Vitaly Kuznetsov [Fri, 29 May 2020 13:04:06 +0000 (15:04 +0200)]
selftests: kvm: introduce cpu_has_svm() check
Many tests will want to check if the CPU is Intel or AMD in
guest code, add cpu_has_svm() and put it as static
inline to svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20200529130407.57176-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 19 May 2020 10:18:31 +0000 (06:18 -0400)]
KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu
This allows fetching the registers from the hsave area when setting
up the NPT shadow MMU, and is needed for KVM_SET_NESTED_STATE (which
runs long after the CR0, CR4 and EFER values in vcpu have been switched
to hold L2 guest state).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 18 May 2020 17:08:37 +0000 (13:08 -0400)]
KVM: nSVM: leave guest mode when clearing EFER.SVME
According to the AMD manual, the effect of turning off EFER.SVME while a
guest is running is undefined. We make it leave guest mode immediately,
similar to the effect of clearing the VMX bit in MSR_IA32_FEAT_CTL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 18 May 2020 17:02:15 +0000 (13:02 -0400)]
KVM: nSVM: split nested_vmcb_check_controls
The authoritative state does not come from the VMCB once in guest mode,
but KVM_SET_NESTED_STATE can still perform checks on L1's provided SVM
controls because we get them from userspace.
Therefore, split out a function to do them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 19 May 2020 13:21:04 +0000 (09:21 -0400)]
KVM: nSVM: remove HF_HIF_MASK
The L1 flags can be found in the save area of svm->nested.hsave, fish
it from there so that there is one fewer thing to migrate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 May 2020 17:28:23 +0000 (13:28 -0400)]
KVM: nSVM: remove HF_VINTR_MASK
Now that the int_ctl field is stored in svm->nested.ctl.int_ctl, we can
use it instead of vcpu->arch.hflags to check whether L2 is running
in V_INTR_MASKING mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 10:04:57 +0000 (06:04 -0400)]
KVM: nSVM: synthesize correct EXITINTINFO on vmexit
This bit was added to nested VMX right when nested_run_pending was
introduced, but it is not yet there in nSVM. Since we can have pending
events that L0 injected directly into L2 on vmentry, we have to transfer
them into L1's queue.
For this to work, one important change is required: svm_complete_interrupts
(which clears the "injected" fields from the previous VMRUN, and updates them
from svm->vmcb's EXITINTINFO) must be placed before we inject the vmexit.
This is not too scary though; VMX even does it in vmx_vcpu_run.
While at it, the nested_vmexit_inject tracepoint is moved towards the
end of nested_svm_vmexit. This ensures that the synthesized EXITINTINFO
is visible in the trace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 16:28:52 +0000 (12:28 -0400)]
KVM: SVM: preserve VGIF across VMCB switch
There is only one GIF flag for the whole processor, so make sure it is not clobbered
when switching to L2 (in which case we also have to include the V_GIF_ENABLE_MASK,
lest we confuse enable_gif/disable_gif/gif_set). When going back, L1 could in
theory have entered L2 without issuing a CLGI so make sure the svm_set_gif is
done last, after svm->vmcb->control.int_ctl has been copied back from hsave.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 16:18:27 +0000 (12:18 -0400)]
KVM: nSVM: extract svm_set_gif
Extract the code that is needed to implement CLGI and STGI,
so that we can run it from VMRUN and vmexit (and in the future,
KVM_SET_NESTED_STATE). Skip the request for KVM_REQ_EVENT unless needed,
subsuming the evaluate_pending_interrupts optimization that is found
in enter_svm_guest_mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 16:33:52 +0000 (12:33 -0400)]
KVM: nSVM: remove unnecessary if
kvm_vcpu_apicv_active must be false when nested virtualization is enabled,
so there is no need to check it in clgi_interception.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 07:50:14 +0000 (03:50 -0400)]
KVM: nSVM: synchronize VMCB controls updated by the processor on every vmexit
The control state changes on every L2->L0 vmexit, and we will have to
serialize it in the nested state. So keep it up to date in svm->nested.ctl
and just copy them back to the nested VMCB in nested_svm_vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 11:38:20 +0000 (07:38 -0400)]
KVM: nSVM: restore clobbered INT_CTL fields after clearing VINTR
Restore the INT_CTL value from the guest's VMCB once we've stopped using
it, so that virtual interrupts can be injected as requested by L1.
V_TPR is up-to-date however, and it can change if the guest writes to CR8,
so keep it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 May 2020 17:16:12 +0000 (13:16 -0400)]
KVM: nSVM: save all control fields in svm->nested
In preparation for nested SVM save/restore, store all data that matters
from the VMCB control area into svm->nested. It will then become part
of the nested SVM state that is saved by KVM_SET_NESTED_STATE and
restored by KVM_GET_NESTED_STATE, just like the cached vmcs12 for nVMX.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 18 May 2020 19:24:46 +0000 (15:24 -0400)]
KVM: nSVM: remove trailing padding for struct vmcb_control_area
Allow placing the VMCB structs on the stack or in other structs without
wasting too much space. Add BUILD_BUG_ON as a quick safeguard against typos.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 18 May 2020 19:21:22 +0000 (15:21 -0400)]
KVM: nSVM: pass vmcb_control_area to copy_vmcb_control_area
This will come in handy when we put a struct vmcb_control_area in
svm->nested.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 18 May 2020 15:07:08 +0000 (11:07 -0400)]
KVM: nSVM: clean up tsc_offset update
Use l1_tsc_offset to compute svm->vcpu.arch.tsc_offset and
svm->vmcb->control.tsc_offset, instead of relying on hsave.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 09:27:46 +0000 (05:27 -0400)]
KVM: nSVM: move MMU setup to nested_prepare_vmcb_control
Everything that is needed during nested state restore is now part of
nested_prepare_vmcb_control.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 18 May 2020 14:56:43 +0000 (10:56 -0400)]
KVM: nSVM: extract preparation of VMCB for nested run
Split out filling svm->vmcb.save and svm->vmcb.control before VMRUN.
Only the latter will be useful when restoring nested SVM state.
This patch introduces no semantic change, so the MMU setup is still
done in nested_prepare_vmcb_save. The next patch will clean up things.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 May 2020 17:07:26 +0000 (13:07 -0400)]
KVM: nSVM: extract load_nested_vmcb_control
When restoring SVM nested state, the control state cache in svm->nested
will have to be filled, but the save state will not have to be moved
into svm->vmcb. Therefore, pull the code that handles the control area
into a separate function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 May 2020 16:57:26 +0000 (12:57 -0400)]
KVM: nSVM: move map argument out of enter_svm_guest_mode
Unmapping the nested VMCB in enter_svm_guest_mode is a bit of a wart,
since the map argument is not used elsewhere in the function. There are
just two callers, and those are also the place where kvm_vcpu_map is
called, so it is cleaner to unmap there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 20 May 2020 12:37:37 +0000 (08:37 -0400)]
KVM: nVMX: always update CR3 in VMCS
vmx_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
Fixes:
04f11ef45810 ("KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 20 May 2020 12:37:37 +0000 (08:37 -0400)]
KVM: SVM: always update CR3 in VMCB
svm_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
This was was added in commit
689f3bf21628 ("KVM: x86: unify callbacks
to load paging root", 2020-03-16) just to keep the two vendor-specific
modules closer, but we'll fix VMX too.
Fixes:
689f3bf21628 ("KVM: x86: unify callbacks to load paging root")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 16 May 2020 12:50:35 +0000 (08:50 -0400)]
KVM: nSVM: correctly inject INIT vmexits
The usual drill at this point, except there is no code to remove because this
case was not handled at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 16 May 2020 12:46:00 +0000 (08:46 -0400)]
KVM: nSVM: remove exit_required
All events now inject vmexits before vmentry rather than after vmexit. Therefore,
exit_required is not set anymore and we can remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 16 May 2020 12:42:28 +0000 (08:42 -0400)]
KVM: nSVM: inject exceptions via svm_check_nested_events
This allows exceptions injected by the emulator to be properly delivered
as vmexits. The code also becomes simpler, because we can just let all
L0-intercepted exceptions go through the usual path. In particular, our
emulation of the VMX #DB exit qualification is very much simplified,
because the vmexit injection path can use kvm_deliver_exception_payload
to update DR6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 May 2020 15:21:49 +0000 (11:21 -0400)]
KVM: x86: enable event window in inject_pending_event
In case an interrupt arrives after nested.check_events but before the
call to kvm_cpu_has_injectable_intr, we could end up enabling the interrupt
window even if the interrupt is actually going to be a vmexit. This is
useless rather than harmful, but it really complicates reasoning about
SVM's handling of the VINTR intercept. We'd like to never bother with
the VINTR intercept if V_INTR_MASKING=1 && INTERCEPT_INTR=1, because in
that case there is no interrupt window and we can just exit the nested
guest whenever we want.
This patch moves the opening of the interrupt window inside
inject_pending_event. This consolidates the check for pending
interrupt/NMI/SMI in one place, and makes KVM's usage of immediate
exits more consistent, extending it beyond just nested virtualization.
There are two functional changes here. They only affect corner cases,
but overall they simplify the inject_pending_event.
- re-injection of still-pending events will also use req_immediate_exit
instead of using interrupt-window intercepts. This should have no impact
on performance on Intel since it simply replaces an interrupt-window
or NMI-window exit for a preemption-timer exit. On AMD, which has no
equivalent of the preemption time, it may incur some overhead but an
actual effect on performance should only be visible in pathological cases.
- kvm_arch_interrupt_allowed and kvm_vcpu_has_events will return true
if an interrupt, NMI or SMI is blocked by nested_run_pending. This
makes sense because entering the VM will allow it to make progress
and deliver the event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 26 May 2020 13:05:27 +0000 (09:05 -0400)]
KVM: x86: track manually whether an event has been injected
Instead of calling kvm_event_needs_reinjection, track its
future return value in a variable. This will be useful in
the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 27 May 2020 09:01:02 +0000 (11:01 +0200)]
KVM: nSVM: Preserve registers modifications done before nested_svm_vmexit()
L2 guest hang is observed after 'exit_required' was dropped and nSVM
switched to check_nested_events() completely. The hang is a busy loop when
e.g. KVM is emulating an instruction (e.g. L2 is accessing MMIO space and
we drop to userspace). After nested_svm_vmexit() and when L1 is doing VMRUN
nested guest's RIP is not advanced so KVM goes into emulating the same
instruction which caused nested_svm_vmexit() and the loop continues.
nested_svm_vmexit() is not new, however, with check_nested_events() we're
now calling it later than before. In case by that time KVM has modified
register state we may pick stale values from VMCB when trying to save
nested guest state to nested VMCB.
nVMX code handles this case correctly: sync_vmcs02_to_vmcs12() called from
nested_vmx_vmexit() does e.g 'vmcs12->guest_rip = kvm_rip_read(vcpu)' and
this ensures KVM-made modifications are preserved. Do the same for nSVM.
Generally, nested_vmx_vmexit()/nested_svm_vmexit() need to pick up all
nested guest state modifications done by KVM after vmexit. It would be
great to find a way to express this in a way which would not require to
manually track these changes, e.g. nested_{vmcb,vmcs}_get_field().
Co-debugged-with: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20200527090102.220647-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 27 May 2020 08:54:00 +0000 (01:54 -0700)]
KVM: x86: Initialize tdp_level during vCPU creation
Initialize vcpu->arch.tdp_level during vCPU creation to avoid consuming
garbage if userspace calls KVM_RUN without first calling KVM_SET_CPUID.
Fixes:
e93fd3b3e89e9 ("KVM: x86/mmu: Capture TDP level when updating CPUID")
Reported-by: syzbot+904752567107eefb728c@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200527085400.23759-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 20 May 2020 12:02:17 +0000 (08:02 -0400)]
KVM: nSVM: leave ASID aside in copy_vmcb_control_area
Restoring the ASID from the hsave area on VMEXIT is wrong, because its
value depends on the handling of TLB flushes. Just skipping the field in
copy_vmcb_control_area will do.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 16 May 2020 13:19:06 +0000 (09:19 -0400)]
KVM: nSVM: fix condition for filtering async PF
Async page faults have to be trapped in the host (L1 in this case),
since the APF reason was passed from L0 to L1 and stored in the L1 APF
data page. This was completely reversed: the page faults were passed
to the guest, a L2 hypervisor.
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
彭浩(Richard) [Thu, 21 May 2020 05:57:49 +0000 (05:57 +0000)]
kvm/x86: Remove redundant function implementations
pic_in_kernel(), ioapic_in_kernel() and irqchip_kernel() have the
same implementation.
Signed-off-by: Peng Hao <richard.peng@oppo.com>
Message-Id: <HKAPR02MB4291D5926EA10B8BFE9EA0D3E0B70@HKAPR02MB4291.apcprd02.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Haiwei Li [Mon, 18 May 2020 01:31:38 +0000 (09:31 +0800)]
KVM: Fix the indentation to match coding style
There is a bad indentation in next&queue branch. The patch looks like
fixes nothing though it fixes the indentation.
Before fixing:
if (!handle_fastpath_set_x2apic_icr_irqoff(vcpu, data)) {
kvm_skip_emulated_instruction(vcpu);
ret = EXIT_FASTPATH_EXIT_HANDLED;
}
break;
case MSR_IA32_TSCDEADLINE:
After fixing:
if (!handle_fastpath_set_x2apic_icr_irqoff(vcpu, data)) {
kvm_skip_emulated_instruction(vcpu);
ret = EXIT_FASTPATH_EXIT_HANDLED;
}
break;
case MSR_IA32_TSCDEADLINE:
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <
2f78457e-f3a7-3bc9-e237-
3132ee87f71e@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Miaohe Lin [Wed, 19 Feb 2020 02:45:48 +0000 (10:45 +0800)]
KVM: VMX: replace "fall through" with "return" to indicate different case
The second "/* fall through */" in rmode_exception() makes code harder to
read. Replace it with "return" to indicate they are different cases, only
the #DB and #BP check vcpu->guest_debug, while others don't care. And this
also improves the readability.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Message-Id: <
1582080348-20827-1-git-send-email-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 18 Feb 2020 23:40:11 +0000 (15:40 -0800)]
KVM: x86: Take an unsigned 32-bit int for has_emulated_msr()'s index
Take a u32 for the index in has_emulated_msr() to match hardware, which
treats MSR indices as unsigned 32-bit values. Functionally, taking a
signed int doesn't cause problems with the current code base, but could
theoretically cause problems with 32-bit KVM, e.g. if the index were
checked via a less-than statement, which would evaluate incorrectly for
MSR indices with bit 31 set.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200218234012.7110-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 18 Feb 2020 23:40:10 +0000 (15:40 -0800)]
KVM: x86: Remove superfluous brackets from case statement
Remove unnecessary brackets from a case statement that unintentionally
encapsulates unrelated case statements in the same switch statement.
While technically legal and functionally correct syntax, the brackets
are visually confusing and potentially dangerous, e.g. the last of the
encapsulated case statements has an undocumented fall-through that isn't
flagged by compilers due the encapsulation.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200218234012.7110-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 19 May 2020 16:51:32 +0000 (12:51 -0400)]
KVM: x86: allow KVM_STATE_NESTED_MTF_PENDING in kvm_state flags
The migration functionality was left incomplete in commit
5ef8acbdd687
("KVM: nVMX: Emulate MTF when performing instruction emulation", 2020-02-23),
fix it.
Fixes:
5ef8acbdd687 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 27 May 2020 17:10:29 +0000 (13:10 -0400)]
Merge branch 'kvm-master' into HEAD
Merge AMD fixes before doing more development work.
Paolo Bonzini [Wed, 27 May 2020 17:10:21 +0000 (13:10 -0400)]
Merge tag 'kvm-s390-next-5.8-1' of git://git./linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Cleanups for 5.8
- vsie (nesting) cleanups
- remove unneeded semicolon
Paolo Bonzini [Tue, 19 May 2020 09:04:49 +0000 (05:04 -0400)]
KVM: x86: simplify is_mmio_spte
We can simply look at bits 52-53 to identify MMIO entries in KVM's page
tables. Therefore, there is no need to pass a mask to kvm_mmu_set_mmio_spte_mask.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Sat, 23 May 2020 16:14:55 +0000 (19:14 +0300)]
KVM: x86: don't expose MSR_IA32_UMWAIT_CONTROL unconditionally
This msr is only available when the host supports WAITPKG feature.
This breaks a nested guest, if the L1 hypervisor is set to ignore
unknown msrs, because the only other safety check that the
kernel does is that it attempts to read the msr and
rejects it if it gets an exception.
Cc: stable@vger.kernel.org
Fixes:
6e3ba4abce ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20200523161455.3940-3-mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Sat, 23 May 2020 16:14:54 +0000 (19:14 +0300)]
KVM: VMX: enable X86_FEATURE_WAITPKG in KVM capabilities
Even though we might not allow the guest to use WAITPKG's new
instructions, we should tell KVM that the feature is supported by the
host CPU.
Note that vmx_waitpkg_supported checks that WAITPKG _can_ be set in
secondary execution controls as specified by VMX capability MSR, rather
that we actually enable it for a guest.
Cc: stable@vger.kernel.org
Fixes:
e69e72faa3a0 ("KVM: x86: Add support for user wait instructions")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20200523161455.3940-2-mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 27 May 2020 08:49:09 +0000 (01:49 -0700)]
KVM: x86/mmu: Set mmio_value to '0' if reserved #PF can't be generated
Set the mmio_value to '0' instead of simply clearing the present bit to
squash a benign warning in kvm_mmu_set_mmio_spte_mask() that complains
about the mmio_value overlapping the lower GFN mask on systems with 52
bits of PA space.
Opportunistically clean up the code and comments.
Cc: stable@vger.kernel.org
Fixes:
d43e2675e96fc ("KVM: x86: only do L1TF workaround on affected processors")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200527084909.23492-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 20 May 2020 07:40:09 +0000 (03:40 -0400)]
Merge tag 'noinstr-x86-kvm-2020-05-16' of git://git./linux/kernel/git/tip/tip into HEAD
Paolo Bonzini [Mon, 18 May 2020 10:30:09 +0000 (06:30 -0400)]
rcuwait: avoid lockdep splats from rcuwait_active()
rcuwait_active only returns whether w->task is not NULL. This is
exactly one of the usecases that are mentioned in the documentation
for rcu_access_pointer() where it is correct to bypass lockdep checks.
This avoids a splat from kvm_vcpu_on_spin().
Reported-by: Wanpeng Li <kernellwp@gmail.com>
Tested-by: Wanpeng Li <kernellwp@gmail.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Gleixner [Fri, 24 Apr 2020 07:57:56 +0000 (09:57 +0200)]
x86/kvm: Restrict ASYNC_PF to user space
The async page fault injection into kernel space creates more problems than
it solves. The host has absolutely no knowledge about the state of the
guest if the fault happens in CPL0. The only restriction for the host is
interrupt disabled state. If interrupts are enabled in the guest then the
exception can hit arbitrary code. The HALT based wait in non-preemotible
code is a hacky replacement for a proper hypercall.
For the ongoing work to restrict instrumentation and make the RCU idle
interaction well defined the required extra work for supporting async
pagefault in CPL0 is just not justified and creates complexity for a
dubious benefit.
The CPL3 injection is well defined and does not cause any issues as it is
more or less the same as a regular page fault from CPL3.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.369802541@linutronix.de
Thomas Gleixner [Fri, 6 Mar 2020 23:42:06 +0000 (00:42 +0100)]
x86/kvm: Sanitize kvm_async_pf_task_wait()
While working on the entry consolidation I stumbled over the KVM async page
fault handler and kvm_async_pf_task_wait() in particular. It took me a
while to realize that the randomly sprinkled around rcu_irq_enter()/exit()
invocations are just cargo cult programming. Several patches "fixed" RCU
splats by curing the symptoms without noticing that the code is flawed
from a design perspective.
The main problem is that this async injection is not based on a proper
handshake mechanism and only respects the minimal requirement, i.e. the
guest is not in a state where it has interrupts disabled.
Aside of that the actual code is a convoluted one fits it all swiss army
knife. It is invoked from different places with different RCU constraints:
1) Host side:
vcpu_enter_guest()
kvm_x86_ops->handle_exit()
kvm_handle_page_fault()
kvm_async_pf_task_wait()
The invocation happens from fully preemptible context.
2) Guest side:
The async page fault interrupted:
a) user space
b) preemptible kernel code which is not in a RCU read side
critical section
c) non-preemtible kernel code or a RCU read side critical section
or kernel code with CONFIG_PREEMPTION=n which allows not to
differentiate between #2b and #2c.
RCU is watching for:
#1 The vCPU exited and current is definitely not the idle task
#2a The #PF entry code on the guest went through enter_from_user_mode()
which reactivates RCU
#2b There is no preemptible, interrupts enabled code in the kernel
which can run with RCU looking away. (The idle task is always
non preemptible).
I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU
voodoo at all.
In #2c RCU is eventually not watching, but as that state cannot schedule
anyway there is no point to worry about it so it has to invoke
rcu_irq_enter() before running that code. This can be optimized, but this
will be done as an extra step in course of the entry code consolidation
work.
So the proper solution for this is to:
- Split kvm_async_pf_task_wait() into schedule and halt based waiting
interfaces which share the enqueueing code.
- Add comments (condensed form of this changelog) to spare others the
time waste and pain of reverse engineering all of this with the help of
uncomprehensible changelogs and code history.
- Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(),
user mode and schedulable kernel side async page faults (#1, #2a, #2b)
- Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel
case (#2c).
For this case also remove the rcu_irq_exit()/enter() pair around the
halt as it is just a pointless exercise:
- vCPUs can VMEXIT at any random point and can be scheduled out for
an arbitrary amount of time by the host and this is not any
different except that it voluntary triggers the exit via halt.
- The interrupted context could have RCU watching already. So the
rcu_irq_exit() before the halt is not gaining anything aside of
confusing the reader. Claiming that this might prevent RCU stalls
is just an illusion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
Andy Lutomirski [Fri, 28 Feb 2020 18:42:48 +0000 (10:42 -0800)]
x86/kvm: Handle async page faults directly through do_page_fault()
KVM overloads #PF to indicate two types of not-actually-page-fault
events. Right now, the KVM guest code intercepts them by modifying
the IDT and hooking the #PF vector. This makes the already fragile
fault code even harder to understand, and it also pollutes call
traces with async_page_fault and do_async_page_fault for normal page
faults.
Clean it up by moving the logic into do_page_fault() using a static
branch. This gets rid of the platform trap_init override mechanism
completely.
[ tglx: Fixed up 32bit, removed error code from the async functions and
massaged coding style ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.169270470@linutronix.de
Thomas Gleixner [Thu, 19 Mar 2020 13:53:56 +0000 (14:53 +0100)]
context_tracking: Make guest_enter/exit() .noinstr ready
Force inlining of the helpers and mark the instrumentable parts
accordingly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134341.672545766@linutronix.de
Peter Zijlstra [Wed, 18 Mar 2020 13:22:03 +0000 (14:22 +0100)]
lockdep: Prepare for noinstr sections
Force inlining and prevent instrumentation of all sorts by marking the
functions which are invoked from low level entry code with 'noinstr'.
Split the irqflags tracking into two parts. One which does the heavy
lifting while RCU is watching and the final one which can be invoked after
RCU is turned off.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134100.484532537@linutronix.de
Thomas Gleixner [Wed, 4 Mar 2020 12:09:50 +0000 (13:09 +0100)]
tracing: Provide lockdep less trace_hardirqs_on/off() variants
trace_hardirqs_on/off() is only partially safe vs. RCU idle. The tracer
core itself is safe, but the resulting tracepoints can be utilized by
e.g. BPF which is unsafe.
Provide variants which do not contain the lockdep invocation so the lockdep
and tracer invocations can be split at the call site and placed
properly. This is required because lockdep needs to be aware of the state
before switching away from RCU idle and after switching to RCU idle because
these transitions can take locks.
As these code pathes are going to be non-instrumentable the tracer can be
invoked after RCU is turned on and before the switch to RCU idle. So for
these new variants there is no need to invoke the rcuidle aware tracer
functions.
Name them so they match the lockdep counterparts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.270771162@linutronix.de
Thomas Gleixner [Mon, 9 Mar 2020 21:47:17 +0000 (22:47 +0100)]
vmlinux.lds.h: Create section for protection against instrumentation
Some code pathes, especially the low level entry code, must be protected
against instrumentation for various reasons:
- Low level entry code can be a fragile beast, especially on x86.
- With NO_HZ_FULL RCU state needs to be established before using it.
Having a dedicated section for such code allows to validate with tooling
that no unsafe functions are invoked.
Add the .noinstr.text section and the noinstr attribute to mark
functions. noinstr implies notrace. Kprobes will gain a section check
later.
Provide also a set of markers: instrumentation_begin()/end()
These are used to mark code inside a noinstr function which calls
into regular instrumentable text section as safe.
The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is
enabled as the end marker emits a NOP to prevent the compiler from merging
the annotation points. This means the objtool verification requires a
kernel compiled with this option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
Paolo Bonzini [Tue, 19 May 2020 09:34:41 +0000 (05:34 -0400)]
KVM: x86: only do L1TF workaround on affected processors
KVM stores the gfn in MMIO SPTEs as a caching optimization. These are split
in two parts, as in "[high 11111 low]", to thwart any attempt to use these bits
in an L1TF attack. This works as long as there are 5 free bits between
MAXPHYADDR and bit 50 (inclusive), leaving bit 51 free so that the MMIO
access triggers a reserved-bit-set page fault.
The bit positions however were computed wrongly for AMD processors that have
encryption support. In this case, x86_phys_bits is reduced (for example
from 48 to 43, to account for the C bit at position 47 and four bits used
internally to store the SEV ASID and other stuff) while x86_cache_bits in
would remain set to 48, and _all_ bits between the reduced MAXPHYADDR
and bit 51 are set. Then low_phys_bits would also cover some of the
bits that are set in the shadow_mmio_value, terribly confusing the gfn
caching mechanism.
To fix this, avoid splitting gfns as long as the processor does not have
the L1TF bug (which includes all AMD processors). When there is no
splitting, low_phys_bits can be set to the reduced MAXPHYADDR removing
the overlap. This fixes "npt=0" operation on EPYC processors.
Thanks to Maxim Levitsky for bisecting this bug.
Cc: stable@vger.kernel.org
Fixes:
52918ed5fcf0 ("KVM: SVM: Override default MMIO mask if memory encryption is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Mon, 11 May 2020 22:56:16 +0000 (15:56 -0700)]
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.
Fixes:
a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <
20200511225616.19557-1-jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 15 May 2020 17:47:57 +0000 (13:47 -0400)]
Merge branch 'kvm-amd-fixes' into HEAD
This topic branch will be included in both kvm/master and kvm/next
(for 5.8) in order to simplify testing of kvm/next.
David Matlack [Fri, 8 May 2020 18:22:40 +0000 (11:22 -0700)]
kvm: add halt-polling cpu usage stats
Two new stats for exposing halt-polling cpu usage:
halt_poll_success_ns
halt_poll_fail_ns
Thus sum of these 2 stats is the total cpu time spent polling. "success"
means the VCPU polled until a virtual interrupt was delivered. "fail"
means the VCPU had to schedule out (either because the maximum poll time
was reached or it needed to yield the CPU).
To avoid touching every arch's kvm_vcpu_stat struct, only update and
export halt-polling cpu usage stats if we're on x86.
Exporting cpu usage as a u64 and in nanoseconds means we will overflow at
~500 years, which seems reasonably large.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <
20200508182240.68440-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Fri, 8 May 2020 20:36:43 +0000 (13:36 -0700)]
KVM: nVMX: Migrate the VMX-preemption timer
The hrtimer used to emulate the VMX-preemption timer must be pinned to
the same logical processor as the vCPU thread to be interrupted if we
want to have any hope of adhering to the architectural specification
of the VMX-preemption timer. Even with this change, the emulated
VMX-preemption timer VM-exit occasionally arrives too late.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <
20200508203643.85477-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Fri, 8 May 2020 20:36:42 +0000 (13:36 -0700)]
KVM: nVMX: Change emulated VMX-preemption timer hrtimer to absolute
Prepare for migration of this hrtimer, by changing it from relative to
absolute. (I couldn't get migration to work with a relative timer.)
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <
20200508203643.85477-3-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Fri, 8 May 2020 20:36:41 +0000 (13:36 -0700)]
KVM: nVMX: Really make emulated nested preemption timer pinned
The PINNED bit is ignored by hrtimer_init. It is only considered when
starting the timer.
When the hrtimer isn't pinned to the same logical processor as the
vCPU thread to be interrupted, the emulated VMX-preemption timer
often fails to adhere to the architectural specification.
Fixes:
f15a75eedc18e ("KVM: nVMX: make emulated nested preemption timer pinned")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <
20200508203643.85477-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 6 May 2020 20:46:53 +0000 (13:46 -0700)]
KVM: nVMX: Remove unused 'ops' param from nested_vmx_hardware_setup()
Remove a 'struct kvm_x86_ops' param that got left behind when the nested
ops were moved to their own struct.
Fixes:
33b22172452f0 ("KVM: x86: move nested-related kvm_x86_ops to a separate struct")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200506204653.14683-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Wed, 6 May 2020 13:17:56 +0000 (08:17 -0500)]
KVM: SVM: Remove unnecessary V_IRQ unsetting
This has already been handled in the prior call to svm_clear_vintr().
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
1588771076-73790-5-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Wed, 6 May 2020 13:17:55 +0000 (08:17 -0500)]
KVM: SVM: Merge svm_enable_vintr into svm_set_vintr
Code clean up and remove unnecessary intercept check for
INTERCEPT_VINTR.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
1588771076-73790-4-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Wed, 6 May 2020 15:44:01 +0000 (11:44 -0400)]
KVM: VMX: Handle preemption timer fastpath
This patch implements a fastpath for the preemption timer vmexit. The vmexit
can be handled quickly so it can be performed with interrupts off and going
back directly to the guest.
Testing on SKX Server.
cyclictest in guest(w/o mwait exposed, adaptive advance lapic timer is default -1):
5540.5ns -> 4602ns 17%
kvm-unit-test/vmexit.flat:
w/o avanced timer:
tscdeadline_immed: 3028.5 -> 2494.75 17.6%
tscdeadline: 5765.7 -> 5285 8.3%
w/ adaptive advance timer default -1:
tscdeadline_immed: 3123.75 -> 2583 17.3%
tscdeadline: 4663.75 -> 4537 2.7%
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1588055009-12677-8-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 28 Apr 2020 06:23:28 +0000 (14:23 +0800)]
KVM: X86: TSCDEADLINE MSR emulation fastpath
This patch implements a fast path for emulation of writes to the TSCDEADLINE
MSR. Besides shortcutting various housekeeping tasks in the vCPU loop,
the fast path can also deliver the timer interrupt directly without going
through KVM_REQ_PENDING_TIMER because it runs in vCPU context.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1588055009-12677-7-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 5 May 2020 10:45:35 +0000 (06:45 -0400)]
KVM: x86: introduce kvm_can_use_hv_timer
Replace the ad hoc test in vmx_set_hv_timer with a test in the caller,
start_hv_timer. This test is not Intel-specific and would be duplicated
when introducing the fast path for the TSC deadline MSR.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 28 Apr 2020 06:23:27 +0000 (14:23 +0800)]
KVM: VMX: Optimize posted-interrupt delivery for timer fastpath
While optimizing posted-interrupt delivery especially for the timer
fastpath scenario, I measured kvm_x86_ops.deliver_posted_interrupt()
to introduce substantial latency because the processor has to perform
all vmentry tasks, ack the posted interrupt notification vector,
read the posted-interrupt descriptor etc.
This is not only slow, it is also unnecessary when delivering an
interrupt to the current CPU (as is the case for the LAPIC timer) because
PIR->IRR and IRR->RVI synchronization is already performed on vmentry
Therefore skip kvm_vcpu_trigger_posted_interrupt in this case, and
instead do vmx_sync_pir_to_irr() on the EXIT_FASTPATH_REENTER_GUEST
fastpath as well.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1588055009-12677-6-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 28 Apr 2020 06:23:25 +0000 (14:23 +0800)]
KVM: X86: Introduce more exit_fastpath_completion enum values
Adds a fastpath_t typedef since enum lines are a bit long, and replace
EXIT_FASTPATH_SKIP_EMUL_INS with two new exit_fastpath_completion enum values.
- EXIT_FASTPATH_EXIT_HANDLED kvm will still go through it's full run loop,
but it would skip invoking the exit handler.
- EXIT_FASTPATH_REENTER_GUEST complete fastpath, guest can be re-entered
without invoking the exit handler or going
back to vcpu_run
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1588055009-12677-4-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 28 Apr 2020 06:23:26 +0000 (14:23 +0800)]
KVM: X86: Introduce kvm_vcpu_exit_request() helper
Introduce kvm_vcpu_exit_request() helper, we need to check some conditions
before enter guest again immediately, we skip invoking the exit handler and
go through full run loop if complete fastpath but there is stuff preventing
we enter guest again immediately.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1588055009-12677-5-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 8 May 2020 23:53:48 +0000 (16:53 -0700)]
KVM: x86: Print symbolic names of VMX VM-Exit flags in traces
Use __print_flags() to display the names of VMX flags in VM-Exit traces
and strip the flags when printing the basic exit reason, e.g. so that a
failed VM-Entry due to invalid guest state gets recorded as
"INVALID_STATE FAILED_VMENTRY" instead of "0x80000021".
Opportunstically fix misaligned variables in the kvm_exit and
kvm_nested_vmexit_inject tracepoints.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200508235348.19427-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 28 Apr 2020 06:23:23 +0000 (14:23 +0800)]
KVM: VMX: Introduce generic fastpath handler
Introduce generic fastpath handler to handle MSR fastpath, VMX-preemption
timer fastpath etc; move it after vmx_complete_interrupts() in order to
catch events delivered to the guest, and abort the fast path in later
patches. While at it, move the kvm_exit tracepoint so that it is printed
for fastpath vmexits as well.
There is no observed performance effect for the IPI fastpath after this patch.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
1588055009-12677-2-git-send-email-wanpengli@tencent.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 28 Apr 2020 23:10:25 +0000 (16:10 -0700)]
KVM: nVMX: Drop superfluous VMREAD of vmcs02.GUEST_SYSENTER_*
Don't propagate GUEST_SYSENTER_* from vmcs02 to vmcs12 on nested VM-Exit
as the vmcs12 fields are updated in vmx_set_msr(), and writes to the
corresponding MSRs are always intercepted by KVM when running L2.
Dropping the propagation was intended to be done in the same commit that
added vmcs12 writes in vmx_set_msr()[1], but for reasons unknown was
only shuffled around[2][3].
[1] https://patchwork.kernel.org/patch/
10933215
[2] https://patchwork.kernel.org/patch/
10933215/#
22682289
[3] https://lore.kernel.org/patchwork/patch/1088643
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200428231025.12766-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 28 Apr 2020 23:10:24 +0000 (16:10 -0700)]
KVM: nVMX: Truncate writes to vmcs.SYSENTER_EIP/ESP for 32-bit vCPU
Explicitly truncate the data written to vmcs.SYSENTER_EIP/ESP on WRMSR
if the virtual CPU doesn't support 64-bit mode. The SYSENTER address
fields in the VMCS are natural width, i.e. bits 63:32 are dropped if the
CPU doesn't support Intel 64 architectures. This behavior is visible to
the guest after a VM-Exit/VM-Exit roundtrip, e.g. if the guest sets bits
63:32 in the actual MSR.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200428231025.12766-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Uros Bizjak [Mon, 4 May 2020 15:57:06 +0000 (17:57 +0200)]
KVM: VMX: Improve handle_external_interrupt_irqoff inline assembly
Improve handle_external_interrupt_irqoff inline assembly in several ways:
- remove unneeded %c operand modifiers and "$" prefixes
- use %rsp instead of _ASM_SP, since we are in CONFIG_X86_64 part
- use $-16 immediate to align %rsp
- remove unneeded use of __ASM_SIZE macro
- define "ss" named operand only for X86_64
The patch introduces no functional changes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <
20200504155706.2516956-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Thu, 16 Apr 2020 15:59:13 +0000 (11:59 -0400)]
KVM: Documentation: Fix up cpuid page
0x4b564d00 and 0x4b564d01 belong to KVM_FEATURE_CLOCKSOURCE2.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20200416155913.267562-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Thu, 16 Apr 2020 15:59:10 +0000 (11:59 -0400)]
KVM: X86: Sanity check on gfn before removal
The index returned by kvm_async_pf_gfn_slot() will be removed when an
async pf gfn is going to be removed. However kvm_async_pf_gfn_slot()
is not reliable in that it can return the last key it loops over even
if the gfn is not found in the async gfn array. It should never
happen, but it's still better to sanity check against that to make
sure no unexpected gfn will be removed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20200416155910.267514-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Thu, 16 Apr 2020 15:59:06 +0000 (11:59 -0400)]
KVM: No need to retry for hva_to_pfn_remapped()
hva_to_pfn_remapped() calls fixup_user_fault(), which has already
handled the retry gracefully. Even if "unlocked" is set to true, it
means that we've got a VM_FAULT_RETRY inside fixup_user_fault(),
however the page fault has already retried and we should have the pfn
set correctly. No need to do that again.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20200416155906.267462-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Thu, 16 Apr 2020 15:58:59 +0000 (11:58 -0400)]
KVM: X86: Force ASYNC_PF_PER_VCPU to be power of two
Forcing the ASYNC_PF_PER_VCPU to be power of two is much easier to be
used rather than calling roundup_pow_of_two() from time to time. Do
this by adding a BUILD_BUG_ON() inside the hash function.
Another point is that generally async pf does not allow concurrency
over ASYNC_PF_PER_VCPU after all (see kvm_setup_async_pf()), so it
does not make much sense either to have it not a power of two or some
of the entries will definitely be wasted.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20200416155859.267366-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Uros Bizjak [Mon, 27 Apr 2020 20:50:35 +0000 (22:50 +0200)]
KVM: VMX: Remove unneeded __ASM_SIZE usage with POP instruction
POP [mem] defaults to the word size, and the only legal non-default
size is 16 bits, e.g. a 32-bit POP will #UD in 64-bit mode and vice
versa, no need to use __ASM_SIZE macro to force operating mode.
Changes since v1:
- Fix commit message.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <
20200427205035.1594232-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 28 Apr 2020 02:37:14 +0000 (19:37 -0700)]
KVM: x86/mmu: Add a helper to consolidate root sp allocation
Add a helper, mmu_alloc_root(), to consolidate the allocation of a root
shadow page, which has the same basic mechanics for all flavors of TDP
and shadow paging.
Note, __pa(sp->spt) doesn't need to be protected by mmu_lock, sp->spt
points at a kernel page.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200428023714.31923-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 28 Apr 2020 00:54:22 +0000 (17:54 -0700)]
KVM: x86/mmu: Drop KVM's hugepage enums in favor of the kernel's enums
Replace KVM's PT_PAGE_TABLE_LEVEL, PT_DIRECTORY_LEVEL and PT_PDPE_LEVEL
with the kernel's PG_LEVEL_4K, PG_LEVEL_2M and PG_LEVEL_1G. KVM's
enums are borderline impossible to remember and result in code that is
visually difficult to audit, e.g.
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PT_PDPE_LEVEL;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PT_DIRECTORY_LEVEL;
else
ept_lpage_level = PT_PAGE_TABLE_LEVEL;
versus
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PG_LEVEL_1G;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PG_LEVEL_2M;
else
ept_lpage_level = PG_LEVEL_4K;
No functional change intended.
Suggested-by: Barret Rhoden <brho@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200428005422.4235-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 28 Apr 2020 00:54:21 +0000 (17:54 -0700)]
KVM: x86/mmu: Move max hugepage level to a separate #define
Rename PT_MAX_HUGEPAGE_LEVEL to KVM_MAX_HUGEPAGE_LEVEL and make it a
separate define in anticipation of dropping KVM's PT_*_LEVEL enums in
favor of the kernel's PG_LEVEL_* enums.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200428005422.4235-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 28 Apr 2020 00:54:20 +0000 (17:54 -0700)]
KVM: x86/mmu: Tweak PSE hugepage handling to avoid 2M vs 4M conundrum
Change the PSE hugepage handling in walk_addr_generic() to fire on any
page level greater than PT_PAGE_TABLE_LEVEL, a.k.a. PG_LEVEL_4K. PSE
paging only has two levels, so "== 2" and "> 1" are functionally the
same, i.e. this is a nop.
A future patch will drop KVM's PT_*_LEVEL enums in favor of the kernel's
PG_LEVEL_* enums, at which point "walker->level == PG_LEVEL_2M" is
semantically incorrect (though still functionally ok).
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200428005422.4235-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xiaoyao Li [Wed, 29 Apr 2020 15:43:12 +0000 (23:43 +0800)]
kvm: x86: Cleanup vcpu->arch.guest_xstate_size
vcpu->arch.guest_xstate_size lost its only user since commit
df1daba7d1cb
("KVM: x86: support XSAVES usage in the host"), so clean it up.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <
20200429154312.1411-1-xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 11 May 2020 22:05:29 +0000 (15:05 -0700)]
KVM: nVMX: Tweak handling of failure code for nested VM-Enter failure
Use an enum for passing around the failure code for a failed VM-Enter
that results in VM-Exit to provide a level of indirection from the final
resting place of the failure code, vmcs.EXIT_QUALIFICATION. The exit
qualification field is an unsigned long, e.g. passing around
'u32 exit_qual' throws up red flags as it suggests KVM may be dropping
bits when reporting errors to L1. This is a red herring because the
only defined failure codes are 0, 2, 3, and 4, i.e. don't come remotely
close to overflowing a u32.
Setting vmcs.EXIT_QUALIFICATION on entry failure is further complicated
by the MSR load list, which returns the (1-based) entry that failed, and
the number of MSRs to load is a 32-bit VMCS field. At first blush, it
would appear that overflowing a u32 is possible, but the number of MSRs
that can be loaded is hardcapped at 4096 (limited by MSR_IA32_VMX_MISC).
In other words, there are two completely disparate types of data that
eventually get stuffed into vmcs.EXIT_QUALIFICATION, neither of which is
an 'unsigned long' in nature. This was presumably the reasoning for
switching to 'u32' when the related code was refactored in commit
ca0bde28f2ed6 ("kvm: nVMX: Split VMCS checks from nested_vmx_run()").
Using an enum for the failure code addresses the technically-possible-
but-will-never-happen scenario where Intel defines a failure code that
doesn't fit in a 32-bit integer. The enum variables and values will
either be automatically sized (gcc 5.4 behavior) or be subjected to some
combination of truncation. The former case will simply work, while the
latter will trigger a compile-time warning unless the compiler is being
particularly unhelpful.
Separating the failure code from the failed MSR entry allows for
disassociating both from vmcs.EXIT_QUALIFICATION, which avoids the
conundrum where KVM has to choose between 'u32 exit_qual' and tracking
values as 'unsigned long' that have no business being tracked as such.
To cement the split, set vmcs12->exit_qualification directly from the
entry error code or failed MSR index instead of bouncing through a local
variable.
Opportunistically rename the variables in load_vmcs12_host_state() and
vmx_set_nested_state() to call out that they're ignored, set exit_reason
on demand on nested VM-Enter failure, and add a comment in
nested_vmx_load_msr() to call out that returning 'i + 1' can't wrap.
No functional change intended.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200511220529.11402-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 2 May 2020 04:32:34 +0000 (21:32 -0700)]
KVM: x86/mmu: Capture TDP level when updating CPUID
Snapshot the TDP level now that it's invariant (SVM) or dependent only
on host capabilities and guest CPUID (VMX). This avoids having to call
kvm_x86_ops.get_tdp_level() when initializing a TDP MMU and/or
calculating the page role, and thus avoids the associated retpoline.
Drop the WARN in vmx_get_tdp_level() as updating CPUID while L2 is
active is legal, if dodgy.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200502043234.12481-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 2 May 2020 04:32:33 +0000 (21:32 -0700)]
KVM: VMX: Move nested EPT out of kvm_x86_ops.get_tdp_level() hook
Separate the "core" TDP level handling from the nested EPT path to make
it clear that kvm_x86_ops.get_tdp_level() is used if and only if nested
EPT is not in use (kvm_init_shadow_ept_mmu() calculates the level from
the passed in vmcs12->eptp). Add a WARN_ON() to enforce that the
kvm_x86_ops hook is not called for nested EPT.
This sets the stage for snapshotting the non-"nested EPT" TDP page level
during kvm_cpuid_update() to avoid the retpoline associated with
kvm_x86_ops.get_tdp_level() when resetting the MMU, a relatively
frequent operation when running a nested guest.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200502043234.12481-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 2 May 2020 04:32:31 +0000 (21:32 -0700)]
KVM: VMX: Add proper cache tracking for CR0
Move CR0 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs in the (uncommon) case where kvm_read_cr0()
is called multiple times in a single VM-Exit, and more importantly
eliminates a kvm_x86_ops hook, saves a retpoline on SVM when reading
CR0, and squashes the confusing naming discrepancy of "cache_reg" vs.
"decache_cr0_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200502043234.12481-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 2 May 2020 04:32:30 +0000 (21:32 -0700)]
KVM: VMX: Add proper cache tracking for CR4
Move CR4 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs and retpolines (when configured) during
nested VMX transitions as kvm_read_cr4_bits() is invoked multiple times
on each transition, e.g. when stuffing CR0 and CR3.
As an added bonus, this eliminates a kvm_x86_ops hook, saves a retpoline
on SVM when reading CR4, and squashes the confusing naming discrepancy
of "cache_reg" vs. "decache_cr4_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200502043234.12481-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 2 May 2020 04:32:26 +0000 (21:32 -0700)]
KVM: nVMX: Unconditionally validate CR3 during nested transitions
Unconditionally check the validity of the incoming CR3 during nested
VM-Enter/VM-Exit to avoid invoking kvm_read_cr3() in the common case
where the guest isn't using PAE paging. If vmcs.GUEST_CR3 hasn't yet
been cached (common case), kvm_read_cr3() will trigger a VMREAD. The
VMREAD (~30 cycles) alone is likely slower than nested_cr3_valid()
(~5 cycles if vcpu->arch.maxphyaddr gets a cache hit), and the poor
exchange only gets worse when retpolines are enabled as the call to
kvm_x86_ops.cache_reg() will incur a retpoline (60+ cycles).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200502043234.12481-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 2 May 2020 04:32:25 +0000 (21:32 -0700)]
KVM: x86: Save L1 TSC offset in 'struct kvm_vcpu_arch'
Save L1's TSC offset in 'struct kvm_vcpu_arch' and drop the kvm_x86_ops
hook read_l1_tsc_offset(). This avoids a retpoline (when configured)
when reading L1's effective TSC, which is done at least once on every
VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200502043234.12481-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 6 May 2020 23:58:50 +0000 (16:58 -0700)]
KVM: nVMX: Skip IBPB when temporarily switching between vmcs01 and vmcs02
Skip the Indirect Branch Prediction Barrier that is triggered on a VMCS
switch when temporarily loading vmcs02 to synchronize it to vmcs12, i.e.
give copy_vmcs02_to_vmcs12_rare() the same treatment as
vmx_switch_vmcs().
Make vmx_vcpu_load() static now that it's only referenced within vmx.c.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200506235850.22600-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 1 May 2020 16:31:17 +0000 (09:31 -0700)]
KVM: nVMX: Skip IBPB when switching between vmcs01 and vmcs02
Skip the Indirect Branch Prediction Barrier that is triggered on a VMCS
switch when running with spectre_v2_user=on/auto if the switch is
between two VMCSes in the same guest, i.e. between vmcs01 and vmcs02.
The IBPB is intended to prevent one guest from attacking another, which
is unnecessary in the nested case as it's the same guest from KVM's
perspective.
This all but eliminates the overhead observed for nested VMX transitions
when running with CONFIG_RETPOLINE=y and spectre_v2_user=on/auto, which
can be significant, e.g. roughly 3x on current systems.
Reported-by: Alexander Graf <graf@amazon.com>
Cc: KarimAllah Raslan <karahmed@amazon.de>
Cc: stable@vger.kernel.org
Fixes:
15d45071523d ("KVM/x86: Add IBPB support")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200501163117.4655-1-sean.j.christopherson@intel.com>
[Invert direction of bool argument. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 27 Apr 2020 17:18:37 +0000 (10:18 -0700)]
KVM: VMX: Use accessor to read vmcs.INTR_INFO when handling exception
Use vmx_get_intr_info() when grabbing the cached vmcs.INTR_INFO in
handle_exception_nmi() to ensure the cache isn't stale. Bypassing the
caching accessor doesn't cause any known issues as the cache is always
refreshed by handle_exception_nmi_irqoff(), but the whole point of
adding the proper caching mechanism was to avoid such dependencies.
Fixes:
8791585837f6 ("KVM: VMX: Cache vmcs.EXIT_INTR_INFO using arch avail_reg flags")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200427171837.22613-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 27 Apr 2020 15:55:59 +0000 (11:55 -0400)]
KVM: x86: handle wrap around 32-bit address space
KVM is not handling the case where EIP wraps around the 32-bit address
space (that is, outside long mode). This is needed both in vmx.c
and in emulate.c. SVM with NRIPS is okay, but it can still print
an error to dmesg due to integer overflow.
Reported-by: Nick Peterson <everdox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jason Yan [Mon, 20 Apr 2020 12:38:05 +0000 (20:38 +0800)]
kvm/eventfd: remove unneeded conversion to bool
The '==' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
virt/kvm/eventfd.c:724:38-43: WARNING: conversion to bool not needed
here
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Message-Id: <
20200420123805.4494-1-yanaijie@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Davidlohr Bueso [Fri, 24 Apr 2020 05:48:37 +0000 (22:48 -0700)]
kvm: Replace vcpu->swait with rcuwait
The use of any sort of waitqueue (simple or regular) for
wait/waking vcpus has always been an overkill and semantically
wrong. Because this is per-vcpu (which is blocked) there is
only ever a single waiting vcpu, thus no need for any sort of
queue.
As such, make use of the rcuwait primitive, with the following
considerations:
- rcuwait already provides the proper barriers that serialize
concurrent waiter and waker.
- Task wakeup is done in rcu read critical region, with a
stable task pointer.
- Because there is no concurrency among waiters, we need
not worry about rcuwait_wait_event() calls corrupting
the wait->task. As a consequence, this saves the locking
done in swait when modifying the queue. This also applies
to per-vcore wait for powerpc kvm-hv.
The x86 tscdeadline_latency test mentioned in
8577370fb0cb
("KVM: Use simple waitqueue for vcpu->wq") shows that, on avg,
latency is reduced by around 15-20% with this change.
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-mips@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <
20200424054837.5138-6-dave@stgolabs.net>
[Avoid extra logic changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Davidlohr Bueso [Fri, 24 Apr 2020 05:48:36 +0000 (22:48 -0700)]
rcuwait: Introduce rcuwait_active()
This call is lockless and thus should not be trusted blindly.
For example, the return value of rcuwait_wakeup() should be used to
track whether a process was woken up.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <
20200424054837.5138-5-dave@stgolabs.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Davidlohr Bueso [Fri, 24 Apr 2020 05:48:35 +0000 (22:48 -0700)]
rcuwait: Introduce prepare_to and finish_rcuwait
This allows further flexibility for some callers to implement
ad-hoc versions of the generic rcuwait_wait_event(). For example,
kvm will need this to maintain tracing semantics. The naming
is of course similar to what waitqueue apis offer.
Also go ahead and make use of rcu_assign_pointer() for both task
writes as it will make the __rcu sparse people happy - this will
be the special nil case, thus no added serialization.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <
20200424054837.5138-4-dave@stgolabs.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Davidlohr Bueso [Fri, 24 Apr 2020 05:48:34 +0000 (22:48 -0700)]
rcuwait: Let rcuwait_wake_up() return whether or not a task was awoken
Propagating the return value of wake_up_process() back to the caller
can come in handy for future users, such as for statistics or
accounting purposes.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <
20200424054837.5138-3-dave@stgolabs.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Davidlohr Bueso [Fri, 24 Apr 2020 05:48:33 +0000 (22:48 -0700)]
rcuwait: Fix stale wake call name in comment
The 'trywake' name was renamed to simply 'wake', update the comment.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <
20200424054837.5138-2-dave@stgolabs.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>