Darrick J. Wong [Fri, 7 Jul 2023 01:00:59 +0000 (18:00 -0700)]
xfs: fix uninit warning in xfs_growfs_data
Quiet down this gcc warning:
fs/xfs/xfs_fsops.c: In function ‘xfs_growfs_data’:
fs/xfs/xfs_fsops.c:219:21: error: ‘lastag_extended’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
219 | if (lastag_extended) {
| ^~~~~~~~~~~~~~~
fs/xfs/xfs_fsops.c:100:33: note: ‘lastag_extended’ was declared here
100 | bool lastag_extended;
| ^~~~~~~~~~~~~~~
By setting its value explicitly. From code analysis I don't think this
is a real problem, but I have better things to do than analyse this
closely.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Yang Li [Mon, 3 Jul 2023 16:38:50 +0000 (09:38 -0700)]
xfs: Remove unneeded semicolon
./fs/xfs/xfs_extfree_item.c:723:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5728
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Darrick J. Wong [Thu, 29 Jun 2023 17:15:45 +0000 (10:15 -0700)]
xfs: AGI length should be bounds checked
Similar to the recent patch strengthening the AGF agf_length
verification, the AGI verifier does not check that the AGI length field
is within known good bounds. This isn't currently checked by runtime
kernel code, yet we assume in many places that it is correct and verify
other metadata against it.
Add length verification to the AGI verifier. Just like the AGF length
checking, the length of the AGI must be equal to the size of the AG
specified in the superblock, unless it is the last AG in the filesystem.
In that case, it must be less than or equal to sb->sb_agblocks and
greater than XFS_MIN_AG_BLOCKS, which is the smallest AG a growfs
operation will allow to exist.
There's only one place in the filesystem that actually uses agi_length,
but let's not leave it vulnerable to the same weird nonsense that
generates syzbot bugs, eh?
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Shiyang Ruan [Fri, 30 Jun 2023 00:40:30 +0000 (17:40 -0700)]
xfs: fix the calculation for "end" and "length"
The value of "end" should be "start + length - 1".
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Darrick J. Wong [Fri, 30 Jun 2023 00:39:46 +0000 (17:39 -0700)]
xfs: fix xfs_btree_query_range callers to initialize btree rec fully
Use struct initializers to ensure that the xfs_btree_irecs passed into
the query_range function are completely initialized. No functional
changes, just closing some sloppy hygiene.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong [Fri, 30 Jun 2023 00:39:45 +0000 (17:39 -0700)]
xfs: validate fsmap offsets specified in the query keys
Improve the validation of the fsmap offset fields in the query keys and
move the validation to the top of the function now that we have pushed
the low key adjustment code downwards.
Also fix some indenting issues that aren't worth a separate patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong [Fri, 30 Jun 2023 00:39:45 +0000 (17:39 -0700)]
xfs: fix logdev fsmap query result filtering
The external log device fsmap backend doesn't have an rmapbt to query,
so it's wasteful to spend time initializing the rmap_irec objects.
Worse yet, the log could (someday) be longer than 2^32 fsblocks, so
using the rmap irec structure will result in integer overflows.
Fix this mess by computing the start address that we want from keys[0]
directly, and use the daddr-based record filtering algorithm that we
also use for rtbitmap queries.
Fixes:
e89c041338ed ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong [Fri, 30 Jun 2023 00:39:44 +0000 (17:39 -0700)]
xfs: clean up the rtbitmap fsmap backend
The rtbitmap fsmap backend doesn't query the rmapbt, so it's wasteful to
spend time initializing the rmap_irec objects. Worse yet, the logic to
query the rtbitmap is spread across three separate functions, which is
unnecessarily difficult to follow.
Compute the start rtextent that we want from keys[0] directly and
combine the functions to avoid passing parameters around everywhere, and
consolidate all the logic into a single function. At one point many
years ago I intended to use __xfs_getfsmap_rtdev as the launching point
for realtime rmapbt queries, but this hasn't been the case for a long
time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong [Fri, 30 Jun 2023 00:39:44 +0000 (17:39 -0700)]
xfs: fix getfsmap reporting past the last rt extent
The realtime section ends at the last rt extent. If the user configures
the rt geometry with an extent size that is not an integer factor of the
number of rt blocks, it's possible for there to be rt blocks past the
end of the last rt extent. These tail blocks cannot ever be allocated
and will cause corruption reports if the last extent coincides with the
end of an rt bitmap block, so do not report consider them for the
GETFSMAP output.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong [Fri, 30 Jun 2023 00:39:43 +0000 (17:39 -0700)]
xfs: fix integer overflows in the fsmap rtbitmap and logdev backends
It's not correct to use the rmap irec structure to hold query key
information to query the rtbitmap because the realtime volume can be
longer than 2^32 fsblocks in length. Because the rt volume doesn't have
allocation groups, introduce a daddr-based record filtering algorithm
and compute the rtextent values using 64-bit variables. The same
problem exists in the external log device fsmap implementation, so use
the same solution to fix it too.
After this patch, all the code that touches info->low and info->high
under xfs_getfsmap_logdev and __xfs_getfsmap_rtdev are unnecessary.
Cleaning this up will be done in subsequent patches.
Fixes:
4c934c7dd60c ("xfs: report realtime space information via the rtbitmap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong [Fri, 30 Jun 2023 00:39:43 +0000 (17:39 -0700)]
xfs: fix interval filtering in multi-step fsmap queries
I noticed a bug in ranged GETFSMAP queries:
# xfs_io -c 'fsmap -vvvv' /opt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 8:80 [0..7]: static fs metadata 0 (0..7) 8
<snip>
9: 8:80 [192..223]: 137 0..31 0 (192..223) 32
# xfs_io -c 'fsmap -vvvv -d 208 208' /opt
#
That's not right -- we asked what block maps block 208, and we should've
received a mapping for inode 137 offset 16. Instead, we get nothing.
The root cause of this problem is a mis-interaction between the fsmap
code and how btree ranged queries work. xfs_btree_query_range returns
any btree record that overlaps with the query interval, even if the
record starts before or ends after the interval. Similarly, GETFSMAP is
supposed to return a recordset containing all records that overlap the
range queried.
However, it's possible that the recordset is larger than the buffer that
the caller provided to convey mappings to userspace. In /that/ case,
userspace is supposed to copy the last record returned to fmh_keys[0]
and call GETFSMAP again. In this case, we do not want to return
mappings that we have already supplied to the caller. The call to
xfs_btree_query_range is the same, but now we ignore any records that
start before fmh_keys[0].
Unfortunately, we didn't implement the filtering predicate correctly.
The predicate should only be called when we're calling back for more
records. Accomplish this by setting info->low.rm_blockcount to a
nonzero value and ensuring that it is cleared as necessary. As a
result, we no longer want to adjust dkeys[0] in the main setup function
because that's confusing.
This patch doesn't touch the logdev/rtbitmap backends because they have
bigger problems that will be addressed by subsequent patches.
Found via xfs/556 with parent pointers enabled.
Fixes:
e89c041338ed ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Dave Chinner [Wed, 28 Jun 2023 18:04:34 +0000 (11:04 -0700)]
xfs: fix bounds check in xfs_defer_agfl_block()
Need to happen before we allocate and then leak the xefi. Found by
coverity via an xfsprogs libxfs scan.
[djwong: This also fixes the type of the @agbno argument.]
Fixes:
7dfee17b13e5 ("xfs: validate block number being freed before adding to xefi")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Thu, 29 Jun 2023 02:43:55 +0000 (19:43 -0700)]
xfs: AGF length has never been bounds checked
The AGF verifier does not check that the AGF length field is within
known good bounds. This has never been checked by runtime kernel
code (i.e. the lack of verification goes back to 1993) yet we assume
in many places that it is correct and verify other metdata against
it.
Add length verification to the AGF verifier. The length of the AGF
must be equal to the size of the AG specified in the superblock,
unless it is the last AG in the filesystem. In that case, it must be
less than or equal to sb->sb_agblocks and greater than
XFS_MIN_AG_BLOCKS, which is the smallest AG a growfs operation will
allow to exist.
This requires a bit of rework of the verifier function. We want to
verify metadata before we use it to verify other metadata. Hence
we need to verify the AGF sequence numbers before using them to
verify the length of the AGF. Then we can verify the AGF length
before we verify AGFL fields. Then we can verifier other fields that
are bounds limited by the AGF length.
And, finally, by calculating agf_length only once into a local
variable, we can collapse repeated "if (xfs_has_foo() &&"
conditionaly checks into single checks. This makes the code much
easier to follow as all the checks for a given feature are obviously
in the same place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Wed, 28 Jun 2023 18:04:33 +0000 (11:04 -0700)]
xfs: journal geometry is not properly bounds checked
If the journal geometry results in a sector or log stripe unit
validation problem, it indicates that we cannot set the log up to
safely write to the the journal. In these cases, we must abort the
mount because the corruption needs external intervention to resolve.
Similarly, a journal that is too large cannot be written to safely,
either, so we shouldn't allow those geometries to mount, either.
If the log is too small, we risk having transaction reservations
overruning the available log space and the system hanging waiting
for space it can never provide. This is purely a runtime hang issue,
not a corruption issue as per the first cases listed above. We abort
mounts of the log is too small for V5 filesystems, but we must allow
v4 filesystems to mount because, historically, there was no log size
validity checking and so some systems may still be out there with
undersized logs.
The problem is that on V4 filesystems, when we discover a log
geometry problem, we skip all the remaining checks and then allow
the log to continue mounting. This mean that if one of the log size
checks fails, we skip the log stripe unit check. i.e. we allow the
mount because a "non-fatal" geometry is violated, and then fail to
check the hard fail geometries that should fail the mount.
Move all these fatal checks to the superblock verifier, and add a
new check for the two log sector size geometry variables having the
same values. This will prevent any attempt to mount a log that has
invalid or inconsistent geometries long before we attempt to mount
the log.
However, for the minimum log size checks, we can only do that once
we've setup up the log and calculated all the iclog sizes and
roundoffs. Hence this needs to remain in the log mount code after
the log has been initialised. It is also the only case where we
should allow a v4 filesystem to continue running, so leave that
handling in place, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Wed, 28 Jun 2023 18:04:33 +0000 (11:04 -0700)]
xfs: don't block in busy flushing when freeing extents
If the current transaction holds a busy extent and we are trying to
allocate a new extent to fix up the free list, we can deadlock if
the AG is entirely empty except for the busy extent held by the
transaction.
This can occur at runtime processing an XEFI with multiple extents
in this path:
__schedule+0x22f at
ffffffff81f75e8f
schedule+0x46 at
ffffffff81f76366
xfs_extent_busy_flush+0x69 at
ffffffff81477d99
xfs_alloc_ag_vextent_size+0x16a at
ffffffff8141711a
xfs_alloc_ag_vextent+0x19b at
ffffffff81417edb
xfs_alloc_fix_freelist+0x22f at
ffffffff8141896f
xfs_free_extent_fix_freelist+0x6a at
ffffffff8141939a
__xfs_free_extent+0x99 at
ffffffff81419499
xfs_trans_free_extent+0x3e at
ffffffff814a6fee
xfs_extent_free_finish_item+0x24 at
ffffffff814a70d4
xfs_defer_finish_noroll+0x1f7 at
ffffffff81441407
xfs_defer_finish+0x11 at
ffffffff814417e1
xfs_itruncate_extents_flags+0x13d at
ffffffff8148b7dd
xfs_inactive_truncate+0xb9 at
ffffffff8148bb89
xfs_inactive+0x227 at
ffffffff8148c4f7
xfs_fs_destroy_inode+0xb8 at
ffffffff81496898
destroy_inode+0x3b at
ffffffff8127d2ab
do_unlinkat+0x1d1 at
ffffffff81270df1
do_syscall_64+0x40 at
ffffffff81f6b5f0
entry_SYSCALL_64_after_hwframe+0x44 at
ffffffff8200007c
This can also happen in log recovery when processing an EFI
with multiple extents through this path:
context_switch() kernel/sched/core.c:3881
__schedule() kernel/sched/core.c:5111
schedule() kernel/sched/core.c:5186
xfs_extent_busy_flush() fs/xfs/xfs_extent_busy.c:598
xfs_alloc_ag_vextent_size() fs/xfs/libxfs/xfs_alloc.c:1641
xfs_alloc_ag_vextent() fs/xfs/libxfs/xfs_alloc.c:828
xfs_alloc_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:2362
xfs_free_extent_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:3029
__xfs_free_extent() fs/xfs/libxfs/xfs_alloc.c:3067
xfs_trans_free_extent() fs/xfs/xfs_extfree_item.c:370
xfs_efi_recover() fs/xfs/xfs_extfree_item.c:626
xlog_recover_process_efi() fs/xfs/xfs_log_recover.c:4605
xlog_recover_process_intents() fs/xfs/xfs_log_recover.c:4893
xlog_recover_finish() fs/xfs/xfs_log_recover.c:5824
xfs_log_mount_finish() fs/xfs/xfs_log.c:764
xfs_mountfs() fs/xfs/xfs_mount.c:978
xfs_fs_fill_super() fs/xfs/xfs_super.c:1908
mount_bdev() fs/super.c:1417
xfs_fs_mount() fs/xfs/xfs_super.c:1985
legacy_get_tree() fs/fs_context.c:647
vfs_get_tree() fs/super.c:1547
do_new_mount() fs/namespace.c:2843
do_mount() fs/namespace.c:3163
ksys_mount() fs/namespace.c:3372
__do_sys_mount() fs/namespace.c:3386
__se_sys_mount() fs/namespace.c:3383
__x64_sys_mount() fs/namespace.c:3383
do_syscall_64() arch/x86/entry/common.c:296
entry_SYSCALL_64() arch/x86/entry/entry_64.S:180
To avoid this deadlock, we should not block in
xfs_extent_busy_flush() if we hold a busy extent in the current
transaction.
Now that the EFI processing code can handle requeuing a partially
completed EFI, we can detect this situation in
xfs_extent_busy_flush() and return -EAGAIN rather than going to
sleep forever. The -EAGAIN get propagated back out to the
xfs_trans_free_extent() context, where the EFD is populated and the
transaction is rolled, thereby moving the busy extents into the CIL.
At this point, we can retry the extent free operation again with a
clean transaction. If we hit the same "all free extents are busy"
situation when trying to fix up the free list, we can safely call
xfs_extent_busy_flush() and wait for the busy extents to resolve
and wake us. At this point, the allocation search can make progress
again and we can fix up the free list.
This deadlock was first reported by Chandan in mid-2021, but I
couldn't make myself understood during review, and didn't have time
to fix it myself.
It was reported again in March 2023, and again I have found myself
unable to explain the complexities of the solution needed during
review.
As such, I don't have hours more time to waste trying to get the
fix written the way it needs to be written, so I'm just doing it
myself. This patchset is largely based on Wengang Wang's last patch,
but with all the unnecessary stuff removed, split up into multiple
patches and cleaned up somewhat.
Reported-by: Chandan Babu R <chandanrlinux@gmail.com>
Reported-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Wed, 28 Jun 2023 18:04:33 +0000 (11:04 -0700)]
xfs: allow extent free intents to be retried
Extent freeing neeeds to be able to avoid a busy extent deadlock
when the transaction itself holds the only busy extents in the
allocation group. This may occur if we have an EFI that contains
multiple extents to be freed, and the freeing the second intent
requires the space the first extent free released to expand the
AGFL. If we block on the busy extent at this point, we deadlock.
We hold a dirty transaction that contains a entire atomic extent
free operations within it, so if we can abort the extent free
operation and commit the progress that we've made, the busy extent
can be resolved by a log force. Hence we can restart the aborted
extent free with a new transaction and continue to make
progress without risking deadlocks.
To enable this, we need the EFI processing code to be able to handle
an -EAGAIN error to tell it to commit the current transaction and
retry again. This mechanism is already built into the defer ops
processing (used bythe refcount btree modification intents), so
there's relatively little handling we need to add to the EFI code to
enable this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Dave Chinner [Wed, 28 Jun 2023 18:04:32 +0000 (11:04 -0700)]
xfs: pass alloc flags through to xfs_extent_busy_flush()
To avoid blocking in xfs_extent_busy_flush() when freeing extents
and the only busy extents are held by the current transaction, we
need to pass the XFS_ALLOC_FLAG_FREEING flag context all the way
into xfs_extent_busy_flush().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Dave Chinner [Wed, 28 Jun 2023 18:04:32 +0000 (11:04 -0700)]
xfs: use deferred frees for btree block freeing
Btrees that aren't freespace management trees use the normal extent
allocation and freeing routines for their blocks. Hence when a btree
block is freed, a direct call to xfs_free_extent() is made and the
extent is immediately freed. This puts the entire free space
management btrees under this path, so we are stacking btrees on
btrees in the call stack. The inobt, finobt and refcount btrees
all do this.
However, the bmap btree does not do this - it calls
xfs_free_extent_later() to defer the extent free operation via an
XEFI and hence it gets processed in deferred operation processing
during the commit of the primary transaction (i.e. via intent
chaining).
We need to change xfs_free_extent() to behave in a non-blocking
manner so that we can avoid deadlocks with busy extents near ENOSPC
in transactions that free multiple extents. Inserting or removing a
record from a btree can cause a multi-level tree merge operation and
that will free multiple blocks from the btree in a single
transaction. i.e. we can call xfs_free_extent() multiple times, and
hence the btree manipulation transaction is vulnerable to this busy
extent deadlock vector.
To fix this, convert all the remaining callers of xfs_free_extent()
to use xfs_free_extent_later() to queue XEFIs and hence defer
processing of the extent frees to a context that can be safely
restarted if a deadlock condition is detected.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Dave Chinner [Wed, 28 Jun 2023 18:04:31 +0000 (11:04 -0700)]
xfs: don't reverse order of items in bulk AIL insertion
XFS has strict metadata ordering requirements. One of the things it
does is maintain the commit order of items from transaction commit
through the CIL and into the AIL. That is, if a transaction logs
item A before item B in a modification, then they will be inserted
into the CIL in the order {A, B}. These items are then written into
the iclog during checkpointing in the order {A, B}. When the
checkpoint commits, they are supposed to be inserted into the AIL in
the order {A, B}, and when they are pushed from the AIL, they are
pushed in the order {A, B}.
If we crash, log recovery then replays the two items from the
checkpoint in the order {A, B}, resulting in the objects the items
apply to being queued for writeback at the end of the checkpoint
in the order {A, B}. This means recovery behaves the same way as the
runtime code.
In places, we have subtle dependencies on this ordering being
maintained. One of this place is performing intent recovery from the
log. It assumes that recovering an intent will result in a
non-intent object being the first thing that is modified in the
recovery transaction, and so when the transaction commits and the
journal flushes, the first object inserted into the AIL beyond the
intent recovery range will be a non-intent item. It uses the
transistion from intent items to non-intent items to stop the
recovery pass.
A recent log recovery issue indicated that an intent was appearing
as the first item in the AIL beyond the recovery range, hence
breaking the end of recovery detection that exists.
Tracing indicated insertion of the items into the AIL was apparently
occurring in the right order (the intent was last in the commit item
list), but the intent was appearing first in the AIL. IOWs, the
order of items in the AIL was {D,C,B,A}, not {A,B,C,D}, and bulk
insertion was reversing the order of the items in the batch of items
being inserted.
Lucky for us, all the items fed to bulk insertion have the same LSN,
so the reversal of order does not affect the log head/tail tracking
that is based on the contents of the AIL. It only impacts on code
that has implicit, subtle dependencies on object order, and AFAICT
only the intent recovery loop is impacted by it.
Make sure bulk AIL insertion does not reorder items incorrectly.
Fixes:
0e57f6a36f9b ("xfs: bulk AIL insertion during transaction commit")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Colin Ian King [Wed, 28 Jun 2023 17:59:37 +0000 (10:59 -0700)]
xfs: remove redundant initializations of pointers drop_leaf and save_leaf
Pointers drop_leaf and save_leaf are initialized with values that are never
read, they are being re-assigned later on just before they are used. Remove
the redundant early initializations and keep the later assignments at the
point where they are used. Cleans up two clang scan build warnings:
fs/xfs/libxfs/xfs_attr_leaf.c:2288:29: warning: Value stored to 'drop_leaf'
during its initialization is never read [deadcode.DeadStores]
fs/xfs/libxfs/xfs_attr_leaf.c:2289:29: warning: Value stored to 'save_leaf'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Long Li [Tue, 13 Jun 2023 15:49:20 +0000 (08:49 -0700)]
xfs: fix ag count overflow during growfs
I found a corruption during growfs:
XFS (loop0): Internal error agbno >= mp->m_sb.sb_agblocks at line 3661 of
file fs/xfs/libxfs/xfs_alloc.c. Caller __xfs_free_extent+0x28e/0x3c0
CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-
20230420-00001-gda8c95746257
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_corruption_error+0x134/0x150
__xfs_free_extent+0x2c1/0x3c0
xfs_ag_extend_space+0x291/0x3e0
xfs_growfs_data+0xd72/0xe90
xfs_file_ioctl+0x5f9/0x14a0
__x64_sys_ioctl+0x13e/0x1c0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
XFS (loop0): Corruption detected. Unmount and run xfs_repair
XFS (loop0): Internal error xfs_trans_cancel at line 1097 of file
fs/xfs/xfs_trans.c. Caller xfs_growfs_data+0x691/0xe90
CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-
20230420-00001-gda8c95746257
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_error_report+0x93/0xc0
xfs_trans_cancel+0x2c0/0x350
xfs_growfs_data+0x691/0xe90
xfs_file_ioctl+0x5f9/0x14a0
__x64_sys_ioctl+0x13e/0x1c0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f2d86706577
The bug can be reproduced with the following sequence:
# truncate -s
1073741824 xfs_test.img
# mkfs.xfs -f -b size=1024 -d agcount=4 xfs_test.img
# truncate -s
2305843009213693952 xfs_test.img
# mount -o loop xfs_test.img /mnt/test
# xfs_growfs -D
1125899907891200 /mnt/test
The root cause is that during growfs, user space passed in a large value
of newblcoks to xfs_growfs_data_private(), due to current sb_agblocks is
too small, new AG count will exceed UINT_MAX. Because of AG number type
is unsigned int and it would overflow, that caused nagcount much smaller
than the actual value. During AG extent space, delta blocks in
xfs_resizefs_init_new_ags() will much larger than the actual value due to
incorrect nagcount, even exceed UINT_MAX. This will cause corruption and
be detected in __xfs_free_extent. Fix it by growing the filesystem to up
to the maximally allowed AGs and not return EINVAL when new AG count
overflow.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Christoph Hellwig [Tue, 13 Jun 2023 01:09:23 +0000 (18:09 -0700)]
xfs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
Since commit
a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for xfs so that noop_direct_IO can eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Darrick J. Wong [Tue, 13 Jun 2023 01:09:04 +0000 (18:09 -0700)]
xfs: drop EXPERIMENTAL tag for large extent counts
This feature has been baking in upstream for ~10mo with no bug reports.
It seems to work fine here, let's get rid of the scary warnings?
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong [Tue, 13 Jun 2023 01:09:04 +0000 (18:09 -0700)]
xfs: don't deplete the reserve pool when trying to shrink the fs
Every now and then, xfs/168 fails with this logged in dmesg:
Reserve blocks depleted! Consider increasing reserve pool size.
EXPERIMENTAL online shrink feature in use. Use at your own risk!
Per-AG reservation for AG 1 failed. Filesystem may run out of space.
Per-AG reservation for AG 1 failed. Filesystem may run out of space.
Error -28 reserving per-AG metadata reserve pool.
Corruption of in-memory data (0x8) detected at xfs_ag_shrink_space+0x23c/0x3b0 [xfs] (fs/xfs/libxfs/xfs_ag.c:1007). Shutting down filesystem.
It's silly to deplete the reserved blocks pool just to shrink the
filesystem, particularly since the fs goes down after that.
Fixes:
fb2fc1720185 ("xfs: support shrinking unused space in the last AG")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Linus Torvalds [Sun, 11 Jun 2023 21:35:30 +0000 (14:35 -0700)]
Linux 6.4-rc6
Linus Torvalds [Sun, 11 Jun 2023 17:14:02 +0000 (10:14 -0700)]
Merge tag 'x86_urgent_for_v6.4_rc6' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Set up the kernel CS earlier in the boot process in case EFI boots
the kernel after bypassing the decompressor and the CS descriptor
used ends up being the EFI one which is not mapped in the identity
page table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing
* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
Linus Torvalds [Sun, 11 Jun 2023 17:07:35 +0000 (10:07 -0700)]
Merge tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five smb3 server fixes, all also for stable:
- Fix four slab out of bounds warnings: improve checks for protocol
id, and for small packet length, and for create context parsing,
and for negotiate context parsing
- Fix for incorrect dereferencing POSIX ACLs"
* tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate smb request protocol id
ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR()
ksmbd: fix out-of-bound read in parse_lease_state()
ksmbd: fix out-of-bound read in deassemble_neg_contexts()
Linus Torvalds [Sat, 10 Jun 2023 20:36:07 +0000 (13:36 -0700)]
Merge tag 'i2c-for-6.4-rc6' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Biggest news is that Andi Shyti steps in for maintaining the
controller drivers. Thank you very much!
Other than that, one new driver maintainer and the rest is usual
driver bugfixes. at24 has a Kconfig dependecy fix"
* tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
eeprom: at24: also select REGMAP
i2c: sprd: Delete i2c adapter in .remove's error path
i2c: mv64xxx: Fix reading invalid status value in atomic mode
i2c: designware: fix idx_write_cnt in read loop
i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"
MAINTAINERS: Add myself as I2C host drivers maintainer
Linus Torvalds [Sat, 10 Jun 2023 20:21:04 +0000 (13:21 -0700)]
Merge tag 'soundwire-6.4-fixes' of git://git./linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"Core fix for missing flag clear, error patch handling in qcom driver
and BIOS quirk for HP Spectre x360:
- HP Spectre x360 soundwire DMI quirk
- Error path handling for qcom driver
- Core fix for missing clear of alloc_slave_rt"
* tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Add missing clear of alloc_slave_rt
soundwire: qcom: add proper error paths in qcom_swrm_startup()
soundwire: dmi-quirks: add new mapping for HP Spectre x360
Linus Torvalds [Sat, 10 Jun 2023 20:01:09 +0000 (13:01 -0700)]
Merge tag 'arm-fixes-6.4-2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
Linus Torvalds [Fri, 9 Jun 2023 21:21:20 +0000 (14:21 -0700)]
Merge tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix an issue with the hardware queue nr_active, causing it to become
imbalanced (Tian)
- Fix an issue with null_blk not releasing pages if configured as
memory backed (Nitesh)
- Fix a locking issue in dasd (Jan)
* tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux:
s390/dasd: Use correct lock while counting channel queue length
null_blk: Fix: memory release when memory_backed=1
blk-mq: fix blk_mq_hw_ctx active request accounting
Linus Torvalds [Fri, 9 Jun 2023 18:04:08 +0000 (11:04 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio bug fixes from Michael Tsirkin:
"A bunch of fixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: use canonical ftrace path
vhost_vdpa: support PACKED when setting-getting vring_base
vhost: support PACKED when setting-getting vring_base
vhost: Fix worker hangs due to missed wake up calls
vhost: Fix crash during early vhost_transport_send_pkt calls
vhost_net: revert upend_idx only on retriable error
vhost_vdpa: tell vqs about the negotiated
vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
tools/virtio: Add .gitignore for ringtest
tools/virtio: Fix arm64 ringtest compilation error
vduse: avoid empty string for dev name
vhost: use kzalloc() instead of kmalloc() followed by memset()
Linus Torvalds [Fri, 9 Jun 2023 17:53:58 +0000 (10:53 -0700)]
Merge tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential data corruption in differential backup and
snapshot-based mirroring scenarios in RBD and a reference counting
fixup to avoid use-after-free in CephFS, all marked for stable"
* tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client:
ceph: fix use-after-free bug for inodes when flushing capsnaps
rbd: get snapshot context after exclusive lock is ensured to be held
rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
Jan Höppner [Fri, 9 Jun 2023 15:37:50 +0000 (17:37 +0200)]
s390/dasd: Use correct lock while counting channel queue length
The lock around counting the channel queue length in the BIODASDINFO
ioctl was incorrectly changed to the dasd_block->queue_lock with commit
583d6535cb9d ("dasd: remove dead code"). This can lead to endless list
iterations and a subsequent crash.
The queue_lock is supposed to be used only for queue lists belonging to
dasd_block. For dasd_device related queue lists the ccwdev lock must be
used.
Fix the mentioned issues by correctly using the ccwdev lock instead of
the queue lock.
Fixes:
583d6535cb9d ("dasd: remove dead code")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 9 Jun 2023 16:36:17 +0000 (09:36 -0700)]
Merge tag 'riscv-for-linus-6.4-rc6' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid ISA-disallowed privilege mappings that can result from
WRITE+EXEC mmap requests from userspace.
- A fix for kfence to handle the huge pages.
- A fix to avoid converting misaligned VAs to huge pages.
- ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE has been selected so kprobe
can understand user pointers.
* tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix kprobe __user string arg print fault issue
riscv: Check the virtual alignment before choosing a map size
riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD
riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable
Linus Torvalds [Fri, 9 Jun 2023 16:29:51 +0000 (09:29 -0700)]
Merge tag 's390-6.4-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Avoid linker error for randomly generated config file that has
CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86
and also to commit
4bf3ec384edf ("s390: disable branch profiling for
vdso").
- Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
* tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/purgatory: disable branch profiling
s390/cio: unregister device when the only path is gone
Linus Torvalds [Fri, 9 Jun 2023 16:17:25 +0000 (09:17 -0700)]
Merge tag 'gpio-fixes-for-v6.4-rc6' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO testing module and one commit making Andy a
reviewer for the GPIO subsystem:
- fix a memory corruption bug in gpio-sim
- fix inconsistencies in user-space configuration of gpio-sim
- make Andy Shevchenko a reviewer for the GPIO subsystem"
* tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem
gpio: sim: quietly ignore configured lines outside the bank
gpio: sim: fix memory corruption when adding named lines and unnamed hogs
Ross Zwisler [Wed, 15 Feb 2023 22:33:49 +0000 (15:33 -0700)]
tools/virtio: use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few spots in tools/virtio still refer to this older debugfs
path, so let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Message-Id: <
20230215223350.2658616-6-zwisler@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Shannon Nelson [Mon, 24 Apr 2023 22:50:31 +0000 (15:50 -0700)]
vhost_vdpa: support PACKED when setting-getting vring_base
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes:
4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <
20230424225031.18947-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Shannon Nelson [Mon, 24 Apr 2023 22:50:30 +0000 (15:50 -0700)]
vhost: support PACKED when setting-getting vring_base
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes:
4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <
20230424225031.18947-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Linus Torvalds [Fri, 9 Jun 2023 16:02:56 +0000 (09:02 -0700)]
Merge tag 'pinctrl-v6.4-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for the Meson driver, nothing else has surfaced so far
this cycle"
* tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson-axg: add missing GPIOA_18 gpio group
Linus Torvalds [Fri, 9 Jun 2023 15:38:22 +0000 (08:38 -0700)]
Merge tag 'sound-6.4-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes, and almost all are device-specific.
A few of them are the fixes for the old regressions by the fast kctl
lookups (introduced around 5.19). Others are ASoC simple-card fixes,
selftest compile warning fixes, ASoC AMD quirks, various ASoC codec
fixes as well as usual HD-audio quirks"
* tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform
ALSA: hda: Fix kctl->id initialization
ALSA: gus: Fix kctl->id initialization
ALSA: cmipci: Fix kctl->id initialization
ALSA: ymfpci: Fix kctl->id initialization
ALSA: ice1712,ice1724: fix the kcontrol->id initialization
ALSA: hda/realtek: Add quirk for Clevo NS50AU
ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41
ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256
ALSA: hda/realtek: Add Lenovo P3 Tower platform
ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01
selftests: alsa: pcm-test: Fix compiler warnings about the format
ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted
ASoC: simple-card-utils: fix PCM constraint error check
ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream()
ASoC: max98363: limit the number of channel to 1
ASoC: max98363: Removed 32bit support
ASoC: mediatek: mt8195: fix use-after-free in driver remove path
ASoC: mediatek: mt8188: fix use-after-free in driver remove path
ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x
...
Linus Torvalds [Fri, 9 Jun 2023 15:23:01 +0000 (08:23 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix an ext4 regression which breaks remounting r/w file systems that
have the quota feature enabled"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: only check dquot_initialize_needed() when debugging
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
Wolfram Sang [Fri, 9 Jun 2023 15:14:33 +0000 (17:14 +0200)]
Merge tag 'at24-fixes-for-v6.4-rc6' of git://git./linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v6.4-rc6
- fix a Kconfig issue (we need to select REGMAP, not only REGMAP_I2C)
Arnd Bergmann [Fri, 9 Jun 2023 12:15:18 +0000 (14:15 +0200)]
Merge tag 'imx-fixes-6.4-2' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.4, round 2:
- Fix SPI CS pinmux for the final production version of imx8mn-beacon
board.
- Fix GPIOs for USDHC2 CD and WP signals on imx8qm-mek board.
- Assign default clock rate for i.MX8 LPUARTs to fix UART failure.
* tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
Link: https://lore.kernel.org/r/20230607141312.GU4199@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Fri, 9 Jun 2023 02:14:10 +0000 (19:14 -0700)]
Merge tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit busier and a bit more scattered than usual. amdgpu is the main
one, with ivpu and msm having a few fixes, then i915, exynos, ast,
lima, radeon with some misc bits, but overall nothing standing out.
fb-helper:
- Fill in fb-helper vars more correctly
amdgpu:
- S0ix fixes
- GPU reset fixes
- SMU13 fixes
- SMU11 fixes
- Misc Display fixes
- Revert RV/RV2/PCO clock counter changes
- Fix Stoney xclk value
- Fix reserved vram debug info
radeon:
- Fix a potential use after free
i915:
- CDCLK voltage fix for ADL-P
- eDP wake sync pulse fix
- Two error handling fixes to selftests
exynos:
- Fix wrong return in Exynos vidi driver
- Fix use-after-free issue to Exynos g2d driver
ast:
- resume and modeset fixes for ast
ivpu:
- Assorted ivpu fixes
lima:
- lima context destroy fix
msm:
- Fix max segment size to address splat on newer a6xx
- Disable PSR by default w/ modparam to re-enable, since there still
seems to be a lingering issue
- Fix HPD issue
- Fix issue with unitialized GMU mutex"
* tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm: (32 commits)
drm/msm/a6xx: initialize GMU mutex earlier
drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
accel/ivpu: Fix sporadic VPU boot failure
accel/ivpu: Do not use mutex_lock_interruptible
accel/ivpu: Do not trigger extra VPU reset if the VPU is idle
drm/amd/display: Reduce sdp bw after urgent to 90%
drm/amdgpu: change reserved vram info print
drm/amdgpu: fix xclk freq on CHIP_STONEY
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"
Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"
Revert "drm/amdgpu: change the reference clock for raven/raven2"
drm/amd/display: add ODM case when looking for first split pipe
drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path
drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs
drm/amd/pm: Fix power context allocation in SMU13
drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram
drm/amd: Disallow s0ix without BIOS support again
drm/i915/selftests: Add some missing error propagation
drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl
...
Linus Torvalds [Fri, 9 Jun 2023 01:52:54 +0000 (18:52 -0700)]
Merge tag 'cgroup-for-6.4-rc5-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix css_set reference leaks on fork failures
- Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by
cgroup1 cpuset
- Doc update
* tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Documentation: Clarify usage of memory limits
cgroup: always put cset in cgroup_css_set_put_fork
cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
Dave Airlie [Fri, 9 Jun 2023 01:20:22 +0000 (11:20 +1000)]
Merge tag 'drm-msm-fixes-2023-06-08' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few more late fixes for v6.4-rc6
+ Fix max segment size to address splat on newer a6xx
+ Disable PSR by default w/ modparam to re-enable, since there
still seems to be a lingering issue
+ Fix HPD issue
+ Fix issue with unitialized GMU mutex
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGufjVZRNT6YfQ7YUXFC7Cz95wdLF7QHAYkiGfp+3Xc3DQ@mail.gmail.com
Dmitry Baryshkov [Mon, 10 Apr 2023 16:59:08 +0000 (19:59 +0300)]
drm/msm/a6xx: initialize GMU mutex earlier
Move GMU mutex initialization earlier to make sure that it is always
initialized. a6xx_destroy can be called from ther failure path before
GMU initialization.
This fixes the following backtrace:
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 58 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x3d0
Modules linked in:
CPU: 0 PID: 58 Comm: kworker/u16:1 Not tainted 6.3.0-rc5-00155-g187c06436519 #565
Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate:
60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x1ec/0x3d0
lr : __mutex_lock+0x1ec/0x3d0
sp :
ffff800008993620
x29:
ffff800008993620 x28:
0000000000000002 x27:
ffff47b253c52800
x26:
0000000001000606 x25:
ffff47b240bb2810 x24:
fffffffffffffff4
x23:
0000000000000000 x22:
ffffc38bba15ac14 x21:
0000000000000002
x20:
ffff800008993690 x19:
ffff47b2430cc668 x18:
fffffffffffe98f0
x17:
6f74616c75676572 x16:
20796d6d75642067 x15:
0000000000000038
x14:
0000000000000000 x13:
ffffc38bbba050b8 x12:
0000000000000666
x11:
0000000000000222 x10:
ffffc38bbba603e8 x9 :
ffffc38bbba050b8
x8 :
00000000ffffefff x7 :
ffffc38bbba5d0b8 x6 :
0000000000000222
x5 :
000000000000bff4 x4 :
40000000fffff222 x3 :
0000000000000000
x2 :
0000000000000000 x1 :
0000000000000000 x0 :
ffff47b240cb1880
Call trace:
__mutex_lock+0x1ec/0x3d0
mutex_lock_nested+0x2c/0x38
a6xx_destroy+0xa0/0x138
a6xx_gpu_init+0x41c/0x618
adreno_bind+0x188/0x290
component_bind_all+0x118/0x248
msm_drm_bind+0x1c0/0x670
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x16c
component_add+0x14/0x20
dsi_dev_attach+0x20/0x2c
dsi_host_attach+0x9c/0x144
devm_mipi_dsi_attach+0x34/0xac
lt9611uxc_attach_dsi.isra.0+0x84/0xfc
lt9611uxc_probe+0x5b8/0x67c
i2c_device_probe+0x1ac/0x358
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x2bc/0x594
worker_thread+0x228/0x438
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
irq event stamp: 299345
hardirqs last enabled at (299345): [<
ffffc38bb9ba61e4>] put_cpu_partial+0x1c8/0x22c
hardirqs last disabled at (299344): [<
ffffc38bb9ba61dc>] put_cpu_partial+0x1c0/0x22c
softirqs last enabled at (296752): [<
ffffc38bb9890434>] _stext+0x434/0x4e8
softirqs last disabled at (296741): [<
ffffc38bb989669c>] ____do_softirq+0x10/0x1c
---[ end trace
0000000000000000 ]---
Fixes:
4cd15a3e8b36 ("drm/msm/a6xx: Make GPU destroy a bit safer")
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/531540/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Kuogee Hsieh [Tue, 23 May 2023 21:52:36 +0000 (14:52 -0700)]
drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.
Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text
Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();
Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()
Changes in V6:
-- squash remove enable_irq() and disable_irq()
Fixes:
cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Dave Airlie [Fri, 9 Jun 2023 01:10:09 +0000 (11:10 +1000)]
Merge tag 'drm-misc-fixes-2023-06-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc6:
- resume and modeset fixes for ast.
- Fill in fb-helper vars more correctly.
- Assorted ivpu fixes.
- lima context destroy fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea6b88ec-b653-3781-0b68-cd0275c27923@linux.intel.com
Dave Airlie [Fri, 9 Jun 2023 01:02:04 +0000 (11:02 +1000)]
Merge tag 'exynos-drm-fixes-for-v6.4-rc6' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- Fix wrong return in Exynos vidi driver.
- Fix use-after-free issue to Exynos g2d driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607043148.43303-1-inki.dae@samsung.com
Dave Airlie [Fri, 9 Jun 2023 00:57:26 +0000 (10:57 +1000)]
Merge tag 'drm-intel-fixes-2023-06-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
CDCLK voltage fix for ADL-P and eDP wake sync pulse fix.
Two error handling fixes to selftests (to appease static checkers)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZIGUHBz7+LsqN2nm@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Thu, 8 Jun 2023 23:19:56 +0000 (09:19 +1000)]
Merge tag 'amd-drm-fixes-6.4-2023-06-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.4-2023-06-07:
amdgpu:
- S0ix fixes
- GPU reset fixes
- SMU13 fixes
- SMU11 fixes
- Misc Display fixes
- Revert RV/RV2/PCO clock counter changes
- Fix Stoney xclk value
- Fix reserved vram debug info
radeon:
- Fix a potential use after free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607213740.7723-1-alexander.deucher@amd.com
Linus Torvalds [Thu, 8 Jun 2023 20:54:26 +0000 (13:54 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two tiny arm64 fixes for -rc6.
One fixes a build breakage when MAX_ORDER can be nonsensical if
CONFIG_EXPERT=y and the other fixes the address masking for perf's
page fault software events so that it is consistent amongst them:
- Fix build breakage due to bogus MAX_ORDER definitions on !4k pages
- Avoid masking fault address for perf software events"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: pass original fault address to handle_mm_fault() in PER_VMA_LOCK block
arm64: Remove the ARCH_FORCE_MAX_ORDER config input prompt
Mike Christie [Wed, 7 Jun 2023 19:23:38 +0000 (14:23 -0500)]
vhost: Fix worker hangs due to missed wake up calls
We can race where we have added work to the work_list, but
vhost_task_fn has passed that check but not yet set us into
TASK_INTERRUPTIBLE. wake_up_process will see us in TASK_RUNNING and
just return.
This bug was intoduced in commit
f9010dbdce91 ("fork, vhost: Use
CLONE_THREAD to fix freezer/ps regression") when I moved the setting
of TASK_INTERRUPTIBLE to simplfy the code and avoid get_signal from
logging warnings about being in the wrong state. This moves the setting
of TASK_INTERRUPTIBLE back to before we test if we need to stop the
task to avoid a possible race there as well. We then have vhost_worker
set TASK_RUNNING if it finds work similar to before.
Fixes:
f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <
20230607192338.6041-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mike Christie [Wed, 7 Jun 2023 19:23:37 +0000 (14:23 -0500)]
vhost: Fix crash during early vhost_transport_send_pkt calls
If userspace does VHOST_VSOCK_SET_GUEST_CID before VHOST_SET_OWNER we
can race where:
1. thread0 calls vhost_transport_send_pkt -> vhost_work_queue
2. thread1 does VHOST_SET_OWNER which calls vhost_worker_create.
3. vhost_worker_create will set the dev->worker pointer before setting
the worker->vtsk pointer.
4. thread0's vhost_work_queue will see the dev->worker pointer is
set and try to call vhost_task_wake using not yet set worker->vtsk
pointer.
5. We then crash since vtsk is NULL.
Before commit
6e890c5d5021 ("vhost: use vhost_tasks for worker
threads"), we only had the worker pointer so we could just check it to
see if VHOST_SET_OWNER has been done. After that commit we have the
vhost_worker and vhost_task pointer, so we can now hit the bug above.
This patch embeds the vhost_worker in the vhost_dev and moves the work
list initialization back to vhost_dev_init, so we can just check the
worker.vtsk pointer to check if VHOST_SET_OWNER has been done like
before.
Fixes:
6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <
20230607192338.6041-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: syzbot+d0d442c22fa8db45ff0e@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Andrey Smetanin [Mon, 24 Apr 2023 20:44:11 +0000 (23:44 +0300)]
vhost_net: revert upend_idx only on retriable error
Fix possible virtqueue used buffers leak and corresponding stuck
in case of temporary -EIO from sendmsg() which is produced by
tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx
to pass packet data (that is update used_idx in corresponding
vhost_zerocopy_signal_used()) as if packet data has been
transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN
in case of fake successful transmit.
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Message-Id: <
20230424204411.24888-1-asmetanin@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Jason Wang <jasowang@redhat.com>
Shannon Nelson [Mon, 24 Apr 2023 22:50:29 +0000 (15:50 -0700)]
vhost_vdpa: tell vqs about the negotiated
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <
20230424225031.18947-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dragos Tatulea [Tue, 16 May 2023 09:58:01 +0000 (12:58 +0300)]
vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
Currently the vdpa device is unregistered after the workqueue that
processes vq commands is disabled. However, the device unregister
process can still send commands to the cvq (a vlan delete for example)
which leads to a hang because the handing workqueue has been disabled
and the command never finishes:
[ 2263.095764] rcu: INFO: rcu_sched self-detected stall on CPU
[ 2263.096307] rcu: 9-....: (5250 ticks this GP) idle=dac4/1/0x4000000000000000 softirq=111009/111009 fqs=2544
[ 2263.097154] rcu: (t=5251 jiffies g=393549 q=347 ncpus=10)
[ 2263.097648] CPU: 9 PID: 94300 Comm: kworker/u20:2 Not tainted 6.3.0-rc6_for_upstream_min_debug_2023_04_14_00_02 #1
[ 2263.098535] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2263.099481] Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core]
[ 2263.100143] RIP: 0010:virtnet_send_command+0x109/0x170
[ 2263.100621] Code: 1d df f5 ff 85 c0 78 5c 48 8b 7b 08 e8 d0 c5 f5 ff 84 c0 75 11 eb 22 48 8b 7b 08 e8 01 b7 f5 ff 84 c0 75 15 f3 90 48 8b 7b 08 <48> 8d 74 24 04 e8 8d c5 f5 ff 48 85 c0 74 de 48 8b 83 f8 00 00 00
[ 2263.102148] RSP: 0018:
ffff888139cf36e8 EFLAGS:
00000246
[ 2263.102624] RAX:
0000000000000000 RBX:
ffff888166bea940 RCX:
0000000000000001
[ 2263.103244] RDX:
0000000000000000 RSI:
ffff888139cf36ec RDI:
ffff888146763800
[ 2263.103864] RBP:
ffff888139cf3710 R08:
ffff88810d201000 R09:
0000000000000000
[ 2263.104473] R10:
0000000000000002 R11:
0000000000000003 R12:
0000000000000002
[ 2263.105082] R13:
0000000000000002 R14:
ffff888114528400 R15:
ffff888166bea000
[ 2263.105689] FS:
0000000000000000(0000) GS:
ffff88852cc80000(0000) knlGS:
0000000000000000
[ 2263.106404] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2263.106925] CR2:
00007f31f394b000 CR3:
000000010615b006 CR4:
0000000000370ea0
[ 2263.107542] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 2263.108163] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 2263.108769] Call Trace:
[ 2263.109059] <TASK>
[ 2263.109320] ? check_preempt_wakeup+0x11f/0x230
[ 2263.109750] virtnet_vlan_rx_kill_vid+0x5a/0xa0
[ 2263.110180] vlan_vid_del+0x9c/0x170
[ 2263.110546] vlan_device_event+0x351/0x760 [8021q]
[ 2263.111004] raw_notifier_call_chain+0x41/0x60
[ 2263.111426] dev_close_many+0xcb/0x120
[ 2263.111808] unregister_netdevice_many_notify+0x130/0x770
[ 2263.112297] ? wq_worker_running+0xa/0x30
[ 2263.112688] unregister_netdevice_queue+0x89/0xc0
[ 2263.113128] unregister_netdev+0x18/0x20
[ 2263.113512] virtnet_remove+0x4f/0x230
[ 2263.113885] virtio_dev_remove+0x31/0x70
[ 2263.114273] device_release_driver_internal+0x18f/0x1f0
[ 2263.114746] bus_remove_device+0xc6/0x130
[ 2263.115146] device_del+0x173/0x3c0
[ 2263.115502] ? kernfs_find_ns+0x35/0xd0
[ 2263.115895] device_unregister+0x1a/0x60
[ 2263.116279] unregister_virtio_device+0x11/0x20
[ 2263.116706] device_release_driver_internal+0x18f/0x1f0
[ 2263.117182] bus_remove_device+0xc6/0x130
[ 2263.117576] device_del+0x173/0x3c0
[ 2263.117929] ? vdpa_dev_remove+0x20/0x20 [vdpa]
[ 2263.118364] device_unregister+0x1a/0x60
[ 2263.118752] mlx5_vdpa_dev_del+0x4c/0x80 [mlx5_vdpa]
[ 2263.119232] vdpa_match_remove+0x21/0x30 [vdpa]
[ 2263.119663] bus_for_each_dev+0x71/0xc0
[ 2263.120054] vdpa_mgmtdev_unregister+0x57/0x70 [vdpa]
[ 2263.120520] mlx5v_remove+0x12/0x20 [mlx5_vdpa]
[ 2263.120953] auxiliary_bus_remove+0x18/0x30
[ 2263.121356] device_release_driver_internal+0x18f/0x1f0
[ 2263.121830] bus_remove_device+0xc6/0x130
[ 2263.122223] device_del+0x173/0x3c0
[ 2263.122581] ? devl_param_driverinit_value_get+0x29/0x90
[ 2263.123070] mlx5_rescan_drivers_locked+0xc4/0x2d0 [mlx5_core]
[ 2263.123633] mlx5_unregister_device+0x54/0x80 [mlx5_core]
[ 2263.124169] mlx5_uninit_one+0x54/0x150 [mlx5_core]
[ 2263.124656] mlx5_sf_dev_remove+0x45/0x90 [mlx5_core]
[ 2263.125153] auxiliary_bus_remove+0x18/0x30
[ 2263.125560] device_release_driver_internal+0x18f/0x1f0
[ 2263.126052] bus_remove_device+0xc6/0x130
[ 2263.126451] device_del+0x173/0x3c0
[ 2263.126815] mlx5_sf_dev_remove+0x39/0xf0 [mlx5_core]
[ 2263.127318] mlx5_sf_dev_state_change_handler+0x178/0x270 [mlx5_core]
[ 2263.127920] blocking_notifier_call_chain+0x5a/0x80
[ 2263.128379] mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core]
[ 2263.128951] process_one_work+0x1bb/0x3c0
[ 2263.129355] ? process_one_work+0x3c0/0x3c0
[ 2263.129766] worker_thread+0x4d/0x3c0
[ 2263.130140] ? process_one_work+0x3c0/0x3c0
[ 2263.130548] kthread+0xb9/0xe0
[ 2263.130895] ? kthread_complete_and_exit+0x20/0x20
[ 2263.131349] ret_from_fork+0x1f/0x30
[ 2263.131717] </TASK>
The fix is to disable and destroy the workqueue after the device
unregister. It is expected that vhost will not trigger kicks after
the unregister. But even if it would, the wq is disabled already by
setting the pointer to NULL (done so in the referenced commit).
Fixes:
ad6dc1daaf29 ("vdpa/mlx5: Avoid processing works if workqueue was destroyed")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <
20230516095800.3549932-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Rong Tao [Thu, 25 May 2023 08:37:28 +0000 (16:37 +0800)]
tools/virtio: Add .gitignore for ringtest
Ignore executables for ringtest.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_C121802C93CB4095C6D7D95113442E830A07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rong Tao [Wed, 24 May 2023 12:31:24 +0000 (20:31 +0800)]
tools/virtio: Fix arm64 ringtest compilation error
Add cpu_relax() for arm64 instead of directly assert(), and add assert.h
header file. Also, add smp_wmb and smp_mb for arm64.
Compilation error as follows, avoid __always_inline undefined.
$ make
cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c
In file included from ring.c:10:
main.h: In function ‘busy_wait’:
main.h:99:21: warning: implicit declaration of function ‘assert’
[-Wimplicit-function-declaration]
99 | #define cpu_relax() assert(0)
| ^~~~~~
main.h:107:17: note: in expansion of macro ‘cpu_relax’
107 | cpu_relax();
| ^~~~~~~~~
main.h:12:1: note: ‘assert’ is defined in header ‘<assert.h>’; did you
forget to ‘#include <assert.h>’?
11 | #include <stdbool.h>
+++ |+#include <assert.h>
12 |
main.h: At top level:
main.h:143:23: error: expected ‘;’ before ‘void’
143 | static __always_inline
| ^
| ;
144 | void __read_once_size(const volatile void *p, void *res, int
size)
| ~~~~
main.h:158:23: error: expected ‘;’ before ‘void’
158 | static __always_inline void __write_once_size(volatile void *p,
void *res, int size)
| ^~~~~
| ;
make: *** [<builtin>: ring.o] Error 1
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sheng Zhao [Tue, 30 May 2023 03:36:26 +0000 (11:36 +0800)]
vduse: avoid empty string for dev name
Syzkaller hits a kernel WARN when the first character of the dev name
provided is NULL. Solution is to add a NULL check before calling
cdev_device_add() in vduse_create_dev().
kobject: (
0000000072042169): attempted to be registered with empty name!
WARNING: CPU: 0 PID: 112695 at lib/kobject.c:236
Call Trace:
kobject_add_varg linux/src/lib/kobject.c:390 [inline]
kobject_add+0xf6/0x150 linux/src/lib/kobject.c:442
device_add+0x28f/0xc20 linux/src/drivers/base/core.c:2167
cdev_device_add+0x83/0xc0 linux/src/fs/char_dev.c:546
vduse_create_dev linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2254 [inline]
vduse_ioctl+0x7b5/0xf30 linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2316
vfs_ioctl linux/src/fs/ioctl.c:47 [inline]
file_ioctl linux/src/fs/ioctl.c:510 [inline]
do_vfs_ioctl+0x14b/0xa80 linux/src/fs/ioctl.c:697
ksys_ioctl+0x7c/0xa0 linux/src/fs/ioctl.c:714
__do_sys_ioctl linux/src/fs/ioctl.c:721 [inline]
__se_sys_ioctl linux/src/fs/ioctl.c:719 [inline]
__x64_sys_ioctl+0x42/0x50 linux/src/fs/ioctl.c:719
do_syscall_64+0x94/0x330 linux/src/arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Cc: "Xie Yongji" <xieyongji@bytedance.com>
Reported-by: Xianjun Zeng <zengxianjun@bytedance.com>
Signed-off-by: Sheng Zhao <sheng.zhao@bytedance.com>
Message-Id: <
20230530033626.1266794-1-sheng.zhao@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Cc: "Michael S. Tsirkin"<mst@redhat.com>, "Jason Wang"<jasowang@redhat.com>,
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Biju Das [Wed, 7 Jun 2023 17:07:29 +0000 (18:07 +0100)]
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
Add the MAINTAINERS entries for the Renesas RZ/V2M I2C driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Ruan Jinjie [Thu, 4 May 2023 07:29:10 +0000 (15:29 +0800)]
riscv: fix kprobe __user string arg print fault issue
On riscv qemu platform, when add kprobe event on do_sys_open() to show
filename string arg, it just print fault as follow:
echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3
mode=$arg4' > kprobe_events
bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0
As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE,
the +0($arg2) addr is processed as a kernel address though it is a
userspace address, cause the above filename=(fault) print. So select
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the
kprobe trace is ok as below:
bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/"
flags=0x98800 mode=0x0
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Fixes:
0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Linus Torvalds [Thu, 8 Jun 2023 16:27:19 +0000 (09:27 -0700)]
Merge tag 'net-6.4-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, wifi, netfilter, bluetooth and ebpf.
Current release - regressions:
- bpf: sockmap: avoid potential NULL dereference in
sk_psock_verdict_data_ready()
- wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
- phylink: actually fix ksettings_set() ethtool call
- eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3
Current release - new code bugs:
- wifi: mt76: fix possible NULL pointer dereference in
mt7996_mac_write_txwi()
Previous releases - regressions:
- netfilter: fix NULL pointer dereference in nf_confirm_cthelper
- wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
- openvswitch: fix upcall counter access before allocation
- bluetooth:
- fix use-after-free in hci_remove_ltk/hci_remove_irk
- fix l2cap_disconnect_req deadlock
- nic: bnxt_en: prevent kernel panic when receiving unexpected
PHC_UPDATE event
Previous releases - always broken:
- core: annotate rfs lockless accesses
- sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values
- netfilter: add null check for nla_nest_start_noflag() in
nft_dump_basechain_hook()
- bpf: fix UAF in task local storage
- ipv4: ping_group_range: allow GID from
2147483648 to
4294967294
- ipv6: rpl: fix route of death.
- tcp: gso: really support BIG TCP
- mptcp: fixes for user-space PM address advertisement
- smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT
- can: avoid possible use-after-free when j1939_can_rx_register fails
- batman-adv: fix UaF while rescheduling delayed work
- eth: qede: fix scheduling while atomic
- eth: ice: make writes to /dev/gnssX synchronous"
* tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
bnxt_en: Skip firmware fatal error recovery if chip is not accessible
bnxt_en: Query default VLAN before VNIC setup on a VF
bnxt_en: Don't issue AP reset during ethtool's reset operation
bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
net: bcmgenet: Fix EEE implementation
eth: ixgbe: fix the wake condition
eth: bnxt: fix the wake condition
lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
bpf: Add extra path pointer check to d_path helper
net: sched: fix possible refcount leak in tc_chain_tmplt_add()
net: sched: act_police: fix sparse errors in tcf_police_dump()
net: openvswitch: fix upcall counter access before allocation
net: sched: move rtm_tca_policy declaration to include file
ice: make writes to /dev/gnssX synchronous
net: sched: add rcu annotations around qdisc->qdisc_sleeping
rfs: annotate lockless accesses to RFS sock flow table
rfs: annotate lockless accesses to sk->sk_rxhash
virtio_net: use control_buf for coalesce params
...
Linus Torvalds [Thu, 8 Jun 2023 15:46:58 +0000 (08:46 -0700)]
Merge tag 'xfs-6.4-rc5-fixes' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Dave Chinner:
"These are a set of regression fixes discovered on recent kernels. I
was hoping to send this to you a week and half ago, but events out of
my control delayed finalising the changes until early this week.
Whilst the diffstat looks large for this stage of the merge window, a
large chunk of it comes from moving the guts of one function from one
file to another i.e. it's the same code, it is just run in a different
context where it is safe to hold a specific lock. Otherwise the
individual changes are relatively small and straigtht forward.
Summary:
- Propagate unlinked inode list corruption back up to log recovery
(regression fix)
- improve corruption detection for AGFL entries, AGFL indexes and
XEFI extents (syzkaller fuzzer oops report)
- Avoid double perag reference release (regression fix)
- Improve extent merging detection in scrub (regression fix)
- Fix a new undefined high bit shift (regression fix)
- Fix for AGF vs inode cluster buffer deadlock (regression fix)"
* tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: collect errors from inodegc for unlinked inode recovery
xfs: validate block number being freed before adding to xefi
xfs: validity check agbnos on the AGFL
xfs: fix agf/agfl verification on v4 filesystems
xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag()
xfs: fix broken logic when detecting mergeable bmap records
xfs: Fix undefined behavior of shift into sign bit
xfs: fix AGF vs inode cluster buffer deadlock
xfs: defered work could create precommits
xfs: restore allocation trylock iteration
xfs: buffer pins need to hold a buffer reference
Theodore Ts'o [Thu, 8 Jun 2023 14:06:40 +0000 (10:06 -0400)]
ext4: only check dquot_initialize_needed() when debugging
ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode. To assure that this has happened there are WARN_ON
checks. Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is
enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Theodore Ts'o [Thu, 8 Jun 2023 13:57:04 +0000 (09:57 -0400)]
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
This reverts commit
a44be64bbecb15a452496f60db6eacfee2b59c79.
Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Charles Keepax [Fri, 2 Jun 2023 10:11:36 +0000 (11:11 +0100)]
soundwire: stream: Add missing clear of alloc_slave_rt
The current path that skips allocating the slave runtime does not clear
the alloc_slave_rt flag, this is clearly incorrect. Add the missing
clear, so the runtime won't be erroneously cleaned up.
Fixes:
f3016b891c8c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Paolo Abeni [Thu, 8 Jun 2023 08:52:48 +0000 (10:52 +0200)]
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes
This patchset has the following fixes for bnxt_en:
1. Add missing VNIC ID parameter in the FW message when getting an
updated RSS configuration from the FW.
2. Fix a warning when doing ethtool reset on newer chips.
3. Fix VLAN issue on a VF when a default VLAN is assigned.
4. Fix a problem during DPC (Downstream Port containment) scenario.
5. Fix a NULL pointer dereference when receiving a PTP event from FW.
6. Fix VXLAN/Geneve UDP port delete/add with newer FW.
====================
Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Somnath Kotur [Wed, 7 Jun 2023 07:54:09 +0000 (00:54 -0700)]
bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
As per the new udp tunnel framework, drivers which need to know the
details of a port entry (i.e. port type) when it gets deleted should
use the .set_port / .unset_port callbacks.
Implementing the current .udp_tunnel_sync callback would mean that the
deleted tunnel port entry would be all zeros. This used to work on
older firmware because it would not check the input when deleting a
tunnel port. With newer firmware, the delete will now fail and
subsequent tunnel port allocation will fail as a result.
Fixes:
442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pavan Chebbi [Wed, 7 Jun 2023 07:54:08 +0000 (00:54 -0700)]
bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
The firmware can send PHC_RTC_UPDATE async event on a PF that may not
have PTP registered. In such a case, there will be a null pointer
deference for bp->ptp_cfg when we try to handle the event.
Fix it by not registering for this event with the firmware if !bp->ptp_cfg.
Also, check that bp->ptp_cfg is valid before proceeding when we receive
the event.
Fixes:
8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vikas Gupta [Wed, 7 Jun 2023 07:54:07 +0000 (00:54 -0700)]
bnxt_en: Skip firmware fatal error recovery if chip is not accessible
Driver starts firmware fatal error recovery by detecting
heartbeat failure or fw reset count register changing. But
these checks are not reliable if the device is not accessible.
This can happen while DPC (Downstream Port containment) is in
progress. Skip firmware fatal recovery if pci_device_is_present()
returns false.
Fixes:
acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Somnath Kotur [Wed, 7 Jun 2023 07:54:06 +0000 (00:54 -0700)]
bnxt_en: Query default VLAN before VNIC setup on a VF
We need to call bnxt_hwrm_func_qcfg() on a VF to query the default
VLAN that may be setup by the PF. If a default VLAN is enabled,
the VF cannot support VLAN acceleration on the receive side and
the VNIC must be setup to strip out the default VLAN tag. If a
default VLAN is not enabled, the VF can support VLAN acceleration
on the receive side. The VNIC should be set up to strip or not
strip the VLAN based on the RX VLAN acceleration setting.
Without this call to determine the default VLAN before calling
bnxt_setup_vnic(), the VNIC may not be set up correctly. For
example, bnxt_setup_vnic() may set up to strip the VLAN tag based
on stale default VLAN information. If RX VLAN acceleration is
not enabled, the VLAN tag will be incorrectly stripped and the
RX data path will not work correctly.
Fixes:
cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sreekanth Reddy [Wed, 7 Jun 2023 07:54:05 +0000 (00:54 -0700)]
bnxt_en: Don't issue AP reset during ethtool's reset operation
Only older NIC controller's firmware uses the PROC AP reset type.
Firmware on 5731X/5741X and newer chips does not support this reset
type. When bnxt_reset() issues a series of resets, this PROC AP
reset may actually fail on these newer chips because the firmware
is not ready to accept this unsupported command yet. Avoid this
unnecessary error by skipping this reset type on chips that don't
support it.
Fixes:
7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pavan Chebbi [Wed, 7 Jun 2023 07:54:04 +0000 (00:54 -0700)]
bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
We must specify the vnic id of the vnic in the input structure of this
firmware message. Otherwise we will get an error from the firmware.
Fixes:
98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Randy Dunlap [Thu, 8 Jun 2023 02:54:24 +0000 (19:54 -0700)]
eeprom: at24: also select REGMAP
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.
../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration
540 | struct regmap_config *regmap_config)
../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client':
../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c: In function 'at24_probe':
../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable]
Fixes:
5c015258478e ("eeprom: at24: add basic regmap_i2c support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Xiubo Li [Thu, 1 Jun 2023 00:59:31 +0000 (08:59 +0800)]
ceph: fix use-after-free bug for inodes when flushing capsnaps
There is a race between capsnaps flush and removing the inode from
'mdsc->snap_flush_list' list:
== Thread A == == Thread B ==
ceph_queue_cap_snap()
-> allocate 'capsnapA'
->ihold('&ci->vfs_inode')
->add 'capsnapA' to 'ci->i_cap_snaps'
->add 'ci' to 'mdsc->snap_flush_list'
...
== Thread C ==
ceph_flush_snaps()
->__ceph_flush_snaps()
->__send_flush_snap()
handle_cap_flushsnap_ack()
->iput('&ci->vfs_inode')
this also will release 'ci'
...
== Thread D ==
ceph_handle_snap()
->flush_snaps()
->iterate 'mdsc->snap_flush_list'
->get the stale 'ci'
->remove 'ci' from ->ihold(&ci->vfs_inode) this
'mdsc->snap_flush_list' will WARNING
To fix this we will increase the inode's i_count ref when adding 'ci'
to the 'mdsc->snap_flush_list' list.
[ idryomov: need_put int -> bool ]
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Andrzej Kacprowski [Wed, 7 Jun 2023 09:45:02 +0000 (11:45 +0200)]
accel/ivpu: Fix sporadic VPU boot failure
Wait for AON bit in HOST_SS_CPR_RST_CLR to return 0 before
starting VPUIP power up sequence, otherwise the VPU device
may sporadically fail to boot.
An error in power up sequence is propagated to the runtime
power management - the device will be in an error state
until the VPU driver is reloaded.
Fixes:
35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607094502.388489-1-stanislaw.gruszka@linux.intel.com
Stanislaw Gruszka [Thu, 25 May 2023 10:38:18 +0000 (12:38 +0200)]
accel/ivpu: Do not use mutex_lock_interruptible
If we get signal when waiting for the mmu->lock we do not invalidate
current MMU configuration that might result in undefined behavior.
Additionally there is little or no benefit on break waiting for
ipc->lock. In current code base, we keep this lock for short periods.
Fixes:
263b2ba5fc93 ("accel/ivpu: Add Intel VPU MMU support")
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-2-stanislaw.gruszka@linux.intel.com
Andrzej Kacprowski [Thu, 25 May 2023 10:38:17 +0000 (12:38 +0200)]
accel/ivpu: Do not trigger extra VPU reset if the VPU is idle
Turning off the PLL and entering D0i3 will reset the VPU so
an explicit IP reset is redundant.
But if the VPU is active, it may interfere with PLL disabling
and to avoid that, we have to issue an additional IP reset
to silence the VPU before turning off the PLL.
Fixes:
a8fed6d1e0b9 ("accel/ivpu: Fix power down sequence")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-1-stanislaw.gruszka@linux.intel.com
Jakub Kicinski [Thu, 8 Jun 2023 04:56:01 +0000 (21:56 -0700)]
Merge tag 'batadv-net-pullrequest-
20230607' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix a broken sync while rescheduling delayed work,
by Vladislav Efanov
* tag 'batadv-net-pullrequest-
20230607' of git://git.open-mesh.org/linux-merge:
batman-adv: Broken sync while rescheduling delayed work
====================
Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Tue, 6 Jun 2023 21:43:47 +0000 (14:43 -0700)]
net: bcmgenet: Fix EEE implementation
We had a number of short comings:
- EEE must be re-evaluated whenever the state machine detects a link
change as wight be switching from a link partner with EEE
enabled/disabled
- tx_lpi_enabled controls whether EEE should be enabled/disabled for the
transmit path, which applies to the TBUF block
- We do not need to forcibly enable EEE upon system resume, as the PHY
state machine will trigger a link event that will do that, too
Fixes:
6ef398ea60d9 ("net: bcmgenet: add EEE support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 01:08:26 +0000 (18:08 -0700)]
eth: ixgbe: fix the wake condition
Flip the netif_carrier_ok() condition in queue wake logic.
When I moved it to inside __netif_txq_completed_wake()
I missed negating it.
This made the condition ineffective and could probably
lead to crashes.
Fixes:
301f227fc860 ("net: piggy back on the memory barrier in bql when waking queues")
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 01:08:25 +0000 (18:08 -0700)]
eth: bnxt: fix the wake condition
The down condition should be the negation of the wake condition,
IOW when I moved it from:
if (cond && wake())
to
if (__netif_txq_completed_wake(cond))
Cond should have been negated. Flip it now.
This bug leads to occasional crashes with netconsole.
It may also lead to queue never waking up in case BQL is not enabled.
Reported-by: David Wei <davidhwei@meta.com>
Fixes:
08a096780d92 ("bnxt: use new queue try_stop/try_wake macros")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Jun 2023 04:47:11 +0000 (21:47 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-07
We've added 7 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 112 insertions(+), 7 deletions(-).
The main changes are:
1) Fix a use-after-free in BPF's task local storage, from KP Singh.
2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa.
3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet.
4) UAPI fix for BPF_NETFILTER before final kernel ships,
from Florian Westphal.
5) Fix map-in-map array_map_gen_lookup code generation where elem_size was
not being set for inner maps, from Rhys Rustad-Elliott.
6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add extra path pointer check to d_path helper
selftests/bpf: Fix sockopt_sk selftest
bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
selftests/bpf: Add access_inner_map selftest
bpf: Fix elem_size not being set for inner maps
bpf: Fix UAF in task local storage
bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready()
====================
Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ben Hutchings [Fri, 2 Jun 2023 18:28:15 +0000 (20:28 +0200)]
lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap.
So we need to clear the pointer to our glue structure in rmap before
doing that, not after.
Fixes:
4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alvin Lee [Fri, 19 May 2023 15:38:15 +0000 (11:38 -0400)]
drm/amd/display: Reduce sdp bw after urgent to 90%
[Description]
Reduce expected SDP bandwidth due to poor QoS and
arbitration issues on high bandwidth configs
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YiPeng Chai [Wed, 24 May 2023 09:14:15 +0000 (17:14 +0800)]
drm/amdgpu: change reserved vram info print
The link object of mgr->reserved_pages is the blocks
variable in struct amdgpu_vram_reservation, not the
link variable in struct drm_buddy_block.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Chia-I Wu [Thu, 1 Jun 2023 21:48:08 +0000 (14:48 -0700)]
drm/amdgpu: fix xclk freq on CHIP_STONEY
According to Alex, most APUs from that time seem to have the same issue
(vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I
limit the fixup to CHIP_STONEY
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Min Li [Sat, 3 Jun 2023 07:43:45 +0000 (15:43 +0800)]
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:37:13 +0000 (14:37 -0400)]
Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"
This reverts commit
f03eb1d26c2739b75580f58bbab4ab2d5d3eba46.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:34:12 +0000 (14:34 -0400)]
Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"
This reverts commit
9d2d1827af295fd6971786672c41c4dba3657154.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:32:55 +0000 (14:32 -0400)]
Revert "drm/amdgpu: change the reference clock for raven/raven2"
This reverts commit
fbc24293ca16b3b9ef891fe32ccd04735a6f8dc1.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Tue, 9 May 2023 20:40:19 +0000 (16:40 -0400)]
drm/amd/display: add ODM case when looking for first split pipe
[Why]
When going from ODM 2:1 single display case to max displays, second
odm pipe needs to be repurposed for one of the new single displays.
However, acquire_first_split_pipe() only handles MPC case and not
ODM case
[How]
Add ODM conditions in acquire_first_split_pipe()
Add commit_minimal_transition_state() in commit_streams() to handle
odm 2:1 exit first, and then process new streams
Handle ODM condition in commit_minimal_transition_state()
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 30 May 2023 17:44:30 +0000 (12:44 -0500)]
drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path
Users have reported that s2idle wasn't working on OEM Phoenix systems,
but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in
the distribution kernel config.
To make this more apparent, raise the messaging to err instead of warn.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 6 Apr 2023 04:08:21 +0000 (12:08 +0800)]
drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs
Disable the pcie lane switching for some sienna_cichlid SKUs since it
might not work well on some platforms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Lijo Lazar [Fri, 31 Mar 2023 11:00:01 +0000 (16:30 +0530)]
drm/amd/pm: Fix power context allocation in SMU13
Use the right data structure for allocation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Horatio Zhang [Mon, 29 May 2023 18:23:37 +0000 (14:23 -0400)]
drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram
Use the function of amdgpu_bo_vm_destroy to handle the resource release
of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but
vmbo->shadow_list was not, which caused a null pointer reference error
in amdgpu_device_recover_vram when GPU reset.
Fixes:
6c032c37ac3e ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>