perf/x86/rapl: fix AMD event handling

[ Upstream commit 0036fb00a756a2f6e360d44e2e3d2200a8afbc9b ]

The RAPL events exposed under /sys/devices/power/events should only reflect
what the underlying hardware actually support. This is how it works on Intel
RAPL and Intel core/uncore PMUs in general.
But on AMD, this was not the case. All possible RAPL events were advertised.

This is what it showed on an AMD Fam17h:
$ ls /sys/devices/power/events/
energy-cores        energy-gpu          energy-pkg          energy-psys
energy-ram          energy-cores.scale  energy-gpu.scale    energy-pkg.scale
energy-psys.scale   energy-ram.scale    energy-cores.unit   energy-gpu.unit
energy-pkg.unit     energy-psys.unit    energy-ram.unit

Yet, on AMD Fam17h, only energy-pkg is supported.

This patch fixes the problem. Given the way perf_msr_probe() works, the
amd_rapl_msrs[] table has to have all entries filled out and in particular
the group field, otherwise perf_msr_probe() defaults to making the event
visible.

With the patch applied, the kernel now only shows was is actually supported:

$ ls /sys/devices/power/events/
energy-pkg  energy-pkg.scale  energy-pkg.unit

The patch also uses the RAPL_MSR_MASK because only the 32-bits LSB of the
RAPL counters are relevant when reading power consumption.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220105185659.643355-1-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/realtek-rtl: Service all pending interrupts

[ Upstream commit 960dd884ddf5621ae6284cd3a42724500a97ae4c ]

Instead of only servicing the lowest pending interrupt line, make sure
all pending SoC interrupts are serviced before exiting the chained
handler. This adds a small overhead if only one interrupt is pending,
but should prevent rapid re-triggering of the handler.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()

[ Upstream commit 1a48db3fef499f615b56093947ec4b0d3d8e3021 ]

We need to use test_and_set_bit() when changing xprt state flags to
avoid potentially getting xps->xps_nactive out of sync.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change

[ Upstream commit 776d794f28c95051bc70405a7b1fa40115658a18 ]

The refcount leak issues take place in an error handling path. When the
3rd argument buf doesn't match with "offline", "online" or "remove", the
function simply returns -EINVAL and forgets to decrease the reference
count of a rpc_xprt object and a rpc_xprt_switch object increased by
rpc_sysfs_xprt_kobj_get_xprt() and
rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of
both unused objects.

Fix this issue by jumping to the error handling path labelled with
out_put when buf matches none of "offline", "online" or "remove".

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt

[ Upstream commit b8a09619a56334414cbd7f935a0796240d0cc07e ]

If the supplied argument doesn't specify the transport type, use the
type of the existing rpc clnt and its existing transport.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 handle port presence in fs_location server string

[ Upstream commit a8d54baba7c65db2d3278873def61f8d3753d766 ]

An fs_location attribute returns a string that can be ipv4, ipv6,
or DNS name. An ip location can have a port appended to it and if
no port is present a default port needs to be set. If rpc_pton()
fails to parse, try calling rpc_uaddr2socaddr() that can convert
an universal address.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 expose nfs_parse_server_name function

[ Upstream commit f5b27cc6761e27ee6387a24df1a99ca77b360fea ]

Make nfs_parse_server_name available outside of nfs4namespace.c.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1 query for fs_location attr on a new file system

[ Upstream commit 1976b2b31462151403c9fc110204fcc2a77bdfd1 ]

Query the server for other possible trunkable locations for a given
file system on a 4.1+ mount.

v2:
-- added missing static to nfs4_discover_trunking,
reported by the kernel test robot

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 store server support for fs_location attribute

[ Upstream commit 8a59bb93b7e3cca389af44781a429ac12ac49be6 ]

Define and store if server returns it supports fs_locations attribute
as a capability.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 remove zero number of fs_locations entries error check

[ Upstream commit 90e12a3191040bd3854d3e236c35921e4e92a044 ]

Remove the check for the zero length fs_locations reply in the
xdr decoding, and instead check for that in the migration code.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: Fix uninitialised variable in devicenotify

[ Upstream commit b05bf5c63b326ce1da84ef42498d8e0e292e694c ]

When decode_devicenotify_args() exits with no entries, we need to
ensure that the struct cb_devicenotifyargs is initialised to
{ 0, NULL } in order to avoid problems in
nfs4_callback_devicenotify().

Reported-by: <rtm@csail.mit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: nfs4clinet: check the return value of kstrdup()

[ Upstream commit fbd2057e5329d3502a27491190237b6be52a1cb6 ]

kstrdup() returns NULL when some internal memory errors happen, it is
better to check the return value of it so to catch the memory error in
time.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4 only print the label when its queried

[ Upstream commit 2c52c8376db7160a1dd8a681c61c9258405ef143 ]

When the bitmask of the attributes doesn't include the security label,
don't bother printing it. Since the label might not be null terminated,
adjust the printing format accordingly.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: change nfs_access_get_cached to only report the mask

[ Upstream commit b5e7b59c3480f355910f9d2c6ece5857922a5e54 ]

Currently the nfs_access_get_cached family of functions report a
'struct nfs_access_entry' as the result, with both .mask and .cred set.
However the .cred is never used.  This is probably good and there is no
guarantee that it won't be freed before use.

Change to only report the 'mask' - as this is all that is used or needed.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Propagate is_signed to expression

commit 097f1eefedeab528cecbd35586dfe293853ffb17 upstream.

During expression parsing, a new expression field is created which
should inherit the properties of the operands, such as size and
is_signed.

is_signed propagation was missing, causing spurious errors with signed
operands.  Add it in parse_expr() and parse_unary() to fix the problem.

Link: https://lkml.kernel.org/r/f4dac08742fd7a0920bf80a73c6c44042f5eaa40.1643319703.git.zanussi@kernel.org
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Reported-by: Yordan Karadzhov <ykaradzhov@vmware.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215513
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x: Fix RFIM mailbox write commands

commit 2685c77b80a80c57e2a25a726b82fb31e6e212ab upstream.

The existing mail mechanism only supports writing of workload types.

However, mailbox command for RFIM (cmd = 0x08) also requires write
operation which is ignored. This results in failing to store RFI
restriction.

Fixint this requires enhancing mailbox writes for non workload
commands too, so remove the check for MBOX_CMD_WORKLOAD_TYPE_WRITE
in mailbox write to allow this other write commands to be supoorted.

At the same time, however, we have to make sure that there is no
impact on read commands, by avoiding to write anything into the
mailbox data register.

To properly implement that, add two separate functions for mbox read
and write commands for the processor thermal workload command type.
This helps to distinguish the read and write workload command types
from each other while sending mbox commands.

Fixes: 5d6fbc96bd36 ("thermal/drivers/int340x: processor_thermal: Export additional attributes")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: int340x: Limit Kconfig to 64-bit

commit 994a04a20b03128838ec0250a0e266aab24d23f1 upstream.

32-bit processors cannot generally access 64-bit MMIO registers
atomically, and it is unknown in which order the two halves of
this registers would need to be read:

drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c: In function 'send_mbox_cmd':
drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c:79:37: error: implicit declaration of function 'readq'; did you mean 'readl'? [-Werror=implicit-function-declaration]
   79 |                         *cmd_resp = readq((void __iomem *) (proc_priv->mmio_base + MBOX_OFFSET_DATA));
      |                                     ^~~~~
      |                                     readl

The driver already does not build for anything other than x86,
so limit it further to x86-64.

Fixes: aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses

commit aeb58c860dc516794fdf7ff89d96ead2644d5889 upstream.

Some of the RFIM mail box command returns 64 bit values. So enhance
mailbox interface to return 64 bit values and use them for RFIM
commands.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 5d6fbc96bd36 ("thermal/drivers/int340x: processor_thermal: Export additional attributes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume

commit c4fcf1ada4ae63e0aab6afd19ca2e7d16833302c upstream.

When the driver resumes, the tcc offset is set back to its previous
value. But this only works if the value was user defined as otherwise
the offset isn't saved. This asymmetric logic is harder to maintain and
introduced some issues.

Improve the logic by saving the tcc offset in a suspend op, so the right
value is always restored after a resume.

Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210909085613.5577-3-atenart@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix the behavior of READ near OFFSET_MAX

commit 0cb4d23ae08c48f6bf3c29a8e5c4a74b8388b960 upstream.

Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.

The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.

Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.

Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.

Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix offset type in I/O trace points

commit 6a4d333d540041d244b2fca29b8417bfde20af81 upstream.

NFSv3 and NFSv4 use u64 offset values on the wire. Record these values
verbatim without the implicit type case to loff_t.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Clamp WRITE offsets

commit 6260d9a56ab352b54891ec66ab0eced57d55abc6 upstream.

Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix ia_size underflow

commit e6faac3f58c7c4176b66f63def17a34232a17b0e upstream.

iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.

Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes

commit a648fdeb7c0e17177a2280344d015dba3fbe3314 upstream.

iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.

Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().

Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix initialisation of nfs_client cl_flags field

commit 468d126dab45718feeb728319be20bd869a5eaa7 upstream.

For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().

Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()")
Cc: stable@vger.kernel.org # 4.8.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

commit aec12836e7196e4d360b2cbf20cf7aa5139ad2ec upstream.

When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.

Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs

commit fe4f57bf7b585dca58f1496c4e2481ecbae18126 upstream.

It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.

Cc: stable@vger.kernel.org
Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: fix error path in isotp_sendmsg() to unlock wait queue

commit 8375dfac4f683e1b2c5956d919d36aeedad46699 upstream.

Commit 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.

Fixes: 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()")
Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: fix potential CAN frame reception race in isotp_rcv()

commit 7c759040c1dd03954f650f147ae7175476d51314 upstream.

When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.

Ziyang Xuan writes:

The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().

=======================================================
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0
RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113
Call Trace:
 <TASK>
 skb_over_panic net/core/skbuff.c:118 [inline]
 skb_put.cold+0x24/0x24 net/core/skbuff.c:1990
 isotp_rcv_cf net/can/isotp.c:570 [inline]
 isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668
 deliver net/can/af_can.c:574 [inline]
 can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635
 can_receive+0x31d/0x580 net/can/af_can.c:665
 can_rcv+0x120/0x1c0 net/can/af_can.c:696
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579

Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/linux-can/d7e69278-d741-c706-65e1-e87623d9a8e8@huawei.com/T/
Link: https://lore.kernel.org/all/20220208200026.13783-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com
Reported-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Wait for command setting 'Power Off Notification' bit to complete

commit 379f56c24e698f14242f532b1d0a0f1747725e08 upstream.

SD card is allowed to signal busy on DAT0 up to 1s after the
CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host
waits until busy of CMD49 is released and only then polls Power
Management Status register up to 1s until the card indicates ready to
power off.

Without waiting for busy before polling status register sometimes card
becomes unresponsive and system fails to suspend:

  [  205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  [  206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command
  [  206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed
  [  206.421347] mmc0: error -110 reading status reg of PM func
  [  206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110
  [  206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110
  [  206.437064] PM: Some devices failed to suspend, or early wake event detected

Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 2c5d42769038 ("mmc: core: Add support for Power Off Notification for SD cards")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: Check for error num after setting mask

commit 40c67c291a93f8846c4a972c9ef1b7ba4544c8d0 upstream.

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
And since the sdhci_setup_host() has already checked the return value of
the enable_dma, we need not check it in sdhci_resume_host() again.

Fixes: 5552d7ad596c ("mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220112083156.1124782-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Do not print policy rule with inactive LSM labels

commit 89677197ae709eb1ab3646952c44f6a171c9e74c upstream.

Before printing a policy rule scan for inactive LSM labels in the policy
rule. Inactive LSM labels are identified by args_p != NULL and
rule == NULL.

Fixes: 483ec26eed42 ("ima: ima/lsm policy rule loading logic bug fixes")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: Christian Brauner <brauner@kernel.org>
[zohar@linux.ibm.com: Updated "Fixes" tag]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Allow template selection with ima_template[_fmt]= after ima_hash=

commit bb8e52e4906f148c2faf6656b5106cf7233e9301 upstream.

Commit c2426d2ad5027 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.

Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.

Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.

Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.

Reported-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Fixes: c2426d2ad5027 ("ima: added support for new kernel cmdline parameter ima_template_fmt")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Remove ima_policy file before directory

commit f7333b9572d0559e00352a926c92f29f061b4569 upstream.

The removal of ima_dir currently fails since ima_policy still exists, so
remove the ima_policy file before removing the directory.

Fixes: 4af4662fa4a9 ("integrity: IMA policy")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: fix reference leak in asymmetric_verify()

commit 926fd9f23b27ca6587492c3f58f4c7f4cd01dad5 upstream.

Don't leak a reference to the key if its algorithm is unknown.

Fixes: 947d70597236 ("ima: Support EC keys for signature verification")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

integrity: check the return value of audit_log_start()

commit 83230351c523b04ff8a029a4bdf97d881ecb96fc upstream.

audit_log_start() returns audit_buffer pointer on success or NULL on
error, so it is better to check the return value of it.

Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.23

Link: https://lore.kernel.org/r/20220209191249.980911721@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: improve size validations for received domain records

commit 9aa422ad326634b76309e8ff342c246800621216 upstream.

The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from peer nodes to track their views of the
network topology.

This patch verifies that the number of members in a received domain
record does not exceed the limit defined by MAX_MON_DOMAIN, something
that may otherwise lead to a stack overflow.

tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where
we are reading a 32 bit message data length field into a uint16.  To
avert any risk of bit overflow, we add an extra sanity check for this in
that function.  We cannot see that happen with the current code, but
future designers being unaware of this risk, may introduce it by
allowing delivery of very large (> 64k) sk buffers from the bearer
layer.  This potential problem was identified by Eric Dumazet.

This fixes CVE-2022-0435

Reported-by: Samuel Page <samuel.page@appgate.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Samuel Page <samuel.page@appgate.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: api - Move cryptomgr soft dependency into algapi

commit c6ce9c5831cae515d375a01b97ae1778689acf19 upstream.

The soft dependency on cryptomgr is only needed in algapi because
if algapi isn't present then no algorithms can be loaded.  This
also fixes the case where api is built-in but algapi is built as
a module as the soft dependency would otherwise get lost.

Fixes: 8ab23d547f65 ("crypto: api - Add softdep on cryptomgr")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix SMB 3.11 posix extension mount failure

commit 9ca8581e79e51c57e60b3b8e3b89d816448f49fe upstream.

cifs client set 4 to DataLength of create_posix context, which mean
Mode variable of create_posix context is only available. So buffer
validation of ksmbd should check only the size of Mode except for
the size of Reserved variable.

Fixes: 8f77150c15f8 ("ksmbd: add buffer validation for SMB2_CREATE_CONTEXT")
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Steve French <smfrench@gmail.com>
Tested-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: Return error on SIDA memop on normal guest

commit 2c212e1baedcd782b2535a3f86bc491977677c0e upstream.

Refuse SIDA memops on guests which are not protected.
For normal guests, the secure instruction data address designation,
which determines the location we access, is not under control of KVM.

Fixes: 19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer)
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add Cortex-A510 CPU part definition

commit 53960faf2b731dd2f9ed6e1334634b8ba6286850 upstream.

Add the CPU Partnumbers for the new Arm designs.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

moxart: fix potential use-after-free on remove path

commit bd2db32e7c3e35bd4d9b8bbff689434a50893546 upstream.

It was reported that the mmc host structure could be accessed after it
was freed in moxart_remove(), so fix this by saving the base register of
the device and using it instead of the pointer dereference.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Xin Xiong <xiongx18@fudan.edu.cn>
Cc: Xin Tan <tanxin.ctf@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: linux-mmc@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Reported-by: whitehat002 <hackyzh002@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.22

Link: https://lore.kernel.org/r/20220207103802.280120990@linuxfoundation.org
Link: https://lore.kernel.org/r/20220207133903.595766086@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Slade Watkins <slade@sladewatkins.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: netfilter: check stateless nat udp checksum fixup

commit aad51ca71ad83273e8826d6cfdcf53c98748d1fa upstream.

Add a test that sends large udp packet (which is fragmented)
via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4'
and check that the datagram is received by peer.

On kernels without
commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")',
this will fail with:

cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root    0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)

On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: nft_concat_range: add test for reload with no element add/del

commit eda0cf1202acf1ef47f93d8f92d4839213431424 upstream.

Add a specific test for the reload issue fixed with
commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").

Add to set, then flush set content + restore without other add/remove in
the transaction.

On kernels before the fix, this test case fails:
  net,mac with reload    [FAIL]

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()

commit 9f51ce0b9e73f83bab2442b36d5e247a81bd3401 upstream.

The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'irqn', so making 'irqn' an int.

Eliminate the following coccicheck warning:
./drivers/gpio/gpio-mpc8xxx.c:391:5-21: WARNING: Unsigned expression
compared with zero: mpc8xxx_gc -> irqn < 0

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 0b39536cc699 ("gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: idt3243x: Fix an ignored error return from platform_get_irq()

commit 7c1cf55577782725ea2bc24687767c8fe8e57486 upstream.

The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'parent_irq', so making 'parent_irq' an int.

Eliminate the following coccicheck warning:
./drivers/gpio/gpio-idt3243x.c:167:6-16: WARNING: Unsigned expression
compared with zero: parent_irq < 0

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 30fee1d7462a ("gpio: idt3243x: Fix IRQ check in idt_gpio_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools include UAPI: Sync sound/asound.h copy with the kernel sources

commit 4f2492731ada9d702ffdfaa6ec1ff64820a1664c upstream.

Picking the changes from:

  06feec6005c9d950 ("ASoC: hdmi-codec: Fix OOB memory accesses")

Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.

To silence this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
  diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

commit 2bdfd2825c9662463371e6691b1a794e97fa36b4 upstream.

It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks().  It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.

Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.

Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY

commit 4223f86512877b04c932e7203648b37eec931731 upstream.

Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
properly control MT7530 and MT7531 switch PHYs.

A noticeable change is that the behaviour of switchport interfaces going
up-down-up-down is no longer there.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix incorrect type issue during replay_del_range

commit 8fca8a2b0a822f7936130af7299d2fd7f0a66714 upstream.

should not use fast commit log data directly, add le32_to_cpu().

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0b5b5a62b945 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range")
Cc: stable@kernel.org
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220126063146.2302-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix error handling in ext4_fc_record_modified_inode()

commit cdce59a1549190b66f8e3fe465c2b2f714b98a94 upstream.

Current code does not fully takes care of krealloc() error case, which
could lead to silent memory corruption or a kernel bug.  This patch
fixes that.

Also it cleans up some duplicated error handling logic from various
functions in fast_commit.c file.

Reported-by: luo penghao <luo.penghao@zte.com.cn>
Suggested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix error handling in ext4_restore_inline_data()

commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.

<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!

<code snip>
 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
 213                                    void *buffer, loff_t pos, unsigned int len)
 214 {
<...>
 223         BUG_ON(!EXT4_I(inode)->i_inline_off);
 224         BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)

Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: modify the logic of ext4_mb_new_blocks_simple

commit 31a074a0c62dc0d2bfb9b543142db4fe27f9e5eb upstream.

For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.

Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.

Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: prevent used blocks from being allocated during fast commit replay

commit 599ea31d13617c5484c40cdf50d88301dc351cfc upstream.

During fast commit replay procedure, we clear inode blocks bitmap in
ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate
blocks still in use.

Make ext4_fc_record_regions() also record physical disk regions used by
inodes during replay procedure. Then ext4_mb_new_blocks_simple() can
excludes these blocks in use.

Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/xgene: Fix deferred probing

commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream.

The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/altera: Fix deferred probing

commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream.

The driver overrides the error codes returned by platform_get_irq() to
-ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/perf: Default set FREEZE_ON_SMI for all

commit a01994f5e5c79d3a35e5e8cf4252c7f2147323c3 upstream.

Kyle reported that rr[0] has started to malfunction on Comet Lake and
later CPUs due to EFI starting to make use of CPL3 [1] and the PMU
event filtering not distinguishing between regular CPL3 and SMM CPL3.

Since this is a privilege violation, default disable SMM visibility
where possible.

Administrators wanting to observe SMM cycles can easily change this
using the sysfs attribute while regular users don't have access to
this file.

[0] https://rr-project.org/

[1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform"
at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the
end of page 5.

Reported-by: Kyle Huey <me@kylehuey.com>
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/pt: Fix crash with stop filters in single-range mode

commit 1d9093457b243061a9bba23543c38726e864a643 upstream.

Add a check for !buf->single before calling pt_buffer_region_size in a
place where a missing check can cause a kernel crash.

Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt:
Opportunistically use single range output mode"), which added a
support for PT single-range output mode. Since that commit if a PT
stop filter range is hit while tracing, the kernel will crash because
of a null pointer dereference in pt_handle_status due to calling
pt_buffer_region_size without a ToPA configured.

The commit which introduced single-range mode guarded almost all uses of
the ToPA buffer variables with checks of the buf->single variable, but
missed the case where tracing was stopped by the PT hardware, which
happens when execution hits a configured stop filter.

Tested that hitting a stop filter while PT recording successfully
records a trace with this patch but crashes without this patch.

Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode")
Signed-off-by: Tristan Hume <tristan@thume.ca>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf stat: Fix display of grouped aliased events

[ Upstream commit b2b1aa73ade982c175ac926a1fd34e76ad628b94 ]

An event may have a number of uncore aliases that when added to the
evlist are consecutive.

If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.

The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.

The reordering for groups breaks the assumption and so all counts are
printed.

This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.

Before:

  ```
  $ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1

   Performance counter stats for 'system wide':

  CPU0                  256,866      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 494,413      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      967      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,738      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,161      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,920      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,443      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  310,753      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,657      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,231      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,573      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  416,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 405,966      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,481      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,447      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  312,911      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 408,154      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,086      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,380      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  333,994      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,349      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,287      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,335      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  188,107      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 302,423      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      701      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,070      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  307,221      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 383,642      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,036      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,158      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  318,479      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 821,545      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,028      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,550      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  227,618      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 372,272      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      903      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  376,783      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 419,827      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,406      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,453      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  286,583      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,956      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      999      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,436      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  313,867      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,159      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,114      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 409,111      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,399      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,684      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,828      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 376,037      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,378      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,411      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  382,456      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 621,743      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,232      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,316      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 385,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,176      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,268      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  373,588      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 386,163      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,394      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,464      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  381,206      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 546,891      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,266      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,712      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  221,176      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 392,069      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      831      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  355,401      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 705,595      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,235      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,216      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  371,436      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 428,103      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,306      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,442      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  384,352      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 504,200      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,468      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,860      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  228,856      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 287,976      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      832      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,060      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  215,121      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 334,162      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      681      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,026      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,179      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 436,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,084      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,525      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  262,296      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,573      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      986      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,533      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,852      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 359,842      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,073      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,326      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  303,379      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 367,222      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,008      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,156      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  273,487      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 425,449      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      932      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,367      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  297,596      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 414,793      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,140      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,601      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,365      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 360,422      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,342      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  327,196      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 580,858      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,122      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,014      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,564      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 452,817      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,087      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,694      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  375,002      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 389,393      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,478      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,540      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,213      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 594,685      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,401      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,222      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,749,060 ns   duration_time

         1.000749060 seconds time elapsed
  ```

After:

  ```
   Performance counter stats for 'system wide':

  CPU0               20,547,434      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36              45,202,862      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                   82,001      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                 159,688      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,464,828 ns   duration_time

         1.000464828 seconds time elapsed
  ```

Fixes: 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Asaf Yaffe <asaf.yaffe@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Copy perf_event_attr::sig_data on modification

[ Upstream commit 3c25fc97f5590060464cabfa25710970ecddbc96 ]

The intent has always been that perf_event_attr::sig_data should also be
modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is
observable by user space if SIGTRAP on events is requested.

Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies
relevant breakpoint-related attributes in hw_breakpoint_copy_attr().
This misses copying perf_event_attr::sig_data.

Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a
helper to copy generic event-type-independent attributes on
modification.

Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm/arm64: rework guest entry logic

[ Upstream commit 8cfe148a7136bc60452a5c6b7ac2d9d15c36909b ]

In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state
(EQS) by calling guest_enter_irqoff(), and unmasked IRQs prior to
exiting the EQS by calling guest_exit(). As the IRQ entry code will not
wake RCU in this case, we may run the core IRQ code and IRQ handler
without RCU watching, leading to various potential problems.

Additionally, we do not inform lockdep or tracing that interrupts will
be enabled during guest execution, which caan lead to misleading traces
and warnings that interrupts have been enabled for overly-long periods.

This patch fixes these issues by using the new timing and context
entry/exit helpers to ensure that interrupts are handled during guest
vtime but with RCU watching, with a sequence:

guest_timing_enter_irqoff();

guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();

< take any pending IRQs >

guest_timing_exit_irqoff();

Since instrumentation may make use of RCU, we must also ensure that no
instrumented code is run during the EQS. I've split out the critical
section into a new kvm_arm_enter_exit_vcpu() helper which is marked
noinstr.

Fixes: 1b3d546daf85ed2b ("arm/arm64: KVM: Properly account for guest CPU time")
Reported-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Message-Id: <20220201132926.3301912-3-mark.rutland@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm: add guest_state_{enter,exit}_irqoff()

commit ef9989afda73332df566852d6e9ca695c05f10ce upstream.

When transitioning to/from guest mode, it is necessary to inform
lockdep, tracing, and RCU in a specific order, similar to the
requirements for transitions to/from user mode. Additionally, it is
necessary to perform vtime accounting for a window around running the
guest, with RCU enabled, such that timer interrupts taken from the guest
can be accounted as guest time.

Most architectures don't handle all the necessary pieces, and a have a
number of common bugs, including unsafe usage of RCU during the window
between guest_enter() and guest_exit().

On x86, this was dealt with across commits:

  87fa7f3e98a1310e ("x86/kvm: Move context tracking where it belongs")
  0642391e2139a2c1 ("x86/kvm/vmx: Add hardirq tracing to guest enter/exit")
  9fc975e9efd03e57 ("x86/kvm/svm: Add hardirq tracing on guest enter/exit")
  3ebccdf373c21d86 ("x86/kvm/vmx: Move guest enter/exit into .noinstr.text")
  135961e0a7d555fc ("x86/kvm/svm: Move guest enter/exit into .noinstr.text")
  160457140187c5fb ("KVM: x86: Defer vtime accounting 'til after IRQ handling")
  bc908e091b326467 ("KVM: x86: Consolidate guest enter/exit logic to common helpers")

... but those fixes are specific to x86, and as the resulting logic
(while correct) is split across generic helper functions and
x86-specific helper functions, it is difficult to see that the
entry/exit accounting is balanced.

This patch adds generic helpers which architectures can use to handle
guest entry/exit consistently and correctly. The guest_{enter,exit}()
helpers are split into guest_timing_{enter,exit}() to perform vtime
accounting, and guest_context_{enter,exit}() to perform the necessary
context tracking and RCU management. The existing guest_{enter,exit}()
heleprs are left as wrappers of these.

Atop this, new guest_state_enter_irqoff() and guest_state_exit_irqoff()
helpers are added to handle the ordering of lockdep, tracing, and RCU
manageent. These are inteneded to mirror exit_to_user_mode() and
enter_from_user_mode().

Subsequent patches will migrate architectures over to the new helpers,
following a sequence:

guest_timing_enter_irqoff();

guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();

< take any pending IRQs >

guest_timing_exit_irqoff();

This sequences handles all of the above correctly, and more clearly
balances the entry and exit portions, making it easier to understand.

The existing helpers are marked as deprecated, and will be removed once
all architectures have been converted.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Message-Id: <20220201132926.3301912-2-mark.rutland@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: cmos: Evaluate century appropriate

commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream.

There's limiting the year to 2069. When setting the rtc year to 2070,
reading it returns 1970. Evaluate century starting from 19 to count the
correct year.

$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00

Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte")

Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Acked-by: Eric Wong <e@80x24.org>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Separate ADP board type from TGP

commit 68defd528f94ed1cf11f49a75cc1875dccd781fa upstream.

We have the same LAN controller on different PCH's. Separate ADP board
type from a TGP which will allow for specific fixes to be applied for
ADP platforms.

Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/resolve_btfids: Do not print any commands when building silently

commit 7f3bdbc3f13146eb9d07de81ea71f551587a384b upstream.

When building with 'make -s', there is some output from resolve_btfids:

$ make -sj"$(nproc)" oldconfig prepare
  MKDIR     .../tools/bpf/resolve_btfids/libbpf/
  MKDIR     .../tools/bpf/resolve_btfids//libsubcmd
  LINK     resolve_btfids

Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.

Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: futex: Use variable MAKE instead of make

commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.

Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:

make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.

Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/exec: Remove pipe from TEST_GEN_FILES

commit 908a26e139e8cf21093acc56d8e90ddad2ad1eff upstream.

pipe named FIFO special file is being created in execveat.c to perform
some tests. Makefile doesn't need to do anything with the pipe. When it
isn't found, Makefile generates the following build error:

make: *** No rule to make target
'../tools/testing/selftests/exec/pipe', needed by 'all'.  Stop.

pipe is created and removed during test run-time.

Amended change log to add pipe remove info:
Shuah Khan <skhan@linuxfoundation.org>

Fixes: 61016db15b8e ("selftests/exec: Verify execve of non-regular files fail")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Use VM_MAP instead of VM_ALLOC for ringbuf

commit b293dcc473d22a62dc6d78de2b15e4f49515db56 upstream.

After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.

After the change, info in /proc/vmallocinfo also changes from
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmap user

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gve: fix the wrong AdminQ buffer queue index check

commit 1f84a9450d75e08af70d9e2f2d5e1c0ac0c881d2 upstream.

The 'tail' and 'head' are 'unsigned int' type free-running count, when
'head' is overflow, the 'int i (= tail) < u32 head' will be false:

Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type
to compare, it can handle the overflow correctly.

typedef uint32_t u32;

int main()
{
        u32 tail, head;
        int stail, shead;
        int i, loop;

        tail = 0xffffffff;
        head = 0x00000000;

        for (i = tail, loop = 0; i < head; i++) {
                unsigned int idx = i & 63;

                printf("+ loop %d: idx = %u\n", loop++, idx);
        }

        stail = tail;
        shead = head;
        for (i = stail, loop = 0; i < shead; i++) {
                unsigned int idx = i & 63;

                printf("- loop %d: idx = %u\n", loop++, idx);
        }

        return 0;
}

Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

commit ab451ea952fe9d7afefae55ddb28943a148247fe upstream.

From RFC 7530 Section 16.34.5:

o  The server has not recorded an unconfirmed { v, x, c, *, * } and
   has recorded a confirmed { v, x, c, *, s }.  If the principals of
   the record and of SETCLIENTID_CONFIRM do not match, the server
   returns NFS4ERR_CLID_INUSE without removing any relevant leased
   client state, and without changing recorded callback and
   callback_ident values for client { x }.

The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.

Fixes: 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream.

Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way.  Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.

[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G    B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188]  dump_stack_lvl+0x57/0x7d
[ 1391.699198]  check_preemption_disabled+0xc8/0xd0
[ 1391.699205]  bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215]  ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221]  ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229]  ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240]  bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250]  ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258]  kthread+0x364/0x420
[ 1391.699263]  ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268]  ? set_kthread_struct+0x100/0x100
[ 1391.699273]  ret_from_fork+0x22/0x30

Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.

Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com
Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: bcm2835: Fix a few error paths

commit 5297c693d8c8e08fa742e3112cf70723f7a04da2 upstream.

After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio
hogs") a few error paths would not unwind properly the registration of
gpio ranges. Correct that by assigning a single error label and goto it
whenever we encounter a fatal error.

Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: intel: fix unexpected interrupt

commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream.

ASUS Chromebook C223 with Celeron N3350 crashes sometimes during
cold booot. Inspection of the kernel log showed that it gets into
an inifite loop logging the following message:

->handle_irq():  000000009cdb51e8, handle_bad_irq+0x0/0x251
->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7
->action(): 00000
   IRQ_NOPROBE set
unexpected IRQ trap at vector 7c

The issue happens during cold boot but only if cold boot happens
at most several dozen seconds after Chromebook is powered off. For
longer intervals between power off and power on (cold boot) the issue
does not reproduce. The unexpected interrupt is sourced from INT3452
GPIO pin which is used for SD card detect. Investigation relevealed
that when the interval between power off and power on (cold boot)
is less than several dozen seconds then values of INT3452 GPIO interrupt
enable and interrupt pending registers survive power off and power
on sequence and interrupt for SD card detect pin is enabled and pending
during probe of SD controller which causes the unexpected IRQ message.
"Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc
mentions that GPIO interrupt enable and status registers default
value is 0x0.
The fix clears INT3452 GPIO interrupt enabled and interrupt pending
registers in its probe function.

Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line

commit e12963c453263d5321a2c610e98cbc731233b685 upstream.

The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer
when switching to GPIO") hadn't taken into account an update of the IRQ
flags scenario.

When updating the IRQ flags on the preconfigured line the ->irq_set_type()
is called again. In such case the sequential Rx buffer configuration
changes may trigger a falling or rising edge interrupt that may lead,
on some platforms, to an undesired event.

This may happen because each of intel_gpio_set_gpio_mode() and
__intel_gpio_set_direction() updates the pad configuration with a different
value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is
called only for the pads that are configured as an input. Due to this fact,
integrate the logic of __intel_gpio_set_direction() call into the
intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and
immediately re-enabled.

Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
Reported-by: Kane Chen <kane.chen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: Fix H616 I2S3 pin data

commit 1fd6bb5b47a65eacb063b37e6fa6df2b8fa92959 upstream.

Two bugs have sneaked in the H616 pinctrl data:
- PH9 uses the mux value of 0x3 twice (one should be 0x5 instead)
- PH8 and PH9 use the "i2s3" function name twice in each pin

For the double pin name we use the same trick we pulled for i2s0: append
the pin function to the group name to designate the special function.

Fixes: 25adc29407fb ("pinctrl: sunxi: Add support for the Allwinner H616 pin controller")
Reported-by: SASANO Takayoshi <uaa@mx5.nisiq.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220105172952.23347-1-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd938x: fix return value of mixer put function

commit bd2347fd67d8da0fa76296507cc556da0a233bcb upstream.

wcd938x_ear_pa_put_gain, wcd938x_set_swr_port and  wcd938x_set_compander
currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.

Fixes: e8ba1e05bdc01 ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: lpass-rx-macro: fix sidetone register offsets

commit fca041a3ab70a099a6d5519ecb689b6279bd04f3 upstream.

For some reason we ended up with incorrect register offfset calcuations
for sidetone. regmap clearly throw errors when accessing these incorrect
registers as these do not belong to any read/write ranges.
so fix them to point to correct register offsets.

Fixes: f3ce6f3c9a99 ("ASoC: codecs: lpass-rx-macro: add iir widgets")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: wcd938x: fix incorrect used of portid

commit c5c1546a654f613e291a7c5d6f3660fc1eb6d0c7 upstream.

Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be derived from chan_info array.
So fix this. Without this, its possible that we could corrupt
struct wcd938x_sdw_priv by accessing port_map array out of range
with channel id instead of port id.

Fixes: e8ba1e05bdc0 ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: max9759: fix underflow in speaker_gain_control_put()

commit 4c907bcd9dcd233da6707059d777ab389dcbd964 upstream.

Check for negative values of "priv->gain" to prevent an out of bounds
access.  The concern is that these might come from the user via:
  -> snd_ctl_elem_write_user()
    -> snd_ctl_elem_write()
      -> kctl->put()

Fixes: fa8d915172b8 ("ASoC: max9759: Add Amplifier Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220119123101.GA9509@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

commit f7a6021aaf02088870559f82fc13c58cda7fea1a upstream.

If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.

Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: simple-card: fix probe failure on platform component

commit a64067f4cecaaa4deed8e33d3266bc0bcc189142 upstream.

A previous change to simple-card resulted in asoc_simple_parse_dai
attempting to retrieve the dai_name for platform components, which are
unlikely to have a valid DAI name. This caused simple-card to fail to
probe when using the xlnx_formatter_pcm as the platform component, since
it does not register any DAI components.

Since the dai_name is not used for platform components, just skip trying
to retrieve it for those.

Fixes: f107294c6422 ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes

commit e958b5884725dac86d36c1e7afe5a55f31feb0b2 upstream.

This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make
buffer bytes multiple of period bytes" by Devarsh Thakkar. The same
issue exists in the mainline version of the driver. The original
patch description is as follows:

"The Xilinx Audio Formatter IP has a constraint on period
bytes to be multiple of 64. This leads to driver changing
the period size to suitable frames such that period bytes
are multiple of 64.

Now since period bytes and period size are updated but not
the buffer bytes, this may make the buffer bytes unaligned
and not multiple of period bytes.

When this happens we hear popping noise as while DMA is being
done the buffer bytes are not enough to complete DMA access
for last period of frame within the application buffer boundary.

To avoid this, align buffer bytes too as multiple of 64, and
set another constraint to always enforce number of periods as
integer. Now since, there is already a rule in alsa core
to enforce Buffer size = Number of Periods * Period Size
this automatically aligns buffer bytes as multiple of period
bytes."

Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Cc: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fsl: Add missing error handling in pcm030_fabric_probe

commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.

Add the missing platform_device_put() and platform_device_del()
before return from pcm030_fabric_probe in the error handling case.

Fixes: c912fa913446 ("ASoC: fsl: register the wm9712-codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled

commit e55a3aea418269266d84f426b3bd70794d3389c8 upstream.

dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.

Fixes: e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/overlay: Prevent divide by zero bugs in scaling

commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream.

Smatch detected a divide by zero bug in check_overlay_scaling().

    drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_height'.
    drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_width'.

Prevent this by ensuring that the dst height and width are non-zero.

Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili
(cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/kmb: Fix for build errors with Warray-bounds

commit 43f2517955875be5d96b641fba33d73097fe3cd9 upstream.

This fixes the following build error

drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable':
drivers/gpu/drm/kmb/kmb_plane.c:165:34: error: array subscript 3 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds]
  165 |                 kmb->plane_status[plane_id].ctrl =
  LCD_CTRL_GL2_ENABLE;
  |                 ~~~~~~~~~~~~~~~~~^~~~~~~~~~
  In file included from drivers/gpu/drm/kmb/kmb_plane.c:17:
  drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status'
  61 |         struct layer_status  plane_status[KMB_MAX_PLANES];
  |                                         ^~~~~~~~~~~~
  drivers/gpu/drm/kmb/kmb_plane.c:162:34: error: array subscript 2 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds]
  162 |  kmb->plane_status[plane_id].ctrl =  LCD_CTRL_GL1_ENABLE;
  |                 ~~~~~~~~~~~~~~~~~^~~~~~~~~~
  In file included from
  drivers/gpu/drm/kmb/kmb_plane.c:17:
  drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status'
  61 |         struct layer_status  plane_status[KMB_MAX_PLANES];
  |
  ^~~~~~~~~~~~

Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127194227.2213608-1-anitha.chrisanthus@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: ensure PTP time register reads are consistent

commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream.

Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.

Add logic to ensure the "seconds" and "nanoseconds" values are consistent.

Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dump gmac4 DMA registers correctly

commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream.

Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.

This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":

BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
 kasan_report+0x200/0x21c
 __asan_report_store4_noabort+0x34/0x60
 dwmac4_dump_dma_regs+0x6d4/0xb30
 stmmac_ethtool_gregs+0x110/0x204
 ethtool_get_regs+0x200/0x4b0
 dev_ethtool+0x1dac/0x3800
 dev_ioctl+0x7c0/0xb50
 sock_ioctl+0x298/0x6c4
 ...

Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macsec: Verify that send_sci is on when setting Tx sci explicitly

commit d0cfa548dbde354de986911d3913897b5448faad upstream.

When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macsec: Fix offload support for NETDEV_UNREGISTER event

commit 9cef24c8b76c1f6effe499d2f131807c90f7ce9a upstream.

Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.

Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.

Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()

commit 6449520391dfc3d2cef134f11a91251a054ff7d0 upstream.

There are two issues with runtime pm handling in stmmac_dvr_remove():

1. the mac is runtime suspended before stopping dma and rx/tx. We
need to ensure the device is properly resumed back.

2. the stmmaceth clk enable/disable isn't balanced in both exit and
error handling code path. Take the exit code path for example, when we
unbind the driver or rmmod the driver module, the mac is runtime
suspended as said above, so the stmmaceth clk is disabled, but
stmmac_dvr_remove()
  stmmac_remove_config_dt()
    clk_disable_unprepare()
CCF will complain this time. The error handling code path suffers
from the similar situtaion.

Here are kernel warnings in error handling code path on Allwinner D1
platform:

[    1.604695] ------------[ cut here ]------------
[    1.609328] bus-emac already disabled
[    1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
[    1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
[    1.627653] Hardware name: Allwinner D1 NeZha (DT)
[    1.632443] Workqueue: events_unbound deferred_probe_work_func
[    1.638286] epc : clk_core_disable+0xcc/0xec
[    1.642561]  ra : clk_core_disable+0xcc/0xec
[    1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
[    1.654054]  gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
[    1.661272]  t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
[    1.668489]  s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
[    1.675707]  a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
[    1.682924]  a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
[    1.690141]  s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
[    1.697358]  s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[    1.704577]  s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[    1.711794]  s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
[    1.719012]  t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
[    1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
[    1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
[    1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
[    1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[    1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
[    1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[    1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[    1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[    1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[    1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[    1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[    1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[    1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[    1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[    1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[    1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[    1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[    1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[    1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[    1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[    1.852054] [<ffffffff80026564>] kthread+0x124/0x160
[    1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[    1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[    1.868956] ---[ end trace 8d5c6046255f84a0 ]---
[    1.873675] ------------[ cut here ]------------
[    1.878366] bus-emac already unprepared
[    1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
[    1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G        W 5.14.0-rc4 #1
[    1.898674] Hardware name: Allwinner D1 NeZha (DT)
[    1.903464] Workqueue: events_unbound deferred_probe_work_func
[    1.909305] epc : clk_core_unprepare+0xe4/0x168
[    1.913840]  ra : clk_core_unprepare+0xe4/0x168
[    1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
[    1.925593]  gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
[    1.932811]  t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
[    1.940029]  s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
[    1.947246]  a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
[    1.954463]  a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
[    1.961680]  s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
[    1.968898]  s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[    1.976115]  s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[    1.983333]  s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
[    1.990550]  t5 : 0000000000000000 t6 : ffffffe001600002
[    1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
[    2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
[    2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
[    2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
[    2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[    2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[    2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[    2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[    2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[    2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[    2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[    2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[    2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[    2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[    2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[    2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[    2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[    2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[    2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[    2.118551] [<ffffffff80026564>] kthread+0x124/0x160
[    2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[    2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[    2.135455] ---[ end trace 8d5c6046255f84a1 ]---

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected speed request.

commit 928d6fe996f69330ded6b887baf4534c5fac7988 upstream.

Variable clk_sel_val is not initialized in the default case of the first switch statement.
In that case, the function should return immediately without any changes to the hardware.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: Forward wakeup to smc socket waitqueue after fallback

commit 341adeec9adad0874f29a0a1af35638207352a39 upstream.

When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.

After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.

The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:

 general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E     5.16.0+ #107
 RIP: 0010:__wake_up_common+0x65/0x170
 Call Trace:
  <IRQ>
  __wake_up_common_lock+0x7a/0xc0
  sock_def_readable+0x3c/0x70
  tcp_data_queue+0x4a7/0xc40
  tcp_rcv_established+0x32f/0x660
  ? sk_filter_trim_cap+0xcb/0x2e0
  tcp_v4_do_rcv+0x10b/0x260
  tcp_v4_rcv+0xd2a/0xde0
  ip_protocol_deliver_rcu+0x3b/0x1d0
  ip_local_deliver_finish+0x54/0x60
  ip_local_deliver+0x6a/0x110
  ? tcp_v4_early_demux+0xa2/0x140
  ? tcp_v4_early_demux+0x10d/0x140
  ip_sublist_rcv_finish+0x49/0x60
  ip_sublist_rcv+0x19d/0x230
  ip_list_rcv+0x13e/0x170
  __netif_receive_skb_list_core+0x1c2/0x240
  netif_receive_skb_list_internal+0x1e6/0x320
  napi_complete_done+0x11d/0x190
  mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
  __napi_poll+0x3c/0x1b0
  net_rx_action+0x27c/0x300
  __do_softirq+0x114/0x2d2
  irq_exit_rcu+0xb4/0xe0
  common_interrupt+0xba/0xe0
  </IRQ>
  <TASK>

The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.

This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries.

Fixes: 2153bd1e3d3d ("net/smc: Transfer remaining wait queue entries during fallback")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ieee802154: Return meaningful error codes from the netlink helpers

commit 79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream.

Returning -1 does not indicate anything useful.

Use a standard and meaningful error code instead.

Fixes: a26c5fd7622d ("nl802154: add support for security layer")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_reject_bridge: Fix for missing reply from prerouting

commit aeac4554eb549037ff2f719200c0a9c1c25e7eaa upstream.

Prior to commit fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff
creation helpers"), nft_reject_bridge did not assign to nskb->dev before
passing nskb on to br_forward(). The shared skbuff creation helpers
introduced in above commit do which seems to confuse br_forward() as
reject statements in prerouting hook won't emit a packet anymore.

Fix this by simply passing NULL instead of 'dev' to the helpers - they
use the pointer for just that assignment, nothing else.

Fixes: fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff creation helpers")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ieee802154: ca8210: Stop leaking skb's

commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream.

Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.

Free the skb structure upon error before returning.

Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ieee802154: mcr20a: Fix lifs/sifs periods

commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream.

These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with phy->symbol_duration in order to get these
values in microseconds.

Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ieee802154: hwsim: Ensure proper channel selection at probe time

commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream.

Drivers are expected to set the PHY current_channel and current_page
according to their default state. The hwsim driver is advertising being
configured on channel 13 by default but that is not reflected in its own
internal pib structure. In order to ensure that this driver consider the
current channel as being 13 internally, we at least need to set the
pib->channel field to 13.

Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[stefan@datenfreihafen.org: fixed assigment from page to channel]
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>