libweston/launcher-weston-launch: Silence unused-function warning

libweston/launcher-weston-launch.c:58:1: warning: unused function
'is_drm_master' [-Wunused-function]
is_drm_master(int drm_fd)
^

Warning produced by Clang 3.8.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>

libweston: Silence tautological-compare warning

libweston/compositor.c:5023:14: warning: comparison of unsigned enum
expression < 0 is always false [-Wtautological-compare]
        if (backend < 0 || backend >= ARRAY_LENGTH(backend_map))
                    ~~~~~~~ ^ ~

Warning produced by Clang 3.8.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>

shared/image: Silence maybe-uninitialized warning

shared/image-loader.c: In function 'load_image':
shared/image-loader.c:434:12: warning: 'image' may be used uninitialized
in this function [-Wmaybe-uninitialized]
  } else if (!image) {
              ^

Warning produced by GCC 5.3 and 6.1, with -Og.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>

gl-renderer: Silence maybe-uninitialized warning

libweston/gl-renderer.c: In function 'compress_bands':
libweston/gl-renderer.c:481:6: warning: 'merged' may be used
uninitialized in this function [-Wmaybe-uninitialized]
   if (!merged) {
         ^

Warning produced by GCC 5.3 and 6.1, with -Og.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>

libweston/compositor-rdp: fix no-break space U+A0 (U8+C2A0)

There is a UTF-8 no-break space (U+A0, U8+C2A0) in the definition of
macro NSC_RESET in the case of  1.2.2 <= FreeRDP < 2.0.

This is causing build issues (\302 is 0xC2, \240 is 0xA0):
    http://autobuild.buildroot.net/results/f49/f49a9cbb7bdc5d9e05dcf0a20bd83f059e234e74/build-end.log

Fix that by using a plain, boring space U+20.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>

clients/simple-dmabuf-v4l: Port to xdg_shell unstable v6

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

clients/simple-dmabuf-intel: Port to xdg_shell unstable v6

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

clients/simple-damage: Port to xdg_shell unstable v6

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

clients/simple-shm: Port to xdg_shell unstable v6

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

clients/simple-egl: Port to xdg_shell unstable v6

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

toytoolkit: Port to xdg_shell unstable v6

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

libweston-desktop: Drop (wrongly named) new_buffer in committed

Instead we store the buffer move and just use it when the signal is
fired.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

libweston-desktop/xdg_shell_v6: Check for buffer directly in committed

This is what we are interested in for real, and new_buffer is wrongly
named.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

libweston-desktop: Implement xdg_shell_v6

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1210

Makefile.am: Include files built for libweston-desktop in BUILT_SOURCES

Without this make distcheck fails would we ever add any other built
sources to libweston-desktop. Also remove the now redundant leftover
nodist sources from desktop-shell source list.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

libweston-desktop: Fix libweston-desktop.pc

Also remove ${pkgincludedir} to be on par with libweston.pc.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

desktop-shell: Port to libweston-desktop

All the shell protocol details, Xwayland glue and popups (and their
grab) are now handled in libweston-desktop.
Fullscreen methods (for wl_shell) are removed for now.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1209

xwayland: Introduce a private struct for XWayland interface

libweston-desktop implements this private struct.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1208

Introduce libweston-desktop

libweston-desktop is an abstraction library for compositors wanting to
support desktop-like shells.

The API is designed from xdg_shell features, as it will eventually be
the recommended shell for modern applications to use.
In the future, adding new shell protocols support will be easier, as
limited to libweston-desktop.

The library versioning is the same as libweston. If one of them break
ABI compatibility, the other will too.

The compositor will only ever see toplevel surfaces (“windows”), with
all the other being internal implementation details.
Thus, popups and associated grabs are handled entirely in
libweston-desktop.
Xwayland special surfaces (override-redirect) are special-cased to a
dedicated layer, as the compositor should not know about them.

All the shell error checking is taken care of too, as well as some
specification rules (e.g. sizes constraint for maximized and fullscreen
surfaces).

All the compositor has to do is define a few callbacks in the interface
struct, and manage toplevel surfaces.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1207

libweston: Rename weston_surface::configure to ::committed

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1246

input: Add helpers for all keyboard/pointer/touch events

These are useful to implement grabs.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1245

fullscreen-shell: Ensure that fs surface is presented on all outputs

When no outputs are present, and no output resource is given,
a fullscreen surface won't get configured. This code ensures
that surface is properly presented on all outputs that get
connected after a surface has been created, but only if no
output resource was previously given.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

libweston: fix animation crash when a view has no output assigned

This fixes a crash in animation related code where weston
would crash in weston_view_animation_create when the
view had no output assigned.

This makes sure that animation gets created and released
immediately, so done and reset callbacks still get called
properly.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: put a '{' on the right line.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

configure: bump Wayland requirement to 1.11.90

Commit 4ef719c416c4e455b6b29b7c1e60df1d3fa26fe4
"libweston: Implement wl_output version 3 (release request)"
depends on the Wayland commit bad9dc5186e46ab92e1680d1f0ea4a4d4f0f7211
"protocol: Add release (destructor) request to wl_output"

Reported-by: Armin Krezović <krezovic.armin@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

libweston: Implement wl_output version 3 (release request)

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

gl-renderer: Make dummy surface current after all outputs are gone

When all outputs are gone, there are no current read/write
surfaces associated with a context. This makes the previously
created dummy surface current until an output gets attached
to avoid any potential crashes.

v2:

- Remove unnecessary objects

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor: Mark all views as dirty when a new output is assigned

When all outputs are gone and views were created before they
were gone, such views would have no output object assigned and
nothing would assign it later. This makes sure all views are
set as dirty, so they can get an output assigned when an
output gets plugged in, if they didn't have any output assigned.

This change also works when a new output is added even if there already
are outputs in use. A view may be partly off-screen. If the new output
appears at a position where it overlaps an existing view, that view
should get updated.

It is enough to process only the main view_list, because views not on
that list are not shown for the moment and so do not need an immediate
update. Instead, they will get updated later as needed because making an
off-list view to go on-list inherently requires calling
weston_view_geometry_dirty().

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
[Pekka: addes commit msg paragrapha 2 and 3.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor-drm: Use non-cast functions to retrieve backend and output objects

This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.

v2:

- Remove unneeded cast
- Remove unneeded line breaks

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Switch to use safe_strtoint instead of strtol

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

Add safe_strtoint() helper

Adds a safe strtol helper function, modeled loosely after Wayland
scanner's strtouint.  This encapsulates the various quirks of strtol
behavior, and streamlines the interface to just handling base-10 numbers
with a simple true/false error indicator and a uint32_t return by
reference.

Test cases are loosely derived from an earlier patch by Imran Zaman.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

option-parser: Improve error checking for strtol call

Make the error checking consistent with other strtol() calls.

Note that since strtol(nptr, &endptr) sets endptr == nptr if there were
no digits, this catches the case where the string was blank, so there's
no need to test *value != '\0'.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

xwayland: Improve error checking for strtol call

This updates the error checking for the strtol() call in xwayland's
create_lockfile to match other cases.  C.f. cbc05378 and other recent
patches.

A notable difference here is that the existing error checking was
verifying that exactly 10 digits were being read from the lock file,
but the fact that it's 10 digits is just an implementation detail for
how we're writing it.  The pid could be a shorter number of digits, and
would just be space-padded on the left.

This change allows the file to contain any number of digits, but it
can't be blank, all of the digits must be numeric, and the resulting
number must be within the accepted range.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

Standardize error checking for strtol calls

This tightens up the strtol() error checking in several places where it
is used for parsing environment variables, and in the backlight
interface that is reading numbers from files under /sys/class/backlight.
All of these uses are expecting strings containing decimal numbers and
nothing else, so the error checking can all be tightened up and made
consistent with other strtol() calls.

This follows the error checking style used in Wayland
(c.f. wayland-client.c and scanner.c) and c.f. commit cbc05378.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

compositor-x11: Use non-cast functions to retrieve backend and output objects

This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-wayland: Use non-cast functions to retrieve backend and output objects

This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-rdp: Use non-cast functions to retrieve backend and output objects

This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-headless: Use non-cast functions to retrieve backend and output objects

This uses container_of instead of explicit cast to retrieve
backend and output objects from generic weston_backend and
weston_output pointers.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-drm: Do not exit when there are no outputs left

When there are no outputs left after a hotplug event, weston
will terminate. This isn't desired when trying to get weston
to work with zero outputs.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

compositor-drm: Do not return an error when no connectors are configured

Returning an error when there are no connectors results in
weston terminating after that. That's not expected when
trying to get weston to start with zero drm outputs.

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

libweston: fix major in libweston.pc

Renames forgotten in "libweston: use new versioning scheme".

Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Quentin Glidic <sardemff7+git@sardemff7.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

automake: list static libraries before the shared ones

The linker processes those in the order that they are given. Thus
as-it we can get unresolved symbols.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

libweston: remove pkgincludedir variable from libweston.pc

Common practise it to provide the includes directly into Cflags, hence
the variable is not needed and we can remove it.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

libweston: use new versioning scheme

Use the documented libweston-$major.so.0.$minor.$patch scheme.

An (almost) identical one is used by GLIB, GDK{2,3}, QT5, json-glib and
others.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

README: Document versioning scheme, forward compatibility

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

compositor: Extend compositor user data

This patch makes the compositor user data a structure
which can be expanded with new fields when necessary.

v2:

Don't export to_wet_compositor

Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

include stdint.h for int32_t/uint32_t

Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>

gitignore: Ignore weston-confine client

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Re-apply "config-parser: Catch negative numbers assigned to unsigned config values"

[With hexadecimal color values now handled via their own routine,
re-introduce the negative unsigned numbers fix.]

strtoul() has a side effect that when given a string representing a
negative number, it treats it as a high value hexadecimal.  IOW,
strtoul("-42", &val) sets val to 0xffffffd6.  This could potentially
result in unintended surprise behaviors.

Catch this by using strtol() and then manually check for the negative
value.  This logic is modelled after Wayland's strtouint().

Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX].  The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.

Also add a test case for negative numbers that catches this error
condition.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

config-parser: Add weston_config_section_get_color

Previously weston_config_section_get_uint was serving dual purpose for
parsing both unsigned decimal integer values (ids, counts, seconds,
etc.)  and hexadecimal values (colors), by relying on strtoul's
auto-detection mechanism.

However, this usage is unable to catch certain kinds of error
conditions, such as specifying a negative number where an unsigned
should be used.  And for colors in particular, it would misparse hex
values if the leading 0x was omitted.  E.g. "background-color=99999999"
would render a near-black background (effectively 0x05f5e0ff) instead of
medium grey, and "background-color=ffffffff" would be treated as an
error rather than white.  "background-color=0x01234567",
"background-color=01234567", and "background-color=1234567" each
resulted in the value being parsed as hexadecimal, octal, and decimal
respectively, resulting in colors 0x01234567, 0x00053977, and 0x0012d687
being displayed.

This new routine forces hexadecimal to be used in all cases when parsing
color values, so "0x01234567" and "01234567" result in the same color
value, "99999999" is grey, and "ffffffff" is white.  It also requires
exactly 8 or 10 digits (other lengths likely indicate typos), or the
value "0" (black).

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

clients/confine: Toggle maximized state with 'm'

In order to test warping when pointer confinemen region changes, add
key binding to the maximized state without using the mouse.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

clients/confine: Add option for using a more complex confine region

By passing --complex-confine-region confine will draw an area looking
like a strange H in half transparent gray. This region will act as the
confine region when pointer confinement is activated (by right clicking).

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>

window: Add API for manually set confine region

We can use this to test more complex confine regions.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

clients/confine: Reset motion lines on Backspace

Clear the white lines that is drawn by pointer motions. It makes it
easier to debug pointer movements as one won't need to restart confine
just to get a clean plate.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

input: Support non-rectangular pointer confine regions

This patch adds support for when the resulting pointer confinement region
is not a rectangle.

Support for this is implemented by converting the rectangles of the
region into the regions outer border. Pointer motions are then clamped
to these borders in order to not escape the confinement region.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

clients/confine: Use pointer confinement to confine drawed line

Use pointer confinement to make the line drawing not go outside the
drawing area. It is toggled with the letf pointer button.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

clients: Fork clickdot as confine

The new confine client will be used to demonstrate pointer confinement.
It is so far identical to clickdot except that it doesn't respond to
clicks.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>

clients/resizor: Use pointer locking for resizing window

Resizes the window using pointer locking when holding the left pointer
button down. The pointer lock cursor position hint is used to warp the
pointer to the same position relative to the bottom right corner.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

clients: Add API for pointer locking and pointer confinement

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Implement pointer locking and confinement

This patch implements the wp_pointer_constraints protocol used for
locking or confining a pointer. It consists of a new global object with
two requests; one for locking the surface to a position, one for
confining the pointer to a given region.

In this patch, only the locking part is fully implemented as in
specified in the protocol, while confinement is only implemented for
when the union of the passed region and the input region of the confined
surface is a single rectangle.

Note that the pointer constraints protocol is still unstable and as
such has the unstable protocol naming conventions applied.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniels@collabora.com>

input: Split out pointer button sending from grab handler

We'll use it elsewhere later.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

input: Split out motion sending from default grab

We'll reuse it later.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

weston-pointer: Add destroy signal

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

compositor: Pass both surface and seat in activation signal

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

compositor: Add surface commit signal

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Implement the relative pointer protocol

A wp_relative_pointer object is an extension to the wl_pointer interface
only used for emitting relative pointer events. It will only emit events
when the parent pointer has focus.

To get a relative pointer object, use the get_relative_pointer request
of the global wp_relative_pointer_manager object.

The relative pointer protocol is currently an unstable protocol, so
unstable protocol naming conventions has been applied.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

input: Provide microsecond timestamps in motion events

Provide timestamps with microsecond granularity if the backend can
provide it. Backends that can't should set it to 0.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

libinput: Expose unaccelerated motion deltas in motion event struct

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>

compositor: Keep track of what views were activated by clicking

Adds a weston_view_activate() that can be passed an additional active
flag WESTON_ACTIVATE_CLICKED, that the shell passes when a view was
activated by clicking.

This allows shell-independent components implement heuristics depending
on how a view was activated.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>

desktop-shell: Pass a flag bitmask instead of bool to activate()

Although it currently only has one available flag, but that'll change.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>

desktop-shell: Make activate() take a view instead of surface

In preparation for further refactorings.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>

desktop-shell: Change switcher to track views

Preparation for future refactorings.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>

desktop-shell: Track the black surface by its view

In preparation for further refactoring.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>

input: Activate view no matter the keyboard focus

Activate a view even though it effectively may already be active.
Without this, in later patches, it won't be possibe to track what view
was activated by clicking last, as a view which surface already had
keyboard focus, won't be activated.

To keep avoiding sending xdg_surface.configure events, only change the
keyboard focus if the focus actually changed.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>

automake: add missing git-version.h dependency

compositor/main.c depends on the header, while the dependency isn't
specified. Thus depending on the order of how things are build we could
get a build failure.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

automake: list the the builddir include before the srcdir

Otherwise we'll pick up the stale (in-tree) generated source(s) over the
fresh (out-of-tree) ones.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

shared/platform.h: remove the local EGL platform (re)definitions

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

gl-renderer: remove local EGL platform (re)definitions

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

weston-egl-ext.h: add EGL platform definitions

Will allow us to consolidate the multiple definitions through the tree.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

clients/simple-egl: use weston_check_egl_extension over strstr

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

clients/nested: use weston_check_egl_extension over strstr

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

shared/platform.h: use weston_check_egl_extension over strstr

The later can give false positives.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

gl-renderer: move check_extension() to shared/

... prefixing it with a "weston_". This way we can reuse it across the
board, instead of the current strstr. The latter of which can give us
false positives, thus it will be resolved with next commit(s).

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

libweston: don't install shared/platform.h

The header contains a set of extension check (helpers), which do not
provide any compositor related functionality and are not required for
using libweston.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

shared/platform.h: add missing stdbool.h include

Required by the bool type, used through the header.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

simple-egl: remove incomplete EGL_EXT_buffer_age definition

A more complete alternative is already provided by the weston-egl-ext.h
header. The latter of which we already include.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

gl-renderer: remove EGL_EXT_image_dma_buf_import guards

We provide a (workaround) definition in weston-egl-ext.h, thus we don't
need any guards.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

weston-egl-ext.h: add GL_EXT_unpack_subimage definitions

... and use it in gl-renderer.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

weston-egl-ext.h: add EGL_MESA_configless_context definitions

... and use it in gl-renderer.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

weston-egl-ext.h: add EGL_EXT_swap_buffers_with_damage definitions

... and use it from simple-egl and gl-renderer.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

client/nested: reuse weston-egl-ext.h declarations

Rather than introducing a local copy of the
EGL_WL_create_wayland_buffer_from_image (re)definition, just use the
local header.

This also gives us access to EGL_WL_bind_wayland_display which is also
used in the client, yet the C file is missing a fall-back definition.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Revert "config-parser: Catch negative numbers assigned to unsigned config values"

The reduction in range limits does have an effect for color values,
which are expressed as hexadecimal values from 0x00000000 to
0xFFFFFFFF.  By limiting the range to INT_MAX, color values of
0x80000000 and up are in fact lost.

This reverts commit 6351fb08c2e302f8696b2022830e5317e7219c39.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Yong Bakos <ybakos@humanoriented.com>

systemd: Also force base-10 for the strtol() call

This call is used to parse a time value expressed in usec's, which is
always decimal.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>

Require base-10 for strtol() calls

The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.

This change is an expansion of f6051cbab84c0e577473b67f0585c0f329eb80fe
to cover the remaining strtol() calls in Weston, where the routine is
being used to read fds and pids - which are always expressed in base-10.
It also changes the calls in config-parser, used by
weston_config_section_get_int(), which in turn is being used to read
scales, sizes, times, rates, and delays; these are all expressed in
base-10 numbers only.

The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line.  Also, by making the code
consistent with other usages of strtol, it may make it possible to
factor out the common code in the future.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

Include space in 'if ('

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>

config-parser: Catch negative numbers assigned to unsigned config values

strtoul() has a side effect that when given a string representing a
negative number, it returns a negated version as the value, and does not
flag an error.  IOW, strtoul("-42", &val) sets val to 42.  This could
potentially result in unintended surprise behaviors, such as if one were
to inadvertantly set a config param to -1 expecting that to disable it,
but with the result of setting the param to 1 instead.

Catch this by using strtol() and then manually check for the negative
value.  This logic is modelled after Wayland's strtouint().

Note that this change unfortunately reduces the range of parseable
numbers from [0,UINT_MAX] to [0,INT_MAX].  The current users of
weston_config_section_get_uint() are anticipating numbers far smaller
than either of these limits, so the change is believed to have no impact
in practice.

Also add a test case for negative numbers that catches this error
condition.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

rdp: Check for non-digits and errno in strtol call

Improve error checking for situations like RDP_FD=42foo, or where the
provided number is out of range.

Suggestion by Yong Bakos.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>

Remove a wrong closing “extern "C"” in shared/xalloc.c

Signed-off-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

rdp: Check for non-numeric value in RDP_FD env var

strtoul(nptr, endptr, ...) will set *endptr to nptr in the case of where
no digits were read from the string, and return 0.  Running with
RDP_FD=foo would thus result in fd=0 being specified to
freerdp_peer_new(), which is unlikely to be the user's intent.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>

multi-resource: Check for no digits in time description

strtoul(nptr, endptr, ...) will set *endptr to nptr in the case of where
no digits were read from the string.  E.g. "foo:bar" should trigger an
error, instead of being read as "0:0" and allowed through.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>

option-parser: Require integer option string values to be base-10

The third arg to strtol() specifies the base to assume for the number.
When 0 is passed, as is currently done in option-parser.c, hexadecimal
and octal numbers are permitted and automatically detected and
converted.

In weston and the weston clients and tests using option-parser.c, the
options are all things that can be expected to be specified in base 10:
widths, heights, counts, scales, font sizes, ports, ttys, connectors,
etc.  The subsurfaces client uses two modes, limited to values 0 and 1
only.  The zuc testsuite has a --random parameter for specifying a seed,
which is the only option where using hexadecimal or octal numbers might
conceivably happen.

The benefit of limiting this to base-10 is to eliminate surprises when
parsing numbers from the command line.  Also, by making the code
consistent with other usages of strtol/strtoul, it may make it possible
to factor out the common code in the future.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>