staging: fbtft: use init function instead of init sequence

This patch converts the default init sequence of the ST7789V
display controller into an init function, as init sequences
are considered deprecated by the maintainers of fbtft.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: remove redundant set_addr_win() function

This patch removes the function set_addr_win() from fb_st7789v.c, as its
definition is redundant to the default implementation fbtft_set_addr_win()
which can be found in fbtft-core.c.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: use MIPI DCS for ST7789V and C-Berry28

This patch makes use of the standard MIPI Display Command Set to remove
redundant entries from the command enum of the ST7789V display controller
and also some of the magic constants found in the init sequence of the
C-Berry28 display.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: add & use local variable to simplify references

Add local variable scanned_queue to rtw_createbss_cmd23a_callback()
and use it (5x) to simplify references.

Addresses checkpatch.pl WARNING: line over 80 characters

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: move constant to right of comparison test

Move constant to right of comparison test to improve readability.

Addresses checkpatch.pl:
WARNING: Comparisons should place the constant on the
right side of the test

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: replace printk() with netdev_err()

Replace printk() with netdev_err() for uniform error reporting.
Issue found by checkpatch.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Add space around '*'

Add space around operator '*'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '*' (ctx:VxV)

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Add space around '*'

Add space around operator '*'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '*' (ctx:VxV)

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: core: rtw_wlan_util: fix misleading indentation

For loop is outside of the else branch of the above conditional statement.
Fixing misleading indentation.

Fix a smatch warning:
drivers/staging/rtl8723au/core/rtw_wlan_util.c:528
WMMOnAssocRsp23a() warn: curly braces intended?

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Replace kmalloc with kmalloc_array

Replace kmalloc with specialized function kmalloc_array
when the size is a multiplication of:
number_of_elements * size_of_element

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: netlogic: Do not use multiple blank lines.

Remove multiple blank lines. Problem found using checkpatch.pl
"CHECK: Please don't use multiple blank lines"

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: add spaces around binary operator '|'

This patch adds spaces around binary operator '|'.
Done with coccinelle semantic patch:

@@
identifier x, y, z;
@@
(
- x|y|z
+ x | y | z
|
- x|y
+ x | y
)

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unnecessary brackets

This patch removes unnecessary brackets when dealing with
unary operators like '&'.
Done with coccinelle semantic patch:

@@
expression e;
@@

(
- &(e)
+ &e
)

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unnecessary space after cast

This patch removes unnecessary spaces after the cast.
Patch done with coccinelle semantic patch:

@rule0@
type t;
identifier e;
constant c;
expression expr;
@@

(
- (t) e
+ (t)e
|
- (t) c
+ (t)c
|
- (t) expr
+ (t)expr
)

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: properly indent to match open paranthesis

Indent parameters and arguments passed to function calls to match
open paranthesis

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unnecessary blank lines

This patch removes the unnecessary blank lines before a closed
bracket and after an open bracket.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: magnetometer: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: gyro: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: trigger: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: frequency: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: cdc: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: meter: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: light: Remove explicit comparisons

Remove comparisons to 0 or NULL

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skein: fix coding style

Added spaces around binary operators.

Signed-off-by: Tatuev Anton <tatuev.a.a@yandex.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: Add space around '%'

Add space around operator '%'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '%' (ctx:VxV)

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Do not use multiple blank lines.

Remove multiple blank lines. Problem found using checkpatch.pl
"CHECK: Please don't use multiple blank lines".

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: Replace kmalloc with kmalloc_array

Replace kmalloc with specialized function kmalloc_array
when the size is a multiplication of:
number_of_elements * size_of_element

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Remove explicit NULL comparison

Remove the explicit NULL comparison and rewrite in a compact form.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Remove explicit NULL comparison

Remove the explicit NULL comparison and rewrite in a compact form.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: spaces preferred around operands

Clean up all instances of checkpatch.pl checks:
CHECK: spaces preferred around that '+'
(and other operands)

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: braces should be used on all arms

Fix all instances of the following checkpatch.pl check:
CHECK: braces {} should be used on all arms of this statement

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove boolean comparisons

Boolean tests do not need explicit comparison to true or false.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: Remove explicit NULL comparison

Rewrite explicit NULL comparison in its simpler form.
<smpl>
@NULL_REPLACE@
expression e;
@@

-e == NULL
+ !e

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix misleading indentation

Code is correct, i needs to be moved back by 2 to correct for the last
iteration of the while loop, since READ_NEXT_PAIR advances two. Fixing
the misleading indentation.

Fix a smatch warning:
drivers/staging/rtl8188eu/hal/rf_cfg.c:217
rtl88e_phy_config_rf_with_headerfile() warn: curly braces intended?

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu : BIT() macro cleanup

Use the BIT(x) macro directly instead using multiple
BITX defines.

Signed-off-by: Anish Bhatt <anish@gatech.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: _rtl92e_fw_boot_cpu: Remove unneeded goto

Drop ugly label as no resource cleanup is needed.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: fw: Use netdev_dbg instead of RT_TRACE

Drop legacy logging system.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove _rtl92e_fw_download_code()

Reuse  rtl92e_send_cmd_pkt() instead.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Swap firmware endian in _rtl92e_fw_prepare()

Remove endian swap from  _rtl92e_fw_download_code(),
this way it can be replaced with _rtl92e_send_cmd_pkt().

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Add _rtl92e_fw_prepare

Add function to request and prepare firmware image.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Add _rtl92e_wait_for_fw()

Add function waiting for firmware load/boot;
Remove _rtl92e_is_fw_ready() that is obsolete (can be replaced
with  _rtl92e_wait_for_fw().

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: init_fw: Drop unneded check

rst_opt is always equal to OPT_SYSTEM_RESET in this scope.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rt_firmware::firmware_status to status

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Add rt_fw_blob

rt_fw_blob contains single firmware blob and its size.
Update firmware loading code accordingly.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: cmd_pkt: Handle INIT packets

Add support for DESC_PACKET_TYPE_INIT to rtl92e_send_cmd_pkt().
With this generalization, _rtl92e_fw_download_code() may be removed
after slight modification.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Use macro to represent fragmentation threshold

Add CMDPACKET_FRAG_SIZE macro and use it as fragmentation threshold
in send_cmd_pkt functions.
This makes rt_firmware::cmdpacket_frag_thresold and
 rtl92e_init_fw_param() obsolete.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: cmdpkt: Pass data as const void*

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: cmdpkt: Reorder arguments

Use send_cmd_pkt(dev, type, data , size) order to avoid confusion

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: cmdpkt: Simplify argument names

Rename:
codevirtualaddress -> data
buffer_len -> len
packettype -> type

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: cmdpkt: Use packettype properly

rtl92e_send_cmd_pkt used hardcoded NORMAL packet type.

As it may be used to send other packet types as well - use
provided packet type instead of defaults.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl_dm: Use proper packet type

rtl92e_send_cmd_packet sends only NORMAL packets, passing
invalid type (even it it's ignored) is confusing.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: emxx_udc: Add space around operator.

Add a space around '>>' operator.
Problem found using checkpatch.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Reviewed-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Remove boolean comparisons

Boolean tests do not need explicit comparison to true or false.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: remove obsolete driver

Remove support for Qleadtek Flash-OFDM modems. Telecom carrier is
discontinuing service for the radio technology.
See http://www.gtigroup.org/news/ind/2015-08-18/6996.html.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up pci9118_ai_setup_dma()

For aesthetics, init the dmalen[01] local variables when they are declared.

Use a local variable, 'scan_bytes', for the (devpriv->ai_n_realscanlen << 1)
calculation. For aesthetics and clarification, use comedi_bytes_per_sample()
instead of the '<< 1' shift to calculate the value.

The local variable 'i' is badly named. Remove it and use a local variable
'tmp' where it is used.

When checking the DMA buffer lengths for non-neverending commands the
scan length calculation, (devpriv->ai_n_realscanlen << 1) * cmd->stop_arg,
could overflow. Use and unsigned long long local variable to hold the
calculation and avoid the overflow.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename interrupt_*() functions

For aesthetics, rename these functions so it they namespace associated
with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename move_block_from_dma()

Rename this function so it has namespace associated with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename valid_samples_in_act_dma_buf()

Rename this function so it has namespace associated with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename interrupt_pci9118_ai_mode4_switch()

For aesthetics, remove "interrupt_" from this functions name to shorten
it a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove PCI9118_CHANLEN

This define is only used to initialize the analog input sudevice
'len_chanlist'. Remove the define and just open code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove unused defines

These defines are not used in the driver. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up check_channel_list()

Rename this function to give it namespace associated with the driver.

Currently this function is called by both the AI (*do_cmdtest) and the (*do_cmd)
functions. It really only needs to be called by the (*do_cmdtest) to validate
that the chanlist meets the requirements of the hardware. It's only called by
the (*do_cmd) to verify that the scan length is not to large after adding the
extra samples needed to satisfy the DMA.

Move the extra scan length check into the (*do_cmd) function and remove the
unnecessary parameters 'frontadd' and 'backadd'.

Tidy up the reset of the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove unnecessary check in check_channel_list()

Step 3 of the AI (*do_cmdtest) validates that the cmd->chanlist_len is >= 1. If
it's not the (*do_cmdtest) fails and check_channel_list() is never called. This
This function is also called by the AI (*do_cmd) and the comedi core ensures
that the async command has a valid chanlist. Remove the unnecessary 'n_chan'
check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: TRIG_INT is not vaild for scan_begin_src

The (*do_cmdtest) in this driver validated the scan_begin_src as being
TRIG_FOLLOW | TRIG_TIMER | TRIG_EXT. The TRIG_INT source is not valid.

Remove the Step 2 mutual compatibility check that makes sure that TRIG_INT
is only used for the start_src or the scan_begin_src.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Fix return flow

Simplify function return flow. Issue found
with coccinelle.

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: update MODULE_DESCRIPTION

Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: fix cb_pcidas_ao_nofifo_insn_write()

The comedi core expects (*insn_write) functions to write insn->n
data values to the hardware. Fix this function to work like the
core expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: fix cb_pcidas_ao_fifo_insn_write()

The comedi core expects (*insn_write) functions to write insn->n
data values to the hardware. Fix this function to work like the
core expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: remove superfluous comment

The ao (*cancel) function does not need commented.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: absorb cal_enable_bits()

This inline function just returns the bits needd to enable
a calibration source. For aethetics, absorb it into the callers.
Sorten the variable name in the private data used to hold the
current calibration source.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: consolidate interrupt clear code

The analog output and analog input interrupts are currently cleared
as they are handled. Refactor the code to gather all the bits needed
to clear the interrupts and do it once at the end of the interrupt
handler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: split ai code out of interrupt handler

Clarify the interrupt handler by splitting the analog input handling
into a new function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: make ni_tio_has_gate2_registers return boolean

This patch makes ni_tio_has_gate2_registers return boolean, since
this function only uses either one or zero as its return value.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Use module_pci_driver

Use module_pci_driver for drivers whose init and exit functions only
register and unregister, respectively.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Add device ID for Sitecom WLA2100

This adds the USB ID for the Sitecom WLA2100. The Windows 10 inf file
was checked to verify that the addition is correct.

Reported-by: Frans van de Wiel <fvdw@fvdw.eu>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Frans van de Wiel <fvdw@fvdw.eu>
Cc: Stable <stable@vger.kernel.org> [All stable versions]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove space after cast

This patch fixes the checkpatch check:

CHECK: No space is necessary after a cast

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Fix comparison to NULL warning

Change comparison to NULL to a ! operation.
Found using checkpatch.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove extra blank lines.

This patch fixes the checkpatch.pl check:

CHECK: Please don't use multiple blank lines

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove blank line before } and after {

Remove blank line after { and before }.
Problem found using checkpatch.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Replace udelay, mdelay functions with usleep_range

This patch fixes the checkpatch.pl check:

CHECK: usleep_range is preferred over udelay.

Replace mdelay with usleep_range function too.
Add 1 millisecond to the delay time to get a
reasonable upper limit which saves one wakeup call.
Do same throughout the file.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: make XGIfb_has_VB return boolean

This patch makes XGIfb_has_VB return boolean, since this function
only uses either one or zero as its return value.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

<smpl>

@timer@
expression e1,e2,e3,fn_ptr;
@@
-init_timer(&e1);
+setup_timer(&e1, fn_ptr, e2);
... when != fn_ptr = e3
-e1.function = fn_ptr;
-e1.data = e2;

</smpl>

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove comparison to NULL

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: use preferred kzalloc parameters

This patch uses the preferred call to kzalloc. It replaces
kzalloc(sizeof(struct aim_fh)...) by kzalloc(sizeof(*fh)...).

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: use preferred kernel types

This patch makes use of the preferred kernel types such as u16, u32.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix logical operator position

This patch puts logical continuations on the previous line to meet
coding style.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove unnecessary parentheses

This patch simply removes unnecessary parentheses.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: use blank line after declarations

This patch fixes style violation regarding blank lines after
function/struct/union/enum declarations.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: use braces on all arms of statement

This patch fixes style issues regarding braces on all arms of a statement.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: make alignment match open parenthesis

This patch fixes coding style violations by making alignments match
open parenthesis.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove multiple assignment

This patch removes multiple assignments as specified in coding style.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: removed redundant code

This patch removes redundant code.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: put spaces around operator

This patch puts spaces around the asterisk operator. It is needed to
prevent checkpatch from reporting an issue.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove multiple blank lines

This patch removes the usage of multiple blank lines from driver modules.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: IB/ipath: remove sched.h header

sched.h header in ipath_*.c is now unnecessary, since I have added
sched.h in ipath_kernel.h. So remove it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: IB/ipath: use TASK_COMM_LEN in ipath_portdata

Use comm[TASK_COMM_LEN] instead of comm[16] in ipath_kernel.h.
And add sched.h header in it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use direct call to hw_sm750_output_setMode

The proc_setMode method in lynx_output always uses the same
implementation and there is no point to use redirection rather than
direct function call.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace lynx_crtc methods with function calls

The methods in lynx_crtc always use the same implementation and there is
no point to use redirection rather than direct function call.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused methods from lynx_share

The suspend and resume methods in lynx_share are not implemented and
never set. Remove them.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>