drivers/net/b44: Change to non-atomic bit operations on pwol_mask

[ Upstream commit f11421ba4af706cb4f5703de34fa77fba8472776 ]

Atomic operations that span cache lines are super-expensive on x86
(not just to the current processor, but also to other processes as all
memory operations are blocked until the operation completes). Upcoming
x86 processors have a switch to cause such operations to generate a #AC
trap. It is expected that some real time systems will enable this mode
in BIOS.

In preparation for this, it is necessary to fix code that may execute
atomic instructions with operands that cross cachelines because the #AC
trap will crash the kernel.

Since "pwol_mask" is local and never exposed to concurrency, there is
no need to set bits in pwol_mask using atomic operations.

Directly operate on the byte which contains the bit instead of using
__set_bit() to avoid any big endian concern due to type cast to
unsigned long in __set_bit().

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Google gve: Remove dma_wmb() before ringing doorbell

[ Upstream commit b54ef37b1ce892fdf6b632d566246d2f2f539910 ]

Current code use dma_wmb() to ensure Rx/Tx descriptors are visible
to device before writing to doorbell.

However, these dma_wmb() are wrong and unnecessary. Therefore,
they should be removed.

iowrite32be() called from gve_rx_write_doorbell()/gve_tx_put_doorbell()
should guaratee that all previous writes to WB/UC memory is visible to
device before the write done by iowrite32be().

E.g. On ARM64, iowrite32be() calls __iowmb() which expands to dma_wmb()
and only then calls __raw_writel().

Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls

[ Upstream commit 19b61392c5a852b4e8a0bf35aecb969983c5932d ]

dw_spi_irq() and dw_spi_transfer_one concurrent calls.

I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null,
dw->len==4, and dw->tx_end==1.

When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one
may concurrent visit dw_spi, so I think dw_spi structure lack of protection.

Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq,
store dw rx/tx instructions and other cores handle irq load dw rx/tx
instructions may out of order.

[ 1025.321302] Call trace:
...
[ 1025.321319]  __crash_kexec+0x98/0x148
[ 1025.321323]  panic+0x17c/0x314
[ 1025.321329]  die+0x29c/0x2e8
[ 1025.321334]  die_kernel_fault+0x68/0x78
[ 1025.321337]  __do_kernel_fault+0x90/0xb0
[ 1025.321346]  do_page_fault+0x88/0x500
[ 1025.321347]  do_translation_fault+0xa8/0xb8
[ 1025.321349]  do_mem_abort+0x68/0x118
[ 1025.321351]  el1_da+0x20/0x8c
[ 1025.321362]  dw_writer+0xc8/0xd0
[ 1025.321364]  interrupt_transfer+0x60/0x110
[ 1025.321365]  dw_spi_irq+0x48/0x70
...

Signed-off-by: wuxu.wu <wuxu.wu@huawei.com>
Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: tcan4x5x: tcan4x5x_parse_config(): reset device before register access

[ Upstream commit c3083124e6a1c0d6cd4fe3b3f627b488bd3b10c4 ]

It's a good idea to reset a ip-block/spi device before using it, this
patch will reset the device.

And a generic reset function if needed elsewhere.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: jz4740: Silence error if code is -EPROBE_DEFER

[ Upstream commit ce03cbcb4b4fd2a3817f32366001f1ca45d213b8 ]

Avoid printing any error message if the error code is -EPROBE_DEFER.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20191216162432.1256-1-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: orion: fix platform_get_irq() complaints

[ Upstream commit dcbce5fbcc69bf2553f650004aad44bf390eca73 ]

Fix:

orion_wdt f1020300.watchdog: IRQ index 1 not found

which is caused by platform_get_irq() now complaining when optional
IRQs are not found.  Neither interrupt for orion is required, so
make them both optional.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: rn5t618_wdt: fix module aliases

[ Upstream commit a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ]

Platform device aliases were missing so module autoloading
did not work.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: max77620_wdt: fix potential build errors

[ Upstream commit da9e3f4e30a53cd420cf1e6961c3b4110f0f21f0 ]

max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE
to fix potential build errors.

Signed-off-by: David Engraf <david.engraf@sysgo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID

[ Upstream commit 1479a82d82df68dfac29c72c774cb8bdc17d4eb1 ]

Added Tiger Lake PCI device ID to the supported device list.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: cpcap-usb: Prevent USB line glitches from waking up modem

[ Upstream commit 63078b6ba09e842f09df052c5728857389fddcd2 ]

The micro-USB connector on Motorola Mapphone devices can be muxed between
the SoC and the mdm6600 modem. But even when used for the SoC, configuring
the PHY with ID pin grounded will wake up the modem from idle state. Looks
like the issue is probably caused by line glitches.

We can prevent the glitches by using a previously unknown mode of the
GPIO mux to prevent the USB lines from being connected to the moden while
configuring the USB PHY, and enable the USB lines after configuring the
PHY.

Note that this only prevents waking up mdm6600 as regular USB A-host mode,
and does not help when connected to a lapdock. The lapdock specific issue
still needs to be debugged separately.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime()

[ Upstream commit dd836ddf4e4e1c7f1eb2ae44783ccd70872ef24e ]

remove_link() is currently calling snd_soc_remove_dai_link() after
it has already freed the memory for the link name. But this is later
read from snd_soc_get_pcm_runtime() causing a KASAN use-after-free
warning. Reorder the cleanups to fix this issue.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191204210447.11701-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_audmix: add missed pm_runtime_disable

[ Upstream commit 77fffa742285f2b587648d6c72b5c705633f146f ]

The driver forgets to call pm_runtime_disable in probe failure
and remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20191203111303.12933-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp: Increase PHY ready timeout

[ Upstream commit cd217ee6867d285ceecd610fa1006975d5c683fa ]

It's typical for the QHP PHY to take slightly above 1ms to initialize,
so increase the timeout of the PHY ready check to 10ms - as already done
in the downstream PCIe driver.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Evan Green <evgreen@chromium.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/hid/hid-multitouch.c: fix a possible null pointer access.

[ Upstream commit 306d5acbfc66e7cccb4d8f91fc857206b8df80d1 ]

1002     if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) {
1003         struct input_mt_slot *i_slot = &mt->slots[slotnum];
1004
1005         if (input_mt_is_active(i_slot) &&
1006             input_mt_is_used(mt, i_slot))
1007             return -EAGAIN;
1008     }

We previously assumed 'mt' could be null (see line 1002).

The following situation is similar, so add a judgement.

Signed-off-by: Pan Zhang <zhangpan26@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free

[ Upstream commit 921162c81a089aa2f442103290f1af9ba281fc9f ]

When the PCM_PARAM IPC fails while configuring the FE, the kernel
oopses in the HDaudio link DMA .hw_free operation. The root cause is a
NULL dma_data since the BE .hw_params was never called by the SOC
core.

This error can also happen if the HDaudio link DMA configuration IPC
fails in the BE .hw_params.

This patches makes sure the dma_data is properly saved in .hw_params,
and tested before being use in hw_free.

GitHub issue: https://github.com/thesofproject/linux/issues/1417

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218000518.5830-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: fix fault at driver unload after failed probe

[ Upstream commit b06e46427f987bf83dcb6a69516b57276eb8ec0c ]

If sof_machine_check() fails during driver probe, the IPC
state is not initialized and this will lead to a NULL
dereference at driver unload. Example log is as follows:

[ 1535.980630] sof-audio-pci 0000:00:1f.3: error: no matching ASoC machine driver found - aborting probe
[ 1535.980631] sof-audio-pci 0000:00:1f.3: error: failed to get machine info -19
[ 1535.980632] sof-audio-pci 0000:00:1f.3: error: sof_probe_work failed err: -19
[ 1550.798373] BUG: kernel NULL pointer dereference, address: 0000000000000008
...
[ 1550.798393] Call Trace:
[ 1550.798397]  snd_sof_ipc_free+0x15/0x30 [snd_sof]
[ 1550.798399]  snd_sof_device_remove+0x29/0xa0 [snd_sof]
[ 1550.798400]  sof_pci_remove+0x10/0x30 [snd_sof_pci]

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218000518.5830-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: wacom: Recognize new MobileStudio Pro PID

[ Upstream commit fe4e940f0f91b4a506f048b42e00386f5ad322b6 ]

A new PID is in use for repaired MobileStudio Pro devices. Add it to the
list of devices that need special-casing in wacom_wac_pad_event.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: intel-ish-hid: ipc: add CMP device id

[ Upstream commit abb33ee8a8c0d146b4b2c52937dc86a15ec92d05 ]

Add Comet Lake H into ishtp support list.

Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Add quirk for incorrect input length on Lenovo Y720

[ Upstream commit fd0913768701612fc2b8ab9c8a5c019133e8d978 ]

Apply it to the Lenovo Y720 gaming laptop I2C peripheral then.

This fixes dmesg being flooded with errors visible on un-suspend
in Linux Mint 19 Cinnamon.

Example of error log:

<...>
[    4.326588] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[    4.326845] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[    4.327095] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[    4.327341] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[    4.327609] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
<...>

Example of fixed log (debug on)

<...>
[ 3731.333183] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.333581] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.333842] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.334107] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.334367] i2c_hid i2c-ITE33D1:00: input: 02 00
<...>

[jkosina@suse.cz: rebase onto more recent codebase]
Signed-off-by: Pavel Balan <admin@kryma.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: asus: Ignore Asus vendor-page usage-code 0xff events

[ Upstream commit c07a0254c89e4bb69ca781cd488baa5b628e2754 ]

At least on a T100HA an Asus vendor-page usage-code 0xff event is send on
every suspend and again on resume, resulting in the following warning:

asus 0003:0B05:1807.0002: Unmapped Asus vendor usagepage code 0xff

being logged twice on every suspend/resume.

This commit silences the "Unmapped Asus vendor usagepage code ..."
warning for usage-code 0xff to avoid these warnings being logged.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: ite: Add USB id match for Acer SW5-012 keyboard dock

[ Upstream commit 8f18eca9ebc57d6b150237033f6439242907e0ba ]

The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad
which is connected to an ITE 8595 USB keyboard controller chip.

This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.

This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Add quirk for Xin-Mo Dual Controller

[ Upstream commit c62f7cd8ed066a93a243643ebf57ca99f754388e ]

Without the quirk, joystick shows up as single controller
for both first and second player pads/pins.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arc: eznps: fix allmodconfig kconfig warning

[ Upstream commit 1928b36cfa4df1aeedf5f2644d0c33f3a1fcfd7b ]

Fix kconfig warning for arch/arc/plat-eznps/Kconfig allmodconfig:

WARNING: unmet direct dependencies detected for CLKSRC_NPS
  Depends on [n]: GENERIC_CLOCKEVENTS [=y] && !PHYS_ADDR_T_64BIT [=y]
  Selected by [y]:
  - ARC_PLAT_EZNPS [=y]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ofer Levi <oferle@mellanox.com>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Add LG MELF0410 I2C touchscreen support

[ Upstream commit 348b80b273fbf4ce2a307f9e38eadecf37828cad ]

Add multitouch support for LG MELF I2C touchscreen.
Apply the same workaround as LG USB touchscreen.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix use-after-free in rxrpc_receive_data()

[ Upstream commit 122d74fac84204b9a98263636f6f9a3b2e665639 ]

The subpacket scanning loop in rxrpc_receive_data() references the
subpacket count in the private data part of the sk_buff in the loop
termination condition.  However, when the final subpacket is pasted into
the ring buffer, the function is no longer has a ref on the sk_buff and
should not be looking at sp->* any more.  This point is actually marked in
the code when skb is cleared (but sp is not - which is an error).

Fix this by caching sp->nr_subpackets in a local variable and using that
instead.

Also clear 'sp' to catch accesses after that point.

This can show up as an oops in rxrpc_get_skb() if sp->nr_subpackets gets
trashed by the sk_buff getting freed and reused in the meantime.

Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: include struct nhmsg size in nh nlmsg size

[ Upstream commit f9e95555757915fc194288862d2978e370fe316b ]

Include the size of struct nhmsg size when calculating
how much of a payload to allocate in a new netlink nexthop
notification message.

Without this, we will fail to fill the skbuff at certain nexthop
group sizes.

You can reproduce the failure with the following iproute2 commands:

ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy

ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10
ip ro add 1.1.1.11/32 dev dummy11
ip ro add 1.1.1.12/32 dev dummy12
ip ro add 1.1.1.13/32 dev dummy13
ip ro add 1.1.1.14/32 dev dummy14
ip ro add 1.1.1.15/32 dev dummy15
ip ro add 1.1.1.16/32 dev dummy16
ip ro add 1.1.1.17/32 dev dummy17
ip ro add 1.1.1.18/32 dev dummy18
ip ro add 1.1.1.19/32 dev dummy19

ip next add id 1 via 1.1.1.1 dev dummy1
ip next add id 2 via 1.1.1.2 dev dummy2
ip next add id 3 via 1.1.1.3 dev dummy3
ip next add id 4 via 1.1.1.4 dev dummy4
ip next add id 5 via 1.1.1.5 dev dummy5
ip next add id 6 via 1.1.1.6 dev dummy6
ip next add id 7 via 1.1.1.7 dev dummy7
ip next add id 8 via 1.1.1.8 dev dummy8
ip next add id 9 via 1.1.1.9 dev dummy9
ip next add id 10 via 1.1.1.10 dev dummy10
ip next add id 11 via 1.1.1.11 dev dummy11
ip next add id 12 via 1.1.1.12 dev dummy12
ip next add id 13 via 1.1.1.13 dev dummy13
ip next add id 14 via 1.1.1.14 dev dummy14
ip next add id 15 via 1.1.1.15 dev dummy15
ip next add id 16 via 1.1.1.16 dev dummy16
ip next add id 17 via 1.1.1.17 dev dummy17
ip next add id 18 via 1.1.1.18 dev dummy18
ip next add id 19 via 1.1.1.19 dev dummy19

ip next add id 1111 group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19
ip next del id 1111

Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: minimal: Fix an error handling path in 'mlxsw_m_port_create()'

[ Upstream commit 6dd4b4f3936e17fedea1308bc70e9716f68bf232 ]

An 'alloc_etherdev()' called is not ballanced by a corresponding
'free_netdev()' call in one error handling path.

Slighly reorder the error handling code to catch the missed case.

Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: segment looped gso packets correctly

[ Upstream commit 6cd021a58c18a1731f7e47f83e172c0c302d65e5 ]

Multicast and broadcast packets can be looped from egress to ingress
pre segmentation with dev_loopback_xmit. That function unconditionally
sets ip_summed to CHECKSUM_UNNECESSARY.

udp_rcv_segment segments gso packets in the udp rx path. Segmentation
usually executes on egress, and does not expect packets of this type.
__udp_gso_segment interprets !CHECKSUM_PARTIAL as CHECKSUM_NONE. But
the offsets are not correct for gso_make_checksum.

UDP GSO packets are of type CHECKSUM_PARTIAL, with their uh->check set
to the correct pseudo header checksum. Reset ip_summed to this type.
(CHECKSUM_PARTIAL is allowed on ingress, see comments in skbuff.h)

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: socionext: fix xdp_result initialization in netsec_process_rx

[ Upstream commit 02758cb6dac31a2b4bd9e535cffbe718acd46404 ]

Fix xdp_result initialization in netsec_process_rx in order to not
increase rx counters if there is no bpf program attached to the xdp hook
and napi_gro_receive returns GRO_DROP

Fixes: ba2b232108d3c ("net: netsec: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: socionext: fix possible user-after-free in netsec_process_rx

[ Upstream commit b5e82e3c89c78ee0407ea8e8087af5519b6c7bae ]

Fix possible use-after-free in in netsec_process_rx that can occurs if
the first packet is sent to the normal networking stack and the
following one is dropped by the bpf program attached to the xdp hook.
Fix the issue defining the skb pointer in the 'budget' loop

Fixes: ba2b232108d3c ("net: netsec: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: walk through all child classes in tc_bind_tclass()

[ Upstream commit 760d228e322e99cdf6d81b4b60a268b8f13cf67a ]

In a complex TC class hierarchy like this:

tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit         \
  avpkt 1000 cell 8
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit  \
  rate 6Mbit weight 0.6Mbit prio 8 allot 1514 cell 8 maxburst 20      \
  avpkt 1000 bounded

tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
  sport 80 0xffff flowid 1:3
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
  sport 25 0xffff flowid 1:4

tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 100Mbit  \
  rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20      \
  avpkt 1000
tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 100Mbit  \
  rate 3Mbit weight 0.3Mbit prio 5 allot 1514 cell 8 maxburst 20      \
  avpkt 1000

where filters are installed on qdisc 1:0, so we can't merely
search from class 1:1 when creating class 1:3 and class 1:4. We have
to walk through all the child classes of the direct parent qdisc.
Otherwise we would miss filters those need reverse binding.

Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: fix ops->bind_class() implementations

[ Upstream commit 2e24cd755552350b94a7617617c6877b8cbcb701 ]

The current implementations of ops->bind_class() are merely
searching for classid and updating class in the struct tcf_result,
without invoking either of cl_ops->bind_tcf() or
cl_ops->unbind_tcf(). This breaks the design of them as qdisc's
like cbq use them to count filters too. This is why syzbot triggered
the warning in cbq_destroy_class().

In order to fix this, we have to call cl_ops->bind_tcf() and
cl_ops->unbind_tcf() like the filter binding path. This patch does
so by refactoring out two helper functions __tcf_bind_filter()
and __tcf_unbind_filter(), which are lockless and accept a Qdisc
pointer, then teaching each implementation to call them correctly.

Note, we merely pass the Qdisc pointer as an opaque pointer to
each filter, they only need to pass it down to the helper
functions without understanding it at all.

Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class")
Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: ematch: reject invalid TCF_EM_SIMPLE

[ Upstream commit 55cd9f67f1e45de8517cdaab985fb8e56c0bc1d8 ]

It is possible for malicious userspace to set TCF_EM_SIMPLE bit
even for matches that should not have this bit set.

This can fool two places using tcf_em_is_simple()

1) tcf_em_tree_destroy() -> memory leak of em->data
   if ops->destroy() is NULL

2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes
   of a kernel pointer.

BUG: memory leak
unreferenced object 0xffff888121850a40 (size 32):
  comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s)
  hex dump (first 32 bytes):
    00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline]
    [<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline]
    [<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671
    [<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127
    [<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline]
    [<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32
    [<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline]
    [<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline]
    [<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300
    [<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline]
    [<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219
    [<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104
    [<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415
    [<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zd1211rw: fix storage endpoint lookup

commit 2d68bb2687abb747558b933e80845ff31570a49c upstream.

Make sure to use the current alternate setting when verifying the
storage interface descriptors to avoid submitting an URB to an invalid
endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: a1030e92c150 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device")
Cc: stable <stable@vger.kernel.org> # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8xxxu: fix interface sanity check

commit 39a4281c312f2d226c710bc656ce380c621a2b16 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Cc: stable <stable@vger.kernel.org> # 4.4
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: fix interface sanity check

commit 3428fbcd6e6c0850b1a8b2a12082b7b2aabb3da3 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable <stable@vger.kernel.org> # 3.4
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: fix storage endpoint lookup

commit 0ef332951e856efa89507cdd13ba8f4fb8d4db12 upstream.

Make sure to use the current alternate setting when verifying the
storage interface descriptors to avoid submitting an URB to an invalid
endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices")
Cc: stable <stable@vger.kernel.org> # 2.6.39
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix memory allocation in __smb2_handle_cancelled_cmd()

commit 0a5a98863c9debc02387b3d23c46d187756f5e2b upstream.

__smb2_handle_cancelled_cmd() is called under a spin lock held in
cifs_mid_q_entry_release(), so make its memory allocation GFP_ATOMIC.

This issue was observed when running xfstests generic/028:

[ 1722.589204] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72064 cmd: 5
[ 1722.590687] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72065 cmd: 17
[ 1722.593529] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72066 cmd: 6
[ 1723.039014] BUG: sleeping function called from invalid context at mm/slab.h:565
[ 1723.040710] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 30877, name: cifsd
[ 1723.045098] CPU: 3 PID: 30877 Comm: cifsd Not tainted 5.5.0-rc4+ #313
[ 1723.046256] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[ 1723.048221] Call Trace:
[ 1723.048689]  dump_stack+0x97/0xe0
[ 1723.049268]  ___might_sleep.cold+0xd1/0xe1
[ 1723.050069]  kmem_cache_alloc_trace+0x204/0x2b0
[ 1723.051051]  __smb2_handle_cancelled_cmd+0x40/0x140 [cifs]
[ 1723.052137]  smb2_handle_cancelled_mid+0xf6/0x120 [cifs]
[ 1723.053247]  cifs_mid_q_entry_release+0x44d/0x630 [cifs]
[ 1723.054351]  ? cifs_reconnect+0x26a/0x1620 [cifs]
[ 1723.055325]  cifs_demultiplex_thread+0xad4/0x14a0 [cifs]
[ 1723.056458]  ? cifs_handle_standard+0x2c0/0x2c0 [cifs]
[ 1723.057365]  ? kvm_sched_clock_read+0x14/0x30
[ 1723.058197]  ? sched_clock+0x5/0x10
[ 1723.058838]  ? sched_clock_cpu+0x18/0x110
[ 1723.059629]  ? lockdep_hardirqs_on+0x17d/0x250
[ 1723.060456]  kthread+0x1ab/0x200
[ 1723.061149]  ? cifs_handle_standard+0x2c0/0x2c0 [cifs]
[ 1723.062078]  ? kthread_create_on_node+0xd0/0xd0
[ 1723.062897]  ret_from_fork+0x3a/0x50

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Fixes: 9150c3adbf24 ("CIFS: Close open handle after interrupted close")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: set correct max-buffer-size for smb2_ioctl_init()

commit 731b82bb1750a906c1e7f070aedf5505995ebea7 upstream.

Fix two places where we need to adjust down the max response size for
ioctl when it is used together with compounding.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix task struct use-after-free on reconnect

commit f1f27ad74557e39f67a8331a808b860f89254f2d upstream.

The task which created the MID may be gone by the time cifsd attempts to
call the callbacks on MIDs from cifs_reconnect().

This leads to a use-after-free of the task struct in cifs_wake_up_task:

 ==================================================================
 BUG: KASAN: use-after-free in __lock_acquire+0x31a0/0x3270
 Read of size 8 at addr ffff8880103e3a68 by task cifsd/630

 CPU: 0 PID: 630 Comm: cifsd Not tainted 5.5.0-rc6+ #119
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
 Call Trace:
  dump_stack+0x8e/0xcb
  print_address_description.constprop.5+0x1d3/0x3c0
  ? __lock_acquire+0x31a0/0x3270
  __kasan_report+0x152/0x1aa
  ? __lock_acquire+0x31a0/0x3270
  ? __lock_acquire+0x31a0/0x3270
  kasan_report+0xe/0x20
  __lock_acquire+0x31a0/0x3270
  ? __wake_up_common+0x1dc/0x630
  ? _raw_spin_unlock_irqrestore+0x4c/0x60
  ? mark_held_locks+0xf0/0xf0
  ? _raw_spin_unlock_irqrestore+0x39/0x60
  ? __wake_up_common_lock+0xd5/0x130
  ? __wake_up_common+0x630/0x630
  lock_acquire+0x13f/0x330
  ? try_to_wake_up+0xa3/0x19e0
  _raw_spin_lock_irqsave+0x38/0x50
  ? try_to_wake_up+0xa3/0x19e0
  try_to_wake_up+0xa3/0x19e0
  ? cifs_compound_callback+0x178/0x210
  ? set_cpus_allowed_ptr+0x10/0x10
  cifs_reconnect+0xa1c/0x15d0
  ? generic_ip_connect+0x1860/0x1860
  ? rwlock_bug.part.0+0x90/0x90
  cifs_readv_from_socket+0x479/0x690
  cifs_read_from_socket+0x9d/0xe0
  ? cifs_readv_from_socket+0x690/0x690
  ? mempool_resize+0x690/0x690
  ? rwlock_bug.part.0+0x90/0x90
  ? memset+0x1f/0x40
  ? allocate_buffers+0xff/0x340
  cifs_demultiplex_thread+0x388/0x2a50
  ? cifs_handle_standard+0x610/0x610
  ? rcu_read_lock_held_common+0x120/0x120
  ? mark_lock+0x11b/0xc00
  ? __lock_acquire+0x14ed/0x3270
  ? __kthread_parkme+0x78/0x100
  ? lockdep_hardirqs_on+0x3e8/0x560
  ? lock_downgrade+0x6a0/0x6a0
  ? lockdep_hardirqs_on+0x3e8/0x560
  ? _raw_spin_unlock_irqrestore+0x39/0x60
  ? cifs_handle_standard+0x610/0x610
  kthread+0x2bb/0x3a0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x3a/0x50

 Allocated by task 649:
  save_stack+0x19/0x70
  __kasan_kmalloc.constprop.5+0xa6/0xf0
  kmem_cache_alloc+0x107/0x320
  copy_process+0x17bc/0x5370
  _do_fork+0x103/0xbf0
  __x64_sys_clone+0x168/0x1e0
  do_syscall_64+0x9b/0xec0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 Freed by task 0:
  save_stack+0x19/0x70
  __kasan_slab_free+0x11d/0x160
  kmem_cache_free+0xb5/0x3d0
  rcu_core+0x52f/0x1230
  __do_softirq+0x24d/0x962

 The buggy address belongs to the object at ffff8880103e32c0
  which belongs to the cache task_struct of size 6016
 The buggy address is located 1960 bytes inside of
  6016-byte region [ffff8880103e32c0, ffff8880103e4a40)
 The buggy address belongs to the page:
 page:ffffea000040f800 refcount:1 mapcount:0 mapping:ffff8880108da5c0
 index:0xffff8880103e4c00 compound_mapcount: 0
 raw: 4000000000010200 ffffea00001f2208 ffffea00001e3408 ffff8880108da5c0
 raw: ffff8880103e4c00 0000000000050003 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff8880103e3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8880103e3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 >ffff8880103e3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                           ^
  ffff8880103e3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8880103e3b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

This can be reliably reproduced by adding the below delay to
cifs_reconnect(), running find(1) on the mount, restarting the samba
server while find is running, and killing find during the delay:

   spin_unlock(&GlobalMid_Lock);
   mutex_unlock(&server->srv_mutex);

 + msleep(10000);
 +
   cifs_dbg(FYI, "%s: issuing mid callbacks\n", __func__);
   list_for_each_safe(tmp, tmp2, &retry_list) {
   mid_entry = list_entry(tmp, struct mid_q_entry, qhead);

Fix this by holding a reference to the task struct until the MID is
freed.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: chelsio - fix writing tfm flags to wrong place

commit bd56cea012fc2d6381e8cd3209510ce09f9de8c9 upstream.

The chelsio crypto driver is casting 'struct crypto_aead' directly to
'struct crypto_tfm', which is incorrect because the crypto_tfm isn't the
first field of 'struct crypto_aead'.  Consequently, the calls to
crypto_tfm_set_flags() are modifying some other field in the struct.

Also, the driver is setting CRYPTO_TFM_RES_BAD_KEY_LEN in
->setauthsize(), not just in ->setkey().  This is incorrect since this
flag is for bad key lengths, not for bad authentication tag lengths.

Fix these bugs by removing the broken crypto_tfm_set_flags() calls from
->setauthsize() and by fixing them in ->setkey().

Fixes: 324429d74127 ("chcr: Support for Chelsio's Crypto Hardware")
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Fix test_async_driver_probe if NUMA is disabled

commit 264d25275a46fce5da501874fa48a2ae5ec571c8 upstream.

Since commit 57ea974fb871 ("driver core: Rewrite test_async_driver_probe
to cover serialization and NUMA affinity"), running the test with NUMA
disabled results in warning messages similar to the following.

test_async_driver test_async_driver.12: NUMA node mismatch -1 != 0

If CONFIG_NUMA=n, dev_to_node(dev) returns -1, and numa_node_id()
returns 0. Both are widely used, so it appears risky to change return
values. Augment the check with IS_ENABLED(CONFIG_NUMA) instead
to fix the problem.

Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20191127202453.28087-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: st_gyro: Correct data for LSM9DS0 gyro

commit e825070f697abddf3b9b0a675ed0ff1884114818 upstream.

The commit 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
assumes that gyro in LSM9DS0 is the same as others with 0xd4 WAI ID,
but datasheet tells slight different story, i.e. the first scale factor
for the chip is 245 dps, and not 250 dps.

Correct this by introducing a separate settings for LSM9DS0.

Fixes: 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
Depends-on: 45a4e4220bf4 ("iio: gyro: st_gyro: fix L3GD20H support")
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: stm32-dfsdm: fix single conversion

commit dc26935fb60e8da8d59655dd2ec0de47b20d7d8f upstream.

Apply data formatting to single conversion,
as this is already done in continuous and trigger modes.

Fixes: 102afde62937 ("iio: adc: stm32-dfsdm: manage data resolution in trigger mode")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Cc: <Stable@vger.kernel.org>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add comet point (lake) H device ids

commit 559e575a8946a6561dfe8880de341d4ef78d5994 upstream.

Add Comet Point device IDs for Comet Lake H platforms.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200119094229.20116-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hdcp: bind only with i915 on the same PCH

commit 1e8d19d9b0dfcf11b61bac627203a290577e807a upstream.

The mei device and i915 must reside on the same
PCH in order for HDCP to work. Make the component
matching function enforce this requirement.

                   hdcp
                    |
   i915            mei
    |               |
    +----= PCH =----+

Cc: <stable@vger.kernel.org> v5.0+
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20191212084103.2893-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix log spam for existing debugfs file creation.

commit eb143f8756e77c8fcfc4d574922ae9efd3a43ca9 upstream.

Since commit 43e23b6c0b01 ("debugfs: log errors when something goes wrong")
debugfs logs attempts to create existing files.

However binder attempts to create multiple debugfs files with
the same name when a single PID has multiple contexts, this leads
to log spamming during an Android boot (17 such messages during
boot on my system).

Fix this by checking if we already know the PID and only create
the debugfs entry for the first context per PID.

Do the same thing for binderfs for symmetry.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Acked-by: Todd Kjos <tkjos@google.com>
Fixes: 43e23b6c0b01 ("debugfs: log errors when something goes wrong")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1578671054-5982-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

component: do not dereference opaque pointer in debugfs

commit ef9ffc1e5f1ac73ecd2fb3b70db2a3b2472ff2f7 upstream.

The match data does not have to be a struct device pointer, and indeed
very often is not. Attempt to treat it as such easily results in a
crash.

For the components that are not registered, we don't know which device
is missing. Once it it is there, we can use the struct component to get
the device and whether it's bound or not.

Fixes: 59e73854b5fd ('component: add debugfs support')
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@vger.kernel.org>
Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20191118115431.63626-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugfs: Return -EPERM when locked down

commit a37f4958f7b63d2b3cd17a76151fdfc29ce1da5f upstream.

When lockdown is enabled, debugfs_is_locked_down returns 1. It will then
trigger the following:

WARNING: CPU: 48 PID: 3747
CPU: 48 PID: 3743 Comm: bash Not tainted 5.4.0-1946.x86_64 #1
Hardware name: Oracle Corporation ORACLE SERVER X7-2/ASM, MB, X7-2, BIOS 41060400 05/20/2019
RIP: 0010:do_dentry_open+0x343/0x3a0
Code: 00 40 08 00 45 31 ff 48 c7 43 28 40 5b e7 89 e9 02 ff ff ff 48 8b 53 28 4c 8b 72 70 4d 85 f6 0f 84 10 fe ff ff e9 f5 fd ff ff <0f> 0b 41 bf ea ff ff ff e9 3b ff ff ff 41 bf e6 ff ff ff e9 b4 fe
RSP: 0018:ffffb8740dde7ca0 EFLAGS: 00010202
RAX: ffffffff89e88a40 RBX: ffff928c8e6b6f00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff928dbfd97778 RDI: ffff9285cff685c0
RBP: ffffb8740dde7cc8 R08: 0000000000000821 R09: 0000000000000030
R10: 0000000000000057 R11: ffffb8740dde7a98 R12: ffff926ec781c900
R13: ffff928c8e6b6f10 R14: ffffffff8936e190 R15: 0000000000000001
FS:  00007f45f6777740(0000) GS:ffff928dbfd80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff95e0d5d8 CR3: 0000001ece562006 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 vfs_open+0x2d/0x30
 path_openat+0x2d4/0x1680
 ? tty_mode_ioctl+0x298/0x4c0
 do_filp_open+0x93/0x100
 ? strncpy_from_user+0x57/0x1b0
 ? __alloc_fd+0x46/0x150
 do_sys_open+0x182/0x230
 __x64_sys_openat+0x20/0x30
 do_syscall_64+0x60/0x1b0
 entry_SYSCALL_64_after_hwframe+0x170/0x1d5
RIP: 0033:0x7f45f5e5ce02
Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 25 59 2d 00 8b 00 85 c0 75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
RSP: 002b:00007fff95e0d2e0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 0000561178c069b0 RCX: 00007f45f5e5ce02
RDX: 0000000000000241 RSI: 0000561178c08800 RDI: 00000000ffffff9c
RBP: 00007fff95e0d3e0 R08: 0000000000000020 R09: 0000000000000005
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000000001 R15: 0000561178c08800

Change the return type to int and return -EPERM when lockdown is enabled
to remove the warning above. Also rename debugfs_is_locked_down to
debugfs_locked_down to make it sound less like it returns a boolean.

Fixes: 5496197f9b08 ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable <stable@vger.kernel.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20191207161603.35907-1-eric.snowberg@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: imx: fix a race condition in receive path

commit 101aa46bd221b768dfff8ef3745173fc8dbb85ee upstream.

The main irq handler function starts by first masking disabled
interrupts in the status register values to ensure to only handle
enabled interrupts. This is important as when the RX path in the
hardware is disabled reading the RX fifo results in an external abort.

This checking must be done under the port lock, otherwise the following
can happen:

     CPU1                            | CPU2
                                     |
     irq triggers as there are chars |
     in the RX fifo                  |
     | grab port lock
     imx_uart_int finds RRDY enabled |
     and calls imx_uart_rxint which  |
     has to wait for port lock       |
                                     | disable RX (e.g. because we're
                                     | using RS485 with !RX_DURING_TX)
                                     |
                                     | release port lock
     read from RX fifo with RX       |
     disabled => exception           |

So take the port lock only once in imx_uart_int() instead of in the
functions called from there.

Reported-by: Andre Renaud <arenaud@designa-electronics.com>
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20200121071702.20150-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_bcm2835aux: Fix line mismatch on driver unbind

commit dc76697d7e933d5e299116f219c890568785ea15 upstream.

Unbinding the bcm2835aux UART driver raises the following error if the
maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module
parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS):

(NULL device *): Removing wrong port: a6f80333 != fa20408b

That's because bcm2835aux_serial_probe() retrieves UART line number 1
from the devicetree and stores it in data->uart.port.line, while
serial8250_register_8250_port() instead uses UART line number 0,
which is stored in data->line.

On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line,
which contains the wrong number.  Fix it.

The issue does not occur if the maximum number of 8250 UARTs is >= 2.

Fixes: bdc5f3009580 ("serial: bcm2835: add driver for bcm2835-aux-uart")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.6+
Cc: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/912ccf553c5258135c6d7e8f404a101ef320f0f4.1579175223.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Fix false Tx excessive retries reporting.

commit 9dd631fa99dc0a0dfbd191173bf355ba30ea786a upstream.

The driver reporting  IEEE80211_TX_STAT_ACK is not being handled
correctly. The driver should only report on TSR_TMO flag is not
set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK
is being requested.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/340f1f7f-c310-dca5-476f-abc059b9cd97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: use NULLFUCTION stack on mac80211

commit d579c43c82f093e63639151625b2139166c730fd upstream.

It appears that the drivers does not go into power save correctly the
NULL data packets are not being transmitted because it not enabled
in mac80211.

The driver needs to capture ieee80211_is_nullfunc headers and
copy the duration_id to it's own duration data header.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/610971ae-555b-a6c3-61b3-444a0c1e35b4@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: correct packet types for CTS protect, mode.

commit d971fdd3412f8342747778fb59b8803720ed82b1 upstream.

It appears that the driver still transmits in CTS protect mode even
though it is not enabled in mac80211.

That is both packet types PK_TYPE_11GA and PK_TYPE_11GB both use CTS protect.
The only difference between them GA does not use B rates.

Find if only B rate in GB or GA in protect mode otherwise transmit packets
as PK_TYPE_11A.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/9c1323ff-dbb3-0eaa-43e1-9453f7390dc0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: ensure error return is actually returned

commit 4cc41cbce536876678b35e03c4a8a7bb72c78fa9 upstream.

Currently when the call to prism2sta_ifst fails a netdev_err error
is reported, error return variable result is set to -1 but the
function always returns 0 for success.  Fix this by returning
the error value in variable result rather than 0.

Addresses-Coverity: ("Unused value")
Fixes: 00b3ed168508 ("Staging: add wlan-ng prism2 usb driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: net: fix buffer overflow

commit 4d1356ac12f4d5180d0df345d85ff0ee42b89c72 upstream.

If the length of the socket buffer is 0xFFFFFFFF (max size for an
unsigned int), then payload_len becomes 0xFFFFFFF1 after subtracting 14
(ETH_HLEN).  Then, mdp_len is set to payload_len + 16 (MDP_HDR_LEN)
which overflows and results in a value of 2.  These values for
payload_len and mdp_len will pass current buffer size checks.

This patch checks if derived from skb->len sum may overflow.

The check is based on the following idea:

For any `unsigned V1, V2` and derived `unsigned SUM = V1 + V2`,
`V1 + V2` overflows iif `SUM < V1`.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200116172238.6046-1-andrey.shvetsov@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW

commit eb7a3bb8c955b3694e0e0998413ce1563c02f90c upstream.

commit 8f6244055bd3 ("usb: typec: fusb302: Always provide fwnode for the
port") didn't convert this value from mW to uW when migrating to a new
specification format like it should have.

Fixes: 8f6244055bd3 ("usb: typec: fusb302: Always provide fwnode for the port")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/0da564559af75ec829c6c7e3aa4024f857c91bee.1579529334.git.tommyhebb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: wcove: fix "op-sink-microwatt" default that was in mW

commit 0e64350bf4668d0fbbfec66fd8e637b971b4e976 upstream.

commit 4c912bff46cc ("usb: typec: wcove: Provide fwnode for the port")
didn't convert this value from mW to uW when migrating to a new
specification format like it should have.

Fixes: 4c912bff46cc ("usb: typec: wcove: Provide fwnode for the port")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/d8be32512efd31995ad7d65b27df9d443131b07c.1579529334.git.tommyhebb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: turn off VBUS when leaving host mode

commit 09ed259fac621634d51cd986aa8d65f035662658 upstream.

VBUS should be turned off when leaving the host mode.
Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to
turn off VBUS power.

Fixes: 5f94adfeed97 ("usb: dwc3: core: refactor mode initialization to its own function")
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ir-usb: fix IrLAP framing

commit 38c0d5bdf4973f9f5a888166e9d3e9ed0d32057a upstream.

Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
switched to using the generic write implementation which may combine
multiple write requests into larger transfers. This can break the IrLAP
protocol where end-of-frame is determined using the USB short packet
mechanism, for example, if multiple frames are sent in rapid succession.

Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Cc: stable <stable@vger.kernel.org> # 2.6.35
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ir-usb: fix link-speed handling

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream.

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@vger.kernel.org> # 2.6.27
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ir-usb: add missing endpoint sanity check

commit 2988a8ae7476fe9535ab620320790d1714bdad1d upstream.

Add missing endpoint sanity check to avoid dereferencing a NULL-pointer
on open() in case a device lacks a bulk-out endpoint.

Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using
generic framework") the oops would instead happen on open() if the
device lacked a bulk-in endpoint and on write() if it lacked a bulk-out
endpoint.

Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186

commit e1f236efd9c579a29d7df75aa052127d0d975267 upstream.

Set the MODULE_FIRMWARE for tegra186, it's registered for 124/210 and
ensures the firmware is available at the appropriate time such as in
the initrd, else if the firmware is unavailable the driver fails with
the following errors:

tegra-xusb 3530000.usb: Direct firmware load for nvidia/tegra186/xusb.bin failed with error -2
tegra-xusb 3530000.usb: failed to request firmware: -2
tegra-xusb 3530000.usb: failed to load firmware: -2
tegra-xusb: probe of 3530000.usb failed with error -2

Fixes: 5f9be5f3f899 ("usb: host: xhci-tegra: Add Tegra186 XUSB support")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200120141910.116097-1-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: pci: add ID for the Intel Comet Lake -V variant

commit f5ae8869095552e3396ee3e404f9586cc6a828f0 upstream.

There is one more Comet Lake PCH variant, CML-V, that has
its own PCI ID.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200117093033.48616-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi_91x_usb: fix interface sanity check

commit 3139b180906af43bc09bd3373fc2338a8271d9d9 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable <stable@vger.kernel.org> # 3.15
Cc: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orinoco_usb: fix interface sanity check

commit b73e05aa543cf8db4f4927e36952360d71291d41 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 9afac70a7305 ("orinoco: add orinoco_usb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.35
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: fix non-atomic allocation in completion handler

commit 22cc6b7a1dbb58da4afc539d9b7d470b23a25eea upstream.

USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.

Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Cc: stable <stable@vger.kernel.org> # 5.3
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.16

net/x25: fix nonblocking connect

commit e21dba7a4df4d93da237da65a096084b4f2e87b4 upstream.

This patch fixes 2 issues in x25_connect():

1. It makes absolutely no sense to reset the neighbour and the
connection state after a (successful) nonblocking call of x25_connect.
This prevents any connection from being established, since the response
(call accept) cannot be processed.

2. Any further calls to x25_connect() while a call is pending should
simply return, instead of creating new Call Request (on different
logical channels).

This patch should also fix the "KASAN: null-ptr-deref Write in
x25_connect" and "BUG: unable to handle kernel NULL pointer dereference
in x25_connect" bugs reported by syzbot.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com
Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: autoload modules from the abort path

commit eb014de4fd418de1a277913cba244e47274fe392 upstream.

This patch introduces a list of pending module requests. This new module
list is composed of nft_module_request objects that contain the module
name and one status field that tells if the module has been already
loaded (the 'done' field).

In the first pass, from the preparation phase, the netlink command finds
that a module is missing on this list. Then, a module request is
allocated and added to this list and nft_request_module() returns
-EAGAIN. This triggers the abort path with the autoload parameter set on
from nfnetlink, request_module() is called and the module request enters
the 'done' state. Since the mutex is released when loading modules from
the abort phase, the module list is zapped so this is iteration occurs
over a local list. Therefore, the request_module() calls happen when
object lists are in consistent state (after fulling aborting the
transaction) and the commit list is empty.

On the second pass, the netlink command will find that it already tried
to load the module, so it does not request it again and
nft_request_module() returns 0. Then, there is a look up to find the
object that the command was missing. If the module was successfully
loaded, the command proceeds normally since it finds the missing object
in place, otherwise -ENOENT is reported to userspace.

This patch also updates nfnetlink to include the reason to enter the
abort phase, which is required for this new autoload module rationale.

Fixes: ec7470b834fe ("netfilter: nf_tables: store transaction list locally while requesting module")
Reported-by: syzbot+29125d208b3dae9a7019@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: add __nft_chain_type_get()

commit 826035498ec14b77b62a44f0cb6b94d45530db6f upstream.

This new helper function validates that unknown family and chain type
coming from userspace do not trigger an out-of-bound array access. Bail
out in case __nft_chain_type_get() returns NULL from
nft_chain_parse_hook().

Fixes: 9370761c56b6 ("netfilter: nf_tables: convert built-in tables/chains to chain types")
Reported-by: syzbot+156a04714799b1d480bc@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: use bitmap infrastructure completely

commit 32c72165dbd0e246e69d16a3ad348a4851afd415 upstream.

The bitmap allocation did not use full unsigned long sizes
when calculating the required size and that was triggered by KASAN
as slab-out-of-bounds read in several places. The patch fixes all
of them.

Reported-by: syzbot+fabca5cbf5e54f3fe2de@syzkaller.appspotmail.com
Reported-by: syzbot+827ced406c9a1d9570ed@syzkaller.appspotmail.com
Reported-by: syzbot+190d63957b22ef673ea5@syzkaller.appspotmail.com
Reported-by: syzbot+dfccdb2bdb4a12ad425e@syzkaller.appspotmail.com
Reported-by: syzbot+df0d0f5895ef1f41a65b@syzkaller.appspotmail.com
Reported-by: syzbot+b08bd19bb37513357fd4@syzkaller.appspotmail.com
Reported-by: syzbot+53cdd0ec0bbabd53370a@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-ioctl.c: zero reserved fields for S/TRY_FMT

commit ee8951e56c0f960b9621636603a822811cef3158 upstream.

v4l2_vbi_format, v4l2_sliced_vbi_format and v4l2_sdr_format
have a reserved array at the end that should be zeroed by drivers
as per the V4L2 spec. Older drivers often do not do this, so just
handle this in the core.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libertas: Fix two buffer overflows at parsing bss descriptor

commit e5e884b42639c74b5b57dc277909915c0aefc8bb upstream.

add_ie_rates() copys rates without checking the length
in bss descriptor from remote AP.when victim connects to
remote attacker, this may trigger buffer overflow.
lbs_ibss_join_existing() copys rates without checking the length
in bss descriptor from remote IBSS node.when victim connects to
remote attacker, this may trigger buffer overflow.
Fix them by putting the length check before performing copy.

This fix addresses CVE-2019-14896 and CVE-2019-14897.
This also fix build warning of mixed declarations and code.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Wen Huang <huangwenabc@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Prevent tx watchdog timeout

commit 686f85d71d095f1d26b807e23b0f0bfd22042c45 upstream.

Section 5.5.3.2 of the datasheet says,

    If FIFO Underrun, Byte Count Mismatch, Excessive Collision, or
    Excessive Deferral (if enabled) errors occur, transmission ceases.

In this situation, the chip asserts a TXER interrupt rather than TXDN.
But the handler for the TXDN is the only way that the transmit queue
gets restarted. Hence, an aborted transmission can result in a watchdog
timeout.

This problem can be reproduced on congested link, as that can result in
excessive transmitter collisions. Another way to reproduce this is with
a FIFO Underrun, which may be caused by DMA latency.

In event of a TXER interrupt, prevent a watchdog timeout by restarting
transmission.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Fix CAM initialization

commit 772f66421d5aa0b9f256056f513bbc38ac132271 upstream.

Section 4.3.1 of the datasheet says,

    This bit [TXP] must not be set if a Load CAM operation is in
    progress (LCAM is set). The SONIC will lock up if both bits are
    set simultaneously.

Testing has shown that the driver sometimes attempts to set LCAM
while TXP is set. Avoid this by waiting for command completion
before and after giving the LCAM command.

After issuing the Load CAM command, poll for !SONIC_CR_LCAM rather than
SONIC_INT_LCD, because the SONIC_CR_TXP bit can't be used until
!SONIC_CR_LCAM.

When in reset mode, take the opportunity to reset the CAM Enable
register.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Fix command register usage

commit 27e0c31c5f27c1d1a1d9d135c123069f60dcf97b upstream.

There are several issues relating to command register usage during
chip initialization.

Firstly, the SONIC sometimes comes out of software reset with the
Start Timer bit set. This gets logged as,

    macsonic macsonic eth0: sonic_init: status=24, i=101

Avoid this by giving the Stop Timer command earlier than later.

Secondly, the loop that waits for the Read RRA command to complete has
the break condition inverted. That's why the for loop iterates until
its termination condition. Call the helper for this instead.

Finally, give the Receiver Enable command after clearing interrupts,
not before, to avoid the possibility of losing an interrupt.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Quiesce SONIC before re-initializing descriptor memory

commit 3f4b7e6a2be982fd8820a2b54d46dd9c351db899 upstream.

Make sure the SONIC's DMA engine is idle before altering the transmit
and receive descriptors. Add a helper for this as it will be needed
again.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Fix receive buffer replenishment

commit 89ba879e95582d3bba55081e45b5409e883312ca upstream.

As soon as the driver is finished with a receive buffer it allocs a new
one and overwrites the corresponding RRA entry with a new buffer pointer.

Problem is, the buffer pointer is split across two word-sized registers.
It can't be updated in one atomic store. So this operation races with the
chip while it stores received packets and advances its RRP register.
This could result in memory corruption by a DMA write.

Avoid this problem by adding buffers only at the location given by the
RWP register, in accordance with the National Semiconductor datasheet.

Re-factor this code into separate functions to calculate a RRA pointer
and to update the RWP.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Improve receive descriptor status flag check

commit 94b166349503957079ef5e7d6f667f157aea014a upstream.

After sonic_tx_timeout() calls sonic_init(), it can happen that
sonic_rx() will subsequently encounter a receive descriptor with no
flags set. Remove the comment that says that this can't happen.

When giving a receive descriptor to the SONIC, clear the descriptor
status field. That way, any rx descriptor with flags set can only be
a newly received packet.

Don't process a descriptor without the LPKT bit set. The buffer is
still in use by the SONIC.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Avoid needless receive descriptor EOL flag updates

commit eaabfd19b2c787bbe88dc32424b9a43d67293422 upstream.

The while loop in sonic_rx() traverses the rx descriptor ring. It stops
when it reaches a descriptor that the SONIC has not used. Each iteration
advances the EOL flag so the SONIC can keep using more descriptors.
Therefore, the while loop has no definite termination condition.

The algorithm described in the National Semiconductor literature is quite
different. It consumes descriptors up to the one with its EOL flag set
(which will also have its "in use" flag set). All freed descriptors are
then returned to the ring at once, by adjusting the EOL flags (and link
pointers).

Adopt the algorithm from datasheet as it's simpler, terminates quickly
and avoids a lot of pointless descriptor EOL flag changes.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Fix receive buffer handling

commit 9e311820f67e740f4fb8dcb82b4c4b5b05bdd1a5 upstream.

The SONIC can sometimes advance its rx buffer pointer (RRP register)
without advancing its rx descriptor pointer (CRDA register). As a result
the index of the current rx descriptor may not equal that of the current
rx buffer. The driver mistakenly assumes that they are always equal.
This assumption leads to incorrect packet lengths and possible packet
duplication. Avoid this by calling a new function to locate the buffer
corresponding to a given descriptor.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Fix interface error stats collection

commit 427db97df1ee721c20bdc9a66db8a9e1da719855 upstream.

The tx_aborted_errors statistic should count packets flagged with EXD,
EXC, FU, or BCM bits because those bits denote an aborted transmission.
That corresponds to the bitmask 0x0446, not 0x0642. Use macros for these
constants to avoid mistakes. Better to leave out FIFO Underruns (FU) as
there's a separate counter for that purpose.

Don't lump all these errors in with the general tx_errors counter as
that's used for tx timeout events.

On the rx side, don't count RDE and RBAE interrupts as dropped packets.
These interrupts don't indicate a lost packet, just a lack of resources.
When a lack of resources results in a lost packet, this gets reported
in the rx_missed_errors counter (along with RFO events).

Don't double-count rx_frame_errors and rx_crc_errors.

Don't use the general rx_errors counter for events that already have
special counters.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Use MMIO accessors

commit e3885f576196ddfc670b3d53e745de96ffcb49ab upstream.

The driver accesses descriptor memory which is simultaneously accessed by
the chip, so the compiler must not be allowed to re-order CPU accesses.
sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should
have done so too but was overlooked.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Clear interrupt flags immediately

commit 5fedabf5a70be26b19d7520f09f12a62274317c6 upstream.

The chip can change a packet's descriptor status flags at any time.
However, an active interrupt flag gets cleared rather late. This
allows a race condition that could theoretically lose an interrupt.
Fix this by clearing asserted interrupt flags immediately.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Add mutual exclusion for accessing shared state

commit 865ad2f2201dc18685ba2686f13217f8b3a9c52c upstream.

The netif_stop_queue() call in sonic_send_packet() races with the
netif_wake_queue() call in sonic_interrupt(). This causes issues
like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out".
Fix this by disabling interrupts when accessing tx_skb[] and next_tx.
Update a comment to clarify the synchronization properties.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

readdir: be more conservative with directory entry names

commit 2c6b7bcd747201441923a0d3062577a8d1fbd8f8 upstream.

Commit 8a23eb804ca4 ("Make filldir[64]() verify the directory entry
filename is valid") added some minimal validity checks on the directory
entries passed to filldir[64]().  But they really were pretty minimal.

This fleshes out at least the name length check: we used to disallow
zero-length names, but really, negative lengths or oevr-long names
aren't ok either.  Both could happen if there is some filesystem
corruption going on.

Now, most filesystems tend to use just an "unsigned char" or similar for
the length of a directory entry name, so even with a corrupt filesystem
you should never see anything odd like that.  But since we then use the
name length to create the directory entry record length, let's make sure
it actually is half-way sensible.

Note how POSIX states that the size of a path component is limited by
NAME_MAX, but we actually use PATH_MAX for the check here.  That's
because while NAME_MAX is generally the correct maximum name length
(it's 255, for the same old "name length is usually just a byte on
disk"), there's nothing in the VFS layer that really cares.

So the real limitation at a VFS layer is the total pathname length you
can pass as a filename: PATH_MAX.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

do_last(): fetch directory ->i_mode and ->i_uid before it's too late

commit d0cb50185ae942b03c4327be322055d622dc79f6 upstream.

may_create_in_sticky() call is done when we already have dropped the
reference to dir.

Fixes: 30aba6656f61e (namei: allow restricted O_CREAT of FIFOs and regular files)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net, sk_msg: Don't check if sock is locked when tearing down psock

commit 58c8db929db1c1d785a6f5d8f8692e5dbcc35e84 upstream.

As John Fastabend reports [0], psock state tear-down can happen on receive
path *after* unlocking the socket, if the only other psock user, that is
sockmap or sockhash, releases its psock reference before tcp_bpf_recvmsg
does so:

 tcp_bpf_recvmsg()
  psock = sk_psock_get(sk)                         <- refcnt 2
  lock_sock(sk);
  ...
                                  sock_map_free()  <- refcnt 1
  release_sock(sk)
  sk_psock_put()                                   <- refcnt 0

Remove the lockdep check for socket lock in psock tear-down that got
introduced in 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during
tear down").

[0] https://lore.kernel.org/netdev/5e25dc995d7d_74082aaee6e465b441@john-XPS-13-9370.notmuch/

Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down")
Reported-by: syzbot+d73682fcf7fee6982fe3@syzkaller.appspotmail.com
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: support output_mark for offload ESP packets

commit 4e4362d2bf2a49ff44dbbc9585207977ca3d71d0 upstream.

Commit 9b42c1f179a6 ("xfrm: Extend the output_mark") added output_mark
support but missed ESP offload support.

xfrm_smark_get() is not called within xfrm_input() for packets coming
from esp4_gro_receive() or esp6_gro_receive(). Therefore call
xfrm_smark_get() directly within these functions.

Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking.")
Signed-off-by: Ulrich Weber <ulrich.weber@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/userptr: fix size calculation

commit ecc4d2a52df65479de5e333a9065ed02202a400f upstream.

If we create a rather large userptr object(e.g 1ULL << 32) we might
shift past the type-width of num_pages: (int)num_pages << PAGE_SHIFT,
resulting in a totally bogus sg_table, which fortunately will eventually
manifest as:

gen8_ppgtt_insert_huge:463 GEM_BUG_ON(iter->sg->length < page_size)
kernel BUG at drivers/gpu/drm/i915/gt/gen8_ppgtt.c:463!

v2: more unsigned long
    prefer I915_GTT_PAGE_SIZE

Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117132413.1170563-2-matthew.auld@intel.com
(cherry picked from commit 8e78871bc1e5efec22c950d3fd24ddb63d4ff28a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix potential SKB leak on TXQ TX

commit df2378ab0f2a9dd4cf4501268af1902cc4ebacd8 upstream.

When we transmit after TXQ dequeue, we aren't paying attention to
the return value of the transmit functions, leading to a potential
SKB leak.

Refactor the code a bit (and rename ..._tx to ..._tx_sta) to check
for this happening.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix SKB leak on invalid queue

commit b9f726c94224e863d4d3458dfec2e7e1284a39ce upstream.

It used to be the case that if we got here, we wouldn't warn
but instead allocate the queue (DQA). With using the mac80211
TXQs model this changed, and we really have nothing to do with
the frame here anymore, hence the warning now.

However, clearly we missed in coding & review that this is now
a pure error path and leaks the SKB if we return 0 instead of
an indication that the SKB needs to be freed. Fix this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: xen: Ordered comparison of function pointers

commit d0695e2351102affd8efae83989056bc4b275917 upstream.

Just as commit 0566e40ce7 ("tracing: initcall: Ordered comparison of
function pointers"), this patch fixes another remaining one in xen.h
found by clang-9.

In file included from arch/x86/xen/trace.c:21:
In file included from ./include/trace/events/xen.h:475:
In file included from ./include/trace/define_trace.h:102:
In file included from ./include/trace/trace_events.h:473:
./include/trace/events/xen.h:69:7: warning: ordered comparison of function \
pointers ('xen_mc_callback_fn_t' (aka 'void (*)(void *)') and 'xen_mc_callback_fn_t') [-Wordered-compare-function-pointers]
                    __field(xen_mc_callback_fn_t, fn)
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/trace/trace_events.h:421:29: note: expanded from macro '__field'
                                ^
./include/trace/trace_events.h:407:6: note: expanded from macro '__field_ext'
                                 is_signed_type(type), filter_type);    \
                                 ^
./include/linux/trace_events.h:554:44: note: expanded from macro 'is_signed_type'
                                              ^

Fixes: c796f213a6934 ("xen/trace: add multicall tracing")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: RDMA/isert: Fix a recently introduced regression related to logout

commit 04060db41178c7c244f2c7dcd913e7fd331de915 upstream.

iscsit_close_connection() calls isert_wait_conn(). Due to commit
e9d3009cb936 both functions call target_wait_for_sess_cmds() although that
last function should be called only once. Fix this by removing the
target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling
isert_wait_conn() after target_wait_for_sess_cmds().

Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session").
Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org
Reported-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct7802) Fix non-working alarm on voltages

commit e51a7dda299815e92f43960d620cdfc8dfc144f2 upstream.

No alarm is reported by /sys/.../inX_alarm

In detail:

The SMI Voltage status register is the only register giving a status
for voltages, but it does not work like the non-SMI status registers
used for temperatures and fans.
A bit is set for each input crossing a threshold, in both direction,
but the "inside" or "outside" limits info is not available.
Also this register is cleared on read.
Note : this is not explicitly spelled out in the datasheet, but from
experiment.
As a result if an input is crossing a threshold (min or max in any
direction), the alarm is reported only once even if the input is
still outside limits. Also if the alarm for another input is read
before the one of this input, no alarm is reported at all.

Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
Link: https://lore.kernel.org/r/5de0f566.tBga5POKAgHlmd0p%gilles.buloz@kontron.com
Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct7802) Fix voltage limits to wrong registers

commit 7713e62c8623c54dac88d1fa724aa487a38c3efb upstream.

in0 thresholds are written to the in2 thresholds registers
in2 thresholds to in3 thresholds
in3 thresholds to in4 thresholds
in4 thresholds to in0 thresholds

Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%gilles.buloz@kontron.com
Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hsr: Fix a compilation error

commit 80892772c4edac88c538165d26a0105f19b61c1c upstream.

A compliation error happen when building branch 5.5-rc7

In file included from net/hsr/hsr_main.c:12:0:
net/hsr/hsr_main.h:194:20: error: two or more data types in declaration specifiers
 static inline void void hsr_debugfs_rename(struct net_device *dev)

So Removed one void.

Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed")
Signed-off-by: xiaofeng.yan <yanxiaofeng7@jd.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: gpio: Fix uninitialized gpio label for fwnode based probe

commit 90a8e82d3ca8c1f85ac63f4a94c9b034f05af4ee upstream.

When switching to using generic LED name composition mechanism via
devm_led_classdev_register_ext() API the part of code initializing
struct gpio_led's template name property was removed alongside.
It was however overlooked that the property was also passed to
devm_fwnode_get_gpiod_from_child() in place of "label" parameter,
which when set to NULL, results in gpio label being initialized to '?'.

It could be observed in debugfs and failed to properly identify
gpio association with LED consumer.

Fix this shortcoming by updating the GPIO label after the LED is
registered and its final name is known.

Fixes: d7235f5feaa0 ("leds: gpio: Use generic support for composing LED names")
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
[fixed comment]
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

readdir: make user_access_begin() use the real access range

commit 3c2659bd1db81ed6a264a9fc6262d51667d655ad upstream.

In commit 9f79b78ef744 ("Convert filldir[64]() from __put_user() to
unsafe_put_user()") I changed filldir to not do individual __put_user()
accesses, but instead use unsafe_put_user() surrounded by the proper
user_access_begin/end() pair.

That make them enormously faster on modern x86, where the STAC/CLAC
games make individual user accesses fairly heavy-weight.

However, the user_access_begin() range was not really the exact right
one, since filldir() has the unfortunate problem that it needs to not
only fill out the new directory entry, it also needs to fix up the
previous one to contain the proper file offset.

It's unfortunate, but the "d_off" field in "struct dirent" is _not_ the
file offset of the directory entry itself - it's the offset of the next
one.  So we end up backfilling the offset in the previous entry as we
walk along.

But since x86 didn't really care about the exact range, and used to be
the only architecture that did anything fancy in user_access_begin() to
begin with, the filldir[64]() changes did something lazy, and even
commented on it:

/*
 * Note! This range-checks 'previous' (which may be NULL).
 * The real range was checked in getdents
 */
if (!user_access_begin(dirent, sizeof(*dirent)))
goto efault;

and it all worked fine.

But now 32-bit ppc is starting to also implement user_access_begin(),
and the fact that we faked the range to only be the (possibly not even
valid) previous directory entry becomes a problem, because ppc32 will
actually be using the range that is passed in for more than just "check
that it's user space".

This is a complete rewrite of Christophe's original patch.

By saving off the record length of the previous entry instead of a
pointer to it in the filldir data structures, we can simplify the range
check and the writing of the previous entry d_off field.  No need for
any conditionals in the user accesses themselves, although we retain the
conditional EINTR checking for the "was this the first directory entry"
signal handling latency logic.

Fixes: 9f79b78ef744 ("Convert filldir[64]() from __put_user() to unsafe_put_user()")
Link: https://lore.kernel.org/lkml/a02d3426f93f7eb04960a4d9140902d278cab0bb.1579697910.git.christophe.leroy@c-s.fr/
Link: https://lore.kernel.org/lkml/408c90c4068b00ea8f1c41cca45b84ec23d4946b.1579783936.git.christophe.leroy@c-s.fr/
Reported-and-tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>