Dexuan Cui [Mon, 5 Mar 2018 05:17:14 +0000 (22:17 -0700)]
tools: hv: fix compiler warnings about major/target_fname
[ Upstream commit
1330fc35327f3ecdfa1aa645e7321ced7349b2cd ]
This patch fixes the below warnings with new glibc and gcc:
hv_vss_daemon.c:100:13: warning: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is currently
defined by <sys/types.h> as well, but we plan to remove this soon.
To use "major", include <sys/sysmacros.h> directly.
hv_fcopy_daemon.c:42:2: note: 'snprintf' output between 2 and 1040
bytes into a destination of size 260
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Mon, 5 Mar 2018 10:17:02 +0000 (11:17 +0100)]
drm/bridge: sii902x: Retry status read after DDI I2C
[ Upstream commit
2e7a66a8b5ebf1b04a866e5d7c981640f7f62934 ]
The following happens when connection a DVI output driven
from the SiI9022 using a DVI-to-VGA adapter plug:
i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.
Then no picture. Apparently the I2C engine inside the SiI9022
is not smart enough to try to fall back to DDC I2C. Or the
vendor have not integrated the electronics properly. I don't
know which one it is.
After this, the I2C bus seems stalled and the first attempt to
read the status register fails, and the code returns with
negative return value, and the display fails to initialized.
Instead, retry status readout five times and continue even
if this fails.
Tested on the ARM Versatile Express with a DVI-to-VGA
connector, it now gives picture.
Introduce a helper struct device *dev variable to make
the code more readable.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305101702.13441-1-linus.walleij@linaro.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vivek Gautam [Tue, 16 Jan 2018 10:56:56 +0000 (16:26 +0530)]
phy: qcom-qmp: Fix phy pipe clock gating
[ Upstream commit
f8ba22a39e985c93e278709b1d5f20857a26b49b ]
Pipe clock comes out of the phy and is available as long as
the phy is turned on. Clock controller fails to gate this
clock after the phy is turned off and generates a warning.
/ # [ 33.048561] gcc_usb3_phy_pipe_clk status stuck at 'on'
[ 33.048585] ------------[ cut here ]------------
[ 33.052621] WARNING: CPU: 1 PID: 18 at ../drivers/clk/qcom/clk-branch.c:97 clk_branch_wait+0xf0/0x108
[ 33.057384] Modules linked in:
[ 33.066497] CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G W 4.12.0-rc7-00024-gfe926e34c36d-dirty #96
[ 33.069451] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
...
[ 33.278565] [<
ffff00000849b27c>] clk_branch_wait+0xf0/0x108
[ 33.286375] [<
ffff00000849b2f4>] clk_branch2_disable+0x28/0x34
[ 33.291761] [<
ffff0000084868dc>] clk_core_disable+0x5c/0x88
[ 33.297660] [<
ffff000008487d68>] clk_core_disable_lock+0x20/0x34
[ 33.303129] [<
ffff000008487d98>] clk_disable+0x1c/0x24
[ 33.309384] [<
ffff0000083ccd78>] qcom_qmp_phy_poweroff+0x20/0x48
[ 33.314328] [<
ffff0000083c53f4>] phy_power_off+0x80/0xdc
[ 33.320492] [<
ffff00000875c950>] dwc3_core_exit+0x94/0xa0
[ 33.325784] [<
ffff00000875c9ac>] dwc3_suspend_common+0x50/0x60
[ 33.331080] [<
ffff00000875ca04>] dwc3_runtime_suspend+0x48/0x6c
[ 33.336810] [<
ffff0000085b82f4>] pm_generic_runtime_suspend+0x28/0x38
[ 33.342627] [<
ffff0000085bace0>] __rpm_callback+0x150/0x254
[ 33.349222] [<
ffff0000085bae08>] rpm_callback+0x24/0x78
[ 33.354604] [<
ffff0000085b9fd8>] rpm_suspend+0xe0/0x4e4
[ 33.359813] [<
ffff0000085bb784>] pm_runtime_work+0xdc/0xf0
[ 33.365028] [<
ffff0000080d7b30>] process_one_work+0x12c/0x28c
[ 33.370576] [<
ffff0000080d7ce8>] worker_thread+0x58/0x3b8
[ 33.376393] [<
ffff0000080dd4a8>] kthread+0x100/0x12c
[ 33.381776] [<
ffff0000080836c0>] ret_from_fork+0x10/0x50
Fix this by disabling it as the first thing in phy_exit().
Fixes:
e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 8 Mar 2018 07:26:48 +0000 (08:26 +0100)]
ALSA: vmaster: Propagate slave error
[ Upstream commit
2e2c177ca84aff092c3c96714b0f6a12900f3946 ]
In slave_update() of vmaster code ignores the error from the slave
get() callback and copies the values. It's not only about the missing
error code but also that this may potentially lead to a leak of
uninitialized variables when the slave get() don't clear them.
This patch fixes slave_update() not to copy the potentially
uninitialized values when an error is returned from the slave get()
callback, and to propagate the error value properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Lin [Thu, 11 Jan 2018 02:40:26 +0000 (10:40 +0800)]
phy: rockchip-emmc: retry calpad busy trimming
[ Upstream commit
a4781c2a74b249cad814ceea7272997bbd20051e ]
It turns out that 5us isn't enough for all cases, so let's
retry some more times to wait for caldone.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Gorinov [Wed, 7 Mar 2018 19:46:53 +0000 (11:46 -0800)]
x86/devicetree: Fix device IRQ settings in DT
[ Upstream commit
0a5169add90e43ab45ab1ba34223b8583fcaf675 ]
IRQ parameters for the SoC devices connected directly to I/O APIC lines
(without PCI IRQ routing) may be specified in the Device Tree.
Called from DT IRQ parser, irq_create_fwspec_mapping() calls
irq_domain_alloc_irqs() with a pointer to irq_fwspec structure as @arg.
But x86-specific DT IRQ allocation code casts @arg to of_phandle_args
structure pointer and crashes trying to read the IRQ parameters. The
function was not converted when the mapping descriptor was changed to
irq_fwspec in the generic irqdomain code.
Fixes:
11e4438ee330 ("irqdomain: Introduce a firmware-specific IRQ specifier structure")
Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lkml.kernel.org/r/a234dee27ea60ce76141872da0d6bdb378b2a9ee.1520450752.git.ivan.gorinov@intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Gorinov [Wed, 7 Mar 2018 19:46:29 +0000 (11:46 -0800)]
x86/devicetree: Initialize device tree before using it
[ Upstream commit
628df9dc5ad886b0a9b33c75a7b09710eb859ca1 ]
Commit
08d53aa58cb1 added CRC32 calculation in early_init_dt_verify() and
checking in late initcall of_fdt_raw_init(), making early_init_dt_verify()
mandatory.
The required call to early_init_dt_verify() was not added to the
x86-specific implementation, causing failure to create the sysfs entry in
of_fdt_raw_init().
Fixes:
08d53aa58cb1 ("of/fdt: export fdt blob as /sys/firmware/fdt")
Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lkml.kernel.org/r/c8c7e941efc63b5d25ebf9b6350b0f3df38f6098.1520450752.git.ivan.gorinov@intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Tue, 20 Feb 2018 15:03:24 +0000 (08:03 -0700)]
gfs2: Fix fallocate chunk size
[ Upstream commit
174d1232ebc84fcde8f5889d1171c9c7e74a10a7 ]
The chunk size of allocations in __gfs2_fallocate is calculated
incorrectly. The size can collapse, causing __gfs2_fallocate to
allocate one block at a time, which is very inefficient. This needs
fixing in two places:
In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate
that there is no quota limit. This fixes callers that rely on
ap->allowed to be set even when quotas are off.
In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the
loop to make sure that allocation limits from one resource group won't
spill over into another resource group.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjorn Andersson [Wed, 28 Feb 2018 00:45:25 +0000 (16:45 -0800)]
soc: qcom: wcnss_ctrl: Fix increment in NV upload
[ Upstream commit
90c29ed7627b6b4aeb603ee197650173c8434512 ]
hdr.len includes both the size of the header and the fragment, so using
this when stepping through the firmware causes us to skip 16 bytes every
chunk of 3072 bytes; causing only the first fragment to actually be
valid data.
Instead use fragment size steps through the firmware blob.
Fixes:
ea7a1f275cf0 ("soc: qcom: Introduce WCNSS_CTRL SMD client")
Reported-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilia Lin [Tue, 23 Jan 2018 07:36:18 +0000 (09:36 +0200)]
arm64: dts: qcom: Fix SPI5 config on MSM8996
[ Upstream commit
e723795c702b52cfceb3bb3faa63059eb4658313 ]
Set correct clocks and interrupt values.
Fixes the incorrect SPI master configuration. This is
mandatory to make the SPI5 interface functional.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Mon, 12 Feb 2018 22:20:31 +0000 (14:20 -0800)]
perf/x86/intel: Fix event update for auto-reload
[ Upstream commit
d31fc13fdcb20e1c317f9a7dd6273c18fbd58308 ]
There is a bug when reading event->count with large PEBS enabled.
Here is an example:
# ./read_count
0x71f0
0x122c0
0x1000000001c54
0x100000001257d
0x200000000bdc5
In fixed period mode, the auto-reload mechanism could be enabled for
PEBS events, but the calculation of event->count does not take the
auto-reload values into account.
Anyone who reads event->count will get the wrong result, e.g x86_pmu_read().
This bug was introduced with the auto-reload mechanism enabled since
commit:
851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible")
Introduce intel_pmu_save_and_restart_reload() to calculate the
event->count only for auto-reload.
Since the counter increments a negative counter value and overflows on
the sign switch, giving the interval:
[-period, 0]
the difference between two consequtive reads is:
A) value2 - value1;
when no overflows have happened in between,
B) (0 - value1) + (value2 - (-period));
when one overflow happened in between,
C) (0 - value1) + (n - 1) * (period) + (value2 - (-period));
when @n overflows happened in between.
Here A) is the obvious difference, B) is the extension to the discrete
interval, where the first term is to the top of the interval and the
second term is from the bottom of the next interval and C) the extension
to multiple intervals, where the middle term is the whole intervals
covered.
The equation for all cases is:
value2 - value1 + n * period
Previously the event->count is updated right before the sample output.
But for case A, there is no PEBS record ready. It needs to be specially
handled.
Remove the auto-reload code from x86_perf_event_set_period() since
we'll not longer call that function in this case.
Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Fixes:
851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible")
Link: http://lkml.kernel.org/r/1518474035-21006-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Thu, 1 Mar 2018 17:54:54 +0000 (12:54 -0500)]
perf/x86/intel: Fix large period handling on Broadwell CPUs
[ Upstream commit
f605cfca8c39ffa2b98c06d2b9f30ba64f1e54e3 ]
Large fixed period values could be truncated on Broadwell, for example:
perf record -e cycles -c
10000000000
Here the fixed period is 0x2540BE400, but the period which finally applied is
0x540BE400 - which is wrong.
The reason is that x86_pmu::limit_period() uses an u32 parameter, so the
high 32 bits of 'period' get truncated.
This bug was introduced in:
commit
294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
It's safe to use u64 instead of u32:
- Although the 'left' is s64, the value of 'left' must be positive when
calling limit_period().
- bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch
the higher 32 bits.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes:
294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
Link: http://lkml.kernel.org/r/1519926894-3520-1-git-send-email-kan.liang@linux.intel.com
[ Rewrote unacceptably bad changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 8 Mar 2018 08:00:09 +0000 (08:00 +0000)]
efi/arm*: Only register page tables when they exist
[ Upstream commit
6b31a2fa1e8f7bc6c2a474b4a12dad7a145cf83d ]
Currently the arm/arm64 runtime code registers the runtime servies
pagetables with ptdump regardless of whether runtime services page
tables have been created.
As efi_mm.pgd is NULL in these cases, attempting to dump the efi page
tables results in a NULL pointer dereference in the ptdump code:
/sys/kernel/debug# cat efi_page_tables
[ 479.522600] Unable to handle kernel NULL pointer dereference at virtual address
00000000
[ 479.522715] Mem abort info:
[ 479.522764] ESR = 0x96000006
[ 479.522850] Exception class = DABT (current EL), IL = 32 bits
[ 479.522899] SET = 0, FnV = 0
[ 479.522937] EA = 0, S1PTW = 0
[ 479.528200] Data abort info:
[ 479.528230] ISV = 0, ISS = 0x00000006
[ 479.528317] CM = 0, WnR = 0
[ 479.528317] user pgtable: 4k pages, 48-bit VAs, pgd =
0000000064ab0cb0
[ 479.528449] [
0000000000000000] *pgd=
00000000fbbe4003, *pud=
00000000fb66e003, *pmd=
0000000000000000
[ 479.528600] Internal error: Oops:
96000006 [#1] PREEMPT SMP
[ 479.528664] Modules linked in:
[ 479.528699] CPU: 0 PID: 2457 Comm: cat Not tainted 4.15.0-rc3-00065-g2ad2ee7ecb5c-dirty #7
[ 479.528799] Hardware name: FVP Base (DT)
[ 479.528899] pstate:
00400009 (nzcv daif +PAN -UAO)
[ 479.528941] pc : walk_pgd.isra.1+0x20/0x1d0
[ 479.529011] lr : ptdump_walk_pgd+0x30/0x50
[ 479.529105] sp :
ffff00000bf4bc20
[ 479.529185] x29:
ffff00000bf4bc20 x28:
0000ffff9d22e000
[ 479.529271] x27:
0000000000020000 x26:
ffff80007b4c63c0
[ 479.529358] x25:
00000000014000c0 x24:
ffff80007c098900
[ 479.529445] x23:
ffff00000bf4beb8 x22:
0000000000000000
[ 479.529532] x21:
ffff00000bf4bd70 x20:
0000000000000001
[ 479.529618] x19:
ffff00000bf4bcb0 x18:
0000000000000000
[ 479.529760] x17:
000000000041a1c8 x16:
ffff0000082139d8
[ 479.529800] x15:
0000ffff9d3c6030 x14:
0000ffff9d2527f4
[ 479.529924] x13:
00000000000003f3 x12:
0000000000000038
[ 479.530000] x11:
0000000000000003 x10:
0101010101010101
[ 479.530099] x9 :
0000000017e94050 x8 :
000000000000003f
[ 479.530226] x7 :
0000000000000000 x6 :
0000000000000000
[ 479.530313] x5 :
0000000000000001 x4 :
0000000000000000
[ 479.530416] x3 :
ffff000009069fd8 x2 :
0000000000000000
[ 479.530500] x1 :
0000000000000000 x0 :
0000000000000000
[ 479.530599] Process cat (pid: 2457, stack limit = 0x000000005d1b0e6f)
[ 479.530660] Call trace:
[ 479.530746] walk_pgd.isra.1+0x20/0x1d0
[ 479.530833] ptdump_walk_pgd+0x30/0x50
[ 479.530907] ptdump_show+0x10/0x20
[ 479.530920] seq_read+0xc8/0x470
[ 479.531023] full_proxy_read+0x60/0x90
[ 479.531100] __vfs_read+0x18/0x100
[ 479.531180] vfs_read+0x88/0x160
[ 479.531267] SyS_read+0x48/0xb0
[ 479.531299] el0_svc_naked+0x20/0x24
[ 479.531400] Code:
91400420 f90033a0 a90707a2 f9403fa0 (
f9400000)
[ 479.531499] ---[ end trace
bfe8e28d8acb2b67 ]---
Segmentation fault
Let's avoid this problem by only registering the tables after their
successful creation, which is also less confusing when EFI runtime
services are not in use.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180308080020.22828-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maurizio Lombardi [Fri, 9 Mar 2018 12:59:06 +0000 (13:59 +0100)]
cdrom: do not call check_disk_change() inside cdrom_open()
[ Upstream commit
2bbea6e117357d17842114c65e9a9cf2d13ae8a3 ]
when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.
PID: 6766 TASK:
ffff88007b2a6dd0 CPU: 0 COMMAND: "mount"
#0 [
ffff880078447ae0] __schedule at
ffffffff8168d605
#1 [
ffff880078447b48] schedule_preempt_disabled at
ffffffff8168ed49
#2 [
ffff880078447b58] __mutex_lock_slowpath at
ffffffff8168c995
#3 [
ffff880078447bb8] mutex_lock at
ffffffff8168bdef
#4 [
ffff880078447bd0] sr_block_ioctl at
ffffffffa00b6818 [sr_mod]
#5 [
ffff880078447c10] blkdev_ioctl at
ffffffff812fea50
#6 [
ffff880078447c70] ioctl_by_bdev at
ffffffff8123a8b3
#7 [
ffff880078447c90] isofs_fill_super at
ffffffffa04fb1e1 [isofs]
#8 [
ffff880078447da8] mount_bdev at
ffffffff81202570
#9 [
ffff880078447e18] isofs_mount at
ffffffffa04f9828 [isofs]
#10 [
ffff880078447e28] mount_fs at
ffffffff81202d09
#11 [
ffff880078447e70] vfs_kern_mount at
ffffffff8121ea8f
#12 [
ffff880078447ea8] do_mount at
ffffffff81220fee
#13 [
ffff880078447f28] sys_mount at
ffffffff812218d6
#14 [
ffff880078447f80] system_call_fastpath at
ffffffff81698c49
RIP:
00007fd9ea914e9a RSP:
00007ffd5d9bf648 RFLAGS:
00010246
RAX:
00000000000000a5 RBX:
ffffffff81698c49 RCX:
0000000000000010
RDX:
00007fd9ec2bc210 RSI:
00007fd9ec2bc290 RDI:
00007fd9ec2bcf30
RBP:
0000000000000000 R8:
0000000000000000 R9:
0000000000000010
R10:
00000000c0ed0001 R11:
0000000000000206 R12:
00007fd9ec2bc040
R13:
00007fd9eb6b2380 R14:
00007fd9ec2bc210 R15:
00007fd9ec2bcf30
ORIG_RAX:
00000000000000a5 CS: 0033 SS: 002b
This task was trying to mount the cdrom. It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.
PID: 6785 TASK:
ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd"
#0 [
ffff880078417898] __schedule at
ffffffff8168d605
#1 [
ffff880078417900] schedule at
ffffffff8168dc59
#2 [
ffff880078417910] rwsem_down_read_failed at
ffffffff8168f605
#3 [
ffff880078417980] call_rwsem_down_read_failed at
ffffffff81328838
#4 [
ffff8800784179d0] down_read at
ffffffff8168cde0
#5 [
ffff8800784179e8] get_super at
ffffffff81201cc7
#6 [
ffff880078417a10] __invalidate_device at
ffffffff8123a8de
#7 [
ffff880078417a40] flush_disk at
ffffffff8123a94b
#8 [
ffff880078417a88] check_disk_change at
ffffffff8123ab50
#9 [
ffff880078417ab0] cdrom_open at
ffffffffa00a29e1 [cdrom]
#10 [
ffff880078417b68] sr_block_open at
ffffffffa00b6f9b [sr_mod]
#11 [
ffff880078417b98] __blkdev_get at
ffffffff8123ba86
#12 [
ffff880078417bf0] blkdev_get at
ffffffff8123bd65
#13 [
ffff880078417c78] blkdev_open at
ffffffff8123bf9b
#14 [
ffff880078417c90] do_dentry_open at
ffffffff811fc7f7
#15 [
ffff880078417cd8] vfs_open at
ffffffff811fc9cf
#16 [
ffff880078417d00] do_last at
ffffffff8120d53d
#17 [
ffff880078417db0] path_openat at
ffffffff8120e6b2
#18 [
ffff880078417e48] do_filp_open at
ffffffff8121082b
#19 [
ffff880078417f18] do_sys_open at
ffffffff811fdd33
#20 [
ffff880078417f70] sys_open at
ffffffff811fde4e
#21 [
ffff880078417f80] system_call_fastpath at
ffffffff81698c49
RIP:
00007f29438b0c20 RSP:
00007ffc76624b78 RFLAGS:
00010246
RAX:
0000000000000002 RBX:
ffffffff81698c49 RCX:
0000000000000000
RDX:
00007f2944a5fa70 RSI:
00000000000a0800 RDI:
00007f2944a5fa70
RBP:
00007f2944a5f540 R8:
0000000000000000 R9:
0000000000000020
R10:
00007f2943614c40 R11:
0000000000000246 R12:
ffffffff811fde4e
R13:
ffff880078417f78 R14:
000000000000000c R15:
00007f2944a4b010
ORIG_RAX:
0000000000000002 CS: 0033 SS: 002b
This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.
The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.
This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Tue, 20 Feb 2018 10:11:50 +0000 (02:11 -0800)]
perf/x86/intel: Properly save/restore the PMU state in the NMI handler
[ Upstream commit
82d71ed0277efc45360828af8c4e4d40e1b45352 ]
The PMU is disabled in intel_pmu_handle_irq(), but cpuc->enabled is not updated
accordingly.
This is fine in current usage because no-one checks it - but fix it
for future code: for example, the drain_pebs() will be modified to
fix an auto-reload bug.
Properly save/restore the old PMU state.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: kernel test robot <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/6f44ee84-56f8-79f1-559b-08e371eaeb78@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 11 Mar 2018 01:55:47 +0000 (17:55 -0800)]
hwmon: (pmbus/adm1275) Accept negative page register values
[ Upstream commit
ecb29abd4cb0670c616fb563a078f25d777ce530 ]
A negative page register value means that no page needs to be
selected. This is used by status register read operations and needs
to be accepted. The failure to do so so results in missed status
and limit registers.
Fixes:
da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 11 Mar 2018 01:49:47 +0000 (17:49 -0800)]
hwmon: (pmbus/max8688) Accept negative page register values
[ Upstream commit
a46f8cd696624ef757be0311eb28f119c36778e8 ]
A negative page register value means that no page needs to be
selected. This is used by status register evaluations and needs
to be accepted.
Fixes:
da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Anholt [Fri, 9 Mar 2018 23:33:32 +0000 (15:33 -0800)]
drm/panel: simple: Fix the bus format for the Ontat panel
[ Upstream commit
5651e5e094591f479adad5830ac1bc45196a39b3 ]
This fixes bad color output. When I was first testing the device I
had the DPI hardware set to 666 mode, but apparently in the refactor
to use the bus_format information from the panel driver, I failed to
actually update the panel.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes:
e8b6f561b2ee ("drm/panel: simple: Add the 7" DPI panel from Adafruit")
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309233332.1769-1-eric@anholt.net
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Fri, 9 Mar 2018 11:52:04 +0000 (12:52 +0100)]
perf/core: Fix perf_output_read_group()
[ Upstream commit
9e5b127d6f33468143d90c8a45ca12410e4c3fa7 ]
Mark reported his arm64 perf fuzzer runs sometimes splat like:
armv8pmu_read_counter+0x1e8/0x2d8
armpmu_event_update+0x8c/0x188
armpmu_read+0xc/0x18
perf_output_read+0x550/0x11e8
perf_event_read_event+0x1d0/0x248
perf_event_exit_task+0x468/0xbb8
do_exit+0x690/0x1310
do_group_exit+0xd0/0x2b0
get_signal+0x2e8/0x17a8
do_signal+0x144/0x4f8
do_notify_resume+0x148/0x1e8
work_pending+0x8/0x14
which asserts that we only call pmu::read() on ACTIVE events.
The above callchain does:
perf_event_exit_task()
perf_event_exit_task_context()
task_ctx_sched_out() // INACTIVE
perf_event_exit_event()
perf_event_set_state(EXIT) // EXIT
sync_child_event()
perf_event_read_event()
perf_output_read()
perf_output_read_group()
leader->pmu->read()
Which results in doing a pmu::read() on an !ACTIVE event.
I _think_ this is 'new' since we added attr.inherit_stat, which added
the perf_event_read_event() to the exit path, without that
perf_event_read_output() would only trigger from samples and for
@event to trigger a sample, it's leader _must_ be ACTIVE too.
Still, adding this check makes it consistent with the @sub case for
the siblings.
Reported-and-Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pierre Bourdon [Tue, 20 Feb 2018 15:03:18 +0000 (16:03 +0100)]
max17042: propagate of_node to power supply device
[ Upstream commit
66ec32fc7cd116dab5c02603ea8ec28ff92da3b5 ]
max17042_get_status uses the core power_supply_am_i_supplied. That
function relies on DT properties to figure out the power supply
topology, and will error out without DT.
Fixes max17042 battery status being reported as "unknown".
Signed-off-by: Pierre Bourdon <delroth@google.com>
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
leilei.lin [Tue, 6 Mar 2018 09:36:37 +0000 (17:36 +0800)]
perf/core: Fix installing cgroup events on CPU
[ Upstream commit
33801b94741d6c3be9713c10aa627477216c21e2 ]
There's two problems when installing cgroup events on CPUs: firstly
list_update_cgroup_event() only tries to set cpuctx->cgrp for the
first event, if that mismatches on @cgrp we'll not try again for later
additions.
Secondly, when we install a cgroup event into an active context, only
issue an event reprogram when the event matches the current cgroup
context. This avoids a pointless event reprogramming.
Signed-off-by: leilei.lin <leilei.lin@alibaba-inc.com>
[ Improved the changelog and comments. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: brendan.d.gregg@gmail.com
Cc: eranian@gmail.com
Cc: linux-kernel@vger.kernel.org
Cc: yang_oliver@hotmail.com
Link: http://lkml.kernel.org/r/20180306093637.28247-1-linxiulei@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Sat, 27 Jan 2018 09:29:49 +0000 (17:29 +0800)]
f2fs: fix to check extent cache in f2fs_drop_extent_tree
[ Upstream commit
bf617f7a92edc6bb2909db2bfa4576f50b280ee5 ]
If noextent_cache mount option is on, we will never initialize extent tree
in inode, but still we're going to access it in f2fs_drop_extent_tree,
result in kernel panic as below:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000038
IP: _raw_write_lock+0xc/0x30
Call Trace:
? f2fs_drop_extent_tree+0x41/0x70 [f2fs]
f2fs_fallocate+0x5a0/0xdd0 [f2fs]
? common_file_perm+0x47/0xc0
? apparmor_file_permission+0x1a/0x20
vfs_fallocate+0x15b/0x290
SyS_fallocate+0x44/0x70
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
This patch fixes to check extent cache status before using in
f2fs_drop_extent_tree.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Wed, 31 Jan 2018 01:30:34 +0000 (09:30 +0800)]
f2fs: fix to clear CP_TRIMMED_FLAG
[ Upstream commit
cd36d7a17f9da68be9aa67185ba3ad7969934a19 ]
Once CP_TRIMMED_FLAG is set, after a reboot, we will never issue discard
before LBA becomes invalid again, fix it by clearing the flag in
checkpoint without CP_TRIMMED reason.
Fixes:
1f43e2ad7bff ("f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Sun, 25 Feb 2018 15:38:21 +0000 (23:38 +0800)]
f2fs: fix to set KEEP_SIZE bit in f2fs_zero_range
[ Upstream commit
17cd07ae95073c298af92c1ba14ac58ce84de33b ]
As Jayashree Mohan reported:
A simple workload to reproduce this would be :
1. create foo
2. Write (8K - 16K) // foo size = 16K now
3. fsync()
4. falloc zero_range , keep_size (4202496 - 4210688) // foo size must be 16K
5. fdatasync()
Crash now
On recovery, we see that the file size is 4210688 and not 16K, which
violates the semantics of keep_size flag. We have a test case to
reproduce this using CrashMonkey on 4.15 kernel. Try this out by
simply running :
./c_harness -f /dev/sda -d /dev/cow_ram0 -t f2fs -e 102400 -P -v
tests/generic_468_zero.so
The root cause is that we miss to set KEEP_SIZE bit correctly in zero_range
when zeroing block cross EOF with FALLOC_FL_KEEP_SIZE, let's fix this
missing case.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaibhav Jain [Thu, 15 Feb 2018 15:49:24 +0000 (21:19 +0530)]
cxl: Check if PSL data-cache is available before issue flush request
[ Upstream commit
94322ed8e857e3b2a33cf75118051af9baaa110f ]
PSL9D doesn't have a data-cache that needs to be flushed before
resetting the card. However when cxl tries to flush data-cache on such
a card, it times-out as PSL_Control register never indicates flush
operation complete due to missing data-cache. This is usually
indicated in the kernel logs with this message:
"WARNING: cache flush timed out"
To fix this the patch checks PSL_Debug register CDC-Field(BIT:27)
which indicates the absence of a data-cache and sets a flag
'no_data_cache' in 'struct cxl_native' to indicate this. When
cxl_data_cache_flush() is called it checks the flag and if set bails
out early without requesting a data-cache flush operation to the PSL.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alistair Popple [Fri, 2 Mar 2018 05:18:45 +0000 (16:18 +1100)]
powerpc/powernv/npu: Fix deadlock in mmio_invalidate()
[ Upstream commit
2b74e2a9b39df40a2b489af2d24079617c61ee0e ]
When sending TLB invalidates to the NPU we need to send extra flushes due
to a hardware issue. The original implementation would lock the all the
ATSD MMIO registers sequentially before unlocking and relocking each of
them sequentially to do the extra flush.
This introduced a deadlock as it is possible for one thread to hold one
ATSD register whilst waiting for another register to be freed while the
other thread is holding that register waiting for the one in the first
thread to be freed.
For example if there are two threads and two ATSD registers:
Thread A Thread B
----------------------
Acquire 1
Acquire 2
Release 1 Acquire 1
Wait 1 Wait 2
Both threads will be stuck waiting to acquire a register resulting in an
RCU stall warning or soft lockup.
This patch solves the deadlock by refactoring the code to ensure registers
are not released between flushes and to ensure all registers are either
acquired or released together and in order.
Fixes:
bbd5ff50afff ("powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Malaterre [Sun, 25 Feb 2018 17:22:29 +0000 (18:22 +0100)]
powerpc: Add missing prototype for arch_irq_work_raise()
[ Upstream commit
f5246862f82f1e16bbf84cda4cddf287672b30fe ]
In commit
4f8b50bbbe63 ("irq_work, ppc: Fix up arch hooks") a new
function arch_irq_work_raise() was added without a prototype in header
irq_work.h.
Fix the following warning (treated as error in W=1):
arch/powerpc/kernel/time.c:523:6: error: no previous prototype for ‘arch_irq_work_raise’
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Mon, 12 Mar 2018 20:15:08 +0000 (21:15 +0100)]
drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'
[ Upstream commit
e770f6bf18182bc3af6ceec30189b6c323cbc157 ]
'drm_vblank_init()' can fail. So handle this (unlikely) error.
Fixes:
bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6cbf3d70ac3904489c7194c895225c4103aebb96.1520885192.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Mon, 12 Mar 2018 20:15:10 +0000 (21:15 +0100)]
drm/meson: Fix some error handling paths in 'meson_drv_bind_master()'
[ Upstream commit
2c18107b9d58972588cd45d89b8f58d0f033c110 ]
If one of these functions fail, we whould free 'drm', as alreadry done in
the other error handling paths, below and above.
Fixes:
bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df47e03d36c2cf7bc37ec3105fc47c16555bd946.1520885192.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kamlakant Patel [Tue, 13 Mar 2018 11:02:27 +0000 (16:32 +0530)]
ipmi_ssif: Fix kernel panic at msg_done_handler
[ Upstream commit
f002612b9d86613bc6fde0a444e0095225f6053e ]
This happens when BMC doesn't return any data and the code is trying
to print the value of data[2].
Getting following crash:
[ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address
00000002
[ 484.736496] pgd =
ffff0000094a2000
[ 484.739885] [
00000002] *pgd=
00000047fcffe003, *pud=
00000047fcffd003, *pmd=
0000000000000000
[ 484.748158] Internal error: Oops:
96000005 [#1] SMP
[...]
[ 485.101451] Call trace:
[...]
[ 485.188473] [<
ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif]
[ 485.195249] [<
ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif]
[ 485.202038] [<
ffff0000080f1430>] kthread+0x108/0x138
[ 485.206994] [<
ffff0000080838e0>] ret_from_fork+0x10/0x30
[ 485.212294] Code:
aa1903e1 aa1803e0 b900227f 95fef6a5 (
39400aa3)
Adding a check to validate the data len before printing data[2] to fix this issue.
Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Milton Miller [Fri, 9 Mar 2018 21:58:19 +0000 (15:58 -0600)]
watchdog: aspeed: Fix translation of reset mode to ctrl register
[ Upstream commit
d2fc8db691bf3197d43b2afb553311a9bf257bff ]
Assert RESET_SYSTEM bit for any reset and set MODE field from reset
type.
The watchdog control register has a RESET_SYSTEM bit that is really
closer to activate a reset, and RESET_SYSTEM_MODE field that chooses
how much to reset.
Before this patch, a node without these optional property would do a
SOC reset, but a node with properties requesting a cpu or SOC reset
would do nothing and a node requesting a system reset would do a
SOC reset.
Fixes:
b7f0b8ad25f3 ("drivers/watchdog: ASPEED reference dev tree properties for config")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Sat, 10 Mar 2018 03:46:06 +0000 (19:46 -0800)]
watchdog: dw: RMW the control register
[ Upstream commit
a81abbb412341e9e3b2d42ed7d310cf71fbb84a8 ]
RK3399 has rst_pulse_length in CONTROL_REG[4:2], determining the length
of pulse to issue for system reset. We shouldn't clobber this value,
because that might make the system reset ineffective. On RK3399, we're
seeing that a value of 000b (meaning 2 cycles) yields an unreliable
(partial?) reset, and so we only fully reset after the watchdog fires a
second time. If we retain the system default (010b, or 8 clock cycles),
then the watchdog reset is much more reliable.
Read-modify-write retains the system value and improves reset
reliability.
It seems we were intentionally clobbering the response mode previously,
to ensure we performed a system reset (we don't support an interrupt
notification), so retain that explicitly.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Sat, 3 Mar 2018 09:53:24 +0000 (10:53 +0100)]
PCI: Restore config space on runtime resume despite being unbound
[ Upstream commit
5775b843a619b3c93f946e2b55a208d9f0f48b59 ]
We leave PCI devices not bound to a driver in D0 during runtime suspend.
But they may have a parent which is bound and can be transitioned to
D3cold at runtime. Once the parent goes to D3cold, the unbound child
may go to D3cold as well. When the child goes to D3cold, its internal
state, including configuration of BARs, MSI, ASPM, MPS, etc., is lost.
One example are recent hybrid graphics laptops which cut power to the
discrete GPU when the root port above it goes to ACPI power state D3.
Users may provoke this by unbinding the GPU driver and allowing runtime
PM on the GPU via sysfs: The PM core will then treat the GPU as
"suspended", which in turn allows the root port to runtime suspend,
causing the power resources listed in its _PR3 object to be powered off.
The GPU's BARs will be uninitialized when a driver later probes it.
Another example are hybrid graphics laptops where the GPU itself (rather
than the root port) is capable of runtime suspending to D3cold. If the
GPU's integrated HDA controller is not bound and the GPU's driver
decides to runtime suspend to D3cold, the HDA controller's BARs will be
uninitialized when a driver later probes it.
Fix by saving and restoring config space over a runtime suspend cycle
even if the device is not bound.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus
Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[lukas: add commit message, bikeshed code comments for clarity]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/92fb6e6ae2730915eb733c08e2f76c6a313e3860.1520068884.git.lukas@wunner.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Kresin [Thu, 11 May 2017 06:18:24 +0000 (08:18 +0200)]
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
[ Upstream commit
05454c1bde91fb013c0431801001da82947e6b5a ]
According to the QCA u-boot source the "PCIE Phase Lock Loop
Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
QCA955X and QCA956X at offset 0x10.
Since the PCIE PLL config register is only defined for the AR724x fix
only this value. The value is wrong since the day it was added and isn't
used by any driver yet.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16048/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ursula Braun [Wed, 14 Mar 2018 10:01:00 +0000 (11:01 +0100)]
net/smc: pay attention to MAX_ORDER for CQ entries
[ Upstream commit
c9f4c6cf53bfafb639386a4c094929f13f573e04 ]
smc allocates a certain number of CQ entries for used RoCE devices. For
mlx5 devices the chosen constant number results in a large allocation
causing this warning:
[13355.124656] WARNING: CPU: 3 PID: 16535 at mm/page_alloc.c:3883 __alloc_pages_nodemask+0x2be/0x10c0
[13355.124657] Modules linked in: smc_diag(O) smc(O) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ip6table_filter ip6_tables iptable_filter mlx5_ib ib_core sunrpc mlx5_core s390_trng rng_core ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common ptp pps_core eadm_sch dm_multipath dm_mod vhost_net tun vhost tap sch_fq_codel kvm ip_tables x_tables autofs4 [last unloaded: smc]
[13355.124672] CPU: 3 PID: 16535 Comm: kworker/3:0 Tainted: G O 4.14.0uschi #1
[13355.124673] Hardware name: IBM 3906 M04 704 (LPAR)
[13355.124675] Workqueue: events smc_listen_work [smc]
[13355.124677] task:
00000000e2f22100 task.stack:
0000000084720000
[13355.124678] Krnl PSW :
0704c00180000000 000000000029da76 (__alloc_pages_nodemask+0x2be/0x10c0)
[13355.124681] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[13355.124682] Krnl GPRS:
0000000000000000 00550e00014080c0 0000000000000000 0000000000000001
[13355.124684]
000000000029d8b6 00000000f3bfd710 0000000000000000 00000000014080c0
[13355.124685]
0000000000000009 00000000ec277a00 0000000000200000 0000000000000000
[13355.124686]
0000000000000000 00000000000001ff 000000000029d8b6 0000000084723720
[13355.124708] Krnl Code:
000000000029da6a:
a7110200 tmll %r1,512
000000000029da6e:
a774ff29 brc 7,29d8c0
#
000000000029da72:
a7f40001 brc 15,29da74
>
000000000029da76:
a7f4ff25 brc 15,29d8c0
000000000029da7a:
a7380000 lhi %r3,0
000000000029da7e:
a7f4fef1 brc 15,29d860
000000000029da82:
5820f0c4 l %r2,196(%r15)
000000000029da86:
a53e0048 llilh %r3,72
[13355.124720] Call Trace:
[13355.124722] ([<
000000000029d8b6>] __alloc_pages_nodemask+0xfe/0x10c0)
[13355.124724] [<
000000000013bd1e>] s390_dma_alloc+0x6e/0x148
[13355.124733] [<
000003ff802eeba6>] mlx5_dma_zalloc_coherent_node+0x8e/0xe0 [mlx5_core]
[13355.124740] [<
000003ff802eee18>] mlx5_buf_alloc_node+0x70/0x108 [mlx5_core]
[13355.124744] [<
000003ff804eb410>] mlx5_ib_create_cq+0x558/0x898 [mlx5_ib]
[13355.124749] [<
000003ff80407d40>] ib_create_cq+0x48/0x88 [ib_core]
[13355.124751] [<
000003ff80109fba>] smc_ib_setup_per_ibdev+0x52/0x118 [smc]
[13355.124753] [<
000003ff8010bcb6>] smc_conn_create+0x65e/0x728 [smc]
[13355.124755] [<
000003ff801081a2>] smc_listen_work+0x2d2/0x540 [smc]
[13355.124756] [<
0000000000162c66>] process_one_work+0x1be/0x440
[13355.124758] [<
0000000000162f40>] worker_thread+0x58/0x458
[13355.124759] [<
0000000000169e7e>] kthread+0x14e/0x168
[13355.124760] [<
00000000009ce8be>] kernel_thread_starter+0x6/0xc
[13355.124762] [<
00000000009ce8b8>] kernel_thread_starter+0x0/0xc
[13355.124762] Last Breaking-Event-Address:
[13355.124764] [<
000000000029da72>] __alloc_pages_nodemask+0x2ba/0x10c0
[13355.124764] ---[ end trace
34be38b581c0b585 ]---
This patch reduces the smc constant for the maximum number of allocated
completion queue entries SMC_MAX_CQE by 2 to avoid high round up values
in the mlx5 code, and reduces the number of allocated completion queue
entries even more, if the final allocation for an mlx5 device hits the
MAX_ORDER limit.
Reported-by: Ihnken Menssen <menssen@de.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Jaillet [Tue, 13 Mar 2018 18:36:58 +0000 (19:36 +0100)]
spi: bcm-qspi: fIX some error handling paths
[ Upstream commit
bc3cc75281b3c2b1c5355d88d147b66a753bb9a5 ]
For some reason, commit
c0368e4db4a3 ("spi: bcm-qspi: Fix use after free
in bcm_qspi_probe() in error path") has updated some gotos, but not all of
them.
This looks spurious, so fix it.
Fixes:
fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Jaillet [Tue, 13 Mar 2018 20:33:11 +0000 (21:33 +0100)]
regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'
[ Upstream commit
ed8cffda27dea6fd3dafb3ee881c5a786edac9ca ]
Re-order error handling code and gotos to avoid leaks in error handling
paths.
Fixes:
9f946099fe19 ("regulator: gpio: fix parsing of gpio list")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Yan [Tue, 13 Mar 2018 17:24:30 +0000 (11:24 -0600)]
coresight: Use %px to print pcsr instead of %p
[ Upstream commit
831c326fcd0e8e2a6ece952f898a1ec9b1dc1004 ]
Commit
ad67b74d2469 ("printk: hash addresses printed with %p") lets
printk specifier %p to hash all addresses before printing, this was
resulting in the high 32 bits of pcsr can only output zeros. So
module cannot completely print pc value and it's pointless for debugging
purpose.
This patch fixes this by using %px to print pcsr instead.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oded Gabbay [Thu, 15 Mar 2018 08:08:35 +0000 (10:08 +0200)]
drm/amdkfd: add missing include of mm.h
[ Upstream commit
7420f482ea5163bf6dae39a5c7628d5397cd6307 ]
This patch fixes kernel build in ARCH=frv
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parav Pandit [Tue, 13 Mar 2018 14:06:14 +0000 (16:06 +0200)]
IB/core: Honor port_num while resolving GID for IB link layer
[ Upstream commit
563c4ba3bd2b8b0b21c65669ec2226b1cfa1138b ]
ah_attr contains the port number to which cm_id is bound. However, while
searching for GID table for matching GID entry, the port number is
ignored.
This could cause the wrong GID to be used when the ah_attr is converted to
an AH.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Richter [Thu, 8 Mar 2018 14:57:35 +0000 (15:57 +0100)]
perf stat: Fix core dump when flag T is used
[ Upstream commit
fca32340a5e8b896f57d41fd94b8b1701df25eb1 ]
Executing command 'perf stat -T -- ls' dumps core on x86 and s390.
Here is the call back chain (done on x86):
# gdb ./perf
....
(gdb) r stat -T -- ls
...
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6
(gdb) where
#0 0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6
#1 0x00007ffff56ae484 in asprintf () from /lib64/libc.so.6
#2 0x00000000004f1982 in __parse_events_add_pmu (parse_state=0x7fffffffd580,
list=0xbfb970, name=0xbf3ef0 "cpu",
head_config=0xbfb930, auto_merge_stats=false) at util/parse-events.c:1233
#3 0x00000000004f1c8e in parse_events_add_pmu (parse_state=0x7fffffffd580,
list=0xbfb970, name=0xbf3ef0 "cpu",
head_config=0xbfb930) at util/parse-events.c:1288
#4 0x0000000000537ce3 in parse_events_parse (_parse_state=0x7fffffffd580,
scanner=0xbf4210) at util/parse-events.y:234
#5 0x00000000004f2c7a in parse_events__scanner (str=0x6b66c0
"task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}",
parse_state=0x7fffffffd580, start_token=258) at util/parse-events.c:1673
#6 0x00000000004f2e23 in parse_events (evlist=0xbe9990, str=0x6b66c0
"task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}", err=0x0)
at util/parse-events.c:1713
#7 0x000000000044e137 in add_default_attributes () at builtin-stat.c:2281
#8 0x000000000044f7b5 in cmd_stat (argc=1, argv=0x7fffffffe3b0) at
builtin-stat.c:2828
#9 0x00000000004c8b0f in run_builtin (p=0xab01a0 <commands+288>, argc=4,
argv=0x7fffffffe3b0) at perf.c:297
#10 0x00000000004c8d7c in handle_internal_command (argc=4,
argv=0x7fffffffe3b0) at perf.c:349
#11 0x00000000004c8ece in run_argv (argcp=0x7fffffffe20c,
argv=0x7fffffffe200) at perf.c:393
#12 0x00000000004c929c in main (argc=4, argv=0x7fffffffe3b0) at perf.c:537
(gdb)
It turns out that a NULL pointer is referenced. Here are the
function calls:
...
cmd_stat()
+---> add_default_attributes()
+---> parse_events(evsel_list, transaction_attrs, NULL);
3rd parameter set to NULL
Function parse_events(xx, xx, struct parse_events_error *err) dives
into a bison generated scanner and creates
parser state information for it first:
struct parse_events_state parse_state = {
.list = LIST_HEAD_INIT(parse_state.list),
.idx = evlist->nr_entries,
.error = err, <--- NULL POINTER !!!
.evlist = evlist,
};
Now various functions inside the bison scanner are called to end up in
__parse_events_add_pmu(struct parse_events_state *parse_state, ..) with
first parameter being a pointer to above structure definition.
Now the PMU event name is not found (because being executed in a VM) and
this function tries to create an error message with
asprintf(&parse_state->error.str, ....)
which references a NULL pointer and dumps core.
Fix this by providing a pointer to the necessary error information
instead of NULL. Technically only the else part is needed to avoid the
core dump, just lets be safe...
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180308145735.64717-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yisheng Xie [Mon, 12 Mar 2018 11:25:56 +0000 (19:25 +0800)]
perf top: Fix top.call-graph config option reading
[ Upstream commit
a3a4a3b37c9b911af4c375b2475cea0fd2b84d38 ]
When trying to add the "call-graph" variable for top into the
.perfconfig file, like:
[top]
call-graph = fp
I that perf_top_config() do not parse this variable.
Fix it by calling perf_default_config() when the top.call-graph variable
is set.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
b8cbb349061e ("perf config: Bring perf_default_config to the very beginning at main()")
Link: http://lkml.kernel.org/r/1520853957-36106-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Fri, 9 Feb 2018 13:01:33 +0000 (14:01 +0100)]
KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use
[ Upstream commit
0bcc3fb95b97ac2ca223a5a870287b37f56265ac ]
Devices which use level-triggered interrupts under Windows 2016 with
Hyper-V role enabled don't work: Windows disables EOI broadcast in SPIV
unconditionally. Our in-kernel IOAPIC implementation emulates an old IOAPIC
version which has no EOI register so EOI never happens.
The issue was discovered and discussed a while ago:
https://www.spinics.net/lists/kvm/msg148098.html
While this is a guest OS bug (it should check that IOAPIC has the required
capabilities before disabling EOI broadcast) we can workaround it in KVM:
advertising DIRECTED_EOI with in-kernel IOAPIC makes little sense anyway.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregory CLEMENT [Wed, 14 Mar 2018 17:03:40 +0000 (18:03 +0100)]
i2c: mv64xxx: Apply errata delay only in standard mode
[ Upstream commit
31184d8c6ea49ea0676d100cdd7e1f102ad025b5 ]
The errata FE-8471889 description has been updated. There is still a
timing violation for repeated start. But the errata now states that it
was only the case for the Standard mode (100 kHz), in Fast mode (400 kHz)
there is no issue.
This patch limit the errata fix to the Standard mode.
It has been tesed successfully on the clearfog (Aramda 388 based board).
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arjun Vynipadath [Thu, 15 Mar 2018 12:04:14 +0000 (17:34 +0530)]
cxgb4: Fix queue free path of ULD drivers
[ Upstream commit
d7cb44496a9bb458632cb3c18acb08949c210448 ]
Setting sge_uld_rxq_info to NULL in free_queues_uld().
We are referencing sge_uld_rxq_info in cxgb_up(). This
will fix a panic when interface is brought up after a
ULDq creation failure.
Fixes:
94cdb8bb993a (cxgb4: Add support for dynamic allocation
of resources for ULD)
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudhar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Seunghun Han [Wed, 14 Mar 2018 23:12:56 +0000 (16:12 -0700)]
ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
[ Upstream commit
97f3c0a4b0579b646b6b10ae5a3d59f0441cc12c ]
I found an ACPI cache leak in ACPI early termination and boot continuing case.
When early termination occurs due to malicious ACPI table, Linux kernel
terminates ACPI function and continues to boot process. While kernel terminates
ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak.
Boot log of ACPI operand cache leak is as follows:
>[ 0.464168] ACPI: Added _OSI(Module Device)
>[ 0.467022] ACPI: Added _OSI(Processor Device)
>[ 0.469376] ACPI: Added _OSI(3.0 _SCP Extensions)
>[ 0.471647] ACPI: Added _OSI(Processor Aggregator Device)
>[ 0.477997] ACPI Error: Null stack entry at
ffff880215c0aad8 (
20170303/exresop-174)
>[ 0.482706] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (
20170303/dswexec-461)
>[ 0.487503] ACPI Error: Method parse/execution failed [\DBG] (Node
ffff88021710ab40), AE_AML_INTERNAL (
20170303/psparse-543)
>[ 0.492136] ACPI Error: Method parse/execution failed [\_SB._INI] (Node
ffff88021710a618), AE_AML_INTERNAL (
20170303/psparse-543)
>[ 0.497683] ACPI: Interpreter enabled
>[ 0.499385] ACPI: (supports S0)
>[ 0.501151] ACPI: Using IOAPIC for interrupt routing
>[ 0.503342] ACPI Error: Null stack entry at
ffff880215c0aad8 (
20170303/exresop-174)
>[ 0.506522] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (
20170303/dswexec-461)
>[ 0.510463] ACPI Error: Method parse/execution failed [\DBG] (Node
ffff88021710ab40), AE_AML_INTERNAL (
20170303/psparse-543)
>[ 0.514477] ACPI Error: Method parse/execution failed [\_PIC] (Node
ffff88021710ab18), AE_AML_INTERNAL (
20170303/psparse-543)
>[ 0.518867] ACPI Exception: AE_AML_INTERNAL, Evaluating _PIC (
20170303/bus-991)
>[ 0.522384] kmem_cache_destroy Acpi-Operand: Slab cache still has objects
>[ 0.524597] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26
>[ 0.526795] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006
>[ 0.529668] Call Trace:
>[ 0.530811] ? dump_stack+0x5c/0x81
>[ 0.532240] ? kmem_cache_destroy+0x1aa/0x1c0
>[ 0.533905] ? acpi_os_delete_cache+0xa/0x10
>[ 0.535497] ? acpi_ut_delete_caches+0x3f/0x7b
>[ 0.537237] ? acpi_terminate+0xa/0x14
>[ 0.538701] ? acpi_init+0x2af/0x34f
>[ 0.540008] ? acpi_sleep_proc_init+0x27/0x27
>[ 0.541593] ? do_one_initcall+0x4e/0x1a0
>[ 0.543008] ? kernel_init_freeable+0x19e/0x21f
>[ 0.546202] ? rest_init+0x80/0x80
>[ 0.547513] ? kernel_init+0xa/0x100
>[ 0.548817] ? ret_from_fork+0x25/0x30
>[ 0.550587] vgaarb: loaded
>[ 0.551716] EDAC MC: Ver: 3.0.0
>[ 0.553744] PCI: Probing PCI hardware
>[ 0.555038] PCI host bridge to bus 0000:00
> ... Continue to boot and log is omitted ...
I analyzed this memory leak in detail and found acpi_ns_evaluate() function
only removes Info->return_object in AE_CTRL_RETURN_VALUE case. But, when errors
occur, the status value is not AE_CTRL_RETURN_VALUE, and Info->return_object is
also not null. Therefore, this causes acpi operand memory leak.
This cache leak causes a security threat because an old kernel (<= 4.9) shows
memory locations of kernel functions in stack dump. Some malicious users
could use this information to neutralize kernel ASLR.
I made a patch to fix ACPI operand cache leak.
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Moore [Wed, 14 Mar 2018 23:13:01 +0000 (16:13 -0700)]
ACPICA: Fix memory leak on unusual memory leak
[ Upstream commit
1c29c372b2d1d2415601041532745ce859f24126 ]
Fixes a single-object memory leak on a store-to-reference method
invocation. ACPICA BZ 1439.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Erik Schmauss [Wed, 14 Mar 2018 23:13:08 +0000 (16:13 -0700)]
ACPICA: Events: add a return on failure from acpi_hw_register_read
[ Upstream commit
b4c0de312613ca676db5bd7e696a44b56795612a ]
This ensures that acpi_ev_fixed_event_detect() does not use fixed_status
and and fixed_enable as uninitialized variables.
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Icenowy Zheng [Fri, 16 Mar 2018 14:02:12 +0000 (22:02 +0800)]
dt-bindings: add device tree binding for Allwinner H6 main CCU
[ Upstream commit
2e08e4d2ff488424919d69dd211ac860a019ac1d ]
The Allwinner H6 main CCU uses the internal oscillator of the SoC, which
is different with old SoCs' main CCU.
Add device tree binding for the Allwinner H6 main CCU.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Wed, 14 Mar 2018 19:56:37 +0000 (20:56 +0100)]
remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'
[ Upstream commit
de6f83f85be94e0b7d0d324c29ccc9d78a6bb4e7 ]
If 'of_device_get_match_data()' fails, we must undo the previous
'rproc_alloc()' call.
Fixes:
a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coly Li [Mon, 19 Mar 2018 00:36:15 +0000 (17:36 -0700)]
bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
[ Upstream commit
fadd94e05c02afec7b70b0b14915624f1782f578 ]
In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()",
cached_dev_get() is called when creating dc->writeback_thread, and
cached_dev_put() is called when exiting dc->writeback_thread. This
modification works well unless people detach the bcache device manually by
'echo 1 > /sys/block/bcache<N>/bcache/detach'
Because this sysfs interface only calls bch_cached_dev_detach() which wakes
up dc->writeback_thread but does not stop it. The reason is, before patch
"bcache: fix cached_dev->count usage for bch_cache_set_error()", inside
bch_writeback_thread(), if cache is not dirty after writeback,
cached_dev_put() will be called here. And in cached_dev_make_request() when
a new write request makes cache from clean to dirty, cached_dev_get() will
be called there. Since we don't operate dc->count in these locations,
refcount d->count cannot be dropped after cache becomes clean, and
cached_dev_detach_finish() won't be called to detach bcache device.
This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is
set inside bch_writeback_thread(). If this bit is set and cache is clean
(no existing writeback_keys), break the while-loop, call cached_dev_put()
and quit the writeback thread.
Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the
writeback thread should continue to perform writeback, this is the original
design of manually detach.
It is safe to do the following check without locking, let me explain why,
+ if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+ (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {
If the kenrel thread does not sleep and continue to run due to conditions
are not updated in time on the running CPU core, it just consumes more CPU
cycles and has no hurt. This should-sleep-but-run is safe here. We just
focus on the should-run-but-sleep condition, which means the writeback
thread goes to sleep in mistake while it should continue to run.
1, First of all, no matter the writeback thread is hung or not,
kthread_stop() from cached_dev_detach_finish() will wake up it and
terminate by making kthread_should_stop() return true. And in normal
run time, bit on index BCACHE_DEV_DETACHING is always cleared, the
condition
!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)
is always true and can be ignored as constant value.
2, If one of the following conditions is true, the writeback thread should
go to sleep,
"!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)"
each of them independently controls the writeback thread should sleep or
not, let's analyse them one by one.
2.1 condition "!atomic_read(&dc->has_dirty)"
If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will
call bch_writeback_queue() immediately or call bch_writeback_add() which
indirectly calls bch_writeback_queue() too. In bch_writeback_queue(),
wake_up_process(dc->writeback_thread) is called. It sets writeback
thread's task state to TASK_RUNNING and following an implicit memory
barrier, then tries to wake up the writeback thread.
In writeback thread, its task state is set to TASK_INTERRUPTIBLE before
doing the condition check. If other CPU core sets the TASK_RUNNING state
after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread
will be scheduled to run very soon because its state is not
TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before
writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier
of wake_up_process() will make sure modification of dc->has_dirty on
other CPU core is updated and observed on the CPU core of writeback
thread. Therefore the condition check will correctly be false, and
continue writeback code without sleeping.
2.2 condition "!dc->writeback_running)"
dc->writeback_running can be changed via sysfs file, every time it is
modified, a following bch_writeback_queue() is alwasy called. So the
change is always observed on the CPU core of writeback thread. If
dc->writeback_running is changed from 0 to 1 on other CPU core, this
condition check will observe the modification and allow writeback
thread to continue to run without sleeping.
Now we can see, even without a locking protection, multiple conditions
check is safe here, no deadlock or process hang up will happen.
I compose a separte patch because that patch "bcache: fix cached_dev->count
usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes
Reinecke. Also this fix is not trivial and good for a separate patch.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Huijun Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Schmitz [Fri, 2 Mar 2018 23:04:13 +0000 (12:04 +1300)]
zorro: Set up z->dev.dma_mask for the DMA API
[ Upstream commit
55496d3fe2acd1a365c43cbd613a20ecd4d74395 ]
The generic DMA API uses dev->dma_mask to check the DMA addressable
memory bitmask, and warns if no mask is set or even allocated.
Set z->dev.dma_coherent_mask on Zorro bus scan, and make z->dev.dma_mask
to point to z->dev.dma_coherent_mask so device drivers that need DMA have
everything set up to avoid warnings from dma_alloc_coherent(). Drivers can
still use dma_set_mask_and_coherent() to explicitly set their DMA bit mask.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
[geert: Handle Zorro II with 24-bit address space]
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Honggang Li [Fri, 16 Mar 2018 02:37:13 +0000 (10:37 +0800)]
IB/mlx5: Set the default active rate and width to QDR and 4X
[ Upstream commit
7672ed33c4c15dbe9d56880683baaba4227cf940 ]
Before commit
f1b65df5a232 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set the default active_width
and active_speed to IB_WIDTH_4X and IB_SPEED_QDR.
When the RoCE port is down, the RoCE port does not negotiate the active
width with the remote side, causing the active width to be zero. When
running userspace ibstat to view the port status, ibstat will panic as it
reads an invalid width from sys file.
This patch restores the original behavior.
Fixes:
f1b65df5a232 ("IB/mlx5: Add support for active_width and active_speed in RoCE").
Signed-off-by: Honggang Li <honli@redhat.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunyu Hu [Mon, 5 Mar 2018 05:40:38 +0000 (13:40 +0800)]
cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path
[ Upstream commit
55b55abc17f238c61921360e61dde90dd9a326d1 ]
Kmemleak reported the below leak. When cppc_cpufreq_init went into
failure path, the cpu mask is not freed. After fix, this report is
gone. And to avaoid potential NULL pointer reference, check the cpu
value first.
unreferenced object 0xffff800fd5ea4880 (size 128):
comm "swapper/0", pid 1, jiffies
4294939510 (age 668.680s)
hex dump (first 32 bytes):
00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 .... ...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffff0000082c4ae4>] __kmalloc_node+0x278/0x634
[<
ffff0000088f4a74>] alloc_cpumask_var_node+0x28/0x60
[<
ffff0000088f4af0>] zalloc_cpumask_var+0x14/0x1c
[<
ffff000008d20254>] cppc_cpufreq_init+0xd0/0x19c
[<
ffff000008083828>] do_one_initcall+0xec/0x15c
[<
ffff000008cd1018>] kernel_init_freeable+0x1f4/0x2a4
[<
ffff0000089099b0>] kernel_init+0x18/0x10c
[<
ffff000008084d50>] ret_from_fork+0x10/0x18
[<
ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yong Wu [Sun, 18 Mar 2018 01:52:54 +0000 (09:52 +0800)]
iommu/mediatek: Fix protect memory setting
[ Upstream commit
70ca608b2ec6dafa6bb1c2b0691852fc78f8f717 ]
In MediaTek's IOMMU design, When a iommu translation fault occurs
(HW can NOT translate the destination address to a valid physical
address), the IOMMU HW output the dirty data into a special memory
to avoid corrupting the main memory, this is called "protect memory".
the register(0x114) for protect memory is a little different between
mt8173 and mt2712.
In the mt8173, bit[30:6] in the register represents [31:7] of the
physical address. In the 4GB mode, the register bit[31] should be 1.
While in the mt2712, the bits don't shift. bit[31:7] in the register
represents [31:7] in the physical address, and bit[1:0] in the
register represents bit[33:32] of the physical address if it has.
Fixes:
e6dec9230862 ("iommu/mediatek: Add mt2712 IOMMU support")
Reported-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Hellstrom [Thu, 22 Mar 2018 09:35:18 +0000 (10:35 +0100)]
drm/vmwgfx: Unpin the screen object backup buffer when not used
[ Upstream commit
20fb5a635a0c8478ac98f15cfafc2ea83df29565 ]
We were relying on the pinned screen object backup buffer to be destroyed
when not used. But if we hold a copy of the atomic state, like when
hibernating, the backup buffer might not be destroyed since it's
refcounted by the atomic state. This causes us to hibernate with a
buffer pinned in VRAM.
Fix this by only having the buffer pinned when it is actually used by a
screen object.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Sandeen [Thu, 22 Mar 2018 15:59:00 +0000 (11:59 -0400)]
ext4: don't complain about incorrect features when probing
[ Upstream commit
0d9366d67bcf066b028e57d09c9a86ce879bcc28 ]
If mount is auto-probing for filesystem type, it will try various
filesystems in order, with the MS_SILENT flag set. We get
that flag as the silent arg to ext4_fill_super.
If we're probing (silent==1) then don't complain about feature
incompatibilities that are found if it looks like it's actually
a different valid extN type - failed probes should be silent
in this case.
If the on-disk features are unknown even to ext4, then complain.
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Tested-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Puschmann [Fri, 23 Mar 2018 09:22:15 +0000 (10:22 +0100)]
arm: dts: socfpga: fix GIC PPI warning
[ Upstream commit
6d97d5aba08b26108f95dc9fb7bbe4d9436c769c ]
Fixes the warning "GIC: PPI13 is secure or misconfigured" by
changing the interrupt type from level_low to edge_raising
Signed-off-by: Philipp Puschmann <pp@emlix.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jay Vosburgh [Thu, 22 Mar 2018 14:42:41 +0000 (14:42 +0000)]
virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
[ Upstream commit
bda7fab54828bbef2164bb23c0f6b1a7d05cc718 ]
The operstate update logic will leave an interface in the
default UNKNOWN operstate if the interface carrier state never changes
from the default carrier up state set at creation. This includes the
case of an explicit call to netif_carrier_on, as the carrier on to on
transition has no effect on operstate.
This affects virtio-net for the case that the virtio peer does
not support VIRTIO_NET_F_STATUS (the feature that provides carrier state
updates). Without this feature, the virtio specification states that
"the link should be assumed active," so, logically, the operstate should
be UP instead of UNKNOWN. This has impact on user space applications
that use the operstate to make availability decisions for the interface.
Resolve this by changing the virtio probe logic slightly to call
netif_carrier_off for both the "with" and "without" VIRTIO_NET_F_STATUS
cases, and then the existing call to netif_carrier_on for the "without"
case will cause an operstate transition.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Milton Miller [Thu, 15 Mar 2018 16:02:06 +0000 (11:02 -0500)]
watchdog: aspeed: Allow configuring for alternate boot
[ Upstream commit
6ffa3402211acc30e47e691e14d62f3fd065a54e ]
Allow the device tree to specify a watchdog to fallover to
the alternate boot source.
The aspeeed watchdog can set a latch directing flash chip select 0 to
chip select 1, allowing boot from an alternate media if the watchdog
is not reset in time. On the ast2400 bank 1 also goes to flash bank 1,
while on the ast2500 the chip selects are swapped.
Also clear the secondary boot bit during the machine restart operation.
Otherwise, the system will switch to the alternate boot after every
reboot, which is not desired.
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Vorel [Fri, 23 Mar 2018 13:41:08 +0000 (14:41 +0100)]
ima: Fallback to the builtin hash algorithm
[ Upstream commit
ab60368ab6a452466885ef4edf0cefd089465132 ]
IMA requires having it's hash algorithm be compiled-in due to it's
early use. The default IMA algorithm is protected by Kconfig to be
compiled-in.
The ima_hash kernel parameter allows to choose the hash algorithm. When
the specified algorithm is not available or available as a module, IMA
initialization fails, which leads to a kernel panic (mknodat syscall calls
ima_post_path_mknod()). Therefore as fallback we force IMA to use
the default builtin Kconfig hash algorithm.
Fixed crash:
$ grep CONFIG_CRYPTO_MD4 .config
CONFIG_CRYPTO_MD4=m
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=
74ae8202-9ca7-4e39-813b-
22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4
...
[ 1.545190] ima: Can not allocate md4 (reason: -2)
...
[ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2.611903] IP: ima_match_policy+0x23/0x390
[ 2.612967] PGD 0 P4D 0
[ 2.613080] Oops: 0000 [#1] SMP
[ 2.613080] Modules linked in: autofs4
[ 2.613080] Supported: Yes
[ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1
[ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
[ 2.613080] task:
ffff88003e2d0040 task.stack:
ffffc90000190000
[ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390
[ 2.613080] RSP: 0018:
ffffc90000193e88 EFLAGS:
00010296
[ 2.613080] RAX:
0000000000000000 RBX:
000000000000000c RCX:
0000000000000004
[ 2.613080] RDX:
0000000000000010 RSI:
0000000000000001 RDI:
ffff880037071728
[ 2.613080] RBP:
0000000000008000 R08:
0000000000000000 R09:
0000000000000000
[ 2.613080] R10:
0000000000000008 R11:
61c8864680b583eb R12:
00005580ff10086f
[ 2.613080] R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000008000
[ 2.613080] FS:
00007f5c1da08940(0000) GS:
ffff88003fc00000(0000) knlGS:
0000000000000000
[ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2.613080] CR2:
0000000000000000 CR3:
0000000037002000 CR4:
00000000003406f0
[ 2.613080] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 2.613080] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 2.613080] Call Trace:
[ 2.613080] ? shmem_mknod+0xbf/0xd0
[ 2.613080] ima_post_path_mknod+0x1c/0x40
[ 2.613080] SyS_mknod+0x210/0x220
[ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5
[ 2.613080] RIP: 0033:0x7f5c1bfde570
[ 2.613080] RSP: 002b:
00007ffde1c90dc8 EFLAGS:
00000246 ORIG_RAX:
0000000000000085
[ 2.613080] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f5c1bfde570
[ 2.613080] RDX:
0000000000000000 RSI:
0000000000008000 RDI:
00005580ff10086f
[ 2.613080] RBP:
00007ffde1c91040 R08:
00005580ff10086f R09:
0000000000000000
[ 2.613080] R10:
0000000000104000 R11:
0000000000000246 R12:
00005580ffb99660
[ 2.613080] R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000002
[ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20
[ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP:
ffffc90000193e88
[ 2.613080] CR2:
0000000000000000
[ 2.613080] ---[ end trace
9a9f0a8a73079f6a ]---
[ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 2.673052]
[ 2.675337] Kernel Offset: disabled
[ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiandi An [Wed, 7 Mar 2018 05:26:26 +0000 (23:26 -0600)]
ima: Fix Kconfig to select TPM 2.0 CRB interface
[ Upstream commit
fac37c628fd5d68fd7298d9b57ae8601ee1b4723 ]
TPM_CRB driver provides TPM CRB 2.0 support. If it is built as a
module, the TPM chip is registered after IMA init. tpm_pcr_read() in
IMA fails and displays the following message even though eventually
there is a TPM chip on the system.
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
Fix IMA Kconfig to select TPM_CRB so TPM_CRB driver is built in the kernel
and initializes before IMA.
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arjun Vynipadath [Fri, 23 Mar 2018 09:55:10 +0000 (15:25 +0530)]
cxgb4: Setup FW queues before registering netdev
[ Upstream commit
843bd7db79c861b49e2912d723625f5fa8e94502 ]
When NetworkManager is enabled, there are chances that interface up
is called even before probe completes. This means we have not yet
allocated the FW sge queues, hence rest of ingress queue allocation
wont be proper. Fix this by calling setup_fw_sge_queues() before
register_netdev().
Fixes:
0fbc81b3ad51 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's')
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Gottschall [Sat, 3 Mar 2018 04:10:44 +0000 (05:10 +0100)]
ath9k: fix crash in spectral scan
[ Upstream commit
221b6ec69ed9c56b6cd9a124a387a9472f14284e ]
Fixes crash seen on arm smp systems (gateworks ventana imx6):
Unable to handle kernel NULL pointer dereference at virtual address
00000014
pgd =
80004000
[
00000014] *pgd=
00000000
Internal error: Oops - BUG: 17 [#1] PREEMPT SMP ARM
Modules linked in: ip6table_filter nf_conntrack_ipv6 ip6_tables nf_log_ipv6 nf_defrag_ipv6 shortcut_fe ipcomp6 xfrm_ipcomp xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_ro xfrm6_mode_beet ip6_tunnel tunnel6 mip6 ah6 esp6 xfrm_algo sit ip_tunnel tunnel4 ipv6 ath10k_pci ath10k_core ath9k ath mac80211 cfg80211 compat ath_pci ath_hal(P) caamalg authencesn authenc caamrng caamhash caam_jr caam cdc_ncm usbnet usbcore sky2 imx2_wdt
CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: P 4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task:
bf064980 task.stack:
bf07c000
PC is at relay_buf_full+0xc/0x30
LR is at _674+0x740/0xf10 [ath9k]
pc : [<
8018bce0>] lr : [<
7f1aa604>] psr:
80000013
sp :
bf07dbf0 ip :
bf07dc00 fp :
bf07dbfc
r10:
0000003f r9 :
bf130e00 r8 :
809044b0
r7 :
00000000 r6 :
be67a9f0 r5 :
00000000 r4 :
809043e4
r3 :
c0864c24 r2 :
00000000 r1 :
00000004 r0 :
00000000
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control:
10c5387d Table:
4e6a004a DAC:
00000055
Process ksoftirqd/0 (pid: 3, stack limit = 0xbf07c210)
Stack: (0xbf07dbf0 to 0xbf07e000)
dbe0:
bf07dd04 bf07dc00 7f1aa604 8018bce0
dc00:
00004014 be59e010 bf07dc34 bf07dc18 7f1a7084 7f19c07c be59c010 be6470a0
dc20:
0000096c be648954 bf07dc6c bf07dc38 7f1c286c bf07dd90 bf07dc5c bf07dc48
dc40:
8029ea4c 0000003c 00000001 be59c010 00000094 00000000 00000000 00000000
dc60:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dc80:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dca0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dcc0:
00000000 00000000 00000000 00000000 00000000 00000000 8010ef24 00000030
dce0:
be94f5e8 be6485a0 bddf0200 be59c010 be6465a0 be6415a0 bf07ddf4 bf07dd08
dd00:
7f1cf800 7f1aa55c 1fc38c4c 00000000 bf07dd58 cccccccd 66666667 be640bc0
dd20:
bf07dd54 be6415a0 1fc38c4c 00000000 00000000 be59c038 be67a9c0 be59e010
dd40:
be67a9f0 be647170 8090c904 be59c010 00000000 00000001 1fc38e84 00000000
dd60:
be640bc0 bddf0200 00000200 00000010 0000003f 00000002 20000013 be59c010
dd80:
8092d940 bf7ca2c0 bf07ddb4 bf07dd98 1fc38c4c 2602003f 0100ff1b 80ff1b00
dda0:
00808080 00000000 00000000 80808080 80808080 80808080 80808080 00008080
ddc0:
00000000 00000000 7f1b62b8 00000002 be6470ec be6470f0 00000000 bf07de98
dde0:
8092d940 be6415a0 bf07de94 bf07ddf8 7f1d1ed8 7f1cf1fc 00000000 00000000
de00:
bf7cc4c0 00000400 be6470f0 bf07de18 8015165c be59c010 8090453c 8090453c
de20:
bf07dec4 be6465a0 8014f614 80148884 0000619a 00000001 bf07c000 00000100
de40:
bf07de78 00000001 7f327850 00000002 afb50401 bf064980 bf07de9c bf07de68
de60:
bf064a00 803cc668 bf064a00 be6470b4 be6470b8 80844180 00000000 bf07de98
de80:
8092d940 bf07c000 bf07dec4 bf07de98 80124d18 7f1d1c44 80124c94 00000000
dea0:
00000006 80902098 80902080 40000006 00000100 bf07c000 bf07df24 bf07dec8
dec0:
8012501c 80124ca0 bf7cc4c0 bf064980 be95e1c0 04208040 80902d00 000061c7
dee0:
0000000a 80600b54 8092d940 808441f8 80902080 bf07dec8 bf03b200 bf07c000
df00:
bf03b200 8090fe54 00000000 00000000 00000000 00000000 bf07df34 bf07df28
df20:
80125148 80124f28 bf07df5c bf07df38 8013deb4 8012511c 00000000 bf03b240
df40:
bf03b200 8013dc90 00000000 00000000 bf07dfac bf07df60 8013ad40 8013dc9c
df60:
70448040 00000001 00000000 bf03b200 00000000 00030003 bf07df78 bf07df78
df80:
00000000 00000000 bf07df88 bf07df88 bf03b240 8013ac48 00000000 00000000
dfa0:
00000000 bf07dfb0 80107760 8013ac54 00000000 00000000 00000000 00000000
dfc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0:
00000000 00000000 00000000 00000000 00000013 00000000 8c120004 1190ad04
Backtrace:
[<
8018bcd4>] (relay_buf_full) from [<
7f1aa604>] (_674+0x740/0xf10 [ath9k])
[<
7f1aa550>] (_674 [ath9k]) from [<
7f1cf800>] (_582+0x14b4/0x3708 [ath9k])
r10:
be6415a0 r9:
be6465a0 r8:
be59c010 r7:
bddf0200 r6:
be6485a0 r5:
be94f5e8
r4:
00000030
[<
7f1cf1f0>] (_582 [ath9k]) from [<
7f1d1ed8>] (_735+0x2a0/0xec4 [ath9k])
r10:
be6415a0 r9:
8092d940 r8:
bf07de98 r7:
00000000 r6:
be6470f0 r5:
be6470ec
r4:
00000002
[<
7f1d1c38>] (_735 [ath9k]) from [<
80124d18>] (tasklet_action+0x84/0xf8)
r10:
bf07c000 r9:
8092d940 r8:
bf07de98 r7:
00000000 r6:
80844180 r5:
be6470b8
r4:
be6470b4
[<
80124c94>] (tasklet_action) from [<
8012501c>] (__do_softirq+0x100/0x1f4)
r10:
bf07c000 r9:
00000100 r8:
40000006 r7:
80902080 r6:
80902098 r5:
00000006
r4:
00000000 r3:
80124c94
[<
80124f1c>] (__do_softirq) from [<
80125148>] (run_ksoftirqd+0x38/0x4c)
r10:
00000000 r9:
00000000 r8:
00000000 r7:
00000000 r6:
8090fe54 r5:
bf03b200
r4:
bf07c000
[<
80125110>] (run_ksoftirqd) from [<
8013deb4>] (smpboot_thread_fn+0x224/0x260)
[<
8013dc90>] (smpboot_thread_fn) from [<
8013ad40>] (kthread+0xf8/0x100)
r9:
00000000 r8:
00000000 r7:
8013dc90 r6:
bf03b200 r5:
bf03b240 r4:
00000000
[<
8013ac48>] (kthread) from [<
80107760>] (ret_from_fork+0x14/0x34)
r7:
00000000 r6:
00000000 r5:
8013ac48 r4:
bf03b240
Code:
e89da800 e1a0c00d e92dd800 e24cb004 (
e5901014)
---[ end trace
dddf11ac9111b272 ]---
Kernel panic - not syncing: Fatal exception in interrupt
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: P D 4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<
8010a708>] (dump_backtrace) from [<
8010a99c>] (show_stack+0x18/0x1c)
r7:
bf093f58 r6:
20000193 r5:
809168e8 r4:
00000000
[<
8010a984>] (show_stack) from [<
802a09c4>] (dump_stack+0x94/0xa8)
[<
802a0930>] (dump_stack) from [<
8010d184>] (handle_IPI+0xe8/0x180)
r7:
bf093f58 r6:
00000000 r5:
00000001 r4:
808478c4
[<
8010d09c>] (handle_IPI) from [<
801013e8>] (gic_handle_irq+0x78/0x7c)
r7:
f4000100 r6:
bf093f58 r5:
f400010c r4:
8090467c
[<
80101370>] (gic_handle_irq) from [<
8010b378>] (__irq_svc+0x58/0x8c)
Exception stack(0xbf093f58 to 0xbf093fa0)
3f40:
bf7d62a0 00000000
3f60:
0010a5f4 80113460 bf092000 809043e4 00000002 80904434 bf092008 412fc09a
3f80:
00000000 bf093fb4 bf093fb8 bf093fa8 8010804c 80108050 60000013 ffffffff
r9:
bf092000 r8:
bf092008 r7:
bf093f8c r6:
ffffffff r5:
60000013 r4:
80108050
[<
80108014>] (arch_cpu_idle) from [<
80553c2c>] (default_idle_call+0x30/0x34)
[<
80553bfc>] (default_idle_call) from [<
80158394>] (cpu_startup_entry+0xc4/0xfc)
[<
801582d0>] (cpu_startup_entry) from [<
8010ce40>] (secondary_start_kernel+0x168/0x174)
r7:
8092d2f8 r4:
80913568
[<
8010ccd8>] (secondary_start_kernel) from [<
10101488>] (0x10101488)
r5:
00000055 r4:
4f07806a
Rebooting in 10 seconds..
Reboot failed -- System halted
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jarosław Janik [Sun, 11 Mar 2018 18:51:56 +0000 (19:51 +0100)]
nvme-pci: disable APST for Samsung NVMe SSD 960 EVO + ASUS PRIME Z370-A
[ Upstream commit
467c77d4cbefaaf65e2f44fe102d543a52fcae5b ]
Yet another "incompatible" Samsung NVMe SSD 960 EVO and Asus motherboard
combination. 960 EVO device disappears from PCIe bus within few minutes
after boot-up when APST is in use and never gets back. Forcing
NVME_QUIRK_NO_APST is the only way to make this drive work with this
particular motherboard. NVME_QUIRK_NO_DEEPEST_PS doesn't work, upgrading
motherboard's BIOS didn't help either.
Since this is a desktop motherboard, the only drawback of not using APST
is increased device temperature.
Signed-off-by: Jarosław Janik <jaroslaw.janik@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Karthikeyan Periyasamy [Mon, 12 Mar 2018 11:39:40 +0000 (17:09 +0530)]
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
[ Upstream commit
8b2d93dd22615cb7f3046a5a2083a6f8bb8052ed ]
When attempt to run worker (ath10k_sta_rc_update_wk) after the station object
(ieee80211_sta) delete will trigger the kernel panic.
This problem arise in AP + Mesh configuration, Where the current node AP VAP
and neighbor node mesh VAP MAC address are same. When the current mesh node
try to establish the mesh link with neighbor node, driver peer creation for
the neighbor mesh node fails due to duplication MAC address. Already the AP
VAP created with same MAC address.
It is caused by the following scenario steps.
Steps:
1. In above condition, ath10k driver sta_state callback (ath10k_sta_state)
fails to do the state change for a station from IEEE80211_STA_NOTEXIST
to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is
called from ieee80211_add_station() to handle the new station
(neighbor mesh node) request from the wpa_supplicant.
2. Concurrently ath10k receive the sta_rc_update callback notification from
the mesh_neighbour_update() to handle the beacon frames of the above
neighbor mesh node. since its atomic callback, ath10k driver queue the
work (ath10k_sta_rc_update_wk) to handle rc update.
3. Due to driver sta_state callback fails (step 1), mac80211 free the station
object.
4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access
the station object which is already deleted. so it will trigger kernel
panic.
Added the peer exist check in sta_rc_update callback before queue the work.
Kernel Panic log:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
c0204000
[
00000000] *pgd=
00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1
task:
dcef0000 ti:
d72b6000 task.ti:
d72b6000
PC is at pwq_activate_delayed_work+0x10/0x40
LR is at pwq_activate_delayed_work+0xc/0x40
pc : [<
c023f988>] lr : [<
c023f984>] psr:
40000193
sp :
d72b7f18 ip :
0000007a fp :
d72b6000
r10:
00000000 r9 :
dd404414 r8 :
d8c31998
r7 :
d72b6038 r6 :
00000004 r5 :
d4907ec8 r4 :
dcee1300
r3 :
ffffffe0 r2 :
00000000 r1 :
00000001 r0 :
00000000
Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
10c5787d Table:
595bc06a DAC:
00000015
...
Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238)
Stack: (0xd72b7f18 to 0xd72b8000)
7f00:
00000001 dcee1300
7f20:
00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089
7f40:
00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000
7f60:
00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000
7f80:
d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340
7fa0:
c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000
7fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fe0:
00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<
c023f988>] (pwq_activate_delayed_work) from [<
c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4)
[<
c02410dc>] (pwq_dec_nr_in_flight) from [<
c0242790>] (worker_thread+0x228/0x360)
[<
c0242790>] (worker_thread) from [<
c02474dc>] (kthread+0xd8/0xec)
[<
c02474dc>] (kthread) from [<
c0208d20>] (ret_from_fork+0x14/0x34)
Code:
e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs
Rebooting in 3 seconds..
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Fri, 23 Mar 2018 21:36:46 +0000 (00:36 +0300)]
watchdog: davinci_wdt: fix error handling in davinci_wdt_probe()
[ Upstream commit
d66e53649c18377edc08d48901e658e4fd491d46 ]
clk_disable_unprepare() was added to one error path,
but there is another one. The patch makes sure clk is
disabled at the both of them.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Tue, 2 Jan 2018 14:49:56 +0000 (16:49 +0200)]
net/mlx5: Protect from command bit overflow
[ Upstream commit
957f6ba8adc7be401a74ccff427e4cfd88d3bfcb ]
The system with CONFIG_UBSAN enabled on produces the following error
during driver initialization. The reason to it that max_reg_cmds can be
larger enough to cause to "1 << max_reg_cmds" overflow the unsigned long.
================================================================================
UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1805:42
signed integer overflow:
-
2147483648 - 1 cannot be represented in type 'int'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00032-g06cda2358d9b-dirty #724
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xe9/0x18f
? dma_virt_alloc+0x81/0x81
ubsan_epilogue+0xe/0x4e
handle_overflow+0x187/0x20c
mlx5_cmd_init+0x73a/0x12b0
mlx5_load_one+0x1c3d/0x1d30
init_one+0xd02/0xf10
pci_device_probe+0x26c/0x3b0
driver_probe_device+0x622/0xb40
__driver_attach+0x175/0x1b0
bus_for_each_dev+0xef/0x190
bus_add_driver+0x2db/0x490
driver_register+0x16b/0x1e0
__pci_register_driver+0x177/0x1b0
init+0x6d/0x92
do_one_initcall+0x15b/0x270
kernel_init_freeable+0x2d8/0x3d0
kernel_init+0x14/0x190
ret_from_fork+0x24/0x30
================================================================================
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman [Fri, 23 Mar 2018 09:44:27 +0000 (20:44 +1100)]
selftests: Print the test we're running to /dev/kmsg
[ Upstream commit
88893cf787d3062c631cc20b875068eb11756e03 ]
Some tests cause the kernel to print things to the kernel log
buffer (ie. printk), in particular oops and warnings etc. However when
running all the tests in succession it's not always obvious which
test(s) caused the kernel to print something.
We can narrow it down by printing which test directory we're running
in to /dev/kmsg, if it's writable.
Example output:
[ 170.149149] kselftest: Running tests in powerpc
[ 305.300132] kworker/dying (71) used greatest stack depth: 7776 bytes
left
[ 808.915456] kselftest: Running tests in pstore
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Asseg [Mon, 12 Mar 2018 18:57:06 +0000 (19:57 +0100)]
tools/thermal: tmon: fix for segfault
[ Upstream commit
6c59f64b7ecf2bccbe73931d7d573d66ed13b537 ]
Fixes a segfault occurring when e.g. <TAB> is pressed multiple times in the
ncurses tmon application. The segfault is caused by incrementing
cur_thermal_record in the main function without checking if it's value reached
NR_THERMAL_RECORD immediately. Since the boundary check only occurred in
update_thermal_data a race condition existed, which lead to an attempted read
beyond the last element of the trec array.
The fix was implemented by moving the cur_thermal_record incrementation to the
update_thermal_data function using a temporary variable on which the boundary
condition is checked before updating cur_thread_record, so that the variable is
never incremented beyond the trec array's boundary.
It seems the segfault does not occur on every machine: On a HP EliteBook G4 the
segfault happens, while it does not happen on a Thinkpad T540p.
Signed-off-by: Frank Asseg <frank.asseg@objecthunter.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amitkumar Karwar [Tue, 20 Mar 2018 13:40:41 +0000 (19:10 +0530)]
rsi: fix kernel panic observed on 64bit machine
[ Upstream commit
864db4d5085349fcfa1f260b5bcd2adde3d7f2ed ]
Following kernel panic is observed on 64bit machine while loading
the driver. It is fixed if we pass dynamically allocated memory to
SDIO for DMA.
BUG: unable to handle kernel paging request at
ffffeb04000172e0
IP: sg_miter_stop+0x56/0x70
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth
ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle
drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3
CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ #27
Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS
A19 06/13/2013
RIP: 0010:sg_miter_stop+0x56/0x70
RSP: 0018:
ffff88007d003e78 EFLAGS:
00010002
RAX:
0000000000000003 RBX:
0000000000000004 RCX:
0000000000000000
RDX:
ffffeb04000172c0 RSI:
ffff88002f58002c RDI:
ffff88007d003e80
RBP:
0000000000000004 R08:
ffff88007d003e80 R09:
0000000000000008
R10:
0000000000000003 R11:
0000000000000001 R12:
0000000000000004
R13:
ffff88002f580028 R14:
0000000000000000 R15:
0000000000000004
FS:
00007f35c29db700(0000) GS:
ffff88007d000000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffeb04000172e0 CR3:
000000007038e000 CR4:
00000000000406f0
Call Trace:
<IRQ>
sg_copy_buffer+0xc6/0xf0
sdhci_tasklet_finish+0x170/0x260 [sdhci]
tasklet_action+0xf4/0x100
__do_softirq+0xef/0x26e
irq_exit+0xbe/0xd0
do_IRQ+0x4a/0xc0
common_interrupt+0xa2/0xa2
</IRQ>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman [Wed, 21 Mar 2018 11:40:24 +0000 (17:10 +0530)]
powerpc/perf: Fix kernel address leak via sampling registers
[ Upstream commit
e1ebd0e5b9d0a10ba65e63a3514b6da8c6a5a819 ]
Current code in power_pmu_disable() does not clear the sampling
registers like Sampling Instruction Address Register (SIAR) and
Sampling Data Address Register (SDAR) after disabling the PMU. Since
these are userspace readable and could contain kernel addresses, add
code to explicitly clear the content of these registers.
Also add a "context synchronizing instruction" to enforce no further
updates to these registers as suggested by Power ISA v3.0B. From
section 9.4, on page 1108:
"If an mtspr instruction is executed that changes the value of a
Performance Monitor register other than SIAR, SDAR, and SIER, the
change is not guaranteed to have taken effect until after a
subsequent context synchronizing instruction has been executed (see
Chapter 11. "Synchronization Requirements for Context Alterations"
on page 1133)."
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Massage change log and add ISA reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madhavan Srinivasan [Wed, 21 Mar 2018 11:40:25 +0000 (17:10 +0530)]
powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer
[ Upstream commit
bb19af816025d495376bd76bf6fbcf4244f9a06d ]
The current Branch History Rolling Buffer (BHRB) code does not check
for any privilege levels before updating the data from BHRB. This
could leak kernel addresses to userspace even when profiling only with
userspace privileges. Add proper checks to prevent it.
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Tue, 27 Mar 2018 02:50:31 +0000 (19:50 -0700)]
hwmon: (nct6775) Fix writing pwmX_mode
[ Upstream commit
415eb2a1aaa4881cf85bd86c683356fdd8094a23 ]
pwmX_mode is defined in the ABI as 0=DC mode, 1=pwm mode. The chip
register bit is set to 1 for DC mode. This got mixed up, and writing
1 into pwmX_mode resulted in DC mode enabled. Fix it up by using
the ABI definition throughout the driver for consistency.
Fixes:
77eb5b3703d99 ("hwmon: (nct6775) Add support for pwm, pwm_mode, ... ")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Sun, 25 Mar 2018 12:04:22 +0000 (14:04 +0200)]
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
[ Upstream commit
b845f66f78bf42a4ce98e5cfe0e94fab41dd0742 ]
Carlo Pisani noticed that his C3600 workstation behaved unstable during heavy
I/O on the PCI bus with a VIA VT6421 IDE/SATA PCI card.
To avoid such instability, this patch switches the LBA PCI bus from Hard Fail
mode into Soft Fail mode. In this mode the bus will return -1UL for timed out
MMIO transactions, which is exactly how the x86 (and most other architectures)
PCI busses behave.
This patch is based on a proposal by Grant Grundler and Kyle McMartin 10
years ago:
https://www.spinics.net/lists/linux-parisc/msg01027.html
Cc: Carlo Pisani <carlojpisani@gmail.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Reviewed-by: Grant Grundler <grantgrundler@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luca Coelho [Mon, 18 Dec 2017 18:13:07 +0000 (20:13 +0200)]
iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txq
[ Upstream commit
9a233bb8025105db9a60b5d761005cc5a6c77f3d ]
Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue ==
IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF)
which is way too large for the u16 we used to store it in
hw_queue_to_mac820211. If this happens the following UBSAN warning
will be generated:
[ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5
[ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int'
Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and,
while at it, add a warning if the queue number is larger than
IEEE80211_MAX_QUEUES.
Fixes:
34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path")
Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Ungerer [Wed, 28 Mar 2018 07:12:18 +0000 (17:12 +1000)]
m68k: set dma and coherent masks for platform FEC ethernets
[ Upstream commit
f61e64310b75733d782e930d1fb404b84699eed6 ]
As of commit
205e1b7f51e4 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from
41833dd8:
41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
[<
40025534>] 0x40025534
[<
4004e514>] 0x4004e514
[<
400255de>] 0x400255de
[<
40159e20>] 0x40159e20
[<
40159e20>] 0x40159e20
It is not fatal, the driver and the system continue to function normally.
As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Thu, 1 Mar 2018 08:15:32 +0000 (10:15 +0200)]
intel_th: Use correct method of finding hub
[ Upstream commit
9ad577087165478c9d9be82b15ed9bf2db5835f5 ]
Since commit
8edc514b01e9 ("intel_th: Make SOURCE devices children of the
root device") the hub is not the parent of SOURCE devices any more, so the
new helper function should be used for that instead of always using the
parent. The intel_th_set_output() path, however, still uses the old
logic, leading to the hub driver structure being aliased with something
else, like struct pci_driver or struct acpi_driver, and an incorrect call
to an address inferred from that, potentially resulting in a crash.
Fixes:
8edc514b01e9 ("intel_th: Make SOURCE devices children of the root device")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Andrzej Siewior [Thu, 22 Mar 2018 15:22:33 +0000 (16:22 +0100)]
iommu/amd: Take into account that alloc_dev_data() may return NULL
[ Upstream commit
39ffe39545cd5cb5b8cee9f0469165cf24dc62c2 ]
find_dev_data() does not check whether the return value alloc_dev_data()
is NULL. This was okay once because the pointer was returned once as-is.
Since commit
df3f7a6e8e85 ("iommu/amd: Use is_attach_deferred
call-back") the pointer may be used within find_dev_data() so a NULL
check is required.
Cc: Baoquan He <bhe@redhat.com>
Fixes:
df3f7a6e8e85 ("iommu/amd: Use is_attach_deferred call-back")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anilkumar Kolli [Wed, 28 Mar 2018 09:19:40 +0000 (12:19 +0300)]
ath10k: advertize beacon_int_min_gcd
[ Upstream commit
8ebee73b574ad3dd1f14d461f65ceaffbd637650 ]
This patch fixes regression caused by
0c317a02ca98
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053
Fixes:
0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harry Morris [Wed, 28 Mar 2018 10:54:27 +0000 (11:54 +0100)]
ieee802154: ca8210: fix uninitialised data read
[ Upstream commit
86674a97f5055f4c7f406563408096e8cf9364ff ]
In ca8210_test_int_user_write() a user can request the transfer of a
frame with a length field (command.length) that is longer than the
actual buffer provided (len). In this scenario the driver will copy
the buffer contents into the uninitialised command[] buffer, then
transfer <data.length> bytes over the SPI even though only <len> bytes
had been populated, potentially leaking sensitive kernel memory.
Also the first 6 bytes of the command buffer must be initialised in case
a malformed, short packet is written and the uninitialised bytes are
read in ca8210_test_check_upstream.
Reported-by: Domen Puncer Kugler <domen.puncer@samsung.com>
Signed-off-by: Harry Morris <h.morris@cascoda.com>
Tested-by: Harry Morris <h.morris@cascoda.com>
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman [Fri, 30 Mar 2018 12:27:25 +0000 (23:27 +1100)]
powerpc/mpic: Check if cpu_possible() in mpic_physmask()
[ Upstream commit
0834d627fbea00c1444075eb3e448e1974da452d ]
In mpic_physmask() we loop over all CPUs up to 32, then get the hard
SMP processor id of that CPU.
Currently that's possibly walking off the end of the paca array, but
in a future patch we will change the paca array to be an array of
pointers, and in that case we will get a NULL for missing CPUs and
oops. eg:
Unable to handle kernel paging request for data at address 0x88888888888888b8
Faulting instruction address: 0xc00000000004e380
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP .mpic_set_affinity+0x60/0x1a0
LR .irq_do_set_affinity+0x48/0x100
Fix it by checking the CPU is possible, this also fixes the code if
there are gaps in the CPU numbering which probably never happens on
mpic systems but who knows.
Debugged-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lenny Szubowicz [Tue, 27 Mar 2018 13:56:40 +0000 (09:56 -0400)]
ACPI: acpi_pad: Fix memory leak in power saving threads
[ Upstream commit
8b29d29abc484d638213dd79a18a95ae7e5bb402 ]
Fix once per second (round_robin_time) memory leak of about 1 KB in
each acpi_pad kernel idling thread that is activated.
Found by testing with kmemleak.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Fri, 16 Mar 2018 20:17:28 +0000 (22:17 +0200)]
drivers: macintosh: rack-meter: really fix bogus memsets
[ Upstream commit
e283655b5abe26462d53d5196f186c5e8863af3b ]
We should zero an array using sizeof instead of number of elements.
Fixes the following compiler (GCC 7.3.0) warnings:
drivers/macintosh/rack-meter.c: In function 'rackmeter_do_pause':
drivers/macintosh/rack-meter.c:157:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
drivers/macintosh/rack-meter.c:158:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
Fixes:
4f7bef7a9f69 ("drivers: macintosh: rack-meter: fix bogus memsets")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 29 Mar 2018 09:01:53 +0000 (12:01 +0300)]
xen/acpi: off by one in read_acpi_id()
[ Upstream commit
c37a3c94775855567b90f91775b9691e10bd2806 ]
If acpi_id is == nr_acpi_bits, then we access one element beyond the end
of the acpi_psd[] array or we set one bit beyond the end of the bit map
when we do __set_bit(acpi_id, acpi_id_present);
Fixes:
59a568029181 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 30 Mar 2018 20:04:44 +0000 (21:04 +0100)]
rxrpc: Don't treat call aborts as conn aborts
[ Upstream commit
57b0c9d49b94bbeb53649b7fbd264603c1ebd585 ]
If a call-level abort is received for the previous call to complete on a
connection channel, then that abort is queued for the connection processor
to handle. Unfortunately, the connection processor then assumes without
checking that the abort is connection-level (ie. callNumber is 0) and
distributes it over all active calls on that connection, thereby
incorrectly aborting them.
Fix this by discarding aborts aimed at a completed call.
Further, discard all packets aimed at a call that's complete if there's
currently an active call on a channel, since the DATA packets associated
with the new call automatically terminate the old call.
Fixes:
18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 30 Mar 2018 20:04:43 +0000 (21:04 +0100)]
rxrpc: Fix Tx ring annotation after initial Tx failure
[ Upstream commit
03877bf6a30cca7d4bc3ffabd3c3e9464a7a1a19 ]
rxrpc calls have a ring of packets that are awaiting ACK or retransmission
and a parallel ring of annotations that tracks the state of those packets.
If the initial transmission of a packet on the underlying UDP socket fails
then the packet annotation is marked for resend - but the setting of this
mark accidentally erases the last-packet mark also stored in the same
annotation slot. If this happens, a call won't switch out of the Tx phase
when all the packets have been transmitted.
Fix this by retaining the last-packet mark and only altering the packet
state.
Fixes:
248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Tue, 19 Dec 2017 07:44:54 +0000 (15:44 +0800)]
btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled
[ Upstream commit
4d31778aa2fa342f5f92ca4025b293a1729161d1 ]
When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).
This can be triggered by fstests btrfs/152.
The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.
Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.
Reported-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Mahoney [Fri, 16 Mar 2018 18:36:27 +0000 (14:36 -0400)]
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
[ Upstream commit
8a5a916d9a35e13576d79cc16e24611821b13e34 ]
While running btrfs/011, I hit the following lockdep splat.
This is the important bit:
pcpu_alloc+0x1ac/0x5e0
__percpu_counter_init+0x4e/0xb0
btrfs_init_fs_root+0x99/0x1c0 [btrfs]
btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
resolve_indirect_refs+0x130/0x830 [btrfs]
find_parent_nodes+0x69e/0xff0 [btrfs]
btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
btrfs_find_all_roots+0x50/0x70 [btrfs]
btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
The percpu_counter_init call in btrfs_alloc_subvolume_writers
uses GFP_KERNEL, which we can't do during transaction commit.
This switches it to GFP_NOFS.
========================================================
WARNING: possible irq lock inversion dependency detected
4.12.14-kvmsmall #8 Tainted: G W
--------------------------------------------------------
kswapd0/50 just changed the state of lock:
(&delayed_node->mutex){+.+.-.}, at: [<
ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
but this lock took another, RECLAIM_FS-unsafe lock in the past:
(pcpu_alloc_mutex){+.+.+.}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pcpu_alloc_mutex);
local_irq_disable();
lock(&delayed_node->mutex);
lock(&found->groups_sem);
<Interrupt>
lock(&delayed_node->mutex);
*** DEADLOCK ***
2 locks held by kswapd0/50:
#0: (shrinker_rwsem){++++..}, at: [<
ffffffff811dc11f>] shrink_slab+0x7f/0x5b0
#1: (&type->s_umount_key#30){+++++.}, at: [<
ffffffff8126dec6>] trylock_super+0x16/0x50
the shortest dependencies between 2nd lock and 1st lock:
-> (pcpu_alloc_mutex){+.+.+.} ops: 4904 {
HARDIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
kmem_cache_init_late+0x42/0x75
start_kernel+0x343/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
SOFTIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
kmem_cache_init_late+0x42/0x75
start_kernel+0x343/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
RECLAIM_FS-ON-W at:
__kmalloc+0x47/0x310
pcpu_extend_area_map+0x2b/0xc0
pcpu_alloc+0x3ec/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
__kmem_cache_create+0x1bf/0x390
create_cache+0xba/0x1b0
kmem_cache_create+0x1f8/0x2b0
ksm_init+0x6f/0x19d
do_one_initcall+0x50/0x1b0
kernel_init_freeable+0x201/0x289
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
INITIAL USE at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
setup_cpu_cache+0x2f/0x1f0
__kmem_cache_create+0x1bf/0x390
create_boot_cache+0x8b/0xb1
kmem_cache_init+0xa1/0x19e
start_kernel+0x270/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
}
... key at: [<
ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0
... acquired at:
pcpu_alloc+0x1ac/0x5e0
__percpu_counter_init+0x4e/0xb0
btrfs_init_fs_root+0x99/0x1c0 [btrfs]
btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
resolve_indirect_refs+0x130/0x830 [btrfs]
find_parent_nodes+0x69e/0xff0 [btrfs]
btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
btrfs_find_all_roots+0x50/0x70 [btrfs]
btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
transaction_kthread+0x176/0x1b0 [btrfs]
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
-> (&fs_info->commit_root_sem){++++..} ops: 1566382 {
HARDIRQ-ON-W at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
HARDIRQ-ON-R at:
down_read+0x35/0x90
caching_thread+0x57/0x560 [btrfs]
normal_work_helper+0x1c0/0x5e0 [btrfs]
process_one_work+0x1e0/0x5c0
worker_thread+0x44/0x390
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
SOFTIRQ-ON-W at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-R at:
down_read+0x35/0x90
caching_thread+0x57/0x560 [btrfs]
normal_work_helper+0x1c0/0x5e0 [btrfs]
process_one_work+0x1e0/0x5c0
worker_thread+0x44/0x390
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
INITIAL USE at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<
ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs]
... acquired at:
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
btrfs_create_tree+0xbb/0x2a0 [btrfs]
btrfs_create_uuid_tree+0x37/0x140 [btrfs]
open_ctree+0x23c0/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> (&found->groups_sem){++++..} ops: 2134587 {
HARDIRQ-ON-W at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
HARDIRQ-ON-R at:
down_read+0x35/0x90
btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
open_ctree+0x207b/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-W at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-R at:
down_read+0x35/0x90
btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
open_ctree+0x207b/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
INITIAL USE at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<
ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs]
... acquired at:
find_free_extent+0xcb4/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
__btrfs_cow_block+0x110/0x5b0 [btrfs]
btrfs_cow_block+0xd7/0x290 [btrfs]
btrfs_search_slot+0x1f6/0x960 [btrfs]
btrfs_lookup_inode+0x2a/0x90 [btrfs]
__btrfs_update_delayed_inode+0x65/0x210 [btrfs]
btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs]
btrfs_evict_inode+0x3fe/0x6a0 [btrfs]
evict+0xc4/0x190
__dentry_kill+0xbf/0x170
dput+0x2ae/0x2f0
SyS_rename+0x2a6/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> (&delayed_node->mutex){+.+.-.} ops: 5580204 {
HARDIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
IN-RECLAIM_FS-W at:
__mutex_lock+0x4e/0x8c0
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
INITIAL USE at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<
ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs]
... acquired at:
__lock_acquire+0x264/0x11c0
lock_acquire+0xbd/0x1e0
__mutex_lock+0x4e/0x8c0
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
stack backtrace:
CPU: 1 PID: 50 Comm: kswapd0 Tainted: G W 4.12.14-kvmsmall #8 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x78/0xb7
print_irq_inversion_bug.part.38+0x19f/0x1aa
check_usage_forwards+0x102/0x120
? ret_from_fork+0x3a/0x50
? check_usage_backwards+0x110/0x110
mark_lock+0x16c/0x270
__lock_acquire+0x264/0x11c0
? pagevec_lookup_entries+0x1a/0x30
? truncate_inode_pages_range+0x2b3/0x7f0
lock_acquire+0xbd/0x1e0
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
__mutex_lock+0x4e/0x8c0
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
? btrfs_evict_inode+0x1f6/0x6a0 [btrfs]
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
? mem_cgroup_shrink_node+0x2c0/0x2c0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x3a/0x50
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 26 Mar 2018 22:59:12 +0000 (23:59 +0100)]
Btrfs: fix copy_items() return value when logging an inode
[ Upstream commit
8434ec46c6e3232cebc25a910363b29f5c617820 ]
When logging an inode, at tree-log.c:copy_items(), if we call
btrfs_next_leaf() at the loop which checks for the need to log holes, we
need to make sure copy_items() returns the value 1 to its caller and
not 0 (on success). This is because the path the caller passed was
released and is now different from what is was before, and the caller
expects a return value of 0 to mean both success and that the path
has not changed, while a return value of 1 means both success and
signals the caller that it can not reuse the path, it has to perform
another tree search.
Even though this is a case that should not be triggered on normal
circumstances or very rare at least, its consequences can be very
unpredictable (especially when replaying a log tree).
Fixes:
16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Tue, 27 Mar 2018 12:44:18 +0000 (20:44 +0800)]
btrfs: tests/qgroup: Fix wrong tree backref level
[ Upstream commit
3c0efdf03b2d127f0e40e30db4e7aa0429b1b79a ]
The extent tree of the test fs is like the following:
BTRFS info (device (null)): leaf
16327509003777336587 total ptrs 1 free space 3919
item 0 key (4096 168 4096) itemoff 3944 itemsize 51
extent refs 1 gen 1 flags 2
tree block key (
68719476736 0 0) level 1
^^^^^^^
ref#0: tree block backref root 5
And it's using an empty tree for fs tree, so there is no way that its
level can be 1.
For REAL (created by mkfs) fs tree backref with no skinny metadata, the
result should look like:
item 3 key (
30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51
refs 1 gen 4 flags TREE_BLOCK
tree block key (256 INODE_ITEM 0) level 0
^^^^^^^
tree block backref root 5
Fix the level to 0, so it won't break later tree level checker.
Fixes:
faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Mon, 26 Mar 2018 15:01:16 +0000 (01:01 +1000)]
powerpc/64s: sreset panic if there is no debugger or crash dump handlers
[ Upstream commit
d40b6768e45bd9213139b2d91d30c7692b6007b1 ]
system_reset_exception does most of its own crash handling now,
invoking the debugger or crash dumps if they are registered. If not,
then it goes through to die() to print stack traces, and then is
supposed to panic (according to comments).
However after die() prints oopses, it does its own handling which
doesn't allow system_reset_exception to panic (e.g., it may just
kill the current process). This patch causes sreset exceptions to
return from die after it prints messages but before acting.
This also stops die from invoking the debugger on 0x100 crashes.
system_reset_exception similarly calls the debugger. It had been
thought this was harmless (because if the debugger was disabled,
neither call would fire, and if it was enabled the first call
would return). However in some cases like xmon 'X' command, the
debugger returns 0, which currently causes it to be entered
again (first in system_reset_exception, then in die), which is
confusing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sun, 1 Apr 2018 17:26:29 +0000 (10:26 -0700)]
net: bgmac: Correctly annotate register space
[ Upstream commit
16a1c0646e55c3345bce8e4edfc06ad119d27c04 ]
All the members: base, idm_base and nicpm_base should be annotated with
__iomem since they are pointers to register space. This fixes a bunch of
sparse reported warnings.
Fixes:
f6a95a24957a ("net: ethernet: bgmac: Add platform device support")
Fixes:
dd5c5d037f5e ("net: ethernet: bgmac: add NS2 support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sun, 1 Apr 2018 17:26:30 +0000 (10:26 -0700)]
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
[ Upstream commit
60d6e6f0b9e422dd01aeda39257ee0428e5e2a3f ]
bgmac_dma_tx_ring_free() assigns the ctl1 word which is a litle endian
32-bit word without using proper accessors, fix this, and because a
length cannot be negative, use unsigned int while at it.
Fixes:
9cde94506eac ("bgmac: implement scatter/gather support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David S. Miller [Tue, 3 Apr 2018 15:24:35 +0000 (08:24 -0700)]
sparc64: Make atomic_xchg() an inline function rather than a macro.
[ Upstream commit
d13864b68e41c11e4231de90cf358658f6ecea45 ]
This avoids a lot of -Wunused warnings such as:
====================
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
./arch/sparc/include/asm/atomic_64.h:86:30: note: in expansion of macro ‘xchg’
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
^~~~
kernel/debug/debug_core.c:508:4: note: in expansion of macro ‘atomic_xchg’
atomic_xchg(&kgdb_active, cpu);
^~~~~~~~~~~
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 4 Apr 2018 12:41:26 +0000 (13:41 +0100)]
fscache: Fix hanging wait on page discarded by writeback
[ Upstream commit
2c98425720233ae3e135add0c7e869b32913502f ]
If the fscache asynchronous write operation elects to discard a page that's
pending storage to the cache because the page would be over the store limit
then it needs to wake the page as someone may be waiting on completion of
the write.
The problem is that the store limit may be updated by a different
asynchronous operation - and so may miss the write - and that the store
limit may not even get updated until later by the netfs.
Fix the kernel hang by making fscache_write_op() mark as written any pages
that are over the limit.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Graf [Tue, 3 Apr 2018 22:19:35 +0000 (00:19 +0200)]
lan78xx: Connect phy early
[ Upstream commit
92571a1aae40d291158d16e7142637908220f470 ]
When using wicked with a lan78xx device attached to the system, we
end up with ethtool commands issued on the device before an ifup
got issued. That lead to the following crash:
Unable to handle kernel NULL pointer dereference at virtual address
0000039c
pgd =
ffff800035b30000
[
0000039c] *pgd=
0000000000000000
Internal error: Oops:
96000004 [#1] SMP
Modules linked in: [...]
Supported: Yes
CPU: 3 PID: 638 Comm: wickedd Tainted: G E 4.12.14-0-default #1
Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018
task:
ffff800035e74180 task.stack:
ffff800036718000
PC is at phy_ethtool_ksettings_get+0x20/0x98
LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
pc : [<
ffff0000086f7f30>] lr : [<
ffff000000dcca84>] pstate:
20000005
sp :
ffff80003671bb20
x29:
ffff80003671bb20 x28:
ffff800035e74180
x27:
ffff000008912000 x26:
000000000000001d
x25:
0000000000000124 x24:
ffff000008f74d00
x23:
0000004000114809 x22:
0000000000000000
x21:
ffff80003671bbd0 x20:
0000000000000000
x19:
ffff80003671bbd0 x18:
000000000000040d
x17:
0000000000000001 x16:
0000000000000000
x15:
0000000000000000 x14:
ffffffffffffffff
x13:
0000000000000000 x12:
0000000000000020
x11:
0101010101010101 x10:
fefefefefefefeff
x9 :
7f7f7f7f7f7f7f7f x8 :
fefefeff31677364
x7 :
0000000080808080 x6 :
ffff80003671bc9c
x5 :
ffff80003671b9f8 x4 :
ffff80002c296190
x3 :
0000000000000000 x2 :
0000000000000000
x1 :
ffff80003671bbd0 x0 :
ffff80003671bc00
Process wickedd (pid: 638, stack limit = 0xffff800036718000)
Call trace:
Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20)
b9e0:
ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000
ba00:
ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080
ba20:
fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101
ba40:
0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000
ba60:
0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0
ba80:
0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809
baa0:
ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000
bac0:
ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20
bae0:
ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900
bb00:
0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30
[<
ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98
[<
ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
[<
ffff0000087cbc40>] ethtool_get_settings+0x68/0x210
[<
ffff0000087cc0d4>] dev_ethtool+0x214/0x2180
[<
ffff0000087e5008>] dev_ioctl+0x400/0x630
[<
ffff00000879dd00>] sock_do_ioctl+0x70/0x88
[<
ffff00000879f5f8>] sock_ioctl+0x208/0x368
[<
ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848
[<
ffff0000082ce634>] SyS_ioctl+0x8c/0xa8
Exception stack(0xffff80003671bec0 to 0xffff80003671c000)
bec0:
0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465
bee0:
0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465
bf00:
000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f
bf20:
0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68
bf40:
0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0
bf60:
0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000
bf80:
0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00
bfa0:
0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0
bfc0:
0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d
bfe0:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
The culprit is quite simple: The driver tries to access the phy left and right,
but only actually has a working reference to it when the device is up.
The fix thus is quite simple too: Get a reference to the phy on probe already
and keep it even when the device is going down.
With this patch applied, I can successfully run wicked on my system and bring
the interface up and down as many times as I want, without getting NULL pointer
dereferences in between.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Fri, 23 Mar 2018 16:34:00 +0000 (09:34 -0700)]
KVM: VMX: raise internal error for exception during invalid protected mode state
[ Upstream commit
add5ff7a216ee545a214013f26d1ef2f44a9c9f8 ]
Exit to userspace with KVM_INTERNAL_ERROR_EMULATION if we encounter
an exception in Protected Mode while emulating guest due to invalid
guest state. Unlike Big RM, KVM doesn't support emulating exceptions
in PM, i.e. PM exceptions are always injected via the VMCS. Because
we will never do VMRESUME due to emulation_required, the exception is
never realized and we'll keep emulating the faulting instruction over
and over until we receive a signal.
Exit to userspace iff there is a pending exception, i.e. don't exit
simply on a requested event. The purpose of this check and exit is to
aid in debugging a guest that is in all likelihood already doomed.
Invalid guest state in PM is extremely limited in normal operation,
e.g. it generally only occurs for a few instructions early in BIOS,
and any exception at this time is all but guaranteed to be fatal.
Non-vectored interrupts, e.g. INIT, SIPI and SMI, can be cleanly
handled/emulated, while checking for vectored interrupts, e.g. INTR
and NMI, without hitting false positives would add a fair amount of
complexity for almost no benefit (getting hit by lightning seems
more likely than encountering this specific scenario).
Add a WARN_ON_ONCE to vmx_queue_exception() if we try to inject an
exception via the VMCS and emulation_required is true.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sai Praneeth [Wed, 4 Apr 2018 19:34:19 +0000 (12:34 -0700)]
x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush()
[ Upstream commit
162ee5a8ab49be40d253f90e94aef712470a3a24 ]
Linus reported the following boot warning:
WARNING: CPU: 0 PID: 0 at arch/x86/include/asm/tlbflush.h:134 load_new_mm_cr3+0x114/0x170
[...]
Call Trace:
switch_mm_irqs_off+0x267/0x590
switch_mm+0xe/0x20
efi_switch_mm+0x3e/0x50
efi_enter_virtual_mode+0x43f/0x4da
start_kernel+0x3bf/0x458
secondary_startup_64+0xa5/0xb0
... after merging:
03781e40890c: x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3
When the platform supports PCID and if CONFIG_DEBUG_VM=y is enabled,
build_cr3_noflush() (called via switch_mm()) does a sanity check to see
if X86_FEATURE_PCID is set.
Presently, build_cr3_noflush() uses "this_cpu_has(X86_FEATURE_PCID)" to
perform the check but this_cpu_has() works only after SMP is initialized
(i.e. per cpu cpu_info's should be populated) and this happens to be very
late in the boot process (during rest_init()).
As efi_runtime_services() are called during (early) kernel boot time
and run time, modify build_cr3_noflush() to use boot_cpu_has() all the
time. As suggested by Dave Hansen, this should be OK because all CPU's have
same capabilities on x86.
With this change the warning is fixed.
( Dave also suggested that we put a warning in this_cpu_has() if it's used
early in the boot process. This is still work in progress as it affects
MCE. )
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Lee Chun-Yi <jlee@suse.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1522870459-7432-1-git-send-email-sai.praneeth.prakhya@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davidlohr Bueso [Mon, 2 Apr 2018 16:49:54 +0000 (09:49 -0700)]
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
[ Upstream commit
d29a20645d5e929aa7e8616f28e5d8e1c49263ec ]
While running rt-tests' pi_stress program I got the following splat:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 27 PID: 0 at kernel/sched/sched.h:960 assert_clock_updated.isra.38.part.39+0x13/0x20
[...]
<IRQ>
enqueue_top_rt_rq+0xf4/0x150
? cpufreq_dbs_governor_start+0x170/0x170
sched_rt_rq_enqueue+0x65/0x80
sched_rt_period_timer+0x156/0x360
? sched_rt_rq_enqueue+0x80/0x80
__hrtimer_run_queues+0xfa/0x260
hrtimer_interrupt+0xcb/0x220
smp_apic_timer_interrupt+0x62/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
[...]
do_idle+0x183/0x1e0
cpu_startup_entry+0x5f/0x70
start_secondary+0x192/0x1d0
secondary_startup_64+0xa5/0xb0
We can get rid of it be the "traditional" means of adding an
update_rq_clock() call after acquiring the rq->lock in
do_sched_rt_period_timer().
The case for the RT task throttling (which this workload also hits)
can be ignored in that the skip_update call is actually bogus and
quite the contrary (the request bits are removed/reverted).
By setting RQCF_UPDATED we really don't care if the skip is happening
or not and will therefore make the assert_clock_updated() check happy.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180402164954.16255-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>