staging: comedi: pcl724: checkpatch.pl cleanup (else after return)

Fix the checkpatch.pl warning:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: checkpatch.pl cleanup (else after return)

Fix checkpatch.pl warning:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: checkpatch.pl cleanup (else after return)

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: checkpatch.pl cleanup (else after return)

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return

Also, remove an unnecessary trailing ';' at the end of a function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: checkpatch.pl cleanup (else after return)

Fix this checkpatch.pl warning:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236: checkpatch.pl cleanup (else after return)

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: checkpatch.pl cleanup (else after return)

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: checkpatch.pl cleanup (else after return)

Fix the checkpatch.pl warning in this file:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: checkpatch.pl cleanup (else after return)

Fix the checkpatch.pl warning in this file:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255_pci: checkpatch.pl cleanup (else after return)

Fix the checkpatch.pl warning in this file:

WARNING: else is not generally useful after a break or return

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: adl_pci9118: fractured spelling fixed

a fractured spelling in previous style issue fix mended.

Signed-off-by: Sam Asadi <asadi.samuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: adl_pci9118: a style issue fixed

'quoted string split across lines' warning in checkpatching fixed
by group whole string in one line.

Signed-off-by: Sam Asadi <asadi.samuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: fix missing blank line after variable declaration

Checkpatch fix - Add missing blank line after variable declaration

Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: Replace printk by dev_warn

This patch fixes a checkpatch warning by replacing printk
by dev_warn. Tested by compilation only.

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: Remove typedefs

This patch removes uneeded typedefs reported by chackpatch and removes
one enum that is not in use. As checkpatch complained about the typedef
and the enum is not being used, this patch removes both typedef and enum.
The removed enum from card.h:

typedef enum _CARD_PHY_TYPE {
    PHY_TYPE_AUTO = 0,
    PHY_TYPE_11B,
    PHY_TYPE_11G,
    PHY_TYPE_11A
} CARD_PHY_TYPE, *PCARD_PHY_TYPE;

The following typedefs were removed, but enums were kept at device.h:

 typedef enum __device_msg_level
 typedef enum __DEVICE_NDIS_STATUS

Tested by compilation only.

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: fix some coding style errors

This includes:
 - keep "else" on the same line as the closing brace
 - don't use "else" after "return"
 - don't issue a message for an out-of-memory error
 - blank line after a declaration

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the frequency output subdevice init

For aesthetics, add some whitespace to the subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the gpct counter subdevice init

For aesthetics, add some whitespace to the subdevice init and
tidy it up a bit.

Unfortunately we can't get rid of the '#ifdef PCIDMA' here yet due
to other ifdefery in this file. For now just add the correct test
so that the async command support is not hooked up unless we have
an IRQ and DMA.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the PFI subdevice init

For aesthetics, add some whitespace to the subdevice init and
tidy it up a bit.

Remove the need for the extra local variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the EEPROM subdevice init

For aesthetics, add some whitespace to the subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the calibration subdevice init

For aesthetics, add some whitespace to the subdevice init.

Refactor the code so that the common parts of the subdevice are initialized
in one place.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: only reset the ai/ao subdevices if they exist

So of the boards supported by this driver do not have analog inputs and
some don't have analog outputs. Move the calls that reset these subdevices
during the (*attach) by ni_E_init() so they only happen if the subdevices
are present.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: init clock dividers early in ni_E_init()

The init/reset of the hardware is a bit scattered in this function. For
aesthetics, move the init of the clock dividers so it happens early and
tidy up the code a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the Digital I/O subdevice init

For aesthetics, add some whitespace to the Digital I/O subdevice init.

Only hook up the async command support if we have an irq.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: refactor 'num_p0_dio_channels' boardinfo

All of the board supported by this driver have at least 8 Digital I/O
channels. A couple of the PCI boards in ni_pcimio have 32 channels.

For aesthetics, change this member of the boardinfo into a bit-field
flag, 'has_32dio_chan', and use that when initializing the DIO subdevice
to set the number of channels to 32 or 8.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the Analog Output subdevice init

For aesthetics, add some whitespace to the Analog Output subdevice init.

Also, remove the '#ifdef PCIDMA' here and only hook up the async command
support if we have an irq and the board either has a fifo or DMA is
supported.

The ni_pcimio driver is the only place PCIDMA is defined. That driver
is also the only user of ni_mio_common that allocates devpriv->mite. Use
that test instead to determine if dma is supported.

Move 'is_67xx' check and init_ao_67xx() call into the Analog Output
subdevice init. The 67xx boards all have analog outputs and this check
does not need to be done for the boards that do not have analog outputs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up the Analog Input subdevice init

For aesthetics, add some whitespace to the Analog Input subdevice init.

The callers of ni_E_init() do the request_irq() and set dev->irq if the
interrupt is available. Only hook up the async command support if we
have the irq.

Also, remove the '#ifdef PCIDMA' here. The ni_pcimio driver is the only
place PCIDMA is defined. That driver is also the only user of ni_mio_common
that allocates devpriv->mite. Use that test instead to determine if the
subdevice async_dma_dir member needs to be initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: (*cancel) only works with async cmd support

The comedi subdevice (*cancel) function can only be called by the core if the
subdevice supports async commands. Move the initialization of this callback
to it is only set if async commands are enabled.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: refactor 'aobits' boardinfo

For aesthetics, change the 'aobits' in the boardinfo to 'ao_maxdata'
to remove the need for the calculation of the subdevice 'maxdata'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: refactor 'adbits' boardinfo

For aesthetics, change the 'adbits' in the boardinfo to 'ai_maxdata'
to remove the need for the calculation of the subdevice 'maxdata'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove unnecessary use of 'board->adbits'

For aesthetics, use the subdevice 'maxdata' instead of the board 'adbits'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix ni_ao_insn_read()

The comedi core expects (*insn_read) functions to return insn->n
data smaples. Fix this function to work like the core expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove ai_continuous from private data

This member of the private data can be determined by checking the
cmd->stop_src. Do that instead and remove the member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: merge analog output (*insn_write) functions

Currently the PCI6xxx boards use a different (*insn_write) function
for the analog output subdevice. Most of the code is identical to the
(*insn_write) used by all the other board types.

For aesthetics, merge the two (*insn_write) functions and handle the
'is_6xxx' differences in the common code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove some unnecessary boardinfo access

Currently ni_m_series_ao_config_chanlist() gets the boardinfo pointer in
order to get the number of analog output channels. Get this from the
comedi_subdevice instead.

The ni_old_ao_config_chanlist() function also gets the boardinfo pointer
to get the analog output resolution, 'aobits', in order to calculate the
value needed to convert samples from unsigned to two's complement for
bipolar ranges. Use the comedi_subdevice 'maxdata' instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove INSN_CONFIG_ANALOG_TRIG support code

None of the boardinfo that uses this code sets the 'has_analog_trig' flag so
ni_ai_config_analog_trig() always returns -EINVAL.

Also, the private data 'atrig_low', 'atrig_high', and 'atrig_mode' values
that are set by ni_ai_config_analog_trig() are never used.

Remove the incomplete INSN_CONFIG_ANALOG_TRIG support along with the unused
boardinfo and private data members.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up ni_ao_munge()

Use the bytes_per_sample() helper instead of 'sizeof(short)' to clarify
the length calculation.

Use comedi_offset_munge() to handle the unsigned to two's complement
munge of the data for bipolar ranges.

Tidy up the local variables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: add some 'is_{board type}' flags to private data

The board->reg_type if checked quite often in the ni_mio_common.c code to
handle differences in the PCI devices supported by the ni_pcimio driver.
Simplify the code a bit by adding some 'is_{board type}' bit-field flags
to the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix ni_ao_insn_write()

Comedi (*insn_write) functions are expected to write insn->n values
to the hardware. Fix this function to work like the core expects.

Also, don't rely on the return value of ni_ao_comfig_chanlist() to
determine if the values need converted to two's complement before
writing to the hardware. Use the comedi_range_is_bipolar() and
comedi_offset_munge() helpers to clarify the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove ao_win_out() macro

This marco relies on a local variable having a specific name. Remove the
macro and just use ni_ao_win_outw() directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix ni_ao_insn_write_671x()

Comedi (*insn_write) functions are expected to write insn->n values to
the hardware. Fix this function to work like the core expects.

Also, use the comedi_offset_munge() helper to convert the comedi unsigned
values into the two's complement values that the hardware needs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: remove 'ao_unipolar' flag from ni_board_struct

This member of the boardinfo for the NI MIO drivers is used to indicate if
the ranges for the analog output subdevice (ao_range_table in the boardinfo)
includes any unipolar ranges. If it's not set, the ao_range_table only has
bipolar ranges.

The 'ao_unipolar' flag is checked when munging the ao data values from the
user so that the values for bipolar ranges are converted to 2's complement
values before they are written to the hardware.

The flag is also used when programming the analog output configuration on
non-M series boards for bipolar/unipolar and external reference operation.

Simplify the driver a bit by removing this boardinfo flag and just using
the comedi_range_is_bipolar() and comedi_range_is_external() helpers to
check the range directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: introduce some 'range_is_external' helpers

The comedi_krange includes a flags member that currently identifies the
'units' of the range (RF_UNIT) and if the range is from an internal or
external source (RF_EXTERNAL).

Introduce some helper functions to check if a given range is from an
external source.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite.h: tidy up the mite channel register offsets

Convert the inline MITE_* functions, used to calculate the mite channel
register offsets, into simple macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: factor input filter disable out of (*auto_attach)

For aesthetics, factor the code that disables the input filters out of
ni_65xx_auto_attach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: fix digital output reset during attach

During the attach of this driver, the digital output ports are all
initialized to a known state. Some of the boards supported by this
driver have output ports that are inverted from the comedi view of
the output state. For these boards the values written to the ports
needs to be inverted.

Currently, only bit 0 of each port is inverted when the boardinfo
indicates that the outputs are inverted. This results in channels
0, 8, 16, etc. being set to '0' and all other channels being set
to '1'. If the boardinfo does not indicate that the outputs are
inverted, all the channels are set to '0'.

This initialization is unnecessary for the input only ports. The
input/output ports also do not need to be initialized since they
are configured as inputs during the attach.

Move the output port initialization so it occurs when the digital
output subdevice is setup. Use the 's->io_bits' value to initialize
the ports so that the correct inverted/non-inverted state is used
for the comedi '0' value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: use the subdevice 'io_bits' to handle the 'invert_outputs'

Some of the boards supported by this driver have output ports that are
inverted from the comedi view of the output state. For these boards the
read values from the output ports needs to be inverted before being
modified and inverted again before being written back in the (*insn_bits)
operation.

Currently the subdevice type and the boardinfo is checked in the (*insn_bits)
to determine if the inverted outputs need to be handled.

Since thise driver does not use the subdevice 'io_bits', simplify the driver
a bit by initializing the 'io_bits' during the attach to handle the inversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: remove 'output_bits' from private data

Remove the need for the 'output_bits' in the private data by just
reading the current state of the data port when updating the output
channels in the (*insn_bits) function.

Add a local variable to handle the inverting of the hardware values
when the boardinfo indicates that the outputs are inverted.

Rename the local variable 'port_read_bits' to 'bits' so that we can
use it for updating the output channels and reading back the actual
state to return to the user.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: tidy ni_65xx_intr_insn_bits() declaration

For aesthetics, tidy up the whitespace of this function declarations to
follow the form in the rest of the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: update the MODULE_DESCRIPTION

Update the MODULE_DESCRIPTION to better describe the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: clean up multi-line comments

Clean up the multi-line comments at the beginning of the file so they
follow the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: tidy up the comedi_driver declaration

For aesthetics, add some whitespace to the comedi_driver declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: tidy up the subdevice initialization

For aesthetics, add some whitespace to the subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: tidy up the port<->chan conversions

Introduce some convienence macros to handle the port to channel,
channel to port, and channel mask calculations based on the 8
channels per port of the hardware.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: fix ni_65xx_intr_insn_config()

Refactor this function to follow the standard (*insn_config) form.

Add a sanity check of the number of data parameters (insn->n). Currently
the core does not check INSN_CONFIG_CHANGE_NOTIFY.

Fix the writes to the rise/fall edge enable registers. The macro expects
a "port" value not the port offset value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: hook up command support only if irq is available

Subdevice 3 is used in this driver to provide edge detection of the input
channels.

Move the reset/disable of the interrupts and the request_irq() so that
when subdevice 3 is setup we can conditionally hookup the async command
support only if the irq is available.

Also, remove the noise when the irq is not available.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: remove the need for the subdevice private data

There is only one member in the subdevice private data, an unsigned value
that is the 'base_port' that the subdevice uses to access the port registers.

Just cast the appropriate value into s->private instead of allocating the
private data for each subdevice. The casts are a bit of a nusance but it
removes the unnecessary allocations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: remove 'dio_direction' from private data

The IO Select registers are readable. Remove the need for the
'dio_direction' member in the private data by just checking the
register value for the INSN_CONFIG_DIO_QUERY instruction.

Also, refactor the switch statement to return -EINVAL for unhandled
instructions and have the (*insn_config) return insn->n normally.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: cleanup INSN_CONFIG_FILTER handling

The INSN_CONFIG_FILTER instruction is used to set the deglitch filter
interval used to debounce the input channels.

Absorb the helper function into the (*insn_config) function and refactor
the code to not require the 'filter_interval' and 'filter_enable' members
in the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: cleanup recurring register map

Convert the inline functions used to calculate the offsets to the
recurring port registers and rename them to remove the CamelCase.

Define all the recurring registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: cleanup non-recurring register map defines

Rename the CamelCase defines used for the non-recurring registers.

Define all the non-recurring registers and bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: filter interval register is 32-bit

According to the register programming manual, the filter interval
register is 32-bit. Fix the writes to this register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: added virtpci info entry

This patch adds the virtpci debugfs directory and the info entry
inside of it.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_670x: remove COMEDI_MITE and HAS_DMA dependancy

The mite module provides the DMA interface for the PCI MITE ASIC used on
many National Instruments DAQ boards. This driver does not use DMA and only
depends on the mite module to initialize the MITE ASIC.

Handle the initialization localy and remove the unnecessary dependancies.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: remove COMEDI_MITE and HAS_DMA dependancy

The mite module provides the DMA interface for the PCI MITE ASIC used on
many National Instruments DAQ boards. This driver does not use DMA and only
depends on the mite module to initialize the MITE ASIC.

Handle the initialization localy and remove the unnecessary dependancies.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_pci: remove COMEDI_MITE and HAS_DMA dependancy

The mite module provides the DMA interface for the PCI MITE ASIC used on
many National Instruments DAQ boards. This driver does not use DMA and only
depends on the mite module to initialize the MITE ASIC.

Handle the initialization localy and remove the unnecessary dependancies.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255_pci: remove include of mite.h

The mite.h header is included only to pickup the MITE_IODWBSR and WENAB defines
needed to set the data window (PCI BAR 1) when initializing the PCI MITE ASIC
on the National Instruments boards supported by this driver.

Remove the include of mite.h by adding the two defines locally in this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: use addi_watchdog module to init watchdog subdevice

Use the addi_watchdog module to provide support for the watchdog
subdevice.

Also, rearrange the subdevice init blocks so that the order makes sense.
Digital input/output subdevices and subdevices for DI/DO interrupt
support, followed by timer/counter/watchdog subdevices is the new order.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: driver no longer needs to include addi_common.h

This driver no longer depends on anything in addi_common.h, save for a
few headers that it was including indirectly.  Remove the include of
addi_common.h and add the includes of <linux/interrupt.h>
and <linux/sched.h> directly.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Fix coding style errors

Only fixing errors reported by checkpatch.pl, based on the following
rules:
1. '*' should be adjacent to the data name or function name.
2. Don't use C99-style "// ..." comments.

Signed-off-by: KANG Yuxuan <stonekyx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: Cleanup coding style: indentation

This patch cleanup the follwoing coding style issues:
 - indentation style
 - new line after declaration

Tested by compilation only.

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: Cleanup coding style: lines over 80 chars

This patch cleanup the follwoing coding style issues:
 - line over 80 chars
 - spaces on the beginning of a line
 - put { and } on the correct places

Tested by compilation only.

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: Cleanup coding style: comments

This patch cleanup coding style issues on comments.

Tested by compilation only.

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: Cleanup coding style: #define

This patch cleanup coding style issues on #defines.

Tested by compilation only.

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: Cleanup indentation on statements

Use tabs instead of spaces in a set of statements and fix lines
over 80 chars. Reported by checkpatch.

Tested by compilation only.

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove proc entries from /proc/visorchipset/controlvm

Remove the code that generates proc entries for the controlVM channel.
These entries are no longer necessary for debug.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 'delete tidspbridge branch' into staging-next

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: remove DSP platform device

It was added to support DSP Bridge. Since DSP Bridge was removed, and
nothing else is using the platform device, remove it too.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove driver

The driver has been broken and disabled for several kernel versions now.
It doesn't have a maintainer anymore, and most of the people who've
worked on it have moved on. There's also still a long list of issues in
the TODO file before it can be moved out of staging. Until someone can
put in the work to make the driver work again and move it out of
staging, remove it from the kernel.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:tidspbridge Fix minor checkpatch.pl warining Unnecessary parentheses

Fixed checkpatch "WARNING: Unnecessary parentheses"

Signed-off-by: Adithya Krishnamurthy <linux.challenge1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:tidspbridge Fix minor checkpatch.pl warning unnecessary whitespace before a quoted newline

Fixed checkpatch "WARNING: unnecessary whitespace before a quoted newline"

Signed-off-by: Adithya Krishnamurthy <linux.challenge1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:tidspbridge Fix checkpatch.pl warning char * array declaration might be better as static const

Fixed checkpatch "WARNING: char * array declaration might be better as static const"

Signed-off-by: Adithya Krishnamurthy <linux.challenge1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: removing not useful `else` after return

Signed-off-by: Kinka Huang <kinkabrain@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: usbpipe irrelevant function descriptions

All these have no or vague meaning.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename s_nsBulkInUsbIoCompleteRead to vnt_submit_rx_urb_complete

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename PIPEnsBulkInUsbRead to vnt_submit_rx_urb

The function just submits to rx urbs.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename s_nsBulkOutIoCompleteWrite to vnt_tx_context_complete

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename PIPEnsSendBulkOut to vnt_tx_context.

We are just tx the context

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename s_nsInterruptUsbIoCompleteRead to vnt_start_interrupt_urb_complete

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: usbpipe rename PIPEnsInterruptRead to vnt_start_interrupt_urb

Drop Read and PIPE. The function starts the interrupt urb.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: int.c remove irrelevant function description

The function does not directly poll from here

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rename INTvWorkItem to vnt_int_start_interrupt

This function does run as work item, it starts interrupts from the
device.

Rename to vnt_int_start_interrupt

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: int rename INTnsProcessData to vnt_int_process_data

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: int.c Replace DBG_PRT debug messages

Replace with dev_dbg

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: INTvWorkItem remove camel case

Camel case changes
pDevice -> priv
ntStatus -> status

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Clean up else statement from binder_send_failed_reply

Kernel coding style. Remove useless else statement after return.

Changes from v1 and v2: Fix warning for mixed declarations and code.
Declaration of "struct binder_transaction *next" made outside of while.

Changes from v3: Removed initialization to NULL for next variable.

Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Clean up else statement from sync_fence_poll()

Kernel coding style. Remove useless else statement after return.

Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: fix coding style

This patch fixes checkpatch.pl warning. Add blank line after
declaration.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8821ae: delete unneeded lines in cam.c

This is a patch to the cam.c file that removes some unneeded lines of commented-out code

Signed-off-by: Joerg C. Meyer <joerg@meyer.homedns.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove dgap_newnode()

The dgap_newnode() is useless for creating new node.
So just use kzalloc and set a type in case statement.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>