Merge branch 'for-3.5/dt2' of git://git./linux/kernel/git/swarren/linux-tegra into for-next

Stephen Warren <swarren@wwwdotorg.org> writes:
  This branch is based on the merge of the following branches from the
  Tegra repo, which are all already pulled into arm-soc:

  for-3.5/tegra30-audio
  for-3.5/usb-ulpi
  for-3.5/dt
  ... which are all based on for-3.5/gpio-pinmux

* 'for-3.5/dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: dt: tegra: invert status=disable vs status=okay
  ARM: dt: tegra: consistent basic property ordering
  ARM: dt: tegra: sort nodes based on bus order
  ARM: dt: tegra: remove duplicate device_type property
  ARM: dt: tegra: consistenly use lower-case for hex constants
  ARM: dt: tegra: format regs properties consistently
  ARM: dt: tegra: gpio comment cleanup
  ARM: dt: tegra: remove unnecessary unit addresses
  ARM: dt: tegra: whitespace cleanup
  ARM: dt: tegra cardhu: fix typo in SDHCI node name
  ARM: dt: tegra: cardhu: register core regulator tps62361
  ARM: dt: tegra30.dtsi: Add SMMU node
  ARM: dt: tegra20.dtsi: Add GART node
  ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra: Add device tree support for AHB

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dt: tegra: invert status=disable vs status=okay

In tegra*.dtsi, set status="disable" for all HW modules that the board
design may choose not to use. Update all boards to specifically enable
any of those modules that are useful by setting status="okay".

This makes board files say which features they do use, rather than which
they don't, which feels more logical. It also makes the .dts files
slightly smaller, at least for existing content.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: consistent basic property ordering

Put properties in order compatible, reg, interrupts, then anything else
the node has.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: sort nodes based on bus order

Sort the nodes according to the following rules:
* First, any overrides for properties or nodes created by included files,
  in the order they appeared in the include file.
* Second, any nodes with a reg property, in numerical order.
* Third, any nodes without a reg property, in alphabetical order of node
  name.

The second sorting rule at least will probably help if/when we need to
explicitly insert nodes for the various busses in Tegra; that will just
be an indentation change rather than also a node re-ordering.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: remove duplicate device_type property

It's already specified in skeleton.dtsi, included via tegra20.dtsi.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: consistenly use lower-case for hex constants

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: format regs properties consistently

Place each reg "entry" on its own line, and wrap the whole list in
<> rather than each individual entry.

The convention chosen here is slightly arbitrary, but is not consistent
throughout all Tegra files.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: gpio comment cleanup

Ensure that all Tegraa GPIO specifiers contain a comment indicating which
GPIO name the number refers to.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: remove unnecessary unit addresses

DT node names only need to include the unit address if it's required to
make the node name unique. Remove the unnecessary unit addresses.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra: whitespace cleanup

Consistently don't place a space after < or before >.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>

ARM: dt: tegra cardhu: fix typo in SDHCI node name

Cardhu's eMMC controller is on sdhci@78000600, not sdhci@78000400.
Fix the typo. This roughly doubles the IO performance, since the
support-8bit property actually takes effect.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: stable@kernel.org # v3.4

ARM: dt: tegra: cardhu: register core regulator tps62361

Add device info for the core regulator tps62360 in tegra-cardhu
dts file.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren: fixed node name to reflect actual device type]
Signed-off-by: Stephen Warren <swarren@nvidia.com>

ARM: dt: tegra30.dtsi: Add SMMU node

Add a node for the Tegra30 SMMU

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

ARM: dt: tegra20.dtsi: Add GART node

Add a node for the Tegra20 GART

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes

Add Tegra MC(Memory Controller) nodes for tegra30.dtsi.

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes

Add Tegra MC(Memory Controller) nodes for tegra20.dtsi.

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

ARM: dt: tegra: Add device tree support for AHB

Add AHB entry for tegra20/30.

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Merge branch 'for-3.5/dt' into for-3.5/dt2-new

Merge branch 'for-3.5/usb-ulpi' into for-3.5/dt2-new

Merge branch 'imx/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6.git into next/dt2

Shawn Guo <shawn.guo@linaro.org> writes:

  I chose to base it on Sascha's imx-common-clk series than -rc, because
  otherwise it will keep patching clock file that has been removed by
  imx-common-clk series.  It also depends on imx-pinctrl pull-request
  I just sent to be functional.

  Note: when imx-common-clk and imx-pinctrl get merged together, the
  following files will have conflicts.  But the conflicts should not be
  so hard to resolve.

[arnd: resolved those merge conflicts by pulling pinctrl branch]

* imx/dt: (24 commits)
  ARM: dts: imx53-qsb: enable audio support
  ARM: dts: imx51-babbage: enable audio support
  ARM: imx: add audio codec clk lookup for imx53-qsb
  ARM: imx: add audmux pad setting for imx51-babbage
  ARM: imx: add more imx5 ssi clocks
  ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support
  ARM: dts: imx6q-sabrelite: add serial2 pinctrl support
  ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
  ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
  ARM: imx6q: add ssi1_ipg clk_lookup
  ARM: dts: imx6q-sabrelite: add audmux pinctrl support
  ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
  ARM: dts: imx6q-sabrelite: add audmux device
  ARM: dts: imx6q-sabrelite: add ssi device
  ARM: dts: imx6q-arm2: add pinctrl state for usdhc
  ARM: imx6: Add UART2 for low-level debug
  ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled
  ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function
  ARM: dts: imx6q-sabrelite: Add SPI NOR support
  ARM: dts: Add basic support for imx6q-sabresd
  ...

Pulls in imx/pinctrl and imx/clock as dependencies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge branch 'imx/pinctrl' into imx/dt

Conflicts:
drivers/mmc/host/sdhci-esdhc-imx.c
drivers/net/ethernet/freescale/fec.c
drivers/spi/spi-imx.c
drivers/tty/serial/imx.c

This resolves some simply but annoying conflicts.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge branch 'mxs/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt2

* 'mxs/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: (51 commits)
  ARM: dts: enable audio support for imx28-evk
  ARM: dts: enable i2c device for imx28-evk
  i2c: mxs: add device tree probe support
  ARM: dts: enable mmc for imx28-evk
  ARM: dts: enable mmc for imx23-evk
  mmc: mxs-mmc: add device tree support
  mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host
  mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host
  mmc: mxs-mmc: use devm_* helper to make cleanup simpler
  mmc: mxs-mmc: move header from mach into linux folder
  mmc: mxs-mmc: get rid of the use of cpu_is_xxx
  mmc: mxs-mmc: let ssp_is_old take host as parameter
  mmc: mxs-mmc: use global stmp_device functionality
  ARM: mxs: add gpio support for device tree boot
  gpio/mxs: add device tree probe
  gpio/mxs: get rid of the use of cpu_is_xxx
  gpio/mxs: use devm_* helpers to make error handling simple
  ARM: mxs: add mxs-dma dt support
  ARM: mxs: do not add dma device by default
  dma: mxs-dma: add device tree probe support
  ...

ARM: dts: enable audio support for imx28-evk

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: enable i2c device for imx28-evk

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

i2c: mxs: add device tree probe support

Add device tree probe support for i2c-mxs driver.  So far, it's only
been tested on imx28.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>

ARM: dts: enable mmc for imx28-evk

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: enable mmc for imx23-evk

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

mmc: mxs-mmc: add device tree support

It adds device tree probe support for mxs-mmc driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>

mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host

Copy wp_gpio from platform_data into struct mxs_mmc_host, so that
the use of platform_data can be limited in probe function, which
will ease the device tree probe.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>

mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host

It replaces dma_res with dma_channel in struct mxs_mmc_host, so that
the device tree support will be a little easier, since dma channel
can not be retrieved from "struct resource *dma_res".

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>

mmc: mxs-mmc: use devm_* helper to make cleanup simpler

Use devm_request_and_ioremap and devm_request_irq helpers to clean up
the code a little bit.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>

mmc: mxs-mmc: move header from mach into linux folder

Rename arch/arm/mach-mxs/include/mach/mmc.h to
include/linux/mmc/mxs-mmc.h, so that mxs-mmc driver becomes
<mach/*> inclusion free.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>

mmc: mxs-mmc: get rid of the use of cpu_is_xxx

The register HW_SSP_VERSION is broken for ssp version detection,
as the address of the register is different between imx23 and imx28.
Let's use platform_device_id to detect the device, so that the use
of cpu_is_xxx can be removed.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>

mmc: mxs-mmc: let ssp_is_old take host as parameter

Let macro ssp_is_old take host as parameter to make the code easy
to read.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>

mmc: mxs-mmc: use global stmp_device functionality

Use global stmp_device functionality to reduce mach-dependency.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>

ARM: mxs: add gpio support for device tree boot

It adds gpio support for device tree boot.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

gpio/mxs: add device tree probe

It adds device tree probe for gpio-mxs driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

gpio/mxs: get rid of the use of cpu_is_xxx

It removes the use of cpu_is_xxx from gpio-mxs driver and instead use
platform_device_id to identify the device.  Accordingly, mxs platform
code is changed to register gpio device with different names, and
the registeration are done in soc specific initialization functions
now, so postcore_initcall(mxs_add_mxs_gpio) gets removed.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

gpio/mxs: use devm_* helpers to make error handling simple

It uses devm_* helpers to make the error handling of probe clean
and simple.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

ARM: mxs: add mxs-dma dt support

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>

ARM: mxs: do not add dma device by default

This will cause conflict when dt is enabled.
So let each platform add dma devices respectively.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>

dma: mxs-dma: add device tree probe support

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>

dma: mxs-dma: make platform_device_id more generic

Rewrite mxs_dma_is_apbh and mxs_dma_is_apbx in order to support
other SoCs like imx6q and reform the platform_device_id for the
better further dt support.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>

dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter

Let macros dma_is_apbh and apbh_is_old take mxs_dma as parameter
to make the code easy to read.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

dma: mxs-dma: use global stmp_device functionality

This can get rid of the mach-dependency.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>

ARM: mxs: always build in device tree support

As the ultimate for mxs platform is to convert over to device tree,
let's start always building in device tree support for the platform.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>

ARM: mxs: add initial device tree support for imx23-evk board

It adds initial device tree support for imx23-evk board, and only
serial console is enabled.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>

ARM: mxs: add initial device tree support for imx28-evk board

This patch includes basic dt support which can boot via nfs rootfs.

Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>

Merge branches 'clk/mxs' and 'imx/pinctrl/for-3.5' into mxs/dt/for-3.5

ARM: mxs: enable pinctrl support

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

video: mxsfb: adopt pinctrl support

Cc: linux-fbdev@vger.kernel.org
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ASoC: mxs-saif: adopt pinctrl support

Cc: alsa-devel@alsa-project.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

i2c: mxs: adopt pinctrl support

Cc: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

mtd: nand: gpmi: adopt pinctrl support

Cc: linux-mtd@lists.infradead.org
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

mmc: mxs-mmc: adopt pinctrl support

Cc: linux-mmc@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>

serial: mxs-auart: adopt pinctrl support

Cc: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

serial: amba-pl011: adopt pinctrl support

Cc: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

spi/imx: adopt pinctrl support

Cc: spi-devel-general@lists.sourceforge.net
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

i2c: imx: adopt pinctrl support

Cc: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

can: flexcan: adopt pinctrl support

Cc: linux-can@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

net: fec: adopt pinctrl support

Cc: netdev@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>

ARM: dts: imx53-qsb: enable audio support

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx51-babbage: enable audio support

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx: add audio codec clk lookup for imx53-qsb

On imx53-qsb board, the clk ssi_ext.0 is used as the clock input
to audio codec sgtl5000.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx: add audmux pad setting for imx51-babbage

Before i.MX51 Pinctrl support is available, we have to reply on
the iomux initialization in non-DT board file to set iomux up for
DT boot.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx: add more imx5 ssi clocks

Add more imx5 ssi clocks and lookup for device tree probe.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support

Add Dialog DA9053 regulators support for imx53-qsb (Loco board)

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Amit Kucheria <amit.kucheria@canonical.com>
Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-sabrelite: add serial2 pinctrl support

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx6q: add ssi1_ipg clk_lookup

It's used by audio drivers.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-sabrelite: add audmux pinctrl support

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-sabrelite: add audmux device

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-sabrelite: add ssi device

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-arm2: add pinctrl state for usdhc

Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx6: Add UART2 for low-level debug

To be able to enable early debugging on boards using the UART2 for the
console, add the option for early debugging on UART2.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled

It fixes the following compile error with network disabled in
imx_v6_v7_defconfig.

arch/arm/mach-imx/built-in.o: In function `ksz9021rn_phy_fixup':
imx53-dt.c:(.text+0x5f70): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5f84): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5f98): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5fac): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5fc0): undefined reference to `mdiobus_write'
arch/arm/mach-imx/built-in.o: In function `imx6q_init_machine':
imx53-dt.c:(.init.text+0x387c): undefined reference to `phy_register_fixup_for_uid'
make: *** [.tmp_vmlinux1] Error 1

Reported-by: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function

It'll be easier to add other board specific code.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q-sabrelite: Add SPI NOR support

mx6qsabrelite has a sst25vf016b SPI NOR flash connected to eCSPI1.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: Add basic support for imx6q-sabresd

Add basic support for imx6q-sabresd.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx6q-arm2: Remove hardcoded mac address

Do not hardcode the local mac address.

Let bootloader retrieve it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: imx: rename uart and fec device tree nodes

It has been pointed out by device tree maintainer for several times
that the generic names 'serial' and 'ethernet' should be used for
those devices per ePAPR.  Renames imx uart and fec device tree nodes
to stop them being bad examples.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx: Remove bootargs field

Remove bootargs field as this information is retrieved from the bootloader.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: dts: imx6q: add anatop regulators

Add anatop regulators to imx6q.dtsi for all imx6q platforms.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

tty: serial: imx: adopt pinctrl support

Cc: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

mmc: sdhci-imx-esdhc: adopt pinctrl support

Cc: linux-mmc@vger.kernel.org
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>

Merge branch 'for-3.5/dt' of git://git./linux/kernel/git/swarren/linux-tegra into next/dt2

By Stephen Warren (29) and others
via Stephen Warren
* 'for-3.5/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (43 commits)
  ARM: dt: tegra trimslice: add support for audio
  ARM: dt: tegra trimslice: enable SDHCI1 controller
  ARM: dt: tegra trimslice: add RTC I2C device
  ARM: dt: tegra seaboard: add i2c devices
  ARM: dt: tegra seaboard: configure I2C2 pinmux
  ARM: dt: tegra seaboard: fix I2C2 SCL rate
  ARM: dt: tegra: enable als and proximity sensor
  + pinctrl mergebase branch

The pinctrl mergebase branch merge conflicts in drivers/pinctrl/core.c
that were resolved.

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM i.MX: remove now unused clock files

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6: implement clocks using common clock framework

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

ARM i.MX35: implement clocks using common clock framework

This patch also adds the SPDIF baud clock mux and dividers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

ARM i.MX5: implement clocks using common clock framework

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

ARM: mxs: remove now unused timer_clk argument from mxs_timer_init

With old mxs clock support removed, the timer_clk argument of
mxs_timer_init is unused now, so remove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: mxs: remove old clock support

The mxs clock has been switched to common clock framework, so the old
clock support can be removed now.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: mxs: switch to common clk framework

It switches mxs clock support to common clk framework based drivers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: mxs: change the lookup name for fec phy clock

Change the fec phy clock lookup name to be more accurate.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

ARM: mxs: request clock for timer

When mxs_timer_init() does not have a timer_clk passed in, it should
try to request clock from clkdev system.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

clk: mxs: add clock support for imx28

Add imx28 clock support based on common clk framework.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

clk: mxs: add clock support for imx23

Add imx23 clock support based on common clk framework.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

clk: mxs: add mxs specific clocks

Add mxs specific clocks, pll, reference clock (PFD), integer divider
and fractional divider.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>