Lyude Paul [Fri, 11 Jan 2019 00:53:41 +0000 (19:53 -0500)]
drm/dp_mst: Start tracking per-port VCPI allocations
There has been a TODO waiting for quite a long time in
drm_dp_mst_topology.c:
/* We cannot rely on port->vcpi.num_slots to update
* topology_state->avail_slots as the port may not exist if the parent
* branch device was unplugged. This should be fixed by tracking
* per-port slot allocation in drm_dp_mst_topology_state instead of
* depending on the caller to tell us how many slots to release.
*/
That's not the only reason we should fix this: forcing the driver to
track the VCPI allocations throughout a state's atomic check is
error prone, because it means that extra care has to be taken with the
order that drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots() are called in in order to ensure
idempotency. Currently the only driver actually using these helpers,
i915, doesn't even do this correctly: multiple ->best_encoder() checks
with i915's current implementation would not be idempotent and would
over-allocate VCPI slots, something I learned trying to implement
fallback retraining in MST.
So: simplify this whole mess, and teach drm_dp_atomic_find_vcpi_slots()
and drm_dp_atomic_release_vcpi_slots() to track the VCPI allocations for
each port. This allows us to ensure idempotency without having to rely
on the driver as much. Additionally: the driver doesn't need to do any
kind of VCPI slot tracking anymore if it doesn't need it for it's own
internal state.
Additionally; this adds a new drm_dp_mst_atomic_check() helper which
must be used by atomic drivers to perform validity checks for the new
VCPI allocations incurred by a state.
Also: update the documentation and make it more obvious that these
/must/ be called by /all/ atomic drivers supporting MST.
Changes since v9:
* Add some missing changes that were requested by danvet that I forgot
about after I redid all of the kref stuff:
* Remove unnecessary state changes in intel_dp_mst_atomic_check
* Cleanup atomic check logic for VCPI allocations - all we need to check in
compute_config is whether or not this state disables a CRTC, then free
VCPI based off that
Changes since v8:
* Fix compile errors, whoops!
Changes since v7:
- Don't check for mixed stale/valid VCPI allocations, just rely on
connector registration to stop such erroneous modesets
Changes since v6:
- Keep a kref to all of the ports we have allocations on. This required
a good bit of changing to when we call drm_dp_find_vcpi_slots(),
mainly that we need to ensure that we only redo VCPI allocations on
actual mode or CRTC changes, not crtc_state->active changes.
Additionally, we no longer take the registration of the DRM connector
for each port into account because so long as we have a kref to the
port in the new or previous atomic state, the connector will stay
registered.
- Use the small changes to drm_dp_put_port() to add even more error
checking to make misusage of the helpers more obvious. I added this
after having to chase down various use-after-free conditions that
started popping up from the new helpers so no one else has to
troubleshoot that.
- Move some accidental DRM_DEBUG_KMS() calls to DRM_DEBUG_ATOMIC()
- Update documentation again, note that find/release() should both not be
called on the same port in a single atomic check phase (but multiple
calls to one or the other is OK)
Changes since v4:
- Don't skip the atomic checks for VCPI allocations if no new VCPI
allocations happen in a state. This makes the next change I'm about
to list here a lot easier to implement.
- Don't ignore VCPI allocations on destroyed ports, instead ensure that
when ports are destroyed and still have VCPI allocations in the
topology state, the only state changes allowed are releasing said
ports' VCPI. This prevents a state with a mix of VCPI allocations
from destroyed ports, and allocations from valid ports.
Changes since v3:
- Don't release VCPI allocations in the topology state immediately in
drm_dp_atomic_release_vcpi_slots(), instead mark them as 0 and skip
over them in drm_dp_mst_duplicate_state(). This makes it so
drm_dp_atomic_release_vcpi_slots() is still idempotent while also
throwing warnings if the driver messes up it's book keeping and tries
to release VCPI slots on a port that doesn't have any pre-existing
VCPI allocation - danvet
- Change mst_state/state in some debugging messages to "mst state"
Changes since v2:
- Use kmemdup() for duplicating MST state - danvet
- Move port validation out of duplicate state callback - danvet
- Handle looping through MST topology states in
drm_dp_mst_atomic_check() so the driver doesn't have to do it
- Fix documentation in drm_dp_atomic_find_vcpi_slots()
- Move the atomic check for each individual topology state into it's
own function, reduces indenting
- Don't consider "stale" MST ports when calculating the bandwidth
requirements. This is needed because originally we relied on the
state duplication functions to prune any stale ports from the new
state, which would prevent us from incorrectly considering their
bandwidth requirements alongside legitimate new payloads.
- Add function references in drm_dp_atomic_release_vcpi_slots() - danvet
- Annotate atomic VCPI and atomic check functions with __must_check
- danvet
Changes since v1:
- Don't use the now-removed ->atomic_check() for private objects hook,
just give drivers a function to call themselves
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-19-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:40 +0000 (19:53 -0500)]
drm/dp_mst: Add some atomic state iterator macros
Changes since v6:
- Move EXPORT_SYMBOL() for drm_dp_mst_topology_state_funcs to this
commit
- Document __drm_dp_mst_state_iter_get() and note that it shouldn't be
called directly
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-18-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:39 +0000 (19:53 -0500)]
drm/nouveau: Grab payload lock in nv50_msto_payload()
Going through the currently programmed payloads isn't safe without
holding mgr->payload_lock, so actually do that and warn if anyone tries
calling nv50_msto_payload() in the future without grabbing the right
locks.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-17-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:38 +0000 (19:53 -0500)]
drm/nouveau: Stop unsetting mstc->port, use malloc refs
Same as we did for i915, but for nouveau this time. Additionally, we
grab a malloc reference to the port that lasts for the entire lifetime
of nv50_mstc, which gives us the guarantee that mstc->port will always
point to valid memory for as long as the mstc stays around.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-16-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:37 +0000 (19:53 -0500)]
drm/nouveau: Keep malloc references to MST ports
Now that we finally have a sane way to keep port allocations around, use
it to fix the potential unchecked ->port accesses that nouveau makes by
making sure we keep the mst port allocated for as long as it's
drm_connector is accessible.
Additionally, now that we've guaranteed that mstc->port is allocated for
as long as we keep mstc around we can remove the connector registration
checks for codepaths which release payloads, allowing us to release
payloads on active topologies properly. These registration checks were
only required before in order to avoid situations where mstc->port could
technically be pointing at freed memory.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-15-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:36 +0000 (19:53 -0500)]
drm/nouveau: Remove unnecessary VCPI checks in nv50_msto_cleanup()
There is no need to look at the port's VCPI allocation before calling
drm_dp_mst_deallocate_vcpi(), as we already have msto->disabled to let
us avoid cleaning up an msto more then once. The DP MST core will never
call drm_dp_mst_deallocate_vcpi() on it's own, which is presumably what
these checks are meant to protect against.
More importantly though, we're about to stop clearing mstc->port in the
next commit, which means if we could potentially hit a use-after-free
error if we tried to check mstc->port->vcpi here. So to make life easier
for anyone who bisects this code in the future, use msto->disabled
instead to check whether or not we need to deallocate VCPI instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-14-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:35 +0000 (19:53 -0500)]
drm/nouveau: Remove bogus cleanup in nv50_mstm_add_connector()
Trying to destroy the connector using mstc->connector.funcs->destroy()
if connector initialization fails is wrong: there is no possible
codepath in nv50_mstc_new where nv50_mstm_add_connector() would return
<0 and mstc would be non-NULL.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-13-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:34 +0000 (19:53 -0500)]
drm/amdgpu/display: Keep malloc ref to MST port
Just like i915 and nouveau, it's a good idea for us to hold a malloc
reference to the port here so that we never pass a freed pointer to any
of the DP MST helper functions.
Also, we stop unsetting aconnector->port in
dm_dp_destroy_mst_connector(). There's literally no point to that
assignment that I can see anyway.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-12-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:33 +0000 (19:53 -0500)]
drm/i915: Keep malloc references to MST ports
So that the ports stay around until we've destroyed the connectors, in
order to ensure that we don't pass an invalid pointer to any MST helpers
once we introduce the new MST VCPI helpers.
Changes since v1:
* Move drm_dp_mst_get_port_malloc() to where we assign
intel_connector->port - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-11-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:32 +0000 (19:53 -0500)]
drm/dp_mst: Fix payload deallocation on hotplugs using malloc refs
Up until now, freeing payloads on remote MST hubs that just had ports
removed has almost never worked because we've been relying on port
validation in order to stop us from accessing ports that have already
been freed from memory, but ports which need their payloads released due
to being removed will never be a valid part of the topology after
they've been removed.
Since we've introduced malloc refs, we can replace all of the validation
logic in payload helpers which are used for deallocation with some
well-placed malloc krefs. This ensures that regardless of whether or not
the ports are still valid and in the topology, any port which has an
allocated payload will remain allocated in memory until it's payloads
have been removed - finally allowing us to actually release said
payloads correctly.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-10-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:31 +0000 (19:53 -0500)]
drm/dp_mst: Stop releasing VCPI when removing ports from topology
This has never actually worked, and isn't needed anyway: the driver's
always going to try to deallocate VCPI when it tears down the display
that the VCPI belongs to.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-9-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:30 +0000 (19:53 -0500)]
drm/dp_mst: Restart last_connected_port_and_mstb() if topology ref fails
While this isn't a complete fix, this will improve the reliability of
drm_dp_get_last_connected_port_and_mstb() pretty significantly during
hotplug events, since there's a chance that the in-memory topology tree
may not be fully updated when drm_dp_get_last_connected_port_and_mstb()
is called and thus might end up causing our search to fail on an mstb
whose topology refcount has reached 0, but has not yet been removed from
it's parent.
Ideally, we should further fix this problem by ensuring that we deal
with the potential for racing with a hotplug event, which would look
like this:
* drm_dp_payload_send_msg() retrieves the last living relative of mstb
with drm_dp_get_last_connected_port_and_mstb()
* drm_dp_payload_send_msg() starts building payload message
At the same time, mstb gets unplugged from the topology and is no
longer the actual last living relative of the original mstb
* drm_dp_payload_send_msg() tries sending the payload message, hub times
out
* Hub timed out, we give up and run away-resulting in the payload being
leaked
This could be fixed by restarting the
drm_dp_get_last_connected_port_and_mstb() search whenever we get a
timeout, sending the payload to the new mstb, then repeating until
either the entire topology is removed from the system or
drm_dp_get_last_connected_port_and_mstb() fails. But since the above
race condition is not terribly likely, we'll address that in a later
patch series once we've improved the recovery handling for VCPI
allocations in the rest of the DP MST helpers.
Changes since v1:
* Convert kerneldoc for drm_dp_get_last_connected_port_and_mstb to
normal comment - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-8-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:29 +0000 (19:53 -0500)]
drm/dp_mst: Introduce new refcounting scheme for mstbs and ports
The current way of handling refcounting in the DP MST helpers is really
confusing and probably just plain wrong because it's been hacked up many
times over the years without anyone actually going over the code and
seeing if things could be simplified.
To the best of my understanding, the current scheme works like this:
drm_dp_mst_port and drm_dp_mst_branch both have a single refcount. When
this refcount hits 0 for either of the two, they're removed from the
topology state, but not immediately freed. Both ports and branch devices
will reinitialize their kref once it's hit 0 before actually destroying
themselves. The intended purpose behind this is so that we can avoid
problems like not being able to free a remote payload that might still
be active, due to us having removed all of the port/branch device
structures in memory, as per:
commit
91a25e463130 ("drm/dp/mst: deallocate payload on port destruction")
Which may have worked, but then it caused use-after-free errors. Being
new to MST at the time, I tried fixing it;
commit
263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
But, that was broken: both drm_dp_mst_port and drm_dp_mst_branch structs
are validated in almost every DP MST helper function. Simply put, this
means we go through the topology and try to see if the given
drm_dp_mst_branch or drm_dp_mst_port is still attached to something
before trying to use it in order to avoid dereferencing freed memory
(something that has happened a LOT in the past with this library).
Because of this it doesn't actually matter whether or not we keep keep
the ports and branches around in memory as that's not enough, because
any function that validates the branches and ports passed to it will
still reject them anyway since they're no longer in the topology
structure. So, use-after-free errors were fixed but payload deallocation
was completely broken.
Two years later, AMD informed me about this issue and I attempted to
come up with a temporary fix, pending a long-overdue cleanup of this
library:
commit
c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
But then that introduced use-after-free errors, so I quickly reverted
it:
commit
9765635b3075 ("Revert "drm/dp_mst: Skip validating ports during destruction, just ref"")
And in the process, learned that there is just no simple fix for this:
the design is just broken. Unfortunately, the usage of these helpers are
quite broken as well. Some drivers like i915 have been smart enough to
avoid accessing any kind of information from MST port structures, but
others like nouveau have assumed, understandably so, that
drm_dp_mst_port structures are normal and can just be accessed at any
time without worrying about use-after-free errors.
After a lot of discussion, me and Daniel Vetter came up with a better
idea to replace all of this.
To summarize, since this is documented far more indepth in the
documentation this patch introduces, we make it so that drm_dp_mst_port
and drm_dp_mst_branch structures have two different classes of
refcounts: topology_kref, and malloc_kref. topology_kref corresponds to
the lifetime of the given drm_dp_mst_port or drm_dp_mst_branch in it's
given topology. Once it hits zero, any associated connectors are removed
and the branch or port can no longer be validated. malloc_kref
corresponds to the lifetime of the memory allocation for the actual
structure, and will always be non-zero so long as the topology_kref is
non-zero. This gives us a way to allow callers to hold onto port and
branch device structures past their topology lifetime, and dramatically
simplifies the lifetimes of both structures. This also finally fixes the
port deallocation problem, properly.
Additionally: since this now means that we can keep ports and branch
devices allocated in memory for however long we need, we no longer need
a significant amount of the port validation that we currently do.
Additionally, there is one last scenario that this fixes, which couldn't
have been fixed properly beforehand:
- CPU1 unrefs port from topology (refcount 1->0)
- CPU2 refs port in topology(refcount 0->1)
Since we now can guarantee memory safety for ports and branches
as-needed, we also can make our main reference counting functions fix
this problem by using kref_get_unless_zero() internally so that topology
refcounts can only ever reach 0 once.
Changes since v4:
* Change the kernel-figure summary for dp-mst/topology-figure-1.dot a
bit - danvet
* Remove figure numbers - danvet
Changes since v3:
* Remove rebase detritus - danvet
* Split out purely style changes into separate patches - hwentlan
Changes since v2:
* Fix commit message - checkpatch
* s/)-1/) - 1/g - checkpatch
Changes since v1:
* Remove forward declarations - danvet
* Move "Branch device and port refcounting" section from documentation
into kernel-doc comments - danvet
* Export internal topology lifetime functions into their own section in
the kernel-docs - danvet
* s/@/&/g for struct references in kernel-docs - danvet
* Drop the "when they are no longer being used" bits from the kernel
docs - danvet
* Modify diagrams to show how the DRM driver interacts with the topology
and payloads - danvet
* Make suggested documentation changes for
drm_dp_mst_topology_get_mstb() and drm_dp_mst_topology_get_port() -
danvet
* Better explain the relationship between malloc refs and topology krefs
in the documentation for drm_dp_mst_topology_get_port() and
drm_dp_mst_topology_get_mstb() - danvet
* Fix "See also" in drm_dp_mst_topology_get_mstb() - danvet
* Rename drm_dp_mst_topology_get_(port|mstb)() ->
drm_dp_mst_topology_try_get_(port|mstb)() and
drm_dp_mst_topology_ref_(port|mstb)() ->
drm_dp_mst_topology_get_(port|mstb)() - danvet
* s/should/must in docs - danvet
* WARN_ON(refcount == 0) in topology_get_(mstb|port) - danvet
* Move kdocs for mstb/port structs inline - danvet
* Split drm_dp_get_last_connected_port_and_mstb() changes into their own
commit - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-7-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:28 +0000 (19:53 -0500)]
drm/dp_mst: Rename drm_dp_mst_get_validated_(port|mstb)_ref and friends
s/drm_dp_get_validated_port_ref/drm_dp_mst_topology_get_port_validated/
s/drm_dp_put_port/drm_dp_mst_topology_put_port/
s/drm_dp_get_validated_mstb_ref/drm_dp_mst_topology_get_mstb_validated/
s/drm_dp_put_mst_branch_device/drm_dp_mst_topology_put_mstb/
This is a much more consistent naming scheme, and will make even more
sense once we redesign how the current refcounting scheme here works.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-6-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:27 +0000 (19:53 -0500)]
drm/dp_mst: Fix some formatting in drm_dp_mst_deallocate_vcpi()
Split some stuff across multiple lines
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-5-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:26 +0000 (19:53 -0500)]
drm/dp_mst: Fix some formatting in drm_dp_mst_allocate_vcpi()
Fix some indenting, split some stuff across multiple lines.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-4-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:25 +0000 (19:53 -0500)]
drm/dp_mst: Fix some formatting in drm_dp_payload_send_msg()
Split some stuff across multiple lines, remove some unnecessary braces
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-3-lyude@redhat.com
Lyude Paul [Fri, 11 Jan 2019 00:53:24 +0000 (19:53 -0500)]
drm/dp_mst: Fix some formatting in drm_dp_add_port()
Reindent some stuff, and split some stuff across multiple lines so we
aren't going over the text width limit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-2-lyude@redhat.com
Daniele Castagna [Wed, 9 Jan 2019 18:56:39 +0000 (15:56 -0300)]
drm/rockchip: Add reflection properties
Add the KMS plane rotation property to the DRM rockchip driver,
for SoCs RK3328, RK3368 and RK3399.
RK3288 only supports rotation at the display level (i.e. CRTC),
but for now we are only interested in plane rotation.
This commit only adds support for the value of reflect-y
and reflect-x (i.e. mirroring).
Note that y-mirroring is not compatible with YUV.
The following modetest commands would test this feature,
where 30 is the plane ID, and 49 = rotate_0 + relect_y + reflect_x.
X mirror:
modetest -s 43@33:1920x1080@XR24 -w 30:rotation:17
Y mirror:
modetest -s 43@33:1920x1080@XR24 -w 30:rotation:33
XY mirror:
modetest -s 43@33:1920x1080@XR24 -w 30:rotation:49
Signed-off-by: Daniele Castagna <dcastagna@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109185639.5093-4-ezequiel@collabora.com
Ezequiel Garcia [Wed, 9 Jan 2019 18:56:38 +0000 (15:56 -0300)]
drm/rockchip: Separate RK3288 from RK3368 win01 registers
This commit splits the registers for RK3288 from those
for RK3328, RK3368 and RK3399. It seems RK3288 does not
support plane x-y-mirroring, and so in order to support this
for the other SoCs, we need to have separate set of registers
for win0 and win1.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109185639.5093-3-ezequiel@collabora.com
Ezequiel Garcia [Wed, 9 Jan 2019 18:56:37 +0000 (15:56 -0300)]
drm/rockchip: Fix typo in VOP macros argument
Fix a small typo in the macros VOP argument. The macro argument
is currently wrongly named "x", and then never used. The code
built fine almost by accident, as the macros are always used
in a context where a proper "vop" symbol exists.
This fix is almost cosmetic, as the resulting code shouldn't change.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109185639.5093-2-ezequiel@collabora.com
Daniele Castagna [Tue, 8 Jan 2019 21:46:59 +0000 (18:46 -0300)]
drm/rockchip: Fix YUV buffers color rendering
Currently, YUV hardware overlays are converted to RGB using
a color space conversion different than BT.601.
The result is that colors of e.g. NV12 buffers don't match
colors of YUV hardware overlays.
In order to fix this, enable YUV2YUV and set appropriate coefficients
for formats such as NV12 to be displayed correctly.
This commit was tested using modetest, gstreamer and chromeos (hardware
accelerated video playback). Before the commit, tests rendering
with NV12 format resulted in colors not displayed correctly.
Test examples (Tested on RK3399 and RK3288 boards
connected to HDMI monitor):
$ modetest 39@32:1920x1080@NV12
$ gst-launch-1.0 videotestrc ! video/x-raw,format=NV12 ! kmssink
Signed-off-by: Daniele Castagna <dcastagna@chromium.org>
[ezequiel: rebase on linux-next and massage commit log]
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108214659.28794-1-ezequiel@collabora.com
Enric Balletbo i Serra [Wed, 5 Dec 2018 12:33:10 +0000 (10:33 -0200)]
drm/rockchip: update cursors asynchronously through atomic.
Add support to async updates of cursors by using the new atomic
interface for that.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[updated for upstream]
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205123310.7965-1-helen.koike@collabora.com
Shayenne Moura [Thu, 10 Jan 2019 18:13:01 +0000 (16:13 -0200)]
drm: msm: Cleanup drm_display_mode print str
This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in msm files.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/3e2dcd38c964061f245b0ae22186c71da06e9742.1547143069.git.shayenneluzmoura@gmail.com
Linus Walleij [Thu, 10 Jan 2019 11:40:49 +0000 (12:40 +0100)]
drm/fb-helper: Scale back depth to supported maximum
The following happened when migrating an old fbdev driver to DRM:
The Integrator/CP PL111 supports 16BPP but only ARGB1555/ABGR1555
or XRGB1555/XBGR1555 i.e. the maximum depth is 15.
This makes the initialization of the framebuffer fail since
the code in drm_fb_helper_single_fb_probe() assigns the same value
to sizes.surface_bpp and sizes.surface_depth. I.e. it simply assumes
a 1-to-1 mapping between BPP and depth, which is true in most cases
but not for this hardware that only support odd formats.
To support the odd case of a driver supporting 16BPP with only 15
bits of depth, this patch will make the code loop over the formats
supported on the primary plane on each CRTC managed by the FB
helper and cap the depth to the maximum supported on any primary
plane.
On the PL110 Integrator, this makes drm_mode_legacy_fb_format()
select DRM_FORMAT_XRGB1555 which is acceptable for this driver, and
thus we get framebuffer, penguin and console on the Integrator/CP.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110114049.10618-1-linus.walleij@linaro.org
Ville Syrjälä [Tue, 8 Jan 2019 17:28:28 +0000 (19:28 +0200)]
drm/edid: Add display_info.rgb_quant_range_selectable
Move the CEA-861 QS bit handling entirely into the edid code. No
need to bother the drivers with this.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVERS FOR VC4)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 8 Jan 2019 17:28:27 +0000 (19:28 +0200)]
drm/radeon: Use drm_hdmi_avi_infoframe_quant_range()
Fill out the AVI infoframe quantization range bits using
drm_hdmi_avi_infoframe_quant_range() instead of hand rolling it.
This changes the behaviour slightly as
drm_hdmi_avi_infoframe_quant_range() will set a non-zero Q bit
even when QS==0 iff the Q bit matched the default quantization
range for the given mode. This matches the recommendation in
HDMI 2.0 and is allowed even before that.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-3-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 8 Jan 2019 17:28:26 +0000 (19:28 +0200)]
drm/i915: Use drm_hdmi_avi_infoframe_quant_range() for SDVO HDMI as well
Fill out the AVI infoframe quantization range bits using
drm_hdmi_avi_infoframe_quant_range() for SDVO HDMI encoder as well.
This changes the behaviour slightly as
drm_hdmi_avi_infoframe_quant_range() will set a non-zero Q bit
even when QS==0 iff the Q bit matched the default quantization
range for the given mode. This matches the recommendation in
HDMI 2.0 and is allowed even before that.
v2: Pimp commit msg (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-2-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 8 Jan 2019 17:28:25 +0000 (19:28 +0200)]
drm/edid: Pass connector to AVI infoframe functions
Make life easier for drivers by simply passing the connector
to drm_hdmi_avi_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range(). That way drivers don't
need to worry about is_hdmi2_sink mess.
v2: Make is_hdmi2_sink() return true for sil-sii8620
Adapt to omap/vc4 changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-1-ville.syrjala@linux.intel.com
Daniel Vetter [Thu, 10 Jan 2019 10:30:45 +0000 (11:30 +0100)]
drm/crtc-helpers: WARN when used with atomic drivers
Motivated by an oversight of mine when looking at the atomic bochs
conversion. For consistency also switch over to the same style as used
elsewhere (e.g. in drm_mode_set_config_internal).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110103045.26821-1-daniel.vetter@ffwll.ch
Sam Ravnborg [Tue, 8 Jan 2019 19:29:39 +0000 (20:29 +0100)]
drm: remove drmP.h from drm_gem_cma_helper.h
With all dependencies fixed we can now remove
drmP.h from drm_gem_cma_helper.h.
It is replaced by the include files required,
or forward declarations as appropritate.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-13-sam@ravnborg.org
Sam Ravnborg [Tue, 8 Jan 2019 19:29:38 +0000 (20:29 +0100)]
drm/tinydrm: do not reply on drmP.h from drm_gem_cma_helper.h
drmP.h was the only header file in the past and a lot
of files rely on that drmP.h defines everything.
The goal is to one day to delete drmP.h and
as a step towards this it will no longer be included in the
headers files in include/drm/
To prepare tinydrm/ for this add dependencies that
othwewise was pulled in by drmP.h from drm_gem_cma_helper.h
To avoid that tinydrm.h became "include everything",
push include files to the individual drivers.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-12-sam@ravnborg.org
Sam Ravnborg [Tue, 8 Jan 2019 19:29:36 +0000 (20:29 +0100)]
drm/arc: do not rely on drmP.h from drm_gem_cma_helper.h
drmP.h was the only header file in the past and a lot
of files rely on that drmP.h defines everything.
The goal is to one day to delete drmP.h and
as a step towards this it will no longer be included in the
headers files in include/drm/
To prepare arc/ for this add dependencies that
othwewise was pulled in by drmP.h from drm_gem_cma_helper.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
[danvet: Fix typo in commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-10-sam@ravnborg.org
Sam Ravnborg [Tue, 8 Jan 2019 19:29:34 +0000 (20:29 +0100)]
drm: remove include of drmP.h from drm_encoder_slave.h
No further changes required.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-8-sam@ravnborg.org
Sam Ravnborg [Tue, 8 Jan 2019 19:29:33 +0000 (20:29 +0100)]
drm: remove include of drmP.h from bridge/dw_hdmi.h
drmP.h is an relic from the days when there was a single header file.
To enable the removal of drmP.h from all users drop include
of drmP.h from bridge/dw_hdmi.h.
A few files relied on the file included in drmP.h - add explicit
include statements or forward declarations to these files.
Build tested with arm and x86.
v2:
- prefer forward declarations when possible (Laurent Pinchart)
- sort include files (Laurent Pinchart)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-7-sam@ravnborg.org
Kuo-Hsin Yang [Tue, 8 Jan 2019 07:45:17 +0000 (15:45 +0800)]
drm/gem: Mark pinned pages as unevictable
The gem drivers use shmemfs to allocate backing storage for gem objects.
On Samsung Chromebook Plus, the drm/rockchip driver may call
rockchip_gem_get_pages -> drm_gem_get_pages -> shmem_read_mapping_page
to pin a lot of pages, breaking the page reclaim mechanism and causing
oom-killer invocation.
E.g. when the size of a zone is 3.9 GiB, the inactive_ratio is 5. If
active_anon / inactive_anon < 5 and all pages in the inactive_anon lru
are pinned, page reclaim would keep scanning inactive_anon lru without
reclaiming memory. It breaks page reclaim when the rockchip driver only
pins about 1/6 of the anon lru pages.
Mark these pinned pages as unevictable to avoid the premature oom-killer
invocation. See also similar patch on i915 driver [1].
[1]: https://patchwork.freedesktop.org/patch/msgid/
20181106132324.17390-1-chris@chris-wilson.co.uk
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108074517.209860-1-vovoy@chromium.org
Sam Ravnborg [Tue, 8 Jan 2019 19:29:30 +0000 (20:29 +0100)]
drm: make drm_framebuffer.h self contained
Add forward declaration and pull in include
file to make drm_framebuffer.h self contained.
While add it order include files alphabetically.
The use of TASK_COMM_LEN is the reason for including sched.h.
I could not see any good way to avoid this dependency,
and users of drm_framebuffer.comm already use
TASK_COMM_LEN to check for length etc.
v2:
- Added forward declaration of drm_gem_object (Noralf)
- Added ack from Noralf
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-4-sam@ravnborg.org
Sam Ravnborg [Tue, 8 Jan 2019 19:29:29 +0000 (20:29 +0100)]
drm: move DRM_SWITCH_POWER defines to drm_device.h
Move DRM_SWITCH_POWER out of drmP.h to allow users
to get rid of the drmP include.
Moved to drm_device.h because drm_device.switch_power_state
is the only user.
Converted to enum and added sparse kerneldoc comments.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-3-sam@ravnborg.org
Sam Ravnborg [Tue, 8 Jan 2019 19:29:28 +0000 (20:29 +0100)]
drm: drm_device.h: update comments to kernel-doc style
Updated comment style to kernel-doc format in drm_device.h
In struct drm_device there are 12 struct members without doc:
- registered
- filelist_mutex
- filelist
- irq
- vbl_lock
- event_lock
- hose
- sigdata
- sigdata.context
- sigdata.lock
- agp_buffer_map
- agp_buffer_token
They all need proper documentation, a task left for someone
that knows their usage.
drm_device is not plugged into Documentation/gpu/drm-internals.rst
as this would create a new load of warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-2-sam@ravnborg.org
Shayenne Moura [Thu, 20 Dec 2018 12:27:57 +0000 (10:27 -0200)]
drm: i915: Cleanup drm_display_mode print str
This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in i915 files.
It modifies the print style to standardize the use of DRM_MODE_FMT.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/087e07a388c7c65b6d0ec50db069640e4eb32fdf.1545308167.git.shayenneluzmoura@gmail.com
Shayenne Moura [Thu, 20 Dec 2018 12:27:30 +0000 (10:27 -0200)]
drm: sti: Cleanup drm_display_mode print str
This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in sti files.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Acked-by: Benjamin Gaignard <benjamin;gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c079f461575aece9d598784da25aaadc711a2729.1545308167.git.shayenneluzmoura@gmail.com
Shayenne Moura [Thu, 20 Dec 2018 12:26:55 +0000 (10:26 -0200)]
drm: meson: Cleanup on drm_display_mode print str
This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in meson files.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7017942bbbb3e0e6c1e2bd854ea5a5f461784ac4.1545308167.git.shayenneluzmoura@gmail.com
Shayenne Moura [Thu, 20 Dec 2018 12:26:10 +0000 (10:26 -0200)]
drm: omapdrm: Cleanup drm_display_mode print str
This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in omapdrm files.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cb6079fa6de6fda8d865a1d2a61d7cf10019ae88.1545308167.git.shayenneluzmoura@gmail.com
Gustavo A. R. Silva [Tue, 8 Jan 2019 16:21:52 +0000 (10:21 -0600)]
qxl: Use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190108162152.GA25361@embeddedor
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ezequiel Garcia [Tue, 8 Jan 2019 14:59:30 +0000 (11:59 -0300)]
drm/virtio: Drop deprecated load/unload initialization
Move the code around so the driver is probed the bus
.probe and removed from the bus .remove callbacks.
This commit is just a cleanup and shouldn't affect
functionality.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190108145930.15080-1-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Wu [Sun, 23 Dec 2018 00:55:07 +0000 (01:55 +0100)]
drm/fb-helper: fix leaks in error path of drm_fb_helper_fbdev_setup
After drm_fb_helper_fbdev_setup calls drm_fb_helper_init,
"dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will
have some effect). After that, drm_fb_helper_initial_config is called
which may call the "fb_probe" driver callback.
This driver callback may call drm_fb_helper_defio_init (as is done by
drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs)
as documented. These are normally cleaned up on exit by
drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini.
If an error occurs after "fb_probe", but before setup is complete, then
calling just drm_fb_helper_fini will leak resources. This was triggered
by
df2052cc922 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"):
[ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
[ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38)
[ 50.011456] [drm] Initialized bochs-drm 1.0.0
20130925 for 0000:00:02.0 on minor 2
[ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0
[ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1
[ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0
...
[ 50.023155] Call Trace:
[ 50.023155] ? bochs_kms_fini+0x1e/0x30
[ 50.023155] ? bochs_unload+0x18/0x40
This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n.
Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian
Link: https://lkml.kernel.org/r/20181223004315.GA11455@al
Fixes:
8741216396b2 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl
Noralf Trønnes [Sat, 5 Jan 2019 18:18:46 +0000 (19:18 +0100)]
drm/fb-helper: generic: Fix setup error path
If register_framebuffer() fails during fbdev setup we will leak the
framebuffer, the GEM buffer and the shadow buffer for defio. This is
because drm_fb_helper_fbdev_setup() just calls drm_fb_helper_fini() on
error not taking into account that register_framebuffer() can fail.
Since the generic emulation uses DRM client for its framebuffer and
backing buffer in addition to a shadow buffer, it's necessary to open code
drm_fb_helper_fbdev_setup() to properly handle the error path.
Error cleanup is removed from .fb_probe and is handled by one function for
all paths.
Fixes:
9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation")
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105181846.26495-1-noralf@tronnes.org
Gerd Hoffmann [Wed, 19 Dec 2018 12:27:01 +0000 (13:27 +0100)]
drm/virtio: drop virtio_gpu_fence_cleanup()
Just call drm_fence_put directly instead.
Also set vgfb->fence to NULL after dropping the reference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181219122708.4586-4-kraxel@redhat.com
Gerd Hoffmann [Wed, 19 Dec 2018 12:27:00 +0000 (13:27 +0100)]
drm/virtio: fix pageflip flush
Sending the flush command only makes sense if we actually have
a framebuffer attached to the scanout (handle != 0).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181219122708.4586-3-kraxel@redhat.com
Gerd Hoffmann [Wed, 19 Dec 2018 12:26:59 +0000 (13:26 +0100)]
drm/virtio: log error responses
If we got an error response code from the host, print it to the log.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181219122708.4586-2-kraxel@redhat.com
Ezequiel Garcia [Wed, 2 Jan 2019 17:55:07 +0000 (14:55 -0300)]
drm/virtio: Add missing virtqueue reset
As per the VirtIO spec, the virtqueues must be reset during cleanup
(see "3.3.1 Driver Requirements: Device Cleanup").
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190102175507.4653-2-ezequiel@collabora.com
Ezequiel Garcia [Wed, 2 Jan 2019 17:55:06 +0000 (14:55 -0300)]
drm/virtio: Remove incorrect kfree()
The virtio_gpu_output is a member of struct virtio_gpu_device
and is not a dynamically-allocated chunk, so it's wrong to kfree() it.
Removing it fixes a memory corruption BUG() that can be triggered
when the virtio-gpu driver is removed.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190102175507.4653-1-ezequiel@collabora.com
Daniel Vetter [Mon, 7 Jan 2019 10:22:38 +0000 (11:22 +0100)]
drm/todo: Better defio support in the generic fbdev emulation
The current one essentially means you need CMA or a vmalloc backed
object, which makes fbdev emulation a special case.
Since implementing this will be quite a bit of work, capture the idea
in a TODO.
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107102238.7789-1-daniel.vetter@ffwll.ch
Maxime Ripard [Mon, 7 Jan 2019 15:43:24 +0000 (16:43 +0100)]
Merge tag 'topic/drmp-cleanup-2019-01-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next
Make some drm headers self-contained with includes and forward declarations
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
# gpg: Signature made Wed 02 Jan 2019 10:47:51 AM CET
# gpg: using RSA key
1565A65B77B0632E1124E59CD398079D26ABEE6F
# gpg: Can't check signature: No public key
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pntfl6pa.fsf@intel.com
YueHaibing [Sat, 29 Dec 2018 02:49:07 +0000 (10:49 +0800)]
drm: Fix error handling in drm_legacy_addctx
'ctx->handle' is unsigned, it never less than zero.
This patch use int 'tmp_handle' to handle the err condition.
Fixes:
62968144e673 ("drm: convert drm context code to use Linux idr")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181229024907.12852-1-yuehaibing@huawei.com
Chris Wilson [Sun, 30 Dec 2018 12:28:42 +0000 (12:28 +0000)]
drm: Reorder set_property_atomic to avoid returning with an active ww_ctx
Delay the drm_modeset_acquire_init() until after we check for an
allocation failure so that we can return immediately upon error without
having to unwind.
WARNING: lock held when returning to user space!
4.20.0+ #174 Not tainted
------------------------------------------------
syz-executor556/8153 is leaving the kernel with locks still held!
1 lock held by syz-executor556/8153:
#0:
000000005100c85c (crtc_ww_class_acquire){+.+.}, at:
set_property_atomic+0xb3/0x330 drivers/gpu/drm/drm_mode_object.c:462
Reported-by: syzbot+6ea337c427f5083ebdf2@syzkaller.appspotmail.com
Fixes:
144a7999d633 ("drm: Handle properties in the core for atomic drivers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181230122842.21917-1-chris@chris-wilson.co.uk
Jani Nikula [Fri, 28 Dec 2018 08:28:15 +0000 (10:28 +0200)]
drm: forward declare struct drm_file in drm_syncobj.h
drm_syncobj.h uses struct drm_file pointers, forward declare struct
drm_file to make the header self-contained. This prepares for dropping
drmP.h from files including drm_syncobj.h.
Switch from "" to <> includes while at it.
v2: forward declare instead of including drm_file.h (Daniel)
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228082815.10797-1-jani.nikula@intel.com
Jani Nikula [Thu, 27 Dec 2018 12:56:39 +0000 (14:56 +0200)]
drm: include types.h from drm_hdcp.h
drm_hdcp.h uses kernel integer types, make it self-contained by
including linux/kernel.h. This prepares for dropping drmP.h from files
including drm_hdcp.h.
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/adfc79941e827b49eb6186f317cbeff0fb365f33.1545915059.git.jani.nikula@intel.com
Jani Nikula [Thu, 27 Dec 2018 12:56:38 +0000 (14:56 +0200)]
drm: include idr.h from drm_file.h
drm_file.h embeds idr structures in DRM-specific structures. Include the
corresponding header to make drm_file.h self-contained. Make it easier
to drop drmP.h includes.
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2818b15332ab562722dfc324cf977b7eb4a04401.1545915059.git.jani.nikula@intel.com
Jani Nikula [Thu, 27 Dec 2018 12:56:37 +0000 (14:56 +0200)]
drm: include kernel.h and agp_backend.h from intel-gtt.h
intel-gtt.h uses kernel and agp pointers, make it self-contained by
including the relevant headers. This prepares for dropping drmP.h from
files including intel-gtt.h.
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9414800f89d6f326c6e9173233bf6c4dee254d9a.1545915059.git.jani.nikula@intel.com
Jani Nikula [Fri, 28 Dec 2018 13:04:46 +0000 (15:04 +0200)]
drm: un-inline drm_legacy_findmap()
Un-inline drm_legacy_findmap() to not depend on struct drm_device
definition within drm_legacy.h, so that a forward declaration suffices.
Also include drm_hashtab.h in drm_legacy.h to make it more
self-contained. Make it easier to drop drmP.h includes.
v2: avoid including drm_device.h by un-inlining (Daniel)
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228130446.22141-1-jani.nikula@intel.com
Sam Ravnborg [Wed, 26 Dec 2018 21:03:47 +0000 (22:03 +0100)]
drm: move DRM_IF_VERSION to drm_internal.h
Move DRM_IF_VERSION out of drmP.h to allow users
to get rid of the drmP include.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181226210353.13993-1-sam@ravnborg.org
Brajeswar Ghosh [Mon, 24 Dec 2018 14:36:36 +0000 (20:06 +0530)]
drm/drm_drv.c: Remove duplicate header
Remove drm_crtc_internal.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181224143636.GA3237@hp-pavilion-15-notebook-pc-brajeswar
Yangtao Li [Fri, 30 Nov 2018 16:11:01 +0000 (11:11 -0500)]
dma-buf: Change to use DEFINE_SHOW_ATTRIBUTE macro
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130161101.3413-1-tiny.windzz@gmail.com
Gerd Hoffmann [Thu, 20 Dec 2018 10:11:21 +0000 (11:11 +0100)]
drm/bochs: add edid present check
Check header before trying to read the complete edid blob, to avoid the
log being spammed in case qemu has no edid support (old qemu or edid
support turned off).
Fixes:
01f23459cf drm/bochs: add edid support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181220101122.16153-1-kraxel@redhat.com
Boris Brezillon [Thu, 6 Dec 2018 14:24:39 +0000 (15:24 +0100)]
drm/vc4: Attach margin props to the HDMI connector
Now that the plane code takes the margins setup into account, we can
safely attach margin props to the HDMI connector.
We also take care of filling AVI infoframes correctly to expose the
top/botton/left/right bar.
Note that those margin props match pretty well the
overscan_{left,right,top,bottom} properties defined in config.txt and
parsed by the VC4 firmware.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-6-boris.brezillon@bootlin.com
Boris Brezillon [Thu, 6 Dec 2018 14:24:38 +0000 (15:24 +0100)]
drm/vc4: Take margin setup into account when updating planes
Applyin margins is just a matter of scaling all planes appropriately
and adjusting the CRTC X/Y offset to account for the
left/right/top/bottom borders.
Create a vc4_plane_margins_adj() function doing that and call it from
vc4_plane_setup_clipping_and_scaling() so that we are ready to attach
margins properties to the HDMI connector.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-5-boris.brezillon@bootlin.com
Boris Brezillon [Thu, 6 Dec 2018 14:24:37 +0000 (15:24 +0100)]
drm/connector: Allow creation of margin props alone
TV margins properties can only be added as part of the SDTV TV
connector properties creation, but we might need those props for HDMI
TVs too, so let's move the margins props creation in a separate
function and expose it to drivers.
We also add an helper to attach margins props to a connector.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-4-boris.brezillon@bootlin.com
Boris Brezillon [Thu, 6 Dec 2018 14:24:36 +0000 (15:24 +0100)]
drm/connector: Clarify the unit of TV margins
All margins are expressed in pixels. Clarify that in the doc.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-3-boris.brezillon@bootlin.com
Boris Brezillon [Thu, 6 Dec 2018 14:24:35 +0000 (15:24 +0100)]
drm/connector: Fix drm_mode_create_tv_properties() doc
The in the kernel-doc header did not match the function name.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-2-boris.brezillon@bootlin.com
Kuninori Morimoto [Tue, 18 Dec 2018 06:00:24 +0000 (15:00 +0900)]
drm: dw-hdmi-i2s: convert to SPDX identifiers
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lg4n1izg.wl-kuninori.morimoto.gx@renesas.com
Archit Taneja [Thu, 13 Sep 2018 07:53:00 +0000 (13:23 +0530)]
MAINTAINERS: drm: Remove myself as drm-bridge maintainer
I have moved on to other stuff for now. Haven't been able to make time
to review bridge related work. Andrzej has been doing it by himself
for a while now.
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913075300.22510-1-architt@codeaurora.org
emersion [Sun, 16 Dec 2018 18:49:08 +0000 (18:49 +0000)]
drm/vkms: set preferred depth to 24
Otherwise DRM_CAP_DUMB_PREFERRED_DEPTH is zero.
Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/o2SmEP0M6h287Fs5OeL3HtQzTr8uV0PyOhFict_qdxeS7vFvV1Zr8qzRUJh-YnCoJHo13nJgAqqQByzEzTZTqk9R2ExsOszYLj68hQLqBIc=@emersion.fr
Dan Carpenter [Mon, 17 Dec 2018 07:03:44 +0000 (10:03 +0300)]
drm/ati_pcigart: Fix error code in drm_ati_pcigart_init()
The drm_ati_pcigart_init() function was originally suppose to return one
on success and zero on failure, but these days it returns a mix of
zero, one and -ENOMEM on failure.
This patch cleans it up and modifies the caller so now the function
returns zero on success and negative error codes on failure.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217070344.GC12159@kadam
Dan Carpenter [Mon, 17 Dec 2018 07:00:38 +0000 (10:00 +0300)]
drm: Fix an error pointer dereference()
The drm_mode_create_tile_group() is only called from
drm_parse_tiled_block() and the caller expects it to return a NULL on
error. In other words, this function should match
drm_mode_get_tile_group().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217065733.GA12159@kadam
Lyude Paul [Fri, 14 Dec 2018 01:25:31 +0000 (20:25 -0500)]
drm/dp_mst: Refactor drm_dp_update_payload_part1()
This:
- Adds local variables in the first loop, instead of using array indices
everywhere
- Adds an early continue to reduce the indent level in the second loop
There should be no functional changes here
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214012604.13746-3-lyude@redhat.com
Lyude Paul [Fri, 14 Dec 2018 01:25:30 +0000 (20:25 -0500)]
drm/dp_mst: Remove bogus conditional in drm_dp_update_payload_part1()
There's no reason we need this, it's just confusing looking.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Juston Li <juston.li@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214012604.13746-2-lyude@redhat.com
Gerd Hoffmann [Thu, 13 Dec 2018 13:49:15 +0000 (14:49 +0100)]
drm/virtio: switch to generic fbdev emulation
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181213134915.24722-1-kraxel@redhat.com
Shayenne da Luz Moura [Thu, 13 Dec 2018 22:55:37 +0000 (20:55 -0200)]
drm: Remove complete task from TODO documentation
This patch remove the follow complete task from TODO documentation:
drm_mode_config.crtc_idr is misnamed, since it contains all KMS object.
Should be renamed to drm_mode_config.object_idr.
Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213225537.nq4dwidn6tma33iv@smtp.gmail.com
Lyude Paul [Tue, 11 Dec 2018 23:50:26 +0000 (18:50 -0500)]
drm/dp_mst: Fix memory leak in drm_dp_mst_topology_mgr_destroy()
We need to call drm_dp_mst_topology_mgr_set_mst(mgr, false) when
destroying the topology manager in order to ensure that the root mstb
and all of it's descendents are actually destroyed, and additionally to
try to make sure that we leave the hub in a clean state.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181211235026.21758-1-lyude@redhat.com
Shayenne da Luz Moura [Thu, 13 Dec 2018 21:29:57 +0000 (19:29 -0200)]
drm: Rename crtc_idr as object_idr to KMS cleanups
This patch solves this TODO task:
drm_mode_config.crtc_idr is misnamed, since it contains all KMS object.
Should be renamed to drm_mode_config.object_idr.
Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
[danvet: resolve conflict with addition of privobj_list.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213212957.vkitkyl5cj2qh7qr@smtp.gmail.com
Heiko Stuebner [Fri, 30 Nov 2018 10:24:49 +0000 (11:24 +0100)]
drm/rockchip: Add implicit fencing support for planes
Render like lima will attach a fence to the framebuffer dma_buf,
so the display driver should wait for it to finish before showing
the framebufferto prevent tearing.
Generally tested on rk3188, rk3288, rk3328 and rk3399 and
together with an actual lima-based kmscube on rk3188 and rk3328.
Suggested-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130102449.6430-1-heiko@sntech.de
Daniel Vetter [Mon, 10 Dec 2018 10:03:58 +0000 (11:03 +0100)]
drm/xen: Don't set the dpms hook
Doesn't do anything for atomic.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xen.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210100359.22507-7-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 10 Dec 2018 10:03:57 +0000 (11:03 +0100)]
drm/qxl: Don't set the dpms hook
Doesn't do anything with atomic.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210100359.22507-6-daniel.vetter@ffwll.ch
Christian König [Tue, 11 Dec 2018 10:34:41 +0000 (18:34 +0800)]
drm/syncobj: remove drm_syncobj_cb and cleanup
This completes "drm/syncobj: Drop add/remove_callback from driver
interface" and cleans up the implementation a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/266255/
Christian König [Fri, 7 Dec 2018 19:10:17 +0000 (20:10 +0100)]
drm/etnaviv: fix for 64bit seqno change
The fence seqno is now 64bit, fixes build warning.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/267136/
Rob Clark [Mon, 22 Oct 2018 12:31:22 +0000 (14:31 +0200)]
drm/atomic: integrate modeset lock with private objects
Follow the same pattern of locking as with other state objects. This
avoids boilerplate in the driver.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022123122.30468-1-boris.brezillon@bootlin.com
Ville Syrjälä [Fri, 28 Sep 2018 18:04:00 +0000 (21:04 +0300)]
drm/dp/mst: Validate REMOTE_I2C_READ harder
Make sure i2c msgs we're asked to transfer conform to the
requirements of REMOTE_I2C_READ. We were only checking that the
last message is a read, but we must also check that the preceding
messages are all writes. Also check that the length of each
message isn't too long.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-2-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Ville Syrjälä [Fri, 28 Sep 2018 18:03:59 +0000 (21:03 +0300)]
drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers
We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.
To quote the E-DDC spec:
"... this standard requires that the segment pointer be
reset to 00h when a NO ACK or a STOP condition is received."
Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.
Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
YueHaibing [Sat, 8 Dec 2018 08:36:25 +0000 (08:36 +0000)]
drm/ast: Remove set but not used variable 'bo'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/ast/ast_fb.c: In function 'astfb_create':
drivers/gpu/drm/ast/ast_fb.c:194:17: warning:
variable 'bo' set but not used [-Wunused-but-set-variable]
It never used since introduction in commit
312fec1405dd ("drm: Initial KMS
driver for AST (ASpeed Technologies) 2000 series (v2)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544258185-50430-1-git-send-email-yuehaibing@huawei.com
Daniel Vetter [Wed, 28 Nov 2018 22:12:34 +0000 (23:12 +0100)]
drm/dp-mst-helper: Remove hotplug callback
When everyone implements it exactly the same way, among all 4
implementations, there's not really a need to overwrite this at all.
Aside: drm_kms_helper_hotplug_event is pretty much core functionality
at this point. Probably should move it there.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128221234.15054-1-daniel.vetter@ffwll.ch
Boris Brezillon [Fri, 7 Dec 2018 08:36:06 +0000 (09:36 +0100)]
drm/vc4: Add support for X/Y reflection
Add support for X/Y reflection when the plane is using linear or
T-tiled formats. X/Y reflection hasn't been tested on SAND formats, so
we reject them until proper testing/debugging has been done.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207083606.15449-2-boris.brezillon@bootlin.com
Boris Brezillon [Fri, 7 Dec 2018 08:36:05 +0000 (09:36 +0100)]
drm/vc4: Fix negative X/Y positioning on SAND planes
Commit
3e407417b192 ("drm/vc4: Fix X/Y positioning of planes using
T_TILES modifier") fixed the problem with T_TILES format, but left
things in a non-working state for SAND formats. Address that now.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207083606.15449-1-boris.brezillon@bootlin.com
Eric Anholt [Mon, 3 Dec 2018 22:24:38 +0000 (14:24 -0800)]
drm/v3d: Invalidate the caches from the outside in.
This would be a fairly obscure race, but let's make sure we don't ever
lose it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-6-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Eric Anholt [Mon, 3 Dec 2018 22:24:37 +0000 (14:24 -0800)]
drm/v3d: Stop trying to flush L2C on V3D 3.3+
This cache was replaced with the slice accessing the L2T in the newer
generations. Noted by Dave during review.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-5-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Eric Anholt [Mon, 3 Dec 2018 22:24:36 +0000 (14:24 -0800)]
drm/v3d: Drop the wait for L2T flush to complete.
According to Dave, once you've started an L2T flush, all L2T accesses
will be blocked until the flush completes. This fixes a consistent
3-4ms stall between the ioctl and running the job, and 3DMMES Taiji
goes from 27fps to 110fps.
v2: Leave a note about why we don't need to wait for completion.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes:
57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-4-eric@anholt.net
Eric Anholt [Mon, 3 Dec 2018 22:24:35 +0000 (14:24 -0800)]
drm/v3d: Don't bother flushing L1TD at job start.
This is the write combiner for TMU writes. You're supposed to flush
that at job end if you had dirtied any cachelines. Flushing it at job
start then doesn't make any sense.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes:
57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-3-eric@anholt.net
Eric Anholt [Mon, 3 Dec 2018 22:24:34 +0000 (14:24 -0800)]
drm/v3d: Drop unused v3d_flush_caches().
Now that I've specified how the end-of-pipeline flushing should work,
we're never going to use this function.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-2-eric@anholt.net
Eric Anholt [Mon, 3 Dec 2018 22:24:33 +0000 (14:24 -0800)]
drm/v3d: Document cache flushing ABI.
Right now, userspace doesn't do any L2T writes, but we should lay out
our expectations for how it works.
v2: Explicitly mention the VCD cache flushing requirements and that
we'll flush the other caches before each of the CLs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-1-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Mika Kuoppala [Fri, 7 Dec 2018 12:34:28 +0000 (14:34 +0200)]
drm/i915: Compile fix for 64b dma-fence seqno
Many errs of the form:
drivers/gpu/drm/i915/selftests/intel_hangcheck.c: In function ‘__igt_reset_evict_vma’:
./include/linux/kern_levels.h:5:18: error: format ‘%x’ expects argument of type ‘unsigned int’, but argum
Fixes:
b312d8ca3a7c ("dma-buf: make fence sequence numbers 64 bit v2")
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207123428.16257-1-mika.kuoppala@linux.intel.com