wifi: ieee80211: add helper to validate ML element type and size

The helper functions to retrieve the EML capabilities and medium
synchronization delay both assume that the type is correct. Instead of
assuming the length is correct and still checking the type, add a new
helper to check both and don't do any verification.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.1b50e7a3b3cf.I9385514d8eb6d6d3c82479a6fa732ef65313e554@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: Fix the common size calculation for reconfiguration ML

The common information length is found in the first octet of the common
information.

Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.3c7ed4817338.I42ef706cb827b4dade6e4ffbb6e7f341eaccd398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Include Multi-Link in CRC calculation

Include the Multi-Link elements found in beacon frames
in the CRC calculation, as these elements are intended
to reflect changes in the AP MLD state.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.ae8246b93d85.Ia64b45198de90ff7f70abcc997841157f148ea40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: fix regulatory disconnect with OCB/NAN

Since regulatory disconnect was added, OCB and NAN interface
types were added, which made it completely unusable for any
driver that allowed OCB/NAN. Add OCB/NAN (though NAN doesn't
do anything, we don't have any info) and also remove all the
logic that opts out, so it won't be broken again if/when new
interface types are added.

Fixes: 6e0bd6c35b02 ("cfg80211: 802.11p OCB mode handling")
Fixes: cb3b7d87652a ("cfg80211: add start / stop NAN commands")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230616222844.2794d1625a26.I8e78a3789a29e6149447b3139df724a6f1b46fc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: fix regulatory disconnect for non-MLO

The multi-link loop here broke disconnect when multi-link
operation (MLO) isn't active for a given interface, since
in that case valid_links is 0 (indicating no links, i.e.
no MLO.)

Fix this by taking that into account properly and skipping
the link only if there are valid_links in the first place.

Cc: stable@vger.kernel.org
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230616222844.eb073d650c75.I72739923ef80919889ea9b50de9e4ba4baa836ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Rename ieee80211_mle_sta_prof_size_ok()

Rename it to ieee80211_mle_basic_sta_prof_size_ok() as it
validates the size of the station profile included in
Basic Multi-Link element.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.9bdfd263974f.I7bebd26894f33716e93cc7da576ef3215e0ba727@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Add support for parsing Reconfiguration Multi Link element

Parse Reconfiguration Multi Link IE.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.6eeb6c9a4a6e.I1cb137da9b3c712fc7c7949a6dec9e314b5d7f63@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Rename multi_link

As a preparation to support Reconfiguration Multi Link
element, rename 'multi_link' and 'multi_link_len' fields
in 'struct ieee802_11_elems' to 'ml_basic' and 'ml_basic_len'.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.b11370d3066a.I34280ae3728597056a6a2f313063962206c0d581@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: use cfg80211 defragmentation helper

Use the shared functionality rather than copying it into mac80211.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.7dcbf82baade.Ic68d1f547cb75d66037abdbb0f066db20ff41ba3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: add element defragmentation helper

This is already needed within mac80211 and support is also needed by
cfg80211 to parse ML elements.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.29c3ebeed10d.I009c049289dd0162c2e858ed8b68d2875a672ed6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: drop incorrect nontransmitted BSS update code

The removed code ran for any BSS that was not included in the MBSSID
element in order to update it. However, instead of using the correct
inheritance rules, it would simply copy the elements from the
transmitting AP. The result is that we would report incorrect elements
in this case.

After some discussions, it seems that there are likely not even APs
actually using this feature. Either way, removing the code decreases
complexity and makes the cfg80211 behaviour more correct.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.cfd6d8db1f26.Ia1044902b86cd7d366400a4bfb93691b8f05d68c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: rewrite merging of inherited elements

The cfg80211_gen_new_ie function merges the IEs using inheritance rules.
Rewrite this function to fix issues around inheritance rules. In
particular, vendor elements do not require any special handling, as they
are either all inherited or overridden by the subprofile.
Also, add fragmentation handling as this may be needed in some cases.

This also changes the function to not require making a copy. The new
version could be optimized a bit by explicitly tracking which IEs have
been handled already rather than looking that up again every time.

Note that a small behavioural change is the removal of the SSID special
handling. This should be fine for the MBSSID element, as the SSID must
be included in the subelement.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.bc6152e146db.I2b5f3bc45085e1901e5b5192a674436adaf94748@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: ignore invalid TBTT info field types

The TBTT information field type must be zero. This is only changed in
the 802.11be draft specification where the value 1 is used to indicate
that only the MLD parameters are included.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.7865606ffe94.I7ff28afb875d1b4c39acd497df8490a7d3628e3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: use new inform_bss callback

Doing this simplifies the code somewhat, as iteration over the
nontransmitted BSSs is not required anymore. Also, mac80211 should
not be iterating over the nontrans_list as it should only be accessed
while the bss_lock is held.

It also simplifies parsing of the IEs somewhat, as cfg80211 already
extracts the IEs and passes them to the callback.

Note that the only user left requiring parsing a specific BSS is the
association code if a beacon is required by the hardware.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.39ebfe2f9e59.Ia012b08e0feed8ec431b666888b459f6366f7bd1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: add inform_bss op to update BSS

This new function is called from within the inform_bss(_frame)_data
functions in order for the driver to update data that it is tracking.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.8d7781b0f965.I80041183072b75c081996a1a5a230b34aff5c668@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: keep bss_lock held when informing

It is reasonable to hold bss_lock for a little bit longer after
cfg80211_bss_update is done. Right now, this does not make any big
difference, but doing so in preparation for the next patch which adds
a call to the driver.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.61701884ff0d.I3358228209eb6766202aff04d1bae0b8fdff611f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: move regulatory_hint_found_beacon to be earlier

These calls do not require any locking, so move them in preparation for
the next patches.

A minor change/bugfix is to not hint a beacon for nontransmitted BSSes

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.a5bf3558eae9.I33c7465d983c8bef19deb7a533ee475a16f91774@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: feed the link_id to cfg80211_ch_switch_started_notify

For now, fix this only in station mode. We'll need to fix
the AP mode later.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.41e662ba1d68.I8faae5acb45c58cfeeb6bc6247aedbdaf9249d32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: add consistency check for compat chandef

Add NULL check for compat variable to avoid crash in
cfg80211_chandef_compatible() if it got called with
some mixed up channel context where not all the users
compatible with each other, which shouldn't happen.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.ae0f10dfd36b.Iea98c74aeb87bf6ef49f6d0c8687bba0dbea2abd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: stop passing cbss to parser

In both of these cases (config_link, prep_channel) it is not needed
to parse the MBSSID data for a nontransmitted BSS. In the config_link
case the frame does not contain any MBSSID element and inheritance
rules are only needed for the ML STA profile. While in the
prep_channel case the IEs have already been processed by cfg80211 and
are already exploded.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.66d2605ff0ad.I7cdd1d390e7b0735c46204231a9e636d45b7f1e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Extend AID element addition for TDLS frames

Extend AID element addition in TDLS setup request and response
frames to add it when HE or EHT capabilities are supported.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.483bf44ce684.Ia2387eb24c06fa41febc213923160bedafce2085@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Add HE and EHT capa elements in TDLS frames

Add HE and EHT capabilities IE in TDLS setup request,
response, confirm and discovery response frames.

Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.c77128828b0d.Ied2d8800847c759718c2c35e8f6c0902afd6bca1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: handle TDLS data frames with MLO

If the device is associated with an AP MLD, then TDLS data frames
should have
 - A1 = peer address,
 - A2 = own MLD address (since the peer may now know about MLO), and
 - A3 = BSSID.

Change the code to do that.

Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.4bf648b63dfd.I98ef1dabd14b74a92120750f7746a7a512011701@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: handle TDLS negotiation with MLO

Userspace can now select the link to use for TDLS management
frames (indicating e.g. which BSSID should be used), use the
link_id received from cfg80211 to build the frames.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.ce1fc230b505.Ie773c5679805001f5a52680d68d9ce0232c57648@changeid
[Benjamin fixed some locking]
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
[fix sta mutex locking too]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: make TDLS management link-aware

For multi-link operation(MLO) TDLS management
frames need to be transmitted on a specific link.
The TDLS setup request will add BSSID along with
peer address and userspace will pass the link-id
based on BSSID value to the driver(or mac80211).

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: wext-core: Fix -Wstringop-overflow warning in ioctl_standard_iw_point()

-Wstringop-overflow is legitimately warning us about extra_size
pontentially being zero at some point, hence potenially ending
up _allocating_ zero bytes of memory for extra pointer and then
trying to access such object in a call to copy_from_user().

Fix this by adding a sanity check to ensure we never end up
trying to allocate zero bytes of data for extra pointer, before
continue executing the rest of the code in the function.

Address the following -Wstringop-overflow warning seen when built
m68k architecture with allyesconfig configuration:
                 from net/wireless/wext-core.c:11:
In function '_copy_from_user',
    inlined from 'copy_from_user' at include/linux/uaccess.h:183:7,
    inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:825:7:
arch/m68k/include/asm/string.h:48:25: warning: '__builtin_memset' writing 1 or more bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
   48 | #define memset(d, c, n) __builtin_memset(d, c, n)
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/uaccess.h:153:17: note: in expansion of macro 'memset'
  153 |                 memset(to + (n - res), 0, res);
      |                 ^~~~~~
In function 'kmalloc',
    inlined from 'kzalloc' at include/linux/slab.h:694:9,
    inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:819:10:
include/linux/slab.h:577:16: note: at offset 1 into destination object of size 0 allocated by '__kmalloc'
  577 |         return __kmalloc(size, flags);
      |                ^~~~~~~~~~~~~~~~~~~~~~

This help with the ongoing efforts to globally enable
-Wstringop-overflow.

Link: https://github.com/KSPP/linux/issues/315
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZItSlzvIpjdjNfd8@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 81 for AX devices

Start supporting API version 81 for AX devices.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e61fdc474d89.I3d9823231fa7fc47158b8aa3561b43822c8c86cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Add support for SCAN API version 16

Scan API version 16 use link ID for reporting the TSF of
scan results (instead of MAC ID used in previous versions).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.05bf3e612297.Ie3075f7068af38c335d26778ab7d0ec4b1c026c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Don't access vif valid links directly

And instead use the vif getter functions, as a preparation for
supporting disabled/dormant links.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.61ca688cbbf1.Ic1b4049cf156238ff16e6c57959004da911cb5c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: handle eSR transitions

There several transitions to handle in eSR mode:
* SMPS should be disabled when in eSR mode
* indicate to the fw whether the new added link should use the
  listen lmac or the main lmac
* RLC is offloaded when in eSR mode; adjust RLC command accordingly

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fix max number of fw active links

The max active links that are supported by the FW is hard coded.
This is wrong since this value is HW-dependent. Fix this by
determining according to the actual HW.

Also remove a redundant check that the number of active links
doesn't exceeds the maximum.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Remove "Missing iftype sband data/EHT cap" spam

In mesh mode, ieee80211_chandef_he_6ghz_oper() is called by
mesh_matches_local() for every received mesh beacon.

On a 6 GHz mesh of a HE-only phy, this spams that the hardware does not
have EHT capabilities, even if the received mesh beacon does not have an
EHT element.

Unlike HE, not supporting EHT in the 6 GHz band is not an error so do
not print anything in this case.

Fixes: 5dca295dd767 ("mac80211: Add initial support for EHT and 320 MHz channels")

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230614132648.28995-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: add a few rate index validity checks

Validate index before access iwl_rate_mcs to keep rate->index
inside the valid boundaries. Use MCS_0_INDEX if index is less
than MCS_0_INDEX and MCS_9_INDEX if index is greater then
MCS_9_INDEX.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.79f16b3aef32.If1137f894775d6d07b78cbf3a6163ffce6399507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Validate slots_num before allocating memory

Verify slots_num is valid in iwl_txq_alloc()

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.90be48017c1b.I880e451e137c5cd688d5f38b573b0dbf352762b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Validate tid is in valid range before using it

Validate tid is less then MAX TID when it is used to access
corresponding arrays.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.cea75e1f57e7.I03bc0a81d2c1bdbf4784c12c4c62b8538892ccba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: track u-APSD misbehaving AP by AP address

If the AP is an AP MLD, then we shouldn't track just the BSSID
but the MLD address. Just generally use ap_addr since it has
the BSSID in the non-MLD case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: implement WPFC ACPI table loading

We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).

Remove the useless hardcoded zeroes while at it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler()

rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq.

Fixes: abc599efa67b ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: add some FW misbehaviour check infrastructure

When the firmware misbehaves (according to the driver), we
often either ignore that, or WARN_ON, which is very noisy
but doesn't really help.

Add a little helper macro IWL_FW_CHECK() that can be used
in place of WARN_ON() in conditions, and make it take a
message that's printed in this case. We can also add more
behaviour to this in the future.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: always send spec link ID in link commands

The firmware technically only needs this when the link is
newly added, but it's much easier for debugging if it's
always available, so include it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: use array as array argument

When calling iwl_mvm_set_fw_qos_params() we explicitly pass
a pointer to the first array element, but the function will
treat it as an array. Simplify and clarify the code and pass
the array instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: store WMM params per link

We have the data structure set up to store the parameters
per link, but weren't using them. Fix that and store them
in the right link.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: check link during TX

Again, during some (botched) FW restart scenarios we can end
up with a NULL link in the driver but mac80211 thinking all
is still going OK. If we try to TX at the same time, we can
crash there. Fix that by checking for a NULL link during TX.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.cee48479deec.I4eef58f7b67afafb7b3294adbeb6e0067b68419d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: add a NULL pointer check

We've observed that in some botched firmware restart scenarios
when the firmware crashes again while we're reconfiguring, we
can hit NULL pointer crashes here. The underlying issue is the
botched restart which we need to fix separately, but until we
can do that, don't crash hard here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e47b0192c78f.I67fa9f07cd1c8b3bdc8db25f5e31c1c680c49745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fw: Add new FSEQ defines to fw dump

On fw error dump, dmesg prints FSEQ register data. Add 4
additional prints in order to match those being dumped
by Windows driver. Allows fw infra to correctly detect
version mismatch.

Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: pcie: double-check ACK interrupt after timeout

There are evidently cases where the firmware completes the
reset but the interrupt isn't received correctly, so check
for the interrupt again after the timeout, and don't dump
the firmware error log if the right bit is set.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.00cc2d9b88c3.I429bfe800f17c624e50c0b0c10dd2cd7d885f199@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: pull from TXQs with softirqs disabled

In mac80211, it's required that we pull from TXQs by calling
ieee80211_tx_dequeue() only with softirqs disabled. However,
in iwl_mvm_queue_state_change() we're often called with them
enabled, e.g. from flush if anything was flushed, triggering
a mac80211 warning.

Fix that by disabling the softirqs across the TX call.

Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: use iwl_mvm_is_vendor_in_approved_list()

We have this helper now instead of open-coding the check for
the dmi_tas_approved_list, so use it even here. It was added
for debugfs use, but it's better to be consistent.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fw: make some ACPI functions static

iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and
iwl_acpi_get_object() need not be exported etc., they're used
only within the same file. Make them static.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: Correctly indicate support for VHT TX STBC

If HT STBC is not supported, do not indicate support for VHT TX
STBC.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.b24b5fba6fab.I116617875eb4a9d520df23a8c49a6594f9d8b2c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: correctly access HE/EHT sband capa

We can't just dereference the sband->iftype_data pointer,
that's an array so we need to access the right entry. Use
the previously introduced helper functions to do that.

There are also cases, e.g. when loading with disable_11ax=1,
where the pointer might be NULL but we still attempt to use
it, causing a crash.

Fixes: 529281bdf0fc ("iwlwifi: mvm: limit TLC according to our HE capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Add NULL check before dereferencing the pointer

While vif pointers are protected by the corresponding "*active"
fields, static checkers can get confused sometimes. Add an explicit
check.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614154951.78749ae91fb5.Id3c05d13eeee6638f0930f750e93fb928d5c9dee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: remove new checksum code

The hardware isn't going to get fixed, so this mode cannot work
in the foreseeable future. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614145722.ddbc16c4affe.Ia6921e4b8a9624d4f57489ac775105ed0e400313@changeid
[restore original subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Add debugfs entry to report dormant links

Add debugfs entry to report dormant (valid but disabled) links.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.7fa5f022adfb.Iff6fa3e1a3b00ae726612f9d5a31f7fe2fcbfc68@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Support disabled links during association

When the association is complete, do not configure disabled
links, and track them as part of the interface data.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.c194fabeb81a.Iaefdef5ba0492afe9a5ede14c68060a4af36e444@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge wireless into wireless-next

There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ray_cs: fix stringop-truncation GCC warning

GCC 12.2 with W=1 warns:

drivers/net/wireless/legacy/ray_cs.c:630:17: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]

The driver uses SSID as a string which is just wrong, it should be treated as a
byte array instead. But as the driver is ancient and most likely there are no
users so convert it to use strscpy(). This makes sure that the string is
NUL-terminated and also the warning is fixed.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-5-kvalo@kernel.org

wifi: hostap: fix stringop-truncations GCC warning

With GCC 13.1 and W=1 hostap has a warning:

drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3633:17: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation]

fortify-string.h recommends not to use strncpy() so use strscpy() which fixes
the warning. Also now it's guarenteed that the string is NUL-terminated.

Compile tested only.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-4-kvalo@kernel.org

wifi: brcmsmac: fix gnu_printf warnings

With GCC 13.1 and W=1 brcmsmac has warnings like this:

./include/trace/stages/stage5_get_offsets.h:23:31: warning: function 'trace_event_get_offsets_brcms_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]

Add a workaround which disables -Wsuggest-attribute=format in
brcms_trace_brcmsmac_msg.h. I see similar workarounds in other drivers as well.

Compile tested only.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-3-kvalo@kernel.org

wifi: brcmfmac: fix gnu_printf warnings

With GCC 13.1 and W=1 brcmfmac has warnings like this:

./include/trace/perf.h:26:16: warning: function 'perf_trace_brcmf_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]

Add a workaround which disables -Wsuggest-attribute=format in tracepoint.h. I
see similar workarounds in other drivers as well.

Compile tested only.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-2-kvalo@kernel.org

wifi: rtw89: fix spelling typo of IQK debug messages

Fix spelling typo of IQK debug messages.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230614081555.91395-3-dmantipov@yandex.ru

wifi: rtw89: cleanup rtw89_iqk_info and related code

Drop useless '_iqk_track()' and 'rtw8852a_iqk_track()' (they
just change 'thermal_rek_en' field which is set but unused
and so removed as well) functions, set but unused 'kcount'
field of 'struct rtw89_iqk_info', and convert 'thermal' to
local variables where appropriate (it doesn't need to have
longer storage duration because it is actually used for the
debugging purposes only).

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230614081555.91395-2-dmantipov@yandex.ru

wifi: rtw89: cleanup private data structures

Remove a bunch of unused (and set but unused) fields
from 'struct rtw89_btc_wl_nhm', 'struct rtw89_dle_info',
'struct rtw89_hal' and 'struct rtw89_env_monitor_info'
driver-specific data structures, adjust related bits.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230614081555.91395-1-dmantipov@yandex.ru

wifi: mt7601u: replace strlcpy() with strscpy()

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since DEV_ASSIGN is only used by
TRACE macros and the return values are ignored.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613003458.3538812-1-azeemshaikh38@gmail.com

wifi: rt2x00: fix the typo in comments

Fix typo in the description of 'non-succesfull'.

Signed-off-by: Deming Wang <wangdeming@inspur.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230612114612.1640-1-wangdeming@inspur.com

wifi: iwlwifi: dbg-tlv: clear FW debug memory on init

When we restart the firmware, we shouldn't keep old debug data
around. Since the "allocate" function might not reallocate the
memory blocks (they're only freed when we unbind from the device),
clear the memory to have a clean slate for debug data.

This is a bit more complex since we normally don't enter into
the allocation function, but duplicating the logic didn't seem
enticing either, so rework the allocation a bit to always go
into the individual block allocation, but there clear if it's
already allocated, rather than allocating again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.30b82881cfbf.I39520aff8ac95ee64d39dc5913525a1efd7995fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: pcie: remove redundant argument

The iwl_pcie_alloc_fw_monitor_block() function has an argument
that's only ever hard-coded to 11, remove it and hard-code the
value into the function itself with a comment.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.737c153e8259.Ibe6250ca812cfa2f00ac47e5e0d1595c6b9b4875@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: pcie: clear FW debug memory on init

When we restart the firmware, we shouldn't keep old debug data
around. Since the "allocate" function might not reallocate the
memory block (it's only freed when we unbind from the device),
clear the memory to have a clean slate for debug data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.73c32255a132.Ibd7101dcd285b01ee879fddfbf52c30d49ced3c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: dbg-tlv: fix DRAM data init

Given the existing code in iwl_dbg_tlv_update_drams(), the
following can happen and cause firmware asserts, and even
the device to become unusable:

 * We set the magic so the firmware will use the data;
 * we try to fill multiple allocation IDs, with at least
   one successful, but - crucially - one failing and thus
   not touching the data;
 * we don't clear the data since there was one success.

This doesn't seem like much of a problem just yet, however,
what happens now is that the allocation ID(s) that failed
are not initialized.

There are two additional things to know:
 * we never free these allocations across FW restart or
   interface down/up etc., in fact we never free them until
   the driver is unbound from the device (e.g. unloaded)
 * the firmware uses the DRAM info structure for real debug
   data when it has used it completely

Given that, and the fact that we never initialize the data
on restart, we can be unlucky and end up with an allocation
that looks for the most part valid (valid ID, valid number
of buffers, etc.) but has bad sizes - causing the firmware
to throw an assert we can never recover from.

Fixing the code to have the entire buffers cleared (which
we should do so old debug data isn't sticking around) is a
bit more complex, so as a first step make the actual code
that fills the information more robust by clearing the
structure first, and filling the magic values only if it
actually succeeded for one, rather than doing it the other
way around.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.87cf5528f4bc.I26ac907a4162297808b33467fc7f5d8177474a34@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: allow ADD_STA not to be advertised by the firwmare

Newest firmware don't advertise the version of ADD_STA because it has
been replaced by another command. There are old firmware images
that also don't advertise it. Replace all the checks with a new
inline, and in that check for either MLD API or the ADD_STA
command version.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4b9305510223.I7cc143d87186f8441e9b8435cc550b76734c7eef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: put only a single IGTK into FW

The firmware only supports a single IGTK, and due to some
changes it really doesn't like to have multiple programmed
in later versions. Since only newer firmware cannot remove
a key that isn't present any more, adjust only the MLD API
code to keep track of the previous IGTK and remove it when
a new one is added.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.3fde1ef09270.I2e12a3b0bba4325c07dc8fcce39b711f158bd621@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: fix potential array out of bounds access

Account for IWL_SEC_WEP_KEY_OFFSET when needed while verifying
key_len size in iwl_mvm_sec_key_add().

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.f193b7493a93.I6948ba625b9318924b96a5e22602ac75d2bd0125@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: support version C0 of BZ and GL devices

Add support for C0 version of MAC and RF for BZ and GL devices.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.90ad8aab8a03.I86d1675095f0e4f5286d9b7c2b00a0220f524472@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: add support for Extra EHT LTF

Add support for Extra EHT LTF defined in 9.4.2.313
EHT Capabilities element.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.de019d7cc174.I806f0f6042b89274192701a60b4f7900822db666@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Refactor iwl_mvm_get_lmac_id()

The iwl_mvm_get_lmac_id() function is currently
defined as a static inline function under fw/api
and receives mvm's fw pointer. It will need the
ability to access other mvm struct members for
future capabilities such as debug. Move the function
out of the fw/api and into mvm proper as a regular
function and have it receive the pointer to mvm.

Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.507b2f9f64eb.I0ec91310e1911c33faf396b5e17bcb11a164f6ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: improve debug prints in iwl_read_ppag_table()

Add prints of ETSI and China bits.
Check if need to mask the China bit (when the firmware doesn't
support it) in a separate flow, so it will be easier to follow
the conditions. Add a separate message for the command version.

Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4ee455ec1ee8.I6f1a4b7dfa5cfd9b4f4a4b5bb5567849e629ae96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: initialize the rx_vec before using it

Initialize the phy_data.rx_vec for both version-3 and above
where it is 4-byte data size and below version which has
data size of 2-byte.
The data will be sent uninitialized in called function if
notification version is less than three.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.a6bb856f04bc.I9a15075f3dad61dcabdcd1ed0d34cf3e8ec5453f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: rename BTM support flag and its TLV

Currently, we only need to support BTM rejection.
However, in the future we might want to support other BTM modes.
Rephrase its naming.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.ad20f10668d1.Icbb3fbae50b2302b97225b183dd336b02a4f37ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: support U-SIG EHT validate checks

Support new firmware that can validate the validate bits in
sniffer mode, and advertise that fact and the result of the
checks in the U-SIG radiotap field.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.c20480aa1171.Icc0d077dae01d662ccb948823e196aa9c5c87976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Replace strlcpy with strscpy

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since LOCAL_ASSIGN is only used by
TRACE macros and the return values are ignored.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230613003404.3538524-1-azeemshaikh38@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: replace strlcpy() with strscpy()

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since WIPHY_ASSIGN is only used by
TRACE macros and the return values are ignored.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230612232301.2572316-1-azeemshaikh38@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Propagate ERP slot changes to FW

In AP mode, ERP slot changes weren't properly indicated to the FW.
Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.ef242b8ce245.I01eddee9d3a9a3208499c223eb8e70fe6663f42c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: FTM responder MLO support

Add a link configuration parameter to FTM responder start instead
of using the default link.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.b367f9bd19b8.I158c71998f39a6c15463ff5ae30129da8ad46d22@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: pass ESR parameters to the firmware

The firmware needs to know the esr_transtition_timeout to time the
transition between EMLSR and single radio with the AP.
Add the EMLSR support bit to the wiphy extended capabilities so that
it'll be sent in our association request frame. There are some
limitations in the implementation so we cannot use zero
padding/transition delay; fill the correct values.

Also, feed the medium_synchronization delay to the firmware.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.09fa06820d03.Ie9a9fd37d4948f8c5dd91161de254184b1a093c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: debugfs: add ppag capa to fw info file

Add information about ppag_china_bit_support capability.

Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.4655922aff4d.Ie934027940bd53d05124222aa6a8a8b7021952c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: always set MH len in offload_assist

Some versions of the new hardware don't have a functional
version of the new offload method, but still have stricter
checks on the MAC header (MH) length in the offload assist
word. Include that even if checksumming isn't offloaded to
hardware.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.bba713f7495a.Idbc8e3ce313b51af4060326e0191bd338b3163a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: fw: print PC register value instead of address

The program counter address is read from the TLV and
PC address is printed in debug messages.
Read the value at PC address and print the value
instead of the register address.

Fixes: 5e31b3df86ec ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.e5a5f18f1b2c.Ib6117a4e7f66a075913241cc81477c0059953d5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: unify checks for HW error values

The hardware, depending on which part fails or times out,
returns 0xA5A5A5A. or 0x5A5A5A5. with the lowest 4 bits
encoding some further reason/status. However, mostly we
don't really need to care about the exact reasons, so
unify the checks for this to avoid hardcoding those magic
values all over the driver.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.3e2959741a38.I1c297a53787b87e4e2b8f296c041921338573f4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: fix getting LDPC/STBC support

Use flags field from struct ieee80211_tx_info in order to get
LDPC/STBC support. The rate parameter, used originally, is 16
bits only and does not have details of LDPC/STBC support.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.5a8856739b11.I6af4a55b22ed856f484ba77f87723dceec4904f2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: bump FW API to 79 for AX devices

Start supporting API version 79 for AX devices.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.c54013425732.I4df33c68ee3ef6b6a330f1cbef7f5bbf4f54b269@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: update response for mcc_update command

Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.

The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.

While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.

Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.71a7070aecd7.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: FTM initiator MLO support

When checking if the initiator is associated to the responder,
iterate over all active links.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.1737f26e9cf7.I8f140ca55094da1d73c387fc036394fb2c148c85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: Handle return value for iwl_mvm_sta_init

sta_init function can fail and if it returns an error then
driver should not send the request to fw to add a station.

Fixes: 69aef848052b ("wifi: iwlwifi: mvm: refactor iwl_mvm_add_sta(), iwl_mvm_rm_sta()")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.1ecd293539e8.I5ec6aab387bb2fe743a7402581beaeb9c801d31f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: make debugfs entries link specific

All of the station elements are really elements for the link. Create
them from the correct callback and return the link specific information
rather than always using the default link.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.a8e0c40d325e.I374d9433c3b8694667e1ce550d65f6f1f0d23c05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Fix permissions for valid_links debugfs entry

The entry should be a read only one and not a write only one. Fix it.

Fixes: 3d9011029227 ("wifi: mac80211: implement link switching")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.c75316990411.I1565a7fcba8a37f83efffb0cc6b71c572b896e94@changeid
[remove x16 change since it doesn't work yet]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Do not use "non-MLD AP" syntax

Instead clarify the cases where link ID == 0 is intended
for an AP STA that is not part of an AP MLD.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.77236a2e26ad.I8193ca8e236c9eb015870471f77a7d5134da3156@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: Support association to AP MLD with disabled links

An AP part of an AP MLD might be temporarily disabled, and might be
enabled later. Such a link should be included in the association
exchange, but should not be used until enabled.

Extend the NL80211_CMD_ASSOCIATE to also indicate disabled links.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.c4c61ee4c4a5.I784ef4a0d619fc9120514b5615458fbef3b3684a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211_hwsim: Don't access vif valid links directly

And instead use the vif getter functions, as a preparation for
supporting disabled/dormant links.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.8966bd5ce7c8.Ia73e3555aaf4ddf9917bced8d413fad08cc28f1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Add getter functions for vif MLD state

As a preparation to support disabled/dormant links, add the
following function:

- ieee80211_vif_usable_links(): returns the bitmap of the links
  that can be activated. Use this function in all the places that
  the bitmap of the usable links is needed.

- ieee80211_vif_is_mld(): returns true iff the vif is an MLD.
  Use this function in all the places where an indication that the
  connection is a MLD is needed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.86e3351da1fc.If6fe3a339fda2019f13f57ff768ecffb711b710a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: allow disabling SMPS debugfs controls

There are cases in which we don't want the user to override the
smps mode, e.g. when SMPS should be disabled due to EMLSR. Add
a driver flag to disable SMPS overriding and don't override if
it is set.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.ef129e80556c.I74a298fdc86b87074c95228d3916739de1400597@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>