review.tizen.org Git - platform/kernel/linux-rpi.git/log

drm/vc4: hdmi: Unregister codec device on unbind

[ Upstream commit e40945ab7c7f966d0c37b7bd7b0596497dfe228d ]

On bind we will register the HDMI codec device but we don't unregister
it on unbind, leading to a device leakage. Unregister our device at
unbind.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: terminate dma transmission when slave abort

[ Upstream commit 80808768e41324d2e23de89972b5406c1020e6e4 ]

After slave abort, all DMA should be stopped, or it will affect the
next transmission and maybe abort again.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-3-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: Fix error in getting num-cs property

[ Upstream commit 9382df0a98aad5bbcd4d634790305a1d786ad224 ]

Get num-cs u32 from dts of_node property rather than u16.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-2-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode

[ Upstream commit 3a55f729240a686aa8af00af436306c0cd532522 ]

If vcpu has tsc_always_catchup set each request updates pvclock data.
KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on
host's side and do hypercall inside pvclock_read_retry loop leading to
infinite loop in such situation.

v3:
    Removed warn
    Changed return code to KVM_EFAULT
v2:
    Added warn

Signed-off-by: Anton Romanov <romanton@google.com>
Message-Id: <20220216182653.506850-1-romanton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: Fix lockdep false negative during host resume

[ Upstream commit 4cb9a998b1ce25fad74a82f5a5c45a4ef40de337 ]

I saw the below splatting after the host suspended and resumed.

   WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
   CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G        W IOE     5.17.0-rc3+ #4
   RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
   Call Trace:
    <TASK>
    syscore_resume+0x90/0x340
    suspend_devices_and_enter+0xaee/0xe90
    pm_suspend.cold+0x36b/0x3c2
    state_store+0x82/0xf0
    kernfs_fop_write_iter+0x1b6/0x260
    new_sync_write+0x258/0x370
    vfs_write+0x33f/0x510
    ksys_write+0xc9/0x160
    do_syscall_64+0x3b/0xc0
    entry_SYSCALL_64_after_hwframe+0x44/0xae

lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"

[ Upstream commit 6f66db29e2415cbe8759c48584f9cae19b3c2651 ]

It appears that last minute change moved ACPI ID of Alder Lake-M
to the INTC1055, which is already in the driver.

This ID on the other hand will be used elsewhere.

This reverts commit 258435a1c8187f559549e515d2f77fa0b57bcd27.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: pci: add support for the Intel Raptor Lake-S

[ Upstream commit 038438a25c45d5ac996e95a22fa9e76ff3d1f8c7 ]

This patch adds the necessary PCI ID for Intel Raptor Lake-S
devices.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220214141948.18637-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

swiotlb: fix info leak with DMA_FROM_DEVICE

[ Upstream commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e ]

The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.

A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
   interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
   and a corresponding dxferp. The peculiar thing about this is that TUR
   is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
   bounces the user-space buffer. As if the device was to transfer into
   it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in
   sg_build_indirect()") we make sure this first bounce buffer is
   allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
   device won't touch the buffer we prepare as if the we had a
   DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
   and the  buffer allocated by SG is mapped by the function
   virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
   scatter-gather and not scsi generics). This mapping involves bouncing
   via the swiotlb (we need swiotlb to do virtio in protected guest like
   s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
   (that is swiotlb) bounce buffer (which most likely contains some
   previous IO data), to the first bounce buffer, which contains all
   zeros.  Then we copy back the content of the first bounce buffer to
   the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
  ain't all zeros and fails.

One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).

Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Add test for bpf_timer overwriting crash

[ Upstream commit a7e75016a0753c24d6c995bc02501ae35368e333 ]

Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: meson-gxl: improve link-up behavior

[ Upstream commit 2c87c6f9fbddc5b84d67b2fa3f432fcac6d99d93 ]

Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.

According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.

Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Don't claim WOL when its not available

[ Upstream commit 00b022f8f876a3a036b0df7f971001bef6398605 ]

Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:

"Supports Wake-on: gsf"

which is false.

Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:

"Supports Wake-on: d"

This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.

Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix kernel-infoleak for SCTP sockets

[ Upstream commit 633593a808980f82d251d0ca89730d8bb8b0220c ]

syzbot reported a kernel infoleak [1] of 4 bytes.

After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()

Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.

[1]

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:154 [inline]
_copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
copy_to_iter include/linux/uio.h:162 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x795/0xa10 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3247 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1158 [inline]
netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
__netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1061
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0

CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: DP83822: clear MISR2 register to disable interrupts

[ Upstream commit 37c9d66c95564c85a001d8a035354f0220a1e1c3 ]

MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gianfar: ethtool: Fix refcount leak in gfar_get_ts_info

[ Upstream commit 2ac5b58e645c66932438bb021cb5b52097ce70b0 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: ts4900: Do not set DAT and OE together

[ Upstream commit 03fe003547975680fdb9ff5ab0e41cb68276c4f2 ]

This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.

Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.

Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: pmtu.sh: Kill nettest processes launched in subshell.

[ Upstream commit 94a4a4fe4c696413932eed8bdec46574de9576b8 ]

When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).

Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.

Also, double quote variables on the modified lines, to avoid shellcheck
warnings.

Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: pmtu.sh: Kill tcpdump processes launched by subshell.

[ Upstream commit 18dfc667550fe9c032a6dcc3402b50e691e18029 ]

The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:

$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]

$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap

Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.

Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.

Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.

Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: port100: fix use-after-free in port100_send_complete

[ Upstream commit f80cfe2f26581f188429c12bd937eb905ad3ac7b ]

Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.

port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free

Fail log:

BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
__usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670

...

Allocated by task 1255:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:436 [inline]
____kasan_kmalloc mm/kasan/common.c:515 [inline]
____kasan_kmalloc mm/kasan/common.c:474 [inline]
__kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
alloc_dr drivers/base/devres.c:116 [inline]
devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823
devm_kzalloc include/linux/device.h:209 [inline]
port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502

Freed by task 1255:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:366 [inline]
____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328
kasan_slab_free include/linux/kasan.h:236 [inline]
__cache_free mm/slab.c:3437 [inline]
kfree+0xf8/0x2b0 mm/slab.c:3794
release_nodes+0x112/0x1a0 drivers/base/devres.c:501
devres_release_all+0x114/0x190 drivers/base/devres.c:530
really_probe+0x626/0xcc0 drivers/base/dd.c:670

Reported-and-tested-by: syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com
Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Lag, Only handle events from highest priority multipath entry

[ Upstream commit ad11c4f1d8fd1f03639460e425a36f7fd0ea83f5 ]

There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.

Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix a race on command flush flow

[ Upstream commit 063bd355595428750803d8736a9bb7c8db67d42d ]

Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.

It fixes the following warning trace:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
<TASK>
mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
enter_error_state+0x44/0x80 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
process_one_work+0x1be/0x390
worker_thread+0x4d/0x3d0
? rescuer_thread+0x350/0x350
kthread+0x141/0x160
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>

Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix size field in bufferx_reg struct

[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ]

According to HW spec the field "size" should be 16 bits
in bufferx register.

Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ax25: Fix NULL pointer dereference in ax25_kill_by_device

[ Upstream commit 71171ac8eb34ce7fe6b3267dce27c313ab3cb3ac ]

When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:

===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...

This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.

Fixes: 4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr

[ Upstream commit c9ffa3e2bc451816ce0295e40063514fabf2bd36 ]

This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: lpc_eth: Handle error for clk_enable

[ Upstream commit 2169b79258c8be803d2595d6456b1e77129fe154 ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: cpts: Handle error for clk_enable

[ Upstream commit 6babfc6e6fab068018c36e8f6605184b8c0b349d ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix incorrect order of state message data sanity check

[ Upstream commit c79fcc27be90b308b3fa90811aefafdd4078668c ]

When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity check is done after the message header is accessed to
update some link variables.

This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.

Fixes: 9aa422ad3266 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet: Fix error handling in xemaclite_of_probe

[ Upstream commit b19ab4b38b06aae12442b2de95ccf58b5dc53584 ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.

Fixes: 5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix curr_link_speed advertised speed

[ Upstream commit ad35ffa252af67d4cc7c744b9377a2b577748e3f ]

Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.

Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)

Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Don't use GFP_KERNEL in atomic context

[ Upstream commit 3d97f1afd8d831e0c0dc1157418f94b8faa97b54 ]

ice_misc_intr() is an irq handler. It should not sleep.

Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory.

Fixes: 348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix error with handling of bonding MTU

[ Upstream commit 97b0129146b1544bbb0773585327896da3bb4e0a ]

When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held. This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev. Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.

Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.

Fixes: 348048e724a0e ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: stop disabling VFs due to PF error responses

[ Upstream commit 79498d5af8e458102242d1667cf44df1f1564e63 ]

The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.

This logic was added to the ice driver in commit 1071a8358a28 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit 5c3c48ac6bf5 ("i40e: implement virtual
device interface").

Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.

The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.

Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.

This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.

In fact, the change from dev_err to dev_info in i40e commit 18b7af57d9c1
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.

We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.

Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: stop disabling VFs due to PF error responses

[ Upstream commit 5710ab79166504013f7c0ae6a57e7d2fd26e5c43 ]

The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.

This logic originates from the early implementation of VF support in
commit 5c3c48ac6bf5 ("i40e: implement virtual device interface").

That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.

There is no justification for this behavior in the original
implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.

That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.

It is clear this check does not make sense, and causes problems which
led to ugly workarounds.

Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.

Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix handling of vlan strip virtual channel messages

[ Upstream commit 2cf29e55894886965722e6625f6a03630b4db31d ]

Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.

Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: aspeed: Fix AST2600 quad spi group

[ Upstream commit 2f6edb6bcb2f3f41d876e0eba2ba97f87a0296ea ]

Requesting quad mode for the FMC resulted in an error:

  &fmc {
         status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fwqspi_default>'

[    0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.

After applying this patch we can request the pins and the QSPI data
lines are muxed:

# cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID

Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()

[ Upstream commit e5417cbf7ab5df1632e68fe7d9e6331fc0e7dbd6 ]

Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: mixer: Fix P010 and P210 format numbers

[ Upstream commit 9470c29faa91c804aa04de4c10634bf02462bfa5 ]

It turns out that DE3 manual has inverted YUV and YVU format numbers for
P010 and P210. Invert them.

This was tested by playing video decoded to P010 and additionally
confirmed by looking at BSP driver source.

Fixes: 169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: acpi: Convert ACPI value of debounce to microseconds

[ Upstream commit 660c619b9d7ccd28648ee3766cdbe94ec7b27402 ]

It appears that GPIO ACPI library uses ACPI debounce values directly.
However, the GPIO library APIs expect the debounce timeout to be in
microseconds.

Convert ACPI value of debounce to microseconds.

While at it, document this detail where it is appropriate.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smsc95xx: Ignore -ENODEV errors when device is unplugged

[ Upstream commit c70c453abcbf3ecbaadd4c3236a5119b8da365cf ]

According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.

This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.

This causes the following errors to be shown on reboot, for example:

ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system

Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.

Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: return status of qed_iov_get_link

[ Upstream commit d9dc0c84ad2d4cc911ba252c973d1bf18d5eb9cf ]

Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
  garbage or undefined
  ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
                   ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status.  So change the decl to return status.

Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

esp: Fix BEET mode inter address family tunneling on GSO

[ Upstream commit 053c8fdf2c930efdff5496960842bbb5c34ad43a ]

The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.

Fixes: 384a46ea7bdc7 ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb18a99 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

esp: Fix possible buffer overflow in ESP transformation

[ Upstream commit ebe48d368e97d007bfeb76fcb065d6cfc4c96645 ]

The maximum message size that can be send is bigger than
the maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.

Fix this by doing a fallback to COW in that case.

v2:

Avoid get get_order() costs as suggested by Linus Torvalds.

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare()

[ Upstream commit e0058f0fa80f6e09c4d363779c241c45a3c56b94 ]

The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so
its return value should be checked.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isdn: hfcpci: check the return value of dma_set_mask() in setup_hw()

[ Upstream commit d0aeb0d4a3f7d2a0df7e9545892bbeede8f2ac7e ]

The function dma_set_mask() in setup_hw() can fail, so its return value
should be checked.

Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa: fix use-after-free on vp_vdpa_remove

[ Upstream commit eb057b44dbe35ae14527830236a92f51de8f9184 ]

When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device
and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove,
triggering use-after-free.

Call Trace of unbinding driver free vp_vdpa :
do_syscall_64
  vfs_write
    kernfs_fop_write_iter
      device_release_driver_internal
        pci_device_remove
          vp_vdpa_remove
            vdpa_unregister_device
              kobject_release
                device_release
                  kfree

Call Trace of dereference vp_vdpa->mdev.pci_dev:
vp_modern_remove
  pci_release_selected_regions
    pci_release_region
      pci_resource_len
        pci_resource_end
          (dev)->resource[(bar)].end

Signed-off-by: Zhang Min <zhang.min9@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/20220301091059.46869-1-wang.yi59@zte.com.cn
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 64b9f64f80a6 ("vdpa: introduce virtio pci driver")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero

[ Upstream commit dacc73ed0b88f1a787ec20385f42ca9dd9eddcd0 ]

Currently the value of max_discard_segment will be set to
MAX_DISCARD_SEGMENTS (256) with no basis in hardware if device
set 0 to max_discard_seg in configuration space. It's incorrect
since the device might not be able to handle such large descriptors.
To fix it, let's follow max_segments restrictions in this case.

Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220304100058.116-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost: fix hung thread due to erroneous iotlb entries

[ Upstream commit e2ae38cf3d91837a493cb2093c87700ff3cbe667 ]

In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when
start is 0 and last is ULONG_MAX. One instance where it can happen
is when userspace sends an IOTLB message with iova=size=uaddr=0
(vhost_process_iotlb_msg). So, an entry with size = 0, start = 0,
last = ULONG_MAX ends up in the iotlb. Next time a packet is sent,
iotlb_access_ok() loops indefinitely due to that erroneous entry.

Call Trace:
<TASK>
iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340
vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366
vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104
vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>

Reported by syzbot at:
https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87

To fix this, do two things:

1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map
a range with size 0.
2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX]
by splitting it into two entries.

Fixes: 0bbe30668d89e ("vhost: factor out IOTLB")
Reported-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
Tested-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20220305095525.5145-1-mail@anirudhrb.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mISDN: Fix memory leak in dsp_pipeline_build()

[ Upstream commit c6a502c2299941c8326d029cfc8a3bc8a4607ad5 ]

dsp_pipeline_build() allocates dup pointer by kstrdup(cfg),
but then it updates dup variable by strsep(&dup, "|").
As a result when it calls kfree(dup), the dup variable contains NULL.

Found by Linux Driver Verification project (linuxtesting.org) with SVACE.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 960366cf8dbb ("Add mISDN DSP")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: meson-gxl: fix interrupt handling in forced mode

[ Upstream commit a502a8f04097e038c3daa16c5202a9538116d563 ]

This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.

This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).

This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.

Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vduse: Fix returning wrong type in vduse_domain_alloc_iova()

[ Upstream commit b9d102dafec6af1c07b610faf0a6d4e8aee14ae0 ]

This fixes the following smatch warnings:

drivers/vdpa/vdpa_user/iova_domain.c:305 vduse_domain_alloc_iova() warn: should 'iova_pfn << shift' be a 64 bit type?

Fixes: 8c773d53fb7b ("vduse: Implement an MMU-based software IOTLB")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220121083940.102-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command

[ Upstream commit ed0f849fc3a63ed2ddf5e72cdb1de3bdbbb0f8eb ]

When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
request from the driver, presently there is no validation against the
number of queue pairs to configure, or even if multiqueue had been
negotiated or not is unverified. This may lead to kernel panic due to
uninitialized resource for the queues were there any bogus request
sent down by untrusted driver. Tie up the loose ends there.

Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-4-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix kernel panic when enabling bearer

[ Upstream commit be4977b847f5d5cedb64d50eaaf2218c3a55a3a3 ]

When enabling a bearer on a node, a kernel panic is observed:

[    4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc]
...
[    4.520030] Call Trace:
[    4.520689]  <IRQ>
[    4.521236]  tipc_link_build_proto_msg+0x375/0x750 [tipc]
[    4.522654]  tipc_link_build_state_msg+0x48/0xc0 [tipc]
[    4.524034]  __tipc_node_link_up+0xd7/0x290 [tipc]
[    4.525292]  tipc_rcv+0x5da/0x730 [tipc]
[    4.526346]  ? __netif_receive_skb_core+0xb7/0xfc0
[    4.527601]  tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[    4.528737]  __netif_receive_skb_list_core+0x20b/0x260
[    4.530068]  netif_receive_skb_list_internal+0x1bf/0x2e0
[    4.531450]  ? dev_gro_receive+0x4c2/0x680
[    4.532512]  napi_complete_done+0x6f/0x180
[    4.533570]  virtnet_poll+0x29c/0x42e [virtio_net]
...

The node in question is receiving activate messages in another
thread after changing bearer status to allow message sending/
receiving in current thread:

         thread 1           |              thread 2
         --------           |              --------
                            |
tipc_enable_bearer()        |
  test_and_set_bit_lock()   |
    tipc_bearer_xmit_skb()  |
                            | tipc_l2_rcv_msg()
                            |   tipc_rcv()
                            |     __tipc_node_link_up()
                            |       tipc_link_build_state_msg()
                            |         tipc_link_build_proto_msg()
                            |           tipc_mon_prep()
                            |           {
                            |             ...
                            |             // null-pointer dereference
                            |             u16 gen = mon->dom_gen;
                            |             ...
                            |           }
  // Not being executed yet |
  tipc_mon_create()         |
  {                         |
    ...                     |
    // allocate             |
    mon = kzalloc();        |
    ...                     |
  }                         |

Monitoring pointer in thread 2 is dereferenced before monitoring data
is allocated in thread 1. This causes kernel panic.

This commit fixes it by allocating the monitoring data before enabling
the bearer to receive messages.

Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias

[ Upstream commit a0e897d1b36793fe0ab899f2fe93dff25c82f418 ]

U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define
also alias for ethernet0.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: vivaldi: fix sysfs attributes leak

[ Upstream commit cc71d37fd1f11e0495b1cf580909ebea37eaa886 ]

The driver creates the top row map sysfs attribute in input_configured()
method; unfortunately we do not have a callback that is executed when HID
interface is unbound, thus we are leaking these sysfs attributes, for
example when device is disconnected.

To fix it let's switch to managed version of adding sysfs attributes which
will ensure that they are destroyed when the driver is unbound.

Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: dispcc: Update the transition delay for MDSS GDSC

[ Upstream commit 6e6fec3f961c00ca34ffb4bf2ad9febb4b499f8d ]

On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.

The recommended transition delay for mdss core gdsc updated for
SC7180/SC7280/SM8250.

Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180")
Fixes: 1a00c962f9cd ("clk: qcom: Add display clock controller driver for SC7280")
Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-2-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sboyd@kernel.org: lowercase hex]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gdsc: Add support to update GDSC transition delay

[ Upstream commit 4e7c4d3652f96f41179aab3ff53025c7a550d689 ]

GDSCs have multiple transition delays which are used for the GDSC FSM
states. Older targets/designs required these values to be updated from
gdsc code to certain default values for the FSM state to work as
expected. But on the newer targets/designs the values updated from the
GDSC driver can hamper the FSM state to not work as expected.

On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.

Thus add support to update the transition delay from the clock
controller gdscs as required.

Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs)
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: boot: dts: bcm2711: Fix HVS register range

[ Upstream commit 515415d316168c6521d74ea8280287e28d7303e6 ]

While the HVS has the same context memory size in the BCM2711 than in
the previous SoCs, the range allocated to the registers doubled and it
now takes 16k + 16k, compared to 8k + 16k before.

The KMS driver will use the whole context RAM though, eventually
resulting in a pointer dereference error when we access the higher half
of the context memory since it hasn't been mapped.

Fixes: 4564363351e2 ("ARM: dts: bcm2711: Enable the display pipeline")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts

[ Upstream commit fc3ef2e3297b3c0e2006b5d7b3d66965e3392036 ]

Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug.
The root case is in missing validation check of actual number of endpoints.

Code should not blindly access usb_host_interface::endpoint array, since
it may contain less endpoints than code expects.

Fix it by adding missing validaion check and print an error if
number of endpoints do not match expected number

Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels")
Reported-and-tested-by: syzbot+35eebd505e97d315d01c@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: elo: Revert USB reference counting

[ Upstream commit ac89895213d8950dba6ab342863a0959f73142a7 ]

Commit 817b8b9c539 ("HID: elo: fix memory leak in elo_probe") introduced
memory leak on error path, but more importantly the whole USB reference
counting is not needed at all in the first place, as the driver itself
doesn't change the reference counting in any way, and the associated
usb_device is guaranteed to be kept around by USB core as long as the
driver binding exists.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: fbf42729d0e ("HID: elo: update the reference count of the usb device structure")
Fixes: 817b8b9c539 ("HID: elo: fix memory leak in elo_probe")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: Correct UFS symbol clocks

[ Upstream commit 0fd4dcb607ce29110d6c0b481a98c4ff3d300551 ]

The introduction of '9a61f813fcc8 ("clk: qcom: regmap-mux: fix parent
clock lookup")' broke UFS support on SM8350.

The cause for this is that the symbol clocks have a specified rate in
the "freq-table-hz" table in the UFS node, which causes the UFS code to
request a rate change, for which the "bi_tcxo" happens to provide the
closest rate. Prior to the change in regmap-mux it was determined
(incorrectly) that no change was needed and everything worked.

The rates of 75 and 300MHz matches the documentation for the symbol
clocks, but we don't represent the parent clocks today. So let's mimic
the configuration found in other platforms, by omitting the rate for the
symbol clocks as well to avoid the rate change.

While at it also fill in the dummy symbol clocks that was dropped from
the GCC driver as it was upstreamed.

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211222162058.3418902-1-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: Describe GCC dependency clocks

[ Upstream commit 9ea9eb36b3c046fc48e737db4de69f7acd12f9be ]

Add all the clock names that the GCC driver expects to get via DT, so that the
clock handles can be filled as the development progresses.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-8-konrad.dybcio@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.28

Link: https://lore.kernel.org/r/20220309155859.239810747@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Link: https://lore.kernel.org/r/20220310140812.869208747@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de> =
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE"

This reverts commit e799974e7cbb2e77ec12431512e155574c6ed333 which is
commit dc0075ba7f387fe4c48a8c674b11ab6f374a6acc upstream.

It's been reported to cause problems with a number of Fedora and Arch
Linux users, so drop it for now until that is resolved.

Link: https://lore.kernel.org/r/CAJZ5v0gE52NT=4kN4MkhV3Gx=M5CeMGVHOF0jgTXDb5WwAMs_Q@mail.gmail.com
Link: https://lore.kernel.org/r/31b9d1cd-6a67-218b-4ada-12f72e6f00dc@redhat.com
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Justin Forbes <jmforbes@linuxtx.org>
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netfront: react properly to failing gnttab_end_foreign_access_ref()

Commit 66e3531b33ee51dad17c463b4d9c9f52e341503d upstream.

When calling gnttab_end_foreign_access_ref() the returned value must
be tested and the reaction to that value should be appropriate.

In case of failure in xennet_get_responses() the reaction should not be
to crash the system, but to disable the network device.

The calls in setup_netfront() can be replaced by calls of
gnttab_end_foreign_access(). While at it avoid double free of ring
pages and grant references via xennet_disconnect_backend() in this case.

This is CVE-2022-23042 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gnttab: fix gnttab_end_foreign_access() without page specified

Commit 42baefac638f06314298087394b982ead9ec444b upstream.

gnttab_end_foreign_access() is used to free a grant reference and
optionally to free the associated page. In case the grant is still in
use by the other side processing is being deferred. This leads to a
problem in case no page to be freed is specified by the caller: the
caller doesn't know that the page is still mapped by the other side
and thus should not be used for other purposes.

The correct way to handle this situation is to take an additional
reference to the granted page in case handling is being deferred and
to drop that reference when the grant reference could be freed
finally.

This requires that there are no users of gnttab_end_foreign_access()
left directly repurposing the granted page after the call, as this
might result in clobbered data or information leaks via the not yet
freed grant reference.

This is part of CVE-2022-23041 / XSA-396.

Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pvcalls: use alloc/free_pages_exact()

Commit b0576cc9c6b843d99c6982888d59a56209341888 upstream.

Instead of __get_free_pages() and free_pages() use alloc_pages_exact()
and free_pages_exact(). This is in preparation of a change of
gnttab_end_foreign_access() which will prohibit use of high-order
pages.

This is part of CVE-2022-23041 / XSA-396.

Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/9p: use alloc/free_pages_exact()

Commit 5cadd4bb1d7fc9ab201ac14620d1a478357e4ebd upstream.

Instead of __get_free_pages() and free_pages() use alloc_pages_exact()
and free_pages_exact(). This is in preparation of a change of
gnttab_end_foreign_access() which will prohibit use of high-order
pages.

By using the local variable "order" instead of ring->intf->ring_order
in the error path of xen_9pfs_front_alloc_dataring() another bug is
fixed, as the error path can be entered before ring->intf->ring_order
is being set.

By using alloc_pages_exact() the size in bytes is specified for the
allocation, which fixes another bug for the case of
order < (PAGE_SHIFT - XEN_PAGE_SHIFT).

This is part of CVE-2022-23041 / XSA-396.

Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: remove gnttab_query_foreign_access()

Commit 1dbd11ca75fe664d3e54607547771d021f531f59 upstream.

Remove gnttab_query_foreign_access(), as it is unused and unsafe to
use.

All previous use cases assumed a grant would not be in use after
gnttab_query_foreign_access() returned 0. This information is useless
in best case, as it only refers to a situation in the past, which could
have changed already.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gntalloc: don't use gnttab_query_foreign_access()

Commit d3b6372c5881cb54925212abb62c521df8ba4809 upstream.

Using gnttab_query_foreign_access() is unsafe, as it is racy by design.

The use case in the gntalloc driver is not needed at all. While at it
replace the call of gnttab_end_foreign_access_ref() with a call of
gnttab_end_foreign_access(), which is what is really wanted there. In
case the grant wasn't used due to an allocation failure, just free the
grant via gnttab_free_grant_reference().

This is CVE-2022-23039 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/scsifront: don't use gnttab_query_foreign_access() for mapped status

Commit 33172ab50a53578a95691310f49567c9266968b0 upstream.

It isn't enough to check whether a grant is still being in use by
calling gnttab_query_foreign_access(), as a mapping could be realized
by the other side just after having called that function.

In case the call was done in preparation of revoking a grant it is
better to do so via gnttab_try_end_foreign_access() and check the
success of that operation instead.

This is CVE-2022-23038 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netfront: don't use gnttab_query_foreign_access() for mapped status

Commit 31185df7e2b1d2fa1de4900247a12d7b9c7087eb upstream.

It isn't enough to check whether a grant is still being in use by
calling gnttab_query_foreign_access(), as a mapping could be realized
by the other side just after having called that function.

In case the call was done in preparation of revoking a grant it is
better to do so via gnttab_end_foreign_access_ref() and check the
success of that operation instead.

This is CVE-2022-23037 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/blkfront: don't use gnttab_query_foreign_access() for mapped status

Commit abf1fd5919d6238ee3bc5eb4a9b6c3947caa6638 upstream.

It isn't enough to check whether a grant is still being in use by
calling gnttab_query_foreign_access(), as a mapping could be realized
by the other side just after having called that function.

In case the call was done in preparation of revoking a grant it is
better to do so via gnttab_end_foreign_access_ref() and check the
success of that operation instead.

For the ring allocation use alloc_pages_exact() in order to avoid
high order pages in case of a multi-page ring.

If a grant wasn't unmapped by the backend without persistent grants
being used, set the device state to "error".

This is CVE-2022-23036 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/grant-table: add gnttab_try_end_foreign_access()

Commit 6b1775f26a2da2b05a6dc8ec2b5d14e9a4701a1a upstream.

Add a new grant table function gnttab_try_end_foreign_access(), which
will remove and free a grant if it is not in use.

Its main use case is to either free a grant if it is no longer in use,
or to take some other action if it is still in use. This other action
can be an error exit, or (e.g. in the case of blkfront persistent grant
feature) some special handling.

This is CVE-2022-23036, CVE-2022-23038 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/xenbus: don't let xenbus_grant_ring() remove grants in error case

Commit 3777ea7bac3113005b7180e6b9dadf16d19a5827 upstream.

Letting xenbus_grant_ring() tear down grants in the error case is
problematic, as the other side could already have used these grants.
Calling gnttab_end_foreign_access_ref() without checking success is
resulting in an unclear situation for any caller of xenbus_grant_ring()
as in the error case the memory pages of the ring page might be
partially mapped. Freeing them would risk unwanted foreign access to
them, while not freeing them would leak memory.

In order to remove the need to undo any gnttab_grant_foreign_access()
calls, use gnttab_alloc_grant_references() to make sure no further
error can occur in the loop granting access to the ring pages.

It should be noted that this way of handling removes leaking of
grant entries in the error case, too.

This is CVE-2022-23040 / part of XSA-396.

Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: fix build warning in proc-v7-bugs.c

commit b1a384d2cbccb1eb3f84765020d25e2c1929706e upstream.

The kernel test robot discovered that building without
HARDEN_BRANCH_PREDICTOR issues a warning due to a missing
argument to pr_info().

Add the missing argument.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9dd78194a372 ("ARM: report Spectre v2 status through sysfs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Do not include __READ_ONCE() block in assembly files

commit 52c9f93a9c482251cb0d224faa602ba26d462be8 upstream.

When building arm64 defconfig + CONFIG_LTO_CLANG_{FULL,THIN}=y after
commit 558c303c9734 ("arm64: Mitigate spectre style branch history side
channels"), the following error occurs:

  <instantiation>:4:2: error: invalid fixup for movz/movk instruction
   mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3
   ^

Marc figured out that moving "#include <linux/init.h>" in
include/linux/arm-smccc.h into a !__ASSEMBLY__ block resolves it. The
full include chain with CONFIG_LTO=y from include/linux/arm-smccc.h:

include/linux/init.h
include/linux/compiler.h
arch/arm64/include/asm/rwonce.h
arch/arm64/include/asm/alternative-macros.h
arch/arm64/include/asm/assembler.h

The asm/alternative-macros.h include in asm/rwonce.h only happens when
CONFIG_LTO is set, which ultimately casues asm/assembler.h to be
included before the definition of ARM_SMCCC_ARCH_WORKAROUND_3. As a
result, the preprocessor does not expand ARM_SMCCC_ARCH_WORKAROUND_3 in
__mitigate_spectre_bhb_fw, which results in the error above.

Avoid this problem by just avoiding the CONFIG_LTO=y __READ_ONCE() block
in asm/rwonce.h with assembly files, as nothing in that block is useful
to assembly files, which allows ARM_SMCCC_ARCH_WORKAROUND_3 to be
properly expanded with CONFIG_LTO=y builds.

Fixes: e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: <stable@vger.kernel.org> # 5.11.x
Link: https://lore.kernel.org/r/20220309155716.3988480-1-maz@kernel.org/
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220309191633.2307110-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: Do not use NOCROSSREFS directive with ld.lld

commit 36168e387fa7d0f1fe0cd5cf76c8cea7aee714fa upstream.

ld.lld does not support the NOCROSSREFS directive at the moment, which
breaks the build after commit b9baf5c8c5c3 ("ARM: Spectre-BHB
workaround"):

ld.lld: error: ./arch/arm/kernel/vmlinux.lds:34: AT expected, but got NOCROSSREFS

Support for this directive will eventually be implemented, at which
point a version check can be added. To avoid breaking the build in the
meantime, just define NOCROSSREFS to nothing when using ld.lld, with a
link to the issue for tracking.

Cc: stable@vger.kernel.org
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Link: https://github.com/ClangBuiltLinux/linux/issues/1609
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: fix co-processor register typo

commit 33970b031dc4653cc9dc80f2886976706c4c8ef1 upstream.

In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4

Reported-by: kernel test robot <lkp@intel.com>
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: fix build error when BPF_SYSCALL is disabled

commit 330f4c53d3c2d8b11d86ec03a964b86dc81452f5 upstream.

It was missing a semicolon.

Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 25875aa71dfe ("ARM: include unprivileged BPF status in Spectre V2 reporting").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: proton-pack: Include unprivileged eBPF status in Spectre v2 mitigation reporting

commit 58c9a5060cb7cd529d49c93954cdafe81c1d642a upstream.

The mitigations for Spectre-BHB are only applied when an exception is
taken from user-space. The mitigation status is reported via the spectre_v2
sysfs vulnerabilities file.

When unprivileged eBPF is enabled the mitigation in the exception vectors
can be avoided by an eBPF program.

When unprivileged eBPF is enabled, print a warning and report vulnerable
via the sysfs vulnerabilities file.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Use the clearbhb instruction in mitigations

commit 228a26b912287934789023b4132ba76065d9491c upstream.

Future CPUs may implement a clearbhb instruction that is sufficient
to mitigate SpectreBHB. CPUs that implement this instruction, but
not CSV2.3 must be affected by Spectre-BHB.

Add support to use this instruction as the BHB mitigation on CPUs
that support it. The instruction is in the hint space, so it will
be treated by a NOP as older CPUs.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated

commit a5905d6af492ee6a4a2205f0d550b3f931b03d03 upstream.

KVM allows the guest to discover whether the ARCH_WORKAROUND SMCCC are
implemented, and to preserve that state during migration through its
firmware register interface.

Add the necessary boiler plate for SMCCC_ARCH_WORKAROUND_3.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Mitigate spectre style branch history side channels

commit 558c303c9734af5a813739cd284879227f7297d2 upstream.

Speculation attacks against some high-performance processors can
make use of branch history to influence future speculation.
When taking an exception from user-space, a sequence of branches
or a firmware call overwrites or invalidates the branch history.

The sequence of branches is added to the vectors, and should appear
before the first indirect branch. For systems using KPTI the sequence
is added to the kpti trampoline where it has a free register as the exit
from the trampoline is via a 'ret'. For systems not using KPTI, the same
register tricks are used to free up a register in the vectors.

For the firmware call, arch-workaround-3 clobbers 4 registers, so
there is no choice but to save them to the EL1 stack. This only happens
for entry from EL0, so if we take an exception due to the stack access,
it will not become re-entrant.

For KVM, the existing branch-predictor-hardening vectors are used.
When a spectre version of these vectors is in use, the firmware call
is sufficient to mitigate against Spectre-BHB. For the non-spectre
versions, the sequence of branches is added to the indirect vector.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: proton-pack: Report Spectre-BHB vulnerabilities as part of Spectre-v2

commit dee435be76f4117410bbd90573a881fd33488f37 upstream.

Speculation attacks against some high-performance processors can
make use of branch history to influence future speculation as part of
a spectre-v2 attack. This is not mitigated by CSV2, meaning CPUs that
previously reported 'Not affected' are now moderately mitigated by CSV2.

Update the value in /sys/devices/system/cpu/vulnerabilities/spectre_v2
to also show the state of the BHB mitigation.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add percpu vectors for EL1

commit bd09128d16fac3c34b80bd6a29088ac632e8ce09 upstream.

The Spectre-BHB workaround adds a firmware call to the vectors. This
is needed on some CPUs, but not others. To avoid the unaffected CPU in
a big/little pair from making the firmware call, create per cpu vectors.

The per-cpu vectors only apply when returning from EL0.

Systems using KPTI can use the canonical 'full-fat' vectors directly at
EL1, the trampoline exit code will switch to this_cpu_vector on exit to
EL0. Systems not using KPTI should always use this_cpu_vector.

this_cpu_vector will point at a vector in tramp_vecs or
__bp_harden_el1_vectors, depending on whether KPTI is in use.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Add macro for reading symbol addresses from the trampoline

commit b28a8eebe81c186fdb1a0078263b30576c8e1f42 upstream.

The trampoline code needs to use the address of symbols in the wider
kernel, e.g. vectors. PC-relative addressing wouldn't work as the
trampoline code doesn't run at the address the linker expected.

tramp_ventry uses a literal pool, unless CONFIG_RANDOMIZE_BASE is
set, in which case it uses the data page as a literal pool because
the data page can be unmapped when running in user-space, which is
required for CPUs vulnerable to meltdown.

Pull this logic out as a macro, instead of adding a third copy
of it.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Add vectors that have the bhb mitigation sequences

commit ba2689234be92024e5635d30fe744f4853ad97db upstream.

Some CPUs affected by Spectre-BHB need a sequence of branches, or a
firmware call to be run before any indirect branch. This needs to go
in the vectors. No CPU needs both.

While this can be patched in, it would run on all CPUs as there is a
single set of vectors. If only one part of a big/little combination is
affected, the unaffected CPUs have to run the mitigation too.

Create extra vectors that include the sequence. Subsequent patches will
allow affected CPUs to select this set of vectors. Later patches will
modify the loop count to match what the CPU requires.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Add non-kpti __bp_harden_el1_vectors for mitigations

commit aff65393fa1401e034656e349abd655cfe272de0 upstream.

kpti is an optional feature, for systems not using kpti a set of
vectors for the spectre-bhb mitigations is needed.

Add another set of vectors, __bp_harden_el1_vectors, that will be
used if a mitigation is needed and kpti is not in use.

The EL1 ventries are repeated verbatim as there is no additional
work needed for entry from EL1.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Allow the trampoline text to occupy multiple pages

commit a9c406e6462ff14956d690de7bbe5131a5677dc9 upstream.

Adding a second set of vectors to .entry.tramp.text will make it
larger than a single 4K page.

Allow the trampoline text to occupy up to three pages by adding two
more fixmap slots. Previous changes to tramp_valias allowed it to reach
beyond a single page.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Make the kpti trampoline's kpti sequence optional

commit c47e4d04ba0f1ea17353d85d45f611277507e07a upstream.

Spectre-BHB needs to add sequences to the vectors. Having one global
set of vectors is a problem for big/little systems where the sequence
is costly on cpus that are not vulnerable.

Making the vectors per-cpu in the style of KVM's bh_harden_hyp_vecs
requires the vectors to be generated by macros.

Make the kpti re-mapping of the kernel optional, so the macros can be
used without kpti.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Move trampoline macros out of ifdef'd section

commit 13d7a08352a83ef2252aeb464a5e08dfc06b5dfd upstream.

The macros for building the kpti trampoline are all behind
CONFIG_UNMAP_KERNEL_AT_EL0, and in a region that outputs to the
.entry.tramp.text section.

Move the macros out so they can be used to generate other kinds of
trampoline. Only the symbols need to be guarded by
CONFIG_UNMAP_KERNEL_AT_EL0 and appear in the .entry.tramp.text section.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Don't assume tramp_vectors is the start of the vectors

commit ed50da7764535f1e24432ded289974f2bf2b0c5a upstream.

The tramp_ventry macro uses tramp_vectors as the address of the vectors
when calculating which ventry in the 'full fat' vectors to branch to.

While there is one set of tramp_vectors, this will be true.
Adding multiple sets of vectors will break this assumption.

Move the generation of the vectors to a macro, and pass the start
of the vectors as an argument to tramp_ventry.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Allow tramp_alias to access symbols after the 4K boundary

commit 6c5bf79b69f911560fbf82214c0971af6e58e682 upstream.

Systems using kpti enter and exit the kernel through a trampoline mapping
that is always mapped, even when the kernel is not. tramp_valias is a macro
to find the address of a symbol in the trampoline mapping.

Adding extra sets of vectors will expand the size of the entry.tramp.text
section to beyond 4K. tramp_valias will be unable to generate addresses
for symbols beyond 4K as it uses the 12 bit immediate of the add
instruction.

As there are now two registers available when tramp_alias is called,
use the extra register to avoid the 4K limit of the 12 bit immediate.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Move the trampoline data page before the text page

commit c091fb6ae059cda563b2a4d93fdbc548ef34e1d6 upstream.

The trampoline code has a data page that holds the address of the vectors,
which is unmapped when running in user-space. This ensures that with
CONFIG_RANDOMIZE_BASE, the randomised address of the kernel can't be
discovered until after the kernel has been mapped.

If the trampoline text page is extended to include multiple sets of
vectors, it will be larger than a single page, making it tricky to
find the data page without knowing the size of the trampoline text
pages, which will vary with PAGE_SIZE.

Move the data page to appear before the text page. This allows the
data page to be found without knowing the size of the trampoline text
pages. 'tramp_vectors' is used to refer to the beginning of the
.entry.tramp.text section, do that explicitly.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Free up another register on kpti's tramp_exit path

commit 03aff3a77a58b5b52a77e00537a42090ad57b80b upstream.

Kpti stashes x30 in far_el1 while it uses x30 for all its work.

Making the vectors a per-cpu data structure will require a second
register.

Allow tramp_exit two registers before it unmaps the kernel, by
leaving x30 on the stack, and stashing x29 in far_el1.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: Make the trampoline cleanup optional

commit d739da1694a0eaef0358a42b76904b611539b77b upstream.

Subsequent patches will add additional sets of vectors that use
the same tricks as the kpti vectors to reach the full-fat vectors.
The full-fat vectors contain some cleanup for kpti that is patched
in by alternatives when kpti is in use. Once there are additional
vectors, the cleanup will be needed in more cases.

But on big/little systems, the cleanup would be harmful if no
trampoline vector were in use. Instead of forcing CPUs that don't
need a trampoline vector to use one, make the trampoline cleanup
optional.

Entry at the top of the vectors will skip the cleanup. The trampoline
vectors can then skip the first instruction, triggering the cleanup
to run.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Allow indirect vectors to be used without SPECTRE_V3A

commit 5bdf3437603d4af87f9c7f424b0c8aeed2420745 upstream.

CPUs vulnerable to Spectre-BHB either need to make an SMC-CC firmware
call from the vectors, or run a sequence of branches. This gets added
to the hyp vectors. If there is no support for arch-workaround-1 in
firmware, the indirect vector will be used.

kvm_init_vector_slots() only initialises the two indirect slots if
the platform is vulnerable to Spectre-v3a. pKVM's hyp_map_vectors()
only initialises __hyp_bp_vect_base if the platform is vulnerable to
Spectre-v3a.

As there are about to more users of the indirect vectors, ensure
their entries in hyp_spectre_vector_selector[] are always initialised,
and __hyp_bp_vect_base defaults to the regular VA mapping.

The Spectre-v3a check is moved to a helper
kvm_system_needs_idmapped_vectors(), and merged with the code
that creates the hyp mappings.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: spectre: Rename spectre_v4_patch_fw_mitigation_conduit

commit 1b33d4860deaecf1d8eec3061b7e7ed7ab0bae8d upstream.

The spectre-v4 sequence includes an SMC from the assembly entry code.
spectre_v4_patch_fw_mitigation_conduit is the patching callback that
generates an HVC or SMC depending on the SMCCC conduit type.

As this isn't specific to spectre-v4, rename it
smccc_patch_fw_mitigation_conduit so it can be re-used.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry.S: Add ventry overflow sanity checks

commit 4330e2c5c04c27bebf89d34e0bc14e6943413067 upstream.

Subsequent patches add even more code to the ventry slots.
Ensure kernels that overflow a ventry slot don't get built.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: add HWCAP for FEAT_RPRES

commit 1175011a7d0030d49dc9c10bde36f08f26d0a8ee upstream.

Add a new HWCAP to detect the Increased precision of Reciprocal Estimate
and Reciprocal Square Root Estimate feature (FEAT_RPRES), introduced in Armv8.7.

Also expose this to userspace in the ID_AA64ISAR2_EL1 feature register.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211210165432.8106-4-joey.gouly@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: add HWCAP for FEAT_AFP

commit 5c13f042e73200b50573ace63e1a6b94e2917616 upstream.

Add a new HWCAP to detect the Alternate Floating-point Behaviour
feature (FEAT_AFP), introduced in Armv8.7.

Also expose this to userspace in the ID_AA64MMFR1_EL1 feature register.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211210165432.8106-2-joey.gouly@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>