Konrad Zapalowicz [Sat, 16 Aug 2014 14:58:08 +0000 (16:58 +0200)]
staging: dgnc: Remove unnecessary dgnc_Major_Control_Registered variable
The dgnc_Major_Control_Registered variable purpose was to act as a flag
to indicate if the character device has been successfully registered
into the kernel. This flag was later checked in the module cleanup
function to know if the character device needs to be deregistered.
However the {device,class}_destroy and unregister_chrdev functions may
be called with 'invalid' data perfectly fine. This means that this
variable is not needed and can safely be removed which is what this
commit does.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad Zapalowicz [Sat, 16 Aug 2014 14:58:07 +0000 (16:58 +0200)]
staging: dgnc: Remove not needed dgnc_driver_start variable
The dgnc_driver_start variable purpose was to indicate if the driver
'start' routine has been called. Now, because the 'start' routine can
only be called once this variable is not needed thus this commit
removes it.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad Zapalowicz [Sat, 16 Aug 2014 14:58:06 +0000 (16:58 +0200)]
staging: dgnc: Remove driver-wide polling counter variable
The polling counter variable is only exposed via sysfs and has no other
purpose.
Now, since the polling shall be implemented as a board specific feature
rather than being global in the driver this counter is obsolete.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad Zapalowicz [Sat, 16 Aug 2014 14:58:05 +0000 (16:58 +0200)]
staging: dgnc: Remove driver-wide state variable
This commit removes the driver's global state variable. This is ok
because the state was changed only once at the end of init phase thus
the future usage of this variable is pointless.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Purnendu Kapadia [Fri, 15 Aug 2014 17:20:30 +0000 (18:20 +0100)]
staging: android: fix attribute as suggested by checkpatch
we should use __packed attribute
Signed-off-by: Purnendu Kapadia <pro8linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeshwanth Kumar N K [Thu, 14 Aug 2014 20:11:04 +0000 (01:41 +0530)]
staging: wlan-ng: prism2mgmt.c Fix break not useful
Fixed up warnings, break is not useful after return statement.
And the exit Label is deleted, now returning inline.
Signed-off-by: Jeshwanth Kumar N K <jeshkumar555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hema Prathaban [Sat, 16 Aug 2014 18:37:32 +0000 (00:07 +0530)]
staging: lustre: lustre: libcfs: pr_warn instead printk
This patch fixes the following warning using checkpatch.pl
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then
dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hema Prathaban [Sat, 16 Aug 2014 18:57:48 +0000 (00:27 +0530)]
staging: lustre: lustre: libcfs: do not use assignment in if condition
This patch fixes the following error using checkpatch.pl
Error: do not use assignment in if condition
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 15 Aug 2014 16:55:56 +0000 (12:55 -0400)]
staging/lustre: get rid of obd_* typedefs
We have a bunch of typedefs for common things that made no sense
and hid the actual type from plain view.
Replace them with proper uXX or sXX types.
Exception is in lustre_idl.h where
they are replaced with __uXX and __sXX to be able to be included
in userspace
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 15 Aug 2014 16:55:55 +0000 (12:55 -0400)]
staging/lustre: get rid of seqno_t and mdsno_t typedefs
seqno_t is u64 and mdsno_t is u32 so just use them as such.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Sun, 17 Aug 2014 16:17:04 +0000 (09:17 -0700)]
staging: vt6655: Convert DBG_PRT to pr_<level>
DBG_PRT uses are unnecessarily complex.
Convert DBG_PRT msglevel to pr_<level>.
This changes the KERN_<level> type of several uses.
It also enables dynamic_debug for the pr_debug conversions.
This patch can be a prelude to converting these pr_<level>
uses to dev_<level> as appropriate.
Other changes:
Realign arguments of these conversions.
Remove now unused static int msglevel declarations.
Remove now unused DBG_PRT #define.
Compile tested only.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Fri, 15 Aug 2014 16:48:13 +0000 (12:48 -0400)]
staging/lustre/llite: Fix integer overflow in ll_fid2path
Reported by Dan Carpenter <dan.carpenter@oracle.com>
outsize = sizeof(*gfout) + gfin->gf_pathlen;
Where outsize is int and gf_pathlen is u32 from userspace
can lead to integer overflowwhere outsize is some small number
less than sizeof(*gfout)
Add a check for pathlen to be of sensical size.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/11412
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5476
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Zago [Fri, 15 Aug 2014 16:48:12 +0000 (12:48 -0400)]
staging/lustre/llite: optimize ll_fid2path()
The only parameter from userspace that matters is the length of the
buffer. We don't need to allocate then import the whole structure. By
importing only that length, we can save a memory allocation.
Add sparse annotations to that function.
Signed-off-by: frank zago <fzago@cray.com>
Reviewed-on: http://review.whamcloud.com/11167
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5389
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 15 Aug 2014 16:48:11 +0000 (12:48 -0400)]
staging/lustre/llite: hold inode mutex around ll_setattr_raw()
ll_setattr_raw() expects to be called with the inode mutex held so do
when calling it from ll_hsm_import().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/11349
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5456
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 15 Aug 2014 16:48:10 +0000 (12:48 -0400)]
staging/lustre/clio: reorder initialization in cl_req_alloc()
In cl_req_alloc() ensure that the list heads crq_pages and crq_layers
have been initialized before passing the request to
cl_req_completion(). This fixes an oops in the error path.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/11009
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5290
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Fri, 15 Aug 2014 16:48:09 +0000 (12:48 -0400)]
staging/lustre/ldlm: drop redundant ibits lock interoperability check
In very old release (older than Lustre-1.8), if the client talks with
the server that does not support ibits lock, then the client needs to
convert it as plain lock. Such interoperability check and convertion
is out of date for a long time. Drop it.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-on: http://review.whamcloud.com/11004
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4971
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Cassella [Fri, 15 Aug 2014 16:48:08 +0000 (12:48 -0400)]
staging/lustre/llite: Make sure ft_flags is valid
In ll_fault0, the 'fault' struct is mostly cleared before the call to
cl_io_loop, but ft_flags is not reset. It is ordinarily set by
the call to filemap_fault in vvp_io_kernel_fault, but if Lustre
returns before calling filemap_fault, it still has the old value of
ft_flags.
ll_fault0 will then consume the ft_flags field. If it has the
VM_FAULT_RETRY bit set, it will be used as ll_fault0() and
ll_fault()'s return value.
This is a problem when VM_FAULT_RETRY is in ft_flags:
When fault/filemap_fault return with that flag set, they have already
released the mmap semaphore, and do_page_fault does not need to
release it.
Incorrectly returning this flag from ll_fault means mmap_sem
is not upped in the kernel's do_page_fault().
In addition to clearing ft_flags, this patch does not use it unless
it is valid. It's potentially misleading to return ft_flags in
"fault_ret" if ft_flags has not been set by filemap_fault.
This adds clarity, but does not change the current behavior:
When not valid, ft_flags is replaced by fault_ret, which is zero,
as is ft_flags when not set by filemap_fault.
Signed-off-by: Patrick Farrell <paf@cray.com>
Reviewed-on: http://review.whamcloud.com/10956
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5291
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 15 Aug 2014 16:48:07 +0000 (12:48 -0400)]
staging/lustre/mdc: cleanup intent if mdc_finish_enqueue() fails
In mdc_enqueue() clear the lock handle, lock mode, and request stored
in the lookup intent if mdc_finish_enqueue() fails.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/10963
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5289
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathaniel Clark [Fri, 15 Aug 2014 16:48:06 +0000 (12:48 -0400)]
staging/lustre/llite: check for integer overflow in hsm user request
Check to make sure total size of request does not overflow when
calculated. Return -1 from hur_len() if it does overflow.
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/10615
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4984
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Artemiy Volkov [Thu, 14 Aug 2014 06:20:09 +0000 (16:20 +1000)]
Staging: wlan-ng: Merge string literals on adjacent lines in prism2fw.c
This patch fixes the 'quoted string split across lines' checkpatch.pl
warning in prism2fw.c.
Signed-off-by: Artemiy Volkov <artemiyv@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vibi sreenivasan [Tue, 12 Aug 2014 14:39:27 +0000 (14:39 +0000)]
staging/mt29f_spinand: coding style fixes
This patch fixes the coding style error :
"WARNING: else is not generally useful after a break or return"
reported by checkpatch.pl
Signed-off-by: Vibi Sreenivasan <vibisreenivasan@linuxmail.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:29 +0000 (11:41 -0700)]
staging: comedi: 8255: provide common defines for registers
There are a couple comedi drivers that duplicate some of the register
defines used by the 8255 module. Move these defines into the header
so the duplication can be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:28 +0000 (11:41 -0700)]
staging: comedi: 8255: handle memory mapped io
The drivers that use this module with memory mapped io all have the
ioremap'ed base address stored in the comedi_device 'mmio' member.
Introduce a default (*io) function that does 8-bit memory mapped io.
Modify subdev_8255_init() so that it takes a flag parameter indicating
if the io is port or memory mapped. Make the function static and rename
it to __subdev_8255_init().
Introduce two exported wrappers for __subdev_8255_init():
subdev_8255_init() - for drivers that do 8-bit port io
subdev_8255_mm_init() - for drivers that do 8-bit memory mapped io
Use subdev_8255_mm_init() in the drivers that do 8-bit memory mapped io
and remove the private (*io) functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:27 +0000 (11:41 -0700)]
staging: comedi: 8255: remove incomplete async command support
The async command support in this module is incomplete and nothing
has ever used it. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:26 +0000 (11:41 -0700)]
staging: comedi: 8255: refactor how the (*io) function works
Currently, all users of is module that use the default (*io) function
pass an 'iobase' to subdev_8255_init() of the form:
dev->iobase + OFFSET_TO_8255_BASE_REG
Now that the (*io) callback includes the comedi_device 'dev' pointer
the 'dev->iobase' does not need to be included.
Modify the default (*io) function, subdev_8255_io(), to automatically
add the dev->iobase to the address when reading/writing the port.
For aesthetics, rename the subdevice private data member to 'regbase'.
Also, rename the local variables in this module that are used to
access this member.
Add a comment in dev_8255_attach() about the 'iobase' that is passed
to subdev_8255_init(). For manually attached 8255 devices the io
region is requested with __comedi_request_region() which does not
set dev->iobase. For these devices the 'regbase' is actually the
'iobase'.
Remove the, now unnecessary, dev->iobase from all the callers of
subdev_8255_init(). There are a couple drivers that only passed the
dev->iobase. For those drivers pass a 'regbase' of 0x00.
Note that the das16m1 driver is a bit goofy. The devpriv->extra_iobase
is requested using __comedi_request_region() which does not set the
dev->iobase. But the starting address passed is dev->iobase + DAS16M1_82C55
so a 'regbase' of DAS16M1_82C55 is passed to subdev_8255_init().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:25 +0000 (11:41 -0700)]
staging: comedi: 8255_pci: tidy up pci_8255_mmio()
The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.
Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (i * 4).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:24 +0000 (11:41 -0700)]
staging: comedi: cb_pcidas64: tidy up dio_callback_4020()
The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.
Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (I8255_4020_REG).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:23 +0000 (11:41 -0700)]
staging: comedi: cb_pcidas64: tidy up dio_callback()
The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.
Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (DIO_8255_OFFSET).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:22 +0000 (11:41 -0700)]
staging: comedi: daqboard2000: tidy up daqboard2000_8255_cb()
The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.
Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (dioP2ExpansionIO8Bit).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:21 +0000 (11:41 -0700)]
staging: comedi: ni_labpc: tidy up labpc_8255_mmio()
The 8255 driver (*io) callback now includes the comedi_device pointer.
Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (DIO_BASE_REG).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:20 +0000 (11:41 -0700)]
staging: comedi: ni_mio_common: tidy up ni_8255_callback()
The 8255 driver (*io) callback now includes the comedi_device pointer.
Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (Port_A).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:19 +0000 (11:41 -0700)]
staging: comedi: 8255: add a comedi_device param to the (*io) callback
The 8255 driver uses an (*io) callback to read/write the registers
of the 8255 device. The default callback provided by the driver uses
inb()/outb() calls to access to registers based on an 'iobase' that
was initialized during the subdev_8255_init() and a 'port' value.
The users of this module can optionally provide a custom (*io) callback
to handle the read/write in another manner.
Make the (*io) callback a bit more flexible by also passing the
comedi_device pointer as a parameter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:18 +0000 (11:41 -0700)]
staging: comedi: amplc_pci230: refactor iobase addresses
This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 2 is saved in the private data as
'iobase1' and the address in PCI bar 3 is saved in the comedi_device
as the 'iobase'. The 'iobase' is the base address of the daq
registers (ai/ao) of the board. The 'iobase1' address is the base
address of the 8255, 8254, configuration, and interrupt registers.
Flip the saving of these base addresses. Save the address from PCI
bar 2 in the comedi_device 'iobase' and the address from PCI bar 3
in the private data as 'daqio'.
This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:17 +0000 (11:41 -0700)]
staging: comedi: cb_pcidda: refactor iobase addresses
This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 3 is saved in the comedi_device as
the 'iobase' and the one in PCI bar 2 is just passed to subdev_8255_init()
as the 'iobase' parameter.
Save the PCI bar 3 address in the private data as 'daqio' and the
address from PCI bar 2 in the comedi_device as the 'iobase'.
This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:16 +0000 (11:41 -0700)]
staging: comedi: cb_pcimdas: refactor iobase addresses
This driver uses three iobase addresses, found in PCI bars 2, 3, and 4.
Currently, the address in PCI bar 2 is saved in the comedi_device as
the 'iobase', the PCI bar 3 address is saved in the private data as
'BADR3' and the one in PCI bar 4 is just passed to subdev_8255_init()
as the 'iobase' parameter.
Flip the saving of the PCI bar 2 and 4 base addresses. Save the address
from PCI bar 2 in the private data as the 'daqio' and the address from
PCI bar 4 in the comedi_device as the 'iobase'.
This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:41:15 +0000 (11:41 -0700)]
staging: comedi: cb_pcidas: use dev->iobase for PCI bar 3
Currently the base address of the 8254 and 8255 devices, found in
PCI bar 3, is saved in the private data as 'pacer_counter_dio'.
The 'iobase' in the comedi_device is currently unused.
Save the address from PCI bar 3 in the comedi_device and remove
the unnecessary member from the private data.
This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:23 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200: remove dio200_common_detach()
This exported function just does a free_irq() to release the interrupt
handler for the legacy and PCI dio200 drivers.
The legacy driver also calls comedi_legacy_detach() which would also
do the free_irq(). For that driver the just use comedi_legacy_detach()
directly for the (*detach).
For the PCI driver, add the free_irq() to the private (*datach) function.
Remove the, then unused, dio200_common_detach() function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:22 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200: absorb dio200_subdev_timer_init()
This function is only called by amplc_dio200_common_attach() and it
can never fail. For aesthetics, absorb it into that function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:21 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200.h: remove boardinfo 'mainshift'
This member of the boardinfo is only set for the PCIE boards. Use the
'is_pcie' flag to determine if the offset needs to be shifted when
reading/writing the registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:20 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200.h: rename 'has_enhancements' in boardinfo
This member of the boardinfor is only set for the PCIE boards. For
aeshetics, rename it to 'is_pcie'.
For clarity, use this flag in the (*auto_attach) to determine if the
dio200_pcie_board_setup() function needs to be called instead of using
the switch (context_model).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:19 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200.h: remove unnecessary function comment descriptions
The function names provide enough description. The extra comments are not
necessary. Remove them.
Also, tidy up some of the function declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:18 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200.h: remove struct dio200_layout definition
This struct is used to provide part of the boardinfo data. Using the extra
indirection does not provide any additional clarity to the driver.
Absorb the members from dio200_layout into dio200_board and remove the
extra 'layout' indirection.
For aesthetics, rename all the local variables used for the boardinfo
pointer to 'board'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:17 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200: tidy up {comedi, pci}_driver declarations
For aesthetics, add some whitespace to these declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 12 Aug 2014 18:17:16 +0000 (11:17 -0700)]
staging: comedi: amplc_dio200: tidy up comedi_driver declaration
For aesthetics, add some whitespace to the declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chase Southwood [Tue, 12 Aug 2014 02:03:48 +0000 (21:03 -0500)]
staging: comedi: addi_apci_1564: tidy register map defines
This commit performs a final tidying of the register map defines, bringing
them to a state that is ready for merging into addi_apci_1564.c when the
time comes. Actions performed include:
*Removes the APCI1564_ADDRESS_RANGE macro, which is no longer needed/used.
*Renames the APCI1564_DIGITAL_OP_{VCC,CC}_INTERRUPT_{ENABLE,DISABLE}
macros to shorter names which are more consistent with the digital input
interrupt macros.
*Fixes a typo in a comment (dev>iobase changed to dev->iobase).
*Renames the APCI1564_TCW_* macros to APCI1564_COUNTER_* names to more
accurately reflect that they are only offsets to counter registers (since
only the counters are offset from dev->iobase).
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengraver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chase Southwood [Tue, 12 Aug 2014 02:03:19 +0000 (21:03 -0500)]
staging: comedi: addi_apci_1564: Remove in-driver watchdog support code
Starting with commit
1496e5961113 ("staging: comedi: addi_apci_1564: use
addi_watchdog module to init watchdog subdevice"), this driver uses the
addi_watchdog module to provide support for the watchdog subdevice. Any
remaining watchdog code in-driver can and should be removed.
This will also make future work on the timer and counter subdevices easier.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chase Southwood [Tue, 12 Aug 2014 02:02:58 +0000 (21:02 -0500)]
staging: comedi: addi_apci_1564: remove apci1564_do_config
The DO config function served the purpose of configuring the diagnostic
interrupts for the board. As the driver currently does not support
diagnostic interrupts, the digital output subdevice does not need an
insn_config operation and this function can be safely removed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ramesh Basukala [Thu, 14 Aug 2014 14:11:44 +0000 (10:11 -0400)]
Staging: bmc: fix coding style warning
This is a patch to the vendorspecificextn.c that fixes coding style
warning message line over 80 characters found by checkpatch.pl script.
I am submitting this patch as required by Eudyptula Challenge.
Signed-off-by: Ramesh Basukala <basukalaramesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phong Tran [Wed, 13 Aug 2014 13:37:06 +0000 (20:37 +0700)]
staging: android: ion: Remove redundant return of void function
This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phong Tran [Wed, 13 Aug 2014 13:37:05 +0000 (20:37 +0700)]
staging: android: ion: ion.c Add a new blank line after decleration
This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phong Tran [Wed, 13 Aug 2014 13:37:04 +0000 (20:37 +0700)]
staging: android: ion: ion_dummy_driver.c Replace kzalloc() by kcalloc()
This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Remonda [Sun, 10 Aug 2014 18:39:57 +0000 (20:39 +0200)]
Staging: rtl8188eu: Removed unneeded code.
This patch removes some unneeded code.
1) kzalloc() allocates 4 extra bytes so that we can align the return
value. But actually the return value is already aligned so we can
remove the + 4 and the call to N_BYTE_ALIGMENT().
2) The memset() isn't needed because kzalloc() zeroes the allocation.
Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Remonda [Sun, 10 Aug 2014 18:39:56 +0000 (20:39 +0200)]
Staging: rtl8188eu: Lines over 80 characters fixed.
This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line
over 80 characters" warning found by the checkpatch.pl tool.
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:35 +0000 (20:14 +0530)]
staging: rtl8188eu: Declare Efuse_GetCurrentSize() as a static function
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:34 +0000 (20:14 +0530)]
staging: rtl8188eu: rtw_iol.h: Remove unused struct, enum and macro
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:33 +0000 (20:14 +0530)]
staging: rtl8188eu: rtw_iol.c: Remove unused functions
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:32 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function iol_ioconfig()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:31 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove rtl8188e_IOL_exec_cmds_sync() and its wrapper function
rtl8188e_IOL_exec_cmds_sync() is a unused function.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:30 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function rtw_IOL_cmd_buf_dump()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:29 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function rtw_IOL_cmd_tx_pkt_buf_dump()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:28 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused functions rtw_IOL_append_DELAY_[US, MS]_cmd()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:27 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function rtw_IOL_exec_cmds_sync()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:26 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function rtw_IOL_append_WD_cmd()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:25 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function rtw_IOL_cmd_boundary_handle()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:24 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function rtw_IOL_accquire_xmit_frame()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:23 +0000 (20:14 +0530)]
staging: rtl8188eu: Hal8188EPhyCfg.h: Remove unused function declaration
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:22 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function storePwrIndexDiffRateOffset()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:21 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove odm_RegConfig8188E.[h, c] files
driver doesn't require these files anymore.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:20 +0000 (20:14 +0530)]
staging: rtl8188eu: Cleanup and simplify Baseband configuration code
Cleanup and consolidate Baseband configuration related code in
HalHWImg8188E_BB.c file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:19 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function odm_ConfigMAC_8188E()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:18 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused function odm_ConfigRFReg_8188E()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:17 +0000 (20:14 +0530)]
staging: rtl8188eu: Remove unused functions odm_ConfigRF_Radio[A, B]_8188E()
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:16 +0000 (20:14 +0530)]
staging: rtl8188eu: Cleanup and simplify RF configuration code
Cleanup and consolidate RF configuration related code in
HalHWImg8188E_RF.c file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:15 +0000 (20:14 +0530)]
staging: rtl8188eu: Cleanup and simplify MAC configuration code
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
navin patidar [Sun, 10 Aug 2014 14:44:14 +0000 (20:14 +0530)]
staging: rtl8188eu: Cleanup firmware initialization code
Using rtl8188ee's (drivers/net/wireless/rtlwifi/rtl8188ee/fw.c) neat and clean
firmware initialization code to replace rtl8188eu's messy firmware
initialization code.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremiah Mahler [Tue, 12 Aug 2014 07:03:44 +0000 (00:03 -0700)]
staging: rtl8192u/ieee80211: Fix sparse ieee80211_debug_init/_exit not declared warning
A sparse warning is generated about 'ieee80211_debug_init' and
'ieee80211_debug_exit' not being declared.
drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:275:12: warning:
symbol 'ieee80211_debug_init' was not declared. Should it be static?
drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:297:13: warning:
symbol 'ieee80211_debug_exit' was not declared. Should it be static?
These functions are used outside of this file so using static will not
work. The prototypes are given in r8192U_core.c but sparse nonetheless
still gives a warning. Fix the sparse warning by moving these
prototypes from r8192U_core.c to ieee80211.h.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Cc: Joel Pelaez Jorge <joelpelaez@gmail.com>
Cc: Andrea Merello <andrea.merello@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Joe Perches <joe@perches.com>
Cc: Himangi Saraogi <himangi774@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: Ana Rey <anarey@gmail.com>
Cc: Chaitanya Hazarey <c@24.io>
Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ovidiu Toader [Mon, 11 Aug 2014 03:04:36 +0000 (20:04 -0700)]
drivers/staging/rtl8192u/r8192U_wx.c: fix warnings issued by sparse
This minor patch motivated by eudyptula challenge fixes the following warnings issued
by `sparse' in drivers/staging/rtl8192u/r8192U_wx.c:
.../r8192U_wx.c:27:5: warning: symbol 'rtl8180_rates' was not declared. Should it be static?
.../r8192U_wx.c:961:22: warning: symbol 'r8192_get_wireless_stats' was not declared. Should it be static?
.../r8192U_wx.c:990:24: warning: symbol 'r8192_wx_handlers_def' was not declared. Should it be static?
Signed-off-by: Ovidiu Toader <ovi@phas.ubc.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:11 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "uiOperation" -> "operation"
Renamed variable "uiOperation" -> "operation" in
bcm_char_ioctl_gpio_set_request().
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:10 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "uiBit" -> "bit"
Renamed variable "uiBit" -> "bit" in bcm_char_ioctl_gpio_set_request().
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:09 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "ucResetValue" -> "reset_val"
Renamed variable "ucResetValue" -> "reset_val" in
bcm_char_ioctl_gpio_set_request().
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:08 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "uiTempVar" -> "tmp"
Renamed variable "uiTempVar" -> "tmp" in
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_eeprom_reg_read()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:07 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "sWrmBuffer" -> "wrm_buff"
Renamed variable "sWrmBuffer" -> "wrm_buff" in
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_eeprom_reg_read()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:06 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "Bufflen" -> "buff_len"
Renamed variable "Bufflen" -> "buff_len" in
bcm_char_ioctl_reg_read_private().
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:05 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "IoBuffer" -> "io_buff"
Renamed variable "IoBuffer" -> "io_buff" in
bcm_char_ioctl_reg_read_private()
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_eeprom_reg_read()
bcm_char_ioctl_gpio_set_request()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:04 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "sRdmBuffer" -> "rdm_buff"
Renamed variable "sRdmBuffer" -> "rdm_buff" in
bcm_char_ioctl_reg_read_private()
bcm_char_ioctl_reg_write_private()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:03 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "Packet" -> "packet"
Renamed variable "Packet" -> "packet" in bcm_char_read().
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:02 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "PktLen" -> "pkt_len"
Renamed variable "PktLen" -> "pkt_len" in bcm_char_read().
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:01 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "pTarang" -> "tarang"
Renamed variable "pTarang" -> "tarang" in
bcm_char_open()
bcm_char_release()
bcm_char_read()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:32:00 +0000 (14:32 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "ulDSDMagicNumInUsrBuff" -> "dsd_magic_num_in_usr_buff"
Renamed variable "ulDSDMagicNumInUsrBuff" ->
"dsd_magic_num_in_usr_buff" in handle_flash2x_adapter().
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:31:59 +0000 (14:31 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "Status" -> "status"
Renamed variable "Status" -> "status" in
bcm_handle_nvm_read_cmd()
handle_flash2x_adapter()
bcm_char_ioctl_reg_read_private()
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_eeprom_reg_read()
bcm_char_ioctl_gpio_set_request()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:31:58 +0000 (14:31 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "stNVMReadWrite" -> "nvm_rw"
Renamed variable "stNVMReadWrite" -> "nvm_rw" in
bcm_handle_nvm_read_cmd()
handle_flash2x_adapter()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:31:57 +0000 (14:31 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "pReadData" -> "read_data"
Renamed variable "pReadData" -> "read_data" in
bcm_handle_nvm_read_cmd()
handle_flash2x_adapter()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:31:56 +0000 (14:31 +0200)]
Staging: bcm: Bcmchar.c: Renamed variable "Adapter" -> "ad"
Renamed variable "Adapter" -> "ad" in
bcm_handle_nvm_read_cmd()
handle_flash2x_adapter()
bcm_char_open()
bcm_char_release()
bcm_char_read()
bcm_char_ioctl_reg_read_private()
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_reg_write_private()
bcm_char_ioctl_eeprom_reg_read()
bcm_char_ioctl_gpio_set_request()
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Beyer [Sun, 10 Aug 2014 12:31:55 +0000 (14:31 +0200)]
Staging: bcm: Bcmchar.c: Fixed indentation of function arguments
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hema Prathaban [Thu, 14 Aug 2014 07:20:04 +0000 (12:50 +0530)]
staging: lustre: lustre: ptlrpc: Donot initialise null
This patch fixes the following error using checkpatch.pl
Error: Do not initialise statics to 0 or NULL
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hema Prathaban [Wed, 13 Aug 2014 10:52:41 +0000 (16:22 +0530)]
staging: lustre: lustre: ptlrpc: Fix pointer declaration
This patch fixes the following checkpatch.pl issue in client.c:
ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hema Prathaban [Tue, 12 Aug 2014 11:56:38 +0000 (17:26 +0530)]
staging: lustre: lustre: ptlrpc: Fix requires space
Fix checkpatch.pl issues spaces required.
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Tue, 12 Aug 2014 02:18:29 +0000 (22:18 -0400)]
staging/lustre/lnet: Fix potential uninitialized variable warning
Greg reports that with one of the patches in his queue
there's now an unused variable warning in lnet_parse_ip2nets
for ipaddrs variable.
Apparently the warning is a false positive as in all cases where
lnet_ipaddr_enumerate can return without setting ipaddrs to something
a negative return value is returned that is then checked
before we actually use ipaddrs.
Assign ipaddrs to NULL to quiet this.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srikrishan Malik [Mon, 11 Aug 2014 18:27:39 +0000 (23:57 +0530)]
staging: lustre: Cleanup variable declarations in mdc_enqueue()
Changes:
- move const union vars to the top
- move rc to bottom
- do not initialize req
- set lvb_type to enum member instead of 0
- change __u64 to u64
- fix inconsistant columnization
Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srikrishan Malik [Mon, 11 Aug 2014 18:27:38 +0000 (23:57 +0530)]
staging: lustre: remove parentheses usage with return
Fix the following checkpatch error:
ERROR: return is not a function, parentheses are not required
Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-exynos.git / log