kernel/kernel-generic.git
14 years agonommu: don't need get_unmapped_area() for NOMMU
David Howells [Sat, 16 Jan 2010 01:01:35 +0000 (17:01 -0800)]
nommu: don't need get_unmapped_area() for NOMMU

get_unmapped_area() is unnecessary for NOMMU as no-one calls it.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agonommu: remove a superfluous check of vm_region::vm_usage
David Howells [Sat, 16 Jan 2010 01:01:34 +0000 (17:01 -0800)]
nommu: remove a superfluous check of vm_region::vm_usage

In split_vma(), there's no need to check if the VMA being split has a
region that's in use by more than one VMA because:

 (1) The preceding test prohibits splitting of non-anonymous VMAs and regions
     (eg: file or chardev backed VMAs).

 (2) Anonymous regions can't be mapped multiple times because there's no handle
     by which to refer to the already existing region.

 (3) If a VMA has previously been split, then the region backing it has also
     been split into two regions, each of usage 1.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agonommu: struct vm_region's vm_usage count need not be atomic
David Howells [Sat, 16 Jan 2010 01:01:33 +0000 (17:01 -0800)]
nommu: struct vm_region's vm_usage count need not be atomic

The vm_usage count field in struct vm_region does not need to be atomic as
it's only even modified whilst nommu_region_sem is write locked.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agonommu: fix SYSV SHM for NOMMU
David Howells [Sat, 16 Jan 2010 01:01:32 +0000 (17:01 -0800)]
nommu: fix SYSV SHM for NOMMU

Commit c4caa778157dbbf04116f0ac2111e389b5cd7a29 ("file
->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()")
broke SYSV SHM for NOMMU by taking away the pointer to
shm_get_unmapped_area() from shm_file_operations.

Put it back conditionally on CONFIG_MMU=n.

file->f_ops->get_unmapped_area() is used to find out the base address for a
mapping of a mappable chardev device or mappable memory-based file (such as a
ramfs file).  It needs to be called prior to file->f_ops->mmap() being called.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agosysdev: fix prototype for memory_sysdev_class show/store functions
Wu Fengguang [Sat, 16 Jan 2010 01:01:32 +0000 (17:01 -0800)]
sysdev: fix prototype for memory_sysdev_class show/store functions

The function prototype mismatches in call stack:

                [<ffffffff81494268>] print_block_size+0x58/0x60
                [<ffffffff81487e3f>] sysdev_class_show+0x1f/0x30
                [<ffffffff811d629b>] sysfs_read_file+0xcb/0x1f0
                [<ffffffff81176328>] vfs_read+0xc8/0x180

Due to prototype mismatch, print_block_size() will sprintf() into
*attribute instead of *buf, hence user space will read the initial
zeros from *buf:
$ hexdump /sys/devices/system/memory/block_size_bytes
0000000 0000 0000 0000 0000
0000008

After patch:
cat /sys/devices/system/memory/block_size_bytes
0x8000000

This complements commits c29af9636 and 4a0b2b4dbe.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomemory-hotplug: add 0x prefix to HEX block_size_bytes
Wu Fengguang [Sat, 16 Jan 2010 01:01:31 +0000 (17:01 -0800)]
memory-hotplug: add 0x prefix to HEX block_size_bytes

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomemcg: ensure list is empty at rmdir
Daisuke Nishimura [Sat, 16 Jan 2010 01:01:30 +0000 (17:01 -0800)]
memcg: ensure list is empty at rmdir

Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on
success.  But this doesn't guarantee memcg's LRU is really empty, because
there are some cases in which !PageCgrupUsed pages exist on memcg's LRU.

For example:
- Pages can be uncharged by its owner process while they are on LRU.
- race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common().

So there can be a case in which the usage is zero but some of the LRUs are not empty.

OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with
rmdir, accesses the mem_cgroup, so this access can cause a problem if it
races with rmdir because the mem_cgroup might have been freed by rmdir.

Actually, I saw a bug which seems to be caused by this race.

[1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230
[1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0
[1530745.950651] Oops: 0002 [#1] SMP
[1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map
[1530745.950651] CPU 3
[1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
[1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G   M       2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065]
[1530745.950651] RIP: 0010:[<ffffffff810fbc11>]  [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[1530745.950651] RSP: 0018:ffff8803863ddcb8  EFLAGS: 00010002
[1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0
[1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238
[1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643
[1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000
[1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310
[1530745.950651] FS:  0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000
[1530745.950651] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0
[1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0)
[1530745.950651] Stack:
[1530745.950651]  ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a
[1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000
[1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046
[1530745.950651] Call Trace:
[1530745.950651]  [<ffffffff810c739a>] release_pages+0x142/0x1e7
[1530745.950651]  [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112
[1530745.950651]  [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112
[1530745.950651]  [<ffffffff810c78a9>] lru_add_drain+0x76/0x94
[1530745.950651]  [<ffffffff810dba0c>] exit_mmap+0x6e/0x145
[1530745.950651]  [<ffffffff8103f52d>] mmput+0x5e/0xcf
[1530745.950651]  [<ffffffff81043ea8>] exit_mm+0x11c/0x129
[1530745.950651]  [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9
[1530745.950651]  [<ffffffff81045353>] do_exit+0x1f5/0x6b7
[1530745.950651]  [<ffffffff8106133f>] ? up_read+0x2b/0x2f
[1530745.950651]  [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67
[1530745.950651]  [<ffffffff81045898>] do_group_exit+0x83/0xb0
[1530745.950651]  [<ffffffff810458dc>] sys_exit_group+0x17/0x1b
[1530745.950651]  [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b
[1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b
[1530745.950651] RIP  [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80
[1530745.950651]  RSP <ffff8803863ddcb8>
[1530745.950651] CR2: 0000000000000230
[1530745.950651] ---[ end trace c3419c1bb8acc34f ]---
[1530745.950651] Fixing recursive fault but reboot is needed!

The problem here is pages on LRU may contain pointer to stale memcg.  To
make res->usage to be 0, all pages on memcg must be uncharged or moved to
another(parent) memcg.  Moved page_cgroup have already removed from
original LRU, but uncharged page_cgroup contains pointer to memcg withou
PCG_USED bit.  (This asynchronous LRU work is for improving performance.)
If PCG_USED bit is not set, page_cgroup will never be added to memcg's
LRU.  So, about pages not on LRU, they never access stale pointer.  Then,
what we have to take care of is page_cgroup _on_ LRU list.  This patch
fixes this problem by making mem_cgroup_force_empty() visit all LRUs
before exiting its loop and guarantee there are no pages on its LRU.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovirtio: fix section mismatch warnings
Jeff Mahoney [Sat, 16 Jan 2010 01:01:26 +0000 (17:01 -0800)]
virtio: fix section mismatch warnings

Fix fixes the following warnings by renaming the driver structures to be
suffixed with _driver.

WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove()

WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove()

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agovmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimable
KOSAKI Motohiro [Sat, 16 Jan 2010 01:01:25 +0000 (17:01 -0800)]
vmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimable

Commit f50de2d3 (vmscan: have kswapd sleep for a short interval and double
check it should be asleep) can cause kswapd to enter an infinite loop if
running on a single-CPU system.  If all zones are unreclaimble,
sleeping_prematurely return 1 and kswapd will call balance_pgdat() again.
but it's totally meaningless, balance_pgdat() doesn't anything against
unreclaimable zone!

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reported-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Tested-by: Will Newton <will.newton@gmail.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agosmp_call_function_any(): pass the node value to cpumask_of_node()
David John [Sat, 16 Jan 2010 01:01:23 +0000 (17:01 -0800)]
smp_call_function_any(): pass the node value to cpumask_of_node()

The change in acpi_cpufreq to use smp_call_function_any causes a warning
when it is called since the function erroneously passes the cpu id to
cpumask_of_node rather than the node that the cpu is on.  Fix this.

cpumask_of_node(3): node > nr_node_ids(1)
Pid: 1, comm: swapper Not tainted 2.6.33-rc3-00097-g2c1f189 #223
Call Trace:
 [<ffffffff81028bb3>] cpumask_of_node+0x23/0x58
 [<ffffffff81061f51>] smp_call_function_any+0x65/0xfa
 [<ffffffff810160d1>] ? do_drv_read+0x0/0x2f
 [<ffffffff81015fba>] get_cur_val+0xb0/0x102
 [<ffffffff81016080>] get_cur_freq_on_cpu+0x74/0xc5
 [<ffffffff810168a7>] acpi_cpufreq_cpu_init+0x417/0x515
 [<ffffffff81562ce9>] ? __down_write+0xb/0xd
 [<ffffffff8148055e>] cpufreq_add_dev+0x278/0x922

Signed-off-by: David John <davidjon@xenontk.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()
Roland Dreier [Sat, 16 Jan 2010 01:01:22 +0000 (17:01 -0800)]
kernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()

Add BUILD_BUG_ON_NOT_POWER_OF_2()

When code relies on a constant being a power of 2:

#define FOO 512 /* must be a power of 2 */

it would be nice to be able to do:

BUILD_BUG_ON(!is_power_of_2(FOO));

However applying an inline function does not result in a compile-time
constant that can be used with BUILD_BUG_ON(), so trying that gives
results in:

error: bit-field '<anonymous>' width not an integer constant

As suggested by akpm, rather than monkeying around with is_power_of_2()
and risking gcc warts about constant expressions, just create a macro
BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: David Dillow <dave@thedillows.org>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomm/page_alloc: fix the range check for backward merging
Kazuhisa Ichikawa [Sat, 16 Jan 2010 01:01:20 +0000 (17:01 -0800)]
mm/page_alloc: fix the range check for backward merging

The current check for 'backward merging' within add_active_range() does
not seem correct.  start_pfn must be compared against
early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether
the new region is backward-mergeable with the existing range.

Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokfifo: document everywhere that size has to be power of two
Andi Kleen [Sat, 16 Jan 2010 01:01:17 +0000 (17:01 -0800)]
kfifo: document everywhere that size has to be power of two

On my first try using them I missed that the fifos need to be power of
two, resulting in a runtime bug.  Document that requirement everywhere
(and fix one grammar bug)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokfifo: add kfifo_initialized
Andi Kleen [Sat, 16 Jan 2010 01:01:17 +0000 (17:01 -0800)]
kfifo: add kfifo_initialized

Simple inline that checks if kfifo_init() has been executed on a fifo.

This is useful for walking all per CPU fifos, when some of them might not
have been brought up yet.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokfifo: add kfifo_out_peek
Andi Kleen [Sat, 16 Jan 2010 01:01:16 +0000 (17:01 -0800)]
kfifo: add kfifo_out_peek

In some upcoming code it's useful to peek into a FIFO without permanentely
removing data.  This patch implements a new kfifo_out_peek() to do this.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokfifo: sanitize *_user error handling
Andi Kleen [Sat, 16 Jan 2010 01:01:15 +0000 (17:01 -0800)]
kfifo: sanitize *_user error handling

Right now for kfifo_*_user it's not easily possible to distingush between
a user copy failing and the FIFO not containing enough data.  The problem
is that both conditions are multiplexed into the same return code.

Avoid this by moving the "copy length" into a separate output parameter
and only return 0/-EFAULT in the main return value.

I didn't fully adapt the weird "record" variants, those seem
to be unused anyways and were rather messy (should they be just removed?)

I would appreciate some double checking if I did all the conversions
correctly.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokfifo: use void * pointers for user buffers
Andi Kleen [Sat, 16 Jan 2010 01:01:12 +0000 (17:01 -0800)]
kfifo: use void * pointers for user buffers

The pointers to user buffers are currently unsigned char *, which requires
a lot of casting in the caller for any non-char typed buffers.  Use void *
instead.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agotty.h: make tty_port_get() static inline
Randy Dunlap [Sat, 16 Jan 2010 01:01:11 +0000 (17:01 -0800)]
tty.h: make tty_port_get() static inline

I get a few dozen of these warnings when using
  gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2):

In file included from mmotm-2010-0113-1217/init/do_mounts.c:5:
mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get':
mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static

so make the function static inline.

[akpm@linux-foundation.org: may as well convert tty_port_users() also]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoedac: i5000_edac critical fix panic out of bounds
Tamas Vincze [Sat, 16 Jan 2010 01:01:10 +0000 (17:01 -0800)]
edac: i5000_edac critical fix panic out of bounds

EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4)
Kernel panic - not syncing: EDAC MC0: Uncorrected Error  (XEN) Domain 0 crashed: 'noreboot' set - not rebooting.

This happens because FERR_NF_FBD bit 28 is not updated on i5000.  Due to
that, both bits 28 and 29 may be equal to one, returning channel = 3.  As
this value is invalid, EDAC core generates the panic.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568

Signed-off-by: Tamas Vincze <tom@vincze.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agom68knommu: fix invalid flags on coldfire pit clocksource
john stultz [Sat, 16 Jan 2010 01:01:09 +0000 (17:01 -0800)]
m68knommu: fix invalid flags on coldfire pit clocksource

The m68knommu coldfire pit clocksource looks like it was incorrectly
marked as a continuous clocksource.  Running with it marked as a
continuous clocksource could cause hangs when the system switches to
highres mode or enables nohz.

This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit
clocksource.  This will disallow systems using this clocksource from
entering oneshot mode (disabling highres timers and nohz).

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Cc: Steven King <sfking@fdwdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoserial/8250_pnp: add a new Fujitsu Wacom Tablet PC device
Ping [Sat, 16 Jan 2010 01:01:07 +0000 (17:01 -0800)]
serial/8250_pnp: add a new Fujitsu Wacom Tablet PC device

This is a new two finger touch Fujitsu Wacom Tablet PC.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agomarkup_oops.pl: fix error with x86
Hui Zhu [Sat, 16 Jan 2010 01:01:07 +0000 (17:01 -0800)]
markup_oops.pl: fix error with x86

When I try to use markup_oops.pl in x86, I always get:

cat 1 | perl markup_oops.pl ./vmlinux
objdump: --start-address: bad number: NaN
No matching code found

This is because in line:
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) {
  $function = $1;
  $func_offset = $2;
  }

$func_offset will get a number like "0x2"

But in follow code:

my $decodestart = Math::BigInt->from_hex("0x$target") -
Math::BigInt->from_hex("0x$func_offset");

It add other ox to ox2.  Then this value will be set to NaN.

So I made a small patch to fix it.

Signed-off-by: Hui Zhu <teawater@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoviafb: fix acceleration for some chips
Erik-Jan Post [Sat, 16 Jan 2010 01:01:06 +0000 (17:01 -0800)]
viafb: fix acceleration for some chips

Fix a regression in hardware acceleration which made the accelerated
framebuffer unusable on some chips.  These need extra initialization and
an extra flag which is no longer needed/available on current chips.

Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoviafb: do modesetting after updating variables
Erik-Jan Post [Sat, 16 Jan 2010 01:01:05 +0000 (17:01 -0800)]
viafb: do modesetting after updating variables

Reorder viafb_set_par to allow using the updated variables in
viafb_setmode.  This fixes a regression that prevented proper runtime mode
changes.

Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoviafb: fix LCD hardware cursor regression
Florian Tobias Schandinat [Sat, 16 Jan 2010 01:01:03 +0000 (17:01 -0800)]
viafb: fix LCD hardware cursor regression

Although I'd consider this a hardware bug, as there is hardware out that
for whatever reason does not support hardware cursors on LCD output we
have to care about it in the driver.  This fixes a regression (invisible
cursor) introduced by:

    viafb: cleanup viafb_cursor

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reported-by: Julian Wollrath <jwollrath@web.de>
Tested-by: Julian Wollrath <jwollrath@web.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agokfifo: fix kfifo_out_locked race bug
Stefani Seibold [Sat, 16 Jan 2010 01:01:02 +0000 (17:01 -0800)]
kfifo: fix kfifo_out_locked race bug

Fix a wrong optimization in include/linux/kfifo.h which could cause a race
in kfifo_out_locked.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Reported-by: Johan Hovold <jhovold@gmail.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Sat, 16 Jan 2010 18:44:38 +0000 (10:44 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: enable 36bit physical address for hardware status page
  drm/i915: fix eDP pipe mask
  drm/i915: fix pixel color depth setting on eDP
  drm/i915: parse eDP panel color depth from VBT block
  drm/i915: disable LVDS downclock by default
  drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
  drm/i915: Remove chatty execbuf failure message.
  drm/i915: remove loop in Ironlake interrupt handler
  drm/i915: Don't wait interruptible for possible plane buffer flush
  drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
  drm/i915: Read the response after issuing DDC bus switch command
  drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
  drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
  drm/i915: Fix Ironlake M/N/P ranges to match the spec
  drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock
  drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
  drm/i915: disable TV hotplug status check

Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915
non-modeset suspend fix with different comment.

14 years agoMerge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Fri, 15 Jan 2010 22:53:24 +0000 (14:53 -0800)]
Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux

* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
  ARM: MINI2440: Fixup __initdata usage
  ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
  ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator
  ARM: S3C: NAND: Check the existence of nr_map before copying

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Fri, 15 Jan 2010 22:52:44 +0000 (14:52 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 15 Jan 2010 22:51:57 +0000 (14:51 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sentelic - fix left/right horizontal scroll mapping
  Input: pmouse - move Sentelic probe down the list
  Input: add compat support for sysfs and /proc capabilities output
  Input: i8042 - add Dritek quirk for Acer Aspire 5610.
  Input: xbox - do not use GFP_KERNEL under spinlock
  Input: psmouse - fix Synaptics detection when protocol is disabled
  Input: bcm5974 - report ABS_MT events
  Input: davinci_keyscan - add device_enable method to platform data
  Input: evdev - be less aggressive about sending SIGIO notifies
  Input: atkbd - fix canceling event_work in disconnect
  Input: serio - fix potential deadlock when unbinding drivers
  Input: gf2k - fix &&/|| confusion in gf2k_connect()

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88...
Linus Torvalds [Fri, 15 Jan 2010 22:51:39 +0000 (14:51 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: cpumask_of_node() should handle -1 as a node
  alpha: add myself as a maintainer, and drop mention of 2.4

14 years agoMerge branch 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Fri, 15 Jan 2010 22:50:20 +0000 (14:50 -0800)]
Merge branch 'sh/for-2.6.33' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: using correct fifo size for SCIF and SCIFA ports.
  sh: mach-ecovec24: Add motion sensor driver support.

14 years agodrm/i915: enable 36bit physical address for hardware status page
Zhenyu Wang [Tue, 5 Jan 2010 03:25:06 +0000 (11:25 +0800)]
drm/i915: enable 36bit physical address for hardware status page

This enables possible 36bit address mask on 965G that use physical
address for hw status page.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agoinotify: only warn once for inotify problems
Eric Paris [Fri, 15 Jan 2010 17:12:25 +0000 (12:12 -0500)]
inotify: only warn once for inotify problems

inotify will WARN() if it finds that the idr and the fsnotify internals
somehow got out of sync.  It was only supposed to do this once but due
to this stupid bug it would warn every single time a problem was
detected.

Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoinotify: do not reuse watch descriptors
Eric Paris [Fri, 15 Jan 2010 17:12:24 +0000 (12:12 -0500)]
inotify: do not reuse watch descriptors

Since commit 7e790dd5fc937bc8d2400c30a05e32a9e9eef276 ("inotify: fix
error paths in inotify_update_watch") inotify changed the manor in which
it gave watch descriptors back to userspace.  Previous to this commit
inotify acted like the following:

  inotify_add_watch(X, Y, Z) = 1
  inotify_rm_watch(X, 1);
  inotify_add_watch(X, Y, Z) = 2

but after this patch inotify would return watch descriptors like so:

  inotify_add_watch(X, Y, Z) = 1
  inotify_rm_watch(X, 1);
  inotify_add_watch(X, Y, Z) = 1

which I saw as equivalent to opening an fd where

  open(file) = 1;
  close(1);
  open(file) = 1;

seemed perfectly reasonable.  The issue is that quite a bit of userspace
apparently relies on the behavior in which watch descriptors will not be
quickly reused.  KDE relies on it, I know some selinux packages rely on
it, and I have heard complaints from other random sources such as debian
bug 558981.

Although the man page implies what we do is ok, we broke userspace so
this patch almost reverts us to the old behavior.  It is still slightly
racey and I have patches that would fix that, but they are rather large
and this will fix it for all real world cases.  The race is as follows:

 - task1 creates a watch and blocks in idr_new_watch() before it updates
   the hint.
 - task2 creates a watch and updates the hint.
 - task1 updates the hint with it's older wd
 - task removes the watch created by task2
 - task adds a new watch and will reuse the wd originally given to task2

it requires moving some locking around the hint (last_wd) but this should
solve it for the real world and be -stable safe.

As a side effect this patch papers over a bug in the lib/idr code which
is causing a large number WARN's to pop on people's system and many
reports in kerneloops.org.  I'm working on the root cause of that idr
bug seperately but this should make inotify immune to that issue.

Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agodrm/i915: fix eDP pipe mask
Zhenyu Wang [Mon, 11 Jan 2010 21:38:32 +0000 (05:38 +0800)]
drm/i915: fix eDP pipe mask

eDP could be on pipe A or B.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agodrm/i915: fix pixel color depth setting on eDP
Zhenyu Wang [Mon, 11 Jan 2010 21:38:31 +0000 (05:38 +0800)]
drm/i915: fix pixel color depth setting on eDP

Original DP mode_valid check didn't take pixel color depth into account,
which made one 1600x900 eDP panel's mode check invalid because of overclock,
but actually this 6bpc panel does can work with x1 lane at 2.7G. This one
trys to take bpp value properly both in mode validation and mode setting.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agodrm/i915: parse eDP panel color depth from VBT block
Zhenyu Wang [Wed, 13 Jan 2010 03:19:52 +0000 (11:19 +0800)]
drm/i915: parse eDP panel color depth from VBT block

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agodrm/i915: disable LVDS downclock by default
Jesse Barnes [Thu, 14 Jan 2010 20:48:02 +0000 (20:48 +0000)]
drm/i915: disable LVDS downclock by default

Many platform support this feature, and it can provide significant
power savings when the reduced refresh rate is low.  However, on some
platforms a secondary (reduced) timing is provided but not actually
supported by the hardware.  This results in undesirable flicker at
runtime.

So disable the feature by default, but allow users to opt-in to the
reduced clock behavior with a new module parameter, lvds_downclock,
that can be set to 1 to enable the feature.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agodrm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
Zhao Yakui [Wed, 13 Jan 2010 14:10:50 +0000 (14:10 +0000)]
drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agodrm/i915: Remove chatty execbuf failure message.
Eric Anholt [Fri, 15 Jan 2010 21:04:48 +0000 (13:04 -0800)]
drm/i915: Remove chatty execbuf failure message.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> (in principle)
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agodrm/i915: remove loop in Ironlake interrupt handler
Zou Nan hai [Fri, 15 Jan 2010 02:29:06 +0000 (10:29 +0800)]
drm/i915: remove loop in Ironlake interrupt handler

On Ironlake, there is an interrupt master control bit. With the bit
disabled before clearing IIR, we do not need to handle extra interrupt
in a loop. This patch removes the loop in Ironlake interrupt handler.
It fixed irq lost issue on some Ironlake platforms.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: Zou Nan hai <Nanhai.zou@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
14 years agoamd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate
Roel Kluin [Mon, 11 Jan 2010 19:58:21 +0000 (20:58 +0100)]
amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate

Add a missing iterator variable thus fixing the conditional of the
for-loop in amd64_get_scrub_rate().

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
14 years agoARM: MINI2440: Fixup __initdata usage
Ben Dooks [Fri, 15 Jan 2010 08:04:42 +0000 (17:04 +0900)]
ARM: MINI2440: Fixup __initdata usage

Remove some of the __initdata tags which are currently inappropriate for
platform_device and some of the platform data. These can be returned once
support for copying platform devices and data is added.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
14 years agoARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
Uri Yosef [Fri, 15 Jan 2010 07:56:05 +0000 (16:56 +0900)]
ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier

This patch fix mini2440 crash on boot due to improper __initdata
qualifier on mini2440_led1_pdata.

Signed-off-by: Uri Yosef <uri.yosef@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
14 years agoARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator
Mark Brown [Wed, 13 Jan 2010 13:57:04 +0000 (13:57 +0000)]
ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator

Since the fixed voltage regulator grew support for GPIO based
enables and GPIO 0 is valid on some systems we need to specify
that there is no valid GPIO enable control.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
14 years agoserial: sh-sci: using correct fifo size for SCIF and SCIFA ports.
Markus Pietrek [Thu, 14 Jan 2010 23:33:20 +0000 (08:33 +0900)]
serial: sh-sci: using correct fifo size for SCIF and SCIFA ports.

The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF
ports. If an incorrect size is used, the serial core will enforce an
early shutdown on the port, especially with baudrates < 9600.

Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
14 years agosh: mach-ecovec24: Add motion sensor driver support.
NISHIMOTO Hiroki [Thu, 14 Jan 2010 23:25:00 +0000 (08:25 +0900)]
sh: mach-ecovec24: Add motion sensor driver support.

This patch adds support for the lis3lv02d motion sensor connected via
i2c on the Ecovec board. Tested with evtest.

Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
14 years agoalpha: cpumask_of_node() should handle -1 as a node
Anton Blanchard [Thu, 14 Jan 2010 18:21:35 +0000 (13:21 -0500)]
alpha: cpumask_of_node() should handle -1 as a node

CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
CC: linux-alpha@vger.kernel.org
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Blanchard <anton@samba.org>
14 years agoalpha: add myself as a maintainer, and drop mention of 2.4
Matt Turner [Thu, 14 Jan 2010 18:15:20 +0000 (13:15 -0500)]
alpha: add myself as a maintainer, and drop mention of 2.4

CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
CC: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>
14 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 14 Jan 2010 16:37:53 +0000 (08:37 -0800)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] tape_char: add missing compat_ptr conversion
  [S390] zcrypt: add sanity check before copy_from_user()
  [S390] unwire sys_recvmmsg again
  [S390] con3215: remove empty ioctl function
  [S390] dasd: add proper compat pointer conversion for symmetrix ioctl
  [S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls
  [S390] bug: implement arch specific __WARN macro
  [S390] Move __cpu_logical_map to smp.c
  [S390] tape_block: remove ioctl function
  [S390] smp: remove volatile type quilifier from __cpu_logical_map
  [S390] smp: setup smp_processor_id early
  [S390] use helpers for rlimits
  [S390] fs3270: add missing compat ptr conversion
  [S390] vmcp: add missing compat ptr conversion
  [S390] cio: add missing compat ptr conversion
  [S390] dasd: add missing compat ptr conversion
  [S390] remove superfluous TIF_USEDFPU bit
  [S390] duplicate SIGTRAP on signal delivery.
  [S390] clear TIF_SINGLE_STEP for new process.
  [S390] fix loading of PER control registers for utrace.

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 14 Jan 2010 16:36:15 +0000 (08:36 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n
  ipv6: skb_dst() can be NULL in ipv6_hop_jumbo().
  tg3: Update copyright and driver version
  tg3: Disable 5717 serdes and B0 support
  tg3: Add reliable serdes detection for 5717 A0
  tg3: Fix std rx prod ring handling
  tg3: Fix std prod ring nicaddr for 5787 and 57765
  sfc: Fix conditions for MDIO self-test
  sfc: Fix polling for slow MCDI operations
  e1000e: workaround link issues on busy hub in half duplex on 82577/82578
  e1000e: MDIO slow mode should always be done for 82577
  ixgbe: update copyright dates
  ixgbe: Do not attempt to perform interrupts in netpoll when down
  cfg80211: fix refcount imbalance when wext is disabled
  mac80211: fix queue selection for data frames on monitor interfaces
  iwlwifi: silence buffer overflow warning
  iwlwifi: disable tx on beacon update notification
  iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr
  mac80211: fix endian error
  mac80211: add missing sanity checks for action frames
  ...

14 years agoARM: S3C: NAND: Check the existence of nr_map before copying
Ramax Lo [Thu, 14 Jan 2010 02:15:05 +0000 (10:15 +0800)]
ARM: S3C: NAND: Check the existence of nr_map before copying

Since the structure field nr_map is optional, we need to check whether the
chip number map is provided to avoid unexpected NULL pointer exception.

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
14 years agonet: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n
Octavian Purdila [Thu, 14 Jan 2010 02:10:36 +0000 (18:10 -0800)]
net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n

Fixed build errors introduced by commit 7ad6848c (ip: fix mc_loop
checks for tunnels with multicast outer addresses)

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoipv6: skb_dst() can be NULL in ipv6_hop_jumbo().
David S. Miller [Thu, 14 Jan 2010 01:27:37 +0000 (17:27 -0800)]
ipv6: skb_dst() can be NULL in ipv6_hop_jumbo().

This fixes CERT-FI FICORA #341748

Discovered by Olli Jarva and Tuomo Untinen from the CROSS
project at Codenomicon Ltd.

Just like in CVE-2007-4567, we can't rely upon skb_dst() being
non-NULL at this point.  We fixed that in commit
e76b2b2567b83448c2ee85a896433b96150c92e6 ("[IPV6]: Do no rely on
skb->dst before it is assigned.")

However commit 483a47d2fe794328d29950fe00ce26dd405d9437 ("ipv6: added
net argument to IP6_INC_STATS_BH") put a new version of the same bug
into this function.

Complicating analysis further, this bug can only trigger when network
namespaces are enabled in the build.  When namespaces are turned off,
the dev_net() does not evaluate it's argument, so the dereference
would not occur.

So, for a long time, namespaces couldn't be turned on unless SYSFS was
disabled.  Therefore, this code has largely been disabled except by
people turning it on explicitly for namespace development.

With help from Eugene Teo <eugene@redhat.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotg3: Update copyright and driver version
Matt Carlson [Tue, 12 Jan 2010 10:11:40 +0000 (10:11 +0000)]
tg3: Update copyright and driver version

This patch updates the copyright notice for 2010 and updates the version
number to 3.106.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotg3: Disable 5717 serdes and B0 support
Matt Carlson [Tue, 12 Jan 2010 10:11:39 +0000 (10:11 +0000)]
tg3: Disable 5717 serdes and B0 support

The B0 revision of the 5717 will not get enough testing by the time
2.6.33 ships.  Since the kernel is already at RC3, serdes support
will require too many patches to fix.  For these reasons, this patch
disables 5717 serdes support and will refuse to attach to all 5717
devices that are later than an A0 revision.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotg3: Add reliable serdes detection for 5717 A0
Matt Carlson [Tue, 12 Jan 2010 10:11:38 +0000 (10:11 +0000)]
tg3: Add reliable serdes detection for 5717 A0

The serdes status bit does not work as intended for the 5717 A0.
This patch implements an alternative detection scheme that will only be
valid for A0 revisions.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotg3: Fix std rx prod ring handling
Matt Carlson [Tue, 12 Jan 2010 10:11:37 +0000 (10:11 +0000)]
tg3: Fix std rx prod ring handling

There are some tg3 devices that require the driver to post new rx
buffers in smaller increments.  Commit
4361935afe3abc3e5a93006b99197fac1fabbd50, "tg3: Consider
rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx
producer ring updates, but it does not make any special considerations
for the above-mentioned devices.  For those devices, it is possible for
the driver to hit the special case path, which updates the hardware
mailbox register but skips updating the shadow software mailbox member.
If the special case path represents the final mailbox update for this
ISR iteration, the hardware and software mailbox values will be out of
sync.  Ultimately, this will cause the driver to use a stale mailbox
value on the next iteration, which will appear to the hardware as a
large rx buffer update.  Bad things ensue.

The fix is to update the software shadow mailbox member when the special
case path is taken.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotg3: Fix std prod ring nicaddr for 5787 and 57765
Matt Carlson [Tue, 12 Jan 2010 10:11:36 +0000 (10:11 +0000)]
tg3: Fix std prod ring nicaddr for 5787 and 57765

Commit 87668d352aa8d135bd695a050f18bbfc7b50b506, titled "tg3: Don't
touch RCB nic addresses", tried to avoid assigning the nic address of
the standard producer ring.  Unfortunately, the default nic address is
not correct for the 5787, the 5755M, or the 57765.  This patch
reenables the old behavior and opts out of the assignment only
for the 5717.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Tested-by: Chow Loong Jin <hyperair@ubuntu.com>
Tested-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Fix conditions for MDIO self-test
Ben Hutchings [Wed, 13 Jan 2010 10:59:13 +0000 (10:59 +0000)]
sfc: Fix conditions for MDIO self-test

The MDIO self-test should not be run on boards without an MDIO PHY,
such as SFN5122F-R3 and later revisions.  It should also not try to
address a specific MMD in an MDIO clause 22 PHY.  Check the
mode_support field to decide which mode to use, if any.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Fix polling for slow MCDI operations
Ben Hutchings [Wed, 13 Jan 2010 04:34:25 +0000 (04:34 +0000)]
sfc: Fix polling for slow MCDI operations

When the interface is down and we are using polled mode for MCDI
operations, we busy-wait for completion for approximately 1 jiffy
using udelay() and then back off to schedule().  But the completion
will not wake the task, since we are using polled mode!  We must use
schedule_timeout_uninterruptible() instead.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoe1000e: workaround link issues on busy hub in half duplex on 82577/82578
Bruce Allan [Wed, 13 Jan 2010 01:53:08 +0000 (01:53 +0000)]
e1000e: workaround link issues on busy hub in half duplex on 82577/82578

This patch removes a delay in hardware after every received packet allowing
more time for transmitted packets to go out in between received packets in
half duplex.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoe1000e: MDIO slow mode should always be done for 82577
Bruce Allan [Wed, 13 Jan 2010 01:52:49 +0000 (01:52 +0000)]
e1000e: MDIO slow mode should always be done for 82577

A previous 82577 workaround that set the MDIO access speed to slow mode for
every PHY register read/write when the cable is unplugged should instead
set the access mode to always be slow before any PHY register access.
Since the mode bit gets cleared when the PHY is reset, set the mode after
every PHY reset.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: update copyright dates
Shannon Nelson [Wed, 13 Jan 2010 01:49:34 +0000 (01:49 +0000)]
ixgbe: update copyright dates

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: Do not attempt to perform interrupts in netpoll when down
Alexander Duyck [Wed, 13 Jan 2010 01:49:13 +0000 (01:49 +0000)]
ixgbe: Do not attempt to perform interrupts in netpoll when down

This patch resolves issues seen when running netconsole and rebooting via
reboot -f.  The issue was due to the fact that we were attempting to
perform interrupt actions when the q_vectors and rings had already been
freed via the ixgbe_shutdown routines.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6
Linus Torvalds [Thu, 14 Jan 2010 00:15:09 +0000 (16:15 -0800)]
Merge branch 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6

* 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6:
  xen: fix hang on suspend.

14 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 14 Jan 2010 00:13:57 +0000 (16:13 -0800)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: change drm set mode messages as DRM_DEBUG
  drm: fix crtc no modes printf + typo
  drm/radeon/kms: only evict to GTT if CP is ready
  drm/radeon/kms: Fix crash getting TV info with no BIOS.
  drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2)
  drm/radeon/kms/r6xx+: make irq handler less verbose
  drm/radeon/kms: fix up LVDS handling on macs (v2)

14 years agozlib: Fix build of powerpc boot wrapper
Benjamin Herrenschmidt [Wed, 13 Jan 2010 05:19:34 +0000 (16:19 +1100)]
zlib: Fix build of powerpc boot wrapper

Commit ac4c2a3bbe5db5fc570b1d0ee1e474db7cb22585 broke the build
of all powerpc boot wrappers.

It attempts to add an include of autoconf.h but used the wrong
path for it. It also adds -D__KERNEL__ to our boot wrapper, both
things that we pretty much didn't do on purpose so far.

We want our boot wrapper to remain independent enough of the kernel
for various reasons, one of them being that you can "wrap" an existing
kernel at distro install time which allows to ship one kernel image
and a set of boot wrappers for different platforms, the wrappers
don't have to be built out of the same kernel build tree.

It's also incorrect to do what the patch does in our boot environment
since we may not have a proper alignment exception handler which means
we may not be able to fixup the few cases where an unaligned access will
need SW emulation (depends on the core variant, could be when crossing
page or segment boundaries for example).

This patch fixes it by putting the old code back in and using the
new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
is set, which happens not to be set on powerpc since we don't include
autoconf.h. It also reverts the changes to our boot wrapper Makefile.

This means that x86 should, afaik, keep the optimisations since its
boot wrapper does include autoconf.h and define __KERNEL__ (though I
doubt they make that much different outside of slow embedded processors).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Thu, 14 Jan 2010 00:10:13 +0000 (16:10 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Add BTN_TOOL_FINGER for pad button reporting
  HID: add device IDs for new model of Apple Wireless Keyboard
  HID: fix pad button definition in hid-wacom
  HID: Support 171 byte variant of Samsung USB IR receiver
  HID: blacklist ET&T TC5UH touchscreen controller

14 years agoMerge branch 'for-33' of git://repo.or.cz/linux-kbuild
Linus Torvalds [Thu, 14 Jan 2010 00:09:59 +0000 (16:09 -0800)]
Merge branch 'for-33' of git://repo.or.cz/linux-kbuild

* 'for-33' of git://repo.or.cz/linux-kbuild:
  Makefile: do not override LC_CTYPE
  kbuild: really fix bzImage build with non-bash sh

14 years agovfs: Fix vmtruncate() regression
OGAWA Hirofumi [Wed, 13 Jan 2010 12:14:09 +0000 (21:14 +0900)]
vfs: Fix vmtruncate() regression

If __block_prepare_write() was failed in block_write_begin(), the
allocated blocks can be outside of ->i_size.

But new truncate_pagecache() in vmtuncate() does nothing if new < old.
It means the above usage is not working anymore.

So, this patch fixes it by removing "new < old" check. It would need
more cleanup/change. But, now -rc and truncate working is in progress,
so, this tried to fix it minimum change.

Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'fasync-helper'
Linus Torvalds [Wed, 13 Jan 2010 21:42:49 +0000 (13:42 -0800)]
Merge branch 'fasync-helper'

* fasync-helper:
  fasync: split 'fasync_helper()' into separate add/remove functions

14 years ago[S390] tape_char: add missing compat_ptr conversion
Heiko Carstens [Wed, 13 Jan 2010 19:44:44 +0000 (20:44 +0100)]
[S390] tape_char: add missing compat_ptr conversion

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] zcrypt: add sanity check before copy_from_user()
Heiko Carstens [Wed, 13 Jan 2010 19:44:43 +0000 (20:44 +0100)]
[S390] zcrypt: add sanity check before copy_from_user()

It's not obvious that copy_from_user() is called with a sane length
parameter here. Even though it currently seems to be correct better
add a check to prevent stack corruption / exploits.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] unwire sys_recvmmsg again
Heiko Carstens [Wed, 13 Jan 2010 19:44:42 +0000 (20:44 +0100)]
[S390] unwire sys_recvmmsg again

sys_recvmmsg is reachable via sys_socketcall. So unwire it again since
there is no point in having two entry points for it.
Also put it to the ignore list so we don't get reminded anymore in order
to wire it up.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] con3215: remove empty ioctl function
Heiko Carstens [Wed, 13 Jan 2010 19:44:41 +0000 (20:44 +0100)]
[S390] con3215: remove empty ioctl function

...instead of adding a compat ioctl function which would do nothing
as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] dasd: add proper compat pointer conversion for symmetrix ioctl
Heiko Carstens [Wed, 13 Jan 2010 19:44:40 +0000 (20:44 +0100)]
[S390] dasd: add proper compat pointer conversion for symmetrix ioctl

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls
Heiko Carstens [Wed, 13 Jan 2010 19:44:39 +0000 (20:44 +0100)]
[S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] bug: implement arch specific __WARN macro
Heiko Carstens [Wed, 13 Jan 2010 19:44:38 +0000 (20:44 +0100)]
[S390] bug: implement arch specific __WARN macro

This one will trap, generates shorter code and emits better debug data
than the generic version.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] Move __cpu_logical_map to smp.c
Heiko Carstens [Wed, 13 Jan 2010 19:44:37 +0000 (20:44 +0100)]
[S390] Move __cpu_logical_map to smp.c

Finally move it to the place where it belongs to and make get rid of
it for !CONFIG_SMP.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] tape_block: remove ioctl function
Heiko Carstens [Wed, 13 Jan 2010 19:44:36 +0000 (20:44 +0100)]
[S390] tape_block: remove ioctl function

This is just a complicated construct which always returns -EINVAL.
Just remove it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] smp: remove volatile type quilifier from __cpu_logical_map
Heiko Carstens [Wed, 13 Jan 2010 19:44:35 +0000 (20:44 +0100)]
[S390] smp: remove volatile type quilifier from __cpu_logical_map

Remove pointless qualifier.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] smp: setup smp_processor_id early
Heiko Carstens [Wed, 13 Jan 2010 19:44:34 +0000 (20:44 +0100)]
[S390] smp: setup smp_processor_id early

smp_processor_id() is supposed to work before setup_arch() gets called.
Before that smp_processor_id() may return just an arbitrary value that
is contained in the uninitialized boot lowcore.
So provide the arch function which will override the weak function in
init/main.c.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] use helpers for rlimits
Jiri Slaby [Wed, 13 Jan 2010 19:44:33 +0000 (20:44 +0100)]
[S390] use helpers for rlimits

Make sure compiler won't do weird things with limits. E.g. fetching
them twice may return 2 different values after writable limits are
implemented.

I.e. either use rlimit helpers added in
3e10e716abf3c71bdb5d86b8f507f9e72236c9cd
or ACCESS_ONCE if not applicable.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] fs3270: add missing compat ptr conversion
Heiko Carstens [Wed, 13 Jan 2010 19:44:32 +0000 (20:44 +0100)]
[S390] fs3270: add missing compat ptr conversion

Add missing compat ptr conversion including two additional
whitespace changes that aren't worth a separate patch.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] vmcp: add missing compat ptr conversion
Heiko Carstens [Wed, 13 Jan 2010 19:44:31 +0000 (20:44 +0100)]
[S390] vmcp: add missing compat ptr conversion

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] cio: add missing compat ptr conversion
Heiko Carstens [Wed, 13 Jan 2010 19:44:30 +0000 (20:44 +0100)]
[S390] cio: add missing compat ptr conversion

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] dasd: add missing compat ptr conversion
Heiko Carstens [Wed, 13 Jan 2010 19:44:29 +0000 (20:44 +0100)]
[S390] dasd: add missing compat ptr conversion

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] remove superfluous TIF_USEDFPU bit
Martin Schwidefsky [Wed, 13 Jan 2010 19:44:28 +0000 (20:44 +0100)]
[S390] remove superfluous TIF_USEDFPU bit

The TIF_USEDFPU bit is always 0 for s390 and it is not tested anywhere.
Remove the bit. At the same time remove the calls to clear_used_math()
as well. The PF_USED_MATH bit is never set for s390 either.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] duplicate SIGTRAP on signal delivery.
Martin Schwidefsky [Wed, 13 Jan 2010 19:44:27 +0000 (20:44 +0100)]
[S390] duplicate SIGTRAP on signal delivery.

The code in do_signal sets the TIF_SINGLE_STEP bit and calls
tracehook_signal_handler after the signal frame has been set up.
This causes two SIGTRAP signals to be delivered to the tracer.
Stop setting the TIF_SINGLE_STEP bit in do_signal to get the
correct number of SIGTRAPs.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] clear TIF_SINGLE_STEP for new process.
Martin Schwidefsky [Wed, 13 Jan 2010 19:44:26 +0000 (20:44 +0100)]
[S390] clear TIF_SINGLE_STEP for new process.

Clear the TIF_SINGLE_STEP bit in copy_thread. The new process did not get
a PER event of its own. It is wrong deliver a SIGTRAP that was meant for
the parent process.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] fix loading of PER control registers for utrace.
Martin Schwidefsky [Wed, 13 Jan 2010 19:44:25 +0000 (20:44 +0100)]
[S390] fix loading of PER control registers for utrace.

If the current task enables / disables PER tracing for itself the
PER control registers need to be loaded in FixPerRegisters.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years agoMakefile: do not override LC_CTYPE
Michal Marek [Fri, 8 Jan 2010 11:25:37 +0000 (12:25 +0100)]
Makefile: do not override LC_CTYPE

Setting LC_CTYPE=C breaks localized messages in some setups. With only
LC_COLLATE=C and LC_NUMERIC=C, we get almost all we need, except for not
so defined character classes and tolower()/toupper(). The former is not
a big issue, because we can assume that e.g. [:alpha:] will always
include a-zA-Z and we only ever process ASCII input. The latter seems
only affect arch/sh/tools/gen-mach-types, which we can handle separately.

So after this patch the meaning of ranges like [a-z], the behavior of
sort and join, etc. should be the same everywhere and at the same time
gcc should be able to print localized waring and error messages.
LC_NUMERIC=C might not be necessary, but setting it doesn't hurt.

Reported-by: Simon Horman <horms@verge.net.au>
Reported-by: Sergei Trofimovich <slyfox@inbox.ru>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Tested-by: Simon Horman <horms@verge.net.au>
Tested-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
14 years agokbuild: really fix bzImage build with non-bash sh
Jonathan Nieder [Mon, 28 Dec 2009 19:38:27 +0000 (19:38 +0000)]
kbuild: really fix bzImage build with non-bash sh

In an x86 build with CONFIG_KERNEL_LZMA enabled and dash as sh,
arch/x86/boot/compressed/vmlinux.bin.lzma ends with
'\xf0\x7d\x39\x00' (16 bytes) instead of the 4 bytes intended and
the resulting vmlinuz fails to boot.  This improves on the
previous behavior, in which the file contained the characters
'-ne ' as well, but not by much.

Previous commits replaced "echo -ne" first with "/bin/echo -ne",
then "printf" in the hope of improving portability, but none of
these commands is guaranteed to support hexadecimal escapes on
POSIX systems.  So use the shell to convert from hexadecimal to
octal.

With this change, an LZMA-compressed kernel built with dash as sh
boots correctly again.

Reported-by: Sebastian Dalfuß <sd@sedf.de>
Reported-by: Oliver Hartkopp <oliver@hartkopp.net>
Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alek Du <alek.du@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
14 years agoHID: wacom: Add BTN_TOOL_FINGER for pad button reporting
Przemo Firszt [Sat, 9 Jan 2010 14:20:03 +0000 (15:20 +0100)]
HID: wacom: Add BTN_TOOL_FINGER for pad button reporting

Without this patch xf86-input-wacom driver wasn't able to properly recognise
pad button events. It was also causing some problems with button mapping.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: add device IDs for new model of Apple Wireless Keyboard
Christian Schuerer-Waldheim [Wed, 6 Jan 2010 13:49:57 +0000 (14:49 +0100)]
HID: add device IDs for new model of Apple Wireless Keyboard

Added device IDs for the new model of the Apple Wireless Keyboard
(November 2009).

Signed-off-by: Christian Schuerer-Waldheim <csw@xray.at>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: fix pad button definition in hid-wacom
Przemo Firszt [Mon, 4 Jan 2010 11:32:00 +0000 (12:32 +0100)]
HID: fix pad button definition in hid-wacom

This fix is required for xorg driver to recognise 2 pad buttons

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoxen: fix hang on suspend.
Ian Campbell [Thu, 17 Dec 2009 13:57:09 +0000 (13:57 +0000)]
xen: fix hang on suspend.

In 65f63384 "xen: improve error handling in do_suspend" I said:
    - xs_suspend()/xs_resume() and dpm_suspend_noirq()/dpm_resume_noirq() were not
      nested in the obvious way.
and changed the ordering of the calls as so:
    BEFORE AFTER
    xs_suspend dpm_suspend_noirq
    dpm_suspend_noirq xs_suspend
    *SUSPEND* *SUSPEND*
    dpm_resume_noirq dpm_resume_noirq
    xs_resume xs_resume
Clearly this is not an improvement and I was talking rubbish.

In particular the new ordering is susceptible to a hang if a xenstore write is
in progress at the point at which the suspend kicks in. When the suspend
process calls xs_suspend it tries to take the request_mutex but if a write is
in progress it could be looping in xenbus_xs.c:read_reply() waiting for
something to arrive on &xs_state.reply_list while holding the request_mutex
(taken in the caller of read_reply).

However if we have done dpm_suspend_noirq before xs_suspend then we won't get
any more xenstore interrupts and process_msg() will never be woken up to add
anything to the reply_list.

Fix this by calling xs_suspend before dpm_suspend_noirq. If dpm_suspend_noirq
fails then make sure we go through the xs_suspend_cancel() code path.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
14 years agoInput: sentelic - fix left/right horizontal scroll mapping
Tai-hwa Liang [Wed, 13 Jan 2010 08:25:35 +0000 (00:25 -0800)]
Input: sentelic - fix left/right horizontal scroll mapping

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>