service.h:19,
                 from drivers/staging/r8188eu/os_dep/ioctl_linux.c:4:
In function ‘kmalloc’,
    inlined from ‘kzalloc’ at ./include/linux/slab.h:733:9,
    inlined from ‘wpa_set_encryption’ at drivers/staging/r8188eu/os_dep/ioctl_linux.c:408:11,
    inlined from ‘rtw_wx_set_enc_ext’ at drivers/staging/r8188eu/os_dep/ioctl_linux.c:1868:9:
./include/linux/slab.h:605:16: note: object of size [17, 25] allocated by ‘__kmalloc’
  605 |         return __kmalloc(size, flags);
      |                ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/slab.h:600:24: note: object of size [17, 25] allocated by ‘kmem_cache_alloc_trace’
  600 |                 return kmem_cache_alloc_trace(
      |                        ^~~~~~~~~~~~~~~~~~~~~~~
  601 |                                 kmalloc_caches[kmalloc_type(flags)][index],
      |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  602 |                                 flags, size);
      |                                 ~~~~~~~~~~~~

Although it is unlikely that anyone is still using WEP encryption, the
size of the allocation needs to be increased just in case.

Fixes commit 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")

Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220531013103.2175-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8188eu: Use zeroing allocator in wpa_set_encryption()

[ Upstream commit c82462f124df06a0a34793f1a1dafe5c146a2a6f ]

Use zeroing allocator rather than allocator followed by memset with 0.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211012024624.GA1062447@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8188eu: fix rtw_alloc_hwxmits error detection for now

[ Upstream commit 5b7419ae1d208cab1e2826d473d8dab045aa75c7 ]

In _rtw_init_xmit_priv, we use the res variable to store the error
return from the newly converted rtw_alloc_hwxmits function. Sadly, the
calling function interprets res using _SUCCESS and _FAIL still, meaning
we change the semantics of the variable, even in the success case.

This leads to the following on boot:
r8188eu 1-2:1.0: _rtw_init_xmit_priv failed

In the long term, we should reverse these semantics, but for now, this
fixes the driver. Also, inside rtw_alloc_hwxmits remove the if blocks,
as HWXMIT_ENTRY is always 4.

Fixes: f94b47c6bde6 ("staging: r8188eu: add check for kzalloc")
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220521204741.921-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/intel: hid: Add Surface Go to VGBS allow list

[ Upstream commit d4fe9cc4ff8656704b58cfd9363d7c3c9d65e519 ]

The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.

BugLink: https://github.com/linux-surface/linux-surface/issues/837
Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF

[ Upstream commit c6bc7e8ee90845556a90faf8b043cbefd77b8903 ]

Tested and works on my system.

Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/20220608212028.28307-1-git@augustwikerfors.se
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support

[ Upstream commit 8a041afe3e774bedd3e0a9b96f65e48a1299a595 ]

Add dmi_system_id of Gigabyte Z690M AORUS ELITE AX DDR4 board.
Tested on my PC.

Signed-off-by: Piotr Chmura <chmooreck@gmail.com>
Link: https://lore.kernel.org/r/bd83567e-ebf5-0b31-074b-5f6dc7f7c147@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: dwapb: Don't print error on -EPROBE_DEFER

[ Upstream commit 77006f6edc0e0f58617eb25e53731f78641e820d ]

Currently if the APB or Debounce clocks aren't yet ready to be requested
the DW GPIO driver will correctly handle that by deferring the probe
procedure, but the error is still printed to the system log. It needlessly
pollutes the log since there was no real error but a request to postpone
the clock request procedure since the clocks subsystem hasn't been fully
initialized yet. Let's fix that by using the dev_err_probe method to print
the APB/clock request error status. It will correctly handle the deferred
probe situation and print the error if it actually happens.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

random: credit cpu and bootloader seeds by default

[ Upstream commit 846bb97e131d7938847963cca00657c995b1fce1 ]

This commit changes the default Kconfig values of RANDOM_TRUST_CPU and
RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any
existing configs or change any kernel behavior. The reason for this is
several fold.

As background, I recently had an email thread with the kernel
maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine,
SUSE, and Void as recipients. I noted that some distros trust RDRAND,
some trust EFI, and some trust both, and I asked why or why not. There
wasn't really much of a "debate" but rather an interesting discussion of
what the historical reasons have been for this, and it came up that some
distros just missed the introduction of the bootloader Kconfig knob,
while another didn't want to enable it until there was a boot time
switch to turn it off for more concerned users (which has since been
added). The result of the rather uneventful discussion is that every
major Linux distro enables these two options by default.

While I didn't have really too strong of an opinion going into this
thread -- and I mostly wanted to learn what the distros' thinking was
one way or another -- ultimately I think their choice was a decent
enough one for a default option (which can be disabled at boot time).
I'll try to summarize the pros and cons:

Pros:

- The RNG machinery gets initialized super quickly, and there's no
  messing around with subsequent blocking behavior.

- The bootloader mechanism is used by kexec in order for the prior
  kernel to initialize the RNG of the next kernel, which increases
  the entropy available to early boot daemons of the next kernel.

- Previous objections related to backdoors centered around
  Dual_EC_DRBG-like kleptographic systems, in which observing some
  amount of the output stream enables an adversary holding the right key
  to determine the entire output stream.

  This used to be a partially justified concern, because RDRAND output
  was mixed into the output stream in varying ways, some of which may
  have lacked pre-image resistance (e.g. XOR or an LFSR).

  But this is no longer the case. Now, all usage of RDRAND and
  bootloader seeds go through a cryptographic hash function. This means
  that the CPU would have to compute a hash pre-image, which is not
  considered to be feasible (otherwise the hash function would be
  terribly broken).

- More generally, if the CPU is backdoored, the RNG is probably not the
  realistic vector of choice for an attacker.

- These CPU or bootloader seeds are far from being the only source of
  entropy. Rather, there is generally a pretty huge amount of entropy,
  not all of which is credited, especially on CPUs that support
  instructions like RDRAND. In other words, assuming RDRAND outputs all
  zeros, an attacker would *still* have to accurately model every single
  other entropy source also in use.

- The RNG now reseeds itself quite rapidly during boot, starting at 2
  seconds, then 4, then 8, then 16, and so forth, so that other sources
  of entropy get used without much delay.

- Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel
  command line, and paranoid system builders can set the Kconfig options
  to N, so there's no reduction or restriction of optionality.

- It's a practical default.

- All the distros have it set this way. Microsoft and Apple trust it
  too. Bandwagon.

Cons:

- RDRAND *could* still be backdoored with something like a fixed key or
  limited space serial number seed or another indexable scheme like
  that. (However, it's hard to imagine threat models where the CPU is
  backdoored like this, yet people are still okay making *any*
  computations with it or connecting it to networks, etc.)

- RDRAND *could* be defective, rather than backdoored, and produce
  garbage that is in one way or another insufficient for crypto.

- Suggesting a *reduction* in paranoia, as this commit effectively does,
  may cause some to question my personal integrity as a "security
  person".

- Bootloader seeds and RDRAND are generally very difficult if not all
  together impossible to audit.

Keep in mind that this doesn't actually change any behavior. This
is just a change in the default Kconfig value. The distros already are
shipping kernels that set things this way.

Ard made an additional argument in [1]:

    We're at the mercy of firmware and micro-architecture anyway, given
    that we are also relying on it to ensure that every instruction in
    the kernel's executable image has been faithfully copied to memory,
    and that the CPU implements those instructions as documented. So I
    don't think firmware or ISA bugs related to RNGs deserve special
    treatment - if they are broken, we should quirk around them like we
    usually do. So enabling these by default is a step in the right
    direction IMHO.

In [2], Phil pointed out that having this disabled masked a bug that CI
otherwise would have caught:

    A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the
    static key warning (but it does go on to boot). The significant
    difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y
    defining that on top of multi_v7_defconfig demonstrates the issue on
    a clean 5.15.45. Conversely, not setting that option in a
    downstream kernel build avoids the warning

[1] https://lore.kernel.org/lkml/CAMj1kXGi+ieviFjXv9zQBSaGyyzeGW_VpMpTLJK8PJb2QHEQ-w@mail.gmail.com/
[2] https://lore.kernel.org/lkml/c47c42e3-1d56-5859-a6ad-976a1a3381c6@raspberrypi.com/

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.

[ Upstream commit 41e456400212803704e82691716e1d7b0865114a ]

  set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp
  undefined error,fix cpu_hwmon compile options to be bool.Some kernel
  compilation error information is as follows:

  Checking missing-syscalls for N32
  CALL    scripts/checksyscalls.sh
  Checking missing-syscalls for O32
  CALL    scripts/checksyscalls.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  CC [M]  drivers/platform/mips/cpu_hwmon.o
  Building modules, stage 2.
  MODPOST 200 modules
ERROR: "loongson_sysconf" [drivers/platform/mips/cpu_hwmon.ko] undefined!
ERROR: "loongson_chiptemp" [drivers/platform/mips/cpu_hwmon.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92：__modpost] 错误 1
make: *** [Makefile:1261：modules] 错误 2

Signed-off-by: Yupeng Li <liyupeng@zbhlos.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mellanox: mlx5: avoid uninitialized variable warning with gcc-12

[ Upstream commit 842c3b3ddc5f4d17275edbaa09e23d712bf8b915 ]

gcc-12 started warning about 'tracker' being used uninitialized:

  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
    786 |         struct lag_tracker tracker;
        |                            ^~~~~~~

which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.

But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.

This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gcc-12: disable '-Wdangling-pointer' warning for now

[ Upstream commit 49beadbd47c270a00754c107a837b4f29df4c822 ]

While the concept of checking for dangling pointers to local variables
at function exit is really interesting, the gcc-12 implementation is not
compatible with reality, and results in false positives.

For example, gcc sees us putting things on a local list head allocated
on the stack, which involves exactly those kinds of pointers to the
local stack entry:

  In function ‘__list_add’,
      inlined from ‘list_add_tail’ at include/linux/list.h:102:2,
      inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2:
  include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=]
     74 |         new->prev = prev;
        |         ~~~~~~~~~~^~~~~~

But then gcc - understandably - doesn't really understand the big
picture how the doubly linked list works, so doesn't see how we then end
up emptying said list head in a loop and the pointer we added has been
removed.

Gcc also complains about us (intentionally) using this as a way to store
a kind of fake stack trace, eg

  drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=]
     40 |         acpi_gbl_entry_stack_pointer = &current_sp;
        |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~

which is entirely reasonable from a compiler standpoint, and we may want
to change those kinds of patterns, but not not.

So this is one of those "it would be lovely if the compiler were to
complain about us leaving dangling pointers to the stack", but not this
way.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag

[ Upstream commit 2f2c0d2919a14002760f89f4e02960c735a316d2 ]

When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst

Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.

Signed-off-by: Chen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg

[ Upstream commit f638a84afef3dfe10554c51820c16e39a278c915 ]

When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max.

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred

[ Upstream commit 8a4d480702b71184fabcf379b80bf7539716752e ]

Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.

Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.

So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.

Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed

[ Upstream commit a58a7f97ba11391d2d0d408e0b24f38d86ae748e ]

The reference must be released when device_register(&vm_cmdline_parent)
failed. Add the corresponding 'put_device()' in the error handling path.

Signed-off-by: chengkaitao <pilgrimtao@gmail.com>
Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Add HW8326 support

[ Upstream commit 527f4643e03c298c1e3321cfa27866b1374a55e1 ]

Added the support of new Huawei codec HW8326. The HW8326 is developed
by Huawei with Realtek's IP Core, and it's compatible with ALC256.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Link: https://lore.kernel.org/r/20220608082357.26898-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>