platform/kernel/linux-rpi.git
5 years agodevres: allow const resource arguments
Arnd Bergmann [Thu, 4 Jul 2019 22:14:45 +0000 (15:14 -0700)]
devres: allow const resource arguments

devm_ioremap_resource() does not currently take 'const' arguments, which
results in a warning from the first driver trying to do it anyway:

  drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
  drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
    priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
                                                   ^~~~~~~~~~~~~~~~~~~

Change the prototype to allow it, as there is no real reason not to.

Link: http://lkml.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de
Fixes: 9bb2e0452508 ("gpio: amd: Make resource struct const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/vmscan.c: prevent useless kswapd loops
Shakeel Butt [Thu, 4 Jul 2019 22:14:42 +0000 (15:14 -0700)]
mm/vmscan.c: prevent useless kswapd loops

In production we have noticed hard lockups on large machines running
large jobs due to kswaps hoarding lru lock within isolate_lru_pages when
sc->reclaim_idx is 0 which is a small zone.  The lru was couple hundred
GiBs and the condition (page_zonenum(page) > sc->reclaim_idx) in
isolate_lru_pages() was basically skipping GiBs of pages while holding
the LRU spinlock with interrupt disabled.

On further inspection, it seems like there are two issues:

(1) If kswapd on the return from balance_pgdat() could not sleep (i.e.
    node is still unbalanced), the classzone_idx is unintentionally set
    to 0 and the whole reclaim cycle of kswapd will try to reclaim only
    the lowest and smallest zone while traversing the whole memory.

(2) Fundamentally isolate_lru_pages() is really bad when the
    allocation has woken kswapd for a smaller zone on a very large machine
    running very large jobs.  It can hoard the LRU spinlock while skipping
    over 100s of GiBs of pages.

This patch only fixes (1).  (2) needs a more fundamental solution.  To
fix (1), in the kswapd context, if pgdat->kswapd_classzone_idx is
invalid use the classzone_idx of the previous kswapd loop otherwise use
the one the waker has requested.

Link: http://lkml.kernel.org/r/20190701201847.251028-1-shakeelb@google.com
Fixes: e716f2eb24de ("mm, vmscan: prevent kswapd sleeping prematurely due to mismatched classzone_idx")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agofs/userfaultfd.c: disable irqs for fault_pending and event locks
Eric Biggers [Thu, 4 Jul 2019 22:14:39 +0000 (15:14 -0700)]
fs/userfaultfd.c: disable irqs for fault_pending and event locks

When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock.

This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by
userfaultfd_ctx_read(), which in turn can be waiting for
userfaultfd_ctx::fault_pending_wqh.lock or
userfaultfd_ctx::event_wqh.lock.

But elsewhere the fault_pending_wqh and event_wqh locks are taken with
IRQs enabled.  Since the IRQ handler may take kioctx::ctx_lock, lockdep
reports that a deadlock is possible.

Fix it by always disabling IRQs when taking the fault_pending_wqh and
event_wqh locks.

Commit ae62c16e105a ("userfaultfd: disable irqs when taking the
waitqueue lock") didn't fix this because it only accounted for the
fd_wqh lock, not the other locks nested inside it.

Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org
Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com
Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com
Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/page_alloc.c: fix regression with deferred struct page init
Juergen Gross [Thu, 4 Jul 2019 22:14:36 +0000 (15:14 -0700)]
mm/page_alloc.c: fix regression with deferred struct page init

Commit 0e56acae4b4d ("mm: initialize MAX_ORDER_NR_PAGES at a time
instead of doing larger sections") is causing a regression on some
systems when the kernel is booted as Xen dom0.

The system will just hang in early boot.

Reason is an endless loop in get_page_from_freelist() in case the first
zone looked at has no free memory.  deferred_grow_zone() is always
returning true due to the following code snipplet:

  /* If the zone is empty somebody else may have cleared out the zone */
  if (!deferred_init_mem_pfn_range_in_zone(&i, zone, &spfn, &epfn,
                                           first_deferred_pfn)) {
          pgdat->first_deferred_pfn = ULONG_MAX;
          pgdat_resize_unlock(pgdat, &flags);
          return true;
  }

This in turn results in the loop as get_page_from_freelist() is assuming
forward progress can be made by doing some more struct page
initialization.

Link: http://lkml.kernel.org/r/20190620160821.4210-1-jgross@suse.com
Fixes: 0e56acae4b4d ("mm: initialize MAX_ORDER_NR_PAGES at a time instead of doing larger sections")
Signed-off-by: Juergen Gross <jgross@suse.com>
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge tag 'sound-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Thu, 4 Jul 2019 17:03:50 +0000 (02:03 +0900)]
Merge tag 'sound-5.2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Here are a collection of small fixes for:

   - A race with ASoC HD-audio registration

   - LINE6 usb-audio memory overwrite by malformed descriptor

   - FireWire MIDI handling

   - Missing cast for bit shifts in a few USB-audio quirks

   - The wrong function calls in minor OSS sequencer code paths

   - A couple of HD-audio quirks"

* tag 'sound-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: line6: Fix write on zero-sized buffer
  ALSA: hda: Fix widget_mutex incomplete protection
  ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages
  ALSA: seq: fix incorrect order of dest_client/dest_ports arguments
  ALSA: hda/realtek - Change front mic location for Lenovo M710q
  ALSA: usb-audio: fix sign unintended sign extension on left shifts
  ALSA: hda/realtek: Add quirks for several Clevo notebook barebones

5 years agoptrace: Fix ->ptracer_cred handling for PTRACE_TRACEME
Jann Horn [Thu, 4 Jul 2019 15:32:23 +0000 (17:32 +0200)]
ptrace: Fix ->ptracer_cred handling for PTRACE_TRACEME

Fix two issues:

When called for PTRACE_TRACEME, ptrace_link() would obtain an RCU
reference to the parent's objective credentials, then give that pointer
to get_cred().  However, the object lifetime rules for things like
struct cred do not permit unconditionally turning an RCU reference into
a stable reference.

PTRACE_TRACEME records the parent's credentials as if the parent was
acting as the subject, but that's not the case.  If a malicious
unprivileged child uses PTRACE_TRACEME and the parent is privileged, and
at a later point, the parent process becomes attacker-controlled
(because it drops privileges and calls execve()), the attacker ends up
with control over two processes with a privileged ptrace relationship,
which can be abused to ptrace a suid binary and obtain root privileges.

Fix both of these by always recording the credentials of the process
that is requesting the creation of the ptrace relationship:
current_cred() can't change under us, and current is the proper subject
for access control.

This change is theoretically userspace-visible, but I am not aware of
any code that it will actually break.

Fixes: 64b875f7ac8a ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge tag 'trace-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Thu, 4 Jul 2019 01:26:17 +0000 (10:26 +0900)]
Merge tag 'trace-v5.2-rc5' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes three fixes:

   - Fix a deadlock from a previous fix to keep module loading and
     function tracing text modifications from stepping on each other
     (this has a few patches to help document the issue in comments)

   - Fix a crash when the snapshot buffer gets out of sync with the main
     ring buffer

   - Fix a memory leak when reading the memory logs"

* tag 'trace-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()
  tracing/snapshot: Resize spare buffer if size changed
  tracing: Fix memory leak in tracing_err_log_open()
  ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()
  ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()

5 years agoMerge tag 'gpio-v5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux...
Linus Torvalds [Thu, 4 Jul 2019 00:59:08 +0000 (09:59 +0900)]
Merge tag 'gpio-v5.2-4' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fix from Linus Walleij:
 "A single fixup for the SPI CS gpios that regressed in the current
  kernel cycle"

* tag 'gpio-v5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio/spi: Fix spi-gpio regression on active high CS

5 years agoBluetooth: Fix faulty expression for minimum encryption key size check
Matias Karhumaa [Tue, 2 Jul 2019 14:35:09 +0000 (16:35 +0200)]
Bluetooth: Fix faulty expression for minimum encryption key size check

Fix minimum encryption key size check so that HCI_MIN_ENC_KEY_SIZE is
also allowed as stated in the comment.

This bug caused connection problems with devices having maximum
encryption key size of 7 octets (56-bit).

Fixes: 693cd8ce3f88 ("Bluetooth: Fix regression with minimum encryption key size alignment")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203997
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Wed, 3 Jul 2019 08:06:36 +0000 (16:06 +0800)]
Merge tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fix from Steve French:
 "SMB3 fix (for stable as well) for crash mishandling one of the Windows
  reparse point symlink tags"

* tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix crash querying symlinks stored as reparse-points

5 years agoMerge tag 'for-linus-20190701' of git://git.kernel.org/pub/scm/linux/kernel/git/braun...
Linus Torvalds [Wed, 3 Jul 2019 08:00:21 +0000 (16:00 +0800)]
Merge tag 'for-linus-20190701' of git://git./linux/kernel/git/brauner/linux

Pull pidfd fork() fix from Christian Brauner:
 "A single small fix for copy_process() in kernel/fork.c:

  With Al's removal of ksys_close() from cleanup paths in copy_process()
  a bug was introduced. When anon_inode_getfile() failed the cleanup was
  correctly performed but the error code was not propagated to callers
  of copy_process() causing them to operate on a nonsensical pointer.

  The fix is a simple on-liner which makes sure that a proper negative
  error code is returned from copy_process().

  syzkaller has also verified that the bug is not reproducible with this
  fix"

* tag 'for-linus-20190701' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: return proper negative error code

5 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Wed, 3 Jul 2019 07:57:30 +0000 (15:57 +0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "Fix a build failure with the LLVM linker and a module allocation
  failure when KASLR is active:

   - Fix module allocation when running with KASLR enabled

   - Fix broken build due to bug in LLVM linker (ld.lld)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/efi: Mark __efistub_stext_offset as an absolute symbol explicitly
  arm64: kaslr: keep modules inside module region when KASAN is enabled

5 years agogpio/spi: Fix spi-gpio regression on active high CS
Linus Walleij [Tue, 2 Jul 2019 19:39:59 +0000 (21:39 +0200)]
gpio/spi: Fix spi-gpio regression on active high CS

I ran into an intriguing bug caused by
commit ""spi: gpio: Don't request CS GPIO in DT use-case"
affecting all SPI GPIO devices with an active high
chip select line.

The commit switches the CS gpio handling over to the GPIO
core, which will parse and handle "cs-gpios" from the OF
node without even calling down to the driver to get the
job done.

However the GPIO core handles the standard bindings in
Documentation/devicetree/bindings/spi/spi-controller.yaml
that specifies that active high CS needs to be specified
using "spi-cs-high" in the DT node.

The code in drivers/spi/spi-gpio.c never respected this
and never tried to inspect subnodes to see if they contained
"spi-cs-high" like the gpiolib OF quirks does. Instead the
only way to get an active high CS was to tag it in the
device tree using the flags cell such as
cs-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;

This alters the quirks to not inspect the subnodes of SPI
masters on "spi-gpio" for the standard attribute "spi-cs-high",
making old device trees work as expected.

This semantic is a bit ambigous, but just allowing the
flags on the GPIO descriptor to modify polarity is what
the kernel at large mostly uses so let's encourage that.

Fixes: 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case")
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agoftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process...
Jiri Kosina [Sat, 29 Jun 2019 21:22:33 +0000 (23:22 +0200)]
ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()

ftrace_arch_code_modify_prepare() is acquiring text_mutex, while the
corresponding release is happening in ftrace_arch_code_modify_post_process().

This has already been documented in the code, but let's also make the fact
that this is intentional clear to the semantic analysis tools such as sparse.

Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1906292321170.27227@cbobk.fhfr.pm
Fixes: 39611265edc1a ("ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()")
Fixes: d5b844a2cf507 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
5 years agoALSA: line6: Fix write on zero-sized buffer
Takashi Iwai [Tue, 2 Jul 2019 18:07:21 +0000 (20:07 +0200)]
ALSA: line6: Fix write on zero-sized buffer

LINE6 drivers allocate the buffers based on the value returned from
usb_maxpacket() calls.  The manipulated device may return zero for
this, and this results in the kmalloc() with zero size (and it may
succeed) while the other part of the driver code writes the packet
data with the fixed size -- which eventually overwrites.

This patch adds a simple sanity check for the invalid buffer size for
avoiding that problem.

Reported-by: syzbot+219f00fb49874dcaea17@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda: Fix widget_mutex incomplete protection
Evan Green [Mon, 1 Jul 2019 17:30:30 +0000 (10:30 -0700)]
ALSA: hda: Fix widget_mutex incomplete protection

The widget_mutex was introduced to serialize callers to
hda_widget_sysfs_{re}init. However, its protection of the sysfs widget array
is incomplete. For example, it is acquired around the call to
hda_widget_sysfs_reinit(), which actually creates the new array, but isn't
still acquired when codec->num_nodes and codec->start_nid is updated. So
the lock ensures one thread sets up the new array at a time, but doesn't
ensure which thread's value will end up in codec->num_nodes. If a larger
num_nodes wins but a smaller array was set up, the next call to
refresh_widgets() will touch free memory as it iterates over codec->num_nodes
that aren't there.

The widget_lock really protects both the tree as well as codec->num_nodes,
start_nid, and end_nid, so make sure it's held across that update. It should
also be held during snd_hdac_get_sub_nodes(), so that a very old read from that
function doesn't end up clobbering a later update.

Fixes: ed180abba7f1 ("ALSA: hda: Fix race between creating and refreshing sysfs entries")
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages
Takashi Sakamoto [Mon, 1 Jul 2019 14:43:53 +0000 (23:43 +0900)]
ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages

In IEC 61883-6, 8 MIDI data streams are multiplexed into single
MIDI conformant data channel. The index of stream is calculated by
modulo 8 of the value of data block counter.

In fireworks, the value of data block counter in CIP header has a quirk
with firmware version v5.0.0, v5.7.3 and v5.8.0. This brings ALSA
IEC 61883-1/6 packet streaming engine to miss detection of MIDI
messages.

This commit fixes the miss detection to modify the value of data block
counter for the modulo calculation.

For maintainers, this bug exists since a commit 18f5ed365d3f ("ALSA:
fireworks/firewire-lib: add support for recent firmware quirk") in Linux
kernel v4.2. There're many changes since the commit.  This fix can be
backported to Linux kernel v4.4 or later. I tagged a base commit to the
backport for your convenience.

Besides, my work for Linux kernel v5.3 brings heavy code refactoring and
some structure members are renamed in 'sound/firewire/amdtp-stream.h'.
The content of this patch brings conflict when merging -rc tree with
this patch and the latest tree. I request maintainers to solve the
conflict to replace 'tx_first_dbc' with 'ctx_data.tx.first_dbc'.

Fixes: df075feefbd3 ("ALSA: firewire-lib: complete AM824 data block processing layer")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agofork: return proper negative error code
Christian Brauner [Mon, 1 Jul 2019 14:01:46 +0000 (16:01 +0200)]
fork: return proper negative error code

Make sure to return a proper negative error code from copy_process()
when anon_inode_getfile() fails with CLONE_PIDFD.
Otherwise _do_fork() will not detect an error and get_task_pid() will
operator on a nonsensical pointer:

R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c
R13: 00007ffc15fbb0ff R14: 00007ff07e47e9c0 R15: 0000000000000000
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 7990 Comm: syz-executor290 Not tainted 5.2.0-rc6+ #9
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:194 [inline]
RIP: 0010:get_task_pid+0xe1/0x210 kernel/pid.c:372
Code: 89 ff e8 62 27 5f 00 49 8b 07 44 89 f1 4c 8d bc c8 90 01 00 00 eb 0c
e8 0d fe 25 00 49 81 c7 38 05 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 18 00 74
08 4c 89 ff e8 31 27 5f 00 4d 8b 37 e8 f9 47 12 00
RSP: 0018:ffff88808a4a7d78 EFLAGS: 00010203
RAX: 00000000000000a7 RBX: dffffc0000000000 RCX: ffff888088180600
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88808a4a7d90 R08: ffffffff814fb3a8 R09: ffffed1015d66bf8
R10: ffffed1015d66bf8 R11: 1ffff11015d66bf7 R12: 0000000000041ffc
R13: 1ffff11011494fbc R14: 0000000000000000 R15: 000000000000053d
FS:  00007ff07e47e700(0000) GS:ffff8880aeb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b5100 CR3: 0000000094df2000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  _do_fork+0x1b9/0x5f0 kernel/fork.c:2360
  __do_sys_clone kernel/fork.c:2454 [inline]
  __se_sys_clone kernel/fork.c:2448 [inline]
  __x64_sys_clone+0xc1/0xd0 kernel/fork.c:2448
  do_syscall_64+0xfe/0x140 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Link: https://lore.kernel.org/lkml/000000000000e0dc0d058c9e7142@google.com
Reported-and-tested-by: syzbot+002e636502bc4b64eb5c@syzkaller.appspotmail.com
Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups")
Cc: Jann Horn <jannh@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
5 years agoLinux 5.2-rc7
Linus Torvalds [Sun, 30 Jun 2019 03:25:36 +0000 (11:25 +0800)]
Linux 5.2-rc7

5 years agoMerge tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Sun, 30 Jun 2019 03:20:52 +0000 (11:20 +0800)]
Merge tag 'powerpc-5.2-7' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "One fix for a regression in my commit adding KUAP (Kernel User Access
  Prevention) on Radix, which incorrectly touched the AMR in the early
  machine check handler.

  Thanks to Nicholas Piggin"

* tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/exception: Fix machine check early corrupting AMR

5 years agoMerge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 Jun 2019 03:19:17 +0000 (11:19 +0800)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull SMP fixes from Thomas Gleixner:
 "Two small changes for the cpu hotplug code:

   - Prevent out of bounds access which actually might crash the machine
     caused by a missing bounds check in the fail injection code

   - Warn about unsupported migitation mode command line arguments to
     make people aware that they typoed the paramater. Not necessarily a
     fix but quite some people tripped over that"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Fix out-of-bounds read when setting fail state
  cpu/speculation: Warn on unsupported mitigations= parameter

5 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 29 Jun 2019 11:42:30 +0000 (19:42 +0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Misc fixes all over the place:

   - might_sleep() atomicity fix in the microcode loader

   - resctrl boundary condition fix

   - APIC arithmethics bug fix for frequencies >= 4.2 GHz

   - three 5-level paging crash fixes

   - two speculation fixes

   - a perf/stacktrace fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fall back to using frame pointers for generated code
  perf/x86: Always store regs->ip in perf_callchain_kernel()
  x86/speculation: Allow guests to use SSBD even if host does not
  x86/mm: Handle physical-virtual alignment mismatch in phys_p4d_init()
  x86/boot/64: Add missing fixup_pointer() for next_early_pgt access
  x86/boot/64: Fix crash if kernel image crosses page table boundary
  x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz
  x86/resctrl: Prevent possible overrun during bitmap operations
  x86/microcode: Fix the microcode load on CPU hotplug for real

5 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 29 Jun 2019 11:39:17 +0000 (19:39 +0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Various fixes, most of them related to bugs perf fuzzing found in the
  x86 code"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/regs: Use PERF_REG_EXTENDED_MASK
  perf/x86: Remove pmu->pebs_no_xmm_regs
  perf/x86: Clean up PEBS_XMM_REGS
  perf/x86/regs: Check reserved bits
  perf/x86: Disable extended registers for non-supported PMUs
  perf/ioctl: Add check for the sample_period value
  perf/core: Fix perf_sample_regs_user() mm check

5 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 29 Jun 2019 11:36:53 +0000 (19:36 +0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:
 "Diverse irqchip driver fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix command queue pointer comparison bug
  irqchip/mips-gic: Use the correct local interrupt map registers
  irqchip/ti-sci-inta: Fix kernel crash if irq_create_fwspec_mapping fail
  irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus

5 years agoMerge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 29 Jun 2019 11:32:09 +0000 (19:32 +0800)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
 "Four fixes:
   - fix a kexec crash on arm64
   - fix a reboot crash on some Android platforms
   - future-proof the code for upcoming ACPI 6.2 changes
   - fix a build warning on x86"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efibc: Replace variable set function in notifier call
  x86/efi: fix a -Wtype-limits compilation warning
  efi/bgrt: Drop BGRT status field reserved bits check
  efi/memreserve: deal with memreserve entries in unmapped memory

5 years agoMerge tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Sat, 29 Jun 2019 11:29:45 +0000 (19:29 +0800)]
Merge tag 'pm-5.2-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
 "Avoid skipping bus-level PCI power management during system resume for
  PCIe ports left in D0 during the preceding suspend transition on
  platforms where the power states of those ports can change out of the
  PCI layer's control"

* tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: PM: Avoid skipping bus-level PM on platforms without ACPI

5 years agoMerge tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax
Linus Torvalds [Sat, 29 Jun 2019 09:14:57 +0000 (17:14 +0800)]
Merge tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax

Pull XArray fixes from Matthew Wilcox:

 - Account XArray nodes for the page cache to the appropriate cgroup
   (Johannes Weiner)

 - Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)

 - Add a test for xa_insert() (Matthew Wilcox)

* tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax:
  XArray tests: Add check_insert
  idr: Fix idr_get_next race with idr_remove
  mm: fix page cache convergence regression

5 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 29 Jun 2019 09:11:01 +0000 (17:11 +0800)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL
  mm, swap: fix THP swap out
  fork,memcg: alloc_thread_stack_node needs to set tsk->stack
  MAINTAINERS: add CLANG/LLVM BUILD SUPPORT info
  mm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warning
  mm/page_idle.c: fix oops because end_pfn is larger than max_pfn
  initramfs: fix populate_initrd_image() section mismatch
  mm/oom_kill.c: fix uninitialized oc->constraint
  mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
  mm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() fails
  signal: remove the wrong signal_pending() check in restore_user_sigmask()
  fs/binfmt_flat.c: make load_flat_shared_library() work
  mm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemask
  fs/proc/array.c: allow reporting eip/esp for all coredumping threads
  mm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual address

5 years agoMerge tag 'arc-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Linus Torvalds [Sat, 29 Jun 2019 09:05:58 +0000 (17:05 +0800)]
Merge tag 'arc-5.2-rc7' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - hsdk platform unifying apertures

 - build system CROSS_COMPILE prefix

* tag 'arc-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: unify memory apertures configuration
  ARC: build: Try to guess CROSS_COMPILE with cc-cross-prefix

5 years agoMerge tag 'riscv-for-v5.2/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 29 Jun 2019 09:04:21 +0000 (17:04 +0800)]
Merge tag 'riscv-for-v5.2/fixes-rc7' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
 "Minor RISC-V fixes and one defconfig update.

  The fixes have no functional impact:

   - Fix some comment text in the memory management vmalloc_fault path.

   - Fix some warnings from the DT compiler in our newly-added DT files.

   - Change the newly-added DT bindings such that SoC IP blocks with
     external I/O are marked as "disabled" by default, then enable them
     explicitly in board DT files when the devices are used on the
     board. This aligns the bindings with existing upstream practice.

   - Add the MIT license as an option for a minor header file, at the
     request of one of the U-Boot maintainers.

  The RISC-V defconfig update builds the SiFive SPI driver and the
  MMC-SPI driver by default. The intention here is to make v5.2 more
  usable for testers and users with RISC-V hardware"

* tag 'riscv-for-v5.2/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: mm: Fix code comment
  dt-bindings: clock: sifive: add MIT license as an option for the header file
  dt-bindings: riscv: resolve 'make dt_binding_check' warnings
  riscv: dts: Re-organize the DT nodes
  RISC-V: defconfig: enable MMC & SPI for RISC-V

5 years agoMerge tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs
Linus Torvalds [Sat, 29 Jun 2019 09:02:22 +0000 (17:02 +0800)]
Merge tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull two more NFS client fixes from Anna Schumaker:
 "These are both stable fixes.

  One to calculate the correct client message length in the case of
  partial transmissions. And the other to set the proper TCP timeout for
  flexfiles"

* tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O
  SUNRPC: Fix up calculation of client message length

5 years agoMerge tag 'ceph-for-5.2-rc7' of git://github.com/ceph/ceph-client
Linus Torvalds [Sat, 29 Jun 2019 09:01:02 +0000 (17:01 +0800)]
Merge tag 'ceph-for-5.2-rc7' of git://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
 "A small fix for a potential -rc1 regression from Jeff"

* tag 'ceph-for-5.2-rc7' of git://github.com/ceph/ceph-client:
  ceph: fix ceph_mdsc_build_path to not stop on first component

5 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 29 Jun 2019 08:59:45 +0000 (16:59 +0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
 "One simple fix for a driver use after free"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()

5 years agoMerge tag 'for-linus-20190628' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 29 Jun 2019 08:58:35 +0000 (16:58 +0800)]
Merge tag 'for-linus-20190628' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Just two small fixes.

  One from Paolo, fixing a silly mistake in BFQ. The other one is from
  me, ensuring that we have ->file cleared in the io_uring request a bit
  earlier. That avoids a use-before-free, if we encounter an error
  before ->file is assigned"

* tag 'for-linus-20190628' of git://git.kernel.dk/linux-block:
  block, bfq: fix operator in BFQQ_TOTALLY_SEEKY
  io_uring: ensure req->file is cleared on allocation

5 years agoMerge tag 'pinctrl-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Sat, 29 Jun 2019 08:51:10 +0000 (16:51 +0800)]
Merge tag 'pinctrl-v5.2-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Sorry to bomb in fixes this late. Maybe I can comfort you by saying it
  is only driver fixes, and mostly IRQ handling which is something GPIO
  and pin control drivers never get right. You think it works and then
  it doesn't.

  Summary:

   - Fix IRQ setup in the MCP23s08.

   - Fix pin setup on pins > 31 in the Ocelot driver.

   - Fix IRQs in the Mediatek driver"

* tag 'pinctrl-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: Update cur_mask in mask/mask ops
  pinctrl: mediatek: Ignore interrupts that are wake only during resume
  pinctrl: ocelot: fix pinmuxing for pins after 31
  pinctrl: ocelot: fix gpio direction for pins after 31
  pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order

5 years agolinux/kernel.h: fix overflow for DIV_ROUND_UP_ULL
Vinod Koul [Fri, 28 Jun 2019 19:07:21 +0000 (12:07 -0700)]
linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL

DIV_ROUND_UP_ULL adds the two arguments and then invokes
DIV_ROUND_DOWN_ULL.  But on a 32bit system the addition of two 32 bit
values can overflow.  DIV_ROUND_DOWN_ULL does it correctly and stashes
the addition into a unsigned long long so cast the result to unsigned
long long here to avoid the overflow condition.

[akpm@linux-foundation.org: DIV_ROUND_UP_ULL must be an rval]
Link: http://lkml.kernel.org/r/20190625100518.30753-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm, swap: fix THP swap out
Huang Ying [Fri, 28 Jun 2019 19:07:18 +0000 (12:07 -0700)]
mm, swap: fix THP swap out

0-Day test system reported some OOM regressions for several THP
(Transparent Huge Page) swap test cases.  These regressions are bisected
to 6861428921b5 ("block: always define BIO_MAX_PAGES as 256").  In the
commit, BIO_MAX_PAGES is set to 256 even when THP swap is enabled.  So the
bio_alloc(gfp_flags, 512) in get_swap_bio() may fail when swapping out
THP.  That causes the OOM.

As in the patch description of 6861428921b5 ("block: always define
BIO_MAX_PAGES as 256"), THP swap should use multi-page bvec to write THP
to swap space.  So the issue is fixed via doing that in get_swap_bio().

BTW: I remember I have checked the THP swap code when 6861428921b5
("block: always define BIO_MAX_PAGES as 256") was merged, and thought the
THP swap code needn't to be changed.  But apparently, I was wrong.  I
should have done this at that time.

Link: http://lkml.kernel.org/r/20190624075515.31040-1-ying.huang@intel.com
Fixes: 6861428921b5 ("block: always define BIO_MAX_PAGES as 256")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agofork,memcg: alloc_thread_stack_node needs to set tsk->stack
Andrea Arcangeli [Fri, 28 Jun 2019 19:07:14 +0000 (12:07 -0700)]
fork,memcg: alloc_thread_stack_node needs to set tsk->stack

Commit 5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on
memcg charge fail") corrected two instances, but there was a third
instance of this bug.

Without setting tsk->stack, if memcg_charge_kernel_stack fails, it'll
execute free_thread_stack() on a dangling pointer.

Enterprise kernels are compiled with VMAP_STACK=y so this isn't
critical, but custom VMAP_STACK=n builds should have some performance
advantage, with the drawback of risking to fail fork because compaction
didn't succeed.  So as long as VMAP_STACK=n is a supported option it's
worth fixing it upstream.

Link: http://lkml.kernel.org/r/20190619011450.28048-1-aarcange@redhat.com
Fixes: 9b6f7e163cd0 ("mm: rework memcg kernel stack accounting")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMAINTAINERS: add CLANG/LLVM BUILD SUPPORT info
Nick Desaulniers [Fri, 28 Jun 2019 19:07:12 +0000 (12:07 -0700)]
MAINTAINERS: add CLANG/LLVM BUILD SUPPORT info

Add keyword support so that our mailing list gets cc'ed for clang/llvm
patches.  We're pretty active on our mailing list so far as code review.
There are numerous Googlers like myself that are paid to support
building the Linux kernel with Clang and LLVM.

Link: http://lkml.kernel.org/r/20190620001907.255803-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warning
Arnd Bergmann [Fri, 28 Jun 2019 19:07:09 +0000 (12:07 -0700)]
mm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warning

gcc gets confused in pcpu_get_vm_areas() because there are too many
branches that affect whether 'lva' was initialized before it gets used:

  mm/vmalloc.c: In function 'pcpu_get_vm_areas':
  mm/vmalloc.c:991:4: error: 'lva' may be used uninitialized in this function [-Werror=maybe-uninitialized]
      insert_vmap_area_augment(lva, &va->rb_node,
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       &free_vmap_area_root, &free_vmap_area_list);
       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/vmalloc.c:916:20: note: 'lva' was declared here
    struct vmap_area *lva;
                      ^~~

Add an intialization to NULL, and check whether this has changed before
the first use.

[akpm@linux-foundation.org: tweak comments]
Link: http://lkml.kernel.org/r/20190618092650.2943749-1-arnd@arndb.de
Fixes: 68ad4a330433 ("mm/vmalloc.c: keep track of free blocks for vmap allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/page_idle.c: fix oops because end_pfn is larger than max_pfn
Colin Ian King [Fri, 28 Jun 2019 19:07:05 +0000 (12:07 -0700)]
mm/page_idle.c: fix oops because end_pfn is larger than max_pfn

Currently the calcuation of end_pfn can round up the pfn number to more
than the actual maximum number of pfns, causing an Oops.  Fix this by
ensuring end_pfn is never more than max_pfn.

This can be easily triggered when on systems where the end_pfn gets
rounded up to more than max_pfn using the idle-page stress-ng stress test:

sudo stress-ng --idle-page 0

  BUG: unable to handle kernel paging request at 00000000000020d8
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 11039 Comm: stress-ng-idle- Not tainted 5.0.0-5-generic #6-Ubuntu
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
  RIP: 0010:page_idle_get_page+0xc8/0x1a0
  Code: 0f b1 0a 75 7d 48 8b 03 48 89 c2 48 c1 e8 33 83 e0 07 48 c1 ea 36 48 8d 0c 40 4c 8d 24 88 49 c1 e4 07 4c 03 24 d5 00 89 c3 be <49> 8b 44 24 58 48 8d b8 80 a1 02 00 e8 07 d5 77 00 48 8b 53 08 48
  RSP: 0018:ffffafd7c672fde8 EFLAGS: 00010202
  RAX: 0000000000000005 RBX: ffffe36341fff700 RCX: 000000000000000f
  RDX: 0000000000000284 RSI: 0000000000000275 RDI: 0000000001fff700
  RBP: ffffafd7c672fe00 R08: ffffa0bc34056410 R09: 0000000000000276
  R10: ffffa0bc754e9b40 R11: ffffa0bc330f6400 R12: 0000000000002080
  R13: ffffe36341fff700 R14: 0000000000080000 R15: ffffa0bc330f6400
  FS: 00007f0ec1ea5740(0000) GS:ffffa0bc7db00000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000020d8 CR3: 0000000077d68000 CR4: 00000000000006e0
  Call Trace:
    page_idle_bitmap_write+0x8c/0x140
    sysfs_kf_bin_write+0x5c/0x70
    kernfs_fop_write+0x12e/0x1b0
    __vfs_write+0x1b/0x40
    vfs_write+0xab/0x1b0
    ksys_write+0x55/0xc0
    __x64_sys_write+0x1a/0x20
    do_syscall_64+0x5a/0x110
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: http://lkml.kernel.org/r/20190618124352.28307-1-colin.king@canonical.com
Fixes: 33c3fc71c8cf ("mm: introduce idle page tracking")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoinitramfs: fix populate_initrd_image() section mismatch
Geert Uytterhoeven [Fri, 28 Jun 2019 19:07:03 +0000 (12:07 -0700)]
initramfs: fix populate_initrd_image() section mismatch

With gcc-4.6.3:

    WARNING: vmlinux.o(.text.unlikely+0x140): Section mismatch in reference from the function populate_initrd_image() to the variable .init.ramfs.info:__initramfs_size
    The function populate_initrd_image() references
    the variable __init __initramfs_size.
    This is often because populate_initrd_image lacks a __init
    annotation or the annotation of __initramfs_size is wrong.

    WARNING: vmlinux.o(.text.unlikely+0x14c): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:unpack_to_rootfs()
    The function populate_initrd_image() references
    the function __init unpack_to_rootfs().
    This is often because populate_initrd_image lacks a __init
    annotation or the annotation of unpack_to_rootfs is wrong.

    WARNING: vmlinux.o(.text.unlikely+0x198): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:xwrite()
    The function populate_initrd_image() references
    the function __init xwrite().
    This is often because populate_initrd_image lacks a __init
    annotation or the annotation of xwrite is wrong.

Indeed, if the compiler decides not to inline populate_initrd_image(), a
warning is generated.

Fix this by adding the missing __init annotations.

Link: http://lkml.kernel.org/r/20190617074340.12779-1-geert@linux-m68k.org
Fixes: 7c184ecd262fe64f ("initramfs: factor out a helper to populate the initrd image")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/oom_kill.c: fix uninitialized oc->constraint
Yafang Shao [Fri, 28 Jun 2019 19:06:59 +0000 (12:06 -0700)]
mm/oom_kill.c: fix uninitialized oc->constraint

In dump_oom_summary() oc->constraint is used to show oom_constraint_text,
but it hasn't been set before.  So the value of it is always the default
value 0.  We should inititialize it before.

Bellow is the output when memcg oom occurs,

before this patch:
  oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=7997,uid=0

after this patch:
  oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=13681,uid=0

Link: http://lkml.kernel.org/r/1560522038-15879-1-git-send-email-laoar.shao@gmail.com
Fixes: ef8444ea01d7 ("mm, oom: reorganize the oom report in dump_header")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wind Yu <yuzhoujian@didichuxing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
Naoya Horiguchi [Fri, 28 Jun 2019 19:06:56 +0000 (12:06 -0700)]
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge

madvise(MADV_SOFT_OFFLINE) often returns -EBUSY when calling soft offline
for hugepages with overcommitting enabled.  That was caused by the
suboptimal code in current soft-offline code.  See the following part:

    ret = migrate_pages(&pagelist, new_page, NULL, MPOL_MF_MOVE_ALL,
                            MIGRATE_SYNC, MR_MEMORY_FAILURE);
    if (ret) {
            ...
    } else {
            /*
             * We set PG_hwpoison only when the migration source hugepage
             * was successfully dissolved, because otherwise hwpoisoned
             * hugepage remains on free hugepage list, then userspace will
             * find it as SIGBUS by allocation failure. That's not expected
             * in soft-offlining.
             */
            ret = dissolve_free_huge_page(page);
            if (!ret) {
                    if (set_hwpoison_free_buddy_page(page))
                            num_poisoned_pages_inc();
            }
    }
    return ret;

Here dissolve_free_huge_page() returns -EBUSY if the migration source page
was freed into buddy in migrate_pages(), but even in that case we actually
has a chance that set_hwpoison_free_buddy_page() succeeds.  So that means
current code gives up offlining too early now.

dissolve_free_huge_page() checks that a given hugepage is suitable for
dissolving, where we should return success for !PageHuge() case because
the given hugepage is considered as already dissolved.

This change also affects other callers of dissolve_free_huge_page(), which
are cleaned up together.

[n-horiguchi@ah.jp.nec.com: v3]
Link: http://lkml.kernel.org/r/1560761476-4651-3-git-send-email-n-horiguchi@ah.jp.nec.comLink:
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Chen, Jerry T <jerry.t.chen@intel.com>
Tested-by: Chen, Jerry T <jerry.t.chen@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() fails
Naoya Horiguchi [Fri, 28 Jun 2019 19:06:53 +0000 (12:06 -0700)]
mm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() fails

The pass/fail of soft offline should be judged by checking whether the
raw error page was finally contained or not (i.e.  the result of
set_hwpoison_free_buddy_page()), but current code do not work like
that.  It might lead us to misjudge the test result when
set_hwpoison_free_buddy_page() fails.

Without this fix, there are cases where madvise(MADV_SOFT_OFFLINE) may
not offline the original page and will not return an error.

Link: http://lkml.kernel.org/r/1560154686-18497-2-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Fixes: 6bc9b56433b76 ("mm: fix race on soft-offlining")
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Cc: "Chen, Jerry T" <jerry.t.chen@intel.com>
Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agosignal: remove the wrong signal_pending() check in restore_user_sigmask()
Oleg Nesterov [Fri, 28 Jun 2019 19:06:50 +0000 (12:06 -0700)]
signal: remove the wrong signal_pending() check in restore_user_sigmask()

This is the minimal fix for stable, I'll send cleanups later.

Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced
the visible change which breaks user-space: a signal temporary unblocked
by set_user_sigmask() can be delivered even if the caller returns
success or timeout.

Change restore_user_sigmask() to accept the additional "interrupted"
argument which should be used instead of signal_pending() check, and
update the callers.

Eric said:

: For clarity.  I don't think this is required by posix, or fundamentally to
: remove the races in select.  It is what linux has always done and we have
: applications who care so I agree this fix is needed.
:
: Further in any case where the semantic change that this patch rolls back
: (aka where allowing a signal to be delivered and the select like call to
: complete) would be advantage we can do as well if not better by using
: signalfd.
:
: Michael is there any chance we can get this guarantee of the linux
: implementation of pselect and friends clearly documented.  The guarantee
: that if the system call completes successfully we are guaranteed that no
: signal that is unblocked by using sigmask will be delivered?

Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com
Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Eric Wong <e@80x24.org>
Tested-by: Eric Wong <e@80x24.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agofs/binfmt_flat.c: make load_flat_shared_library() work
Jann Horn [Fri, 28 Jun 2019 19:06:46 +0000 (12:06 -0700)]
fs/binfmt_flat.c: make load_flat_shared_library() work

load_flat_shared_library() is broken: It only calls load_flat_file() if
prepare_binprm() returns zero, but prepare_binprm() returns the number of
bytes read - so this only happens if the file is empty.

Instead, call into load_flat_file() if the number of bytes read is
non-negative. (Even if the number of bytes is zero - in that case,
load_flat_file() will see nullbytes and return a nice -ENOEXEC.)

In addition, remove the code related to bprm creds and stop using
prepare_binprm() - this code is loading a library, not a main executable,
and it only actually uses the members "buf", "file" and "filename" of the
linux_binprm struct. Instead, call kernel_read() directly.

Link: http://lkml.kernel.org/r/20190524201817.16509-1-jannh@google.com
Fixes: 287980e49ffc ("remove lots of IS_ERR_VALUE abuses")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemask
zhong jiang [Fri, 28 Jun 2019 19:06:43 +0000 (12:06 -0700)]
mm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemask

mpol_rebind_nodemask() is called for MPOL_BIND and MPOL_INTERLEAVE
mempoclicies when the tasks's cpuset's mems_allowed changes.  For
policies created without MPOL_F_STATIC_NODES or MPOL_F_RELATIVE_NODES,
it works by remapping the policy's allowed nodes (stored in v.nodes)
using the previous value of mems_allowed (stored in
w.cpuset_mems_allowed) as the domain of map and the new mems_allowed
(passed as nodes) as the range of the map (see the comment of
bitmap_remap() for details).

The result of remapping is stored back as policy's nodemask in v.nodes,
and the new value of mems_allowed should be stored in
w.cpuset_mems_allowed to facilitate the next rebind, if it happens.

However, 213980c0f23b ("mm, mempolicy: simplify rebinding mempolicies
when updating cpusets") introduced a bug where the result of remapping
is stored in w.cpuset_mems_allowed instead.  Thus, a mempolicy's
allowed nodes can evolve in an unexpected way after a series of
rebinding due to cpuset mems_allowed changes, possibly binding to a
wrong node or a smaller number of nodes which may e.g.  overload them.
This patch fixes the bug so rebinding again works as intended.

[vbabka@suse.cz: new changlog]
Link: http://lkml.kernel.org/r/ef6a69c6-c052-b067-8f2c-9d615c619bb9@suse.cz
Link: http://lkml.kernel.org/r/1558768043-23184-1-git-send-email-zhongjiang@huawei.com
Fixes: 213980c0f23b ("mm, mempolicy: simplify rebinding mempolicies when updating cpusets")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agofs/proc/array.c: allow reporting eip/esp for all coredumping threads
John Ogness [Fri, 28 Jun 2019 19:06:40 +0000 (12:06 -0700)]
fs/proc/array.c: allow reporting eip/esp for all coredumping threads

0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat")
stopped reporting eip/esp and fd7d56270b52 ("fs/proc: Report eip/esp in
/prod/PID/stat for coredumping") reintroduced the feature to fix a
regression with userspace core dump handlers (such as minicoredumper).

Because PF_DUMPCORE is only set for the primary thread, this didn't fix
the original problem for secondary threads.  Allow reporting the eip/esp
for all threads by checking for PF_EXITING as well.  This is set for all
the other threads when they are killed.  coredump_wait() waits for all the
tasks to become inactive before proceeding to invoke a core dumper.

Link: http://lkml.kernel.org/r/87y32p7i7a.fsf@linutronix.de
Link: http://lkml.kernel.org/r/20190522161614.628-1-jlu@pengutronix.de
Fixes: fd7d56270b526ca3 ("fs/proc: Report eip/esp in /prod/PID/stat for coredumping")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Jan Luebbe <jlu@pengutronix.de>
Tested-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual address
Anshuman Khandual [Fri, 28 Jun 2019 19:06:37 +0000 (12:06 -0700)]
mm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual address

The presence of struct page does not guarantee linear mapping for the pfn
physical range.  Device private memory which is non-coherent is excluded
from linear mapping during devm_memremap_pages() though they will still
have struct page coverage.

Change pfn_t_to_virt() to just check for device private memory before
giving out virtual address for a given pfn.

pfn_t_to_virt() actually has no callers.  Let's fix it for the 5.2 kernel
and remove it in 5.3.

Link: http://lkml.kernel.org/r/1558089514-25067-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agotracing/snapshot: Resize spare buffer if size changed
Eiichi Tsukata [Tue, 25 Jun 2019 01:29:10 +0000 (10:29 +0900)]
tracing/snapshot: Resize spare buffer if size changed

Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.

For example:

  # cat buffer_size_kb
  7 (expanded: 1408)
  # echo 1 > events/enable
  # grep bytes per_cpu/cpu0/stats
  bytes: 1441020
  # echo 1 > snapshot             // current:1408, spare:1408
  # echo 123 > buffer_size_kb     // current:123,  spare:1408
  # echo 1 > snapshot             // current:1408, spare:123
  # grep bytes per_cpu/cpu0/stats
  bytes: 1443700
  # cat buffer_size_kb
  123                             // != current:1408

And also, a similar per-cpu case hits the following WARNING:

Reproducer:

  # echo 1 > per_cpu/cpu0/snapshot
  # echo 123 > buffer_size_kb
  # echo 1 > per_cpu/cpu0/snapshot

WARNING:

  WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380
  Modules linked in:
  CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380
  Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48
  RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093
  RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8
  RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005
  RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b
  R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000
  R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060
  FS:  00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0
  Call Trace:
   ? trace_array_printk_buf+0x140/0x140
   ? __mutex_lock_slowpath+0x10/0x10
   tracing_snapshot_write+0x4c8/0x7f0
   ? trace_printk_init_buffers+0x60/0x60
   ? selinux_file_permission+0x3b/0x540
   ? tracer_preempt_off+0x38/0x506
   ? trace_printk_init_buffers+0x60/0x60
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.

Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com
Cc: stable@vger.kernel.org
Fixes: ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
5 years agotracing: Fix memory leak in tracing_err_log_open()
Takeshi Misawa [Fri, 28 Jun 2019 10:56:40 +0000 (19:56 +0900)]
tracing: Fix memory leak in tracing_err_log_open()

When tracing_err_log_open() calls seq_open(), allocated memory is not freed.

kmemleak report:

unreferenced object 0xffff92c0781d1100 (size 128):
  comm "tail", pid 15116, jiffies 4295163855 (age 22.704s)
  hex dump (first 32 bytes):
    00 f0 08 e5 c0 92 ff ff 00 10 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000000d0687d5>] kmem_cache_alloc+0x11f/0x1e0
    [<000000003e3039a8>] seq_open+0x2f/0x90
    [<000000008dd36b7d>] tracing_err_log_open+0x67/0x140
    [<000000005a431ae2>] do_dentry_open+0x1df/0x3a0
    [<00000000a2910603>] vfs_open+0x2f/0x40
    [<0000000038b0a383>] path_openat+0x2e8/0x1690
    [<00000000fe025bda>] do_filp_open+0x9b/0x110
    [<00000000483a5091>] do_sys_open+0x1ba/0x260
    [<00000000c558b5fd>] __x64_sys_openat+0x20/0x30
    [<000000006881ec07>] do_syscall_64+0x5a/0x130
    [<00000000571c2e94>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling seq_release() in tracing_err_log_fops.release().

Link: http://lkml.kernel.org/r/20190628105640.GA1863@DESKTOP
Fixes: 8a062902be725 ("tracing: Add tracing error log")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
5 years agoftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()
Steven Rostedt (VMware) [Fri, 28 Jun 2019 01:18:19 +0000 (21:18 -0400)]
ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()

Taking the text_mutex in ftrace_arch_code_modify_prepare() is to fix a
race against module loading and live kernel patching that might try to
change the text permissions while ftrace has it as read/write. This
really needs to be documented in the code. Add a comment that does such.

Link: http://lkml.kernel.org/r/20190627211819.5a591f52@gandalf.local.home
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
5 years agoftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_...
Petr Mladek [Thu, 27 Jun 2019 08:13:34 +0000 (10:13 +0200)]
ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()

The commit 9f255b632bf12c4dd7 ("module: Fix livepatch/ftrace module text
permissions race") causes a possible deadlock between register_kprobe()
and ftrace_run_update_code() when ftrace is using stop_machine().

The existing dependency chain (in reverse order) is:

-> #1 (text_mutex){+.+.}:
       validate_chain.isra.21+0xb32/0xd70
       __lock_acquire+0x4b8/0x928
       lock_acquire+0x102/0x230
       __mutex_lock+0x88/0x908
       mutex_lock_nested+0x32/0x40
       register_kprobe+0x254/0x658
       init_kprobes+0x11a/0x168
       do_one_initcall+0x70/0x318
       kernel_init_freeable+0x456/0x508
       kernel_init+0x22/0x150
       ret_from_fork+0x30/0x34
       kernel_thread_starter+0x0/0xc

-> #0 (cpu_hotplug_lock.rw_sem){++++}:
       check_prev_add+0x90c/0xde0
       validate_chain.isra.21+0xb32/0xd70
       __lock_acquire+0x4b8/0x928
       lock_acquire+0x102/0x230
       cpus_read_lock+0x62/0xd0
       stop_machine+0x2e/0x60
       arch_ftrace_update_code+0x2e/0x40
       ftrace_run_update_code+0x40/0xa0
       ftrace_startup+0xb2/0x168
       register_ftrace_function+0x64/0x88
       klp_patch_object+0x1a2/0x290
       klp_enable_patch+0x554/0x980
       do_one_initcall+0x70/0x318
       do_init_module+0x6e/0x250
       load_module+0x1782/0x1990
       __s390x_sys_finit_module+0xaa/0xf0
       system_call+0xd8/0x2d0

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(text_mutex);
                               lock(cpu_hotplug_lock.rw_sem);
                               lock(text_mutex);
  lock(cpu_hotplug_lock.rw_sem);

It is similar problem that has been solved by the commit 2d1e38f56622b9b
("kprobes: Cure hotplug lock ordering issues"). Many locks are involved.
To be on the safe side, text_mutex must become a low level lock taken
after cpu_hotplug_lock.rw_sem.

This can't be achieved easily with the current ftrace design.
For example, arm calls set_all_modules_text_rw() already in
ftrace_arch_code_modify_prepare(), see arch/arm/kernel/ftrace.c.
This functions is called:

  + outside stop_machine() from ftrace_run_update_code()
  + without stop_machine() from ftrace_module_enable()

Fortunately, the problematic fix is needed only on x86_64. It is
the only architecture that calls set_all_modules_text_rw()
in ftrace path and supports livepatching at the same time.

Therefore it is enough to move text_mutex handling from the generic
kernel/trace/ftrace.c into arch/x86/kernel/ftrace.c:

   ftrace_arch_code_modify_prepare()
   ftrace_arch_code_modify_post_process()

This patch basically reverts the ftrace part of the problematic
commit 9f255b632bf12c4dd7 ("module: Fix livepatch/ftrace module
text permissions race"). And provides x86_64 specific-fix.

Some refactoring of the ftrace code will be needed when livepatching
is implemented for arm or nds32. These architectures call
set_all_modules_text_rw() and use stop_machine() at the same time.

Link: http://lkml.kernel.org/r/20190627081334.12793-1-pmladek@suse.com
Fixes: 9f255b632bf12c4dd7 ("module: Fix livepatch/ftrace module text permissions race")
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
[
  As reviewed by Miroslav Benes <mbenes@suse.cz>, removed return value of
  ftrace_run_update_code() as it is a void function.
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
5 years agoNFS/flexfiles: Use the correct TCP timeout for flexfiles I/O
Trond Myklebust [Tue, 25 Jun 2019 20:41:16 +0000 (16:41 -0400)]
NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O

Fix a typo where we're confusing the default TCP retrans value
(NFS_DEF_TCP_RETRANS) for the default TCP timeout value.

Fixes: 15d03055cf39f ("pNFS/flexfiles: Set reasonable default ...")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
5 years agoSUNRPC: Fix up calculation of client message length
Trond Myklebust [Mon, 24 Jun 2019 23:15:44 +0000 (19:15 -0400)]
SUNRPC: Fix up calculation of client message length

In the case where a record marker was used, xs_sendpages() needs
to return the length of the payload + record marker so that we
operate correctly in the case of a partial transmission.
When the callers check return value, they therefore need to
take into account the record marker length.

Fixes: 06b5fc3ad94e ("Merge tag 'nfs-rdma-for-5.1-1'...")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
5 years agoALSA: seq: fix incorrect order of dest_client/dest_ports arguments
Colin Ian King [Fri, 28 Jun 2019 09:54:29 +0000 (10:54 +0100)]
ALSA: seq: fix incorrect order of dest_client/dest_ports arguments

There are two occurrances of a call to snd_seq_oss_fill_addr where
the dest_client and dest_port arguments are in the wrong order. Fix
this by swapping them around.

Addresses-Coverity: ("Arguments in wrong order")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: hda/realtek - Change front mic location for Lenovo M710q
Dennis Wassenberg [Fri, 28 Jun 2019 08:54:53 +0000 (10:54 +0200)]
ALSA: hda/realtek - Change front mic location for Lenovo M710q

On M710q Lenovo ThinkCentre machine, there are two front mics,
we change the location for one of them to avoid conflicts.

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agoALSA: usb-audio: fix sign unintended sign extension on left shifts
Colin Ian King [Thu, 27 Jun 2019 16:43:08 +0000 (17:43 +0100)]
ALSA: usb-audio: fix sign unintended sign extension on left shifts

There are a couple of left shifts of unsigned 8 bit values that
first get promoted to signed ints and hence get sign extended
on the shift if the top bit of the 8 bit values are set. Fix
this by casting the 8 bit values to unsigned ints to stop the
unintentional sign extension.

Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5 years agocifs: fix crash querying symlinks stored as reparse-points
Ronnie Sahlberg [Thu, 27 Jun 2019 04:57:02 +0000 (14:57 +1000)]
cifs: fix crash querying symlinks stored as reparse-points

We never parsed/returned any data from .get_link() when the object is a windows reparse-point
containing a symlink. This results in the VFS layer oopsing accessing an uninitialized buffer:

...
[  171.407172] Call Trace:
[  171.408039]  readlink_copy+0x29/0x70
[  171.408872]  vfs_readlink+0xc1/0x1f0
[  171.409709]  ? readlink_copy+0x70/0x70
[  171.410565]  ? simple_attr_release+0x30/0x30
[  171.411446]  ? getname_flags+0x105/0x2a0
[  171.412231]  do_readlinkat+0x1b7/0x1e0
[  171.412938]  ? __ia32_compat_sys_newfstat+0x30/0x30
...

Fix this by adding code to handle these buffers and make sure we do return a valid buffer
to .get_link()

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
5 years agoMerge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 28 Jun 2019 00:50:09 +0000 (08:50 +0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes and one core framework fix

   - Do a DT/firmware lookup in clk_core_get() even when the DT index is
     a nonsensical value

   - Fix some clk data typos in the Amlogic DT headers/code

   - Avoid returning junk in the TI clk driver when an invalid clk is
     looked for

   - Fix dividers for the emac clks on Stratix10 SoCs

   - Fix default HDA rates on Tegra210 to correct distorted audio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix divider entry for the emac clocks
  clk: Do a DT parent lookup even when index < 0
  clk: tegra210: Fix default rates for HDA clocks
  clk: ti: clkctrl: Fix returning uninitialized data
  clk: meson: meson8b: fix a typo in the VPU parent names array variable
  clk: meson: fix MPLL 50M binding id typo

5 years agoMerge tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/devic...
Linus Torvalds [Fri, 28 Jun 2019 00:48:21 +0000 (08:48 +0800)]
Merge tag 'for-5.2/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix incorrect uses of kstrndup and DM logging macros in DM's early
   init code.

 - Fix DM log-writes target's handling of super block sectors so updates
   are made in order through use of completion.

 - Fix DM core's argument splitting code to avoid undefined behaviour
   reported as a side-effect of UBSAN analysis on ppc64le.

 - Fix DM verity target to limit the amount of error messages that can
   result from a corrupt block being found.

* tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: use message limit for data block corruption message
  dm table: don't copy from a NULL pointer in realloc_argv()
  dm log writes: make sure super sector log updates are written in order
  dm init: remove trailing newline from calls to DMERR() and DMINFO()
  dm init: fix incorrect uses of kstrndup()

5 years agoMerge tag 'for-linus-20190627' of gitolite.kernel.org:pub/scm/linux/kernel/git/braune...
Linus Torvalds [Fri, 28 Jun 2019 00:41:18 +0000 (08:41 +0800)]
Merge tag 'for-linus-20190627' of gitolite.pub/scm/linux/kernel/git/brauner/linux

Pull pidfd fixes from Christian Brauner:
 "Userspace tools and libraries such as strace or glibc need a cheap and
  reliable way to tell whether CLONE_PIDFD is supported. The easiest way
  is to pass an invalid fd value in the return argument, perform the
  syscall and verify the value in the return argument has been changed
  to a valid fd.

  However, if CLONE_PIDFD is specified we currently check if pidfd == 0
  and return EINVAL if not.

  The check for pidfd == 0 was originally added to enable us to abuse
  the return argument for passing additional flags along with
  CLONE_PIDFD in the future.

  However, extending legacy clone this way would be a terrible idea and
  with clone3 on the horizon and the ability to reuse CLONE_DETACHED
  with CLONE_PIDFD there's no real need for this clutch. So remove the
  pidfd == 0 check and help userspace out.

  Also, accordig to Al, anon_inode_getfd() should only be used past the
  point of no failure and ksys_close() should not be used at all since
  it is far too easy to get wrong. Al's motto being "basically, once
  it's in descriptor table, it's out of your control". So Al's patch
  switches back to what we already had in v1 of the original patchset
  and uses a anon_inode_getfile() + put_user() + fd_install() sequence
  in the success path and a fput() + put_unused_fd() in the failure
  path.

  The other two changes should be trivial"

* tag 'for-linus-20190627' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  proc: remove useless d_is_dir() check
  copy_process(): don't use ksys_close() on cleanups
  samples: make pidfd-metadata fail gracefully on older kernels
  fork: don't check parent_tidptr with CLONE_PIDFD

5 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Linus Torvalds [Fri, 28 Jun 2019 00:39:18 +0000 (08:39 +0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - fix for one corner case in HID++ protocol with respect to handling
   very long reports, from Hans de Goede

 - power management fix in Intel-ISH driver, from Hyungwoo Yang

 - use-after-free fix in Intel-ISH driver, from Dan Carpenter

 - a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
   Oleksandr Natalenko

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: fix wrong driver_data usage
  HID: multitouch: Add pointstick support for ALPS Touchpad
  HID: logitech-dj: Fix forwarding of very long HID++ reports
  HID: uclogic: Add support for Huion HS64 tablet
  HID: chicony: add another quirk for PixArt mouse
  HID: intel-ish-hid: Fix a use after free in load_fw_from_host()

5 years agoMerge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Linus Torvalds [Fri, 28 Jun 2019 00:37:04 +0000 (08:37 +0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch of fixes, nothing that stands out as risky or scary.

  Mostly DTS tweaks for a few issues:

   - GPU fixlets for Meson

   - CPU idle fix for LS1028A

   - PWM interrupt fixes for i.MX6UL

  Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
  two MAINTAINER tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
  ARM: omap2: remove incorrect __init annotation
  ARM: dts: gemini Fix up DNS-313 compatible string
  ARM: dts: Blank D-Link DIR-685 console
  arm64: defconfig: Enable FSL_EDMA driver
  arm64: dts: ls1028a: Fix CPU idle fail.
  MAINTAINERS: BCM53573: Add internal Broadcom mailing list
  MAINTAINERS: BCM2835: Add internal Broadcom mailing list
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

5 years agoMerge tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowe...
Linus Torvalds [Fri, 28 Jun 2019 00:34:12 +0000 (08:34 +0800)]
Merge tag 'afs-fixes-20190620' of git://git./linux/kernel/git/dhowells/linux-fs

Pull AFS fixes from David Howells:
 "The in-kernel AFS client has been undergoing testing on opendev.org on
  one of their mirror machines. They are using AFS to hold data that is
  then served via apache, and Ian Wienand had reported seeing oopses,
  spontaneous machine reboots and updates to volumes going missing. This
  patch series appears to have fixed the problem, very probably due to
  patch (2), but it's not 100% certain.

  (1) Fix the printing of the "vnode modified" warning to exclude checks
      on files for which we don't have a callback promise from the
      server (and so don't expect the server to tell us when it
      changes).

      Without this, for every file or directory for which we still have
      an in-core inode that gets changed on the server, we may get a
      message logged when we next look at it. This can happen in bulk
      if, for instance, someone does "vos release" to update a R/O
      volume from a R/W volume and a whole set of files are all changed
      together.

      We only really want to log a message if the file changed and the
      server didn't tell us about it or we failed to track the state
      internally.

  (2) Fix accidental corruption of either afs_vlserver struct objects or
      the the following memory locations (which could hold anything).
      The issue is caused by a union that points to two different
      structs in struct afs_call (to save space in the struct). The call
      cleanup code assumes that it can simply call the cleanup for one
      of those structs if not NULL - when it might be actually pointing
      to the other struct.

      This means that every Volume Location RPC op is going to corrupt
      something.

  (3) Fix an uninitialised spinlock. This isn't too bad, it just causes
      a one-off warning if lockdep is enabled when "vos release" is
      called, but the spinlock still behaves correctly.

  (4) Fix the setting of i_block in the inode. This causes du, for
      example, to produce incorrect results, but otherwise should not be
      dangerous to the kernel"

* tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix setting of i_blocks
  afs: Fix uninitialised spinlock afs_volume::cb_break_lock
  afs: Fix vlserver record corruption
  afs: Fix over zealous "vnode modified" warnings

5 years agoMerge tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux
Linus Torvalds [Fri, 28 Jun 2019 00:31:57 +0000 (08:31 +0800)]
Merge tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux

Pull arch/csky fixup from Guo Ren:
 "A fixup patch for rt_sigframe in signal.c"

* tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux:
  csky: Fixup libgcc unwind error

5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 28 Jun 2019 00:24:37 +0000 (08:24 +0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.

 2) Fix TX completion to be finite, from Sergej Benilov.

 3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
    Long.

 4) Double free of TX cleanup in Dirk van der Merwe.

 5) Memory leak in packet_set_ring(), from Eric Dumazet.

 6) Out of bounds read in qmi_wwan, from Bjørn Mork.

 7) Fix iif used in mcast/bcast looped back packets, from Stephen
    Suryaputra.

 8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
  af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
  sctp: change to hold sk after auth shkey is created successfully
  ipv6: fix neighbour resolution with raw socket
  ipv6: constify rt6_nexthop()
  net: dsa: microchip: Use gpiod_set_value_cansleep()
  net: aquantia: fix vlans not working over bridged network
  ipv4: reset rt_iif for recirculated mcast/bcast out pkts
  team: Always enable vlan tx offload
  net/smc: Fix error path in smc_init
  net/smc: hold conns_lock before calling smc_lgr_register_conn()
  bonding: Always enable vlan tx offload
  net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
  ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
  qmi_wwan: Fix out-of-bounds read
  tipc: check msg->req data len in tipc_nl_compat_bearer_disable
  net: macb: do not copy the mac address if NULL
  net/packet: fix memory leak in packet_set_ring()
  net/tls: fix page double free on TX cleanup
  net/sched: cbs: Fix error path of cbs_module_init
  tipc: change to use register_pernet_device
  ...

5 years agox86/unwind/orc: Fall back to using frame pointers for generated code
Josh Poimboeuf [Thu, 27 Jun 2019 00:33:55 +0000 (19:33 -0500)]
x86/unwind/orc: Fall back to using frame pointers for generated code

The ORC unwinder can't unwind through BPF JIT generated code because
there are no ORC entries associated with the code.

If an ORC entry isn't available, try to fall back to frame pointers.  If
BPF and other generated code always do frame pointer setup (even with
CONFIG_FRAME_POINTERS=n) then this will allow ORC to unwind through most
generated code despite there being no corresponding ORC entries.

Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kairui Song <kasong@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/b6f69208ddff4343d56b7bfac1fc7cfcd62689e8.1561595111.git.jpoimboe@redhat.com
5 years agoperf/x86: Always store regs->ip in perf_callchain_kernel()
Song Liu [Thu, 27 Jun 2019 00:33:52 +0000 (19:33 -0500)]
perf/x86: Always store regs->ip in perf_callchain_kernel()

The stacktrace_map_raw_tp BPF selftest is failing because the RIP saved by
perf_arch_fetch_caller_regs() isn't getting saved by perf_callchain_kernel().

This was broken by the following commit:

  d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")

With that change, when starting with non-HW regs, the unwinder starts
with the current stack frame and unwinds until it passes up the frame
which called perf_arch_fetch_caller_regs().  So regs->ip needs to be
saved deliberately.

Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kairui Song <kasong@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/3975a298fa52b506fea32666d8ff6a13467eee6d.1561595111.git.jpoimboe@redhat.com
5 years agoceph: fix ceph_mdsc_build_path to not stop on first component
Jeff Layton [Thu, 9 May 2019 11:58:38 +0000 (07:58 -0400)]
ceph: fix ceph_mdsc_build_path to not stop on first component

When ceph_mdsc_build_path is handed a positive dentry, it will return a
zero-length path string with the base set to that dentry.  This is not
what we want.  Always include at least one path component in the string.

ceph_mdsc_build_path has behaved this way for a long time but it didn't
matter until recent d_name handling rework.

Fixes: 964fff7491e4 ("ceph: use ceph_mdsc_build_path instead of clone_dentry_name")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
5 years agopinctrl: mediatek: Update cur_mask in mask/mask ops
Nicolas Boichat [Wed, 26 Jun 2019 03:54:45 +0000 (11:54 +0800)]
pinctrl: mediatek: Update cur_mask in mask/mask ops

During suspend/resume, mtk_eint_mask may be called while
wake_mask is active. For example, this happens if a wake-source
with an active interrupt handler wakes the system:
irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so
that it can be handled later on in the resume flow.

However, this may happen before mtk_eint_do_resume is called:
in this case, wake_mask is loaded, and cur_mask is restored
from an older copy, re-enabling the interrupt, and causing
an interrupt storm (especially for level interrupts).

Step by step, for a line that has both wake and interrupt enabled:
 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt
    enabled at hardware level)
 2. System suspends, resumes due to that line (at this stage EINT_EN
    == wake_mask)
 3. irq_pm_check_wakeup is called, and disables the interrupt =>
    EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1
 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so
    it reenables EINT_EN[irq] = 1 => interrupt storm as the driver
    is not yet ready to handle the interrupt.

This patch fixes the issue in step 3, by recording all mask/unmask
changes in cur_mask. This also avoids the need to read the current
mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask
function.

The interrupt will be re-enabled properly later on, sometimes after
mtk_eint_do_resume, when the driver is ready to handle it.

Fixes: 58a5e1b64bb0 ("pinctrl: mediatek: Implement wake handler and suspend resume")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agoproc: remove useless d_is_dir() check
Christian Brauner [Thu, 27 Jun 2019 09:35:14 +0000 (11:35 +0200)]
proc: remove useless d_is_dir() check

Remove the d_is_dir() check from tgid_pidfd_to_pid().

It is pointless since you should never get &proc_tgid_base_operations
for f_op on a non-directory.

Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
5 years agocopy_process(): don't use ksys_close() on cleanups
Al Viro [Thu, 27 Jun 2019 02:22:09 +0000 (22:22 -0400)]
copy_process(): don't use ksys_close() on cleanups

anon_inode_getfd() should be used *ONLY* in situations when we are
guaranteed to be past the last failure point (including copying the
descriptor number to userland, at that).  And ksys_close() should
not be used for cleanups at all.

anon_inode_getfile() is there for all nontrivial cases like that.
Just use that...

Fixes: b3e583825266 ("clone: add CLONE_PIDFD")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
5 years agocpu/hotplug: Fix out-of-bounds read when setting fail state
Eiichi Tsukata [Thu, 27 Jun 2019 02:47:32 +0000 (11:47 +0900)]
cpu/hotplug: Fix out-of-bounds read when setting fail state

Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail
can control `struct cpuhp_step *sp` address, results in the following
global-out-of-bounds read.

Reproducer:

  # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail

KASAN report:

  BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0
  Read of size 8 at addr ffffffff89734438 by task bash/1941

  CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31
  Call Trace:
   write_cpuhp_fail+0x2cd/0x2e0
   dev_attr_store+0x58/0x80
   sysfs_kf_write+0x13d/0x1a0
   kernfs_fop_write+0x2bc/0x460
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f05e4f4c970

  The buggy address belongs to the variable:
   cpu_hotplug_lock+0x98/0xa0

  Memory state around the buggy address:
   ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
   ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
  >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
                                          ^
   ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Add a sanity check for the value written from user space.

Fixes: 1db49484f21ed ("smp/hotplug: Hotplug state fail injection")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
5 years agoaf_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
Neil Horman [Tue, 25 Jun 2019 21:57:49 +0000 (17:57 -0400)]
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET

When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel.  This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).

However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.

We can fix this by converting the schedule call to a completion
mechanism.  By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.

Tested by myself and the reporter, with good results

Change Notes:

V1->V2:
Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)

V2->V3:
Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status.  Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)

Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)

V3->V4:
Willem has requested that the control flow be restored to the
previous state.  Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call.  This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed.  To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.

Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
Clean up some extra newlines (Willem de Bruijn)

Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agosctp: change to hold sk after auth shkey is created successfully
Xin Long [Mon, 24 Jun 2019 16:21:45 +0000 (00:21 +0800)]
sctp: change to hold sk after auth shkey is created successfully

Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,

Here to fix it by only holding the sk when auth shkey is created
successfully.

Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoriscv: mm: Fix code comment
ShihPo Hung [Tue, 18 Jun 2019 09:39:15 +0000 (17:39 +0800)]
riscv: mm: Fix code comment

Fix the comment since vmalloc_fault doesn't reach
flush_tlb_fix_spurious_fault.

Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
5 years agodt-bindings: clock: sifive: add MIT license as an option for the header file
Paul Walmsley [Fri, 21 Jun 2019 20:45:42 +0000 (13:45 -0700)]
dt-bindings: clock: sifive: add MIT license as an option for the header file

At Bin Meng's request, add the MIT license as an option for the SiFive
FU540 PRCI header file.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
5 years agoPCI: PM: Avoid skipping bus-level PM on platforms without ACPI
Rafael J. Wysocki [Tue, 25 Jun 2019 22:20:23 +0000 (00:20 +0200)]
PCI: PM: Avoid skipping bus-level PM on platforms without ACPI

There are platforms that do not call pm_set_suspend_via_firmware(),
so pm_suspend_via_firmware() returns 'false' on them, but the power
states of PCI devices (PCIe ports in particular) are changed as a
result of powering down core platform components during system-wide
suspend.  Thus the pm_suspend_via_firmware() checks in
pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by
commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-
idle") are not sufficient to determine that devices left in D0
during suspend will remain in D0 during resume and so the bus-level
power management can be skipped for them.

For this reason, introduce a new global suspend flag,
PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only
and replace the pm_suspend_via_firmware() checks mentioned above
with checks against this flag.

Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
5 years agoMerge branch 'ipv6-fix-neighbour-resolution-with-raw-socket'
David S. Miller [Wed, 26 Jun 2019 20:26:08 +0000 (13:26 -0700)]
Merge branch 'ipv6-fix-neighbour-resolution-with-raw-socket'

Nicolas Dichtel says:

====================
ipv6: fix neighbour resolution with raw socket

The first patch prepares the fix, it constify rt6_nexthop().
The detail of the bug is explained in the second patch.

v1 -> v2:
 - fix compilation warnings
 - split the initial patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv6: fix neighbour resolution with raw socket
Nicolas Dichtel [Mon, 24 Jun 2019 14:01:09 +0000 (16:01 +0200)]
ipv6: fix neighbour resolution with raw socket

The scenario is the following: the user uses a raw socket to send an ipv6
packet, destinated to a not-connected network, and specify a connected nh.
Here is the corresponding python script to reproduce this scenario:

 import socket
 IPPROTO_RAW = 255
 send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW)
 # scapy
 # p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest()
 # str(p)
 req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00'
 send_s.sendto(req, ('fd00:175::2', 0, 0, 0))

fd00:175::/64 is a connected route and fd00:200::fa is not a connected
host.

With this scenario, the kernel starts by sending a NS to resolve
fd00:175::2. When it receives the NA, it flushes its queue and try to send
the initial packet. But instead of sending it, it sends another NS to
resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If
the user sends again the packet, it now uses the right nh (fd00:175::2).

The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is
:: because the associated route is a connected route, thus it uses the dst
addr of the packet. Let's use rt6_nexthop() to choose the right nh.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv6: constify rt6_nexthop()
Nicolas Dichtel [Mon, 24 Jun 2019 14:01:08 +0000 (16:01 +0200)]
ipv6: constify rt6_nexthop()

There is no functional change in this patch, it only prepares the next one.

rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: dsa: microchip: Use gpiod_set_value_cansleep()
Marek Vasut [Sun, 23 Jun 2019 15:12:57 +0000 (17:12 +0200)]
net: dsa: microchip: Use gpiod_set_value_cansleep()

Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch
reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly
fine for the kernel to sleep for a bit in ksz_switch_register().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: aquantia: fix vlans not working over bridged network
Dmitry Bogdanov [Sat, 22 Jun 2019 08:46:37 +0000 (08:46 +0000)]
net: aquantia: fix vlans not working over bridged network

In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.

The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.

The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.

Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv4: reset rt_iif for recirculated mcast/bcast out pkts
Stephen Suryaputra [Wed, 26 Jun 2019 06:21:16 +0000 (02:21 -0400)]
ipv4: reset rt_iif for recirculated mcast/bcast out pkts

Multicast or broadcast egress packets have rt_iif set to the oif. These
packets might be recirculated back as input and lookup to the raw
sockets may fail because they are bound to the incoming interface
(skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function
returns rt_iif instead of skb_iif. Hence, the lookup fails.

v2: Make it non vrf specific (David Ahern). Reword the changelog to
    reflect it.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agodt-bindings: riscv: resolve 'make dt_binding_check' warnings
Paul Walmsley [Wed, 26 Jun 2019 15:19:29 +0000 (08:19 -0700)]
dt-bindings: riscv: resolve 'make dt_binding_check' warnings

Rob pointed out that one of the examples in the RISC-V 'cpus' YAML
schema results in warnings from 'make dt_binding_check'.  Fix these.

While here, make the whitespace in the second example consistent
with the first example.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org> # for fixing the dtc warnings
5 years agoriscv: dts: Re-organize the DT nodes
Yash Shah [Tue, 25 Jun 2019 09:31:31 +0000 (15:01 +0530)]
riscv: dts: Re-organize the DT nodes

As per the convention for any SOC device with external connection,
define only device DT node in SOC DTSi file with status = "disabled"
and enable device in Board DTS file with status = "okay"

Reported-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
5 years agoRISC-V: defconfig: enable MMC & SPI for RISC-V
Atish Patra [Tue, 25 Jun 2019 22:56:36 +0000 (15:56 -0700)]
RISC-V: defconfig: enable MMC & SPI for RISC-V

Currently, riscv upstream defconfig doesn't let you boot
through userspace if rootfs is on the SD card.

Let's enable MMC & SPI drivers as well so that one can boot
to the user space using default config in upstream kernel.

While here, enable automatic mounting of devtmpfs to simplify
kernel testing with minimal root filesystems. (pjw)

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: mention the DEVTMPFS_MOUNT change in the
 patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
5 years agoteam: Always enable vlan tx offload
YueHaibing [Wed, 26 Jun 2019 16:03:39 +0000 (00:03 +0800)]
team: Always enable vlan tx offload

We should rather have vlan_tci filled all the way down
to the transmitting netdevice and let it do the hw/sw
vlan implementation.

Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'smc-fixes'
David S. Miller [Wed, 26 Jun 2019 17:10:16 +0000 (10:10 -0700)]
Merge branch 'smc-fixes'

Ursula Braun says:

====================
net/smc: fixes 2019-06-26

here are 2 small smc fixes for the net tree.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/smc: Fix error path in smc_init
YueHaibing [Wed, 26 Jun 2019 15:47:50 +0000 (17:47 +0200)]
net/smc: Fix error path in smc_init

If register_pernet_subsys success in smc_init,
we should cleanup it in case any other error.

Fixes: 64e28b52c7a6 (net/smc: add pnet table namespace support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/smc: hold conns_lock before calling smc_lgr_register_conn()
Huaping Zhou [Wed, 26 Jun 2019 15:47:49 +0000 (17:47 +0200)]
net/smc: hold conns_lock before calling smc_lgr_register_conn()

After smc_lgr_create(), the newly created link group is added
to smc_lgr_list, thus is accessible from other context.
Although link group creation is serialized by
smc_create_lgr_pending, the new link group may still be accessed
concurrently. For example, if ib_device is no longer active,
smc_ib_port_event_work() will call smc_port_terminate(), which
in turn will call __smc_lgr_terminate() on every link group of
this device. So conns_lock is required here.

Signed-off-by: Huaping Zhou <zhp@smail.nju.edu.cn>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agobonding: Always enable vlan tx offload
YueHaibing [Wed, 26 Jun 2019 08:08:44 +0000 (16:08 +0800)]
bonding: Always enable vlan tx offload

We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.

Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.

This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master")
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agocpu/speculation: Warn on unsupported mitigations= parameter
Geert Uytterhoeven [Thu, 16 May 2019 07:09:35 +0000 (09:09 +0200)]
cpu/speculation: Warn on unsupported mitigations= parameter

Currently, if the user specifies an unsupported mitigation strategy on the
kernel command line, it will be ignored silently.  The code will fall back
to the default strategy, possibly leaving the system more vulnerable than
expected.

This may happen due to e.g. a simple typo, or, for a stable kernel release,
because not all mitigation strategies have been backported.

Inform the user by printing a message.

Fixes: 98af8452945c5565 ("cpu/speculation: Add 'mitigations=' cmdline option")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190516070935.22546-1-geert@linux-m68k.org
5 years agox86/speculation: Allow guests to use SSBD even if host does not
Alejandro Jimenez [Mon, 10 Jun 2019 17:20:10 +0000 (13:20 -0400)]
x86/speculation: Allow guests to use SSBD even if host does not

The bits set in x86_spec_ctrl_mask are used to calculate the guest's value
of SPEC_CTRL that is written to the MSR before VMENTRY, and control which
mitigations the guest can enable.  In the case of SSBD, unless the host has
enabled SSBD always on mode (by passing "spec_store_bypass_disable=on" in
the kernel parameters), the SSBD bit is not set in the mask and the guest
can not properly enable the SSBD always on mitigation mode.

This has been confirmed by running the SSBD PoC on a guest using the SSBD
always on mitigation mode (booted with kernel parameter
"spec_store_bypass_disable=on"), and verifying that the guest is vulnerable
unless the host is also using SSBD always on mode. In addition, the guest
OS incorrectly reports the SSB vulnerability as mitigated.

Always set the SSBD bit in x86_spec_ctrl_mask when the host CPU supports
it, allowing the guest to use SSBD whether or not the host has chosen to
enable the mitigation in any of its modes.

Fixes: be6fcb5478e9 ("x86/bugs: Rework spec_ctrl base and mask logic")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: bp@alien8.de
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1560187210-11054-1-git-send-email-alejandro.j.jimenez@oracle.com
5 years agopinctrl: mediatek: Ignore interrupts that are wake only during resume
Nicolas Boichat [Mon, 29 Apr 2019 03:55:14 +0000 (11:55 +0800)]
pinctrl: mediatek: Ignore interrupts that are wake only during resume

Before suspending, mtk-eint would set the interrupt mask to the
one in wake_mask. However, some of these interrupts may not have a
corresponding interrupt handler, or the interrupt may be disabled.

On resume, the eint irq handler would trigger nevertheless,
and irq/pm.c:irq_pm_check_wakeup would be called, which would
try to call irq_disable. However, if the interrupt is not enabled
(irqd_irq_disabled(&desc->irq_data) is true), the call does nothing,
and the interrupt is left enabled in the eint driver.

Especially for level-sensitive interrupts, this will lead to an
interrupt storm on resume.

If we detect that an interrupt is only in wake_mask, but not in
cur_mask, we can just mask it out immediately (as mtk_eint_resume
would do anyway at a later stage in the resume sequence, when
restoring cur_mask).

Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agoHID: intel-ish-hid: fix wrong driver_data usage
Hyungwoo Yang [Thu, 6 Jun 2019 04:52:27 +0000 (21:52 -0700)]
HID: intel-ish-hid: fix wrong driver_data usage

Currently, in suspend() and resume(), ishtp client drivers are using
driver_data to get "struct ishtp_cl_device" object which is set by
bus driver. It's wrong since the driver_data should not be owned bus.
driver_data should be owned by the corresponding ishtp client driver.
Due to this, some ishtp client driver like cros_ec_ishtp which uses
its driver_data to transfer its data to its child doesn't work correctly.

So this patch removes setting driver_data in bus drier and instead of
using driver_data to get "struct ishtp_cl_device", since "struct device"
is embedded in "struct ishtp_cl_device", we introduce a helper function
that returns "struct ishtp_cl_device" from "struct device".

Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
5 years agoHID: multitouch: Add pointstick support for ALPS Touchpad
Kai-Heng Feng [Fri, 14 Jun 2019 08:56:55 +0000 (16:56 +0800)]
HID: multitouch: Add pointstick support for ALPS Touchpad

There's a new ALPS touchpad/pointstick combo device that requires
MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse.

The device can be found on HP ZBook 17 G5.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
5 years agoHID: logitech-dj: Fix forwarding of very long HID++ reports
Hans de Goede [Fri, 14 Jun 2019 08:20:27 +0000 (10:20 +0200)]
HID: logitech-dj: Fix forwarding of very long HID++ reports

The HID++ spec also defines very long HID++ reports, with a reportid of
0x12. The MX5000 and MX5500 keyboards use 0x12 output reports for sending
messages to display on their buildin LCD.

Userspace (libmx5000) supports this, in order for this to work when talking
to the HID devices instantiated for the keyboard by hid-logitech-dj,
we need to properly forward these reports to the device.

This commit fixes logi_dj_ll_raw_request not forwarding these reports.

Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>