Paolo Valente [Tue, 9 Jan 2018 09:27:58 +0000 (10:27 +0100)]
block, bfq: put async queues for root bfq groups too
[ Upstream commit
52257ffbfcaf58d247b13fb148e27ed17c33e526 ]
For each pair [device for which bfq is selected as I/O scheduler,
group in blkio/io], bfq maintains a corresponding bfq group. Each such
bfq group contains a set of async queues, with each async queue
created on demand, i.e., when some I/O request arrives for it. On
creation, an async queue gets an extra reference, to make sure that
the queue is not freed as long as its bfq group exists. Accordingly,
to allow the queue to be freed after the group exited, this extra
reference must released on group exit.
The above holds also for a bfq root group, i.e., for the bfq group
corresponding to the root blkio/io root for a given device. Yet, by
mistake, the references to the existing async queues of a root group
are not released when the latter exits. This causes a memory leak when
the instance of bfq for a given device exits. In a similar vein,
bfqg_stats_xfer_dead is not executed for a root group.
This commit fixes bfq_pd_offline so that the latter executes the above
missing operations for a root group too.
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reported-by: Guoqing Jiang <gqjiang@suse.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Davide Ferrari <davideferrari8@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Wed, 3 Jan 2018 18:18:03 +0000 (10:18 -0800)]
tty: n_gsm: Allow ADM response in addition to UA for control dlci
[ Upstream commit
ea3d8465ab9b3e01be329ac5195970a84bef76c5 ]
Some devices have the control dlci stay in ADM mode instead of the UA
mode. This can seen at least on droid 4 when trying to open the ts
27.010 mux port. Enabling n_gsm debug mode shows the control dlci
always respond with DM to SABM instead of UA:
# modprobe n_gsm debug=0xff
# ldattach -d GSM0710 /dev/ttyS0 &
gsmld_output:
00000000: f9 03 3f 01 1c f9
--> 0) C: SABM(P)
gsmld_receive:
00000000: f9 03 1f 01 36 f9
<-- 0) C: DM(P)
...
$ minicom -D /dev/gsmtty1
minicom: cannot open /dev/gsmtty1: No error information
$ strace minicom -D /dev/gsmtty1
...
open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT
Note that this is different issue from other n_gsm -EL2HLT issues such
as timeouts when the control dlci does not respond at all.
The ADM mode seems to be a quite common according to "RF Wireless World"
article "GSM Issue-UE sends SABM and gets a DM response instead of
UA response":
This issue is most commonly observed in GSM networks where in UE sends
SABM and expects network to send UA response but it ends up receiving
DM response from the network. SABM stands for Set asynchronous balanced
mode, UA stands for Unnumbered Acknowledge and DA stands for
Disconnected Mode.
An RLP entity can be in one of two modes:
- Asynchronous Balanced Mode (ABM)
- Asynchronous Disconnected Mode (ADM)
Currently Linux kernel closes the control dlci after several retries
in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce
error code -EL2HLT when trying to open them as the closing of control
dlci has already set gsm->dead.
Let's fix the issue by allowing control dlci stay in ADM mode after the
retries so the /dev/gsmtty ports can be opened and used. It seems that
it might take several attempts to get any response from the control
dlci, so it's best to allow ADM mode only after the SABM retries are
done.
Note that for droid 4 additional patches are needed to mux the ttyS0
pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also
needed to use n_gsm. And the mdm6600 modem needs to be powered on.
Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Tue, 9 Jan 2018 13:28:29 +0000 (21:28 +0800)]
blk-mq: fix kernel oops in blk_mq_tag_idle()
[ Upstream commit
8ab0b7dc73e1b3e2987d42554b2bff503f692772 ]
HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(),
then we need to check it before calling blk_mq_tag_idle(), otherwise
the following kernel oops can be triggered, so fix it by checking if
the hw queue is unmapped since it doesn't make sense to idle the tags
any more after hw queues are unmapped.
[ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma]
[ 440.779104] task:
ffff894bae755ee0 ti:
ffff893bf9bc8000 task.ti:
ffff893bf9bc8000
[ 440.788359] RIP: 0010:[<
ffffffffb730e2b4>] [<
ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[ 440.798697] RSP: 0018:
ffff893bf9bcbd10 EFLAGS:
00010286
[ 440.805538] RAX:
0000000000000000 RBX:
ffff895bb131dc00 RCX:
000000000000011f
[ 440.814426] RDX:
00000000ffffffff RSI:
0000000000000120 RDI:
ffff895bb131dc00
[ 440.823301] RBP:
ffff893bf9bcbd10 R08:
000000000001b860 R09:
4a51d361c00c0000
[ 440.832193] R10:
b5907f32b4cc7003 R11:
ffffd6cabfb57000 R12:
ffff894bafd1e008
[ 440.841091] R13:
0000000000000001 R14:
ffff895baf770000 R15:
0000000000000080
[ 440.849988] FS:
0000000000000000(0000) GS:
ffff894bbdcc0000(0000) knlGS:
0000000000000000
[ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 440.867274] CR2:
0000000000000008 CR3:
000000103d098000 CR4:
00000000001407e0
[ 440.876169] Call Trace:
[ 440.879818] [<
ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0
[ 440.887051] [<
ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160
[ 440.894465] [<
ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150
[ 440.901881] [<
ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core]
[ 440.910068] [<
ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core]
[ 440.919026] [<
ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma]
[ 440.928079] [<
ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma]
[ 440.937126] [<
ffffffffb70ab58a>] process_one_work+0x17a/0x440
[ 440.944517] [<
ffffffffb70ac3a8>] worker_thread+0x278/0x3c0
[ 440.951607] [<
ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0
[ 440.959760] [<
ffffffffb70b352f>] kthread+0xcf/0xe0
[ 440.966055] [<
ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[ 440.973715] [<
ffffffffb76d8658>] ret_from_fork+0x58/0x90
[ 440.980586] [<
ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f
[ 441.011620] RIP [<
ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[ 441.019301] RSP <
ffff893bf9bcbd10>
[ 441.024052] CR2:
0000000000000008
Reported-by: Zhang Yi <yizhan@redhat.com>
Tested-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chenxiang [Thu, 4 Jan 2018 13:04:33 +0000 (21:04 +0800)]
scsi: libsas: initialize sas_phy status according to response of DISCOVER
[ Upstream commit
affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ]
The status of SAS PHY is in sas_phy->enabled. There is an issue that the
status of a remote SAS PHY may be initialized incorrectly: if disable
remote SAS PHY through sysfs interface (such as echo 0 >
/sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we
will find the status of remote SAS PHY which is disabled before is
1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of
remote SAS PHY is disabled and the device attached is not found.
In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response
is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled
according to the value of NEGOTIATED LOGICAL LINK RATE field.
Signed-off-by: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Thu, 4 Jan 2018 13:04:32 +0000 (21:04 +0800)]
scsi: libsas: fix error when getting phy events
[ Upstream commit
2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ]
The intend purpose here was to goto out if smp_execute_task() returned
error. Obviously something got screwed up. We will never get these link
error statistics below:
~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count
0
Obviously we should goto error handler if smp_execute_task() returns
non-zero.
Fixes:
2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Yan [Thu, 4 Jan 2018 13:04:31 +0000 (21:04 +0800)]
scsi: libsas: fix memory leak in sas_smp_get_phy_events()
[ Upstream commit
4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ]
We've got a memory leak with the following producer:
while true;
do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null;
done
The buffer req is allocated and not freed after we return. Fix it.
Fixes:
2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tang Junhui [Mon, 8 Jan 2018 20:21:21 +0000 (12:21 -0800)]
bcache: segregate flash only volume write streams
[ Upstream commit
4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ]
In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |
So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.
In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.
Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.
[mlyle: fixed commit log formatting, permissions, line endings]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tang Junhui [Mon, 8 Jan 2018 20:21:19 +0000 (12:21 -0800)]
bcache: stop writeback thread after detaching
[ Upstream commit
8d29c4426b9f8afaccf28de414fde8a722b35fdf ]
Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo
ba0fb5cd-658a-4533-9806-
6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.
Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.
[edit by mlyle: commit log spelling/formatting]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rui Hua [Mon, 8 Jan 2018 20:21:18 +0000 (12:21 -0800)]
bcache: ret IOERR when read meets metadata error
[ Upstream commit
b221fc130c49c50f4c2250d22e873420765a9fa2 ]
The read request might meet error when searching the btree, but the error
was not handled in cache_lookup(), and this kind of metadata failure will
not go into cached_dev_read_error(), finally, the upper layer will receive
bi_status=0. In this patch we judge the metadata error by the return
value of bch_btree_map_keys(), there are two potential paths give rise to
the error:
1. Because the btree is not totally cached in memery, we maybe get error
when read btree node from cache device (see bch_btree_node_get()), the
likely errno is -EIO, -ENOMEM
2. When read miss happens, bch_btree_insert_check_key() will be called to
insert a "replace_key" to btree(see cached_dev_cache_miss(), just for
doing preparatory work before insert the missed data to cache device),
a failure can also happen in this situation, the likely errno is
-ENOMEM
bch_btree_map_keys() will return MAP_DONE in normal scenario, but we will
get either -EIO or -ENOMEM in above two cases. if this happened, we should
NOT recover data from backing device (when cache device is dirty) because
we don't know whether bkeys the read request covered are all clean. And
after that happened, s->iop.status is still its initially value(0) before
we submit s->bio.bio, we set it to BLK_STS_IOERR, so it can go into
cached_dev_read_error(), and finally it can be passed to upper layer, or
recovered by reread from backing device.
[edit by mlyle: patch formatting, word-wrap, comment spelling,
commit log format]
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fuyun Liang [Fri, 5 Jan 2018 10:18:20 +0000 (18:18 +0800)]
net: hns3: fix for changing MTU
[ Upstream commit
5bad95a1e55f4d5bb41e130db859d57eaf1b1549 ]
when changing MTU, The new MTU must need to be set to netdevice.
Fixes:
a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian Shen [Fri, 5 Jan 2018 10:18:14 +0000 (18:18 +0800)]
net: hns3: Fix an error macro definition of HNS3_TQP_STAT
[ Upstream commit
57ffee737b36dbb81e8e60a37e01791553157a5e ]
The member "stats_offset" was designed to indicate the offset
of each member of struct ring_stats in struct hns3_enet_ring,
but forgot to add the offset of the member in struct ring_stats.
Fixes:
496d03e960a ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian Shen [Fri, 5 Jan 2018 10:18:13 +0000 (18:18 +0800)]
net: hns3: Fix a loop index error of tqp statistics query
[ Upstream commit
94bfaafac9d2a3c0bcca00d01e38f7597b741799 ]
An error loop index was used while querying statistics data
of tqps, which may cause call trace.
Fixes:
496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian Shen [Fri, 5 Jan 2018 10:18:12 +0000 (18:18 +0800)]
net: hns3: Fix an error of total drop packet statistics
[ Upstream commit
d2a5dca8404871be683c6bbc175ebf9c56dd2865 ]
The dropped tx/rx packets number of each tqp should also
be counted into the total drop tx/rx packets numbers.
Fixes:
76ad4f0ee74 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Jurgens [Thu, 4 Jan 2018 15:25:31 +0000 (17:25 +0200)]
net/mlx5: Fix race for multiple RoCE enable
[ Upstream commit
734dc065fc41f6143ff88225aa5d335cb1e0f6aa ]
There are two potential problems with the existing implementation.
1. Enable and disable can race after the atomic operations.
2. If a command fails the refcount is left in an inconsistent state.
Introduce a lock and perform error checking.
Fixes:
a6f7d2aff623 ("net/mlx5: Add support for multiple RoCE enable")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 26 Dec 2017 17:33:18 +0000 (17:33 +0000)]
wl1251: check return from call to wl1251_acx_arp_ip_filter
[ Upstream commit
ac1181c60822292176ab96912208ec9f9819faf8 ]
Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.
Detected by CoverityScan, CID#1164835 ("Logically dead code")
Fixes:
204cc5c44fb6 ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanislaw Gruszka [Tue, 19 Dec 2017 11:33:56 +0000 (12:33 +0100)]
rt2x00: do not pause queue unconditionally on error path
[ Upstream commit
6dd80efd75ce7c2dbd9f117cf585ee2b33a42ee1 ]
Pausing queue without checking threshold is racy with txdone path.
Moreover we do not need pause queue on any error, but only if queue
is full - in case when we send RTS frame ( other cases of almost full
queue are already handled in rt2x00queue_write_tx_frame() ).
Patch fixes of theoretically possible problem of pausing empty
queue.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 26 Dec 2017 12:59:09 +0000 (13:59 +0100)]
power: supply: axp288_charger: Properly stop work on probe-error / remove
[ Upstream commit
165c2357744e41391902a2a72dd170beb60c28d5 ]
Properly stop any work we may have queued on probe-errors / remove.
Rather then adding a remove driver callback for this, and goto style
error handling to probe, use a devm_action for this.
The devm_action gets registered before we register any of the extcon
notifiers which may queue the work, devm does cleanup in reverse order,
so this ensures that the notifiers are removed before we cancel the work.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Sat, 6 Jan 2018 20:18:24 +0000 (21:18 +0100)]
ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'
[ Upstream commit
eaadb1caa966a91128297b754e90b7c92b350a00 ]
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.
Fix it and return the error code if such an error paths is taken.
Fixes:
3d9ff34622ba ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 18 Dec 2017 23:01:47 +0000 (10:01 +1100)]
staging: lustre: disable preempt while sampling processor id.
[ Upstream commit
dbeccabf5294e80f7cc9ee566746c42211bed736 ]
Calling smp_processor_id() without disabling preemption
triggers a warning (if CONFIG_DEBUG_PREEMPT).
I think the result of cfs_cpt_current() is only used as a hint for
load balancing, rather than as a precise and stable indicator of
the current CPU. So it doesn't need to be called with
preemption disabled.
So disable preemption inside cfs_cpt_current() to silence the warning.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jin Yao [Tue, 26 Dec 2017 10:42:43 +0000 (18:42 +0800)]
perf report: Fix a no annotate browser displayed issue
[ Upstream commit
40c39e3046411f84bab82f66783ff3593e2bcd9b ]
When enabling '-b' option in perf record, for example,
perf record -b ...
perf report
and then browsing the annotate browser from perf report (press 'A'), it
would fail (annotate browser can't be displayed).
It's because the '.add_entry_cb' op of struct report is overwritten by
hist_iter__branch_callback() in builtin-report.c. But this function doesn't do
something like mapping symbols and sources. So next, do_annotate() will return
directly.
notes = symbol__annotation(act->ms.sym);
if (!notes->src)
return 0;
This patch adds the lost code to hist_iter__branch_callback (refer to
hist_iter__report_callback).
v2:
Fix a crash bug when perform 'perf report --stdio'.
The reason is that we init the symbol annotation only in browser mode, it
doesn't allocate/init resources for stdio mode.
So now in hist_iter__branch_callback(), it will return directly if it's not in
browser mode.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1514284963-18587-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Martinez Canillas [Thu, 30 Nov 2017 07:39:07 +0000 (08:39 +0100)]
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented
[ Upstream commit
095531f891e627e408606f2da4008d3d53e6748a ]
According to the TPM Library Specification, a TPM device must do a command
header validation before processing and return a TPM_RC_COMMAND_CODE code
if the command is not implemented.
So user-space will expect to handle that response as an error. But if the
in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is
returned instead if the command isn't implemented. This confuses userspace
since it doesn't expect that error value.
This also isn't consistent with the behavior when not using TPM spaces and
accessing the TPM directly (/dev/tpm?). In this case, the command is sent
to the TPM even when not implemented and the TPM responds with an error.
Instead of returning an -EINVAL errno code when the tpm_validate_command()
function fails, synthesize a TPM command response so user-space can get a
TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command.
The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and
TAB specifications define that higher layers in the stack should use some
of the unused 20 bits to specify from which level of the stack the error
is coming from.
Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource
manager, set the error level to the TAB/RM layer so user-space is aware of
this.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: William Roberts <william.c.roberts@intel.com>
Reviewed-by: Philip Tricca <philip.b.tricca@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Thu, 30 Nov 2017 00:47:30 +0000 (16:47 -0800)]
nvme_fcloop: fix abort race condition
[ Upstream commit
278e096063f1914fccfc77a617be9fc8dbb31b0e ]
A test case revealed a race condition of an i/o completing on a thread
parallel to the delete_association generating the aborts for the
outstanding ios on the controller. The i/o completion was freeing the
target fcloop context, thus the abort task referenced the just-freed
memory.
Correct by clearing the target/initiator cross pointers in the io
completion and abort tasks before calling the callbacks. On aborts
that detect already finished io's, ensure the complete context is
called.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Thu, 30 Nov 2017 00:47:31 +0000 (16:47 -0800)]
nvme_fcloop: disassocate local port structs
[ Upstream commit
6fda20283e55b9d288cd56822ce39fc8e64f2208 ]
The current fcloop driver gets its lport structure from the private
area co-allocated with the fc_localport. All is fine except the
teardown path, which wants to wait on the completion, which is marked
complete by the delete_localport callback performed after
unregister_localport. The issue is, the nvme_fc transport frees the
localport structure immediately after delete_localport is called,
meaning the original routine is trying to wait on a complete that
was just freed.
Change such that a lport struct is allocated coincident with the
addition and registration of a localport. The private area of the
localport now contains just a backpointer to the real lport struct.
Now, the completion can be waited for, and after completing, the
new structure can be kfree'd.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 1 Jan 2018 12:23:57 +0000 (13:23 +0100)]
pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts
[ Upstream commit
9291c65b01d1c67ebd56644cb19317ad665c44b3 ]
On some systems, some PCB traces attached to GpioInts are routed in such
a way that they pick up enough interference to constantly (many times per
second) trigger.
Enabling glitch-filtering fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Jarzmik [Thu, 28 Dec 2017 08:27:41 +0000 (09:27 +0100)]
backlight: tdo24m: Fix the SPI CS between transfers
[ Upstream commit
2023b0524a6310e9ea80daf085f51c71bff9289f ]
Currently the LCD display (TD035S) on the cm-x300 platform is broken and
remains blank.
The TD0245S specification requires that the chipselect is toggled
between commands sent to the panel. This was also the purpose of the
former patch of commit
f64dcac0b124 ("backlight: tdo24m: ensure chip
select changes between transfers").
Unfortunately, the "cs_change" field of a SPI transfer is
misleading. Its true meaning is that for a SPI message holding multiple
transfers, the chip select is toggled between each transfer, but for the
last transfer it remains asserted.
In this driver, all the SPI messages contain exactly one transfer, which
means that each transfer is the last of its message, and as a
consequence the chip select is never toggled.
Actually, there was a second bug hidding the first one, hence the
problem was not seen until v4.6. This problem was fixed by commit
a52db659c79c ("spi: pxa2xx: Fix cs_change management") for PXA based
boards.
This fix makes the TD035S work again on a cm-x300 board. The same
applies to other PXA boards, ie. corgi and tosa.
Fixes:
a52db659c79c ("spi: pxa2xx: Fix cs_change management")
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Sat, 6 Jan 2018 08:27:40 +0000 (16:27 +0800)]
blk-mq: fix race between updating nr_hw_queues and switching io sched
[ Upstream commit
fb350e0ad99359768e1e80b4784692031ec340e4 ]
In both elevator_switch_mq() and blk_mq_update_nr_hw_queues(), sched tags
can be allocated, and q->nr_hw_queue is used, and race is inevitable, for
example: blk_mq_init_sched() may trigger use-after-free on hctx, which is
freed in blk_mq_realloc_hw_ctxs() when nr_hw_queues is decreased.
This patch fixes the race be holding q->sysfs_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Sat, 6 Jan 2018 08:27:39 +0000 (16:27 +0800)]
blk-mq: avoid to map CPU into stale hw queue
[ Upstream commit
7d4901a90d02500c8011472a060f9b2e60e6e605 ]
blk_mq_pci_map_queues() may not map one CPU into any hw queue, but its
previous map isn't cleared yet, and may point to one stale hw queue
index.
This patch fixes the following issue by clearing the mapping table before
setting it up in blk_mq_pci_map_queues().
This patches fixes this following issue reported by Zhang Yi:
[ 101.202734] BUG: unable to handle kernel NULL pointer dereference at
0000000094d3013f
[ 101.211487] IP: blk_mq_map_swqueue+0xbc/0x200
[ 101.216346] PGD 0 P4D 0
[ 101.219171] Oops: 0000 [#1] SMP
[ 101.222674] Modules linked in: sunrpc ipmi_ssif vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore mxm_wmi intel_rapl_perf iTCO_wdt ipmi_si ipmi_devintf pcspkr iTCO_vendor_support sg dcdbas ipmi_msghandler wmi mei_me lpc_ich shpchp mei acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel libata tg3 nvme nvme_core megaraid_sas ptp i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 101.284881] CPU: 0 PID: 504 Comm: kworker/u25:5 Not tainted 4.15.0-rc2 #1
[ 101.292455] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[ 101.301001] Workqueue: nvme-wq nvme_reset_work [nvme]
[ 101.306636] task:
00000000f2c53190 task.stack:
000000002da874f9
[ 101.313241] RIP: 0010:blk_mq_map_swqueue+0xbc/0x200
[ 101.318681] RSP: 0018:
ffffc9000234fd70 EFLAGS:
00010282
[ 101.324511] RAX:
ffff88047ffc9480 RBX:
ffff88047e130850 RCX:
0000000000000000
[ 101.332471] RDX:
ffffe8ffffd40580 RSI:
ffff88047e509b40 RDI:
ffff88046f37a008
[ 101.340432] RBP:
000000000000000b R08:
ffff88046f37a008 R09:
0000000011f94280
[ 101.348392] R10:
ffff88047ffd4d00 R11:
0000000000000000 R12:
ffff88046f37a008
[ 101.356353] R13:
ffff88047e130f38 R14:
000000000000000b R15:
ffff88046f37a558
[ 101.364314] FS:
0000000000000000(0000) GS:
ffff880277c00000(0000) knlGS:
0000000000000000
[ 101.373342] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 101.379753] CR2:
0000000000000098 CR3:
000000047f409004 CR4:
00000000001606f0
[ 101.387714] Call Trace:
[ 101.390445] blk_mq_update_nr_hw_queues+0xbf/0x130
[ 101.395791] nvme_reset_work+0x6f4/0xc06 [nvme]
[ 101.400848] ? pick_next_task_fair+0x290/0x5f0
[ 101.405807] ? __switch_to+0x1f5/0x430
[ 101.409988] ? put_prev_entity+0x2f/0xd0
[ 101.414365] process_one_work+0x141/0x340
[ 101.418836] worker_thread+0x47/0x3e0
[ 101.422921] kthread+0xf5/0x130
[ 101.426424] ? rescuer_thread+0x380/0x380
[ 101.430896] ? kthread_associate_blkcg+0x90/0x90
[ 101.436048] ret_from_fork+0x1f/0x30
[ 101.440034] Code: 48 83 3c ca 00 0f 84 2b 01 00 00 48 63 cd 48 8b 93 10 01 00 00 8b 0c 88 48 8b 83 20 01 00 00 4a 03 14 f5 60 04 af 81 48 8b 0c c8 <48> 8b 81 98 00 00 00 f0 4c 0f ab 30 8b 81 f8 00 00 00 89 42 44
[ 101.461116] RIP: blk_mq_map_swqueue+0xbc/0x200 RSP:
ffffc9000234fd70
[ 101.468205] CR2:
0000000000000098
[ 101.471907] ---[ end trace
5fe710f98228a3ca ]---
[ 101.482489] Kernel panic - not syncing: Fatal exception
[ 101.488505] Kernel Offset: disabled
[ 101.497752] ---[ end Kernel panic - not syncing: Fatal exception
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Tue, 19 Dec 2017 03:57:06 +0000 (19:57 -0800)]
IB/rdmavt: Allocate CQ memory on the correct node
[ Upstream commit
db9a2c6f9b6196b889b98e961cb9a37617b11ccf ]
CQ allocation does not ensure that completion queue entries
and the completion queue structure are allocated on the correct
numa node.
Fix by allocating the rvt_cq and kernel CQ entries on the device node,
leaving the user CQ entries on the default local node. Also ensure
CQ resizes use the correct allocator when extending a CQ.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gautham R. Shenoy [Wed, 13 Dec 2017 06:57:39 +0000 (12:27 +0530)]
powernv-cpufreq: Add helper to extract pstate from PMSR
[ Upstream commit
ee1f4a7dafa997816ff3de96155c6f3edc21c1e6 ]
On POWERNV platform, the fields for pstates in the Power Management
Status Register (PMSR) and the Power Management Control Register
(PMCR) are 8-bits wide. On POWER8 the pstates are negatively numbered
while on POWER9 they are positively numbered.
The device-tree exports pstates as 32-bit entries. The device-tree
implementation sign-extends the 8-bit pstate values to obtain the
corresponding 32-bit entry.
Eg: On POWER8, a pstate value 0x82 [-126] is represented in the
device-tree as 0xfffffff82 while on POWER9, the same value 0x82 [130]
is represented in the device-tree as 0x00000082.
The powernv-cpufreq driver implementation represents pstates using the
integer type. In multiple places in the driver, the code interprets
the pstates extracted from the PMSR as a signed byte and assigns it to
a integer variable to get the sign-extention.
On POWER9 platforms which have greater than 128 pstates, this results
in the driver performing incorrect sign-extention, and thereby
treating a legitimate pstate (say 130) as an invalid pstates (since it
is interpreted as -126).
This patch fixes the issue by implementing a helper function to
extract Pstates from PMSR register, and correctly sign-extend it to be
consistent with the values provided by the device-tree.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Thu, 4 Jan 2018 21:31:11 +0000 (22:31 +0100)]
gpio: label descriptors using the device name
[ Upstream commit
24e78079bf2250874e33da2e7cfbb6db72d3caf4 ]
Some GPIO lines appear named "?" in the lsgpio dump due to their
requesting drivers not passing a reasonable label.
Most typically this happens if a device tree node just defines
gpios = <...> and not foo-gpios = <...>, the former gets named
"foo" and the latter gets named "?".
However the struct device passed in is always valid so let's
just label the GPIO with dev_name() on the device if no proper
label was passed.
Cc: Reported-by: Jason Kridner <jkridner@beagleboard.org>
Reported-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pieter \"PoroCYon\" Sluys [Thu, 4 Jan 2018 15:53:50 +0000 (16:53 +0100)]
vfb: fix video mode and line_length being set when loaded
[ Upstream commit
7b9faf5df0ac495a1a3d7cdb64921c179f9008ac ]
Currently, when loading the vfb module, the newly created fbdev
has a line_length of 0, and its video mode would be PSEUDOCOLOR
regardless of color depth. (The former could be worked around by
calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE
flag set.) This patch automatically sets the line_length correctly,
and the video mode is derived from the bit depth now as well.
Thanks to Geert Uytterhoeven for confirming the bug and helping me with
the patch.
Output of `fbset -i' before the patch:
mode "1366x768-60"
# D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
geometry 1366 768 1366 768 32
timings 13806 120 10 14 3 32 5
rgba 8/0,8/8,8/16,8/24
endmode
Frame buffer device information:
Name : Virtual FB
Address : 0xffffaa1405d85000
Size : 4196352
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 1
LineLength : 0 <-- note this
Accelerator : No
After:
mode "1366x768-60"
# D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
geometry 1366 768 1366 768 32
timings 13806 120 10 14 3 32 5
rgba 8/0,8/8,8/16,8/24
endmode
Frame buffer device information:
Name : Virtual FB
Address : 0xffffaa1405d85000
Size : 4196352
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 1
LineLength : 5464
Accelerator : No
Signed-off-by: "Pieter \"PoroCYon\" Sluys" <pcy@national.shitposting.agency>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
[b.zolnierkie: minor fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Große [Wed, 13 Dec 2017 17:29:46 +0000 (18:29 +0100)]
mac80211: Fix setting TX power on monitor interfaces
[ Upstream commit
3a3713ec360138f806c6fc368d1de570f692b347 ]
Instead of calling ieee80211_recalc_txpower on monitor interfaces
directly, call it using the virtual monitor interface, if one exists.
In case of a single monitor interface given, reject setting TX power,
if no virtual monitor interface exists.
That being checked, don't warn in ieee80211_bss_info_change_notify,
after setting TX power on a monitor interface.
Fixes warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167
ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo
videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core
rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O)
vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm
irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0
PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task:
ffff880186fd5cc0 task.stack:
ffffc90001b54000 RIP:
0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:
ffffc90001b57a10
EFLAGS:
00010246 RAX:
0000000000000006 RBX:
ffff8801052ce840 RCX:
0000000000000064 RDX:
00000000fffffffc RSI:
0000000000040000 RDI:
ffff8801052ce840 RBP:
ffffc90001b57a38 R08:
0000000000000062 R09:
0000000000000000 R10:
ffff8802144b5000 R11:
ffff880049dc4614 R12:
0000000000040000 R13:
0000000000000064 R14:
ffff8802105f0760 R15:
ffffc90001b57b48 FS:
00007f92644b4580(0000) GS:
ffff88021e200000(0000)
knlGS:
0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f9263c109f0 CR3:
00000001df850000 CR4:
00000000000406f0
Call Trace:
ieee80211_recalc_txpower+0x33/0x40
ieee80211_set_tx_power+0x40/0x180
nl80211_set_wiphy+0x32e/0x950
Reported-by: Peter Große <pegro@friiks.de>
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Tue, 2 Jan 2018 15:26:31 +0000 (16:26 +0100)]
ACPI: EC: Fix debugfs_create_*() usage
[ Upstream commit
3522f867c13b63cf62acdf1b8ca5664c549a716a ]
acpi_ec.gpe is "unsigned long", hence treating it as "u32" would expose
the wrong half on big-endian 64-bit systems. Fix this by changing its
type to "u32" and removing the cast, as all other code already uses u32
or sometimes even only u8.
Fixes:
1195a098168fcacf (ACPI: Provide /sys/kernel/debug/ec/...)
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shanker Donthineni [Tue, 5 Dec 2017 19:16:21 +0000 (13:16 -0600)]
irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry
[ Upstream commit
ebe2f8718007d5a1238bb3cb8141b5bb2b4d5773 ]
The ACPI specification says OS shouldn't attempt to use GICC configuration
parameters if the flag ACPI_MADT_ENABLED is cleared. The ARM64-SMP code
skips the disabled GICC entries but not causing any issue. However the
current GICv3 driver probe bails out causing kernel panic() instead of
skipping the disabled GICC interfaces. This issue happens on systems
where redistributor regions are not in the always-on power domain and
one of GICC interface marked with ACPI_MADT_ENABLED=0.
This patch does the two things to fix the panic.
- Don't return an error in gic_acpi_match_gicc() for disabled GICC entry.
- No need to keep GICR region information for disabled GICC entry.
Observed kernel crash on QDF2400 platform GICC entry is disabled.
Kernel crash traces:
Kernel panic - not syncing: No interrupt controller found.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.5 #26
[<
ffff000008087770>] dump_backtrace+0x0/0x218
[<
ffff0000080879dc>] show_stack+0x14/0x20
[<
ffff00000883b078>] dump_stack+0x98/0xb8
[<
ffff0000080c5c14>] panic+0x118/0x26c
[<
ffff000008b62348>] init_IRQ+0x24/0x2c
[<
ffff000008b609fc>] start_kernel+0x230/0x394
[<
ffff000008b601e4>] __primary_switched+0x64/0x6c
---[ end Kernel panic - not syncing: No interrupt controller found.
Disabled GICC subtable example:
Subtable Type : 0B [Generic Interrupt Controller]
Length : 50
Reserved : 0000
CPU Interface Number :
0000003D
Processor UID :
0000003D
Flags (decoded below) :
00000000
Processor Enabled : 0
Performance Interrupt Trig Mode : 0
Virtual GIC Interrupt Trig Mode : 0
Parking Protocol Version :
00000000
Performance Interrupt :
00000017
Parked Address :
0000000000000000
Base Address :
0000000000000000
Virtual GIC Base Address :
0000000000000000
Hypervisor GIC Base Address :
0000000000000000
Virtual GIC Interrupt :
00000019
Redistributor Base Address :
0000FFFF88F40000
ARM MPIDR :
000000000000000D
Efficiency Class : 00
Reserved : 000000
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaitra P B [Thu, 28 Dec 2017 07:09:11 +0000 (23:09 -0800)]
scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag.
[ Upstream commit
f49d4aed1315a7b766d855f1367142e682b0cc87 ]
1. In IO path, setting of "ATA command pending" flag early before device
removal, invalid device handle etc., checks causes any new commands
to be always returned with SAM_STAT_BUSY and when the driver removes
the drive the SML issues SYNC Cache command and that command is
always returned with SAM_STAT_BUSY and thus making SYNC Cache command
to requeued.
2. If the driver gets an ATA PT command for a SATA drive then the driver
set "ATA command pending" flag in device specific data structure not
to allow any further commands until the ATA PT command is completed.
However, after setting the flag if the driver decides to return the
command back to upper layers without actually issuing to the firmware
(i.e., returns from qcmd failure return paths) then the corresponding
flag is not cleared and this prevents the driver from sending any new
commands to the drive.
This patch fixes above two issues by setting of "ATA command pending"
flag after checking for whether device deleted, invalid device handle,
device busy with task management. And by setting "ATA command pending"
flag to false in all of the qcmd failure return paths after setting the
flag.
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael David Tinoco [Thu, 7 Dec 2017 21:59:13 +0000 (19:59 -0200)]
scsi: libiscsi: Allow sd_shutdown on bad transport
[ Upstream commit
d754941225a7dbc61f6dd2173fa9498049f9a7ee ]
If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.
PID: 1 TASK:
ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
#0 [
ffff8801a69c3a30] __schedule at
ffffffff8183e9ee
#1 [
ffff8801a69c3a80] schedule at
ffffffff8183f0d5
#2 [
ffff8801a69c3a98] schedule_timeout at
ffffffff81842199
#3 [
ffff8801a69c3b40] io_schedule_timeout at
ffffffff8183e604
#4 [
ffff8801a69c3b70] wait_for_completion_io_timeout at
ffffffff8183fc6c
#5 [
ffff8801a69c3bd0] blk_execute_rq at
ffffffff813cfe10
#6 [
ffff8801a69c3c88] scsi_execute at
ffffffff815c3fc7
#7 [
ffff8801a69c3cc8] scsi_execute_req_flags at
ffffffff815c60fe
#8 [
ffff8801a69c3d30] sd_sync_cache at
ffffffff815d37d7
#9 [
ffff8801a69c3da8] sd_shutdown at
ffffffff815d3c3c
This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.
Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.
Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.
After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.
Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Wed, 3 Jan 2018 17:11:14 +0000 (18:11 +0100)]
spi: sh-msiof: Fix timeout failures for TX-only DMA transfers
[ Upstream commit
89434c3c35081439627baa2225622d5bd12242fe ]
When using RX (with or without TX), the DMA interrupt triggers
completion when the RX FIFO has been emptied, i.e. after the full
transfer has finished.
However, when using TX without RX, the DMA interrupt triggers completion
as soon as the DMA engine has filled the TX FIFO, i.e. before the full
transfer has finished. Then sh_msiof_modify_ctr_wait() will spin until
the transfer has really finished and the TFSE bit is cleared, for at
most 1 ms. For slow speeds and/or large transfers, this may cause
timeouts and transfer failures:
spi_sh_msiof
e6e10000.spi: failed to shut down hardware
74x164 spi2.0: SPI transfer failed: -110
spi_master spi2: failed to transfer one message from queue
74x164 spi2.0: Failed writing: -110
Fix this by waiting explicitly until the TX FIFO has been emptied.
Based on a patch in the BSP by Hiromitsu Yamasaki.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 2 Jan 2018 18:53:14 +0000 (19:53 +0100)]
ASoC: Intel: cht_bsw_rt5645: Analog Mic support
[ Upstream commit
b70b309950418437bbd2a30afd169c4f09dee3e5 ]
Various Cherry Trail boards with a rt5645 codec have an analog mic
connected to IN2P + IN2N. The mic on this boards also needs micbias to
be enabled, on some boards micbias1 is used and on others micbias2, so
we enable both.
This commit adds a new "Int Analog Mic" DAPM widget for this, so that we
do not end up enabling micbias on boards with a digital mic which uses
the already present "Int Mic" widget. Some existing UCM files already
refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice,
but these don't work anyways since they enable the RECMIX BST1 Switch
instead of the BST2 switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pardha Saradhi K [Tue, 2 Jan 2018 09:29:57 +0000 (14:59 +0530)]
ASoC: Intel: Skylake: Disable clock gating during firmware and library download
[ Upstream commit
d5cc0a1fcbb5ddbef9fdd4c4a978da3254ddbf37 ]
During firmware and library download, sometimes it is observed that
firmware and library download is timed-out resulting into probe failure.
This patch disables dynamic clock gating while firmware and library
download.
Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Thu, 28 Dec 2017 14:16:47 +0000 (09:16 -0500)]
media: videobuf2-core: don't go out of the buffer range
[ Upstream commit
df93dc61b0d8b19a5c9db545cf3fcc24f88dfde4 ]
Currently, there's no check if an invalid buffer range
is passed. However, while testing DVB memory mapped apps,
I got this:
videobuf2_core: VB: num_buffers -
2143943680, buffer 33, index -
2143943647
unable to handle kernel paging request at
ffff888b773c0890
IP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core]
PGD
4142c7067 P4D
4142c7067 PUD 0
Oops: 0002 [#1] SMP
Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc rc_dvbsky sp2 ts2020 intel_rapl x86_pkg_temp_thermal dvb_usb_dvbsky intel_powerclamp dvb_usb_v2 coretemp m88ds3103 kvm_intel i2c_mux dvb_core snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul videobuf2_vmalloc videobuf2_memops snd_hda_intel ghash_clmulni_intel videobuf2_core snd_hda_codec rc_core mei_me intel_cstate snd_hwdep snd_hda_core videodev intel_uncore snd_pcm mei media tpm_tis tpm_tis_core intel_rapl_perf tpm snd_timer lpc_ich snd soundcore kvm irqbypass libcrc32c i915 i2c_algo_bit drm_kms_helper
e1000e ptp drm crc32c_intel video pps_core
CPU: 3 PID: 1776 Comm: dvbv5-zap Not tainted 4.14.0+ #78
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
task:
ffff88877c73bc80 task.stack:
ffffb7c402418000
RIP: 0010:__vb2_queue_alloc+0x134/0x4e0 [videobuf2_core]
RSP: 0018:
ffffb7c40241bc60 EFLAGS:
00010246
RAX:
0000000080360421 RBX:
0000000000000021 RCX:
000000000000000a
RDX:
ffffb7c40241bcf4 RSI:
ffff888780362c60 RDI:
ffff888796d8e130
RBP:
ffffb7c40241bcc8 R08:
0000000000000316 R09:
0000000000000004
R10:
ffff888780362c00 R11:
0000000000000001 R12:
000000000002f000
R13:
ffff8887758be700 R14:
0000000000021000 R15:
0000000000000001
FS:
00007f2849024740(0000) GS:
ffff888796d80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff888b773c0890 CR3:
000000043beb2005 CR4:
00000000003606e0
Call Trace:
vb2_core_reqbufs+0x226/0x420 [videobuf2_core]
dvb_vb2_reqbufs+0x2d/0xc0 [dvb_core]
dvb_dvr_do_ioctl+0x98/0x1d0 [dvb_core]
dvb_usercopy+0x53/0x1b0 [dvb_core]
? dvb_demux_ioctl+0x20/0x20 [dvb_core]
? tty_ldisc_deref+0x16/0x20
? tty_write+0x1f9/0x310
? process_echoes+0x70/0x70
dvb_dvr_ioctl+0x15/0x20 [dvb_core]
do_vfs_ioctl+0xa5/0x600
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1a/0xa5
RIP: 0033:0x7f28486f7ea7
RSP: 002b:
00007ffc13b2db18 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
000055b10fc06130 RCX:
00007f28486f7ea7
RDX:
00007ffc13b2db48 RSI:
00000000c0086f3c RDI:
0000000000000007
RBP:
0000000000000203 R08:
000055b10df1e02c R09:
000000000000002e
R10:
0036b42415108357 R11:
0000000000000246 R12:
0000000000000000
R13:
00007f2849062f60 R14:
00000000000001f1 R15:
00007ffc13b2da54
Code: 74 0a 60 8b 0a 48 83 c0 30 48 83 c2 04 89 48 d0 89 48 d4 48 39 f0 75 eb 41 8b 42 08 83 7d d4 01 41 c7 82 ec 01 00 00 ff ff ff ff <4d> 89 94 c5 88 00 00 00 74 14 83 c3 01 41 39 dc 0f 85 f1 fe ff
RIP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP:
ffffb7c40241bc60
CR2:
ffff888b773c0890
So, add a sanity check in order to prevent going past array.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jernej Škrabec [Sat, 30 Dec 2017 21:01:54 +0000 (22:01 +0100)]
clk: sunxi-ng: a83t: Add M divider to TCON1 clock
[ Upstream commit
7dbc7f5f4904cfddc199af171ea095490a434f15 ]
TCON1 also has M divider, contrary to TCON0. And the mux is only
2 bits wide, instead of 3.
Fixes:
05359be1176b ("clk: sunxi-ng: Add driver for A83T CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[wens@csie.org: Add description about mux width difference]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej Purski [Wed, 22 Nov 2017 15:32:15 +0000 (16:32 +0100)]
hwmon: (ina2xx) Make calibration register value fixed
[ Upstream commit
5d389b125186cf254ad5b8015763ac07c151aea4 ]
Calibration register is used for calculating current register in
hardware according to datasheet:
current = shunt_volt * calib_register / 2048 (ina 226)
current = shunt_volt * calib_register / 4096 (ina 219)
Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in
order to avoid truncation error and provide best precision allowed
by shunt_voltage measurement. Make current scale value follow changes
of shunt_resistor from sysfs as calib_register value is now fixed.
Power_lsb value should also follow shunt_resistor changes as stated in
datasheet:
power_lsb = 25 * current_lsb (ina 226)
power_lsb = 20 * current_lsb (ina 219)
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Mon, 1 Jan 2018 11:07:17 +0000 (13:07 +0200)]
RDMA/cma: Mark end of CMA ID messages
[ Upstream commit
e48e5e198fb6ec77c91047a694022f0fefa45292 ]
The commit
1a1c116f3dcf ("RDMA/netlink: Simplify the put_msg and put_attr")
removes nlmsg_len calculation in ibnl_put_attr causing netlink messages and
caused to miss source and destination addresses.
Fixes:
1a1c116f3dcf ("RDMA/netlink: Simplify the put_msg and put_attr")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sowmini Varadhan [Mon, 25 Dec 2017 22:43:04 +0000 (14:43 -0800)]
selftests/net: fix bugs in address and port initialization
[ Upstream commit
d36f45e5b46723cf2d4147173e18c52d4143176d ]
Address/port initialization should work correctly regardless
of the order in which command line arguments are supplied,
E.g, cfg_port should be used to connect to the remote host
even if it is processed after -D, src/dst address initialization
should not require that [-4|-6] be specified before
the -S or -D args, receiver should be able to bind to *.<cfg_port>
Achieve this by making sure that the address/port structures
are initialized after all command line options are parsed.
Store cfg_port in host-byte order, and use htons()
to set up the sin_port/sin6_port before bind/connect,
so that the network system calls get the correct values
in network-byte order.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Wed, 6 Dec 2017 20:20:15 +0000 (14:20 -0600)]
PM / devfreq: Fix potential NULL pointer dereference in governor_store
[ Upstream commit
63f1e05f7fe9ca509c60154d6a833abf96eecdc9 ]
df->governor is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.
Notice that df->governor is being null checked at line 1004:
if (df->governor) {, which implies it might be null.
Fix this by null checking df->governor before dereferencing it.
Addresses-Coverity-ID: 1401988 ("Dereference before null check")
Fixes:
bcf23c79c4e4 ("PM / devfreq: Fix available_governor sysfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jerome Brunet [Thu, 21 Dec 2017 16:30:54 +0000 (17:30 +0100)]
clk: divider: fix incorrect usage of container_of
[ Upstream commit
12a26c298d2a8b1cab498533fa65198e49e3afd3 ]
divider_recalc_rate() is an helper function used by clock divider of
different types, so the structure containing the 'hw' pointer is not
always a 'struct clk_divider'
At the following line:
> div = _get_div(table, val, flags, divider->width);
in several cases, the value of 'divider->width' is garbage as the actual
structure behind this memory is not a 'struct clk_divider'
Fortunately, this width value is used by _get_val() only when
CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so
far when the structure is not a 'struct clk_divider'. This is probably
why we did not notice this bug before
Fixes:
afe76c8fd030 ("clk: allow a clk divider with max divisor when zero")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleksij Rempel [Tue, 26 Sep 2017 06:11:22 +0000 (08:11 +0200)]
watchdog: dw_wdt: add stop watchdog operation
[ Upstream commit
1bfe8889380890efe4943d125124f5a7b48571b0 ]
The only way of stopping the watchdog is by resetting it.
Add the watchdog op for stopping the device and reset if
a reset line is provided.
At same time WDOG_HW_RUNNING should be remove from dw_wdt_start.
As commented by Guenter Roeck:
dw_wdt sets WDOG_HW_RUNNING in its open function. Result is
that the kref_get() in watchdog_open() won't be executed. But then
kref_put() in close will be called since the watchdog now does stop.
This causes the imbalance.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Fri, 10 Nov 2017 04:45:41 +0000 (15:45 +1100)]
VFS: close race between getcwd() and d_move()
[ Upstream commit
61647823aa920e395afcce4b57c32afb51456cab ]
d_move() will call __d_drop() and then __d_rehash()
on the dentry being moved. This creates a small window
when the dentry appears to be unhashed. Many tests
of d_unhashed() are made under ->d_lock and so are safe
from racing with this window, but some aren't.
In particular, getcwd() calls d_unlinked() (which calls
d_unhashed()) without d_lock protection, so it can race.
This races has been seen in practice with lustre, which uses d_move() as
part of name lookup. See:
https://jira.hpdd.intel.com/browse/LU-9735
It could race with a regular rename(), and result in ENOENT instead
of either the 'before' or 'after' name.
The race can be demonstrated with a simple program which
has two threads, one renaming a directory back and forth
while another calls getcwd() within that directory: it should never
fail, but does. See:
https://patchwork.kernel.org/patch/9455345/
We could fix this race by taking d_lock and rechecking when
d_unhashed() reports true. Alternately when can remove the window,
which is the approach this patch takes.
___d_drop() is introduce which does *not* clear d_hash.pprev
so the dentry still appears to be hashed. __d_drop() calls
___d_drop(), then clears d_hash.pprev.
__d_move() now uses ___d_drop() and only clears d_hash.pprev
when not rehashing.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moni Shoua [Thu, 28 Dec 2017 14:26:11 +0000 (16:26 +0200)]
net/mlx4_en: Change default QoS settings
[ Upstream commit
a42b63c1ac1986f17f71bc91a6b0aaa14d4dae71 ]
Change the default mapping between TC and TCG as follows:
Prio | TC/TCG
| from to
| (set by FW) (set by SW)
---------+-----------------------------------
0 | 0/0 0/7
1 | 1/0 0/6
2 | 2/0 0/5
3 | 3/0 0/4
4 | 4/0 0/3
5 | 5/0 0/2
6 | 6/0 0/1
7 | 7/0 0/0
These new settings cause that a pause frame for any prio stops
traffic for all prios.
Fixes:
564c274c3df0 ("net/mlx4_en: DCB QoS support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sat, 23 Dec 2017 18:41:47 +0000 (19:41 +0100)]
ACPI / video: Default lcd_only to true on Win8-ready and newer machines
[ Upstream commit
5928c281524fe451114e04f1dfa11246a37e859f ]
We're seeing a lot of bogus backlight interfaces on newer machines without
a LCD such as desktops, servers and HDMI sticks. This causes userspace to
show a non-functional brightness slider in e.g. the GNOME3 system menu,
which is undesirable. And, in general, we should simply just not register
a non functional backlight interface.
Checking the LCD flag causes the bogus acpi_video backlight interfaces to
go away (on the machines this was tested on).
This change sets the lcd_only option by default on any machines which
are Win8-ready, to fix this.
This is not entirely without a risk of regressions, but video_detect.c
already prefers native-backlight interfaces over the acpi_video one
on Win8-ready machines, calling acpi_video_unregister_backlight() as soon
as a native interface shows up. This is done because the ACPI backlight
interface often is broken on Win8-ready machines, because win8 does not
seem to actually use it.
So in practice we already end up not registering the ACPI backlight
interface on (most) Win8-ready machines with a LCD panel, thus this
change does not change anything for (most) machines with a LCD panel
and on machines without a LCD panel we actually don't want to register
any backlight interfaces.
This has been tested on the following machines and fixes a bogus backlight
interface showing up there:
- Desktop with an Asrock B150M Pro4S/D3 m.b. using i5-6500 builtin gfx
- Intel Compute Stick STK1AW32SC
- Meegopad T08 HDMI stick
Bogus backlight interfaces have also been reported on:
- Desktop with Asus H87I-Plus m.b.
- Desktop with ASRock B75M-ITX m.b.
- Desktop with Gigabyte Z87-D3HP m.b.
- Dell PowerEdge T20 desktop
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133327
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133329
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133646
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sowmini Varadhan [Fri, 22 Dec 2017 17:38:59 +0000 (09:38 -0800)]
rds; Reset rs->rs_bound_addr in rds_add_bound() failure path
[ Upstream commit
7ae0c649c47f1c5d2db8cee6dd75855970af1669 ]
If the rds_sock is not added to the bind_hash_table, we must
reset rs_bound_addr so that rds_remove_bound will not trip on
this rds_sock.
rds_add_bound() does a rds_sock_put() in this failure path, so
failing to reset rs_bound_addr will result in a socket refcount
bug, and will trigger a WARN_ON with the stack shown below when
the application subsequently tries to close the PF_RDS socket.
WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \
rds_sock_destruct+0x15/0x30 [rds]
:
__sk_destruct+0x21/0x190
rds_remove_bound.part.13+0xb6/0x140 [rds]
rds_release+0x71/0x120 [rds]
sock_release+0x1a/0x70
sock_close+0xe/0x20
__fput+0xd5/0x210
task_work_run+0x82/0xa0
do_exit+0x2ce/0xb30
? syscall_trace_enter+0x1cc/0x2b0
do_group_exit+0x39/0xa0
SyS_exit_group+0x10/0x10
do_syscall_64+0x61/0x1a0
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Fri, 22 Dec 2017 14:10:17 +0000 (15:10 +0100)]
l2tp: fix missing print session offset info
[ Upstream commit
820da5357572715c6235ba3b3daa2d5b43a1198f ]
Report offset parameter in L2TP_CMD_SESSION_GET command if
it has been configured by userspace
Fixes:
309795f4bec ("l2tp: Add netlink control API for L2TP")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fuyun Liang [Fri, 22 Dec 2017 04:21:50 +0000 (12:21 +0800)]
net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg
[ Upstream commit
27b5bf49f0924fd62d2b1ef8467b40773973da34 ]
When phy exists, we use the value of phydev.autoneg to represent the
auto-negotiation state of hardware. Otherwise, we use the value of
mac.autoneg to represent it.
This patch fixes for getting a error value of auto-negotiation state in
hclge_get_autoneg().
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Li [Fri, 22 Dec 2017 04:21:43 +0000 (12:21 +0800)]
net: hns3: free the ring_data structrue when change tqps
[ Upstream commit
99fdf6b1cadf41bb253408589788f025027274f3 ]
This patch fixes a memory leak problems in change tqps process,
the function hns3_uninit_all_ring and hns3_init_all_ring
may be called many times.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Mingguang Qu <qumingguang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mengting Zhang [Wed, 13 Dec 2017 07:01:53 +0000 (15:01 +0800)]
perf evsel: Enable ignore_missing_thread for pid option
[ Upstream commit
ca8000684ec4e66f965e1f9547a3c6cb834154ca ]
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
Here, the patch enables perf_evsel::ignore_missing_thread for -p option
to ignore complete failure if any of threads die before we open the event.
But it may still return sys_perf_event_open failure with 22(Invalid) if we
monitors several event groups.
sys_perf_event_open: pid 28960 cpu 40 group_fd 118202 flags 0x8
sys_perf_event_open: pid 28961 cpu 40 group_fd 118203 flags 0x8
WARNING: Ignored open failure for pid 28962
sys_perf_event_open: pid 28962 cpu 40 group_fd [118203] flags 0x8
sys_perf_event_open failed, error -22
That is because when we ignore a missing thread, we change the thread_idx
without dealing with its fds, FD(evsel, cpu, thread). Then get_group_fd()
may return a wrong group_fd for the next thread and sys_perf_event_open()
return with 22.
sys_perf_event_open(){
...
if (group_fd != -1)
perf_fget_light()//to get corresponding group_leader by group_fd
...
if (group_leader)
if (group_leader->ctx->task != ctx->task)//should on the same task
goto err_context
...
}
This patch also fixes this bug by introducing perf_evsel__remove_fd() and
update_fds to allow removing fds for the missing thread.
Changes since v1:
- Change group_fd__remove() into a more genetic way without changing code logic
- Remove redundant condition
Changes since v2:
- Use a proper function name and add some comment.
- Multiline comment style fixes.
Committer testing:
Before this patch the recently added 'perf stat --per-thread' for system
wide counting would race while enumerating all threads using /proc:
[root@jouet ~]# perf stat --per-thread
failed to parse CPUs map: No such file or directory
Usage: perf stat [<options>] [<command>]
-C, --cpu <cpu> list of cpus to monitor in system-wide
-a, --all-cpus system-wide collection from all CPUs
[root@jouet ~]# perf stat --per-thread
failed to parse CPUs map: No such file or directory
Usage: perf stat [<options>] [<command>]
-C, --cpu <cpu> list of cpus to monitor in system-wide
-a, --all-cpus system-wide collection from all CPUs
[root@jouet ~]#
When, say, the kernel was being built, so lots of shortlived threads,
after this patch this doesn't happen.
Signed-off-by: Mengting Zhang <zhangmengting@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Cheng Jian <cj.chengjian@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1513148513-6974-1-git-send-email-zhangmengting@huawei.com
[ Remove one use 'evlist' alias variable ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Fri, 8 Dec 2017 16:26:46 +0000 (01:26 +0900)]
perf probe: Add warning message if there is unexpected event name
[ Upstream commit
9f5c6d8777a2d962b0eeacb2a16f37da6bea545b ]
This improve the error message so that user can know event-name error
before writing new events to kprobe-events interface.
E.g.
======
#./perf probe -x /lib64/libc-2.25.so malloc_get_state*
Internal error: "malloc_get_state@GLIBC_2" is an invalid event name.
Error: Failed to add events.
======
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275040665.24652.5188568529237584489.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Fri, 8 Dec 2017 16:28:12 +0000 (01:28 +0900)]
perf probe: Find versioned symbols from map
[ Upstream commit
4b3a2716dd785fabb9f6ac80c1d53cb29a88169d ]
Commit
d80406453ad4 ("perf symbols: Allow user probes on versioned
symbols") allows user to find default versioned symbols (with "@@") in
map. However, it did not enable normal versioned symbol (with "@") for
perf-probe. E.g.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state
Failed to find symbol malloc_get_state in /usr/lib64/libc-2.25.so
Error: Failed to add events.
=====
This solves above issue by improving perf-probe symbol search function,
as below.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state
Added new event:
probe_libc:malloc_get_state (on malloc_get_state in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_get_state -aR sleep 1
# ./perf probe -l
probe_libc:malloc_get_state (on malloc_get_state@GLIBC_2.2.5 in /usr/lib64/libc-2.25.so)
=====
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: bhargavb <bhargavaramudu@gmail.com>
Cc: linux-rt-users@vger.kernel.org
Link: http://lkml.kernel.org/r/151275049269.24652.1639103455496216255.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yi Zeng [Tue, 26 Dec 2017 11:22:26 +0000 (19:22 +0800)]
thermal: power_allocator: fix one race condition issue for thermal_instances list
[ Upstream commit
a5de11d67dcd268b8d0beb73dc374de5e97f0caf ]
When invoking allow_maximum_power and traverse tz->thermal_instances,
we should grab thermal_zone_device->lock to avoid race condition. For
example, during the system reboot, if the mali GPU device implements
device shutdown callback and unregister GPU devfreq cooling device,
the deleted list head may be accessed to cause panic, as the following
log shows:
[ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address
dead000000000070
[ 33.566708] c3 25 (kworker/3:0) pgd =
ffffffc0ed290000
[ 33.572071] c3 25 (kworker/3:0) [
dead000000000070] *pgd=
00000001ed292003, *pud=
00000001ed292003, *pmd=
0000000000000000
[ 33.581515] c3 25 (kworker/3:0) Internal error: Oops:
96000004 [#1] PREEMPT SMP
[ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912
[ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check
[ 33.620245] c3 25 (kworker/3:0) task:
ffffffc0f32e4200 ti:
ffffffc0f32f0000 task.ti:
ffffffc0f32f0000
[ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4
[ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4
[ 33.643742] c3 25 (kworker/3:0) pc : [<
ffffff8008683dd0>] lr : [<
ffffff8008683e10>] pstate:
20000145
[ 33.652874] c3 25 (kworker/3:0) sp :
ffffffc0f32f3bb0
[ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020)
[ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000)
[ 34.819822] c3 25 (kworker/3:0) Call trace:
[ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0)
[ 34.924993] c3 25 (kworker/3:0) [<
ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4
[ 34.933184] c3 25 (kworker/3:0) [<
ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224
[ 34.941545] c3 25 (kworker/3:0) [<
ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c
[ 34.949818] c3 25 (kworker/3:0) [<
ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c
[ 34.957924] c3 25 (kworker/3:0) [<
ffffff80080b93a4>] process_one_work+0x168/0x458
[ 34.965414] c3 25 (kworker/3:0) [<
ffffff80080ba068>] worker_thread+0x13c/0x4b4
[ 34.972650] c3 25 (kworker/3:0) [<
ffffff80080c0a4c>] kthread+0xe8/0xfc
[ 34.979187] c3 25 (kworker/3:0) [<
ffffff8008084e90>] ret_from_fork+0x10/0x40
[ 34.986244] c3 25 (kworker/3:0) Code:
f9405e73 eb1302bf d102e273 54ffc460 (
b9402a61)
[ 34.994339] c3 25 (kworker/3:0) ---[ end trace
32057901e3b7e1db ]---
Signed-off-by: Yi Zeng <yizeng@asrmicro.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Brunner [Thu, 21 Dec 2017 16:32:24 +0000 (17:32 +0100)]
ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT
[ Upstream commit
09ee9dba9611cd382fd360a99ad1c2fa23bfdca8 ]
If SNAT modifies the source address the resulting packet might match
an IPsec policy, reinject the packet if that's the case.
The exact same thing is already done for IPv4.
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioan Moldovan [Mon, 28 Aug 2017 15:09:39 +0000 (18:09 +0300)]
Bluetooth: Add a new 04ca:3015 QCA_ROME device
[ Upstream commit
0a03f98b98c201191e3ba15a0e33f46d8660e1fd ]
This patch adds the 04ca:3015 (from a QCA9377 board) Bluetooth device
to the btusb blacklist and makes the kernel use the btqca module
instead of btusb. The patch is necessary because, without it the
04ca:3015 device defaults to using the btusb driver, which makes the
WIFI side of the QCA9377 board unusable (obtains 0 MBps in speedtest,
when the 04ca:3015 bluetooth is used with an audio headset).
/sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3015 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Ioan Moldovan <ioan.moldovan1999@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rasmus Villemoes [Thu, 16 Nov 2017 12:15:26 +0000 (13:15 +0100)]
ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node
[ Upstream commit
d5c7b4d5ac2237a6da7ced3adfe6b8bf769f8cc6 ]
Commit
a22950c888e3 (mmc: sdhci-of-esdhc: add quirk
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to
enable the broken timeout val quirk for ls1021a, but did not add the
corresponding compatible string to the device tree, so it didn't really
have any effect. Fix that.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Sat, 23 Dec 2017 21:38:32 +0000 (22:38 +0100)]
clk: meson: mpll: use 64-bit maths in params_from_rate
[ Upstream commit
86aacdca66774051cbc0958110a48074b57a060b ]
"rem * SDM_DEN" can easily overflow on the 32-bit Meson8 and Meson8b
SoCs if the "remainder" (after the division operation) is greater than
262143Hz. This is likely to happen since the input clock for the MPLLs
on Meson8 and Meson8b is "fixed_pll", which is running at a rate of
2550MHz.
One example where this was observed to be problematic was the Ethernet
clock calculation (which takes MPLL2 as input). When requesting a rate
of 125MHz there is a remainder of 2500000Hz.
The resulting MPLL2 rate before this patch was 127488329Hz.
The resulting MPLL2 rate after this patch is 124999103Hz.
Commit
b609338b26f5 ("clk: meson: mpll: use 64bit math in
rate_from_params") already fixed a similar issue in rate_from_params.
Fixes:
007e6e5c5f01d3 ("clk: meson: mpll: add rw operation")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tatyana Nikolova [Fri, 22 Dec 2017 15:47:01 +0000 (09:47 -0600)]
i40iw: Validate correct IRD/ORD connection parameters
[ Upstream commit
ce9ce74145aa6814a370a9ff4f5a1d719baaced1 ]
Casting to u16 before validating IRD/ORD connection
parameters could cause recording wrong IRD/ORD values
in the cm_node. Validate the IRD/ORD parameters as
they are passed by the application before recording
them.
Fixes:
f27b4746f378 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiraz Saleem [Fri, 22 Dec 2017 15:46:56 +0000 (09:46 -0600)]
i40iw: Correct Q1/XF object count equation
[ Upstream commit
fe99afd1febd74e0ef1fed7e3283f09effe1f4f0 ]
Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2
as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF)
object count to power of 2 to satisfy hardware requirement.
Fixes:
86dbcd0f12e9 ("i40iw: add file to handle cqp calls")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiraz Saleem [Fri, 22 Dec 2017 15:46:59 +0000 (09:46 -0600)]
i40iw: Fix sequence number for the first partial FPDU
[ Upstream commit
df8b13a1b23356d01dfc4647a5629cdb0f4ce566 ]
Partial FPDU processing is broken as the sequence number
for the first partial FPDU is wrong due to incorrect
Q2 buffer offset. The offset should be 64 rather than 16.
Fixes:
786c6adb3a94 ("i40iw: add puda code")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 8 Apr 2018 12:26:34 +0000 (14:26 +0200)]
Linux 4.14.33
Greg Kroah-Hartman [Fri, 6 Apr 2018 07:45:56 +0000 (09:45 +0200)]
Revert "ip6_vti: adjust vti mtu according to mtu of lower device"
This reverts commit
e6cfc525163ea3375113a9dcc234c2cdd8dbf643 which is
commit
53c81e95df1793933f87748d36070a721f6cb287 upstream.
Ben writes that there are a number of follow-on patches needed to fix
this up, but they get complex to backport, and some custom fixes are
needed, so let's just revert this and wait for a "real" set of patches
to resolve this to be submitted if it is really needed.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Petr Vorel <pvorel@suse.cz>
Cc: Alexey Kodanev <alexey.kodanev@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 6 Apr 2018 07:06:23 +0000 (09:06 +0200)]
Revert "cpufreq: Fix governor module removal race"
This reverts commit
0049457bfde661cf47410eaacad65845c9a2bb45 which was
commit
a8b149d32b663c1a4105273295184b78f53d33cf upstream.
The backport was not correct, so just drop it entirely.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 6 Apr 2018 06:56:07 +0000 (08:56 +0200)]
Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"
This reverts commit
2f1f60c4b903f0f5464560783655ff74c9663a92 which was
commit
7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream.
It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 6 Apr 2018 06:48:11 +0000 (08:48 +0200)]
Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"
This reverts commit
0ed43f944a4070d04eddacded8629d0ddb9c8003 which was
comit
e153db03c6b7a035c797bcdf35262586f003ee93 upstream.
It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Wed, 21 Mar 2018 16:49:29 +0000 (12:49 -0400)]
Fix slab name "biovec-(1<<(21-12))"
commit
bd5c4facf59648581d2f1692dad7b107bf429954 upstream.
I'm getting a slab named "biovec-(1<<(21-12))". It is caused by unintended
expansion of the macro BIO_MAX_PAGES. This patch renames it to biovec-max.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Brugger [Thu, 15 Mar 2018 16:54:20 +0000 (17:54 +0100)]
net: hns: Fix ethtool private flags
commit
d61d263c8d82db7c4404a29ebc29674b1c0c05c9 upstream.
The driver implementation returns support for private flags, while
no private flags are present. When asked for the number of private
flags it returns the number of statistic flag names.
Fix this by returning EOPNOTSUPP for not implemented ethtool flags.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keerthy [Tue, 24 Oct 2017 08:44:08 +0000 (14:14 +0530)]
ARM: dts: DRA76-EVM: Set powerhold property for tps65917
commit
aac4619d028e2c444ac1217fc2d05b0322079dff upstream.
Set powerhold property for tps65917
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Frysinger [Mon, 29 Jan 2018 22:08:21 +0000 (17:08 -0500)]
vt: change SGR 21 to follow the standards
commit
65d9982d7e523a1a8e7c9af012da0d166f72fc56 upstream.
ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined"
since at least March 1984. The Linux kernel has treated it as SGR 22
"normal intensity" since it was added in Linux-0.96b in June 1992.
Before that, it was simply ignored. Other terminal emulators have
either ignored it, or treat it as double underline now. xterm for
example added support in its 304 release (May 2014) [2] where it was
previously ignoring it.
Changing this behavior shouldn't be an issue:
- It isn't a named capability in ncurses's terminfo database, so no
script is using libtinfo/libcurses to look this up, or using tput
to query & output the right sequence.
- Any script assuming SGR 21 will reset intensity in all terminals
already do not work correctly on non-Linux VTs (including running
under screen/tmux/etc...).
- If someone has written a script that only runs in the Linux VT, and
they're using SGR 21 (instead of SGR 22), the output should still
be readable.
imo it's important to change this as the Linux VT's non-conformance
is sometimes used as an argument for other terminal emulators to not
implement SGR 21 at all, or do so incorrectly.
[1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm
[2]: https://github.com/ThomasDickey/xterm-snapshots/commit/
2fd29cb98d214cb536bcafbee00bc73b3f1eeb9d
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Zary [Tue, 3 Apr 2018 17:24:34 +0000 (10:24 -0700)]
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
commit
04bb1719c4de94700056241d4c0fe3c1413f5aff upstream.
The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g.
VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all
VAIO machines by the nomux blacklist, the data from touch sensor
buttons and touchpad are combined. The protocol used by the buttons is
probably similar to the touchpad protocol (both are Synaptics) so both
devices get enabled. The controller combines the data, creating a mess
which results in random button clicks, touchpad stopping working and
lost sync error messages:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
Add a new i8042_dmi_forcemux_table whitelist with VGN-CS.
With MUX enabled, touch sensor buttons are detected as separate device
(and left disabled as there's currently no driver), fixing all touchpad
problems.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dennis Wassenberg [Thu, 8 Mar 2018 23:32:09 +0000 (15:32 -0800)]
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
commit
b56af54ac78c54a519d82813836f305d7f76ef27 upstream.
Reset i8042 before probing because of insufficient BIOS initialisation of
the i8042 serial controller. This makes Synaptics touchpad detection
possible. Without resetting the Synaptics touchpad is not detected because
there are always NACK messages from AUX port.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masaki Ota [Mon, 29 Jan 2018 22:36:54 +0000 (14:36 -0800)]
Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
commit
567b9b549cfa1cbc202762ae97b5385c29ade1e3 upstream.
The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.
The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.
The same issue exists on Dell Latitude 7370.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929
Fixes:
646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads")
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Tested-by: Jaak Ristioja <jaak@ristioja.ee>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gaku Inami [Tue, 13 Feb 2018 02:06:40 +0000 (11:06 +0900)]
Revert "base: arch_topology: fix section mismatch build warnings"
commit
9de9a449482677a75f1edd2049268a7efc40fc96 upstream.
This reverts commit
452562abb5b7 ("base: arch_topology: fix section
mismatch build warnings"). It causes the notifier call hangs in some
use-cases.
In some cases with using maxcpus, some of cpus are booted first and
then the remaining cpus are booted. As an example, some users who want
to realize fast boot up often use the following procedure.
1) Define all CPUs on device tree (CA57x4 + CA53x4)
2) Add "maxcpus=4" in bootargs
3) Kernel boot up with CA57x4
4) After kernel boot up, CA53x4 is booted from user
When kernel init was finished, CPUFREQ_POLICY_NOTIFIER was not still
unregisterd. This means that "__init init_cpu_capacity_callback()"
will be called after kernel init sequence. To avoid this problem,
it needs to remove __init{,data} annotations by reverting this commit.
Also, this commit was needed to fix kernel compile issue below.
However, this issue was also fixed by another patch: commit
82d8ba717ccb
("arch_topology: Fix section miss match warning due to
free_raw_capacity()") in v4.15 as well.
Whereas commit
452562abb5b7 added all the missing __init annotations,
commit
82d8ba717ccb removed it from free_raw_capacity().
WARNING: vmlinux.o(.text+0x548f24): Section mismatch in reference
from the function init_cpu_capacity_callback() to the variable
.init.text:$x
The function init_cpu_capacity_callback() references
the variable __init $x.
This is often because init_cpu_capacity_callback lacks a __init
annotation or the annotation of $x is wrong.
Fixes:
82d8ba717ccb ("arch_topology: Fix section miss match warning due to free_raw_capacity()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Gaku Inami <gaku.inami.xh@renesas.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Mori Hess [Thu, 15 Mar 2018 10:25:44 +0000 (10:25 +0000)]
staging: comedi: ni_mio_common: ack ai fifo error interrupts.
commit
e1d9fc04c41840a4688ef6ce90b6dcca157ea4d7 upstream.
Ack ai fifo error interrupts in interrupt handler to clear interrupt
after fifo overflow. It should prevent lock-ups after the ai fifo
overflows.
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Bo [Thu, 1 Feb 2018 00:09:13 +0000 (17:09 -0700)]
Btrfs: fix unexpected cow in run_delalloc_nocow
commit
5811375325420052fcadd944792a416a43072b7f upstream.
Fstests generic/475 provides a way to fail metadata reads while
checking if checksum exists for the inode inside run_delalloc_nocow(),
and csum_exist_in_range() interprets error (-EIO) as inode having
checksum and makes its caller enter the cow path.
In case of free space inode, this ends up with a warning in
cow_file_range().
The same problem applies to btrfs_cross_ref_exist() since it may also
read metadata in between.
With this, run_delalloc_nocow() bails out when errors occur at the two
places.
cc: <stable@vger.kernel.org> v2.6.28+
Fixes:
17d217fe970d ("Btrfs: fix nodatasum handling in balancing code")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Tue, 20 Feb 2018 07:48:12 +0000 (23:48 -0800)]
crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one
commit
8f461b1e02ed546fbd0f11611138da67fd85a30f upstream.
With ecb-cast5-avx, if a 128+ byte scatterlist element followed a
shorter one, then the algorithm accidentally encrypted/decrypted only 8
bytes instead of the expected 128 bytes. Fix it by setting the
encryption/decryption 'fn' correctly.
Fixes:
c12ab20b162c ("crypto: cast5/avx - avoid using temporary stack buffers")
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leonard Crestez [Tue, 13 Mar 2018 20:17:23 +0000 (22:17 +0200)]
crypto: arm,arm64 - Fix random regeneration of S_shipped
commit
6aaf49b495b446ff6eec0ac983f781ca0dc56a73 upstream.
The decision to rebuild .S_shipped is made based on the relative
timestamps of .S_shipped and .pl files but git makes this essentially
random. This means that the perl script might run anyway (usually at
most once per checkout), defeating the whole purpose of _shipped.
Fix by skipping the rule unless explicit make variables are provided:
REGENERATE_ARM_CRYPTO or REGENERATE_ARM64_CRYPTO.
This can produce nasty occasional build failures downstream, for example
for toolchains with broken perl. The solution is minimally intrusive to
make it easier to push into stable.
Another report on a similar issue here: https://lkml.org/lkml/2018/3/8/1379
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej S. Szmigiero [Sat, 24 Feb 2018 16:03:21 +0000 (17:03 +0100)]
crypto: ccp - return an actual key size from RSA max_size callback
commit
0a9eb80e643064266868bd2fb2cd608e669309b0 upstream.
rsa-pkcs1pad uses a value returned from a RSA implementation max_size
callback as a size of an input buffer passed to the RSA implementation for
encrypt and sign operations.
CCP RSA implementation uses a hardware input buffer which size depends only
on the current RSA key length, so it should return this key length in
the max_size callback, too.
This also matches what the kernel software RSA implementation does.
Previously, the value returned from this callback was always the maximum
RSA key size the CCP hardware supports.
This resulted in this huge buffer being passed by rsa-pkcs1pad to CCP even
for smaller key sizes and then in a buffer overflow when ccp_run_rsa_cmd()
tried to copy this large input buffer into a RSA key length-sized hardware
input buffer.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes:
ceeec0afd684 ("crypto: ccp - Add support for RSA on the CCP")
Cc: stable@vger.kernel.org
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rui Miguel Silva [Thu, 22 Feb 2018 14:22:47 +0000 (14:22 +0000)]
crypto: caam - Fix null dereference at error path
commit
b85149f6f5d5a9279f29a73b2e95342f4d465e73 upstream.
caam_remove already removes the debugfs entry, so we need to remove the one
immediately before calling caam_remove.
This fix a NULL dereference at error paths is caam_probe fail.
Fixes:
67c2315def06 ("crypto: caam - add Queue Interface (QI) backend support")
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Cc: <stable@vger.kernel.org> # 4.12+
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Mon, 26 Mar 2018 00:53:25 +0000 (08:53 +0800)]
crypto: ahash - Fix early termination in hash walk
commit
900a081f6912a8985dc15380ec912752cb66025a upstream.
When we have an unaligned SG list entry where there is no leftover
aligned data, the hash walk code will incorrectly return zero as if
the entire SG list has been processed.
This patch fixes it by moving onto the next page instead.
Reported-by: Eli Cooper <elicooper@gmx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conor McLoughlin [Tue, 13 Feb 2018 08:29:56 +0000 (08:29 +0000)]
crypto: testmgr - Fix incorrect values in PKCS#1 test vector
commit
333e18c5cc74438f8940c7f3a8b3573748a371f9 upstream.
The RSA private key for the first form should have
version, prime1, prime2, exponent1, exponent2, coefficient
values 0.
With non-zero values for prime1,2, exponent 1,2 and coefficient
the Intel QAT driver will assume that values are provided for the
private key second form. This will result in signature verification
failures for modules where QAT device is present and the modules
are signed with rsa,sha256.
Cc: <stable@vger.kernel.org>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregory CLEMENT [Tue, 13 Mar 2018 16:48:40 +0000 (17:48 +0100)]
crypto: inside-secure - fix clock management
commit
f962eb46e7a9b98a58d2483f5eb216e738fec732 upstream.
In this driver the clock is got but never put when the driver is removed
or if there is an error in the probe.
Using the managed version of clk_get() allows to let the kernel take care
of it.
Fixes:
1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto
engine driver")
cc: stable@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herbert Xu [Fri, 23 Mar 2018 00:14:44 +0000 (08:14 +0800)]
crypto: lrw - Free rctx->ext with kzfree
commit
8c9bdab21289c211ca1ca6a5f9b7537b4a600a02 upstream.
The buffer rctx->ext contains potentially sensitive data and should
be freed with kzfree.
Cc: <stable@vger.kernel.org>
Fixes:
700cb3f5fe75 ("crypto: lrw - Convert to skcipher")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Gerasiov [Sat, 3 Feb 2018 23:50:22 +0000 (02:50 +0300)]
parport_pc: Add support for WCH CH382L PCI-E single parallel port card.
commit
823f7923833c6cc2b16e601546d607dcfb368004 upstream.
WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382
but serial ports are not soldered on board. Detected as
Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])
Signed-off-by: Alexander Gerasiov <gq@redlab-i.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Mon, 8 Jan 2018 14:21:07 +0000 (09:21 -0500)]
media: usbtv: prevent double free in error case
commit
50e7044535537b2a54c7ab798cd34c7f6d900bd2 upstream.
Quoting the original report:
It looks like there is a double-free vulnerability in Linux usbtv driver
on an error path of usbtv_probe function. When audio registration fails,
usbtv_video_free function ends up freeing usbtv data structure, which
gets freed the second time under usbtv_video_fail label.
usbtv_audio_fail:
usbtv_video_free(usbtv); =>
v4l2_device_put(&usbtv->v4l2_dev);
=> v4l2_device_put
=> kref_put
=> v4l2_device_release
=> usbtv_release (CALLBACK)
=> kfree(usbtv) (1st time)
usbtv_video_fail:
usb_set_intfdata(intf, NULL);
usb_put_dev(usbtv->udev);
kfree(usbtv); (2nd time)
So, as we have refcounting, use it
Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Tue, 27 Mar 2018 21:06:14 +0000 (14:06 -0700)]
/dev/mem: Avoid overwriting "err" in read_mem()
commit
b5b38200ebe54879a7264cb6f33821f61c586a7e upstream.
Successes in probe_kernel_read() would mask failures in copy_to_user()
during read_mem().
Reported-by: Brad Spengler <spender@grsecurity.net>
Fixes:
22ec1a2aea73 ("/dev/mem: Add bounce buffer for copy-out")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 27 Feb 2018 16:21:05 +0000 (16:21 +0000)]
mei: remove dev_err message on an unsupported ioctl
commit
bb0829a741792b56c908d7745bc0b2b540293bcc upstream.
Currently the driver spams the kernel log on unsupported ioctls which is
unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway.
I suspect this was originally for debugging purposes but it really is not
required so remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Mon, 5 Mar 2018 11:47:38 +0000 (22:17 +1030)]
serial: 8250: Add Nuvoton NPCM UART
commit
f597fbce38d230af95384f4a04e0a13a1d0ad45d upstream.
The Nuvoton UART is almost compatible with the 8250 driver when probed
via the 8250_of driver, however it requires some extra configuration
at startup.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 6 Mar 2018 08:32:43 +0000 (09:32 +0100)]
USB: serial: cp210x: add ELDAT Easywave RX09 id
commit
1f1e82f74c0947e40144688c9e36abe4b3999f49 upstream.
Add device id for ELDAT Easywave RX09 tranceiver.
Reported-by: Jan Jansen <nattelip@hotmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clemens Werther [Fri, 16 Mar 2018 09:20:46 +0000 (10:20 +0100)]
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
commit
6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream.
Add device id for Harman FirmwareHubEmulator to make the device
auto-detectable by the driver.
Signed-off-by: Clemens Werther <clemens.werther@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Major Hayden [Fri, 23 Feb 2018 20:29:54 +0000 (14:29 -0600)]
USB: serial: ftdi_sio: add RT Systems VX-8 cable
commit
9608e5c0f079390473b484ef92334dfd3431bb89 upstream.
This patch adds a device ID for the RT Systems cable used to
program Yaesu VX-8R/VX-8DR handheld radios. It uses the main
FTDI VID instead of the common RT Systems VID.
Signed-off-by: Major Hayden <major@mhtx.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Mon, 2 Apr 2018 22:58:31 +0000 (15:58 -0700)]
bitmap: fix memset optimization on big-endian systems
commit
21035965f60b0502fc6537b232839389bb4ce664 upstream.
Commit
2a98dc028f91 ("include/linux/bitmap.h: turn bitmap_set and
bitmap_clear into memset when possible") introduced an optimization to
bitmap_{set,clear}() which uses memset() when the start and length are
constants aligned to a byte.
This is wrong on big-endian systems; our bitmaps are arrays of unsigned
long, so bit n is not at byte n / 8 in memory. This was caught by the
Btrfs selftests, but the bitmap selftests also fail when run on a
big-endian machine.
We can still use memset if the start and length are aligned to an
unsigned long, so do that on big-endian. The same problem applies to
the memcmp in bitmap_equal(), so fix it there, too.
Fixes:
2a98dc028f91 ("include/linux/bitmap.h: turn bitmap_set and bitmap_clear into memset when possible")
Fixes:
2c6deb01525a ("bitmap: use memcmp optimisation in more situations")
Cc: stable@kernel.org
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Mon, 23 Oct 2017 21:32:48 +0000 (14:32 -0700)]
usb: dwc2: Improve gadget state disconnection handling
commit
d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 upstream.
In the earlier commit
dad3f793f20f ("usb: dwc2: Make sure we
disconnect the gadget state"), I was trying to fix up the
fact that we somehow weren't disconnecting the gadget state,
so that when the OTG port was plugged in the second time we
would get warnings about the state tracking being wrong.
(This seems to be due to a quirk of the HiKey board where
we do not ever get any otg interrupts, particularly the session
end detected signal. Instead we only see status change
interrupt.)
The fix there was somewhat simple, as it just made sure to
call dwc2_hsotg_disconnect() before we connected things up
in OTG mode, ensuring the state handling didn't throw errors.
But in looking at a different issue I was seeing with UDC
state handling, I realized that it would be much better
to call dwc2_hsotg_disconnect when we get the state change
signal moving to host mode.
Thus, this patch removes the earlier disconnect call I added
and moves it (and the needed locking) to the host mode
transition.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Tested-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Szymon Janc [Mon, 26 Feb 2018 14:41:53 +0000 (15:41 +0100)]
Bluetooth: Fix missing encryption refresh on Security Request
commit
64e759f58f128730b97a3c3a26d283c075ad7c86 upstream.
If Security Request is received on connection that is already encrypted
with sufficient security master should perform encryption key refresh
procedure instead of just ignoring Slave Security Request
(Core Spec 5.0 Vol 3 Part H 2.4.6).
> ACL Data RX: Handle 3585 flags 0x02 dlen 6
SMP: Security Request (0x0b) len 1
Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09)
< HCI Command: LE Start Encryption (0x08|0x0019) plen 28
Handle: 3585
Random number: 0x0000000000000000
Encrypted diversifier: 0x0000
Long term key:
44264272a5c426a9e868f034cf0e69f3
> HCI Event: Command Status (0x0f) plen 4
LE Start Encryption (0x08|0x0019) ncmd 1
Status: Success (0x00)
> HCI Event: Encryption Key Refresh Complete (0x30) plen 3
Status: Success (0x00)
Handle: 3585
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 10 Jan 2018 16:35:43 +0000 (17:35 +0100)]
phy: qcom-ufs: add MODULE_LICENSE tag
commit
59fba0869acae06ff594dd7e9808ed673f53538a upstream.
While the specific UFS PHY drivers (14nm and 20nm) have a module
license, the common base module does not, leading to a Kbuild
failure:
WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o
FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable'
This adds a module description and license tag to fix the build.
I added both Yaniv and Vivek as authors here, as Yaniv sent the initial
submission, while Vivek did most of the work since.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>