platform/kernel/u-boot.git
7 years agoarmv8: ls1043a: add PCIe dts node
Minghuan Lian [Tue, 13 Dec 2016 06:54:13 +0000 (14:54 +0800)]
armv8: ls1043a: add PCIe dts node

Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agoarm: ls1012a: add PCIe dts node
Minghuan Lian [Tue, 13 Dec 2016 06:54:12 +0000 (14:54 +0800)]
arm: ls1012a: add PCIe dts node

Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agoarm: ls1021a: add PCIe dts node
Minghuan Lian [Tue, 13 Dec 2016 06:54:11 +0000 (14:54 +0800)]
arm: ls1021a: add PCIe dts node

Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agodm: pci: remove pci_bus_to_hose(0) calling
Minghuan Lian [Tue, 13 Dec 2016 06:54:10 +0000 (14:54 +0800)]
dm: pci: remove pci_bus_to_hose(0) calling

There may be multiple PCIe controllers in a SoC.
It is not correct that always calling pci_bus_to_hose(0) to get
the first PCIe controller for the PCIe device connected other
controllers. We just remove this calling because hose always point
the correct PCIe controller.

Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agodm: pci: return the real controller in pci_bus_to_hose()
Minghuan Lian [Tue, 13 Dec 2016 06:54:09 +0000 (14:54 +0800)]
dm: pci: return the real controller in pci_bus_to_hose()

for the legacy PCI driver, the function pci_bus_to_hose() returns
the real PCIe controller. To keep consistency, this function is
changed to return the PCIe controller pointer of the root bus
instead of the current PCIe bus.

Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agoconfigs: ls1021a: enable DT and DM support
Hou Zhiqiang [Tue, 13 Dec 2016 06:54:08 +0000 (14:54 +0800)]
configs: ls1021a: enable DT and DM support

Enable DT to support Driver Model.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agoarmv8/layerscape: remove unnecessary function declares
Minghuan Lian [Tue, 15 Nov 2016 09:35:24 +0000 (17:35 +0800)]
armv8/layerscape: remove unnecessary function declares

For the function alloc_stream_ids() append_mmu_masters() and
fdt_fixup_smmu_pcie() there are no related definitions and they
are never called. So the patch removes the unnecessary declares.

Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agoarmv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20
Priyanka Jain [Wed, 9 Nov 2016 06:57:54 +0000 (12:27 +0530)]
armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20

It is recommended to set forced-order mode in RNI-6,
RNI-20 for performance optimization in LS2088A.

Both LS2080A, LS2088A families has CONFIG_LS2080A define.
As above update is required only for LS2088A, skip this
for LS2080A SoC family.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agofsl/usb: enable usb feature for ls1046ardb
jerry.huang@nxp.com [Tue, 15 Nov 2016 02:47:52 +0000 (10:47 +0800)]
fsl/usb: enable usb feature for ls1046ardb

Enable usb feature for ls1046ardb

Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
7 years agoPrepare v2017.01 v2017.01
Tom Rini [Mon, 9 Jan 2017 16:57:05 +0000 (11:57 -0500)]
Prepare v2017.01

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agolib: gitignore *.elf and *.so generated by efi_loader
Ladislav Michl [Mon, 9 Jan 2017 10:33:28 +0000 (11:33 +0100)]
lib: gitignore *.elf and *.so generated by efi_loader

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
7 years agoscripts/config_whitelist.txt: Resync
Tom Rini [Mon, 9 Jan 2017 01:16:00 +0000 (20:16 -0500)]
scripts/config_whitelist.txt: Resync

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agomx6ullevk: Add missing MAINTAINERS for mx6ull_14x14_evk_plugin_defconfig
Jagan Teki [Thu, 5 Jan 2017 14:32:50 +0000 (15:32 +0100)]
mx6ullevk: Add missing MAINTAINERS for mx6ull_14x14_evk_plugin_defconfig

Add 'Peng Fan' as MAINTAINERS of configs/mx6ull_14x14_evk_plugin_defconfig
which is missing in below commit
"imx: mx6ull_14x14_evk: add plugin defconfig"
(sha1: b90ebf49bb8f74afe68f696f59a0e24cc79f2031)

Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
7 years agoam335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE
Andrew F. Davis [Fri, 6 Jan 2017 22:32:12 +0000 (16:32 -0600)]
am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE

The SPL load address changes based on boot type in HS devices,
ISW_ENTRY_ADDR is used to set this address for AM43xx based SoCs
for similar reasons. Add this same logic for AM33xx devices.

Also make the default value for ISW_ENTRY_ADDR correct for GP
devices based on SoC, HS devices already pick the correct
value in their defconfig.

Signed-off-by: Andrew F. Davis <afd@ti.com>
7 years agoarm: mach-omap2: Fix secure file generation
Andrew F. Davis [Fri, 6 Jan 2017 22:20:02 +0000 (16:20 -0600)]
arm: mach-omap2: Fix secure file generation

When TI_SECURE_DEV_PKG is not defined we warn that the file '*_HS' was
not generated but generate an unsigned one anyway, first fix this
warning to say that it was generated but not secured.

When the user then exports TI_SECURE_DEV_PKG after getting this warning,
and tries to re-build, 'make' will detect the build artifacts as
unchanged and so assume they do not need to be re-generated. This causes
it to fail to sign the files and it will pack unsigned files into the
final image, even though TI_SECURE_DEV_PKG is now correctly defined and
working.

Fix this by using FORCE on the targets causes them to be re-run even if
the dependent files have not changed.

This then causes another issue. We currently rename the signed dtb files
to overwrite the non-signed ones. We do this so the 'mkimage' tool gives
the packaged dtb sections the correct name. If we do not rename the files
then SPL will not find them during boot.

Fix this by renaming the dtb files by appending _HS to the end of the
filename, after the ".dtb", this causes them to still be named correctly
in the FIT blob.

Signed-off-by: Andrew F. Davis <afd@ti.com>
7 years agoMerge branch 'master' of git://git.denx.de/u-boot-tegra
Tom Rini [Thu, 5 Jan 2017 00:41:50 +0000 (19:41 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-tegra

7 years agoMerge branch 'master' of git://git.denx.de/u-boot-spi
Tom Rini [Thu, 5 Jan 2017 00:41:23 +0000 (19:41 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-spi

7 years agopowerpc: mpc85xx: Move macro CONFIG_SYS_PPC64 to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:50 +0000 (08:43 -0800)]
powerpc: mpc85xx: Move macro CONFIG_SYS_PPC64 to Kconfig

Use Kconfig option SYS_PPC64 instead.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: mpc85xx: Move CONFIG_SYS_FSL_QORIQ_CHASSIS* to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:49 +0000 (08:43 -0800)]
powerpc: mpc85xx: Move CONFIG_SYS_FSL_QORIQ_CHASSIS* to Kconfig

Use Kconfig option to select chassis version.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: E6500: Move macro CONFIG_E6500 to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:48 +0000 (08:43 -0800)]
powerpc: E6500: Move macro CONFIG_E6500 to Kconfig

Use Kconfig option E6500 and clean up existing usage.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: mpc85xx: Remove unused ifdef in config header
York Sun [Wed, 28 Dec 2016 16:43:47 +0000 (08:43 -0800)]
powerpc: mpc85xx: Remove unused ifdef in config header

After most config options are moved to Kconfig, the unused ifdef
or elif can be removed.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agoddr: fsl: Move CONFIG_SYS_FSL_DDR_VER to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:46 +0000 (08:43 -0800)]
ddr: fsl: Move CONFIG_SYS_FSL_DDR_VER to Kconfig

Use Kconfig to select DDR version instead of using config header.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agoddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and CONFIG_SYS_NUM_DDR_CTRLS
York Sun [Wed, 28 Dec 2016 16:43:45 +0000 (08:43 -0800)]
ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and CONFIG_SYS_NUM_DDR_CTRLS

These two macros are used for the same thing, the total number of DDR
controllers for a given SoC. Use SYS_NUM_DDR_CTRLS in Kconfig and
merge existing usage.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agoddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:44 +0000 (08:43 -0800)]
ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig

Use option NUM_DDR_CONTROLLERS in ddr Kconfig and clean up existing
usage in ls102xa and fsl-layerscape. Remove all powerpc macros in
config header and board header files.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: mpc85xx: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:43 +0000 (08:43 -0800)]
powerpc: mpc85xx: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig

Use Kconfig to select errata workaround.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agommc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:42 +0000 (08:43 -0800)]
mmc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* to Kconfig

Add option SYS_FSL_ERRATUM_ESDHC111, SYS_FSL_ERRATUM_ESDHC13,
SYS_FSL_ERRATUM_ESDHC135, SYS_FSL_ERRATUM_ESDHC_A001 to mmc Kconfig.
Move existing macros to related Kconfig.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate bk4r1]
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agoarm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:41 +0000 (08:43 -0800)]
arm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig

Use Kconfig to select errata workaround.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agofsl_ddr: Move DDR config options to driver Kconfig
York Sun [Wed, 28 Dec 2016 16:43:40 +0000 (08:43 -0800)]
fsl_ddr: Move DDR config options to driver Kconfig

Create driver/ddr/fsl/Kconfig and move existing options. Clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate sbc8641d, xpedite537x and MPC8536DS, run a moveconfig.py -s]
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agopowerpc: T104xQDS: Remove macro CONFIG_T104xD4QDS
York Sun [Wed, 28 Dec 2016 16:43:39 +0000 (08:43 -0800)]
powerpc: T104xQDS: Remove macro CONFIG_T104xD4QDS

Remove this macro. It was added by e622d9ed but actually wasn't used.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: T2081QDS: Remove macro T2081QDS
York Sun [Wed, 28 Dec 2016 16:43:38 +0000 (08:43 -0800)]
powerpc: T2081QDS: Remove macro T2081QDS

Use TARGET_T2081QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: T2080RDB: Remove macro CONFIG_T2080RDB
York Sun [Wed, 28 Dec 2016 16:43:37 +0000 (08:43 -0800)]
powerpc: T2080RDB: Remove macro CONFIG_T2080RDB

Use TARGET_T2080RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: T2080QDS: Remove macro T2080QDS
York Sun [Wed, 28 Dec 2016 16:43:36 +0000 (08:43 -0800)]
powerpc: T2080QDS: Remove macro T2080QDS

Use TARGET_T2080QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: T1040QDS: Remove macro CONFIG_T1040QDS
York Sun [Wed, 28 Dec 2016 16:43:35 +0000 (08:43 -0800)]
powerpc: T1040QDS: Remove macro CONFIG_T1040QDS

Use TARGET_T1040QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: T1024RDB: Remove macro CONFIG_T1024RDB
York Sun [Wed, 28 Dec 2016 16:43:34 +0000 (08:43 -0800)]
powerpc: T1024RDB: Remove macro CONFIG_T1024RDB

Use TARGET_T1024RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Get missing hunk in board/freescale/t102xrdb/ddr.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agopowerpc: T1023RDB: Remove macro CONFIG_T1023RDB
York Sun [Wed, 28 Dec 2016 16:43:33 +0000 (08:43 -0800)]
powerpc: T1023RDB: Remove macro CONFIG_T1023RDB

Use TARGET_T1023RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014
York Sun [Wed, 28 Dec 2016 16:43:32 +0000 (08:43 -0800)]
powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014

Remove these SoCs from Kconfig because they don't have individual
configuration. Clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agocrypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:31 +0000 (08:43 -0800)]
crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig

Use Kconfig option to set little- or big-endian access to secure
boot and trust architecture.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agocrypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig
York Sun [Wed, 28 Dec 2016 16:43:30 +0000 (08:43 -0800)]
crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig

Instead of define CONFIG_SYS_FSL_SEC_COMPAT in header files for PowerPC
and ARM SoCs, move it to Kconfig under the driver.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: mpc85xx: Move CONFIG_SYS_PPC_E500_DEBUG_TLB to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:29 +0000 (08:43 -0800)]
powerpc: mpc85xx: Move CONFIG_SYS_PPC_E500_DEBUG_TLB to Kconfig

Use Kconfig SYS_PPC_E500_DEBUG_TLB and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Migrate 8572]
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agopowerpc: mpc85xx: Move CONFIG_SYS_NUM_TLBCAMS to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:28 +0000 (08:43 -0800)]
powerpc: mpc85xx: Move CONFIG_SYS_NUM_TLBCAMS to Kconfig

Use Kconfig option for SYS_NUM_TLBCAMS and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agopowerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig
York Sun [Wed, 28 Dec 2016 16:43:27 +0000 (08:43 -0800)]
powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig

Use Kconfig option for E500 and E500MC macros.

Signed-off-by: York Sun <york.sun@nxp.com>
7 years agomtd: nand: mxs_nand_spl: Fix to remove twise 'NAND' print
Jagan Teki [Mon, 2 Jan 2017 23:24:36 +0000 (00:24 +0100)]
mtd: nand: mxs_nand_spl: Fix to remove twise 'NAND' print

SPL from nand will print 'NAND' in boot_from_devices based on
the image_loader name, remove the extra 'NAND ' in mxs_nand_spl driver.

Original behaviour:
-------------------
U-Boot SPL 2017.01-rc2-gf84dd8b (Jan 02 2017 - 22:24:19)
Trying to boot from NANDNAND : 512 MiB

After the fix:
-------------
U-Boot SPL 2017.01-rc2-gf84dd8b-dirty (Jan 02 2017 - 23:17:00)
Trying to boot from NAND: 512 MiB

Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
7 years agospi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible
Vignesh R [Wed, 21 Dec 2016 05:12:33 +0000 (10:42 +0530)]
spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible

According to Section 11.15.4.9.1 Indirect Read Controller of K2G SoC
TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit
data interface reads until the last word of an indirect transfer
So, make sure that QSPI indirect reads are 32 bit sized except for the
final read. If the rxbuf is unaligned then use bounce buffer, so that
readsl() can be used instead of readsb() to avoid non 32-bit accesses.

[1]www.ti.com/lit/ug/spruhy8d/spruhy8d.pdf

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
7 years agospi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible
Vignesh R [Wed, 21 Dec 2016 05:12:32 +0000 (10:42 +0530)]
spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible

According to Section 11.15.4.9.2 Indirect Write Controller of K2G SoC
TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit
data interface writes until the last word of an indirect transfer
otherwise indirect writes is known to fails sometimes. So, make sure
that QSPI indirect writes are 32 bit sized except for the last write. If
the txbuf is unaligned then use bounce buffer to avoid data aborts.

So, now that the driver uses bounce_buffer, enable CONFIG_BOUNCE_BUFFER
for all boards that use Cadence QSPI driver.

[1]www.ti.com/lit/ug/spruhy8d/spruhy8d.pdf

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
7 years agoARM: dts: tegra: Sync paz00 with Linux 4.8
Misha Komarovskiy [Sun, 11 Dec 2016 19:28:12 +0000 (22:28 +0300)]
ARM: dts: tegra: Sync paz00 with Linux 4.8

Sync with Linux 4.8 dts plus vdd_bl regulator
to fix backlight start, display timings and USB
controller aliases fix.

Signed-off-by: Misha Komarovskiy <zombah@gmail.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
7 years agocolibri_t20: fix ulpi reset polarity
Marcel Ziswiler [Mon, 19 Dec 2016 14:38:07 +0000 (15:38 +0100)]
colibri_t20: fix ulpi reset polarity

Fix ULPI reset polarity which caused a hard hang on Colibri T20 upon
attempting to start the USB subsystem:

This fixes my late commit d5a24d8b53d350364bd429b7104ec369b817e4b8
(colibri_t20: fix usb operation and controller order) inadvertently
having overwritten Stephen's previous commit
2f6a7e8ce5df8b99d84bfd486c6f99d92322ce04 (ARM: tegra: fix USB ULPI PHY
reset signal inversion confusion).

While at it also fix comment about on-module USB port.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
7 years agoapalis_t30: comment about disabled pcie nodes
Marcel Ziswiler [Mon, 19 Dec 2016 14:38:06 +0000 (15:38 +0100)]
apalis_t30: comment about disabled pcie nodes

Add a comment about the disabled PCIe port nodes.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
7 years agopci: kconfig: fix spelling in description
Marcel Ziswiler [Mon, 19 Dec 2016 14:38:05 +0000 (15:38 +0100)]
pci: kconfig: fix spelling in description

Fix 'driver model' rather than 'driver mode' in description.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
7 years agovideo: tegra: fix spelling in comment
Marcel Ziswiler [Mon, 19 Dec 2016 14:38:04 +0000 (15:38 +0100)]
video: tegra: fix spelling in comment

Get rid of spurious 'are' in the comment.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
7 years agoARM: tegra: allow passing cboot DTB to the kernel
Stephen Warren [Fri, 2 Dec 2016 19:26:42 +0000 (12:26 -0700)]
ARM: tegra: allow passing cboot DTB to the kernel

Some users may wish to pass the cboot-supplied DTB to the booted kernel
rather than having U-Boot load the DTB itself. To allow this, expose the
address of the cboot-supplied DTB in environment variable $fdt_addr. At
least when using extlinux.conf, if the user doesn't explicitly specify
which DTB to pass to the kernel, U-Boot passes the DTB referred to by
this variable.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
7 years agoPrepare v2017.01-rc3 v2017.01-rc3
Tom Rini [Tue, 3 Jan 2017 01:00:55 +0000 (20:00 -0500)]
Prepare v2017.01-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-imx
Tom Rini [Mon, 2 Jan 2017 21:32:05 +0000 (16:32 -0500)]
Merge branch 'master' of git://denx.de/git/u-boot-imx

7 years agoudoo: neo: Fix indentation
Fabio Estevam [Mon, 2 Jan 2017 10:44:04 +0000 (08:44 -0200)]
udoo: neo: Fix indentation

The standard way is to put ifdef/endif in the very first column.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
7 years agoimx6ul: geam6ul: Enable I2C support
Jagan Teki [Wed, 21 Dec 2016 21:14:46 +0000 (22:14 +0100)]
imx6ul: geam6ul: Enable I2C support

Enable I2C support for Engicam GEAM6UL NAND module.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoimx6ul: geam6ul: Add MAINTAINERS for nand_defconfig
Jagan Teki [Wed, 21 Dec 2016 11:02:13 +0000 (12:02 +0100)]
imx6ul: geam6ul: Add MAINTAINERS for nand_defconfig

Add Jagan as MAINTAINERS of configs/imx6ul_geam_nand_defconfig

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoconfigs: engicam: Add fitboot env support
Jagan Teki [Wed, 21 Dec 2016 11:00:29 +0000 (12:00 +0100)]
configs: engicam: Add fitboot env support

Add FIT image booting from MMC device, during MMC bootcmd
u-boot env script look for bootscript, else fit image or else
finally look for legacy image uImage.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoconfigs: engicam: Cleanup on mmcboot env
Jagan Teki [Wed, 21 Dec 2016 11:00:28 +0000 (12:00 +0100)]
configs: engicam: Cleanup on mmcboot env

- Add tab space
- remove exctra 'mmc dev ${mmcdev}'

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoconfigs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY
Jagan Teki [Wed, 21 Dec 2016 11:00:27 +0000 (12:00 +0100)]
configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACY

Enabling FIT along with Signature will make bootm to
not-understanding u-boot legacy image formats like uImage, etc.
So this patch enabling legacy image format for backward compatibility.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agodefconfigs: imx6: engicam: Enable FIT
Jagan Teki [Wed, 21 Dec 2016 11:00:26 +0000 (12:00 +0100)]
defconfigs: imx6: engicam: Enable FIT

Enable Flattened Image Tree support for all Engicam boards.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoimx6: engicam: Add nandboot env support
Jagan Teki [Wed, 21 Dec 2016 11:00:25 +0000 (12:00 +0100)]
imx6: engicam: Add nandboot env support

Add config options for booting Linux from NAND in UBI format.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agodefconfigs: engicam: Enable UBI commands
Jagan Teki [Wed, 21 Dec 2016 11:00:24 +0000 (12:00 +0100)]
defconfigs: engicam: Enable UBI commands

Create ubifs.img:
$ mkfs.ubifs -q -r /rootfs -m 4096 -e 253952 -c 7936 -o ubifs.img

Write ubifs.img:
---------------
icorem6qdl> nand erase.part rootfs
icorem6qdl> ubi part rootfs
icorem6qdl> ubi create rootfs

icorem6qdl> ext4load mmc 0:2 ${loadaddr} ubifs.img
166592512 bytes read in 8091 ms (19.6 MiB/s)
icorem6qdl> ubi write ${loadaddr} rootfs ${filesize}
166592512 bytes written to volume rootfs
icorem6qdl> ubifsmount ubi0:rootfs

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agodefconfigs: engicam: Enable MMC commands in nand
Jagan Teki [Wed, 21 Dec 2016 11:00:23 +0000 (12:00 +0100)]
defconfigs: engicam: Enable MMC commands in nand

For writing Linux or rootfs on to NAND, the best suitable way
is to use MMC commands since MMC driver by default enabled by
mx6_common.h, hence enabled MMC commands in nand defconfigs.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoconfigs: engicam: Rename nand with gpmi-name in mtdparts
Jagan Teki [Wed, 21 Dec 2016 11:00:22 +0000 (12:00 +0100)]
configs: engicam: Rename nand with gpmi-name in mtdparts

gpmi-nand is the proper name used in nand driver from Linux for all
imx related nand boards, so rename mtdparts name as gpmi-nand instead
of nand, this will eventually reflects all nand info to Linux from
u-boot like mtdparts.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoimx6: engicam: Use bootm instead of bootz
Jagan Teki [Wed, 21 Dec 2016 11:00:21 +0000 (12:00 +0100)]
imx6: engicam: Use bootm instead of bootz

Boot Linux with uImage instead of zImage, so update
bootz with bootm.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoconfigs: engicam: Increase nand kernel partition size
Jagan Teki [Wed, 21 Dec 2016 11:00:20 +0000 (12:00 +0100)]
configs: engicam: Increase nand kernel partition size

Increase the nand kernel partition size, for supporting
large uImage files, maximum 8MiB.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agoarm: am57xx: cl-som-am57x: update default env
Uri Mashiach [Wed, 28 Dec 2016 16:28:36 +0000 (18:28 +0200)]
arm: am57xx: cl-som-am57x: update default env

Modify U-Boot default env settings.

Boot sequence:
1. SD card boot script
2. SD card boot no script
3. SATA boot script
4. SATA boot no script
5. eMMC boot script
6. eMMC boot no script

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoarm: am57xx: cl-som-am57x: add ETH support
Dmitry Lifshitz [Wed, 28 Dec 2016 16:28:35 +0000 (18:28 +0200)]
arm: am57xx: cl-som-am57x: add ETH support

Add MAC support.

Use PHY, connected to RGMII1 as a default Eth adapter,
by appropriate setting of 'cpsw_data.active_slave'.

'cpsw_phy' env variable can override this setting.

Set the MAC addresses in the U-Boot environment.
The addresses are retrieved from the on-board EEPROM or from the SOC's
MAC fuses.

Set the following PHYs RGMII clock delays:
- Enable RX delay
- Disable TX delay

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
[uri.mashiach@compulab.co.il: add RGMII clock delays]
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoarm: am57xx: cl-som-am57x: fetch board rev from EEPROM
Dmitry Lifshitz [Wed, 28 Dec 2016 16:28:34 +0000 (18:28 +0200)]
arm: am57xx: cl-som-am57x: fetch board rev from EEPROM

Add PCB revision message.
Implement board revision get_board_rev API.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Commit description update.
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoarm: am57xx: cl-som-am57x: add initial board support
Dmitry Lifshitz [Wed, 28 Dec 2016 16:28:33 +0000 (18:28 +0200)]
arm: am57xx: cl-som-am57x: add initial board support

Features supported :

* Serial console
* SPI Flash
* MMC/SD Card
* eMMC storage
* SATA
* PCA9555 - GPIO expander over I2C5 bus
* USB

Use spl alternate boot device feature to define fallback to
the main boot device as it is defined by hardware.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
[uri.mashiach@compulab.co.il: Adjust to v2016.11]
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
7 years agotools: binman: Use /usr/bin/env to find python executable
Emmanuel Vadot [Tue, 27 Dec 2016 21:36:08 +0000 (22:36 +0100)]
tools: binman: Use /usr/bin/env to find python executable

Some OS (all BSD and probably others) do not have python in /usr/bin
but in another directory.
It is a common usage to use /usr/bin/env python as shebang for python
scripts so use this for binman.

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
7 years agoOMAP3: omap3_logic: Remove display parameter
Adam Ford [Sat, 31 Dec 2016 12:33:46 +0000 (06:33 -0600)]
OMAP3: omap3_logic: Remove display parameter

The display is done in the device tree now, and there is no need
to pass 'display' kernel parameter any longer.

Signed-off-by: Adam Ford <aford173@gmail.com>
7 years agoARM: OMAP3_LOGIC: Remove ONENAND config options
Adam Ford [Sat, 31 Dec 2016 11:51:27 +0000 (05:51 -0600)]
ARM: OMAP3_LOGIC: Remove ONENAND config options

These boards do not and never have had ONENAND support, so let's remove it.

Signed-off-by: Adam Ford <aford173@gmail.com>
7 years agodoc/README.cfi: Update code snippet, and add example.
Robert P. J. Day [Thu, 29 Dec 2016 10:23:19 +0000 (05:23 -0500)]
doc/README.cfi: Update code snippet, and add example.

First, update the code snippet referenced in the README file. And
since there are only two boards that override flash_cmd_reset(),
might as well show them both.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
7 years agodigsy_mtc.c: Minor spelling/grammar fixes.
Robert P. J. Day [Thu, 29 Dec 2016 10:06:41 +0000 (05:06 -0500)]
digsy_mtc.c: Minor spelling/grammar fixes.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
7 years agomx6qsabreauto: Fix the EIM clock for the mx6qp variant
Fabio Estevam [Tue, 27 Dec 2016 01:04:41 +0000 (23:04 -0200)]
mx6qsabreauto: Fix the EIM clock for the mx6qp variant

On the MX6Q the aclk_eim_slow_podf field is '1' after POR, while on the
MX6DQP it is '3'.

This makes the EIM clock to be only 66MHz on the mx6qp variant, instead of
132 MHz.

Instead of relying on the POR values for the CSMR1 register, make sure to
manually configure the clk_eim_slow_sel field as '00' so that EIM clock is
derived from AXI clock and the aclk_eim_slow_podf field as '1' so that EIM
clock can be AXI clock divided by 2.

This way a consistent EIM clock frequency is configured for all the mx6
variants.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
7 years agoARM: imx7s-warp: enable USB gadget ethernet
Kevin Hilman [Fri, 16 Dec 2016 21:08:10 +0000 (13:08 -0800)]
ARM: imx7s-warp: enable USB gadget ethernet

Enable USB gadget ethernet by default to have networking capabilities.

Tested using DHCP and TFTP to transfer kernel, DT, ramdisk.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
7 years agoudoo_neo: Use 'fdtfile' variable name
Fabio Estevam [Thu, 15 Dec 2016 22:10:08 +0000 (20:10 -0200)]
udoo_neo: Use 'fdtfile' variable name

'fdtfile' is the preferred name for the variable that contains the
device tree blob according to the README file.

It also makes it consistent with other i.MX boards that use config_distro,
so change it accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
7 years agoimx: thermal: Kconfig: add MX7
Peng Fan [Fri, 2 Dec 2016 05:43:03 +0000 (13:43 +0800)]
imx: thermal: Kconfig: add MX7

The thermal drivers support i.MX6 and i.MX7, add MX7 in Kconfig file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
7 years agoMakefile: preserve output for images that can contain HAB Blocks
Sven Ebenfeld [Sun, 6 Nov 2016 15:37:58 +0000 (16:37 +0100)]
Makefile: preserve output for images that can contain HAB Blocks

To being able to sign created binaries, we need to know the HAB Blocks
for that image. Especially for the imximage type the HAB Blocks are
only available during creation of the image. We want to preserve the
information until we get to sign the files.
In the verbose case we still get them printed out instead of writing
to log files.

Cc: sbabic@denx.de
v2-Changes:
 - No usage of MKIMAGEOUTPUT_$(@F) macro.
 - Predefine default value /dev/null in every involved Makefile.

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
7 years agodoc: imx6: add section for secure boot with SPL
Sven Ebenfeld [Sun, 6 Nov 2016 15:37:57 +0000 (16:37 +0100)]
doc: imx6: add section for secure boot with SPL

Cc: sbabic@denx.de
Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
7 years agotools: mkimage: add firmware-ivt image type for HAB verification
Sven Ebenfeld [Sun, 6 Nov 2016 15:37:56 +0000 (16:37 +0100)]
tools: mkimage: add firmware-ivt image type for HAB verification

When we want to use Secure Boot with HAB from SPL over U-Boot.img,
we need to append the IVT to the image and leave space for the CSF.
Images generated as firmware_ivt can directly be signed using the
Freescale code signing tool. For creation of a CSF, mkimage outputs
the correct HAB Blocks for the image.
The changes to the usual firmware image class are quite small,
that is why I implemented that directly into the default_image.

Cc: sbabic@denx.de
v2-Changes: None

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
7 years agoarm: imx: add HAB authentication of image to SPL boot
Sven Ebenfeld [Sun, 6 Nov 2016 15:37:55 +0000 (16:37 +0100)]
arm: imx: add HAB authentication of image to SPL boot

When using HAB as secure boot mechanism on Wandboard, the chain of
trust breaks immediately after the SPL. As this is not checking
the authenticity of the loaded image before jumping to it.

The HAB status output will not be implemented in SPL as it adds
a lot of strings that are only required in debug cases. With those
it exceeds the maximum size of the available OCRAM (69 KiB).

The SPL MISC driver support must be enabled, so that the driver can use OTP fuse
to check if HAB is enabled.

Cc: sbabic@denx.de
v2-Changes: None

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
7 years agoarm: imx: remove bmode , hdmidet and dek commands from SPL
Sven Ebenfeld [Sun, 6 Nov 2016 15:37:54 +0000 (16:37 +0100)]
arm: imx: remove bmode , hdmidet and dek commands from SPL

These files are blowing up the SPL and should not be required
there as the SPL delivers no command console. Because building fails
for mx27 and mx31 machines with SPL build, we remove the linker flag
for them from the Makefile. Nothing is built for them to be linked
in that directory.

Cc: sbabic@denx.de
v2 Changes:
 - Remove mx27 and mx31 from Makefile during SPL build as nothing is built for
   them in that directory. And removing the commands with the libs-y directive
   lead to linker failures. e.g. "armv5te-ld.bfd: cannot find arch/arm/imx-common/built-in.o: No such file or directory)"

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
7 years agoudoo_neo: Remove USDHC3 entry
Fabio Estevam [Fri, 16 Dec 2016 13:18:32 +0000 (11:18 -0200)]
udoo_neo: Remove USDHC3 entry

Commit c94981efa20cc58 ("udoo_neo: Remove USDHC3 support") removed
the SDHC3 support, but missed to remove the entry from the usdhc_cfg
structure, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
7 years agommc: move MMC_SDHCI_IO_ACCESSORS to Kconfig
Masahiro Yamada [Wed, 7 Dec 2016 13:10:30 +0000 (22:10 +0900)]
mmc: move MMC_SDHCI_IO_ACCESSORS to Kconfig

This is a user-unconfigurable option that is selected by the
drivers that need to overwrite SDHCI IO memory accessors.
(BCM2835 SDHCI seems the only driver that needs to do so.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
7 years agommc: move some SDHCI related options to Kconfig
Masahiro Yamada [Wed, 7 Dec 2016 13:10:29 +0000 (22:10 +0900)]
mmc: move some SDHCI related options to Kconfig

While I moved the options, I also renamed them so that they are all
prefixed with MMC_SDHCI_.

This commit was created in the following steps.

[1] Rename with the following command
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
'

[2] create the Kconfig entries in drivers/mmc/Kconfig

[3] Move the options by the following command
tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

[4] Sort drivers/mmc/Makefile for readability

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
7 years agommc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI
Masahiro Yamada [Wed, 7 Dec 2016 13:10:28 +0000 (22:10 +0900)]
mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI

Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
My motivation for the rename is, ultimately, to make all the MMC
options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
like Linux.

This commit was created as follows:

[1] Rename the config option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

[2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

[3] run "tools/moveconfig.py -y MMC_SDHCI"

[4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
7 years agommc: make MMC driver entries dependent on MMC
Masahiro Yamada [Wed, 7 Dec 2016 13:10:27 +0000 (22:10 +0900)]
mmc: make MMC driver entries dependent on MMC

Currently, CONFIG_MMC is not related to any other options by
"depends on" or "select".  One of big advantages of using Kconfig
is automatic dependency tracking, but the current state is lacking
it.  As the first step, make the existing MMC driver entries depend
on MMC.

This commit was created by the following steps:

[1] Run the following script:

--------------------8<--------------------
rm -f tmp.txt

for d in $(find . -path './configs/*_defconfig')
do
        if grep -q -e 'CONFIG_MSM_SDHCI=y' $d ||
           grep -q -e 'CONFIG_ATMEL_SDHCI=y' $d ||
           grep -q -e 'CONFIG_ROCKCHIP_DWMMC=y' $d ||
           grep -q -e 'CONFIG_SH_SDHI=y' $d ||
           grep -q -e 'CONFIG_PIC32_SDHCI=y' $d ||
           grep -q -e 'CONFIG_ZYNQ_SDHCI=y' $d ||
           grep -q -e 'CONFIG_ROCKCHIP_SDHCI=y' $d ||
           grep -q -e 'CONFIG_MMC_UNIPHIER=y' $d ||
           grep -q -e 'CONFIG_SANDBOX_MMC=y' $d
        then
                echo CONFIG_MMC=y >> $d
                echo ${d#./configs/} >> tmp.txt
        fi
done

tools/moveconfig.py -y -s -d tmp.txt
rm tmp.txt
--------------------8<--------------------

[2] surround MMC driver entries with "if MMC" and "endif"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
7 years agommc: complete unfinished move of CONFIG_MMC
Masahiro Yamada [Wed, 7 Dec 2016 13:10:26 +0000 (22:10 +0900)]
mmc: complete unfinished move of CONFIG_MMC

Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.

We generally do not like such partial moves.  This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.

I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.

This commit was created as follows:

[1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
7 years agoSync defconfig files by savedefconfig
Masahiro Yamada [Wed, 7 Dec 2016 13:10:25 +0000 (22:10 +0900)]
Sync defconfig files by savedefconfig

Generated by "tools/moveconfig -s".

This will make config moves easier.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agoimx: mx6sllevk: add MAINTAINERS file
Peng Fan [Tue, 27 Dec 2016 12:19:07 +0000 (20:19 +0800)]
imx: mx6sllevk: add MAINTAINERS file

add MAINTAINERS files

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
7 years agoboard: samsung: update the MAINTAINERS file
Jaehoon Chung [Tue, 27 Dec 2016 11:08:13 +0000 (20:08 +0900)]
board: samsung: update the MAINTAINERS file

Update the maintainer from Przemyslaw and Lukasz to me.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
7 years agocmd: net: fix function name in comment
Baruch Siach [Tue, 27 Dec 2016 09:03:29 +0000 (11:03 +0200)]
cmd: net: fix function name in comment

In commit 7044c6bb6 (net: cosmetic: Clean up DHCP variables and functions)
BootpCopyNetParams() was renamed to store_net_params(). Update the reference in
comment.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
7 years agofs/ext4: Initialize group descriptor size for revision level 0 filesystems
Stefan Brüns [Tue, 27 Dec 2016 01:35:08 +0000 (02:35 +0100)]
fs/ext4: Initialize group descriptor size for revision level 0 filesystems

genext2fs creates revision level 0 filesystems, which are not readable
by u-boot due to the initialized group descriptor size field.
f798b1dda1c5de818b806189e523d1b75db7e72d

Reported-by: Kever Yang <kever.yang@rock-chips.com>
Reported-by: FrostyBytes@protonmail.com
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
7 years agodisk: Fixed capacity message
Jean-Jacques Hiblot [Fri, 23 Dec 2016 09:45:43 +0000 (10:45 +0100)]
disk: Fixed capacity message

With capacities getting bigger, we can see see messages with negative
numbers like "Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)".
Here the printed LBA is -387938128 when it should have been 3907029168.
To fix this, use the right format when displaying the unsigned integers.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reported-by: Yan Liu <yan-liu@ti.com>
7 years agoUpdate Maintainer and Author's email address
Ajay Bhargav [Wed, 21 Dec 2016 07:58:06 +0000 (13:28 +0530)]
Update Maintainer and Author's email address

I am not longer using my old email address
"ajay.bhargav@einfochips.com". For U-Boot development email address is
now updated to contact@8051projects.net

Signed-off-by: Ajay Bhargav <contact@8051projects.net>
7 years agotools: mkimage: Call fclose in error path
Michal Simek [Tue, 20 Dec 2016 08:58:31 +0000 (09:58 +0100)]
tools: mkimage: Call fclose in error path

This patch is fixing missing fclose() calls
in error patch introduced by:
"tools: mkimage: Use fstat instead of stat to avoid malicious hacks"
(sha1: ebe0f53f48e8f9ecc823e533a85b05c13638c350)

Reported-by: Coverity (CID: 155064, 155065)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
7 years agoREADME: remove description about CONFIG_USE_ARCH_MEMCPY/SET
Masahiro Yamada [Mon, 19 Dec 2016 10:31:04 +0000 (19:31 +0900)]
README: remove description about CONFIG_USE_ARCH_MEMCPY/SET

These options are now described in the Kconfig help.  We do not want
to maintain duplicated documentation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra
Masahiro Yamada [Mon, 19 Dec 2016 10:31:02 +0000 (19:31 +0900)]
ARM: revive CONFIG_USE_ARCH_MEMCPY/MEMSET for UniPhier and Tegra

Commit be72591bcd64 ("Kconfig: Move USE_ARCH_MEMCPY/MEMSET to
Kconfig") is misconversion.

The original logic in include/configs/uniphier.h was as follows:

  #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
  #define CONFIG_USE_ARCH_MEMSET
  #define CONFIG_USE_ARCH_MEMCPY
  #endif

This means those configs were enabled when building U-Boot proper,
but disabled when building SPL.  Likewise for Tegra.

Now "depends on !SPL" prevents any boards with SPL support
from reaching these options.  This changed the behavior for
UniPhier and Tegra SoC family.

Please notice these two options only control the U-Boot proper
build.  As you see arch/arm/Makefile, ARM-specific memset/memcpy
are never compiled for SPL.  So, __HAVE_ARCH_MEMCPY/MEMSET should
not set for SPL.

Fixes: be72591bcd64 ("Kconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
7 years agoMAINTAINERS, git-mailrc: update the Power maintainer
Jaehoon Chung [Mon, 19 Dec 2016 04:36:01 +0000 (13:36 +0900)]
MAINTAINERS, git-mailrc: update the Power maintainer

Przemyslaw didn't maintain the PMIC anymore.
Update the pmic maintainer from Przeymyslaw to me.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>